ISSN 1977-0677 |
||
Official Journal of the European Union |
L 259 |
|
![]() |
||
English edition |
Legislation |
Volume 62 |
|
|
III Other acts |
|
|
|
EUROPEAN ECONOMIC AREA |
|
|
* |
|
|
Corrigenda |
|
|
* |
|
|
|
(1) Text with EEA relevance. |
EN |
Acts whose titles are printed in light type are those relating to day-to-day management of agricultural matters, and are generally valid for a limited period. The titles of all other Acts are printed in bold type and preceded by an asterisk. |
II Non-legislative acts
REGULATIONS
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/1 |
COMMISSION DELEGATED REGULATION (EU) 2019/1689
of 29 May 2019
correcting the Romanian language version of Delegated Regulation (EU) 2018/1229 supplementing Regulation (EU) No 909/2014 of the European Parliament and of the Council with regard to regulatory technical standards on settlement discipline
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 909/2014 of the European Parliament and of the Council of 23 July 2014 on improving securities settlement in the European Union and on central securities depositories and amending Directives 98/26/EC and 2014/65/EU and Regulation (EU) No 236/2012 (1) and in particular Article 6(5) and Article 7(15) thereof,
Whereas:
(1) |
The Romanian language version of Commission Delegated Regulation (EU) 2018/1229 (2) contains an error in Article 42 as regards the entry into force of the act. |
(2) |
Delegated Regulation (EU) 2018/1229 should therefore be corrected accordingly. The other language versions are not affected, |
HAS ADOPTED THIS REGULATION:
Article 1
(does not concern the English language)
Article 2
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 29 May 2019.
For the Commission
The President
Jean-Claude JUNCKER
(1) OJ L 257, 28.8.2014, p. 1.
(2) Commission Delegated Regulation (EU) 2018/1229 of 25 May 2018 supplementing Regulation (EU) No 909/2014 of the European Parliament and of the Council with regard to regulatory technical standards on settlement discipline (OJ L 230, 13.9.2018, p. 1).
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/2 |
COMMISSION IMPLEMENTING REGULATION (EU) 2019/1690
of 9 October 2019
renewing the approval of the active substance alpha-cypermethrin, as a candidate for substitution, in accordance with Regulation (EC) No 1107/2009 of the European Parliament and of the Council concerning the placing of plant protection products on the market, and amending the Annex to Commission Implementing Regulation (EU) No 540/2011
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1107/2009 of the European Parliament and of the Council of 21 October 2009 concerning the placing of plant protection products on the market and repealing Council Directives 79/117/EEC and 91/414/EEC (1), and in particular Article 20(1) in conjunction with Article 24(1) thereof,
Whereas:
(1) |
Commission Directive 2004/58/EC (2) included alpha-cypermethrin as an active substance in Annex I to Council Directive 91/414/EEC (3). |
(2) |
Active substances included in Annex I to Directive 91/414/EEC are deemed to have been approved under Regulation (EC) No 1107/2009 and are listed in Part A of the Annex to Commission Implementing Regulation (EU) No 540/2011 (4). |
(3) |
The approval of the active substance alpha-cypermethrin, as set out in Part A of the Annex to Implementing Regulation (EU) No 540/2011, expires on 31 July 2020. |
(4) |
An application for the renewal of the approval of alpha-cypermethrin was submitted in accordance with Article 1 of Commission Implementing Regulation (EU) No 844/2012 (5) within the time period provided for in that Article. |
(5) |
The applicant submitted the supplementary dossiers required in accordance with Article 6 of Implementing Regulation (EU) No 844/2012. The application was found to be complete by the rapporteur Member State. |
(6) |
The rapporteur Member State prepared a draft renewal assessment report in consultation with the co-rapporteur Member State and submitted it to the European Food Safety Authority (‘the Authority’) and the Commission on 7 May 2017. |
(7) |
The Authority communicated the draft renewal assessment report to the applicant and to the Member States for comments and forwarded the comments received to the Commission. The Authority also made the supplementary summary dossier available to the public. |
(8) |
On 7 August 2018, the Authority communicated to the Commission its conclusion (6) on whether alpha-cypermethrin can be expected to meet the approval criteria provided for in Article 4 of Regulation (EC) No 1107/2009. The Commission presented the renewal report for alpha-cypermethrin to the Standing Committee on Plants, Animals, Food and Feed on 24 and 25 January 2019. |
(9) |
The applicant was given the opportunity to submit comments on the draft renewal report. |
(10) |
As regards the new criteria to identify endocrine disrupting properties introduced by Commission Regulation (EU) 2018/605 (7), the conclusion of the Authority indicates that it is highly unlikely that alpha-cypermethrin is an endocrine disrupter via the estrogenic, steroidogenic and thyroid modalities. Furthermore, the available evidence indicates that alpha-cypermethrin is unlikely to be an endocrine disruptor via the androgenic modality. Thus, the Commission considers that alpha-cypermethrin is not to be considered as having endocrine disrupting properties. |
(11) |
It has been established with respect to one or more representative uses of at least one plant protection product containing the active substance that the approval criteria provided for in Article 4 of Regulation (EC) No 1107/2009 are satisfied. |
(12) |
The risk assessment for the renewal of the approval of alpha-cypermethrin is based on a limited number of representative uses, which however do not restrict the uses for which plant protection products containing alpha-cypermethrin may be authorised. It is therefore appropriate not to maintain the restriction to use as an insecticide only. |
(13) |
The Commission, however, considers that alpha-cypermethrin is a candidate for substitution pursuant to Article 24 of Regulation (EC) No 1107/2009. Some of its toxicological reference values are significantly lower than those of the majority of the approved active substances within groups of substances. Alpha-cypermethrin, therefore fulfils the condition set in the first indent of point 4 of Annex II to Regulation (EC) No 1107/2009. |
(14) |
It is therefore appropriate to renew the approval of alpha-cypermethrin as a candidate for substitution pursuant to Article 24 of Regulation (EC) No 1107/2009. |
(15) |
In accordance with Article 14(1) of Regulation (EC) No 1107/2009 in conjunction with Article 6 thereof and in the light of current scientific and technical knowledge, it is, however, necessary to provide for certain conditions. It is, in particular, appropriate to require further confirmatory information. |
(16) |
The Commission considers that alpha-cypermethrin does not have endocrine disrupting properties based on the available scientific information summarised in the conclusion of the Authority. However, in order to increase the confidence in this conclusion, the applicant should provide an updated assessment for the androgenic modality, in accordance with point 2.2(b) of Annex II to Regulation (EC) No 1107/2009, of the criteria laid down in points 3.6.5 and 3.8.2 of Annex II to Regulation (EC) No 1107/2009, as amended by Regulation (EU) 2018/605 and in accordance with the guidance for the identification of endocrine disruptors (8). |
(17) |
Implementing Regulation (EU) No 540/2011 should therefore be amended accordingly. |
(18) |
Commission Implementing Regulation (EU) 2019/707 (9) extended the expiry date of alpha-cypermethrin to 31 July 2020 in order to allow the renewal process to be completed before the expiry of the approval of that substance. However, given that a decision on renewal has been taken ahead of that extended expiry date, this Regulation should start to apply earlier than that date. |
(19) |
The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed, |
HAS ADOPTED THIS REGULATION:
Article 1
Renewal of the approval of the active substance as a candidate for substitution
The approval of the active substance alpha-cypermethrin, as a candidate for substitution, is renewed as set out in Annex I.
Article 2
Amendments to Implementing Regulation (EU) No 540/2011
The Annex to Implementing Regulation (EU) No 540/2011 is amended in accordance with Annex II to this Regulation.
Article 3
Entry into force and date of application
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
It shall apply from 1 November 2019.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 9 October 2019.
For the Commission
The President
Jean-Claude JUNCKER
(1) OJ L 309, 24.11.2009, p. 1.
(2) Commission Directive 2004/58/EC of 23 April 2004 amending Council Directive 91/414/EEC to include alpha-cypermethrin, benalaxyl, bromoxynil, desmedipham, ioxynil and phenmedipham as active substances (OJ L 120, 24.4.2004, p. 26).
(3) Council Directive 91/414/EEC of 15 July 1991 concerning the placing of plant protection products on the market (OJ L 230, 19.8.1991, p. 1).
(4) Commission Implementing Regulation (EU) No 540/2011 of 25 May 2011 implementing Regulation (EC) No 1107/2009 of the European Parliament and of the Council as regards the list of approved active substances (OJ L 153, 11.6.2011, p. 1).
(5) Commission Implementing Regulation (EU) No 844/2012 of 18 September 2012 setting out the provisions necessary for the implementation of the renewal procedure for active substances, as provided for in Regulation (EC) No 1107/2009 of the European Parliament and of the Council concerning the placing of plant protection products on the market (OJ L 252, 19.9.2012, p. 26).
(6) EFSA Journal 2018;16(8):5403.
(7) Commission Regulation (EU) 2018/605 of 19 April 2018 amending Annex II to Regulation (EC) No 1107/2009 by setting out scientific criteria for the determination of endocrine disrupting properties. (OJ L 101, 20.4.2018, p. 33).
(8) Guidance for the identification of endocrine disruptors in the context of Regulations (EU) No 528/2012 and (EC) No 1107/2009. https://efsa.onlinelibrary.wiley.com/doi/10.2903/j.efsa.2018.5311
(9) Commission Implementing Regulation (EU) 2019/707 of 7 May 2019 amending Implementing Regulation (EU) No 540/2011 as regards the extension of the approval periods of the active substances alpha-cypermethrin, beflubutamid, benalaxyl, benthiavalicarb, bifenazate, boscalid, bromoxynil, captan, cyazofamid, desmedipham, dimethoate, dimethomorph, diuron, ethephon, etoxazole, famoxadone, fenamiphos, flumioxazine, fluoxastrobin, folpet, foramsulfuron, formetanate, metalaxyl-m, methiocarb, metribuzin, milbemectin, Paecilomyces lilacinus strain 251, phenmedipham, phosmet, pirimiphos-methyl, propamocarb, prothioconazole, s-metolachlor and tebuconazole (OJ L 120, 8.5.2019, p. 16).
ANNEX I
Common Name, Identification Numbers |
IUPAC Name |
Purity (1) |
Date of approval |
Expiration of approval |
Specific provisions |
||||||||||||||
alpha-cypermethrin CAS No 67375-30-8 CIPAC No 454 |
Racemate comprising: (R)-α-cyano-3-phenoxybenzyl (1S,3S)-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate and (S)-α-cyano-3-phenoxybenzyl (1R,3R)-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate or (R)-α-cyano-3 phenoxybenzyl-(1S)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate and (S)-α-cyano-3 phenoxybenzyl-(1R)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate |
≥ 980 g/kg The manufacturing impurity hexane is considered to be of toxicological concern and must not exceed 1 g/kg in the technical material. |
1 November 2019 |
31 October 2026 |
For the implementation of the uniform principles, as referred to in Article 9(6) of Regulation (EC) No 1107/2009, the conclusions of the renewal report on alpha-cypermethrin, and in particular Appendices I and II thereto, shall be taken into account.In this overall assessment Member States shall pay particular attention to:
Conditions of use shall include risk mitigation measures, where appropriate. The applicant shall submit to the Commission, the Member States and the Authority confirmatory information as regards:
The applicant shall submit the information referred to in point 1 by 30 October 2020; the information referred to in point 2 within two years from the date of publication, by the Commission, of a guidance document on evaluation of isomer mixtures; and the information referred to in point 3 within two years from the date of publication, by the Commission, of a guidance document on evaluation of the effect of water treatment processes on the nature of residues present in surface and groundwater. As regards Points 3.6.5 and 3.8.2 of Annex II of Regulation (EC) No 1107/2009, as amended by Regulation (EU) 2018/605 an updated assessment of the information already submitted and, where relevant, further information to confirm the absence of androgenic endocrine activity shall be submitted by 30 October 2021. |
(1) Further details on identity and specification of active substance are provided in the renewal report.
ANNEX II
The Annex to Implementing Regulation (EU) No 540/2011 is amended as follows:
(1)
in Part A, entry 83 on alpha-cypermethrin is deleted;
(2)
in Part E, the following entry is added:
No |
Common Name, Identification Numbers |
IUPAC Name |
Purity (*) |
Date of approval |
Expiration of approval |
Specific provisions |
||||||||||||||
‘12 |
alpha-cypermethrin CAS No 67375-30-8 CIPAC No 454 |
Racemate comprising: (R)-α-cyano-3-phenoxybenzyl (1S,3S)-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate and (S)-α-cyano-3-phenoxybenzyl (1R,3R)-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate or (R)-α-cyano-3 phenoxybenzyl-(1S)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate and (S)-α-cyano-3 phenoxybenzyl-(1R)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate |
≥ 980 g/kg The manufacturing impurity hexane is considered to be of toxicological concern and must not exceed 1 g/kg in the technical material |
1 November 2019 |
31 October 2026 |
For the implementation of the uniform principles, as referred to in Article 9(6) of Regulation (EC) No 1107/2009, the conclusions of the renewal report on alpha-cypermethrin, and in particular Appendices I and II thereto, shall be taken into account.In this overall assessment Member States shall pay particular attention to:
Conditions of use shall include risk mitigation measures, where appropriate. The applicant shall submit to the Commission, the Member States and the Authority confirmatory information as regards:
The applicant shall submit the information referred to in point 1 by 30 October 2020; the information referred to in point 2 within two years from the date of publication, by the Commission, of a guidance document on evaluation of isomer mixtures; and the information referred to in point 3 within two years from the date of publication, by the Commission, of a guidance document on evaluation of the effect of water treatment processes on the nature of residues present in surface and groundwater. As regards Points 3.6.5 and 3.8.2 of Annex II of Regulation (EC) No 1107/2009, as amended by Regulation (EU) 2018/605 an updated assessment of the information already submitted and, where relevant, further information to confirm the absence of androgenic endocrine activity shall be submitted by 30 October 2021.’ |
(*1) Further details on the identity and the specification of the active substance are provided in the renewal report.
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/9 |
COMMISSION REGULATION (EU) 2019/1691
of 9 October 2019
amending Annex V to Regulation (EC) No 1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (1), and in particular Article 131 thereof,
Whereas:
(1) |
Annex V to Regulation (EC) No 1907/2006 contains a list of substances that are exempt from the obligation to register in accordance with Article 2(7)(b) of that Regulation. |
(2) |
Digestate is a residual semisolid or liquid material that has been sanitised and stabilised by a biological treatment process, of which the last step is an anaerobic digestion step, and where the inputs used in that process are biodegradable materials originating only from non-hazardous source segregated materials, such as food waste, manure and energy crops. Biogas resulting from the same process as digestate or from other anaerobic digestion processes, as well as compost resulting from the aerobic decomposition process of similar biodegradable materials, are already listed in Annex V to Regulation (EC) No 1907/2006. Therefore, digestate that is either not waste or has ceased to be waste should also be listed in that Annex, as it is inappropriate and unnecessary to require that substance to be registered and as its exemption from Titles II, V and VI of Regulation (EC) No 1907/2006 does not prejudice the objectives of that Regulation. |
(3) |
So far, no registrations have been submitted for digestate. The listing of digestate in Annex V of Regulation (EC) No 1907/2006 should clarify that digestate is exempted from registration, for reasons analogous to those that justify the existing exemption of compost and biogas, thereby removing uncertainties encountered by producers and users of digestate and by enforcement authorities. |
(4) |
Annex V to Regulation (EC) No 1907/2006 should therefore be amended accordingly. |
(5) |
The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 133 of Regulation (EC) No 1907/2006, |
HAS ADOPTED THIS REGULATION:
Article 1
Annex V to Regulation (EC) No 1907/2006 is amended in accordance with the Annex to this Regulation.
Article 2
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 9 October 2019.
For the Commission
The President
Jean-Claude JUNCKER
ANNEX
In Annex V to Regulation (EC) No 1907/2006, point 12 is replaced by the following:
‘12. |
Compost, biogas and digestate.’. |
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/12 |
COMMISSION IMPLEMENTING REGULATION (EU) 2019/1692
of 9 October 2019
on the application of certain registration and data-sharing provisions of Regulation (EC) No 1907/2006 of the European Parliament and of the Council after the expiry of the final registration deadline for phase-in substances
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (1), and in particular Article 132 thereof,
Whereas:
(1) |
In order to avoid overloading authorities and natural or legal persons with the work arising from the registration of substances that were already on the internal market when Regulation (EC) No 1907/2006 entered into force, Article 23 of that Regulation established a transitional regime for phase-in substances. Consequently, a number of different transitional deadlines for the registration of such substances were laid down. It follows from Article 23(3) of that Regulation that the final registration deadline in that transitional regime expired on 1 June 2018. |
(2) |
In order to ensure equality between market operators manufacturing or placing on the market phase-in and non-phase-in substances, it is necessary to specify the applicability, after the expiry of the transitional regime, of provisions that laid down favourable conditions for the registration of phase-in substances. Therefore, for those provisions, an appropriate, reasonable and clear cut-off date should be set, after which those provisions should either no longer apply or only apply in specific circumstances. |
(3) |
Article 3(30) of Regulation (EC) No 1907/2006 sets conditions for the calculation of the quantities per year of phase-in substances based on the average production or import volumes for the three preceding calendar years. In order to ensure that market operators have sufficient time to make the necessary adjustments to their calculation methods, those conditions should, as a first measure, continue to apply until the specified cut-off date. To take into account the definition of ‘per year’ in Article 3(30) of Regulation (EC) No 1907/2006, it is appropriate to set the cut-off date at the end of this calendar year (31 December 2019). |
(4) |
In line with the legislator’s intent to reduce the possible impact of registration obligations on low volume substances, Article 12(1)(b) of Regulation (EC) No 1907/2006 lays down less stringent information requirements for the registration of certain low volume phase-in substances, provided that they do not meet the criteria in Annex III to Regulation (EC) No 1907/2006. Pursuant to Article 23(3) of that Regulation, those low volume phase-in substances needed to be registered by the deadline for registration on 1 June 2018. However after this deadline, to ensure equal treatment for registrants that join a registration or update their dossiers in accordance with Article 12(1)(b), that provision should, as a second measure, continue to apply after 1 June 2018. |
(5) |
On 1 June 2018, the formal operation of substance information exchange fora (SIEFs) ceased. However, as a third measure, the continuing data-sharing obligations of registrants should be reinforced and registrants should be encouraged to use similar informal communication platforms to enable them to meet their continuing registration and data-sharing obligations under both Regulation (EC) No 1907/2006 and Commission Implementing Regulation (EU) 2016/9 (2). |
(6) |
It is appropriate to set out, as a fourth measure, that a potential registrant who pre-registered a phase-in substance in accordance with Article 28 of Regulation (EC) No 1907/2006 should, until the specified cut-off date, not be required to follow the inquiry process set out in Article 26 of that Regulation because the objective of the inquiry process has already been fulfilled through the pre-registration. |
(7) |
It is necessary to ensure that data-sharing dispute processes are clearly identifiable. The data-sharing rules set out in Article 30 of Regulation (EC) No 1907/2006 should therefore continue to apply until the specified cut-off date. After that cut-off date, only the data-sharing rules in Articles 26 and 27 of that Regulation should apply. |
(8) |
The measures provided for in this Regulation are in accordance with the opinion of the Committee established under Article 133 of Regulation (EC) No 1907/2006, |
HAS ADOPTED THIS REGULATION:
Article 1
Calculation of quantities of phase-in substances
The specific method for calculating quantities per year of phase-in substances, as set out in Article 3(30) of Regulation (EC) No 1907/2006, shall continue to apply only until 31 December 2019. Once a registrant has completed the registration of a substance, that registrant shall subsequently calculate his quantity of that substance per calendar year in accordance with Article 3(30) of Regulation (EC) No 1907/2006.
Article 2
Registration requirements for certain low volume phase-in substances
The expiry of the transitional regime for phase-in substances in Regulation (EC) No 1907/2006 shall not affect the applicability of Article 12(1)(b) of that Regulation.
Article 3
Data-sharing obligations after registration
After registering a substance, registrants, including those who jointly submit data with other registrants, shall continue to fulfil their data-sharing obligations in a fair, transparent and non-discriminatory way as specified in Title III of Regulation (EC) No 1907/2006 and in Implementing Regulation (EU) 2016/9. In that context, registrants may use informal communication platforms similar to the substance information exchange fora referred to in Article 29 of Regulation (EC) No 1907/2006.
Article 4
Duty to inquire and sharing of data for phase-in substances
1. Where data-sharing negotiations conducted in accordance with Article 30 of Regulation (EC) No 1907/2006 result in failure to reach an agreement, the provisions of that Article shall apply only until 31 December 2019.
2. After 31 December 2019, pre-registrations made in accordance with Article 28 of Regulation (EC) No 1907/2006 shall no longer be valid and Articles 26 and 27 shall apply to all phase-in substances.
Article 5
Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 9 October 2019.
For the Commission
The President
Jean-Claude JUNCKER
(1) OJ L 396 30.12.2006, p. 1.
(2) Commission Implementing Regulation (EU) 2016/9 of 5 January 2016 on joint submission of data and data-sharing in accordance with Regulation (EC) No 1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (OJ L 3, 6.1.2016, p. 41).
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/15 |
COMMISSION IMPLEMENTING REGULATION (EU) 2019/1693
of 9 October 2019
imposing a provisional anti-dumping duty on imports of steel road wheels originating in the People’s Republic of China
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) 2016/1036 of the European Parliament and of the Council of 8 June 2016 on protection against dumped imports from countries not members of the European Union (1), and in particular Article 7 thereof,
After consulting the Member States,
Whereas:
1. PROCEDURE
1.1. Initiation
(1) |
On 15 February 2019, the European Commission (‘the Commission’) initiated an anti-dumping investigation with regard to imports into the Union of steel road wheels (‘SRW’) originating in the People’s Republic of China (‘PRC’ or ‘the country concerned’) on the basis of Article 5 of Regulation (EU) 2016/1036 (‘the basic Regulation’). It published a Notice of Initiation in the Official Journal of the European Union (2) (‘Notice of Initiation’). |
(2) |
The Commission initiated the investigation following a complaint lodged on 3 January 2019 by the Association of European Wheels Manufacturers (‘EUWA’ or ‘the complainant’) on behalf of producers representing more than 25 % of the total Union production of steel road wheels. The complaint contained evidence of dumping and of resulting material injury that was sufficient to justify the initiation of the investigation. |
(3) |
Following the Notice of Initiation the Commission received a number of questions and comments concerning the definition of the product concerned. In this respect, the Commission clarified the product scope in the notice amending the Notice of Initiation (3). |
(4) |
Pursuant to Article 14(5a) of the basic Regulation, the Commission shall register imports subject to an anti-dumping investigation during the period of pre-disclosure unless it has sufficient evidence that certain requirements are not met. One of these requirements, as mentioned in Article 10(4)(d) of the basic Regulation, is that there is a further substantial rise in imports in addition to the level of imports which caused injury during the investigation period. According to Eurostat data, imports in kilograms of SRW from the PRC declined during the first four months following the initiation of the investigation (i.e. from March 2019 to June 2019) by 72 % as compared with the same period in 2018 and by 74 % in relation to the four months average during the investigation period (2018 — see recital (23)). The Commission further observes that the import volumes of the product concerned according to Surveillance 2 database show a similar strong decrease in imports. Therefore, the Commission did not make imports of the product concerned subject to registration under Article 14(5a) of the basic Regulation as the second substantive condition of Article 10(4), i.e. a further substantial rise in imports, was not met. |
1.2. Interested parties
(5) |
In the Notice of Initiation, the Commission invited interested parties to contact it in order to participate in the investigation. In addition, the Commission specifically informed the complainant, other known Union producers, the known exporting producers and the PRC authorities, known importers and users about the initiation of the investigation and invited them to participate. |
(6) |
Interested parties had the opportunity to comment on the initiation of the investigation and to request a hearing with the Commission and/or the Hearing Officer in trade proceedings. |
1.3. Sampling
(7) |
In the Notice of Initiation, the Commission stated that it might sample the interested parties in accordance with Article 17 of the basic Regulation. |
1.3.1. Sampling of Union producers
(8) |
In the Notice of Initiation, the Commission stated that it had decided to limit its investigation to a reasonable number the Union producers by applying sampling, and that it had provisionally selected a sample of Union producers. The Commission selected the sample on the basis of the information available to the Commission at initiation stage. It was based on the volume of production and sales of the like product in the EU during the investigation period. This sample consisted of three Union producers. The sampled Union producers, located in three different Member States, accounted for over 35 % of the estimated total EU production and sales volume of the like product. The Commission invited interested parties to comment on the provisional sample. Only EUWA made comments and asked for the inclusion of an additional company in order to improve the representativity of the sample. Following these comments, the Commission decided to add one company. However, that Union producer refused to co-operate with the investigation. The provisional sample consisting of three Union producers was thus confirmed. The sample is representative of the Union industry. |
(9) |
The sampled Union producers as well as the other Union producers participating in this investigation have requested the Commission that their identity is kept confidential throughout the proceeding, pursuant to Article 19 of the basic Regulation, on grounds of a fear of retaliatory measures by some of their customers. The Commission, based on good cause shown in the request, accepted to grant anonymity to the Union producers. |
1.3.2. Sampling of importers
(10) |
To decide whether sampling was necessary and, if so, to select a sample, the Commission asked unrelated importers to provide the information specified in the Notice of Initiation. |
(11) |
Two unrelated importers provided the requested information. In view of the low number, the Commission decided that sampling was not necessary. |
1.3.3. Sampling of exporting producers in the PRC
(12) |
To decide whether sampling was necessary and, if so, to select a sample, the Commission asked all exporting producers in PRC to provide the information specified in the Notice of Initiation. In addition, the Commission asked the Mission of the People’s Republic of China to the European Union to identify and/or contact other exporting producers, if any, that could be interested in participating in the investigation. |
(13) |
Twenty-seven companies in the country concerned provided the requested information and agreed to be included in the sample. The Commission found twenty exporting producers/groups of exporting producers to be admissible to the sample. Seven producers reported no exports of the product concerned to the EU during the investigation period and therefore were not considered admissible to the sample. In accordance with Article 17(1) of the basic Regulation, the Commission selected a sample of three companies, which could reasonably be investigated within the time available. The basis for the selection of the sample were the largest volumes of exports to the Union but consideration was also given to covering in the sample all types of SRW (SRW used for passenger and commercial purposes). |
(14) |
In accordance with Article 17(2) of the basic Regulation, all known exporting producers concerned, and the authorities of the country concerned, were consulted on the selection of the sample. No comments were made. |
(15) |
Subsequently, one of the sampled companies refused to cooperate and was replaced by the next largest exporting producer. |
(16) |
Following the verification visit, given the significant shortcomings of the information provided by one sampled exporting producer, the Commission decided to disregard this information on the basis of Article 18(1) of the basic Regulation (4). |
(17) |
Furthermore, as a result of the exclusion of certain types of products from the scope of this investigation as set out in Section 2.3 below, one of the cooperating sampled exporting producers was no longer concerned by this investigation. |
(18) |
As a result of the above, the sample was reduced to only one company, covering around 20 % of the Chinese exports of the product concerned to the Union in the investigation period. Taking into account the degree of non-cooperation in the sample and insufficient time to select a new sample, the Commission provisionally decided on the basis of Article 17(4) of the basic Regulation to apply the relevant provisions of Article 18 of the basic Regulation. |
1.4. Individual examination
(19) |
Originally, ten of the exporting producers that returned the sampling form requested individual examination under Article 17(3) of the basic Regulation. The Commission made the questionnaire available online on the day of the initiation. Moreover, when announcing the sample, the Commission informed the exporting producers that were not sampled that they were required to provide a questionnaire reply if they wished to be examined individually. However, none of the companies followed with a submission of the questionnaire reply. Therefore, no individual examination was granted. |
1.5. Questionnaire replies and verification visits
(20) |
The Commission sent a questionnaire concerning the existence of significant distortions in PRC within the meaning of Article 2(6a)(b) of the basic Regulation to the Government of the People’s Republic of China (‘GOC’). The questionnaires for the Union producers, importers, users, and exporting producers were made available online (5) on the day of initiation. |
(21) |
Questionnaire replies were received from the three sampled Union producers and the three sampled exporting producers. One unrelated importer provided the Commission with a questionnaire reply; however, that reply was incomplete and the party stopped its cooperation with the investigation when it was requested to further complete its questionnaire reply. No reply was received from the GOC. |
(22) |
The Commission sought and verified all the information deemed necessary for a provisional determination of dumping, resulting injury and Union interest. Verification visits pursuant to Article 16 of the basic Regulation were carried out at the premises of the following parties: Union producers
Association of Union producers
Exporting producers in the PRC
|
1.6. Investigation period and period considered
(23) |
The investigation of dumping and injury covered the period from 1 January 2018 to 31 December 2018 (‘the investigation period’). The examination of trends relevant for the assessment of injury covered the period from 1 January 2015 to the end of the investigation period (‘the period considered’). |
1.7. Procedure for the determination of the normal value under Article 2(6a) of the basic Regulation
(24) |
In view of the sufficient evidence available at the initiation of the investigation pointing to the existence of significant distortions within the meaning of point (b) of Article 2(6a) of the basic Regulation, the Commission considered it appropriate to initiate the investigation having regard to Article 2(6a) of the basic Regulation. |
(25) |
Consequently, in order to collect the necessary data for the eventual application of Article 2(6a) of the basic Regulation, in the Notice of Initiation the Commission invited all exporting producers in the country concerned to provide the information requested in Annex III to the Notice of the Initiation regarding the inputs used for producing SRW. Twenty-three exporting producers submitted the relevant information. |
(26) |
In order to obtain information it deemed necessary for its investigation with regard to the alleged significant distortions within the meaning of point (b) of Article 2(6a) of the basic Regulation, the Commission also sent a questionnaire to the GOC. No reply was received from the GOC. Subsequently, the Commission informed the GOC that it would use facts available within the meaning of Article 18 of the basic Regulation for the determination of the existence of the significant distortions in the PRC. |
(27) |
In the Notice of Initiation, the Commission also invited all interested parties to make their views known, submit information and provide supporting evidence regarding the appropriateness of the application of Article 2(6a) of the basic Regulation within 37 days of the date of publication of this Notice in the Official Journal of the European Union. One exporting producer made comments on the existence of significant distortions. |
(28) |
In the Notice of Initiation, the Commission also specified that, in view of the evidence available, it may need to select an appropriate representative country pursuant to Article 2(6a)(a) of the basic Regulation for the purpose of determining the normal value based on undistorted prices or benchmarks. |
(29) |
On 6 March 2019, the Commission published a first note for the file (‘the Note of 6 March 2019’) (6) seeking the views of the interested parties on the relevant sources that the Commission may use for the determination of the normal value, in accordance with Article 2(6a)(e) second ident of the basic Regulation. In that note, the Commission provided a list of all factors of production such as materials, energy and labour used in the production of the product concerned by the exporting producers. In addition, based on the criteria guiding the choice of undistorted prices or benchmarks, the Commission identified possible representative countries (namely, Argentina, Brazil, Colombia, Malaysia, Mexico, Russia, South Africa, Thailand and Turkey). |
(30) |
The Commission gave all interested parties the opportunity to comment. The Commission received comments from one exporting producer and the complainant. The GOC did not provide any comments. |
(31) |
The Commission addressed the comments received on the Note of 6 March 2019 in the second note on the sources for the determination of the normal value of 16 April 2019 (‘the Note of 16 April 2019’) (7). The Commission also established the list of factors of production and concluded that, at that stage, Brazil was the most appropriate representative country under Article 2(6a)(a), first indent of the basic Regulation. At that stage, it was not possible to determine a definitive list of the HS codes under which the factors of production should be classified. Since there were no imports under some of the potential HS codes into Brazil, the Commission concluded at that stage that Turkey and South Africa could also be considered as an appropriate representative country if necessary. The Commission invited interested parties to comment. The Commission received comments only from the complainant. This Regulation addresses those comments. |
2. PRODUCT CONCERNED AND LIKE PRODUCT
2.1. Product concerned
(32) |
The product concerned, as amended by the notice referred to in recital (3) is road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, designed for
originating in PRC, currently falling within CN codes ex 8708 70 10, ex 8708 70 99 and ex 8716 90 90 (TARIC codes 8708701080, 8708701085, 8708709920, 8708709980, 8716909095 and 8716909097) (‘the product concerned’). |
(33) |
The following products are excluded:
|
2.2. Like product
(34) |
The investigation showed that the following products have the same basic physical, chemical and technical characteristics as well as the same basic uses:
|
(35) |
The Commission decided at this stage that those products are therefore like products within the meaning of Article 1(4) of the basic Regulation. |
2.3. Claims regarding product scope
(36) |
One of the sampled exporting producers claimed that steel road wheels designed specifically for passenger car trailers and caravans which are classified under CN code 8716 90 90 with a rim diameter equal to or less than 16 inches, should be excluded from the product scope as they are not manufactured in the Union and do not have the same basic technical characteristics as all other products falling within the product scope. |
(37) |
As far as technical characteristics are concerned, the company in question submitted that the specifications for passenger car trailer and caravan wheels, in particular with regard to strength (hence also testing), are lower than for passenger car wheels. Furthermore, they have to meet particular specifications related to the higher load and lower speed requirements of such wheels to be sold in the Union. That would also entail that a steel road wheel for a caravan or a trailer used by a passenger car cannot legally be sold and used as a passenger car steel wheel. The company also indicated that steel road wheels for caravans or trailers used by passenger cars are to be classified under CN code 8716 90 90 whereas steel wheels for passenger cars should be classified under heading 8708. |
(38) |
In the course of the investigation, the Commission furthermore received comments concerning the potential exclusion from the scope of the investigation of wheels for agricultural trailers and other trailed agricultural equipment used in fields, found to have a rim diameter equal to or of less than 16 inches. The Notice of Initiation explicitly excluded ‘wheels for motor vehicles specifically designed for uses other than on public roads (for example, wheels for agricultural tractors or forestry tractors, for forklifts, for pushback tractors, for dumpers designed for off-highway use)’. However, the steel wheels for not mechanically propelled vehicles, such as agricultural trailers and other trailed agricultural equipment used in fields, were originally included in the product scope. It was claimed that like steel wheels for caravans and trailers used by passenger cars, such wheels also have different technical characteristics and are not interchangeable with the other products falling under the product scope. |
(39) |
On 24 June 2019, the Commission published a note to the file inviting all interested parties to comment on the above claims concerning the product scope. The complainant, three exporting producers and one Union importer submitted comments on the above note. All those parties supported the product exclusion claim summarized in recitals (36) and (38) above. |
2.4. Conclusion on product concerned
(40) |
The investigation has shown that the wheels referred to in recitals (36) and (38) have a limited diameter of 16 inches or less and have different technical characteristics than the other types of wheels in the product scope, since they are not meant to, and cannot, be fitted on the motor vehicles themselves. Therefore, the Commission provisionally concluded that these products should be excluded. |
(41) |
Following the exclusion described in the recital (40) above, one of the sampled exporting producers, which produced and exported to the Union only the excluded types of product, is no longer considered an exporting producer of the product concerned. |
(42) |
Therefore, the product concerned is provisionally defined as road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, designed for:
originating in the People’s Republic of China, currently falling within CN codes ex 8708 70 10, ex 8708 70 99 and ex 8716 90 90 (TARIC codes 8708701080, 8708701085, 8708709920, 8708709980, 8716909095, and 8716909097) (‘the product concerned’). The following products are excluded:
|
3. DUMPING
3.1. Preliminary remarks
(43) |
As explained in the recital (17) only two exporting producers remained in the sample and were subsequently verified. |
(44) |
With regard to one of these companies the Commission decided to make use of the provisions of Article 18 of the basic Regulation and in particular first sentence of Article 18(1), and disregarded the information provided. This decision was taken because the reported export sales data were considered to be unreliable, as they could not be reconciled with the audited accounts of the company. Therefore, the Commission did not receive the necessary information to establish a dumping margin for the company. |
(45) |
In accordance with Article 18(4) of the basic Regulation, the interested party was informed of the reasons of disregarding the information provided and was granted the opportunity to provide further explanations. |
(46) |
The company commented on the Commission’s intention to use Article 18 of the basic Regulation and had a hearing with the Hearing Officer in trade proceedings upon its request. Due to the confidential and company-specific nature of the rejected data and the comments provided in the company’s submission and subsequent hearing, the details of the Commission findings in this regard were disclosed to the company in question in a separate specific provisional disclosure. |
(47) |
As the comments made by the company in its submissions and in the hearing with the Hearing Officer did not alter the facts and conclusions established by the Commission during the verification visit at the company’s premises, the Commission provisionally confirmed the use of facts available with regard to this exporting producer. |
(48) |
Thus, the description of the dumping margin calculation below refers to the sole remaining company in the sample. |
3.2. Normal value
(49) |
According to Article 2(1) of the basic Regulation, ‘the normal value shall normally be based on the prices paid or payable, in the ordinary course of trade, by independent customers in the exporting country’. |
(50) |
However, according to Article 2(6a)(a) of the basic Regulation, ‘(i)n case it is determined […] that it is not appropriate to use domestic prices and costs in the exporting country due to the existence in that country of significant distortions within the meaning of point (b), the normal value shall be constructed exclusively on the basis of costs of production and sale reflecting undistorted prices or benchmarks’, and ‘shall include an undistorted and reasonable amount of administrative, selling and general costs and for profits’. As further explained below, the Commission concluded in the present investigation that, based on the evidence available and in view of the lack of cooperation of the GOC, the application of Article 2(6a) of the basic Regulation was appropriate. |
3.2.1. Existence of significant distortions
3.2.1.1.
(51) |
Article 2(6a)(b) of the basic Regulation defines ‘significant distortions are those distortions which occur when reported prices or costs, including the costs of raw materials and energy, are not the result of free market forces as they are affected by substantial government intervention. In assessing the existence of significant distortions regard shall be had, inter alia, to the potential impact of one or more of the following elements:
|
(52) |
According to Article 2(6a)(b) of the basic Regulation, the assessment of the existence of significant distortions within the meaning of Article 2(6a)(a) shall take into account, amongst others, the non-exhaustive list of elements in the former provision. Pursuant to Article 2(6a)(b) of the basic Regulation, in assessing the existence of significant distortions, regard shall be had to the potential impact of one or more of these elements on prices and costs in the exporting country of the product concerned. Indeed, as that list is non-cumulative, not all the elements need to be given regard to for a finding of significant distortions. Moreover, the same factual circumstances may be used to demonstrate the existence of one or more of the elements of the list. However, any conclusion on significant distortions within the meaning of Article 2(6a)(a) must be made on the basis of all the evidence at hand. The overall assessment on the existence of distortions may also take into account the general context and situation in the exporting country, in particular where the fundamental elements of the exporting country’s economic and administrative set-up provides the government with substantial powers to intervene in the economy in such a way that prices and costs are not the result of the free development of market forces. |
(53) |
Article 2(6a)(c) of the basic Regulation provides that ‘[w]here the Commission has well-founded indications of the possible existence of significant distortions as referred to in point (b) in a certain country or a certain sector in that country, and where appropriate for the effective application of this Regulation, the Commission shall produce, make public and regularly update a report describing the market circumstances referred to in point (b) in that country or sector’. |
(54) |
Pursuant to this provision, the Commission has issued a country report concerning the PRC (hereinafter ‘the Report’), (8) showing the existence of substantial government intervention at many levels of the economy, including specific distortions in many key factors of production (such as land, energy, capital, raw materials and labour) as well as in specific sectors (such as steel and chemicals). The Report was placed on the investigation file at the initiation stage. The complaint also contained some relevant evidence complementing the Report. Interested parties were invited to rebut, comment or supplement the evidence contained in the investigation file at the time of initiation. |
(55) |
The complaint contained updated information on the overcapacity in steel production, which is the main raw material for the manufacturing of the product concerned accounting for more than 60 % of the costs of manufacturing. It referred to a report by the European Union Chamber of Commerce in China (9), according to which the PRC had failed to deliver on its promises to cut the production capacity to more realistic levels. This situation was specifically driven by:
|
(56) |
The complainant also claimed that the Chinese domestic demand could not sustain elevated steel production levels. To this end, the complaint referred to the World Steel Association, which reported that the monthly production volumes increased in the PRC by 9,1 % in October 2018 in comparison to October 2017 while increasing only by 5,8 % on average in the 64 countries reporting to the World Steel Association. |
(57) |
The complaint contained information that the increased production of steel in the PRC, in combination with a reduction of exports resulting from recently imposed trade remedies by the European Union and the United States, could result in a decline in steel prices. |
(58) |
Finally, the complaint referred to further practices affecting the prices of raw materials:
|
(59) |
As indicated in recitals (26) and (27) respectively, the GOC did not comment or provide evidence supporting or rebutting the existing evidence on the case file, including the Report and the additional evidence provided by the complainant, on the existence of significant distortions and/or on the appropriateness of the application of Article 2(6a) of the basic Regulation in the case at hand. |
(60) |
Comments in this regard were received only from one of the exporting producers, which claimed that the calculation of the normal value pursuant to Article 2(6a) of the basic Regulation is incompatible with the WTO Agreements, including China’s Protocol of Accession to the WTO (‘Protocol’) and the Anti-Dumping Agreement (‘ADA’). |
(61) |
In this respect, the exporting producer claimed that after the expiry of Section 15 of the Protocol, the EU should not deviate from the standard methodology in establishing the normal value that is to use only domestic prices and costs of the exporting country, unless the ADA permits otherwise. In light of the above, the EU should follow the standard methodology in accordance with Article 2 of the ADA. Moreover, the interested party also claimed that the notion of significant distortions does not even exist in the ADA. As there is no legal basis in the ADA or in GATT 1994 for such specific action, the findings of the existence of significant distortions and, as a result of it, the construction of the normal value is not consistent with Articles 1, 2, 6.1 and 18.1 of the ADA. |
(62) |
For the purpose of this investigation the Commission has concluded in recital (112) that it is appropriate to apply Article 2(6a) of the Basic Regulation. The Commission does not agree with the submission of the interested party that the Commission must not apply Article 2(6a). On the contrary, the Commission considers that Article 2(6a) is applicable and must be applied in the circumstances of this case. In addition, the Commission considers that this provision is consistent with the European Union’s WTO obligations. It is the Commission’s view that, as clarified in DS473 EU-Biodiesel (Argentina), the provisions of the Basic Regulation that apply generally with respect to all WTO Members, in particular Article 2(5), second sub-paragraph, permit the use of data from a third country, duly adjusted when such adjustment is necessary and substantiated. Finally, in anti-dumping proceedings concerning products from China, the parts of Section 15 of China’s Accession Protocol that have not expired continue to apply when determining normal value, both with respect to the market economy standard and with respect to the use of a methodology that is not based on a strict comparison with Chinese prices or costs. |
(63) |
The exporting producer further argued that the complainant did not provide any evidence of significant distortions on the steel wheel market itself but rather based its claims on distortions on the situation on the Chinese steel market. |
(64) |
The Commission noted that any comments on the situation of the Chinese steel market are relevant for the product concerned itself since, as a steel product, it can be considered a part of the steel sector. In fact, steel represents more than 60 % of the costs of manufacturing of the product concerned. Moreover, the main raw material used in the manufacturing of SRW is hot-rolled flat steel (‘HRS’) accounted for more than 50 % of the total costs of production, which is also produced on the Chinese steel market and for which findings on distortions were confirmed in previous trade defence investigations (11). |
(65) |
The Commission examined whether it was appropriate or not to use domestic prices and costs in the PRC, due to the existence of significant distortions within the meaning of point (b) of Article 2(6a) of the basic Regulation. The Commission did so on the basis of the evidence available on the file, including the evidence contained in the Report, which relies on publicly available sources. That analysis covered the examination of the substantial government interventions in the PRC’s economy in general, but also the specific market situation in the relevant sector including the product concerned. |
3.2.1.2.
(66) |
The Chinese economic system is based on the concept of ‘socialist market economy’. That concept is enshrined in the Chinese Constitution and determines the economic governance of the PRC. The core principle is the ‘socialist public ownership of the means of production, namely, ownership by the whole people and collective ownership by the working people’. The State-owned economy is the ‘leading force of the national economy’ and the State has the mandate ‘to ensure its consolidation and growth’ (12). Consequently, the overall setup of the Chinese economy not only allows for substantial government interventions into the economy, but such interventions are expressly mandated. The notion of supremacy of public ownership over the private one permeates the entire legal system and is emphasized as a general principle in all central pieces of legislation. The Chinese property law is a prime example: it refers to the primary stage of socialism and entrusts the State with upholding the basic economic system under which the public ownership plays a dominant role. Other forms of ownership are tolerated, with the law permitting them to develop side by side with the State ownership (13). |
(67) |
In addition, under Chinese law, the socialist market economy is developed under the leadership of the Chinese Communist Party (‘CCP’). The structures of the Chinese State and of the CCP are intertwined at every level (legal, institutional, personal), forming a superstructure in which the roles of CCP and the State are indistinguishable. Following an amendment of the Chinese Constitution in March 2018, the leading role of the CCP was given an even greater prominence by being reaffirmed in the text of Article 1 of the Constitution. Following the already existing first sentence of the provision: ‘[t]he socialist system is the basic system of the People’s Republic of China’ a new second sentence was inserted which reads: ‘[t]he defining feature of socialism with Chinese characteristics is the leadership of the Communist Party of China.’ (14) This illustrates the unquestioned and ever-growing control of the CCP over the economic system of the PRC. This leadership and control is inherent to the Chinese system and goes well beyond the situation customary in other countries where the governments exercise general macroeconomic control within the boundaries of which free market forces are at play. |
(68) |
The Chinese State engages in an interventionist economic policy in pursuance of goals, which coincide with the political agenda set by the CCP rather than reflecting the prevailing economic conditions in a free market (15). The interventionist economic tools deployed by the Chinese authorities are manifold, including the system of industrial planning, the financial system, as well as the level of the regulatory environment. |
(69) |
First, on the level of overall administrative control, the direction of the Chinese economy is governed by a complex system of industrial planning which affects all economic activities within the country. The totality of these plans covers a comprehensive and complex matrix of sectors and crosscutting policies and is present on all levels of government. Plans at provincial level are detailed while national plans set broader targets. Plans also specify the means in order to support the relevant industries/sectors as well as the timeframes in which the objectives need to be achieved. Some plans still contain explicit output targets while this was a regular feature in previous planning cycles. Under the plans, individual industrial sectors and/or projects are being singled out as (positive or negative) priorities in line with the government priorities and specific development goals are attributed to them (industrial upgrade, international expansion, etc.). The economic operators, private and State-owned alike, must effectively adjust their business activities according to the realities imposed by the planning system. This is not only because of the binding nature of the plans but also because the relevant Chinese authorities at all levels of government adhere to the system of plans and use their vested powers accordingly, thereby inducing the economic operators to comply with the priorities set out in the plans (see also section 3.2.1.5 below) (16). |
(70) |
Second, on the level of allocation of financial resources, the financial system of the PRC is dominated by the State-owned commercial banks. Those banks, when setting up and implementing their lending policy need to align themselves with the government’s industrial policy objectives rather than primarily assessing the economic merits of a given project (see also section 3.2.1.8 below) (17). The same applies to the other components of the Chinese financial system, such as the stock markets, bond markets, private equity markets, etc. Also these parts of the financial sector other than the banking sector are institutionally and operationally set up in a manner not geared towards maximizing the efficient functioning of the financial markets but towards ensuring control and allowing intervention by the State and the CCP (18). |
(71) |
Third, on the level of regulatory environment, the interventions by the State into the economy take a number of forms. For instance, the public procurement rules are regularly used in pursuit of policy goals other than economic efficiency, thereby undermining market based principles in the area. The applicable legislation specifically provides that public procurement shall be conducted in order to facilitate the achievement of goals designed by State policies. However, the nature of these goals remains undefined, thereby leaving broad margin of appreciation to the decision-making bodies (19). Similarly, in the area of investment, the GOC maintains significant control and influence over the destination and magnitude of both State and private investment. Investment screening as well as various incentives, restrictions, and prohibitions related to investment are used by authorities as an important tool for supporting industrial policy goals, such as maintaining State control over key sectors or bolstering domestic industry (20). |
(72) |
In sum, the Chinese economic model is based on certain basic axioms, which provide for and encourage manifold government interventions. Such substantial government interventions are at odds with the free play of market forces, resulting in distorting the effective allocation of resources in line with market principles (21). |
3.2.1.3.
(73) |
In the PRC, enterprises operating under the ownership, control and/or policy supervision or guidance by the State represent an essential part of the economy. |
(74) |
The GOC and the CCP maintain structures that ensure their continued influence over enterprises, and in particular State-owned enterprises (SOEs). The State (and in many aspects also the CCP) not only actively formulates and oversees the implementation of general economic policies by individual SOEs, but it also claims its rights to participate in operational decision-making in SOEs. This is typically done through rotation of cadres between government authorities and SOEs, through presence of party members on SOEs executive bodies and of party cells in companies (see also section 3.2.1.4), as well as through shaping the corporate structure of the SOE sector (22). In exchange, SOEs enjoy a particular status within the Chinese economy, which entails a number of economic benefits, in particular shielding from competition and preferential access to relevant inputs, including finance (23). |
(75) |
Specifically in the steel sector, a substantial degree of ownership by the GOC persists. While the nominal split between the number of SOEs and privately owned companies is estimated to be almost even, from the five Chinese steel producers ranked in the top 10 of the world’s largest steel producers four are SOEs (24). At the same time, while the top ten producers only took up some 36 % of total industry output in 2016, the GOC set the target in the same year to consolidate 60 % to 70 % of iron and steel production to around ten large-scale enterprises by 2025 (25). This intention has been repeated by the GOC in April 2019, announcing a release of guidelines on steel industry consolidation (26). Such consolidation may entail forced mergers of profitable private companies with underperforming SOEs (27). |
(76) |
With the high level of government intervention in the steel industry and a high share of SOEs in the sector, even privately owned steel producers are prevented from operating under market conditions. Indeed, both public and privately owned enterprises in the steel sector are also subject to policy supervision and guidance as set out in section 3.2.1.5 below. |
(77) |
Although the producers of SRW in China are predominantly privately owned companies, the state control and interventions on their main raw material market HRS is not excluded from the general framework described above. |
(78) |
It was established that the verified SRW producers purchased their HRS from both SOEs and private suppliers. However, in the light of the findings of several anti-subsidy investigations concerning Chinese hot-rolled steel products or other steel products where HRS was used as a raw material, the most recent of them being an investigation concerning organic coated steel (‘OCS’) (28), the form of the ownership of the HRS producer is not relevant for the findings on distortions. |
(79) |
In the OCS investigation referred to above, the Commission established that SOEs providing OCS producers with hot-rolled steel were public bodies under the test set out by the WTO Appellate Body, as they performed governmental functions and, in doing so, they exercised government authority. Furthermore, the Commission also established that private producers of HRS in the PRC were entrusted and directed by the GOC to provide goods in line with Articles 3(1)(a)(iii) and 3(1)(a)(iv) of the basic Anti-subsidy Regulation (29) and acted in the same way as steel SOEs. Finally, it was established that the prices of HRS in the PRC were distorted. This was a result of the strong predominance of SOEs in the HRS market in the PRC and because the prices of HRS of private suppliers were aligned with the prices of SOEs. |
(80) |
Furthermore, most auto manufacturing companies are still (partially) state owned. Foreign automakers have formed joint ventures with larger SOEs, as foreign shareholding has been restricted since 1994 (30). |
(81) |
On the basis of the above, it is concluded that the SRW market in the PRC was served to a significant extent by enterprises subject to the ownership, control or policy supervision or guidance by the GOC. |
3.2.1.4.
(82) |
Apart from exercising control over the economy by means of ownership of SOEs and other tools, the GOC is in position to interfere with prices and costs through State presence in firms. While the right to appoint and to remove key management personnel in SOEs by the relevant State authorities, as provided for in the Chinese legislation, can be considered to reflect the corresponding ownership rights, (31) CCP cells in enterprises, state owned and private alike, represent another important channel through which the State can interfere with business decisions. According to the PRC’s company law, a CCP organisation is to be established in every company (with at least three CCP members as specified in the CCP Constitution (32)) and the company shall provide the necessary conditions for the activities of the party organisation. In the past, this requirement appears not to have always been followed or strictly enforced. However, since at least 2016 the CCP has reinforced its claims to control business decisions in SOEs as a matter of political principle. The CCP is also reported to exercise pressure on private companies to put ‘patriotism’ first and to follow party discipline (33). In 2017, it was reported that party cells existed in 70 % of some 1,86 million privately owned companies, with growing pressure for the CCP organisations to have a final say over the business decisions within their respective companies (34). These rules are of general application throughout the Chinese economy, across all sectors, including to the producers of SRW and the suppliers of their inputs. |
(83) |
Specifically in the steel sector, as already pointed out, many of the major steel producers (including HRS producers) are owned by the State. Some are specifically referred to in the ‘Steel Industry Adjustment and Upgrading plan for 2016-2020’ (35) as examples of the achievements of the 12th five-year planning period (such as Baosteel, Anshan Iron and Steel, Wuhan Iron and Steel, etc.). The public documents of the State-owned HRS producers sometimes stress the connection with the GOC. For example, Baoshan Iron & Steel (or Baosteel) stated in the 2016 Semi-Annual Report that ‘[t]he company committed itself to matching regional 13th Five Year planning and reached wide consensus with local governments in sharing resources, connecting urban industries and building ecological environment’ (36). In the recent anti-subsidy investigation of certain hot-rolled flat products of iron, non-alloy or other alloy steel (‘HRS’) originating in China (37), the Commission established that three of the four sampled groups of exporting producers were SOEs. In all three groups, the Chairmen of the Board or the President also acted as the Party Committee Secretary of the group’s CCP organisation. |
(84) |
Intervention by the GOC is also present in the automotive industry. For example, the Annual Report 2018 of SAIC Motor, an automotive SOE, stated that ‘[t]hanks to vigorous promotion of state governments and the unremitting endeavors of the automobile enterprises, China has ascended itself to the largest global new energy automotive market with booming and globally leading new technologies and new models like Intelligent & Connected Vehicles (ICV) and mobility sharing, and takes the lead in writing the new era of world auto industry.’ (38) |
(85) |
The State’s presence and intervention in the financial markets (see also section 3.2.1.8 below) as well as in the provision of raw materials and inputs further have an additional distorting effect on the SRW market (39). Thus, the State presence in firms, including SOEs, in the steel, automotive and other sectors (such as the financial and input sectors) allow the GOC to interfere with respect to prices and costs. |
3.2.1.5.
(86) |
The direction of the Chinese economy is to a significant degree determined by an elaborate system of planning which sets out priorities and prescribes the goals the central and local governments must focus on. Relevant plans exist on all levels of government and cover virtually all economic sectors. The objectives set by the planning instruments are of binding nature and the authorities at each administrative level monitor the implementation of the plans by the corresponding lower level of government. Overall, the system of planning in the PRC results in resources being driven to sectors designated as strategic or otherwise politically important by the government, rather than being allocated in line with market forces (40). |
(87) |
The steel industry, including the production of SRW, is regarded as a key industry by the GOC (41). This is confirmed in the numerous plans, directives and other documents focused on steel, which are issued at national, regional and municipal level such as the ‘Steel Industry Adjustment and Upgrading plan for 2016-2020’. This Plan states that the steel industry is ‘an important, fundamental sector of the Chinese economy, a national cornerstone’ (42). The main tasks and objectives set out in this Plan cover all aspects of the development of the industry (43). |
(88) |
The 13th Five-Year Plan on Economic and Social Development (44) envisages support to enterprises producing high-end steel product types (45). It also focuses on achieving product quality, durability and reliability by supporting companies using technologies related to clean steel production, precision rolling and quality improvement (46). |
(89) |
The ‘Catalogue for Guiding Industry Restructuring (2011 Version) (2013 Amendment)’ (47) (‘the Catalogue’) lists iron and steel as encouraged industries. The applicability of the Catalogue was confirmed by the recent anti-subsidy investigation of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the PRC (48). |
(90) |
The GOC further guides the development of the sector in accordance with a broad range of policy tools and directives related to, inter alia: market composition and restructuring, raw materials, investment, capacity elimination, product range, relocation, upgrading, etc. Through these and other means, the GOC directs and controls virtually every aspect in the development and functioning of the sector (including SRW). (49) The current problem of overcapacity is arguably the clearest illustration of the implications of the GOC’s policies and the resulting distortions. |
(91) |
With regard to the automotive industry, the Policy on Development of Automotive Industry provided for a foreign shareholding restriction in auto manufacturing joint ventures, which was still in force in the investigation period. Therefore, also the customers of the SRW producers were subject to measures discriminating in favour of domestic producers. |
(92) |
In sum, the GOC has measures in place to induce operators to comply with the public policy objectives of supporting encouraged industries, including the production of HRS as the main raw material used in the manufacturing of the product concerned as well as SRW, as part of the encouraged steel sector. Such measures impede market forces from operating normally. |
3.2.1.6.
(93) |
According to the information on file, the Chinese bankruptcy system delivers inadequately on its own main objectives such as to fairly settle claims and debts and to safeguard the lawful rights and interests of creditors and debtors. This appears to be rooted in the fact that while the Chinese bankruptcy law formally rests on principles that are similar to those applied in corresponding laws in countries other than the PRC, the Chinese system is characterised by systematic under-enforcement. The number of bankruptcies remains notoriously low in relation to the size of the country’s economy, not least because the insolvency proceedings suffer from a number of shortcomings, which effectively function as a disincentive for bankruptcy filings. Moreover, the role of the State in the insolvency proceedings remains strong and active, often having direct influence on the outcome of the proceedings (50). |
(94) |
In addition, the shortcomings of the system of property rights are particularly obvious in relation to ownership of land and land-use rights in the PRC. (51) All land is owned by the Chinese State (collectively owned rural land and State-owned urban land). Its allocation remains solely dependent on the State. There are legal provisions that aim at allocating land use rights in a transparent manner and at market prices, for instance by introducing bidding procedures. However, these provisions are regularly not respected, with certain buyers obtaining their land for free or below market rates (52). Moreover, authorities often pursue specific political goals including the implementation of the economic plans when allocating land (53). |
(95) |
Much like other sectors in the Chinese economy, the producers of SRW are subject to the ordinary rules on Chinese bankruptcy, corporate, and property laws. That has the effect that these companies, too, are subject to the top-down distortions arising from the discriminatory application or inadequate enforcement of bankruptcy and property laws. The present investigation revealed nothing that would call those findings into question. As such, the Commission preliminarily concluded that the Chinese bankruptcy and property laws do not work properly, thus generating distortions when maintaining insolvent firms afloat and when allocating land use rights in the PRC. Those considerations, on the basis of the evidence available, appear to be fully applicable also in the steel sector and more specifically with respect to HRS (as the main input used in the manufacturing of the product concerned) as well as with respect to SRW as part of the steel sector. In particular, the Commission has established that HRS producers (54) benefited from the provision of land use rights for less than adequate remuneration. |
(96) |
In light of the above, the Commission concluded that there was discriminatory application or inadequate enforcement of bankruptcy and property laws in the steel sector, including with respect to the product concerned. |
3.2.1.7.
(97) |
A system of market-based wages cannot fully develop in the PRC as workers and employers are impeded in their rights to collective organisation. The PRC has not ratified a number of essential conventions of the International Labour Organisation (‘ILO’), in particular those on freedom of association and on collective bargaining (55). Under national law, only one trade union organisation is active. However, this organisation lacks independence from the State authorities and its engagement in collective bargaining and protection of workers’ rights remains rudimentary (56). Moreover, the mobility of the Chinese workforce is restricted by the household registration system, which limits access to the full range of social security and other benefits to local residents of a given administrative area. This typically results in workers who are not in possession of the local residence registration finding themselves in a vulnerable employment position and receiving lower income than the holders of the residence registration. (57) Those findings lead to the distortion of wage costs in the PRC. |
(98) |
No evidence was submitted to the effect that the steel sector, including the producers of SRW and HRS, would not be subject to the Chinese labour law system described. The SRW and HRS parts of the steel sector are thus affected by the distortions of wage costs both directly (when making the product concerned or the main raw material for its production) as well as indirectly (when having access to capital or inputs from companies subject to the same labour system in the PRC). |
3.2.1.8.
(99) |
Access to capital for corporate actors in the PRC is subject to various distortions. |
(100) |
Firstly, the Chinese financial system is characterised by the strong position of State-owned banks (58), which, when granting access to finance, take into consideration criteria other than the economic viability of a project. Similarly to non-financial SOEs, the banks remain connected to the State not only through ownership but also via personal relations (the top executives of large State-owned financial institutions are ultimately appointed by the CCP) (59) and, again just like non-financial SOEs, the banks regularly implement public policies designed by the government. In doing so, the banks comply with an explicit legal obligation to conduct their business in accordance with the needs of the national economic and social development and under the guidance of the industrial policies of the State (60). This is compounded by additional existing rules, which direct finances into sectors designated by the government as encouraged or otherwise important (61). |
(101) |
While it is acknowledged that various legal provisions refer to the need to respect normal banking behaviour and prudential rules such as the need to examine the creditworthiness of the borrower, the overwhelming evidence, including findings made in trade defence investigations, suggests that these provisions play only a secondary role in the application of the various legal instruments. |
(102) |
Furthermore, bond and credit ratings are often distorted for a variety of reasons including the fact that the risk assessment is influenced by the firm’s strategic importance to the GOC and the strength of any implicit guarantee by the government. Estimates strongly suggest that Chinese credit ratings systematically correspond to lower international ratings. (62) |
(103) |
This is compounded by additional existing rules, which direct finances into sectors designated by the government as encouraged or otherwise important (63). This results in a bias for lending to SOEs, large well-connected private firms and firms in key industrial sectors, which implies that the availability and cost of capital is not equal for all players on the market. |
(104) |
Secondly, borrowing costs have been kept artificially low to stimulate investment growth. This has led to the excessive use of capital investment with ever lower returns on investment. This is illustrated by the recent growth in corporate leverage in the state sector despite a sharp fall in profitability, which suggests that the mechanisms at work in the banking system do not follow normal commercial responses. |
(105) |
Thirdly, although nominal interest rate liberalization was achieved in October 2015, price signals are still not the result of free market forces, but are influenced by government induced distortions. Indeed, the share of lending at or below the benchmark rate still represents 45 % of all lending and recourse to targeted credit appears to have been stepped up, since this share has increased markedly since 2015 in spite of worsening economic conditions. Artificially low interest rates result in under-pricing, and consequently, the excessive utilization of capital. |
(106) |
Overall credit growth in the PRC indicates a worsening efficiency of capital allocation without any signs of credit tightening that would be expected in an undistorted market environment. As a result, non-performing loans have increased rapidly in recent years. Faced with a situation of increasing debt-at-risk, the GOC has opted to avoid defaults. Consequently, bad debt issues have been handled by rolling over debt, thus creating so-called ‘zombie’ companies, or by transferring the ownership of the debt (e.g. via mergers or debt-to-equity swaps), without necessarily removing the overall debt problem or addressing its root causes. |
(107) |
In essence, despite the recent steps that have been taken to liberalize the market, the corporate credit system in the PRC is affected by significant distortions resulting from the continuing pervasive role of the state in the capital markets. |
(108) |
No evidence was submitted to the effect that the steel sector, including SRW and HRS production, would be exempted from the above-described government intervention in the financial system. The Commission has also established that the raw material HRS (64) benefited from preferential lending constituting subsidies. Therefore, the substantial government intervention in the financial system leads to the market conditions being severely affected at all levels. |
3.2.1.9.
(109) |
The Commission noted that the distortions described in the Report were characteristic for the Chinese economy. The evidence available shows that the facts and features of the Chinese system as described above in Sections 3.2.1.1-3.2.1.5 as well as in Part A of the Report apply throughout the country and across the sectors of the economy. The same holds true for the description of the factors of production as set out above in Sections 3.2.1.6-3.2.1.8 above and in Part B of the Report. |
(110) |
The Commission recalls that in order to produce SRW, a broad range of inputs is needed. According to evidence on the file, all the sampled exporting producers sourced all their inputs in the PRC. When the producers of SRW purchase/contract these inputs, the prices they pay (and which are recorded as their costs) are clearly exposed to the same systemic distortions mentioned before. For instance, suppliers of inputs employ labour that is subject to the distortions. They may borrow money that is subject to the distortions on the financial sector/capital allocation. In addition, they are subject to the planning system that applies across all levels of government and sectors. |
(111) |
As a consequence, not only the domestic sales prices of SRW are not appropriate for use within the meaning of Article 2(6a)(a) of the basic Regulation, but all the input costs (including raw materials, energy, land, financing, labour, etc.) are also tainted because their price formation is affected by substantial government intervention, as described in Parts A and B of the Report. Indeed, the government interventions described in relation to the allocation of capital, land, labour, energy and raw materials are present throughout the PRC. This means, for instance, that an input produced in the PRC by combining a range of factors of production is exposed to significant distortions. The same applies for the input to the input and so forth. No evidence or argument to the contrary has been adduced by the GOC or the exporting producers in the present investigation. |
3.2.1.10.
(112) |
The analysis set out in sections 3.2.1.2 to 3.2.1.9, which includes an examination of all the available evidence relating to the PRC’s intervention in its economy in general as well as in the steel sector and the automotive industry showed that prices or costs of the product concerned, including the costs of raw materials, energy and labour, are not the result of free market forces because they are affected by substantial government intervention within the meaning of Article 2(6a)(b) of the basic Regulation as shown by the actual or potential impact of one or more of the relevant elements listed therein. On that basis, and in the absence of any cooperation from the GOC, the Commission concluded that it is not appropriate to use domestic prices and costs to establish normal value in this case. |
(113) |
Consequently, the Commission proceeded to construct the normal value exclusively on the basis of costs of production and sale reflecting undistorted prices or benchmarks, that is, in this case, on the basis of corresponding costs of production and sale in an appropriate representative country, in accordance with Article 2(6a)(a) of the basic Regulation, as discussed in the following section. |
3.2.2. Representative country
3.2.2.1.
(114) |
The choice of the representative country was based on the following criteria:
|
(115) |
As explained in recitals (29) to (31) the Commission published two notes for the file on the sources for the determination of the normal value. |
3.2.2.2.
(116) |
In the Note of 6 March 2019, the Commission identified the following nine countries: Argentina, Brazil, Colombia, Malaysia, Mexico, Russia, South Africa, Thailand, and Turkey, which are regarded by the World Bank as countries with a similar level of economic development as the PRC, i.e. they are all classified as ‘upper-middle income’ countries on a gross national income (hereinafter ‘GNI’) basis. |
(117) |
In its submission of 11 March 2019, the complainant claimed that Mexico should not be selected as representative country as the Mexican producers supplied exclusively the NAFTA area. The complainant, however, did not provide any evidence as to how the destination of produced goods should be relevant for the selection of the representative country and what effect this would have on the representativeness of the relevant factors of production. Thus, this claim was rejected. |
(118) |
In the Note of 16 April 2019, the Commission noted that Argentina was classified as a high income country during the investigation period. The Commission, therefore, concluded that only eight of the originally identified upper-middle income countries could be considered for the selection of the representative country. |
(119) |
No further comments concerning the level of economic development were received following the Note of 16 April 2019. |
3.2.2.3.
(120) |
In the Note of 6 March 2019, the Commission indicated that production of the product concerned was known to take place in Argentina, Brazil, Colombia, Malaysia, Mexico, Russia, South Africa, Thailand, and Turkey. |
(121) |
The Commission also found that there were not publicly available financial data concerning the producer of SRW in Argentina. The complainant, in its submission of 11 March 2019, confirmed that the producer in Argentina was no longer in operation. For that reason as well as the reason explained in recital (118), the Commission did not consider Argentina as a possible representative country. |
(122) |
The Commission further noted that the financial data relevant for the investigation period had not been available for any producer in the considered countries when the Note of 6 March 2019 was published. |
(123) |
In its submission of 18 March 2019, an exporting producer claimed that India should be selected as a representative country. According to this company, there were at least two producers of the particular product type manufactured by this exporting producer. The company further claimed that gross national income (GNI), used by the World Bank to classify countries, is not an appropriate indicator to assess the level of economic development of a country since GNI per capita does not adequately summarise a country’s level of development or measure welfare. The company submitted that the GDP should be used instead. |
(124) |
In this respect, the Commission noted that the basic Regulation established that the representative country should have a similar level of development as the exporting country. It, however, did not contain any further requirement for the selection of the appropriate representative country. The Commission decided that the appropriate source for this information was the World Bank database. This database allowed the Commission to have a sufficient number of potentially appropriate representative countries with a similar level of development to choose the most suitable source of undistorted costs and prices. Furthermore, this is a ranking based on an objective criterion and used consistently in all cases where the determination of the normal value is based on the provisions of Article 2(6a) of the basic Regulation, which ensures uniformity and equal treatment throughout different proceedings. GNI is used by the World Bank in its classification of economies into income groupings as it follows the methodology of the operational lending policy of the World Bank. As it recognises all income that goes into a national economy, regardless of its origin, it adequately reflects the total economic activity within a country. |
(125) |
At the same time, the Commission noted that India was included in the list of ‘low and middle income’ countries in the World Bank’s ranking, and therefore was not at a similar level of development to China. As a result, India could not be considered an appropriate representative country for China. Consequently, the Commission rejected this claim. |
(126) |
In their comments on the Note of 6 March 2019, EUWA and an exporting producer made several claims concerning the existence of production of the product under investigation in some of the considered countries, the availability of financial data that could be sufficiently relevant for the countries considered in case of consolidated annual accounts of international groups, and the availability of financial data for the investigation period. |
(127) |
The Commission examined those claims and in the Note of 16 April concluded that Colombia, Malaysia, Mexico, Russia, and Thailand could not be further considered for the selection of a representative country because no financial data of the producers in Colombia, Malaysia, Russia and Thailand was available for the investigation period. In addition, the consolidated financial data available for the producer in Mexico concerned a group of companies based and active in various countries while the contribution of production and sales in Mexico to the financial results was not possible to identify. The Commission also preliminarily found that one of the Brazilian producers only produced aluminium wheels and thus, could not be considered for the calculation of SG&A and profit. |
(128) |
In the Note of 16 April 2019, the Commission noted that financial data for the investigation period were readily available for an international group operating in Brazil and Turkey (and other countries). The respective annual report contained information on the consolidated results of the group but also detailed information on the individual results of the parent company based in Brazil, which was also a producer of steel wheels, and less detailed information on the results of its two subsidiaries operating in Turkey. The information on the subsidiaries in Turkey was limited to net sales revenue, costs of sales, operating expenses, income tax, and profit. Thus, it did not allow assessing the relevance of costs included in the category operating expenses. |
(129) |
In the Note of 16 April 2019, the Commission also found that it could be reasonably expected that the producer in South Africa would publish its annual report for the investigation period in time to be used in the calculation. Although the producer in South Africa belonged to an international group, the Commission could potentially accept the consolidated financial data as relevant for the producer in South Africa as the share of the turnover generated in South Africa on the total turnover of the group was not negligible. |
(130) |
Notwithstanding the above, the data available for the Brazilian producer referred to in recital (128) was deemed the most complete data for the purposes of determining representative SG&A and profit. |
(131) |
In its comments on the Note of 16 April 2019, the complainant reiterated its preference for Turkey as a representative country; however, it did not oppose the Commission’s finding that Brazil could be used as representative country. |
(132) |
Consequently, the Commission concluded that Brazil was an appropriate representative country in terms of production of the product under investigation and the availability and quality of financial data for the investigation period as explained in recital (128). |
(133) |
Following the verification visits to the sampled exporting producers in the PRC, where the Commission determined a final list of raw materials and corresponding HS or tariff codes, it could be confirmed that Brazil provided the most complete set of data for the establishment of undistorted prices and benchmarks needed for the construction of the normal value. |
3.2.2.4.
(134) |
Having established that Brazil was the most appropriate representative country, there was no need to carry out an assessment of the level of social and environmental protection in accordance with the last sentence of Article 2(6a)(a) first indent of the basic Regulation. |
3.2.2.5.
(135) |
In view of the above analysis, Brazil met all the criteria laid down in Article 2(6a)(a), first indent of the basic Regulation in order to be considered as an appropriate representative country. In particular, Brazil has a substantial production of the product under investigation and a complete set of data available for the factors of production, SG&A and profit during the period of investigation. |
3.2.3. Sources used to establish undistorted costs
(136) |
In the Note of 6 March 2019, the Commission stated that, in order to construct the normal value in accordance with Article 2(6a)(a) of the basic Regulation, it would use Global Trade Atlas (‘GTA’) to establish the undistorted cost of most of the factors of production, the statistics of the International Labour Organisation (‘ILO’) and national statistics to establish the undistorted costs of labour, and other sources depending on the selected representative country to establish the undistorted costs of energy (such as electricity, natural gas, and water). |
(137) |
In its comments of 18 March 2019, an exporting producer submitted that Brazil should not be considered an appropriate representative country due to the export restrictions in Brazil concerning flat rolled products reported in the OECD Inventory on export restrictions on Industrial Raw Materials (67), which may potentially influence not only the domestic price but also the import price of those inputs. In this respect, the exporting producer noted in particular that hot rolled steel is the main raw material representing 40 % to 60 % of total production cost. |
(138) |
The Commission examined the existence of the export restrictions in Brazil and in the Note of 16 April 2019 confirmed that the exports of certain flat steel products were subject to export authorisation under Law No 9.112 of 10 October 1995 (68) concerning exports of sensitive goods and related services. At that stage, the Commission noted that the sampled exporting producers did not use in their production flat rolled products falling under the HS codes that were subject to export restrictions in Brazil. |
(139) |
After the verification visits, the Commission, however, found that flat rolled products falling under one of the HS codes subject to the export restriction mentioned in recital (138), namely HS sub-heading 7228 70 (‘angles, shapes and sections’), were indeed used by the only examined exporting producer in the manufacturing of the product concerned. |
(140) |
Therefore, the Commission decided to replace the distorted costs of that particular factor of production with an international benchmark instead of an import price in Brazil. This benchmark is explained below in recital (158). |
(141) |
In its submission of 18 March 2019, an exporting producer claimed that consumables should not be included among the factors of production for the purpose of applying Article 2(6a)(a) of the basic Regulation as Article 2(6a)(b) of the basic Regulation refers to raw materials and energy, and does not include consumable items. |
(142) |
In the Note of 16 April 2019, the Commission contended that consumables are included in the scope of Article 2(6a)(a) of the basic Regulation, as that provision covers the totality of the costs of production and sale necessary for the calculation of the normal value without any exclusion whatsoever. By contrast, Article 2(6a)(b) of the basic Regulation clarifies the concept of ‘significant distortions’ triggering the use of the provisions for the determination of normal value contained in Article 2(6a) of the basic Regulation, but it does mention reported prices and costs, (including, but not limited to, raw materials and energy) in this different context. The Commission, therefore, considered that all of the costs of production and sale, including the consumables and regardless of their share in the total cost of production must be reported by exporting producers and had to be taken into account for the calculation of the normal value. Hence, the Commission rejected this claim. |
(143) |
In the Note of 16 April 2019, based on the decision to use Brazil as the representative country, the Commission informed the interested parties that it would use GTA to establish undistorted costs of the factors of production, the ILO statistics and other publicly available sources (69) to establish undistorted labour costs, and the tariffs charged by selected Brazilian suppliers of electricity, natural gas and water to establish undistorted costs of those types of energy. |
(144) |
The Commission also informed the interested parties that, to establish the undistorted SG&A and profit, it would use the financial data of the IochpeMaxion group, in particular of the parent company based in Brazil, for which detailed data was available in the Individual and Consolidated Financial Statements for the Year Ended December 31, 2018 and Independent Auditor’s Report (70) of the group. |
(145) |
Following the Note of 16 April 2019, the Commission did not receive any further comments concerning the sources for undistorted costs and benchmarks. Therefore, the sources listed in recitals (143) and (144) were provisionally confirmed. |
3.2.4. Undistorted costs and benchmarks
3.2.4.1.
(146) |
As already stated in recital (29), in the Note of 6 March 2019, the Commission sought to establish an initial list of factors of production and sources intended to be used for all factors of production such as materials, energy and labour used in the production of the product concerned by the exporting producers. |
(147) |
The Commission did not receive any comments concerning the list of factors of production following the Note of 6 March 2019 or the Note of 16 April 2019. |
(148) |
In the Note of 16 April 2019, based on the information received from interested parties, the Commission established a list of 60 potential HS codes corresponding to the factors of production used in the manufacturing of the product concerned. |
(149) |
The Commission then established a definitive list of factors of production and corresponding HS codes after the verification visits at the premises of the sampled exporting producers. |
(150) |
Considering all the information submitted by the interested parties and collected during the verification visits, the following factors of production and HS codes, where applicable, have been identified: Table 1
|
(a) Raw materials and scrap
(151) |
During the verification visits, the Commission verified the raw materials used and the steel scrap generated in the manufacturing of the product concerned. |
(152) |
For all raw materials with the exception of section steel, absent any information on the market of the representative country, the Commission relied on import prices. An import price in the representative country was determined as a weighted average of unit prices of imports from all third countries excluding the PRC. The Commission decided to exclude imports from the PRC into the representative country as it concluded in recital (112) that it is not appropriate to use domestic prices and costs in the PRC due to the existence of significant distortions in accordance with Article 2(6a)(b) of the basic Regulation. Given that there is no evidence showing that the same distortions do not equally affect products intended for export, the Commission considered that the same distortions affected export prices. In fact, it appears that the import price of many of the raw materials exported by the PRC into Brazil are lower than other imports. After excluding the PRC, the imports from other third countries remained representative ranging from 40 % to 100 % of total volumes imported to Brazil. |
(153) |
The Commission established that the import volumes of argon to Brazil were negligible and therefore the benchmark could not be considered reliable. With regard to steel scrap, the Commission found that the import price in Brazil was considerably higher than the import price of hot-rolled flat steel products and thus was also considered not to be reliable. |
(154) |
Since the actual costs of argon incurred by the cooperating exporting producer represented a negligible share on total costs of raw material (less than 0,005 %) in the investigation period, having no impact in the dumping margin calculations no matter what source would be used to replace them, the Commission decided to include those costs into manufacturing overheads. |
(155) |
In order to determine the undistorted price of steel scrap, the Commission turned to Brazilian export statistics. For the calculation of the export price of steel scrap, the provisions of recital (152) apply accordingly. In addition, the Commission noted that there were no exports of steel scrap from Brazil to the PRC. |
(156) |
In order to establish the undistorted price of raw materials, delivered at the gate of the exporting producer’s factory as provided by Article 2(6a)(a), first indent of the basic Regulation, the Commission added international transport and insurance costs (71), applied the import duty of the representative country and added domestic transport costs to the import price. The international and domestic transport costs for all raw materials as well as insurance costs were estimated based on the verified data provided by the cooperating exporting producer. |
(157) |
Where the export price (72) was used to determine the undistorted price of a raw material, no further adjustments to the data from GTA were made. The Commission considered that the costs between a Brazilian supplier and an international port accounted for the costs between such supplier and its Brazilian customer. The price from GTA could, therefore, be accepted as price of a raw material as delivered at the gate of the exporting producer’s factory. |
(158) |
For reasons explained in recitals (137) to (140), the Commission used an international benchmark to determine the undistorted costs of section steel. The undistorted international benchmark used is the Latin-American ex-works price of structural sections and beams (73). This benchmark was considered undistorted because, being based on an arithmetic average of the transaction values identified in Brazil and Mexico, it was deemed to reflect competitive market conditions in the area. That benchmark showed prices ranging between 4,55 CNY/kg and 5,61 CNY/kg during the investigation period. |
(159) |
For some raw materials, the cooperating exporting producer was not able to determine the consumption volume in its records. The actual costs of those raw materials represented a negligible share on total actual costs of manufacturing of less than 0,5 %. Those costs were included in the manufacturing overheads as explained in recital (169). |
(b) Labour
(160) |
To establish the benchmark for labour costs, the Commission used the ILO statistics together with publicly available information on additional labour costs incurred by an employer in Brazil. |
(161) |
The ILO statistics (74) provided data on the mean weekly hours actually worked per employed person and monthly earnings of employees in manufacturing during the investigation period. Using that data, the Commission calculated an hourly salary in manufacturing, to which additional labour related costs (75) (social security and unemployment contributions born by the employer) were added. |
(c) Electricity
(162) |
The electricity price charged by one of the largest electricity suppliers in Brazil, the company EDP Brasil, was readily available (76). The information was detailed enough to identify the price of electricity and the price for the use of the distribution system (modalidade tarifaria azul) paid by industrial users. |
(163) |
It should be noted that in Brazil, the regulatory authority Agência Nacional de Energia Elétrica (77) (‘ANEEL’) obliges the electricity suppliers to increase their tariffs by a certain percentage to regulate the consumption of electricity in the country. ANEEL uses a flag system (78) (green, yellow, red 1, red 2) to signal whether the electricity price should remain as proposed by the supplier (green) or increased by 0,010 BRL/kWh (yellow), 0,030 BRL/kWh (red 1), or 0,050 BRL/kWh (red 2). The flags are published by ANEEL on a monthly basis and for the investigation period were readily available on the website of EDP Brasil (79). When determining the undistorted costs of electricity, the Commission took into account the flags applied during the investigation period and adjusted the price accordingly. |
(164) |
The undistorted costs of electricity in Table 1 are provided as a range since different tariffs apply to individual consumers depending on their consumption. |
(d) Natural gas and wood pellets
(165) |
The exporting producers used natural gas or wood pellets to produce heat. The average price of natural gas for industrial users in Brazil during the investigation period was readily available in a monthly publication of the Ministry of Mining and Energy (80). The undistorted costs of wood pellets were established on the basis of the import price in Brazil as explained in recital (152). |
(166) |
The undistorted costs of natural gas in Table 1 are provided as a range since different tariffs apply to individual consumers depending on their consumption. |
(e) Water
(167) |
The water tariff was readily available as charged by the company Sabesp that is responsible for water supply, sewage collection and treatment in the State of Sao Paulo. The information gave detailed data on tariffs (81) applicable for industrial users in 2018 for various sub-regions and municipalities of the State of Sao Paulo (82). The Commission based its determination of undistorted costs for water and sewage collection on the tariff applicable to the industrial customers in the Metropolitan area during the investigation period. |
(168) |
The undistorted costs of water in Table 1 are provided as a range since different tariffs apply to individual consumers depending on their consumption. |
3.2.4.2.
(169) |
The manufacturing overheads incurred by the cooperating exporting producer were increased by the costs of raw materials for which the consumption volume could not be identified in the records of the exporting producer, and the costs of argon as explained in recitals (153) and (154), and subsequently expressed as a share of the costs of manufacturing actually incurred by the exporting producer. This percentage was applied to the undistorted costs of manufacturing. |
(170) |
For SG&A and profit, the Commission used the financial data of the Brazil-based parent company of the Iochpe Maxion group, as the parent company is located in Brazil and is a producer of the product concerned, (83) as announced in the Note of 16 April 2019. |
(171) |
In the calculation of SG&A, the Commission disregarded the item ‘share of profit (loss) of subsidiaries’ since such cost (or income) was not related to the product concerned and was specific for the international structure of the group. In 2018, the parent company received a share on the profit of subsidiaries. The adjustment resulted in a higher percentage of SG&A but a lower percentage of profit. In total, it had no influence on the level of SG&A and profit taken together. |
3.2.4.3.
(172) |
In order to establish the constructed normal value, the Commission took the following steps. |
(173) |
Firstly, the Commission established the undistorted costs of manufacturing. It applied the undistorted unit costs to the actual consumption of the individual factors of production of the cooperating exporting producer. |
(174) |
Secondly, the Commission increased the undistorted costs of manufacturing by adding the manufacturing overheads determined as described in recital (169), to arrive at the undistorted costs of production. |
(175) |
Finally, to the costs of production established as described in recital (174), the Commission applied SG&A and profit of the parent company of the Iochpe Maxion group explained in recitals (170) to (171). |
(176) |
The SG&A expressed as a percentage of the Costs of Goods Sold (‘COGS’) and applied to the undistorted costs of production amounted to 11,21 %. |
(177) |
The profit expressed as a percentage of the COGS and applied to the undistorted costs of production amounted to 5,06 %. |
(178) |
On that basis, the Commission constructed the normal value per product type on an ex-works basis in accordance with Article 2(6a)(a) of the basic Regulation. Since only one exporting producer was left in the sample, the Commission constructed the normal value per product type for this exporting producer only. |
3.3. Export price
(179) |
The exporting producer in question exported to the Union directly to independent customers. Thus, the export price was the price actually paid or payable for the product concerned when sold for export to the Union, in accordance with Article 2(8) of the basic Regulation. |
3.4. Comparison
(180) |
The Commission compared the normal value and the export price of the cooperating exporting producer on an ex-works basis. |
(181) |
Where justified by the need to ensure a fair comparison, the Commission adjusted the export price for differences affecting prices and price comparability, in accordance with Article 2(10) of the basic Regulation. Adjustments, based upon the actual figures of the cooperating company, were made for handling and inland freight expenses, packing costs, credit cost and bank charges. |
3.4.1. Dumping margin
(182) |
For the sampled cooperating exporting producer, the Commission compared the weighted average normal value of each type of the like product with the weighted average export price of the corresponding type of the product concerned, in accordance with Article 2(11) and 2(12) of the basic Regulation. |
(183) |
On this basis, the provisional weighted average dumping margin expressed as a percentage of the CIF Union frontier price, duty unpaid, is as follows:
|
(184) |
As explained in recital (18), as a result of the non-cooperation of two sampled exporting producers and the exclusion of another exporting producer because of the reduction in the product scope, the sample was reduced to only one company, namely the Xingmin Group. It was therefore not possible to establish a weighted average margin of dumping for the non-sampled cooperating exporting producers according to Article 9(6) of the basic Regulation. Taking into account the degree of non-cooperation in the sample and the insufficient time to select a new sample at this late stage of the procedure, the Commission decided to apply best facts available with regard to the sample, pursuant to Article 17(4) and Article 18 of the basic Regulation. |
(185) |
On this basis, for the non-sampled cooperating exporting producers, the Commission exceptionally decided to set the dumping margin at the same level as the only remaining sampled exporting producer. This is because it considered that the failure of the sample was also caused by the exclusion of certain product types which, with the consequent exclusion of one of the two cooperating exporting producers left in the sample, had a direct impact on the sample. The Commission also took into account that the remaining company in the sample accounted for around 20 % of imports of the product concerned and exported a wide range of product types to the Union. |
(186) |
For all other exporting producers, the Commission decided to base the residual dumping margin on the level corresponding to the weighted average dumping margin found in the sampled company for the eight product types with the highest individual dumping margins. The volume of exports of these product types represented around 29 % of the total volume exported to the Union by the company in question, which is considered sufficiently representative. |
(187) |
The provisional dumping margins, expressed as a percentage of the CIF Union frontier price, duty unpaid, are as follows:
|
4. INJURY
4.1. Definition of the Union industry and Union production
(188) |
The like product was manufactured by 11 producers in the Union during the investigation period. They constitute the ‘Union industry’ within the meaning of Article 4(1) of the basic Regulation. |
(189) |
The total Union production during the investigation period was established at around 35 million steel road wheels. The Commission established the figure on the basis of the verified questionnaire reply of EUWA, cross-checked and, where appropriate, updated with the verified questionnaire replies of the sampled Union producers. As indicated in recital (8), the sample was made up of three Union producers representing more than 35 % of the total Union production of the like product. |
4.2. Union market and consumption
(190) |
The market for steel wheels covers a variety of product types depending mainly on the type of vehicles on which they are fitted. These product types mainly vary in size, with smaller sizes destined for passenger cars and larger diameter sizes destined for heavy trucks and special purpose motor vehicles. These product types are commonly classified by the industry in two categories: passenger car wheels (for vehicles with not more than 8 seats) and commercial wheels (all others). All these various types share the same basic physical characteristics and uses, and therefore are considered one single product for the purpose of this investigation. |
(191) |
The investigation established that both China and the Union producers are active in both the passenger car wheels and the commercial wheels. Based on the information provided by the complainant, around 45 % of the Chinese imports during the IP were passenger car wheels, and 55 % commercial wheels. In the Union, around 65 % of the sales are for passenger car wheels, and 35 % commercial wheels. |
(192) |
Steel wheels are sold in the Union via two main distribution channels: either directly to car manufacturers (OEMs), or to independent companies who develop and brand SRW which are subsequently sold to wholesalers or retailers. Even though car manufactures demand rather strict specifications, all wheels have the same/comparable characteristics independently of their distribution channel, and ultimately all SRW types constitute one single homogeneous type. Most importantly, there are clear interconnections between the two distribution channels as prices on one distribution channel can exercise pressure on the other. |
(193) |
The Commission established the Union consumption on the basis of the sales volumes of the Union industry on the Union market plus imports from all third countries. |
(194) |
Union consumption developed as follows: Table 2 Union consumption
|
(195) |
During the period considered the Union consumption increased by 2 %. |
4.3. Imports from the country concerned
(196) |
CN codes ex 8708 70 10, ex 8708 70 99 and ex 8716 90 90 include a broader range of products than SRW. Moreover, the only available unit of measurement in Eurostat is weight, which may not necessarily allow for an adequate comparability of data between the various sources of imports given the different types of SRW with a wide range in diameters having different weight, and the potentially different and/or changing product mix (passenger car wheels and commercial vehicle wheels including amongst others tractor wheels and trailer wheels). EUWA raised this issue in its complaint and provided, in addition to the figures in the complaint, its own estimations of the import volumes from China, Turkey and other countries, which was verified by the Commission. On this basis, the Commission informed interested parties and allowed them to comment on the various sources of data, including the estimations of import volumes provided during the course of the investigation by EUWA, as well as import volume and prices based on Eurostat data. No party opposed these estimations of the import volumes, which were therefore considered to be the best source of information available. Even though EUWA expressed doubts as to the level of prices given by Eurostat, in absence of other available source of information, the Commission relied on Eurostat data in order to at the very least establish price trends. The Commission, however, used prices received from the sampled parties in order to compare price levels for the purpose of establishing the price undercutting and injury margin. |
4.3.1. Volume and market share of the imports from the PRC
(197) |
The market share of the imports was established by comparing the volume of imports with the Union consumption. |
(198) |
Imports into the Union from the PRC developed as follows: Table 3 Import volume and market share
|
(199) |
The imports from the PRC and its market share doubled over the period considered. Imports increased from around 1 million to 2 million pieces, corresponding to an increase of market share from 2,6 % to 5,3 % in the investigation period. Imports from the PRC amounted to around 25 % of total imports during the IP. It should be noted that, based on the available data, Chinese imports concerned both passenger car and commercial wheels and that they increased for both types, but the increase was much more marked in the passenger car types of wheels. |
4.3.2. Prices of the imports from the PRC and price undercutting
(200) |
As explained above in recital (196), the Commission established the trends of imports prices on the basis of Eurostat data as disclosed to the parties by the Commission during the course of the investigation. It is recalled that even though Eurostat data did not offer a precise picture concerning the absolute level of imports – and therefore of unit prices – it was however the only available source of information to at the very least establish price trends. The data below was therefore considered in that context, and thus was not used to compare price levels. |
(201) |
The price of imports into the Union from the PRC developed as follows: Table 4 Import prices (EUR/kilo)
|
(202) |
Import prices from the PRC fell on average by 7 % over the period considered. |
(203) |
The Commission also determined the price undercutting during the investigation period by comparing:
|
(204) |
The price comparison was made on a product type-by-type basis for transactions at the same level of trade, duly adjusted where necessary, and after deduction of rebates and discounts. The result of the comparison was expressed as a percentage of the sampled Union producers’ turnover during the investigation period. It showed significant undercutting ranging from 8,7 % to 42,6 % resulting in a weighted average margin of 26,2 % for the co-operating exporter. |
4.4. Economic situation of the Union industry
4.4.1. General remarks
(205) |
In accordance with Article 3(5) of the basic Regulation, the examination of the impact of the dumped imports on the Union industry included an evaluation of all economic indicators having a bearing on the state of the Union industry during the period considered. |
(206) |
As mentioned in recital (8), sampling was used for the determination of possible injury suffered by the Union industry. |
(207) |
For the injury determination, the Commission distinguished between macroeconomic and microeconomic injury indicators. The Commission evaluated the macroeconomic indicators on the basis of data contained in the verified questionnaire reply of EUWA. These data related to all Union producers, but were updated where necessary following the verifications at the sampled Union producers. The Commission evaluated the microeconomic indicators on the basis of data contained in the verified questionnaire replies from the sampled Union producers. Both sets of data were found to be representative of the economic situation of the Union industry. |
(208) |
The macroeconomic indicators are: production, production capacity, capacity utilisation, sales volume, market share, growth, employment, productivity and magnitude of the dumping margins. |
(209) |
The microeconomic indicators are: average unit prices, unit cost, average labour costs, profitability, cash flow, investments and return on investments, and ability to raise capital. |
4.4.2. Macroeconomic indicators
4.4.2.1.
(210) |
The total Union production, production capacity and capacity utilisation developed over the period considered as follows: Table 5 Production, production capacity and capacity utilisation
|
(211) |
The total Union industry’s production fluctuated but decreased by 4 % over the period considered. As the production capacity was kept almost at the same level throughout the period considered, capacity utilisation went down from 69,9 % to 66,9 %. |
4.4.2.2.
(212) |
The Union industry’s sales volume and market share developed over the period considered as follows: Table 6 Sales volume and market share
|
(213) |
The sales volume of the Union industry decreased by 4 % over the period considered, while the imports from China doubled. Consequently the market share of the Union industry decreased by 6 % (from 84,9 % to 79,8 %) over the period considered. |
4.4.2.3.
(214) |
The above figures in respect of production, sales, volume and market share demonstrate that the Union industry was not able to grow, either in absolute terms or in relation to consumption, over the period considered. |
4.4.2.4.
(215) |
Employment and productivity developed over the period considered as follows: Table 7 Employment and productivity
|
(216) |
During the period considered, employment in the Union remained stable. Indeed, the growth in consumption could not be matched with a similar growth in employment as sales and production volumes decreased. As production fell by 4 %, productivity of the Union industry fell by 5 % over the period considered. |
4.4.2.5.
(217) |
All dumping margins were significantly above the de minimis level. The impact of the magnitude of the actual margins of dumping on the Union industry was substantial, given the volume and prices of imports from the PRC. |
(218) |
This is the first anti-dumping investigation regarding the product concerned. Therefore, no data were available to assess the effects of possible past dumping. |
4.4.3. Microeconomic indicators
4.4.3.1.
(219) |
The weighted average unit sales prices of the sampled Union producers to customers in the Union developed over the period considered as follows: Table 8 Average sales prices in the Union (EUR)
|
(220) |
Whereas the Union industry’s cost of production increased by 28 % over the period considered, mainly due to a strong increase in the cost of hot-rolled flat steel products, a key raw material, the Union industry’s average unit sales price to unrelated customers in the Union increased by only 21 % during the IP. This demonstrates the severe price suppression caused by the strongly increasing imports of the product concerned. As will be explained below in section 4.4.3.4, this had a significant impact on the financial situation of the Union industry which became loss making during the investigation period. |
4.4.3.2.
(221) |
The average labour costs of the sampled Union producers developed over the period considered as follows: Table 9 Average labour costs per employee (EUR)
|
(222) |
Between 2015 and the investigation period, the average labour costs per employee of the sampled Union producers increased slightly by 3 %. The labour cost increased especially in 2017 due to a legal change in the Member State of one of the sampled producers. |
4.4.3.3.
(223) |
Stock levels of the Union producers developed over the period considered as follows: Table 10 Inventories
|
(224) |
Inventories cannot be considered as a relevant injury indicator as production of steel road wheels takes place to a large extent to order; stock at a determined point in time is mostly the result of goods sold but not yet delivered. Therefore, the trends on inventories are given for information only. |
(225) |
Overall closing stocks decreased by 30 % over the period considered. Closing stocks as a percentage of production decreased slightly from 6,4 % in 2015 to 4,7 % during the investigation period, i.e. by 27 %. |
4.4.3.4.
(226) |
Profitability, cash flow, investments and return on investments of the sampled Union producers developed over the period considered as follows: Table 11 Profitability, cash flow, investments and return on investments
|
(227) |
The Commission established the profitability of the sampled Union producers by expressing the pre-tax net profit of the sales of the like product to unrelated customers in the Union as a percentage of the turnover of those sales. Profitability was erratic over the period concerned, but in general followed in decreasing trend as from 2016 and became negative during the investigation period. |
(228) |
The net cash flow is the ability of the Union producers to self-finance their activities. The trend in net cash flow developed negatively over the period considered, even though the deterioration, in particular at the end of the IP, was less marked than the trend in profitability |
(229) |
The investments increased by 87 % over the period considered. Almost half of the investment concerned production line maintenance. However, there were also significant investments in new capacity in line with a projected increase in demand in the coming years for larger size diameter wheels, requiring additional machining and painting capacity. |
(230) |
The return on investments is the profit expressed as a percentage of the net book value of investments. It developed negatively over the period considered despite an increase in total investments in 2016, reflecting the trends previously described for profitability and cash flow. |
4.4.4. Conclusion on injury
(231) |
Over the period considered, the sales prices increased by 21 %, which was not sufficient to cover the increase of the costs of production (28 %) during the investigation period. The Union industry’s profit level of 2,3 % in 2015 turned into losses (–1,1 %) during the investigation period. This trend resulted in similar falls in cash flow (– 22 %) and return on investment (– 134 %). |
(232) |
Over the period considered the Union industry level of production fell by 4 %, sales volume fell also by 4 %, and market share went from 84,9 % to 79,8 %, while the consumption increased by 2 %. It should be noted that during the same period China managed to double its market share. These developments left the Union industry in a vulnerable situation. |
(233) |
Very few of the indicators examined showed a positive development over the period considered. Investments increased by 87 %, but these investments concern mainly replacements and upgrades of machinery. Also, stocks have fallen throughout the period considered, but since most of the product is made upon demand, the decrease in stocks cannot be considered as a positive development in this case. |
(234) |
On the basis of the above, the Commission concluded at this stage that the Union industry suffered material injury within the meaning of Article 3(5) of the basic Regulation. |
5. CAUSATION
(235) |
In accordance with Article 3(6) of the basic Regulation, the Commission examined whether the dumped imports from the PRC caused material injury to the Union industry. In accordance with Article 3(7) of the basic Regulation, the Commission also examined whether other known factors could at the same time have injured the Union industry. The Commission ensured that any possible injury caused by factors other than the dumped imports from the PRC was not attributed to the dumped imports. These factors are imports from third countries, the export performance of the Union industry and the development of raw material costs. |
5.1. Effects of the dumped imports
(236) |
Imports from the PRC increased by 108 % over the period considered, and they also doubled their market share. The market share increase of dumped imports from the PRC accounted for the major part of the market share decrease of the Union industry. Furthermore, the prices of imports from the PRC fell on average by 7 % and, on the basis of best information available, they undercut Union industry prices, during the investigation period, by 26,2 % on average. The low prices of imports from the PRC also exercised significant price suppression during the investigation period, leading the Union industry to make losses since they were not able to increase their prices above their costs of production. |
(237) |
The analysis of the injury indicators in recitals (186) to (211) shows that the economic situation of the Union industry has worsened and this coincides with an increase of dumped imports from the PRC, at prices that undercut Union industry prices. The Union industry lost market shares to cheaper, and dumped, Chinese imports, and some sampled Union producers also confirmed the fact that – as already established in the context of the aluminium wheels investigation (85) – car makers still use Chinese offers as a benchmark to pressure down prices. This has exercised a significant pressure on Union prices, which were not able to pass on the cost increases. Indeed, it is the increase of imports and the substantially low prices found that are the key factors to be considered in this case. The price pressure exerted by the dumped imports from the PRC caused price suppression for the Union industry. In particular in 2017 and during the investigation period, when unit costs of production were increasing due to higher steel prices, the Union industry could not fully pass on these cost increases to its sales prices. This caused the Union industry’s performance indicators to deteriorate, resulting in losses during the investigation period. |
(238) |
On that basis it is concluded that the dumped imports from the PRC caused material injury to the Union industry. |
5.2. Effects of other factors
5.2.1. Imports from third countries
(239) |
The volume of imports from other third countries developed over the period considered as follows: Table 12 Imports from third countries
|
(240) |
Even if imports from Turkey increased during the IP, their development was much less marked than the Chinese imports. |
(241) |
In terms of volume, Turkish imports gained 360 thousand units during the IP while China doubled its Union imports which increased by one million units during the same period. As a result, the Chinese market shares increased by 2,7 percentage points (2,6 % to 5,3 %), while the Turkish increase remained more modest (+ 0,7 percentage points). In terms of prices, as mentioned above, Eurostat data does not allow a precise basis for a price comparison. In its complaint, EUWA however provided data showing that — based on 6 representative wheel types — Turkish prices were substantially higher than Chinese prices, i.e. on average around 25 % higher which is comparable to the undercutting margin established in recital (204). Given this, based on the evidence available, the Turkish imports cannot be considered to be made at injurious prices. |
(242) |
The imports from the other countries taken together increased by 48 % over the period concerned, their market share went up from 3,6 % to 5,2 %. Despite this and based on the only available information, prices from other third countries were around 50 % higher than the Chinese dumped prices. |
(243) |
Therefore, it was provisionally concluded that imports from third countries other than the PRC do not attenuate the causal link between the dumped imports and the injury suffered by the Union industry. |
5.2.2. Export performance of the Union industry
(244) |
The volume of exports by the Union producers developed over the period considered as follows: Table 13 Export performance of the Union producers
|
(245) |
Over the period considered, the share of exports of the Union industry represented less than 3 % of its total production. Therefore, even if the exports increased by 40 %, i.e. about 300 thousand units, it only represents a small portion of the decrease in production. The Union remained the main market of the Union industry representing 95,8 % of its sales during the investigation period, and these sales decreased both in absolute terms and in terms of market share during the period considered. |
(246) |
It is therefore concluded that, if anything, these export sales have slightly alleviated the injury caused by the dumped imports. |
(247) |
It was therefore provisionally concluded that the exports of the Union industry did not contribute to the injury suffered by the Union industry. |
5.2.3. The price of the steel
(248) |
In the complaint it was mentioned that, over the period considered, the price of steel in the Union had increased significantly and this was confirmed during the on spot verifications at the sampled Union producers. Indeed, the average purchase price of hot rolled coils by the sampled producers developed as follows: Table 14 Average cost of hot rolled coils to produce one wheel
|
(249) |
The average cost of hot rolled coils required to produce one wheel increased by 33 % over the period considered. Hot rolled coils represent roughly 50 % of the cost of production. Under normal circumstances, the industry would pass on such cost increases to its customers, in particular if its profitability is low. Under the current circumstances, with high and increasing volumes of abnormally low prized Chinese imports, the Union industry was not in a position to adjust its sales prices accordingly. |
(250) |
It was therefore provisionally concluded that the increase of the cost of the raw material was not a cause of injury, but rather the fact that, as established above, (see recital (249)), the Union industry could not reflect this increase in its prices because of Chinese dumped imports, which led to the fall in profitability. |
5.3. Conclusion on causation
(251) |
Over the period considered, import volumes from the PRC and its market shares increased significantly whereas prices from the PRC fell on average by 9 %. More importantly, the PRC dumped imports significantly undercut Union prices for this price sensitive product. Moreover, the price pressure from dumped imports from the PRC undermined the Union industry’s sales volumes and sales prices throughout the period considered but was particularly damaging in 2017 and the investigation period when costs were increasing. Such pressure caused severe production, sales and profitability losses in the investigation period. |
(252) |
On the basis of analysis in recitals (236) to (250), the Commission concluded at this stage that none of the other factors, considered individually or collectively, attenuate the causal link between the material injury to the Union industry caused by the dumped imports from the PRC. |
6. UNION INTEREST
(253) |
In accordance with Article 21 of the basic Regulation, the Commission examined whether it could clearly conclude that it was not in the Union interest to adopt measures in this case, despite the determination of injurious dumping. The determination of the Union interest was based on an appreciation of all the various interests involved, including those of the Union industry, importers, users and other relevant economic operators. |
6.1. Interest of the Union industry
(254) |
The investigation showed that the Union industry is suffering material injury because of the effects of dumped imports which undercut its prices, exercised price suppression and caused a significant loss of market share and led to losses in the investigation period, as elaborated in Sections 4 and 5 above. |
(255) |
It is expected that the Union industry will benefit from measures, which would likely prevent a further surge of imports from China at very low prices. Should measures not be imposed, such imports are expected to continue and even increase, causing further injury to the EU industry. |
6.2. Interest of unrelated importers and users
(256) |
Upon initiation, 72 importers, users and their associations were contacted. |
(257) |
Only two importers replied by providing a sampling reply. However, eventually both declined to further co-operate with the investigation and the Commission therefore could not obtain cooperation from importers. |
(258) |
The Commission sent questionnaires to the two groups of car manufacturers that came forward after initiation, but none made submissions or returned a questionnaire reply. |
(259) |
The investigation found that the impact of measures on steel road wheels is limited for car producers. This conclusion stems from the estimate made by a sampled Union producer according to which a full set of steel road wheels represents about 0,6 % of the cost of producing a small passenger car or 0,7 % of the cost of producing a truck (86). There is no other information on file showing that measures would have a significant negative impact on the users outweighing the positive impact of the measures on the Union industry. The same conclusion was reached in the latest investigation on a similar product (87). |
6.3. Conclusion on Union interest
(260) |
On the basis of the above, the Commission concluded that there were no compelling reasons that it was not in the Union interest to impose measures on imports of steel road wheels originating in People’s Republic of China at this stage of the investigation. |
7. PROVISIONAL ANTI-DUMPING MEASURES
(261) |
On the basis of the conclusions reached by the Commission on dumping, injury, causation and Union interest, provisional measures should be imposed to prevent further injury being caused to the Union industry by the dumped imports. |
7.1. Injury elimination level (Injury margin)
(262) |
To determine the level of the measures, the Commission first established the amount of duty necessary to eliminate the injury suffered by the Union industry. |
(263) |
In this case, the injury would be eliminated if the Union industry was able to cover its costs of production, including those costs resulting from Multilateral Environmental Agreements, and protocols thereunder, to which the Union is a party, and of ILO Conventions listed in Annex Ia of the basic Regulation, and to obtain a reasonable profit (‘target profit’). |
(264) |
Article 7(2c) of the basic Regulation sets the minimum target profit at 6 %. In accordance with that Article, for establishing the target profit, the Commission took into account the following factors: the level of profitability before the increase of imports from the PRC, the level of profitability needed to cover full costs and investments, costs for research and development (R&D) and innovation, and the level of profitability to be expected under normal conditions of competition. |
(265) |
As shown in Table 3, imports from the PRC increased consistently throughout the period considered. None of these years would therefore qualify for providing a target profit in line with Article 7(2c) of the basic Regulation. None of the sampled producers made a substantiated claim for investments foregone or R&D and innovation costs. In view of the above facts, the Commission resorted to the use of the minimum 6 % target profit which was added to the Union industry’s actual cost of production to establish the non-injurious price. |
(266) |
As no claims were made pursuant to Article 7(2d) concerning current or future costs which result from multilateral environmental agreements and protocols thereunder or from the listed ILO Conventions, no further costs were added to the non-injurious price thus established. |
(267) |
The Commission then determined the injury elimination level on the basis of a comparison of the weighted average import price of the sampled cooperating exporting producer in the PRC with the weighted average non-injurious price of the like product sold by the sampled Union producers on the Union market during the investigation period. Any difference resulting from this comparison was expressed as a percentage of the weighted average import CIF value. The resulting underselling margin was 50,3 %. |
(268) |
The injury elimination level for ‘other cooperating companies’ listed in annex 1 was the average of the sample, i.e. 50,3 %. |
(269) |
The injury elimination level for ‘all other companies’ is defined, in line with the methodology used for setting the residual dumping margin as explained under recital (185), by calculating the weighted average underselling margin found in the sampled company for the eight product types with the highest individual underselling margins. These product types represented 15 % of the imports from the cooperating Chinese exporter. The resulting residual underselling margin was 66,4 %. |
7.2. Provisional measures
(270) |
On the basis of the conclusions reached by the Commission on dumping, injury, causation and Union interest, provisional measures should be imposed to prevent further injury being caused to the Union industry by the dumped imports. |
(271) |
Provisional anti-dumping measures should be imposed on imports of steel road wheels originating in the PRC, in accordance with the lesser duty rule in Article 7(2) of the basic Regulation. The Commission compared the injury margins and the dumping margins, also taking into account the circumstances described in recitals (18) and (184). The amount of the duties should be set at the level of the lower of the dumping and the injury margins. |
(272) |
On the basis of the above, the provisional anti-dumping duty rates, expressed on the CIF Union border price, customs duty unpaid, should be as follows:
|
(273) |
The individual company anti-dumping duty rates specified in this Regulation were established on the basis of the findings of this investigation. Therefore, they reflected the situation found during this investigation with respect to these companies. These duty rates are exclusively applicable to imports of the product concerned originating in the PRC and produced by the named legal entities. Imports of product concerned produced by any other company not specifically mentioned in the operative part of this Regulation, including entities related to those specifically mentioned, should be subject to the duty rate applicable to ‘all other companies’. They should not be subject to any of the individual anti-dumping duty rates. |
(274) |
A company may request the application of these individual anti-dumping duty rates if it changes subsequently the name of its entity. The request must be addressed to the Commission (88). The request must contain all the relevant information enabling to demonstrate that the change does not affect the right of the company to benefit from the duty rate which applies to it. If the change of name of the company does not affect its right to benefit from the duty rate which applies to it, a notice informing about the change of name will be published in the Official Journal of the European Union. |
(275) |
To minimise the risks of circumvention due to the high difference in duty rates, special measures are needed to ensure the application of the individual anti-dumping duties. The companies with individual anti-dumping duties must present a valid commercial invoice to the customs authorities of the Member States. The invoice must conform to the requirements set out in Article 1(3) hereof. Imports not accompanied by that invoice should be subject to the anti-dumping duty applicable to ‘all other companies’. |
(276) |
To ensure a proper enforcement of the anti-dumping duties, the anti-dumping duty for all other companies should apply not only to the non-cooperating exporting producers in this investigation, but to the producers which did not have exports to the Union during the investigation period. |
(277) |
Statistics of SRW are frequently expressed in number of pieces. However, there is no such supplementary unit for SRW specified in the Combined Nomenclature laid down in Annex I to Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (89). It is therefore necessary to provide that not only the weight in kg or tonnes but also the number of pieces for the imports of the product concerned must be entered in the declaration for release for free circulation. Pieces should be indicated for TARIC codes 8708701080, 8708701085, 8708709920, 8708709980, 8716909095, and 8716909097. |
8. INFORMATION AT PROVISIONAL STAGE
(278) |
In accordance with Article 19a of the basic Regulation, the Commission informed interested parties about the planned imposition of provisional duties. This information was also made available to the general public via DG TRADE’s website. Interested parties were given three working days to provide comments on the accuracy of the calculations specifically disclosed to them. |
(279) |
No comments were received on the accuracy of the calculations. |
9. FINAL PROVISIONS
(280) |
In the interests of sound administration, the Commission will invite the interested parties to submit written comments within 15 days and/or to request a hearing with the Commission and/or the Hearing Officer in trade proceedings within 5 days. |
(281) |
The findings concerning the imposition of provisional duties are provisional and may be amended at the definitive stage of the investigation, |
HAS ADOPTED THIS REGULATION:
Article 1
1. A provisional anti-dumping duty is imposed on imports of road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, designed for:
(1) |
Road tractors; |
(2) |
Motor vehicles for the transport of persons and/or the transport of goods; |
(3) |
Special purpose motor vehicles (for example, fire fighting vehicles, spraying lorries); |
(4) |
Trailers or semi-trailers, not mechanically propelled, of road tractors |
originating in the People’s Republic of China, currently falling within CN codes ex 8708 70 10, ex 8708 70 99, ex 8716 90 90 (TARIC codes 8708701080, 8708701085, 8708709920, 8708709980, 8716909095, and 8716909097) (‘the product concerned’).
The following products are excluded:
(1) |
Road wheels of steel for the industrial assembly of pedestrian-controlled tractors currently falling under subheading 8701 10; |
(2) |
Wheels for road quad bikes; |
(3) |
Wheel centres in star form, cast in one piece, of steel; |
(4) |
Wheels for motor vehicles, specifically designed for uses other than on public roads (for example, wheels for agricultural tractors or forestry tractors, for forklifts, for pushback tractors, for dumpers designed for off-highway use); |
(5) |
Wheels for passenger car trailers, caravans, agricultural trailers and other trailed agricultural equipment used in fields, with a rim diameter of maximum 16 inches. |
2. The rates of the provisional anti-dumping duty applicable to the net, free-at-Union-frontier price, before duty, of the product described in paragraph 1 and produced by the companies listed below shall be as follows:
Company |
Provisional anti-dumping duty (%) |
TARIC additional code |
Xingmin Intelligent Transportation Systems Co., Ltd |
50,3 |
C508 |
Tangshan Xingmin Wheels Co., Ltd. |
50,3 |
C509 |
Xianning Xingmin Wheels Co., Ltd. |
50,3 |
C510 |
Other cooperating companies listed in Annex I |
50,3 |
See Annex I |
All other companies |
66,4 |
C999 |
3. The application of the individual duty rates specified for the companies mentioned in paragraph 2 shall be conditional upon presentation to the Member States’ customs authorities of a valid commercial invoice, on which shall appear a declaration dated and signed by an official of the entity issuing such invoice, identified by his/her name and function, drafted as follows: ‘I, the undersigned, certify that the (volume) of (product concerned) sold for export to the European Union covered by this invoice was manufactured by (company name and address) (TARIC additional code) in the [PRC]. I declare that the information provided in this invoice is complete and correct.’ If no such invoice is presented, the duty applicable to all other companies shall apply.
4. The release for free circulation in the Union of the product referred to in paragraph 1 shall be subject to the provision of a security deposit equivalent to the amount of the provisional duty.
5. Where a declaration for release for free circulation is presented in respect of the product referred to in paragraph 1, the number of pieces of the products imported shall be entered in the relevant field of that declaration.
6. Unless otherwise specified, the relevant provisions in force concerning customs duties shall apply.
Article 2
1. Interested parties shall submit their written comments on this regulation to the Commission within 15 calendar days of the date of entry into force of this Regulation.
2. Interested parties wishing to request a hearing with the Commission shall do so within 5 calendar days of the date of entry into force of this Regulation.
3. Interested parties wishing to request a hearing with the Hearing Officer in trade proceedings shall do so within 5 calendar days of the date of entry into force of this Regulation. The Hearing Officer shall examine requests submitted outside this time limit and may decide whether to accept to such requests if appropriate.
Article 3
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.
Article 1 shall apply for a period of six months.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 9 October 2019.
For the Commission
The President
Jean-Claude JUNCKER
(1) OJ L 176, 30.6.2016, p. 21.
(2) Notice of initiation of an anti-dumping proceeding concerning imports of steel road wheels originating in the People’s Republic of China (OJ C 60, 15.2.2019. p. 19).
(3) Notice amending the notice of initiation of an anti-dumping proceeding concerning imports of steel road wheels originating in the People’s Republic of China (OJ C 111, 25.3.2019, p. 52).
(4) See section 3.1 of the Regulation.
(5) Available at http://trade.ec.europa.eu/tdi/case_details.cfm?id=2383 (last viewed 15 July 2019).
(6) No t19.001009.
(7) No t19.001778.
(8) Commission Staff Working Document on Significant Distortions in the Economy of the People’s Republic of China for the purposes of Trade Defence Investigations, 20 December 2017, SWD(2017) 483 final/2 (hereafter ‘Report’).
(9) See p. 15 and Annex 14 of the complaint.
(10) Overcapacity in China – an impediment to the Party’s reform agenda, European Union Chamber of Commerce in China, p. 19 (Annex 14 of the complaint).
(11) Commission Implementing Regulation (EU) 2017/969 of 8 June 2017 imposing definitive countervailing duties on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the People’s Republic of China and amending Commission Implementing Regulation (EU) 2017/649 imposing a definitive anti-dumping duty on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the People’s Republic of China (OJ L 146, 9.6.2017, p.17), Commission Implementing Regulation (EU) 2019/687 of 2 May 2019 imposing a definitive anti-dumping duty on imports of certain organic coated steel products originating in the People’s Republic of China following an expiry review pursuant to Article 11(2) of Regulation (EU) 2016/1036 of the European Parliament and of the Council (OJ L 116, 3.5.2019, p. 5), and Commission Implementing Regulation (EU) 2019/688 of 2 May 2019 imposing a definitive countervailing duty on imports of certain organic coated steel products originating in the People’s Republic of China following an expiry review pursuant to Article 18 of Regulation (EU) 2016/1037 of the European Parliament and of the Council (OJ L 116, 3.5.2019, p. 39).
(12) Report – Chapter 2, p. 6-7.
(13) Report – Chapter 2, p. 10.
(14) Available at http://www.fdi.gov.cn/1800000121_39_4866_0_7.html (last viewed 15 July 2019).
(15) Report – Chapter 2, p. 20-21.
(16) Report – Chapter 3, p. 41, 73-74.
(17) Report – Chapter 6, p. 120-121.
(18) Report – Chapter 6, p. 122-135.
(19) Report – Chapter 7, p. 167-168.
(20) Report – Chapter 8, p. 169-170, 200-201.
(21) Report – Chapter 2, p. 15-16, Report – Chapter 4, p. 50, p. 84, Report – Chapter 5, p. 108-9.
(22) Report – Chapter 3, p. 22-24 and Chapter 5, p. 97-108.
(23) Report – Chapter 5, p. 104-9.
(24) Report – Chapter 14, p. 358: 51 % private and 49 % SOEs in terms of production and 44 % SOEs and 56 % private companies in terms of capacity.
(25) Available at www.gov.cn/zhengce/content/2016-02/04/content_5039353.htm (last viewed 12 September 2019), https://policycn.com/policy_ticker/higher-expectations-for-large-scale-steel-enterprise/?iframe=1&secret=c8uthafuthefra4e
(last viewed 15 July 2019), and www.xinhuanet.com/english/2019-04/23/c_138001574.htm (last viewed 11 September 2019).
(26) Available at http://www.xinhuanet.com/english/2019-04/23/c_138001574.htm (last viewed 12 September 2019) and http://www.jjckb.cn/2019-04/23/c_137999653.htm (last viewed 12 September 2019).
(27) As was the case of the merger between the private company Rizhao and the SOE Shandong Iron and Steel in 2009. See Beijing steel report, p. 58, and the acquired majority stake of China Baowu Steel Group in Magang Steel in June 2019, see https://www.ft.com/content/a7c93fae-85bc-11e9-a028-86cea8523dc2 (last viewed 11 September 2019).
(28) OJ L 116, 3.5.2019, p.39.
(29) OJ L 176, 30.6.2016, p.55
(30) PwC Automotive Industry Bluebook (2017 Edition) China Automotive Market: Witnessing the Transformation, p.36, available at https://www.pwccn.com/en/automotive/pwc-auto-industry-blue-book.pdf (last viewed 21 August 2019); J.D. Power China Market Insight – China’s Five Year Plan, available at https://www.jdpower.com/sites/default/files/china_five_year_plan.pdf (last viewed 21 August 2019).
(31) Report – Chapter 5, p. 100-1.
(32) Report – Chapter 2, p. 26.
(33) Report – Chapter 2, p. 31-2.
(34) Available at https://www.reuters.com/article/us-china-congress-companies-idUSKCN1B40JU (last viewed 15 July 2019).
(35) The full text of the plan is available on the MIIT website: http://www.miit.gov.cn/n1146295/n1652858/n1652930/n3757016/c5353943/content.html (last viewed 16 July 2019)
(36) Available at http://tv.baosteel.com/ir/pdf/report/600019_2016_2e.pdf (last viewed 15 July 2019).
(37) See Recital (64) of Commission Implementing Regulation (EU) 2017/969 of 8 June 2017 imposing definitive countervailing duties on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the People’s Republic of China and amending Commission Implementing Regulation (EU) 2017/649 imposing a definitive anti-dumping duty on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the People’s Republic of China (OJ L 146, 9.6.2017, p. 17).
(38) SAIC Motor Annual Report 2018, p.24, available at https://www.saicmotor.com/english/images/investor_relations/annual_report/2019/7/10/FCA72DB2F082468293A9E76A81E5DFE2.pdf (last viewed 21 August 2019).
(39) Report – Chapters 14.1 to 14.3.
(40) Report – Chapter 4, p. 41-42 and 83.
(41) Report, Part III, Chapter 14, p. 346 ff.
(42) Introduction to the Plan for Adjusting and Upgrading the Steel Industry.
(43) Report, Chapter 14, p. 347.
(44) The 13th Five-Year Plan for Economic and Social Development of the People’s Republic of China (2016-2020), available at http://en.ndrc.gov.cn/newsrelease/201612/P020161207645765233498.pdf (last viewed 15 July 2019).
(45) Report – Chapter 14, p. 349.
(46) Report – Chapter 14, p. 352.
(47) Catalogue for Guiding Industry Restructuring (2011 Version) (2013 Amendment) issued by Order No 9 of the National Development and Reform Commission on 27 March 2011, and amended in accordance with the Decision of the National Development and Reform Commission on Amending the Relevant Clauses of the Catalogue for Guiding Industry Restructuring (2011 Version) issued by Order No 21 of the National Development and Reform Commission on 16 February 2013.
(48) See Recital (56) of Commission Implementing Regulation (EU) 2017/969 of 8 June 2017 imposing definitive countervailing duties on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the People’s Republic of China and amending Commission Implementing Regulation (EU) 2017/649 imposing a definitive anti-dumping duty on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the People’s Republic of China (OJ L 146, 9.6.2017, p.17).
(49) Report – Chapter 14, pp. 375 – 376.
(50) Report – Chapter 6, p. 138-149.
(51) Report – Chapter 9, p. 216.
(52) Report – Chapter 9, p. 213-215.
(53) Report – Chapter 9, p. 209-211.
(54) See recitals 281-311 of Commission Implementing Regulation (EU) 2017/969 of 8 June 2017 imposing definitive countervailing duties on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the People’s Republic of China and amending Commission Implementing Regulation (EU) 2017/649 imposing a definitive anti-dumping duty on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the People’s Republic of China (OJ L 146, 9.6.2017, p. 17).
(55) Report – Chapter 13, p. 332-337.
(56) Report – Chapter 13, p. 336.
(57) Report – Chapter 13, p. 337-341.
(58) Report – Chapter 6, p. 114-117.
(59) Report – Chapter 6, p. 119.
(60) Report – Chapter 6, p. 120.
(61) Report – Chapter 6, p. 121-122, 126-128, 133-135.
(62) See IMF Working Paper ‘Resolving China’s Corporate Debt Problem’, by Wojciech Maliszewski, Serkan Arslanalp, John Caparusso, José Garrido, Si Guo, Joong Shik Kang, W. Raphael Lam, T. Daniel Law, Wei Liao, Nadia Rendak, Philippe Wingender, Jiangyan, October 2016, WP/16/203.
(63) Report – Chapter 6, p. 121-122, 126-128, 133-135.
(64) See recitals (83)-(244) of Commission Implementing Regulation (EU) 2017/969 of 8 June 2017 imposing definitive countervailing duties on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the People’s Republic of China and amending Commission Implementing Regulation (EU) 2017/649 imposing a definitive anti-dumping duty on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the People’s Republic of China (OJ L 146, 9.6.2017, p. 17).
(65) World Bank Open Data – Upper Middle Income, available at https://data.worldbank.org/income-level/upper-middle-income (last viewed 15 July 2019).
(66) If there is no production of the product under review in any country with a similar level of development, production of a product in the same general category and/or sector of the product under review may be considered.
(67) Available at
https://qdd.oecd.org/subject.aspx?Subject=ExportRestrictions_IndustrialRawMaterials (last viewed 3 July 2019).
(68) Available at http://portal.siscomex.gov.br/legislacao/legislacao/mais-legislacoes/mcti (last viewed 3 July 2019).
(69) For example see https://www.jornalcontabil.com.br/quanto-custa-um-funcionario-aprenda-a-calcular/ or https://establishbrazil.com/articles/whats-real-cost-employee (last viewed 3 July 2019).
(70) Available at
https://www.iochpe.com.br/Download.aspx?Arquivo=Es93IRz+hvwnExFo7bRkrA== (last viewed 4 July 2019).
(71) Brazilian imports are reported at FOB level in GTA.
(72) Brazilian exports are reported at FOB level in GTA.
(73) Available at http://www.meps.co.uk/L.AmerPrice.htm (last viewed 29 August 2019); the product is described as follows: Sections and Beams — 240mm x 240mm H-Beam — except USA and Canada: 10 inches x 10 inches wide flange beam and China: 300mm x 300mm H-beam (available at http://www.meps.co.uk/definitions.htm (last viewed 29 August 2019)).
(74) Available at https://www.ilo.org/ilostat/faces/oracle/webcenter/portalapp/pagehierarchy/Page21.jspx?_afrLoop=518377340582818&_afrWindowMode=0&_afrWindowId=o8k2wnnrz_1#!%40%40%3F_afrWindowId%3Do8k2wnnrz_1%26_afrLoop%3D518377340582818%26_afrWindowMode%3D0%26_adf.ctrl-state%3Do8k2wnnrz_54 (last viewed 4 July 2019).
(75) Available at https://establishbrazil.com/articles/whats-real-cost-employee (last viewed 4 July 2019).
(76) Available at http://www.edp.com.br/distribuicao-es/saiba-mais/informativos/tarifas-aplicadas-a-clientes-atendidos-em-alta-e-media-tensao-(grupo-a) (last viewed 10 April 2019).
(77) Available at http://www.aneel.gov.br/a-aneel (last viewed 10 April 2019).
(78) Available at http://www.aneel.gov.br/bandeiras-tarifarias (last viewed 10 April 2019).
(79) Available at http://www.edp.com.br/distribuicao-es/saiba-mais/informativos/bandeira-tarifaria (last viewed 10 April 2019).
(80) Boletim mensal de acompanhamento da indústria de gás natural, available at http://www.mme.gov.br/documents/1138769/0/Boletim_Gas_Natural_nr_142_DEZ_18.pdf/49912e53-03ee-47cc-a45e-7ffa093ff777 (last viewed 16 July 2019).
(81) Available at http://site.sabesp.com.br/site/interna/Default.aspx?secaoId=183 (last viewed 10 April 2019).
(82) For example the Metropolitan area http://site.sabesp.com.br/site/uploads/file/asabesp_doctos/comunicado_06_2018.pdf (last viewed 10 April 2019).
(83) See Note of 16 April 2019 (No t19.001778).
(84) As mentioned in recital (179), the exporting producer in question exported to the Union directly to independent customers. Thus, the export price used for the undercutting calculations was the price actually paid or payable for the product concerned when sold for export to the Union, in accordance with Article 2(8) of the basic Regulation.
(85) Commission Implementing Regulation (EU) 404/2010 of 10 May 2010 imposing a provisional anti-dumping duty on imports of certain aluminium wheels originating in the People’s Republic of China (OJ L 117, 11.5.2010, p. 76), recital (133).
(86) Details of the calculation are in the limited version of the mission report concerning Company H.
(87) Commission Implementing Regulation (EU) 2017/109 of 23 January 2017 imposing a definitive anti-dumping duty on imports of certain aluminium road wheels originating in the People’s Republic of China following an expiry review pursuant to Article 11(2) of Regulation (EU) 2016/1036 of the European Parliament and of the Council (OJ L 18, 24.1.2017, p. 1), recitals (250) to (268).
(88) European Commission, Directorate-General for Trade, Directorate H, Rue de la Loi 170, 1040 Brussels, Belgium.
ANNEX I
Chinese cooperating exporting producers not sampled
Name |
TARIC additional code |
Dongfeng Automobile Chassis System CO., Ltd (also called ‘Dongfeng Automotive Wheel Co., Ltd’) |
|
Hangzhou Forlong Impex Co., Ltd |
|
Hangzhou Xingjie Auto Parts Manufacturing Co., Ltd |
|
Jiaxing Henko Auto Spare Parts Co., Ltd |
|
Jining Junda Machinery Manufacturing Co., Ltd |
|
Nantong Tuenz Corporate Co., Ltd |
|
Ningbo Luxiang Autoparts Manufacturing Co., Ltd |
|
Shandong Zhengshang Wheel Technology Co., Ltd |
|
Shandong Zhengyu Wheel Group Co., Ltd |
|
Xiamen Sunrise Group Co., Ltd |
|
Yantai Leeway Electromechanical Equipment Co., Ltd |
|
Yongkang Yuefei Wheel Co., Ltd |
|
Zhejiang Jingu Co., Ltd |
|
Zhejiang Fengchi Mechanical Co., Ltd |
|
Zhengxing Wheel Group Co., Ltd |
|
Zhenjiang R & D Auto Parts Co., Ltd |
|
DECISIONS
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/58 |
COUNCIL DECISION (EU) 2019/1694
of 4 October 2019
appointing an alternate member, proposed by Hungary, of the Committee of the Regions
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 305 thereof,
Having regard to the proposal of the Hungarian Government,
Whereas:
(1) |
On 26 January 2015, 5 February 2015 and 23 June 2015, the Council adopted Decisions (EU) 2015/116 (1), (EU) 2015/190 (2) and (EU) 2015/994 (3) appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020. |
(2) |
An alternate member’s seat has become vacant following the end of the term of office of Mr Béla KOCSY, |
HAS ADOPTED THIS DECISION:
Article 1
The following is hereby appointed as an alternate member of the Committee of the Regions for the remainder of the current term of office, which runs until 25 January 2020:
— |
Ms Henrietta MAKAY-BERÓ, deputy mayor of the city of Tata. |
Article 2
This Decision shall enter into force on the date of its adoption.
Done at Luxembourg, 4 October 2019.
For the Council
The President
K. MIKKONEN
(1) Council Decision (EU) 2015/116 of 26 January 2015 appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020 (OJ L 20, 27.1.2015, p. 42).
(2) Council Decision (EU) 2015/190 of 5 February 2015 appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020 (OJ L 31, 7.2.2015, p. 25).
(3) Council Decision (EU) 2015/994 of 23 June 2015 appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020 (OJ L 159, 25.6.2015, p. 70).
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/59 |
COUNCIL DECISION (EU) 2019/1695
of 4 October 2019
appointing four members and five alternate members, proposed by the Kingdom of the Netherlands, of the Committee of the Regions
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 305 thereof,
Having regard to the proposal of the Government of the Netherlands,
Whereas:
(1) |
On 26 January 2015, 5 February 2015 and 23 June 2015, the Council adopted Decisions (EU) 2015/116 (1), (EU) 2015/190 (2) and (EU) 2015/994 (3) appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020. On 18 September 2015, by Council Decision (EU) 2015/1573 (4), Ms Hester MAIJ, Mr Bert GIJSBERTS, Mr Ralph DE VRIES and Mr Bote WILPSTRA were replaced by Mr Michiel SCHEFFER, Mr Theo BOVENS, Mr John JORRITSMA and Mr Cees LOGGEN as members, and Ms Elvira SWEET, Ms Annemieke TRAAG, Mr Theo BOVENS and Mr Hans KONST were replaced by Mr Erik LIEVERS, Ms Mariëtte PENNARTS-POUW, Mr Michiel RIJSBERMAN and Mr Ard VAN DER TUUK as alternate members. On 18 July 2016, by Council Decision (EU) 2016/1205 (5), Mr Ard VAN DER TUUK was replaced by Mr Tjisse STELPSTRA as an alternate member. On 7 October 2016, by Council Decision (EU) 2016/1816 (6), Mr John JORRITSMA was replaced by Mr Klaas KIELSTRA as a member. On 25 September 2017, by Council Decision (EU) 2017/1765 (7), Mr Michiel SCHEFFER was replaced by Ms Annemieke TRAAG as a member and Mr Erik LIEVERS was replaced by Mr Michiel SCHEFFER as an alternate member. |
(2) |
Four member’s seat on the Committee of the Regions have become vacant following the end of the terms of office of Ms Annemieke TRAAG, Mr Klaas KIELSTRA, Mr Theo BOVENS and Mr Cees LOGGEN. |
(3) |
Three alternate members’ seats on the Committee of the Regions have become vacant following the end of the terms of office of Ms Mariëtte PENNARTS-POUW, Mr Michiel SCHEFFER and Mr Ben DE REU. |
(4) |
Two alternate members’ seat have become vacant following the appointment of Mr Michiel RIJSBERMAN and Mr Tjisse STELPSTRA as members of the Committee of the Regions, |
HAS ADOPTED THIS DECISION:
Article 1
The following are hereby appointed to the Committee of the Regions for the remainder of the current term of office, which runs until 25 January 2020:
(a) |
as members:
|
(b) |
as alternate members:
|
Article 2
This Decision shall enter into force on the date of its adoption.
Done at Luxembourg, 4 October 2019.
For the Council
The President
K. MIKKONEN
(1) Council Decision (EU) 2015/116 of 26 January 2015 appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020 (OJ L 20, 27.1.2015, p. 42).
(2) Council Decision (EU) 2015/190 of 5 February 2015 appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020 (OJ L 31, 7.2.2015, p. 25).
(3) Council Decision (EU) 2015/994 of 23 June 2015 appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020 (OJ L 159, 25.6.2015, p. 70).
(4) Council Decision (EU) 2015/1573 of 18 September 2015 appointing four Dutch members and five Dutch alternate members of the Committee of the Regions (OJ L 245, 22.9.2015, p. 10).
(5) Council Decision (EU) 2016/1205 of 18 July 2016 appointing two alternate members, proposed by the Kingdom of the Netherlands of the Committee of the Regions (OJ L 198, 23.7.2016, p. 46).
(6) Council Decision (EU) 2016/1816 of 7 October 2016 appointing a member, proposed by the Kingdom of the Netherlands of the Committee of the Regions (OJ L 278, 14.10.2016, p. 44).
(7) Council Decision (EU) 2017/1765 of 25 September 2017 appointing two members and two alternate members, proposed by the Kingdom of the Netherlands, of the Committee of the Regions (OJ L 250, 28.9.2017, p. 59).
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/61 |
COUNCIL DECISION (EU) 2019/1696
of 4 October 2019
appointing a member and five alternate members, proposed by the Kingdom of Spain, of the Committee of the Regions
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 305 thereof,
Having regard to the proposal of the Spanish Government,
Whereas:
(1) |
On 26 January 2015, 5 February 2015 and 23 June 2015, the Council adopted Decisions (EU) 2015/116 (1), (EU) 2015/190 (2) and (EU) 2015/994 (3) appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020. On 5 October 2015, by Council Decision (EU) 2015/1792 (4) (4), Ms Teresa GIMÉNEZ DELGADO DE TORRES was replaced by Mr Cruz FERNÁNDEZ MARISCAL as an alternate member. On 9 October 2015, by Council Decision (EU) 2015/1915 (5), Mr Esteban MAS PORTELL was replaced by Mr Marc PONS i PONS as an alternate member. On 14 March 2016, by Council Decision (EU) 2016/409 (6) Mr Roberto Pablo BERMÚDEZ DE CASTRO Y MUR was replaced by Mr Vicente GUILLÉN IZQUIERDO as an alternate member. On 9 June 2016, by Council Decision (EU) 2016/991 (7), Mr Marc PONS i PONS was replaced by Ms Pilar COSTA i SERRA as an alternate member. On 18 July 2016, by Council Decision (EU) 2016/1203 (8), Mr Roger ALBINYANA i SAIGÍ was replaced by Mr Amadeu ALTAFAJ i TARDIO as an alternate member. On 21 March 2017, by Council Decision (EU) 2017/551 (9), Mr Cruz FERNÁNDEZ MARISCAL was replaced by Ms Virginia MARCO CÁRCEL as an alternate member. On 22 May 2018, by Council Decision (EU) 2018/770 (10), Ms Pilar COSTA i SERRA was replaced by Mr Josep Enric CLAVEROL i FLORIT as an alternate member. On 8 October 2018, by Council Decision (EU) 2018/1502 (11) (5), Mr Amadeu ALTAFAJ i TARDIO was replaced by Ms Natàlia MAS GUIX as an alternate member. On 13 May 2019, by Council Decision (EU) 2019/809 (12), Ms Natàlia MAS GUIX was replaced by Ms Mireia BORRELL PORTA as an alternate member. |
(2) |
A member’s seat on the Committee of the Regions has become vacant following the end of the term of office of Mr Javier FERNÁNDEZ FERNÁNDEZ, |
(3) |
Three alternate members’ seats on the Committee of the Regions have become vacant following the end of the terms of office of Mr Guillermo MARTÍNEZ SUÁREZ, Mr Vicente GUILLÉN IZQUIERDO and Mr Josep Enric CLAVEROL i FLORIT. |
(4) |
Two alternate members’ seats on the Committee of the Regions have become vacant following the end of the mandates on the basis of which Ms Mireia BORRELL PORTA (Directora General de Relaciones Exteriores, Generalitat de Catalunya) and Ms Virginia MARCO CÁRCEL (Directora General de Relaciones Institucionales y Asuntos Europeos de la Vicepresidencia de la Junta de Comunidades de Castilla-La Mancha) were proposed, |
HAS ADOPTED THIS DECISION:
Article 1
The following are hereby appointed to the Committee of the Regions for the remainder of the current term of office, which runs until 25 January 2020:
(a) |
as a member:
|
(b) |
as alternate members:
|
Article 2
This Decision shall enter into force on the date of its adoption.
Done at Brussels, Luxembourg, 4 October 2019.
For the Council
The President
K. MIKKONEN
(1) Council Decision (EU) 2015/116 of 26 January 2015 appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020 (OJ L 20, 27.1.2015, p. 42).
(2) Council Decision (EU) 2015/190 of 5 February 2015 appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020 (OJ L 31, 7.2.2015, p. 25).
(3) Council Decision (EU) 2015/994 of 23 June 2015 appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2015 to 25 January 2020 (OJ L 159, 25.6.2015, p. 70).
(4) Council Decision (EU) 2015/1792 of 5 October 2015 appointing five Spanish members and five Spanish alternate members of the Committee of the Regions (OJ L 260, 7.10.2015, p. 28).
(5) Council Decision (EU) 2015/1915 of 9 October 2015 appointing two Spanish members and three Spanish alternate members of the Committee of the Regions (OJ L 280, 24.10.2015, p. 26).
(6) Council Decision (EU) 2016/409 of 14 March 2016 appointing a member and an alternate member, proposed by the Kingdom of Spain, of the Committee of the Regions (OJ L 74, 19.3.2016, p. 38).
(7) Council Decision (EU) 2016/991 of 9 June 2016 appointing an alternate member, proposed by the Kingdom of Spain of the Committee of the Regions (OJ L 162, 21.6.2016, p. 14).
(8) Council Decision (EU) 2016/1203 of 18 July 2016 appointing a member and an alternate member, proposed by the Kingdom of Spain, of the Committee of the Regions (OJ L 198, 23.7.2016, p. 44).
(9) Council Decision (EU) 2017/551 of 21 March 2017 appointing an alternate member, proposed by the Kingdom of Spain, of the Committee of the Regions (OJ L 79, 24.3.2017, p. 7).
(10) Council Decision (EU) 2018/770 of 22 May 2018 appointing an alternate member, proposed by the Kingdom of Spain, of the Committee of the Regions (OJ L 129, 25.5.2018, p. 81).
(11) Council Decision (EU) 2018/1502 of 8 October 2018 appointing a member and an alternate member, proposed by the Kingdom of Spain, of the Committee of the Regions (OJ L 254, 10.10.2018, p. 7).
(12) Council Decision (EU) 2019/809 of 13 May 2019 appointing an alternate member, proposed by the Kingdom of Spain, of the Committee of the Regions (OJ L 133, 21.5.2019, p. 10).
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/63 |
COUNCIL IMPLEMENTING DECISION (EU) 2019/1697
of 7 October 2019
on the launch of automated data exchange with regard to vehicle registration data in Ireland
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Council Decision 2008/615/JHA of 23 June 2008 on the stepping up of cross‐border cooperation, particularly in combating terrorism and cross‐border crime (1), and in particular Article 33 thereof,
Having regard to the opinion of the European Parliament (2),
Whereas:
(1) |
In accordance with Article 25(2) of Decision 2008/615/JHA, the supply of personal data provided for under that Decision may not take place until the general provisions on data protection set out in Chapter 6 of that Decision have been implemented in the national law of the territories of the Member States involved in such supply. |
(2) |
Article 20 of Council Decision 2008/616/JHA (3) provides that the verification that the condition referred to in recital 1 has been met with respect to automated data exchange in accordance with Chapter 2 of Decision 2008/615/JHA is to be done on the basis of an evaluation report based on a questionnaire, an evaluation visit and a pilot run. |
(3) |
In accordance with point 1.1 of Chapter 4 of the Annex to Decision 2008/616/JHA, the questionnaire drawn up by the relevant Council Working Group concerns each of the automated data exchanges and is to be answered by a Member State as soon as it believes it fulfils the prerequisites for sharing data in the relevant data category. |
(4) |
Ireland has completed the questionnaire on data protection and the questionnaire on vehicle registration data (VRD) exchange. |
(5) |
A successful pilot run has been carried out by Ireland with the Netherlands. |
(6) |
An evaluation visit has taken place in Ireland and a report on the evaluation visit has been produced by the Dutch and Portuguese evaluation team and forwarded to the relevant Council Working Group. |
(7) |
An overall evaluation report, summarising the results of the questionnaire, the evaluation visit and the pilot run concerning VRD exchange, has been presented to the Council. |
(8) |
On 7 March 2019, the Council, having noted the agreement of all Member States bound by Decision 2008/615/JHA, concluded that Ireland had fully implemented the general provisions on data protection set out in Chapter 6 of Decision 2008/615/JHA. |
(9) |
Therefore, for the purposes of automated searching of VRD, Ireland should be entitled to receive and supply personal data pursuant to Article 12 of Decision 2008/615/JHA. |
(10) |
Article 33 of Decision 2008/615/JHA confers implementing powers upon the Council with a view to adopting measures necessary to implement that Decision, in particular as regards the receiving and supply of personal data provided for under that Decision. |
(11) |
As the conditions for triggering the exercise of such implementing powers have been met and the procedure in this regard has been followed, an Implementing Decision on the launch of automated data exchange with regard to VRD in Ireland should be adopted in order to allow that Member State to receive and supply personal data pursuant to Article 12 of Decision 2008/615/JHA. |
(12) |
Denmark, Ireland and the United Kingdom are bound by Decision 2008/615/JHA and are therefore taking part in the adoption and application of this Decision which implements Decision 2008/615/JHA, |
HAS ADOPTED THIS DECISION:
Article 1
For the purposes of automated searching of vehicle registration data, Ireland is entitled to receive and supply personal data pursuant to Article 12 of Decision 2008/615/JHA as from 11 October 2019.
Article 2
This Decision shall enter into force on the day following that of its publication in the Official Journal of the European Union.
This Decision shall apply in accordance with the Treaties.
Done at Luxembourg, 7 October 2019.
For the Council
The President
A.-M. HENRIKSSON
(2) Opinion of 17 September 2019 (not yet published in the Official Journal).
(3) Council Decision 2008/616/JHA of 23 June 2008 on the implementation of Decision 2008/615/JHA on the stepping up of cross-border cooperation, particularly in combating terrorism and cross-border crime (OJ L 210, 6.8.2008, p. 12).
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/65 |
COMMISSION IMPLEMENTING DECISION (EU) 2019/1698
of 9 October 2019
on European standards for products drafted in support of Directive 2001/95/EC of the European Parliament and of the Council on general product safety
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety (1), and in particular the first subparagraph of Article 4(2) thereof,
Whereas:
(1) |
In accordance with the second subparagraph of Article 3(2) of Directive 2001/95/EC, a product is to be presumed safe, as far as the risks and risk categories covered by the relevant national standards are concerned, when it conforms to voluntary national standards transposing European standards, the references of which have been published by the Commission in the Official Journal of the European Union in accordance with Article 4 of that Directive. |
(2) |
On 27 July 2011 the Commission adopted Decision 2011/479/EU (2) on the safety requirements to be met by the European standards for gymnastic equipment. |
(3) |
By letter M/507 of 5 September 2012, the Commission made a request to CEN for drawing up European standards to address the main risks associated with gymnastic equipment pursuant to the safety requirements. On the basis of that request, CEN adopted a standard: EN 913:2008 for gymnastic equipment — general safety requirements and test methods. The reference of that standard was published in the Official Journal of the European Union (3) on 11 July 2014 on the basis of Commission Implementing Decision 2014/357/EU (4). |
(4) |
Taking into account new knowledge and the development of the market, CEN drafted new European standard EN 913:2018. |
(5) |
European standard EN 913:2018 complies with the general safety requirement set out in Directive 2001/95/EC. Its reference should therefore be published in the Official Journal of the European Union. |
(6) |
On 29 November 2011 the Commission adopted Decision 2011/786/EU (5) on the safety requirements to be met by the European standards for bicycles, bicycles for young children, and luggage carriers for bicycles. |
(7) |
By letter M/508 of 6 September 2012, the Commission made a request to CEN for drawing up European standards to address the main risks associated with bicycles, bicycles for young children and luggage carriers for bicycles pursuant to the safety requirements. On the basis of that request, CEN adopted a series of standards: EN ISO 4210-2:2014 for requirements for city and trekking, young adult, mountain and racing bicycles and EN ISO 4210-6:2014 for frame and fork test methods. The references of those standards were published in the Official Journal of the European Union (6) on the basis of Commission Implementing Decision (EU) 2015/681 (7). |
(8) |
Taking into account new knowledge and the development of the market, CEN drafted new European standards EN ISO 4210-2-2015 and EN ISO 4210-6-2015. |
(9) |
European standards EN ISO 4210-2-2015 and EN ISO 4210-6-2015 comply with the general safety requirement set out in Directive 2001/95/EC. Their reference should therefore be published in the Official Journal of the European Union. |
(10) |
On the basis of the request M/508 of 6 September 2012 of the Commission, CEN adopted a standard: EN 14872:2006 for bicycles — Accessories for bicycles — Luggage carriers. The reference of that standard was published in the Official Journal of the European Union (8) on the basis of Commission Decision 2006/514/EC (9). |
(11) |
Taking into account new knowledge and the development of the market, CEN drafted new European standard EN ISO 11243:2016. |
(12) |
European standard EN ISO 11243:2016 complies with the general safety requirement set out in Directive 2001/95/EC. Its reference should therefore be published in the Official Journal of the European Union. |
(13) |
On 25 March 2008 the Commission adopted Decision 2008/264/EC (10) on the safety requirements to be met by the European standards for cigarettes. |
(14) |
By letter M/425 of 27 June 2008, the Commission made a request to the European Committee for Standardisation (CEN) for drawing up European standards to address the main risks associated with cigarettes pursuant to the fire safety requirements. On the basis of that request, CEN adopted the standard: EN ISO 12863:2010 on test method for assessing the ignition propensity of cigarettes. The reference of that standard was published in the Official Journal of the European Union (11) on the basis of Commission Decision 2011/496/EU (12). |
(15) |
Taking into account new knowledge and the development of the market, CEN amended standard EN ISO 12863:2010 by adopting the amendment EN ISO 12863:2010/A1:2016. |
(16) |
The amendment EN ISO 12863:2010/A1:2016 complies with the general safety requirement set out in Directive 2001/95/EC. Its reference should therefore be published in the Official Journal of the European Union. |
(17) |
On 27 July 2011 the Commission adopted Decision 2011/476/EU (13) on the safety requirements to be met by the European standards for stationary training equipment. |
(18) |
By letter M/506 of 5 September 2012, the Commission made a request to CEN for drawing up European standards to address the main risks associated with stationary training equipment pursuant to the safety requirements. On the basis of that request, CEN adopted a series of standards: EN 957-4:2006+A1:2010 for strength training benches, additional specific safety requirements and test methods; EN 957-5:2009 for stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods, EN 957-8:1998 for steppers, stairclimbers and climbers — additional specific safety requirements and test methods, EN 957-9:2003 for elliptical trainers, additional specific safety requirements and test methods, and EN 957-10:2005 for exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods. The references of those standards were published in the Official Journal of the European Union (14) on the basis of Implementing Decision 2014/357/EU. |
(19) |
Taking into account new knowledge and the development of the market, CEN drafted new standards EN ISO 20957-4:2016, EN ISO 20957-5:2016, EN ISO 20957-8:2017, EN ISO 20957-9:2016 and EN ISO 20957-10:2017. |
(20) |
European standards EN ISO 20957-4:2016, EN ISO 20957-5:2016, EN ISO 20957-8:2017, EN ISO 20957-9:2016 and EN ISO 20957-10:2017 comply with the general safety requirement set out in Directive 2001/95/EC. Their references should therefore be published in the Official Journal of the European Union. |
(21) |
On 21 April 2005 the Commission adopted Decision 2005/323/EC (15) on the safety requirements to be met by the European standards for floating leisure articles for use on and in the water. |
(22) |
By letter M/372 of 5 September 2012, the Commission made a request to CEN for drawing up European standards to address the main risks associated with floating leisure articles for use on and in the water pursuant to the safety requirements. On the basis of that request, CEN adopted a series of standards: EN 15649-1:2009+A2:2013, EN 15649-2:2009+A2:2013, EN 15649-3:2009+A1:2012, EN 15649-4:2010+A1:2012, EN 15649-5:2009, EN 15649-6:2009+A1:2013, EN 15649-7:2009 for floating leisure articles for use on and in the water. The references of that series of standards were published in the Official Journal of the European Union (16) on the basis of Commission Implementing Decisions 2014/359/EU (17), 2014/875/EU (18) and 2013/390/EU (19). |
(23) |
Taking into account new knowledge and the development of the market, CEN drafted new series of European standard EN ISO 25649:2017 (parts 1 – 7). |
(24) |
European standards EN ISO 25649:2017 (parts 1 – 7) comply with the general safety requirement set out in Directive 2001/95/EC. Their references should therefore be published in the Official Journal of the European Union. |
(25) |
European standards EN 913:2008, EN 957-4:2006+A1:2010, EN 957-5:2009, EN 957-8:1998, EN 957-9:2003, EN 957-10:2005, EN ISO 4210-2:2014, EN ISO 4210-6:2014, EN 14872:2006 and EN 15649 series are replaced by new or amended European standards the references of which are to be published by this Decision. It is therefore necessary to withdraw the references of those standards from the Official Journal of the European Union (20). |
(26) |
In the interests of clarity, a complete list of references of European standards drafted in support of Directive 2001/95/EC and satisfying the requirements they aim to cover should be published in one act. The references of European standards currently published in the Official Journal of the European Union (21) should therefore be included in this Decision. Consequently, it is necessary to repeal the relevant Commission Decisions on publication of those standards. |
(27) |
Compliance with the relevant national standard transposing European standard the references of which have been published in the Official Journal of the European Union confers a presumption of safety as far as the risks and risk categories covered by the relevant national standard are concerned from the date of publication of the reference of the European standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication. |
(28) |
The measures provided for in this Decision are in accordance with the opinion of the Committee established by Directive 2001/95/EC, |
HAS ADOPTED THIS DECISION:
Article 1
The references of European standards for products drafted in support of Directive 2001/95/EC, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.
Article 2
The references of European standards for products drafted in support of Directive 2001/95/EC, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union.
Article 3
Commission Decision C(2004) 1493 (22), Commission Decision 2005/718/EC (23), Decision 2006/514/EC, Commission Decision 2009/18/EC (24), Decision 2011/496/EU, Commission Implementing Decision 2012/29/EU (25), Implementing Decision 2013/390/EU, Implementing Decision 2014/357/EU, Commission Implementing Decision 2014/358/EU (26), Implementing Decision 2014/359/EU, Commission Implementing Decision 2014/531/EU (27), Implementing Decision 2014/875/EU, Implementing Decision (EU) 2015/681, Commission Implementing Decision (EU) 2015/1345 (28) and Commission Implementing Decision (EU) 2017/1014 (29) are repealed.
Article 4
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
Done at Brussels, 9 October 2019.
For the Commission
The President
Jean-Claude JUNCKER
(2) Commission Decision 2011/479/EU of 27 July 2011 on the safety requirements to be met by European standards for gymnastic equipment pursuant to Directive 2001/95/EC of the European Parliament and of the Council (OJ L 197, 29.7.2011, p. 13).
(3) Commission communication 2017/C 267/03 in the framework of the implementation of the Directive 2001/95/EC of the European Parliament and of the Council on general product safety (OJ C 267, 11.8.2017, p. 7).
(4) Commission Implementing Decision 2014/357/EU of 13 June 2014 on the compliance of European standards series EN 957 (parts 2 and 4-10) and EN ISO 20957 (part 1) for stationary training equipment and of ten European standards for gymnastic equipment with the general safety requirement of Directive 2001/95/EC of the European Parliament and of the Council and publication of the references of those standards in the Official Journal of the European Union (OJ L 175, 14.6.2014, p. 40).
(5) Commission Decision 2011/786/EU of 29 November 2011 on the safety requirements to be met by European standards for bicycles, bicycles for young children, and luggage carriers for bicycles pursuant to Directive 2001/95/EC of the European Parliament and of the Council (OJ L 319, 2.12.2011, p. 106).
(6) Commission communication 2017/C 267/03 in the framework of the implementation of the Directive 2001/95/EC of the European Parliament and of the Council on general product safety (OJ C 267, 11.8.2017, p. 7).
(7) Commission Implementing Decision (EU) 2015/681 of 29 April 2015 on the publication of the references of standard EN ISO 4210, parts 1-9, for city and trekking bicycles, mountain bicycles and racing bicycles, and of standard EN ISO 8098 for bicycles for young children in the Official Journal of the European Union pursuant to Directive 2001/95/EC of the European Parliament and of the Council (OJ L 111, 30.4.2015, p. 30).
(8) Commission communication 2017/C 267/03 in the framework of the implementation of the Directive 2001/95/EC of the European Parliament and of the Council on general product safety (OJ C 267, 11.8.2017, p. 7).
(9) Commission Decision 2006/514/EC of 20 July 2006 on compliance of certain standards with the general safety requirement of Directive 2001/95/EC and the publication of their references in the Official Journal (OJ L 200, 22.7.2006, p. 35).
(10) Commission Decision 2008/264/EC of 25 March 2008 on the fire safety requirements to be met by European standards for cigarettes pursuant to Directive 2001/95/EC of the European Parliament and of the Council (OJ L 83, 26.3.2008, p. 35).
(11) Commission communication 2017/C 267/03 in the framework of the implementation of the Directive 2001/95/EC of the European Parliament and of the Council on general product safety (OJ C 267, 11.8.2017, p. 7).
(12) Commission Decision 2011/496/EU of 9 August 2011 on the compliance of standard EN 16156:2010 ‘Cigarettes — Assessment of the ignition propensity — Safety requirement’ and of standard EN ISO 12863:2010 ‘Standard test method for assessing the ignition propensity of cigarettes’ with the general safety requirement of Directive 2001/95/EC of the European Parliament and of the Council and publication of the references of standard EN 16156:2010 ‘Cigarettes — Assessment of the ignition propensity — Safety requirement’ and of standard EN ISO 12863:2010 ‘Standard test method for assessing the ignition propensity of cigarettes’ in the Official Journal of the European Union (OJ L 205, 10.8.2011, p. 31).
(13) Commission Decision 2011/476/EU of 27 July 2011 on the safety requirements to be met by European standards for stationary training equipment pursuant to Directive 2001/95/EC of the European Parliament and of the Council (OJ L 196, 28.7.2011, p. 16).
(14) Commission communication 2017/C 267/03 in the framework of the implementation of the Directive 2001/95/EC of the European Parliament and of the Council on general product safety (OJ C 267, 11.8.2017, p. 7).
(15) Commission Decision 2005/323/EC of 21 April 2005 on the safety requirements to be met by the European standards for floating leisure articles for use on or in the water pursuant to Directive 2001/95/EC of the European Parliament and of the Council (OJ L 104, 23.4.2005, p. 39).
(16) Commission communication 2017/C 267/03 in the framework of the implementation of the Directive 2001/95/EC of the European Parliament and of the Council on general product safety (OJ C 267, 11.8.2017, p. 7).
(17) Commission Implementing Decision 2014/359/EU of 13 June 2014 on the compliance of European standards EN 15649-1:2009+A2:2013 and EN 15649-6:2009+A1:2013 for floating leisure articles for use on and in the water with the general safety requirement of Directive 2001/95/EC of the European Parliament and of the Council and publication of the references of those standards in the Official Journal of the European Union (OJ L 175, 14.6.2014, p. 45).
(18) Commission Implementing Decision 2014/875/EU of 4 December 2014 on the publication of the references of standard EN 15649-2:2009+A2:2013 for floating leisure articles for use on and in the water and of standard EN 957-6:2010+A1:2014 for stationary training equipment in the Official Journal of the European Union pursuant to Directive 2001/95/EC of the European Parliament and of the Council (OJ L 349, 5.12.2014, p. 65).
(19) Commission Implementing Decision 2013/390/EU of 18 July 2013 on the compliance of European standards series EN 15649 (parts 1-7) for floating leisure articles for use on and in the water with the general safety requirement of Directive 2001/95/EC of the European Parliament and of the Council and publication of the references of those standards in the Official Journal of the European Union (OJ L 196, 19.7.2013, p. 22).
(20) Commission communication 2017/C 267/03 in the framework of the implementation of the Directive 2001/95/EC of the European Parliament and of the Council on general product safety (OJ C 267, 11.8.2017, p. 7).
(21) Commission communication 2017/C 267/03 in the framework of the implementation of the Directive 2001/95/EC of the European Parliament and of the Council on general product safety (OJ C 267, 11.8.2017, p. 7).
(22) Commission Decision C(2004)1493 of 23 April 2004 on compliance of certain standards with the general safety requirement of Directive 2001/95/EC and the publication of their references in the Official Journal.
(23) Commission Decision 2005/718/EC of 13 October 2005 on compliance of certain standards with the general safety requirement of Directive 2001/95/EC of the European Parliament and of the Council and the publication of their references in the Official Journal (OJ L 271, 15.10.2005, p. 51).
(24) Commission Decision 2009/18/EC of 22 December 2008 on the compliance of standard EN 1273:2005 on baby walking frames with the general safety requirement of Directive 2001/95/EC of the European Parliament and of the Council and publication of the reference of the standard in the Official Journal (OJ L 8, 13.1.2009, p. 29).
(25) Commission Implementing Decision 2012/29/EU of 13 January 2012 on the compliance of standard EN 60065:2002/A12:2011 ‘Audio, video and similar electronic apparatus — Safety requirements’ and of standard EN 60950-1:2006/A12:2011 ‘Information technology equipment — Safety — Part 1: General requirements’ with the general safety requirement of Directive 2001/95/EC of the European Parliament and of the Council and on the publication of the references of those standards in the Official Journal of the European Union (OJ L 13, 17.1.2012, p. 7).
(26) Commission Implementing Decision 2014/358/EU of 13 June 2014 on the compliance of European standard EN 16281:2013 for consumer fitted child resistant locking devices for windows and balcony doors with the general safety requirement of Directive 2001/95/EC of the European Parliament and of the Council and publication of the reference of that standard in the Official Journal of the European Union (OJ L 175, 14.6.2014, p. 43).
(27) Commission Implementing Decision 2014/531/EU of 14 August 2014 on the compliance of European standards EN 16433:2014 and EN 16434:2014 and of certain clauses of European standard EN 13120:2009+A1:2014 for internal blinds with the general safety requirement of Directive 2001/95/EC of the European Parliament and of the Council and publication of the references of those standards in the Official Journal of the European Union (OJ L 243, 15.8.2014, p. 54).
(28) Commission Implementing Decision (EU) 2015/1345 of 31 July 2015 on the publication of the references of standards on cords and drawstrings on children’s clothing, on carry cots and stands, on safety barriers and on changing units for domestic use in the Official Journal of the European Union pursuant to Directive 2001/95/EC of the European Parliament and of the Council (OJ L 207, 4.8.2015, p. 73).
(29) Commission Implementing Decision (EU) 2017/1014 of 15 June 2017 on the publication of the references of the European standards EN 13869:2016 on child safety requirements for lighters and EN 13209-2:2015 on baby carriers in the Official Journal of the European Union pursuant to Directive 2001/95/EC of the European Parliament and of the Council (OJ L 153, 16.6.2017, p. 36).
ANNEX I
No |
Reference of the standard |
1. |
EN 581-1:2006 Outdoor furniture — Seating and tables for camping, domestic and contract use — Part 1: General safety requirements |
2. |
EN 913:2018 Gymnastic equipment — General safety requirements and test methods |
3. |
EN 914:2008 Gymnastic equipment — Parallel bars and combination asymmetric/parallel bars — Requirements and test methods including safety |
4. |
EN 915:2008 Gymnastic equipment — Asymmetric bars — Requirements and test methods including safety |
5. |
EN 916:2003 Gymnastic equipment — Vaulting boxes — Requirements and test methods including safety |
6. |
EN 957-2:2003 Stationary training equipment — Part 2: Strength training equipment, additional specific safety requirements and test methods |
7. |
EN 957-6:2010+A1:2014 Stationary training equipment — Part 6: Treadmills, additional specific safety requirements and test methods |
8. |
EN 957-7:1998 Stationary training equipment — Part 7: Rowing machines, additional specific safety requirements and test methods |
9. |
EN 1129-1:1995 Furniture — Foldaway beds — Safety requirements and testing — Part 1: Safety requirements |
10. |
EN 1129-2:1995 Furniture — Foldaway beds — Safety requirements and testing — Part 2: Test methods |
11. |
EN 1130-1:1996 Furniture — Cribs and cradles for domestic use — Part 1: Safety requirements |
12. |
EN 1130-2:1996 Furniture — Cribs and cradles for domestic use — Part 2: Test methods |
13. |
EN 1273:2005 Child use and care articles — Baby walking frames — Safety requirements and test methods |
14. |
EN 1466:2014 Child use and care articles — Carry cots and stands — Safety requirements and test methods |
15. |
EN 1651:1999 Paragliding equipment — Harnesses — Safety requirements and strength tests |
16. |
EN 1930:2011 Child use and care articles — Safety barriers — Safety requirements and test methods |
17. |
EN ISO 4210-1:2014 Cycles — Safety requirements for bicycles — Part 1: Terms and definitions (ISO 4210-1:2014) |
18. |
EN ISO 4210-2:2015 Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles (ISO 4210-2:2015) |
19. |
EN ISO 4210-3:2014 Cycles — Safety requirements for bicycles — Part 3: Common test methods (ISO 4210-3:2014) |
20. |
EN ISO 4210-4:2014 Cycles — Safety requirements for bicycles — Part 4: Braking test methods (ISO 4210-4:2014) |
21. |
EN ISO 4210-5:2014 Cycles — Safety requirements for bicycles — Part 5: Steering test methods (ISO 4210-5:2014, Corrected version 2015-02-01) |
22. |
EN ISO 4210-6:2015 Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods (ISO 4210-6:2015) |
23. |
EN ISO 4210-7:2014 Cycles — Safety requirements for bicycles — Part 7: Wheels and rims test methods (ISO 4210-7:2014) |
24. |
EN ISO 4210-8:2014 Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test methods (ISO 4210-8:2014) |
25. |
EN ISO 4210-9:2014 Cycles — Safety requirements for bicycles — Part 9: Saddles and seat-post test methods (ISO 4210-9:2014) |
26. |
EN ISO 8098:2014 Cycles — Safety requirements for bicycles for young children (ISO 8098:2014) |
27. |
EN ISO 9994:2006 Lighters — Safety specification (ISO 9994:2005) |
28. |
EN ISO 11243:2016 Cycles — Luggage carriers for bicycles — Requirements and test methods (ISO 11243:2016) |
29. |
EN 12196:2003 Gymnastic equipment — Horses and bucks — Functional and safety requirements, test methods |
30. |
EN 12197:1997 Gymnastic equipment — Horizontal bars — Safety requirements and test methods |
31. |
EN 12221-1:2008+A1:2013 Child use and care articles — Changing units for domestic use — Part 1: Safety requirements |
32. |
EN 12221-2:2008+A1:2013 Child use and care articles — Changing units for domestic use — Part 2: Test methods |
33. |
EN 12346:1998 Gymnastic equipment — Wall bars, lattice ladders and climbing frames — Safety requirements and test methods |
34. |
EN 12432:1998 Gymnastic equipment — Balancing beams — Functional and safety requirements, test methods |
35. |
EN 12491:2001 Paragliding equipment — Emergency parachutes — Safety requirements and test methods |
36. |
EN 12655:1998 Gymnastic equipment — Hanging rings — Functional and safety requirements, test methods |
37. |
EN ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010) EN ISO 12863:2010/A1:2016 |
38. |
EN 13120:2009+A1:2014 Internal blinds — Performance requirements including safety |
39. |
EN 13209-1:2004 Child use and care articles — Baby carriers — Safety requirements and test methods — Part 1: Framed back carriers |
40. |
EN 13209-2:2015 Child use and care articles — Baby carriers — Safety requirements and test methods — Part 2: Soft carrier |
41. |
EN 13219:2008 Gymnastic equipment — Trampolines — Functional and safety requirements, test methods |
42. |
EN 13319:2000 Diving accessories — Depth gauges and combined depth and time measuring devices — Functional and safety requirements, test methods |
43. |
EN 13869:2016 Lighters — Child safety requirements for lighters — Safety requirements and test methods |
44. |
EN 13899:2003 Roller sports equipment — Roller skates — Safety requirements and test methods |
45. |
EN 14059:2002 Decorative oil lamps — Safety requirements and test methods |
46. |
EN 14344:2004 Child use and care articles — Child seats for cycles — Safety requirements and test methods |
47. |
EN 14350-1:2004 Child use and care articles — Drinking equipment — Part 1: General and mechanical requirements and tests |
48. |
EN 14682:2014 Safety of children’s clothing — Cords and drawstrings on children’s clothing — Specifications |
49. |
EN 16156:2010 Cigarettes — Assessment of the ignition propensity — Safety requirement |
50. |
EN 16281:2013 Child protective products — Consumer fitted child resistant locking devices for windows and balcony doors — Safety requirements and test methods |
51. |
EN 16433:2014 Internal blinds — Protection from strangulation hazards — Test methods |
52. |
EN 16434:2014 Internal blinds — Protection from strangulation hazards — Requirements and test methods for safety devices |
53. |
EN ISO 20957-1:2013 Stationary training equipment — Part 1: General safety requirements and test methods (ISO 20957-1:2013) |
54. |
EN ISO 20957-4:2016 Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods (ISO 20957-4:2016) |
55. |
EN ISO 20957-5:2016 Stationary training equipment — Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods (ISO 20957-5:2016) |
56. |
EN ISO 20957-8:2017 Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods (ISO 20957-8:2017) |
57. |
EN ISO 20957-9:2016 Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements and test methods (ISO 20957-9:2016) |
58. |
EN ISO 20957-10:2017 Stationary training equipment — Part 10: Exercise bicycles with a fixed wheel or without freewheel — Additional specific safety requirements and test methods (ISO 20957-10:2017) |
59. |
EN ISO 25649-1:2017 Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) |
60. |
EN ISO 25649-2:2017 Floating leisure articles for use on and in the water — Part 2: Consumer information (ISO 25649-2:2017) |
61. |
EN ISO 25649-3:2017 Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2017) |
62. |
EN ISO 25649-4:2017 Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2017) |
63. |
EN ISO 25649-5:2017 Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2017) |
64. |
EN ISO 25649-6:2017 Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2017) |
65. |
EN ISO 25649-7:2017 Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017) |
66. |
EN 60065:2002 Audio, video and similar electronic apparatus — Safety requirements IEC 60065:2001 (Modified) EN 60065:2002/A12:2011 |
67. |
EN 60950-1:2006 Information technology equipment — Safety — Part 1: General requirements IEC 60950-1:2005 (Modified) EN 60950-1:2006/A12:2011 |
ANNEX II
No |
Reference of the standard |
1. |
EN 913:2008 Gymnastic equipment — General safety requirements and test methods |
2. |
EN 957-4:2006+A1:2010 Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods |
3. |
EN 957-5:2009 Stationary training equipment — Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods |
4. |
EN 957-8:1998 Stationary training equipment — Part 8: Steppers, stairclimbers and climbers — Additional specific safety requirements and test methods |
5. |
EN 957-9:2003 Stationary training equipment — Part 9: Elliptical trainers, additional specific safety requirements and test methods |
6. |
EN 957-10:2005 Stationary training equipment — Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods |
7. |
EN ISO 4210-2:2014 Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles (ISO 4210-2:2014) |
8. |
EN ISO 4210-6:2014 Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods (ISO 4210-6:2014) |
9. |
EN ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010) |
10. |
EN 14872:2006 Bicycles — Accessories for bicycles — Luggage carriers |
11. |
EN 15649-1:2009+A2:2013 Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods |
12. |
EN 15649-2:2009+A2:2013 Floating leisure articles for use on and in the water — Part 2: Consumer information |
13. |
EN 15649-3:2009+A1:2012 Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices |
14. |
EN 15649-4:2010+A1:2012 Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices |
15. |
EN 15649-5:2009 Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices |
16. |
EN 15649-6:2009+A1:2013 Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices |
17. |
EN 15649-7:2009 Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for class E devices |
III Other acts
EUROPEAN ECONOMIC AREA
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/75 |
EFTA SURVEILLANCE AUTHORITY DELEGATED DECISION
No 42/19/COL
of 17 June 2019
to exempt the operation of public bus transport services in Norway from the application of Directive 2014/25/EU of the European Parliament and of the Council [2019/…]
THE EFTA SURVEILLANCE AUTHORITY,
Having regard to the Act referred to at point 4 of Annex XVI to the EEA Agreement laying down the procedures for the award of public contracts in the utilities sector (Directive 2014/25/EU of the European Parliament and of the Council of 26 February 2014 on procurement by entities operating in the water, energy, transport and postal services sectors and repealing Directive 2004/17/EC (1) (‘the Directive’)), and in particular Articles 34 and 35 thereof,
Having regard to the Agreement between the EFTA States on the Establishment of a Surveillance Authority and a Court of Justice (‘the Surveillance and Court Agreement’), in particular Articles 1 and 3 of Protocol 1 thereto,
After consulting the EFTA Procurement Committee,
Whereas:
1. FACTS
(1) |
On 27 November 2018, following pre-notification discussions, the EFTA Surveillance Authority (‘the Authority’) received a request from Nettbuss AS, now Vy Buss AS (‘the Applicant’) pursuant to Article 35(1) of Directive 2014/25/EU (‘the Request’) (2). |
(2) |
The Request concerns the operation of public bus transport services in Norway. Public transport management activities carried out, in practice, by public transport authorities are not covered by the Request (3). |
(3) |
The Applicant is a ‘public undertaking’ within the meaning of the Directive as the Norwegian Ministry of Transport and Communications indirectly holds 100 % of its subscribed capital, through its ownership of NSB AS, now Vygruppen AS (a transportation group of which the Applicant forms part) (4). |
(4) |
The Applicant pursues one of the activities falling under the Directive and is therefore a ‘contracting entity’ within the meaning of the Directive. |
(5) |
Pursuant to Section 2-9 of the Norwegian Regulation of 12 August 2016 No 975 on procurement by entities operating in the water, energy, transport and postal services sectors (5), contracting entities may submit requests under Article 35 of the Directive. |
(6) |
The Request was accompanied by a reasoned and substantiated position adopted by the Norwegian Competition Authority on 29 June 2018, concluding that the Applicant was directly exposed to competition in its provision of public bus transportation services, and that access to the market for the award of contracts to operate public bus transportation services in Norway was unrestricted (6). |
(7) |
The Authority informed Norway of its receipt of the Request on 30 November 2018 (7). |
(8) |
In accordance with point 1 of Annex IV to Directive 2014/25/EU, the Authority has 130 working days to adopt a decision on the Request, with a deadline of 18 June 2019 (8). |
(9) |
Pursuant to Delegated Decision No 37/19/COL of 23 April 2019 (9), the Authority asked the EFTA Procurement Committee to provide its opinion under the advisory procedure set out in Article 2 of Standing Committee Decision No 3/2012 (10). |
(10) |
The EFTA Procurement Committee delivered a positive opinion by unanimous vote on the Authority’s draft decision under the written procedure on 22 May 2019 (11). |
2. LEGAL FRAMEWORK
(11) |
The Directive applies, inter alia, to the award of contracts for the pursuit of activities related to the provision or operation of networks providing a service to the public in the field of transport by bus (12). |
(12) |
Pursuant to the second paragraph of Article 11 of the Directive, a network is considered to exist where the service is provided under operating conditions laid down by a competent authority of a State, such as conditions on the routes to be served, the capacity to be made available, or the frequency of the service. |
(13) |
In SJ (13), in interpreting Article 5(1) of Directive 2004/17/EC of the European Parliament and of the Council (14) (the wording of which is identical to Article 11 of the Directive), in the context of railway networks, the Court of Justice stated that ‘… it must be held that the activity of the “operation of networks” refers to the exercise of the right to use of the railway network for the provision of transport services, while the activity of “provision of networks” refers to the management of the network’ (15). The Court concluded that ‘[t]he first subparagraph of Article 5(1) of Directive 2004/17 must be interpreted as meaning that the activity pursued by a railway undertaking, which consists of providing transport services to the public in exercising a right of use of the railway network, is an “operation of networks” for the purposes of that directive’ (16). The ‘operation of public bus transport services’ in Norway is the equivalent in the field of transport by bus to the activity pursued by a railway undertaking referred to in SJ in the field of transport by railway, thus is an activity to which the Directive applies. |
(14) |
Article 34 of the Directive provides that contracts intended to enable the performance of one of the activities to which the Directive applies are not to be subject to the Directive if, in the State in which it is carried out, the activity is directly exposed to competition on markets to which access is not restricted. Direct exposure to competition is assessed on the basis of objective criteria, taking account of the specific characteristics of the sector concerned. |
(15) |
Article 35 of the Directive sets out the procedure for establishing whether the exemption in Article 34 is applicable. As adapted, it provides that a State or, where the legislation of the State concerned provides for it, a contracting entity may submit a request to the Authority to establish that the Directive does not apply to the award of contracts or the organisation of design contests for the pursuit of the activity in issue. The Authority is to take a decision on whether the activity is directly exposed to competition on markets to which access is not restricted (on the basis of the criteria set out in Article 34). |
(16) |
This decision is without prejudice to the application of the rules on competition (17) and other fields of EEA law. In particular, the criteria and the methodology used to assess direct exposure to competition under Article 34 of Directive 2014/25/EU are not necessarily identical to those used to perform an assessment under Article 53 or 54 of the EEA Agreement or Council Regulation (EC) No 139/2004 (18), as adapted to the EEA Agreement (19). |
(17) |
The aim of the present decision is to establish whether the activity concerned by the Request is exposed to a level of competition (in markets to which access is not restricted within the meaning of Article 34 of the Directive) which will ensure that, also in the absence of the discipline brought about by the detailed procurement rules set out in the Directive, procurement for the pursuit of the activity concerned will be carried out in a transparent, non-discriminatory manner based on criteria allowing purchasers to identify the solution which overall is the economically most advantageous. |
3. ASSESSMENT
3.1. Free access to the market
(18) |
In the present case, the relevant activity is the operation of public bus transport services. This activity is performed under contracts awarded by public transport authorities (PTAs). In Norway, different types of bus services exist (see recital 41 below) and the relevant activity is referred to at a national level as the operation of scheduled bus transport services. |
(19) |
As regards the operation of public bus transport services, there is no relevant EEA legislation on the basis of which free access to the market can be presumed pursuant to Article 34(3) of the Directive. It is therefore necessary to make the relevant assessment based on the regulatory framework and the practice of PTAs, which should demonstrate that access to the market is free de facto and de jure. |
(20) |
It should be kept in mind that the aim of the present decision is to establish whether the activity concerned by the Request is exposed to a level of competition (in markets to which access is not restricted within the meaning of Article 34 of the Directive) which will ensure that, also in the absence of the discipline brought about by the detailed procurement rules set out in the Directive, procurement for the pursuit of the activity concerned will be carried out in a transparent, non-discriminatory manner based on criteria allowing purchasers to identify the solution which overall is the economically most advantageous. The assessment undertaken for these purposes does not entail reviewing whether each individual contract for the operation of public bus transport services has been awarded in full compliance with EEA law but rather whether the regulatory framework and/or practice of PTAs restricts access to the market de facto or de jure. |
(21) |
With regard to potential legal restrictions regarding access to the market of operating public bus transport services, the Authority notes that there are licence requirements and that services are performed under contract. However, in the Request, the Applicant took the view that the licence requirements could not amount to a restriction of access to the market (20) and, moreover, that there were no special or exclusive rights attached to the licences (21). The Applicant further stated that tenders comply with Regulation (EC) No 1370/2007 of the European Parliament and of the Council (22) and the Directive and therefore do not, de jure or de facto, restrict market access (23). |
(22) |
It is settled case-law that a system of prior authorisation cannot legitimise discretionary decisions taken by the national authorities which are liable to negate the effectiveness of provisions of EEA law (24). In order for a system of prior authorisation to be justified even though it derogates from the fundamental freedom to provide services, it must be based on objective, non-discriminatory criteria which are known in advance, in such a way as to circumscribe the exercise of the national authorities’ discretion, so that it is not used arbitrarily (25). |
(23) |
Scheduled bus transport services in Norway are governed by the Act of 21 June 2002 No 45 on Occupational Transport by Motor Vehicle or Vessel (26) (‘the Occupational Transport Act’) and the Regulation on Occupational Transport adopted on the basis of that act (27). |
(24) |
Section 4 of the Occupational Transport Act requires companies intending to operate public bus transport services to obtain a general licence (‘transportløyve’), issued by the Norwegian Public Roads Administration (Statens vegvesen) (28). Whilst the wording of the Occupational Transport Act suggests a possibility for discretion on the part of the Public Roads Administration since it uses the word ‘may’, it is common in Norwegian law to use this word even though in practice there is little or no discretion. It follows from the preparatory works of the act that the licence scheme is a tool to control the quality of the provided services (29). Section 4 of the Regulation on Occupational Transport clarifies that if particular reasons do not weigh against it, a licence may be given to an applicant that fulfils the requirements. Furthermore, the Norwegian Competition Authority has stated that anyone who meets the objective conditions is given such a licence (30). The Authority has received no information that would contradict the above findings. |
(25) |
In addition, for the operation of scheduled bus transport services, a licence under Section 6(1) of the Occupational Transport Act, issued by the relevant county municipalities, is generally required (31). Management companies are exempt from the requirement for a licence and where the PTA is a management company and remains responsible vis-à-vis the public and the operator acts as its subcontractor, no licence is required as the management company’s exemption also applies to the operator (32). |
(26) |
Section 8 of the Occupational Transport Act provides that licences for transport services subject to compensation payments or to an exclusive right shall be awarded in competitive tenders if mandated by the Occupational Transport Act, the Public Procurement Act, or relevant regulations adopted on the basis of either of these acts. Where a licence under Section 6 is required, it is awarded to the winner of the contract (33). |
(27) |
In practice, public bus transport services falling under the Directive are performed under contracts awarded by PTAs. These contracts are subject to EEA public procurement rules, specifically (34):
|
(28) |
Directives 2014/24/EU and 2014/25/EU entered into force in the EEA on 1 January 2017. Prior to this, Directive 2004/17/EC and Directive 2004/18/EC of the European Parliament and of the Council (36) were applicable. |
(29) |
All three current instruments generally require open, transparent, non-discriminatory competitive tendering with limited exceptions. Thus, contracts and licences for scheduled public bus transport services must be awarded by way of competitive tendering procedures unless an exemption under the relevant EEA act applies or the contract falls below the threshold values for application of the relevant act. The same applied under the previous directives. |
(30) |
According to the Request, PTAs have increasingly used competitive tendering in the award of contracted bus services. While only 43 percent of contracted regular bus services were awarded by competitive tendering in 2010, in 2018 that share had increased to more than 98 percent and will be close to 100 percent by 3 December 2019 (37). The Applicant further stated that derogations from competitive tendering are rarely used, no PTAs provide public bus transport services themselves under the exception in Article 5(2) of Regulation (EC) No 1370/2007 and direct awards below the thresholds in Article 5(4) of Regulation (EC) No 1370/2007 are used to a very limited extent. |
(31) |
The Authority compared the information provided by the Applicant in relation to the situation in 2018 against information received by the Authority from the Norwegian Government on 9 November 2018 (38) in the context of a general examination of public service obligation contracts on the basis of Regulation (EC) No 1370/2007 (39). That assessment broadly confirmed the information provided by the Applicant. The Norwegian Government provided details of a total of 27 directly awarded contracts, of which 13 were due to be replaced in the course of 2019 with contracts which had already been subject to tendering. The total annual value of directly awarded contracts was specified to be around NOK 275 million, which amounts to only a fraction of the entire value of public service obligation contracts in public road transport in Norway (estimated to be NOK 11,6 billion in 2017). Furthermore, the only directly awarded contracts anticipated to remain in force after 10 August 2019 are contracts fulfilling the conditions of Article 5(4) of Regulation (EC) No 1370/2007 (which allows for direct awards of contracts under certain value or distance thresholds). |
(32) |
An examination of the legal provisions applicable to awarding contracts and issuing licences for operating public bus transport services in Norway shows that such contracts and licences are currently granted on a non-discriminatory basis. The procedures for granting licences and awarding contracts, and the relevant criteria are the same for all market operators, therefore, this cannot amount to a restriction of access to the market for the purposes of this Decision. |
(33) |
The free access to this activity was also confirmed by the Norwegian Competition Authority (40). |
(34) |
The Authority concludes that the activity of the operation of public bus transport services in Norway is overwhelmingly organised on the basis of public tenders, where there is also a sufficient number of bidders with 3,8 bidders on average (41). Participation in these tenders is possible in a non-discriminatory way. |
(35) |
In view of the above, for the purposes of evaluating the conditions laid down in Article 34 of Directive 2014/25/EU and without prejudice to the application of competition law, the ability of the Authority to investigate Norway’s compliance with Regulation (EC) No 1370/2007, Directive 2014/24/EU, Directive 2014/25/EU or any other provision of EEA public procurement law in the context of its general surveillance duties, or the application of any other field of EEA law, the access to the market for the activity of the operation of public bus transport services can be considered free de facto and de jure. |
3.2. Direct exposure to competition
(36) |
To assess whether or not the second condition for exemption is met, namely that the activity covered by the Request, and which satisfies the condition of free access to the market de jure and de facto, is directly exposed to competition, the relevant product and respective geographic market is defined, and on that basis, a market analysis is performed. |
(37) |
Direct exposure to competition should be evaluated on the basis of various indicators, none of which are, per se, decisive. In respect of the markets concerned by this decision, the market share of the main players on a given market constitutes one criterion, which should be taken into account. Given the characteristics of the markets concerned as bidding markets, further criteria should also be taken into account such as bidding patterns or the ability and willingness of market players to submit bids in current and future tender procedures. |
(38) |
The present decision aims to establish whether the services concerned by the Request are exposed (in markets to which access is not restricted within the meaning of Article 34 of the Directive) to a level of competition ensuring that, also in the absence of the discipline brought about by the detailed procurement rules set out in the Directive, procurement for the pursuit of the activities concerned will be carried out in a transparent, non-discriminatory manner based on criteria allowing purchasers to identify the solution which overall is the economically most advantageous one. |
(39) |
In this context, it is important to keep in mind that, in the market concerned, not all market players are subject to the public procurement rules (42). Therefore, the companies that are not subject to those rules, when acting on those markets, have, in principle, the possibility to bring competitive pressure to bear on those other market players that are subject to public procurement rules. |
(40) |
The Authority must determine whether the activities concerned are directly exposed to competition. To this end, it has examined the evidence provided by the Applicant as well as information provided by the Norwegian Competition Authority. The Authority has relied primarily on the market data provided by the Applicant and the Norwegian Competition Authority to assess market shares and concentration levels. In addition to the information provided by the Applicant, the Norwegian Competition Authority also relied on information from other bus operating companies in Norway and from nine PTAs (43). |
3.2.1. Product market definition
(41) |
In the Request, the Applicant defined the relevant product market as the market for the award of contracts to operate public bus transport services (44). The Applicant also set out its view that commercial long-distance bus services (such as express bus services), commercial short-distance services (such as airport express services) and touring coach services differ from contracted public bus transport services (45). Commercial bus services are governed only by the need of the market, and do not receive funding from state resources. All commercial bus services compete in the market on price, capacity, frequency or other service features. In contrast, the competition between public bus operators takes place at the level of the competitive tender procedures, namely the market for the award of contracts to operate public bus transport services, and not afterwards in the market on price, capacity, frequency or other service features. The Applicant described that accordingly, bus operators operating under a contract with a PTA usually have very little influence on basic parameters of competition for passengers, such as frequency, including timetables, fares or comfort of passengers as these features are usually determined by the awarding PTA (46). |
(42) |
In the view of the Applicant, the different requirements of PTAs are not specific enough to conclude on separate product markets for the award of contracts to operate public bus transport services (47). In order to be awarded a contract to operate on the municipal or regional level, the bus operators have in principle to follow the same regulatory framework and can adapt their offer to the requirements of the respective PTA. According to the Applicant, the major bus operators’ actual bidding patterns demonstrate such bus operators’ ability and willingness to adapt their offers to the individual requirements laid down by the different PTAs, as these operators generally compete for all contracts subject to public tenders in Norway, regardless of any differences between them (48). |
(43) |
The Norwegian Competition Authority considered that the relevant product market suggested by the Applicant was in accordance with established industry practice in Norway and proceeded with its assessment based on this definition proposed by the Applicant (49). |
(44) |
The Commission has held in previous decisions concerning public transport (including bus services) that specific markets for the award of contracts to operate public bus services can be identified (50). The Commission also held that within concessionary (contracted) public bus services no distinction could be made between urban, inter-urban and long-distance contracted services, as they are usually regulated by the same regulatory framework and the requirements of PTAs had only a few distinct features that related to technical specifications (51). |
(45) |
The Commission’s practice also confirms the view that commercial bus services and (contracted) public bus services are part of different product markets due to the difference in the nature of competition. Competition between public bus operators takes place at the level of bidding for contracts, namely the market for the award of contracts to operate public transport bus services, and not afterwards in the market on price, capacity, frequency or other service features (52). Compared to commercial services, (contracted) public bus operators usually have very little influence on basic dimensions of competition such as frequencies, fares or the comfort of passengers as those features are set by the PTAs awarding the contract to provide the service. Bus operators are obliged to provide their services according to the contract with the PTA and they cannot adapt their services according to the need from passengers as commercial operators would normally do (53). |
(46) |
Taking into account specificities of the Norwegian bus market as referred to in recitals 41 to 42, for the purposes of evaluating the conditions laid down in Article 34 of Directive 2014/25/EU, and without prejudice to the application of competition law, the relevant product market is hereby defined as the market for the award of contracts to operate public bus transport services. The Authority has not identified in this specific case, and for the purposes referred to above, any circumstances that would justify determining the separate tenders of PTAs as separate relevant markets. |
3.2.2. Geographic market definition
(47) |
As to the geographic market, the Applicant considered that the relevant market for the award of contracts to operate public bus transport services is at least national in scope, covering all contracted bus services in Norway (54). The Applicant argued that the Professional Transport Act provides a common regulatory framework for competitive tendering of bus services throughout Norway (55). The Applicant also noted that virtually all (98 percent of) ongoing contracts for public bus transport services have been awarded after competitive tendering, and most are operated as gross contracts, sharing the same main characteristics (56). Accordingly, any difference in the tendering procedures and contracts of different PTAs are minor and easy to overcome for bus operating companies. |
(48) |
The Applicant emphasised that the existence of a common regulatory framework for competitive tendering of bus services throughout Norway is also reflected in the actual bidding pattern of bus operating companies currently active in the market (57). Bus operators Torghatten, Boreal and Nobina operate nationwide, and there is nothing preventing other bus operating companies from competing for all contracts. The Applicant asserted that with few exceptions, there has been considerable competition for all contracted bus services awarded since 1 January 2015 irrespective of any existing regional presence (58). |
(49) |
However, the Applicant concluded that for the purpose of the Request, the precise geographic market definition could ultimately be left open (59). In its view, under any potential geographic market definition where the Applicant has ongoing contracts and/or bids for contracts, access to the market is unrestricted and fully exposed to competition. |
(50) |
The Norwegian Competition Authority found that the precise definition of the relevant geographic market could be left open as the result of the analysis remained the same regardless of whether it was based on a narrow or broad market definition (60). |
(51) |
The Applicant’s position is in line with the Commission practice. In previous decisions, the Commission, while most often leaving the exact geographic market definition open, considered the relevant geographic market for the award of contracts to operate public bus transport services to be an area in which there is a common regulatory framework for competitive tendering of bus services (61). |
(52) |
To conclude, for the purposes of evaluating the conditions laid down in Article 34 of the Directive, and without prejudice to the application of competition law or any other field of EEA law, the Authority considers that the relevant geographical dimension of the relevant product market is at least national in scope. This is because of the existence of a common regulatory framework, only minor differences in the tendering procedures of PTAs and the ability and willingness of bus operators to participate in award procedures all over Norway. |
3.2.3. Market analysis
(53) |
It is considered that in respect of the market for the award of public contracts to operate public bus transport services, one indicator for the degree of competition is the market share of the biggest operator and the total market share of the most important operators in the market. According to the data submitted by the Applicant in its Request, it has the biggest market share in the relevant market with [25-30 %] based on turnover and 28 % based on volume (62). However, there are several strong competitors with double-digit market shares based on turnover, such as Torghatten [15-20%], Tide [15-20 %] or Unibuss [12-17 %], followed by smaller but still not insignificant market players, such as Boreal [5-10 %] and Nobina [5-10 %] (63). The remaining market share is split between 29 smaller bus operators. The market share figures provided by the Applicant are in line with the calculations made by the Norwegian Competition Authority (64). |
(54) |
As explained in recital 45 above, the nature of competition is different in the case of public bus transport services, as companies are competing for the market and not in the market based on price, schedules or service quality. On the Norwegian market for the award of contracts to operate public bus transport services, competition for the award of contracts takes place in the form of public tenders organised by PTAs. According to the Applicant, 98 % of all ongoing contracts have been awarded through competitive tendering, and this figure will be close to 100 % by 3 December 2019 (65). Given these circumstances, the competitive assessment and market analysis has to examine bidding patterns and market players’ ability and willingness to compete in current and upcoming tenders. |
(55) |
The most important competitors of the Applicant are large companies often forming part of transportation companies with multinational operations. Torghatten is one of the largest transportation companies in Norway and the provider of public transportation by ferry, express boat, bus and air transport. It also operates commercial bus services and has an overall consolidated revenue of more than NOK 9 billion. Tide forms part of the transportation group DSD, operating both public and commercial bus services in Norway and with a presence also in Denmark. The consolidated revenue of the DSD group is almost NOK 6 billion. Unibuss is owned by the municipality of Oslo. The Unibuss group offers both public and commercial services in several Norwegian cities. Boreal Buss is part of the Boreal Group with extensive transport operations both in public and commercial form. Boreal’s current final owner is a private equity fund from Hong Kong targeting infrastructure investment opportunities globally. Boreal’s consolidated revenue is almost NOK 3 billion. Finally, Nobina forms part of the Swedish Nobina group that provides public transport services all over Scandinavia. These companies participate in tender procedures all over Norway, they have the capabilities and experience to submit bids in any Norwegian tender procedure. |
(56) |
The Applicant has observed that from 1 January 2015, in the 58 competitive tenders in Norway, there were on average 3,8 competitors submitting bids (66). This figure has been confirmed by the estimations prepared by the Norwegian Competition Authority (67). While the number of providers varies greatly between the different contracts, from one to eight in the 46 contracts the Norwegian Competition Authority looked at, the Norwegian Competition Authority also found that PTAs are generally satisfied with respect to the number of providers (68). The Applicant also provided detailed information on tender procedures in the various regions of Norwegian PTAs confirming the general competitive nature of awarding public bus transport contracts in Norway (69). The detailed data and the Applicant’s internal data also showed that there was a change of operator in approximately 40 % of all contracts subject to competitive tendering (70). This confirms the ability of different operators to compete efficiently. |
(57) |
The Applicant also argued that the market for the award of public bus transport services in Norway is characterised by low barriers to entry and expansion and the Norwegian Competition Authority’s assessment confirmed this finding (71). This finding was based on a stable and predictable income through the contracts with the PTAs, and easy access to necessary information and infrastructure as the PTAs provide the necessary infrastructure except buses (72). In addition, employees of the former holder of the relevant contract have the right to transfer to the new holder of the contract. Also, as tender specifications of PTAs normally require a new fleet of buses, therefore potential new operators do not enjoy any significant cost disadvantage with respect to acquisition of buses (73). |
(58) |
For the purposes of this Decision and without prejudice to the application of competition law, the factors listed in recitals 53 to 57 should be taken as an indication of exposure to competition of the operation of public bus transport in Norway. This is also in line with the opinion of the Norwegian Competition Authority. It is likely that companies active in this market are subject to sufficient competitive pressure. There is nothing to indicate that the sector is not functioning in a market-driven fashion. The Authority therefore concludes that the market for the award of public contracts to operate public bus transport services is directly exposed to competition within the meaning of the Directive. |
(59) |
The Authority takes note of the fact that the current competitive pressure in the market for the award of contracts to operate public bus transport services is essentially driven by the regulatory framework in place and PTAs organising competitive tenders, rather than providing services in-house or using the exceptions for direct award provided by the relevant EEA public procurement rules, other than limited use of direct awards for low value and/or low distance contracts. This means that changes to those policies or practices may modify the market dynamics and the overall competitive pressure on contracting entities pursuing the activity of the operation of public bus transport services concerned by this decision. |
4. CONCLUSIONS
(60) |
For the purposes of this decision and without prejudice to the application of competition law, the findings of the market analysis listed in recitals 53 to 57 should be taken as an indication of exposure to competition within the meaning of Article 34 of the Directive of the activity of the operation of public bus transport services in Norway. Consequently, since the conditions set out in Article 34 of Directive 2014/25/EU are met, it should be established that Directive 2014/25/EU does not apply to contracts intended to enable the pursuit of this activity in Norway. |
(61) |
This decision is based on the applicable law and the factual situation between January 2015 and June 2019, as it appears from the information submitted by the Applicant and by the Norwegian Competition Authority. The Authority reserves the right to revise the present decision, should the conditions for the applicability of Article 34 of Directive 2014/25/EU be no longer met, or following significant changes in the legal or factual situation, |
HAS ADOPTED THIS DECISION:
1. |
The Act referred to at point 4 of Annex XVI to the EEA Agreement laying down the procedures for the award of public contracts in the utilities sector (Directive 2014/25/EU shall not apply to contracts awarded or design contests organised by contracting entities pursuing or having as one of their activities the operation of public bus transport services where such contracts or design contests are intended to enable them to carry out the operation of public bus transport services in Norway (such activity relating to the operation of a network providing a service to the public in the field of transport by bus). |
2. |
This Decision is addressed to the Kingdom of Norway. |
3. |
This Decision shall be authentic in the English language. |
Done at Brussels, 17 June 2019.
For the EFTA Surveillance Authority, acting under Delegation Decision No 19/19/COL
Högni S. KRISTJÁNSSON
Responsible College Member
Carsten ZATSCHLER
Countersigning as Director,
Legal and Executive Affairs
(1) OJ L 94 28.3.2014, p. 243. Incorporated into the EEA Agreement by Joint Committee Decision No 97/2016 (OJ L 300, 16.11.2017, p. 49 and EEA Supplement No 73, 16.11.2017, p. 53).
(2) Document No 1040381.
(3) So, for example, the award by a municipality of a contract to operate bus services to a bus operator would not be covered by the present Request. By contrast, a contract awarded by that operator to (for example) a cleaning company for the cleaning of buses or to a company providing buses for use by the operator, would fall within the scope of the Request. This distinction has been clarified by the CJEU in Case C-388/17, SJ, EU:C:2019:161 (‘ SJ ’), paragraph 53 (see further recital 31 below). The Authority will in the present decision refer to the concept of an ‘activity’ as set out in Directive 2014/25/EU.
(4) Page 3 of the Request.
(5) Forskrift om innkjøpsregler i forsyningssektorene (forsyningsforskriften)
https://lovdata.no/dokument/SF/forskrift/2016-08-12-975.
(6) Document No 1040380.
(7) Document No 935075.
(8) Pursuant to Regulation (EEC, EURATOM) No 1182/71 of the Council of 3 June 1971 determining the rules applicable to periods, dates and time limits (OJ L 124, 8.6.1971, p. 1), public holidays are excluded from the time period. See Public holidays in 2018 and 2019: EEA EFTA States and EEA institutions, OJ C 429, 14.12.2017, p. 25 and EEA Supplement No 81, 14.12.2017, p. 1 and OJ C 422, 22.11.2018, p. 7 and EEA Supplement No 77, 22.11.2018, p. 1.
(9) Document No 1056012.
(10) In accordance with Article 4 of Regulation (EU) No 182/2011 of the European Parliament and of the Council of 16 February 2011 laying down the rules and general principles concerning mechanisms for control by Member States of the Commission’s exercise of implementing powers (OJ L 55, 28.2.2011, p. 13), as adapted.
(11) See Document No 1070910 on the outcome of the written procedure.
(12) Article 11 of the Directive.
(13) Cited at footnote 3 above.
(14) Directive 2004/17/EC of the European Parliament and of the Council of 31 March 2004 coordinating the procurement procedures of entities operating in the water, energy, transport and postal services sectors (OJ L 134, 30.4.2004, p. 1), incorporated into the EEA Agreement by Joint Committee Decision No 68/2006 (OJ L 245, 7.9.2006, p. 22 and EEA Supplement No 44, 7.9.2006, p. 18).
(15) SJ, paragraph 53 of the judgment.
(16) SJ, paragraph 54 and paragraph 2 of the operative part of the judgment.
(17) Article 34(1) of the Directive. See also Recital 44 of the Directive.
(18) Council Regulation (EC) No 139/2004 of 20 January 2004 on the control of concentrations between undertakings (the EC Merger Regulation) (OJ L 24, 29.1.2004, p. 1).
(19) See judgment in Österreichische Post AG v Commission, T-463/14, EU:T:2016:243, paragraph 28.
(20) See, for example, page 40 of the Request.
(21) Page 11 of the Request.
(22) Regulation (EC) No 1370/2007 of the European Parliament and of the Council of 23 October 2007 on public passenger transport services by rail and by road and repealing Council Regulations (EEC) Nos 1191/69 and 1107/70 (OJ L 315, 3.12.2007, p. 1) and incorporated into the EEA Agreement by Joint Committee Decision No 85/2008 (OJ L 280, 23.10.2008, p. 20 and EEA Supplement No 64, 23.10.2008, p. 13).
(23) Page 30 of the Request.
(24) Judgments in Smits and Peerbooms, C-157/99, EU:C:2001:404, paragraph 90; Müller-Fauré and van Riet, C-385/99, EU:C:2003:270, paragraph 84; Watts, C-372/04, EU:C:2006:325, paragraph 115; Opinion of the Advocate General in Watts, C-372/04, EU:C:2005:784, paragraph 70.
(25) Judgments in Analir and Others, C-205/99, EU:C:2001:107, paragraph 38; Watts, C-372/04, EU:C:2006:325 paragraph 116.
(26) Yrkestransportloven.
(27) Regulation on Occupational Transport of 26 March 2003 No 401 (‘yrkestransportforskriften’).
(28) The Occupational Transport Act, Section 4, and the Regulation on Occupational Transport, Section 3.
(29) Ot.prp. nr. 74 (2001-2002) chapter 2.
(30) Page 4 of the Position adopted by the Norwegian Competition Authority on the conditions for the applicability of Article 34(1) of Directive 2014/25/EU.
(31) The Occupational Transport Act, Section 6, and the Regulation on Occupational Transport, Section 3.
(32) The Occupational Transport Act, Section 6(2).
(33) Page 4 of the Position adopted by the Norwegian Competition Authority on the conditions for the applicability of Article 34(1) of Directive 2014/25/EU.
(34) Which instrument applies is dependent on, inter alia, the nature of the contract awarded and whether the conditions of Article 11 of Directive 2014/25/EU regarding the provision or operation of a network are met. The Applicant has stated that PTAs generally follow Directive 2014/25/EU when awarding contracts for the operation of public bus transport services, however, some PTAs have awarded contracts under Directive 2014/24/EU and the tendering requirements under Regulation (EC) No 1370/2007 may apply to some contracts.
(35) Directive 2014/24/EU of the European Parliament and of the Council of 26 February 2014 on public procurement and repealing Directive 2004/18/EC (OJ L 94, 28.3.2014, p. 65) and incorporated into the EEA Agreement by Joint Committee Decision No 97/2016 (OJ L 300, 16.11.2017, p. 49 and EEA Supplement No 73, 16.11.2017, p. 53).
(36) Directive 2004/18/EC of the European Parliament and of the Council of 31 March 2004 on the coordination of procedures for the award of public works contracts, public supply contracts and public service contracts (OJ L 134, 30.4.2004, p. 114), incorporated into the EEA Agreement by Joint Committee Decision No 68/2006 (OJ L 245, 7.9.2006, p. 22 and EEA Supplement No 44, 7.9.2006, p. 18).
(37) Page 6 of the Request.
(38) Document No 1037921, letter from the Norwegian Government dated 9 November 2018.
(39) Case No 74680, Examination of Public Service Obligation contracts on the basis of Regulation (EC) No 1370/2007.
(40) Page 4 of the Position adopted by the Norwegian Competition Authority on the conditions for the applicability of Article 34(1) of Directive 2014/25/EU.
(41) See Page 14 of the Request.
(42) Besides the Applicant, also Unibuss AS is subject to public procurement rules. Other operators such as Torghatten ASA, Tide AS, Boreal Bus AS or Nobina Norge AS are private operators which do not appear to fulfil the conditions to be bound by EEA public procurement rules.
(43) Page 3 of the Position adopted by the Norwegian Competition Authority on the conditions for the applicability of Article 34(1) of Directive 2014/25/EU.
(44) Page 25 of the Request.
(45) Page 26 of the Request.
(46) Ibid.
(47) Ibid.
(48) Ibid.
(49) Page 3 of the Position adopted by the Norwegian Competition Authority on the conditions for the applicability of Article 34(1) of Directive 2014/25/EU.
(50) See in this regard case COMP/M.1768 — Schoyens/Goldman Sachs/Swebus, paragraphs 10 and 14; case COMP/M.5557 — SNCF-P/CDPQ/Keolis/EFFIA, paragraphs 16-23; case COMP/M.5855 — DB/Arriva, paragraph 21; case COMP/M.6794 — Caisse des Depots et Consignations/Veolia Transdev, paragraphs 19-21; case COMP/M.6818 — DB/Veolia, paragraphs 19 and 56.
(51) Case COMP/M.6818 — DB/Veolia, paragraphs 19-21; case COMP/M.5855 — DB/Arriva, paragraphs 23-24.
(52) Case COMP/M.5557 — SNCF-P/CDPQ/Keolis/EFFIA, paragraph 17; case COMP/M.6818 — DB/Veolia, paragraphs 22 and 58; case COMP/M.5855 — DB/Arriva, paragraph 22.
(53) Case COMP/M.6818 — DB/Veolia, paragraph 23; case COMP/M.5855 — DB/Arriva, paragraph 22.
(54) Page 28 of the Request.
(55) Ibid.
(56) Ibid.
(57) Ibid.
(58) Ibid.
(59) Page 29 of the Request.
(60) Page 3 of the Position adopted by the Norwegian Competition Authority on the conditions for the applicability of Article 34(1) of Directive 2014/25/EU.
(61) Case COMP/M.6818 — DB/Veolia, paragraph 29; case COMP/M.5855 — DB/Arriva, paragraph 27. See also case COMP/M.5557 — SNCF-P/CDPQ/Keolis/EFFIA and case COMP/M.6794 — Caisse des Depots et Consignations/Veolia Transdev paragraph 31.
(62) Page 30 of the Request.
(63) Ibid.
(64) Page 5 of the Position adopted by the Norwegian Competition Authority on the conditions for the applicability of Article 34(1) of Directive 2014/25/EU.
(65) Page 6 of the Request. See also the Authority’s procedure mentioned in recital 31 above.
(66) Page 14 of the Request.
(67) Page 5 of the Position adopted by the Norwegian Competition Authority on the conditions for the applicability of Article 34(1) of Directive 2014/25/EU.
(68) Ibid.
(69) See pages 14 to 24 of the Request.
(70) Page 24 of the Request.
(71) Page 31 of the Request and page 5 of the Position adopted by the Norwegian Competition Authority on the conditions for the applicability of Article 34(1) of Directive 2014/25/EU.
(72) Ibid.
(73) Page 31 of the Request.
Corrigenda
10.10.2019 |
EN |
Official Journal of the European Union |
L 259/86 |
Corrigendum to Commission Implementing Regulation (EU) 2019/1688 of 8 October 2019 imposing a definitive anti-dumping duty and definitively collecting the provisional duty imposed on imports of mixtures of urea and ammonium nitrate originating in Russia, Trinidad and Tobago and the United States of America
(Official Journal of the European Union L 258 of 9 October 2019)
On page 62, recital 301:
for:
‘(301) |
The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 15(1) of the basic Regulation,’, |
read:
‘(301) |
The Committee established by Article 15(1) of Regulation (EU) 2016/1036 did not deliver an opinion,’. |