25.2.2006

Official Journal of the European Union

L 56/1

COUNCIL REGULATION (EC) No 300/2006

of 30 January 2006

amending Regulation (EC) No 1255/96 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty establishing the European Community, and in particular Article 26 thereof,

Having regard to the proposal from the Commission,

Whereas:

(1)	It is in the interest of the Community to suspend partially or totally the autonomous Common Customs Tariff duties for a number of new products not listed in the Annex to Council Regulation (EC) No 1255/96 (1).

(2)

A number of products which are referred to in the said Regulation should be withdrawn from the list in the Annex because it is no longer in the Community's interest to maintain suspension of autonomous Common Customs Tariff duties or because the description needs to be altered in order to take account of technical product developments and economic trends on the market.

(3)	Accordingly, products whose description needs to be altered should be regarded as new products.

(4)	For ease of comprehension, in view of the large number of amendments coming into force on 1 January 2006, the Annex to Regulation (EC) No 1255/96 should be replaced by a completely new version with effect from that date.

(5)

The validity period of the measure should be 1 January 2006 to 31 December 2008, in order to be able to carry out economic examinations of the individual suspensions in that period. Eight years of experience have shown the necessity to provide for an expiry date to the suspensions listed in the Annex to this Regulation to ensure account is taken of technological and economic changes. This should not exclude the premature termination of certain measures or their continuation beyond that period, if economic reasons are submitted, in accordance with the principles laid down in the Commission Communication concerning autonomous tariff suspensions and quotas (2).

(6)	Regulation (EC) No 1255/96 should therefore be amended accordingly.

(7)

In view of the economic importance of this Regulation, it is necessary to rely upon the grounds of urgency provided for in point I.3 of the Protocol annexed to the Treaty on European Union and to the Treaties establishing the European Communities on the role of national parliaments in the European Union.

(8)	Since this Regulation is to apply from 1 January 2006, it should enter into force immediately,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EC) No 1255/96 shall be replaced by the Annex to this Regulation.

Article 2

The temporary suspensions of the autonomous duties of the Common Customs Tariff for the products set out in the Annex shall apply from 1 January 2006. They shall expire on 31 December 2008, unless the Council of the European Union decides otherwise.

Article 3

This Regulation shall enter into force on the day following its publication in the Official Journal of the European Union.

It shall apply from 1 January 2006.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 30 January 2006.

For the Council

The President

U. PLASSNIK

(1) OJ L 158, 29.6.1996, p. 1. Regulation as last amended by Regulation (EC) No 989/2005 (OJ L 168, 30.6.2005, p. 1).

(2) OJ C 128, 25.4.1998, p. 2.

ANNEX

‘ANNEX

CN code

TARIC

Description

Rate of autonomous duty

Validity period

ex 0302 69 99

ex 0303 79 98

Sturgeons, fresh, chilled or frozen, for processing (1) (3)

1.1.2006 to 31.12.2008

ex 0302 69 99

Lump fish (Cyclopterus lumpus) with roe, fresh or chilled, for processing (1)

1.1.2006 to 31.12.2008

ex 0302 69 99

ex 0303 79 98

Red snapper (Lutjanus purpureus), fresh, chilled or frozen, for processing (1) (2)

1.1.2006 to 31.12.2008

ex 0302 70 00

ex 0303 80 90

Hard fish roes, fresh, chilled or frozen

1.1.2006 to 31.12.2008

ex 0303 11 00

ex 0303 19 00

Pacific salmon (Oncorhynchus spp.), frozen and headless, for the processing industry for manufacture into pastes or spreads (1)

1.1.2006 to 31.12.2008

ex 0304 10 38

ex 0304 10 98

ex 0304 20 61

ex 0304 90 97

Fillets and meat of dogfish (Squalus acanthias), fresh, chilled or frozen

1.1.2006 to 31.12.2008

ex 0305 20 00

Hard fish roes, salted or in brine

1.1.2006 to 31.12.2008

ex 0306 19 90

ex 0306 29 90

Krill for processing (1)

1.1.2006 to 31.12.2008

ex 0603 90 00

ex 0604 99 90

Flowers, flower buds, foliage, leaves and other parts of plants, not further prepared than dried, dyed or bleached, for use in the manufacture of pot pourri of subheading 3307 49 00 (1)

1.1.2006 to 31.12.2008

ex 0710 21 00

Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness not exceeding 6 mm, to be used, in their pods, in the manufacture of prepared meals (1) (2)

1.1.2006 to 31.12.2008

ex 0710 80 95

Bamboo shoots, frozen, not put up for retail sale

1.1.2006 to 31.12.2008

ex 0712 32 00

ex 0712 33 00

ex 0712 39 00

Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale (1) (2)

1.1.2006 to 31.12.2008

ex 0804 10 00

Dates, fresh or dried, not put up for retail sale

1.1.2006 to 31.12.2008

ex 0810 40 50

Fruit of the species Vaccinium macrocarpon, fresh

1.1.2006 to 31.12.2008

ex 0810 90 95

Rose-hips, fresh

1.1.2006 to 31.12.2008

0811 90 50

0811 90 70

ex 0811 90 95

Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter

1.1.2006 to 31.12.2008

ex 0811 90 95

Boysenberries, frozen, not containing added sugar, not put up for retail sale

1.1.2006 to 31.12.2008

ex 0811 90 95

Pineapple (Ananas comosus), in pieces, frozen

1.1.2006 to 31.12.2008

ex 0811 90 95

Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter

1.1.2006 to 31.12.2008

ex 1511 90 19

ex 1511 90 91

ex 1513 11 10

ex 1513 19 30

ex 1513 21 10

ex 1513 29 30

Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:

—	industrial monocarboxylic fatty acids of subheading 3823 19 10 ,

—	mixtures of methyl esters of fatty acids of subheading 3824 90 99 ,

—	methyl esters of fatty acids of heading 2915 or 2916 ,

—	stearic acid of subheading 3823 11 00 or

—	goods of heading 3401

(1)

1.1.2006 to 31.12.2008

ex 1515 90 99

Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid

1.1.2006 to 31.12.2008

ex 1518 00 91

Soya-bean oil, modified with maleic acid, for the manufacture of cosmetic products (1)

1.1.2006 to 31.12.2008

ex 1604 11 00

ex 1604 20 10

Pacific salmon (Oncorhynchus spp.), for the processing industry for manufacture into pastes or spreads (1)

1.1.2006 to 31.12.2008

ex 1604 30 90

Hard fish roes, washed, cleaned of adherent organs and simply salted or in brine, for processing (1)

1.1.2006 to 31.12.2008

ex 1605 10 00

Crabs of the species “King” (Paralithodes camchaticus), “Hanasaki” (Paralithodes brevipes), “Kegani” (Erimacrus isenbecki), “Queen” and “Snow” (Chionoecetes spp.), “Red” (Geryon quinquedens), “Rough stone” (Neolithodes asperrimus), Lithodes antarctica, “Mud” (Scylla serrata), “Blue” (Portunus spp.), simply boiled in water and shelled, whether or not frozen, in immediate packings of a net content of 2 kg or more

1.1.2006 to 31.12.2008

ex 1605 10 00

Crabs of the species Paralomis granulosa

1.1.2006 to 31.12.2008

ex 1902 30 10

ex 1903 00 00

Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale

1.1.2006 to 31.12.2008

ex 2005 90 80

Bamboo shoots, prepared or preserved, in immediate packings of a net content exceeding 5 kg

1.1.2006 to 31.12.2008

ex 2106 10 20

Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate

1.1.2006 to 31.12.2008

ex 2309 90 99

Calcium sodium phosphate, with a fluorine content of 0,005 % or more but less than 0,2 % by weight on the dry anhydrous product, for use in the manufacture of additives for animal feeding (1)

1.1.2006 to 31.12.2008

ex 2707 99 11

Crude light oils containing by weight:

—	10 % or more of vinyltoluenes,

—	10 % or more of indene and

—	1 % or more but not more than 5 % of naphthalene

1.1.2006 to 31.12.2008

ex 2710 11 25

Mixture of isomers 2,4,4-trimethylpent-1-ene and 2,4,4-trimethylpent-2-ene

1.1.2006 to 31.12.2008

ex 2805 30 10

Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium

1.1.2006 to 31.12.2008

ex 2805 30 10

Alloy of lanthanum and other rare-earth metals, containing by weight 43 % or more of lanthanum

1.1.2006 to 31.12.2008

ex 2805 30 90

Lanthanum of a purity by weight of 99 % or more

1.1.2006 to 31.12.2008

ex 2811 19 80

Sulfamidic acid

1.1.2006 to 31.12.2008

ex 2811 22 00

Silicon dioxide in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)

1.1.2006 to 31.12.2008

ex 2811 29 90

Tellurium dioxide

1.1.2006 to 31.12.2008

ex 2812 90 00

Nitrogen trifluoride

1.1.2006 to 31.12.2008

ex 2812 90 00

Silicon tetrafluoride

1.1.2006 to 31.12.2008

ex 2818 30 00

Aluminium hydroxide oxide in the form of pseudo-boehmite

1.1.2006 to 31.12.2008

ex 2819 90 90

Dichromium trioxide:

—	of a specific surface of 37 m2/g or more (as determined by the BET method),

—	of a purity by weight of 99,5 % or more calculated on the dry substance,

—	of a specific gravity of 1,2 g/cm3 or less,

for the manufacture of magnetic chromium dioxide (1)

1.1.2006 to 31.12.2008

ex 2820 90 90

Manganese (II, III) oxide containing by weight 70 % or more of manganese

1.1.2006 to 31.12.2008

ex 2821 10 00

Diiron trioxide, in the form of powder, of a purity by weight of 99,2 % or more, for the manufacture of goods of heading 8504 (1)

1.1.2006 to 31.12.2008

ex 2823 00 00

Titanium dioxide, of a purity by weight of 99,9 % or more, with an average grain-size of 1,2 μm or more but not exceeding 1,8 μm, for the manufacture of goods of heading 8532 or 8533 (1)

1.1.2006 to 31.12.2008

ex 2825 50 00

Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride

1.1.2006 to 31.12.2008

ex 2826 90 90

Potassium hexafluorophosphate

1.1.2006 to 31.12.2008

ex 2827 39 80

Copper monochloride of a purity by weight of 96 % or more but not exceeding 99 %

1.1.2006 to 31.12.2008

ex 2827 60 00

Titanium tetraiodide

1.1.2006 to 31.12.2008

ex 2830 10 00

Disodium tetrasulfide, containing by weight 38 % or less of sodium calculated on the dry weight

1.1.2006 to 31.12.2008

ex 2830 20 00

Zinc sulfide containing:

—	20,0 mg/kg or less of chloride,

—	0,2 mg/kg or less of copper,

—	0,5 mg/kg or less of iron and

—	1,0 mg/kg or less of lead

1.1.2006 to 31.12.2008

ex 2833 29 90

Manganese sulphate monohydrate

1.1.2006 to 31.12.2008

ex 2836 91 00

Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:

—	2 mg/kg or more of arsenic,

—	200 mg/kg or more of calcium,

—	200 mg/kg or more of chlorides,

—	20 mg/kg or more of iron,

—	150 mg/kg or more of magnesium,

—	20 mg/kg or more of heavy metals,

—	300 mg/kg or more of potassium,

—	300 mg/kg or more of sodium,

—	200 mg/kg or more of sulfates,

determined according to the methods specified in the European Pharmacopœia

1.1.2006 to 31.12.2008

ex 2836 99 18

Zirconium (IV) basic carbonate

1.1.2006 to 31.12.2008

ex 2837 19 00

Zinc cyanide

1.1.2006 to 31.12.2008

ex 2837 19 00

Copper cyanide

1.1.2006 to 31.12.2008

ex 2839 90 00

Lead silicate hydrate, of a lead content by weight of ((84,5 ± 1,5 ) %, evaluated as lead monoxide, in the form of powder

1.1.2006 to 31.12.2008

ex 2839 90 00

Calcium silicate

1.1.2006 to 31.12.2008

ex 2842 90 90

Ammonium sulfamidate

1.1.2006 to 31.12.2008

ex 2843 90 90

Palladium monoxide

1.1.2006 to 31.12.2008

ex 2843 90 90

Mixture of palladium phthalocyanines

1.1.2006 to 31.12.2008

2845 10 00

Heavy water (deuterium oxide) (Euratom)

1.1.2006 to 31.12.2008

2845 90 10

Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)

1.1.2006 to 31.12.2008

ex 2846 10 00

ex 3824 90 99

Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight

1.1.2006 to 31.12.2008

ex 2846 10 00

Dicerium tricarbonate, whether or not hydrated

1.1.2006 to 31.12.2008

ex 2846 10 00

Cerium lanthanum carbonate, whether or not hydrated

1.1.2006 to 31.12.2008

ex 2846 10 00

Cerium lanthanum neodymium praseodymium carbonate, whether or not hydrated

1.1.2006 to 31.12.2008

2846 90 00

Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 00

1.1.2006 to 31.12.2008

ex 2848 00 00

Phosphine

1.1.2006 to 31.12.2008

ex 2850 00 20

Silane

1.1.2006 to 31.12.2008

ex 2850 00 20

Arsine

1.1.2006 to 31.12.2008

ex 2903 30 80

Carbon tetrafluoride (tetrafluoromethane)

1.1.2006 to 31.12.2008

ex 2903 30 80

1,1,1,2,3,3,3-Heptafluoropropane

1.1.2006 to 31.12.2008

ex 2903 30 80

Perfluoroethane

1.1.2006 to 31.12.2008

ex 2903 30 80

1,1-Difluoroethane

1.1.2006 to 31.12.2008

ex 2903 30 80

1,1,1,3,3-Pentafluoropropane

1.1.2006 to 31.12.2008

ex 2903 30 80

Octafluoropropane

1.1.2006 to 31.12.2008

ex 2903 43 00

1,1,1-Trichlorotrifluoroethane

1.1.2006 to 31.12.2008

ex 2903 49 10

Chloro-1,1,1-trifluoroethane

1.1.2006 to 31.12.2008

ex 2903 59 90

1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo= [12.2.1.16 , 9.02 , 13.05 , 10]octadeca-7,15-diene

1.1.2006 to 31.12.2008

ex 2903 59 90

Hexachlorocyclopentadiene

1.1.2006 to 31.12.2008

ex 2903 69 90

Di- or tetrachlorotricyclo[8.2.2.24 , 7]hexadeca-1(12),4,6,10,13,15-hexaene, mixed isomers

1.1.2006 to 31.12.2008

ex 2903 69 90

1,2-Bis(pentabromophenyl)ethane

1.1.2006 to 31.12.2008

ex 2903 69 90

2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing:

—	0,001 mg/kg or less of tetrachlorodibenzodioxines,

—	0,001 mg/kg or less of tetrachlorodibenzofurans,

—	0,2 mg/kg or less of tetrachlorobiphenyls

1.1.2006 to 31.12.2008

ex 2903 69 90

1-(Chloromethyl)naphthalene

1.1.2006 to 31.12.2008

ex 2903 69 90

α-Chloro(ethyl)toluenes

1.1.2006 to 31.12.2008

ex 2904 10 00

Sodium p-styrenesulfonate

1.1.2006 to 31.12.2008

ex 2904 20 00

Nitromethane

1.1.2006 to 31.12.2008

ex 2904 20 00

Nitroethane

1.1.2006 to 31.12.2008

ex 2904 20 00

1-Nitropropane

1.1.2006 to 31.12.2008

ex 2904 20 00

2-Nitropropane

1.1.2006 to 31.12.2008

ex 2904 20 00

2,2'-dinitro-bibenzyl

1.1.2006 to 31.12.2008

ex 2904 90 20

Tosyl chloride

1.1.2006 to 31.12.2008

ex 2904 90 40

Trichloronitromethane, for the manufacture of goods of subheading 3808 20 (1)

1.1.2006 to 31.12.2008

ex 2904 90 85

Quintozene (ISO)

1.1.2006 to 31.12.2008

ex 2904 90 85

1-Chloro-2,4-dinitrobenzene

1.1.2006 to 31.12.2008

ex 2904 90 85

5-Nitro-1,2,4-trichlorobenzene

1.1.2006 to 31.12.2008

ex 2905 19 00

ex 3824 90 99

Potassium tert-butanolate (potassium tert-butoxide), whether or not in the form of a solution in tetrahydrofuran

1.1.2006 to 31.12.2008

ex 2905 19 00

2,6-Dimethylheptan-4-ol

1.1.2006 to 31.12.2008

ex 2905 39 85

Hexa-1,5-diene-3,4-diol

1.1.2006 to 31.12.2008

ex 2905 49 10

Ethylidynetrimethanol

1.1.2006 to 31.12.2008

2906 11 00

Menthol

1.1.2006 to 31.12.2008

ex 2906 19 00

Cyclohex-1,4-ylenedimethanol

1.1.2006 to 31.12.2008

ex 2906 19 00

4,4'-Isopropylidenedicyclohexanol

1.1.2006 to 31.12.2008

ex 2906 29 00

2,2'-(m-Phenylene)dipropan-2-ol

1.1.2006 to 31.12.2008

ex 2906 29 00

1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene

1.1.2006 to 31.12.2008

ex 2907 19 00

2,3,5-Trimethylphenol

1.1.2006 to 31.12.2008

ex 2907 21 00

Resorcinol

1.1.2006 to 31.12.2008

ex 2907 29 00

Disodium 1,4-dihydroanthracene-9,10-diolate, in the form of an aqueous solution

1.1.2006 to 31.12.2008

ex 2907 29 00

4,4'-(3,3,5-Trimethylcyclohexylidene)diphenol

1.1.2006 to 31.12.2008

ex 2907 29 00

4,4',4"-Ethylidynetriphenol

1.1.2006 to 31.12.2008

ex 2907 29 00

Mixture of isomers of methylenediphenol

1.1.2006 to 31.12.2008

ex 2907 29 00

6,6',6"-Tricyclohexyl-4,4',4"-butane-1,1,3-triyltri(m-cresol)

1.1.2006 to 31.12.2008

ex 2907 29 00

4,4'-(1,3-Phenylenediisopropylidene)diphenol

1.1.2006 to 31.12.2008

ex 2907 29 00

2,2',2",6,6',6"-Hexa-tert-butyl-α, α',α"-(mesitylene-2,4,6-triyl)tri-= p-cresol

1.1.2006 to 31.12.2008

ex 2907 29 00

Pyrogallol

1.1.2006 to 31.12.2008

ex 2907 29 00

Phloroglucinol whether or not hydrated

1.1.2006 to 31.12.2008

ex 2908 20 00

Disodium 3-hydroxynaphthalene-2,7-disulfonate

1.1.2006 to 31.12.2008

ex 2908 20 00

Dipotassium 7-hydroxynaphthalene-1,3-disulfonate

1.1.2006 to 31.12.2008

ex 2908 20 00

ex 3824 90 99

6-Hydroxynaphthalene-2-sulfonic acid and its salts

1.1.2006 to 31.12.2008

ex 2908 90 00

4-Nitroso-o-cresol

1.1.2006 to 31.12.2008

ex 2908 90 00

4-Nitrophenol

1.1.2006 to 31.12.2008

ex 2908 90 00

3-Nitro-p-cresol

1.1.2006 to 31.12.2008

ex 2909 19 00

1,2-Bis(2-chloroethoxy)ethane

1.1.2006 to 31.12.2008

ex 2909 19 00

Bis(2-chloroethyl) ether

1.1.2006 to 31.12.2008

ex 2909 19 00

Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more

1.1.2006 to 31.12.2008

ex 2909 30 38

Bis(pentabromophenyl) ether

1.1.2006 to 31.12.2008

ex 2909 30 90

4-(p-Tolyloxy)biphenyl

1.1.2006 to 31.12.2008

ex 2909 30 90

1,2-Bis(m-tolyloxy)ethane

1.1.2006 to 31.12.2008

ex 2909 30 90

1,2-Diphenoxyethane

1.1.2006 to 31.12.2008

ex 2909 44 00

2-Hexyloxyethanol

1.1.2006 to 31.12.2008

ex 2909 49 19

1-tert-Butoxypropan-2-ol

1.1.2006 to 31.12.2008

ex 2909 50 90

4-(2-Methoxyethyl)phenol

1.1.2006 to 31.12.2008

ex 2909 60 00

Bis(α, α-dimethylbenzyl) peroxide

1.1.2006 to 31.12.2008

ex 2910 90 00

2,3-Epoxypropan-1-ol (glycidol)

1.1.2006 to 31.12.2008

ex 2910 90 00

Perfluoroepoxypropane

1.1.2006 to 31.12.2008

ex 2910 90 00

ex 3824 90 99

1,2-Epoxyoctadecane, of a purity by weight of 82 % or more

1.1.2006 to 31.12.2008

ex 2910 90 00

(Epoxyethyl)benzene (styrene oxide)

1.1.2006 to 31.12.2008

ex 2912 29 00

Terephthalaldehyde

1.1.2006 to 31.12.2008

ex 2912 49 00

3-Phenoxybenzaldehyde

1.1.2006 to 31.12.2008

ex 2914 19 90

3,3-Dimethylbutan-2-one

1.1.2006 to 31.12.2008

2914 21 00

Camphor

1.1.2006 to 31.12.2008

ex 2914 29 00

Estr-4-ene-3,17-dione

1.1.2006 to 31.12.2008

ex 2914 29 00

Cyclohexadec-8-enone

1.1.2006 to 31.12.2008

ex 2914 39 00

Benz[de]anthracen-7-one

1.1.2006 to 31.12.2008

ex 2914 50 00

2'-Hydroxyacetophenone

1.1.2006 to 31.12.2008

ex 2914 50 00

4'-Hydroxyacetophenone

1.1.2006 to 31.12.2008

ex 2914 50 00

6'-Methoxy-2'-acetonaphthone

1.1.2006 to 31.12.2008

ex 2914 69 90

2-Ethylanthraquinone

1.1.2006 to 31.12.2008

ex 2914 69 90

2-Pentylanthraquinone

1.1.2006 to 31.12.2008

ex 2914 69 90

1,4-Dihydroxyanthraquinone

1.1.2006 to 31.12.2008

ex 2914 69 90

2,3-Dihydro-1,4-dihydroxyanthraquinone

1.1.2006 to 31.12.2008

ex 2914 69 90

2-Methylanthraquinone

1.1.2006 to 31.12.2008

ex 2914 70 00

1-Chloro-3,3-dimethylbutan-2-one

1.1.2006 to 31.12.2008

ex 2914 70 00

4,4'-Dibromobenzil

1.1.2006 to 31.12.2008

ex 2914 70 00

Perfluoro(2-methylpentan-3-one)

1.1.2006 to 31.12.2008

ex 2914 70 00

3'-Chloropropiophenone

1.1.2006 to 31.12.2008

2915 24 00

Acetic anhydride

1.1.2006 to 31.12.2008

ex 2915 29 00

Antimony triacetate

1.1.2006 to 31.12.2008

ex 2915 39 90

5α-Bromo-6β-hydroxy-17-oxo-androstan-3β-yl acetate

1.1.2006 to 31.12.2008

ex 2915 39 90

But-3-ene-1,2-diyl di(acetate)

1.1.2006 to 31.12.2008

ex 2915 39 90

tert-Butyl acetate

1.1.2006 to 31.12.2008

ex 2915 39 90

3-Acetylphenyl acetate

1.1.2006 to 31.12.2008

ex 2915 39 90

1-Phenylethyl acetate

1.1.2006 to 31.12.2008

ex 2915 40 00

Vinyl chloroacetate

1.1.2006 to 31.12.2008

ex 2915 90 80

Trimethyl orthoacetate

1.1.2006 to 31.12.2008

ex 2915 90 80

2-Ethylbutyric acid

1.1.2006 to 31.12.2008

ex 2915 90 80

Nonanoic acid (pelargonic acid)

1.1.2006 to 31.12.2008

ex 2916 12 90

2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)= - 4-methylphenyl acrylate

1.1.2006 to 31.12.2008

ex 2916 12 90

2-Ethoxyethyl acrylate

1.1.2006 to 31.12.2008

ex 2916 12 90

Isobutyl acrylate

1.1.2006 to 31.12.2008

ex 2916 13 00

Hydroxyzinc methacrylate, in the form of powder

1.1.2006 to 31.12.2008

ex 2916 13 00

Zinc dimethacrylate, in the form of powder

1.1.2006 to 31.12.2008

ex 2916 14 90

2,3-Epoxypropyl methacrylate

1.1.2006 to 31.12.2008

ex 2916 19 80

Methyl 3,3-dimethylpent-4-enoate

1.1.2006 to 31.12.2008

ex 2916 20 00

Methyl 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate

1.1.2006 to 31.12.2008

ex 2916 20 00

Empenthrin (ISO)

1.1.2006 to 31.12.2008

ex 2916 20 00

Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate

1.1.2006 to 31.12.2008

ex 2916 39 00

Biphenyl-4-carboxylic acid

1.1.2006 to 31.12.2008

ex 2916 39 00

3,5-Dichlorobenzoyl chloride

3.6

1.1.2006 to 31.12.2008

ex 2916 39 00

p-Toluic acid

1.1.2006 to 31.12.2008

ex 2916 39 00

o-Chlorophenylacetic acid

1.1.2006 to 31.12.2008

ex 2916 39 00

Vinyl 4-tert-butylbenzoate

1.1.2006 to 31.12.2008

ex 2916 39 00

3,5-Dimethylbenzoyl chloride

1.1.2006 to 31.12.2008

ex 2916 39 00

4-Ethylbenzoyl chloride

1.1.2006 to 31.12.2008

ex 2916 39 00

Ibuprofen (INN)

1.1.2006 to 31.12.2008

ex 2916 39 00

Ethyl 2-(4-nitrophenyl)butyrate

1.1.2006 to 31.12.2008

ex 2916 39 00

2,6-difluorobenzoic acid

1.1.2006 to 31.12.2008

ex 2917 11 00

Bis(p-methylbenzyl) oxalate

1.1.2006 to 31.12.2008

ex 2917 19 90

Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulfonate

1.1.2006 to 31.12.2008

ex 2917 19 90

Dodecanedioic acid, of a purity by weight of more than 98,5 %

1.1.2006 to 31.12.2008

ex 2917 19 90

Glutaric anhydride

1.1.2006 to 31.12.2008

ex 2917 19 90

Diethyl isobutylmalonate

1.1.2006 to 31.12.2008

ex 2917 19 90

Itaconic acid

1.1.2006 to 31.12.2008

ex 2917 20 00

1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride

1.1.2006 to 31.12.2008

ex 2917 20 00

3-Methyl-1,2,3,6-tetrahydrophthalic anhydride

1.1.2006 to 31.12.2008

ex 2917 34 00

Diallyl phthalate

1.1.2006 to 31.12.2008

ex 2917 39 80

Dimethyl naphthalene-2,6-dicarboxylate

1.1.2006 to 31.12.2008

ex 2917 39 80

Benzene-1,2,4,5-tetracarboxylic acid (pyromellitic acid)

1.1.2006 to 31.12.2008

ex 2917 39 80

Benzene-1,2: 4,5-tetracarboxylic dianhydride (pyromellitic dianhydride)

1.1.2006 to 31.12.2008

ex 2917 39 80

Biphenyl-3,4: 3',4'-tetracarboxylic dianhydride

1.1.2006 to 31.12.2008

ex 2918 13 00

L-(-)-Di-p-toluoyltartaric acid

1.1.2006 to 31.12.2008

ex 2918 19 80

L-Malic acid

1.1.2006 to 31.12.2008

ex 2918 19 80

2,2-Bis(hydroxymethyl)butyric acid

1.1.2006 to 31.12.2008

ex 2918 19 80

DL-mandelic acid

1.1.2006 to 31.12.2008

ex 2918 29 10

Monohydroxynaphthoic acids

1.1.2006 to 31.12.2008

ex 2918 29 80

Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate]

1.1.2006 to 31.12.2008

ex 2918 29 80

Gallic acid, of a purity by weight of 98,5 % or more calculated on the dry weight (measured by acidimetry)

1.1.2006 to 31.12.2008

ex 2918 30 00

2-(4-Ethylbenzoyl)benzoic acid

1.1.2006 to 31.12.2008

ex 2918 90 90

3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate

1.1.2006 to 31.12.2008

ex 2918 90 90

Methyl 3-methoxyacrylate

1.1.2006 to 31.12.2008

ex 2918 90 90

Methyl 2-(4-hydroxyphenoxy)propionate

1.1.2006 to 31.12.2008

ex 2918 90 90

trans-4-Hydroxy-3-methoxycinnamic acid

1.1.2006 to 31.12.2008

ex 2918 90 90

Methyl 3,4,5-trimethoxybenzoate

1.1.2006 to 31.12.2008

ex 2918 90 90

3,4,5-Trimethoxybenzoic acid

1.1.2006 to 31.12.2008

ex 2918 90 90

methyl 5-methoxy-3-oxopentanoate

1.1.2006 to 31.12.2008

ex 2919 00 90

2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt

1.1.2006 to 31.12.2008

ex 2919 00 90

Diammonium salt of tetramyristoylcardiolipin

1.1.2006 to 31.12.2008

ex 2919 00 90

Aluminium hydroxybis[2,2'-methylenebis(4,6-di-tert-butylphenyl)phosphate]

1.1.2006 to 31.12.2008

ex 2919 00 90

Tri-n-hexylphosphate

1.1.2006 to 31.12.2008

ex 2920 10 00

Fenitrothion (ISO)

1.1.2006 to 31.12.2008

ex 2920 10 00

Tolclofos-methyl (ISO)

1.1.2006 to 31.12.2008

ex 2920 90 10

Diethyl sulfate

1.1.2006 to 31.12.2008

ex 2920 90 10

Diallyl 2,2'-oxydiethyl dicarbonate

1.1.2006 to 31.12.2008

ex 2920 90 10

4-Ethyl-1,3-dioxolan-2-one

1.1.2006 to 31.12.2008

ex 2920 90 10

Dimethyl carbonate

1.1.2006 to 31.12.2008

ex 2920 90 10

Di-tert-butyl dicarbonate

1.1.2006 to 31.12.2008

2920 90 30

Trimethyl phosphite

1.1.2006 to 31.12.2008

ex 2920 90 85

O, O'-Dioctadecyl pentaerythritol bis(phosphite)

1.1.2006 to 31.12.2008

ex 2920 90 85

Tritolyl phosphite

1.1.2006 to 31.12.2008

ex 2920 90 85

Triisooctylphosphite

1.1.2006 to 31.12.2008

ex 2921 19 80

Triallylamine

1.1.2006 to 31.12.2008

ex 2921 19 80

Ethyl(2-methylallyl)amine

1.1.2006 to 31.12.2008

ex 2921 19 80

Allylamine

1.1.2006 to 31.12.2008

ex 2921 29 00

N, N,N',N'-Tetrabutylhexamethylenediamine

1.1.2006 to 31.12.2008

ex 2921 29 00

Tris[3-(dimethylamino)propyl]amine

1.1.2006 to 31.12.2008

ex 2921 29 00

Bis[3-(dimethylamino)propyl]methylamine

1.1.2006 to 31.12.2008

ex 2921 29 00

N, N'-Di-tert-butylethylenediamine

1.1.2006 to 31.12.2008

ex 2921 30 99

Dicyclohexyl(methyl)amine

1.1.2006 to 31.12.2008

ex 2921 30 99

Cyclohex-1,3-ylenebis(methylamine), for the manufacture of dishwashing products (1)

1.1.2006 to 31.12.2008

ex 2921 42 10

2,6-Dichloro-4-nitroaniline

1.1.2006 to 31.12.2008

ex 2921 42 10

4-Amino-3-nitrobenzenesulphonic acid

1.1.2006 to 31.12.2008

ex 2921 42 10

2-Bromo-4,6-dinitroaniline

1.1.2006 to 31.12.2008

ex 2921 42 10

Sodium hydrogen 2-aminobenzene-1,4-disulphonate

1.1.2006 to 31.12.2008

ex 2921 42 10

4-Aminobenzene-1,3-disulfonic acid and its salts

1.1.2006 to 31.12.2008

ex 2921 42 10

2-Bromo-6-chloro-4-nitroaniline

1.1.2006 to 31.12.2008

ex 2921 42 10

3-Aminobenzenesulfonic acid

1.1.2006 to 31.12.2008

ex 2921 42 10

2-Aminobenzene-1,4-disulfonic acid

1.1.2006 to 31.12.2008

ex 2921 42 10

4-Chloro-2-nitroaniline

1.1.2006 to 31.12.2008

ex 2921 42 10

3,5-dichloroaniline

1.1.2006 to 31.12.2008

ex 2921 43 00

5-Amino-2-chlorotoluene-4-sulfonic acid

1.1.2006 to 31.12.2008

ex 2921 43 00

4-Amino-6-chlorotoluene-3-sulfonic acid

1.1.2006 to 31.12.2008

ex 2921 43 00

3-Nitro-p-toluidine

1.1.2006 to 31.12.2008

ex 2921 44 00

Methyldiphenylamine

1.1.2006 to 31.12.2008

ex 2921 44 00

Diphenylamine

1.1.2006 to 31.12.2008

ex 2921 45 00

Sodium hydrogen 3-aminonaphthalene-1,5-disulfonate

1.1.2006 to 31.12.2008

ex 2921 45 00

2-Aminonaphthalene-1,5-disulfonic acid and its sodium salts

1.1.2006 to 31.12.2008

ex 2921 45 00

2-Aminonaphthalene-1-sulfonic acid

1.1.2006 to 31.12.2008

ex 2921 45 00

1-Naphthylamine

1.1.2006 to 31.12.2008

ex 2921 49 10

Pendimethalin (ISO)

3.5

1.1.2006 to 31.12.2008

ex 2921 49 80

8-Anilinonaphthalene-1-sulfonic acid

1.1.2006 to 31.12.2008

ex 2921 49 80

N-1-Naphthylaniline

1.1.2006 to 31.12.2008

ex 2921 51 19

Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight

1.1.2006 to 31.12.2008

ex 2921 59 90

Mixture of isomers of 3,5-diethyltoluenediamine

1.1.2006 to 31.12.2008

ex 2921 59 90

ex 3824 90 99

4-(4-Aminoanilino)-3-nitrobenzenesulfonic acid

1.1.2006 to 31.12.2008

ex 2921 59 90

4,4'-diaminostilbene-2,2'-disulphonic acid

1.1.2006 to 31.12.2008

ex 2922 19 80

4,4-Dimethoxybutylamine

1.1.2006 to 31.12.2008

ex 2922 19 80

N, N,N',N'-Tetramethyl-2,2'-oxybis(ethylamine)

1.1.2006 to 31.12.2008

ex 2922 19 80

2-Amino-2-methylpropanol, for use in the manufacture of goods of subheadings 3004 90 and 3305 30 (1)

1.1.2006 to 31.12.2008

ex 2922 19 80

2-(2-Methoxyphenoxy)ethylamine

1.1.2006 to 31.12.2008

ex 2922 19 80

N, N,N'-trimethyl-N'-(2-hydroxy-ethyl) 2,2'-oxybis(ethylamine)

1.1.2006 to 31.12.2008

ex 2922 21 00

2-Amino-5-hydroxynaphthalene-1,7-disulfonic acid and its salts, of a purity by weight of 60 % or more

1.1.2006 to 31.12.2008

ex 2922 21 00

4-Hydroxy-7-methylaminonaphthalene-2-sulfonic acid

1.1.2006 to 31.12.2008

ex 2922 21 00

6-Amino-4-hydroxynaphthalene-2-sulfonic acid

1.1.2006 to 31.12.2008

ex 2922 21 00

7-Amino-4-hydroxynaphthalene-2-sulfonic acid

1.1.2006 to 31.12.2008

ex 2922 21 00

Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate

1.1.2006 to 31.12.2008

ex 2922 22 00

Anisidines

1.1.2006 to 31.12.2008

ex 2922 29 00

2-Methyl-N-phenyl-p-anisidine

1.1.2006 to 31.12.2008

ex 2922 29 00

N-Methyl-2-(3,4-dimethoxyphenyl)ethylamine

1.1.2006 to 31.12.2008

ex 2922 29 00

3-Aminophenol

1.1.2006 to 31.12.2008

ex 2922 29 00

4-Amino-5-methoxy-2-methylbenzenesulfonic acid

1.1.2006 to 31.12.2008

ex 2922 29 00

2-Amino-4-tert-pentyl-6-nitrophenol

1.1.2006 to 31.12.2008

ex 2922 29 00

6-Methoxy-m-toluidine

1.1.2006 to 31.12.2008

ex 2922 29 00

3,5-Dichloro-4-(1,1,2,2-tetrafluoroethoxy)aniline

1.1.2006 to 31.12.2008

ex 2922 29 00

4-Nitro-o-anisidine

1.1.2006 to 31.12.2008

ex 2922 29 00

3-Diethylaminophenol

1.1.2006 to 31.12.2008

ex 2922 39 00

1-Amino-4-bromo-9,10-dioxoanthracene-2-sulfonic acid and its salts

1.1.2006 to 31.12.2008

ex 2922 39 00

1-Aminoanthraquinone

1.1.2006 to 31.12.2008

ex 2922 39 00

1-Bromo-4-methylaminoanthraquinone

1.1.2006 to 31.12.2008

ex 2922 39 00

1,4-Diamino-2,3-dichloroanthraquinone

1.1.2006 to 31.12.2008

ex 2922 39 00

2-Aminoanthraquinone

1.1.2006 to 31.12.2008

ex 2922 39 00

1,4-Diamino-2,3-dihydroanthraquinone

1.1.2006 to 31.12.2008

ex 2922 43 00

Anthranilic acid

1.1.2006 to 31.12.2008

ex 2922 49 95

Ornithine aspartate (INNM)

1.1.2006 to 31.12.2008

ex 2922 49 95

12-Aminododecanoic acid

1.1.2006 to 31.12.2008

ex 2922 49 95

DL-Aspartic acid

1.1.2006 to 31.12.2008

ex 2922 49 95

Norvaline

1.1.2006 to 31.12.2008

ex 2922 50 00

2-(3-Amino-4-chlorobenzoyl)benzoic acid

1.1.2006 to 31.12.2008

ex 2922 50 00

2-(4-Dibutylaminosalicyloyl)benzoic acid

1.1.2006 to 31.12.2008

ex 2922 50 00

2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate

1.1.2006 to 31.12.2008

ex 2923 90 00

Tetramethylammonium hydroxide, in the form of an aqueous solution containing:

—	(25 ± 0,5 ) % by weight of tetramethylammonium hydroxide,

—	500 mg/kg or less of carbonate,

—	200 mg/kg or less of chloride and

—	5 mg/kg or less of potassium

1.1.2006 to 31.12.2008

ex 2923 90 00

3-chloro-2-hydroxypropyldimethyldodecylammoniumchloride in the form of an aqueous solution

1.1.2006 to 31.12.2008

ex 2923 90 00

Tetramethylammonium hydroxide pentahydrate, of a purity by weight of 98 % or more

1.1.2006 to 31.12.2008

ex 2923 90 00

Benzyldimethyl(octadecyl)ammonium salts, for use in the manufacture of toner for photocopiers (1)

1.1.2006 to 31.12.2008

ex 2923 90 00

Tetraethylammonium hydroxide, in the form of an aqueous solution containing:

—	(35 ± 0,5 ) % by weight of tetraethylammonium hydroxide,

—	2 000 mg/kg or less of chloride,

—	2 mg/kg or less of iron and

—	10 mg/kg or less of potasium

1.1.2006 to 31.12.2008

ex 2923 90 00

Tetrabutylammonium hydroxide, in the form of an aqueous solution containing by weight:

—	(55 ± 1,0 ) % of tetrabutylammonium hydroxide,

—	0,5 % or less of bromide,

—	0,4 % or less of tributylamine,

—	0,3 % or less of carbonate and

—	0,2 % or less of potassium and sodium taken together

1.1.2006 to 31.12.2008

ex 2923 90 00

Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:

—	(40 ± 2) % by weight of tetrapropylammonium hydroxide,

—	0,3 % by weight or less of carbonate,

—	0,1 % by weight or less of tripropylamine,

—	500 mg/kg or less of bromide and

—	25 mg/kg or less of potassium and sodium taken together

1.1.2006 to 31.12.2008

ex 2923 90 00

Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride

1.1.2006 to 31.12.2008

ex 2924 19 00

2-Acrylamido-2-methylpropanesulfonic acid and its sodium or ammonium salts

1.1.2006 to 31.12.2008

ex 2924 19 00

N, N'-Methylenediacrylamide

1.1.2006 to 31.12.2008

ex 2924 19 00

Methyl 2-acetamido-3-chloropropionate

1.1.2006 to 31.12.2008

ex 2924 19 00

N-(1,1-Dimethyl-3-oxobutyl)acrylamide

1.1.2006 to 31.12.2008

ex 2924 19 00

Acrylamide

1.1.2006 to 31.12.2008

ex 2924 21 90

ex 3824 90 99

4,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts

1.1.2006 to 31.12.2008

ex 2924 29 95

Alachlor (ISO)

1.1.2006 to 31.12.2008

ex 2924 29 95

Acetochlor (ISO)

1.1.2006 to 31.12.2008

ex 2924 29 95

3'-Amino-4'-methoxyacetanilide

1.1.2006 to 31.12.2008

ex 2924 29 95

3'-Diethylaminoacetanilide

1.1.2006 to 31.12.2008

ex 2924 29 95

Propachlor (ISO)

1.1.2006 to 31.12.2008

ex 2924 29 95

Diethofencarb (ISO)

1.1.2006 to 31.12.2008

ex 2924 29 95

7-Acetamido-4-hydroxynaphthalene-2-sulfonic acid and its sodium salts

1.1.2006 to 31.12.2008

ex 2924 29 95

3'-Diethylamino-4'-methoxyacetanilide

1.1.2006 to 31.12.2008

ex 2924 29 95

5-[N-(2-Acetoxyethyl)acetoxyacetamido]-N, N'-bis(2,3-diacetoxy= propyl)-2,4,6-triiodoisophthalamide

1.1.2006 to 31.12.2008

ex 2924 29 95

4'-Amino-N-methylacetanilide

1.1.2006 to 31.12.2008

ex 2924 29 95

Beflubutamid (ISO)

1.1.2006 to 31.12.2008

ex 2924 29 95

2-(4-Hydroxyphenyl)acetamide

1.1.2006 to 31.12.2008

ex 2924 29 95

4-Acetamido-2-aminobenzenesulfonic acid

1.1.2006 to 31.12.2008

ex 2924 29 95

3-Amino-p-anisanilide

1.1.2006 to 31.12.2008

ex 2924 29 95

5'-Chloro-3-hydroxy-2',4'-dimethoxy-2-naphtanilide

1.1.2006 to 31.12.2008

ex 2924 29 95

p-Aminobenzamide

1.1.2006 to 31.12.2008

ex 2924 29 95

3-Hydroxy-2'-methoxy-2-naphthanilide

1.1.2006 to 31.12.2008

ex 2924 29 95

3-Hydroxy-2-naphthanilide

1.1.2006 to 31.12.2008

ex 2924 29 95

3-Hydroxy-2'-methyl-2-naphthanilide

1.1.2006 to 31.12.2008

ex 2924 29 95

2'-Ethoxy-3-hydroxy-2-naphthanilide

1.1.2006 to 31.12.2008

ex 2924 29 95

N-{3-[3-(Dimethylamino)prop-2-enoyl]phenyl}-N-ethylacetamide

1.1.2006 to 31.12.2008

ex 2924 29 95

4'-Chloro-3-hydroxy-2',5'-dimethoxy-2-naphthanilide

1.1.2006 to 31.12.2008

ex 2924 29 95

1,1-Cyclohexanediacetic acid monoamide

1.1.2006 to 31.12.2008

ex 2925 11 00

Saccharin and its sodium salt

1.1.2006 to 31.12.2008

ex 2925 19 95

N-Phenylmaleimide

1.1.2006 to 31.12.2008

ex 2925 19 95

N-(9-Fluorenylmethoxycarbonyloxy)succinimide

1.1.2006 to 31.12.2008

ex 2925 20 00

Dicyclohexylcarbodiimide

1.1.2006 to 31.12.2008

ex 2926 90 95

Methacrylonitrile

1.1.2006 to 31.12.2008

ex 2926 90 95

Cyano(3-phenoxyphenyl)methyl 3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate

1.1.2006 to 31.12.2008

ex 2926 90 95

2-(m-Benzoylphenyl)propiononitrile

1.1.2006 to 31.12.2008

ex 2926 90 95

Aminoacetonitrile hydrochloride

1.1.2006 to 31.12.2008

ex 2926 90 95

2-Amino-5-nitrobenzonitrile

1.1.2006 to 31.12.2008

ex 2926 90 95

2-Bromo-2(bromomethyl)pentanedinitrile

1.1.2006 to 31.12.2008

ex 2926 90 95

2-Cyanoacetamide

1.1.2006 to 31.12.2008

ex 2926 90 95

Alkyl or alkoxyalkyl esters of cyanoacetic acid

1.1.2006 to 31.12.2008

ex 2926 90 95

Cyanoacetic acid in crystalline form

1.1.2006 to 31.12.2008

ex 2926 90 95

Malononitrile

1.1.2006 to 31.12.2008

ex 2926 90 95

Tetrachloroterephthalonitrile

1.1.2006 to 31.12.2008

ex 2926 90 95

Ethyl 2-cyano-2-ethyl-3-methylhexanoate

1.1.2006 to 31.12.2008

ex 2926 90 95

Ethyl 2-cyano-2-phenylbutyrate

1.1.2006 to 31.12.2008

ex 2926 90 95

Ethyl 2-allyl-2-cyano-3-methylhexanoate

1.1.2006 to 31.12.2008

ex 2926 90 95

Ethylenediaminetetraacetonitrile

1.1.2006 to 31.12.2008

ex 2926 90 95

Nitrilotriacetonitrile

1.1.2006 to 31.12.2008

ex 2926 90 95

1,3-Propylenediaminetetraacetonitrile

1.1.2006 to 31.12.2008

ex 2926 90 95

Butyronitrile

1.1.2006 to 31.12.2008

ex 2927 00 00

2,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride

1.1.2006 to 31.12.2008

ex 2927 00 00

4-Anilino-2-methoxybenzenediazonium hydrogen sulfate

1.1.2006 to 31.12.2008

ex 2927 00 00

ex 3824 90 99

4'-Aminoazobenzene-4-sulfonic acid

1.1.2006 to 31.12.2008

ex 2927 00 00

2-Hydroxynaphthalene-1-diazonium-4-sulfonate

1.1.2006 to 31.12.2008

ex 2927 00 00

ex 3824 90 99

2-Hydroxy-6-nitronaphthalene-1-diazonium-4-sulfonate, of a purity by weight of 60 % or more

1.1.2006 to 31.12.2008

ex 2928 00 90

3,3'-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N, N'-bipropionamide

1.1.2006 to 31.12.2008

ex 2928 00 90

2,4,6-Trichlorophenylhydrazine

1.1.2006 to 31.12.2008

ex 2928 00 90

O-Ethylhydroxylamine, in the form of an aqueous solution

1.1.2006 to 31.12.2008

ex 2928 00 90

N-Isopropylhydroxylamine, in the form of an aqueous solution

1.1.2006 to 31.12.2008

ex 2928 00 90

Adipohydrazide

1.1.2006 to 31.12.2008

ex 2928 00 90

Tetrakis(4-methylpentan-2-oximino)silane

1.1.2006 to 31.12.2008

ex 2928 00 90

Cyflufenamid (ISO)

1.1.2006 to 31.12.2008

ex 2929 10 90

Methylenedicyclohexyl diisocyanates

1.1.2006 to 31.12.2008

ex 2929 10 90

3,3'-Dimethylbiphenyl-4,4'-diyl diisocyanate

1.1.2006 to 31.12.2008

ex 2929 10 90

m-Isopropenyl-α, α-dimethylbenzyl isocyanate

1.1.2006 to 31.12.2008

ex 2929 10 90

m-Phenylenediisopropylidene diisocyanate

1.1.2006 to 31.12.2008

ex 2929 10 90

Trimethylhexamethylene diisocyanate, mixed isomers

1.1.2006 to 31.12.2008

ex 2929 10 90

9,9'-(3-Heptyl-4-pentylcyclohex-1,2-ylene)dinonyl diisocyanate

1.1.2006 to 31.12.2008

ex 2929 90 00

Ethyl isocyanoacetate

1.1.2006 to 31.12.2008

ex 2930 90 70

Thiophenol

1.1.2006 to 31.12.2008

ex 2930 90 70

Ethoprophos (ISO)

1.1.2006 to 31.12.2008

ex 2930 90 70

3,3-Dimethyl-1-methylthiobutanone oxime

1.1.2006 to 31.12.2008

ex 2930 90 70

Thiophanate-methyl (ISO)

1.1.2006 to 31.12.2008

ex 2930 90 70

4-(4-Isopropoxyphenylsulfonyl)phenol

1.1.2006 to 31.12.2008

ex 2930 90 70

3,3'-Thiodi(propionic acid)

1.1.2006 to 31.12.2008

ex 2930 90 70

2-[(p-Aminophenyl)sulfonyl]ethyl hydrogen sulfate

1.1.2006 to 31.12.2008

ex 2930 90 70

ex 3824 90 99

2-Chlorophenylsulfonyl isocyanate, in the form of a solution in xylene

1.1.2006 to 31.12.2008

ex 2930 90 70

ex 3824 90 99

Methyl 2-(isocyanatosulfonyl)methylbenzoate, in the form of a solution in xylene

1.1.2006 to 31.12.2008

ex 2930 90 70

Methyl phenyl sulfide

1.1.2006 to 31.12.2008

ex 2930 90 70

Diiodomethyl p-tolyl sulfone

1.1.2006 to 31.12.2008

ex 2930 90 70

ex 3824 90 99

2-Aminophenyl phenyl sulfone, of a purity by weight of 75 % or more

1.1.2006 to 31.12.2008

ex 2930 90 70

4,4'-[Methylenebis(oxyethylenethio)]diphenol

1.1.2006 to 31.12.2008

ex 2930 90 70

Captan (ISO)

1.1.2006 to 31.12.2008

ex 2930 90 70

Mesotrione (ISO)

1.1.2006 to 31.12.2008

ex 2930 90 70

4-Hydroxybenzenethiol

1.1.2006 to 31.12.2008

ex 2930 90 70

3-Sulfinobenzoic acid

1.1.2006 to 31.12.2008

ex 2930 90 70

Methylene dithiocyanate

1.1.2006 to 31.12.2008

2931 00 10

Dimethyl methylphosphonate

1.1.2006 to 31.12.2008

ex 2931 00 95

Butylethylmagnesium, in the form of a solution in heptane

1.1.2006 to 31.12.2008

ex 2931 00 95

2-Diphenylphosphinobenzoic acid

1.1.2006 to 31.12.2008

ex 2931 00 95

Bis(2-chloroethyl) 2-chloroethylphosphonate

1.1.2006 to 31.12.2008

ex 2931 00 95

Sodium phenylphosphinate

1.1.2006 to 31.12.2008

ex 2931 00 95

Bis(2-chloroethyl) vinylphosphonate

1.1.2006 to 31.12.2008

ex 2931 00 95

Sodium tetraphenylborate

1.1.2006 to 31.12.2008

ex 2931 00 95

N-(Phosphonomethyl)iminodiacetic acid

1.1.2006 to 31.12.2008

ex 2931 00 95

Tributylphosphine

1.1.2006 to 31.12.2008

ex 2931 00 95

Bis(2,4,4-trimethylpentyl)phosphinic acid

1.1.2006 to 31.12.2008

ex 2931 00 95

Dimethyl[dimethylsilyldiindenyl]hafnium

1.1.2006 to 31.12.2008

ex 2931 00 95

Trioctylphosphine oxide

1.1.2006 to 31.12.2008

ex 2931 00 95

Triethylborane

1.1.2006 to 31.12.2008

ex 2931 00 95

N, N-Dimethylanilinium tetrakis(pentafluorophenyl)borate

1.1.2006 to 31.12.2008

ex 2931 00 95

{2,7-Di-tert-butyl-9-[(η 5-cyclopentadienyl)bis(4-triethyl= silylphenyl)methyl]-4a,4b,8a,9,9a-η-fluorene}dimethylhafnium, in the form of a solution in hexane

1.1.2006 to 31.12.2008

ex 2931 00 95

Methylbis(4-methylpentan-2-oximino)vinylsilane

1.1.2006 to 31.12.2008

ex 2931 00 95

Tributyl(tetradecyl)phosphonium chloride, whether or not in the form of an aqueous solution

1.1.2006 to 31.12.2008

ex 2931 00 95

Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane

1.1.2006 to 31.12.2008

ex 2931 00 95

Tris(4-methylpentan-2-oximino)methylsilane

1.1.2006 to 31.12.2008

ex 2931 00 95

Tris(4-methylpentan-2-oximino)vinylsilane

1.1.2006 to 31.12.2008

ex 2931 00 95

Tetrabutylphosphonium acetate, in the form of an aqueous solution

1.1.2006 to 31.12.2008

ex 2931 00 95

Trichloro(3-chloropropyl)silane

1.1.2006 to 31.12.2008

ex 2932 13 00

Tetrahydrofurfuryl alcohol

1.1.2006 to 31.12.2008

ex 2932 19 00

Furan of a purity by weight of 99 % or more

1.1.2006 to 31.12.2008

ex 2932 19 00

2,3-Dihydrofuran

1.1.2006 to 31.12.2008

ex 2932 19 00

Furfurylamine

1.1.2006 to 31.12.2008

ex 2932 19 00

Tetrahydro-2-methylfuran

1.1.2006 to 31.12.2008

ex 2932 19 00

Octafluorotetrahydrofuran

1.1.2006 to 31.12.2008

ex 2932 29 85

2'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran= -1(3H),9'-xanthen]-3-one

1.1.2006 to 31.12.2008

ex 2932 29 85

13,14,15,16-Tetranorlabdano-12,8α-lactone

1.1.2006 to 31.12.2008

ex 2932 29 85

2'-(2-Chloroanilino)-6'-dibutylaminospiro[isobenzofuran= -1(3H),9'-xanthen]-3-one

1.1.2006 to 31.12.2008

ex 2932 29 85

2'-Anilino-3'-methyl-6'-methyl(propyl)aminospiro[isobenzofuran= -1(3H),9'-xanthen]-3-one

1.1.2006 to 31.12.2008

ex 2932 29 85

6'-Diethylamino-3'-methyl-2'-(2,4-xylidino)spiro[isobenzofuran= -1(3H),9'-xanthen]-3-one

1.1.2006 to 31.12.2008

ex 2932 29 85

2'-Anilino-6'-(N-ethyl-p-toluidino)-3'-methylspiro[isobenzofuran= -1(3H),9'-xanthen]-3-one

1.1.2006 to 31.12.2008

ex 2932 29 85

2'-Anilino-6'-ethyl(isobutyl)amino-3'-methylspiro[isobenzofuran= -1(3H),9'-xanthen]-3-one

1.1.2006 to 31.12.2008

ex 2932 29 85

2'-Anilino-6'-cyclohexyl(methyl)amino-3'-methylspiro[isobenzofuran= -1(3H),9'-xanthen]-3-one

1.1.2006 to 31.12.2008

ex 2932 29 85

6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide

1.1.2006 to 31.12.2008

ex 2932 29 85

3',6'-Bis(ethylamino)-2',7'-dimethylspiro[isobenzofuran-1(3H),9'-= [9H]-xanthen]-3-one

1.1.2006 to 31.12.2008

ex 2932 29 85

Rofecoxib (INN)

1.1.2006 to 31.12.2008

ex 2932 99 70

Bendiocarb (ISO)

1.1.2006 to 31.12.2008

ex 2932 99 70

Androsta-1,4-diene-3,17-dione 17-(2,2-dimethylpropylene) acetal

1.1.2006 to 31.12.2008

ex 2932 99 70

1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol

1.1.2006 to 31.12.2008

ex 2932 99 70

5-Propyl-1,3-benzodioxole

1.1.2006 to 31.12.2008

ex 2932 99 70

Calcium bis[4-O-(β-D-galactopyranosyl)-D-gluconate] dihydrate

1.1.2006 to 31.12.2008

ex 2932 99 85

(2-Butylbenzofuran-3-yl) (4-hydroxy-3,5-diiodophenyl) ketone

1.1.2006 to 31.12.2008

ex 2932 99 85

Carbofuran (ISO)

1.1.2006 to 31.12.2008

ex 2933 19 90

4,5-Diamino-l-(2-hydroxyethyl)-1H-pyrazole sulfate

1.1.2006 to 31.12.2008

ex 2933 19 90

4-Amino-1-methyl-3-propylpyrazole-5-carboxamide

1.1.2006 to 31.12.2008

ex 2933 19 90

3-Methyl-1-p-tolyl-5-pyrazolone

1.1.2006 to 31.12.2008

ex 2933 19 90

Edaravone (INN)

1.1.2006 to 31.12.2008

ex 2933 21 00

Hydantoin

1.1.2006 to 31.12.2008

ex 2933 21 00

2-(3-Benzyl-2,5-dioxoimidazolidin-1-yl)-2'-chloro-5'-(3-dodecyl= sulfonyl-2-methylpropionamido)-4,4-dimethyl-3-oxovaleranilide

1.1.2006 to 31.12.2008

ex 2933 21 00

1-[1,3-Bis(hydroxymethyl)-2,5-dioxoimidazolidin-4-yl]= -1,3-bis(hydroxymethyl)urea

1.1.2006 to 31.12.2008

ex 2933 29 90

Reaction product consisting of the methyl esters of (±)-6-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-m-toluic acid and (±)-2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-p-toluic acid (Imazamethabenz-methyl)

1.1.2006 to 31.12.2008

ex 2933 29 90

Triflumizole (ISO)

1.1.2006 to 31.12.2008

ex 2933 29 90

1,3-Dimethylimidazolidin-2-one

1.1.2006 to 31.12.2008

ex 2933 39 99

Cloperastine fendizoate (INNM)

1.1.2006 to 31.12.2008

ex 2933 39 99

Pyridine-2,3-dicarboxylic acid

1.1.2006 to 31.12.2008

ex 2933 39 99

5-Methyl-2-pyridylamine

1.1.2006 to 31.12.2008

ex 2933 39 99

Imazethapyr (ISO)

1.1.2006 to 31.12.2008

ex 2933 39 99

4,4'-Trimethylenedipiperidine

1.1.2006 to 31.12.2008

ex 2933 39 99

Aminopyralid (ISO)

1.1.2006 to 31.12.2008

ex 2933 39 99

2-Chloropyridine

1.1.2006 to 31.12.2008

ex 2933 39 99

3-(Carboxymethyl)pyridinium chloride

1.1.2006 to 31.12.2008

ex 2933 39 99

2-Fluoro-6-(trifluoromethyl)pyridine

1.1.2006 to 31.12.2008

ex 2933 39 99

Acetamiprid (ISO)

1.1.2006 to 31.12.2008

ex 2933 39 99

Etoricoxib (INN)

1.1.2006 to 31.12.2008

ex 2933 39 99

Picolinafen (ISO)

1.1.2006 to 31.12.2008

ex 2933 49 10

Quinmerac (ISO)

1.1.2006 to 31.12.2008

ex 2933 49 90

5,7-Dichloro-4-(4-fluorophenoxy)quinoline

1.1.2006 to 31.12.2008

ex 2933 49 90

N-Ethyl-5,6,7,8-tetrahydroquinolinium p-toluenesulfonate, in the form of a solution in water

1.1.2006 to 31.12.2008

ex 2933 49 90

Methyl 2-[(S)-3-{(E)-3-[2-(7-chloro-2-quinolyl)vinyl]phenyl}-3-hydroxypropyl]= benzoate monohydrate

1.1.2006 to 31.12.2008

ex 2933 49 90

5,6,7,8-Tetrahydroquinoline

1.1.2006 to 31.12.2008

ex 2933 49 90

Quinolin-8-ol

1.1.2006 to 31.12.2008

ex 2933 59 95

1-Ethyl-6-fluoro-1,4-dihydro-4-oxo-7-piperazin-1-yl-1,8-naphthyridine= - 3-carboxylic acid and its salts and esters

1.1.2006 to 31.12.2008

ex 2933 59 95

(2R)-4-Oxo-4-[3-(trifluoromethyl)-5,6-dihydro[1,2,4]triazolo[4,3-a]= pyrazin-7(8H)-yl]-1-(2,4,5-trifluorophenyl)butyl-2-ammonium phosphate monohydrate

1.1.2006 to 31.12.2008

ex 2933 59 95

2,4-Diamino-6-chloropyrimidine

1.1.2006 to 31.12.2008

ex 2933 59 95

2,5-Diamino-4,6-dihydroxypyrimidine monohydrochloride monohydrate

1.1.2006 to 31.12.2008

ex 2933 59 95

Mepanipyrim (ISO)

1.1.2006 to 31.12.2008

ex 2933 59 95

Guanine

1.1.2006 to 31.12.2008

ex 2933 59 95

1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate)

1.1.2006 to 31.12.2008

ex 2933 59 95

2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine

1.1.2006 to 31.12.2008

ex 2933 59 95

N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine

1.1.2006 to 31.12.2008

ex 2933 59 95

N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-(4-hydroxyphenyl)glycine

1.1.2006 to 31.12.2008

ex 2933 59 95

Adenine

1.1.2006 to 31.12.2008

ex 2933 69 80

1,3,5-Tris[(3,5-di-tert-butyl-4-hydroxyphenyl)methyl]-1,3,5-triazine= - 2,4,6(1H,3H,5H)-trione

1.1.2006 to 31.12.2008

ex 2933 69 80

Cyanazine (ISO)

1.1.2006 to 31.12.2008

ex 2933 69 80

1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione

1.1.2006 to 31.12.2008

ex 2933 69 80

Hexazinone (ISO)

1.1.2006 to 31.12.2008

ex 2933 69 80

Tris(2-hydroxyethyl)-1,3,5-triazinetrione

1.1.2006 to 31.12.2008

ex 2933 79 00

Ezetimibe (INN)

1.1.2006 to 31.12.2008

ex 2933 99 30

Azepane, for the manufacture of goods of subheading 3808 30 (1)

1.1.2006 to 31.12.2008

ex 2933 99 30

5H-Dibenz[b, f]azepine-5-carbonyl chloride

1.1.2006 to 31.12.2008

ex 2933 99 90

2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol

1.1.2006 to 31.12.2008

ex 2933 99 90

2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol

1.1.2006 to 31.12.2008

ex 2933 99 90

2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol

1.1.2006 to 31.12.2008

ex 2933 99 90

6,6'-Di-2H-benzotriazol-2-yl-4,4'-bis(1,1,3,3-tetramethylbutyl)= -2,2'-methylenediphenol

1.1.2006 to 31.12.2008

ex 2933 99 90

Quizalofop-P-ethyl (ISO)

1.1.2006 to 31.12.2008

ex 2933 99 90

Indoline

1.1.2006 to 31.12.2008

ex 2933 99 90

trans-4-Hydroxy-L-proline

1.1.2006 to 31.12.2008

ex 2933 99 90

Maleic hydrazide (ISO)

1.1.2006 to 31.12.2008

ex 2933 99 90

Metconazole (ISO)

3.2

1.1.2006 to 31.12.2008

ex 2933 99 90

5-Nitroindole

1.1.2006 to 31.12.2008

ex 2933 99 90

1,3-Bis(3-isocyanatomethylphenyl)-1,3-diazetidine-2,4-dione (dimeric 2,4-toluene diisocyanate)

1.1.2006 to 31.12.2008

ex 2933 99 90

Candesartan cilexetil (INNM)

1.1.2006 to 31.12.2008

ex 2933 99 90

6,7-Dihydro-5H-cyclopenta[b]pyridine

1.1.2006 to 31.12.2008

ex 2933 99 90

2,3-Dichloropyrazine

1.1.2006 to 31.12.2008

ex 2933 99 90

1-Methyltetrazole-5-thiol

1.1.2006 to 31.12.2008

ex 2933 99 90

Pyridaben (ISO)

1.1.2006 to 31.12.2008

ex 2933 99 90

Pyridate (ISO)

1.1.2006 to 31.12.2008

ex 2933 99 90

2,6-dichloroquinoxaline

1.1.2006 to 31.12.2008

ex 2933 99 90

Carbendazim (ISO)

1.1.2006 to 31.12.2008

ex 2934 10 00

Hexythiazox (ISO)

1.1.2006 to 31.12.2008

ex 2934 10 00

2-(4-Methylthiazol-5-yl)ethanol

1.1.2006 to 31.12.2008

ex 2934 10 00

5-[(2,4-Dioxo-5-thiazolidinyl)methyl]-2-methoxy-N-{[4-(trifluoromethyl)phenyl]= methyl}benzamide

1.1.2006 to 31.12.2008

ex 2934 20 80

4-Chloro-1,3-benzothiazol-2(3H)-one

1.1.2006 to 31.12.2008

ex 2934 20 80

S-(1,3-Benzothiazol-2-yl) (Z)-2-(2-aminothiazol-4-yl)-2-(methoxyimino)thioacetate

1.1.2006 to 31.12.2008

ex 2934 20 80

Benthiavalicarb-isopropyl (ISO)

1.1.2006 to 31.12.2008

ex 2934 99 90

7-Chloro-5-methyl-2H-1,4-benzothiazin-3-(4H)-one

1.1.2006 to 31.12.2008

ex 2934 99 90

Carboxin (ISO)

1.1.2006 to 31.12.2008

ex 2934 99 90

4-[4-(Tridecyl[branched]oxy)phenyl]-1,4-thiazinane 1,1-dioxide

1.1.2006 to 31.12.2008

ex 2934 99 90

Oxycarboxin (ISO)

1.1.2006 to 31.12.2008

ex 2934 99 90

Etridiazole (ISO)

1.1.2006 to 31.12.2008

ex 2934 99 90

Dimethenamide (ISO)

1.1.2006 to 31.12.2008

ex 2934 99 90

2,3,5,6-Tetrahydroxy-1,4-diisobutyl-1,4-dioxo-1,4-diphosphinane

1.1.2006 to 31.12.2008

ex 2934 99 90

Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione

1.1.2006 to 31.12.2008

ex 2934 99 90

1-[2-(1,3-Dioxan-2-yl)ethyl]-2-ethylpyridinium bromide

1.1.2006 to 31.12.2008

ex 2934 99 90

Olmesartan medoxomil (INN)

1.1.2006 to 31.12.2008

ex 2934 99 90

DL-Homocysteine thiolactone hydrochloride

1.1.2006 to 31.12.2008

ex 2934 99 90

Methyl 3-aminothiophene-2-carboxylate

1.1.2006 to 31.12.2008

ex 2934 99 90

1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione

1.1.2006 to 31.12.2008

ex 2934 99 90

N-(5-Mercapto-1,3,4-thiadiazol-2-yl)acetamide

1.1.2006 to 31.12.2008

ex 2934 99 90

Oblimersen sodium (INNM)

1.1.2006 to 31.12.2008

ex 2935 00 90

Salts of sulfathiazole (INN)

1.1.2006 to 31.12.2008

ex 2935 00 90

Flupyrsulfuron-methyl-sodium (ISO)

1.1.2006 to 31.12.2008

ex 2935 00 90

Toluenesulfonamides

1.1.2006 to 31.12.2008

ex 2935 00 90

Triflusulfuron-methyl (ISO)

1.1.2006 to 31.12.2008

ex 2935 00 90

Mixture of isomers consisting of N-ethyltoluene-2-sulfonamide and N-ethyltoluene-4-sulfonamide

1.1.2006 to 31.12.2008

ex 2935 00 90

Chlorsulfuron (ISO)

1.1.2006 to 31.12.2008

ex 2935 00 90

1-(4,6-Dimethoxypyrimidin-2-yl)-3-(2-ethylsulfonylimidazo[1,2-a]pyridin= -3-ylsulfonyl)urea (sulfosulfuron)

1.1.2006 to 31.12.2008

ex 2935 00 90

Rimsulfuron (ISO)

1.1.2006 to 31.12.2008

ex 2935 00 90

4,4'-Oxydi(benzenesulfonohydrazide)

1.1.2006 to 31.12.2008

ex 2935 00 90

Thifensulfuron-methyl (ISO)

1.1.2006 to 31.12.2008

ex 2935 00 90

5-Amino-N-(2,6-dichloro-m-tolyl)-1H-1,2,4-triazole-3-sulfonamide

1.1.2006 to 31.12.2008

ex 2935 00 90

Tribenuron-methyl (ISO)

1.1.2006 to 31.12.2008

ex 2935 00 90

Methyl 3-aminosulfonylthiophene-2-carboxylate

1.1.2006 to 31.12.2008

ex 2935 00 90

Metsulfuron-methyl (ISO)

1.1.2006 to 31.12.2008

ex 2935 00 90

N-(3-Amino-2-hydroxy-4-phenylbutyl)-N-(2-methylpropyl)-4-amino= benzenesulfonamide

1.1.2006 to 31.12.2008

ex 2935 00 90

N-[4-(Isopropylaminoacetyl)phenyl]methanesulfonamide hydrochloride

1.1.2006 to 31.12.2008

ex 2935 00 90

4-(m-Tolylamino)pyridine-3-sulfonamide

1.1.2006 to 31.12.2008

ex 2935 00 90

4'-Sulfamoylacetanilide

1.1.2006 to 31.12.2008

ex 2935 00 90

N-(2-(4-amino-N-ethyl-m-toluidino)ethyl)methanesulfonamide sesquisulfate monohydrate

1.1.2006 to 31.12.2008

ex 2938 90 90

Hesperidin

1.1.2006 to 31.12.2008

3201 20 00

Wattle extract

1.1.2006 to 31.12.2008

ex 3201 90 90

Tanning extracts of eucalyptus

3.2

1.1.2006 to 31.12.2008

ex 3201 90 90

Tanning extracts derived from gambier and myrobalan fruits

1.1.2006 to 31.12.2008

ex 3204 15 00

Dye CI vat orange 7

1.1.2006 to 31.12.2008

ex 3204 15 00

Dye CI vat red 15

1.1.2006 to 31.12.2008

ex 3204 15 00

Dye CI vat red 14

1.1.2006 to 31.12.2008

ex 3204 15 00

Dye CI vat brown 57

1.1.2006 to 31.12.2008

ex 3204 15 00

Dye CI vat blue 47

1.1.2006 to 31.12.2008

ex 3204 17 00

Dye CI pigment yellow 81

1.1.2006 to 31.12.2008

ex 3204 19 00

Nickel bis{4-methoxy-2-[6-(pentafluoroethylthio)benzothiazol-2-ylazo]= -5-(dipropylamino)benzenesulfonate}

1.1.2006 to 31.12.2008

ex 3204 19 00

4-{4-[3-(4-Methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine

1.1.2006 to 31.12.2008

ex 3204 19 00

13-Ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-13-ol

1.1.2006 to 31.12.2008

ex 3204 19 00

Cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate

1.1.2006 to 31.12.2008

ex 3204 19 00

13-Isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-13-ol

1.1.2006 to 31.12.2008

ex 3204 19 00

13-Butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo= [h]indeno[2,1-f]chromene

1.1.2006 to 31.12.2008

ex 3204 19 00

Methyl 8'-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole= - 2,3'-naphtho[2,1-b][1,4]oxazine]-9'-carboxylate

1.1.2006 to 31.12.2008

ex 3204 19 00

6,7-Dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromene

1.1.2006 to 31.12.2008

ex 3204 19 00

Methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate

1.1.2006 to 31.12.2008

ex 3204 19 00

Ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate

1.1.2006 to 31.12.2008

ex 3204 19 00

6-Methoxy-7-morpholino-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene

1.1.2006 to 31.12.2008

ex 3204 19 00

Dye CI solvent red 49

1.1.2006 to 31.12.2008

ex 3204 19 00

6,7-Dimethoxy-13-ethyl-13-methoxy-3,3-bis-(4-methoxyphenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene

1.1.2006 to 31.12.2008

ex 3204 19 00

((R) and (S) isomers of 6,7-Dimethoxy-13-ethyl-13-[2-(2-methoxyethoxy)-ethoxy]-3-(4-methoxyphenyl)-3-(4-fluorophenyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromene

1.1.2006 to 31.12.2008

ex 3205 00 00

Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry (1)

1.1.2006 to 31.12.2008

ex 3206 11 00

Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate

1.1.2006 to 31.12.2008

ex 3206 19 00

Preparation based on titanium dioxide, containing by weight 66 % or more but not more than 71 % of titanium dioxide and 1 % or more but not more than 2 % of isopropoxytitanium triisostearate

1.1.2006 to 31.12.2008

ex 3206 42 00

Lithopone

1.1.2006 to 31.12.2008

ex 3206 49 90

Black preparation of iron-oxide pigments, in liquid form, with a maximum particle size not exceeding 20 nanometres and containing by weight 25 % or more of iron evaluated as Fe2O3, for the manufacture of goods of heading 3304 or 9608 (1)

1.1.2006 to 31.12.2008

3206 50 00

Inorganic products of a kind used as luminophores

1.1.2006 to 31.12.2008

ex 3207 40 80

Glass flakes coated with silver, of an average diameter of 40 (± 10) μm

1.1.2006 to 31.12.2008

ex 3207 40 80

Glass frit, for use in the manufacture of cathode-ray tubes (1)

1.1.2006 to 31.12.2008

ex 3208 10 90

ex 3707 90 90

Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer

1.1.2006 to 31.12.2008

ex 3208 20 10

Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer

1.1.2006 to 31.12.2008

ex 3208 20 10

ex 3905 91 00

Copolymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, partially quaternised by diethyl sulfate, in the form of a solution in ethanol

1.1.2006 to 31.12.2008

ex 3208 20 10

Solution of diundecyl phthalate and a copolymer of dibutyl maleate and isobutyl methacrylate in a hydrocarbon solvent

1.1.2006 to 31.12.2008

ex 3208 90 19

ex 3911 90 99

Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol

1.1.2006 to 31.12.2008

ex 3208 90 19

ex 3902 90 90

Modified, chlorinated polyolefins, whether or not in a solution or dispersion

1.1.2006 to 31.12.2008

ex 3208 90 19

Copolymer of polyurethane and silicone, in the form of a solution in a mixture of butanone, toluene and cyclohexanone, containing by weight 13 % or more but not more than 16 % of copolymer

1.1.2006 to 31.12.2008

ex 3208 90 19

Solution containing:

—	(30 ± 5) % by weight of polyamide resin,

—	((6,5 ± 3,5 ) % by weight of diazonaphthoquinone,

—	(55 ± 5) % by weight of 1-methyl-2-pyrrolidone,

—	1 000 μg/kg or less of chloride,

—	1 000 μg/kg or less of potassium and

—	1 000 μg/kg or less of iron

1.1.2006 to 31.12.2008

ex 3208 90 19

Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane

1.1.2006 to 31.12.2008

ex 3208 90 19

Solution containing by weight:

—	(65 ± 10) % of γ-butyrolactone,

—	(30 ± 10) % of polyamide resin,

—	((3,5 ± 1,5 ) % of naphthoquinone ester derivative and

—	((1,5 ± 0,5 ) % of arylsilicic acid

1.1.2006 to 31.12.2008

ex 3208 90 19

Mixture containing by weight :

—	30 to 45 % polyamide resin;

—	2 to 10 % Diazonaphthoquinone;

—	50 to 65 % γ-Butyrolactone.

1.1.2006 to 31.12.2008

ex 3208 90 99

Solution based on chemically modified natural polymers, containing two or more of the following dyes:

—	methyl 8'-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole= - 2,3'-naphtho[2,1-b][1,4]oxazine]-9'-carboxylate,

—	methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene= - 5-carboxylate,

—	13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-13-ol,

—	ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

—	13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-13-ol

1.1.2006 to 31.12.2008

ex 3208 90 99

Solution based on chemically modified natural polymers, containing two or more of the following dyes:

—	4-[4-(13,13-dimethyl-3-phenyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-3-yl)phenyl]morpholine,

—	4-{4-[3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromen-3-yl]phenyl}morpholine,

—	cyclohexyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

—	ethoxycarbonylmethyl 6-acetoxy-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

—	2-pentyl-7,7-diphenylbenzo[h]chromeno[6,5-d]-1,3-dioxin-4(7H)-one,

—	13-butyl-13-ethoxy-6,11-dimethoxy-3,3-bis(4-methoxyphenyl)-3,13-dihydrobenzo= [h]indeno[2,1-f]chromene,

—	3-(4-methoxyphenyl)-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromene,

—	6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo= [h]indeno[2,1-f]chromene

1.1.2006 to 31.12.2008

ex 3215 11 00

ex 3215 19 00

Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments

1.1.2006 to 31.12.2008

ex 3215 90 80

Ink formulation, for use in the manufacture of ink-jet cartridges (1)

1.1.2006 to 31.12.2008

ex 3215 90 80

Heat-sensitive ink fixed on a plastic film

1.1.2006 to 31.12.2008

ex 3215 90 80

Ink preparation, in the form of powder, for use in the manufacture of ink-filled bottles of a kind used in colour digital presses of heading 8443 (1)

1.1.2006 to 31.12.2008

3301 12 10

Essential oil of orange, not deterpenated

1.1.2006 to 31.12.2008

ex 3402 11 90

Surfactant mixture, of disodium salts of dodecyl (sulphophenoxy)benzenesulphonic acid and oxybis (dodecylbenzenesulphonic acid)

1.1.2006 to 31.12.2008

ex 3402 90 10

Mixture of docusate sodium (INN) and sodium benzoate

1.1.2006 to 31.12.2008

ex 3402 90 10

Non-aqueous surface-active preparation, containing:

—	polyethylene glycol alkylphenyl ether,

—	2,4,7,9-tetramethyldec-5-yne-4,7-diol and

—	phosphoric acid esters

1.1.2006 to 31.12.2008

ex 3402 90 10

Amphoteric fluorinated surfactant in a mixture of water and ethanol, containing by weight 25 % or more but not more than 30 % surfactant.

1.1.2006 to 31.12.2008

ex 3402 90 90

Crystalline powder obtained by the reaction of trisodium phosphate with a mixture of sodium hypochlorite and sodium chloride (chlorinated trisodium phosphate), containing by weight:

—	3,5 % or more of available chlorine, measured iodometrically and

—	17,0 % or more of phosphorus evaluated as P2O5

1.1.2006 to 31.12.2008

ex 3403 99 90

Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides

1.1.2006 to 31.12.2008

ex 3504 00 00

Purified antigens obtained from genetically manipulated yeast cells, for the manufacture of detection tests for hepatitis C (1)

1.1.2006 to 31.12.2008

ex 3504 00 00

Glycoprotein 160 obtained from human immunodeficiency virus, HIV-1 strain

1.1.2006 to 31.12.2008

ex 3505 10 50

O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch

1.1.2006 to 31.12.2008

ex 3506 10 00

Cartridge containing an adhesive based on a mixture of silicon modified polymer and aluminium hydroxide for use in the manufacture of deflection yokes (1)

1.1.2006 to 31.12.2008

ex 3506 91 00

Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)

1.1.2006 to 31.12.2008

ex 3506 91 00

Heat-activated adhesive based on phenolic resin and rubber, in the form of a film on a release paper, for use in the manufacture of brake pads for the automotive industry (1)

1.1.2006 to 31.12.2008

ex 3507 90 90

Asparaginase

1.1.2006 to 31.12.2008

ex 3507 90 90

Enzymatic preparation based on thermolysine

1.1.2006 to 31.12.2008

ex 3507 90 90

Avian myeloblastosis virus (AMV) reverse transcriptase

1.1.2006 to 31.12.2008

ex 3507 90 90

Trypsin certified to be produced in compliance with EC Good Manufacturing Practice (cGMP) and having a specific enzyme activity of 0,45 μkat/mg or more, for the manufacture of goods of heading 3004 (1)

1.1.2006 to 31.12.2008

ex 3507 90 90

Chymotrypsin

1.1.2006 to 31.12.2008

ex 3701 30 00

Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not exceeding 0,8 mm, not covered with a release film, of a total thickness not exceeding 1 mm

1.1.2006 to 31.12.2008

ex 3701 99 00

Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, for the manufacture of masks for the goods of heading 8541 or 8542 (1)

1.1.2006 to 31.12.2008

ex 3702 31 99

Colour negative film, for the manufacture of instant-picture film packs (1)

1.1.2006 to 31.12.2008

ex 3702 43 00

ex 3702 44 00

Photographic film, of a nominal width of 459, 669 or 761 mm, composed of several layers, including two polyester films, a carbon layer, an adhesive layer, whether or not with a layer of a copolymer of styrene with acrylonitrile

1.1.2006 to 31.12.2008

ex 3703 90 10

Paper sheet, coated with silver halide emulsion, for the manufacture of goods of subheading 3701 20 00 (1)

1.1.2006 to 31.12.2008

ex 3707 10 00

Photosensitive emulsion for the sensitization of silicon discs (1)

1.1.2006 to 31.12.2008

ex 3707 10 00

Sensitising emulsion, consisting of diazooxonaphtalenesulphonic acid ester and phenolic resins, containing by weight not more than 12 % of diazooxonaphtalenesulfonic acid ester, in 2-methoxy-1-methylethyl acetate or ethyl lactate

1.1.2006 to 31.12.2008

ex 3707 10 00

Sensitising emulsion, consisting of diazooxonaphthalenesulfonic acid ester and phenolic resins, containing by weight not more than 6 % of diazooxonaphthalenesulfonic acid ester, in 2-methoxy-1-methylethyl acetate

1.1.2006 to 31.12.2008

ex 3707 10 00

Sensitising emulsion containing:

—	phenolic or acrylic resins

—	a maximum 2 % by weight of light sensitive acid precursor,

in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate

1.1.2006 to 31.12.2008

ex 3707 90 30

Toner, in the form of powder, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines or computer printers (1)

1.1.2006 to 31.12.2008

ex 3707 90 30

Toner, based on a polyol resin, in the form of powder

1.1.2006 to 31.12.2008

ex 3707 90 30

Two-component toner, liquid, in the form of a set consisting of a container containing a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments, and a container containing isoparaffins

1.1.2006 to 31.12.2008

ex 3707 90 30

Polyester resin based toner, manufactured by a polymerisation process, for use as a developer in the manufacture of computer printer and copier cartridges (1)

1.1.2006 to 31.12.2008

ex 3707 90 90

Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in the form of a solution in 2-methoxy-1-methylethyl acetate and 1-methoxypropan-2-ol

1.1.2006 to 31.12.2008

ex 3707 90 90

Anti-reflection coating, consisting of a copolymer of hydroxystyrene and methyl methacrylate, modified with chromophore groups, containing by weight not more than 10 % of polymer, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate

1.1.2006 to 31.12.2008

ex 3707 90 90

ex 3824 90 99

Anti-reflection coating, in the form of an aqueous solution, containing by weight:

—	not more than 2 % of perhalogenated sulfonic acid derivatives,

—	not more than 1 % of a vinyl polymer

1.1.2006 to 31.12.2008

ex 3707 90 90

Anti-reflection coating, consisting of amino-resin and modified phenolic resin, in the form of a solution in 1-methoxypropan-2-ol and ethyl lactate, containing by weight 15 % or more but not more than 24 % of both polymers taken together

1.1.2006 to 31.12.2008

ex 3707 90 90

Anti-reflection coating, containing by weight:

—	30 % or more but not more than 40 % of cyclohexanone,

—	30 % or more but not more than 40 % of 1-methyl-2-pyrrolidone,

—	20 % or more but not more than 30 % of tetrahydrofurfuryl alcohol

1.1.2006 to 31.12.2008

ex 3801 20 90

Colloidal graphite in suspension in water, for use as internal coating in colour cathode-ray tubes (1)

1.1.2006 to 31.12.2008

3805 20 00

Pine oil

1,7

1.1.2006 to 31.12.2008

ex 3808 10 90

Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide

1.1.2006 to 31.12.2008

ex 3808 10 90

Preparation containing by weight 2 % or more but not more than 4 % of azadirachtin (ISO), not put up for retail sale

1.1.2006 to 31.12.2008

ex 3808 10 90

Preparation containing endospores and protein crystals derived from the hybrid strain GC 91 of Bacillus thuringiensis Berliner subsp. aizawai and kurstaki

1.1.2006 to 31.12.2008

ex 3808 10 90

Spinosad (ISO)

1.1.2006 to 31.12.2008

ex 3808 20 80

Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale

1.1.2006 to 31.12.2008

ex 3808 20 80

Preparation based on diiodomethyl p-tolyl sulfone, not put up for retail sale

1.1.2006 to 31.12.2008

ex 3808 20 80

Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight 24 % or more but not more than 26 % of pyrithione zinc (INN)

1.1.2006 to 31.12.2008

ex 3808 40 20

Preparation containing by weight:

—	58 % or more but not more than 62 % of 1-bromo-3-chloro-5,5-dimethylhydantoin,

—	26 % or more but not more than 29 % of 1,3-dichloro-5,5-dimethylhydantoin,

—	10 % or more but not more than 12 % of 1,3-dichloro-5-ethyl-5-methylhydantoin,

for the manufacture of swimming-pool disinfectants (1)

1.1.2006 to 31.12.2008

ex 3808 40 90

1-Dodecylguanidine hydrochloride, in the form of a solution in isopropanol and water, containing by weight 40 % or less of 1-dodecylguanidine hydrochloride

1.1.2006 to 31.12.2008

ex 3809 91 00

Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl) methylphosphonate

1.1.2006 to 31.12.2008

ex 3809 92 00

Paper anti-fading agent, consisting of a mixture of magnesium trisilicate and monosodium salt of 2,2'-methylenebis(4,6-di-tert-butylphenyl) phosphate

1.1.2006 to 31.12.2008

ex 3811 21 00

Salts of dinonylnaphthalenesulfonic acid, in the form of a solution in mineral oils

1.1.2006 to 31.12.2008

ex 3811 21 00

Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil

1.1.2006 to 31.12.2008

ex 3811 90 00

Dinonylnaphthylsulphonic acid salt, in the form of a solution in mineral oil, for use as an additive for distillate fuels and lubricating oils (1)

1.1.2006 to 31.12.2008

ex 3812 30 80

Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate

1.1.2006 to 31.12.2008

ex 3812 30 80

Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol

1.1.2006 to 31.12.2008

ex 3814 00 90

Mixture containing by weight 25 % or more but not more than 35 % of dimethyl sulfoxide and 65 % or more but not more than 75 % of monoethanolamine

1.1.2006 to 31.12.2008

ex 3814 00 90

Mixture containing by weight:

—	69 % or more but not more than 71 % of 1-methoxypropan-2-ol,

—	29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate

1.1.2006 to 31.12.2008

ex 3814 00 90

Azeotrope mixture containing by weight 30 % or more but not more than 50 % of trans-dichloroethylene and a mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether

1.1.2006 to 31.12.2008

ex 3814 00 90

Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether

1.1.2006 to 31.12.2008

ex 3815 12 00

Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not exceeding 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver

1.1.2006 to 31.12.2008

ex 3815 12 00

Catalyst, consisting of palladium and rhenium, fixed on a support of active carbon, in the form of powder, containing:

—	0,5 % or more but not more than 1,5 % by weight of palladium,

—	3 % or more but not more than 5 % by weight of rhenium and

—	0,1 mole % or more but not more than 1 mole % of alkaline metals,

for use in the manufacture of tetrahydrofuran (1)

1.1.2006 to 31.12.2008

ex 3815 12 00

Catalyst, consisting of platinum and palladium fixed on a support, containing by weight:

—	not more than 1,5 % of platinum,

—	not more than 1,5 % of palladium and

—	not more than 0,1 % of alkali metals,

for use in hydrogenation of white oils (1)

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst, consisting of chromium trioxide or dichromium trioxide fixed on a support of silicon dioxide, of a pore volume, as determined by the nitrogen absorption method, of 2 cm3/g or more

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile (1)

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst consisting of chromium oxides and titanium dioxide fixed on a support of silicon dioxide, aluminium oxide or aluminium phosphate

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene (1)

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst, in the form of rodlets of a length of 5,5 mm or more but not exceeding 6,5 mm, consisting of copper oxide and zinc oxide fixed on a support of aluminium oxide, containing by weight:

—	55 % or more but not more than 60 % of copper oxide and

—	30 % or more but not more than 35 % of zinc oxide

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst, in the form of spheres of a diameter of 4,2 mm or more but not exceeding 9 mm, consisting of a mixture of metals oxides containing predominantly oxides of molybdenum, vanadium and copper, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid (1)

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst, consisting predominantly of dichromium copper tetraoxide and copper (II) oxide, containing by weight 38 % or more but not more than 48 % of copper, evaluated as copper (II) oxide, fixed on a support of silicon dioxide, for the hydrogenation of acetophenones (1)

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst consisting of organo-metallic compounds of titanium, magnesium and aluminium on a support of silicon dioxide, in the form of a suspension in tetrahydrofuran

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst consisting of a mixture of metal oxides containing chromium trioxide, fixed on a support of silicon dioxide

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst consisting of dichromium trioxide, fixed on a support of aluminium oxide

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder

1.1.2006 to 31.12.2008

ex 3815 19 90

Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins (1)

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, vanadium, nickel and antimony, whether or not mixed with porcelain balls, for use in the manufacture of acrylic acid (1)

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight:

—	20 % or more but not more than 30 % of titanium and

—	55 % or more but not more than 72 % of chlorine

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, consisting of a mixture of oxides containing by weight more than 96 % of oxides of molybdenum, bismuth, nickel, iron and silicon, whether or not mixed with porcelain balls, for use in the manufacture of acrylaldehyde (1)

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, in the form of a powder, containing by weight 82 % or more of copper and of a specific surface of 0,5 m2/g or more but not exceeding 8 m2/g

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, in the form of a suspension in oil, consisting of titanium trichloride and aluminium trichloride, containing by weight (on an oil-free basis):

—	15 % or more but not more than 30 % of titanium and

—	40 % or more but not more than 72 % of chlorine

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, in the form of rodlets of a length of 5 mm or more but not exceeding 8 mm, consisting of a mixture of metals oxides containing predominantly oxides of iron, molybdenum and bismuth, whether or not containing silicon dioxide as filler, for use in the manufacture of acrylic acid (1)

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, in the form of rodlets, consisting of an acid aluminosilicate (zeolite):

—	with a mole-ratio of silicon dioxide: dialuminium trioxide of not less than 500: 1 and

—	containing by weight 0,2 % or more but not more than 0,8 % of platinum

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst based on a mordenite zeolite, in the form of granules, for use in the manufacture of mixtures of methylamines containing by weight 50 % or more of dimethylamine (1)

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, consisting of a mixture of 1,4-diazabicyclo[2.2.2]octane, 2-hydroxyethyliminodi(acetic acid) and dibutyltin di(acetate), containing by weight 5 % or more but not more than 10 % of 1,4-diazabicyclo[2.2.2]octane

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst consisting predominantly of dinonylnaphthalenedisulfonic acid in the form of a solution in isobutanol

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, containing by weight 35 % or more but not more than 55 % of (2-hydroxy-1-methylethyl)trimethylammonium formate and formic acid

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, in the form of powder, containing aluminium magnesium hydroxide hydrate, rare-earth metals oxides and divanadium pentaoxide

1.1.2006 to 31.12.2008

ex 3815 90 90

Powder catalyst containing by weight a minimum 96 % of oxides of copper, chromium and iron

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst based on aluminosilicate (zeolite), for the transalkylation of alkylaromatic hydrocarbons or the oligomerization of olefins (1)

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metals oxides and less than 1 % of disodium oxide

1.1.2006 to 31.12.2008

ex 3815 90 90

Reaction initiator, consisting of diisopropyl peroxydicarbonate, in the form of a solution in diallyl 2,2'-oxydiethyl dicarbonate

1.1.2006 to 31.12.2008

ex 3815 90 90

Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis :

—	4 % or more but not more than 10 % of titanium and

—	10 % or more but not more than 20 % magnesium

1.1.2006 to 31.12.2008

ex 3815 90 90

Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1)

1.1.2006 to 31.12.2008

ex 3817 00 80

Mixture of alkylnaphthalenes, containing by weight:

—	88 % or more but not more than 98 % of hexadecylnaphthalene

—	2 % or more but not more than 12 % of dihexadecylnaphthalene

1.1.2006 to 31.12.2008

ex 3823 19 10

Mixture of fatty acids containing by weight:

—	2 % or more but not more than 6 % of hexanoic acid,

—	53 % or more but not more than 60 % of octanoic acid,

—	34 % or more but not more than 42 % of decanoic acid and

—	not more than 2 % of dodecanoic acid

1.1.2006 to 31.12.2008

ex 3824 90 15

Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets

1.1.2006 to 31.12.2008

ex 3824 90 64

Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora purpurea, whether or not dried

1.1.2006 to 31.12.2008

ex 3824 90 64

Cholic acid and 3α,12α-dihydroxy-5β-cholan-24-oic acid (deoxycholic acid), crude

1.1.2006 to 31.12.2008

ex 3824 90 64

Products obtained by the N-ethylation of sisomycin (INN)

1.1.2006 to 31.12.2008

ex 3824 90 64

Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Micromonospora inyoensis, whether or not dried

1.1.2006 to 31.12.2008

ex 3824 90 64

Residues of manufacture containing by weight 40 % or more of 11β,17,20,21-tetrahydroxy-6-methylpregna-1,4-dien-3-one 21-acetate

1.1.2006 to 31.12.2008

ex 3824 90 64

Mixture of inosine (INN), dimepranol (INN) and acedoben (INN)

1.1.2006 to 31.12.2008

ex 3824 90 99

Colloidal diantimony pentaoxide

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of nitromethane and 1,2-epoxybutane

1.1.2006 to 31.12.2008

ex 3824 90 99

Grains or granules, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight:

—	70 % or more but not more than 78 % of dialuminium trioxide and

—	19 % or more but not more than 26 % of zirconium dioxide

5.2

1.1.2006 to 31.12.2008

ex 3824 90 99

Crude lithium hypochlorite

1.1.2006 to 31.12.2008

ex 3824 90 99

Polysilicate, modified with phosphoric acid, in the form of a solution in a mixture of ethanol, isopropanol and tetrahydrofuran, containing by weight 3 % or more but not more than 6 % of polysilicate

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparation in the form:

—	of powder, containing by weight 75 % or more of zinc bis[3,5-bis(1-phenylethyl)salicylate] or

—	of aqueous dispersion, containing by weight 22 % or more but not more than 55 % of zinc bis[3,5-bis(1-phenylethyl)salicylate]

1.1.2006 to 31.12.2008

ex 3824 90 99

Film consisting of the oxides of either barium or calcium and either titanium or zirconium, mixed with binding materials

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparation consisting essentially of alkaline asphalt sulfonate, of:

—	a specific gravity of 0,9 or more but not exceeding 1,5 and

—	a solubility in water of 70 % by weight or more

1.1.2006 to 31.12.2008

ex 3824 90 99

Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulfonic acid, either:

—	on a support of mineral wax, whether or not modified chemically, or

—	in the form of a solution in an organic solvent

1.1.2006 to 31.12.2008

ex 3824 90 99

Calcined bauxite (refractory grade)

1.1.2006 to 31.12.2008

ex 3824 90 99

Magnetisable iron oxide, in the form of powder, containing by weight:

—	30 % or more but not more than 38 % of bivalent iron in relation to the total iron and

—	1 % or more but not more than 4 % of cobalt

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture containing by weight:

—	7 % or more but not more than 9 % of 2-methyl-1,3-phenylene diisocyanate,

—	31 % or more but not more than 34 % of 4-methyl-1,3-phenylene diisocyanate,

—	10 % or more but not more than 13 % of 2,4'-methylenediphenyl diisocyanate,

—	46 % or more but not more than 49 % of 4,4'-methylenediphenyl diisocyanate

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of magnesium bromide 2-oxoperhydroazepin-1-ide and ε-caprolactam

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of disodium N-benzyloxycarbonyl-L-aspartate and sodium chloride, in the form of a solution in water

1.1.2006 to 31.12.2008

ex 3824 90 99

Disodium 9,10-dihydro-9,10-dioxoanthracene-2,7-disulfonate, containing by weight 10 % or more but not more than 20 % of sodium sulfate

1.1.2006 to 31.12.2008

ex 3824 90 99

Eutectic alloy wholly of potassium and sodium, containing by weight 77 % or more but not more than 79 % of potassium

1.1.2006 to 31.12.2008

ex 3824 90 99

Blend of terephthaloyl dichloride and isophthaloyl dichloride

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:

—	either an aluminium-alkyl compound,

—	or an organic complex of tungsten

—	or an organic complex of molybdenum

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of tris[2-chloro-1-(chloromethyl)ethyl] phosphate and oligomers of methylphosphonic acid and phosphoric acid with ethane-1,2-diol

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of tris[2-chloro-1-(chloromethyl)ethyl] phosphate and oligomers of 2-chloroethyl phosphate with ethane-1,2-diol

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of sucrose esters, derived from the esterification of sucrose with industrial stearic acid

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparations consisting predominantly of phosphabicyclononanes and P-alkyl derivatives thereof, in the form of a solution in 4-tert-butyltoluene

1.1.2006 to 31.12.2008

ex 3824 90 99

Lithium tantalate wafers, undoped

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparation consisting predominantly of ethylene glycol and N,N-dimethylformamide or ethylene glycol and γ-butyrolactone, for the manufacture of electrolytic capacitors (1)

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors (1)

1.1.2006 to 31.12.2008

ex 3824 90 99

2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated

1.1.2006 to 31.12.2008

ex 3824 90 99

Copper zinc ferrite, coated with a silicone resin, in the form of granules of a size not exceeding 120 μm

1.1.2006 to 31.12.2008

ex 3824 90 99

Styrene oligomer

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparation consisting of α-(4-allyloxycarbonylbenzoyl)-ω-allyloxypoly= [oxy(2-methylethylene)oxyterephthaloyl] and either diallyl-2,2'-oxydiethyl dicarbonate or diallyl isophthalate

1.1.2006 to 31.12.2008

ex 3824 90 99

Nitrosylsulfuric acid of a purity by weight of 70 % or more but not exceeding 73 %

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixtures of silanol and diphosphorus pentaoxide, in the form of a solution in a mixture of ethanol and ethyl acetate, containing by weight 6 % or more but not more than 10 % of silanol and 0,1 % or more but not more than 0,3 % of diphosphorus pentaoxide

1.1.2006 to 31.12.2008

ex 3824 90 99

Sintered bauxite pellets, of a diameter not exceeding 2 mm

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid

1.1.2006 to 31.12.2008

ex 3824 90 99

Azelaic acid of a purity by weight of 75 % or more but not exceeding 85 %

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixed metals oxides, in the form of powder, containing by weight:

—	either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,

—	or 30 % or more of lead and 5 % or more of niobium,

for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors (1)

1.1.2006 to 31.12.2008

ex 3824 90 99

7-Aminonaphthalene-1,3,6-trisulfonic acid and its salts, of a purity by weight of 65 % or more

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture containing by weight:

—	60 % or more of 2-[N-(2-cyanoethyl)anilino]ethyl acetate and

—	20 % or more of acetic acid

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparations consisting predominantly of ethylene glycol and:

—	either diethylene glycol, dodecandioic acid and ammonia water,

—	or silicon oxide,

—	or ammonium hydrogen azelate,

—	or ammonium hydrogen azelate and silicon oxide,

—	or dodecandioic acid, ammonia water and silicon oxide,

for the manufacture of electrolytic capacitors (1)

1.1.2006 to 31.12.2008

ex 3824 90 99

Carboxylic acid anhydride based hardener for epoxyde resin, in liquid form, of a specific weight at 25 oC of 1,15 g/cm3 or more but not exceeding 1,18 g/cm3

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixed oxides of metals, in the form of powder, containing by weight:

—	70 % or more but not more than 75 % of iron oxide,

—	10 % or more but not more than 20 % of zinc oxide,

—	10 % or more but not more than 15 % of magnesium oxide,

—	1 % or more but not more than 5 % of manganese oxide and

—	1 % or more but not more than 3 % of copper oxide

1.1.2006 to 31.12.2008

ex 3824 90 99

Zeolites consisting of oxides of barium, aluminium and silicon, containing by weight 30 % or more but not more than 40 % of barium oxide, in the form of spheres of which 80 % or more by weight have a diameter of 0,3 mm or more but not more than 1,2 mm

1.1.2006 to 31.12.2008

ex 3824 90 99

Sodium 4-hydroxynaphthalene-1-sulfonate, of a purity by weight of 70 % or more but not exceeding 80 %

1.1.2006 to 31.12.2008

ex 3824 90 99

2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture containing by weight 75 % or more of pentaerythritol triallyl ether

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of trialkylphosphine oxides

1.1.2006 to 31.12.2008

ex 3824 90 99

Platinum oxide fixed on a porous support of aluminium oxide, containing by weight 0,1 % or more but not more than 1 % of platinum and 0,5 % or more but not more than 5 % of ethylaluminium dichloride

1.1.2006 to 31.12.2008

ex 3824 90 99

α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene)= isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of metal oxides, in the form of powder, containing by weight:

—	20 % or more of barium,

—	10 % or more of titanium and

—	4 % or more of lead or 3 % or more of niobium or 0,7 % or more of zirconium,

for use as dielectric material in the manufacture of multilayer ceramic capacitors (1)

1.1.2006 to 31.12.2008

ex 3824 90 99

Triethylborane, in the form of a solution in tetrahydrofuran

1.1.2006 to 31.12.2008

ex 3824 90 99

Aluminium sodium silicate, in the form of spheres of a diameter of:

—	either 1,6 mm or more but not exceeding 3,4 mm,

—	or 4 mm or more but not exceeding 6 mm

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of tris(alkoxycarbonylamino)-1,3,5-triazines in which alkoxy groups are methoxy and butoxy

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of primary tert-alkylamines

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparation consisting of indium tin oxide dispersed in organic solvents

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparation, in an aqueous solution, of tetramethylammonium hydroxide and a surfactant containing:

—	2,38 % (+/-0,01 ) by weight of tetramethylammonium hydroxide, and

—	a surfactant of 100 to 500 ppm.

1.1.2006 to 31.12.2008

ex 3824 90 99

Solution containing by weight 80 % or more of 2,4,6-trimethylbenzaldehyde in acetone

1.1.2006 to 31.12.2008

ex 3824 90 99

Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of 2,2-bis[2-(perfluoroalkyl)ethylthiomethyl]propane-1,3-diols

1.1.2006 to 31.12.2008

ex 3824 90 99

Diethylmethoxyborane, in the form of a solution in tetrahydrofuran

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparation containing by weight 81 % or more but not more than 89 % bis (3,4-epoxy-cyclohexylmethyl)-adipate

1.1.2006 to 31.12.2008

ex 3824 90 99

Calcium oxide stabilised zirconia in the form of lumps of which 94 % or more by weight is retained on a 16 mm sieve, containing by weight:

—	92 % or more of zirconium dioxide and

—	2 % or more but not more than 6 % of calcium oxide

1.1.2006 to 31.12.2008

ex 3824 90 99

ex 3907 40 00

α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-= 1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture containing:

—	unsaturated, dimerised fatty acids, hydrogenated and polymerised with ethylenediamine and octadecan-1-ol,

—	white oil,

—	2-methylpentane-2,4-diol and

—	glycerides of decanoic and octanoic acids

1.1.2006 to 31.12.2008

ex 3824 90 99

Reaction product, containing by weight:

—	1 % or more but not more than 40 % of molybdenum oxide,

—	10 % or more but not more than 50 % of nickel oxide,

—	30 % or more but not more than 70 % of tungsten oxide

1.1.2006 to 31.12.2008

ex 3824 90 99

Particles of magnesium sodium silicate on which are ionically bonded chiral complexes of tris(1,10-phenanthroline)ruthenium, for use in the manufacture of high performance liquid chromatography columns (HPLC) (1)

1.1.2006 to 31.12.2008

ex 3824 90 99

Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2-chloroethane)

1.1.2006 to 31.12.2008

ex 3824 90 99

Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups

1.1.2006 to 31.12.2008

ex 3824 90 99

Bis{4-[(5-chloro-2-hydroxyphenyl)azo]-3-hydroxy-N-phenyl-2-naphthalene= carboxyamidate}ferrate with a mixture of ammonium, sodium and hydrogen cations

1.1.2006 to 31.12.2008

ex 3824 90 99

Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 42 % or more but not more than 52 % of diallyl 2,2'-oxydiethyl dicarbonate and 33 % or more but not more than 43 % of a copolymer of terephthalic acid, propane-1,2-diol and allyl alcohol

1.1.2006 to 31.12.2008

ex 3824 90 99

Prepared resin, based on diallyl 2,2'-oxydiethyl dicarbonate and oligomers thereof, containing by weight 73 % or more of diallyl 2,2'-oxydiethyl dicarbonate

1.1.2006 to 31.12.2008

ex 3824 90 99

Mixture of phytosterols, in the form of flakes, containing by weight 80 % or more of sterols and not more than 4 % of stanols

1.1.2006 to 31.12.2008

ex 3824 90 99

Zirconium dioxide, stabilised with calcium oxide, in the form of a powder

1.1.2006 to 31.12.2008

ex 3824 90 99

Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents

1.1.2006 to 31.12.2008

ex 3825 69 00

Spent catalyst, in the form of rodlets of diameter of 1 mm or more but not exceeding 3 mm, containing a mixture of sulfides of tungsten and of nickel on a support of zeolite, containing by weight not more than 10 % of tungsten and not more than 10 % of nickel, for regeneration as a catalyst for hydrocarbon cracking (1)

1.1.2006 to 31.12.2008

ex 3901 10 10

Linear polyethylene, of a specific gravity of 0,928 or more but not exceeding 0,935 and of a melt flow index of less than 0,6 g/min, for the manufacture of shrinkmelt binder fibres (1)

1.1.2006 to 31.12.2008

ex 3901 10 90

Polyethylene for the manufacture of photo-resist film for semiconductors or printed circuits (1)

1.1.2006 to 31.12.2008

ex 3901 10 90

Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015 ), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a Haze value not exceeding 6 % and an elongation at break (MD/TD) of 210/340 (1)

1.1.2006 to 31.12.2008

ex 3901 10 90

Polyethylene, in the form of granules, containing by weight 15 % or more of copper, for the purpose of protecting against static charge build up and corrosion

1.1.2006 to 31.12.2008

ex 3901 20 90

Polyethylene, in one of the forms mentioned in note 6(b) to Chapter 39, of a specific gravity of 0,945 or more but not exceeding 0,985 , for the manufacture of films for typewriter ribbon or similar ribbon (1)

1.1.2006 to 31.12.2008

ex 3901 20 90

Polyethylene, containing by weight 35 % or more but not more than 45 % of mica

1.1.2006 to 31.12.2008

ex 3901 20 90

Polyethylene, in one of the forms mentioned in note 6(b) to Chapter 39, of a specific gravity of 0,940 or more but not exceeding 0,943 and a melt flow index of 27 g/10 min (± 5 g/10 min) (MFI 190 oC/2,16 kg as determined by the ISO 1133 method), for the manufacture of bicomponent spunbonded non-wovens (1)

1.1.2006 to 31.12.2008

ex 3901 90 90

Copolymer of ethylene and propylene, modified with maleic anhydride, containing by weight more than 55 % of ethylene and not more than 3 % of maleic anhydride

1.1.2006 to 31.12.2008

ex 3901 90 90

Polyethylene modified with maleic anhydride, containing by weight not more than 4 % of maleic anhydride, for use in the manufacture of fuel tanks for motor vehicles (1)

1.1.2006 to 31.12.2008

ex 3901 90 90

Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid

1.1.2006 to 31.12.2008

ex 3901 90 90

Chlorosulphonated polyethylene

1.1.2006 to 31.12.2008

ex 3901 90 90

Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets (1)

1.1.2006 to 31.12.2008

ex 3901 90 90

Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene

1.1.2006 to 31.12.2008

ex 3901 90 90

ex 3902 90 90

Copolymer of ethylene and butylene, having hydroxyl or acrylate end-groups, containing by weight 40 % or more but not more than 60 % of butylene

1.1.2006 to 31.12.2008

ex 3901 90 90

ex 3902 90 90

ex 3903 90 90

Linear A-B block copolymer of polyisoprene, whether or not epoxidised, and either ethylene-butylene copolymer or styrene-ethylene-butylene copolymer, having hydroxyl end-groups

1.1.2006 to 31.12.2008

ex 3901 90 90

Chlorinated polyethylene, in the form of powder

1.1.2006 to 31.12.2008

ex 3902 10 00

Polypropylene containing no plasticiser and not more than:

—	7 mg/kg of aluminium,

—	2 mg/kg of iron,

—	1 mg/kg of magnesium,

—	8 mg/kg of chloride

1.1.2006 to 31.12.2008

ex 3902 10 00

Polypropylene, containing no plasticiser,

—	of a melting point of more than 150 oC (as determined by the ASTM D 3417 method),

—	of a heat of fusion of 15 J/g or more but not exceeding 70 J/g,

—	of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method),

—	of a tensile modulus of 69 MPa or more but not exceeding 379 MPa (as determined by the ASTM D 638 method)

1.1.2006 to 31.12.2008

ex 3902 10 00

Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses (1)

1.1.2006 to 31.12.2008

ex 3902 20 00

Polyisobutylene, of an average molecular weight (Mn) of 700 or more but not exceeding 800

1.1.2006 to 31.12.2008

ex 3902 30 00

ex 3903 90 90

A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6(b) to Chapter 39

1.1.2006 to 31.12.2008

ex 3902 30 00

Chlorinated polypropylene, chemically modified with maleic anhydride, containing by weight 23 % or more but not more than 26 % of chlorine and less than 5 % of epoxy resin

1.1.2006 to 31.12.2008

ex 3902 90 90

Polymers of 4-methylpent-1-ene

1.1.2006 to 31.12.2008

ex 3902 90 90

Hydrogenated polyisobutene, in liquid form

1.1.2006 to 31.12.2008

ex 3903 19 00

Polystyrene of a molecular weight (Mn) not exceeding 5 000

1.1.2006 to 31.12.2008

ex 3903 90 90

Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, whether or not containing a styrene-butadiene block copolymer, in one of the forms mentioned in note 6(b) to Chapter 39, for the manufacture of sheetings for head-liners for cars (1)

1.1.2006 to 31.12.2008

ex 3903 90 90

Copolymer, entirely of styrene with maleic anhydride, or entirely of styrene with maleic anhydride and an acrylic monomer, also partially esterified, of an average molecular weight (Mn) not exceeding 3 000 , in one of the forms mentioned in note 6(a) and (b) to Chapter 39

1.1.2006 to 31.12.2008

ex 3903 90 90

Copolymer of styrene with 2-ethylhexyl acrylate or with n-butyl acrylate, containing:

—	10 mole % or more but not more than 16 mole % of acrylate,

—	0,2 mg/kg or less of sodium and

—	0,1 mg/kg or less of calcium

1.1.2006 to 31.12.2008

ex 3903 90 90

ex 3911 90 99

Copolymer of α-methylstyrene and styrene, having a softening point exceeding 113 oC

1.1.2006 to 31.12.2008

ex 3903 90 90

ex 3906 90 90

ex 3911 90 99

Copolymer of styrene with α-methylstyrene and acrylic acid, of a molecular weight (Mn) of 500 or more but not exceeding 6 000

1.1.2006 to 31.12.2008

ex 3903 90 90

ex 3906 90 90

Copolymer of styrene, methyl methacrylate, butyl acrylate and either acrylic acid or hydroxyethyl methacrylate, of a molecular weight (Mn) of 500 or more but not exceeding 6 000

1.1.2006 to 31.12.2008

ex 3903 90 90

Copolymer of styrene, butyl acrylate, butyl methacrylate, methyl methacrylate and acrylic acid, in the form of powder, containing by weight (81 ± 1) % of styrene, (6 ± 1) % of butyl acrylate, (5 ± 1) % of butyl methacrylate, (7 ± 1) % of methyl methacrylate and (1 ± 0,5 ) % of acrylic acid

1.1.2006 to 31.12.2008

ex 3903 90 90

Ammonium polystyrenesulfonate, in the form of an aqueous solution

1.1.2006 to 31.12.2008

ex 3903 90 90

Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1 % of sodium dodecyl sulfate, in the form of an aqueous emulsion, for the manufacture of goods of subheading 3305 20 00 or of hair dyes of subheading 3305 90 90 (1)

1.1.2006 to 31.12.2008

ex 3903 90 90

Granules of copolymer of styrene and divinylbenzene a minimum diameter of 150 μm and a maximum 800 μm and containing by weight :

—	minimum 65 % styrene,

—	maximum 25 % divinylbenzene

for use in the manufacture of ion exchange resins (1)

1.1.2006 to 31.12.2008

ex 3904 22 00

ex 3926 90 98

Poly(vinyl chloride), dyed in the mass, in the form of flakes, grains, pebbles or rectangular chips, for use as decorative elements in floor and wall coverings (1)

1.1.2006 to 31.12.2008

ex 3904 30 00

Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight:

—	81,5 % or more but not more than 84,5 % of vinyl chloride,

—	13,8 % or more but not more than 16,2 % of vinyl acetate and

—	0,8 % or more but not more than 1,2 % of maleic acid,

for the manufacture of goods of heading 3215 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1)

1.1.2006 to 31.12.2008

ex 3904 30 00

Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight:

—	80,5 % or more but not more than 81,5 % of vinyl chloride,

—	16,5 % or more but not more than 17,5 % of vinyl acetate and

—	1,5 % or more but not more than 2,5 % of maleic acid,

for use in heat-sealing of plastics onto steel substrate for industrial uses (1)

1.1.2006 to 31.12.2008

ex 3904 40 00

Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:

—	87 % or more but not more than 92 % of vinyl chloride,

—	2 % or more but not more than 9 % of vinyl acetate and

—	1 % or more but not more than 8 % of vinyl alcohol,

in one of the forms mentioned in note 6(a) or (b) to Chapter 39, for the manufacture of goods of heading 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1)

1.1.2006 to 31.12.2008

ex 3904 40 00

Copolymer of vinyl chloride, vinyl acetate, hydroxypropyl acrylate and maleic acid, containing by weight 80 % or more but not more than 83 % of vinyl chloride, 1,6 % or more but not more than 2 % of hydroxy groups and 0,25 % or more but not more than 0,38 % of carboxyl groups

1.1.2006 to 31.12.2008

ex 3904 40 00

Copolymer of vinyl chloride and methyl acrylate, containing by weight (80 ± 1) % of vinyl chloride and (20 ± 1) % of methyl acrylate, in the form of a aqueous emulsion

1.1.2006 to 31.12.2008

ex 3904 50 90

Copolymer of vinylidene chloride with vinyl chloride, containing by weight 79,5 % or more of vinylidene chloride, in one of the forms mentioned in note 6(a) or (b) to Chapter 39, for the manufacture of fibres, monofilament or strip (1)

1.1.2006 to 31.12.2008

ex 3904 61 00

Mixture of polytetrafluoroethylene and mica, in one of the forms mentioned in note 6(b) to Chapter 39

1.1.2006 to 31.12.2008

ex 3904 61 00

Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions

1.1.2006 to 31.12.2008

ex 3904 61 00

Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not exceeding 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm

1.1.2006 to 31.12.2008

ex 3904 69 90

Copolymer of tetrafluoroethylene and trifluoro(trifluoromethoxy)ethylene

1.1.2006 to 31.12.2008

ex 3904 69 90

Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6(b) to Chapter 39

1.1.2006 to 31.12.2008

ex 3904 69 90

Copolymer of ethylene and tetrafluoroethylene

1.1.2006 to 31.12.2008

ex 3904 69 90

Polychlorotrifluoroethylene, in one of the forms mentioned in note 6(a) and (b) to Chapter 39

1.1.2006 to 31.12.2008

ex 3904 69 90

Copolymer of chlorotrifluoroethylene and vinylidene difluoride

1.1.2006 to 31.12.2008

ex 3905 29 00

Copolymer of vinyl acetate, dibutyl maleate and acrylic acid, in the form of a solution in isopropyl acetate and toluene

1.1.2006 to 31.12.2008

ex 3905 91 00

Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate

1.1.2006 to 31.12.2008

ex 3905 99 90

Poly(vinyl acetate phthalate)

1.1.2006 to 31.12.2008

ex 3905 99 90

Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water

1.1.2006 to 31.12.2008

ex 3905 99 90

Hexadecylated or eicosylated polyvinylpyrrolidone

1.1.2006 to 31.12.2008

ex 3905 99 90

Polymer of vinyl formal, in one of the forms mentioned in note 6(b) to Chapter 39, of a molecular weight (Mw) of 25 000 or more but not exceeding 150 000 and containing by weight:

—	9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and

—	5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol

1.1.2006 to 31.12.2008

ex 3905 99 90

Povidone (INN)-iodine

1.1.2006 to 31.12.2008

ex 3905 99 90

Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups

1.1.2006 to 31.12.2008

ex 3906 10 00

Poly(methyl methacrylate), in the form of expansible beads containing 2-methylpentane as blowing agent

1.1.2006 to 31.12.2008

3906 90 60

Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide

1.1.2006 to 31.12.2008

ex 3906 90 90

Polymerisation product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004 (1)

1.1.2006 to 31.12.2008

ex 3906 90 90

Polymerisation product of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 (1)

1.1.2006 to 31.12.2008

ex 3906 90 90

Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a molecular weight (Mn) of 500 or more but not exceeding 6 000

1.1.2006 to 31.12.2008

ex 3906 90 90

Polymers of esters of acrylic acid with one or more of the following monomers in the chain:

—	chloromethyl vinyl ether,

—	chloroethyl vinyl ether,

—	chloromethylstyrene,

—	vinyl chloroacetate,

—	methacrylic acid,

—	butenedioic acid monobutyl ester,

containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6(b) to Chapter 39

1.1.2006 to 31.12.2008

ex 3906 90 90

Mixtures containing copolymers of methyl acrylate and ethylene and polyether-ester copolymers containing terephthalic acid, in the form of granules or pellets

1.1.2006 to 31.12.2008

ex 3906 90 90

Copolymer of butyl acrylate and vinyl chloride, containing by weight (58 ± 1) % of butyl acrylate and (42 ± 1) % of vinyl chloride, in the form of a aqueous emulsion

1.1.2006 to 31.12.2008

ex 3906 90 90

Copolymer of ethylene dimethacrylate with either methyl methacrylate or dodecyl methacrylate

1.1.2006 to 31.12.2008

ex 3906 90 90

Copolymer of N-[4,5-dihydro-5-oxo-1-(2,4,6-trichlorophenyl)(1',4-bi-1H-pyrazol)-3-yl]= methacrylamide, butyl acrylate and styrene, in the form of powder

1.1.2006 to 31.12.2008

ex 3906 90 90

Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates)

1.1.2006 to 31.12.2008

ex 3906 90 90

Non-aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends

1.1.2006 to 31.12.2008

ex 3907 20 11

Poly(ethylene oxide) of an average molecular weight (Mn) of 100 000 or more

1.1.2006 to 31.12.2008

ex 3907 20 21

Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone

1.1.2006 to 31.12.2008

ex 3907 20 29

Polymer of dextrose, sorbitol and citric or phosphoric acid, containing by weight 90 % or more of dextrose monomer units

1.1.2006 to 31.12.2008

ex 3907 20 29

Poly[oxy-1,4-phenyleneisopropylidene-1,4-phenyleneoxy-(2-hydroxytrimethylene)], of an average molecular weight (Mw) of more than 26 000 , in one of the forms mentioned in note 6 (b) to Chapter 39

1.1.2006 to 31.12.2008

ex 3907 20 99

Bis{2-[ω-hydroxy-poly(ethyleneoxy)]ethyl} hydroxymethylphosphonate

1.1.2006 to 31.12.2008

ex 3907 20 99

Poly(oxypropylene) having alkoxysilyl end-groups

1.1.2006 to 31.12.2008

ex 3907 20 99

Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)

1.1.2006 to 31.12.2008

ex 3907 20 99

Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate

1.1.2006 to 31.12.2008

ex 3907 20 99

Polydimethylsiloxane grafted with a poly(ethylene oxide) having C20 and C22 fatty acids ester end-groups

1.1.2006 to 31.12.2008

ex 3907 20 99

Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups

1.1.2006 to 31.12.2008

ex 3907 20 99

Copolymer of ethylene oxide and propylene oxide, having 2-aminopropyl end-groups

1.1.2006 to 31.12.2008

ex 3907 30 00

Epoxyde resin in the form of powder, containing by weight 44 % or more but not more than 55 % of quartz and 0,5 % or more but not more than 1 % of diantimony trioxide, for the coating of film capacitors (1)

1.1.2006 to 31.12.2008

ex 3907 30 00

Epoxyde resin, without solvent, containing mineral fillers (silica), without glass fibre, of a specific weight at 25 oC of 1,55 g/cm3 or more but not exceeding 1,60 g/cm3

1.1.2006 to 31.12.2008

ex 3907 30 00

ex 3916 90 15

ex 3926 90 98

Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533 , 8535 , 8536 , 8541 , 8542 or 8548 (1)

1.1.2006 to 31.12.2008

ex 3907 40 00

Copolymer of hexane-1,6-diol, cyclohexane-1,4-dimethanol and ethylene carbonate

1.1.2006 to 31.12.2008

ex 3907 60 80

Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol

1.1.2006 to 31.12.2008

ex 3907 60 80

Oxygen binding copolymer (as determined by the ASTM D 1434 and 3985 methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups

1.1.2006 to 31.12.2008

ex 3907 91 90

Diallyl phthalate prepolymer, in the form of powder

1.1.2006 to 31.12.2008

ex 3907 99 19

ex 3907 99 99

Poly(oxy-1,4-phenylenecarbonyl), in the form of powder

1.1.2006 to 31.12.2008

ex 3907 99 19

Liquid crystal copolyester with a melting point of not less than 270 oC, whether or not containing fillers

1.1.2006 to 31.12.2008

ex 3907 99 19

Poly(lactic acid)

1.1.2006 to 31.12.2008

ex 3908 90 00

Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6(b) to Chapter 39

1.1.2006 to 31.12.2008

ex 3908 90 00

Copolymer consisting of hexamethylenediamine, isophthalic acid and terephthalic acid, in one of the forms mentioned in note 6(b) to Chapter 39

1.1.2006 to 31.12.2008

ex 3908 90 00

Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine

1.1.2006 to 31.12.2008

ex 3908 90 00

Thermoplastic polyamide resin having a fire point of more than 750 oC, for use in the manufacture of deflection yokes of cathode ray tubes (1)

1.1.2006 to 31.12.2008

ex 3909 40 00

Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm

1.1.2006 to 31.12.2008

ex 3910 00 00

3-[(2-Aminoethyl)amino]propyl(methyl)cyclosiloxane

1.1.2006 to 31.12.2008

ex 3910 00 00

Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]

1.1.2006 to 31.12.2008

ex 3911 90 19

Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4'-biphenylene)

1.1.2006 to 31.12.2008

ex 3911 90 99

Copolymer of vinyltoluene and α-methylstyrene

1.1.2006 to 31.12.2008

ex 3911 90 99

Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight

1.1.2006 to 31.12.2008

ex 3911 90 99

Copolymer of maleic acid and methyl vinyl ether

1.1.2006 to 31.12.2008

ex 3911 90 99

Solution containing:

—	(36 ± 0,5 ) % by weight of polyamide with lateral ester groups,

—	(2 ± 0,5 ) % by weight of acrylic ester,

—	(48 ± 0,5 ) % by weight of 1-methyl-2-pyrrolidone,

—	(12 ± 0,5 ) % by weight of bis(2-methoxyethyl) ether,

—	500 μg/kg or less of potassium and

—	500 μg/kg or less of iron,

for use in the manufacture of goods of heading 8542 (1)

1.1.2006 to 31.12.2008

ex 3911 90 99

Hydrocarbon prepolymer, obtained by the reaction of cyclopentadiene and 1,3-pentadiene

1.1.2006 to 31.12.2008

ex 3911 90 99

Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether

1.1.2006 to 31.12.2008

ex 3911 90 99

ex 3926 90 98

Microspheres of a copolymer of divinylbenzene and styrene, of an average diameter of 220 μm or more but not exceeding 575 μm

1.1.2006 to 31.12.2008

ex 3911 90 99

Poly[(8-methyl-8-methoxycarbonyltricyclo[5.2.1.02 , 6]decane-3,5-diyl)ethylene]

1.1.2006 to 31.12.2008

ex 3911 90 99

Polymer of ethylene and styrene, cross-linked with divinylbenzene, in the form of a suspension

1.1.2006 to 31.12.2008

ex 3912 11 00

Non-plasticised cellulose triacetate, in the form of flakes, for the manufacture of cellulose triacetate yarn (1)

1.1.2006 to 31.12.2008

ex 3912 39 10

Ethylcellulose, not plasticised

1.1.2006 to 31.12.2008

ex 3912 39 10

Ethylcellulose, in the form of aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulfate, containing by weight (27 ± 3) % of ethylcellulose

1.1.2006 to 31.12.2008

ex 3912 39 80

Cellulose, both hydroxyethylated and ethylated, insoluble in water

1.1.2006 to 31.12.2008

ex 3912 39 80

Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms

1.1.2006 to 31.12.2008

ex 3912 90 10

Cellulose acetate propionate, non-plasticised, in the form of powder:

—	containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method) and

—	of a viscosity not exceeding 120 poise (as determined by the ASTM D 817-72 method),

for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings (1)

1.1.2006 to 31.12.2008

ex 3913 90 00

Protein, chemically modified by carboxylation and/or phthalic acid addition, having a molecular weight of 100 000 to 300 000

1.1.2006 to 31.12.2008

ex 3913 90 00

Chondroitinsulfuric acid, sodium salt

1.1.2006 to 31.12.2008

ex 3913 90 00

Chitosonium pyrrolidonecarboxylate

1.1.2006 to 31.12.2008

ex 3913 90 00

Sodium hyaluronate

1.1.2006 to 31.12.2008

ex 3915 90 90

Waste, parings and scrap of photographic, cinematographic and radiographic films

1.1.2006 to 31.12.2008

ex 3916 90 90

Composite profile shape, reinforced with glass fibres, produced by pultrusion, for the manufacture of window frames (1)

1.1.2006 to 31.12.2008

ex 3917 32 10

Flexible pipe of silicone foam, with continuous channels, of a Shore A hardness of 7 or more but not exceeding 48 and a density of 0,28 g/cm3 or more but not exceeding 0,92 g/cm3

1.1.2006 to 31.12.2008

ex 3917 32 31

ex 3917 32 99

ex 3926 90 98

Assembly of heat-shrinkable tubing of polyethylene with poly(vinyl acetate), arranged in parallel at equally spaced intervals and attached at one or both ends by perforated plastic strips, in rolls

1.1.2006 to 31.12.2008

ex 3917 32 39

Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not exceeding 110 μm

1.1.2006 to 31.12.2008

ex 3919 10 19

ex 3919 10 38

ex 3919 90 38

ex 3920 99 28

Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

1.1.2006 to 31.12.2008

ex 3919 10 31

ex 3919 10 38

ex 3919 90 31

ex 3920 61 00

Reflecting laminated sheet, consisting of a film of polycarbonate totally embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material, whether or not covered on one side with an adhesive layer and a release sheet

1.1.2006 to 31.12.2008

ex 3919 10 38

Self-adhesive tape of metallised polyurethane containing glass beads for use in the manufacture of marine life-saving equipment (1)

1.1.2006 to 31.12.2008

ex 3919 10 38

Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 16 cm wide, 140 to 200 m long and with a total thickness of 20 μm, not for retail sale

1.1.2006 to 31.12.2008

ex 3919 10 61

ex 3919 90 61

Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

1.1.2006 to 31.12.2008

ex 3919 10 69

ex 3919 90 69

Black acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90o of more than 25 N/cm (as determined by the ASTM D 3330 method)

1.1.2006 to 31.12.2008

ex 3919 10 69

ex 3919 90 69

Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet

1.1.2006 to 31.12.2008

ex 3919 90 10

Shaped sheet of plastic, with an adhesive layer containing polyisobutylene and pectin, for the manufacture of colostomy bags (1)

1.1.2006 to 31.12.2008

ex 3919 90 31

Polyethylene terephthalate film:

—	laminated on one side with a copper mesh of a line width of 10 to 15 μm,

—	a coloured adhesive layer on the other,

—	coated on both sides with a protective film,

—	with a total thickness of 110 to 210 μm

for use in the manufacture of optical filters (1)

1.1.2006 to 31.12.2008

ex 3919 90 31

Polyethylene terephthalate film, covered on one side with a tinted layer and on the other with an adhesive layer, coated on both sides with a protective film, with an overall thickness of 235 (± 5) μm, for the manufacture of optical filters (1)

1.1.2006 to 31.12.2008

ex 3919 90 31

ex 3920 62 19

ex 3920 62 90

ex 3920 63 00

ex 3920 69 00

Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers (1)

1.1.2006 to 31.12.2008

ex 3919 90 31

Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner

1.1.2006 to 31.12.2008

ex 3919 90 31

Poly(ethylene terephthalate) sheet, covered on one side with an antistatic layer and a hardcoat layer and on the other side with an adhesive layer and a release sheet, in rolls, for the manufacture of optical filters (1)

1.1.2006 to 31.12.2008

ex 3919 90 61

ex 3919 90 69

Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter not exceeding 100 μm

1.1.2006 to 31.12.2008

ex 3919 90 61

ex 3919 90 69

ex 3920 10 89

Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for the protection of the surface of silicon discs (1)

1.1.2006 to 31.12.2008

ex 3919 90 69

ex 3920 51 00

Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, whether or not covered on one side with an adhesive layer and a release sheet

1.1.2006 to 31.12.2008

ex 3920 10 26

Film of polyethylene, of a thickness of 20 μm or more but not exceeding 45 μm, containing calcium carbonate in the mass, for the manufacture of napkins for babies or of sanitary towels or of tampons or of disposable surgical gowns (1)

1.1.2006 to 31.12.2008

ex 3920 10 26

ex 3920 10 89

Film of a thickness not exceeding 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanised rubber (1)

1.1.2006 to 31.12.2008

ex 3920 10 26

Film of polyethylene, of a kind used for typewriter ribbon

1.1.2006 to 31.12.2008

ex 3920 10 40

Synthetic paper pulp, in the form of moist sheets, made from unconnected finely-branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent

1.1.2006 to 31.12.2008

ex 3920 10 40

Laminated sheet or strip consisting of a film composed of a blend of a copolymer of ethylene with vinyl acetate and a modified ethylene-propylene-elastomer (EPM) or a modified ethylene-propylene-diene elastomer (EPDM), coated or covered on both sides with a film of a copolymer of ethylene with vinyl acetate

1.1.2006 to 31.12.2008

ex 3920 10 89

Reflecting film, consisting of a layer of polyethylene, a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, a hot-melt adhesive layer, covered on one side or on both sides with a release film

1.1.2006 to 31.12.2008

ex 3920 20 21

Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm.

1.1.2006 to 31.12.2008

ex 3920 20 29

Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having:

—	a thickness of 55 μm or more but not exceeding 97 μm,

—	a tensile modulus in the machine direction of 0,75 GPa or more but not exceeding 1,45 GPa and

—	a tensile modulus in the transverse direction of 0,20 GPa or more but not exceeding 0,55 GPa

1.1.2006 to 31.12.2008

ex 3920 20 90

Synthetic paper pulp, in the form of moist sheets, made from unconnected finely-branched polypropylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent

1.1.2006 to 31.12.2008

ex 3920 20 90

Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not exceeding 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester

1.1.2006 to 31.12.2008

ex 3920 20 90

Polypropylene sheet, of a thickness of 0,5 mm or more but not exceeding 1,0 mm, having a tensile strength at break of 14,7 MPa or more but not exceeding 21 MPa (as determined by the ASTM D 638 method), in rolls of a width of 3,81 m

1.1.2006 to 31.12.2008

ex 3920 30 00

Laminated sheet or strip, consisting of a film composed of a blend of a thermoplastic elastomer (TPE) of styrene-butadiene-styrene (SBS) with polyethylene or polypropylene, of a thickness of 100 μm or more but not exceeding 200 μm, coated or covered on both sides with a film of polypropylene of a thickness not exceeding 20 μm

1.1.2006 to 31.12.2008

ex 3920 43 10

ex 3920 49 10

Reflecting sheeting, consisting solely of a single layer of poly(vinyl chloride), wholly embossed on one side in a regular pyramidal pattern

1.1.2006 to 31.12.2008

ex 3920 43 10

Sheeting of poly(vinyl chloride), stabilised against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not exceeding 80 μm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride)

1.1.2006 to 31.12.2008

ex 3920 43 10

Poly(vinyl chloride) sheet, with relief printing, of a kind used in the templates for textile printing

1.1.2006 to 31.12.2008

ex 3920 43 10

ex 3920 49 10

Film of a specular gloss of 70 or more, measured at an angle of 60o using a glossmeter (as determined by the ISO 2813: 2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not exceeding 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1 000 mm or more but not exceeding 1 450 mm, for use in the manufacture of goods of heading 9403 (1)

1.1.2006 to 31.12.2008

ex 3920 43 10

ex 3920 49 10

Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet

1.1.2006 to 31.12.2008

ex 3920 43 10

Film, of a specular gloss of 70 or more measured at an angle of 60o using a glossmeter (as determined by the ISO 2813: 2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), for coating panels and doors of a kind used in the manufacture of domestic appliances (1)

1.1.2006 to 31.12.2008

ex 3920 43 10

Film embossed to a depth of not more than 12 μm, of a specular gloss of 7 or more but not exceeding 17, measured at an angle of 60o using a glossmeter (as determined by the ISO 2813: 2000 method), consisting of at least two layers of poly(vinyl chloride), of a total thickness not exceeding 0,5 mm, covered on the embossed side with a protective film, in rolls of a width of 1 400 mm or more but not exceeding 1 420 mm, for use in the manufacture of goods of heading 9403 (1)

1.1.2006 to 31.12.2008

ex 3920 51 00

Poly(methyl methacrylate) plate, with an antistatic coating, of dimensions of 738 × 972 mm (± 1,5 mm)

1.1.2006 to 31.12.2008

ex 3920 51 00

Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not exceeding 19 mm

1.1.2006 to 31.12.2008

ex 3920 61 00

Polycarbonate film of a thickness not exceeding 15 μm, for the manufacture of film capacitors (1)

1.1.2006 to 31.12.2008

ex 3920 62 19

Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not exceeding 350 μm, consisting especially of a layer containing carbon black

1.1.2006 to 31.12.2008

ex 3920 62 19

Poly(ethylene terephthalate) film, of a thickness of less than 11 μm, for the manufacture of audiodigital tapes for cassettes (1)

1.1.2006 to 31.12.2008

ex 3920 62 19

Poly(ethylene terephtalate) film, not coated with an adhesive, of a thickness not exceeding 25 μm, either:

—	only dyed in the mass, or

—	dyed in the mass and metallised on one side

1.1.2006 to 31.12.2008

ex 3920 62 19

Film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material

1.1.2006 to 31.12.2008

ex 3920 62 19

Poly(ethylene terephthalate) film, of a thickness of 20 μm or more but not exceeding 30 μm, coated on one side with silicone, for use in the manufacture of window film (1)

1.1.2006 to 31.12.2008

ex 3920 62 19

Laminated film of poly(ethylene terephthalate) only, of a total thickness not exceeding 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material

1.1.2006 to 31.12.2008

ex 3920 62 19

Film of poly(ethylene terephthalate), coated or covered on one side or on both sides with a layer of modified polyester, of a total thickness of 7 μm or more but not exceeding 11 μm, for the manufacture of video tapes with a magnetic layer of metallic pigments and a width of 8 mm or of 12,7 mm (1)

1.1.2006 to 31.12.2008

ex 3920 62 19

Single ply film of poly(ethylene terephthalate) only, of a thickness not exceeding 120 μm, which only:

—	contains a colouring and/or UV-absorbing material throughout the mass and

—	is metallised on one side,

whether or not coated on one or both sides with a vinyl acrylate polymer but having no other coating or adhesive

1.1.2006 to 31.12.2008

ex 3920 62 19

Film of poly(ethylene terephthalate), of a total thickness not exceeding 120 μm, of a width of 100 mm or more but not exceeding 115 mm, coated on both sides with one or more layers containing different chemicals, for the manufacture of goods of subheading 3701 20 00 (1)

1.1.2006 to 31.12.2008

ex 3920 62 19

Film of poly(ethylene terephthalate), on one side metallised and coated with white ink and a protective layer and on the other side coated with a thermosensitive seal layer, of a width of 100 mm or more but not exceeding 150 mm, for the manufacture of goods of subheading 3701 20 00 (1)

1.1.2006 to 31.12.2008

ex 3920 62 19

Film of poly(ethylene terephthalate), coated on one side with a layer of modified polyester, of a thickness of 20 μm (± 0,7 μm) or of 30 μm (± 0,9 μm), for the manufacture of audio magnetic tapes of a total thickness of 33 μm or more (1)

1.1.2006 to 31.12.2008

ex 3920 62 19

Poly(ethylene terephthalate) film, of a thickness not exceeding 12 μm, coated on one side with a layer of aluminium oxide of a thickness not exceeding 35 nm

1.1.2006 to 31.12.2008

ex 3920 62 19

Poly(ethylene terephthalate) film, of a thickness of 18 μm or more but not exceeding 25 μm, having:

—	a shrinkage of ((3,4 ± 0,1 ) % in the machine direction (as determined by the ASTM D 1204 method) and

—	a shrinkage of ((0,3 ± 0,2 ) % in the transverse direction (as determined by the ASTM D 1204 method)

1.1.2006 to 31.12.2008

ex 3920 62 19

Poly(ethylene terephthalate) film, of a thickness not exceeding 19 μm or of a weight of 20 g/m2 or more but not exceeding 26,7 g/m2, for use in the manufacture of photo-resist film (1)

1.1.2006 to 31.12.2008

ex 3920 62 19

Film of poly(ethylene terephthalate), coated on both sides with a layer of epoxy acrylic resin, of a total thickness of 37 μm (± 3 μm)

1.1.2006 to 31.12.2008

ex 3920 62 19

Film of poly(ethylene terephthalate), coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness not exceeding 300 μm and having a surface resistivity not exceeding 10 000 ohms (per square) (as determined by the ASTM D 257-93 method)

1.1.2006 to 31.12.2008

ex 3920 62 19

Matt film of poly(ethylene terephthalate), of a specular gloss of 15 measured at an angle of 45o and 18 measured at an angle of 60o using a glossmeter (as determined by the ISO 2813: 2000 method) and a width of 1 600 mm or more

1.1.2006 to 31.12.2008

ex 3920 62 19

Film of white poly(ethylene terephthalate), dyed in the mass, of a thickness of 185 μm or more but not exceeding 253 μm, coated on both sides with an antistatic layer

1.1.2006 to 31.12.2008

ex 3920 62 19

Film of a total thickness of 4,5 μm (± 0,16 μm), consisting of a biaxially-oriented poly(ethylene terephthalate) film, of an elastic modulus (in the machine direction) of 12 kg/mm2 (± 2 kg/mm2) and a tensile strength (in the machine direction) of more than 28 kg/mm2, and of an anti-adherent coating

1.1.2006 to 31.12.2008

ex 3920 62 19

Poly(ethylene terephthalate) film, coated with among other a scratch resistant layer based on polyacrylate and a thermoadhesive layer, of a nominal width of 790 mm and a total thickness of 23 μm or more but not exceeding 26 μm

1.1.2006 to 31.12.2008

ex 3920 62 19

ex 3920 69 00

Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) or poly(ethylene naphthalate) and multiple layers of poly(methyl methacrylate), of a reflectance coefficient of 95 % or more (as determined by the ASTM E 1164-94 and ASTM E 387-95 methods) and a total thickness not exceeding 70 μm

1.1.2006 to 31.12.2008

ex 3920 62 19

Non-metallised reflecting film, consisting of outside layers of poly(ethylene terephthalate) and multiple layers of poly(methyl methacrylate), of a total thickness of 51 μm (± 10 %), for use in the manufacture of laminated solar-reflecting automotive glass (1)

1.1.2006 to 31.12.2008

ex 3920 62 19

ex 3920 69 00

Iridescent film of polyester and poly(methyl methacrylate)

1.1.2006 to 31.12.2008

ex 3920 62 19

Multilayer film of a thickness not exceeding 150 μm, consisting of a polyester film coated on one side with polycarbonate resin, metallised on the other side with titanium coated with polycarbonate resin and other layers containing N, N'-diphenyl-N, N'-di-m-tolylbiphenyl-4,4'-ylenediamine

1.1.2006 to 31.12.2008

ex 3920 62 19

Laminated sheet, consisting of a biaxially oriented film of poly(ethylene terephthalate), covered on one side or on both sides with a layer of poly(ethylene terephthalate), for use in the manufacture of identity cards, credit cards and similar products (including “smart” cards) (1)

1.1.2006 to 31.12.2008

ex 3920 62 90

Film of poly(ethylene terephthalate), of a thickness of 500 μm (± 25 μm)

1.1.2006 to 31.12.2008

ex 3920 62 90

Strips of poly(ethylene terephthalate), covered on both sides with a layer of chemically modified polyester, of a width not exceeding 16 mm and a thickness of 0,5 mm or more but not exceeding 2 mm, having a tensile strength at break of 0,7 GPa or more (as determined by the ASTM D 638 method)

1.1.2006 to 31.12.2008

ex 3920 69 00

Film of poly(ethylene naphthalene-2,6-dicarboxylate)

1.1.2006 to 31.12.2008

ex 3920 69 00

Polycondensation product of terephthalic acid with a mixture of cyclohex-1,4-ylenedimethanol and ethane-1,2-diol, in the form of a film

1.1.2006 to 31.12.2008

ex 3920 69 00

Film of a copolymer of ethylene terephthalate and ethylene isophthalate, of a thickness not exceeding 2 μm

1.1.2006 to 31.12.2008

ex 3920 91 00

Poly(vinyl butyral) film having a graduated coloured band

1.1.2006 to 31.12.2008

ex 3920 91 00

Plasticised film of polyvinyl butyral, containing by weight:

—	either 14,5 % or more but not more than 17,5 % of dihexyl adipate,

—	or 14,5 % or more but not more than 28,5 % of dibutyl sebacate

1.1.2006 to 31.12.2008

ex 3920 91 00

Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:

—	a visible light transmission of 50 % or more,

—	coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),

—	a total thickness not exceeding 0,2 mm without taking the presence of poly(vinyl butyral) into account,

for use in the manufacture of heat-reflecting or decorative laminated glass (1)

1.1.2006 to 31.12.2008

ex 3920 99 28

Reflecting sheet of metallised polyurethane, containing glass beads, coated with a hot-melt adhesive layer, covered on one or both sides with a release sheet, in rolls of a width of 1 020 mm (± 20 mm), for slitting into safety clothing reflecting strip (1)

1.1.2006 to 31.12.2008

ex 3920 99 28

ex 3921 90 55

ex 7410 21 00

Film of polyimide, not containing epoxyde resin and/or glass fibres,:

—	metallised by sputtering with copper on one side or on both sides,

—	metallised by sputtering with copper and plated on one side or on both sides with refined copper or

—	covered on one side or on both sides with a copper foil

1.1.2006 to 31.12.2008

ex 3920 99 28

Mono-axially oriented polymer film containing the following monomers:

—	Poly (tetramethylene ether glycol),

—	Bis (4-isocyanotocyclohexyl) methane,

—	1,4-Butanediol or 1,3-Butanediol,

—	with a thickness of 0,25 mm or more but not more than 5,0 mm,

—	embossed with a regular pattern on one surface,

—	and covered with a release sheet

1.1.2006 to 31.12.2008

3920 99 53

ex 3920 99 59

Ion-exchange membranes of fluorinated plastic material

1.1.2006 to 31.12.2008

ex 3920 99 59

Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1 mm and containing by weight:

—	2 % or less of unhydrolysed acetate groups evaluated as vinyl acetate and

—	5 % or more but not more than 25 % of glycerol as plasticiser,

for the manufacture of roof windows (1)

1.1.2006 to 31.12.2008

ex 3920 99 59

Poly(1-chlorotrifluoroethylene) film

1.1.2006 to 31.12.2008

ex 3920 99 59

Film and sheet of a copolymer of ethylene with chlorotrifluoroethylene, of a thickness of 12 μm or more but not exceeding 400 μm

1.1.2006 to 31.12.2008

ex 3920 99 59

Film entirely of poly(vinyl alcohol), of a thickness not exceeding 1 mm and of a width of 2,20 m or more, with an extension at break, in the transverse direction, of 350 % or more

1.1.2006 to 31.12.2008

ex 3920 99 59

Biaxially-oriented film of poly(vinyl alcohol), coated on both sides, of a total thickness of less than 1 mm

1.1.2006 to 31.12.2008

ex 3920 99 59

Iridescent film of polyester, polyethylene and an ethylene-vinyl acetate copolymer

1.1.2006 to 31.12.2008

ex 3920 99 59

Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019 mm or more but not exceeding 0,14 mm, impermeable to water vapour

1.1.2006 to 31.12.2008

ex 3920 99 59

Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not exceeding 90 μm, a tensile strength at break of 20 MPa or more but not exceeding 45 MPa and an elongation at break of 250 % or more but not exceeding 900 %

1.1.2006 to 31.12.2008

ex 3921 13 10

Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not exceeding 0,10092

1.1.2006 to 31.12.2008

ex 3921 14 00

Cellular film of regenerated cellulose, of a thickness not exceeding 350 μm

1.1.2006 to 31.12.2008

ex 3921 19 00

Microporous polypropylene film of a thickness not exceeding 100 μm

1.1.2006 to 31.12.2008

ex 3921 19 00

Microporous film consisting of mixtures of cellulose acetate and cellulose nitrate, of a thickness not exceeding 200 μm

1.1.2006 to 31.12.2008

ex 3921 19 00

Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment (1)

1.1.2006 to 31.12.2008

ex 3921 19 00

Polyethylene film, of a thickness of 16 μm or more but not exceeding 24 μm, having:

—	a weight of 19 g/m2 (± 2 g/m2),

—	a water vapour transmission rate of 5 000 g/m2 or more but not exceeding 30 000 g/m2 per day (as determined by the ASTM D 6701-01 method),

—	an elongation in the transverse direction of 25 % or more at a load of 500 g or less,

—	an elongation in the machine direction of 50 % or more but not exceeding 100 % (as determined by the ASTM D 882-91 method),

for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles (1)

1.1.2006 to 31.12.2008

ex 3921 19 00

Film of polyethersulfone, of a thickness not exceeding 200 μm

1.1.2006 to 31.12.2008

ex 3921 19 00

Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not exceeding 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not exceeding 40 μm

1.1.2006 to 31.12.2008

ex 3921 90 19

Composite plate of polycarbonate and poly(butylene terephthalate), reinforced with glass fibres

1.1.2006 to 31.12.2008

ex 3921 90 19

Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres

1.1.2006 to 31.12.2008

ex 3921 90 60

ex 5407 71 00

ex 5903 90 99

Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulfonic acid groups, whether or not in the potassium or sodium salt form

1.1.2006 to 31.12.2008

ex 3921 90 60

Reinforced polypropylene sheet, of a thickness of 0,91 mm or more but not exceeding 1,12 mm, having a breaking strength of 890 N or more but not exceeding 1 500 N (as determined by the ASTM D 751 method), in rolls of a width of 3,81 m

1.1.2006 to 31.12.2008

ex 3921 90 60

Film, of a specular gloss of 30 or more but not exceeding 60 measured at an angle of 60 o using a glossmeter (as determined by the ISO 2813: 2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of colored poly(vinyl chloride), joined by a metalised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances (1)

1.1.2006 to 31.12.2008

ex 3921 90 60

Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not exceeding 1,2 mm

1.1.2006 to 31.12.2008

ex 3926 90 91

Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material

1.1.2006 to 31.12.2008

ex 3926 90 98

Microspheres of polymer of divinylbenzene, of a diameter of 4,5 μm or more but not exceeding 80 μm

1.1.2006 to 31.12.2008

ex 3926 90 98

Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems (1)

1.1.2006 to 31.12.2008

ex 3926 90 98

Tape pad, for use in the manufacture of goods of heading 8523 (1)

1.1.2006 to 31.12.2008

ex 3926 90 98

Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not exceeding 4,6 μm

1.1.2006 to 31.12.2008

ex 3926 90 98

Guide pin and pole, for use in the manufacture of goods of subheadings 8523 11 00 , 8523 12 00 and 8523 13 00 (1)

1.1.2006 to 31.12.2008

ex 3926 90 98

Microspheres of polyalkylsiloxane, on which are covalently bonded organic compounds, of a diameter of 1 μm or more but not exceeding 30 μm

1.1.2006 to 31.12.2008

ex 3926 90 98

Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not exceeding 1 200 μm and of a weight of 21 g/m2 or more but not exceeding 42 g/m2

1.1.2006 to 31.12.2008

ex 4007 00 00

Siliconated vulcanised rubber thread and cord

1.1.2006 to 31.12.2008

ex 4008 11 00

Blocks or sheets of cellular vulcanised rubber of modified ethylene-propylene-diene (EPDM) blended with chloroprene, which satisfy the Underwriters Laboratories Flammability Standard UL94HF-1

1.1.2006 to 31.12.2008

ex 4016 99 99

Soft rubber sealing stoppers for the manufacture of electrolytic capacitors (1)

1.1.2006 to 31.12.2008

4105 10 10

4105 10 90

4105 30 91

4105 30 99

Sheep or lambskin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114

1.1.2006 to 31.12.2008

4106 21 10

4106 21 90

4106 22 90

Goat or kidskin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114

1.1.2006 to 31.12.2008

4106 31 10

4106 31 90

4106 32 10

4106 32 90

4106 40 90

4106 91 00

4106 92 00

Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 4114

1.1.2006 to 31.12.2008

ex 5004 00 10

ex 5004 00 90

Yarn spun entirely from silk, not put up for retail sale

2.5

1.1.2006 to 31.12.2008

ex 5005 00 10

ex 5005 00 90

Yarn spun entirely from silk waste (noil), not put up for retail sale

1.1.2006 to 31.12.2008

5208 11 10

Fabrics for the manufacture of bandages, dressings and medical gauzes

5.2

1.1.2006 to 31.12.2008

ex 5402 41 00

Polyamide yarn, not textured, untwisted or with a twist not exceeding 22 turns per metre, of crimpable bicomponent filaments consisting of poly(hexamethylene adipamide) with a copolyamide, for the manufacture of:

—	knee-length stockings of subheadings 6115 20 11 and 6115 93 30 ,

—	women's stockings of subheadings 6115 20 19 and 6115 93 91 or

—	panty hose (tights) of subheading 6115 11 00 (1)

1.1.2006 to 31.12.2008

ex 5402 41 00

Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid

1.1.2006 to 31.12.2008

ex 5402 43 00

Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1 650 decitex, consisting of 110 filaments each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75 % or more but not exceeding 77 % of poly(ethylene terephthalate), for use in the manufacture of roofings (1)

1.1.2006 to 31.12.2008

ex 5402 49 99

ex 5402 69 90

Multifilaments yarn of polytetrafluoroethylene

1.1.2006 to 31.12.2008

ex 5402 49 99

Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures (1)

1.1.2006 to 31.12.2008

ex 5402 49 99

ex 5402 59 90

ex 5402 69 90

Non-textured filament yarn of poly(vinyl alcohol)

1.1.2006 to 31.12.2008

ex 5402 49 99

ex 5402 69 90

Yarn wholly of poly(glycollic acid)

1.1.2006 to 31.12.2008

ex 5402 49 99

Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1 000 continuous filaments or more but not more than 25 000 continuous filaments, of a weight per metre of 0,12 g or more but not exceeding 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn (1)

1.1.2006 to 31.12.2008

ex 5402 49 99

Polyethylene filament yarn, untwisted, of either 55, 110, 165 or 1 760 decitex, for the manufacture of goods of heading 5607 (1)

1.1.2006 to 31.12.2008

ex 5402 49 99

Synthetic filament yarn, single, untwisted, wholly of poly(thio-1,4-phenylene)

1.1.2006 to 31.12.2008

ex 5404 10 90

Monofilament of polytetrafluoroethylene

1.1.2006 to 31.12.2008

ex 5404 10 90

Monofilament of poly(1,4-dioxanone)

1.1.2006 to 31.12.2008

ex 5404 10 90

Monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5-dione, for the manufacture of surgical sutures (1)

1.1.2006 to 31.12.2008

ex 5404 10 90

Monofilaments of a stabilised blend of polyester with polyurethane, of 67 decitex or more and of which no cross-sectional dimension exceeds 1 mm

1.1.2006 to 31.12.2008

ex 5404 10 90

Monofilaments of polyester or poly(butylene terephthalate), with crosssectional dimension of 0,5mm or more but not exceeding 1mm, for use in the manufacture of zippers (1)

1.1.2006 to 31.12.2008

ex 5404 90 90

Strip of polyimide

1.1.2006 to 31.12.2008

ex 5407 71 00

Woven fabrics of poly(vinyl alcohol) fibres, for machine embroidery

1.1.2006 to 31.12.2008

ex 5501 90 90

Poly(vinyl alcohol) tow

1.1.2006 to 31.12.2008

ex 5503 10 10

ex 5601 30 00

Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine), of a length not exceeding 7 mm

1.1.2006 to 31.12.2008

ex 5503 90 10

ex 5503 90 90

Acetalised, multicomponent spun fibres with a matrix fibril structure, consisting of emulsion-polymerised poly(vinyl alcohol) and poly(vinyl chloride)

1.1.2006 to 31.12.2008

ex 5503 90 90

ex 5506 90 90

ex 5601 30 00

Poly(vinyl alcohol) fibres, whether or not acetalised

1.1.2006 to 31.12.2008

ex 5503 90 90

Fibres wholly of poly(thio-1,4-phenylene)

1.1.2006 to 31.12.2008

ex 5601 30 00

Polyester fibres, measuring 0,56 decitex, of a length of 3 mm or more but not exceeding 5 mm

1.1.2006 to 31.12.2008

ex 5601 30 00

Acrylic fibres, measuring 0,11 and 0,56 decitex, of a length of 3 mm or more but not exceeding 5 mm

1.1.2006 to 31.12.2008

ex 5603 11 10

ex 5603 11 90

ex 5603 12 10

ex 5603 12 90

ex 5603 91 10

ex 5603 91 90

ex 5603 92 10

ex 5603 92 90

Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:

—	of a thickness of 200 μm or more but not exceeding 280 μm and

—	of a weight of 20 g/m2 or more but not exceeding 50 g/m2

1.1.2006 to 31.12.2008

ex 5603 11 10

ex 5603 11 90

ex 5603 12 10

ex 5603 12 90

Non-wovens, containing spunbonded fibres of polypropylene or of polypropylene and polyethylene, for the manufacture of napkins and napkin liners for babies and similar sanitary articles (1)

1.1.2006 to 31.12.2008

ex 5603 12 90

ex 5603 13 90

ex 5603 14 90

ex 5603 92 90

ex 5603 93 90

ex 5603 94 90

Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles

1.1.2006 to 31.12.2008

ex 5603 12 90

ex 5603 13 90

Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not exceeding 80 g/m2 and an air resistance (Gurley) of 8 s or more but not exceeding 36 s (as determined by the ISO 5636/5 method)

1.1.2006 to 31.12.2008

ex 5603 12 90

ex 5603 13 90

ex 5603 92 90

ex 5603 93 90

Non-wovens of polypropylene, consisting of a meltblown layer, laminated on each side with spunbonded filaments of polypropylene, of a thickness not exceeding 550 μm and of a weight not exceeding 80 g/m2, in the piece or simply cut into squares or rectangles, not impregnated

1.1.2006 to 31.12.2008

ex 5603 13 90

ex 5603 14 90

Non-wovens consisting of a central layer of polycarbonate fibres, laminated on each side with spunbonded filaments of polyester, of a weight of more than 130 g/m2 but not exceeding 200 g/m2

1.1.2006 to 31.12.2008

ex 5603 13 90

ex 5603 93 90

Polyethylene non-woven, covered on both sides with a non-woven of polypropylene and wood pulp, of a weight of 70 g/m2 or more but not exceeding 90 g/m2, in rolls, for use in the manufacture of wet wipes (1)

1.1.2006 to 31.12.2008

ex 5603 14 90

Non-wovens, consisting of a central elastomeric film laminated on each side with spunbonded filaments of polypropylene, of a weight of 200 g/m2 or more but not exceeding 300 g/m2

1.1.2006 to 31.12.2008

ex 5603 91 90

Non-woven viscose rayon, with a water-soluble starch based binder and having a weight of 12 or more but not more than 18 g/m2

1.1.2006 to 31.12.2008

ex 5603 92 90

ex 5603 93 90

Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene

1.1.2006 to 31.12.2008

ex 5603 92 90

Non-wovens of staple fibres, in rolls, of a width of 78 mm or more but not exceeding 252 mm, for the manufacture of floppy discs (1)

1.1.2006 to 31.12.2008

ex 5603 92 90

ex 5603 93 90

ex 5603 94 90

Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene, of a total thickness not exceeding 50 mm

1.1.2006 to 31.12.2008

ex 5603 94 90

Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips (1)

1.1.2006 to 31.12.2008

ex 5604 90 00

Strip, of:

—	a polyester layer, laminated on one or both sides to a polymer layer containing glass beads,

—	a maximum width of 1,2 mm,

—	a maximum thickness of 0,05 mm

1.1.2006 to 31.12.2008

ex 5607 50 90

Twine, unsterilised, wholly of poly(glycollic acid), plaited or braided, with an inner core, for the manufacture of surgical sutures (1)

1.1.2006 to 31.12.2008

ex 5803 10 00

Gauze of cotton, of a width of less than 1 500 mm

1.1.2006 to 31.12.2008

ex 5903 10 90

ex 5903 20 90

ex 5903 90 99

Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres

1.1.2006 to 31.12.2008

ex 5903 20 90

Tape of polyester fabric laminated with a metallised polyurethane film containing glass beads, for use in the manufacture of marine life-saving equipment (1)

1.1.2006 to 31.12.2008

ex 5906 99 90

Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine)

1.1.2006 to 31.12.2008

ex 5907 00 90

Textile fabrics, coated with adhesive in which are embedded spheres of a diameter not exceeding 75 μm

1.1.2006 to 31.12.2008

ex 5911 10 00

Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products (1)

1.1.2006 to 31.12.2008

ex 5911 90 90

Yarn and strip of impregnated polytetrafluoroethylene, whether or not oiled or graphited

1.1.2006 to 31.12.2008

ex 5911 90 90

ex 8421 99 00

Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness not exceeding 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more

1.1.2006 to 31.12.2008

6305 10 10

Sacks and bags, of a kind used for the packing of goods, used, of jute or of other textile bast fibres of heading 5303

1.1.2006 to 31.12.2008

ex 6305 90 00

Sacks and bags, of a kind used for the packing of goods, used, of flax or of sisal

1.1.2006 to 31.12.2008

ex 6307 90 10

Sterile mesh-implant, consisting of a knitted fabric of polypropylene monofilaments, with rounded edges, in forms covered by a square of dimensions not exceeding 31 × 31 cm

1.1.2006 to 31.12.2008

ex 6813 90 00

Friction material, of a thickness of less than 20 mm, not mounted, for the manufacture of friction components of a kind used in automatic transmissions and clutches (1)

1.1.2006 to 31.12.2008

ex 6903 20 90

ex 6914 90 90

Yarn of continuous ceramic filaments, each filament containing by weight:

—	12 % or more of diboron trioxide,

—	26 % or less of silicon dioxide and

—	60 % or more of dialuminium trioxide

1.1.2006 to 31.12.2008

ex 6903 90 90

ex 6909 19 00

Beryllium oxide, of a purity by weight of more than 99 %, in the form of blanks, bars, blocks or plates

1.1.2006 to 31.12.2008

ex 6903 90 90

Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials

1.1.2006 to 31.12.2008

ex 6909 12 00

Plate, of dialuminium trioxide and titanium carbide, of dimensions not exceeding 48 × 48 mm, or of a diameter not exceeding 125 mm, for the manufacture of magnetic heads (1)

1.1.2006 to 31.12.2008

ex 6909 19 00

Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume not exceeding 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end

1.1.2006 to 31.12.2008

ex 6909 19 00

ex 6914 90 90

Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:

—	2 % or more of diboron trioxide,

—	28 % or less of silicon dioxide and

—	60 % or more of dialuminium trioxide

1.1.2006 to 31.12.2008

ex 6909 19 00

Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume not exceeding 65 litres, having per cm2 of the surface of the cross section one or more closed channels at the tail end

1.1.2006 to 31.12.2008

ex 6914 90 90

Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm

1.1.2006 to 31.12.2008

ex 7002 10 00

Balls of E-glass, of a diameter of 20,3 mm or more but not exceeding 26 mm

1.1.2006 to 31.12.2008

ex 7006 00 90

Glass plate, coated on one side with chromium and/or with a mixture of diindium trioxide and tin dioxide, of dimensions of 260 × 320 mm or more but not exceeding 400 × 400 mm, of a thickness not exceeding 1,2 mm, for the manufacture of liquid crystal displays (1)

1.1.2006 to 31.12.2008

ex 7006 00 90

Colour filter, consisting of a glass plate with red, blue and green pixels, having a total thickness of 1,1 mm (± 0,1 mm) and exterior dimensions of 320 × 352 mm or more but not exceeding 320 × 400 mm, for the manufacture of liquid crystal displays (1)

1.1.2006 to 31.12.2008

ex 7006 00 90

Glass plate, uncoated, of dimensions of 320 × 352 mm or more but not exceeding 320 × 400 mm, of a thickness of 0,6 mm or more but not exceeding 1,2 mm, for the manufacture of liquid crystal displays (1)

1.1.2006 to 31.12.2008

ex 7007 19 20

Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not exceeding 185,42 cm (± 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP videomonitors or television sets (1)

1.1.2006 to 31.12.2008

ex 7007 29 00

Glass plate of a diagonal size of 81,28 cm (+/- 1,5 cm) or more, but not exceeding 185,42 cm (+/- 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or two sides, for use in the manufacture of PDP videomonitors or television sets (1)

1.1.2006 to 31.12.2008

ex 7011 10 00

Glass lenses with a stippled front refractor or with a front refractor composed of prismatic elements, with an external diameter of more than 121 mm but not exceeding 125 mm

1.1.2006 to 31.12.2008

ex 7011 10 00

ex 7011 90 00

Parabolic glass cup, with an external diameter of more than 121 mm but not exceeding 125 mm

1.1.2006 to 31.12.2008

ex 7011 20 00

Glass cone for cathode-ray tube, of a diagonal measurement of 912 mm (± 5 mm) and a distance from seal edge to the end of the neck of 454,3 mm (± 5 mm)

1.1.2006 to 31.12.2008

ex 7011 20 00

Glass face-plate:

—	with a diagonal measurement of 366,4 mm (± 1,5 mm) and of dimensions of 246,4 × 315,4 mm (± 1,5 mm),

—	with a diagonal measurement of 391 mm (± 1,5 mm) and of dimensions of 261,4 × 326,8 mm (± 1,5 mm),

—	with a diagonal measurement of 442 mm (± 1,5 mm) and of dimensions of 293,4 × 369,2 mm (± 1,5 mm),

—	with a diagonal measurement of 544,5 mm (± 1,6 mm) and of dimensions of 358 × 454 mm (± 1,6 mm), having a cylindrical curvature,

—	with a diagonal measurement of 570,5 mm (± 1,6 mm) and of dimensions of 360 × 486 mm (± 1,6 mm),

—	with a diagonal measurement of 629,8 mm (± 3 mm) and of dimensions of 406,5 × 519 mm (± 2 mm), having a cylindrical curvature, or

—	with a diagonal measurement of 753 mm (± 1,6 mm) and of dimensions of 471 × 640 mm (± 1,6 mm),

and with a raised edge, for the manufacture of colour cathode-ray tubes (1)

1.1.2006 to 31.12.2008

ex 7011 20 00

Glass face-plate:

—	with a diagonal measurement of 604,5 mm (± 3 mm) and of dimensions of 340 × 541 mm (± 2 mm),

—	with a diagonal measurement of 639,3 mm (± 3 mm) and of dimensions of 413,6 × 527 mm (± 2 mm),

—	with a diagonal measurement of 708 mm (± 3 mm) and of dimensions of 404 × 633 mm (± 2 mm),

—	with a diagonal measurement of 723 mm (± 3 mm) and of dimensions of 477 × 602 mm (± 2 mm), or

—	with a diagonal measurement of 812,8 mm (± 3 mm) and of dimensions of 463,8 × 725,5 mm (± 2 mm),

having a cylindrical curvature, for the manufacture of colour cathode-ray tubes (1)

1.1.2006 to 31.12.2008

ex 7011 20 00

Glass bulb for monochrome cathode-ray tube, of a diagonal measurement of 3,8 cm or more but not exceeding 51 cm and a nominal neck diameter of 13 mm, 20 mm, 29 mm or 37 mm

1.1.2006 to 31.12.2008

ex 7014 00 00

Optical elements of glass (other than those of heading 7015 ), not optically worked, other than signalling glassware

1.1.2006 to 31.12.2008

ex 7019 12 00

Rovings, measuring 2 600 tex or more but not more than 3 300 tex and of a loss on ignition of 4 % or more but not exceeding 8 % by weight (as determined by the ASTM D 2584-94 method)

1.1.2006 to 31.12.2008

ex 7019 12 00

Rovings, measuring 650 tex or more but not more than 2 500 tex, coated with a layer of polyurethane whether or not mixed with other materials

1.1.2006 to 31.12.2008

ex 7019 12 00

Rovings, measuring 1 693 tex (± 10 %), coated with a layer of styrene-butadiene rubber (SBR)

1.1.2006 to 31.12.2008

ex 7019 12 00

Rovings, measuring 2 040 tex (± 10 %), coated with carbon

1.1.2006 to 31.12.2008

ex 7019 12 00

Rovings, measuring 392 tex or more but not more than 2 884 tex, coated with a layer of an acrylic copolymer

1.1.2006 to 31.12.2008

ex 7019 12 00

Rovings, measuring 517 tex or more but not more than 3 569 tex, coated with a layer of paraffin

1.1.2006 to 31.12.2008

ex 7019 12 00

Rovings, measuring 417 tex or more but not more than 3 180 tex, coated with a layer of poly(sodium acrylate) and poly(acrylic acid)

1.1.2006 to 31.12.2008

ex 7019 19 10

Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not exceeding 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers

1.1.2006 to 31.12.2008

ex 7019 19 10

Yarn of 22 tex (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 5 μm, in which filaments of a diameter of 4,2 μm or more but not exceeding 5,8 μm predominate

1.1.2006 to 31.12.2008

ex 7019 19 10

Yarn of 33, 34 or 51 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 6 μm, in which filaments of a diameter of 5,1 μm or more but not exceeding 6,9 μm predominate

1.1.2006 to 31.12.2008

ex 7019 19 10

Yarn of E-glass of 68 or 74 tex (± 7 %), obtained from continuous spun-glass filaments of a nominal diameter of 9 μm, in which filaments of a diameter of 8,1 μm or more but not exceeding 9,9 μm predominate, for the manufacture of woven fabrics for electrical laminates (prepregs) (1)

1.1.2006 to 31.12.2008

ex 7019 39 00

Sheet, consisting of a layer of glass fibres and polypropylene, containing by weight 40 % or more but not more than 60 % of glass fibres of a length of 12,7 mm (± 0,2 mm) and a diameter of 16 μm (± 1 μm), covered on one side with a plastic film and on the other side with a plastic layer, of a total thickness not exceeding 1 mm

1.1.2006 to 31.12.2008

ex 7019 39 00

Sheet, consisting of chopped glass fibres and thermoplastic polymer, containing by weight 30 % or more but not more than 70 % of glass fibres of a diameter of 16 μm (+/- 1 μm), whether or not covered on one or both sides with a protective plastic layer

1.1.2006 to 31.12.2008

ex 7019 90 10

Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate

1.1.2006 to 31.12.2008

ex 7019 90 10

Non-textile E-glass fibres, of a length not exceeding 3 mm and a diameter of 5 μm, for the manufacture of catalysts for the purification of smokes (1)

1.1.2006 to 31.12.2008

ex 7019 90 99

Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulfonated polyethylene

1.1.2006 to 31.12.2008

ex 7019 90 99

Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)

1.1.2006 to 31.12.2008

ex 7116 20 90

Disc of silicon on sapphire

1.1.2006 to 31.12.2008

7202 50 00

Ferro-silico-chromium

1.1.2006 to 31.12.2008

ex 7202 99 80

Ferro-silicon, nitrided, containing by weight 55 % or more of silicon and 25 % or more of nitrogen

1.1.2006 to 31.12.2008

ex 7409 19 00

Sheet or plate of polytetrafluoroethylene, with aluminium oxide or titanium dioxide as a filler or reinforced with glass-fibre fabric, laminated on both sides with copper foil

1.1.2006 to 31.12.2008

ex 7410 21 00

Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil

1.1.2006 to 31.12.2008

ex 7410 21 00

Sheet or plates

—	consisting of a central layer of paper, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or

—	consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0,15 mm

1.1.2006 to 31.12.2008

ex 7419 99 00

ex 7616 99 90

Disc (target) with deposition material, consisting of molybdenum silicide:

—	containing 1 mg/kg or less of sodium and

—	mounted on a copper or aluminium support

1.1.2006 to 31.12.2008

ex 7419 99 00

ex 7616 99 90

Disc (target) with deposition material, of tungsten or an alloy containing by weight 90 % of tungsten and 10 % of titanium:

—	containing 100 μg/kg or less of sodium and

—	mounted on a copper or aluminium support

1.1.2006 to 31.12.2008

ex 7419 99 00

ex 7616 99 90

Disc (target) with deposition material, of titanium:

—	containing 50 μg/kg or less of sodium and

—	mounted on a copper or aluminium support

1.1.2006 to 31.12.2008

ex 7605 19 00

Not alloyed aluminium wire, of a diameter of 2 mm or more but not exceeding 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not exceeding 0,117 mm

1.1.2006 to 31.12.2008

ex 7606 11 10

Tape of not alloyed aluminium, with a reflecting film, a transparent polyurethane topcoat, a netting and ceramic anti-skid particles

1.1.2006 to 31.12.2008

ex 7606 11 91

ex 7606 11 93

Strip with depth-etching, of band-anodic oxidation treated aluminium of a purity by weight of 99,9 % and a thickness of less than 3 mm, for incorporation in bodies for motor vehicles (1)

1.1.2006 to 31.12.2008

ex 7613 00 00

ex 8708 99 98

Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a capacity of 172 l (± 10 %) and an unfilled weight not exceeding 64 kg

1.1.2006 to 31.12.2008

ex 7616 99 90

Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts

1.1.2006 to 31.12.2008

ex 7616 99 90

Discs of aluminium alloy, of a thickness not exceeding 0,84 mm, for the manufacture of goods of subheading 8523 20 10 (1)

1.1.2006 to 31.12.2008

ex 7905 00 00

Plate of an alloy of zinc, ground and polished on one surface and coated with an epoxide resin on the other surface, of rectangular or square shape, of a length of 300 mm or more but not exceeding 2 000 mm and of a width of 300 mm or more but not exceeding 1 000 mm, and containing:

—	10 mg/kg or less of iron,

—	10 mg/kg or less of lead,

—	700 mg/kg or more but not more than 900 mg/kg of aluminium and

—	500 mg/kg or more but not more than 900 mg/kg of magnesium,

for the manufacture of sensitised printing plates (1)

1.1.2006 to 31.12.2008

ex 8103 90 90

Welded tube solely of tantalum, or solely of an alloy of tantalum with tungsten containing by weight 3,5 % or less of tungsten

1.1.2006 to 31.12.2008

8104 11 00

Unwrought magnesium, containing at least 99,8 % by weight of magnesium

1.1.2006 to 31.12.2008

ex 8104 90 00

Ground and polished magnesium sheets, of dimensions not exceeding 1 500 × 2 000 mm, coated on one side with an epoxy resin insensitive to light

1.1.2006 to 31.12.2008

ex 8104 90 00

Sections, of extruded magnesium, of a length of 800 mm or more but not exceeding 2 900 mm and a width of 15 mm or more but not exceeding 70 mm

1.1.2006 to 31.12.2008

ex 8108 20 00

Titanium sponge

1.1.2006 to 31.12.2008

ex 8108 30 00

Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium

1.1.2006 to 31.12.2008

ex 8108 90 50

Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not exceeding 3,1 mm, of a width of 1 000 mm or more but not exceeding 1 254 mm, for the manufacture of goods of subheading 8714 19 00 (1)

1.1.2006 to 31.12.2008

ex 8108 90 50

Alloy of titanium, aluminium and vanadium, containing by weight 2,5 % or more but not more than 3,5 % of aluminium and 2,0 % or more but not more than 3,0 % of vanadium, in sheets or rolls, of a thickness of 0,6 mm or more but not exceeding 0,9 mm, of a width not exceeding 1 000 mm, for the manufacture of goods of subheading 8714 19 00 (1)

1.1.2006 to 31.12.2008

ex 8109 20 00

Non-alloy zirconium, in the form of ingots, containing by weight more than 0,01 % of hafnium, for use in the manufacture of tubes for the chemical industry (1)

1.1.2006 to 31.12.2008

ex 8110 10 00

Antimony in the form of ingots

1.1.2006 to 31.12.2008

ex 8112 19 00

Beryllium, of a purity by weight of 94 % or more, in the form of bars, plates and sheets

1.1.2006 to 31.12.2008

ex 8112 99 30

Alloy of niobium (columbium) and titanium, in the form of bars and rods

1.1.2006 to 31.12.2008

ex 8309 90 90

Aluminium can ends with so-called “ring pull” full aperture with a diameter of 136,5 mm (± 1 mm)

1.1.2006 to 31.12.2008

ex 8401 30 00

Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors (1)

1.1.2006 to 31.12.2008

ex 8407 31 00

Two stroke internal combustion engine, of a cylinder capacity not exceeding 30 cm3 for use in the manufacture of portable motorised scooters falling within subheading 8711 10 00 (1)

1.1.2006 to 31.12.2008

ex 8407 90 10

Two-stroke internal combustion engines, having a cylinder capacity not exceeding 125 cm3, for the manufacture of lawnmowers of subheading 8433 11 (1)

1.1.2006 to 31.12.2008

ex 8408 90 41

Diesel engines of a power not exceeding 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)

1.1.2006 to 31.12.2008

ex 8408 90 43

Diesel engines of a power not exceeding 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)

1.1.2006 to 31.12.2008

ex 8414 30 89

Open shaft reciprocating compressor, for use in the manufacture of vehicle mounted temperature control systems (1)

1.1.2006 to 31.12.2008

ex 8414 59 20

Axial fan of 170 mm (± 10 mm) diameter and 50 mm (± 0,10 mm) height, for use in the manufacture of products of CN 8525 (1)

1.1.2006 to 31.12.2008

ex 8414 90 00

Aluminium pistons, partially covered with polytetrafluoroethylene, for incorporation into compressors of air conditioning machines of motor vehicles (1)

1.1.2006 to 31.12.2008

ex 8414 90 00

Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles (1)

1.1.2006 to 31.12.2008

ex 8418 99 90

Welded cooling micro-elements, of an alloy of aluminium, for the manufacture of condensers (1)

1.1.2006 to 31.12.2008

ex 8419 19 00

Heat accumulator for motor vehicles, of a coolant capacity of 4 l or more but not exceeding 10 l

1.1.2006 to 31.12.2008

ex 8419 89 98

Immersion-tube (coils) bundles, consisting of an assembly of plastic tubes terminating at each end in a honeycomb-structure (end-fitting) surrounded by a pipe-connector

1.1.2006 to 31.12.2008

ex 8421 99 00

Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder

1.1.2006 to 31.12.2008

ex 8421 99 00

Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not exceeding 3 700 mm and a diameter not exceeding 500 mm

1.1.2006 to 31.12.2008

ex 8421 99 00

Parts of equipment for the filtration of magnetic dispersions, consisting essentially of nylon-6 fibres, enclosed in a plastic casing of a diameter of 70 mm (± 2 mm) and a length of 520 mm (± 5 mm)

1.1.2006 to 31.12.2008

ex 8422 30 00

ex 8479 89 97

Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges (1)

1.1.2006 to 31.12.2008

ex 8439 99 10

ex 8439 99 90

Suction-roll shells, not drilled, in the form of alloy-steel tubes, of a length of 5 207 mm or more and an external diameter of 754 mm or more, for use in machinery for making paper or paperboard (1)

1.1.2006 to 31.12.2008

ex 8454 30 10

Casting machines for casting under pressure of metal alloys in thixotropic (semi-solid) form

1.1.2006 to 31.12.2008

ex 8455 90 00

Helical turn device for cold-rolling mill

1.1.2006 to 31.12.2008

ex 8456 10 90

Machine-tool operating by laser beam, for the cutting of slots on the surface of a cylindrical tube for use in the manufacture of endo-vascular prosthesis (so-called “stents”) (1)

1.1.2006 to 31.12.2008

ex 8473 40 19

Thermal printer head

1.1.2006 to 31.12.2008

ex 8477 80 99

Machines for casting or for surface modification of plastic membranes of heading 3921

1.1.2006 to 31.12.2008

ex 8479 89 97

ex 8501 10 99

Motor, whether or not mounted on a baseplate, for use in the manufacture of products falling within subheading 8525 20 20 or 8527 90 20 (1)

1.1.2006 to 31.12.2008

ex 8481 80 59

Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines

1.1.2006 to 31.12.2008

ex 8483 10 95

Integrally forged and roughly shaped generator and turbine shafts of a weight exceeding 215 tonnes

1.1.2006 to 31.12.2008

ex 8483 40 51

Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 (1)

1.1.2006 to 31.12.2008

ex 8483 40 59

ex 8483 40 90

Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 (1)

1.1.2006 to 31.12.2008

ex 8501 10 99

DC motor, brushless, with an external diameter not exceeding 25,4 mm, a rated speed of 2 260 (± 15 %) or 5 420 (± 15 %) rpm, a supply voltage of 1,5 or 3 V

1.1.2006 to 31.12.2008

ex 8501 10 99

DC stepping motor, with an angle of step of 1,8 o (± 0,09 o), a holding torque of 0,156 Nm or more, a coupling flange the exterior dimensions of which do not exceed 43 × 43 mm, a chuck of a diameter of 4 mm (± 0,1 mm), a two-phase winding and an output not exceeding 5 W

1.1.2006 to 31.12.2008

ex 8501 10 99

DC motor, whether or not mounted on a baseplate, for use in the manufacture of products falling within subheading 8471 70 50 (1)

1.1.2006 to 31.12.2008

ex 8501 10 99

DC motor, with brushes, with a typical running torque of 0,004 Nm (±0,001 Nm), with a coupling flange of a diameter of 32 mm (±0,5 mm) and a chuck of a diameter of 2 mm (±0,004 mm), with an internal rotor, a three-phase winding, a rated speed of 2 800 (±10 %) rpm and a supply voltage of 12 V (±15 %)

1.1.2006 to 31.12.2008

ex 8501 10 99

DC motor with brushes and an internal rotor with a three-phase winding, of a specified temperature range covering at least -20 oC to + 70 oC

1.1.2006 to 31.12.2008

ex 8501 10 99

DC stepping motor, with an angle of step of 18o or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 x 68 mm, a two phase winding and an output not exceeding 5 W

1.1.2006 to 31.12.2008

ex 8501 10 99

DC motor, brushless, with an external diameter not exceeding 29 mm, a rated speed of 1 500 (±15 %) or 6 800 (±15 %) rpm, a supply voltage of 2 or 8 V

1.1.2006 to 31.12.2008

ex 8501 10 99

Multiphase DC motor, blushless, of a continuous output of 31W (+/- 5 W) calculated with 600 rpm, equipped with electronic circuit with sensor using Hall effect (electric power steering motor)

1.1.2006 to 31.12.2008

ex 8502 40 00

Rotary converter, with a ferrite core, having coils with 2 or 6 windings and a diameter of 0,1 mm, connected to a flexible printed circuit

1.1.2006 to 31.12.2008

ex 8503 00 91

ex 8503 00 99

Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring

1.1.2006 to 31.12.2008

ex 8503 00 99

Stamped collector of an electric motor, having an external diameter not exceeding 16 mm

1.1.2006 to 31.12.2008

ex 8504 40 90

Direct current to direct current converter

1.1.2006 to 31.12.2008

ex 8504 40 90

Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 8516 50 00 (1)

1.1.2006 to 31.12.2008

ex 8504 50 95

Inductor with an inductance not exceeding 62 mH

1.1.2006 to 31.12.2008

ex 8504 50 95

Multilayer monolithic inductors, contained in a housing of the SMD (surface mounted device) type the exterior dimensions of which do not exceed 1,8 x 3,4 mm, for use in the manufacture of products falling within subheading 8517 11 00 , 8525 20 20 or 8527 90 20 (1)

1.1.2006 to 31.12.2008

ex 8504 90 11

Ferrite cores, other than for deflection yokes

1.1.2006 to 31.12.2008

ex 8504 90 18

Part of a rotary transformer, comprising a ferrite core provided with circular grooves with copper wire windings

1.1.2006 to 31.12.2008

ex 8505 11 00

Ferrite magnet having a remanence of 455 mT (±15 mT)

1.1.2006 to 31.12.2008

ex 8505 11 00

Neodymium-magnet discs with a diameter not exceeding 90 mm, whether or not containing a hole in the centre

1.1.2006 to 31.12.2008

ex 8505 19 90

Neodymium-ferro ring with an external diameter not exceeding 13 mm, an internal diameter not exceeding 9 mm

1.1.2006 to 31.12.2008

ex 8505 19 90

Magnet, for use in the manufacture of deflection yokes (1)

1.1.2006 to 31.12.2008

ex 8505 90 10

Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading 8517 (1)

1.1.2006 to 31.12.2008

ex 8505 90 10

Electro-mechanical throttle plate actuator for automotive engines

1.1.2006 to 31.12.2008

ex 8506 50 90

Lithium iodine single cell battery the dimensions of which do not exceed 9 × 23 × 45 mm and a voltage not exceeding 2,8 V

1.1.2006 to 31.12.2008

ex 8506 50 90

Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit

1.1.2006 to 31.12.2008

ex 8506 50 90

Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions not exceeding 28 x 45 x 15 mm and a capacity of not less than 1,05 Ah

1.1.2006 to 31.12.2008

ex 8507 30 20

ex 8507 80 20

ex 8507 80 30

ex 8507 80 80

Rectangular accumulator, with a length not exceeding 69 mm, a width not exceeding 36 mm and a thickness not exceeding 12 mm, for use in the manufacture of rechargeable batteries (1)

1.1.2006 to 31.12.2008

ex 8507 30 20

Cylindrical nickel-cadmium accumulator, with a length of 65,3 mm (±1,5 mm) and a diameter of 14,5 mm (±1 mm), having a nominal capacity of 1 000 mAh or more, for use in the manufacture of rechargeable batteries (1)

1.1.2006 to 31.12.2008

ex 8507 80 20

Cylindrical nickel-hydride accumulator, of a diameter not exceeding 14,5 mm, for the manufacture of rechargeable batteries (1)

1.1.2006 to 31.12.2008

ex 8507 80 30

Cylindrical lithium-ion accumulator, with a length of 64,6 mm or more and a diameter of 18,1 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries (1)

1.1.2006 to 31.12.2008

ex 8516 90 00

Dual diode, consisting of a power rectifying diode connected with a transformer protector diode through a wire, with a peak reverse power rate of 2 J or more, for use in the manufacture of products falling within subheading 8516 50 00 (1)

1.1.2006 to 31.12.2008

ex 8516 90 00

Stainless steel soleplate with heating wire, for use in the manufacture of electric irons (1)

1.1.2006 to 31.12.2008

ex 8518 29 95

Loudspeaker having a power of 5 W and an impedance of 4 ohms, with a diameter not exceeding 50 mm, for use in the manufacture of portable phones (1)

1.1.2006 to 31.12.2008

ex 8518 30 95

Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 × 6 × 8 mm

1.1.2006 to 31.12.2008

ex 8518 40 81

Audio-frequency amplifier unit, comprising at least an audio-frequency amplifier, a static converter and a sound generator, for the manufacture of active loudspeaker boxes (1)

1.1.2006 to 31.12.2008

ex 8518 90 00

Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers (1)

1.1.2006 to 31.12.2008

ex 8520 90 00

Drive-unit capable of magnetooptical signal recording and optical signal reproducing, comprising at least an optical unit, DC motors and a printed circuit on which are mounted integrated circuits providing drive and signal processing functions for reading optical discs having an external diameter not exceeding 70 mm, not comprising circuits with amplification functions or power supply drive functions

1.1.2006 to 31.12.2008

ex 8522 90 49

Optical unit consisting of a laser diode with one photodiode, emitting light of a nominal wavelength of 780 nm, contained in a housing with a diameter of not more than 10 mm and a height of not more than 9 mm, with not more than 10 connections

1.1.2006 to 31.12.2008

ex 8522 90 49

Electronic assembly for a laser read-head of a compact disc player, comprising:

—	a printed circuit,

—	a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,

—	not more than 3 connectors,

—	not more than 1 transistor,

—	not more than 3 variable and 4 fixed resistors,

—	not more than 5 capacitors,

the whole mounted on a support

1.1.2006 to 31.12.2008

ex 8522 90 49

Printed circuit board mounted with electronic circuits operating at a voltage of 12 V, for use in the manufacture of television sets combined with video units (1)

1.1.2006 to 31.12.2008

ex 8522 90 49

Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit

1.1.2006 to 31.12.2008

ex 8522 90 80

Thin-film recording and reproducing device, having at least 9 parallel channels for digital signals and at least 2 channels for analogue signals, to which a non-magnetic ceramic substrate is fixed, the whole rounded at one side, for use in the manufacture of magnetic heads for digital sound recording and digital/analogue sound reproducing apparatus of the cassette-type (1)

1.1.2006 to 31.12.2008

ex 8522 90 80

Cassette-deck sub-assembly for sound recording and reproducing apparatus, for use in the manufacture of telephone answering machines (1)

1.1.2006 to 31.12.2008

ex 8522 90 80

Sound reproducing assembly, comprising a tape deck mechanism of the cassette type, comprising a DC motor, for use in the manufacture of products falling within heading 8519 (1)

1.1.2006 to 31.12.2008

ex 8522 90 80

Roll for magnetic tape guiding and winding, for use in the manufacture of products falling within heading 8521 or 8522 (1)

1.1.2006 to 31.12.2008

ex 8522 90 80

Magnetic head for erasing video tapes, for use in the manufacture of products falling within heading 8521 or 8522 (1)

1.1.2006 to 31.12.2008

ex 8522 90 80

Assembly consisting of a driver circuit, a tacho-sensor and a brushless DC motor

1.1.2006 to 31.12.2008

ex 8522 90 80

Analogue sound recording and reproducing assembly, comprising a record/playback head and a twin tape deck mechanism of the cassette type, not comprising circuits with amplification functions or power supply drive functions, for use in the manufacture of products falling within subheadings 8527 <nbsp>31<nbsp>91 and 8527 <nbsp>31<nbsp>98 (1)

1.1.2006 to 31.12.2008

ex 8522 90 80

Assembly for optical discs, comprising at least an optical unit and DC motors, capable or not of double layer recording

1.1.2006 to 31.12.2008

ex 8522 90 80

Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading 8521 (1)

1.1.2006 to 31.12.2008

ex 8522 90 80

Optical reading head for CD player, consisting of one laser diode, one photodetector integrated circuit and one beam splitter

1.1.2006 to 31.12.2008

ex 8522 90 80

ex 8548 90 90

Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings 8519 , 8520 , 8521, 8526 , 8527 , 8528 or 8543 (1)

1.1.2006 to 31.12.2008

ex 8522 90 80

Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading 8521 (1)

1.1.2006 to 31.12.2008

ex 8522 90 80

Magnetic head for playback of audio tapes, for use in the manufacture of products falling within heading 8519 (1)

1.1.2006 to 31.12.2008

ex 8525 30 90

Assembly for television cameras of dimensions not exceeding 10 × 15 × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution not exceeding 1 024 × 1 280 pixel, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 8525 20 20 (1)

1.1.2006 to 31.12.2008

ex 8525 30 90

Compact chassis-type closed circuit television (CCTV) cameras, of a weight of not more than 250 g, contained in a housing of dimensions not exceeding 50 × 60 × 89,5 mm, with a single sensor charge-couple device (CCD), with effective pixels not exceeding 440 000 , for use in CCTV surveillance systems (1)

1.1.2006 to 31.12.2008

ex 8528 21 90

Liquid crystal display colour video monitor having a DC input voltage of 10 V or more but not exceeding 30 V or a fix DC input voltage of 12 V, with a diagonal measurement of the screen of 33,2 cm or less, suitable for the incorporation into goods of Chapters 84 to 90 and 94

1.1.2006 to 31.12.2008

ex 8528 22 00

Video monitor comprising:

—	a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen not exceeding 110 mm and equipped with a deflector yoke, and

—	a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,

the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus (1)

1.1.2006 to 31.12.2008

ex 8529 10 85

Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (± 30 kHz), contained in a housing

1.1.2006 to 31.12.2008

ex 8529 10 85

Ceramic filter for a centre frequency of 10,7 MHz, with a bandwidth not exceeding 330 kHz at 3 dB and not exceeding 950 kHz at 20 dB, contained in a housing

1.1.2006 to 31.12.2008

ex 8529 10 85

Ceramic filters for frequencies of 4,5 MHz or more but not exceeding 6,6 MHz contained in a housing

1.1.2006 to 31.12.2008

ex 8529 10 85

Ceramic filter for a centre frequency of 450 kHz or more but not exceeding 470 kHz, with a bandwidth not exceeding 13 kHz at 3 dB, contained in a housing

1.1.2006 to 31.12.2008

ex 8529 10 85

Ceramic filter for a frequency of 450 kHz, with a bandwidth not exceeding 18 kHz at 10 dB, contained in a housing

1.1.2006 to 31.12.2008

ex 8529 10 85

Ceramic filter for a centre frequency of 455 kHz (± 1,5 kHz), with a bandwidth not exceeding 25 kHz at 6 dB and not exceeding 60 kHz at 40 dB, contained in a housing

1.1.2006 to 31.12.2008

ex 8529 10 85

Ceramic filter for a centre frequency of 450 kHz (± 1,5 kHz) or 455 kHz (± 1,5 kHz), with a bandwidth not exceeding 30 kHz at 6 dB and not exceeding 70 kHz at 40 dB, contained in a housing

1.1.2006 to 31.12.2008

ex 8529 10 85

Radio frequency (RF) signal isolator for frequencies of 890 MHz or more but not exceeding 1 990 MHz, having an insertion loss not exceeding 0,7 dB, contained in a housing

1.1.2006 to 31.12.2008

ex 8529 10 85

Filters, excluding surface acoustic wave filters, for a centre frequency of 485 MHz or more but not exceeding 1 990 MHz with an insertion loss not exceeding 3,5 dB, contained in a housing

1.1.2006 to 31.12.2008

ex 8529 10 85

Ceramic filter package, excluding surface acoustic wave filters, consisting of:

—	a transmit filter with a centre frequency of 1 747,5 MHz and an insertion loss not exceeding 2,3 dB at a bandwidth of 75 MHz and

—	a receive filter with a centre frequency of 1 842,5 MHz and an insertion loss not exceeding 3,3 dB at a bandwidth of 75 MHz,

the whole contained in a housing

1.1.2006 to 31.12.2008

ex 8529 10 85

Ceramic filter package, excluding surface acoustic wave filters, comprising 2 filters with one of the following combinations of characteristics:

—	a transmit centre frequency of 902,5 MHz, a receive centre frequency of 947,5 MHz and an insertion loss not exceeding 3,2 dB at a bandwidth of 25 MHz or

—	a transmit centre frequency of 1 747,5 MHz, a receive centre frequency of 1 842,5 MHz and an insertion loss not exceeding 3,5 dB at a bandwidth of 75 MHz,

the whole contained in a housing

1.1.2006 to 31.12.2008

ex 8529 10 99

Antenna switch, comprising:

—	a transmit filter with a centre frequency of 942,5 MHz or more but not exceeding 1 990 MHz and

—	a receive filter with a centre frequency of 847,5 MHz or more but not exceeding 1 990 MHz,

the whole contained in a housing

1.1.2006 to 31.12.2008

ex 8529 90 60

ex 8548 90 90

Parts of TV-apparatus, having microprocessor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing

1.1.2006 to 31.12.2008

ex 8529 90 60

Analogue sound recording and reproducing assembly, comprising a record/playback head, a single tape deck mechanism of the cassette type, a spindle electric motor, a rotation direction change mechanism and a chassis

1.1.2006 to 31.12.2008

ex 8529 90 60

Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of television sets (1)

1.1.2006 to 31.12.2008

ex 8529 90 81

Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading 8528 (1)

1.1.2006 to 31.12.2008

ex 8529 90 81

Assembly consisting of a lens unit, having an adjustable focal length of 4 mm or more but not exceeding 69 mm and comprising a zoom encoder, a stepping motor unit, a zoom motor unit, an iris motor unit and a photo interrupter

1.1.2006 to 31.12.2008

ex 8529 90 81

Video recording and reproducing assembly, comprising a tape deck mechanism of the cassette type, comprising a DC motor, for use in the manufacture of products falling within heading 8525 (1)

1.1.2006 to 31.12.2008

ex 8529 90 81

Assembly consisting of a monochrome cathode-ray tube with a diagonal measurement of the screen of 143 mm or more but not exceeding 230 mm and a concave focus lens mounted on a liquid-filled cooling armature

1.1.2006 to 31.12.2008

ex 8529 90 81

ex 8529 90 95

Filter, consisting of 2 piezo-electric crystals each with a frequency of 21 MHz or more but not exceeding 30 MHz and seperately mounted on a bracket, with not more than 7 connections

1.1.2006 to 31.12.2008

ex 8529 90 81

Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors (1)

1.1.2006 to 31.12.2008

ex 8529 90 81

Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors (1)

1.1.2006 to 31.12.2008

ex 8529 90 81

Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and integrated circuits in television sets (1)

1.1.2006 to 31.12.2008

ex 8529 90 81

Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply

1.1.2006 to 31.12.2008

ex 8529 90 81

LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only

1.1.2006 to 31.12.2008

ex 8529 90 95

Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, mounted on a printed circuit board containing at least integrated circuits for controlling the tape deck mechanism functions, video recording functions and TV-signal processing functions, for use in the manufacture of products falling within heading 8528 (1)

1.1.2006 to 31.12.2008

ex 8531 80 95

Indicator lamp, consisting of 4 light-emitting diodes made from silicon-cardide (SiC) semiconductor material, operating at a nominal wavelength of 481, 560 or 630 nm, contained in a housing

1.1.2006 to 31.12.2008

ex 8531 80 95

Indicator lamp, consisting of 2 light-emitting diodes made from aluminium-gallium-arsenic (AlGaAs) or gallium-phosphor (GaP) semiconductor material, having a rectangular base, contained in a housing of the SMD (surface mounted device) type and having a lens

1.1.2006 to 31.12.2008

ex 8531 80 95

Electro-accoustic transducer

1.1.2006 to 31.12.2008

ex 8531 80 95

An electromagnetic display, consisting of 7 electromagnetic coils which by means of the residual magnetism in the stators provide that the last indication remains available (set state), and 7 pivoting light-reflecting segments each of which is attached to a bar magnet; assembly comprising such displays

1.1.2006 to 31.12.2008

ex 8536 30 30

ex 8536 30 90

ex 8536 50 80

Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing

1.1.2006 to 31.12.2008

ex 8536 41 10

ex 8536 41 90

ex 8536 49 00

Thermal relays contained in a hermetically sealed glass cartridge not exceeding 35 mm in length excluding wires, with a maximum leakage rate of 10- 6 cm3 He/sec at one bar in the temperature range 0 to 160 oC, to be incorporated into compressors for refrigerating equipment (1)

1.1.2006 to 31.12.2008

ex 8536 50 11

Switch of the printed circuit mount type, operating at a force of 4,9 N (±0,9 N), contained in a housing

1.1.2006 to 31.12.2008

ex 8536 50 11

Mechanical tact switch for connecting electronic circuits, operating at a voltage not exceeding 60 V and at a current strength not exceeding 50 mA, for use in the manufacture of television sets (1)

1.1.2006 to 31.12.2008

ex 8536 50 15

Rotary switch in form of a wheel with a diameter of between 15 and 16 mm and contacts for closing the circuit, for a rated voltage of 12 V at 50 mA

1.1.2006 to 31.12.2008

ex 8536 50 19

Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections

1.1.2006 to 31.12.2008

ex 8536 50 19

Hydraulic pressure switch, incorporating a pressure sensitive snap action disc, operating at a supply voltage of 6 V or more but not exceeding 18 V

1.1.2006 to 31.12.2008

ex 8536 50 19

ex 8536 50 80

Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing

1.1.2006 to 31.12.2008

ex 8536 50 80

Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time not exceeding 50 ms and an actuating current not exceeding 500 mA at a voltage of 12 V

1.1.2006 to 31.12.2008

ex 8536 50 80

Reed switch having a switching power of 20 W or more within the range of 17 — 43 A.turn, in the form of a glass capsule, not containing mercury, the dimensions of which do not exceed 3 × 21 mm, for use in the manufacture of automotive airbag shock-sensors (1)

1.1.2006 to 31.12.2008

ex 8536 50 80

Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not exceeding 250 V and at a current strength not exceeding 5 A, for use in the manufacture of television sets (1)

1.1.2006 to 31.12.2008

ex 8536 90 85

Metallic stamped frame with connections

1.1.2006 to 31.12.2008

ex 8536 90 85

Contact element with a hold-force of more than 3 N, in the form of 2 rectangular plastic frames interconnected by electric conductors

1.1.2006 to 31.12.2008

ex 8536 90 85

ex 8544 49 80

Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements

1.1.2006 to 31.12.2008

ex 8537 10 99

Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors

1.1.2006 to 31.12.2008

ex 8537 10 99

Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems (1)

1.1.2006 to 31.12.2008

ex 8537 10 99

ex 8543 89 97

Unit consisting of two junction field effect transistors contained in a dual leadframe housing

1.1.2006 to 31.12.2008

ex 8537 10 99

ex 8543 89 97

Unit consisting of two metal oxide semiconductor field effect transistors contained in a dual leadframe housing

1.1.2006 to 31.12.2008

ex 8538 90 99

Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 × 48 mm

1.1.2006 to 31.12.2008

ex 8540 11 11

Colour cathode-ray tube with a slit or slot mask, equipped with electron guns placed side by side (in-line technology) and with a diagonal measurement of the screen of 12 cm or more but not exceeding 26 cm

1.1.2006 to 31.12.2008

ex 8540 11 11

Colour cathode-ray tube, equipped with one gun with three rays and with a diagonal measurement of the screen of 19 cm or more but not exceeding 26 cm

1.1.2006 to 31.12.2008

ex 8540 11 13

Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,42 mm and a diagonal measurement of the screen of 49 cm, for use in the manufacture of professional video monitors including security and medical monitor applications (1)

1.1.2006 to 31.12.2008

ex 8540 11 19

Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 85 cm or more

1.1.2006 to 31.12.2008

ex 8540 11 91

Colour cathode-ray tube with a screen width/height ratio of 16/9 and a diagonal measurement of the screen of 39,8 cm (± 0,3 cm)

1.1.2006 to 31.12.2008

ex 8540 12 00

Monochrome cathode-ray tube with a diagonal measurement of the screen of 250 mm or more but not exceeding 320 mm and an anode voltage of 18 kV or more but not exceeding 22 kV

1.1.2006 to 31.12.2008

ex 8540 12 00

Monochrome cathode-ray tube, with a diagonal measurement of the screen of 150 mm or more but not exceeding 182 mm, a neck diameter of less than 30 mm and an anode voltage of 25 kV or more but not exceeding 32 kV

1.1.2006 to 31.12.2008

ex 8540 12 00

Flat screen monochrome cathode-ray tube, with a diagonal measurement of the screen not exceeding 102 mm

1.1.2006 to 31.12.2008

ex 8540 20 80

Photomultiplier consisting of a photocathode tube with 9 dynodes, for light of a wavelength of 160 nm or more but not exceeding 930 nm, of a diameter not exceeding 14 mm and a height not exceeding 94 mm

1.1.2006 to 31.12.2008

ex 8540 40 00

ex 8540 60 00

Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, with a diagonal measurement of the screen of more than 72 cm and a distance of less than 0,5 mm between dots of the same colour

1.1.2006 to 31.12.2008

ex 8540 40 00

ex 8540 60 00

Colour cathode-ray tube with a dot mask, equipped with 3 electron guns placed side by side (in-line technology) or 1 gun with 3 rays, having a diagonal measurement of the screen not exceeding 72 cm

1.1.2006 to 31.12.2008

ex 8540 40 00

Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,35 mm and a diagonal measurement of the screen not exceeding 53 cm

1.1.2006 to 31.12.2008

ex 8540 40 00

Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,39 mm and a diagonal measurement of the screen of 33 cm or more but not exceeding 38 cm

1.1.2006 to 31.12.2008

ex 8540 40 00

Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,35 mm and a diagonal measurement of the screen not exceeding 72 cm, for use in the manufacture of monitors (1)

1.1.2006 to 31.12.2008

ex 8540 40 00

Colour cathode-ray tube with a slit or slot mask, having a distance between stripes of the same colour of less than 0,30 mm and a diagonal measurement of the screen not exceeding 58 cm

1.1.2006 to 31.12.2008

ex 8540 50 00

ex 8540 60 00

Flat screen monochrome cathode-ray tube, with a diagonal measurement of the screen of 142 mm or more but not exceeding 190 mm, a luminescence of 300 lumen or more but not exceeding 2 000 lumen, a resolution of 0,06 mm or more but not exceeding 0,1 mm, phosphor types P1 or P22 or P53 or P55 or P56, an anode voltage of more than 34 kV, a focus voltage of more than 7 kV and a cathode current of 3 mA or more

1.1.2006 to 31.12.2008

ex 8540 50 00

ex 8540 60 00

Monochrome cathode-ray tube with a diagonal measurement of the screen of 176 mm or more but not exceeding 520 mm and a neck diameter not exceeding 21 mm

1.1.2006 to 31.12.2008

ex 8540 71 00

Continuous wave magnetron with a fixed frequency of 2 460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 8516 50 00 (1)

1.1.2006 to 31.12.2008

ex 8540 89 00

Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons

1.1.2006 to 31.12.2008

ex 8540 89 00

Vacuum fluorescent display tube

1.1.2006 to 31.12.2008

ex 8540 91 00

Electron gun, for use in the manufacture of colour cathode-ray tubes of subheading 8540 40 00 with a diagonal measurement of the screen of 34 cm or more but not exceeding 39 cm (1)

1.1.2006 to 31.12.2008

ex 8540 91 00

Electron gun of colour cathode-ray tubes with an anode voltage of 27,5 kV or more but not exceeding 36 kV

1.1.2006 to 31.12.2008

ex 8540 91 00

Flat masks, with:

I.	-a width of 592,8 mm (+/- 0,5 mm)

II.	-a height of 463,1 mm (+/- 0,5 mm)

III.	-a thickness of 250 μm (+/- 10 μm)

IV.	-a width of the apertures in the centre of 180 μm (+/- 8 μm)

V.	-a width of the apertures at the edge of 210 μm (+/- 8 μm)

1.1.2006 to 31.12.2008

ex 8540 91 00

Slit or slot mask, excluding masks with continuously vertical slits, with a diagonal measurement of 39 cm or less

1.1.2006 to 31.12.2008

ex 8540 91 00

Electron gun for the production of monochrome cathode-ray tubes with a diagonal measurement of the screen of 7,6 cm or more but not exceeding 30,5 cm (1)

1.1.2006 to 31.12.2008

ex 8540 91 00

Assembly for cathode-ray tubes with 2 or more but not more than 6 coils, a plastic support and a metal fixing ring, for the adjustment of display sharpness and/or convergence

1.1.2006 to 31.12.2008

ex 8540 91 00

Slit mask, consisting of continuously vertical slits measuring more than 275 mm in the length

1.1.2006 to 31.12.2008

ex 8540 91 00

Frame of molybdenum chrome steel, for use in the manufacture of cathode-ray tubes (1)

1.1.2006 to 31.12.2008

ex 8540 99 00

Anode, cathode or output part, or an assembly comprising these components (magnetron core tube), for the manufacture of magnetrons of subheading 8540 71 00 (1)

1.1.2006 to 31.12.2008

ex 8543 19 00

Electron beam accelerator systems, with an operating voltage not exceeding 1,5 MV and a beam current not exceeding 70 mA

1.1.2006 to 31.12.2008

ex 8543 89 97

Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing

1.1.2006 to 31.12.2008

ex 8543 89 97

Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not exceeding 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing

1.1.2006 to 31.12.2008

ex 8543 89 97

Rectifier assembly of power barrier diodes, consisting of 2 diodes with an average forward current not exceeding 600 A and a repetitive reverse peak voltage not exceeding 40 V, each contained in a housing and connected by a common cathode

1.1.2006 to 31.12.2008

ex 8543 89 97

Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing

1.1.2006 to 31.12.2008

ex 8543 89 97

Mechanical vibratory gyroscope driven by a 25 or 26 kHz oscillator, comprising a differential amplifier and a detector circuit, contained in a housing

1.1.2006 to 31.12.2008

ex 8543 89 97

Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing

1.1.2006 to 31.12.2008

ex 8543 89 97

Oscillator, with a centre frequency of 20 GHz or more but not exceeding 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing

1.1.2006 to 31.12.2008

ex 8543 89 97

Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a leadframe, contained in a housing

1.1.2006 to 31.12.2008

ex 8543 89 97

Overvoltage suppression assembly, comprising 8 diodes, having a reverse stand-off voltage not exceeding 4,5 V, a reverse leakage current not exceeding 10 μA, a peak pulse current not exceeding 30 A and a nominal capacitance of 50 pF, contained in a housing

1.1.2006 to 31.12.2008

ex 8543 89 97

Charged coupled device (CCD) scanner assembly, for a real-time film scanning system, having optical functions, illumination functions and signal processing functions

1.1.2006 to 31.12.2008

ex 8543 89 97

Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing

1.1.2006 to 31.12.2008

ex 8543 89 97

Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing

1.1.2006 to 31.12.2008

ex 8543 89 97

Fuel cell module consisting of:

—	polymer electrolyte membrane fuel cells in a housing with an integrated cooling system,

—	a voltage monitoring unit and connections,

for use in the manufacture of car propulsion systems (1)

1.1.2006 to 31.12.2008

ex 8543 90 95

Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips

1.1.2006 to 31.12.2008

ex 8543 90 95

Assembly of products falling within heading 8541 or 8542 mounted on a printed circuit, contained in a housing

1.1.2006 to 31.12.2008

ex 8544 60 10

Anode cap cable, for use in the manufacture of fly back transformers (1)

1.1.2006 to 31.12.2008

ex 8545 19 90

Carbon electrodes, for use in the manufacture of zinc-carbon batteries (1)

1.1.2006 to 31.12.2008

ex 8545 90 90

Cell and battery carbon, in the form of rods, with a length of 34 mm or more but not exceeding 160 mm and a diameter not exceeding 12 mm

1.1.2006 to 31.12.2008

ex 8547 10 10

Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not exceeding 250 mm, for the manufacture of vacuum interrupters (1)

1.1.2006 to 31.12.2008

ex 8548 90 90

Parts, for use in the manufacture or the repair of products falling within subheading 8517 21 00 (1)

1.1.2006 to 31.12.2008

ex 8548 90 90

Infrared signal receiver unit, consisting of a photodiode and at least an amplifier in the form of a monolithic integrated circuit, contained in a housing

1.1.2006 to 31.12.2008

ex 8548 90 90

Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not exceeding 40 MHz and a capacitor, contained in a housing

1.1.2006 to 31.12.2008

ex 8548 90 90

ex 9110 90 00

Clock/calendar circuit, consisting of a printed circuit on which are mounted at least a quartz oscillator and a monolithic integrated circuit, the whole contained in a housing

1.1.2006 to 31.12.2008

ex 8548 90 90

Contact image sensor

1.1.2006 to 31.12.2008

ex 8548 90 90

Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 450 nm or more but not exceeding 660 nm, contained in a leadframe housing having a circular opening whose exterior dimensions without fittings — do not exceed 4 x 4 mm

1.1.2006 to 31.12.2008

ex 8548 90 90

Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not exceeding 815 nm

1.1.2006 to 31.12.2008

ex 8548 90 90

LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only

1.1.2006 to 31.12.2008

ex 8711 10 00

Portable motorised scooter, presented unassembled or disassembled

1.1.2006 to 31.12.2008

ex 9001 10 90

Image reverser made up from an assembly of optical fibres

1.1.2006 to 31.12.2008

ex 9001 20 00

Material consisting of a polarising film, supported on one or both sides by transparent material

1.1.2006 to 31.12.2008

ex 9001 90 00

Rear projection screen, comprising a Fresnel lens of plastic and a polarising sheet of plastic, for use in the manufacture of products falling within heading 8528 (1)

1.1.2006 to 31.12.2008

ex 9001 90 00

Lens of plastic, unmounted, having a focal length of 3,86 mm (±0,1 mm) and with a diameter not exceeding 8 mm, for use in the manufacture of compact disc players (1)

1.1.2006 to 31.12.2008

ex 9001 90 00

Optical fibre plate, for use in the manufacture of screens and photocathodes for image intensifiers (1)

1.1.2006 to 31.12.2008

ex 9001 90 00

Rear projection screen, comprising a lenticular plastic plate

1.1.2006 to 31.12.2008

ex 9001 90 00

Prism for the splitting of light, unmounted, for use in the manufacture of charged-coupled image (CCD) cameras (1)

1.1.2006 to 31.12.2008

ex 9001 90 00

Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends

1.1.2006 to 31.12.2008

ex 9001 90 00

Lens of plastic, unmounted, for use in the manufacture of products falling within subheading 9006 40 00 (1)

1.1.2006 to 31.12.2008

ex 9002 11 00

Adjustable lens unit, having a focal length of 90 mm or more but not exceeding 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not exceeding 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors (1)

1.1.2006 to 31.12.2008

ex 9002 11 00

Lens unit, having a focal length of 25 mm or more but not exceeding 150 mm, consisting of glass or plastic lenses, with a diameter of 60 mm or more but not exceeding 190 mm

1.1.2006 to 31.12.2008

ex 9002 11 00

Optical element, comprising one or more mounted lenses of plastic, for use in the manufacture of products falling within subheading 9006 40 00 (1)

1.1.2006 to 31.12.2008

ex 9002 19 00

Lens unit, having a focal length of 24,96 mm (±0,1 mm), a diameter of 16 mm and a length of 16 mm, for use in the manufacture of products falling within subheading 8517 21 00 (1)

1.1.2006 to 31.12.2008

ex 9002 20 00

Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 (1)

1.1.2006 to 31.12.2008

ex 9002 90 00

Lens, mounted, having a fixed focal length of 3,8 mm (±0,19 mm) or 8 mm (±0,4 mm), with a relative aperture of F2.0 and a diameter not exceeding 33 mm, for use in the manufacture of charged-coupled (CCD) cameras (1)

1.1.2006 to 31.12.2008

ex 9002 90 00

Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not exceeding 1,15 mm, embedded between 2 plastic plates

1.1.2006 to 31.12.2008

ex 9002 90 00

Lens and image gate assembly, for a real-time film scanning system, comprising a lens consisting of 9 or 11 elements and having an illumination function

1.1.2006 to 31.12.2008

ex 9002 90 00

Lenses, mounted, for use in the manufacture of projection TV (1)

1.1.2006 to 31.12.2008

ex 9006 91 90

Parts, for use in the manufacture of products falling within subheading 9006 40 00 (1)

1.1.2006 to 31.12.2008

ex 9013 80 90

Polarisation insensitive fibre-optic isolator, operating at a wavelength of 1 200 nm or more, contained in a cylindrical housing

1.1.2006 to 31.12.2008

ex 9013 80 90

Optical switch, comprising at least one optical input and two optical outputs and with electrical connectors

1.1.2006 to 31.12.2008

ex 9017 90 90

Thermal printer head, comprising at least 7 168 heater elements mounted on 2 or more ceramic supports, the whole contained in a housing the exterior dimensions of which exceed 21 × 39 × 639 mm

1.1.2006 to 31.12.2008

ex 9022 30 00

X-ray tube with a target voltage of 4 kV or more but not exceeding 30 kV, a power not exceeding 9 W and a target current not exceeding 2 mA

1.1.2006 to 31.12.2008

ex 9027 10 90

Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing

1.1.2006 to 31.12.2008

ex 9031 80 34

ex 9031 80 38

Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing

1.1.2006 to 31.12.2008

ex 9031 80 38

Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing

1.1.2006 to 31.12.2008

ex 9031 80 38

Machines and apparatus for the automatic testing of the integrity of ink-jet cartridge housings (1)

1.1.2006 to 31.12.2008

ex 9031 90 85

Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing

1.1.2006 to 31.12.2008

ex 9032 10 81

Thermostat, comprising a snap-action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing

1.1.2006 to 31.12.2008

ex 9032 89 00

Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm

1.1.2006 to 31.12.2008

ex 9032 89 00

Electronic controller of eletric power steering (EPS controller)

1.1.2006 to 31.12.2008

ex 9106 90 10

Timer assembly, for use in the manufacture of goods of subheading 8516 50 00 (1)

1.1.2006 to 31.12.2008

ex 9110 12 00

Assembly consisting of a printed circuit on which are mounted one quartz oscillator, at least one watch circuit and, whether or not integrated, at least one capacitor, of a thickness not exceeding 5 mm

1.1.2006 to 31.12.2008

ex 9110 90 00

ex 9114 90 00

Assembly consisting of a printed circuit on which is mounted a watch circuit or a watch circuit and a quartz oscillator, of a thickness not exceeding 5 mm

1.1.2006 to 31.12.2008'

ex 9110 90 00

Assembly consisting of a printed circuit on which is mounted at least one watch circuit, a quartz oscillator and a piezo-electric sound element, with a thickness exceeding 5 mm

1.1.2006 to 31.12.2008

ex 9405 40 35

Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (±0,2 mm), of a length of 420 mm (±1 mm) or more, but not exceeding 600 mm (±1 mm), for the manufacture of goods of heading 8528 (1)

1.1.2006 to 31.12.2008

ex 9608 91 00

Non-fibrous plastic pen-tips with an internal channel

1.1.2006 to 31.12.2008

ex 9608 91 00

Felt tips and other porous-tips for markers, without internal canal

1.1.2006 to 31.12.2008

ex 9612 10 10

Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)

1.1.2006 to 31.12.2008

ex 9613 90 00

Piezo-electric ignition mechanism, whether or not with complementary elements

1.1.2006 to 31.12.2008

(1) Entry under this subheading is subject to conditions laid down in the relevant Community provisions (see Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253, 11.10.1993 p. 1 and subsequent amendments)).

(2) However, the suspension is not allowed where processing is carried out by retail or catering undertakings.

(3) The suspension shall apply to fish intended to undergo any operation unless they are intended to undergo exclusively one or more of the following operations:

—	cleaning, gutting, tailing, heading,

—	cutting (excluding filleting or cutting of frozen blocks, or splitting of frozen interleaved fillet blocks),

—	sampling, sorting,

—	labelling,

—

packing,

—

chilling,

—

freezing,

—	deep freezing,

—	thawing, separation.

The suspension is not allowed for products intended, in addition, to undergo treatment (or operations) qualifying for suspension where such treatment (or operations) is (are) carried out at retail or catering level. The suspension of customs duties shall apply only to fish intended for human consumption.’

25.2.2006

EN XM XM

Official Journal of the European Union

L 56/75

COUNCIL DECISION

of 24 January 2006

appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2006 to 25 January 2010

(2006/116/EC)

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty establishing the European Community, and in particular Article 263 thereof,

Having regard to the proposals made by the governments of the Member States,

Whereas:

(1)	Article 263 of the EC Treaty requires that members or alternate members of the Committee of the Regions, besides being representatives of regional or local bodies, ‘either hold a regional or local authority electoral mandate or are politically accountable to an elected assembly’.

(2)	As the term of office of the members and alternate members of the Committee of the Regions is due to expire on 25 January 2006, new members and alternate members should be appointed to the Committee of the Regions,

HAS DECIDED AS FOLLOWS:

Article 1

The following are hereby appointed to the Committee of the Regions for the period from 26 January 2006 to 25 January 2010:

—	as members, the persons listed by Member State in Annex I,

—	as alternate members, the persons listed by Member State in Annex II.

Article 2

This Decision shall be published in the Official Journal of the European Union.

It shall take effect on the date of its adoption.

Done at Brussels, 24 January 2006.

For the Council

The President

K.-H. GRASSER

ANEXO I — PŘÍLOHA I — BILAG I — ANHANG I — I LISA

ΠΑΡΑΡΤΗΜΑ Ι — ANNEX I — ANNEXE I — ALLEGATO I — I PIELIKUMS

I PRIEDAS — I. MELLÉKLET — ANNESS I — BIJLAGE I — ZAŁĄCZNIK I

ANEXO I — PRÍLOHA I — PRILOGA I — LIITE I — BILAGA I

Miembros / Členové / Medlemmer / Mitglieder / Liikmed

Μέλη / Members / Membres / Membri / Locekļi

Nariai / Tagok / Membri / Leden / Członkowie

Membros / Členovia / Člani / Jäsenet / Ledamöter

BELGIË / BELGIQUE / BELGIEN

De heer Gilbert BOSSUYT

Vlaams volksvertegenwoordiger

De heer Geert BOURGEOIS

Minister van de Vlaamse regering

De heer Jos CHABERT

Brussels parlementslid

M. Jean-François ISTASSE

Député de la Communauté française

Mme Joëlle KAPOMPOLE

Députée de la Communauté française

Herr Karl-Heinz LAMBERTZ

Ministerpräsident der Regierung der Deutschsprachigen Gemeinschaft

M. Michel LEBRUN

Député wallon

De heer Yves LETERME

Minister-president van de Vlaamse regering

Mevrouw Fientje MOERMAN

Vice-minister-president van de Vlaamse regering

M. Charles PIQUÉ

Ministre-président du gouvernement de la région de Bruxelles-Capitale

M. Jean-Claude VAN CAUWENBERGHE

Député wallon

De heer Luc VAN DEN BRANDE

Vlaams volksvertegenwoordiger

ČESKÁ REPUBLIKA

pan Pavel BÉM

Lord Mayor of the Capital City of Prague, president of the delegation

(primátor hlavního města Prahy, vedoucí delegace)

pan Ondřej BENEŠÍK

Member of the Regional Assembly of Zlínský kraj

(člen zastupitelstva Zlínského kraje)

pan František DOHNAL

Deputy of the President of the Regional Council of Vysočina kraj

(náměstek hejtmana kraje Vysočina)

pan Roman LÍNEK

Deputy of the President of the Regional Council of Pardubický kraj

(náměstek hejtmana Pardubického kraje)

pan Josef PAVEL

President of the Regional Council of Karlovarský kraj

(hejtman Karlovarského kraje)

pan Evžen TOŠENOVSKÝ

President of the Regional Council of Moravskoslezský kraj

(hejtman Moravskoslezského kraje)

pan Jan ZAHRADNÍK

President of the Regional Council of Jihočeský kraj

(hejtman Jihočeského kraje)

pan Petr GANDALOVIČ

Lord Mayor of the City of Ústí nad Labem, Ústecký kraj

(primátor města Ústí nad Labem, Ústecký kraj)

pan Jaroslav HANÁK

Mayor of the City of Veselí nad Moravou, Jihomoravský kraj

(starosta města Veselí nad Moravou, Jihomoravský kraj)

paní Helena LANGŠÁDLOVÁ

Mayor of the Municipality of Černošice, Středočeský kraj

(starostka města Černošice, Středočeský kraj)

pan Martin TESAŘÍK

Lord Mayor of the City of Olomouc, Olomoucký kraj

(primátor města Olomouce, Olomoucký kraj)

pan Tomáš ÚLEHLA

Mayor of the City of Zlín, Zlínský kraj

(primátor města Zlína, Zlínský kraj)

DANMARK

Helene LUND

Byrådsmedlem

Henning JENSEN

Borgmester

Johannes FLENSTED-JENSEN

Amtsborgmester

Johnny SØTRUP

Borgmester

Knud ANDERSEN

Regionsrådsmedlem

Lars ABEL

Amtsrådsmedlem

Laust GROVE VEJLSTRUP

Kommunalbestyrelsesmedlem

Tove LARSEN

Borgmester

Vibeke STORM RASMUSSEN

Amtsborgmester

DEUTSCHLAND

Herr Willi STÄCHELE

Mitglied des Landtages von Baden-Württemberg

Herr Peter STRAUB

Mitglied des Landtages von Baden-Württemberg

Herr Eberhard SINNER

Mitglied des Landtages des Freistaates Bayern; Staatsminister für Europaangelegenheiten und Regionale Beziehungen in der Staatskanzlei

Frau Prof. Ursula MÄNNLE

Mitglied des Landtages des Freistaates Bayern

Frau Monika HELBIG

Bevollmächtigte des Landes Berlin

Herr Dr. Gerd HARMS

Bevollmächtigter des Landes Brandenburg für Bundes- und Europaangelegenheiten und Staatssekretär in der Staatskanzlei

Frau Kerstin KIESSLER

Staatsrätin, Mitglied des Senats

Frau Sandra SPECKERT

Mitglied der Bremischen Bürgerschaft

Herr Rolf HARLINGHAUSEN

Mitglied des Europaausschusses der Hamburgischen Bürgerschaft

Herr Jochen RIEBEL

Minister für Bundes- und Europaangelegenheiten und Bevollmächtigter beim Bund

Herr Helmut HOLTER

Minister für Arbeit, Bau und Landesentwicklung Mecklenburg-Vorpommern

Herr Hermann DINKLA

Mitglied des Landtages, Niedersachsen

Herr Wolfgang GIBOWSKI

Staatssekretär, Bevollmächtigter des Landes Niedersachsen beim Bund

Herr Werner JOSTMEIER

Mitglied des Landtages, Nordrhein-Westfalen

Herr Dietmar BROCKES

Mitglied des Landtages, Nordrhein-Westfalen

Herr Dr. Karl-Heinz KLÄR

Bevollmächtigter des Landes Rheinland-Pfalz beim Bund und für Europa

Herr Karl RAUBER

Mitglied des Landtages des Saarlandes; Minister für Bundes- und Europaangelegenheiten und Chef der Staatskanzlei

Herr Hermann WINKLER

Mitglied des Landtages, Staatsminister und Chef der Staatskanzlei des Freistaates Sachsen

Herr Dr. Michael SCHNEIDER

Staatssekretär, Bevollmächtigter des Landes Sachsen-Anhalt beim Bund

Herr Uwe DÖRING

Minister für Justiz, Arbeit und Europa des Landes Schleswig-Holstein

Herr Gerold WUCHERPFENNIG

Minister für Bundes- und Europaangelegenheiten und Chef der Staatskanzlei

Herr Helmut M. JAHN

Landrat des Hohenlohekreises

Herr Hans-Josef VOGEL

Bürgermeister der Stadt Arnsberg

Herr Ulrich MALY

Oberbürgermeister der Stadt Nürnberg

EESTI

Väino HALLIKMÄGI

Member of Pärnu Town Council

(Pärnu Linnavolikogu liige)

Saima KALEV

Mayor of Jõgeva

(Jõgeva vallavanem)

Teet KALLASVEE

Mayor of Haapsalu

(Haapsalu linnapea)

Margus LEPIK

Mayor of Valga

(Valga linnapea)

Kurmet MÜÜRSEPP

Member of Antsla Municipality Council

(Antsla Vallavolikogu liige)

Dr. Uno SILBERG

Chairman of Kose Municipality Council

(Kose Vallavolikogu esimees)

Toomas VITSUT

Chairman of Tallinn

(Tallinna Linnavolikogu esimees)

ΕΛΛΑΔΑ

Φώφη ΓΕΝΝΗΜΑΤΑ

Πρόεδρος Διευρυμένης Ν. Α. Αθηνών-Πειραιά

Πρόεδρος ΕΝΑΕ

Χρήστος ΧΑΤΖΟΠΟΥΛΟΣ

Πρόεδρος Διευρυμένης Ν. Α. Έβρου-Ροδόπης

Κωνσταντίνος ΤΑΤΣΗΣ

Πρόεδρος Διευρυμένης Ν. Α. Ξάνθης-Δράμας-Καβάλας

Γιάννης ΣΓΟΥΡΟΣ

Νομάρχης Αθηνών

Δημήτριος ΣΤΑΜΑΤΗΣ

Νομάρχης Αιτωλοακαρνανίας

Πάρις ΚΟΥΚΟΥΛΟΠΟΥΛΟΣ

Δήμαρχος Κοζάνης

Πρόεδρος ΚΕΔΚΕ

Θεοδώρα ΜΠΑΚΟΓΙΑΝΝΗ

Δήμαρχος Αθηναίων

Ανδρέας ΚΑΡΑΒΟΛΑΣ

Δήμαρχος Πατραίων

Παναγιώτης ΤΖΑΝΙΚΟΣ

Δήμαρχος Αμαρουσίου

Παύλος ΚΑΜΑΡΑΣ

Δήμαρχος Πεύκης-Αττικής

Χρήστος ΠΑΛΑΙΟΛΟΓΟΣ

Δημοτικός Σύμβουλος Δήμου Λειβαδέων

Κωνσταντίνος ΤΖΑΤΖΑΚΗΣ

Δημοτικός Σύμβουλος Δήμου Πειραιά

ESPAÑA

Sr. Juan José IBARRETXE MARKUARTU

Presidente de la Comunidad Autónoma del País Vasco

Sr. Pascual MARAGALL I MIRA

Presidente de la Comunidad Autónoma de Cataluña

Sr. Emilio PÉREZ TOURIÑO

Presidente de la Comunidad Autónoma de Galicia

Sr. Manuel CHAVES GONZÁLEZ

Presidente de la Comunidad Autónoma de Andalucía

Sr. Vicente Alberto ÁLVAREZ ARECES

Presidente del Principado de Asturias

Sr. Miguel Ángel REVILLA ROIZ

Presidente de la Comunidad Autónoma de Cantabria

Sr. Pedro SANZ ALONSO

Presidente de la Comunidad Autónoma de La Rioja

Sr. Ramón Luis VALCÁRCEL SISO

Presidente de la Comunidad Autónoma de la Región de Murcia

Sr. Francisco CAMPS ORTIZ

Presidente de la Comunidad Autónoma Valenciana

Sr. Marcelino IGLESIAS RICOU

Presidente de la Comunidad Autónoma de Aragón

Sr. José María BARREDA FONTES

Presidente de la Comunidad Autónoma de Castilla-La Mancha

Sr. Adán MARTÍN MENIS

Presidente de la Comunidad Autónoma de Canarias

Sr. Miguel SANZ SESMA

Presidente de la Comunidad Foral de Navarra

Sr. Juan Carlos RODRÍGUEZ IBARRA

Presidente de la Comunidad Autónoma de Extremadura

Sr. Jaume MATAS PALOU

Presidente de la Comunidad Autónoma de las Illes Balears

Sra. Esperanza AGUIRRE GIL DE BIEDMA

Presidenta de la Comunidad Autónoma de Madrid

Sr. Juan Vicente HERRERA CAMPO

Presidente de la Comunidad Autónoma de Castilla y León

Sr. Francisco José VÁZQUEZ VÁZQUEZ

Alcalde de La Coruña

Sr. Alberto RUIZ-GALLARDÓN JIMÉNEZ

Alcalde de Madrid

Sr. Joan CLOS I MATHEU

Alcalde de Barcelona

Sra. Rita BARBERÁ NOLLA

Alcaldesa de Valencia

FRANCE

M. Alfred ALMONT

Maire de Schoelcher

M. Olivier BERTRAND

Maire de Saint-Sylvain-de-Bellegarde

M. Jacques BLANC

Conseiller régional de Languedoc-Roussillon

M. Jean-Paul BORE

Premier vice-président du Conseil régional du Languedoc-Roussillon

M. Bruno BOURG-BROC

Maire de Châlons-en-Champagne

Mme Claudette BRUNET-LECHENAULT

Vice-présidente du Conseil général de Saône-et-Loire

M. Michel DELEBARRE

Maire de Dunkerque

M. Jean-Louis DESTANS

Président du Conseil général de l'Eure

M. Raymond FORNI

Président du Conseil régional de Franche-Comté

Mme Claude du GRANRUT

Conseillère régionale de Picardie

M. Jean-Louis JOSEPH

Maire de la Bastidonne

M. Jean-Yves LE DRIAN

Président du Conseil régional de Bretagne

M. Alain LE VERN

Président du Conseil régional de Haute-Normandie

M. Philippe LEROY

Président du Conseil général de la Moselle

M. Jean-Jacques LOZACH

Président du Conseil général de la Creuse

M. Daniel PERCHERON

Président du Conseil régional du Nord-Pas-de-Calais

M. Jean-Vincent PLACE

Conseiller régional de l'Île-de-France

M. Jean PRORIOL

Conseiller régional d'Auvergne

M. Jean PUECH

Président du Conseil général de l'Aveyron

M. Camille de ROCCA-SERRA

Président de l'Assemblée de Corse

M. Alain ROUSSET

Président du Conseil régional d'Aquitaine

Mme Juliette SOULABAILLE

Maire de Corps-Nuds

M. Bernard SOULAGE

Premier vice-président du Conseil régional de Rhône-Alpes

M. Michel THIERS

Vice-président du Conseil général du Rhône

IRELAND

Councillor Seamus MURRAY

Member of Meath County Council

Councillor Constance HANNIFFY

Member of Offaly County Council

Councillor Cathal CROWE

Member of Clare County Council

Councillor Patrick MCGOWAN

Member of Donegal County Council

Councillor Declan MCDONNELL

Member of Galway City Council

Councillor Michael FITZGERALD

Member of South Tipperary County Council

Councillor Denis LANDY

Member of South Tipperary County Council

Councillor Maria CORRIGAN

Member of Dun Laoghaire/Rathdown County Council

Councillor Paul O'DONOGHUE

Member of Kerry County Council

ITALIA

Sig. Antonio BASSOLINO

Presidente della Regione CAMPANIA

Sig.ra Mercedes BRESSO

Presidente della Regione PIEMONTE

Sig. Claudio BURLANDO

Presidente della Regione LIGURIA

Sig. Luciano CAVERI

Consigliere regionale/Presidente della Regione VALLE D'AOSTA

Sig. Ottaviano DEL TURCO

Presidente della Regione ABRUZZO

Sig. Luis DURNWALDER

Consigliere regionale/Presidente Provincia autonoma di BOLZANO

Sig. Fabio GAVA

Consigliere regionale/Assessore alla Regione VENETO

Sig. Massimo Gianluca GUARISCHI

Consigliere della Regione LOMBARDIA

Sig. Agazio LOIERO

Presidente della Regione CALABRIA

Sig. Pietro MARRAZZO

Presidente della Regione LAZIO

Sig. Claudio MARTINI

Presidente della Regione TOSCANA

Sig. Renato SORU

Presidente della Regione SARDEGNA

Sig. Gian Mario SPACCA

Presidente della Regione MARCHE

Sig. Nicola VENDOLA

Presidente della Regione PUGLIA

Sig. Enrico BORGHI

Consigliere comunale di VOGOGNA (VB)

Sig. Paolo FONTANELLI

Sindaco di PISA

Sig. Giancarlo GABBIANELLI

Sindaco di VITERBO

Sig. Isidoro GOTTARDO

Consigliere comunale di SACILE (PN)

Sig. Vito SANTARSIERO

Sindaco di POTENZA

Sig.ra Mara Enrica SCAGNI

Sindaco di ALESSANDRIA

Sig. Bruno MARZIANO

Presidente Provincia Regionale di SIRACUSA

Sig.ra Sonia MASINI

Presidente Provincia di REGGIO EMILIA

Sig. Guido MILANA

Consigliere provinciale di Roma

Sig. Roberto PELLA

Consigliere provinciale di BIELLA

ΚYΠΡΟΣ

Michael ZAMPELAS,

Mayor of Nicosia

Christos MESIS,

Mayor of Mesa Yitonia

Fidias SARIKAS,

Mayor of Paphos

George GEORGIOU,

Mayor of Kato Polemidia

George IACOVOU,

President of the Community Council of Ayioi Trimithias

Spyros ELENODOROU,

President of the Community Council of Oroklini

LATVIJA

Mr. Uldis AUGULIS

Chairman of Bērze Local Municipality

(Bērzes pagasta padomes priekšsēdētājs)

Mr. Edvīns BARTKEVIČS

Chairman of Ogre Amalgamated Municipality Council

(Ogres novada domes priekšsēdētājs)

Mr. Andris ELKSNĪTIS

Chairman of Dobele Town Council

(Dobeles pilsētas domes priekšsēdētājs)

Mr. Edmunds KRASTIŅŠ

Councillor of Rīga City Council

(Rīgas pilsētas domes deputāts)

Mr. Guntars KRIEVIŅŠ

Councillor of Liepāja City Council

(Liepājas pilsētas domes deputāts)

Mr. Tālis PUĶĪTIS

Chairman of Sigulda Amalgamated Municipality Council

(Siguldas novada domes priekšsēdētājs)

Mr. Edgars ZALĀNS

Chairman of Kuldīga Town Council, Chairman of Kuldīga District Council

(Kuldīgas pilsētas domes priekšsēdētājs, Kuldīgas rajona padomes priekšsēdētājs)

LIETUVA

Arnoldas ABRAMAVIČIUS

Zarasai district municipal council (member)

(Zarasų rajono savivaldybės taryba (narys))

Antanas GUSTAITIS

Prienai district municipal council (member, mayor)

(Prienų rajono savivaldybės taryba (narys, meras))

Raimundas JAKUTIS

Šiauliai district municipal council (member)

(Šiaulių rajono savivaldybės taryba (narys))

Virginija LUKOŠIENĖ

Klaipėda County Council of the Development of the Region (chairman)

(Klaipėdos apskrities Regiono plėtros taryba (viršininkė))

Ričardas MALINAUSKAS

Druskininkai municipal council (member, mayor)

(Druskininkų savivaldybės taryba (narys, meras))

Vitas MATUZAS

Panevėžys city municipal council (member, mayor)

(Panevėžio miesto savivaldybės taryba (narys, meras))

Gediminas PAVIRŽIS

Vilnius city municipal council (member, deputy mayor)

(Vilniaus miesto savivaldybės taryba (narys, mero pavaduotojas))

Aidas VAIŠNORA

Kazlų Rūda municipal council (member, mayor)

(Kazlų Rūdos savivaldybės taryba (narys, meras))

Vytautas VIGELIS

Švenčioniai district municipal council (member, mayor)

(Švenčionių rajono savivaldybės taryba (narys, meras))

LUXEMBOURG

Mme Simone BEISSEL

Membre du conseil communal de la ville de Luxembourg

Mme Agnès DURDU

Membre du conseil communal de la commune de Wincrange

M. Albert LENTZ

Membre du conseil communal de la commune de Mersch

M. Paul-Henri MEYERS

Membre du conseil communal de la ville de Luxembourg

M. Étienne SCHNEIDER

Membre du conseil communal de la commune de Kayl

M. Romain SCHNEIDER

Membre du conseil communal de la ville de Wiltz

MAGYARORSZÁG

VARGA Zoltán

member of County Assembly

(a megyei közgyűlés tagja)

BENKŐ Ferenc

mayor

(polgármester)

BOR Imre

member of local government

(a helyi önkormányzat tagja)

Dr. IPKOVICH György

mayor

(polgármester)

BIHARY Gábor

member of Budapest General Assembly

(a Fővárosi Közgyűlés tagja)

DIÓSSY László

mayor

(polgármester)

Dr. FÁBIÁN Zsolt

member of local government

(a helyi önkormányzat tagja)

KÁLI Sándor

mayor

(polgármester)

MOLNÁR Árpád

member of County Assembly

(a megyei közgyűlés tagja)

Dr. SÉRTŐ-RADICS István

mayor

(polgármester)

SZABÓ Gyula

member of County Assembly

(a megyei közgyűlés tagja)

Dr. WEKLER Ferenc

mayor

(polgármester)

MALTA

Ms Claudette ABELA BALDACCHINO

Deputy Mayor, Qrendi Local Council

Ms Doris BORG

Mayor, Birkirkara Local Council

Mr. Michael COHEN

Mayor, Kalkara Local Council

Mr. Noel FORMOSA

Mayor, San Lawrenz Local Council

Dr Ian MICALLEF

Councillor, Gzira Local Council

NEDERLAND

De heer P.A. (Piet) BIJMAN

Gedeputeerde van de provincie Fryslân

Mevrouw H.M.C. (Lenie) DWARSHUIS-van de BEEK

Gedeputeerde van de provincie Zuid-Holland

De heer H. (Harry) DIJKSMA

Gedeputeerde van de provincie Flevoland

De heer A.Ph. (Fons) HERTOG

Burgemeester van de gemeente Haarlemmermeer

De heer O. (Onno) HOES

Gedeputeerde van de provincie Noord-Brabant

De heer G.J. (Geert) JANSEN

Commissaris van de Koningin van de provincie Overijssel

De heer J.P.J. (Jan Pieter) LOKKER

Gedeputeerde van de provincie Utrecht

De heer I.W. (Ivo) OPSTELTEN

Burgemeester van de gemeente Rotterdam

De heer A.G.J.M. (Ton) ROMBOUTS

Burgemeester van de gemeente 's-Hertogenbosch

De heer N.P.M. (Nico) SCHOOF

Burgemeester van de gemeente Alphen aan de Rijn

De heer P.T. (Pieter) van WOENSEL

Wethouder van de gemeente Den Haag

De heer R.L. (Ruud) VREEMAN

Burgemeester van de gemeente Tilburg

ÖSTERREICH

Frau Mag. Gabriele BURGSTALLER

Landeshauptfrau von Salzburg

Herr Dr. Jörg HAIDER

Landeshauptmann von Kärnten

Herr Dr. Michael HÄUPL

Landeshauptmann von Wien

Herr Dipl.-Ing. Markus LINHART

Bürgermeister der Stadt Bregenz

Herr Hans NIESSL

Landeshauptmann von Burgenland

Herr Dr. Erwin PRÖLL

Landeshauptmann von Niederösterreich

Herr Dr. Josef PÜHRINGER

Landeshauptmann von Oberösterreich

Herr Dr. Herbert SAUSGRUBER

Landeshauptmann von Vorarlberg

Herr Dr. Heinz SCHADEN

Bürgermeister der Stadt Salzburg

Herr Dr. Herwig VAN STAA

Landeshauptmann von Tirol

Herr Mag. Franz VOVES

Landeshauptmann von Steiermark

Herr Prof. Walter ZIMPER

Gemeinderat in Markt Piesting

POLSKA

Pan Andrzej BOCHEŃSKI

Marshall of the Lubuskie voivodship

(Marszałek województwa lubuskiego)

Pan Krzysztof CIACH

Starosta of the Stargard Szczeciński poviat

(Starosta powiatu stargardzkiego)

Pan Michał CZARSKI

Marshall of the Śląskie voivodship

(Marszałek województwa śląskiego)

Pan Andrzej CZERNECKI

Mayor of the city of Jasło

(Burmistrz miasta Jasła)

Pan Rafał DUTKIEWICZ

President of the city of Wrocław

(Prezydent miasta Wrocławia)

Pan Maciej KOBYLIŃSKI

President of the city of Słupsk

(Prezydent miasta Słupska)

Pan Witold KROCHMAL

Mayor of the city of Wołów

(Burmistrz miasta Wołowa)

Pan Jerzy KROPIWNICKI

President of the city of Łódz

(Prezydent miasta Łodzi)

Pan Henryk MAKAREWICZ

Councillor of the Sejmik of the Lubelskie voivodship

(Radny Sejmiku województwa lubelskiego)

Pan Stanisław RAKOCZY

Starosta of the Kluczbork poviat

(Starosta powiatu kluczborskiego)

Pani Bożena RONOWICZ

President of the city of Zielona Góra

(Prezydent miasta Zielonej Góry)

Pan Andrzej RYŃSKI

Marshall of the Warmińsko-Mazurskie voivodship

(Marszałek województwa warmińsko-mazurskiego)

Pan Janusz SEPIOŁ

Marshall of the Małopolskie voivodship

(Marszałek województwa małopolskiego)

Pan Adam STRUZIK

Marshall of the Mazowieckie voivodship

(Marszałek województwa mazowieckiego)

Pan Brunon SYNAK

Chairman of the Sejmik of the Pomorskie voivodship

(Przewodniczący Sejmiku województwa pomorskiego)

Pan Leszek ŚWIĘTALSKI

Voit of the municipality of Stare Bogaczowice

(Wójt gminy Stare Bogaczowice)

Pan Mieczysław TEODORCZYK

Councillor of the Sejmik of the Łódzkie voivodship

(Radny Sejmiku województwa łódzkiego)

Pan Ludwik WĘGRZYN

Starosta of the Bochnia poviat

(Starosta powiatu bocheńskiego)

Pan Franciszek WOŁODŹKO

Marshall of the Świętokrzyskie voivodship

(Marszałek województwa świętokrzyskiego)

Pan Marek WOŹNIAK

Marshall of the Wielkopolskie voivodship

(Marszałek województwa wielkopolskiego)

Pan Jerzy ZAJĄKAŁA

Voit of the municipality of Łubianka

(Wójt gminy Łubianka)

PORTUGAL

Alberto João CARDOSO GONÇALVES JARDIM

Presidente do Governo Regional da Madeira

António PAULINO DA SILVA PAIVA

Presidente da Câmara Municipal de Tomar

Carlos Alberto SANTOS TUTA

Presidente da Câmara Municipal de Monchique

Carlos Manuel MARTINS DO VALE CÉSAR

Presidente do Governo Regional dos Açores

Carlos Manuel RODRIGUES PINTO DE SÁ

Presidente da Câmara Municipal de Montemor-o-Novo

Fernando de CARVALHO RUAS

Presidente da Câmara Municipal de Viseu

Francisco SOARES MESQUITA MACHADO

Presidente da Câmara Municipal de Braga

Joaquim MOREIRA RAPOSO

Presidente da Câmara Municipal da Amadora

José Luís CARNEIRO

Presidente da Câmara Municipal de Baião

José MACÁRIO CORREIA

Presidente da Câmara Municipal de Tavira

Manuel do NASCIMENTO MARTINS

Presidente da Câmara Municipal de Vila Real

Rui Fernando da SILVA RIO

Presidente da Câmara Municipal do Porto

SLOVENIJA

gospod Janko HALB

Mayor of the Municipality Rogašovci

(župan občine Rogašovci)

gospod Boštjan KOVAČIČ

Mayor of the City Municipality Novo mesto

(župan občine Novo mesto)

gospa Breda PEČAN

Mayor of the Municipality Izola

(županja občine Izola)

gospod Anton SMOLNIKAR

Mayor of the Municipality Kamnik

(župan občine Kamnik)

gospod Robert SMRDELJ

Mayor of the Municipality Pivka

(župan občine Pivka)

gospod Boris SOVIČ

Mayor of the City Municipality Maribor

(župan občine Maribor)

gospod Tomaž ŠTEBE

Mayor of the Municipality Mengeš

(župan občine Mengeš)

SLOVENSKO

pán Rudolf BAUER

President of the Košice Self-governing Region

(predseda Košického samosprávneho kraja)

pán Milan BELICA

President of the Nitra Self-governing Region

(predseda Nitrianskeho samosprávneho kraja)

pán Milan BENČ

Mayor of the City of Prešov

(primátor mesta Prešova)

pán Jozef BOBÍK

Mayor of the City of Michalovce

(primátor mesta Michaloviec)

pán Peter CHUDÍK

President of the Prešov Self-governing Region

(predseda Prešovského samosprávneho kraja)

pán Milan MARČOK

President of the Banská Bystrica Self-governing Region

(predseda Banskobystrického samosprávneho kraja)

pán Ján ORAVEC

Mayor of the City of Štúrovo

(primátor mesta Štúrova)

pán Alexander SLAFKOVSKÝ

Mayor of the City of Liptovský Mikuláš

(primátor mesta Liptovského Mikuláša)

pán Jozef TARČÁK

President of the Žilina Self-governing Region

(predseda Žilinského samosprávneho kraja)

SUOMI

Risto ERVELÄ

Varsinais-Suomen liiton maakuntavaltuuston puheenjohtaja

Pauliina HAIJANEN

Varsinais-Suomen liiton maakuntahallituksen jäsen

Auli HYVÄRINEN

Keminmaan kunnanvaltuuston jäsen

Risto KOIVISTO

Pirkanmaan liiton maakuntahallituksen puheenjohtaja

Veikko KUMPUMÄKI

Lapin liiton maakuntavaltuuston jäsen

Elina LEHTO

Lohjan kaupunginjohtaja

Antti LIIKKANEN

Rovaniemen kaupunginvaltuuston jäsen

Jyrki MYLLYVIRTA

Mikkelin kaupunginjohtaja

Britt LUNDBERG

Landskapsregeringsledamot

Ahvenanmaa/Åland

SVERIGE

Uno ALDEGREN

Ordförande i regionstyrelsen, Skåne läns landsting

Ann BESKOW

Ordförande i kommunstyrelsen, Orsa kommun

Anders GUSTÂV

Ordförande i kommunstyrelsen, Solna kommun

Henrik HAMMAR

Regionråd, ledamot i regionstyrelsen, Skåne läns landsting

Aldo ISKRA

Ledamot i kommunfullmäktige, Malmö kommun

Kent JOHANSSON

Regionråd, ledamot i regionstyrelsen i Västra Götalands läns landsting

Roger KALIFF

Ordförande i kommunfullmäktige, Kalmar kommun

Anders KNAPE

Kommunalråd, ledamot i kommunstyrelsen, Karlstads kommun

Lars NORDSTRÖM

Ledamot i regionfullmäktige, Västra Götalands läns landsting

Mona-Lisa NORRMAN

Ledamot i landstingsfullmäktige, Jämtlands läns landsting

Anneli STARK

Regionråd, ledamot i regionstyrelsen i Västra Götalands läns landsting

Catarina TARRAS-WAHLBERG

Biträdande finansborgarråd, ledamot i kommunstyrelsen, Stockholms kommun

UNITED KINGDOM OF GREAT BRITAIN AND NORTHERN IRELAND

Ms Jeanette ARNOLD AM

Member of London Assembly

Councillor Joan ASHTON (F)

Member of Boston Borough Council

Councillor Paula BAKER (F)

Member of Basingstoke and Deane Council

Councillor Ken BODFISH OBE (M)

Member of Brighton and Hove City Council

Councillor Sir Albert BORE (M)

Member of Birmingham City Council

Councillor Olive BROWN (F)

Member of Wear Valley District Council

Mrs Rosemary BUTLER AM

Member of National Assembly for Wales

Councillor Andrew R CAMPBELL CBE (M)

Member of Dumfries and Galloway Council

Councillor Flo CLUCAS (F)

Member of Liverpool City Council

Councillor Ruth COLEMAN (F)

Member of North Wiltshire District Council

Sir Simon DAY (M)

Member of Devon County Council

Councillor Martin HEATLEY (M)

Member of Warwickshire County Council

Councillor Gordon KEYMER CBE (M)

Member of Tandridge District Council

Councillor Corrie McCHORD

Member of Stirling Council

Rt Hon Jack MCCONNELL MSP (M)

Member of the Scottish Parliament

Mr Conor MURPHY MP MLA

Member of Northern Ireland Assembly

Ms Irene OLDFATHER MSP

Member of Scottish Parliament

Councillor Stephen PARNABY (M)

Member of East Riding of Yorkshire Council

Councillor David PARSONS (M)

Member of Leicestershire County Council

Councillor Edwin POOTS MLA (M)

Member of Lisburn City Council

Councillor Dave QUAYLE (M)

Member of Trafford Metropolitan Borough Council

Councillor the Lord (Graham) TOPE AM CBE (M)

Member of London Borough of Sutton

Councillor Keith WALTERS (M)

Member of Cambridgeshire County Council

Councillor W J WILLIAMS (M)

Member of Isle of Anglesey County Council

ANEXO II — PŘÍLOHA II — BILAG II — ANHANG II — II LISA

ΠΑΡΑΡΤΗΜΑ IΙ — ANNEX II — ANNEXE II — ALLEGATO II — II PIELIKUMS

II PRIEDAS — II. MELLÉKLET — ANNESS II — BIJLAGE II — ZAŁĄCZNIK II

ANEXO II — PRÍLOHA II — PRILOGA II — LIITE II — BILAGA II

Suplentes / Náhradníci / Suppleanter / Stellvertreter / Asendusliikmed

Αναπληρωτές / Alternates / Suppléants / Supplenti / Aizstājēji

Pakaitiniai nariai / Póttagok / Sostituti / Plaatsvervangers / Zastępcy

Suplentes / Náhradníci / Nadomestni člani / Varaedustajat / Suppleanter

BELGIË / BELGIQUE / BELGIEN

M. Maurice BAYENET

Député wallon

De heer Bart CARON

Vlaams volksvertegenwoordiger

M. Benoît CEREXHE

Ministre du gouvernement de la région de Bruxelles-Capitale

Mme Julie DE GROOTE

Députée de la Communauté française

M. Claude DESAMA

Bourgmestre de Verviers

De heer Eloi GLORIEUX

Vlaams volksvertegenwoordiger

De heer Patrick LACHAERT

Vlaams volksvertegenwoordiger

De heer Stefaan PLATTEAU

Burgemeester van Dilbeek

De heer Jan ROEGIERS

Vlaams volksvertegenwoordiger

De heer Johan SAUWENS

Vlaams volksvertegenwoordiger

De heer Pascal SMET

Minister van de Brusselse Hoofdstedelijke regering

M. René THISSEN

Député de la Communauté française

ČESKÁ REPUBLIKA

pan Petr BENDL

President of the Regional Council of Středočeský kraj

(hejtman Středočeského kraje)

pan Ivan KOSATÍK

President of the Regional Council of Olomoucký kraj

(hejtman Olomouckého kraje)

pan Stanislav JURÁNEK

President of the Regional Council of Jihomoravský kraj

(hejtman Jihomoravského kraje)

pan Rostislav VŠETEČKA

Deputy of the President of the Regional Council of Královéhradecký kraj

(náměstek hejtmana Královéhradeckého kraje)

pan Jiří ŠULC

President of the Regional Council of Ústecký kraj

(hejtman Ústeckého kraje)

pan Petr SKOKAN

President of the Regional Council of Liberecký kraj

(hejtman Libereckého kraje)

pan Petr ZIMMERMANN

President of the Regional Council of Plzeňský kraj

(hejtman Plzeňského kraje)

paní Ivana ČERVINKOVÁ

Mayor of the City of Kostelec nad Orlicí, Královéhradecký kraj

(starostka města Kostelce nad Orlicí, Královéhradecký kraj)

pan Jiří BYTEL

Mayor of the Municipality of Velká Hleďsebe, Karlovarský kraj

(starosta obce Velká Hleďsebe, Karlovarský kraj)

paní Květa HALANOVÁ

Mayor of the City of Jílové u Prahy, Středočeský kraj

(starostka města Jílové u Prahy, Středočeský kraj)

pan Petr OSVALD

Member of the town assembly of the City of Plzeň, Plzeňský kraj

(člen zastupitelstva města Plzně, Plzeňský kraj)

pan Luboš PRŮŠA

Mayor of the City of Písek, Jihočeský kraj

(starosta města Písku, Jihočeský kraj)

DANMARK

Bente NIELSEN

Amtsrådsmedlem

Eva NEJSTGAARD

Borgmester

Jan BOYE

Amtsborgmester

Kristian EBBENSGAARD

Amtsborgmester

Mads LEBECH

Borgmester

Niels LARSEN

Borgmester

Per BØDKER ANDERSEN

Borgmester

Sonny BERTHOLD

Borgmester

Søren ERIKSEN

Viceamtsborgmester

DEUTSCHLAND

Herr Günther H. OETTINGER

Mitglied des Landtages von Baden-Württemberg

Herr Winfried MACK

Mitglied des Landtages von Baden-Württemberg

Frau Emilia MÜLLER

Staatsministerin für Bundes- und Europaangelegenheiten in der Bayerischen Staatskanzlei

Herr Dr. Karl DÖHLER

Mitglied des Landtages des Freistaates Bayern

Frau Martina MICHELS

Mitglied des Abgeordnetenhauses von Berlin

Herr Dieter DOMBROWSKI

Mitglied des Landtages, Brandenburg

Frau Christine WISCHER

Mitglied der Bremischen Bürgerschaft

Frau Dr. Iris SPIESS

Mitglied der Bremischen Bürgerschaft

Herr Stefan KRAXNER

Mitglied des Europaausschusses der Hamburgischen Bürgerschaft

Herr Norbert KARTMANN

Mitglied des Landtages, Hessen

Frau Sylvia BRETSCHNEIDER

Mitglied des Landtages, Mecklenburg-Vorpommern

Frau Ulrike KUHLO

Mitglied des Landtages, Niedersachsen

Herr Christian WULFF

Ministerpräsident des Landes Niedersachsen, Mitglied des Landtages

Herr Michael SCHROEREN

Mitglied des Landtages, Nordrhein-Westfalen

Herr Wolfram KUSCHKE

Mitglied des Landtages, Nordrhein-Westfalen

Frau Nicole MORSBLECH

Mitglied des Landtages, Rheinland-Pfalz

Frau Helma KUHN-THEIS

Mitglied des Landtages des Saarlandes

Herr Prof. Dr. Georg MILBRADT

Ministerpräsident des Freistaates Sachsen, Mitglied des Landtages

Herr Guido KOSMEHL

Mitglied des Landtages, Sachsen-Anhalt

Herr Peter Harry CARSTENSEN

Ministerpräsident des Landes Schleswig-Holstein

Herr Fritz SCHRÖTER

Mitglied des Landtages, Freistaat Thüringen

Herr Clemens LINDEMANN

Landrat des Saarpfalz-Kreises

Herr Günter THUM

Mitglied des Rates der Stadt Rheine

Vorsitzender des Europaausschusses des Dt. Städte- und Gemeindebundes

Frau Dr. h. c. Petra ROTH

Oberbürgermeisterin der Stadt Frankfurt

EESTI

Urve ERIKSON

Chairman of Tudulinna Municipality Council

(Tudulinna Vallavolikogu esimees)

Mihkel JUHKAMI

Chairman of Rakvere Town Council

(Rakvere Linnavolikogu esimees)

Laine JÄNES

Mayor of Tartu

(Tartu linnapea)

Kaido KAASIK

Mayor of Valjala; Valjala Municipality Government

(Valjala vallavanem, Valjala Vallavalitsus)

Aivar KALDJÄRV

Mayor of Võnnu; Võnnu Municipality Government

(Võnnu vallavanem, Võnnu Vallavalitsus)

Jüri RATAS

Mayor of Tallinn

(Tallinna linnapea)

Sirje TOBRELUTS

Mayor of Laheda; Laheda Municipality Government

(Laheda vallavanem, Laheda Vallavalitsus)

ΕΛΛΑΔΑ

Γεώργιος ΜΑΧΕΙΜΑΡΗΣ

Νομάρχης Κέρκυρας

Γιάννης ΜΑΧΑΙΡΙΔΗΣ

Νομάρχης Δωδεκανήσου

Πολύδωρος ΛΑΜΠΡΙΝΟΥΔΗΣ

Νομάρχης Χίου

Λουκάς ΚΑΤΣΑΡΟΣ

Νομάρχης Λάρισας

Ιωάννης ΣΠΑΡΤΣΗΣ

Νομάρχης Ημαθίας

Γιάννης ΚΟΥΡΑΚΗΣ

Δήμαρχος Ηρακλείου-Κρήτης

Γεώργιος ΚΟΥΤΣΟΥΛΗΣ

Δήμαρχος Καλαμάτας

Παναγιώτης ΟΙΚΟΝΟΜΙΔΗΣ

Δήμαρχος Άρτας

Σπύρος ΣΠΥΡΙΔΩΝ

Δήμαρχος Πόρου

Γιώργος ΚΟΤΡΩΝΙΑΣ

Δήμαρχος Λαμιέων

Θεόδωρος ΓΕΩΡΓΑΚΗΣ

Δήμαρχος Ηλιούπολης-Αττικής

Μιλτιάδης ΚΛΑΠΑΣ

Δήμαρχος Πρέβεζας

ESPAÑA

Sr. José María MUÑOA GANUZA

Comisionado para las Relaciones Exteriores de la Comunidad Autónoma del País Vasco

Sra. Anna TERRÓN I CUSÍ

Delegada del Gobierno de la Generalitat de Catalunya en Bruselas

Sr. Santiago GÓMEZ-REINO LECOQ

Secretario General de Relaciones Exteriores de la Xunta de Galicia

Sr. Pedro MOYA MILANÉS

Secretario General de Acción Exterior de la Junta de Andalucía

Sr. Darío DÍAZ ÁLVAREZ

Director General de Relaciones Exteriores y Asuntos Europeos del Principado de Asturias

Sra. Dolores GOROSTIAGA SÁIZ

Vicepresidenta del Gobierno de Cantabria y Consejera de Relaciones Institucionales y Asuntos Europeos

Sr. Emilio DEL RÍO SANZ

Consejero de Presidencia y Acción Exterior del Gobierno de La Rioja

Sra. María Dolores ALARCÓN MARTÍNEZ

Secretaria de Acción Exterior y Relaciones con la Unión Europea de la Comunidad Autónoma de la Región de Murcia

Sra. Gema AMOR PÉREZ

Consejera de Cooperación y Participación de la Generalitat Valenciana

Sr. Mateo SIERRA BARDAJÍ

Director de la Oficina del Gobierno de Aragón en Bruselas

Sra. María Luisa ARAÚJO CHAMORRO

Consejera de Economía y Hacienda de la Junta de Comunidades de Castilla-La Mancha

Sr. Javier MORALES FEBLES

Comisionado de Acción Exterior de la Comunidad Autónoma de Canarias

Sr. Francisco José IRIBARREN FENTANES

Vicepresidente y Consejero de Economía y Hacienda del Gobierno de Navarra

Sr. Ignacio SÁNCHEZ AMOR

Vicepresidente de la Junta de Extremadura

Sr. Manuel JAÉN PALACIOS

Delegado del Gobierno de las Islas Baleares en Bruselas

Sra. Laura DE ESTEBAN MARTÍN

Directora General de Cooperación con el Estado y Asuntos Europeos de la Comunidad de Madrid

Sr. Tomás VILLANUEVA RODRÍGUEZ

Vicepresidente Segundo y Consejero de Economía y Empleo de la Junta de Castilla y León

Sra. Ma Paz FERNÁNDEZ FELGUEROSO

Alcaldesa de Gijón (Asturias)

Sr. Vidal SUÁREZ RODRÍGUEZ

Alcalde de Tegueste (Santa Cruz de Tenerife)

Sra. Rosa AGUILAR RIVERO

Alcaldesa de Córdoba

Sr. Francisco Javier LEÓN DE LA RIVA

Alcalde de Valladolid

FRANCE

M. Jacques AUXIETTE

Président du Conseil régional des Pays-de-la-Loire

M. Jean-Paul BACHY

Président du Conseil régional de Champagne-Ardennes

M. Pierre BERTRAND

Vice-président du Conseil général du Bas-Rhin

M. Philippe BODARD

Maire de Mûrs-Erigné

Mme Martine CALDEROLI-LOTZ

Conseillère régionale d'Alsace

Mme Anne-Marie COMPARINI

Conseillère régionale de Rhône-Alpes

Mme Nassimah DINDAR

Présidente du Conseil général de l'Ile de La Réunion

M. Christian FAVIER

Président du Conseil général du Val-de-Marne

M. Claude GEWERC

Président du Conseil régional de Picardie

M. Pierre HUGON

Vice-président du Conseil général de la Lozère

Mme Carole JORDA-DEDIEU

Adjointe au maire de Bordeaux

M. Antoine KARAM

Président du Conseil régional de Guyane

Mme Mireille LACOMBE

Conseillère générale du Puy-de-Dôme

Mme Claudine LEDOUX

Maire de Charleville-Mézières

M. Martin MALVY

Président du Conseil régional Midi-Pyrénées

M. Denis MERVILLE

Maire de Sainneville

Mme Anne-Marie MONTCHAMP

Conseillère régionale Île-de-France

Mme Elisabeth MORIN

Conseillère régionale de Poitou-Charentes

M. Michel NEUGNOT

Conseiller régional de Bourgogne

M. Christophe ROUILLON

Maire de Coulaines

Mme Gisèle STIEVENARD

Vice-présidente du Conseil général de Paris

M. Jean-Pierre TEISSEIRE

Maire de Cassis

Mme Elisabeth THEVENON-DURANTIN

Conseillère régionale d'Auvergne

M. Michel VAUZELLE

Président du Conseil régional Provence-Alpes-Côte-d'Azur

IRELAND

Councillor Pat DORAN

Member of Wicklow County Council

Councillor Barney STEEL

Member of Longford County Council

Councillor Noreen RYAN

Member of Limerick County Council

Councillor Veronica CAWLEY

Member of Sligo County Council

Councillor Terry BRENNAN

Member of Louth County Council

Councillor Michelle MULHERIN

Member of Mayo County Council

Councillor John PENDER

Member of Carlow County Council

Councillor Peter COYLE

Member of Fingal County Council

Councillor Mary SHEILS

Member of Cork City Council

ITALIA

Sig. Roberto COSOLINI

Assessore della Regione FRIULI VENEZIA GIULIA

Sig. Salvatore CUFFARO

Presidente della Regione SICILIANA

Sig. Vito DE FILIPPO

Presidente della Regione BASILICATA

Sig. Flavio DELBONO

Consigliere regionale/Vicepresidente della Regione EMILIA ROMAGNA

Sig. Franco IACOP

Assessore alla Regione FRIULI VENEZIA GIULIA

Sig. Gianfranco VITAGLIANO

Assessore alla Regione MOLISE

Sig.ra Maria Rita LORENZETTI

Presidente della Regione UMBRIA

Sig. Mario MAGNANI

Consigliere regionale/Presidente del Consiglio Regione TRENTINO ALTO ADIGE

Sig. Alvaro ANCISI

Consigliere comunale di RAVENNA

Sig. Rosario CONDORELLI

Assessore comunale di S. AGATA LI BATTIATI (CT)

Sig. Alessandro PIETRACCI

Consigliere comunale di TRENTO

Sig. Guido RHODIO

Sindaco di SQUILLACE (CZ)

Sig. Savino Antonio SANTARELLA

Sindaco di CANDELA (FG)

Sig. Marco SCALVINI

Sindaco di Bagolino (BS)

Sig.ra Linetta SERRI

Consigliere comunale di ARMUNGIA (CA)

Sig. Raffaele TECCE

Assessore comunale di NAPOLI

Sig. Alberto ZAN

Consigliere comunale di AVIGLIANA (TO)

Sig. Antonino ANGELO

Consigliere provinciale di PALERMO

Sig. Francesco CROCETTO

Consigliere provinciale di POTENZA

Sig. Vincenzo GIULIANO

Consigliere provinciale di POTENZA

Sig. Sebastiano LENTINI

Vicepresidente Provincia di SIRACUSA

Sig. Giovanni MASTROCINQUE

Vicepresidente Provincia di BENEVENTO

Sig. Oreste PASTORELLI

Consigliere provinciale di RIETI

Sig. Massimo ROSSI

Presidente Provincia ASCOLI PICENO

ΚYΠΡΟΣ

Charalampos PITTAS,

Mayor of Morfou

Barbara PERICLEOUS,

Mayor of Ayia Napa

Kyriakos CHATZITTOFIS,

Mayor of Ayios Athanasios

Christakis VIOLARIS,

Mayor of Lakatamia

Dimitris MICHAEL,

President of the Community Council of Ayios Amvrosios

Nikos KALLIS,

President of the Community Council of Zoopigi

LATVIJA

Ms. Nellija KLEINBERGA

Chairman of Skrunda Town with Rural Territory Council

(Skrundas pilsētas ar lauku teritoriju priekšsēdētāja)

Mr. Gunārs LAICĀNS

Chairman of Dundaga Local Municipality

(Dundagas pagasta padomes priekšsēdētājs)

Mr. Aleksandrs LIELMEŽS

Chairman of Mālpils Local Municipality

(Mālpils pagasta padomes priekšsēdētājs)

Mr. Valdis LIEPIŅŠ

Councillor of Rīga City Council

(Rīgas pilsētas domes deputāts)

Ms. Indra RASSA

Chairman of Nīgrande Local Municipality, Chairman of Saldus District Council

(Nīgrandes pagasta padomes priekšsēdētāja, Saldus rajona padomes priekšsēdētāja)

Mr. Andris VAIVODS

Chairman of Līvāni Amalgamated Municipality Council

(Līvānu novada domes priekšsēdētājs)

Mr. Jānis VĪTOLIŅŠ

1st Deputy Chairman of Ventspils City Council

(Ventspils pilsētas domes priekšsēdētāja 1. vietnieks)

LIETUVA

Edmundas ČĖSNA

Raseiniai district municipal council (member)

(Raseinių rajono savivaldybės taryba (narys))

Valdemaras JASEVIČIUS

Šilalė district municipal council (member, mayor)

(Šilalės rajono savivaldybės taryba (narys, meras))

Donatas KAUBRYS

Telšiai district municipal council (member)

(Telšių rajono savivaldybės taryba (narys))

Vytautas RAČKAUSKAS

Visaginas municipal council (member, mayor)

(Visagino savivaldybės taryba (narys, meras))

Alvydas ŠEDŽIUS

Šiauliai County Council of the Development of the Region (chairman)

(Šiaulių apskrities Regiono plėtros taryba (viršininkas))

Zenonas ULKĖ

Šakiai district municipal council (member)

(Šakių rajono savivaldybės taryba (narys))

Kęstutis VAITUKAITIS

Elektrėnai municipal council (member, mayor)

(Elektrėnų savivaldybės taryba (narys, meras))

Povilas ŽAGUNIS

Panevėžys district municipal council (member, mayor)

(Panevėžio rajono savivaldybės taryba (narys, meras))

Liudvikas ŽUKAUSKAS

Skuodas district municipal council (member, mayor)

(Skuodo rajono savivaldybės taryba (narys, meras))

LUXEMBOURG

M. Roby BIWER

Membre du conseil communal de la commune de Bettembourg

M. Fernand ETGEN

Membre du conseil communal de la commune de Feulen

M. Norbert HAUPERT

Membre du conseil communal de la commune de Mondercange

M. Aly MAY

Membre du conseil communal de la commune de Kopstal

Mme Lydia MUTSCH

Membre du conseil communal de la ville d'Esch-sur-Alzette

Mme Martine STEIN-MERGEN

Membre du conseil communal de la ville de Luxembourg

MAGYARORSZÁG

JÓSZAI Attila

member of local government

(a helyi önkormányzat tagja)

MÁTIS András

mayor

(polgármester)

PAIZS József

mayor

(polgármester)

NAGY Sándor

mayor

(polgármester)

CSÉCSEI Béla

mayor

(polgármester)

NAGY Zoltán

member of local government

(a helyi önkormányzat tagja)

Dr. GÉMESI György

mayor

(polgármester)

NÉMETH Balázs

member of local government

(a helyi önkormányzat tagja)

SZABÓ Lóránt

mayor

(polgármester)

LITTER Nándor

mayor

(polgármester)

Dr. SZAKÁCS Imre

member of County Assembly

(a megyei közgyűlés tagja)

KOCSIS Károlyné

member of local government

(a helyi önkormányzat tagja)

MALTA

Mr Joan AGIUS

Deputy Mayor, Zejtun Local Council

Mr Joseph BORG

Councillor, Mellieha Local Council

Mr Paul BUTTIGIEG

Mayor, Qala Local Council

Mr Joseph CORDINA

Councillor, Xaghra Local Council

Dr Malcolm MIFSUD

Mayor, Pietà Local Council

NEDERLAND

De heer (Henk) BLEKER

Gedeputeerde van de provincie Groningen

De heer M.J. (Martin) EURLINGS

Gedeputeerde van de provincie Limburg

De heer W.T. (Wim) van GELDER

Commissaris van de Koningin van de provincie Zeeland

Mevrouw L. (Laetitia) GRIFFITH

Wethouder van de gemeente Amsterdam

Mevrouw P.C. (Pauline) KRIKKE

Burgemeester van de gemeente Arnhem

Mevrouw R. (Riske) KRUISINGA

Gedeputeerde van de provincie Noord-Holland

De heer C.H.J. (Cor) LAMERS

Burgemeester van de gemeente Houten

De heer J. (James) van LIDTH DE JEUDE

Burgemeester van de gemeente Deventer

De heer A.B. (Alexander) SAKKERS

Burgemeester van de gemeente Eindhoven

De heer S.B. (Sipke) SWIERSTRA

Gedeputeerde van de provincie Drenthe

De heer W. (Wim) ZWAAN

Wethouder van de gemeente Meppel

De heer M.F.A. (René) van DIESSEN

Gedeputeerde van de provincie Gelderland

ÖSTERREICH

Herr Ferdinand EBERLE

Landeshauptmann-Stellvertreter von Tirol

Herr Gebhard HALDER

Präsident des Vorarlberger Landtages

Herr Dr. Josef MARTINZ

Landesrat

Frau Mag. Johanna MIKL-LEITNER

Landesrätin

Herr Helmut MÖDLHAMMER

Bürgermeister der Gemeinde Hallwang

Herr Walter PRIOR

Präsident des Burgenländischen Landtages

Herr Dr. Sepp RIEDER

Landeshauptmann-Stellvertreter und amtsf. Stadtrat

Herr Dr. Franz SCHAUSBERGER

Beauftragter des Landes Salzburg für den Ausschuss der Regionen

Herr Mag. Andreas SCHIEDER

Gemeinderat der Stadt Wien

Herr Hermann SCHÜTZENHÖFER

Landeshauptmann-Stellvertreter von Steiermark

Herr Viktor SIGL

Landesrat

Herr Bernd VÖGERLE

Bürgermeister von Gerasdorf bei Wien

POLSKA

Pan Waldemar ACHRAMOWICZ

Marshall of the Kujawsko-Pomorskie voivodship

(Marszałek województwa kujawsko-pomorskiego)

Pan Konstanty DOMBROWICZ

President of the city of Bydgoszcz

(Prezydent miasta Bydgoszczy)

Pan Piotr FOGLER

Chairman of the Sejmik of the Mazowieckie voivodship

(Przewodniczący Sejmiku województwa mazowieckiego)

Pan Jan GRZESIEK

Councillor of the Sejmik of the Wielkopolskie voivodship

(Radny Sejmiku województwa wielkopolskiego)

Pan Michał KARALUS

Starosta of the Pleszew poviat

(Starosta powiatu pleszewskiego)

Pani Marzena KEMPIŃSKA

Starosta of the Świecie poviat

(Starosta powiatu świeckiego)

Pan Zbigniew KRZYWICKI

Chairman of the Sejmik of the Podlaskie voivodship

(Przewodniczący Sejmiku województwa podlaskiego)

Pan Janusz KRZYŻEWSKI

Marshall of the Podlaskie voivodship

(Marszałek województwa podlaskiego)

Pan Grzegorz KUBAT

Marshall of the Opolskie voivodship

(Marszałek województwa opolskiego)

Pan Andrzej KUNT

Mayor of the city of Kostrzyn nad Odra

(Burmistrz miasta Kostrzyna nad Odrą)

Pan Lucjan KUŹNIAR

Councillor of the Sejmik of the Podkarpackie voivodship

(Radny Sejmiku województwa podkarpackiego)

Pan Mirosław LECH

Voit of the municipality of Korycin

(Wójt gminy Korycin)

Pan Marek NAWARA

Vice chairman of the Sejmik of the Małopolskie voivodship

(Wiceprzewodniczący Sejmiku województwa małopolskiego)

Pan Marek OLSZEWSKI

Voit of the municipaility of Lubicz

(Wójt gminy Lubicz)

Pan Wacław OLSZEWSKI

Mayor of the city of Olecko

(Burmistrz miasta Olecka)

Pan Karol OSOWSKI

Chairman of the Sejmik of the Zachodniopomorskie voivodship

(Przewodniczący Sejmiku województwa zachodniopomorskiego)

Pan Andrzej PRUSZKOWSKI

President of the city of Lublin

(Prezydent miasta Lublina)

Pan Jerzy SŁOWIŃSKI

President of the city of Radomsko

(Prezydent miasta Radomska)

Pan Marek TRAMŚ

Starosta of the Polkowice poviat

(Starosta powiatu polkowickiego)

Pan Marek TROMBSKI

Councillor of the Sejmik of the Śląskie voivodship

(Radny Sejmiku województwa śląskiego)

Pan Tadeusz WRONA

President of the city of Częstochowa

(Prezydent miasta Częstochowy)

PORTUGAL

Américo AFONSO PEREIRA

Presidente da Câmara Municipal de Vinhais

Aníbal COELHO COSTA

Presidente da Câmara Municipal de Ferreira do Alentejo

António Manuel LEITÃO BORGES

Presidente da Câmara Municipal de Resende

Carlos Alberto PINTO

Presidente da Câmara Municipal da Covilhã

Jaime MARTA SOARES

Presidente da Câmara Municipal de Vila Nova de Poiares

João CUNHA E SILVA

Vice-Presidente do Governo Regional da Madeira

Joaquim Carlos DIAS VALENTE

Presidente da Câmara Municipal da Guarda

Manuel Joaquim BARATA FREXES

Presidente da Câmara Municipal do Fundão

Paulo RAMALHEIRA TEIXEIRA

Presidente da Câmara Municipal de Castelo de Paiva

Pedro NAMORADO LANCHA

Presidente da Câmara Municipal de Fronteira

Vasco CORDEIRO

Secretário Regional da Presidência da Região Autónoma dos Açores

Vítor Manuel CHAVES DE CARO PROENÇA

Presidente da Câmara Municipal de Santiago do Cacém

SLOVENIJA

gospod Štefan ČELAN

Mayor of the City Municipality of Ptuj

(župan občine Ptuj)

gospod Anton COLARIČ

Local Councillor of the City Municipality of Ljubljana

(svetnik občine Ljubljana)

gospod Siniša GRMOVŠEK

Local Councillor of the Municipality of Bovec

(svetnik občine Bovec)

gospod Anton KOVŠE

Mayor of the Municipality of Podvleka

(župan občine Podvleka)

gospod Branko LEDINEK

Mayor of the Municipality of Rače - Fram

(župan občine Rače - Fram)

gospa Irena MAJCEN

Mayor of the Municipality of Slovenska bistrica

(županja občine Slovenska Bistrica)

gospa Breda ŠKRJANEC

Local Councillor of the Municipality of Grosuplje

(svetnica občine Grosuplje)

SLOVENSKO

pán Remo CICUTTO

Mayor of the City of Piešťany

(primátor mesta Piešťan)

pani Mária DEMETEROVÁ

Member of Regional Parliament of the Bratislava Self-governing Region

(poslankyňa zastupiteľstva Bratislavského samosprávneho kraja)

pani Božena KOVÁČOVÁ

Mayor of Janova Lehota village

(starostka obce Janovej Lehoty)

pán Ján KRÁLIK

Mayor of the City of Banská Bystrica

(primátor mesta Banskej Bystrice)

pani Tatiana MIKUŠOVÁ

Vice-Mayor of the City of Bratislava

(námestníčka primátora mesta Bratislavy)

pán Jozef PETUŠÍK

Mayor of Dolný Lopašov village

(starosta obce Dolného Lopašova)

pán Štefan ŠTEFANEC

President of the Trenčín Self-governing Region

(predseda Trenčianskeho samosprávneho kraja)

pán Peter TOMEČEK

President of the Trnava Self-governing Region

(predseda Trnavského samosprávneho kraja)

pán Ferdinand VÍTEK

Mayor of the City of Nitra

(primátor mesta Nitry)

SUOMI

Markus AALTONEN

Seinäjoen kaupunginvaltuuston jäsen

Minerva KROHN

Uudenmaan liiton maakuntahallituksen jäsen

Markku MARKKULA

Uudenmaan liiton maakuntavaltuuston jäsen

Ossi MARTIKAINEN

Pohjois-Savon liiton maakuntavaltuuston jäsen

Håkan NORDMAN

Vaasan kaupunginvaltuuston puheenjohtaja

Irma PEIPONEN

Varkauden kaupunginvaltuuston puheenjohtaja

Lea SAUKKONEN

Helsingin kaupunginvaltuuston varajäsen

Heini UTUNEN

Jyväskylän kaupunginvaltuuston jäsen

Carina AALTONEN

Lagtingsledamot

Ahvenanmaa/Åland

SVERIGE

Lena CELION,

Ledamot i kommunfullmäktige, Gotlands kommun

Agneta GRANBERG

Kommunalråd, ledamot i kommunstyrelsen, Göteborgs kommun

Bernth JOHNSON

Landstingsråd, ledamot i landstingsstyrelsen, Blekinge läns landsting

Ewa-May KARLSSON

Kommunalråd, ledamot i kommunstyrelsen, Vindelns kommun

Jens NILSSON

Ordförande i kommunstyrelsen, Östersunds kommun

Ulla NORGREN

Landstingsråd, ledamot i landstingsstyrelsen, Västernorrlands landsting

Kent PERSSON

Ordförande i kommunstyrelsen, Norbergs kommun

Lisbeth RYDEFJÄRD,

Landstingsråd

Ledamot i landstingsstyrelsen, Jönköpings läns landsting

Endrick SCHUBERT

Ledamot i kommunfullmäktige, Göteborgs kommun

Catarina SEGERSTEN-LARSSON

Ordförande i landstingsstyrelsen, Värmlands läns landsting

Christina TALLBERG,

Ledamot i landstingsfullmäktige, Stockholms läns landsting

Åsa ÖGREN

Ledamot i kommunstyrelsen, Umeå kommun

UNITED KINGDOM OF GREAT BRITAIN AND NORTHERN IRELAND

Councillor Michael ANGELL (M)

Member of Malvern Hills District Council

Councillor Muriel BARKER CBE (F)

Member of North East Lincolnshire Council

Councillor Robert BRIGHT (M)

Mandate of Newport City Council

Councillor Katrina BULL (F)

Member of Nottingham City Council

Mrs Janet DAVIES AM (F)

Member of National Assembly

Councillor Chris FOOTE-WOOD (M)

Member of Wear Valley District Council

Councillor Graham GARVIE (M)

Member of Scottish Borders Council

Councillor The Lady HANHAM CBE (F)

Member of Royal Borough of Kensington and Chelsea

Councillor Gaby KAGAN (F)

Member of the London Borough of Brent

Councillor Syeda KHATUN OBE (F)

Member of Sandwell Metropolitan Borough Council

Mr Richard LOCHHEAD MSP (M)

Member of Scottish Parliament

Mr George LYON MSP (M)

Member of Scottish Parliament

Councillor Iain MALCOLM (M)

Member of South Tyneside Metropolitan Borough Council

Councillor Mohammad MASOOD (M)

Member of Bradford City Council

Councillor James McCABE (M)

Member of North Lanarkshire Council

Councillor Peter MOORE (M)

Member of Sheffield City Council

Councillor Maurice MORROW (M)

Member of Dungannon and South Tyrone Borough Council

Councillor Robert NEILL AM (M)

Member of London Assembly

Councillor David SHAKESPEARE OBE (M)

Member of Buckinghamshire County Council

Councillor Bernice SWIFT (F)

Member of Fermanagh District Council

Councillor Sharon TAYLOR (F)

Member of Stevenage Borough Council

Councillor Kay TWITCHEN OBE (F)

Member of Essex County Council

Councillor Sir Ron WATSON CBE (M)

Member of Sefton Metropolitan Borough Council

Councillor Milner WHITEMAN OBE (M)

Member of Bridgnorth District Council

		ISSN 1725-2555
Official Journal of the European Union		L 56

English edition	Legislation	Volume 49 25 February 2006

Contents		I Acts whose publication is obligatory	page
	*	Council Regulation (EC) No 300/2006 of 30 January 2006 amending Regulation (EC) No 1255/96 temporarily suspending the autonomous Common Customs Tariff duties on certain industrial, agricultural and fishery products	1

	II Acts whose publication is not obligatory
	Council
*	Council Decision of 24 January 2006 appointing the members and alternate members of the Committee of the Regions for the period from 26 January 2006 to 25 January 2010	75