5.10.2022

Official Journal of the European Union

C 384/3

Notice of initiation of an expiry review of the anti-dumping measures applicable to imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the Federative Republic of Brazil, the Islamic Republic of Iran, the Russian Federation and Ukraine

(2022/C 384/03)

Following the publication of a Notice of impending expiry (1) of the anti-dumping measures in force on the imports certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the Federative Republic of Brazil (‘Brazil’), the Islamic Republic of Iran (‘Iran’), the Russian Federation (‘Russia’) and Ukraine (‘the countries concerned’), the European Commission (‘the Commission’) has received a request for review pursuant to Article 11(2) of Regulation (EU) 2016/1036 of the European Parliament and of the Council of 8 June 2016 on protection against dumped imports from countries not members of the European Union (2) (‘the basic Regulation’).

1. Request for review

The request was submitted on 4 July 2022 by EUROFER, the European Steel Association EUROFER (‘the applicant’) on behalf of the Union industry of certain hot-rolled flat products of iron, non-alloy or other alloy steel in the sense of Article 5(4) of the basic Regulation.

An open version of the request and the analysis of the degree of support by Union producers for the request are available in the file for inspection by interested parties. Section 5.6 of this Notice provides information about access to the file for interested parties.

2. Product under review

The product subject to this review is certain flat-rolled products of iron, non-alloy steel or other alloy steel, whether or not in coils (including ‘cut-to-length’ and ‘narrow strip’ products), not further worked than hot-rolled, not clad, plated or coated (‘HRF’ or ‘product under review’).

The following products are not covered by this review:

(i)	products of stainless steel and grain-oriented silicon electrical steel,

(ii)	products of tool steel and high-speed steel,

(iii)

products, not in coils, without patterns in relief, of a thickness exceeding 10 mm and of a width of 600 mm or more, and

(iv)	products, not in coils, without patterns in relief, of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more.

The product under review is currently falling under CN codes 7208 10 00, 7208 25 00, 7208 26 00, 7208 27 00, 7208 36 00, 7208 37 00, 7208 38 00, 7208 39 00, 7208 40 00, 7208 52 10, 7208 52 99, 7208 53 10, 7208 53 90, 7208 54 00, 7211 13 00, 7211 14 00, 7211 19 00, ex 7225 19 10 (TARIC code 7225191090), 7225 30 90, ex 7225 40 60 (TARIC code 7225406090), 7225 40 90, ex 7226 19 10 (TARIC codes 7226191091, 7226191095), 7226 91 91 and 7226 91 99. These CN and TARIC codes are given for information only, without prejudice to a subsequent change in the tariff classification.

3. Existing measures

The measures currently in force are a definitive anti-dumping duty imposed by Commission Implementing Regulation (EU) 2017/1795 (3).

4. Grounds for the review

The request is based on the grounds that the expiry of the measures would be likely to result in recurrence and continuation of dumping and recurrence of injury to the Union industry.

4.1. Allegation of likelihood of continuation of dumping from Russia, Ukraine and recurrence of dumping from Iran and Brazil

The allegation of likelihood of continuation of dumping for Russia and Ukraine is based on a comparison of domestic price with the export price (at ex-works level) of the product under review when sold for export to the Union.

In view of the current absence of significant import volumes from Iran and Brazil to the Union, the allegation of likelihood of recurrence of dumping for Iran and Brazil is based on a comparison of domestic price with the export price (at ex-works level) of the product under review when sold for export overall and to three major export markets, UAE, Iraq, and Afghanistan for Iran, and Turkey, Chile, and Portugal for Brazil.

On the basis of the above comparisons, which show dumping, the applicant alleges that there is a likelihood of continuation of dumping from Russia and Ukraine and likelihood of recurrence of dumping for Iran and Brazil.

4.2. Allegation of likelihood of recurrence of injury

The applicant alleges the likelihood of recurrence of injury. In this respect the applicant has provided sufficient evidence that, should measures be allowed to lapse, the current import level of the product under review from the countries concerned to the Union is likely to increase at injurious price levels. This is due to the existence of a substantial unused capacities in the countries concerned. This is also due to the attractiveness of the European Union market in terms of size and in terms of prices, since the level of export prices of the product under review from the countries concerned to the Union (in the case of Russia and Ukraine) and to other third country markets undercut the Union industry prices. Moreover, the effects of the post-COVID recovery, which has caused a global supply-demand imbalance for the product concerned, as well as the Russian aggression against Ukraine, have resulted in higher than usual prices and profits, but these effects are expected to subside.

The applicant alleges that the removal of injury has been mainly due to the existence of measures and that an increase of imports at dumped prices from the countries concerned would likely lead to a recurrence of injury to the Union industry should measures be allowed to lapse.

5. Procedure

Having determined, after consulting the Committee established by Article 15(1) of the basic Regulation, that sufficient evidence of a likelihood of dumping and injury exists to justify the initiation of an expiry review, the Commission hereby initiates a review in accordance with Article 11(2) of the basic Regulation.

The expiry review will determine whether the expiry of the measures would be likely to lead to a continuation or recurrence of dumping of the product under review originating in the countries concerned and a continuation or recurrence of injury to the Union industry.

The Commission also draws the attention of the parties to the published Notice (4) on the consequences of the COVID-19 outbreak on anti-dumping and anti-subsidy investigations that may be applicable to this proceeding.

5.1. Review investigation period and period considered

The investigation of a continuation or recurrence of dumping will cover the period from 1 July 2021 to 30 June 2022 (‘the review investigation period’). The examination of trends relevant for the assessment of the likelihood of a continuation or recurrence of injury will cover the period from 1 January 2019 to the end of the investigation period (‘the period considered’).

5.2. Comments on the request and the initiation of the investigation

All interested parties wishing to comment on the request (including matters pertaining to recurrence of injury and causality) or any aspects regarding the initiation of the investigation (including the degree of support for the request) must do so within 37 days of the date of publication of this Notice in the Official Journal of the European Union (5).

Any request for a hearing with regard to the initiation of the investigation must be submitted within 15 days of the date of publication of this Notice.

5.3. Procedure for the determination of a likelihood of continuation or recurrence of dumping

In an expiry review, the Commission examines exports that were made to the Union in the review investigation period and, irrespective of exports to the Union, considers whether the situation of the companies producing and selling the product under review in the countries concerned is such that exports at dumped prices to the Union would be likely to continue or recur if measures expire.

Therefore, all producers (6) of the product under review from the countries concerned, including those that did not cooperate in the investigation leading to the measures in force, are invited to participate in the Commission investigation.

5.3.1. Investigating producers in the countries concerned

In view of the potentially large number of producers in the countries concerned involved in this expiry review and in order to complete the investigation within the statutory time limits, the Commission may limit the producers to be investigated to a reasonable number by selecting a sample (this process is also referred to as ‘sampling’). The sampling will be carried out in accordance with Article 17 of the basic Regulation.

In order to enable the Commission to decide whether sampling is necessary, and if so, to select a sample, all producers, or representatives acting on their behalf, including the ones who did not cooperate in the investigation leading to the measures subject to the present review, are hereby requested to make themselves known and to provide the Commission with information on their companies within 7 days of the date of publication of this Notice. This information must be provided via TRON.tdi at the following address: https://tron.trade.ec.europa.eu/tron/tdi/form/R780_SAMPLING_FORM_FOR_EXPORTING_PRODUCER. Tron access information can be found in sections 5.6 and 5.9 below.

In order to obtain the information it deems necessary for the selection of the sample of producers, the Commission will also contact the authorities of the countries concerned and may contact any known associations of producers in the countries concerned.

If a sample is necessary, the producers will be selected based on the largest representative volume of production, sales or exports which can reasonably be investigated within the time available. All known producers in the countries concerned, the authorities of the countries concerned and associations of producers will be notified by the Commission, via the authorities of the countries concerned if appropriate, of the companies selected to be in the sample.

Once the Commission has received the necessary information to select a sample of producers, it will inform the parties concerned of its decision whether they are included in the sample. The sampled producers will have to submit a completed questionnaire within 30 days from the date of notification of the decision of their inclusion in the sample, unless otherwise specified.

The Commission will add a note to the file for inspection by interested parties reflecting the sample selection. Any comment on the sample selection must be received within 3 days of the date of notification of the sample decision.

A copy of the questionnaire for producers in the countries concerned is available in the file for inspection by interested parties and on DG Trade’s website https://tron.trade.ec.europa.eu/investigations/case-view?caseId=2629.

Without prejudice to the possible application of Article 18 of the basic Regulation, companies that have agreed to their possible inclusion in the sample but are not selected to be in the sample will be considered to be cooperating.

5.3.2. Investigating unrelated importers (7) (8)

Unrelated importers of the product under review from the countries concerned to the Union, including those that did not cooperate in the investigation leading to the measures in force, are invited to participate in this investigation.

In view of the potentially large number of unrelated importers involved in this expiry review and in order to complete the investigation within the statutory time limits, the Commission may limit to a reasonable number the unrelated importers that will be investigated by selecting a sample (this process is also referred to as ‘sampling’). The sampling will be carried out in accordance with Article 17 of the basic Regulation.

In order to enable the Commission to decide whether sampling is necessary and, if so, to select a sample, all unrelated importers, or representatives acting on their behalf, including the ones who did not cooperate in the investigation leading to the measures subject to the present review, are hereby requested to make themselves known to the Commission. These parties must do so within 7 days of the date of publication of this Notice by providing the Commission with the information on their company(ies) requested in Annex to this Notice.

In order to obtain information it deems necessary for the selection of the sample of unrelated importers, the Commission may also contact any known associations of importers.

If a sample is necessary, the importers may be selected based on the largest representative volume of sales of the product under review from the countries concerned in the Union that can reasonably be investigated within the time available. All known unrelated importers and associations of importers will be notified by the Commission of the companies selected to be in the sample.

The Commission will also add a note to the file for inspection by interested parties reflecting the sample selection. Any comment on the sample selection must be received within 3 days of the date of notification of the sample decision.

In order to obtain the information it deems necessary for its investigation, the Commission will make available questionnaires to the sampled unrelated importers. Those parties must submit a completed questionnaire within 30 days from the date of the notification of the sample selection, unless otherwise specified.

A copy of the questionnaire for unrelated importers is available in the file for inspection by interested parties and on DG Trade’s website https://tron.trade.ec.europa.eu/investigations/case-view?caseId=2629.

5.4. Procedure for the determination of a likelihood of a continuation or recurrence of injury and investigating Union producers

In order to establish whether there is a likelihood of a continuation or recurrence of injury to the Union industry, the Commission invites Union producers of the product under review to participate in the investigation.

In view of the large number of Union producers involved in this expiry review and in order to complete the investigation within the statutory time limits, the Commission has decided to limit to a reasonable number the Union producers that will be investigated by selecting a sample (this process is also referred to as ‘sampling’). The sampling is carried out in accordance with Article 17 of the basic Regulation.

The Commission has provisionally selected a sample of Union producers. Details can be found in the file for inspection by interested parties.

Interested parties are hereby invited to comment on the provisional sample. In addition, other Union producers, or representatives acting on their behalf, including Union producers who did not cooperate in the investigation leading to the measures in force, that consider that there are reasons why they should be included in the sample must contact the Commission within 7 days of the date of publication of this Notice. All comments regarding the provisional sample must be received within 7 days of the date of publication of this Notice, unless otherwise specified.

The Commission will notify all known Union producers and/or associations of Union producers of the companies finally selected to be in the sample.

The sampled Union producers will have to submit a completed questionnaire within 30 days from the date of notification of the decision of their inclusion in the sample, unless otherwise specified.

A copy of the questionnaire for Union producers is available in the file for inspection by interested parties and on DG Trade’s website: https://tron.trade.ec.europa.eu/investigations/case-view?caseId=2629.

5.5. Procedure for the assessment of Union interest

Should the likelihood of continuation or recurrence of dumping and injury be confirmed, a decision will be reached, pursuant to Article 21 of the basic Regulation, as to whether maintaining the anti-dumping measures would not be against the Union interest.

Union producers, importers and their representative associations, users and their representative associations, trade unions and representative consumer organisations are invited to provide the Commission with information on the Union interest.

Information concerning the assessment of Union interest must be provided within 37 days of the date of publication of this Notice, unless otherwise specified. This information may be provided either in a free format or by completing a questionnaire prepared by the Commission.

A copy of the questionnaires, including the questionnaire for users of the product under review, is available in the file for inspection by interested parties and on DG Trade’s website https://tron.trade.ec.europa.eu/investigations/case-view?caseId=2629. In any case, information submitted pursuant to Article 21 of the basic Regulation will only be taken into account if supported by factual evidence at the time of submission, which substantiates its validity.

5.6. Interested parties

In order to participate in the investigation, interested parties, such as producers in the countries concerned, Union producers, importers and their representative associations, users and their representative associations, trade unions and representative consumer organisations first have to demonstrate that there is an objective link between their activities and the product under review.

Producers in the countries concerned, Union producers, importers and representative associations who made information available in accordance to the procedures described in sections 5.3.1, 5.3.2 and 5.4.1 will be considered as interested parties if there is an objective link between their activities and the product under review.

Other parties will only be able to participate in the investigation as interested party from the moment they make themselves known, and provided that there is an objective link between their activities and the product under review. Being considered as an interested party is without prejudice to the application of Article 18 of the basic Regulation.

Access to the file available for inspection for interested parties is made via Tron.tdi at the following address: https://tron.trade.ec.europa.eu/tron/TDI. Please follow the instructions on that page to get access (9).

5.7. Other written submissions

Subject to the provisions of this Notice, all interested parties are hereby invited to make their views known, submit information and provide supporting evidence. Unless otherwise specified, this information and supporting evidence must reach the Commission within 37 days of the date of publication of this Notice.

5.8. Possibility to be heard by the Commission investigation services

All interested parties may request to be heard by the Commission investigation services. Any request to be heard must be made in writing and must specify the reasons for the request as well as a summary of what the interested party wishes to discuss during the hearing. The hearing will be limited to the issues set out by the interested parties in writing beforehand.

In principle, hearings will not be used to present factual information which is not yet on file. Nevertheless, in the interest of good administration and to enable Commission services to progress with the investigation, interested parties may be directed to provide new factual information after a hearing.

5.9. Instructions for making written submissions and sending completed questionnaires and correspondence

Information submitted to the Commission for the purpose of trade defence investigations shall be free from copyrights. Interested parties, before submitting to the Commission information and/or data which is subject to third party copyrights, must request specific permission to the copyright holder explicitly allowing the Commission a) to use the information and data for the purpose of this trade defence proceeding; and b) to provide the information and/or data to interested parties to this investigation in a form that allows them to exercise their rights of defence.

All written submissions, including the information requested in this Notice, completed questionnaires and correspondence provided by interested parties for which confidential treatment is requested shall be labelled ‘Sensitive’ (10). Parties submitting information in the course of this investigation are invited to reason their request for confidential treatment.

Parties providing ‘Sensitive’ information are required to furnish non-confidential summaries of it pursuant to Article 19(2) of the basic Regulation, which will be labelled ‘For inspection by interested parties’. These summaries must be sufficiently detailed to permit a reasonable understanding of the substance of the information submitted in confidence. If a party providing confidential information fails to show good cause for a confidential treatment request or does not furnish a non-confidential summary of it in the requested format and quality, the Commission may disregard such information unless it can be satisfactorily demonstrated from appropriate sources that the information is correct.

Interested parties are invited to make all submissions and requests via TRON.tdi (https://tron.trade.ec.europa.eu/tron/TDI) including requests to be registered as interested parties, scanned powers of attorney and certification sheets. By using TRON.tdi or email, interested parties express their agreement with the rules applicable to electronic submissions contained in the document ‘CORRESPONDENCE WITH THE EUROPEAN COMMISSION IN TRADE DEFENCE CASES’ published on the website of the Directorate-General for Trade: https://circabc.europa.eu/ui/group/2e3865ad-3886-4131-92bb-a71754fffec6/library/c8672a13-8b83-4129-b94c-bfd1bf27eaac/details. The interested parties must indicate their name, address, telephone and a valid email address and they should ensure that the provided email address is a functioning official business email which is checked on a daily basis. Once contact details are provided, the Commission will communicate with interested parties by TRON.tdi or email only, unless they explicitly request to receive all documents from the Commission by another means of communication or unless the nature of the document to be sent requires the use of a registered mail. For further rules and information concerning correspondence with the Commission including principles that apply to submissions via TRON.tdi and by email, interested parties should consult the communication instructions with interested parties referred to above.

Commission address for correspondence:

European Commission

Directorate-General for Trade

Directorate G

Office: CHAR 04/039

1049 Bruxelles/Brussel

BELGIQUE/BELGIË

TRON. tdi: https://tron.trade.ec.europa.eu/tron/tdi

Email:

Federative Republic of Brazil	:	TRADE-R780-HRF-DUMPING-Brazil@ec.europa.eu
Islamic Republic of Iran	:	TRADE-R780-HRF-DUMPING-Iran@ec.europa.eu
Russian Federation	:	TRADE-R780-HRF-DUMPING-Russia@ec.europa.eu
Ukraine	:	TRADE-R780-HRF-DUMPING-Ukraine@ec.europa.eu
Injury and Union interest	:	TRADE-R780-HRF-INJURY@ec.europa.eu

6. Schedule of the investigation

The investigation shall normally be concluded within 12 months and in any event no later than 15 months from the date of the publication of this Notice, pursuant to Article 11(5) of the basic Regulation.

7. Submission of information

As a rule, interested parties may only submit information in the timeframes specified in section 5 of this Notice.

In order to complete the investigation within the mandatory deadlines, the Commission will not accept submissions from interested parties after the deadline to provide comments on the final disclosure or, if applicable, after the deadline to provide comments on the additional final disclosure.

8. Possibility to comment on other parties’ submissions

In order to guarantee the rights of defence, interested parties should have the possibility to comment on information submitted by other interested parties. When doing so, interested parties may only address issues raised in the other interested parties’ submissions and may not raise new issues.

Comments on the information provided by other interested parties in reaction to the disclosure of the definitive findings should be submitted within 5 days from the deadline to comment on the definitive findings, unless otherwise specified. If there is an additional final disclosure, comments on the information provided by other interested parties in reaction to this further disclosure should be made within 1 day from the deadline to comment on this further disclosure, unless otherwise specified.

The outlined timeframe is without prejudice to the Commission’s right to request additional information from interested parties in duly justified cases.

9. Extension to time limits specified in this Notice

Extensions to time limits provided for in this Notice may be granted upon request of interested parties showing due cause.

Any extension to the time limits provided for in this Notice should only be requested in exceptional circumstances and will only be granted if duly justified. In any event, any extensions to the deadline to reply to questionnaires will be limited normally to 3 days, and as a rule will not exceed 7 days. Regarding time limits for the submission of other information specified in the Notice of initiation, extensions will be limited to 3 days unless exceptional circumstances are demonstrated.

10. Non-cooperation

In cases where any interested party refuses access to or does not provide the necessary information within the time limits, or significantly impedes the investigation, findings, affirmative or negative, may be made on the basis of facts available, in accordance with Article 18 of the basic Regulation.

Where it is found that any interested party has supplied false or misleading information, the information may be disregarded and use may be made of facts available.

If an interested party does not cooperate or cooperates only partially and findings are therefore based on facts available in accordance with Article 18 of the basic Regulation, the result may be less favourable to that party than if it had cooperated.

Failure to give a computerised response shall not be deemed to constitute non-cooperation, provided that the interested party shows that presenting the response as requested would result in an unreasonable extra burden or unreasonable additional cost. The interested party should immediately contact the Commission.

11. Hearing Officer

Interested parties may request the intervention of the Hearing Officer in trade proceedings. The Hearing Officer reviews requests for access to the file, disputes regarding the confidentiality of documents, requests for extension of time limits and any other request concerning the rights of defence of interested parties and third parties as may arise during the proceeding.

The Hearing Officer may organise hearings and mediate between the interested party/-ies and Commissions services to ensure that the interested parties’ rights of defence are being fully exercised. A request for a hearing with the Hearing Officer should be made in writing and should specify the reasons for the request. The Hearing Officer will examine the reasons for the requests. These hearings should only take place if the issues have not been settled with the Commission services in due course.

Any request must be submitted in good time and expeditiously so as not to jeopardise the orderly conduct of proceedings. To that effect, interested parties should request the intervention of the Hearing Officer at the earliest possible time following the occurrence of the event justifying such intervention. Where hearing requests are submitted outside the relevant timeframes, the Hearing Officer will also examine the reasons for such late requests, the nature of the issues raised and the impact of those issues on the rights of defence, having due regard to the interests of good administration and the timely completion of the investigation.

For further information and contact details interested parties may consult the Hearing Officer’s web pages on DG Trade’s website: http://ec.europa.eu/trade/trade-policy-and-you/contacts/hearing-officer/.

12. Possibility to request a review under Article 11(3) of the basic Regulation

As this expiry review is initiated in accordance with the provisions of Article 11(2) of the basic Regulation, the findings thereof will not lead to the existing measures being amended but will lead to those measures being repealed or maintained in accordance with Article 11(6) of the basic Regulation.

If any interested party considers that a review of the measures is warranted so as to allow for the possibility to amend the measures, that party may request a review pursuant to Article 11(3) of the basic Regulation.

Parties wishing to request such a review, which would be carried out independently of the expiry review mentioned in this Notice, may contact the Commission at the address given above.

13. Processing of personal data

Any personal data collected in this investigation will be treated in accordance with Regulation (EU) 2018/1725 of the European Parliament and of the Council (11).

A data protection notice that informs all individuals of the processing of personal data in the framework of Commission’s trade defence activities is available on DG Trade’s website: http://ec.europa.eu/trade/policy/accessing-markets/trade-defence/

(1) OJ C 277, 12.7.2021, p. 3.

(2) OJ L 176, 30.6.2016, p. 21.

(3) Commission Implementing Regulation (EU) 2017/1795 of 5 October 2017 imposing a definitive anti-dumping duty on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in Brazil, Iran, Russia and Ukraine and terminating the investigation on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in Serbia (OJ L 258, 6.10.2017, p. 24).

(4) https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX%3A52020XC0316%2802%29

(5) All references to the publication of this Notice will be references to publication of this Notice in the Official Journal of the European Union, unless otherwise specified.

(6) A producer is any company in the countries concerned which produces the product under review, including any of its related companies involved in the production, domestic sales or exports of the product under review.

(7) Only importers not related to producers in the country(ies) concerned can be sampled. Importers that are related to producers have to fill in Annex I to the questionnaire for these producers. In accordance with Article 127 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code, two persons shall be deemed to be related if: (a) they are officers or directors of the other person’s business; (b) they are legally recognised partners in business; (c) they are employer and employee; (d) a third party directly or indirectly owns, controls or holds 5 % or more of the outstanding voting stock or shares of both of them; (e) one of them directly or indirectly controls the other; (f) both of them are directly or indirectly controlled by a third person; (g) together they control a third person directly or indirectly; or (h) they are members of the same family (OJ L 343, 29.12.2015, p. 558). Persons shall be deemed to be members of the same family only if they stand in any of the following relationships to one another: (i) husband and wife, (ii) parent and child, (iii) brother and sister (whether by whole or half blood), (iv) grandparent and grandchild, (v) uncle or aunt and nephew or niece, (vi) parent-in-law and son-in-law or daughter-in-law, (vii) brother-in-law and sister-in-law. In accordance with Article 5(4) of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code, ‘person’ means a natural person, a legal person, and any association of persons which is not a legal person but which is recognised under Union or national law as having the capacity to perform legal acts (OJ L 269, 10.10.2013, p. 1).

(8) The data provided by unrelated importers may also be used in relation to aspects of this investigation other than the determination of dumping.

(9) In case of technical problems please contact the Trade Service Desk by email trade-service-desk@ec.europa.eu or by telephone +32 22979797.

(10) A ‘Sensitive’ document is a document which is considered confidential pursuant to Article 19 of the basic Regulation and Article 6 of the WTO Agreement on Implementation of Article VI of the GATT 1994 (Anti-Dumping Agreement). It is also a document protected pursuant to Article 4 of Regulation (EC) No 1049/2001 of the European Parliament and of the Council (OJ L 145, 31.5.2001, p. 43).

(11) Regulation (EU) 2018/1725 of the European Parliament and of the Council of 23 October 2018 on the protection of natural persons with regard to the processing of personal data by the Union institutions, bodies, offices and agencies and on the free movement of such data, and repealing Regulation (EC) No 45/2001 and Decision No 1247/2002/EC (OJ L 295, 21.11.2018, p. 39).

ANNEX

☐	‘Sensitive’ version
☐	Version ‘For inspection by’ interested parties’
(tick the appropriate box)

EXPIRY REVIEW OF THE ANTI-DUMPING MEASURES APPLICABLE TO IMPORTS OF CERTAIN HOT-ROLLED FLAT PRODUCTS OF IRON, NON-ALLOY OR OTHER ALLOY STEEL ORIGINATING IN THE FEDERATIVE REPUBLIC OF BRAZIL, THE ISLAMIC REPUBLIC OF IRAN, THE RUSSIAN FEDERATION AND UKRAINE

INFORMATION FOR THE SELECTION OF THE SAMPLE OF UNRELATED IMPORTERS

This form is designed to assist unrelated importers in responding to the request for sampling information made in point 5.3.2 of the Notice of initiation.

Both the ‘Sensitive’ version and the version ‘For inspection by interested parties’ should be returned to the Commission as set out in the notice of initiation.

1. IDENTITY AND CONTACT DETAILS

Supply the following details about your company:

Company name
Address
Contact person
Email address
Telephone number

2. TURNOVER AND SALES VOLUME

Indicate the total turnover in euros (EUR) of the company, the value in euros (EUR) and volume in tonnes for imports and resales on the Union market after importation from Iran, Ukraine, Russia and Brazil, during the review investigation period, of the product under review as defined in the Notice of initiation.

	Volume in tonnes	Value in euros (EUR)
Total turnover of your company in euros (EUR)
Imports of the product under review originating in Iran
Imports of the product under review originating in Ukraine
Imports of the product under review originating in Russia
Imports of the product under review originating in Brazil
Imports of the product under review (all origins)
Resales on the Union market after importation from Iran of the product under review
Resales on the Union market after importation from Ukraine of the product under review
Resales on the Union market after importation from Russia of the product under review
Resales on the Union market after importation from Brazil of the product under review

3. ACTIVITIES OF YOUR COMPANY AND RELATED COMPANIES (1)

Give details of the precise activities of the company and all related companies (please list them and state the relationship to your company) involved in the production and/or selling (export and/or domestic) of the product under review. Such activities could include but are not limited to purchasing the product under review, producing it under sub-contracting arrangements, or processing or trading it.

Company name and location	Activities	Relationship

4. OTHER INFORMATION

Please provide any other relevant information which the company considers useful to assist the Commission in the selection of the sample.

5. CERTIFICATION

By providing the above information, the company agrees to its possible inclusion in the sample. If the company is selected to be part of the sample, this will involve completing a questionnaire and accepting a visit at its premises in order to verify its response. If the company indicates that it does not agree to its possible inclusion in the sample, it will be deemed not to have cooperated in the investigation. The Commission’s findings for non-cooperating importers are based on the facts available and the result may be less favourable to that company than if it had cooperated.

Signature of authorised official:

Name and title of authorised official:

Date:

(1) In accordance with Article 127 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code, two persons shall be deemed to be related if: (a) they are officers or directors of the other person’s business; (b) they are legally recognised partners in business; (c) they are employer and employee; (d) a third party directly or indirectly owns, controls or holds 5 % or more of the outstanding voting stock or shares of both of them; (e) one of them directly or indirectly controls the other; (f) both of them are directly or indirectly controlled by a third person; (g) together they control a third person directly or indirectly; or (h) they are members of the same family (OJ L 343, 29.12.2015, p. 558). Persons shall be deemed to be members of the same family only if they stand in any of the following relationships to one another: (i) husband and wife, (ii) parent and child, (iii) brother and sister (whether by whole or half blood), (iv) grandparent and grandchild, (v) uncle or aunt and nephew or niece, (vi) parent-in-law and son-in-law or daughter-in-law, (vii) brother-in-law and sister-in-law. In accordance with Article 5(4) of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code, ‘person’ means a natural person, a legal person, and any association of persons which is not a legal person but which is recognised under Union or national law as having the capacity to perform legal acts (OJ L 269, 10.10.2013, p. 1).

5.10.2022

Official Journal of the European Union

C 384/14

Publication of a communication of approval of a standard amendment to the product specification for a name in the wine sector referred to in Article 17(2) and (3) of Commission Delegated Regulation (EU) 2019/33

(2022/C 384/04)

This communication is published in accordance with Article 17(5) of Commission Delegated Regulation (EU) 2019/33 (1).

COMMUNICATING THE APPROVAL OF A STANDARD AMENDMENT

‘Alsace grand cru Furstentum’

PDO-FR-A0378-AM02

Date of communication: 20 July 2022

DESCRIPTION OF AND REASONS FOR THE APPROVED AMENDMENT

1. Additional indication

In Chapter I, Section II(1), of the specification, the following common forms of the names of grape varieties have been added: ‘Sylvaner’ and ‘Pinot Noir’, with the corresponding official names, respectively: Sylvaner B and Pinot Noir N.

The common form ‘Sylvaner’ has been added to correct an oversight in the original version of the specification. The original version stated in Chapter I, Section X(1)(b), that the authorised varieties ‘can be made into wine and placed on the market under their respective common names’. However, the corresponding common form of the name was not included in the list of permitted common names. Prior to the approval of the original version of the specification, a national decision meant that Sylvaner B had been added to the varieties authorised for the production of wines with the designation of origin ‘Alsace grand cru Zotzenberg’. This took into account local custom and the reputation of these wines.

The common name ‘Pinot Noir’ has been added to the specification. This is because of an application submitted at national level for recognition of the still red wines of certain ‘Alsace grand cru’ designations of origin. This application for the recognition of a red wine is based on long-standing practice, reputation and the characteristics of the wines produced with grapes of the variety Pinot Noir N grown on demarcated parcels of these ‘Alsace grand cru’ designations. Pinot Noir N is the only variety authorised for these red wines.

Chapter I, Section II(1), of the specification concerns the varieties of Muscat à petits grains, commonly referred to as ‘Muscat’. The words ‘blancs’ and ‘roses’ have been added to the names of these varieties, in order to correct an oversight in the previous version of the specification.

These amendments do not require any amendments to the single document.

2. Types of product

In Chapter I, Section III, of the specification, the text has been amended to show that the protected designations of origin covered by the current specification no longer refer exclusively to still white wines.

The ‘Alsace grand cru’ protected designations of origin which cover red and white still wines are mentioned by name: ‘Alsace grand cru Hengst’ and ‘Alsace grand cru Kirchberg de Barr’.

This amendment does not affect the single document.

3. Geographical area

In Chapter I, Section IV(1), of the specification, a paragraph has been added giving the dates on which the geographical area was approved by the relevant INAO (National Institute for Origin and Quality) committee. The new paragraph also refers to the 2021 Official Geographic Code as the source for the demarcation of the area boundary as it appears in the specification. Reference to the source gives legal certainty to the demarcation of the area.

As a result of the reference to the 2021 Official Geographic Code, the list of names of municipalities has been updated. The municipalities of Kientzheim and Sigolsheim have been abolished. Their territory is now part of the municipality of Kaysersberg Vignoble.

These editorial changes do not affect the boundary of the geographical area.

The following sentences have also been added to Section IV(1):

‘Maps of the geographical area can be accessed on the INAO website.

A map defining the boundaries of the geographical area has been lodged with the municipal authorities in the case of the partially included municipality.’

These amendments require the amendment of point 6 of the single document.

4. Demarcated parcel area

In Chapter I, Section IV(2), of the specification:

—	in order to correct an oversight, the words ‘6 and 7 September 2006’ have been added to the first paragraph. This is a date on which the parcel area was approved by the relevant national committee;

—	in the second paragraph, the wording has been amended to take into account the changes made to the names of municipalities in Section IV(1);

—	the ‘Municipalities’ column in the table has been updated to correspond to the names of municipalities mentioned in Section IV(1).

These amendments do not affect the single document.

5. Area in immediate proximity

In Chapter I, Section IV(3), of the specification, a paragraph has been amended to give the 2021 Official Geographic Code as the source for the demarcation of the area boundary as it appears in the specification. Reference to the source gives legal certainty to the demarcation of the area.

As a result of the reference to the 2021 Official Geographic Code, the list of names of municipalities has been updated. The name of the municipality of Kaysersberg has been deleted and that of Kaysersberg Vignoble added, together with the information that the only part of this municipality included is that belonging to the delegated municipality of Kaysersberg.

These editorial changes do not affect the boundary of the area in immediate proximity.

These amendments require the amendment of point 9 of the single document.

6. Vine varieties

In Chapter I, Section V(1)(a), of the specification, two phrases have been added: ‘— for white wines:’ and ‘— for red wines: from grape variety Pinot Noir N’. This is because an application for recognition of the still red wines was submitted at national level for certain ‘Alsace grand cru’ designations of origin. Pinot Noir N is the only variety authorised for these red wines. It is also the only variety authorised for the production of red wine in the ‘Alsace’ designation of origin.

In Sections V(1)(a), (b) and (e) and V(2)(b), the words ‘blancs’ and ‘roses’ have been added to the names of the different varieties of Muscat à petits grains. This corrects an oversight in the previous version of the specification.

The single document has not been changed on account of these amendments.

7. Planting density

In Chapter I, Section VI(1)(a), of the specification, the following phrases have been added: ‘For white wine production’ and ‘For red wine production’. This is to distinguish between the minimum planting densities according to the colour of the wines. These densities are stated for the designations authorised to produce red wines.

The single document has not been changed on account of these additions.

In Chapter I, Section VI(1)(a), of the specification, the date of ‘25 October 2011’ has been specified for the effective application of the rule regarding the possibility of the density changing due to grubbing-up. It replaces the wording ‘on the date on which this specification was approved’.

This amendment requires the amendment of point 5 of the single document.

8. Pruning rule

In Chapter I, Section VI(1)(b), of the specification, the previous rule for white wines regarding the number of buds per square metre of soil differed according to the grape varieties. This rule has been abolished and replaced by a single rule of 18 buds per plant.

This development makes it possible to harmonise the wording in the specifications of the Alsace designations of origin, and to simplify the methods of checking.

Point 5 of the single document has been amended.

The words ‘For white wines’ have been added at the start of the sentence. This is due to the application for recognition for still red wines submitted at national level for some ‘Alsace grand cru’ designations of origin.

A pruning rule has been added for red wines, setting the maximum number of buds per plant at 14. This is less than the number authorised for white wine production. This rule makes it possible to comply with the rules on yields and to produce good-quality grapes.

The above amendments do not affect the single document.

9. Rules on trellising and foliage height

In Chapter I, Section VI(1)(c), of the specification, the maximum height of the wires supporting the arched canes has been deleted, and the method of measuring the height of trellised foliage has been changed.

These amendments make it possible to verify that the foliage height is compliant as the plants grow. Previously this was possible only through a requirement relating to the support.

This amendment does not affect the single document.

10. Average maximum crop load per parcel

In Chapter I, Section VI(1)(d), of the specification, the average maximum crop load per parcel for white wines has been reduced from 10 000 to 8 500 kilograms per hectare, reflecting the reduced yields for these wines.

An average maximum crop load per parcel has been established for red wines. It is less than that for white wine, reflecting the yields for red wines.

These amendments do not affect the single document.

11. Ripeness of grapes and minimum natural alcoholic strength by volume

In Chapter I, Section VII(2)(a), of the specification, the table has been amended. It now takes into account the application for recognition of still red wines submitted at national level for some ‘Alsace grand cru’ designations of origin.

For these ‘Alsace grand cru’ designations for red wines, minimum levels have been established for the sugar content of the different grape varieties when harvested, and for their minimum natural alcoholic strength by volume.

These amendments do not affect the single document.

For white wines, the minimum levels for the sugar content of the grapes have been increased by 2 or 3 grams per litre of must in order to respect the same 1 % variation with the minimum natural alcoholic strength by volume for each grape variety, as in the previous version of the specification. The protection and management body has chosen to calculate the transformation of grams of sugar into alcohol on the basis of 17 grams of sugar producing 1 % alcohol by volume for white wines. The original version of the specification had used the figure of 16,83 grams. The amount of 17 grams had been recommended by the competent national committee of the INAO when the original version of the specifications was established.

These amendments do not affect the single document.

12. Yields

In Chapter I, Section VIII(1) and (2), of the specification, the yields and upper yield limits have been reduced for white wines and white wines labelled ‘Vendanges Tardives’ [Late Harvest], in accordance with the hierarchy of designations in the Alsace region. This amendment will allow better quality control.

Point 5 of the single document has been amended for the maximum yields (upper yield limits).

The words ‘Vins blancs’ have been added for wines without a description. This is due to an application submitted at national level for recognition of still red wines for some ‘Alsace grand cru’ designations of origin.

The yield and upper yield limit for red wines have been established in accordance with the hierarchy of designations of the Alsace regions, meaning that the amounts are lower for these ‘grand cru’ designations.

The latter amendments do not affect the single document.

13. Malolactic fermentation, fermentable sugar content for red wines

Chapter I, Section IX(1)(c), of the specification lays down that malolactic fermentation is carried out for red wines.

For the purpose of checking compliance with this rule, the maximum malic acid content has been established as 0,4 grams per litre at the time of packaging.

Section IX(1)(d) lays down a maximum content for fermentable sugars (glucose and fructose) of 2 grams per litre after fermentation.

The single document has not been amended.

14. Increasing the minimum natural alcoholic strength by volume prohibited for red wines

Chapter I, Section IX(1)(e), of the specification lays down that red wines must not be enriched in any way. This restriction applies to the production process. It is consistent with demarcation of parcels for grape-growing, minimum planting density, pruning rules and restricted yields.

The single document has not been amended.

15. Capacity of the winery

In Chapter I, Section IX(1)(g), of the specification, the coefficient for calculating the capacity of the winery has been reduced.

The capacity of the winery does not need to be as large in proportion to the volume of the preceding harvest.

This amendment does not affect the single document.

16. Date of maturing and placing on the market for consumers in the case of red wines

In Chapter I, Section IX(2), of the specification, a minimum maturation period has been established for red wines: until 1 October of the year following the harvest. Wines made with grapes of the variety Pinot Noir N from these vineyards need a minimum period in order to fully express their characteristics.

In Chapter I, Section IX(5)(a), it is stated that, following the maturation period, red wines cannot be placed on the market for consumers until 1 October of the year following the harvest.

These amendments do not require any amendments to the single document.

17. Checks on packaged batches

In Chapter I, Section IX(3)(b), of the specification, the rule has been abolished that required sample bottles to be kept for checks on packaged batches.

This rule is a measure of verifiability. It is now part of the checking plan.

The single document is not affected by this amendment.

18. Storing packaged wines

In Chapter I, Section IX(4), of the specification, further details have been provided of the characteristics of the place where packaged wines are stored.

This helps operators to comply with this rule, and makes checking easier.

This amendment does not affect the single document.

19. Human factors contributing to the link with the geographical area

In Chapter I, Section X(1)(b), of the specification, the text has been amended to take account of the fact that still red wines have been approved for the designations of origin ‘Alsace grand cru Hengst’ and ‘Alsace grand cru Kirchberg de Barr’.

—

The following information has been added for the protected designation of origin ‘Alsace grand cru Hengst’: red wines approved in 2022; Pinot Noir N is the only variety authorised; the minimum planting density is 5 500 plants per hectare for the production of red wine; enrichment is not permitted in any form; there must be a minimum maturing period of 10 months.

—

The following information has been added for the protected designation of origin ‘Alsace grand cru Kirchberg de Barr’: red wines approved in 2022; Pinot Noir N is the only variety authorised; the minimum planting density is 5 000 plants per hectare for the production of red wine; enrichment is not permitted in any form; there must be a minimum maturing period of 10 months.

In Section X(1)(b), information to the effect that these two designations of origin were recognised for white wines has been deleted. The words ‘for white wines’ have been added where necessary for understanding the text.

The single document has not been changed on account of these amendments.

The words ‘blancs’ and ‘roses’ have been added to the names of the different varieties of Muscat à petits grains. This corrects an oversight in the previous version of the specification. These additions do not affect the single document.

20. Description of the wine(s)

In Chapter I, Section X(2), of the specification, details have been added of the visual appearance of the white wines in order to characterise them more fully.

In the case of the first two types of wine described: ‘The colour of these two types of wine is deep and intense and ranges to golden yellow.’

Details of the last two types of wine: ‘The colour of these two types of wine is deep and intense and ranges to amber yellow.’

Point 4 of the single document has been amended.

A description of the main organoleptic characteristics of the red wines has been added for the designations of origin ‘Alsace grand cru Hengst’ and ‘Alsace grand cru Kirchberg de Barr’.

These descriptions do not affect the single document.

21. Link with the geographical area

In Chapter I, Section X(3), of the specification, for the designation of origin ‘Alsace grand cru Hengst’, there are details about the link between the geographical origin and the characteristics of the wines which could also apply to the red wines of this designation. These details have been supplemented by information specific to the red wines.

The single document has not been amended.

22. Transitional measures

In Chapter I, Section XI(2), of the specification, in accordance with the amendments to Chapter I, Section VI, the maximum height of the wires supporting the arched canes has been deleted and the maximum number of buds per plant has been reduced.

This amendment does not affect the single document.

23. Requirement to state the sugar content on labelling and other formats giving information for white wines

Under the previous specification, mention of the sugar content was optional. Chapter I, Section XII(2)(d), of the specification has been replaced by a new text making it obligatory to mention the sugar content as laid down in Regulation (EU) 2019/33.

This information makes it easier for consumers to understand the type of wine.

The new rule does not apply to wines bearing the traditional terms ‘Vendanges Tardives’ and ‘Sélection de Grains Nobles’ [includes botrytised grapes].

Point 9 of the single document has been supplemented.

The original point (d) of Section XII(2) is now point (e).

This amendment does not affect the single document.

24. Advance declaration of the assignment of parcels

In Chapter II, Section I(1), of the specification, a clarification has been added to the rules regarding the advance declaration of the assignment of parcels. Such declarations are submitted by operators to the protection and management body for the ‘Alsace grand cru’ designations of origin when they cease production under the designation.

This amendment does not affect the single document.

SINGLE DOCUMENT

1. Name(s)

Alsace grand cru Furstentum

2. Geographical indication type

PDO – Protected designation of origin

3. Categories of grapevine products

Wine

4. Description of the wine(s)

BRIEF WRITTEN DESCRIPTION

The wines are still and white.

The minimum natural alcoholic strength by volume of the wines is 12,5 % for Gewürztraminer Rs and Pinot Gris G, and 11 % for other varieties. After enrichment, the total alcoholic strength by volume of the wines does not exceed 15 % for wines made from the varieties Gewürztraminer B and Pinot Gris G, and 14 % for wines made from other varieties.

The other analytical characteristics are as laid down by EU legislation.

Excellent examples of white wines suitable for ageing, they are characterised by powerful freshness underpinned by dominant tartaric acid combined with beautifully ripened grapes. The name of the designation may be supplemented by the common names of the grape varieties, on condition that the wines are made exclusively from grape varieties that can be referred to using the names in question. These are wines of great substance and complexity, with powerful aromas and numerous subtleties. Very long in the mouth, they become more complex over time.

There are two types: — dry wines with minerality; — aromatic wines that are fruity, unctuous and rich. The colour of these two types of wine is deep and intense and ranges to golden yellow.

General analytical characteristics
Maximum total alcoholic strength (in % volume)
Minimum actual alcoholic strength (in % volume)
Minimum total acidity	in milliequivalents per litre
Maximum volatile acidity (in milliequivalents per litre)
Maximum total sulphur dioxide (in milligrams per litre)

2. Designation followed by the words ‘Vendanges Tardives’

BRIEF WRITTEN DESCRIPTION

The minimum natural alcoholic strength by volume of the wines is 16 % for Gewürztraminer Rs and Pinot Gris G, and 14,5 % for the other varieties.

The other analytical characteristics are as laid down by EU legislation.

Wines with the description ‘Vendanges Tardives’ often have very exotic aromas, of candied fruits with a fresh finish. They are remarkably concentrated with long-lasting aromas. The colour of these wines is deep and intense and ranges to amber yellow.

General analytical characteristics
Maximum total alcoholic strength (in % volume)
Minimum actual alcoholic strength (in % volume)
Minimum total acidity	in milliequivalents per litre
Maximum volatile acidity (in milliequivalents per litre)
Maximum total sulphur dioxide (in milligrams per litre)

3. Designation followed by the words ‘Sélection de Grains Nobles’

BRIEF WRITTEN DESCRIPTION

The minimum natural alcoholic strength by volume of the wines is 18,2 % for Gewürztraminer Rs and Pinot Gris G, and 16,4 % for other varieties.

The other analytical characteristics are as laid down by EU legislation.

Wines entitled to be labelled ‘Sélection de Grains Nobles’ are more concentrated, powerful wines, often with aromas of candied fruits. They are remarkably concentrated with long-lasting aromas. The colour of these wines is deep and intense and ranges to amber yellow.

General analytical characteristics
Maximum total alcoholic strength (in % volume)
Minimum actual alcoholic strength (in % volume)
Minimum total acidity	in milliequivalents per litre
Maximum volatile acidity (in milliequivalents per litre)
Maximum total sulphur dioxide (in milligrams per litre)

5. Wine-making practices

5.1. Specific oenological practices

1. Training systems: planting density

Cultivation method

The minimum vine planting density is 4 500 plants per hectare.

The distance between the rows of vines must not exceed 2 metres.

Vines have an in-the-row spacing of no less than 0,75 metres and no more than 1,50 metres.

As of 25 October 2011, grubbing-up of rows within a parcel must not result in spacing wider than 3 metres between the rows.

2. Training systems: pruning rule

Cultivation method

The vines are pruned to single or double Guyot with a maximum of 18 buds per plant.

3. Harvest

Cultivation method

The wines are made from grapes harvested manually.

4. Increase in the minimum natural alcoholic strength by volume

Specific oenological practice

Any increase in the minimum natural alcoholic strength by volume must not exceed:

0,5 % for wines made from the varieties Gewürztraminer B and Pinot Gris G,

1,5 % for wines made from other varieties.

Wines eligible for the term ‘Vendanges Tardives’ or ‘Sélection de Grains Nobles’ must not be enriched.

5. Production

Wine-making restriction

Use of wood chips is prohibited.

6. Maturing the wines

Specific oenological practice

The wines must be matured until at least 1 June of the year following the harvest.

Wines eligible for the term ‘Vendanges Tardives’ or ‘Sélection de Grains Nobles’ must be matured until at least 1 June of the second year following the harvest.

5.2. Maximum yields

1.	Designation with or without the additional term ‘Vendanges Tardives’ 60 hectolitres per hectare

2.	Designation followed by the words ‘Sélection de Grains Nobles’ 48 hectolitres per hectare

6. Demarcated geographical area

The grapes are harvested and the wines are produced, developed and matured in the following municipalities, based on the 2021 Official Geographic Code:

—

Department of Haut-Rhin: Entire municipalities: Ammerschwihr, Beblenheim, Bennwihr, Bergheim, Bergholtz, Eguisheim, Gueberschwihr, Guebwiller, Hattstatt, Hunawihr, Ingersheim, Katzenthal, Mittelwihr, Niedermorschwihr, Orschwihr, Pfaffenheim, Ribeauvillé, Riquewihr, Rodern, Rouffach, Saint-Hippolyte, Soultzmatt, Thann, Turckheim, Vieux-Thann, Voegtlinshoffen, Westhalten, Wettolsheim, Wintzenheim, Wuenheim and Zellenberg.

Municipalities partially included: Kaysersberg Vignoble, only the territory of the delegated municipalities of Kientzheim and Sigolsheim.

—

Department of Bas-Rhin: Andlau, Barr, Bergbieten, Blienschwiller, Dahlenheim, Dambach-la-Ville, Eichhoffen, Kintzheim, Marlenheim, Mittelbergheim, Molsheim, Nothalten, Scharrachbergheim-Irmstett and Wolxheim.

A map defining the boundaries of the geographical area has been lodged with the municipal authorities of the partially included municipalities.

Maps of the geographical area can be accessed on the INAO website.

7. Wine grape variety(-ies)

Gewürztraminer Rs

Muscat Ottonel B – Muscat, Moscato

Muscat à petits grains blancs B – Muscat, Moscato

Muscat à petits grains roses Rs – Muscat, Moscato

Pinot Gris G

Riesling B

8. Description of the link(s)

Thanks to the favourable climate conditions characteristic of the vineyards of Alsace, the protected designation of origin ‘Alsace grand cru Furstentum’ benefits from one of the best locations. Nestling in the picturesque countryside of Alsace, the vineyards enable the production of highly expressive wines, with distinctive character and unique personality.

The sheltered location and the type of soil in the Grand Cru vineyard result in wines with a great variety of aromas, including spicy and floral notes that fade to reveal more mineral undertones. The citrus acidity is accompanied by a tannic structure that makes the wines particularly suitable for ageing.

The excellent climate conditions at the end of the season are favourable to concentration on the vine and to the development of the noble rot. As a result, it is possible to produce wines from grapes harvested when overripe.

The maturation period laid down in the specification allows the wines to improve.

There are strict rules relating to production, such as maintaining a broad canopy and harvesting by hand. By adopting these rules, the winegrowers of Alsace preserve the established character of the wines, which are known for their complexity and their suitability for long keeping.

They are the top of the range for this region. These wines are more prestigious than wines with the protected designation of origin ‘Alsace’.

9. Essential further conditions (packaging, labelling, other requirements)

Area in immediate proximity

Legal framework

National legislation

Type of further condition

Derogation concerning production in the demarcated geographical area

Description of the condition

The area in the immediate vicinity, defined by derogation for winemaking, processing and maturing, comprises the territory of the following municipalities, based on the 2021 Official Geographic Code:

—

Department of Haut-Rhin: Entire municipalities: Bergholtz-Zell, Berrwiller, Buhl, Cernay, Colmar, Gundolsheim, Hartmanswiller, Herrlisheim, Houssen, Husseren-les-Châteaux, Jungholtz, Leimbach, Obermorschwihr, Osenbach, Ostheim, Rorschwihr, Soultz, Steinbach, Uffholtz, Walbach, Wattwiller, Wihr-au-Val and Zimmerbach.

Municipalities partially included: Kaysersberg Vignoble, only the territory of the delegated municipality of Kaysersberg.

—

Department of Bas-Rhin: Albé, Avolsheim, Balbronn, Bernardswiller, Bernardvillé, Bischoffsheim, Boersch, Bourgheim, Châtenois, Cleebourg, Dachstein, Dangolsheim, Dieffenthal, Dorlisheim, Epfig, Ergersheim, Ernolsheim-Bruche, Fessenheim-le-Bas, Flexbourg, Furdenheim, Gertwiller, Gimbrett-Berstett, Goxwiller, Heiligenstein, Itterswiller, Kienheim, Kirchheim, Kuttolsheim, Mittelhausen, Mutzig, Nordheim, Oberhoffen-les-Wissenbourg, Obernai, Odratzheim, Orschwiller, Osthoffen, Ottrott, Petersbach, Reichsfeld, Riedseltz, Rosenwiller, Rosheim, Rott, Saint-Nabor, Saint-Pierre, Scherwiller, Seebach, Soultz-les-Bains, Steinseltz, Stotzheim, Strasbourg, Traenheim, Villé, Wangen, Westhoffen, Wissembourg and Zellwiller.

Packaging in the area

Legal framework

National legislation

Type of further condition

Packaging in the demarcated geographical area

Description of the condition

The wines are packaged in ‘Vin du Rhin’ bottles, in accordance with Decree No 55-673 of 20 May 1955, the Order of 13 May 1959 and the Decree of 19 March 1963. No other type of bottle is permitted.

Since the Law of 5 July 1972, the wines must be bottled in the departments of Bas-Rhin and Haut-Rhin in tall, thin ‘Vin du Rhin’ bottles, as laid down in the Decree of 1955.

Stating the vintage

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

The vintage must appear, together with the name of the designation, in any harvest and stock declarations, supporting documents or publicity and on any leaflets, labels, invoices or containers.

Common name

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

The name of the protected designation of origin may be supplemented by one of the common names of the grape varieties, on condition that the wines are made exclusively from grape varieties that can be referred to using the names in question.

Use of two or more common names on the same label is prohibited.

The common names are as follows:

Gewürztraminer

Muscat

Muscat Ottonel

Pinot Gris

Riesling.

Traditional terms ‘Vendanges Tardives’ and ‘Sélection de Grains Nobles’

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

For wines eligible for the term ‘Vendanges Tardives’ or ‘Sélection de Grains Nobles’, the following must also be stated:

—

vintage

—	one of the common forms of the grape variety name.

Indication of the sugar content

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

The sugar content, as defined by European law, must be clearly stated in the case of white wines for which one of the 51 protected designations of origin ‘Alsace Grand Cru – lieu-dit’ is claimed under the terms of this specification. This applies when such wines are presented under the aforementioned designation and made available to the public, dispatched, offered for sale or sold, which cannot happen unless the sugar content is stated in any publicity and on any leaflets, labels, invoices or containers. It does not apply to wines labelled ‘Vendanges Tardives’ or ‘Sélection de Grains Nobles’.

Link to the product specification

https://info.agriculture.gouv.fr/gedei/site/bo-agri/document_administratif-4cec3ff9-abd4-4253-a1db-245ddd809faa

(1) OJ L 9, 11.1.2019, p. 2.

5.10.2022

Official Journal of the European Union

C 384/25

(2022/C 384/05)

This communication is published in accordance with Article 17(5) of Commission Delegated Regulation (EU) 2019/33 (1).

COMMUNICATING THE APPROVAL OF A STANDARD AMENDMENT

‘Alsace grand cru Kaefferkopf’

PDO-FR-A0914-AM02

Date of communication: 20 July 2022

DESCRIPTION OF AND REASONS FOR THE APPROVED AMENDMENT

1. Additional indication

These amendments do not require any amendments to the single document.

2. Types of product

The ‘Alsace grand cru’ protected designations of origin which cover red and white still wines are mentioned by name: ‘Alsace grand cru Hengst’ and ‘Alsace grand cru Kirchberg de Barr’.

This amendment does not affect the single document.

3. Geographical area

These editorial changes do not affect the boundary of the geographical area.

The following sentences have also been added to Section IV(1):

‘Maps of the geographical area can be accessed on the INAO website.

A map defining the boundaries of the geographical area has been lodged with the municipal authorities in the case of the partially included municipality.’

These amendments require the amendment of point 6 of the single document.

4. Demarcated parcel area

In Chapter I, Section IV(2), of the specification:

—	in order to correct an oversight, the words ‘6 and 7 September 2006’ have been added to the first paragraph. This is a date on which the parcel area was approved by the relevant national committee;

—	in the second paragraph, the wording has been amended to take into account the changes made to the names of municipalities in Section IV(1);

—	the ‘Municipalities’ column in the table has been updated to correspond to the names of municipalities mentioned in Section IV(1).

These amendments do not affect the single document.

5. Area in immediate proximity

These editorial changes do not affect the boundary of the area in immediate proximity.

These amendments require the amendment of point 9 of the single document.

6. Vine varieties

The single document has not been changed on account of these amendments.

7. Planting density

The single document has not been changed on account of these additions.

This amendment requires the amendment of point 5 of the single document.

8. Pruning rule

This development makes it possible to harmonise the wording in the specifications of the Alsace designations of origin, and to simplify the methods of checking.

Point 5 of the single document has been amended.

The above amendments do not affect the single document.

9. Rules on trellising and foliage height

These amendments make it possible to verify that the foliage height is compliant as the plants grow. Previously this was possible only through a requirement relating to the support.

This amendment does not affect the single document.

10. Average maximum crop load per parcel

An average maximum crop load per parcel has been established for red wines. It is less than that for white wine, reflecting the yields for red wines.

These amendments do not affect the single document.

11. Ripeness of grapes and minimum natural alcoholic strength by volume

These amendments do not affect the single document.

12. Yields

Point 5 of the single document has been amended for the maximum yields (upper yield limits).

The latter amendments do not affect the single document.

13. Malolactic fermentation, fermentable sugar content for red wines

Chapter I, Section IX(1)(c), of the specification lays down that malolactic fermentation is carried out for red wines.

For the purpose of checking compliance with this rule, the maximum malic acid content has been established as 0,4 grams per litre at the time of packaging.

Section IX(1)(d) lays down a maximum content for fermentable sugars (glucose and fructose) of 2 grams per litre after fermentation.

The single document has not been amended.

14. Increasing the minimum natural alcoholic strength by volume prohibited for red wines

The single document has not been amended.

15. Capacity of the winery

In Chapter I, Section IX(1)(g), of the specification, the coefficient for calculating the capacity of the winery has been reduced.

The capacity of the winery does not need to be as large in proportion to the volume of the preceding harvest.

This amendment does not affect the single document.

16. Date of maturing and placing on the market for consumers in the case of red wines

In Chapter I, Section IX(5)(a), it is stated that, following the maturation period, red wines cannot be placed on the market for consumers until 1 October of the year following the harvest.

These amendments do not require any amendments to the single document.

17. Checks on packaged batches

In Chapter I, Section IX(3)(b), of the specification, the rule has been abolished that required sample bottles to be kept for checks on packaged batches.

This rule is a measure of verifiability. It is now part of the checking plan.

The single document is not affected by this amendment.

18. Storing packaged wines

In Chapter I, Section IX(4), of the specification, further details have been provided of the characteristics of the place where packaged wines are stored.

This helps operators to comply with this rule, and makes checking easier.

This amendment does not affect the single document.

19. Human factors contributing to the link with the geographical area

—

The single document has not been changed on account of these amendments.

20. Description of the wine(s)

In Chapter I, Section X(2), of the specification, details have been added of the visual appearance of the white wines in order to characterise them more fully.

In the case of the first two types of wine described: ‘The colour of these two types of wine is deep and intense and ranges to golden yellow.’

Details of the last two types of wine: ‘The colour of these two types of wine is deep and intense and ranges to amber yellow.’

Point 4 of the single document has been amended.

A description of the main organoleptic characteristics of the red wines has been added for the designations of origin ‘Alsace grand cru Hengst’ and ‘Alsace grand cru Kirchberg de Barr’.

These descriptions do not affect the single document.

21. Link with the geographical area

The single document has not been amended.

22. Transitional measures

This amendment does not affect the single document.

23. Requirement to state the sugar content on labelling and other formats giving information for white wines

This information makes it easier for consumers to understand the type of wine.

The new rule does not apply to wines bearing the traditional terms ‘Vendanges Tardives’ and ‘Sélection de Grains Nobles’ [includes botrytised grapes].

Point 9 of the single document has been supplemented.

The original point (d) of Section XII(2) is now point (e).

This amendment does not affect the single document.

24. Advance declaration of the assignment of parcels

This amendment does not affect the single document.

25. Description of the wine(s): Traditional terms ‘Vendanges Tardives’ and ‘Sélection de Grains Nobles’ and common forms of the names of grape varieties

In points 4.2 and 4.3 of the single document, ‘Description of the wine(s)’: a clerical error has been corrected by removing the variety Pinot Gris G from the brief written description of the wines for the traditional terms ‘Vendanges Tardives’ and ‘Sélection de Grains Nobles’. No version of the product specification for the designation ‘Alsace grand cru Kaefferkopf’ has ever authorised the use of this variety for the production of wine bearing either of these traditional terms.

In point 9 of the single document, ‘Additional conditions’:

—

the heading ‘Traditional terms’ has been corrected to specify the only two common forms of the names of grape varieties authorised for the terms ‘Vendanges Tardives’ and ‘Sélection de Grains Nobles’, because the grape variety Pinot Gris G is not authorised for the production of wine bearing these traditional terms.

This deletion corrects a clerical error in the previous version of the single document.

SINGLE DOCUMENT

1. Name(s)

Alsace grand cru Kaefferkopf

2. Geographical indication type

PDO – Protected designation of origin

3. Categories of grapevine products

Wine

4. Description of the wine(s)

BRIEF WRITTEN DESCRIPTION

The wines are still and white.

The minimum natural alcoholic strength by volume of the wines is 12,5 % for Gewürztraminer Rs and Pinot Gris G, 12 % for wines produced from a blend of varieties and 11 % for Riesling. After enrichment, the total alcoholic strength by volume of the wines does not exceed 14 % for wines made from the variety Riesling, and 15 % for blended wines and wines made from the varieties Gewürztraminer B and Pinot Gris G.

The other analytical characteristics are as laid down by EU legislation.

There are two types: — dry wines with minerality; — aromatic wines that are fruity, unctuous and rich. The colour of these two types of wine is deep and intense and ranges to golden yellow.

General analytical characteristics
Maximum total alcoholic strength (in % volume)
Minimum actual alcoholic strength (in % volume)
Minimum total acidity	in milliequivalents per litre
Maximum volatile acidity (in milliequivalents per litre)
Maximum total sulphur dioxide (in milligrams per litre)

2. Designation followed by the words ‘Vendanges Tardives’

BRIEF WRITTEN DESCRIPTION

The minimum natural alcoholic strength by volume of the wines is 16 % for Gewürztraminer Rs and 14,5 % for Riesling.

The other analytical characteristics are as laid down by EU legislation.

General analytical characteristics
Maximum total alcoholic strength (in % volume)
Minimum actual alcoholic strength (in % volume)
Minimum total acidity	in milliequivalents per litre
Maximum volatile acidity (in milliequivalents per litre)
Maximum total sulphur dioxide (in milligrams per litre)

3. Designation followed by the words ‘Sélection de Grains Nobles’

BRIEF WRITTEN DESCRIPTION

The minimum natural alcoholic strength by volume of the wines is 18,2 % for Gewürztraminer Rs and 16,4 % for Riesling.

The other analytical characteristics are as laid down by EU legislation.

General analytical characteristics
Maximum total alcoholic strength (in % volume)
Minimum actual alcoholic strength (in % volume)
Minimum total acidity	in milliequivalents per litre
Maximum volatile acidity (in milliequivalents per litre)
Maximum total sulphur dioxide (in milligrams per litre)

5. Wine-making practices

5.1. Specific oenological practices

1. Training systems: planting density

Cultivation method

The minimum vine planting density is 4 500 plants per hectare.

The distance between the rows of vines must not exceed 2 metres.

Vines have an in-the-row spacing of no less than 0,75 metres and no more than 1,50 metres.

As of 25 October 2011, grubbing-up of rows within a parcel must not result in spacing wider than 3 metres between the rows.

2. Training systems: pruning rule

Cultivation method

The vines are pruned to single or double Guyot with a maximum of 18 buds per plant.

3. Harvest

Cultivation method

The wines are made from grapes harvested manually.

4. Increase in the minimum natural alcoholic strength by volume

Specific oenological practice

Any increase in the minimum natural alcoholic strength by volume must not exceed:

0,5 % for wines made from the varieties Gewürztraminer B and Pinot Gris G,

1,5 % for wines made from other varieties and for wines made from a blend of varieties.

Wines eligible for the term ‘Vendanges Tardives’ or ‘Sélection de Grains Nobles’ must not be enriched.

5. Production

Wine-making restriction

Use of wood chips is prohibited.

6. Maturing the wines

Specific oenological practice

The wines must be matured until at least 1 June of the year following the harvest.

Wines eligible for the term ‘Vendanges Tardives’ or ‘Sélection de Grains Nobles’ must be matured until at least 1 June of the second year following the harvest.

5.2. Maximum yields

1. Designation with or without the additional term ‘Vendanges Tardives’

60 hectolitres per hectare

2. Designation followed by the words ‘Sélection de Grains Nobles’

48 hectolitres per hectare

6. Demarcated geographical area

The grapes are harvested and the wines are produced, developed and matured in the following municipalities, based on the 2021 Official Geographic Code:

—

Municipalities partially included: Kaysersberg Vignoble, only the territory of the delegated municipalities of Kientzheim and Sigolsheim.

—	Department of Bas-Rhin: Andlau, Barr, Bergbieten, Blienschwiller, Dahlenheim, Dambach-la-Ville, Eichhoffen, Kintzheim, Marlenheim, Mittelbergheim, Molsheim, Nothalten, Scharrachbergheim-Irmstett and Wolxheim.

A map defining the boundaries of the geographical area has been lodged with the municipal authorities of the partially included municipalities.

Maps of the geographical area can be accessed on the INAO website.

7. Wine grape variety(-ies)

Gewürztraminer Rs

Pinot Gris G

Riesling B

8. Description of the link(s)

Thanks to the favourable climate conditions characteristic of the vineyards of Alsace, the protected designation of origin ‘Alsace grand cru Kaefferkopf’ benefits from one of the best locations. Nestling in the picturesque countryside of Alsace, the vineyards enable the production of highly expressive wines, with distinctive character and unique personality.

The protection from cold wind and sun overexposure offered by the unique location and the saturation of the soils with calcium and magnesium produce powerful, robust, complex and creamy wines with a pleasant freshness to the taste. These characteristics, which are particularly noticeable in the blended wines, are expressed particularly well after several years of keeping. The wines then reveal a strong personality underlined by a fine aromatic and saline length.

Maturation allows the wines to improve.

They are the top of the range for this region. These wines are more prestigious than wines with the protected designation of origin ‘Alsace’.

The work by Médard Barth entitled Der Rebbau des Elsass und die Absatzgebieten seiner Weine, written in 1958, spoke highly of this lieu-dit, which today is famous.

9. Essential further conditions (packaging, labelling, other requirements)

Area in immediate proximity

Legal framework

National legislation

Type of further condition

Derogation concerning production in the demarcated geographical area

Description of the condition

The area in the immediate vicinity, defined by derogation for winemaking, processing and maturing, comprises the territory of the following municipalities, based on the 2021 Official Geographic Code:

—

Municipalities partially included: Kaysersberg Vignoble, only the territory of the delegated municipality of Kaysersberg.

—

Packaging in the area

Legal framework

National legislation

Type of further condition

Packaging in the demarcated geographical area

Description of the condition

Since the Law of 5 July 1972, the wines must be bottled in the departments of Bas-Rhin and Haut-Rhin in tall, thin ‘Vin du Rhin’ bottles, as laid down in the Decree of 1955.

Stating the vintage

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

The vintage must appear, together with the name of the designation, in any harvest and stock declarations, supporting documents or publicity and on any leaflets, labels, invoices or containers.

Common name

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

Use of two or more common names on the same label is prohibited.

The common names are as follows:

Gewürztraminer

Pinot Gris

Riesling.

Traditional terms ‘Vendanges Tardives’ and ‘Sélection de Grains Nobles’

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

For wines eligible for the term ‘Vendanges Tardives’ or ‘Sélection de Grains Nobles’, the following must also be stated:

—

vintage

—	one of the following common forms of the grape variety name: Gewurztraminer, Riesling.

Indication of the sugar content

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

Link to the product specification

https://info.agriculture.gouv.fr/gedei/site/bo-agri/document_administratif-4cec3ff9-abd4-4253-a1db-245ddd809faa

(1) OJ L 9, 11.1.2019, p. 2.

5.10.2022

Official Journal of the European Union

C 384/37

(2022/C 384/06)

This communication is published in accordance with Article 17(5) of Commission Delegated Regulation (EU) 2019/33 (1).

COMMUNICATING THE APPROVAL OF A STANDARD AMENDMENT

‘Alsace grand cru Kastelberg’

PDO-FR-A0419-AM02

Date of communication: 20 July 2022

DESCRIPTION OF AND REASONS FOR THE APPROVED AMENDMENT

1. Additional indication

The common name ‘Pinot Noir’ has been added to tshe specification. This is because of an application submitted at national level for recognition of the still red wines of certain ‘Alsace grand cru’ designations of origin. This application for the recognition of a red wine is based on long-standing practice, reputation and the characteristics of the wines produced with grapes of the variety Pinot Noir N grown on demarcated parcels of these ‘Alsace grand cru’ designations. Pinot Noir N is the only variety authorised for these red wines.

These amendments do not require any amendments to the single document.

2. Types of product

The ‘Alsace grand cru’ protected designations of origin which cover red and white still wines are mentioned by name: ‘Alsace grand cru Hengst’ and ‘Alsace grand cru Kirchberg de Barr’.

This amendment does not affect the single document.

3. Geographical area

These editorial changes do not affect the boundary of the geographical area.

The following sentences have also been added to Section IV(1):

‘Maps of the geographical area can be accessed on the INAO website.

A map defining the boundaries of the geographical area has been lodged with the municipal authorities in the case of the partially included municipality.’

These amendments require the amendment of point 6 of the single document.

4. Demarcated parcel area

In Chapter I, Section IV(2), of the specification:

—	in order to correct an oversight, the words ‘6 and 7 September 2006’ have been added to the first paragraph. This is a date on which the parcel area was approved by the relevant national committee;

—	in the second paragraph, the wording has been amended to take into account the changes made to the names of municipalities in Section IV(1);

—	the ‘Municipalities’ column in the table has been updated to correspond to the names of municipalities mentioned in Section IV(1).

These amendments do not affect the single document.

5. Area in immediate proximity

These editorial changes do not affect the boundary of the area in immediate proximity.

These amendments require the amendment of point 9 of the single document.

6. Vine varieties

The single document has not been changed on account of these amendments.

7. Planting density

The single document has not been changed on account of these additions.

This amendment requires the amendment of point 5 of the single document.

8. Pruning rule

This development makes it possible to harmonise the wording in the specifications of the Alsace designations of origin, and to simplify the methods of checking.

Point 5 of the single document has been amended.

The above amendments do not affect the single document.

9. Rules on trellising and foliage height

These amendments make it possible to verify that the foliage height is compliant as the plants grow. Previously this was possible only through a requirement relating to the support.

This amendment does not affect the single document.

10. Average maximum crop load per parcel

An average maximum crop load per parcel has been established for red wines. It is less than that for white wine, reflecting the yields for red wines.

These amendments do not affect the single document.

11. Ripeness of grapes and minimum natural alcoholic strength by volume

These amendments do not affect the single document.

12. Yields

Point 5 of the single document has been amended for the maximum yields (upper yield limits).

The latter amendments do not affect the single document.

13. Malolactic fermentation, fermentable sugar content for red wines

Chapter I, Section IX(1)(c), of the specification lays down that malolactic fermentation is carried out for red wines.

For the purpose of checking compliance with this rule, the maximum malic acid content has been established as 0,4 grams per litre at the time of packaging.

Section IX(1)(d) lays down a maximum content for fermentable sugars (glucose and fructose) of 2 grams per litre after fermentation.

The single document has not been amended.

14. Increasing the minimum natural alcoholic strength by volume prohibited for red wines

The single document has not been amended.

15. Capacity of the winery

In Chapter I, Section IX(1)(g), of the specification, the coefficient for calculating the capacity of the winery has been reduced.

The capacity of the winery does not need to be as large in proportion to the volume of the preceding harvest.

This amendment does not affect the single document.

16. Date of maturing and placing on the market for consumers in the case of red wines

In Chapter I, Section IX(5)(a), it is stated that, following the maturation period, red wines cannot be placed on the market for consumers until 1 October of the year following the harvest.

These amendments do not require any amendments to the single document.

17. Checks on packaged batches

In Chapter I, Section IX(3)(b), of the specification, the rule has been abolished that required sample bottles to be kept for checks on packaged batches.

This rule is a measure of verifiability. It is now part of the checking plan.

The single document is not affected by this amendment.

18. Storing packaged wines

In Chapter I, Section IX(4), of the specification, further details have been provided of the characteristics of the place where packaged wines are stored.

This helps operators to comply with this rule, and makes checking easier.

This amendment does not affect the single document.

19. Human factors contributing to the link with the geographical area

—

The single document has not been changed on account of these amendments.

20. Description of the wine(s)

In Chapter I, Section X(2), of the specification, details have been added of the visual appearance of the white wines in order to characterise them more fully.

In the case of the first two types of wine described: ‘The colour of these two types of wine is deep and intense and ranges to golden yellow.’

Details of the last two types of wine: ‘The colour of these two types of wine is deep and intense and ranges to amber yellow.’

Point 4 of the single document has been amended.

A description of the main organoleptic characteristics of the red wines has been added for the designations of origin ‘Alsace grand cru Hengst’ and ‘Alsace grand cru Kirchberg de Barr’.

These descriptions do not affect the single document.

21. Link with the geographical area

The single document has not been amended.

22. Transitional measures

This amendment does not affect the single document.

23. Requirement to state the sugar content on labelling and other formats giving information for white wines

This information makes it easier for consumers to understand the type of wine.

The new rule does not apply to wines bearing the traditional terms ‘Vendanges Tardives’ and ‘Sélection de Grains Nobles’ [includes botrytised grapes].

Point 9 of the single document has been supplemented.

The original point (d) of Section XII(2) is now point (e).

This amendment does not affect the single document.

24. Advance declaration of the assignment of parcels

This amendment does not affect the single document.

SINGLE DOCUMENT

1. Name(s)

Alsace grand cru Kastelberg

2. Geographical indication type

PDO – Protected designation of origin

3. Categories of grapevine products

Wine

4. Description of the wine(s)

BRIEF WRITTEN DESCRIPTION

The wines are still and white.

The other analytical characteristics are as laid down by EU legislation.

There are two types: — dry wines with minerality; — aromatic wines that are fruity, unctuous and rich. The colour of these two types of wine is deep and intense and ranges to golden yellow.

General analytical characteristics
Maximum total alcoholic strength (in % volume)
Minimum actual alcoholic strength (in % volume)
Minimum total acidity	in milliequivalents per litre
Maximum volatile acidity (in milliequivalents per litre)
Maximum total sulphur dioxide (in milligrams per litre)

2. Designation followed by the words ‘Vendanges Tardives’

BRIEF WRITTEN DESCRIPTION

The minimum natural alcoholic strength by volume of the wines is 16 % for Gewürztraminer Rs and Pinot Gris G, and 14,5 % for the other varieties.

The other analytical characteristics are as laid down by EU legislation.

General analytical characteristics
Maximum total alcoholic strength (in % volume)
Minimum actual alcoholic strength (in % volume)
Minimum total acidity	in milliequivalents per litre
Maximum volatile acidity (in milliequivalents per litre)
Maximum total sulphur dioxide (in milligrams per litre)

3. Designation followed by the words ‘Sélection de Grains Nobles’

BRIEF WRITTEN DESCRIPTION

The minimum natural alcoholic strength by volume of the wines is 18,2 % for Gewürztraminer Rs and Pinot Gris G, and 16,4 % for other varieties.

The other analytical characteristics are as laid down by EU legislation.

General analytical characteristics
Maximum total alcoholic strength (in % volume)
Minimum actual alcoholic strength (in % volume)
Minimum total acidity	in milliequivalents per litre
Maximum volatile acidity (in milliequivalents per litre)
Maximum total sulphur dioxide (in milligrams per litre)

5. Wine-making practices

5.1. Specific oenological practices

1. Training systems: planting density

Cultivation method

The minimum vine planting density is 4 500 plants per hectare.

The distance between the rows of vines must not exceed 2 metres.

Vines have an in-the-row spacing of no less than 0,75 metres and no more than 1,50 metres.

As of 25 October 2011, grubbing-up of rows within a parcel must not result in spacing wider than 3 metres between the rows.

2. Training systems: pruning rule

Cultivation method

The vines are pruned to single or double Guyot with a maximum of 18 buds per plant.

3. Harvest

Cultivation method

The wines are made from grapes harvested manually.

4. Increase in the minimum natural alcoholic strength by volume

Specific oenological practice

Any increase in the minimum natural alcoholic strength by volume must not exceed:

0,5 % for wines made from the varieties Gewürztraminer B and Pinot Gris G,

1,5 % for wines made from other varieties.

Wines eligible for the term ‘Vendanges Tardives’ or ‘Sélection de Grains Nobles’ must not be enriched.

5. Production

Wine-making restriction

Use of wood chips is prohibited.

6. Maturing the wines

Specific oenological practice

The wines must be matured until at least 1 June of the year following the harvest.

Wines eligible for the term ‘Vendanges Tardives’ or ‘Sélection de Grains Nobles’ must be matured until at least 1 June of the second year following the harvest.

5.2. Maximum yields

1. Designation with or without the additional term ‘Vendanges Tardives’

60 hectolitres per hectare

2. Designation followed by the words ‘Sélection de Grains Nobles’

48 hectolitres per hectare

6. Demarcated geographical area

The grapes are harvested and the wines are produced, developed and matured in the following municipalities, based on the 2021 Official Geographic Code:

—

Municipalities partially included: Kaysersberg Vignoble, only the territory of the delegated municipalities of Kientzheim and Sigolsheim.

—	Department of Bas-Rhin: Andlau, Barr, Bergbieten, Blienschwiller, Dahlenheim, Dambach-la-Ville, Eichhoffen, Kintzheim, Marlenheim, Mittelbergheim, Molsheim, Nothalten, Scharrachbergheim-Irmstett and Wolxheim.

A map defining the boundaries of the geographical area has been lodged with the municipal authorities of the partially included municipalities.

Maps of the geographical area can be accessed on the INAO website.

7. Wine grape variety(-ies)

Gewürztraminer Rs

Muscat Ottonel B – Muscat, Moscato

Muscat à petits grains blancs B – Muscat, Moscato

Muscat à petits grains roses Rs – Muscat, Moscato

Pinot Gris G

Riesling B

8. Description of the link(s)

Thanks to the favourable climate conditions characteristic of the vineyards of Alsace, the protected designation of origin ‘Alsace grand cru Kastelberg’ benefits from one of the best locations. Nestling in the picturesque countryside of Alsace, the vineyards enable the production of highly expressive wines, with distinctive character and unique personality.

The shale soils bring out the potential of this grand cru, which is marked by a pleasing minerality, resulting in full-bodied, distinguished and frank wines.

The maturation period laid down in the specification allows the wines to improve.

They are the top of the range for this region. These wines are more prestigious than wines with the protected designation of origin ‘Alsace’.

In his work entitled Premières notions de viticulture et d’œnologie [Basic concepts of winemaking and oenology], published in 1847, Jean Louis Stoltz wrote that Kastelberg is a great vin de garde (wine well-suited to ageing). Kastelberg was also classified as one of the major areas in the official classification of 1852 in the work entitled Ampélographie rhénane [Rhine ampelography].

The work by Médard Barth entitled Der Rebbau des Elsass und die Absatzgebieten seiner Weine, written in 1958, spoke highly of this lieu-dit, which today is famous.

9. Essential further conditions (packaging, labelling, other requirements)

Area in immediate proximity

Legal framework

National legislation

Type of further condition

Derogation concerning production in the demarcated geographical area

Description of the condition

The area in the immediate vicinity, defined by derogation for winemaking, processing and maturing, comprises the territory of the following municipalities, based on the 2021 Official Geographic Code:

—

Municipalities partially included: Kaysersberg Vignoble, only the territory of the delegated municipality of Kaysersberg.

—

Packaging in the area

Legal framework

National legislation

Type of further condition

Packaging in the demarcated geographical area

Description of the condition

Since the Law of 5 July 1972, the wines must be bottled in the departments of Bas-Rhin and Haut-Rhin in tall, thin ‘Vin du Rhin’ bottles, as laid down in the Decree of 1955.

Stating the vintage

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

The vintage must appear, together with the name of the designation, in any harvest and stock declarations, supporting documents or publicity and on any leaflets, labels, invoices or containers.

Common name

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

Use of two or more common names on the same label is prohibited.

The common names are as follows:

Gewürztraminer

Muscat

Muscat Ottonel

Pinot Gris

Riesling.

Traditional terms ‘Vendanges Tardives’ and ‘Sélection de Grains Nobles’

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

For wines eligible for the term ‘Vendanges Tardives’ or ‘Sélection de Grains Nobles’, the following must also be stated:

—

vintage

—	one of the common forms of the grape variety name.

Indication of the sugar content

Legal framework

National legislation

Type of further condition

Additional provisions relating to labelling

Description of the condition

Link to the product specification

https://info.agriculture.gouv.fr/gedei/site/bo-agri/document_administratif-4cec3ff9-abd4-4253-a1db-245ddd809faa

(1) OJ L 9, 11.1.2019, p. 2.

		ISSN 1977-091X
Official Journal of the European Union		C 384

English edition	Information and Notices	Volume 65 5 October 2022

Contents		page
	II Information
	INFORMATION FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
	European Commission
2022/C 384/01	Non-opposition to a notified concentration (Case M.10696 – ARAMCO OVERSEAS COMPANY / BP EUROPA / LOTOS-AIR BP POLSKA) ( 1 )	1

	IV Notices
	NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
	European Commission
2022/C 384/02	Euro exchange rates — 4 October 2022	2

	Currency	Exchange rate
USD	US dollar	0,9891
JPY	Japanese yen	143,30
DKK	Danish krone	7,4374
GBP	Pound sterling	0,87273
SEK	Swedish krona	10,8166
CHF	Swiss franc	0,9767
ISK	Iceland króna	141,90
NOK	Norwegian krone	10,4915
BGN	Bulgarian lev	1,9558
CZK	Czech koruna	24,544
HUF	Hungarian forint	417,68
PLN	Polish zloty	4,8193
RON	Romanian leu	4,9418
TRY	Turkish lira	18,3374
AUD	Australian dollar	1,5318
CAD	Canadian dollar	1,3503
HKD	Hong Kong dollar	7,7644
NZD	New Zealand dollar	1,7368
SGD	Singapore dollar	1,4148
KRW	South Korean won	1 412,20
ZAR	South African rand	17,5437
CNY	Chinese yuan renminbi	7,0384
HRK	Croatian kuna	7,5230
IDR	Indonesian rupiah	15 080,18
MYR	Malaysian ringgit	4,5939
PHP	Philippine peso	58,104
RUB	Russian rouble
THB	Thai baht	37,160
BRL	Brazilian real	5,0589
MXN	Mexican peso	19,7770
INR	Indian rupee	80,6995

	V Announcements
	PROCEDURES RELATING TO THE IMPLEMENTATION OF THE COMMON COMMERCIAL POLICY
	European Commission
2022/C 384/03	Notice of initiation of an expiry review of the anti-dumping measures applicable to imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in the Federative Republic of Brazil, the Islamic Republic of Iran, the Russian Federation and Ukraine	3
	OTHER ACTS
	European Commission
2022/C 384/04	Publication of a communication of approval of a standard amendment to the product specification for a name in the wine sector referred to in Article 17(2) and (3) of Commission Delegated Regulation (EU) 2019/33	14
2022/C 384/05	Publication of a communication of approval of a standard amendment to the product specification for a name in the wine sector referred to in Article 17(2) and (3) of Commission Delegated Regulation (EU) 2019/33	25
2022/C 384/06	Publication of a communication of approval of a standard amendment to the product specification for a name in the wine sector referred to in Article 17(2) and (3) of Commission Delegated Regulation (EU) 2019/33	37


	(1) Text with EEA relevance.