ISSN 1977-091X
Official Journal
of the European Union
C 92
English edition
Information and Notices
Volume 61
9 March 2018
|
ISSN 1977-091X |
||
|
Official Journal of the European Union |
C 92 |
|
|
|
||
|
English edition |
Information and Notices |
Volume 61 |
|
|
|
|
|
(1) Text with EEA relevance. |
|
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 92/1 |
Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council on machinery, and amending Directive 95/16/EC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2018/C 092/01)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
A-type standards A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a full presumption of conformity. |
||||
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction (ISO 12100:2010) |
8.4.2011 |
EN ISO 12100-1:2003 EN ISO 12100-2:2003 EN ISO 14121-1:2007 Note 2.1 |
30.11.2013 |
|
B-type standards B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards. |
||||
|
CEN |
EN 349:1993+A1:2008 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
8.9.2009 |
|
|
|
CEN |
EN 547-1:1996+A1:2008 Safety of machinery — Human body measurements — Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
8.9.2009 |
|
|
|
CEN |
EN 547-2:1996+A1:2008 Safety of machinery — Human body measurements — Part 2: Principles for determining the dimensions required for access openings |
8.9.2009 |
|
|
|
CEN |
EN 547-3:1996+A1:2008 Safety of machinery — Human body measurements — Part 3: Anthropometric data |
8.9.2009 |
|
|
|
CEN |
EN 574:1996+A1:2008 Safety of machinery — Two-hand control devices — Functional aspects — Principles for design |
8.9.2009 |
|
|
|
CEN |
EN 614-1:2006+A1:2009 Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles |
8.9.2009 |
|
|
|
CEN |
EN 614-2:2000+A1:2008 Safety of machinery — Ergonomic design principles — Part 2: Interactions between the design of machinery and work tasks |
8.9.2009 |
|
|
|
CEN |
EN 842:1996+A1:2008 Safety of machinery — Visual danger signals — General requirements, design and testing |
8.9.2009 |
|
|
|
CEN |
EN 894-1:1997+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators |
8.9.2009 |
|
|
|
CEN |
EN 894-2:1997+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays |
8.9.2009 |
|
|
|
CEN |
EN 894-3:2000+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators |
8.9.2009 |
|
|
|
CEN |
EN 894-4:2010 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 4: Location and arrangement of displays and control actuators |
20.10.2010 |
|
|
|
CEN |
EN 981:1996+A1:2008 Safety of machinery — System of auditory and visual danger and information signals |
8.9.2009 |
|
|
|
CEN |
EN 1005-1:2001+A1:2008 Safety of machinery — Human physical performance — Part 1: Terms and definitions |
8.9.2009 |
|
|
|
CEN |
EN 1005-2:2003+A1:2008 Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and component parts of machinery |
8.9.2009 |
|
|
|
CEN |
EN 1005-3:2002+A1:2008 Safety of machinery — Human physical performance — Part 3: Recommended force limits for machinery operation |
8.9.2009 |
|
|
|
CEN |
EN 1005-4:2005+A1:2008 Safety of machinery — Human physical performance — Part 4: Evaluation of working postures and movements in relation to machinery |
8.9.2009 |
|
|
|
CEN |
EN 1032:2003+A1:2008 Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value |
8.9.2009 |
|
|
|
CEN |
EN 1037:1995+A1:2008 Safety of machinery — Prevention of unexpected start-up |
8.9.2009 |
|
|
|
CEN |
EN 1093-1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods |
8.9.2009 |
|
|
|
CEN |
EN 1093-2:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant |
8.9.2009 |
|
|
|
CEN |
EN 1093-3:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
8.9.2009 |
|
|
|
CEN |
EN 1093-4:1996+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 4: Capture efficiency of an exhaust system — Tracer method |
8.9.2009 |
|
|
|
CEN |
EN 1093-6:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 6: Separation efficiency by mass, unducted outlet |
8.9.2009 |
|
|
|
CEN |
EN 1093-7:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 7: Separation efficiency by mass, ducted outlet |
8.9.2009 |
|
|
|
CEN |
EN 1093-8:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Pollutant concentration parameter, test bench method |
8.9.2009 |
|
|
|
CEN |
EN 1093-9:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 9: Pollutant concentration parameter, room method |
8.9.2009 |
|
|
|
CEN |
EN 1093-11:2001+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 11: Decontamination index |
8.9.2009 |
|
|
|
CEN |
EN 1127-1:2011 Explosive atmospheres — Explosion prevention and protection — Part 1: Basic concepts and methodology |
18.11.2011 |
EN 1127-1:2007 Note 2.1 |
31.7.2014 |
|
CEN |
EN 1127-2:2014 Explosive atmospheres — Explosion prevention and protection — Part 2: Basic concepts and methodology for mining |
13.2.2015 |
EN 1127-2:2002+A1:2008 Note 2.1 |
13.2.2015 |
|
CEN |
EN 1299:1997+A1:2008 Mechanical vibration and shock — Vibration isolation of machines — Information for the application of source isolation |
8.9.2009 |
|
|
|
CEN |
EN 1837:1999+A1:2009 Safety of machinery — Integral lighting of machines |
18.12.2009 |
|
|
|
CEN |
EN ISO 3741:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms (ISO 3741:2010) |
8.4.2011 |
EN ISO 3741:2009 Note 2.1 |
30.4.2011 |
|
CEN |
EN ISO 3743-1:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
8.4.2011 |
EN ISO 3743-1:2009 Note 2.1 |
30.4.2011 |
|
CEN |
EN ISO 3743-2:2009 Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
18.12.2009 |
|
|
|
CEN |
EN ISO 3744:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
8.4.2011 |
EN ISO 3744:2009 Note 2.1 |
30.4.2011 |
|
CEN |
EN ISO 3745:2012 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012) |
5.6.2012 |
EN ISO 3745:2009 Note 2.1 |
30.9.2012 |
|
|
EN ISO 3745:2012/A1:2017 |
This is the first publication |
Note 3 |
30.6.2018 |
|
CEN |
EN ISO 3746:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
8.4.2011 |
EN ISO 3746:2009 Note 2.1 |
30.6.2011 |
|
CEN |
EN ISO 3747:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
8.4.2011 |
EN ISO 3747:2009 Note 2.1 |
30.6.2011 |
|
CEN |
EN ISO 4413:2010 Hydraulic fluid power — General rules and safety requirements for systems and their components (ISO 4413:2010) |
8.4.2011 |
EN 982:1996+A1:2008 Note 2.1 |
30.11.2011 |
|
CEN |
EN ISO 4414:2010 Pneumatic fluid power — General rules and safety requirements for systems and their components (ISO 4414:2010) |
8.4.2011 |
EN 983:1996+A1:2008 Note 2.1 |
30.11.2011 |
|
CEN |
EN ISO 4871:2009 Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
18.12.2009 |
|
|
|
CEN |
EN ISO 5136:2009 Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method (ISO 5136:2003) |
18.12.2009 |
|
|
|
CEN |
EN ISO 7235:2009 Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
18.12.2009 |
|
|
|
CEN |
EN ISO 7731:2008 Ergonomics — Danger signals for public and work areas — Auditory danger signals (ISO 7731:2003) |
8.9.2009 |
|
|
|
CEN |
EN ISO 9614-1:2009 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points (ISO 9614-1:1993) |
18.12.2009 |
|
|
|
CEN |
EN ISO 9614-3:2009 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
18.12.2009 |
|
|
|
CEN |
EN ISO 10326-1:2016 Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02) |
9.6.2017 |
EN 30326-1:1994 Note 2.1 |
30.11.2017 |
|
CEN |
EN ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements (ISO 11161:2007) |
26.5.2010 |
|
|
|
|
EN ISO 11161:2007/A1:2010 |
26.5.2010 |
Note 3 |
30.9.2010 |
|
CEN |
EN ISO 11200:2014 Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
13.2.2015 |
EN ISO 11200:2009 Note 2.1 |
13.2.2015 |
|
CEN |
EN ISO 11201:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
20.10.2010 |
EN ISO 11201:2009 Note 2.1 |
30.11.2010 |
|
CEN |
EN ISO 11202:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
20.10.2010 |
EN ISO 11202:2009 Note 2.1 |
30.11.2010 |
|
CEN |
EN ISO 11203:2009 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11204:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
20.10.2010 |
EN ISO 11204:2009 Note 2.1 |
30.11.2010 |
|
CEN |
EN ISO 11205:2009 Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11546-1:2009 Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11546-2:2009 Acoustics — Determination of sound insulation performances of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11688-1:2009 Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning (ISO/TR 11688-1:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11691:2009 Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method (ISO 11691:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11957:2009 Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements (ISO 11957:1996) |
18.12.2009 |
|
|
|
CEN |
EN 12198-1:2000+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 1: General principles |
8.9.2009 |
|
|
|
CEN |
EN 12198-2:2002+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 2: Radiation emission measurement procedure |
8.9.2009 |
|
|
|
CEN |
EN 12198-3:2002+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 3: Reduction of radiation by attenuation or screening |
8.9.2009 |
|
|
|
CEN |
EN 12254:2010 Screens for laser working places — Safety requirements and testing |
26.5.2010 |
EN 12254:1998+A2:2008 Note 2.1 |
30.9.2010 |
|
|
EN 12254:2010/AC:2011 |
|
|
|
|
CEN |
EN 12786:2013 Safety of machinery — Requirements for the drafting of the vibration clauses of safety standards |
28.11.2013 |
|
|
|
CEN |
EN 13490:2001+A1:2008 Mechanical vibration — Industrial trucks — Laboratory evaluation and specification of operator seat vibration |
8.9.2009 |
|
|
|
CEN |
EN ISO 13732-1:2008 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces (ISO 13732-1:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 13732-3:2008 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces (ISO 13732-3:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 13753:2008 Mechanical vibration and shock — Hand-arm vibration — Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) |
8.9.2009 |
|
|
|
CEN |
EN ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2015) |
13.5.2016 |
EN ISO 13849-1:2008 Note 2.1 |
30.6.2016 |
|
CEN |
EN ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation (ISO 13849-2:2012) |
5.4.2013 |
EN ISO 13849-2:2008 Note 2.1 |
30.4.2013 |
|
CEN |
EN ISO 13850:2015 Safety of machinery — Emergency stop function — Principles for design (ISO 13850:2015) |
13.5.2016 |
EN ISO 13850:2008 Note 2.1 |
31.5.2016 |
|
CEN |
EN ISO 13855:2010 Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
20.10.2010 |
EN 999:1998+A1:2008 Note 2.1 |
30.11.2010 |
|
CEN |
EN ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
28.11.2013 |
EN 1760-1:1997+A1:2009 Note 2.1 |
28.11.2013 |
|
CEN |
EN ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) |
28.11.2013 |
EN 1760-2:2001+A1:2009 Note 2.1 |
28.11.2013 |
|
CEN |
EN ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) |
28.11.2013 |
EN 1760-3:2004+A1:2009 Note 2.1 |
31.1.2014 |
|
CEN |
EN ISO 13857:2008 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 14119:2013 Safety of machinery — Interlocking devices associated with guards — Principles for design and selection (ISO 14119:2013) |
11.4.2014 |
EN 1088:1995+A2:2008 Note 2.1 |
30.4.2015 |
|
CEN |
EN ISO 14120:2015 Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards (ISO 14120:2015) |
13.5.2016 |
EN 953:1997+A1:2009 Note 2.1 |
31.5.2016 |
|
CEN |
EN ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
9.9.2016 |
EN ISO 14122-1:2001 Note 2.1 |
31.12.2016 |
|
CEN |
EN ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways (ISO 14122-2:2016) |
9.9.2016 |
EN ISO 14122-2:2001 Note 2.1 |
31.12.2016 |
|
CEN |
EN ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
9.9.2016 |
EN ISO 14122-3:2001 Note 2.1 |
31.12.2016 |
|
CEN |
EN ISO 14122-4:2016 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders (ISO 14122-4:2016) |
9.9.2016 |
EN ISO 14122-4:2004 Note 2.1 |
31.12.2016 |
|
CEN |
EN ISO 14123-1:2015 Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015) |
13.5.2016 |
EN 626-1:1994+A1:2008 Note 2.1 |
31.5.2016 |
|
CEN |
EN ISO 14123-2:2015 Safety of machinery — Reduction of risks to health resulting from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures (ISO 14123-2:2015) |
13.5.2016 |
EN 626-2:1996+A1:2008 Note 2.1 |
30.6.2016 |
|
CEN |
EN ISO 14159:2008 Safety of machinery — Hygiene requirements for the design of machinery (ISO 14159:2002) |
8.9.2009 |
|
|
|
CEN |
EN ISO 14738:2008 Safety of machinery — Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 15536-1:2008 Ergonomics — Computer manikins and body templates — Part 1: General requirements (ISO 15536-1:2005) |
8.9.2009 |
|
|
|
CEN |
EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
18.11.2011 |
|
|
|
CEN |
EN 16590-1:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 1: General principles for design and development (ISO 25119-1:2010 modified) |
13.2.2015 |
|
|
|
CEN |
EN 16590-2:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase (ISO 25119-2:2010 modified) |
13.2.2015 |
|
|
|
CEN |
EN ISO 19353:2016 Safety of machinery — Fire prevention and fire protection (ISO 19353:2015) |
9.9.2016 |
EN 13478:2001+A1:2008 Note 2.1 |
31.7.2016 |
|
CEN |
EN ISO 20643:2008 Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission (ISO 20643:2005) |
8.9.2009 |
|
|
|
|
EN ISO 20643:2008/A1:2012 |
15.11.2012 |
Note 3 |
31.1.2013 |
|
C-type standards C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer’s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard. |
||||
|
CEN |
EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts — Part 3: Electric and hydraulic service lifts |
8.9.2009 |
|
|
|
|
EN 81-3:2000+A1:2008/AC:2009 |
|
|
|
|
CEN |
EN 81-31:2010 Safety rules for the construction and installation of lifts — Lifts for the transport of goods only — Part 31: Accessible goods only lifts |
20.10.2010 |
|
|
|
CEN |
EN 81-40:2008 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
8.9.2009 |
|
|
|
CEN |
EN 81-41:2010 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
8.4.2011 |
|
|
|
CEN |
EN 81-43:2009 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 43: Lifts for cranes |
8.9.2009 |
|
|
|
CEN |
EN 115-1:2017 Safety of escalators and moving walks — Part 1: Construction and installation |
This is the first publication |
EN 115-1:2008+A1:2010 Note 2.1 |
31.1.2019 |
|
CEN |
EN 201:2009 Plastics and rubber machines — Injection moulding machines — Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels |
18.11.2011 |
EN 267:2009 Note 2.1 |
29.2.2012 |
|
CEN |
EN 280:2013+A1:2015 Mobile elevating work platforms — Design calculations — Stability criteria — Construction — Safety — Examinations and tests |
15.1.2016 |
EN 280:2013 Note 2.1 |
28.2.2017 |
|
CEN |
EN 289:2014 Plastics and rubber machines — Compression moulding machines and transfer moulding machines — Safety requirements |
13.2.2015 |
EN 289:2004+A1:2008 Note 2.1 |
13.2.2015 |
|
CEN |
EN 303-5:2012 Heating boilers — Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW — Terminology, requirements, testing and marking |
24.8.2012 |
|
|
|
CEN |
EN 378-2:2016 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation |
9.6.2017 |
EN 378-2:2008+A2:2012 Note 2.1 |
30.11.2017 |
|
CEN |
EN 415-1:2014 Safety of packaging machines — Part 1: Terminology and classification of packaging machines and associated equipment |
15.1.2016 |
EN 415-1:2000+A1:2009 Note 2.1 |
29.2.2016 |
|
CEN |
EN 415-3:1999+A1:2009 Safety of packaging machines — Part 3: Form, fill and seal machines |
18.12.2009 |
|
|
|
CEN |
EN 415-5:2006+A1:2009 Safety of packaging machines — Part 5: Wrapping machines |
18.12.2009 |
|
|
|
CEN |
EN 415-6:2013 Safety of packaging machines — Part 6: Pallet wrapping machines |
28.11.2013 |
EN 415-6:2006+A1:2009 Note 2.1 |
30.11.2013 |
|
CEN |
EN 415-7:2006+A1:2008 Safety of packaging machines — Part 7: Group and secondary packaging machines |
8.9.2009 |
|
|
|
CEN |
EN 415-8:2008 Safety of packaging machines — Part 8: Strapping machines |
8.9.2009 |
|
|
|
CEN |
EN 415-9:2009 Safety of packaging machines — Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
18.12.2009 |
|
|
|
CEN |
EN 415-10:2014 Safety of packaging machines — Part 10: General Requirements |
11.7.2014 |
|
|
|
CEN |
EN 422:2009 Plastics and rubber machines — Blow moulding machines — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 453:2014 Food processing machinery — Dough mixers — Safety and hygiene requirements |
15.1.2016 |
EN 453:2000+A1:2009 Note 2.1 |
29.2.2016 |
|
CEN |
EN 454:2014 Food processing machinery — Planetary mixers — Safety and hygiene requirements |
15.1.2016 |
EN 454:2000+A1:2009 Note 2.1 |
29.2.2016 |
|
CEN |
EN 474-1:2006+A4:2013 Earth-moving machinery — Safety — Part 1: General requirements |
28.11.2013 |
EN 474-1:2006+A3:2013 Note 2.1 |
28.11.2013 |
|
|
EN 474-1:2006+A4:2013/AC:2014 |
|
|
|
|
Warning: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. |
||||
|
CEN |
EN 474-2:2006+A1:2008 Earth-moving machinery — Safety — Part 2: Requirements for tractor-dozers |
8.9.2009 |
|
|
|
CEN |
EN 474-3:2006+A1:2009 Earth-moving machinery — Safety — Part 3: Requirements for loaders |
8.9.2009 |
|
|
|
CEN |
EN 474-4:2006+A2:2012 Earth-moving machinery — Safety — Part 4: Requirements for backhoe loaders |
23.3.2012 |
|
|
|
CEN |
EN 474-5:2006+A3:2013 Earth-moving machinery — Safety — Part 5: Requirements for hydraulic excavators |
28.11.2013 |
EN 474-5:2006+A1:2009+A2:2012 Note 2.1 |
31.1.2014 |
|
CEN |
EN 474-6:2006+A1:2009 Earth-moving machinery — Safety — Part 6: Requirements for dumpers |
8.9.2009 |
|
|
|
CEN |
EN 474-7:2006+A1:2009 Earth-moving machinery — Safety — Part 7: Requirements for scrapers |
8.9.2009 |
|
|
|
CEN |
EN 474-8:2006+A1:2009 Earth-moving machinery — Safety — Part 8: Requirements for graders |
8.9.2009 |
|
|
|
CEN |
EN 474-9:2006+A1:2009 Earth-moving machinery — Safety — Part 9: Requirements for pipelayers |
8.9.2009 |
|
|
|
CEN |
EN 474-10:2006+A1:2009 Earth-moving machinery — Safety — Part 10: Requirements for trenchers |
8.9.2009 |
|
|
|
CEN |
EN 474-11:2006+A1:2008 Earth-moving machinery — Safety — Part 11: Requirements for earth and landfill compactors |
8.9.2009 |
|
|
|
CEN |
EN 474-12:2006+A1:2008 Earth-moving machinery — Safety — Part 12: Requirements for cable excavators |
8.9.2009 |
|
|
|
CEN |
EN 500-1:2006+A1:2009 Mobile road construction machinery — Safety — Part 1: Common requirements |
26.5.2010 |
|
|
|
CEN |
EN 500-2:2006+A1:2008 Mobile road construction machinery — Safety — Part 2: Specific requirements for road-milling machines |
8.9.2009 |
|
|
|
CEN |
EN 500-3:2006+A1:2008 Mobile road construction machinery — Safety — Part 3: Specific requirements for soil-stabilising machines and recycling machines |
8.9.2009 |
|
|
|
CEN |
EN 500-4:2011 Mobile road construction machinery — Safety — Part 4: Specific requirements for compaction machines |
20.7.2011 |
EN 500-4:2006+A1:2009 Note 2.1 |
31.8.2011 |
|
CEN |
EN 500-6:2006+A1:2008 Mobile road construction machinery — Safety — Part 6: Specific requirements for paver-finishers |
8.9.2009 |
|
|
|
CEN |
EN 528:2008 Rail dependent storage and retrieval equipment — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 536:2015 Road construction machines — Mixing plants for road construction materials — Safety requirements |
15.1.2016 |
|
|
|
CEN |
EN 609-1:2017 Agricultural and forestry machinery — Safety of log splitters — Part 1: Wedge splitters |
9.6.2017 |
EN 609-1:1999+A2:2009 Note 2.1 |
30.6.2018 |
|
CEN |
EN 609-2:1999+A1:2009 Agricultural and forestry machinery — Safety of log splitters — Part 2: Screw splitters |
18.12.2009 |
|
|
|
CEN |
EN 617:2001+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
8.4.2011 |
|
|
|
CEN |
EN 618:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
8.4.2011 |
|
|
|
CEN |
EN 619:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads |
8.4.2011 |
|
|
|
CEN |
EN 620:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for fixed belt conveyors for bulk materials |
8.4.2011 |
|
|
|
CEN |
EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels |
8.9.2009 |
|
|
|
|
EN 676:2003+A2:2008/AC:2008 |
|
|
|
|
CEN |
EN 690:2013 Agricultural machinery — Manure spreaders — Safety |
11.4.2014 |
EN 690:1994+A1:2009 Note 2.1 |
30.4.2014 |
|
CEN |
EN 692:2005+A1:2009 Machine tools — Mechanical presses — Safety |
8.9.2009 |
|
|
|
CEN |
EN 693:2001+A2:2011 Machine tools — Safety — Hydraulic presses |
18.11.2011 |
EN 693:2001+A1:2009 Note 2.1 |
31.3.2012 |
|
CEN |
EN 703:2004+A1:2009 Agricultural machinery — Silage loading, mixing and/or chopping and distributing machines — Safety |
18.12.2009 |
|
|
|
CEN |
EN 706:1996+A1:2009 Agricultural machinery — Vine shoot tipping machines — Safety |
18.12.2009 |
|
|
|
CEN |
EN 707:1999+A1:2009 Agricultural machinery — Slurry tankers — Safety |
18.12.2009 |
|
|
|
CEN |
EN 709:1997+A4:2009 Agricultural and forestry machinery — Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) — Safety |
26.5.2010 |
EN 709:1997+A2:2009 Note 2.1 |
31.12.2010 |
|
|
EN 709:1997+A4:2009/AC:2012 |
|
|
|
|
CEN |
EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment |
20.10.2010 |
|
|
|
|
EN 710:1997+A1:2010/AC:2012 |
|
|
|
|
CEN |
EN 741:2000+A1:2010 Continuous handling equipment and systems — Safety requirements for systems and their components for pneumatic handling of bulk materials |
8.4.2011 |
|
|
|
CEN |
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment — Part 1: Common safety requirements for industrial thermoprocessing equipment |
18.12.2009 |
|
|
|
CEN |
EN 746-2:2010 Industrial thermoprocessing equipment — Part 2: Safety requirements for combustion and fuel handling systems |
20.10.2010 |
|
|
|
CEN |
EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment — Part 3: Safety requirements for the generation and use of atmosphere gases |
8.9.2009 |
|
|
|
CEN |
EN 786:1996+A2:2009 Garden equipment — Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety |
18.12.2009 |
|
|
|
CEN |
EN 792-13:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools |
8.9.2009 |
|
|
|
CEN |
EN 809:1998+A1:2009 Pumps and pump units for liquids — Common safety requirements |
18.12.2009 |
|
|
|
|
EN 809:1998+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 818-1:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 1: General conditions of acceptance |
8.9.2009 |
|
|
|
CEN |
EN 818-2:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 2: Medium tolerance chain for chain slings — Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 818-3:1999+A1:2008 Short link chain for lifting purposes — Safety — Part 3: Medium tolerance chain for chain slings — Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 818-4:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 4: Chain slings — Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 818-5:1999+A1:2008 Short link chain for lifting purposes — Safety — Part 5: Chain slings — Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 818-6:2000+A1:2008 Short link chain for lifting purposes — Safety — Part 6: Chain slings — Specification for information for use and maintenance to be provided by the manufacturer |
8.9.2009 |
|
|
|
CEN |
EN 818-7:2002+A1:2008 Short link chain for lifting purposes — Safety — Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
8.9.2009 |
|
|
|
CEN |
EN 848-1:2007+A2:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines |
15.11.2012 |
EN 848-1:2007+A1:2009 Note 2.1 |
31.3.2013 |
|
CEN |
EN 848-2:2007+A2:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 2: Single spindle hand fed/integrated fed routing machines |
15.11.2012 |
EN 848-2:2007+A1:2009 Note 2.1 |
31.3.2013 |
|
CEN |
EN 848-3:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 3: Numerically controlled (NC) boring and routing machines |
5.4.2013 |
EN 848-3:2007+A2:2009 Note 2.1 |
30.4.2013 |
|
CEN |
EN 859:2007+A2:2012 Safety of woodworking machines — Hand fed surface planing machines |
24.8.2012 |
EN 859:2007+A1:2009 Note 2.1 |
31.12.2012 |
|
CEN |
EN 860:2007+A2:2012 Safety of woodworking machines — One side thickness planing machines |
24.8.2012 |
EN 860:2007+A1:2009 Note 2.1 |
31.12.2012 |
|
CEN |
EN 861:2007+A2:2012 Safety of woodworking machines — Surface planing and thicknessing machines |
24.8.2012 |
EN 861:2007+A1:2009 Note 2.1 |
31.12.2012 |
|
CEN |
EN 869:2006+A1:2009 Safety of machinery — Safety requirements for pressure metal diecasting units |
8.9.2009 |
|
|
|
CEN |
EN 908:1999+A1:2009 Agricultural and forestry machinery — Reel machines for irrigation — Safety |
18.12.2009 |
|
|
|
CEN |
EN 909:1998+A1:2009 Agricultural and forestry machinery — Centre pivot and moving lateral types irrigation machines — Safety |
18.12.2009 |
|
|
|
CEN |
EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines — Roughing, scouring, polishing and trimming machines — Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 931:1997+A2:2009 Footwear manufacturing machines — Lasting machines — Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 940:2009+A1:2012 Safety of woodworking machines — Combined woodworking machines |
5.6.2012 |
EN 940:2009 Note 2.1 |
31.8.2012 |
|
CEN |
EN 957-6:2010+A1:2014 Stationary training equipment — Part 6: Treadmills, additional specific safety requirements and test methods |
13.2.2015 |
|
|
|
CEN |
EN 972:1998+A1:2010 Tannery machines — Reciprocating roller machines — Safety requirements |
8.4.2011 |
|
|
|
|
EN 972:1998+A1:2010/AC:2011 |
|
|
|
|
CEN |
EN 1010-1:2004+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 1: Common requirements |
8.4.2011 |
|
|
|
CEN |
EN 1010-2:2006+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 2: Printing and varnishing machines including pre-press machinery |
8.4.2011 |
|
|
|
CEN |
EN 1010-3:2002+A1:2009 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 3: Cutting machines |
18.12.2009 |
|
|
|
CEN |
EN 1010-4:2004+A1:2009 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 4: Bookbinding, paper converting and finishing machines |
18.12.2009 |
|
|
|
CEN |
EN 1012-1:2010 Compressors and vacuum pumps — Safety requirements — Part 1: Air compressors |
8.4.2011 |
|
|
|
CEN |
EN 1012-2:1996+A1:2009 Compressors and vacuum pumps — Safety requirements — Part 2: Vacuum pumps |
18.12.2009 |
|
|
|
CEN |
EN 1012-3:2013 Compressors and vacuum pumps — Safety requirements — Part 3: Process compressors |
11.4.2014 |
|
|
|
CEN |
EN 1028-1:2002+A1:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 1: Classification — General and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1028-2:2002+A1:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 2: Verification of general and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1034-1:2000+A1:2010 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 1: Common requirements |
26.5.2010 |
|
|
|
CEN |
EN 1034-2:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 2: Barking drums |
26.5.2010 |
|
|
|
CEN |
EN 1034-3:2011 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 3: Rereelers and winders |
29.2.2012 |
EN 1034-3:1999+A1:2009 Note 2.1 |
30.6.2012 |
|
CEN |
EN 1034-4:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 4: Pulpers and their loading facilities |
26.5.2010 |
|
|
|
CEN |
EN 1034-5:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 5: Sheeters |
26.5.2010 |
|
|
|
CEN |
EN 1034-6:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 6: Calender |
26.5.2010 |
|
|
|
CEN |
EN 1034-7:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 7: Chests |
26.5.2010 |
|
|
|
CEN |
EN 1034-8:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 8: Refining plants |
5.6.2012 |
|
|
|
CEN |
EN 1034-13:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 13: Machines for de-wiring bales and units |
26.5.2010 |
|
|
|
CEN |
EN 1034-14:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 14: Reel splitter |
26.5.2010 |
|
|
|
CEN |
EN 1034-16:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 16: Paper and board making machines |
5.6.2012 |
|
|
|
CEN |
EN 1034-17:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 17: Tissue making machines |
15.11.2012 |
|
|
|
CEN |
EN 1034-21:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 21: Coating machines |
15.11.2012 |
|
|
|
CEN |
EN 1034-22:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 22: Wood Grinders |
26.5.2010 |
|
|
|
CEN |
EN 1034-26:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 26: Roll packaging machines |
24.8.2012 |
|
|
|
CEN |
EN 1034-27:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 27: Roll handling systems |
15.11.2012 |
|
|
|
CEN |
EN 1114-1:2011 Plastics and rubber machines — Extruders and extrusion lines — Part 1: Safety requirements for extruders |
29.2.2012 |
|
|
|
CEN |
EN 1114-3:2001+A1:2008 Plastics and rubber machines — Extruders and extrusion lines — Part 3: Safety requirements for haul-offs |
8.9.2009 |
|
|
|
CEN |
EN 1175-1:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 1: General requirements for battery powered trucks |
8.4.2011 |
|
|
|
CEN |
EN 1175-2:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 2: General requirements of internal combustion engine powered trucks |
8.4.2011 |
|
|
|
CEN |
EN 1175-3:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
8.4.2011 |
|
|
|
CEN |
EN 1218-1:1999+A1:2009 Safety of woodworking machines — Tenoning machines — Part 1: Single end tenoning machines with sliding table |
18.12.2009 |
|
|
|
CEN |
EN 1218-2:2004+A1:2009 Safety of woodworking machines — Tenoning machines — Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
8.9.2009 |
|
|
|
CEN |
EN 1218-3:2001+A1:2009 Safety of woodworking machines — Tenoning machines — Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers |
8.9.2009 |
|
|
|
CEN |
EN 1218-5:2004+A1:2009 Safety of woodworking machines — Tenoning machines — Part 5: One side profiling machines with fixed table and feed rollers or feed chain |
18.12.2009 |
|
|
|
CEN |
EN 1247:2004+A1:2010 Foundry machinery — Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
8.4.2011 |
|
|
|
CEN |
EN 1248:2001+A1:2009 Foundry machinery — Safety requirements for abrasive blasting equipment |
8.9.2009 |
|
|
|
CEN |
EN 1265:1999+A1:2008 Safety of machinery — Noise test code for foundry machines and equipment |
8.9.2009 |
|
|
|
CEN |
EN 1374:2000+A1:2010 Agricultural machinery — Silos stationary unloaders for round silos — Safety |
20.10.2010 |
|
|
|
CEN |
EN 1398:2009 Dock levellers — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1417:2014 Plastics and rubber machines — Two-roll mills — Safety requirements |
15.1.2016 |
EN 1417:1996+A1:2008 Note 2.1 |
31.12.2016 |
|
CEN |
EN 1459-1:2017 Rough-terrain trucks — Safety requirements and verification — Part 1: Variable-reach trucks |
This is the first publication |
EN 1459:1998+A3:2012 Note 2.1 |
30.9.2018 |
|
CEN |
EN 1459-2:2015 Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing variable-reach trucks |
15.1.2016 |
|
|
|
CEN |
EN 1492-1:2000+A1:2008 Textile slings — Safety — Part 1: Flat woven webbing slings made of man-made fibres for general purpose use |
8.9.2009 |
|
|
|
CEN |
EN 1492-2:2000+A1:2008 Textile slings — Safety — Part 2: Roundslings made of man-made fibres for general purpose use |
8.9.2009 |
|
|
|
CEN |
EN 1492-4:2004+A1:2008 Textile slings — Safety — Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
8.9.2009 |
|
|
|
CEN |
EN 1493:2010 Vehicle lifts |
8.4.2011 |
EN 1493:1998+A1:2008 Note 2.1 |
4.8.2011 |
|
CEN |
EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment |
8.9.2009 |
|
|
|
CEN |
EN 1495:1997+A2:2009 Lifting platforms — Mast climbing work platforms |
18.12.2009 |
|
|
|
|
EN 1495:1997+A2:2009/AC:2010 |
|
|
|
|
Warning: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC. |
||||
|
CEN |
EN 1501-1:2011+A1:2015 Refuse collection vehicles — General requirements and safety requirements — Part 1: Rear loaded refuse collection vehicles |
15.1.2016 |
EN 1501-1:2011 Note 2.1 |
29.2.2016 |
|
CEN |
EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices — General requirements and safety requirements — Part 2: Side loaded refuse collection vehicles |
29.12.2009 |
|
|
|
CEN |
EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 3: Front loaded refuse collection vehicles |
8.9.2009 |
|
|
|
CEN |
EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 4: Noise test code for refuse collection vehicles |
8.9.2009 |
|
|
|
CEN |
EN 1501-5:2011 Refuse collection vehicles — General requirements and safety requirements — Part 5: Lifting devices for refuse collection vehicles |
18.11.2011 |
EN 1501-1:1998+A2:2009 Note 2.1 |
29.2.2012 |
|
CEN |
EN 1526:1997+A1:2008 Safety of industrial trucks — Additional requirements for automated functions on trucks |
8.9.2009 |
|
|
|
CEN |
EN 1539:2015 Dryers and ovens, in which flammable substances are released — Safety requirements |
13.5.2016 |
EN 1539:2009 Note 2.1 |
30.4.2016 |
|
CEN |
EN 1547:2001+A1:2009 Industrial thermoprocessing equipment — Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
8.9.2009 |
|
|
|
CEN |
EN 1550:1997+A1:2008 Machine-tools safety — Safety requirements for the design and construction of work holding chucks |
8.9.2009 |
|
|
|
CEN |
EN 1554:2012 Conveyor belts — Drum friction testing |
24.8.2012 |
|
|
|
CEN |
EN 1570-1:2011+A1:2014 Safety requirements for lifting tables — Part 1: Lifting tables serving up to two fixed landings |
13.5.2016 |
EN 1570-1:2011 Note 2.1 |
The date of this publication |
|
CEN |
EN 1570-2:2016 Safety requirements for lifting tables — Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
9.6.2017 |
|
|
|
CEN |
EN 1612-1:1997+A1:2008 Plastics and rubber machines — Reaction moulding machines — Part 1: Safety requirements for metering and mixing units |
8.9.2009 |
|
|
|
CEN |
EN 1672-2:2005+A1:2009 Food processing machinery — Basic concepts — Part 2: Hygiene requirements |
8.9.2009 |
|
|
|
CEN |
EN 1673:2000+A1:2009 Food processing machinery — Rotary rack ovens — Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 1674:2015 Food processing machinery — Dough sheeters — Safety and hygiene requirements |
15.1.2016 |
EN 1674:2000+A1:2009 Note 2.1 |
31.3.2016 |
|
CEN |
EN 1677-1:2000+A1:2008 Components for slings — Safety — Part 1: Forged steel components, Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-2:2000+A1:2008 Components for slings — Safety — Part 2: Forged steel lifting hooks with latch, Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-3:2001+A1:2008 Components for slings — Safety — Part 3: Forged steel self-locking hooks — Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-4:2000+A1:2008 Components for slings — Safety — Part 4: Links, Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-5:2001+A1:2008 Components for slings — Safety — Part 5: Forged steel lifting hooks with latch — Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 1677-6:2001+A1:2008 Components for slings — Safety — Part 6: Links — Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 1678:1998+A1:2010 Food processing machinery — Vegetable cutting machines — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 1679-1:1998+A1:2011 Reciprocating internal combustion engines — Safety — Part 1: Compression ignition engines |
20.7.2011 |
|
|
|
CEN |
EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines |
8.9.2009 |
|
|
|
|
EN 1710:2005+A1:2008/AC:2010 |
|
|
|
|
CEN |
EN 1755:2000+A2:2013 Safety of industrial trucks — Operation in potentially explosive atmospheres — Use in flammable gas, vapour, mist and dust |
28.11.2013 |
EN 1755:2000+A1:2009 Note 2.1 |
28.11.2013 |
|
CEN |
EN 1756-1:2001+A1:2008 Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 1: Tail lifts for goods |
8.9.2009 |
|
|
|
CEN |
EN 1756-2:2004+A1:2009 Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 2: Tail lifts for passengers |
18.12.2009 |
|
|
|
CEN |
EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services — Safety requirements and testing |
26.5.2010 |
EN 1777:2004+A1:2009 Note 2.1 |
30.9.2010 |
|
CEN |
EN 1804-1:2001+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 1: Support units and general requirements |
26.5.2010 |
|
|
|
CEN |
EN 1804-2:2001+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 2: Power set legs and rams |
26.5.2010 |
|
|
|
CEN |
EN 1804-3:2006+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 3: Hydraulic control systems |
26.5.2010 |
|
|
|
CEN |
EN 1807-1:2013 Safety of woodworking machines — Band sawing machines — Part 1: Table band saws and band re-saws |
28.11.2013 |
EN 1807:1999+A1:2009 Note 2.1 |
28.11.2013 |
|
CEN |
EN 1807-2:2013 Safety of woodworking machines — Band sawing machines — Part 2: Log sawing machines |
28.11.2013 |
EN 1807:1999+A1:2009 Note 2.1 |
28.11.2013 |
|
CEN |
EN 1808:2015 Safety requirements for suspended access equipment — Design calculations, stability criteria, construction — Examinations and tests |
13.5.2016 |
EN 1808:1999+A1:2010 Note 2.1 |
13.5.2016 |
|
CEN |
EN 1829-1:2010 High pressure water jet machines — Safety requirements — Part 1: Machines |
26.5.2010 |
|
|
|
CEN |
EN 1829-2:2008 High-pressure water jet machines — Safety requirements — Part 2: Hoses, hose lines and connectors |
8.9.2009 |
|
|
|
|
EN 1829-2:2008/AC:2011 |
|
|
|
|
CEN |
EN 1845:2007 Footwear manufacturing machines — Footwear moulding machines — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1846-2:2009+A1:2013 Firefighting and rescue service vehicles — Part 2: Common requirements — Safety and performance |
28.11.2013 |
EN 1846-2:2009 Note 2.1 |
28.11.2013 |
|
CEN |
EN 1846-3:2013 Firefighting and rescue service vehicles — Part 3: Permanently installed equipment — Safety and performance |
28.11.2013 |
EN 1846-3:2002+A1:2008 Note 2.1 |
31.1.2014 |
|
CEN |
EN 1853:1999+A1:2009 Agricultural machinery — Trailers with tipping body — Safety |
18.12.2009 |
|
|
|
CEN |
EN 1870-3:2001+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
8.9.2009 |
|
|
|
CEN |
EN 1870-4:2012 Safety of woodworking machines — Circular sawing machines — Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
5.6.2012 |
EN 1870-4:2001+A1:2009 Note 2.1 |
30.9.2012 |
|
CEN |
EN 1870-5:2002+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 5: Circular sawbenches/up-cutting cross-cut sawing machines |
15.11.2012 |
EN 1870-5:2002+A1:2009 Note 2.1 |
31.3.2013 |
|
CEN |
EN 1870-6:2002+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading |
18.12.2009 |
|
|
|
CEN |
EN 1870-7:2012 Safety of woodworking machines — Circular sawing machines — Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
5.4.2013 |
EN 1870-7:2002+A1:2009 Note 2.1 |
30.4.2013 |
|
CEN |
EN 1870-8:2012 Safety of woodworking machines — Circular sawing machines — Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
5.4.2013 |
EN 1870-8:2001+A1:2009 Note 2.1 |
31.5.2013 |
|
CEN |
EN 1870-9:2012 Safety of woodworking machines — Circular sawing machines — Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
15.11.2012 |
EN 1870-9:2000+A1:2009 Note 2.1 |
31.3.2013 |
|
CEN |
EN 1870-10:2013 Safety of woodworking machines — Circular sawing machines — Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
28.11.2013 |
EN 1870-10:2003+A1:2009 Note 2.1 |
30.11.2013 |
|
CEN |
EN 1870-11:2013 Safety of woodworking machines — Circular sawing machines — Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
11.4.2014 |
EN 1870-11:2003+A1:2009 Note 2.1 |
30.4.2014 |
|
CEN |
EN 1870-12:2013 Safety of woodworking machines — Circular sawing machines — Part 12: Pendulum cross-cut sawing machines |
11.4.2014 |
EN 1870-12:2003+A1:2009 Note 2.1 |
30.4.2014 |
|
CEN |
EN 1870-13:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 13: Horizontal beam panel sawing machines |
5.6.2012 |
EN 1870-13:2007+A1:2009 Note 2.1 |
30.9.2012 |
|
CEN |
EN 1870-14:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines |
5.6.2012 |
EN 1870-14:2007+A1:2009 Note 2.1 |
30.9.2012 |
|
CEN |
EN 1870-15:2012 Safety of woodworking machines — Circular sawing machines — Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
5.4.2013 |
EN 1870-15:2004+A1:2009 Note 2.1 |
30.4.2013 |
|
CEN |
EN 1870-16:2012 Safety of woodworking machines — Circular sawing machines — Part 16: Double mitre sawing machines for V cutting |
5.4.2013 |
EN 1870-16:2005+A1:2009 Note 2.1 |
30.4.2013 |
|
CEN |
EN 1870-17:2012+A1:2015 Safety of woodworking machines — Circular sawing machines — Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
13.5.2016 |
EN 1870-17:2012 Note 2.1 |
The date of this publication |
|
CEN |
EN 1870-19:2013 Safety of woodworking machines — Circular sawing machines — Part 19: Circular saw benches (with and without sliding table) and building site saws |
11.4.2014 |
EN 1870-1:2007+A1:2009 Note 2.1 |
31.5.2014 |
|
CEN |
EN 1889-1:2011 Machines for underground mines — Mobile machines working underground — Safety — Part 1: Rubber tyred vehicles |
18.11.2011 |
|
|
|
CEN |
EN 1889-2:2003+A1:2009 Machines for underground mines — Mobile machines working underground — Safety — Part 2: Rail locomotives |
8.9.2009 |
|
|
|
CEN |
EN 1915-1:2013 Aircraft ground support equipment — General requirements — Part 1: Basic safety requirements |
28.11.2013 |
EN 1915-1:2001+A1:2009 Note 2.1 |
28.11.2013 |
|
CEN |
EN 1915-2:2001+A1:2009 Aircraft ground support equipment — General requirements — Part 2: Stability and strength requirements, calculations and test methods |
8.9.2009 |
|
|
|
CEN |
EN 1915-3:2004+A1:2009 Aircraft ground support equipment — General requirements — Part 3: Vibration measurement methods and reduction |
8.9.2009 |
|
|
|
CEN |
EN 1915-4:2004+A1:2009 Aircraft ground support equipment — General requirements — Part 4: Noise measurement methods and reduction |
8.9.2009 |
|
|
|
CEN |
EN 1953:2013 Atomising and spraying equipment for coating materials — Safety requirements |
28.11.2013 |
EN 1953:1998+A1:2009 Note 2.1 |
31.3.2014 |
|
CEN |
EN 1974:1998+A1:2009 Food processing machinery — Slicing machines — Safety and hygiene requirements |
18.12.2009 |
|
|
|
CEN |
EN ISO 2151:2008 Acoustics — Noise test code for compressors and vacuum pumps — Engineering method (Grade 2) (ISO 2151:2004) |
8.9.2009 |
|
|
|
CEN |
EN ISO 2860:2008 Earth-moving machinery — Minimum access dimensions (ISO 2860:1992) |
8.9.2009 |
|
|
|
CEN |
EN ISO 2867:2011 Earth-moving machinery — Access systems (ISO 2867:2011) |
18.11.2011 |
EN ISO 2867:2008 Note 2.1 |
31.7.2014 |
|
CEN |
EN ISO 3164:2013 Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume (ISO 3164:2013) |
28.11.2013 |
EN ISO 3164:2008 Note 2.1 |
30.11.2013 |
|
CEN |
EN ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010) |
20.10.2010 |
|
|
|
|
EN ISO 3266:2010/A1:2015 |
13.5.2016 |
Note 3 |
30.6.2016 |
|
CEN |
EN ISO 3411:2007 Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3449:2008 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements (ISO 3449:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3450:2011 Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems (ISO 3450:2011) |
29.2.2012 |
EN ISO 3450:2008 Note 2.1 |
31.5.2012 |
|
CEN |
EN ISO 3457:2008 Earth-moving machinery — Guards — Definitions and requirements (ISO 3457:2003) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements (ISO 3471:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3691-1:2015 Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) |
15.1.2016 |
EN ISO 3691-1:2012 Note 2.1 |
31.1.2016 |
|
|
EN ISO 3691-1:2015/AC:2016 |
|
|
|
|
CEN |
EN ISO 3691-5:2014 Industrial trucks — Safety requirements and verification — Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) |
11.7.2014 |
EN ISO 3691-5:2009 Note 2.1 |
31.8.2014 |
|
|
EN ISO 3691-5:2014/AC:2014 |
|
|
|
|
CEN |
EN ISO 3691-6:2015 Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers (ISO 3691-6:2013) |
13.5.2016 |
EN ISO 3691-6:2013 Note 2.1 |
13.5.2016 |
|
|
EN ISO 3691-6:2015/AC:2016 |
|
|
|
|
CEN |
EN ISO 4254-1:2015 Agricultural machinery — Safety — Part 1: General requirements (ISO 4254-1:2013) |
13.5.2016 |
EN ISO 4254-1:2013 Note 2.1 |
13.5.2016 |
|
CEN |
EN ISO 4254-5:2009 Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008) |
26.5.2010 |
|
|
|
|
EN ISO 4254-5:2009/AC:2011 |
|
|
|
|
CEN |
EN ISO 4254-6:2009 Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009) |
26.5.2010 |
|
|
|
|
EN ISO 4254-6:2009/AC:2010 |
|
|
|
|
CEN |
EN ISO 4254-7:2009 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) |
26.5.2010 |
|
|
|
|
EN ISO 4254-7:2009/AC:2010 |
|
|
|
|
CEN |
EN ISO 4254-10:2009 Agricultural machinery — Safety — Part 10: Rotary tedders and rakes (ISO 4254-10:2009) |
26.5.2010 |
|
|
|
|
EN ISO 4254-10:2009/AC:2010 |
|
|
|
|
CEN |
EN ISO 4254-11:2010 Agricultural machinery — Safety — Part 11: Pick-up balers (ISO 4254-11:2010) |
8.4.2011 |
EN 704:1999+A1:2009 Note 2.1 |
30.6.2011 |
|
CEN |
EN ISO 4254-12:2012 Agricultural machinery — Safety — Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012) |
24.8.2012 |
EN 745:1999+A1:2009 Note 2.1 |
31.12.2012 |
|
|
EN ISO 4254-12:2012/A1:2017 |
This is the first publication |
Note 3 |
30.6.2018 |
|
CEN |
EN ISO 4254-14:2016 Agricultural machinery — Safety — Part 14: Bale wrappers (ISO 4254-14:2016) |
9.9.2016 |
|
|
|
CEN |
EN ISO 5395-1:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013) |
28.11.2013 |
EN 836:1997+A4:2011 Note 2.1 |
30.9.2014 |
|
CEN |
EN ISO 5395-2:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013) |
28.11.2013 |
EN 836:1997+A4:2011 Note 2.1 |
30.9.2014 |
|
|
EN ISO 5395-2:2013/A1:2016 |
9.6.2017 |
Note 3 |
30.6.2017 |
|
|
EN ISO 5395-2:2013/A2:2017 |
This is the first publication |
Note 3 |
30.6.2018 |
|
CEN |
EN ISO 5395-3:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) |
28.11.2013 |
EN 836:1997+A4:2011 Note 2.1 |
30.9.2014 |
|
|
EN ISO 5395-3:2013/A1:2017 |
9.6.2017 |
Note 3 |
31.8.2017 |
|
CEN |
EN ISO 5674:2009 Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) |
8.9.2009 |
|
|
|
CEN |
EN ISO 6682:2008 Earth-moving machinery — Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
8.9.2009 |
|
|
|
CEN |
EN ISO 6683:2008 Earth-moving machinery — Seat belts and seat belt anchorages — Performance requirements and tests (ISO 6683:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 7096:2008 Earth-moving machinery — Laboratory evaluation of operator seat vibration (ISO 7096:2000) |
8.9.2009 |
|
|
|
|
EN ISO 7096:2008/AC:2009 |
|
|
|
|
CEN |
EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines — Part 1: Common safety requirements (ISO 8230-1:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 8230-2:2008 Safety requirements for dry-cleaning machines — Part 2: Machines using perchloroethylene (ISO 8230-2:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines — Part 3: Machines using combustible solvents (ISO 8230-3:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15) |
9.9.2016 |
EN 12601:2010 Note 2.1 |
30.6.2017 |
|
CEN |
EN ISO 9902-1:2001 Textile machinery — Noise test code — Part 1: Common requirements (ISO 9902-1:2001) |
18.12.2009 |
|
|
|
|
EN ISO 9902-1:2001/A1:2009 |
18.12.2009 |
Note 3 |
28.12.2009 |
|
|
EN ISO 9902-1:2001/A2:2014 |
15.1.2016 |
Note 3 |
29.2.2016 |
|
CEN |
EN ISO 9902-2:2001 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) |
18.12.2009 |
|
|
|
|
EN ISO 9902-2:2001/A1:2009 |
18.12.2009 |
Note 3 |
28.12.2009 |
|
|
EN ISO 9902-2:2001/A2:2014 |
13.2.2015 |
Note 3 |
13.2.2015 |
|
CEN |
EN ISO 9902-3:2001 Textile machinery — Noise test code — Part 3: Nonwoven machinery (ISO 9902-3:2001) |
18.12.2009 |
|
|
|
|
EN ISO 9902-3:2001/A1:2009 |
18.12.2009 |
Note 3 |
28.12.2009 |
|
|
EN ISO 9902-3:2001/A2:2014 |
13.2.2015 |
Note 3 |
13.2.2015 |
|
CEN |
EN ISO 9902-4:2001 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001) |
18.12.2009 |
|
|
|
|
EN ISO 9902-4:2001/A1:2009 |
18.12.2009 |
Note 3 |
28.12.2009 |
|
|
EN ISO 9902-4:2001/A2:2014 |
13.2.2015 |
Note 3 |
13.2.2015 |
|
CEN |
EN ISO 9902-5:2001 Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) |
18.12.2009 |
|
|
|
|
EN ISO 9902-5:2001/A1:2009 |
18.12.2009 |
Note 3 |
28.12.2009 |
|
|
EN ISO 9902-5:2001/A2:2014 |
13.2.2015 |
Note 3 |
13.2.2015 |
|
CEN |
EN ISO 9902-6:2001 Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) |
18.12.2009 |
|
|
|
|
EN ISO 9902-6:2001/A1:2009 |
18.12.2009 |
Note 3 |
28.12.2009 |
|
|
EN ISO 9902-6:2001/A2:2014 |
13.2.2015 |
Note 3 |
13.2.2015 |
|
CEN |
EN ISO 9902-7:2001 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) |
18.12.2009 |
|
|
|
|
EN ISO 9902-7:2001/A1:2009 |
18.12.2009 |
Note 3 |
28.12.2009 |
|
|
EN ISO 9902-7:2001/A2:2014 |
13.2.2015 |
Note 3 |
13.2.2015 |
|
CEN |
EN ISO 10218-1:2011 Robots and robotic devices — Safety requirements for industrial robots — Part 1: Robots (ISO 10218-1:2011) |
18.11.2011 |
EN ISO 10218-1:2008 Note 2.1 |
1.1.2013 |
|
CEN |
EN ISO 10218-2:2011 Robots and robotic devices — Safety requirements for industrial robots — Part 2: Robot systems and integration (ISO 10218-2:2011) |
18.11.2011 |
|
|
|
CEN |
EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery — Part 1: Common requirements (ISO 10472-1:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery — Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery — Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-4:2008 Safety requirements for industrial laundry machinery — Part 4: Air dryers (ISO 10472-4:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery — Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery — Part 6: Ironing and fusing presses (ISO 10472-6:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10517:2009 Powered hand-held hedge trimmers — Safety (ISO 10517:2009) |
18.12.2009 |
|
|
|
|
EN ISO 10517:2009/A1:2013 |
28.11.2013 |
Note 3 |
30.9.2014 |
|
CEN |
EN ISO 10821:2005 Industrial sewing machines — Safety requirements for sewing machines, units and systems (ISO 10821:2005) |
18.12.2009 |
|
|
|
|
EN ISO 10821:2005/A1:2009 |
18.12.2009 |
Note 3 |
28.12.2009 |
|
CEN |
EN ISO 11102-1:2009 Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests (ISO 11102-1:1997) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11102-2:2009 Reciprocating internal combustion engines — Handle starting equipment — Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11111-1:2016 Textile machinery — Safety requirements — Part 1: Common requirements (ISO 11111-1:2016) |
9.6.2017 |
|
30.11.2017 |
|
CEN |
EN ISO 11111-2:2005 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) |
18.12.2009 |
|
|
|
|
EN ISO 11111-2:2005/A1:2009 |
18.12.2009 |
Note 3 |
31.1.2010 |
|
|
EN ISO 11111-2:2005/A2:2016 |
9.6.2017 |
Note 3 |
The date of this publication |
|
CEN |
EN ISO 11111-3:2005 Textile machinery — Safety requirements — Part 3: Nonwoven machinery (ISO 11111-3:2005) |
18.12.2009 |
|
|
|
|
EN ISO 11111-3:2005/A1:2009 |
18.12.2009 |
Note 3 |
31.1.2010 |
|
|
EN ISO 11111-3:2005/A2:2016 |
9.6.2017 |
Note 3 |
The date of this publication |
|
CEN |
EN ISO 11111-4:2005 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) |
18.12.2009 |
|
|
|
|
EN ISO 11111-4:2005/A1:2009 |
18.12.2009 |
Note 3 |
31.1.2010 |
|
|
EN ISO 11111-4:2005/A2:2016 |
9.6.2017 |
Note 3 |
The date of this publication |
|
CEN |
EN ISO 11111-5:2005 Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005) |
18.12.2009 |
|
|
|
|
EN ISO 11111-5:2005/A1:2009 |
18.12.2009 |
Note 3 |
31.1.2010 |
|
|
EN ISO 11111-5:2005/A2:2016 |
9.6.2017 |
Note 3 |
The date of this publication |
|
CEN |
EN ISO 11111-6:2005 Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery (ISO 11111-6:2005) |
18.12.2009 |
|
|
|
|
EN ISO 11111-6:2005/A1:2009 |
18.12.2009 |
Note 3 |
31.1.2010 |
|
|
EN ISO 11111-6:2005/A2:2016 |
9.6.2017 |
Note 3 |
The date of this publication |
|
CEN |
EN ISO 11111-7:2005 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery (ISO 11111-7:2005) |
18.12.2009 |
|
|
|
|
EN ISO 11111-7:2005/A1:2009 |
18.12.2009 |
Note 3 |
31.1.2010 |
|
|
EN ISO 11111-7:2005/A2:2016 |
9.6.2017 |
Note 3 |
The date of this publication |
|
CEN |
EN ISO 11145:2016 Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols (ISO 11145:2016) |
9.9.2016 |
EN ISO 11145:2008 Note 2.1 |
30.9.2016 |
|
CEN |
EN ISO 11148-1:2011 Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
24.8.2012 |
EN 792-1:2000+A1:2008 Note 2.1 |
30.6.2012 |
|
CEN |
EN ISO 11148-2:2011 Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011) |
29.2.2012 |
EN 792-2:2000+A1:2008 Note 2.1 |
30.6.2012 |
|
CEN |
EN ISO 11148-3:2012 Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers (ISO 11148-3:2012) |
5.4.2013 |
EN ISO 11148-3:2010 Note 2.1 |
30.6.2013 |
|
CEN |
EN ISO 11148-4:2012 Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) |
5.4.2013 |
EN ISO 11148-4:2010 Note 2.1 |
30.6.2013 |
|
CEN |
EN ISO 11148-5:2011 Hand-held non-electric power tools — Safety requirements — Part 5: Rotary percussive drills (ISO 11148-5:2011) |
29.2.2012 |
EN 792-5:2000+A1:2008 Note 2.1 |
30.6.2012 |
|
CEN |
EN ISO 11148-6:2012 Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) |
5.4.2013 |
EN ISO 11148-6:2010 Note 2.1 |
30.6.2013 |
|
CEN |
EN ISO 11148-7:2012 Hand-held non-electric power tools — Safety requirements — Part 7: Grinders (ISO 11148-7:2012) |
15.11.2012 |
EN 792-7:2001+A1:2008 Note 2.1 |
28.2.2013 |
|
CEN |
EN ISO 11148-8:2011 Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and polishers (ISO 11148-8:2011) |
29.2.2012 |
EN 792-8:2001+A1:2008 Note 2.1 |
30.6.2012 |
|
CEN |
EN ISO 11148-9:2011 Hand-held non-electric power tools — Safety requirements — Part 9: Die grinders (ISO 11148-9:2011) |
29.2.2012 |
EN 792-9:2001+A1:2008 Note 2.1 |
1.6.2012 |
|
CEN |
EN ISO 11148-10:2011 Hand-held non-electric power tools — Safety requirements — Part 10: Compression power tools (ISO 11148-10:2011) |
29.2.2012 |
EN 792-10:2000+A1:2008 Note 2.1 |
30.6.2012 |
|
CEN |
EN ISO 11148-11:2011 Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and shears (ISO 11148-11:2011) |
29.2.2012 |
EN 792-11:2000+A1:2008 Note 2.1 |
30.6.2012 |
|
CEN |
EN ISO 11148-12:2012 Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
5.4.2013 |
EN 792-12:2000+A1:2008 Note 2.1 |
30.6.2013 |
|
CEN |
EN ISO 11252:2013 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation (ISO 11252:2013) |
28.11.2013 |
EN ISO 11252:2008 Note 2.1 |
28.2.2014 |
|
CEN |
EN ISO 11553-1:2008 Safety of machinery — Laser processing machines — Part 1: General safety requirements (ISO 11553-1:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11553-2:2008 Safety of machinery — Laser processing machines — Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11553-3:2013 Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 11554:2017 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) |
This is the first publication |
EN ISO 11554:2008 Note 2.1 |
30.6.2018 |
|
CEN |
EN ISO 11680-1:2011 Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) |
29.2.2012 |
EN ISO 11680-1:2008 Note 2.1 |
30.6.2012 |
|
CEN |
EN ISO 11680-2:2011 Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 2: Machines for use with back-pack power source (ISO 11680-2:2011) |
29.2.2012 |
EN ISO 11680-2:2008 Note 2.1 |
30.6.2012 |
|
CEN |
EN ISO 11681-1:2011 Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service (ISO 11681-1:2011) |
29.2.2012 |
EN ISO 11681-1:2008 Note 2.1 |
30.6.2012 |
|
CEN |
EN ISO 11681-2:2011 Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service (ISO 11681-2:2011) |
29.2.2012 |
EN ISO 11681-2:2008 Note 2.1 |
30.6.2012 |
|
|
EN ISO 11681-2:2011/A1:2017 |
This is the first publication |
Note 3 |
30.6.2018 |
|
CEN |
EN ISO 11806-1:2011 Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) |
29.2.2012 |
EN ISO 11806:2008 Note 2.1 |
30.6.2012 |
|
CEN |
EN ISO 11806-2:2011 Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011) |
29.2.2012 |
|
|
|
CEN |
EN ISO 11850:2011 Machinery for forestry — General safety requirements (ISO 11850:2011) |
29.2.2012 |
EN 14861:2004+A1:2009 Note 2.1 |
31.5.2012 |
|
|
EN ISO 11850:2011/A1:2016 |
9.9.2016 |
Note 3 |
31.8.2016 |
|
CEN |
EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar — Safety requirements |
15.11.2012 |
EN 12001:2003+A1:2009 Note 2.1 |
28.2.2013 |
|
CEN |
EN 12012-1:2007+A1:2008 Plastics and rubber machines — Size reduction machines — Part 1: Safety requirements for blade granulators |
8.9.2009 |
|
|
|
CEN |
EN 12012-3:2001+A1:2008 Plastics and rubber machines — Size reduction machines — Part 3: Safety requirements for shredders |
8.9.2009 |
|
|
|
CEN |
EN 12012-4:2006+A1:2008 Plastics and rubber machines — Size reduction machines — Part 4: Safety requirements for agglomerators |
8.9.2009 |
|
|
|
CEN |
EN 12013:2000+A1:2008 Plastics and rubber machines — Internal mixers — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12016:2013 Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity |
28.11.2013 |
EN 12016:2004+A1:2008 Note 2.1 |
28.2.2014 |
|
CEN |
EN 12041:2014 Food processing machinery — Moulders — Safety and hygiene requirements |
15.1.2016 |
EN 12041:2000+A1:2009 Note 2.1 |
29.2.2016 |
|
CEN |
EN 12042:2014 Food processing machinery — Automatic dough dividers — Safety and hygiene requirements |
13.2.2015 |
EN 12042:2005+A1:2010 Note 2.1 |
13.2.2015 |
|
CEN |
EN 12043:2014 Food processing machinery — Intermediate provers — Safety and hygiene requirements |
15.1.2016 |
EN 12043:2000+A1:2010 Note 2.1 |
29.2.2016 |
|
CEN |
EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Cutting and punching machines — Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12053:2001+A1:2008 Safety of industrial trucks — Test methods for measuring noise emissions |
8.9.2009 |
|
|
|
CEN |
EN 12077-2:1998+A1:2008 Cranes safety — Requirements for health and safety — Part 2: Limiting and indicating devices |
8.9.2009 |
|
|
|
CEN |
EN 12110:2014 Tunnelling machines — Air locks — Safety requirements |
13.2.2015 |
EN 12110:2002+A1:2008 Note 2.1 |
13.2.2015 |
|
CEN |
EN 12111:2014 Tunnelling machines — Road headers and continuous miners — Safety requirements |
13.2.2015 |
EN 12111:2002+A1:2009 Note 2.1 |
13.2.2015 |
|
CEN |
EN 12158-1:2000+A1:2010 Builders' hoists for goods — Part 1: Hoists with accessible platforms |
8.4.2011 |
|
|
|
CEN |
EN 12158-2:2000+A1:2010 Builders' hoists for goods — Part 2: Inclined hoists with non-accessible load carrying devices |
8.4.2011 |
|
|
|
CEN |
EN 12159:2012 Builders hoists for persons and materials with vertically guided cages |
5.4.2013 |
EN 12159:2000+A1:2009 Note 2.1 |
31.5.2013 |
|
CEN |
EN 12162:2001+A1:2009 Liquid pumps — Safety requirements — Procedure for hydrostatic testing |
8.9.2009 |
|
|
|
CEN |
EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Shoe and leather presses — Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12267:2003+A1:2010 Food processing machinery — Circular saw machines — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12268:2014 Food processing machinery — Band saw machines — Safety and hygiene requirements |
15.1.2016 |
EN 12268:2003+A1:2010 Note 2.1 |
29.2.2016 |
|
CEN |
EN 12301:2000+A1:2008 Plastics and rubber machines — Calenders — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12312-1:2013 Aircraft ground support equipment — Specific requirements — Part 1: Passenger stairs |
28.11.2013 |
EN 12312-1:2001+A1:2009 Note 2.1 |
28.11.2013 |
|
CEN |
EN 12312-2:2014 Aircraft ground support equipment — Specific requirements — Part 2: Catering vehicles |
13.2.2015 |
EN 12312-2:2002+A1:2009 Note 2.1 |
13.2.2015 |
|
CEN |
EN 12312-3:2017 Aircraft ground support equipment — Specific requirements — Part 3: Conveyor belt vehicles |
9.6.2017 |
EN 12312-3:2003+A1:2009 Note 2.1 |
31.7.2017 |
|
CEN |
EN 12312-4:2014 Aircraft ground support equipment — Specific requirements — Part 4: Passenger boarding bridges |
11.7.2014 |
EN 12312-4:2003+A1:2009 Note 2.1 |
30.9.2014 |
|
CEN |
EN 12312-5:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 5: Aircraft fuelling equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-6:2017 Aircraft ground support equipment — Specific requirements — Part 6: Deicers and de-icing/anti-icing equipment |
9.6.2017 |
EN 12312-6:2004+A1:2009 Note 2.1 |
30.9.2017 |
|
CEN |
EN 12312-7:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 7: Aircraft movement equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-8:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 8: Maintenance stairs and platforms |
8.9.2009 |
|
|
|
CEN |
EN 12312-9:2013 Aircraft ground support equipment — Specific requirements — Part 9: Container/Pallet loaders |
28.11.2013 |
EN 12312-9:2005+A1:2009 Note 2.1 |
28.11.2013 |
|
CEN |
EN 12312-10:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 10: Container/Pallet transfer transporters |
8.9.2009 |
|
|
|
CEN |
EN 12312-12:2017 Aircraft ground support equipment — Specific requirements — Part 12: Potable water service equipment |
This is the first publication |
EN 12312-12:2002+A1:2009 Note 2.1 |
30.6.2018 |
|
CEN |
EN 12312-13:2017 Aircraft ground support equipment — Specific requirements — Part 13: Lavatory service equipment |
This is the first publication |
EN 12312-13:2002+A1:2009 Note 2.1 |
30.6.2018 |
|
CEN |
EN 12312-14:2014 Aircraft ground support equipment — Specific requirements — Part 14: Disabled/incapacitated passenger boarding vehicles |
13.2.2015 |
EN 12312-14:2006+A1:2009 Note 2.1 |
13.2.2015 |
|
CEN |
EN 12312-15:2006+A1:2009 Aircraft ground support equipment — Specific requirements — Part 15: Baggage and equipment tractors |
8.9.2009 |
|
|
|
CEN |
EN 12312-16:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 16: Air start equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-17:2004+A1:2009 Aircraft ground support equipment — Specific requirements — Part 17: Air conditioning equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-18:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 18: Nitrogen or Oxygen units |
8.9.2009 |
|
|
|
CEN |
EN 12312-19:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
8.9.2009 |
|
|
|
CEN |
EN 12312-20:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 20: Electrical ground power units |
8.9.2009 |
|
|
|
CEN |
EN 12321:2003+A1:2009 Underground mining machinery — Specification for the safety requirements of armoured face conveyors |
8.9.2009 |
|
|
|
CEN |
EN 12331:2003+A2:2010 Food processing machinery — Mincing machines — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12348:2000+A1:2009 Core drilling machines on stand — Safety |
8.9.2009 |
|
|
|
CEN |
EN 12355:2003+A1:2010 Food processing machinery — Derinding-, skinning- and membrane removal machines — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12385-1:2002+A1:2008 Steel wire ropes — Safety — Part 1: General requirements |
8.9.2009 |
|
|
|
CEN |
EN 12385-2:2002+A1:2008 Steel wire ropes — Safety — Part 2: Definitions, designation and classification |
8.9.2009 |
|
|
|
CEN |
EN 12385-3:2004+A1:2008 Steel wire ropes — Safety — Part 3: Information for use and maintenance |
8.9.2009 |
|
|
|
CEN |
EN 12385-4:2002+A1:2008 Steel wire ropes — Safety — Part 4: Stranded ropes for general lifting applications |
8.9.2009 |
|
|
|
CEN |
EN 12385-10:2003+A1:2008 Steel wire ropes — Safety — Part 10: Spiral ropes for general structural applications |
8.9.2009 |
|
|
|
CEN |
EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Modular shoe repair equipment — Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12409:2008+A1:2011 Plastics and rubber machines — Thermoforming machines — Safety requirements |
29.2.2012 |
EN 12409:2008 Note 2.1 |
30.4.2012 |
|
CEN |
EN 12417:2001+A2:2009 Machine tools — Safety — Machining centres |
8.9.2009 |
|
|
|
|
EN 12417:2001+A2:2009/AC:2010 |
|
|
|
|
CEN |
EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site — Safety |
8.9.2009 |
|
|
|
CEN |
EN 12463:2004+A1:2011 Food processing machinery — Filling machines and auxiliary machines — Safety and hygiene requirements |
20.7.2011 |
|
|
|
CEN |
EN 12505:2000+A1:2009 Food processing machinery — Centrifugal machines for processing edible oils and fats — Safety and hygiene requirements |
18.12.2009 |
|
|
|
CEN |
EN 12525:2000+A2:2010 Agricultural machinery — Front loaders — Safety |
26.5.2010 |
|
|
|
CEN |
EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Noise test code — Common requirements |
8.9.2009 |
|
|
|
CEN |
EN 12547:2014 Centrifuges — Common safety requirements |
15.1.2016 |
EN 12547:1999+A1:2009 Note 2.1 |
29.2.2016 |
|
CEN |
EN 12549:1999+A1:2008 Acoustics — Noise test code for fastener driving tools — Engineering method |
8.9.2009 |
|
|
|
CEN |
EN 12581:2005+A1:2010 Coating plants — Machinery for dip coating and electrodeposition of organic liquid coating material — Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure — Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12622:2009+A1:2013 Safety of machine tools — Hydraulic press brakes |
11.4.2014 |
EN 12622:2009 Note 2.1 |
30.4.2014 |
|
CEN |
EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 1: Common requirements |
8.4.2011 |
|
|
|
CEN |
EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 2: Block making machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 3: Slide and turntable machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 4: Concrete roof tile making machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-1: Pipe making machines manufacturing in the vertical axis |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-2:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-2: Pipe making machines manufacturing in the horizontal axis |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-3: Pipe prestressing machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-4: Concrete pipe coating machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
8.4.2011 |
|
|
|
CEN |
EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
8.4.2011 |
|
|
|
CEN |
EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) |
8.4.2011 |
|
|
|
CEN |
EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates — Installation and use |
8.9.2009 |
|
|
|
Warning: With regard to paragraph 5.1 and Annex D, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.1.2, 1.1.6, 1.2.1, 1.3.7, 1.3.8.2, 1.4.1, 1.4.3 and 1.5.14 of Annex I to Directive 2006/42/EC. |
||||
|
CEN |
EN 12643:2014 Earth-moving machinery — Rubber-tyred machines — Steering requirements (ISO 5010:1992 modified) |
11.7.2014 |
EN 12643:1997+A1:2008 Note 2.1 |
31.8.2014 |
|
CEN |
EN 12644-1:2001+A1:2008 Cranes — Information for use and testing — Part 1: Instructions |
8.9.2009 |
|
|
|
CEN |
EN 12644-2:2000+A1:2008 Cranes — Information for use and testing — Part 2: Marking |
8.9.2009 |
|
|
|
CEN |
EN 12649:2008+A1:2011 Concrete compactors and smoothing machines — Safety |
18.11.2011 |
EN 12649:2008 Note 2.1 |
31.1.2012 |
|
CEN |
EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines — Nailing machines — Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12693:2008 Refrigerating systems and heat pumps — Safety and environmental requirements — Positive displacement refrigerant compressors |
8.9.2009 |
|
|
|
CEN |
EN 12717:2001+A1:2009 Safety of machine tools — Drilling machines |
8.9.2009 |
|
|
|
CEN |
EN 12733:2001+A1:2009 Agricultural and forestry machinery — Pedestrian controlled motor mowers — Safety |
8.9.2009 |
|
|
|
CEN |
EN 12750:2013 Safety of woodworking machines — Four sided moulding machines |
28.11.2013 |
EN 12750:2001+A1:2009 Note 2.1 |
28.11.2013 |
|
CEN |
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment — Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials — Safety requirements — Part 1: Mixing machinery for use in vehicle refinishing |
20.10.2010 |
|
|
|
CEN |
EN 12779:2015 Safety of woodworking machines — Chip and dust extraction systems with fixed installation — Safety requirements |
13.5.2016 |
EN 12779:2004+A1:2009 Note 2.1 |
31.5.2016 |
|
CEN |
EN 12852:2001+A1:2010 Food processing machinery — Food processors and blenders — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12853:2001+A1:2010 Food processing machinery — Hand-held blenders and whisks — Safety and hygiene requirements |
20.10.2010 |
|
|
|
|
EN 12853:2001+A1:2010/AC:2010 |
|
|
|
|
CEN |
EN 12854:2003+A1:2010 Food processing machinery — Beam mixers — Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 12855:2003+A1:2010 Food processing machinery — Rotating bowl cutters — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12881-1:2014 Conveyor belts — Fire simulation flammability testing — Part 1: Propane burner tests |
13.2.2015 |
EN 12881-1:2005+A1:2008 Note 2.1 |
13.2.2015 |
|
CEN |
EN 12881-2:2005+A1:2008 Conveyor belts — Fire simulation flammability testing — Part 2: Large scale fire test |
8.9.2009 |
|
|
|
CEN |
EN 12882:2015 Conveyor belts for general purpose use — Electrical and flammability safety requirements |
15.1.2016 |
EN 12882:2008 Note 2.1 |
29.2.2016 |
|
CEN |
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours — Part 1: Common safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12921-2:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours — Part 2: Safety of machines using water based cleaning liquids |
8.9.2009 |
|
|
|
CEN |
EN 12921-3:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours — Part 3: Safety of machines using flammable cleaning liquids |
8.9.2009 |
|
|
|
CEN |
EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours — Part 4: Safety of machines using halogenated solvents |
8.9.2009 |
|
|
|
CEN |
EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry — Power take-off (PTO) drive shafts and their guards — Safety |
18.12.2009 |
|
|
|
CEN |
EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates — Safety devices for power operated doors and gates — Requirements and test methods |
18.12.2009 |
|
|
|
CEN |
EN 12981:2005+A1:2009 Coating plants — Spray booths for application of organic powder coating material — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12984:2005+A1:2010 Food processing machinery — Portable and/or hand-guided machines and appliances with mechanically driven cutting tools — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12999:2011+A1:2012 Cranes — Loader cranes |
24.8.2012 |
EN 12999:2011 Note 2.1 |
31.12.2012 |
|
CEN |
EN 13000:2010+A1:2014 Cranes — Mobile cranes |
13.2.2015 |
EN 13000:2010 Note 2.1 |
13.2.2015 |
|
CEN |
EN 13001-1:2015 Cranes — General design — Part 1: General principles and requirements |
15.1.2016 |
EN 13001-1:2004+A1:2009 Note 2.1 |
29.2.2016 |
|
CEN |
EN 13001-2:2014 Crane safety — General design — Part 2: Load actions |
15.1.2016 |
EN 13001-2:2011 Note 2.1 |
29.2.2016 |
|
CEN |
EN 13001-3-1:2012+A1:2013 Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure |
28.11.2013 |
EN 13001-3-1:2012 Note 2.1 |
31.1.2014 |
|
CEN |
EN 13001-3-2:2014 Cranes — General design — Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
15.1.2016 |
|
|
|
CEN |
EN 13001-3-3:2014 Cranes — General design — Part 3-3: Limit states and proof of competence of wheel/rail contacts |
15.1.2016 |
|
|
|
CEN |
EN 13001-3-5:2016 Cranes — General design — Part 3-5: Limit states and proof of competence of forged hooks |
9.6.2017 |
|
|
|
CEN |
EN 13015:2001+A1:2008 Maintenance for lifts and escalators — Rules for maintenance instructions |
8.9.2009 |
|
|
|
CEN |
EN 13019:2001+A1:2008 Machines for road surface cleaning — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13020:2015 Road surface treatment machines — Safety requirements |
13.5.2016 |
EN 13020:2004+A1:2010 Note 2.1 |
31.5.2016 |
|
CEN |
EN 13021:2003+A1:2008 Winter service machines — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment — Accuracy grades 2 and 3 |
26.5.2010 |
|
|
|
CEN |
EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 1: Storage, handling and transportation equipment inside the factory |
8.9.2009 |
|
|
|
CEN |
EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 2: Storage, handling and transportation equipment outside the factory |
8.9.2009 |
|
|
|
CEN |
EN 13035-3:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 3: Cutting machines |
18.12.2009 |
|
|
|
|
EN 13035-3:2003+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 4: Tilting tables |
26.5.2010 |
|
|
|
CEN |
EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 5: Machines and installations for stacking and de-stacking |
26.5.2010 |
|
|
|
CEN |
EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 6: Machines for break-out |
26.5.2010 |
|
|
|
CEN |
EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 7: Cutting machines for laminated glass |
26.5.2010 |
|
|
|
CEN |
EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 9: Washing installations |
26.5.2010 |
|
|
|
CEN |
EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 11: Drilling machines |
26.5.2010 |
|
|
|
CEN |
EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 1: Gob feeder |
18.12.2009 |
|
|
|
CEN |
EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 2: Handling machines for feeding |
18.12.2009 |
|
|
|
CEN |
EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 3: IS machines |
18.12.2009 |
|
|
|
CEN |
EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 5: Presses |
18.12.2009 |
|
|
|
CEN |
EN 13059:2002+A1:2008 Safety of industrial trucks — Test methods for measuring vibration |
8.9.2009 |
|
|
|
CEN |
EN 13102:2005+A1:2008 Ceramic machines — Safety — Loading and unloading of fine clay tiles |
8.9.2009 |
|
|
|
CEN |
EN 13112:2002+A1:2009 Tannery machines — Splitting and bandknife shearing machines — Safety requirements |
26.5.2010 |
|
|
|
CEN |
EN 13113:2002+A1:2010 Tannery machines — Roller coating machines — Safety requirements |
8.4.2011 |
|
|
|
CEN |
EN 13114:2002+A1:2009 Tannery machines — Rotating process vessels — Safety requirements |
26.5.2010 |
|
|
|
CEN |
EN 13118:2000+A1:2009 Agricultural machinery — Potato harvesting equipment — Safety |
18.12.2009 |
|
|
|
CEN |
EN 13120:2009+A1:2014 Internal blinds — Performance requirements including safety |
11.7.2014 |
EN 13120:2009 Note 2.1 |
31.8.2014 |
|
|
EN 13120:2009+A1:2014/AC:2015 |
|
|
|
|
CEN |
EN 13128:2001+A2:2009 Safety of machine tools — Milling machines (including boring machines) |
8.9.2009 |
|
|
|
|
EN 13128:2001+A2:2009/AC:2010 |
|
|
|
|
CEN |
EN 13135:2013 Cranes — Safety — Design — Requirements for equipment |
28.11.2013 |
EN 13135-1:2003+A1:2010 EN 13135-2:2004+A1:2010 Note 2.1 |
28.11.2013 |
|
CEN |
EN 13140:2000+A1:2009 Agricultural machinery — Sugar beet and fodder beet harvesting equipment — Safety |
18.12.2009 |
|
|
|
CEN |
EN 13155:2003+A2:2009 Cranes — Safety — Non-fixed load lifting attachments |
8.9.2009 |
|
|
|
CEN |
EN 13157:2004+A1:2009 Cranes — Safety — Hand powered cranes |
18.12.2009 |
|
|
|
CEN |
EN 13204:2016 Double acting hydraulic rescue tools for fire and rescue service use — Safety and performance requirements |
9.6.2017 |
EN 13204:2004+A1:2012 Note 2.1 |
30.11.2017 |
|
CEN |
EN 13208:2003+A1:2010 Food processing machinery — Vegetable peelers — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates — Product standard, performance characteristics |
9.6.2017 |
EN 13241-1:2003+A1:2011 Note 2.1 |
30.6.2018 |
|
CEN |
EN 13288:2005+A1:2009 Food processing machinery — Bowl lifting and tilting machines — Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13289:2001+A1:2013 Pasta processing plants — Dryers and coolers — Safety and hygiene requirements |
28.11.2013 |
|
|
|
CEN |
EN 13355:2004+A1:2009 Coating plants — Combined booths — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13367:2005+A1:2008 Ceramic machines — Safety — Transfer platforms and cars |
8.9.2009 |
|
|
|
|
EN 13367:2005+A1:2008/AC:2009 |
|
|
|
|
CEN |
EN 13378:2001+A1:2013 Pasta processing plants — Pasta presses — Safety and hygiene requirements |
28.11.2013 |
|
|
|
CEN |
EN 13379:2001+A1:2013 Pasta processing plants — Spreader, stripping and cutting machine, stick return conveyor, stick magazine — Safety and hygiene requirements |
28.11.2013 |
|
|
|
CEN |
EN 13389:2005+A1:2009 Food processing machinery — Mixers with horizontal shafts — Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13390:2002+A1:2009 Food processing machinery — Pie and tart machines — Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13411-1:2002+A1:2008 Terminations for steel wire ropes — Safety — Part 1: Thimbles for steel wire rope slings |
8.9.2009 |
|
|
|
CEN |
EN 13411-2:2001+A1:2008 Terminations for steel wire ropes — Safety — Part 2: Splicing of eyes for wire rope slings |
8.9.2009 |
|
|
|
CEN |
EN 13411-3:2004+A1:2008 Terminations for steel wire ropes — Safety — Part 3: Ferrules and ferrule-securing |
8.9.2009 |
|
|
|
CEN |
EN 13411-4:2011 Terminations for steel wire ropes — Safety — Part 4: Metal and resin socketing |
20.7.2011 |
EN 13411-4:2002+A1:2008 Note 2.1 |
30.9.2011 |
|
CEN |
EN 13411-5:2003+A1:2008 Terminations for steel wire ropes — Safety — Part 5: U-bolt wire rope grips |
8.9.2009 |
|
|
|
CEN |
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes — Safety — Part 6: Asymmetric wedge socket |
8.9.2009 |
|
|
|
CEN |
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes — Safety — Part 7: Symmetric wedge socket |
8.9.2009 |
|
|
|
CEN |
EN 13411-8:2011 Terminations for steel wire ropes — Safety — Part 8: Swage terminals and swaging |
18.11.2011 |
|
|
|
CEN |
EN 13414-1:2003+A2:2008 Steel wire rope slings — Safety — Part 1: Slings for general lifting service |
8.9.2009 |
|
|
|
CEN |
EN 13414-2:2003+A2:2008 Steel wire rope slings — Safety — Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
8.9.2009 |
|
|
|
CEN |
EN 13414-3:2003+A1:2008 Steel wire rope slings — Safety — Part 3: Grommets and cable-laid slings |
8.9.2009 |
|
|
|
CEN |
EN 13418:2013 Plastics and rubber machines — Winding machines for film or sheet — Safety requirements |
28.11.2013 |
EN 13418:2004+A1:2008 Note 2.1 |
30.11.2013 |
|
CEN |
EN 13448:2001+A1:2009 Agricultural and forestry machinery — Inter-row mowing units — Safety |
18.12.2009 |
|
|
|
CEN |
EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines — Splitting, skiving, cutting, cementing and cement drying machines — Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN ISO 13482:2014 Robots and robotic devices — Safety requirements for personal care robots (ISO 13482:2014) |
11.7.2014 |
|
|
|
CEN |
EN 13524:2003+A2:2014 Highway maintenance machines — Safety requirements |
11.7.2014 |
EN 13524:2003+A1:2009 Note 2.1 |
31.8.2014 |
|
CEN |
EN 13531:2001+A1:2008 Earth-moving machinery — Tip-over protection structure (TOPS) for compact excavators — Laboratory tests and performance requirements (ISO 12117:1997 modified) |
8.9.2009 |
|
|
|
CEN |
EN 13534:2006+A1:2010 Food processing machinery — Curing injection machines — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13557:2003+A2:2008 Cranes — Controls and control stations |
8.9.2009 |
|
|
|
CEN |
EN 13561:2015 External blinds and awnings — Performance requirements including safety |
15.1.2016 |
EN 13561:2004+A1:2008 Note 2.1 |
28.2.2017 |
|
|
EN 13561:2015/AC:2016 |
|
|
|
|
CEN |
EN 13570:2005+A1:2010 Food processing machinery — Mixing machines — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13586:2004+A1:2008 Cranes — Access |
8.9.2009 |
|
|
|
CEN |
EN 13591:2005+A1:2009 Food processing machinery — Fixed deck oven loaders — Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13617-1:2012 Petrol filling stations — Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
24.8.2012 |
EN 13617-1:2004+A1:2009 Note 2.1 |
30.11.2012 |
|
CEN |
EN 13621:2004+A1:2010 Food processing machinery — Salad dryers — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13659:2015 Shutters and external venetian blinds — Performance requirements including safety |
15.1.2016 |
EN 13659:2004+A1:2008 Note 2.1 |
28.2.2017 |
|
CEN |
EN 13675:2004+A1:2010 Safety of machinery — Safety requirements for tube forming and rolling mills and their finishing line equipment |
20.10.2010 |
|
|
|
CEN |
EN 13683:2003+A2:2011 Garden equipment — Integrally powered shredders/chippers — Safety |
20.7.2011 |
|
|
|
|
EN 13683:2003+A2:2011/AC:2013 |
|
|
|
|
CEN |
EN 13684:2004+A3:2009 Garden equipment — Pedestrian controlled lawn aerators and scarifiers — Safety |
26.5.2010 |
EN 13684:2004+A2:2009 Note 2.1 |
30.6.2010 |
|
CEN |
EN 13731:2007 Lifting bag systems for fire and rescue service use — Safety and performance requirements |
8.9.2009 |
|
|
|
CEN |
EN 13732:2013 Food processing machinery — Bulk milk coolers on farms — Requirements for performance, safety and hygiene |
28.11.2013 |
EN 13732:2002+A2:2009 Note 2.1 |
31.1.2014 |
|
CEN |
EN 13736:2003+A1:2009 Safety of machine tools — Pneumatic presses |
8.9.2009 |
|
|
|
CEN |
EN 13852-1:2013 Cranes — Offshore cranes — Part 1: General-purpose offshore cranes |
28.11.2013 |
|
|
|
CEN |
EN 13862:2001+A1:2009 Floor cutting-off machines — Safety |
8.9.2009 |
|
|
|
CEN |
EN 13870:2015 Food processing machinery — Portion cutting machines — Safety and hygiene requirements |
15.1.2016 |
EN 13870:2005+A1:2010 Note 2.1 |
31.3.2016 |
|
CEN |
EN 13871:2014 Food processing machinery — Cubes cutting machinery — Safety and hygiene requirements |
15.1.2016 |
EN 13871:2005+A1:2010 Note 2.1 |
29.2.2016 |
|
CEN |
EN 13885:2005+A1:2010 Food processing machinery — Clipping machines — Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13886:2005+A1:2010 Food processing machinery — Cooking kettles equipped with powered stirrer and/or mixer — Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes — Dee shackles and bow shackles — Grade 6 — Safety |
8.9.2009 |
|
|
|
CEN |
EN 13951:2012 Liquid pumps — Safety requirements — Agrifoodstuffs equipment; Design rules to ensure hygiene in use |
24.8.2012 |
EN 13951:2003+A1:2008 Note 2.1 |
31.10.2012 |
|
CEN |
EN 13954:2005+A1:2010 Food processing machinery — Bread slicers — Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13977:2011 Railway applications — Track — Safety requirements for portable machines and trolleys for construction and maintenance |
20.7.2011 |
|
|
|
CEN |
EN 13985:2003+A1:2009 Machine tools — Safety — Guillotine shears |
8.9.2009 |
|
|
|
CEN |
EN 14010:2003+A1:2009 Safety of machinery — Equipment for power driven parking of motor vehicles — Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
18.12.2009 |
|
|
|
CEN |
EN 14017:2005+A2:2009 Agricultural and forestry machinery — Solid fertilizer distributors — Safety |
18.12.2009 |
EN 14017:2005+A1:2008 Note 2.1 |
31.1.2010 |
|
CEN |
EN 14018:2005+A1:2009 Agricultural and forestry machinery — Seed drills — Safety |
18.12.2009 |
|
|
|
CEN |
EN 14033-3:2017 Railway applications — Track — Railbound construction and maintenance machines — Part 3: General safety requirements |
This is the first publication |
EN 14033-3:2009+A1:2011 Note 2.1 |
30.6.2018 |
|
CEN |
EN 14043:2014 High rise aerial appliances for fire and rescue service use — Turntable ladders with combined movements — Safety and performance requirements and test methods |
11.7.2014 |
EN 14043:2005+A1:2009 Note 2.1 |
31.7.2014 |
|
CEN |
EN 14044:2014 High rise aerial appliances for fire and rescue service use — Turntable ladders with sequential movements — Safety and performance requirements and test methods |
11.7.2014 |
EN 14044:2005+A1:2009 Note 2.1 |
31.7.2014 |
|
CEN |
EN 14070:2003+A1:2009 Safety of machine tools — Transfer and special-purpose machines |
8.9.2009 |
|
|
|
|
EN 14070:2003+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 14238:2004+A1:2009 Cranes — Manually controlled load manipulating devices |
18.12.2009 |
|
|
|
CEN |
EN ISO 14314:2009 Reciprocal internal combustion engines — Recoil starting equipment — General safety requirements (ISO 14314:2004) |
18.12.2009 |
|
|
|
CEN |
EN 14439:2006+A2:2009 Cranes — Safety — Tower cranes |
8.9.2009 |
|
|
|
CEN |
EN 14462:2005+A1:2009 Surface treatment equipment — Noise test code for surface treatment equipment including its ancillary handling equipment — Accuracy grades 2 and 3 |
8.9.2009 |
|
|
|
CEN |
EN 14466:2005+A1:2008 Fire-fighting pumps — Portable pumps — Safety and performance requirements, tests |
8.9.2009 |
|
|
|
CEN |
EN 14492-1:2006+A1:2009 Cranes — Power driven winches and hoists — Part 1: Power driven winches |
18.12.2009 |
|
|
|
|
EN 14492-1:2006+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 14492-2:2006+A1:2009 Cranes — Power driven winches and hoists — Part 2: Power driven hoists |
18.12.2009 |
|
|
|
|
EN 14492-2:2006+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 14502-2:2005+A1:2008 Cranes — Equipment for the lifting of persons — Part 2: Elevating control stations |
8.9.2009 |
|
|
|
CEN |
EN 14655:2005+A1:2010 Food processing machinery — Baguette slicers — Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 14656:2006+A1:2010 Safety of machinery — Safety requirements for extrusion presses for steel and non-ferrous metals |
20.10.2010 |
|
|
|
CEN |
EN 14658:2005+A1:2010 Continuous handling equipment and systems — General safety requirements for continuous handling equipment for opencast lignite mining |
26.5.2010 |
|
|
|
CEN |
EN 14673:2006+A1:2010 Safety of machinery — Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
20.10.2010 |
|
|
|
CEN |
EN 14677:2008 Safety of machinery — Secondary steelmaking — Machinery and equipment for treatment of liquid steel |
8.9.2009 |
|
|
|
CEN |
EN 14681:2006+A1:2010 Safety of machinery — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
20.10.2010 |
|
|
|
CEN |
EN 14710-1:2005+A2:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 14710-2:2005+A2:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 2: Verification of general and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 14753:2007 Safety of machinery — Safety requirements for machinery and equipment for continuous casting of steel |
8.9.2009 |
|
|
|
CEN |
EN 14886:2008 Plastics and rubber machines — Bandknife cutting machines for block foams — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 14910:2007+A1:2009 Garden equipment — Walk-behind combustion engine powered trimmers — Safety |
8.9.2009 |
|
|
|
CEN |
EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment — Pedestrian controlled and hand-held machines — Determination of accessibility of hot surfaces |
8.9.2009 |
|
|
|
CEN |
EN 14957:2006+A1:2010 Food processing machinery — Dishwashing machines with conveyor — Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 14958:2006+A1:2009 Food processing machinery — Machinery for grinding and processing flour and semolina — Safety and hygiene requirements |
8.9.2009 |
|
|
|
CEN |
EN 14973:2015 Conveyor belts for use in underground installations — Electrical and flammability safety requirements |
13.5.2016 |
EN 14973:2006+A1:2008 Note 2.1 |
31.5.2016 |
|
CEN |
EN ISO 14982:2009 Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria (ISO 14982:1998) |
8.9.2009 |
|
|
|
CEN |
EN 14985:2012 Cranes — Slewing jib cranes |
23.3.2012 |
|
|
|
CEN |
EN 15000:2008 Safety of industrial trucks — Self propelled variable reach trucks — Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
8.9.2009 |
|
|
|
CEN |
EN 15011:2011+A1:2014 Cranes — Bridge and gantry cranes |
11.7.2014 |
EN 15011:2011 Note 2.1 |
31.8.2014 |
|
CEN |
EN ISO 15012-4:2016 Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: General requirements (ISO 15012-4:2016) |
9.6.2017 |
|
|
|
CEN |
EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site — Safety |
8.9.2009 |
|
|
|
CEN |
EN 15056:2006+A1:2009 Cranes — Requirements for container handling spreaders |
8.9.2009 |
|
|
|
CEN |
EN 15059:2009+A1:2015 Snow grooming equipment — Safety requirements |
15.1.2016 |
EN 15059:2009 Note 2.1 |
29.2.2016 |
|
CEN |
EN 15061:2007+A1:2008 Safety of machinery — Safety requirements for strip processing line machinery and equipment |
8.9.2009 |
|
|
|
CEN |
EN 15067:2007 Plastics and rubber machines — Film converting machines for bags and sacks — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 15093:2008 Safety of Machinery — Safety requirements for hot flat rolling mills |
8.9.2009 |
|
|
|
CEN |
EN 15094:2008 Safety of Machinery — Safety requirements for cold flat rolling mills |
8.9.2009 |
|
|
|
CEN |
EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts — Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 15162:2008 Machines and plants for mining and tooling of natural stone — Safety requirements for gang saws |
8.9.2009 |
|
|
|
CEN |
EN 15163:2008 Machines and installations for the exploitation and processing of natural stone — Safety — Requirements for diamond wire saws |
8.9.2009 |
|
|
|
CEN |
EN 15164:2008 Machines and plants for mining and tooling of natural stone — Safety — Requirements for chain- and belt-slotting machines |
8.9.2009 |
|
|
|
CEN |
EN 15166:2008 Food processing machinery — Automatic back splitting machines of butchery carcasses — Safety and hygiene requirements |
8.9.2009 |
|
|
|
CEN |
EN 15268:2008 Petrol filling stations — Safety requirements for the construction of submersible pump assemblies |
8.9.2009 |
|
|
|
CEN |
EN 15503:2009+A2:2015 Garden equipment — Garden blowers, vacuums and blower/vacuums — Safety |
13.5.2016 |
EN 15503:2009+A1:2013 Note 2.1 |
30.6.2017 |
|
CEN |
EN 15572:2015 Machines and plants for mining and tooling of natural stone — Safety — Requirements for edge finishing machines |
15.1.2016 |
|
|
|
CEN |
EN 15695-1:2017 Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 1: Cab classification, requirements and test procedures |
This is the first publication |
EN 15695-1:2009 Note 2.1 |
30.6.2018 |
|
CEN |
EN 15695-2:2017 Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 2: Filters, requirements and test procedures |
This is the first publication |
EN 15695-2:2009 Note 2.1 |
30.6.2018 |
|
CEN |
EN 15700:2011 Safety for conveyor belts for winter sport or leisure use |
29.2.2012 |
|
|
|
CEN |
EN ISO 15744:2008 Hand-held non-electric power tools — Noise measurement code — Engineering method (grade 2) (ISO 15744:2002) |
8.9.2009 |
|
|
|
CEN |
EN 15746-2:2010+A1:2011 Railway applications — Track — Road-rail machines and associated equipment — Part 2: General safety requirements |
29.2.2012 |
EN 15746-2:2010 Note 2.1 |
30.4.2012 |
|
CEN |
EN 15774:2010 Food processing machinery — Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) — Safety and hygiene requirements |
8.4.2011 |
|
|
|
CEN |
EN 15811:2014 Agricultural machinery — Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified) |
15.1.2016 |
EN 15811:2009 Note 2.1 |
29.2.2016 |
|
CEN |
EN 15830:2012 Rough-terrain variable reach trucks — Visibility — Test methods and verification |
24.8.2012 |
|
|
|
CEN |
EN 15861:2012 Food processing machinery — Smokehouses — Safety and hygiene requirements |
24.8.2012 |
|
|
|
CEN |
EN 15895:2011 Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools |
18.11.2011 |
|
|
|
CEN |
EN 15949:2012 Safety of machinery — Safety requirements for bar mills, structural steel mills and wire rod mills |
5.6.2012 |
|
|
|
CEN |
EN 15954-2:2013 Railway applications — Track — Trailers and associated equipment — Part 2: General safety requirements |
28.11.2013 |
|
|
|
CEN |
EN 15955-2:2013 Railway applications — Track — Demountable machines and associated equipment — Part 2: General safety requirements |
28.11.2013 |
|
|
|
CEN |
EN 15997:2011 All terrain vehicles (ATVs — Quads) — Safety requirements and test methods |
29.2.2012 |
|
|
|
|
EN 15997:2011/AC:2012 |
|
|
|
|
CEN |
EN 16005:2012 Power operated pedestrian doorsets — Safety in use — Requirements and test methods |
5.4.2013 |
|
|
|
|
EN 16005:2012/AC:2015 |
|
|
|
|
CEN |
EN 16029:2012 Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads — Single-track two-wheel motor vehicles — Safety requirements and test methods |
24.8.2012 |
|
|
|
CEN |
EN ISO 16089:2015 Machine tools — Safety — Stationary grinding machines (ISO 16089:2015) |
13.5.2016 |
EN 13218:2002+A1:2008 Note 2.1 |
30.6.2017 |
|
CEN |
EN ISO 16093:2017 Machine tools — Safety — Sawing machines for cold metal (ISO 16093:2017) |
This is the first publication |
EN 13898:2003+A1:2009 Note 2.1 |
30.6.2018 |
|
CEN |
EN ISO 16119-1:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 1: General (ISO 16119-1:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 16119-2:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03) |
28.11.2013 |
|
|
|
CEN |
EN ISO 16119-3:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 16119-4:2014 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014) |
15.1.2016 |
|
|
|
CEN |
EN 16191:2014 Tunnelling machinery — Safety requirements |
13.2.2015 |
EN 815:1996+A2:2008 EN 12336:2005+A1:2008 Note 2.1 |
13.2.2015 |
|
CEN |
EN 16203:2014 Safety of Industrial Trucks — Dynamic tests for verification of lateral stability — Counterbalanced Trucks |
13.2.2015 |
|
|
|
CEN |
EN 16228-1:2014 Drilling and foundation equipment — Safety — Part 1: Common requirements |
13.2.2015 |
EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1 |
13.2.2015 |
|
CEN |
EN 16228-2:2014 Drilling and foundation equipment — Safety — Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining |
13.2.2015 |
EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1 |
13.2.2015 |
|
CEN |
EN 16228-3:2014 Drilling and foundation equipment — Safety — Part 3: Horizontal directional drilling equipment (HDD) |
13.2.2015 |
EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1 |
13.2.2015 |
|
CEN |
EN 16228-4:2014 Drilling and foundation equipment — Safety — Part 4: Foundation equipment |
13.2.2015 |
EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1 |
13.2.2015 |
|
CEN |
EN 16228-5:2014 Drilling and foundation equipment — Safety — Part 5: Diaphragm walling equipment |
13.2.2015 |
EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1 |
13.2.2015 |
|
CEN |
EN 16228-6:2014 Drilling and foundation equipment — Safety — Part 6: Jetting, grouting and injection equipment |
13.2.2015 |
EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1 |
13.2.2015 |
|
CEN |
EN 16228-7:2014 Drilling and foundation equipment — Safety — Part 7: Interchangeable auxiliary equipment |
13.2.2015 |
EN 791:1995+A1:2009 EN 996:1995+A3:2009 Note 2.1 |
13.2.2015 |
|
CEN |
EN 16230-1:2013+A1:2014 Leisure karts — Part 1: Safety requirements and test methods for karts |
15.1.2016 |
EN 16230-1:2013 Note 2.1 |
29.2.2016 |
|
CEN |
EN ISO 16230-1:2015 Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems — Part 1: General requirements (ISO 16230-1:2015) |
15.1.2016 |
|
|
|
CEN |
EN ISO 16231-1:2013 Self-propelled agricultural machinery — Assessment of stability — Part 1: Principles (ISO 16231-1:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 16231-2:2015 Self-propelled agricultural machinery — Assessment of stability — Part 2: Determination of static stability and test procedures (ISO 16231-2:2015) |
15.1.2016 |
|
|
|
CEN |
EN 16246:2012 Agricultural machinery — Backhoes — Safety |
5.4.2013 |
|
|
|
CEN |
EN 16252:2012 Machines for compacting waste materials or recyclable fractions — Horizontal baling presses — Safety requirements |
5.4.2013 |
|
|
|
CEN |
EN 16307-1:2013+A1:2015 Industrial trucks — Safety requirements and verification — Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
15.1.2016 |
EN 16307-1:2013 Note 2.1 |
29.2.2016 |
|
CEN |
EN 16307-5:2013 Industrial trucks — Safety requirements and verification — Part 5: Supplementary requirements for pedestrian-propelled trucks |
11.7.2014 |
|
|
|
CEN |
EN 16307-6:2014 Industrial trucks — Safety requirements and verification — Part 6: Supplementary requirements for burden and personnel carriers |
11.7.2014 |
|
|
|
CEN |
EN 16327:2014 Fire-fighting — Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
11.7.2014 |
|
|
|
CEN |
EN 16474:2015 Plastics and rubber machines — Tyre curing machines — Safety requirements |
15.1.2016 |
|
|
|
CEN |
EN 16486:2014 Machines for compacting waste materials or recyclable fractions — Compactors — Safety requirements |
15.1.2016 |
|
|
|
CEN |
EN 16500:2014 Machines for compacting waste materials or recyclable fractions — Vertical baling presses — Safety requirements |
15.1.2016 |
|
|
|
CEN |
EN 16590-3:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 3: Series development, hardware and software (ISO 25119-3:2010 modified) |
13.2.2015 |
|
|
|
CEN |
EN 16590-4:2014 Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified) |
13.2.2015 |
|
|
|
CEN |
EN 16743:2016 Food processing machinery — Automatic industrial slicing machines — Safety and hygiene requirements |
9.9.2016 |
|
|
|
CEN |
EN 16774:2016 Safety of machinery — Safety requirements for steel converter and associated equipment |
9.9.2016 |
|
|
|
CEN |
EN 16851:2017 Cranes — Light crane systems |
9.6.2017 |
|
|
|
CEN |
EN ISO 17916:2016 Safety of thermal cutting machines (ISO 17916:2016) |
9.9.2016 |
|
|
|
CEN |
EN ISO 18217:2015 Safety of woodworking machines — Edge-banding machines fed by chain(s) (ISO 18217:2015) |
15.1.2016 |
EN 1218-4:2004+A2:2009 Note 2.1 |
31.3.2016 |
|
CEN |
EN ISO 19085-1:2017 Woodworking machines — Safety — Part 1: Common requirements (ISO 19085-1:2017) |
This is the first publication |
|
|
|
CEN |
EN ISO 19085-2:2017 Woodworking machines — Safety — Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017) |
This is the first publication |
|
|
|
CEN |
EN ISO 19085-5:2017 Woodworking machines — Safety — Part 5: Dimension saws (ISO 19085-5:2017) |
This is the first publication |
EN 1870-18:2013 Note 2.1 |
30.6.2018 |
|
CEN |
EN ISO 19432:2012 Building construction machinery and equipment — Portable, hand-held, internal combustion engine driven cut-off machines — Safety requirements (ISO 19432:2012) |
15.11.2012 |
EN ISO 19432:2008 Note 2.1 |
31.1.2013 |
|
CEN |
EN ISO 19932-1:2013 Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements (ISO 19932-1:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 19932-2:2013 Equipment for crop protection — Knapsack sprayers — Part 2: Test methods (ISO 19932-2:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 20361:2015 Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy (ISO 20361:2015) |
9.9.2016 |
EN ISO 20361:2009 Note 2.1 |
31.12.2015 |
|
CEN |
EN ISO 22867:2011 Forestry and gardening machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles (ISO 22867:2011) |
29.2.2012 |
EN ISO 22867:2008 Note 2.1 |
30.6.2012 |
|
CEN |
EN ISO 22868:2011 Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy) (ISO 22868:2011) |
20.7.2011 |
EN ISO 22868:2008 Note 2.1 |
30.9.2011 |
|
CEN |
EN ISO 23125:2015 Machine tools — Safety — Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
15.1.2016 |
EN ISO 23125:2010 Note 2.1 |
29.2.2016 |
|
CEN |
EN ISO 28139:2009 Agricultural and forestry machinery — Knapsack combustion-engine-driven mistblowers — Safety requirements (ISO 28139:2009) |
18.12.2009 |
|
|
|
CEN |
EN ISO 28881:2013 Machine tools — Safety — Electro-discharge machines (ISO 28881:2013) |
28.11.2013 |
EN 12957:2001+A1:2009 Note 2.1 |
28.2.2014 |
|
|
EN ISO 28881:2013/AC:2013 |
|
|
|
|
CEN |
EN ISO 28927-1:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 1: Angle and vertical grinders (ISO 28927-1:2009) |
26.5.2010 |
|
|
|
|
EN ISO 28927-1:2009/A1:2017 |
This is the first publication |
Note 3 |
30.6.2018 |
|
CEN |
EN ISO 28927-2:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-3:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-4:2010 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straight grinders (ISO 28927-4:2010) |
8.4.2011 |
|
|
|
CEN |
EN ISO 28927-5:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 5: Drills and impact drills (ISO 28927-5:2009) |
26.5.2010 |
|
|
|
|
EN ISO 28927-5:2009/A1:2015 |
15.1.2016 |
Note 3 |
31.3.2016 |
|
CEN |
EN ISO 28927-6:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 6: Rammers (ISO 28927-6:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-7:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 7: Nibblers and shears (ISO 28927-7:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-8:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009) |
26.5.2010 |
|
|
|
|
EN ISO 28927-8:2009/A1:2015 |
13.5.2016 |
Note 3 |
30.6.2016 |
|
CEN |
EN ISO 28927-9:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-10:2011 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
18.11.2011 |
|
|
|
CEN |
EN ISO 28927-11:2011 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 11: Stone hammers (ISO 28927-11:2011) |
20.7.2011 |
|
|
|
CEN |
EN ISO 28927-12:2012 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 12: Die grinders (ISO 28927-12:2012) |
5.4.2013 |
|
|
|
B-type standards B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards. |
||||
|
Cenelec |
EN 60204-1:2006 Safety of machinery — Electrical equipment of machines — Part 1: General requirements IEC 60204-1:2005 (Modified) |
26.5.2010 |
|
|
|
|
EN 60204-1:2006/A1:2009 IEC 60204-1:2005/A1:2008 |
26.5.2010 |
Note 3 |
1.2.2012 |
|
|
EN 60204-1:2006/AC:2010 |
|
|
|
|
Cenelec |
EN 60204-11:2000 Safety of machinery — Electrical equipment of machines — Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV IEC 60204-11:2000 |
26.5.2010 |
|
|
|
|
EN 60204-11:2000/AC:2010 |
|
|
|
|
Cenelec |
EN 60204-32:2008 Safety of machinery — Electrical equipment of machines — Part 32: Requirements for hoisting machines IEC 60204-32:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60204-33:2011 Safety of machinery — Electrical equipment of machines — Part 33: Requirements for semiconductor fabrication equipment IEC 60204-33:2009 (Modified) |
18.11.2011 |
|
|
|
Cenelec |
EN 61310-1:2008 Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals IEC 61310-1:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 61310-2:2008 Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking IEC 61310-2:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 61310-3:2008 Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators IEC 61310-3:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 61496-1:2013 Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests IEC 61496-1:2012 |
11.4.2014 |
EN 61496-1:2004 + A1:2008 Note 2.1 |
10.5.2015 |
|
Cenelec |
EN 61800-5-2:2007 Adjustable speed electrical power drive systems — Part 5-2: Safety requirements — Functional IEC 61800-5-2:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 62061:2005 Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems IEC 62061:2005 |
26.5.2010 |
|
|
|
|
EN 62061:2005/A1:2013 IEC 62061:2005/A1:2012 |
28.11.2013 |
Note 3 |
18.12.2015 |
|
|
EN 62061:2005/AC:2010 |
|
|
|
|
|
EN 62061:2005/A2:2015 IEC 62061:2005/A2:2015 |
15.1.2016 |
Note 3 |
31.7.2018 |
|
C-type standards C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer ¿s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard. |
||||
|
Cenelec |
EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material — Safety requirements |
15.1.2016 |
EN 50223:2010 Note 2.1 |
13.4.2018 |
|
Cenelec |
EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material — Safety requirements |
26.5.2010 |
|
|
|
|
EN 50348:2010/AC:2010 |
|
|
|
|
Cenelec |
EN 50434:2014 Safety of household and similar appliances — Particular requirements for mains operated shredders and chippers |
13.2.2015 |
|
|
|
Cenelec |
EN 50569:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors |
11.4.2014 |
|
|
|
Cenelec |
EN 50570:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers |
11.4.2014 |
|
|
|
Cenelec |
EN 50571:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines |
11.4.2014 |
|
|
|
Cenelec |
EN 50580:2012 Safety of hand-held electric motor operated tools — Particular requirements for spray guns |
5.6.2012 |
|
|
|
|
EN 50580:2012/A1:2013 |
28.11.2013 |
Note 3 |
22.7.2016 |
|
Cenelec |
EN 50636-2-91:2014 Household and similar electrical appliances — Safety — Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers IEC 60335-2-91:2008 (Modified) |
13.2.2015 |
|
|
|
Cenelec |
EN 50636-2-92:2014 Household and similar electrical appliances — Safety — Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators IEC 60335-2-92:2002 (Modified) |
13.2.2015 |
|
|
|
Cenelec |
EN 50636-2-94:2014 Household and similar electrical appliances — Safety — Part 2-94: Particular requirements for scissors type grass shears IEC 60335-2-94:2008 (Modified) |
13.2.2015 |
|
|
|
Cenelec |
EN 50636-2-100:2014 Household and similar electrical appliances — Safety — Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums IEC 60335-2-100:2002 (Modified) |
13.2.2015 |
|
|
|
Cenelec |
EN 50636-2-107:2015 Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers IEC 60335-2-107:2012 (Modified) |
15.1.2016 |
|
|
|
Cenelec |
EN 60204-31:2013 Safety of machinery — Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems IEC 60204-31:2013 |
11.4.2014 |
|
|
|
Cenelec |
EN 60335-1:2012 Household and similar electrical appliances — Safety — Part 1: General requirements IEC 60335-1:2010 (Modified) |
5.6.2012 |
EN 60335-1:2002 + A11:2004 + A12:2006 + A13:2008 + A14:2010 + A15:2011 + A1:2004 Note 2.1 |
21.11.2014 |
|
|
EN 60335-1:2012/AC:2014 |
|
|
|
|
|
EN 60335-1:2012/A11:2014 |
15.1.2016 |
Note 3 |
29.2.2016 |
|
Cenelec |
EN 60335-2-8:2015 Household and similar electrical appliances — Safety — Part 2-8: Particular requirements for shavers, hair clippers and similar appliances IEC 60335-2-8:2012 (Modified) |
13.5.2016 |
|
|
|
|
EN 60335-2-8:2015/A1:2016 IEC 60335-2-8:2012/A1:2015 |
9.9.2016 |
Note 3 |
28.12.2018 |
|
Cenelec |
EN 60335-2-23:2003 Household and similar electrical appliances — Safety — Part 2-23: Particular requirements for appliances for skin or hair care IEC 60335-2-23:2003 |
15.1.2016 |
|
|
|
|
EN 60335-2-23:2003/A2:2015 IEC 60335-2-23:2003/A2:2012 (Modified) |
15.1.2016 |
Note 3 |
29.9.2017 |
|
Cenelec |
EN 60335-2-36:2002 Household and similar electrical appliances — Safety — Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements IEC 60335-2-36:2002 |
5.4.2013 |
|
|
|
|
EN 60335-2-36:2002/AC:2007 |
|
|
|
|
|
EN 60335-2-36:2002/A11:2012 |
5.4.2013 |
Note 3 |
13.2.2015 |
|
Cenelec |
EN 60335-2-37:2002 Household and similar electrical appliances — Safety — Part 2-37: Particular requirements for commercial electric deep fat fryers IEC 60335-2-37:2002 |
5.4.2013 |
|
|
|
|
EN 60335-2-37:2002/AC:2007 |
|
|
|
|
|
EN 60335-2-37:2002/A11:2012 |
5.4.2013 |
Note 3 |
13.2.2015 |
|
|
EN 60335-2-37:2002/A12:2016 |
9.9.2016 |
Note 3 |
25.1.2019 |
|
Cenelec |
EN 60335-2-40:2003 Household and similar electrical appliances — Safety — Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers IEC 60335-2-40:2002 (Modified) |
28.11.2013 |
|
|
|
|
EN 60335-2-40:2003/AC:2010 |
|
|
|
|
|
EN 60335-2-40:2003/AC:2006 |
|
|
|
|
|
EN 60335-2-40:2003/A11:2004 |
28.11.2013 |
Note 3 |
28.11.2013 |
|
|
EN 60335-2-40:2003/A12:2005 |
28.11.2013 |
Note 3 |
28.11.2013 |
|
|
EN 60335-2-40:2003/A1:2006 IEC 60335-2-40:2002/A1:2005 (Modified) |
28.11.2013 |
Note 3 |
28.11.2013 |
|
|
EN 60335-2-40:2003/A2:2009 IEC 60335-2-40:2002/A2:2005 (Modified) |
28.11.2013 |
Note 3 |
28.11.2013 |
|
|
EN 60335-2-40:2003/A13:2012 |
28.11.2013 |
Note 3 |
11.7.2014 |
|
|
EN 60335-2-40:2003/A13:2012/AC:2013 |
|
|
|
|
Cenelec |
EN 60335-2-42:2003 Household and similar electrical appliances — Safety — Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens IEC 60335-2-42:2002 |
5.4.2013 |
|
|
|
|
EN 60335-2-42:2003/AC:2007 |
|
|
|
|
|
EN 60335-2-42:2003/A11:2012 |
5.4.2013 |
Note 3 |
13.2.2015 |
|
Cenelec |
EN 60335-2-47:2003 Household and similar electrical appliances — Safety — Part 2-47: Particular requirements for commercial electric boiling pans IEC 60335-2-47:2002 |
5.4.2013 |
|
|
|
|
EN 60335-2-47:2003/AC:2007 |
|
|
|
|
|
EN 60335-2-47:2003/A11:2012 |
5.4.2013 |
Note 3 |
13.2.2015 |
|
Cenelec |
EN 60335-2-48:2003 Household and similar electrical appliances — Safety — Part 2-48: Particular requirements for commercial electric grillers and toasters IEC 60335-2-48:2002 |
5.4.2013 |
|
|
|
|
EN 60335-2-48:2003/AC:2007 |
|
|
|
|
|
EN 60335-2-48:2003/A11:2012 |
5.4.2013 |
Note 3 |
13.2.2015 |
|
Cenelec |
EN 60335-2-49:2003 Household and similar electrical appliances — Safety — Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm IEC 60335-2-49:2002 |
5.4.2013 |
|
|
|
|
EN 60335-2-49:2003/AC:2007 |
|
|
|
|
|
EN 60335-2-49:2003/A11:2012 |
5.4.2013 |
Note 3 |
13.2.2015 |
|
Cenelec |
EN 60335-2-65:2003 Household and similar electrical appliances — Safety — Part 2-65: Particular requirements for air-cleaning appliances IEC 60335-2-65:2002 |
5.4.2013 |
|
|
|
|
EN 60335-2-65:2003/A11:2012 |
5.4.2013 |
Note 3 |
13.2.2015 |
|
Cenelec |
EN 60335-2-67:2012 Household and similar electrical appliances — Safety — Part 2-67: Particular requirements for floor treatment machines for commercial use IEC 60335-2-67:2012 (Modified) |
15.11.2012 |
EN 60335-2-67:2009 Note 2.1 |
3.5.2015 |
|
Cenelec |
EN 60335-2-68:2012 Household and similar electrical appliances — Safety — Part 2-68: Particular requirements for spray extraction machines, for commercial use IEC 60335-2-68:2012 (Modified) |
15.11.2012 |
EN 60335-2-68:2009 Note 2.1 |
3.5.2015 |
|
Cenelec |
EN 60335-2-69:2012 Household and similar electrical appliances — Safety — Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use IEC 60335-2-69:2012 (Modified) |
15.11.2012 |
EN 60335-2-69:2009 Note 2.1 |
28.3.2015 |
|
Cenelec |
EN 60335-2-72:2012 Household and similar electrical appliances — Safety — Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use IEC 60335-2-72:2012 (Modified) |
15.11.2012 |
EN 60335-2-72:2009 Note 2.1 |
3.5.2015 |
|
Cenelec |
EN 60335-2-77:2010 Safety of household and similar appliances — Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers IEC 60335-2-77:2002 (Modified) |
8.4.2011 |
|
|
|
Cenelec |
EN 60335-2-79:2012 Household and similar electrical appliances — Safety — Part 2-79: Particular requirements for high pressure cleaners and steam cleaners IEC 60335-2-79:2012 (Modified) |
15.11.2012 |
EN 60335-2-79:2009 Note 2.1 |
3.4.2015 |
|
Cenelec |
EN 60335-2-89:2010 Household and similar electrical appliances — Safety — Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor IEC 60335-2-89:2010 |
9.9.2016 |
|
|
|
|
EN 60335-2-89:2010/A1:2016 IEC 60335-2-89:2010/A1:2012 (Modified) |
9.9.2016 |
Note 3 |
12.2.2019 |
|
|
EN 60335-2-89:2010/A2:2017 IEC 60335-2-89:2010/A2:2015 (Modified) |
This is the first publication |
Note 3 |
3.7.2020 |
|
Cenelec |
EN 60335-2-95:2015 Household and similar electrical appliances — Safety — Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use IEC 60335-2-95:2011 (Modified) |
15.1.2016 |
|
|
|
|
EN 60335-2-95:2015/A1:2015 IEC 60335-2-95:2011/A1:2015 |
15.1.2016 |
Note 3 |
15.6.2018 |
|
Cenelec |
EN 60335-2-97:2006 Household and similar electrical appliances — Safety — Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment IEC 60335-2-97:2002 (Modified) + A1:2004 (Modified) |
15.1.2016 |
|
|
|
|
EN 60335-2-97:2006/A12:2015 |
15.1.2016 |
Note 3 |
29.9.2017 |
|
Cenelec |
EN 60335-2-102:2016 Household and similar electrical appliances — Safety — Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections IEC 60335-2-102:2004 (Modified) IEC 60335-2-102:2004/A1:2008 (Modified) + A1:2008 (Modified) IEC 60335-2-102:2004/A2:2012 (Modified) |
9.9.2016 |
|
|
|
Cenelec |
EN 60335-2-103:2015 Household and similar electrical appliances — Safety — Part 2-103: Particular requirements for drives for gates, doors and windows IEC 60335-2-103:2006 (Modified) + A1:2010 (Modified) |
15.1.2016 |
|
|
|
Cenelec |
EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing — Part 1: General requirements IEC 60519-1:2015 |
15.1.2016 |
|
|
|
Cenelec |
EN 60745-2-1:2010 Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills IEC 60745-2-1:2003 (Modified) + A1:2008 |
20.10.2010 |
|
|
|
Cenelec |
EN 60745-2-3:2011 Hand-held motor-operated electric tools — Safety — Part 2-3: Particular requirements for grinders, polishers and disk-type sanders IEC 60745-2-3:2006 (Modified) + A1:2010 (Modified) |
18.11.2011 |
|
|
|
|
EN 60745-2-3:2011/A2:2013 IEC 60745-2-3:2006/A2:2012 (Modified) |
28.11.2013 |
Note 3 |
25.2.2016 |
|
|
EN 60745-2-3:2011/A11:2014 |
13.2.2015 |
Note 3 |
21.4.2016 |
|
|
EN 60745-2-3:2011/A12:2014 |
15.1.2016 |
Note 3 |
17.11.2017 |
|
|
EN 60745-2-3:2011/A13:2015 |
13.5.2016 |
Note 3 |
28.9.2018 |
|
Cenelec |
EN 60745-2-6:2010 Hand-held motor-operated electric tools — Safety — Part 2-6: Particular requirements for hammers IEC 60745-2-6:2003 (Modified) + A1:2006 |
20.10.2010 |
|
|
|
Cenelec |
EN 60745-2-11:2010 Hand-held motor-operated electric tools — Safety — Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) IEC 60745-2-11:2003 (Modified) + A1:2008 |
20.10.2010 |
|
|
|
Cenelec |
EN 60745-2-12:2009 Hand-held motor-operated electric tools — Safety — Part 2-12: Particular requirements for concrete vibrators IEC 60745-2-12:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-13:2009 Hand-held motor-operated electric tools — Safety — Part 2-13: Particular requirements for chain saws IEC 60745-2-13:2006 (Modified) |
18.12.2009 |
|
|
|
|
EN 60745-2-13:2009/A1:2010 IEC 60745-2-13:2006/A1:2009 |
20.7.2011 |
Note 3 |
1.12.2013 |
|
Cenelec |
EN 60745-2-15:2009 Hand-held motor-operated electric tools — Safety — Part 2-15: Particular requirements for hedge trimmers IEC 60745-2-15:2006 (Modified) |
18.12.2009 |
|
|
|
|
EN 60745-2-15:2009/A1:2010 IEC 60745-2-15:2006/A1:2009 |
28.11.2013 |
Note 3 |
28.11.2013 |
|
Cenelec |
EN 60745-2-16:2010 Hand-held motor-operated electric tools — Safety — Part 2-16: Particular requirements for tackers IEC 60745-2-16:2008 (Modified) |
8.4.2011 |
|
|
|
Cenelec |
EN 60745-2-17:2010 Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers IEC 60745-2-17:2010 (Modified) |
8.4.2011 |
|
|
|
Cenelec |
EN 60745-2-18:2009 Hand-held motor-operated electric tools — Safety — Part 2-18: Particular requirements for strapping tools IEC 60745-2-18:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-19:2009 Hand-held motor-operated electric tools — Safety — Part 2-19: Particular requirements for jointers IEC 60745-2-19:2005 (Modified) |
18.12.2009 |
|
|
|
|
EN 60745-2-19:2009/A1:2010 IEC 60745-2-19:2005/A1:2010 |
8.4.2011 |
Note 3 |
1.6.2013 |
|
Cenelec |
EN 60745-2-20:2009 Hand-held motor-operated electric tools — Safety — Part 2-20: Particular requirements for band saws IEC 60745-2-20:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-21:2009 Hand-held motor-operated electric tools — Safety — Part 2-21: Particular requirements for drain cleaners IEC 60745-2-21:2002 (Modified) |
18.12.2009 |
|
|
|
|
EN 60745-2-21:2009/A1:2010 IEC 60745-2-21:2002/A1:2008 |
20.7.2011 |
Note 3 |
1.12.2013 |
|
Cenelec |
EN 60745-2-22:2011 Hand-held motor-operated electric tools — Safety — Part 2-22: Particular requirements for cut-off machines IEC 60745-2-22:2011 (Modified) |
18.11.2011 |
|
|
|
|
EN 60745-2-22:2011/A11:2013 |
28.11.2013 |
Note 3 |
17.12.2015 |
|
Cenelec |
EN 60745-2-23:2013 Hand-held motor-operated electric tools — Safety — Part 2-23: Particular requirements for die grinders and small rotary tools IEC 60745-2-23:2012 (Modified) |
28.11.2013 |
|
|
|
Cenelec |
EN 60947-5-3:2013 Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions (PDDB) IEC 60947-5-3:2013 |
11.4.2014 |
|
|
|
Cenelec |
EN 60947-5-5:1997 Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function IEC 60947-5-5:1997 |
28.11.2013 |
|
|
|
|
EN 60947-5-5:1997/A1:2005 IEC 60947-5-5:1997/A1:2005 |
28.11.2013 |
Note 3 |
28.11.2013 |
|
|
EN 60947-5-5:1997/A11:2013 |
28.11.2013 |
Note 3 |
3.12.2015 |
|
|
EN 60947-5-5:1997/A2:2017 IEC 60947-5-5:1997/A2:2016 |
9.6.2017 |
Note 3 |
24.2.2020 |
|
Cenelec |
EN 61029-2-3:2011 Safety of transportable motor-operated electric tools — Part 2-3: Particular requirements for planers and thicknessers IEC 61029-2-3:1993 (Modified) + A1:2001 |
18.11.2011 |
|
|
|
Cenelec |
EN 61029-2-4:2011 Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders IEC 61029-2-4:1993 (Modified) + A1:2001 (Modified) |
18.11.2011 |
|
|
|
Cenelec |
EN 61029-2-5:2011 Safety of transportable motor-operated electric tools — Part 2-5: Particular requirements for band saws IEC 61029-2-5:1993 (Modified) + A1:2001 (Modified) |
15.1.2016 |
|
|
|
|
EN 61029-2-5:2011/A11:2015 |
15.1.2016 |
Note 3 |
1.12.2016 |
|
Cenelec |
EN 61029-2-8:2010 Safety of transportable motor-operated electric tools — Part 2-8: Particular requirements for single spindle vertical moulders IEC 61029-2-8:1995 (Modified) + A1:1999 |
20.10.2010 |
|
|
|
Cenelec |
EN 61029-2-9:2012 Safety of transportable motor-operated electric tools — Part 2-9: Particular requirements for mitre saws IEC 61029-2-9:1995 (Modified) |
5.4.2013 |
EN 61029-2-9:2009 Note 2.1 |
3.9.2015 |
|
|
EN 61029-2-9:2012/A11:2013 |
28.11.2013 |
Note 3 |
12.8.2016 |
|
Cenelec |
EN 61029-2-11:2012 Safety of transportable motor-operated electric tools — Part 2-11: Particular requirements for combined mitre and bench saws IEC 61029-2-11:2001 (Modified) |
5.4.2013 |
EN 61029-2-11:2009 Note 2.1 |
3.9.2015 |
|
|
EN 61029-2-11:2012/A11:2013 |
28.11.2013 |
Note 3 |
12.8.2016 |
|
Cenelec |
EN 61029-2-12:2011 Safety of transportable motor-operated electric tools — Part 2-12: Particular requirements for threading machines IEC 61029-2-12:2010 (Modified) |
18.11.2011 |
|
|
|
Cenelec |
EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 1: General requirements IEC 62841-1:2014 (Modified) |
15.1.2016 |
EN 60335-1:2012 + A11:2014 EN 60745-1:2009 + A11:2010 EN 61029-1:2009 + A11:2010 Note 2.3 |
15.12.2021 |
|
|
EN 62841-1:2015/AC:2015 |
|
|
|
|
Cenelec |
EN 62841-2-2:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified) IEC 62841-2-2:2014 |
15.1.2016 |
EN 60745-2-2:2010 Note 2.1 |
21.8.2019 |
|
|
EN 62841-2-2:2014/AC:2015 |
|
|
|
|
Cenelec |
EN 62841-2-4:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified) IEC 62841-2-4:2014 |
15.1.2016 |
EN 60745-2-4:2009 + A11:2011 Note 2.1 |
21.8.2019 |
|
|
EN 62841-2-4:2014/AC:2015 |
|
|
|
|
Cenelec |
EN 62841-2-5:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified) IEC 62841-2-5:2014 |
15.1.2016 |
EN 60745-2-5:2010 Note 2.1 |
21.8.2019 |
|
Cenelec |
EN 62841-2-8:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-8: Particular requirements for hand-held shears and nibblers IEC 62841-2-8:2016 (Modified) |
9.6.2017 |
EN 60745-2-8:2009 Note 2.1 |
2.5.2020 |
|
Cenelec |
EN 62841-2-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-9: Particular requirements for hand-held tappers and threaders IEC 62841-2-9:2015 (Modified) |
15.1.2016 |
EN 60745-2-9:2009 Note 2.1 |
21.8.2019 |
|
|
EN 62841-2-9:2015/AC:2016-10 |
|
|
|
|
Cenelec |
EN 62841-2-10:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-10: Particular requirements for hand-held mixers IEC 62841-2-10:2017 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 62841-2-11:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-11: Particular requirements for hand-held reciprocating saws IEC 62841-2-11:2015 (Modified) |
9.9.2016 |
EN 60745-2-11:2010 Note 2.1 |
23.12.2019 |
|
Cenelec |
EN 62841-2-14:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-14: Particular requirements for hand-held planers IEC 62841-2-14:2015 (Modified) |
13.5.2016 |
EN 60745-2-14:2009 + A2:2010 Note 2.1 |
31.8.2019 |
|
Cenelec |
EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) IEC 62841-3-1:2014 |
15.1.2016 |
EN 61029-2-1:2012 Note 2.1 |
21.8.2019 |
|
|
EN 62841-3-1:2014/AC:2015 |
|
|
|
|
Cenelec |
EN 62841-3-6:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) IEC 62841-3-6:2014 |
15.1.2016 |
EN 61029-2-6:2010 Note 2.1 |
21.8.2019 |
|
|
EN 62841-3-6:2014/AC:2015 |
|
|
|
|
Cenelec |
EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws IEC 62841-3-9:2014 (Modified) |
13.5.2016 |
EN 61029-2-9:2012 + A11:2013 Note 2.1 |
15.11.2019 |
|
|
EN 62841-3-9:2015/AC:2016-09 |
|
|
|
|
Cenelec |
EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines IEC 62841-3-10:2015 (Modified) |
13.5.2016 |
EN 61029-2-10:2010 + A11:2013 Note 2.1 |
19.10.2019 |
|
|
EN 62841-3-10:2015/AC:2016-07 |
|
|
|
|
Cenelec |
EN 62841-3-13:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-13: Particular requirements for transportable drills IEC 62841-3-13:2017 (Modified) |
This is the first publication |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 92/87 |
Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2018/C 092/02)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 1010-1:2004+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 1: Common requirements |
8.4.2016 |
|
|
|
CEN |
EN 1010-2:2006+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 2: Printing and varnishing machines including pre-press machinery |
8.4.2016 |
|
|
|
CEN |
EN 1127-1:2011 Explosive atmospheres — Explosion prevention and protection — Part 1: Basic concepts and methodology |
8.4.2016 |
|
|
|
CEN |
EN 1127-2:2014 Explosive atmospheres — Explosion prevention and protection — Part 2: Basic concepts and methodology for mining |
8.4.2016 |
|
|
|
CEN |
EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines |
8.4.2016 |
|
|
|
|
EN 1710:2005+A1:2008/AC:2010 |
|
|
|
|
CEN |
EN 1755:2015 Industrial Trucks — Safety requirements and verification — Supplementary requirements for operation in potentially explosive atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 1834-1:2000 Reciprocating internal combustion engines — Safety requirements for design and construction of engines for use in potentially explosive atmospheres — Part 1: Group II engines for use in flammable gas and vapour atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 1834-2:2000 Reciprocating internal combustion engines — Safety requirements for design and construction of engines for use in potentially explosive atmospheres — Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust |
8.4.2016 |
|
|
|
CEN |
EN 1834-3:2000 Reciprocating internal combustion engines — Safety requirements for design and construction of engines for use in potentially explosive atmospheres — Part 3: Group II engines for use in flammable dust atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours |
9.6.2017 |
EN 1839:2012 EN 14756:2006 Note 2.1 |
11.1.2018 |
|
CEN |
EN 1953:2013 Atomising and spraying equipment for coating materials — Safety requirements |
8.4.2016 |
|
|
|
CEN |
EN 12581:2005+A1:2010 Coating plants — Machinery for dip coating and electrodeposition of organic liquid coating material — Safety requirements |
8.4.2016 |
|
|
|
CEN |
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure — Safety requirements |
8.4.2016 |
|
|
|
CEN |
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials — Safety requirements — Part 1: Mixing machinery for use in vehicle refinishing |
8.4.2016 |
|
|
|
CEN |
EN 13012:2012 Petrol filling stations — Construction and performance of automatic nozzles for use on fuel dispensers |
8.4.2016 |
|
|
|
CEN |
EN 13160-1:2003 Leak detection systems — Part 1: General principles |
8.4.2016 |
|
|
|
CEN |
EN 13237:2012 Potentially explosive atmospheres — Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 13463-2:2004 Non-electrical equipment for use in potentially explosive atmospheres — Part 2: Protection by flow restricting enclosure ‘fr’ |
8.4.2016 |
|
|
|
CEN |
EN 13463-3:2005 Non-electrical equipment for use in potentially explosive atmospheres — Part 3: Protection by flameproof enclosure ‘d’ |
8.4.2016 |
|
|
|
CEN |
EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels — Part 1: Overfill prevention devices with closure device |
12.8.2016 |
EN 13616:2004 Note 2.1 |
11.7.2017 |
|
CEN |
EN 13617-1:2012 Petrol filling stations — Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
8.4.2016 |
|
|
|
CEN |
EN 13617-2:2012 Petrol filling stations — Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
8.4.2016 |
|
|
|
CEN |
EN 13617-3:2012 Petrol filling stations — Part 3: Safety requirements for construction and performance of shear valves |
8.4.2016 |
|
|
|
CEN |
EN 13617-4:2012 Petrol filling stations — Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
8.4.2016 |
|
|
|
CEN |
EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles — Nozzle, test requirements and dimensions |
8.4.2016 |
|
|
|
CEN |
EN 13852-1:2013 Cranes — Offshore cranes — Part 1: General-purpose offshore cranes |
8.4.2016 |
|
|
|
CEN |
EN 14034-1:2004+A1:2011 Determination of explosion characteristics of dust clouds — Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
8.4.2016 |
|
|
|
CEN |
EN 14034-2:2006+A1:2011 Determination of explosion characteristics of dust clouds — Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
8.4.2016 |
|
|
|
CEN |
EN 14034-3:2006+A1:2011 Determination of explosion characteristics of dust clouds — Part 3: Determination of the lower explosion limit LEL of dust clouds |
8.4.2016 |
|
|
|
CEN |
EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds — Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
8.4.2016 |
|
|
|
CEN |
EN 14373:2005 Explosion suppression systems |
8.4.2016 |
|
|
|
CEN |
EN 14460:2006 Explosion resistant equipment |
8.4.2016 |
|
|
|
CEN |
EN 14491:2012 Dust explosion venting protective systems |
8.4.2016 |
|
|
|
CEN |
EN 14492-1:2006+A1:2009 Cranes — Power driven winches and hoists — Part 1: Power driven winches |
8.4.2016 |
|
|
|
|
EN 14492-1:2006+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 14492-2:2006+A1:2009 Cranes — Power driven winches and hoists — Part 2: Power driven hoists |
8.4.2016 |
|
|
|
|
EN 14492-2:2006+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 14522:2005 Determination of the auto ignition temperature of gases and vapours |
8.4.2016 |
|
|
|
CEN |
EN 14591-1:2004 Explosion prevention and protection in underground mines — Protective systems — Part 1: 2-bar explosion proof ventilation structure |
8.4.2016 |
|
|
|
|
EN 14591-1:2004/AC:2006 |
|
|
|
|
CEN |
EN 14591-2:2007 Explosion prevention and protection in underground mines — Protective systems — Part 2: Passive water trough barriers |
8.4.2016 |
|
|
|
|
EN 14591-2:2007/AC:2008 |
|
|
|
|
CEN |
EN 14591-4:2007 Explosion prevention and protection in underground mines — Protective systems — Part 4: Automatic extinguishing systems for road headers |
8.4.2016 |
|
|
|
|
EN 14591-4:2007/AC:2008 |
|
|
|
|
CEN |
EN 14677:2008 Safety of machinery — Secondary steelmaking — Machinery and equipment for treatment of liquid steel |
8.4.2016 |
|
|
|
CEN |
EN 14678-1:2013 LPG equipment and accessories — Construction and performance of LPG equipment for automotive filling stations — Part 1: Dispensers |
8.4.2016 |
|
|
|
CEN |
EN 14681:2006+A1:2010 Safety of machinery — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
8.4.2016 |
|
|
|
CEN |
EN 14797:2006 Explosion venting devices |
8.4.2016 |
|
|
|
CEN |
EN 14973:2015 Conveyor belts for use in underground installations — Electrical and flammability safety requirements |
8.4.2016 |
|
|
|
CEN |
EN 14983:2007 Explosion prevention and protection in underground mines — Equipment and protective systems for firedamp drainage |
8.4.2016 |
|
|
|
CEN |
EN 14986:2017 Design of fans working in potentially explosive atmospheres |
9.6.2017 |
EN 14986:2007 Note 2.1 |
31.1.2020 |
|
CEN |
EN 14994:2007 Gas explosion venting protective systems |
8.4.2016 |
|
|
|
CEN |
EN 15089:2009 Explosion isolation systems |
8.4.2016 |
|
|
|
CEN |
EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations |
8.4.2016 |
|
|
|
CEN |
EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
8.4.2016 |
|
|
|
CEN |
EN 15268:2008 Petrol filling stations — Safety requirements for the construction of submersible pump assemblies |
8.4.2016 |
|
|
|
CEN |
EN 15794:2009 Determination of explosion points of flammable liquids |
8.4.2016 |
|
|
|
CEN |
EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
8.4.2016 |
|
|
|
CEN |
EN 16009:2011 Flameless explosion venting devices |
8.4.2016 |
|
|
|
CEN |
EN 16020:2011 Explosion diverters |
8.4.2016 |
|
|
|
CEN |
EN 16447:2014 Explosion isolation flap valves |
8.4.2016 |
|
|
|
CEN |
EN ISO 16852:2016 Flame arresters — Performance requirements, test methods and limits for use (ISO 16852:2016) |
9.6.2017 |
EN ISO 16852:2010 Note 2.1 |
30.11.2017 |
|
CEN |
EN ISO/IEC 80079-20-2:2016 Explosive atmospheres — Part 20-2: Material characteristics — Combustible dusts test methods (ISO/IEC 80079-20-2:2016) |
This is the first publication |
EN 13821:2002 Note 2.1 |
30.9.2018 |
|
|
EN ISO/IEC 80079-20-2:2016/AC:2017 |
|
|
|
|
CEN |
EN ISO 80079-36:2016 Explosive atmospheres — Part 36: Non-electrical equipment for explosive atmospheres — Basic method and requirements (ISO 80079-36:2016) |
12.8.2016 |
EN 13463-1:2009 Note 2.1 |
31.10.2019 |
|
CEN |
EN ISO 80079-37:2016 Explosive atmospheres — Part 37: Non-electrical equipment for explosive atmospheres — Non-electrical type of protection constructional safety ‘'c’', control of ignition sources ‘'b’', liquid immersion ‘'k’' (ISO 80079-37:2016) |
12.8.2016 |
EN 13463-5:2011 EN 13463-6:2005 EN 13463-8:2003 Note 2.1 |
31.10.2019 |
|
Cenelec |
EN 50050-1:2013 Electrostatic hand-held spraying equipment — Safety requirements — Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
8.4.2016 |
EN 50050:2006 Note 2.1 |
14.10.2016 |
|
Cenelec |
EN 50050-2:2013 Electrostatic hand-held spraying equipment — Safety requirements — Part 2: Hand-held spraying equipment for ignitable coating powder |
8.4.2016 |
EN 50050:2006 Note 2.1 |
14.10.2016 |
|
Cenelec |
EN 50050-3:2013 Electrostatic hand-held spraying equipment — Safety requirements — Part 3: Hand-held spraying equipment for ignitable flock |
8.4.2016 |
EN 50050:2006 Note 2.1 |
14.10.2016 |
|
Cenelec |
EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen — Performance requirements and test methods |
8.4.2016 |
|
|
|
Cenelec |
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material — Safety requirements |
8.4.2016 |
|
|
|
Cenelec |
EN 50177:2009 Stationary electrostatic application equipment for ignitable coating powders — Safety requirements |
8.4.2016 |
|
|
|
|
EN 50177:2009/A1:2012 |
8.4.2016 |
Note 3 |
|
|
Cenelec |
EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material — Safety requirements |
8.4.2016 |
EN 50223:2010 Note 2.1 |
13.4.2018 |
|
Cenelec |
EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen — Requirements and tests for apparatus using software and/or digital technologies |
8.4.2016 |
|
|
|
Cenelec |
EN 50281-2-1:1998 Electrical apparatus for use in the presence of combustible dust — Part 2-1: Test methods — Methods for determining the minimum ignition temperatures of dust |
8.4.2016 |
|
|
|
|
EN 50281-2-1:1998/AC:1999 |
|
|
|
|
Cenelec |
EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust |
8.4.2016 |
|
|
|
Cenelec |
EN 50381:2004 Transportable ventilated rooms with or without an internal source of release |
8.4.2016 |
|
|
|
|
EN 50381:2004/AC:2005 |
|
|
|
|
Cenelec |
EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks |
8.4.2016 |
|
|
|
Cenelec |
EN 60079-0:2012 Explosive atmospheres — Part 0: Equipment — General requirements IEC 60079-0:2011 (Modified) + IS1:2013 |
8.4.2016 |
|
|
|
|
EN 60079-0:2012/A11:2013 |
8.4.2016 |
Note 3 |
7.10.2016 |
|
Cenelec |
EN 60079-1:2014 Explosive atmospheres — Part 1: Equipment protection by flameproof enclosures ‘d’ IEC 60079-1:2014 |
8.4.2016 |
EN 60079-1:2007 Note 2.1 |
1.8.2017 |
|
Cenelec |
EN 60079-2:2014 Explosive atmospheres — Part 2: Equipment protection by pressurized enclosure ‘p’ IEC 60079-2:2014 |
8.4.2016 |
EN 60079-2:2007 EN 61241-4:2006 Note 2.1 |
25.8.2017 |
|
|
EN 60079-2:2014/AC:2015 |
|
|
|
|
Cenelec |
EN 60079-5:2015 Explosive atmospheres — Part 5: Equipment protection by powder filling ‘q’ IEC 60079-5:2015 |
8.4.2016 |
EN 60079-5:2007 Note 2.1 |
24.3.2018 |
|
Cenelec |
EN 60079-6:2015 Explosive atmospheres — Part 6: Equipment protection by liquid immersion ‘o’ IEC 60079-6:2015 |
8.4.2016 |
EN 60079-6:2007 Note 2.1 |
27.3.2018 |
|
Cenelec |
EN 60079-7:2015 Explosive atmospheres — Part 7: Equipment protection by increased safety ‘e’ IEC 60079-7:2015 |
8.4.2016 |
EN 60079-7:2007 Note 2.1 |
31.7.2018 |
|
Cenelec |
EN 60079-11:2012 Explosive atmospheres — Part 11: Equipment protection by intrinsic safety ‘i’ IEC 60079-11:2011 |
8.4.2016 |
EN 60079-27:2008 Note 2.1 |
|
|
Cenelec |
EN 60079-15:2010 Explosive atmospheres — Part 15: Equipment protection by type of protection ‘n’ IEC 60079-15:2010 |
8.4.2016 |
|
|
|
Cenelec |
EN 60079-18:2015 Explosive atmospheres — Part 18: Equipment protection by encapsulation ‘m’ IEC 60079-18:2014 |
8.4.2016 |
EN 60079-18:2009 Note 2.1 |
16.1.2018 |
|
|
EN 60079-18:2015/A1:2017 IEC 60079-18:2014/A1:2017 |
This is the first publication |
Note 3 |
28.9.2020 |
|
Cenelec |
EN 60079-20-1:2010 Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data IEC 60079-20-1:2010 |
8.4.2016 |
|
|
|
Cenelec |
EN 60079-25:2010 Explosive atmospheres — Part 25: Intrinsically safe electrical systems IEC 60079-25:2010 |
8.4.2016 |
|
|
|
|
EN 60079-25:2010/AC:2013 |
|
|
|
|
Cenelec |
EN 60079-26:2015 Explosive atmospheres — Part 26: Equipment with Equipment Protection Level (EPL) Ga IEC 60079-26:2014 |
8.4.2016 |
EN 60079-26:2007 Note 2.1 |
2.12.2017 |
|
Cenelec |
EN 60079-28:2015 Explosive atmospheres — Part 28: Protection of equipment and transmission systems using optical radiation IEC 60079-28:2015 |
8.4.2016 |
|
1.7.2018 |
|
Cenelec |
EN 60079-29-1:2016 Explosive atmospheres — Part 29-1: Gas detectors — Performance requirements of detectors for flammable gases IEC 60079-29-1:2016 (Modified) |
9.6.2017 |
EN 60079-29-1:2007 Note 2.1 |
23.12.2019 |
|
Cenelec |
EN 60079-29-4:2010 Explosive atmospheres — Part 29-4: Gas detectors — Performance requirements of open path detectors for flammable gases IEC 60079-29-4:2009 (Modified) |
8.4.2016 |
|
|
|
Cenelec |
EN 60079-30-1:2007 Explosive atmospheres — Part 30-1: Electrical resistance trace heating — General and testing requirements IEC 60079-30-1:2007 |
8.4.2016 |
|
|
|
Cenelec |
EN 60079-30-1:2017 Explosive atmospheres — Part 30-1: Electrical resistance trace heating — General and testing requirements IEC/IEEE 60079-30-1:2015 (Modified) |
8.9.2017 |
EN 60079-30-1:2007 Note 2.1 |
6.3.2020 |
|
Cenelec |
EN 60079-31:2014 Explosive atmospheres — Part 31: Equipment dust ignition protection by enclosure ‘t’ IEC 60079-31:2013 |
8.4.2016 |
EN 60079-31:2009 Note 2.1 |
1.1.2017 |
|
Cenelec |
EN 60079-35-1:2011 Explosive atmospheres — Part 35-1: Caplights for use in mines susceptible to firedamp — General requirements — Construction and testing in relation to the risk of explosion IEC 60079-35-1:2011 |
8.4.2016 |
|
|
|
|
EN 60079-35-1:2011/AC:2011 |
|
|
|
|
Cenelec |
EN ISO/IEC 80079-34:2011 Explosive atmospheres — Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
8.4.2016 |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 92/98 |
Commission communication in the framework of the implementation of Commission Regulation (EU) No 206/2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for air conditioners and comfort fans and of Commission Delegated Regulation (EU) No 626/2011 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of air conditioners
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2018/C 092/03)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 12102-1:2017 Air conditioners, liquid chilling packages, heat pumps, process chillers and dehumidifiers with electrically driven compressors — Determination of the sound power level — Part 1: Air conditioners, liquid chilling packages, heat pumps for space heating and cooling, dehumidifiers and process chillers |
This is the first publication |
EN 12102:2013 Note 2.1 |
1.9.2018 |
|
This standard does not cover comfort fans. Commission communication 2012/C 172/01 still applies to comfort fans. |
||||
|
CEN |
EN 12900:2013 Refrigerant compressors — Rating conditions, tolerances and presentation of manufacturer's performance data |
11.4.2014 |
|
|
|
This standard does not cover comfort fans. Commission communication 2012/C 172/01 still applies to comfort fans. |
||||
|
CEN |
EN 14511-2:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling — Part 2: Test conditions |
11.4.2014 |
|
|
|
This standard does not cover comfort fans. Commission communication 2012/C 172/01 still applies to comfort fans. |
||||
|
CEN |
EN 14511-3:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling — Part 3: Test methods |
11.4.2014 |
|
|
|
This standard does not cover comfort fans. Commission communication 2012/C 172/01 still applies to comfort fans. |
||||
|
CEN |
EN 14825:2016 Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling — Testing and rating at part load conditions and calculation of seasonal performance |
This is the first publication |
EN 14825:2013 Note 2.1 |
1.9.2018 |
|
This standard does not cover comfort fans. Commission communication 2012/C 172/01 still applies to comfort fans. |
||||
|
CEN |
EN 15218:2013 Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling — Terms, definitions, test conditions, test methods and requirements |
11.4.2014 |
|
|
|
This standard does not cover comfort fans. Commission communication 2012/C 172/01 still applies to comfort fans. |
||||
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, 1000, Brussels, BELGIUM. Tel. +32 2 5500811.Fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, 1000, Brussels, BELGIUM. Tel. +32 2 5196871. Fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, FRANCE. Tel. +33 492 944200. Fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 92/101 |
Commission communication in the framework of the implementation of Regulation (EC) No 765/2008 of the European Parliament and of the Council, Decision No 768/2008/EC of the European Parliament and of the Council and Regulation (EC) No 1221/2009 of the European Parliament and of the Council
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2018/C 092/04)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN ISO 9000:2015 Quality management systems — Fundamentals and vocabulary (ISO 9000:2015) |
11.12.2015 |
EN ISO 9000:2005 Note 2.1 |
15.9.2018 |
|
CEN |
EN ISO 9001:2015 Quality management systems — Requirements (ISO 9001:2015) |
11.12.2015 |
EN ISO 9001:2008 Note 2.1 |
15.9.2018 |
|
CEN |
EN ISO 14001:2015 Environmental management systems — Requirements with guidance for use (ISO 14001:2015) |
11.12.2015 |
EN ISO 14001:2004 Note 2.1 |
15.9.2018 |
|
CEN |
EN ISO 14004:2016 Environmental management systems — General guidelines on implementation (ISO 14004:2016) |
10.6.2016 |
EN ISO 14004:2010 Note 2.1 |
30.4.2019 |
|
CEN |
EN ISO 14015:2010 Environmental management — Environmental assessment of sites and organizations (EASO) (ISO 14015:2001) |
5.10.2011 |
|
|
|
CEN |
EN ISO 14020:2001 Environmental labels and declarations — General principles (ISO 14020:2000) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
12.8.2016 |
EN ISO 14021:2001 Note 2.1 |
31.10.2018 |
|
CEN |
EN ISO 14024:2000 Environmental labels and declarations — Type I environmental labelling — Principles and procedures (ISO 14024:1999) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14031:2013 Environmental management — Environmental performance evaluation — Guidelines (ISO 14031:2013) |
28.11.2013 |
EN ISO 14031:1999 Note 2.1 |
28.2.2014 |
|
CEN |
EN ISO 14040:2006 Environmental management — Life cycle assessment — Principles and framework (ISO 14040:2006) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14044:2006 Environmental management — Life cycle assessment — Requirements and guidelines (ISO 14044:2006) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14050:2010 Environmental management — Vocabulary (ISO 14050:2009) |
5.10.2011 |
|
|
|
CEN |
EN ISO 14063:2010 Environmental management — Environmental communication — Guidelines and examples (ISO 14063:2006) |
5.10.2011 |
|
|
|
CEN |
EN ISO 14064-1:2012 Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006) |
28.11.2013 |
|
|
|
CEN |
EN ISO 14064-2:2012 Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2006) |
28.11.2013 |
|
|
|
CEN |
EN ISO 14064-3:2012 Greenhouse gases — Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (ISO 14064-3:2006) |
28.11.2013 |
|
|
|
CEN |
EN ISO 14065:2013 Greenhouse gases — Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2013) |
7.9.2013 |
EN ISO 14065:2012 Note 2.1 |
31.10.2013 |
|
CEN |
EN ISO 15189:2012 Medical laboratories — Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
13.3.2013 |
EN ISO 15189:2007 Note 2.1 |
30.11.2015 |
|
CEN |
EN ISO 15195:2003 Laboratory medicine — Requirements for reference measurement laboratories (ISO 15195:2003) |
5.10.2011 |
|
|
|
CEN |
EN ISO/IEC 17000:2004 Conformity assessment — Vocabulary and general principles (ISO/IEC 17000:2004) |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17011:2017 Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017) |
This is the first publication |
EN ISO/IEC 17011:2004 Note 2.1 |
31.12.2020 |
|
CEN |
EN ISO/IEC 17020:2012 Conformity assessment — Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
25.5.2012 |
EN ISO/IEC 17020:2004 Note 2.1 |
1.3.2015 |
|
CEN |
EN ISO/IEC 17021-1:2015 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements (ISO/IEC 17021-1:2015) |
11.12.2015 |
EN ISO/IEC 17021:2011 Note 2.1 |
8.7.2017 |
|
CEN |
EN ISO/IEC 17024:2012 Conformity assessment — General requirements for bodies operating certification of persons (ISO/IEC 17024:2012) |
7.9.2013 |
EN ISO/IEC 17024:2003 Note 2.1 |
1.7.2015 |
|
CEN |
EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
This is the first publication |
EN ISO/IEC 17025:2005 Note 2.1 |
31.12.2020 |
|
CEN |
EN ISO 17034:2016 General requirements for the competence of reference material producers (ISO 17034:2016) |
8.9.2017 |
|
|
|
CEN |
EN ISO/IEC 17040:2005 Conformity assessment — General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005) |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17043:2010 Conformity assessment — General requirements for proficiency testing (ISO/IEC 17043:2010) |
28.11.2013 |
|
|
|
CEN |
EN ISO/IEC 17050-1:2010 Conformity assessment — Supplier's declaration of conformity — Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15) |
5.10.2011 |
EN ISO/IEC 17050-1:2004 Note 2.1 |
5.10.2011 |
|
CEN |
EN ISO/IEC 17050-2:2004 Conformity assessment — Supplier's declaration of conformity — Part 2: Supporting documentation (ISO/IEC 17050-2:2004) |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17065:2012 Conformity assessment — Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
7.9.2013 |
EN 45011:1998 Note 2.1 |
15.9.2015 |
|
CEN |
EN ISO/IEC 17067:2013 Conformity assessment — Fundamentals of product certification and guidelines for product certification schemes (ISO/IEC 17067:2013) |
12.2.2016 |
|
|
|
CEN |
EN ISO 19011:2011 Guidelines for auditing management systems (ISO 19011:2011) |
25.5.2012 |
EN ISO 19011:2002 Note 2.1 |
31.5.2012 |
|
CEN |
EN ISO 22870:2016 Point-of-care testing (POCT) — Requirements for quality and competence (ISO 22870:2016) |
10.3.2017 |
EN ISO 22870:2006 Note 2.1 |
30.11.2019 |
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 92/106 |
Commission communication in the framework of the implementation of Directive 1999/5/EC of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity and Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2018/C 092/05)
Directive 1999/5/EC
In accordance with the transitional provision of Article 48 of Directive 2014/53/EU (1), Member States shall not impede the making available on the market or putting into service of radio equipment covered by Directive 2014/53/EU which is in conformity with Directive 1999/5/EC (2) and which was placed on the market before 13 June 2017. Accordingly, harmonised standards the references to which have been published under Directive 1999/5/EC, as lastly listed in Commission Communication published in the Official Journal of the European Union C 249 of 8 July 2016, p. 1 , and corrected by Corrigendum published in the Official Journal of the European Union C 342 of 17 September 2016, p. 15 , and Corrigendum published in the Official Journal of the European Union C 403 of 1 November 2016, p. 26 , continue to confer a presumption of conformity with that Directive until 12 June 2017.
Directive 2014/53/EU
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
|
ESO (3) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
Standard aims to cover Article(s) of Directive 2014/53/EU |
|
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
|
Cenelec |
EN 50360:2017 Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 50385:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz — 100 GHz), when placed on the market |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 50401:2017 Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz — 100 GHz), when put into service |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 50566:2017 Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body |
17.11.2017 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 55035:2017 Electromagnetic compatibility of multimedia equipment — Immunity requirements CISPR 35:2016 (Modified) |
17.11.2017 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 300 065 V2.1.2 Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 300 086 V2.1.2 Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
9.12.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 300 113 V2.2.1 Land Mobile Service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 219 V2.1.1 Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-2 V3.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-3-1 V2.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz) |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-3-2 V1.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz, 869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-4 V1.1.1 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 224 V2.1.1 Land Mobile Service; Radio Equipment for use in a Paging Service operating within the frequency range 25 MHz — 470 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
13.10.2017 |
EN 300 224-2 V1.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 300 224-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 296 V2.1.1 Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 328 V2.1.1 Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 330 V2.1.1 Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 341 V2.1.1 Land Mobile Service; Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 390 V2.1.1 Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 422-1 V2.1.2 Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Class A Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 422-2 V2.1.1 Wireless Microphones; Audio PMSE up to 3 GHz; Part 2: Class B Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 422-3 V2.1.1 Wireless Microphones; Audio PMSE up to 3 GHz; Part 3: Class C Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 422-4 V2.1.1 Wireless Microphones; Audio PMSE up to 3 GHz; Part 4: Assistive Listening Devices including personal sound amplifiers and inductive systems up to 3 GHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
9.2.2018 |
|
|
Article 3(2) |
|
ETSI |
EN 300 433 V2.1.1 Citizens' Band (CB) radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 440 V2.1.1 Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
14.7.2017 |
EN 300 440-2 V1.4.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
|
This harmonised standard does not address, for receiver categories 2 and 3 as defined in Table 5, the requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 440-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 454-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 487 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Receive-Only Mobile Earth Stations (ROMES) providing data communications operating in the 1,5 GHz frequency band; Radio Frequency (RF) specifications covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 300 674-2-2 V2.1.1 Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHz to 5 815 MHz frequency band; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Sub-part 2: On-Board Units (OBU) |
This is the first publication |
|
|
Article 3(2) |
|
ETSI |
EN 300 676-2 V2.1.1 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 300 698 V2.1.1 Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 300 698 V2.2.1 Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
15.12.2017 |
EN 300 698 V2.1.1 Note 2.1 |
31.5.2018 |
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 300 718-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 300 718-2 V2.1.1 Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services |
This is the first publication |
EN 300 718-3 V1.2.1 Note 2.1 |
30.9.2019 |
Article 3(3)(g) |
|
ETSI |
EN 300 718-3 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(3)(g) |
|
ETSI |
EN 300 720 V2.1.1 Ultra-High Frequency (UHF) on-board vessels communications systems and equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 025 V2.1.1 VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
12.8.2016 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 301 025 V2.2.1 VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.4.2017 |
EN 301 025 V2.1.1 Note 2.1 |
30.11.2018 |
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 301 091-2 V1.3.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 166 V2.1.1 Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 178 V2.2.2 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 357 V2.1.1 Cordless audio devices in the range 25 MHz to 2 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
14.7.2017 |
EN 301 357-2 V1.4.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 301 357-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless audio devices in the range 25 MHz to 2 000 MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 360 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 29,5 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 406 V2.2.2 Digital Enhanced Cordless Telecommunications (DECT); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 426 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Low data rate Land Mobile satellite Earth Stations (LMES) and Maritime Mobile satellite Earth Stations (MMES) not intended for distress and safety communications operating in the 1,5 GHz/1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 427 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for low data rate Mobile satellite Earth Stations (MES) except aeronautical mobile satellite earth stations, operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 428 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 430 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite News Gathering Transportable Earth Stations (SNG TES) operating in the 11 GHz to 12 GHz/13 GHz to 14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 441 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1,6 GHz/2,4 GHz frequency band under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 442 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for NGSO Mobile Earth Stations (MES) including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 443 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 444 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Land Mobile Earth Stations (LMES) providing voice and/or data communications, operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 447 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 459 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 473 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Aircraft Earth Stations (AES) providing Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS), operating in the frequency band below 3 GHz covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 502 V12.5.2 Global System for Mobile communications (GSM); Base Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 511 V9.0.2 Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC) |
12.4.2017 |
|
|
Article 3(2) |
|
Notice: This harmonised standard provides presumption of conformity with the essential requirements of Directive 2014/53/EU if also the receiving parameters in clause(s) 4.2.20, 4.2.21 and 4.2.26 are applied |
|||||
|
ETSI |
EN 301 511 V12.5.1 Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
9.2.2018 |
EN 301 511 V9.0.2 Note 2.1 |
30.4.2019 |
Article 3(2) |
|
ETSI |
EN 301 559 V2.1.1 Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) and associated Peripherals (LP-AMI-P) operating in the frequency range 2 483,5 MHz to 2 500 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 598 V1.1.1 White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 681 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) under the Mobile Satellite Service (MSS), operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 721 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz frequency band covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 783 V2.1.1 Commercially available amateur radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 839 V2.1.1 Ultra Low Power Active Medical Implants (ULP-AMI) and associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.7.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 841-3 V2.1.1 VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 842-5 V2.1.1 VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 5: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 893 V1.8.1 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 301 893 V2.1.1 5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 301 893 V1.8.1 Note 2.1 |
12.6.2018 |
Article 3(2) |
|
As regards adaptivity, until 12.6.2018, either clause 4.2.7 of this harmonised standard or clause 4.8 of harmonised standard EN 301 893 v1.8.1 may be used; after that date, only clause 4.2.7 of this harmonised standard may be used. |
|||||
|
ETSI |
EN 301 908-1 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common requirements |
9.12.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-2 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-2 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) |
13.10.2017 |
EN 301 908-2 V11.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 301 908-3 V11.1.3 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-10 V4.2.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonised Standard for IMT-2000, FDMA/TDMA (DECT) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-11 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 11: CDMA Direct Spread (UTRA FDD) Repeaters |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-12 V7.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 12: CDMA Multi-Carrier (cdma2000) Repeaters |
9.9.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-13 V11.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-13 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) |
13.10.2017 |
EN 301 908-13 V11.1.1 Note 2.1 |
28.2.2019 |
Article 3(2) |
|
ETSI |
EN 301 908-14 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-15 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters |
10.2.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-18 V11.1.2 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-19 V6.3.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 19: OFDMA TDD WMAN (Mobile WiMAXTM) TDD User Equipment (UE) |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-20 V6.3.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 20: OFDMA TDD WMAN (Mobile WiMAXTM) TDD Base Stations (BS) |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-21 V6.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 21: OFDMA TDD WMAN (Mobile WiMAXTM) FDD User Equipment (UE) |
14.10.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-22 V6.1.1 IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 22: OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS) |
9.12.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 301 929 V2.1.1 VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 017 V2.1.1 Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 018 V2.1.1 Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 302 018-2 V1.2.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
|
ETSI |
EN 302 018-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 054 V2.1.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
15.12.2017 |
EN 302 054-2 V1.2.1 Note 2.1 |
31.5.2018 |
Article 3(2) |
|
ETSI |
EN 302 054 V2.2.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard for access to radio spectrum |
This is the first publication |
EN 302 054 V2.1.1 Note 2.1 |
31.10.2018 |
Article 3(2) |
|
ETSI |
EN 302 054-2 V1.2.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 064-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 065-1 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Requirements for Generic UWB applications |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 065-2 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Requirements for UWB location tracking |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 065-3 V2.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: Requirements for UWB devices for ground based vehicular applications |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 065-4 V1.1.1 Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 4: Material Sensing devices using UWB technology below 10,6 GHz |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 066-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall-Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 077-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Terrestrial — Digital Audio Broadcasting (T-DAB) service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 186 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 194-2 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 195 V2.1.1 Short Range Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and accessories (ULP-AMI-P) operating in the frequency range 9 kHz to 315 kHz Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 302 208 V3.1.1 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 217-2 V3.1.1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
EN 302 217-2-2 V2.2.1 Note 2.1 |
31.12.2018 |
Article 3(2) |
|
ETSI |
EN 302 217-2-2 V2.2.1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-2: Digital systems operating in frequency bands where frequency coordination is applied; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
Notice: This harmonised standard provides presumption of conformity with the essential requirements of Directive 2014/53/EU if also the receiving parameters in clause(s) 4.3.1, 4.3.2, 4.3.3 and 4.3.4 are applied |
|||||
|
ETSI |
EN 302 245-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Digital Radio Mondiale (DRM) broadcasting service Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 248 V2.1.1 Navigation radar for use on non-SOLAS vessels; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 264-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar equipment operating in the 77 GHz to 81 GHz band; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 288-2 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 296-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 326-2 V1.2.2 Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 340 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 372 V2.1.1 Short Range Devices (SRD); Tank Level Probing Radar (TLPR) equipment operating in the frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz, 24,05 GHz to 27 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 448 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for tracking Earth Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 454 V2.1.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
15.12.2017 |
EN 302 454-2 V1.2.1 Note 2.1 |
31.5.2018 |
Article 3(2) |
|
ETSI |
EN 302 454-2 V1.2.1 Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 480 V2.1.2 Mobile Communication On Board Aircraft (MCOBA) systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
10.3.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 502 V2.1.1 Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 510-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low Power Active Medical Membrane Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 536-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 537 V2.1.1 Ultra Low Power Medical Data Service (MEDS) Systems operating in the frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 561 V2.1.1 Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 567 V1.2.1 Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 571 V2.1.1 Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 574-1 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Complementary Ground Component (CGC) for wideband systems |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 574-2 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: User Equipment (UE) for wideband systems |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 574-3 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: User Equipment (UE) for narrowband systems |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 608 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment for Eurobalise railway systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 609 V2.1.1 Short Range Devices (SRD); Radio equipment for Euroloop railway systems; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
8.6.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 617-2 V2.1.1 Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 686 V1.1.1 Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 63 GHz to 64 GHz frequency band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 729 V2.1.1 Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 302 752 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Active radar target enhancers; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 858-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Automotive radar equipment operating in the 24,05 GHz up to 24,25 GHz or 24,50 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
ETSI |
EN 302 885 V2.1.1 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 302 885 V2.2.2 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.4.2017 |
EN 302 885 V2.1.1 Note 2.1 |
31.12.2018 |
Article 3(2);Article 3(3)(g) |
|
ETSI |
EN 302 885 V2.2.3 Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
12.5.2017 |
EN 302 885 V2.2.2 Note 2.1 |
31.1.2019 |
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 302 961 V2.1.2 Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and rescue purposes only; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 302 977 V2.1.1 Satellite Earth Stations and Systems (SES); Harmonised Standard for Vehicle-Mounted Earth Stations (VMES) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 039 V2.1.2 Land Mobile Service; Multichannel transmitter specification for the PMR Service; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 084 V2.1.1 Ground Based Augmentation System (GBAS) VHF ground-air Data Broadcast (VDB); Technical characteristics and methods of measurement for ground-based equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 098 V2.1.1 Maritime low power personal locating devices employing AIS; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 132 V1.1.1 Maritime low power VHF personal locating beacons employing Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 135 V2.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Coastal Surveillance, Vessel Traffic Services and Harbour Radars (CS/VTS/HR); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 203 V2.1.1 Short Range Devices (SRD); Medical Body Area Network Systems (MBANSs) operating in the 2 483,5 MHz to 2 500 MHz range; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
12.8.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 204 V2.1.2 Network Based Short Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 213-6-1 V2.1.1 Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 276 V1.1.1 Maritime Broadband Radiolink operating within the bands 5 852 MHz to 5 872 MHz and/or 5 880 MHz to 5 900 MHz for ships and off-shore installations engaged in coordinated activities; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
15.12.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 339 V1.1.1 Broadband Direct Air-to-Ground Communications; Equipment operating in the 1 900 MHz to 1 920 MHz and 5 855 MHz to 5 875 MHz frequency bands; Fixed pattern antennas; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 340 V1.1.2 Digital Terrestrial TV Broadcast Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 354 V1.1.1 Amplifiers and active antennas for TV broadcast reception in domestic premises; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.5.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 372-1 V1.1.1 Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Outdoor unit receiving in the 10,7 GHz to 12,75 GHz frequency band |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 372-2 V1.1.1 Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Indoor unit |
9.9.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 402 V2.1.2 Maritime mobile transmitters and receivers for use in the MF and HF bands; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU |
13.10.2017 |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 303 406 V1.1.1 Short Range Devices (SRD); Social Alarms Equipment operating in the frequency range 25 MHz to 1 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
12.4.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 413 V1.1.1 Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
15.12.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 609 V12.5.1 Global System for Mobile communications (GSM); GSM Repeaters; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
13.1.2017 |
|
|
Article 3(2) |
|
ETSI |
EN 303 978 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 303 979 V2.1.2 Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in non-geostationary orbit, operating in the 27,5 GHz to 29,1 GHz and 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
11.11.2016 |
|
|
Article 3(2) |
|
ETSI |
EN 305 550-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
8.6.2017 |
|
|
Article 3(2) |
|
This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters. |
|||||
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No: 1025/2012 (4). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union under Directive 1999/5/EC and Directive 2014/53/EU. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) OJ L 153, 22.5.2014, p. 62.
(3) ESO: European standardisation organisation:
|
— |
CEN: Rue de la Science 23, 1040 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel. +32 25500811. Fax +32 25500819 (http://www.cen.eu) |
|
— |
CENELEC: Rue de la Science 23, 1040 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel. +32 25500811. Fax +32 25500819 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, FRANCE. Tel. +33 492944200. Fax +33 493654716 (http://www.etsi.eu) |
(4) OJ C 338, 27.9.2014, p. 31.
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 92/139 |
Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
The provisions of Regulation (EU) No 305/2011 prevail over any conflicting provisions in the harmonised standards
(Text with EEA relevance)
(2018/C 092/06)
|
ESO (1) |
Reference and title of the standard (and reference document) |
Reference of superseded standard |
Date of applicability of the standard as a harmonised standard |
Date of the end of the co-existence period |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 1:1998 Flued oil stoves with vaporizing burners |
|
1.1.2008 |
1.1.2009 |
|
|
EN 1:1998/A1:2007 |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 40-4:2005 Lighting columns — Part 4: Requirements for reinforced and prestressed concrete lighting columns |
|
1.10.2006 |
1.10.2007 |
|
|
EN 40-4:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 40-5:2002 Lighting columns — Part 5: Requirements for steel lighting columns |
|
1.2.2003 |
1.2.2005 |
|
CEN |
EN 40-6:2002 Lighting columns — Part 6: Requirements for aluminium lighting columns |
|
1.2.2003 |
1.2.2005 |
|
CEN |
EN 40-7:2002 Lighting columns — Part 7: Requirements for fibre reinforced polymer composite lighting columns |
|
1.10.2003 |
1.10.2004 |
|
CEN |
EN 54-2:1997 Fire detection and fire alarm systems — Part 2: Control and indicating equipment |
|
1.1.2008 |
1.8.2009 |
|
|
EN 54-2:1997/AC:1999 |
|
1.1.2008 |
1.1.2008 |
|
|
EN 54-2:1997/A1:2006 |
|
1.1.2008 |
1.8.2009 |
|
CEN |
EN 54-3:2001 Fire detection and fire alarm systems — Part 3: Fire alarm devices — Sounders |
|
1.4.2003 |
1.6.2009 |
|
|
EN 54-3:2001/A2:2006 |
|
1.3.2007 |
1.6.2009 |
|
|
EN 54-3:2001/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
CEN |
EN 54-4:1997 Fire detection and fire alarm systems — Part 4: Power supply equipment |
|
1.10.2003 |
1.8.2009 |
|
|
EN 54-4:1997/AC:1999 |
|
1.6.2005 |
1.6.2005 |
|
|
EN 54-4:1997/A1:2002 |
|
1.10.2003 |
1.8.2009 |
|
|
EN 54-4:1997/A2:2006 |
|
1.6.2007 |
1.8.2009 |
|
CEN |
EN 54-5:2000 Fire detection and fire alarm systems — Part 5: Heat detectors — Point detectors |
|
1.4.2003 |
30.6.2005 |
|
|
EN 54-5:2000/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
CEN |
EN 54-7:2000 Fire detection and fire alarm systems — Part 7: Smoke detectors — Point detectors using scattered light, transmitted light or ionization |
|
1.4.2003 |
1.8.2009 |
|
|
EN 54-7:2000/A2:2006 |
|
1.5.2007 |
1.8.2009 |
|
|
EN 54-7:2000/A1:2002 |
|
1.4.2003 |
30.6.2005 |
|
CEN |
EN 54-10:2002 Fire detection and fire alarm systems — Part 10: Flame detectors — Point detectors |
|
1.9.2006 |
1.9.2008 |
|
|
EN 54-10:2002/A1:2005 |
|
1.9.2006 |
1.9.2008 |
|
CEN |
EN 54-11:2001 Fire detection and fire alarm systems — Part 11: Manual call points |
|
1.9.2006 |
1.9.2008 |
|
|
EN 54-11:2001/A1:2005 |
|
1.9.2006 |
1.9.2008 |
|
CEN |
EN 54-12:2015 Fire detection and fire alarm systems — Part 12: Smoke detectors — Line detectors using an optical beam |
EN 54-12:2002 |
8.4.2016 |
8.4.2019 |
|
CEN |
EN 54-16:2008 Fire detection and fire alarm systems — Part 16: Voice alarm control and indicating equipment |
|
1.1.2009 |
1.4.2011 |
|
CEN |
EN 54-17:2005 Fire detection and fire alarm systems — Part 17: Short-circuit isolators |
|
1.10.2006 |
1.12.2008 |
|
|
EN 54-17:2005/AC:2007 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 54-18:2005 Fire detection and fire alarm systems — Part 18: Input/output devices |
|
1.10.2006 |
1.12.2008 |
|
|
EN 54-18:2005/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 54-20:2006 Fire detection and fire alarm systems — Part 20: Aspirating smoke detectors |
|
1.4.2007 |
1.7.2009 |
|
|
EN 54-20:2006/AC:2008 |
|
1.8.2009 |
1.8.2009 |
|
CEN |
EN 54-21:2006 Fire detection and fire alarm systems — Part 21: Alarm transmission and fault warning routing equipment |
|
1.3.2007 |
1.6.2009 |
|
CEN |
EN 54-23:2010 Fire detection and fire alarm systems — Part 23: Fire alarm devices — Visual alarm devices |
|
1.12.2010 |
31.12.2013 |
|
CEN |
EN 54-24:2008 Fire detection and fire alarm systems — Part 24: Components of voice alarm systems — Loudspeakers |
|
1.1.2009 |
1.4.2011 |
|
CEN |
EN 54-25:2008 Fire detection and fire alarm systems — Part 25: Components using radio links |
|
1.1.2009 |
1.4.2011 |
|
|
EN 54-25:2008/AC:2012 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 179:2008 Building hardware — Emergency exit devices operated by a lever handle or push pad, for use on escape routes — Requirements and test methods |
EN 179:1997 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 197-1:2011 Cement — Part 1: Composition, specifications and conformity criteria for common cements |
EN 197-1:2000 EN 197-4:2004 |
1.7.2012 |
1.7.2013 |
|
CEN |
EN 295-1:2013 Vitrified clay pipe systems for drains and sewers — Part 1: Requirements for pipes, fittings and joints |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-4:2013 Vitrified clay pipe systems for drains and sewers — Part 4: Requirements for adaptors, connectors and flexible couplings |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-5:2013 Vitrified clay pipe systems for drains and sewers — Part 5: Requirements for perforated pipes and fittings |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-6:2013 Vitrified clay pipes systems for drain and sewers — Part 6: Requirements for components of manholes and inspection chambers |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 295-7:2013 Vitrified clay pipe systems for drains and sewers — Part 7: Requirements for pipes and joints for pipe jacking |
EN 295-10:2005 |
1.11.2013 |
1.11.2014 |
|
CEN |
EN 331:1998 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
|
1.9.2011 |
1.9.2012 |
|
|
EN 331:1998/A1:2010 |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 413-1:2011 Masonry cement — Part 1: Composition, specifications and conformity criteria |
EN 413-1:2004 |
1.2.2012 |
1.2.2013 |
|
CEN |
EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use — Part 1: Safety |
|
1.12.2009 |
1.12.2010 |
|
CEN |
EN 438-7:2005 High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
|
1.11.2005 |
1.11.2006 |
|
CEN |
EN 442-1:2014 Radiators and convectors — Part 1: Technical specifications and requirements |
EN 442-1:1995 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 450-1:2012 Fly ash for concrete — Part 1: Definition, specifications and conformity criteria |
EN 450-1:2005+A1:2007 |
1.5.2013 |
1.5.2014 |
|
CEN |
EN 459-1:2010 Building lime — Part 1: Definitions, specifications and conformity criteria |
EN 459-1:2001 |
1.6.2011 |
1.6.2012 |
|
CEN |
EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding — Product specifications |
EN 490:2004 |
1.8.2012 |
1.8.2012 |
|
CEN |
EN 492:2012 Fibre-cement slates and fittings — Product specification and test methods |
EN 492:2004 |
1.7.2013 |
1.7.2013 |
|
CEN |
EN 494:2012+A1:2015 Fibre-cement profiled sheets and fittings — Product specification and test methods |
EN 494:2012 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 516:2006 Prefabricated accessories for roofing — Installations for roof access — Walkways, treads and steps |
|
1.11.2006 |
1.11.2007 |
|
CEN |
EN 517:2006 Prefabricated accessories for roofing — Roof safety hooks |
|
1.12.2006 |
1.12.2007 |
|
CEN |
EN 520:2004+A1:2009 Gypsum plasterboards — Definitions, requirements and test methods |
EN 520:2004 |
1.6.2010 |
1.12.2010 |
|
CEN |
EN 523:2003 Steel strip sheaths for prestressing tendons — Terminology, requirements, quality control |
|
1.6.2004 |
1.6.2005 |
|
CEN |
EN 534:2006+A1:2010 Corrugated bitumen sheets — Product specification and test methods |
EN 534:2006 |
1.1.2011 |
1.1.2011 |
|
CEN |
EN 544:2011 Bitumen shingles with mineral and/or synthetic reinforcements — Product specification and test methods |
EN 544:2005 |
1.4.2012 |
1.4.2012 |
|
CEN |
EN 572-9:2004 Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 588-2:2001 Fibre cement pipes for drains and sewers — Part 2: Manholes and inspection chambers |
|
1.10.2002 |
1.10.2003 |
|
CEN |
EN 598:2007+A1:2009 Ductile iron pipes, fittings, accessories and their joints for sewerage applications — Requirements and test methods |
EN 598:2007 |
1.4.2010 |
1.4.2011 |
|
CEN |
EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 671-1:2012 Fixed firefighting systems — Hose systems — Part 1: Hose reels with semi-rigid hose |
EN 671-1:2001 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 671-2:2012 Fixed firefighting systems — Hose systems — Part 2: Hose systems with lay-flat hose |
EN 671-2:2001 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 681-1:1996 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber |
|
1.1.2003 |
1.1.2009 |
|
|
EN 681-1:1996/A2:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-1:1996/A3:2005 |
|
1.1.2008 |
1.1.2009 |
|
|
EN 681-1:1996/A1:1998 |
|
1.1.2003 |
1.1.2004 |
|
CEN |
EN 681-2:2000 Elastomeric Seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 2: Thermoplastic elastomers |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-2:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-2:2000/A2:2005 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 681-3:2000 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 3: Cellular materials of vulcanized rubber |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-3:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-3:2000/A2:2005 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 681-4:2000 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 4: Cast polyurethane sealing elements |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-4:2000/A1:2002 |
|
1.1.2003 |
1.1.2004 |
|
|
EN 681-4:2000/A2:2005 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 682:2002 Elastomeric Seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
|
1.10.2002 |
1.12.2003 |
|
|
EN 682:2002/A1:2005 |
|
1.7.2012 |
1.7.2012 |
|
CEN |
EN 771-1:2011+A1:2015 Specification for masonry units — Part 1: Clay masonry units |
EN 771-1:2011 |
10.6.2016 |
10.6.2017 |
|
CEN |
EN 771-2:2011+A1:2015 Specification for masonry units — Part 2: Calcium silicate masonry units |
EN 771-2:2011 |
10.6.2016 |
10.6.2017 |
|
CEN |
EN 771-3:2011+A1:2015 Specification for masonry units — Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates) |
EN 771-3:2011 |
10.6.2016 |
10.6.2017 |
|
CEN |
EN 771-4:2011+A1:2015 Specification for masonry units — Part 4: Autoclaved aerated concrete masonry units |
EN 771-4:2011 |
10.6.2016 |
10.6.2017 |
|
CEN |
EN 771-5:2011+A1:2015 Specification for masonry units — Part 5: Manufactured stone masonry units |
EN 771-5:2011 |
10.6.2016 |
10.6.2017 |
|
CEN |
EN 771-6:2011+A1:2015 Specification for masonry units — Part 6: Natural stone masonry units |
EN 771-6:2011 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 1: System D — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 2: System E — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use — Part 3: System F — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 4: System H — Safety |
|
1.11.2009 |
1.11.2010 |
|
CEN |
EN 778:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 845-1:2013+A1:2016 Specification for ancillary components for masonry — Part 1: Wall ties, tension straps, hangers and brackets |
EN 845-1:2013 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 845-2:2013+A1:2016 Specification for ancillary components for masonry — Part 2: Lintels |
EN 845-2:2013 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 845-3:2013+A1:2016 Specification for ancillary components for masonry — Part 3: Bed joint reinforcement of steel meshwork |
EN 845-3:2013 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) — Part 1: Principles of product design, performance and testing, marking and quality control |
|
1.9.2005 |
1.9.2006 |
|
|
EN 858-1:2002/A1:2004 |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 877:1999 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings — Requirements, test methods and quality assurance |
|
1.1.2008 |
1.9.2009 |
|
|
EN 877:1999/A1:2006 |
|
1.1.2008 |
1.9.2009 |
|
|
EN 877:1999/A1:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures — Definitions, requirements, conformity, marking and labelling |
EN 934-2:2009 |
1.3.2013 |
1.9.2013 |
|
CEN |
EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout — Part 3: Admixtures for masonry mortar — Definitions, requirements, conformity and marking and labelling |
EN 934-3:2009 |
1.3.2013 |
1.9.2013 |
|
CEN |
EN 934-4:2009 Admixtures for concrete, mortar and grout — Part 4: Admixtures for grout for prestressing tendons — Definitions, requirements, conformity, marking and labelling |
EN 934-4:2001 |
1.3.2010 |
1.3.2011 |
|
CEN |
EN 934-5:2007 Admixtures for concrete, mortar and grout — Part 5: Admixtures for sprayed concrete — Definitions, requirements, conformity, marking and labelling |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 969:2009 Ductile iron pipes, fittings, accessories and their joints for gas pipelines — Requirements and test methods |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 997:2012 WC pans and WC suites with integral trap |
EN 997:2003 |
1.12.2012 |
1.6.2013 |
|
|
EN 997:2012/AC:2012 |
|
1.3.2013 |
1.3.2013 |
|
CEN |
EN 998-1:2016 Specification for mortar for masonry — Part 1: Rendering and plastering mortar |
EN 998-1:2010 |
11.8.2017 |
11.8.2018 |
|
CEN |
EN 998-2:2016 Specification for mortar for masonry — Part 2: Masonry mortar |
EN 998-2:2010 |
11.8.2017 |
11.8.2018 |
|
CEN |
EN 1013:2012+A1:2014 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings — Requirements and test methods |
EN 1013:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 1036-2:2008 Glass in building — Mirrors from silver-coated float glass for internal use — Part 2: Evaluation of conformity; product standard |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1051-2:2007 Glass in building — Glass blocks and glass pavers — Part 2: Evaluation of conformity/Product standard |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1057:2006+A1:2010 Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN 1057:2006 |
1.12.2010 |
1.12.2010 |
|
CEN |
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures — Part 1: Requirements for conformity assessment of structural components |
EN 1090-1:2009 |
1.9.2012 |
1.7.2014 |
|
CEN |
EN 1096-4:2004 Glass in building — Coated glass — Part 4: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1123-1:1999 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control |
|
1.6.2005 |
1.6.2006 |
|
|
EN 1123-1:1999/A1:2004 |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 1124-1:1999 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 1: Requirements, testing, quality control |
|
1.6.2005 |
1.6.2006 |
|
|
EN 1124-1:1999/A1:2004 |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 1125:2008 Building hardware — Panic exit devices operated by a horizontal bar, for use on escape routes — Requirements and test methods |
EN 1125:1997 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1154:1996 Building hardware — Controlled door closing devices — Requirements and test methods |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1154:1996/A1:2002 |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1154:1996/A1:2002/AC:2006 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 1155:1997 Building hardware — Electrically powered hold-open devices for swing doors — Requirements and test methods |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1155:1997/A1:2002 |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1155:1997/A1:2002/AC:2006 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 1158:1997 Building hardware — Door coordinator devices — Requirements and test methods |
|
1.10.2003 |
1.10.2004 |
|
|
EN 1158:1997/A1:2002/AC:2006 |
|
1.6.2006 |
1.6.2006 |
|
|
EN 1158:1997/A1:2002 |
|
1.10.2003 |
1.10.2004 |
|
CEN |
EN 1168:2005+A3:2011 Precast concrete products — Hollow core slabs |
EN 1168:2005+A2:2009 |
1.7.2012 |
1.7.2013 |
|
CEN |
EN 1279-5:2005+A2:2010 Glass in building — Insulating glass units — Part 5: Evaluation of conformity |
EN 1279-5:2005+A1:2008 |
1.2.2011 |
1.2.2012 |
|
CEN |
EN 1304:2005 Clay roofing tiles and fittings — Product definitions and specifications |
|
1.2.2006 |
1.2.2007 |
|
CEN |
EN 1317-5:2007+A2:2012 Road restraint systems — Part 5: Product requirements and evaluation of conformity for vehicle restraint systems |
EN 1317-5:2007+A1:2008 |
1.1.2013 |
1.1.2013 |
|
|
EN 1317-5:2007+A2:2012/AC:2012 |
|
1.3.2013 |
1.3.2013 |
|
CEN |
EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
|
1.10.2010 |
1.10.2011 |
|
CEN |
EN 1337-3:2005 Structural bearings — Part 3: Elastomeric bearings |
|
1.1.2006 |
1.1.2007 |
|
CEN |
EN 1337-4:2004 Structural bearings — Part 4: Roller bearings |
|
1.2.2005 |
1.2.2006 |
|
|
EN 1337-4:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 1337-5:2005 Structural bearings — Part 5: Pot bearings |
|
1.1.2006 |
1.1.2007 |
|
CEN |
EN 1337-6:2004 Structural bearings — Part 6: Rocker bearings |
|
1.2.2005 |
1.2.2006 |
|
CEN |
EN 1337-7:2004 Structural bearings — Part 7: Spherical and cylindrical PTFE bearings |
EN 1337-7:2000 |
1.12.2004 |
1.6.2005 |
|
CEN |
EN 1337-8:2007 Structural bearings — Part 8: Guide Bearings and Restraint Bearings |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 1338:2003 Concrete paving blocks — Requirements and test methods |
|
1.3.2004 |
1.3.2005 |
|
|
EN 1338:2003/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1339:2003 Concrete paving flags — Requirements and test methods |
|
1.3.2004 |
1.3.2005 |
|
|
EN 1339:2003/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1340:2003 Concrete kerb units — Requirements and test methods |
|
1.2.2004 |
1.2.2005 |
|
|
EN 1340:2003/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1341:2012 Slabs of natural stone for external paving — Requirements and test methods |
EN 1341:2001 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 1342:2012 Setts of natural stone for external paving — Requirements and test methods |
EN 1342:2001 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 1343:2012 Kerbs of natural stone for external paving — Requirements and test methods |
EN 1343:2001 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 1344:2013 Clay pavers — Requirements and test methods |
EN 1344:2002 |
8.8.2014 |
8.8.2016 |
|
|
EN 1344:2013/AC:2015 |
|
|
|
|
CEN |
EN 1423:2012 Road marking materials — Drop on materials — Glass beads, antiskid aggregates and mixtures of the two |
EN 1423:1997 |
1.11.2012 |
1.11.2012 |
|
|
EN 1423:2012/AC:2013 |
|
1.7.2013 |
1.7.2013 |
|
CEN |
EN 1433:2002 Drainage channels for vehicular and pedestrian areas — Classification, design and testing requirements, marking and evaluation of conformity |
|
1.8.2003 |
1.8.2004 |
|
|
EN 1433:2002/A1:2005 |
|
1.1.2006 |
1.1.2006 |
|
CEN |
EN 1457-1:2012 Chimneys — Clay/ceramic flue liners — Part 1: Flue liners operating under dry conditions — Requirements and test methods |
EN 1457:1999 |
1.11.2012 |
1.11.2013 |
|
CEN |
EN 1457-2:2012 Chimneys — Clay/ceramic flue liners — Part 2: Flue liners operating under wet conditions — Requirements and test methods |
EN 1457:1999 |
1.11.2012 |
1.11.2013 |
|
CEN |
EN 1463-1:2009 Road marking materials — Retroreflecting road studs — Part 1: Initial performance requirements |
EN 1463-1:1997 |
1.1.2010 |
1.1.2011 |
|
CEN |
EN 1469:2015 Natural stone products — Slabs for cladding — Requirements |
EN 1469:2004 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 2: Surface protection systems for concrete |
|
1.9.2005 |
1.1.2009 |
|
CEN |
EN 1504-3:2005 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 3: Structural and non-structural repair |
|
1.10.2006 |
1.1.2009 |
|
CEN |
EN 1504-4:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 4: Structural bonding |
|
1.9.2005 |
1.1.2009 |
|
CEN |
EN 1504-5:2004 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 5: Concrete injection |
|
1.10.2005 |
1.1.2009 |
|
CEN |
EN 1504-6:2006 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 6: Anchoring of reinforcing steel bar |
|
1.6.2007 |
1.1.2009 |
|
CEN |
EN 1504-7:2006 Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 7: Reinforcement corrosion protection |
|
1.6.2007 |
1.1.2009 |
|
CEN |
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
EN 1520:2002 |
1.1.2012 |
1.1.2013 |
|
CEN |
EN 1748-1-2:2004 Glass in building — Special basic products — Borosilicate glasses — Part 1-2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1748-2-2:2004 Glass in building — Special basic products — Glass ceramics — Part 2-2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1806:2006 Chimneys — Clay/ceramic flue blocks for single wall chimneys — Requirements and test methods |
|
1.5.2007 |
1.5.2008 |
|
CEN |
EN 1825-1:2004 Grease separators — Part 1: Principles of design, performance and testing, marking and quality control |
|
1.9.2005 |
1.9.2006 |
|
|
EN 1825-1:2004/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 1856-1:2009 Chimneys — Requirements for metal chimneys — Part 1: System chimney products |
EN 1856-1:2003 |
1.3.2010 |
1.3.2011 |
|
CEN |
EN 1856-2:2009 Chimneys — Requirements for metal chimneys — Part 2: Metal flue liners and connecting flue pipes |
EN 1856-2:2004 |
1.3.2010 |
1.3.2011 |
|
CEN |
EN 1857:2010 Chimneys — Components — Concrete flue liners |
EN 1857:2003+A1:2008 |
1.1.2011 |
1.1.2012 |
|
CEN |
EN 1858:2008+A1:2011 Chimneys — Components — Concrete flue blocks |
EN 1858:2008 |
1.4.2012 |
1.4.2013 |
|
CEN |
EN 1863-2:2004 Glass in building — Heat strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 1873:2005 Prefabricated accessories for roofing — Individual roof lights of plastics — Product specification and test methods |
|
1.10.2006 |
1.10.2009 |
|
CEN |
EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
|
1.8.2003 |
23.11.2004 |
|
|
EN 1916:2002/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
|
1.8.2003 |
23.11.2004 |
|
|
EN 1917:2002/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 1935:2002 Building hardware — Single-axis hinges — Requirements and test methods |
|
1.10.2002 |
1.12.2003 |
|
|
EN 1935:2002/AC:2003 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 10025-1:2004 Hot rolled products of structural steels — Part 1: General technical delivery conditions |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 10088-4:2009 Stainless steels — Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
|
1.2.2010 |
1.2.2011 |
|
CEN |
EN 10088-5:2009 Stainless steels — Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 10210-1:2006 Hot finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 10219-1:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions |
|
1.4.2006 |
1.4.2007 |
|
|
EN 10224:2002/A1:2005 |
|
1.4.2006 |
1.4.2007 |
|
CEN |
EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading — Technical delivery conditions |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 10311:2005 Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 10312:2002 Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption — Technical delivery conditions |
|
1.4.2006 |
1.4.2007 |
|
|
EN 10312:2002/A1:2005 |
|
1.4.2006 |
1.4.2007 |
|
CEN |
EN 10340:2007 Steel castings for structural uses |
|
1.1.2010 |
1.1.2011 |
|
|
EN 10340:2007/AC:2008 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 10343:2009 Steels for quenching and tempering for construction purposes — Technical delivery conditions |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 12004:2007+A1:2012 Adhesives for tiles — Requirements, evaluation of conformity, classification and designation |
EN 12004:2007 |
1.4.2013 |
1.7.2013 |
|
CEN |
EN 12050-1:2001 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 1: Lifting plants for wastewater containing faecal matter |
|
1.11.2001 |
1.11.2002 |
|
CEN |
EN 12050-2:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 2: Lifting plants for faecal-free wastewater |
|
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12050-3:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 3: Lifting plants for wastewater containing faecal matter for limited applications |
|
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12050-4:2000 Wastewater lifting plants for buildings and sites — Principles of construction and testing — Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
|
1.10.2001 |
1.10.2002 |
|
CEN |
EN 12057:2004 Natural stone products — Modular tiles — Requirements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12058:2004 Natural stone products — Slabs for floors and stairs — Requirements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12094-1:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 1: Requirements and test methods for electrical automatic control and delay devices |
|
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-2:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 2: Requirements and test methods for non-electrical automatic control and delay devices |
|
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-3:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 3: Requirements and test methods for manual triggering and stop devices |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-4:2004 Fixed firefighting systems — Components for gas extinguishing systems — Part 4: Requirements and test methods for container valve assemblies and their actuators |
|
1.5.2005 |
1.8.2007 |
|
CEN |
EN 12094-5:2006 Fixed firefighting systems — Components for gas extinguishing systems — Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
EN 12094-5:2000 |
1.2.2007 |
1.5.2009 |
|
CEN |
EN 12094-6:2006 Fixed firefighting systems — Components for gas extinguishing systems — Part 6: Requirements and test methods for non-electrical disable devices |
EN 12094-6:2000 |
1.2.2007 |
1.5.2009 |
|
CEN |
EN 12094-7:2000 Fixed firefighting systems — Components for gas extinguishing systems — Part 7: Requirements and test methods for nozzles for CO2 systems |
|
1.10.2001 |
1.4.2004 |
|
|
EN 12094-7:2000/A1:2005 |
|
1.11.2005 |
1.11.2006 |
|
CEN |
EN 12094-8:2006 Fixed firefighting systems — Components for gas extinguishing systems — Part 8: Requirements and test methods for connectors |
|
1.2.2007 |
1.5.2009 |
|
CEN |
EN 12094-9:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 9: Requirements and test methods for special fire detectors |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-10:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 10: Requirements and test methods for pressure gauges and pressure switches |
|
1.2.2004 |
1.5.2006 |
|
CEN |
EN 12094-11:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 11: Requirements and test methods for mechanical weighing devices |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-12:2003 Fixed firefighting systems — Components for gas extinguishing systems — Part 12: Requirements and test methods for pneumatic alarm devices |
|
1.1.2004 |
1.9.2005 |
|
CEN |
EN 12094-13:2001 Fixed firefighting systems — Components for gas extinguishing systems — Part 13: Requirements and test methods for check valves and non-return valves |
|
1.1.2002 |
1.4.2004 |
|
|
EN 12094-13:2001/AC:2002 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 12101-1:2005 Smoke and heat control systems — Part 1: Specification for smoke barriers |
|
1.6.2006 |
1.9.2008 |
|
|
EN 12101-1:2005/A1:2006 |
|
1.12.2006 |
1.9.2008 |
|
CEN |
EN 12101-2:2003 Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators |
|
1.4.2004 |
1.9.2006 |
|
CEN |
EN 12101-3:2015 Smoke and heat control systems — Part 3: Specification for powered smoke and heat control ventilators (Fans) |
EN 12101-3:2002 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 12101-6:2005 Smoke and heat control systems — Part 6: Specification for pressure differential systems — Kits |
|
1.4.2006 |
1.4.2007 |
|
|
EN 12101-6:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 12101-7:2011 Smoke and heat control systems — Part 7: Smoke duct sections |
|
1.2.2012 |
1.2.2013 |
|
CEN |
EN 12101-8:2011 Smoke and heat control systems — Part 8: Smoke control dampers |
|
1.2.2012 |
1.2.2013 |
|
CEN |
EN 12101-10:2005 Smoke and heat control systems — Part 10: Power supplies |
|
1.10.2006 |
1.5.2012 |
|
|
EN 12101-10:2005/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 12150-2:2004 Glass in building — Thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12209:2003 Building hardware — Locks and latches — Mechanically operated locks, latches and locking plates — Requirements and test methods |
|
1.12.2004 |
1.6.2006 |
|
|
EN 12209:2003/AC:2005 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 12259-1:1999 + A1:2001 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 1: Sprinklers |
|
1.4.2002 |
1.9.2005 |
|
|
EN 12259-1:1999 + A1:2001/A2:2004 |
|
1.3.2005 |
1.3.2006 |
|
|
EN 12259-1:1999 + A1:2001/A3:2006 |
|
1.11.2006 |
1.11.2007 |
|
CEN |
EN 12259-2:1999 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 2: Wet alarm valve assemblies |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-2:1999/A1:2001 |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-2:1999/AC:2002 |
|
1.6.2005 |
1.6.2005 |
|
|
EN 12259-2:1999/A2:2005 |
|
1.9.2006 |
1.8.2007 |
|
CEN |
EN 12259-3:2000 Fixed firefighting systems — Components for automatic sprinkler and water spray systems — Part 3: Dry alarm valve assemblies |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-3:2000/A1:2001 |
|
1.1.2002 |
1.8.2007 |
|
|
EN 12259-3:2000/A2:2005 |
|
1.9.2006 |
1.8.2007 |
|
CEN |
EN 12259-4:2000 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 4: Water motor alarms |
|
1.1.2002 |
1.4.2004 |
|
|
EN 12259-4:2000/A1:2001 |
|
1.1.2002 |
1.4.2004 |
|
CEN |
EN 12259-5:2002 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 5: Water flow detectors |
|
1.7.2003 |
1.9.2005 |
|
CEN |
EN 12271:2006 Surface dressing — Requirements |
|
1.1.2008 |
1.1.2011 |
|
CEN |
EN 12273:2008 Slurry surfacing — Requirements |
|
1.1.2009 |
1.1.2011 |
|
CEN |
EN 12285-2:2005 Workshop fabricated steel tanks — Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
|
1.1.2006 |
1.1.2008 |
|
CEN |
EN 12326-1:2014 Slate and stone for discontinuous roofing and external cladding — Part 1: Specifications for slate and carbonate slate |
EN 12326-1:2004 |
13.2.2015 |
13.2.2016 |
|
CEN |
EN 12337-2:2004 Glass in building — Chemically strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12352:2006 Traffic control equipment — Warning and safety light devices |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 12368:2006 Traffic control equipment — Signal heads |
|
1.2.2007 |
1.2.2008 |
|
CEN |
EN 12380:2002 Air admittance valves for drainage systems — Requirements, tests methods and evaluation of conformity |
|
1.10.2003 |
1.10.2004 |
|
CEN |
EN 12446:2011 Chimneys — Components — Concrete outer wall elements |
EN 12446:2003 |
1.4.2012 |
1.4.2013 |
|
CEN |
EN 12467:2012 Fibre-cement flat sheets — Product specification and test methods |
EN 12467:2004 |
1.7.2013 |
1.7.2013 |
|
CEN |
EN 12566-1:2000 Small wastewater treatment systems for up to 50 PT — Part 1: Prefabricated septic tanks |
|
1.12.2004 |
1.12.2005 |
|
|
EN 12566-1:2000/A1:2003 |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 12566-3:2005+A2:2013 Small wastewater treatment systems for up to 50 PT — Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
EN 12566-3:2005+A1:2009 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 12566-4:2007 Small wastewater treatment systems for up to 50 PT — Part 4: Septic tanks assembled in situ from prefabricated kits |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12566-6:2013 Small wastewater treatment systems for up to 50 PT — Part 6: Prefabricated treatment units for septic tank effluent |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 12566-7:2013 Small wastewater treatment systems for up to 50 PT — Part 7: Prefabricated tertiary treatment units |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 12591:2009 Bitumen and bituminous binders — Specifications for paving grade bitumens |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 12602:2016 Prefabricated reinforced components of autoclaved aerated concrete |
EN 12602:2008+A1:2013 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 12620:2002+A1:2008 Aggregates for concrete |
EN 12620:2002 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12676-1:2000 Anti-glare systems for roads — Part 1: Performance and characteristics |
|
1.2.2004 |
1.2.2006 |
|
|
EN 12676-1:2000/A1:2003 |
|
1.2.2004 |
1.2.2006 |
|
CEN |
EN 12737:2004+A1:2007 Precast concrete products — Floor slats for livestock |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12764:2004+A1:2008 Sanitary appliances — Specification for whirlpool baths |
EN 12764:2004 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 12794:2005+A1:2007 Precast concrete products — Foundation piles |
EN 12794:2005 |
1.2.2008 |
1.2.2009 |
|
|
EN 12794:2005+A1:2007/AC:2008 |
|
1.8.2009 |
1.8.2009 |
|
CEN |
EN 12809:2001 Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 12809:2001/A1:2004 |
|
1.7.2005 |
1.7.2007 |
|
|
EN 12809:2001/A1:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
|
EN 12809:2001/AC:2006 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 12815:2001 Residential cookers fired by solid fuel — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 12815:2001/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
|
EN 12815:2001/A1:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
|
EN 12815:2001/A1:2004 |
|
1.7.2005 |
1.7.2007 |
|
CEN |
EN 12839:2012 Precast concrete products — Elements for fences |
EN 12839:2001 |
1.10.2012 |
1.10.2013 |
|
CEN |
EN 12843:2004 Precast concrete products — Masts and poles |
|
1.9.2005 |
1.9.2007 |
|
CEN |
EN 12859:2011 Gypsum blocks — Definitions, requirements and test methods |
EN 12859:2008 |
1.12.2011 |
1.12.2012 |
|
CEN |
EN 12860:2001 Gypsum based adhesives for gypsum blocks — Definitions, requirements and test methods |
|
1.4.2002 |
1.4.2003 |
|
|
EN 12860:2001/AC:2002 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 12878:2005 Pigments for the colouring of building materials based on cement and/or lime — Specifications and methods of test |
|
1.3.2006 |
1.3.2007 |
|
|
EN 12878:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 12899-1:2007 Fixed, vertical road traffic signs — Part 1: Fixed signs |
|
1.1.2009 |
1.1.2013 |
|
CEN |
EN 12899-2:2007 Fixed, vertical road traffic signs — Part 2: Transilluminated traffic bollards (TTB) |
|
1.1.2009 |
1.1.2013 |
|
CEN |
EN 12899-3:2007 Fixed, vertical road traffic signs — Part 3: Delineator posts and retroreflectors |
|
1.1.2009 |
1.1.2013 |
|
CEN |
EN 12951:2004 Prefabricated accessories for roofing — Permanently fixed roof ladders — Product specification and test methods |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 12966-1:2005+A1:2009 Road vertical signs — Variable message traffic signs — Part 1: Product standard |
|
1.8.2010 |
1.8.2010 |
|
CEN |
EN 13024-2:2004 Glass in building — Thermally toughened borosilicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13043:2002 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
|
1.7.2003 |
1.6.2004 |
|
|
EN 13043:2002/AC:2004 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 13055-1:2002 Lightweight aggregates — Part 1: Lightweight aggregates for concrete, mortar and grout |
|
1.3.2003 |
1.6.2004 |
|
|
EN 13055-1:2002/AC:2004 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 13055-2:2004 Lightweight aggregates — Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
|
1.5.2005 |
1.5.2006 |
|
CEN |
EN 13063-1:2005+A1:2007 Chimneys — System chimneys with clay/ceramic flue liners — Part 1: Requirements and test methods for sootfire resistance |
EN 13063-1:2005 |
1.5.2008 |
1.5.2009 |
|
CEN |
EN 13063-2:2005+A1:2007 Chimneys — System chimneys with clay/ceramic flue liners — Part 2: Requirements and test methods under wet conditions |
EN 13063-2:2005 |
1.5.2008 |
1.5.2009 |
|
CEN |
EN 13063-3:2007 Chimneys — System chimneys with clay/ceramic flue liners — Part 3: Requirements and test methods for air flue system chimneys |
|
1.5.2008 |
1.5.2009 |
|
CEN |
EN 13069:2005 Chimneys — Clay/ceramic outer walls for system chimneys — Requirements and test methods |
|
1.5.2006 |
1.5.2007 |
|
CEN |
EN 13084-5:2005 Free-standing chimneys — Part 5: Material for brick liners — Product specifications |
|
1.4.2006 |
1.4.2007 |
|
|
EN 13084-5:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 13084-7:2012 Free-standing chimneys — Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
EN 13084-7:2005 |
1.9.2013 |
1.9.2013 |
|
CEN |
EN 13101:2002 Steps for underground man entry chambers — Requirements, marking, testing and evaluation of conformity |
|
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13108-1:2006 Bituminous mixtures — Material specifications — Part 1: Asphalt Concrete |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-1:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-2:2006 Bituminous mixtures — Material specifications — Part 2: Asphalt Concrete for very thin layers |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-2:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-3:2006 Bituminous mixtures — Material specifications — Part 3: Soft Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-3:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-4:2006 Bituminous mixtures — Material specifications — Part 4: Hot Rolled Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-4:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-5:2006 Bituminous mixtures — Material specifications — Part 5: Stone Mastic Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-5:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-6:2006 Bituminous mixtures — Material specifications — Part 6: Mastic Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-6:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13108-7:2006 Bituminous mixtures — Material specifications — Part 7: Porous Asphalt |
|
1.3.2007 |
1.3.2008 |
|
|
EN 13108-7:2006/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 13139:2002 Aggregates for mortar |
|
1.3.2003 |
1.6.2004 |
|
|
EN 13139:2002/AC:2004 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 13160-1:2003 Leak detection systems — Part 1: General principles |
|
1.3.2004 |
1.3.2005 |
|
CEN |
EN 13162:2012+A1:2015 Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification |
EN 13162:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13163:2012+A1:2015 Thermal insulation products for buildings — Factory made expanded polystyrene (EPS) products — Specification |
EN 13163:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13164:2012+A1:2015 Thermal insulation products for buildings — Factory made extruded polystyrene foam (XPS) products — Specification |
EN 13164:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13165:2012+A2:2016 Thermal insulation products for buildings — Factory made rigid polyurethane foam (PU) products — Specification |
EN 13165:2012+A1:2015 |
14.10.2016 |
14.10.2017 |
|
CEN |
EN 13166:2012+A2:2016 Thermal insulation products for buildings — Factory made phenolic foam (PF) products — Specification |
EN 13166:2012+A1:2015 |
14.10.2016 |
14.10.2017 |
|
CEN |
EN 13167:2012+A1:2015 Thermal insulation products for buildings — Factory made cellular glass (CG) products — Specification |
EN 13167:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13168:2012+A1:2015 Thermal insulation products for buildings — Factory made wood wool (WW) products — Specification |
EN 13168:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13169:2012+A1:2015 Thermal insulation products for buildings — Factory made expanded perlite board (EPB) products — Specification |
EN 13169:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13170:2012+A1:2015 Thermal insulation products for buildings — Factory made products of expanded cork (ICB) — Specification |
EN 13170:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13171:2012+A1:2015 Thermal insulation products for buildings — Factory made wood fibre (WF) products — Specification |
EN 13171:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 13224:2011 Precast concrete products — Ribbed floor elements |
EN 13224:2004+A1:2007 |
1.8.2012 |
1.8.2013 |
|
CEN |
EN 13225:2013 Precast concrete products — Linear structural elements |
EN 13225:2004 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 13229:2001 Inset appliances including open fires fired by solid fuels — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13229:2001/AC:2006 |
|
1.7.2007 |
1.7.2007 |
|
|
EN 13229:2001/A2:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
|
EN 13229:2001/A2:2004 |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13229:2001/A1:2003 |
|
1.6.2006 |
1.6.2007 |
|
CEN |
EN 13240:2001 Roomheaters fired by solid fuel — Requirements and test methods |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13240:2001/A2:2004 |
|
1.7.2005 |
1.7.2007 |
|
|
EN 13240:2001/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
|
EN 13240:2001/A2:2004/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates — Product standard, performance characteristics |
EN 13241-1:2003+A1:2011 |
1.11.2016 |
1.11.2019 |
|
CEN |
EN 13242:2002+A1:2007 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
EN 13242:2002 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 13245-2:2008 Plastics — Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications — Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes |
|
1.7.2010 |
1.7.2012 |
|
|
EN 13245-2:2008/AC:2009 |
|
1.7.2010 |
1.7.2010 |
|
CEN |
EN 13249:2016 Geotextiles and geotextile-related products — Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
EN 13249:2000+A1:2005 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13250:2016 Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways |
EN 13250:2000+A1:2005 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13251:2016 Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures |
EN 13251:2000+A1:2005 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13252:2016 Geotextiles and geotextile-related products — Characteristics required for use in drainage systems |
EN 13252:2000+A1:2005 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13253:2016 Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank revetments) |
EN 13253:2000+A1:2005 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13254:2016 Geotextiles and geotextile-related products — Characteristics required for the use in the construction of reservoirs and dams |
EN 13254:2000+A1:2005+AC:2003 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13255:2016 Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals |
EN 13255:2000+A1:2005 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13256:2016 Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures |
EN 13256:2000+A1:2005 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13257:2016 Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals |
EN 13257:2000+A1:2005 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13263-1:2005+A1:2009 Silica fume for concrete — Part 1: Definitions, requirements and conformity criteria |
EN 13263-1:2005 |
1.1.2010 |
1.1.2011 |
|
CEN |
EN 13265:2016 Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects |
EN 13265:2000+A1:2005 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 13279-1:2008 Gypsum binders and gypsum plasters — Part 1: Definitions and requirements |
EN 13279-1:2005 |
1.10.2009 |
1.10.2010 |
|
CEN |
EN 13282-1:2013 Hydraulic road binders — Part 1: Rapid hardening hydraulic road binders — Composition, specifications and conformity criteria |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 13310:2003 Kitchen sinks — Functional requirements and test methods |
|
1.2.2004 |
1.2.2006 |
|
CEN |
EN 13341:2005+A1:2011 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels — Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 — Requirements and test methods |
EN 13341:2005 |
1.10.2011 |
1.10.2011 |
|
CEN |
EN 13361:2004 Geosynthetic barriers — Characteristics required for use in the construction of reservoirs and dams |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13361:2004/A1:2006 |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13362:2005 Geosynthetic Barriers — Characteristics required for use in the construction of canals |
|
1.2.2006 |
1.2.2007 |
|
CEN |
EN 13383-1:2002 Armourstone — Part 1: Specification |
|
1.3.2003 |
1.6.2004 |
|
|
EN 13383-1:2002/AC:2004 |
|
1.1.2010 |
1.1.2010 |
|
The threshold level for density set in Clause 5.2 (of EN 13383-1:2002) is excluded from the scope of the reference. (COM Decision 2016/1610) |
||||
|
CEN |
EN 13407:2006 Wall-hung urinals — Functional requirements and test methods |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 13450:2002 Aggregates for railway ballast |
|
1.10.2003 |
1.6.2004 |
|
|
EN 13450:2002/AC:2004 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 13454-1:2004 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate — Part 1: Definitions and requirements |
|
1.7.2005 |
1.7.2006 |
|
CEN |
EN 13479:2017 Welding consumables — General product standard for filler metals and fluxes for fusion welding of metallic materials |
EN 13479:2004 |
9.3.2018 |
9.3.2019 |
|
CEN |
EN 13491:2004 Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13491:2004/A1:2006 |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13492:2004 Geosynthetic barriers — Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13492:2004/A1:2006 |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13493:2005 Geosynthetic barriers — Characteristics required for use in the construction of solid waste storage and disposal sites |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 13502:2002 Chimneys — Requirements and test methods for clay/ceramic flue terminals |
|
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13561:2004+A1:2008 External blinds — Performance requirements including safety |
EN 13561:2004 |
1.8.2009 |
1.8.2010 |
|
CEN |
EN 13564-1:2002 Anti-flooding devices for buildings — Part 1: Requirements |
|
1.5.2003 |
1.5.2004 |
|
CEN |
EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels |
|
1.5.2005 |
1.5.2006 |
|
|
EN 13616:2004/AC:2006 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 13658-1:2005 Metal lath and beads — Definitions, requirements and test methods — Part 1: Internal plastering |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 13658-2:2005 Metal lath and beads — Definitions, requirements and test methods — Part 2: External rendering |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 13659:2004+A1:2008 Shutters — Performance requirements including safety |
EN 13659:2004 |
1.8.2009 |
1.8.2010 |
|
CEN |
EN 13693:2004+A1:2009 Precast concrete products — Special roof elements |
EN 13693:2004 |
1.5.2010 |
1.5.2011 |
|
CEN |
EN 13707:2004+A2:2009 Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics |
|
1.4.2010 |
1.10.2010 |
|
CEN |
EN 13747:2005+A2:2010 Precast concrete products — Floor plates for floor systems |
EN 13747:2005+A1:2008 |
1.1.2011 |
1.1.2011 |
|
CEN |
EN 13748-1:2004 Terrazzo tiles — Part 1: Terrazzo tiles for internal use |
|
1.6.2005 |
1.10.2006 |
|
|
EN 13748-1:2004/A1:2005 |
|
1.4.2006 |
1.10.2006 |
|
|
EN 13748-1:2004/AC:2005 |
|
1.6.2005 |
1.6.2005 |
|
CEN |
EN 13748-2:2004 Terrazzo tiles — Part 2: Terrazzo tiles for external use |
|
1.4.2005 |
1.4.2006 |
|
CEN |
EN 13808:2013 Bitumen and bituminous binders — Framework for specifying cationic bituminous emulsions |
EN 13808:2005 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 13813:2002 Screed material and floor screeds — Screed material — Properties and requirements |
|
1.8.2003 |
1.8.2004 |
|
CEN |
EN 13815:2006 Fibrous gypsum plaster casts — Definitions, requirements and test methods |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 13830:2003 Curtain walling — Product standard |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 13859-1:2010 Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 1: Underlays for discontinuous roofing |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 13859-2:2010 Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 2: Underlays for walls |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 13877-3:2004 Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 13915:2007 Prefabricated gypsum plasterboard panels with a cellular paperboard core — Definitions, requirements and test methods |
|
1.6.2008 |
1.6.2009 |
|
CEN |
EN 13924:2006 Bitumen and bituminous binders — Specifications for hard paving grade bitumens |
|
1.1.2010 |
1.1.2011 |
|
|
EN 13924:2006/AC:2006 |
|
1.1.2010 |
1.1.2010 |
|
CEN |
EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels — Definitions, requirements and test methods |
EN 13950:2005 |
13.2.2015 |
13.2.2016 |
|
CEN |
EN 13956:2012 Flexible sheets for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics |
EN 13956:2005 |
1.10.2013 |
1.10.2013 |
|
CEN |
EN 13963:2005 Jointing materials for gypsum plasterboards — Definitions, requirements and test methods |
|
1.3.2006 |
1.3.2007 |
|
|
EN 13963:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 13964:2014 Suspended ceilings — Requirements and test methods |
EN 13964:2004 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 13967:2012 Flexible sheets for waterproofing — Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet — Definitions and characteristics |
EN 13967:2004 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 13969:2004 Flexible sheets for waterproofing — Bitumen damp proof sheets including bitumen basement tanking sheets — Definitions and characteristics |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13969:2004/A1:2006 |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 13970:2004 Flexible sheets for waterproofing — Bitumen water vapour control layers — Definitions and characteristics |
|
1.9.2005 |
1.9.2006 |
|
|
EN 13970:2004/A1:2006 |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 13978-1:2005 Precast concrete products — Precast concrete garages — Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions |
|
1.3.2006 |
1.3.2008 |
|
CEN |
EN 13984:2013 Flexible sheets for waterproofing — Plastic and rubber vapour control layers — Definitions and characteristics |
EN 13984:2004 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 13986:2004+A1:2015 Wood-based panels for use in construction — Characteristics, evaluation of conformity and marking |
EN 13986:2004 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 14016-1:2004 Binders for magnesite screeds — Caustic magnesia and magnesium chloride — Part 1: Definitions, requirements |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 14023:2010 Bitumen and bituminous binders — Specification framework for polymer modified bitumens |
|
1.1.2011 |
1.1.2012 |
|
CEN |
EN 14037-1:2016 Free hanging heating and cooling surfaces for water with a temperature below 120 oC — Part 1: Pre-fabricated ceiling mounted radiant panels for space heating — Technical specifications and requirements |
EN 14037-1:2003 |
10.3.2017 |
10.3.2018 |
|
CEN |
EN 14041:2004 Resilient, textile and laminate floor coverings — Essential characteristics |
|
1.1.2006 |
1.1.2007 |
|
|
EN 14041:2004/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 14055:2010 WC and urinal flushing cisterns |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 14063-1:2004 Thermal insulation products for buildings — In-situ formed expanded clay lightweight aggregate products — Part 1: Specification for the loose-fill products before installation |
|
1.6.2005 |
1.6.2006 |
|
|
EN 14063-1:2004/AC:2006 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 14064-1:2010 Thermal insulation products for buildings — In-situ formed loose-fill mineral wool (MW) products — Part 1: Specification for the loose-fill products before installation |
|
1.12.2010 |
1.12.2011 |
|
CEN |
EN 14080:2013 Timber structures — Glued laminated timber and glued solid timber — Requirements |
EN 14080:2005 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14081-1:2005+A1:2011 Timber structures — Strength graded structural timber with rectangular cross section — Part 1: General requirements |
EN 14081-1:2005 |
1.10.2011 |
31.12.2011 |
|
CEN |
EN 14178-2:2004 Glass in building — Basic alkaline earth silicate glass products — Part 2: Evaluation of conformity/Product standard |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 14179-2:2005 Glass in building — Heat soaked thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.3.2006 |
1.3.2007 |
|
CEN |
EN 14188-1:2004 Joint fillers and sealants — Part 1: Specifications for hot applied sealants |
|
1.7.2005 |
1.1.2007 |
|
CEN |
EN 14188-2:2004 Joint fillers and sealants — Part 2: Specifications for cold applied sealants |
|
1.10.2005 |
1.1.2007 |
|
CEN |
EN 14188-3:2006 Joint fillers and sealants — Part 3: Specifications for preformed joint seals |
|
1.11.2006 |
1.11.2007 |
|
CEN |
EN 14190:2014 Gypsum board products from reprocessing — Definitions, requirements and test methods |
EN 14190:2005 |
13.2.2015 |
13.2.2016 |
|
CEN |
EN 14195:2005 Metal framing components for gypsum plasterboard systems — Definitions, requirements and test methods |
|
1.1.2006 |
1.1.2007 |
|
|
EN 14195:2005/AC:2006 |
|
1.1.2007 |
1.1.2007 |
|
CEN |
EN 14209:2017 Preformed plasterboard cornices — Definitions, requirements and test methods |
EN 14209:2005 |
9.3.2018 |
9.3.2019 |
|
CEN |
EN 14216:2015 Cement — Composition, specifications and conformity criteria for very low heat special cements |
EN 14216:2004 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 14229:2010 Structural timber — Wood poles for overhead lines |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 14246:2006 Gypsum elements for suspended ceilings — Definitions, requirements and test methods |
|
1.4.2007 |
1.4.2008 |
|
|
EN 14246:2006/AC:2007 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 14250:2010 Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
EN 14250:2004 |
1.11.2010 |
1.11.2010 |
|
CEN |
EN 14296:2005 Sanitary appliances — Communal washing troughs |
|
1.3.2006 |
1.3.2008 |
|
CEN |
EN 14303:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made mineral wool (MW) products — Specification |
EN 14303:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14304:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made flexible elastomeric foam (FEF) products — Specification |
EN 14304:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14305:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made cellular glass (CG) products — Specification |
EN 14305:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14306:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made calcium silicate (CS) products — Specification |
EN 14306:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14307:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made extruded polystyrene foam (XPS) products — Specification |
EN 14307:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14308:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products — Specification |
EN 14308:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14309:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made products of expanded polystyrene (EPS) — Specification |
EN 14309:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14313:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made polyethylene foam (PEF) products — Specification |
EN 14313:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations — Factory made phenolic foam (PF) products — Specification |
EN 14314:2009 |
1.11.2013 |
1.11.2013 |
|
CEN |
EN 14315-1:2013 Thermal insulating products for buildings — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam spray system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14316-1:2004 Thermal insulation products for buildings — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 14317-1:2004 Thermal insulation products for buildings — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.6.2005 |
1.6.2006 |
|
CEN |
EN 14318-1:2013 Thermal insulating products for buildings — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam dispensed system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14319-1:2013 Thermal insulating products for building equipment and industrial installations — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam dispensed system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14320-1:2013 Thermal insulating products for building equipment and industrial installations — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products — Part 1: Specification for the rigid foam spray system before installation |
|
1.11.2013 |
1.11.2014 |
|
CEN |
EN 14321-2:2005 Glass in building — Thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
1.6.2006 |
1.6.2007 |
|
CEN |
EN 14339:2005 Underground fire hydrants |
|
1.5.2006 |
1.5.2007 |
|
CEN |
EN 14342:2013 Wood flooring and parquet — Characteristics, evaluation of conformity and marking |
EN 14342:2005+A1:2008 |
8.8.2014 |
8.8.2015 |
|
Clause 4.4 of standard EN 14342:2013 is excluded from the scope of the reference published. |
||||
|
CEN |
EN 14351-1:2006+A2:2016 Windows and doors — Product standard, performance characteristics — Part 1: Windows and external pedestrian doorsets |
EN 14351-1:2006+A1:2010 |
1.11.2016 |
1.11.2019 |
|
The sentence regarding ‘ability to release’ in Clause 1, Scope (of EN 14351-1:2006+A2:2016) is excluded from the scope of the reference. |
||||
|
CEN |
EN 14353:2007+A1:2010 Metal beads and feature profiles for use with gypsum plasterboards — Definitions, requirements and test methods |
EN 14353:2007 |
1.11.2010 |
1.11.2010 |
|
CEN |
EN 14374:2004 Timber structures — Structural laminated veneer lumber — Requirements |
|
1.9.2005 |
1.9.2006 |
|
CEN |
EN 14384:2005 Pillar fire hydrants |
|
1.5.2006 |
1.5.2007 |
|
CEN |
EN 14388:2005 Road traffic noise reducing devices — Specifications |
|
1.5.2006 |
1.5.2007 |
|
|
EN 14388:2005/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 14396:2004 Fixed ladders for manholes |
|
1.12.2004 |
1.12.2005 |
|
CEN |
EN 14399-1:2015 High-strength structural bolting assemblies for preloading — Part 1: General requirements |
EN 14399-1:2005 |
8.4.2016 |
8.4.2017 |
|
CEN |
EN 14411:2012 Ceramic tiles — Definitions, classification, characteristics, evaluation of conformity and marking |
EN 14411:2006 |
1.7.2013 |
1.7.2014 |
|
CEN |
EN 14428:2004+A1:2008 Shower enclosures — Functional requirements and test methods |
EN 14428:2004 |
1.1.2009 |
1.1.2010 |
|
CEN |
EN 14449:2005 Glass in building — Laminated glass and laminated safety glass — Evaluation of conformity/Product standard |
|
1.3.2006 |
1.3.2007 |
|
|
EN 14449:2005/AC:2005 |
|
1.6.2006 |
1.6.2006 |
|
CEN |
EN 14471:2013+A1:2015 Chimneys — System chimneys with plastic flue liners — Requirements and test methods |
EN 14471:2005 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 14496:2005 Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards — Definitions, requirements and test methods |
|
1.9.2006 |
1.9.2007 |
|
CEN |
EN 14509:2013 Self-supporting double skin metal faced insulating panels — Factory made products — Specifications |
EN 14509:2006 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14516:2006+A1:2010 Baths for domestic purposes |
|
1.5.2011 |
1.5.2012 |
|
CEN |
EN 14527:2006+A1:2010 Shower trays for domestic purposes |
|
1.5.2011 |
1.5.2012 |
|
CEN |
EN 14528:2007 Bidets — Functional requirements and test methods |
EN 14528:2005 |
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14545:2008 Timber structures — Connectors — Requirements |
|
1.8.2009 |
1.8.2010 |
|
CEN |
EN 14566:2008+A1:2009 Mechanical fasteners for gypsum plasterboard systems — Definitions, requirements and test methods |
EN 14566:2008 |
1.5.2010 |
1.11.2010 |
|
CEN |
EN 14592:2008+A1:2012 Timber structures — Dowel-type fasteners — Requirements |
EN 14592:2008 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 14604:2005 Smoke alarm devices |
|
1.5.2006 |
1.8.2008 |
|
|
EN 14604:2005/AC:2008 |
|
1.8.2009 |
1.8.2009 |
|
CEN |
EN 14647:2005 Calcium aluminate cement — Composition, specifications and conformity criteria |
|
1.8.2006 |
1.8.2007 |
|
|
EN 14647:2005/AC:2006 |
|
1.1.2008 |
1.1.2008 |
|
CEN |
EN 14680:2006 Adhesives for non-pressure thermoplastic piping systems — Specifications |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14688:2006 Sanitary appliances — Wash basins — Functional requirements and test methods |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14695:2010 Flexible sheets for waterproofing — Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete — Definitions and characteristics |
|
1.10.2010 |
1.10.2011 |
|
CEN |
EN 14716:2004 Stretched ceilings — Requirements and test methods |
|
1.10.2005 |
1.10.2006 |
|
CEN |
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining — Product specification and requirements |
|
1.11.2006 |
1.11.2007 |
|
CEN |
EN 14783:2013 Fully supported metal sheet and strip for roofing, external cladding and internal lining — Product specification and requirements |
EN 14783:2006 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14785:2006 Residential space heating appliances fired by wood pellets — Requirements and test methods |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 14800:2007 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14814:2007 Adhesives for thermoplastic piping systems for fluids under pressure — Specifications |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14843:2007 Precast concrete products — Stairs |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14844:2006+A2:2011 Precast concrete products — Box culverts |
EN 14844:2006+A1:2008 |
1.9.2012 |
1.9.2013 |
|
CEN |
EN 14846:2008 Building hardware — Locks and latches — Electromechanically operated locks and striking plates — Requirements and test methods |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 14889-1:2006 Fibres for concrete — Part 1: Steel fibres — Definitions, specifications and conformity |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 14889-2:2006 Fibres for concrete — Part 2: Polymer fibres — Definitions, specifications and conformity |
|
1.6.2007 |
1.6.2008 |
|
CEN |
EN 14891:2012 Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives — Requirements, test methods, evaluation of conformity, classification and designation |
|
1.3.2013 |
1.3.2014 |
|
|
EN 14891:2012/AC:2012 |
|
1.3.2013 |
1.3.2013 |
|
CEN |
EN 14904:2006 Surfaces for sports areas — Indoor surfaces for multi-sports use — Specification |
|
1.2.2007 |
1.2.2008 |
|
Note 1 of Annex ZA.1 to standard EN 14904:2006 is excluded from the scope of the reference published. |
||||
|
CEN |
EN 14909:2012 Flexible sheets for waterproofing — Plastic and rubber damp proof courses — Definitions and characteristics |
EN 14909:2006 |
1.3.2013 |
1.7.2013 |
|
CEN |
EN 14915:2013 Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking |
EN 14915:2006 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 14933:2007 Thermal insulation and light weight fill products for civil engineering applications — Factory made products of expanded polystyrene (EPS) — Specification |
|
1.7.2008 |
1.7.2009 |
|
CEN |
EN 14934:2007 Thermal insulation and light weight fill products for civil engineering applications — Factory made products of extruded polystyrene foam (XPS) — Specification |
|
1.7.2008 |
1.7.2009 |
|
CEN |
EN 14963:2006 Roof coverings — Continuous rooflights of plastics with or without upstands — Classification, requirements and test methods |
|
1.8.2009 |
1.8.2012 |
|
CEN |
EN 14964:2006 Rigid underlays for discontinuous roofing — Definitions and characteristics |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14967:2006 Flexible sheets for waterproofing — Bitumen damp proof courses — Definitions and characteristics |
|
1.3.2007 |
1.3.2008 |
|
CEN |
EN 14989-1:2007 Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 1: Vertical air/flue terminals for C6-type appliances |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14989-2:2007 Chimneys — Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications — Part 2: Flue and air supply ducts for room sealed appliances |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 14991:2007 Precast concrete products — Foundation elements |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 14992:2007+A1:2012 Precast concrete products — Wall elements |
EN 14992:2007 |
1.4.2013 |
1.7.2013 |
|
CEN |
EN 15037-1:2008 Precast concrete products — Beam-and-block floor systems — Part 1: Beams |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 15037-2:2009+A1:2011 Precast concrete products — Beam-and-block floor systems — Part 2: Concrete blocks |
|
1.12.2011 |
1.12.2012 |
|
CEN |
EN 15037-3:2009+A1:2011 Precast concrete products — Beam-and-block floor systems — Part 3: Clay blocks |
|
1.12.2011 |
1.12.2012 |
|
CEN |
EN 15037-4:2010+A1:2013 Precast concrete products — Beam-and-block floor systems — Part 4: Expanded polystyrene blocks |
EN 15037-4:2010 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15037-5:2013 Precast concrete products — Beam-and-block floor systems — Part 5: Lightweight blocks for simple formwork |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15048-1:2007 Non-preloaded structural bolting assemblies — Part 1: General requirements |
|
1.1.2008 |
1.10.2009 |
|
CEN |
EN 15050:2007+A1:2012 Precast concrete products — Bridge elements |
EN 15050:2007 |
1.12.2012 |
1.12.2012 |
|
CEN |
EN 15069:2008 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
|
1.1.2009 |
1.1.2010 |
|
CEN |
EN 15088:2005 Aluminium and aluminium alloys — Structural products for construction works — Technical conditions for inspection and delivery |
|
1.10.2006 |
1.10.2007 |
|
CEN |
EN 15102:2007+A1:2011 Decorative wall coverings — Roll and panel form |
EN 15102:2007 |
1.7.2012 |
1.7.2012 |
|
CEN |
EN 15129:2009 Anti-seismic devices |
|
1.8.2010 |
1.8.2011 |
|
CEN |
EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout — Part 1: Definitions, specifications and conformity criteria |
|
1.1.2008 |
1.1.2009 |
|
CEN |
EN 15250:2007 Slow heat release appliances fired by solid fuel — Requirements and test methods |
|
1.1.2008 |
1.1.2010 |
|
CEN |
EN 15258:2008 Precast concrete products — Retaining wall elements |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 15274:2015 General purpose adhesives for structural assembly — Requirements and test methods |
EN 15274:2007 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 15275:2015 Structural adhesives — Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
EN 15275:2007 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 15283-1:2008+A1:2009 Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 1: Gypsum boards with mat reinforcement |
EN 15283-1:2008 |
1.6.2010 |
1.6.2011 |
|
CEN |
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 2: Gypsum fibre boards |
EN 15283-2:2008 |
1.6.2010 |
1.6.2011 |
|
CEN |
EN 15285:2008 Agglomerated stone — Modular tiles for flooring and stairs (internal and external) |
|
1.1.2009 |
1.1.2010 |
|
|
EN 15285:2008/AC:2008 |
|
1.1.2009 |
1.1.2009 |
|
CEN |
EN 15286:2013 Agglomerated stone — Slabs and tiles for wall finishes (internal and external) |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15322:2013 Bitumen and bituminous binders — Framework for specifying cut-back and fluxed bituminous binders |
EN 15322:2009 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15368:2008+A1:2010 Hydraulic binder for non-structural applications — Definition, specifications and conformity criteria |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 15381:2008 Geotextiles and geotextile-related products — Characteristics required for use in pavements and asphalt overlays |
|
1.1.2010 |
1.1.2011 |
|
CEN |
EN 15382:2013 Geosynthetic barriers — Characteristics required for use in transportation infrastructure |
EN 15382:2008 |
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15435:2008 Precast concrete products — Normal weight and lightweight concrete shuttering blocks — Product properties and performance |
|
1.2.2009 |
1.2.2010 |
|
CEN |
EN 15497:2014 Structural finger jointed solid timber — Performance requirements and minimum production requirements |
|
10.10.2014 |
10.10.2015 |
|
CEN |
EN 15498:2008 Precast concrete products — Wood-chip concrete shuttering blocks — Product properties and performance |
|
1.2.2009 |
1.2.2010 |
|
CEN |
EN 15501:2013 Thermal insulation products for building equipment and industrial installations — Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products — Specification |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 15600-1:2010 Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation |
|
1.4.2011 |
1.4.2012 |
|
CEN |
EN 15650:2010 Ventilation for buildings — Fire dampers |
|
1.9.2011 |
1.9.2012 |
|
CEN |
EN 15651-1:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 1: Sealants for facade elements |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15651-2:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 2: Sealants for glazing |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15651-3:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 3: Sealants for sanitary joints |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15651-4:2012 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 4: Sealants for pedestrian walkways |
|
1.7.2013 |
1.7.2014 |
|
CEN |
EN 15681-2:2017 Glass in Building — Basic alumino silicate glass products — Part 2: Product standard |
|
11.8.2017 |
11.8.2018 |
|
The third sentence of Clause 4.2.2.10 is excluded from the scope of the reference published. |
||||
|
CEN |
EN 15682-2:2013 Glass in building — Heat soaked thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15683-2:2013 Glass in building — Thermally toughened soda lime silicate channel shaped safety glass — Part 2: Evaluation of conformity/Product standard |
|
8.8.2014 |
8.8.2015 |
|
CEN |
EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA) — Expanded clay lightweight aggregate products (LWA) |
|
1.8.2013 |
1.8.2014 |
|
CEN |
EN 15743:2010+A1:2015 Supersulfated cement — Composition, specifications and conformity criteria |
EN 15743:2010 |
13.11.2015 |
13.11.2016 |
|
CEN |
EN 15814:2011+A2:2014 Polymer modified bituminous thick coatings for waterproofing — Definitions and requirements |
EN 15814:2011+A1:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 15821:2010 Multi-firing sauna stoves fired by natural wood logs — Requirements and test methods |
|
1.7.2011 |
1.7.2012 |
|
CEN |
EN 15824:2017 Specifications for external renders and internal plasters based on organic binders |
EN 15824:2009 |
9.3.2018 |
9.3.2019 |
|
CEN |
EN 16034:2014 Pedestrian doorsets, industrial, commercial, garage doors and openable windows — Product standard, performance characteristics — Fire resisting and/or smoke control characteristics |
|
1.11.2016 |
1.11.2019 |
|
NOTE: EN 16034:2014 shall only be applied together with either EN 13241:2003+A2:2016 or EN 14351-1:2006+A2:2016. |
||||
|
CEN |
EN 16069:2012+A1:2015 Thermal insulation products for buildings — Factory made products of polyethylene foam (PEF) — Specification |
EN 16069:2012 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods |
EN 16153:2013 |
10.7.2015 |
10.7.2016 |
|
CEN |
EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods |
|
10.3.2017 |
10.3.2018 |
|
Cenelec |
EN 50575:2014 Power, control and communication cables — Cables for general applications in construction works subject to reaction to fire requirements |
|
10.6.2016 |
1.7.2017 |
|
|
EN 50575:2014/A1:2016 |
|
10.6.2016 |
1.7.2017 |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No: 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Rue de la Science 23, 1040 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel. +32 25500811. Fax +32 25500819 (http://www.cen.eu) |
|
— |
CENELEC: Rue de la Science 23, 1040 Bruxelles/Brussel, BELGIQUE/BELGIË. Tel. +32 25500811. Fax +32 25500819 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, FRANCE. Tel. +33 492944200. Fax +33 493654716 (http://www.etsi.eu) |
(2) OJ C 338, 27.9.2014, p. 31.