|
ISSN 1977-091X |
||
|
Official Journal of the European Union |
C 90 |
|
|
||
|
English edition |
Information and Notices |
Volume 61 |
|
Notice No |
Contents |
page |
|
|
II Information |
|
|
|
INFORMATION FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES |
|
|
|
European Commission |
|
|
2018/C 90/01 |
Non-opposition to a notified concentration (Case M.8768 — Singapore Airlines/CAE/JV) ( 1 ) |
|
|
2018/C 90/02 |
Non-opposition to a notified concentration (Case M.8796 — Crown/Signode) ( 1 ) |
|
|
IV Notices |
|
|
|
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES |
|
|
|
European Commission |
|
|
2018/C 90/03 |
||
|
2018/C 90/04 |
Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (Publication of references of European Assessment Documents in accordance with Article 22 of Regulation (EU) No 305/2011) ( 1 ) |
|
|
|
NOTICES FROM MEMBER STATES |
|
|
2018/C 90/05 |
Commission information notice pursuant to Article 16(4) of Regulation (EC) No 1008/2008 of the European Parliament and of the Council on common rules for the operation of air services in the Community — Imposition of public service obligations in respect of scheduled air services ( 1 ) |
|
|
V Announcements |
|
|
|
PROCEDURES RELATING TO THE IMPLEMENTATION OF COMPETITION POLICY |
|
|
|
European Commission |
|
|
2018/C 90/06 |
Prior notification of a concentration (Case M.8836 — 3i/Sits) — Candidate case for simplified procedure ( 1 ) |
|
|
|
OTHER ACTS |
|
|
|
European Commission |
|
|
2018/C 90/07 |
|
|
|
|
|
(1) Text with EEA relevance. |
|
EN |
|
II Information
INFORMATION FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 90/1 |
Non-opposition to a notified concentration
(Case M.8768 — Singapore Airlines/CAE/JV)
(Text with EEA relevance)
(2018/C 90/01)
On 2 March 2018, the Commission decided not to oppose the above notified concentration and to declare it compatible with the internal market. This decision is based on Article 6(1)(b) of Council Regulation (EC) No 139/2004 (1). The full text of the decision is available only in English and will be made public after it is cleared of any business secrets it may contain. It will be available:
|
— |
in the merger section of the Competition website of the Commission (http://ec.europa.eu/competition/mergers/cases/). This website provides various facilities to help locate individual merger decisions, including company, case number, date and sectoral indexes, |
|
— |
in electronic form on the EUR-Lex website (http://eur-lex.europa.eu/homepage.html?locale=en) under document number 32018M8768. EUR-Lex is the online access to European law. |
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 90/1 |
Non-opposition to a notified concentration
(Case M.8796 — Crown/Signode)
(Text with EEA relevance)
(2018/C 90/02)
On 5 March 2018, the Commission decided not to oppose the above notified concentration and to declare it compatible with the internal market. This decision is based on Article 6(1)(b) of Council Regulation (EC) No 139/2004 (1). The full text of the decision is available only in English and will be made public after it is cleared of any business secrets it may contain. It will be available:
|
— |
in the merger section of the Competition website of the Commission (http://ec.europa.eu/competition/mergers/cases/). This website provides various facilities to help locate individual merger decisions, including company, case number, date and sectoral indexes, |
|
— |
in electronic form on the EUR-Lex website (http://eur-lex.europa.eu/homepage.html?locale=en) under document number 32018M8796. EUR-Lex is the online access to European law. |
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 90/2 |
Euro exchange rates (1)
8 March 2018
(2018/C 90/03)
1 euro =
|
|
Currency |
Exchange rate |
|
USD |
US dollar |
1,2421 |
|
JPY |
Japanese yen |
131,83 |
|
DKK |
Danish krone |
7,4505 |
|
GBP |
Pound sterling |
0,89465 |
|
SEK |
Swedish krona |
10,2173 |
|
CHF |
Swiss franc |
1,1731 |
|
ISK |
Iceland króna |
123,50 |
|
NOK |
Norwegian krone |
9,7135 |
|
BGN |
Bulgarian lev |
1,9558 |
|
CZK |
Czech koruna |
25,427 |
|
HUF |
Hungarian forint |
312,02 |
|
PLN |
Polish zloty |
4,2042 |
|
RON |
Romanian leu |
4,6588 |
|
TRY |
Turkish lira |
4,7326 |
|
AUD |
Australian dollar |
1,5912 |
|
CAD |
Canadian dollar |
1,6044 |
|
HKD |
Hong Kong dollar |
9,7356 |
|
NZD |
New Zealand dollar |
1,7102 |
|
SGD |
Singapore dollar |
1,6339 |
|
KRW |
South Korean won |
1 331,33 |
|
ZAR |
South African rand |
14,7670 |
|
CNY |
Chinese yuan renminbi |
7,8696 |
|
HRK |
Croatian kuna |
7,4365 |
|
IDR |
Indonesian rupiah |
17 114,90 |
|
MYR |
Malaysian ringgit |
4,8523 |
|
PHP |
Philippine peso |
64,646 |
|
RUB |
Russian rouble |
70,6686 |
|
THB |
Thai baht |
38,921 |
|
BRL |
Brazilian real |
4,0261 |
|
MXN |
Mexican peso |
23,2184 |
|
INR |
Indian rupee |
80,8980 |
(1) Source: reference exchange rate published by the ECB.
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 90/3 |
Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC
(Publication of references of European Assessment Documents in accordance with Article 22 of Regulation (EU) No 305/2011)
(Text with EEA relevance)
(2018/C 90/04)
The provisions of Regulation (EU) No 305/2011 of the European Parliament and of the Council (1) prevail over any conflicting provisions in the European Assessment Documents.
|
Reference and title of the European Assessment Document |
Reference and title of the superseded European Assessment Document |
Remarks |
|
|
(1) |
(2) |
(3) |
(4) |
|
010001-00-0301 |
Precast concrete composite wall with point connectors |
|
|
|
010003-00-0301 |
Precast balcony elements made of ultra-high performance fibre reinforced concrete (UHPFRC) |
|
|
|
010013-00-0301 |
Lightweight panel made of mortar of cement and granulated EPS reinforced by a glass fibre mesh and an internal steel railing |
|
|
|
020001-01-0405 |
Multi-axis concealed hinge assemblies |
020001-00-0405 |
|
|
020002-00-0404 |
Balcony (and terrace) glazing system without vertical frames |
|
|
|
020011-00-0405 |
Roof, floor, wall and ceiling hatches providing access or for use as an emergency door / with or without fire resistance |
|
|
|
020029-00-1102 |
Internal pedestrian fire resisting and/or smoke control single or double leaf doorsets made of steel |
|
|
|
030019-00-0402 |
Liquid applied roof waterproofing on the basis of polysiloxane |
|
|
|
030218-00-0402 |
Membrane for use as roof underlay |
|
|
|
040005-00-1201 |
Factory-made thermal and/or acoustic insulation products made of vegetable or animal fibres |
|
|
|
040007-00-1201 |
Thermal insulation product for buildings with radiant heat reflective component |
|
|
|
040010-00-1201 |
Insulation product made of expanded perlite (EPB) |
|
|
|
040011-00-1201 |
Vacuum insulation panels (VIP) with factory applied protection layers |
|
|
|
040016-00-0404 |
Glass fibre mesh for reinforcement of cement based renderings |
|
|
|
040037-00-1201 |
Low lambda composite boards made of mineral wool fibres and aerogel additives |
|
|
|
040048-00-0502 |
Rubber fibre mat to be used for impact sound insulation |
|
|
|
040065-00-1201 |
Thermal insulation and/or sound absorbing boards based on expanded polystyrene and cement |
|
|
|
040089-00-0404 |
External Thermal Insulation Composite Systems with renderings for the use on timber frame buildings |
|
|
|
040090-00-1201 |
Factory-made boards and products formed by moulding of an expanded polylactic acid (epla) for thermal and/or acoustical insulation. |
|
|
|
040138-00-1201 |
In-situ formed loose fill thermal and/or acoustic insulation products made of vegetable fibres |
|
|
|
040287-00-0404 |
Kits for external thermal insulation composite system (ETICS) with panels as thermal insulation product and discontinuous claddings as exterior skin |
|
|
|
040288-00-1201 |
Factory-made thermal and acoustic insulations made of polyester fibres |
|
|
|
040313-00-1201 |
In-situ formed loose fill thermal and/or acoustic insulation product made of granulated expanded cork |
|
|
|
040369-00-1201 |
Insulation made of loose-fill or compound granulated expanded cork |
|
|
|
040394-00-1201 |
Factory made cellular glass loose fill |
|
|
|
040456-00-1201 |
In-situ formed loose fill thermal and/or acoustic insulation material made of animal fibres |
|
|
|
040635-00-1201 |
Thermal and/or sound insulation based on bound expanded polystyrene bulk material |
|
|
|
040643-00-1201 |
Fibre reinforced silica aerogel thermal insulation |
|
|
|
040650-00-1201 |
Extruded polystyrene foam boards as load bearing layer and / or thermal insulation outside the waterproofing |
|
|
|
040777-00-1201 |
Cellular glass boards as load bearing layer and thermal insulation outside the waterproofing |
|
|
|
050001-00-0301 |
Load bearing thermal insulating elements which form a thermal break between balconies and internal floors |
|
|
|
050004-00-0301 |
Spherical and cylindrical bearing with special sliding material made of UHMWPE (ultra high molecular weight polyethylene) |
|
|
|
050009-00-0301 |
Spherical and cylindrical bearing with special sliding material made of fluoropolymer |
|
|
|
050013-00-0301 |
Spherical and cylindrical bearing with special sliding material made of filled PTFE with solid lubricant and reinforcing fibres |
|
|
|
060001-00-0802 |
Chimney kit with clay/ceramic flue liner with classification T400 (MINIMUM) N1 W3 GXX |
|
|
|
060003-00-0802 |
Chimney kit with clay/ceramic flue liner and with specific outer wall with classification T400 (minimum) N1 W3 GXX |
|
|
|
060008-00-0802 |
Chimney kit with clay/ceramic flue liner with classification T400 (minimum) N1/P1 W3 Gxx and with different outer walls and possible change of outer wall |
|
|
|
070001-01-0504 |
Gypsum plasterboards for load bearing applications |
070001-00-0504 |
|
|
070002-00-0505 |
Glass fibre joint tape for gypsum plasterboards |
|
|
|
080002-00-0102 |
Non-reinforcing hexagonal geogrid for the stabilization of unbound granular layers by way of interlock with the aggregate |
|
|
|
090001-00-0404 |
Pre-fabricated compressed mineral wool boards with organic or inorganic finish and with specified fastening system |
|
|
|
090017-00-0404 |
Point supported vertical glazing |
|
|
|
090019-00-0404 |
Kits for ventilated external wall claddings of lightweight boards on subframe with rendering applied in situ with or without thermal insulation |
|
|
|
090020-00-0404 |
Kits for external wall claddings made of agglomerated stone |
|
|
|
090034-00-0404 |
Kit composed by subframe and fixings for fastening cladding and external wall elements |
|
|
|
090035-00-0404 |
Insulated glass unit with structural sealant punctually anchored |
|
|
|
090058-00-0404 |
Ventilated external wall cladding kit comprising a metallic honeycomb panel and its associated fixings |
|
|
|
120001-01-0106 |
Microprismatic retro-reflective sheetings |
120001-00-0106 |
|
|
120003-00-0106 |
Steel lighting columns |
|
|
|
120011-00-0107 |
Flexible plug expansion joints for road bridges with flexible filling based on a synthetic polymer as binder |
|
|
|
130002-00-0304 |
Solid wood slab element - element of dowel jointed timber boards to be used as a structural element in buildings |
|
|
|
130005-00-0304 |
Solid wood slab element to be used as a structural element in buildings |
|
|
|
130010-00-0304 |
Glued laminated timber made of hardwood – structural laminated veneer lumber made of beech |
|
|
|
130011-00-0304 |
Prefabricated wood slab element made of mechanically jointed square-sawn timber members to be used as a structural element in buildings |
|
|
|
130012-00-0304 |
Strength graded structural timber – Square edged logs with wane – Chestnut |
|
|
|
130013-00-0304 |
Solid wood slab element to be used as a structural element in buildings - element of timber boards jointed by dovetail connections |
|
|
|
130019-00-0603 |
Dowel-type fasteners with resin coating |
|
|
|
130022-00-0304 |
Monolithic or laminated beam and wall logs made of timber |
|
|
|
130033-00-0603 |
Nails and screws for use in nailing plates in timber structures |
|
|
|
130087-00-0204 |
Modular construction system |
|
|
|
130089-00-0304 |
Structural wet and/or cold glued finger jointed solid timber |
|
|
|
130090-00-0303 |
Wood-concrete composite slab with dowel-type fasteners |
|
|
|
130118-00-0603 |
Screws for use in timber constructions |
|
|
|
130166-00-0304 |
Strength graded structural timber – steam-cured solid timber with rectangular cross section which may be finger jointed or not – softwood |
|
|
|
130167-00-0304 |
Strength graded structural timber – Square edged logs with wane – Softwood |
|
|
|
130197-00-0304 |
Glued laminated timber made of steam-cured solid timber with rectangular cross section – Softwood |
|
|
|
140015-00-0304 |
Walls, roofs and ceilings made of OSB-panels which are glued together on their surfaces |
|
|
|
150001-00-0301 |
Calcium Sulphoaluminate based Cement |
|
|
|
150002-00-0301 |
Calcium aluminate based refractory cement |
|
|
|
150003-00-0301 |
High strength cement |
|
|
|
150004-00-0301 |
Rapid hardening sulfate resistant calcium sulphoaluminate based cement |
|
|
|
150007-00-0301 |
Portland-pozzolana cement for use in tropical conditions |
|
|
|
150008-00-0301 |
Rapid setting cement |
|
|
|
150009-00-0301 |
Blast Furnace Cement CEM III/A with assessment of sulfate resistance (SR) and optional with low effective alkali content (LA) and/or low heat of hydration (LH) |
|
|
|
160004-00-0301 |
Post-tensioning kits for prestressing of structures |
ETAG 013 |
|
|
160012-00-0301 |
Headed reinforcement steel bars |
|
|
|
160027-00-0301 |
Special filling products for post-tensioning kits |
ETAG 013 |
|
|
180008-00-0704 |
Trapped gully – removable – mechanical closure |
|
|
|
180018-00-0704 |
Flexible couplings for gravity and pressure sewerage and drainage pipes |
|
|
|
190002-00-0502 |
Dry floating flooring kit based on prefabricated interlocked units made of ceramic tiles and rubber mats |
|
|
|
190005-00-0402 |
Terrace decking kit |
|
|
|
200001-00-0602 |
Prefabricated steel and stainless steel wire ropes with end connectors |
|
|
|
200002-00-0602 |
Tension rod system |
|
|
|
200005-00-0103 |
Structural steel piles with hollow sections and rigid splices |
|
|
|
200012-00-0401 |
Spacer kits for built-up metal roof and wall cladding |
|
|
|
200014-00-0103 |
Pile joints and rock shoes for concrete piles |
|
|
|
200017-00-0302 |
Hot rolled products and structural components made of steel grades Q235B, Q235D, Q345B AND Q345D |
|
|
|
200019-00-0102 |
Hexagonal woven mesh gabion boxes and matresses |
|
|
|
200020-00-0102 |
Weldmesh gabion boxes and mattresses |
|
|
|
200022-00-0302 |
Thermo-mechanically rolled long steel products made of weldable fine grain structural steel of special steel grades |
|
|
|
200026-00-0102 |
Steel wire mesh systems for reinforced fill |
|
|
|
200032-00-0602 |
Prefabricated tension rod systems with special end connectors |
|
|
|
200033-00-0602 |
Nailed Shear Connector |
|
|
|
200035-00-0302 |
Roof and wall systems with hidden fastenings |
|
|
|
200036-00-0103 |
Kit for micropiles – Kit with hollow bars for self-drilling micropiles – Hollow bars of seamless steel tubes |
|
|
|
200039-00-0102 |
Hexagonal woven mesh gabion boxes and mattresses with zinc coating |
|
|
|
200043-01-0103 |
Pile pipes made of ductile iron |
200043-00-0103 |
|
|
200050-01-0102 |
Gabion boxes, mattresses and sack gabions made of hexagonal regular twisted mesh with pre-coated zinc and/or zinc+organic coating |
200050-00-0102 |
|
|
200086-00-0602 |
Wire ring connection products |
|
|
|
210004-00-0805 |
Modular element for building services |
|
|
|
210024-00-0504 |
Cement-bonded board |
|
|
|
220006-00-0402 |
Roofing slates made of polypropylene, limestone and fillers |
|
|
|
220007-00-0402 |
Fully supported copper alloy sheet and strip for roofing, external cladding and internal lining |
|
|
|
220008-00-0402 |
Eaves profiles for terraces and balconies |
|
|
|
220010-00-0402 |
Flat plastic sheets for fully supported discontinuous roofing and external cladding |
|
|
|
220013-01-0401 |
Self –supporting ridgelight |
220013-00-0401 |
|
|
220018-00-0401 |
Decentralized energy efficient low-pressure ventilations unit with alternating flow and heat recovery |
|
|
|
220021-00-0402 |
Tubular daylighting devices (TDD) |
|
|
|
220022-00-0401 |
Polycarbonate snow stopper for roof |
|
|
|
220025-00-0401 |
Cantilevered Structural horizontal glazing (structural glass canopy/roof) |
|
|
|
220069-00-0402 |
Flat and profiled (with a pattern) plastic roofing sheets made of recycled material for fully supported discontinuous roofing |
|
|
|
230004-00-0106 |
Wire ring mesh panels |
|
|
|
230005-00-0106 |
Wire rope net panels |
|
|
|
230008-00-0106 |
Double twisted steel wire mesh reinforced or not with ropes |
|
|
|
230011-00-0106 |
Road marking products |
|
|
|
230012-00-0105 |
Additives for asphalt production - bitumen granules made from recycled bituminous roofing felt |
|
|
|
230025-00-0106 |
Flexible facing systems for slope stabilization and rock protection |
|
|
|
260001-00-0303 |
Structural sections made from fibre reinforced polymers (FRP/Glassfiber Composites) |
|
|
|
260002-00-0301 |
Alkali resistant glass fibres containing zirconium dioxide for the use in concrete |
|
|
|
260006-00-0301 |
Polymeric concrete addition |
|
|
|
260007-00-0301 |
Type I addition for concrete, mortar and screed materials – Aqueous solution |
|
|
|
280001-00-0704 |
Preassembled line unit for drainage or infiltration |
|
|
|
290001-00-0701 |
Kit for the transport of cold and hot water inside buildings |
|
|
|
320002-02-0605 |
Coated metal water stop sheet for construction and controlled crack joints in waterproof concrete |
320002-00-0605 320002-01-0605 |
|
|
320008-00-0605 |
Swellable joint sealing tape on the basis of bentonite for construction joints in watertight concrete |
|
|
|
330001-00-0602 |
Expanding Structural Bolting Assemblies for Blind Fastening |
|
|
|
330008-02-0601 |
Anchor channels |
330008-00-0601 330008-01-0601 |
|
|
330011-00-0601 |
Adjustable concrete screws |
|
|
|
330012-00-0601 |
Cast-in anchor with internal threaded socket |
|
|
|
330014-00-0601 |
Mechanical expansion fastener for use in autoclaved aerated concrete |
|
|
|
330046-01-0602 |
Fastening Screws for Metal Members and Sheeting |
330046-00-0602 |
|
|
330047-01-0602 |
Fastening screws for sandwich panels |
330047-00-0602 |
|
|
330075-00-0601 |
Elevator lifting device |
|
|
|
330076-00-0604 |
Metal injection anchors for use in masonry |
ETAG 29 |
|
|
330079-00-0602 |
Floor Fixing Assemblies for use in Checker Plate or Open Bar Grating |
|
|
|
330080-00-0602 |
High Slip Resistance Clamp (HSR) Assembly |
|
|
|
330083-01-0601 |
Power-actuated fastener for multiple use in concrete for non-structural applications |
330083-00-0601 |
|
|
330084-00-0601 |
Steel-plate with cast-in anchors |
|
|
|
330153-00-0602 |
Cartridge fired pin for connections of thin gauge steel members and sheeting |
|
|
|
330155-00-0602 |
Self-adjustable clamp assembly |
|
|
|
330196-01-0604 |
Plastic anchors made of virgin or non-virgin material for fixing of external thermal insulation composite systems with rendering |
330196-00-0604 ETAG 014 |
|
|
330232-00-0601 |
Mechanical fasteners for use in concrete |
ETAG 001-1 ETAG 001-2 ETAG 001-3 ETAG 001-4 |
|
|
330389-00-0601 |
Point connector made of glass fibre reinforced polymer for sandwich walls |
|
|
|
330499-00-0601 |
Bonded fasteners for use in concrete |
ETAG 001-5 |
|
|
330667-00-0602 |
Hot-rolled mounting channel |
|
|
|
330924-00-0601 |
Cast-in anchor bolts of ribbed reinforcing steel |
|
|
|
330965-00-0601 |
Powder-actuated fastener for the fixing of ETICS in concrete |
|
|
|
340002-00-0204 |
Panels of steel wires with incorporated thermal insulation for a whole structure |
|
|
|
340006-00-0506 |
Prefabricated stair kits |
ETAG 008 |
|
|
340020-00-0106 |
Flexible kits for retaining debris flows and shallow landslides/open hill debris flows |
|
|
|
340025-00-0403 |
Substructure kit for heated buildings |
|
|
|
340037-00-0204 |
Light weight steel/wood load bearing roof elements |
|
|
|
350003-00-1109 |
Kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of mechanically pre-coated steel sheet) and accessories |
|
|
|
350005-00-1104 |
Intumescent products for fire sealing and fire stopping purposes |
|
|
|
350022-01-1107 |
Kit for closure system for conveyor systems |
350022-00-1107 |
|
|
350134-00-1104 |
Fire proof water trap with intumescent fire seal (combined with a stainless steel floor gully penetration |
|
|
|
350140-00-1106 |
Renderings and rendering kits for fire resisting applications |
ETAG 018-1 ETAG 018-3 |
|
|
350141-00-1106 |
Linear joint and gap seals |
ETAG 026-1 ETAG 026-3 |
|
|
350142-00-1106 |
Fire protective board, slab and mat products and kits |
ETAG 018-1 ETAG 018-4 |
|
|
350402-00-1106 |
Reactive coatings for fire protection of steel elements |
ETAG 018-1 ETAG 018-2 |
|
|
350454-00-1104 |
Fire stopping and fire sealing products - Penetration seals |
ETAG 026-1 ETAG 026-2 |
|
|
360001-00-0803 |
Ventilation system made of mineral wool covered with film on outside and inside |
|
|
|
360005-00-0604 |
Cavity Tray |
|
|
Note:
European Assessment Documents (EAD) are adopted by the European Organisation for Technical Assessment (EOTA) in English. The European Commission is not responsible for the correctness of the titles which have been provided by EOTA for publication in the Official Journal of the European Union.
Publication of the references of European Assessment Documents in the Official Journal of the European Union does not imply that the European Assessment Documents are available in all the official languages of the European Union.
The European Organisation for Technical Assessment (http://www.eota.eu) shall keep the European Assessment Document available by electronic means in line with the provisions of point 8 of Annex II to Regulation (EU) No 305/2011.
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.
NOTICES FROM MEMBER STATES
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 90/13 |
Commission information notice pursuant to Article 16(4) of Regulation (EC) No 1008/2008 of the European Parliament and of the Council on common rules for the operation of air services in the Community
Imposition of public service obligations in respect of scheduled air services
(Text with EEA relevance)
(2018/C 90/05)
|
Member State |
Spain |
||||||||||
|
Routes concerned |
Badajoz-Madrid Badajoz-Barcelona |
||||||||||
|
Date of entry into force of the public service obligations |
The day following the publication of this information notice |
||||||||||
|
Address where the text and any other information or documentation related to the public service obligations can be obtained |
|
In the event that no air carrier submits a programme of services compliant with the public service obligations imposed, access will be restricted to a single air carrier through the corresponding public tender procedure, in accordance with Article 16(9) of Regulation (EC) No 1008/2008.
V Announcements
PROCEDURES RELATING TO THE IMPLEMENTATION OF COMPETITION POLICY
European Commission
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 90/14 |
Prior notification of a concentration
(Case M.8836 — 3i/Sits)
Candidate case for simplified procedure
(Text with EEA relevance)
(2018/C 90/06)
|
1. |
On 1 March 2018, the Commission received notification of a proposed concentration pursuant to Article 4 of Council Regulation (EC) No 139/2004 (1). This notification concerns the following undertakings:
3i Group plc (3i) will acquire within the meaning of Article 3(1)(b) of the Merger Regulation, and through Crown Bidco BV, control of the whole of Sits Holding BV (Sits). The concentration is accomplished by way of purchase of shares. |
|
2. |
The business activities of the undertakings concerned are: — 3i: investment management focused on midmarket private equity and infrastructure investments.3i invests in three core sectors: business and technology services, consumer and industrial, — Crown Bidco BV: vehicle company created for the purpose of this transaction, — Sits: manufacture, under the name Royal Sanders, of personal care products, such as: bath and shower, skin care products, deodorants and perfumes. It manufactures primarily for retailers and brand owners. It also owns a portfolio of branded care products which includes Van Gils, Sanicur and Odorex. |
|
3. |
On preliminary examination, the Commission finds that the notified transaction could fall within the scope of the Merger Regulation. However, the final decision on this point is reserved. Pursuant to the Commission Notice on a simplified procedure for treatment of certain concentrations under the Council Regulation (EC) No 139/2004 (2) it should be noted that this case is a candidate for treatment under the procedure set out in the Notice. |
|
4. |
The Commission invites interested third parties to submit their possible observations on the proposed operation to the Commission. Observations must reach the Commission not later than 10 days following the date of this publication. The following reference should always be specified: M.8836 — 3i/Sits Observations can be sent to the Commission by email, by fax, or by post. Please use the contact details below:
|
(1) OJ L 24, 29.1.2004, p. 1 (the ‘Merger Regulation’).
(2) OJ C 366, 14.12.2013, p. 5.
OTHER ACTS
European Commission
|
9.3.2018 |
EN |
Official Journal of the European Union |
C 90/16 |
Notice for the attention of Salim Mustafa Muhammad Al-Mansur, Umar Mahmud Irhayyim Al-Kubaysi and Al-Kawthar Money Exchange, whose names were added to the list referred to in Articles 2, 3 and 7 of Council Regulation (EC) No 881/2002 imposing certain specific restrictive measures directed against certain persons and entities associated with the ISIL (Da'esh) and Al-Qaida organisations, by virtue of Commission Implementing Regulation (EU) 2018/349
(2018/C 90/07)
|
1. |
Council Decision (CFSP) 2016/1693 (1) calls upon the Union to freeze the funds and economic resources of the members of the ISIL (Da'esh) and Al-Qaida organisation and other individuals, groups, undertakings and entities associated with them, as referred to in the list drawn up pursuant to UNSCR 1267(1999) and 1333(2000) to be updated regularly by the UN Committee established pursuant to UNSCR 1267(1999). The list drawn up by this UN Committee comprises:
Acts or activities indicating that an individual, group, undertaking, or entity is “associated with” ISIL (Da'esh) and Al-Qaida include:
|
|
2. |
The UN Security Council Committee approved on 6 March 2018 the addition of the entries of Salim Mustafa Muhammad Al-Mansur, Umar Mahmud Irhayyim Al-Kubaysi and Al-Kawthar Money Exchange to the ISIL (Da'esh) and Al-Qaida Sanctions Committee's list. Salim Mustafa Muhammad Al-Mansur, Umar Mahmud Irhayyim Al-Kubaysi and Al-Kawthar Money Exchange may submit at any time a request to the UN Ombudsperson, together with any supporting documentation, for the decision to include them in the UN list referred to above, to be reconsidered. Such request should be sent to the following address:
See for more information at https://www.un.org/sc/suborg/en/sanctions/1267/aq_sanctions_list/procedures-for-delisting. |
|
3. |
Further to the UN decision referred to in paragraph 2, the Commission has adopted Implementing Regulation (EU) 2018/349 (2), which amends Annex I to Council Regulation (EC) No 881/2002 of 27 May 2002 imposing certain specific restrictive measures directed against certain persons and entities associated with the ISIL (Da'esh) and Al-Qaida organisations (3). The amendment, made pursuant to Article 7(1)(a) and 7a(1) of Regulation (EC) No 881/2002, adds the names of Salim Mustafa Muhammad Al-Mansur, Umar Mahmud Irhayyim Al-Kubaysi and Al-Kawthar Money Exchange to the list in Annex I of that Regulation (“Annex I”). The following measures of Regulation (EC) No 881/2002 apply to the individuals and entities included in Annex I:
|
|
4. |
Article 7a of Regulation (EC) No 881/2002 provides for a review process where observations on the grounds for listing are submitted by those listed. Individuals and entities added to Annex I by Implementing Regulation (EU) 2018/349 may make a request for the grounds for their listing to the Commission. This request should be sent to:
|
|
5. |
The attention of the individuals and entities concerned is also drawn to the possibility of challenging Implementing Regulation (EU) 2018/349 before the General Court of the European Union, in accordance with the conditions laid down in the fourth and sixth paragraphs of Article 263 of the Treaty on the Functioning of the European Union. |
|
6. |
For good order, the attention of the individuals and entities included in Annex I is drawn to the possibility of making an application to the competent authorities in the relevant Member State(s), as listed in Annex II to Regulation (EC) No 881/2002, in order to obtain an authorisation to use frozen funds and economic resources for essential needs or specific payments in accordance with Article 2a of that Regulation. |
(1) OJ L 255, 21.9.2016, p. 25.
(3) OJ L 139, 29.5.2002, p. 9.