ISSN 1977-091X
Official Journal
of the European Union
C 249
English edition
Information and Notices
Volume 59
8 July 2016
|
ISSN 1977-091X |
||
|
Official Journal of the European Union |
C 249 |
|
|
|
||
|
English edition |
Information and Notices |
Volume 59 |
|
|
Corrigenda |
|
|
2016/C 249/05 |
|
|
|
|
|
(1) Text with EEA relevance |
|
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
|
8.7.2016 |
EN |
Official Journal of the European Union |
C 249/1 |
Commission communication in the framework of the implementation of Directive 1999/5/EC of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2016/C 249/01)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
Article of Directive 1999/5/EC |
|
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
|
Cenelec |
EN 41003:2008 Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system |
10.8.2010 |
EN 41003:1998 Note 2.1 |
1.7.2011 |
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
Cenelec |
EN 50360:2001 Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz) |
26.7.2001 |
|
|
Article 3(1)(a) |
|
|
EN 50360:2001/A1:2012 |
23.10.2012 |
Note 3 |
13.2.2015 |
|
|
|
EN 50360:2001/AC:2006 |
This is the first publication |
|
|
|
|
Cenelec |
EN 50364:2010 Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications |
29.12.2010 |
EN 50364:2001 Note 2.1 |
1.11.2012 |
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
Cenelec |
EN 50385:2002 Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110 MHz - 40 GHz) — General public |
7.12.2002 |
|
|
Article 3(1)(a) |
|
Cenelec |
EN 50401:2006 Product standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service |
21.12.2006 |
|
|
Article 3(1)(a) |
|
|
EN 50401:2006/A1:2011 |
11.4.2012 |
Note 3 |
29.8.2014 |
|
|
Cenelec |
EN 50561-1:2013 Power line communication apparatus used in low-voltage installations — Radio disturbance characteristics — Limits and methods of measurement — Part 1: Apparatus for in-home use |
12.9.2014 |
EN 55022:2010 EN 55032:2012 Note 2.3 |
10.9.2016 |
Article 3(1)(b) |
|
|
EN 50561-1:2013/AC:2015 |
10.7.2015 |
|
|
|
|
Cenelec |
EN 50566:2013 Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz — 6 GHz) |
12.10.2013 |
|
|
Article 3(1)(a) |
|
|
EN 50566:2013/AC:2014 |
12.9.2014 |
|
|
|
|
Cenelec |
EN 55022:2010 Information technology equipment — Radio disturbance characteristics — Limits and methods of measurement CISPR 22:2008 (Modified) |
21.9.2011 |
EN 55022:2006 + A1:2007 Note 2.1 |
1.12.2013 |
Article 3(1)(b) |
|
|
EN 55022:2010/AC:2011 |
11.4.2012 |
|
|
|
|
Cenelec |
EN 55024:2010 Information technology equipment — Immunity characteristics — Limits and methods of measurement CISPR 24:2010 |
21.9.2011 |
EN 55024:1998 + A1:2001 + A2:2003 |
1.12.2013 |
Article 3(1)(b) |
|
Cenelec |
EN 55032:2012 Electromagnetic compatibility of multimedia equipment — Emission requirements CISPR 32:2012 |
12.10.2013 |
EN 55022:2010 Note 2.1 |
5.3.2017 |
Article 3(1)(b) |
|
|
EN 55032:2012/AC:2013 |
12.9.2014 |
|
|
|
|
Cenelec |
EN 60065:2002 Audio, video and similar electronic apparatus — Safety requirements IEC 60065:2001 (Modified) |
7.12.2002 |
EN 60065:1998 Note 2.1 |
1.3.2007 |
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
|
EN 60065:2002/A1:2006 IEC 60065:2001/A1:2005 (Modified) |
25.9.2007 |
Note 3 |
1.12.2008 |
|
|
|
EN 60065:2002/A11:2008 |
10.8.2010 |
Note 3 |
1.7.2010 |
|
|
|
EN 60065:2002/A12:2011 |
21.9.2011 |
Note 3 |
24.1.2013 |
|
|
|
EN 60065:2002/A2:2010 IEC 60065:2001/A2:2010 (Modified) |
15.4.2011 |
Note 3 |
1.10.2013 |
|
|
|
EN 60065:2002/AC:2006 |
This is the first publication |
|
|
|
|
|
EN 60065:2002/AC:2007 |
This is the first publication |
|
|
|
|
Cenelec |
EN 60065:2014 Audio, video and similar electronic apparatus - Safety requirements IEC 60065:2014 (Modified) |
17.4.2015 |
EN 60065:2002 + A11:2008 + A12:2011 + A1:2006 + A1:2006 + A2:2010 Note 2.1 |
17.11.2017 |
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
|
EN 60065:2014/AC:2016 |
This is the first publication |
|
|
|
|
Cenelec |
EN 60215:1989 Safety requirements for radio transmitting equipment IEC 60215:1987 |
5.4.2001 |
|
|
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
|
EN 60215:1989/A1:1992 IEC 60215:1987/A1:1990 |
5.4.2001 |
Note 3 |
1.6.1993 |
|
|
|
EN 60215:1989/A2:1994 IEC 60215:1987/A2:1993 |
5.4.2001 |
Note 3 |
15.7.1995 |
|
|
Cenelec |
EN 60730-1:2011 Automatic electrical controls for household and similar use — Part 1: General requirements IEC 60730-1:2010 (Modified) |
23.10.2012 |
|
|
Article 3(1)(a) (and Article 2 2006/95/EC) + Article 3(1)(b) |
|
Cenelec |
EN 60825-1:2007 Safety of laser products — Part 1: Equipment classification and requirements IEC 60825-1:2007 |
4.11.2008 |
EN 60825-1:1994 + A11:1996 + A1:2002 + A2:2001 Note 2.1 |
1.9.2010 |
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
Cenelec |
EN 60825-1:2014 Safety of laser products — Part 1: Equipment classification and requirements IEC 60825-1:2014 |
10.7.2015 |
EN 60825-1:2007 Note 2.1 |
19.6.2017 |
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
Cenelec |
EN 60825-2:2004 Safety of laser products — Part 2: Safety of optical fibre communication systems (OFCS) IEC 60825-2:2004 |
5.10.2005 |
EN 60825-2:2000 Note 2.1 |
1.9.2007 |
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
|
EN 60825-2:2004/A1:2007 IEC 60825-2:2004/A1:2006 |
25.9.2007 |
Note 3 |
1.2.2010 |
|
|
|
EN 60825-2:2004/A2:2010 IEC 60825-2:2004/A2:2010 |
15.4.2011 |
Note 3 |
1.10.2013 |
|
|
Cenelec |
EN 60825-4:2006 Safety of laser products — Part 4: Laser guards IEC 60825-4:2006 |
25.9.2007 |
EN 60825-4:1997 + A1:2002 + A2:2003 Note 2.1 |
1.10.2009 |
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
|
EN 60825-4:2006/A1:2008 IEC 60825-4:2006/A1:2008 |
15.12.2009 |
Note 3 |
1.9.2011 |
|
|
|
EN 60825-4:2006/A2:2011 IEC 60825-4:2006/A2:2011 |
21.9.2011 |
Note 3 |
3.5.2014 |
|
|
Cenelec |
EN 60825-12:2004 Safety of laser products — Part 12: Safety of free space optical communication systems used for transmission of information IEC 60825-12:2004 |
30.3.2005 |
|
|
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
Cenelec |
EN 60950-1:2006 Information technology equipment — Safety — Part 1: General requirements IEC 60950-1:2005 (Modified) |
25.9.2007 |
EN 60950-1:2001 + A11:2004 Note 2.1 |
1.12.2010 |
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
|
EN 60950-1:2006/AC:2011 |
11.4.2012 |
|
|
|
|
|
EN 60950-1:2006/A11:2009 |
10.8.2010 |
Note 3 |
1.12.2010 |
|
|
|
EN 60950-1:2006/A12:2011 |
21.9.2011 |
Note 3 |
24.1.2013 |
|
|
|
EN 60950-1:2006/A1:2010 IEC 60950-1:2005/A1:2009 (Modified) |
29.12.2010 |
Note 3 |
1.3.2013 |
|
|
|
EN 60950-1:2006/A2:2013 IEC 60950-1:2005/A2:2013 (Modified) |
12.9.2014 |
Note 3 |
2.7.2016 |
|
|
Cenelec |
EN 60950-22:2006 Information technology equipment — Safety — Part 22: Equipment installed outdoors IEC 60950-22:2005 (Modified) |
25.9.2007 |
|
|
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
|
EN 60950-22:2006/AC:2008 |
This is the first publication |
|
|
|
|
Cenelec |
EN 60950-23:2006 Information technology equipment — Safety — Part 23: Large data storage equipment IEC 60950-23:2005 |
25.9.2007 |
|
|
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
|
EN 60950-23:2006/AC:2008 |
This is the first publication |
|
|
|
|
Cenelec |
EN 61000-3-2:2006 Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic current emissions (equipment input current <= 16 A per phase) IEC 61000-3-2:2005 |
25.9.2007 |
EN 61000-3-2:2000 + A2:2005 Note 2.1 |
1.2.2009 |
Article 3(1)(b) |
|
|
EN 61000-3-2:2006/A1:2009 IEC 61000-3-2:2005/A1:2008 |
10.8.2010 |
Note 3 |
1.7.2012 |
|
|
|
EN 61000-3-2:2006/A2:2009 IEC 61000-3-2:2005/A2:2009 |
10.8.2010 |
Note 3 |
1.7.2012 |
|
|
Cenelec |
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) IEC 61000-3-2:2014 |
17.4.2015 |
EN 61000-3-2:2006 + A1:2009 + A2:2009 Note 2.1 |
30.6.2017 |
Article 3(1)(b) |
|
Cenelec |
EN 61000-3-3:2008 Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection IEC 61000-3-3:2008 |
15.12.2009 |
EN 61000-3-3:1995 + A1:2001 Note 2.1 |
1.9.2011 |
Article 3(1)(b) |
|
Cenelec |
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection IEC 61000-3-3:2013 |
12.9.2014 |
EN 61000-3-3:2008 Note 2.1 |
18.6.2016 |
Article 3(1)(b) |
|
Cenelec |
EN 61000-3-11:2000 Electromagnetic compatibility (EMC) — Part 3-11: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems — Equipment with rated current <= 75 A and subject to conditional connection IEC 61000-3-11:2000 |
5.4.2001 |
Relevant generic standard(s) Note 2.1 |
1.11.2003 |
Article 3(1)(b) |
|
Cenelec |
EN 61000-3-12:2011 Electromagnetic compatibility (EMC) — Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase IEC 61000-3-12:2011 + IS1:2012 |
23.10.2012 |
EN 61000-3-12:2005 Note 2.1 |
16.6.2014 |
Article 3(1)(b) |
|
Cenelec |
EN 61000-6-1:2007 Electromagnetic compatibility (EMC) — Part 6-1: Generic standards — Immunity for residential, commercial and light-industrial environments IEC 61000-6-1:2005 |
25.9.2007 |
EN 61000-6-1:2001 Note 2.1 |
1.12.2009 |
Article 3(1)(b) |
|
Cenelec |
EN 61000-6-2:2005 Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity for industrial environments IEC 61000-6-2:2005 |
24.8.2006 |
EN 61000-6-2:2001 Note 2.1 |
1.6.2008 |
Article 3(1)(b) |
|
|
EN 61000-6-2:2005/AC:2005 |
This is the first publication |
|
|
|
|
Cenelec |
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) — Part 6-3: Generic standards — Emission standard for residential, commercial and light-industrial environments IEC 61000-6-3:2006 |
25.9.2007 |
EN 61000-6-3:2001 + A11:2004 Note 2.1 |
1.12.2009 |
Article 3(1)(b) |
|
|
EN 61000-6-3:2007/A1:2011/AC:2012 |
12.10.2013 |
|
|
|
|
|
EN 61000-6-3:2007/A1:2011 IEC 61000-6-3:2006/A1:2010 |
21.9.2011 |
Note 3 |
12.1.2014 |
|
|
Cenelec |
EN 61000-6-4:2007 Electromagnetic compatibility (EMC) — Part 6-4: Generic standards — Emission standard for industrial environments IEC 61000-6-4:2006 |
25.9.2007 |
EN 61000-6-4:2001 Note 2.1 |
1.12.2009 |
Article 3(1)(b) |
|
|
EN 61000-6-4:2007/A1:2011 IEC 61000-6-4:2006/A1:2010 |
21.9.2011 |
Note 3 |
12.1.2014 |
|
|
Cenelec |
EN 62311:2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) IEC 62311:2007 (Modified) |
4.11.2008 |
|
|
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
Cenelec |
EN 62368-1:2014 Audio/video, information and communication technology equipment — Part 1: Safety requirements (IEC 62368-1:2014, modified) IEC 62368-1:2014 (Modified) |
17.4.2015 |
EN 60065:2014 EN 60950-1:2006 + A11:2009 + A12:2011 + A1:2010 + A2:2013 Note 2.1 |
20.6.2019 |
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
|
EN 62368-1:2014/AC:2015 |
This is the first publication |
|
|
|
|
|
EN 62368-1:2014/AC:2015 |
This is the first publication |
|
|
|
|
|
EN 62368-1:2014/AC:2015 |
10.7.2015 |
|
|
|
|
Cenelec |
EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) IEC 62479:2010 (Modified) |
15.4.2011 |
EN 50371:2002 Note 2.1 |
1.9.2013 |
Article 3(1)(a) (and Article 2 2006/95/EC) |
|
ETSI |
EN 300 065-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE directive |
15.12.2009 |
EN 300 065-2 V1.1.1 Note 2.1 |
30.4.2011 |
Article 3(2) |
|
ETSI |
EN 300 065-3 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Part 3: Harmonized EN covering the essential requirements of article 3.3 (e) of the R&TTE directive |
15.12.2009 |
EN 300 065-3 V1.1.1 Note 2.1 |
28.2.2011 |
Article 3(3) |
|
ETSI |
EN 300 086-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 300 086-2 V1.2.1 Note 2.1 |
31.3.2012 |
Article 3(2) |
|
ETSI |
EN 300 113-2 V1.5.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
11.4.2012 |
EN 300 113-2 V1.4.2 Note 2.1 |
31.8.2013 |
Article 3(2) |
|
ETSI |
EN 300 135-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);Land Mobile Service; Citizens' Band (CB) radio equipment; Angle-modulated Citizens' Band radio equipment (PR 27 Radio Equipment); Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
4.11.2008 |
EN 300 135-2 V1.1.1 Note 2.1 |
30.11.2009 |
Article 3(2) |
|
ETSI |
EN 300 219-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
26.7.2001 |
|
|
Article 3(2) |
|
ETSI |
EN 300 220-2 V2.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
23.10.2012 |
EN 300 220-2 V2.3.1 Note 2.1 |
28.2.2014 |
Article 3(2) |
|
ETSI |
EN 300 224-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
5.4.2001 |
|
|
Article 3(2) |
|
ETSI |
EN 300 296-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.10.2013 |
EN 300 296-2 V1.3.1 Note 2.1 |
31.5.2015 |
Article 3(2) |
|
ETSI |
EN 300 328 V1.8.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
23.10.2012 |
EN 300 328 V1.7.1 Note 2.1 |
31.12.2014 |
Article 3(2) |
|
ETSI |
EN 300 328 V1.9.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
17.4.2015 |
EN 300 328 V1.8.1 Note 2.1 |
30.11.2016 |
Article 3(2) |
|
ETSI |
EN 300 330-2 V1.5.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 300 330-2 V1.3.1 Note 2.1 |
30.11.2011 |
Article 3(2) |
|
ETSI |
EN 300 330-2 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
17.4.2015 |
EN 300 330-2 V1.5.1 Note 2.1 |
30.11.2016 |
Article 3(2) |
|
ETSI |
EN 300 341-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile service (RP 02); Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
5.4.2001 |
|
|
Article 3(2) |
|
ETSI |
EN 300 373-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime mobile transmitters and receivers for use in the MF and HF bands; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 300 373-2 V1.1.1 Note 2.1 |
30.9.2011 |
Article 3(2) |
|
ETSI |
EN 300 373-3 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime mobile transmitters and receivers for use in the MF and HF bands; Part 3: Harmonized EN covering essential requirements under article 3.3(e) of the R&TTE Directive; Equipment with integrated or associated equipment for Class E Digital Selective Calling (DSC) |
10.8.2010 |
EN 300 373-3 V1.1.1 Note 2.1 |
30.9.2011 |
Article 3(3) |
|
ETSI |
EN 300 390-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
14.2.2001 |
ETS 300 390/A1 ED.1 Note 2.1 |
30.4.2001 |
Article 3(2) |
|
ETSI |
EN 300 422-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
11.4.2012 |
EN 300 422-2 V1.2.2 Note 2.1 |
31.5.2013 |
Article 3(2) |
|
ETSI |
EN 300 422-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless microphones in the 25 MHz to 3 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
This is the first publication |
EN 300 422-2 V1.3.1 Note 2.1 |
28.2.2017 |
Article 3(2) |
|
ETSI |
EN 300 433-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Citizens' Band (CB) radio equipment; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
11.4.2012 |
EN 300 433-2 V1.1.2 Note 2.1 |
30.3.2013 |
Article 3(2) |
|
ETSI |
EN 300 440-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
29.12.2010 |
EN 300 440-2 V1.3.1 Note 2.1 |
31.5.2012 |
Article 3(2) |
|
ETSI |
EN 300 454-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
14.2.2001 |
|
|
Article 3(2) |
|
ETSI |
EN 300 471-2 V1.1.1 Electromagnetic Compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Rules for Access and the Sharing of common used channels by equipment complying with EN 300 113; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
26.7.2001 |
|
|
Article 3(2) |
|
ETSI |
EN 300 609-4 V10.2.1 Global System for Mobile communications (GSM); Part 4: Harmonized EN for GSM Repeaters covering the essential requirements of article 3.2 of the R&TTE Directive |
12.10.2013 |
EN 300 609-4 V9.2.1 Note 2.1 |
31.8.2014 |
Article 3(2) |
|
ETSI |
EN 300 674-2-1 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s/250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive; Sub-part 1: Requirements for the Road Side Units (RSU) |
24.8.2006 |
|
|
Article 3(2) |
|
ETSI |
EN 300 674-2-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s/250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive; Sub-part 2: Requirements for the On-Board Units (OBU) |
24.8.2006 |
|
|
Article 3(2) |
|
ETSI |
EN 300 676-2 V1.5.1 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
11.4.2012 |
EN 300 676-2 V1.4.1 Note 2.1 |
31.5.2013 |
Article 3(2) |
|
ETSI |
EN 300 698-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 300 698-2 V1.1.1 Note 2.1 |
31.8.2010 |
Article 3(2) |
|
ETSI |
EN 300 698-3 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Part 3: Harmonized EN covering essential requirements of article 3.3 (e) of the R&TTE Directive |
10.8.2010 |
EN 300 698-3 V1.1.1 Note 2.1 |
31.8.2010 |
Article 3(3) |
|
ETSI |
EN 300 718-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
26.7.2001 |
|
|
Article 3(2) |
|
ETSI |
EN 300 718-3 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering the essential requirements of article 3.3e of the R&TTE Directive |
30.4.2004 |
EN 300 718-3 V1.1.1 Note 2.1 |
30.11.2005 |
Article 3(3) |
|
ETSI |
EN 300 720-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ultra-High Frequency (UHF) on-board vessels communications systems and equipment; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
3.6.2008 |
EN 300 720-2 V1.1.1 Note 2.1 |
31.7.2009 |
Article 3(2) |
|
ETSI |
EN 300 761-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Automatic Vehicle Identification (AVI) for railways operating in the 2,45 GHz frequency range; Part 2: Harmonized standard covering essential requirements under article 3.2 of the R&TTE Directive |
26.7.2001 |
|
|
Article 3(2) |
|
ETSI |
EN 301 025-2 V1.5.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.9.2014 |
EN 301 025-2 V1.4.1 Note 2.1 |
30.6.2015 |
Article 3(2) |
|
ETSI |
EN 301 025-3 V1.5.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class ‘D’ Digital Selective Calling (DSC); Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive |
12.9.2014 |
EN 301 025-3 V1.4.1 Note 2.1 |
30.6.2015 |
Article 3(3) |
|
ETSI |
EN 301 091-2 V1.3.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
25.9.2007 |
EN 301 091-2 V1.2.1 Note 2.1 |
30.6.2008 |
Article 3(2) |
|
ETSI |
EN 301 166-2 V1.2.3 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 301 166-2 V1.2.2 Note 2.1 |
31.8.2011 |
Article 3(2) |
|
ETSI |
EN 301 178-2 V1.2.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
25.9.2007 |
EN 301 178-2 V1.1.1 Note 2.1 |
31.10.2008 |
Article 3(2) |
|
ETSI |
EN 301 357-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless audio devices in the range 25 MHz to 2 000 MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
15.12.2009 |
EN 301 357-2 V1.3.1 Note 2.1 |
31.8.2010 |
Article 3(2) |
|
ETSI |
EN 301 360 V1.2.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards geostationary satellites in the 27,5 GHz to 29,5 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive |
24.8.2006 |
EN 301 360 V1.1.3 Note 2.1 |
30.11.2007 |
Article 3(2) |
|
ETSI |
EN 301 406 V2.1.1 Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for Digital Enhanced Cordless Telecommunications (DECT) covering the essential requirements under article 3.2 of the R&TTE Directive; Generic radio |
15.12.2009 |
EN 301 406 V1.5.1 Note 2.1 |
30.4.2011 |
Article 3(2) |
|
ETSI |
EN 301 423 V1.1.1 Electromagnetic Compatibility and Radio spectrum Matters (ERM); Harmonized Standard for the Terrestrial Flight Telecommunications System under article 3.2 of the R&TTE Directive |
5.4.2001 |
TBR 023 ED.1 Note 2.1 |
30.9.2002 |
Article 3(2) |
|
ETSI |
EN 301 426 V1.2.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Low data rate Land Mobile satellite Earth Stations (LMES) and Maritime Mobile satellite Earth Stations (MMES) not intended for distress and safety communications operating in the 1,5 /1,6 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive |
9.3.2002 |
EN 301 426 V1.1.1 Note 2.1 |
30.6.2002 |
Article 3(2) |
|
ETSI |
EN 301 427 V1.2.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Low data rate Mobile satellite Earth Stations (MESs) except aeronautical mobile satellite earth stations, operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive |
30.3.2005 |
EN 301 427 V1.1.1 Note 2.1 |
31.8.2003 |
Article 3(2) |
|
ETSI |
EN 301 428 V1.3.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive |
24.8.2006 |
EN 301 428 V1.2.1 Note 2.1 |
30.6.2007 |
Article 3(2) |
|
ETSI |
EN 301 430 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite News Gathering Transportable Earth Stations (SNG TES) operating in the 11-12/13-14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive |
14.2.2001 |
TBR 030 ED.1 Note 2.1 |
31.1.2001 |
Article 3(2) |
|
ETSI |
EN 301 441 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 1,6 /2,4 GHz bands under the Mobile Satellite Service (MSS) covering essential requirements under Article 3.2 of the R&TTE directive |
14.2.2001 |
TBR 041 ED.1 Note 2.1 |
31.1.2001 |
Article 3(2) |
|
ETSI |
EN 301 442 V1.2.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 2,0 GHz bands under the Mobile Satellite Service (MSS) covering essential requirements under article 3.2 of the R&TTE directive |
29.12.2010 |
EN 301 442 V1.1.1 Note 2.1 |
31.5.2012 |
Article 3(2) |
|
ETSI |
EN 301 443 V1.3.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive |
24.8.2006 |
EN 301 443 V1.2.1 Note 2.1 |
30.11.2007 |
Article 3(2) |
|
ETSI |
EN 301 444 V1.2.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Land Mobile Earth Stations (LMES) operating in the 1,5 GHz and 1,6 GHz bands providing voice and/or data communications covering essential requirements of article 3.2 of the R&TTE directive |
11.4.2012 |
EN 301 444 V1.1.1 Note 2.1 |
30.4.2015 |
Article 3(2) |
|
ETSI |
EN 301 444 V1.2.2 Satellite Earth Stations and Systems (SES); Harmonized EN for Land Mobile Earth Stations (LMES) operating in the 1,5 GHz and 1,6 GHz bands providing voice and/or data communications covering essential requirements of article 3.2 of the R&TTE directive |
12.10.2013 |
EN 301 444 V1.2.1 Note 2.1 |
30.9.2016 |
Article 3(2) |
|
ETSI |
EN 301 447 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for satellite Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering essential requirements of article 3.2 of the R&TTE directive |
3.6.2008 |
|
|
Article 3(2) |
|
ETSI |
EN 301 449 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);Harmonized EN for CDMA spread spectrum base stations operating in the 450 MHz cellular band (CDMA 450) and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR) covering essential requirements of article 3.2 of the R&TTE Directive |
21.12.2006 |
|
|
Article 3(2) |
|
ETSI |
EN 301 459 V1.4.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit in the 29,5 GHz to 30,0 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive |
25.9.2007 |
EN 301 459 V1.3.1 Note 2.1 |
31.3.2009 |
Article 3(2) |
|
ETSI |
EN 301 489-1 V1.9.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements |
11.4.2012 |
EN 301 489-1 V1.8.1 Note 2.1 |
30.6.2013 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-10 V1.3.1 ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment |
7.12.2002 |
EN 301 489-10 V1.2.1 Note 2.1 |
30.11.2005 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-11 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 11: Specific conditions for terrestrial sound broadcasting service transmitters |
24.8.2006 |
EN 301 489-11 V1.2.1 Note 2.1 |
30.11.2007 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-12 V2.2.2 Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS) |
15.12.2009 |
EN 301 489-12 V1.2.1 Note 2.1 |
30.6.2010 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-13 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 13: Specific conditions for Citizens' Band (CB) radio and ancillary equipment (speech and non-speech) |
7.12.2002 |
EN 301 489-13 V1.1.1 Note 2.1 |
30.11.2005 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-14 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 14: Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters |
12.11.2003 |
EN 301 489-14 V1.1.1 Note 2.1 |
31.7.2006 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-15 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 15: Specific conditions for commercially available amateur radio equipment |
7.12.2002 |
EN 301 489-15 V1.1.1 Note 2.1 |
30.11.2005 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-16 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 16: Specific conditions for analogue cellular radio communications equipment, mobile and portable |
7.12.2002 |
EN 301 489-16 V1.1.1 Note 2.1 |
30.11.2005 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-17 V2.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems |
23.10.2012 |
EN 301 489-17 V2.1.1 Note 2.1 |
31.5.2014 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-18 V1.3.1 ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment |
7.12.2002 |
EN 301 489-18 V1.2.1 Note 2.1 |
30.11.2005 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-19 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communication |
7.12.2002 |
EN 301 489-19 V1.1.1 Note 2.1 |
30.11.2005 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 2: Specific conditions for radio paging equipment |
7.12.2002 |
EN 301 489-2 V1.2.1 Note 2.1 |
30.11.2005 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-20 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS) |
7.12.2002 |
EN 301 489-20 V1.1.1 Note 2.1 |
30.11.2005 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-22 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific requirements for ground-based VHF aeronautical mobile and fixed radio equipment |
30.4.2004 |
EN 301 489-22 V1.2.1 Note 2.1 |
28.2.2007 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-24 V1.5.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment |
29.12.2010 |
EN 301 489-24 V1.4.1 Note 2.1 |
31.7.2012 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-25 V2.3.2 Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 25: Specific conditions for CDMA 1x Spread Spectrum Mobile Stations and ancillary equipment |
24.8.2006 |
EN 301 489-25 V2.2.1 Note 2.1 |
30.4.2007 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-27 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) |
5.10.2005 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 301 489-28 V1.1.1 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 28: Specific conditions for wireless digital video links |
5.10.2005 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 301 489-29 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 29: Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands |
15.12.2009 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 301 489-3 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz |
12.10.2013 |
EN 301 489-3 V1.4.1 Note 2.1 |
31.5.2015 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-31 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) |
24.8.2006 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 301 489-32 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 32: Specific conditions for Ground and Wall Probing Radar applications |
24.8.2006 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 301 489-33 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 33: Specific conditions for Ultra Wide Band (UWB) communications devices |
15.12.2009 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 301 489-34 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones |
12.10.2013 |
EN 301 489-34 V1.3.1 Note 2.1 |
28.2.2015 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-35 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 35: Specific requirements for Low Power Active Medical Implants (LP-AMI) operating in the 2 483,5 MHz to 2 500 MHz bands |
12.9.2014 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 301 489-4 V2.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment |
12.10.2013 |
EN 301 489-4 V1.4.1 Note 2.1 |
31.8.2014 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-4 V2.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment |
10.7.2015 |
EN 301 489-4 V2.1.1 Note 2.1 |
28.2.2017 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-5 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) |
7.12.2002 |
EN 301 489-5 V1.2.1 Note 2.1 |
30.11.2005 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-50 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment |
12.10.2013 |
EN 301 489-8 V1.2.1 EN 301 489-26 V2.3.2 EN 301 489-23 V1.5.1 |
|
Article 3(1)(b) |
|
ETSI |
EN 301 489-6 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment |
15.12.2009 |
EN 301 489-6 V1.2.1 Note 2.1 |
31.5.2010 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-6 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment |
10.7.2015 |
EN 301 489-6 V1.3.1 Note 2.1 |
28.2.2017 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-7 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS) |
24.8.2006 |
EN 301 489-7 V1.2.1 Note 2.1 |
31.1.2009 |
Article 3(1)(b) |
|
ETSI |
EN 301 489-9 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices |
3.6.2008 |
EN 301 489-9 V1.3.1 Note 2.1 |
31.8.2009 |
Article 3(1)(b) |
|
ETSI |
EN 301 502 V11.1.1 Global System for Mobile communications (GSM); Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive |
12.9.2014 |
EN 301 502 V10.2.1 Note 2.1 |
31.12.2015 |
Article 3(2) |
|
ETSI |
EN 301 502 V12.1.1 Global System for Mobile communications (GSM); Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive |
10.7.2015 |
EN 301 502 V11.1.1 Note 2.1 |
30.11.2016 |
Article 3(2) |
|
ETSI |
EN 301 511 V9.0.2 Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC) |
12.11.2003 |
EN 301 511 V7.0.1 Note 2.1 |
30.6.2004 |
Article 3(2) |
|
ETSI |
EN 301 511 V12.1.1 Global System for Mobile communications (GSM); Harmonised EN for mobile stations in the GSM 900 and GSM 1800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC) |
This is the first publication |
EN 301 511 V9.0.2 Note 2.1 |
31.3.2017 |
Article 3(2) |
|
ETSI |
EN 301 526 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CDMA spread spectrum mobile stations operating in the 450 MHz cellular band (CDMA 450) and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR) covering essential requirements of article 3.2 of the R&TTE Directive |
21.12.2006 |
|
|
Article 3(2) |
|
ETSI |
EN 301 559-2 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) operating in the frequency range 2 483,5 MHz to 2 500 MHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
23.10.2012 |
|
|
Article 3(2) |
|
ETSI |
EN 301 598 V1.1.1 White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.9.2014 |
|
|
Article 3(2) |
|
ETSI |
EN 301 681 V1.4.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 1,5 /1,6 GHz bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the R&TTE Directive |
11.4.2012 |
EN 301 681 V1.3.2 Note 2.1 |
31.8.2013 |
Article 3(2) |
|
ETSI |
EN 301 721 V1.2.1 Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz covering essential requirements under Article 3.2 of the R&TTE Directive |
26.7.2001 |
EN 301 721 V1.1.1 Note 2.1 |
31.3.2002 |
Article 3(2) |
|
ETSI |
EN 301 783-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Commercially available amateur radio equipment; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 301 783-2 V1.1.1 Note 2.1 |
30.9.2011 |
Article 3(2) |
|
ETSI |
EN 301 796 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CT1 and CT1+ cordless telephone equipment covering essential requirements under article 3.2 of the R&TTE directive |
14.2.2001 |
|
|
Article 3(2) |
|
ETSI |
EN 301 797 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CT2 cordless telephone equipment covering essential requirements under article 3.2 of the R&TTE directive |
14.2.2001 |
|
|
Article 3(2) |
|
ETSI |
EN 301 839-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 301 839-2 V1.2.1 Note 2.1 |
30.6.2011 |
Article 3(2) |
|
ETSI |
EN 301 841-3 V1.2.1 VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.7.2015 |
EN 301 841-3 V1.1.1 Note 2.1 |
31.1.2016 |
Article 3(2) |
|
ETSI |
EN 301 842-5 V1.1.1 VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 5: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
This is the first publication |
|
|
Article 3(2) |
|
ETSI |
EN 301 843-1 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 1: Common technical requirements |
23.10.2012 |
EN 301 843-1 V1.2.1 Note 2.1 |
31.5.2014 |
Article 3(1)(b) |
|
ETSI |
EN 301 843-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 2: Specific conditions for VHF radiotelephone transmitters and receivers |
5.10.2005 |
EN 301 843-2 V1.1.1 Note 2.1 |
31.3.2006 |
Article 3(1)(b) |
|
ETSI |
EN 301 843-4 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 4: Specific conditions for Narrow-Band Direct-Printing (NBDP) NAVTEX receivers |
5.10.2005 |
EN 301 843-4 V1.1.1 Note 2.1 |
31.3.2006 |
Article 3(1)(b) |
|
ETSI |
EN 301 843-5 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 5: Specific conditions for MF/HF radiotelephone transmitters and receivers |
5.10.2005 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 301 843-6 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services; Part 6: Specific conditions for Earth Stations on board Vessels operating in frequency bands above 3 GHz |
21.12.2006 |
|
|
Article 3(1)(b) |
|
ETSI |
EN 301 893 V1.7.1 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
23.10.2012 |
EN 301 893 V1.6.1 Note 2.1 |
31.12.2014 |
Article 3(2) |
|
ETSI |
EN 301 893 V1.8.1 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.7.2015 |
EN 301 893 V1.7.1 Note 2.1 |
31.12.2016 |
Article 3(2) |
|
ETSI |
EN 301 908-1 V6.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 1: Introduction and common requirements |
12.10.2013 |
EN 301 908-1 V5.2.1 Note 2.1 |
31.1.2015 |
Article 3(2) |
|
ETSI |
EN 301 908-1 V7.1.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 1: Introduction and common requirements |
10.7.2015 |
EN 301 908-1 V6.2.1 Note 2.1 |
31.12.2016 |
Article 3(2) |
|
ETSI |
EN 301 908-10 V4.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive |
15.12.2009 |
EN 301 908-10 V2.1.1 Note 2.1 |
30.4.2011 |
Article 3(2) |
|
ETSI |
EN 301 908-11 V5.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 11: CDMA Direct Spread (UTRA FDD) (Repeaters) |
21.9.2011 |
EN 301 908-11 V4.2.1 Note 2.1 |
30.4.2013 |
Article 3(2) |
|
ETSI |
EN 301 908-12 V4.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 12: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 301 908-12 V3.1.1 Note 2.1 |
30.11.2011 |
Article 3(2) |
|
ETSI |
EN 301 908-13 V6.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) |
12.9.2014 |
EN 302 623 V1.1.1 Note 2.1 |
31.7.2015 |
Article 3(2) |
|
ETSI |
EN 301 908-13 V7.1.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) |
This is the first publication |
EN 301 908-13 V6.2.1 Note 2.1 |
30.9.2017 |
Article 3(2) |
|
ETSI |
EN 301 908-14 V6.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) |
12.9.2014 |
EN 302 774 V1.2.1 Note 2.1 |
31.7.2015 |
Article 3(2) |
|
ETSI |
EN 301 908-14 V7.1.1 IMT cellular networks; Harmonised EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) |
This is the first publication |
EN 301 908-14 V6.2.1 Note 2.1 |
30.4.2017 |
Article 3(2) |
|
ETSI |
EN 301 908-15 V5.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) (Repeaters) |
21.9.2011 |
EN 301 908-15 V4.2.1 Note 2.1 |
30.4.2013 |
Article 3(2) |
|
ETSI |
EN 301 908-16 V4.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 16: Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-17 V4.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 17: Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-18 V7.1.2 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) |
12.9.2014 |
EN 302 774 V1.2.1 Note 2.1 |
31.3.2016 |
Article 3(2) |
|
ETSI |
EN 301 908-19 V6.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 19: OFDMA TDD WMAN (Mobile WiMAX) TDD User Equipment (UE) |
12.10.2013 |
EN 302 544-2 V1.1.1 Note 2.1 |
31.3.2015 |
Article 3(2) |
|
ETSI |
EN 301 908-2 V6.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) |
12.9.2014 |
EN 301 908-2 V5.4.1 Note 2.1 |
31.7.2015 |
Article 3(2) |
|
ETSI |
EN 301 908-2 V7.1.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) |
This is the first publication |
EN 301 908-2 V6.2.1 Note 2.1 |
30.9.2017 |
Article 3(2) |
|
ETSI |
EN 301 908-20 V6.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 20: OFDMA TDD WMAN (Mobile WiMAX) TDD Base Stations (BS) |
12.10.2013 |
EN 301 908-20 V5.2.1 Note 2.1 |
30.9.2014 |
Article 3(2) |
|
ETSI |
EN 301 908-21 V5.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 21: OFDMA TDD WMAN (Mobile WiMAX) FDD User Equipment (UE) |
11.4.2012 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-22 V5.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 22: OFDMA TDD WMAN (Mobile WiMAX) FDD Base Stations (BS) |
11.4.2012 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-3 V6.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) |
12.9.2014 |
EN 301 908-3 V5.2.1 Note 2.1 |
31.7.2015 |
Article 3(2) |
|
ETSI |
EN 301 908-3 V7.1.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) |
This is the first publication |
EN 301 908-3 V6.2.1 Note 2.1 |
30.4.2017 |
Article 3(2) |
|
ETSI |
EN 301 908-4 V6.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier (cdma2000) User Equipment (UE) |
12.10.2013 |
EN 301 908-4 V5.2.1 Note 2.1 |
31.3.2015 |
Article 3(2) |
|
ETSI |
EN 301 908-5 V5.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 5: CDMA Multi-Carrier (cdma2000) Base Stations (BS) |
11.4.2012 |
EN 301 908-5 V4.2.1 Note 2.1 |
30.6.2013 |
Article 3(2) |
|
ETSI |
EN 301 908-6 V5.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 6: CDMA TDD (UTRA TDD) User Equipment (UE) |
21.9.2011 |
EN 301 908-6 V4.2.1 Note 2.1 |
30.4.2013 |
Article 3(2) |
|
ETSI |
EN 301 908-7 V5.2.1 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 7: CDMA TDD (UTRA TDD) Base Stations (BS) |
21.9.2011 |
EN 301 908-7 V4.2.1 Note 2.1 |
30.4.2013 |
Article 3(2) |
|
ETSI |
EN 301 908-8 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation cellular networks; Part 8: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive |
9.3.2002 |
|
|
Article 3(2) |
|
ETSI |
EN 301 908-9 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation cellular networks; Part 9: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R&TTE Directive |
9.3.2002 |
|
|
Article 3(2) |
|
ETSI |
EN 301 929-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
25.9.2007 |
EN 301 929-2 V1.1.1 Note 2.1 |
30.11.2008 |
Article 3(2) |
|
ETSI |
EN 301 997-2 V1.1.1 Transmission and Multiplexing (TM); Multipoint equipment; Radio equipment for use in Multimedia Wireless Systems (MWS) in the frequency band 40,5 GHz to 43,5 GHz; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
30.4.2004 |
|
|
Article 3(2) |
|
ETSI |
EN 302 017-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
24.8.2006 |
|
|
Article 3(2) |
|
ETSI |
EN 302 018-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
24.8.2006 |
EN 302 018-2 V1.1.1 Note 2.1 |
30.11.2007 |
Article 3(2) |
|
ETSI |
EN 302 054-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
12.11.2003 |
|
|
Article 3(2) |
|
ETSI |
EN 302 064-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
21.12.2006 |
|
|
Article 3(2) |
|
ETSI |
EN 302 065-1 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 1: Requirements for Generic UWB applications |
12.9.2014 |
EN 302 065 V1.2.1 Note 2.1 |
31.1.2016 |
Article 3(2) |
|
ETSI |
EN 302 065-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 2: Requirements for UWB location tracking |
12.9.2014 |
|
|
Article 3(2) |
|
ETSI |
EN 302 065-3 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 3: Requirements for UWB devices for road and rail vehicles |
12.9.2014 |
|
|
Article 3(2) |
|
ETSI |
EN 302 066-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall-Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
4.11.2008 |
EN 302 066-2 V1.1.1 Note 2.1 |
30.11.2009 |
Article 3(2) |
|
ETSI |
EN 302 077-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Terrestrial — Digital Audio Broadcasting (T-DAB) service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
5.10.2005 |
|
|
Article 3(2) |
|
ETSI |
EN 302 186 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive |
30.4.2004 |
|
|
Article 3(2) |
|
ETSI |
EN 302 194-2 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
3.6.2008 |
|
|
Article 3(2) |
|
ETSI |
EN 302 195-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 9 kHz to 315 kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
5.10.2005 |
|
|
Article 3(2) |
|
ETSI |
EN 302 208-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
11.4.2012 |
EN 302 208-2 V1.3.1 Note 2.1 |
31.8.2013 |
Article 3(2) |
|
ETSI |
EN 302 208-2 V2.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
17.4.2015 |
EN 302 208-2 V1.4.1 Note 2.1 |
30.11.2016 |
Article 3(2) |
|
ETSI |
EN 302 217-2-2 V2.2.1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-2: Digital systems operating in frequency bands where frequency coordination is applied; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.9.2014 |
EN 302 217-2-2 V2.1.1 Note 2.1 |
31.12.2015 |
Article 3(2) |
|
ETSI |
EN 302 217-3 V2.2.1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 3: Equipment operating in frequency bands where both frequency coordinated or uncoordinated deployment might be applied; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.9.2014 |
EN 302 217-3 V2.1.1 Note 2.1 |
31.12.2015 |
Article 3(2) |
|
ETSI |
EN 302 217-4-2 V1.5.1 Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 4-2: Antennas; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 302 217-4-2 V1.4.1 Note 2.1 |
31.10.2011 |
Article 3(2) |
|
ETSI |
EN 302 245-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Digital Radio Mondiale (DRM) broadcasting service; Part 2: Harmonised EN under article 3.2 of the R&TTE Directive |
5.10.2005 |
|
|
Article 3(2) |
|
ETSI |
EN 302 248 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);Navigation radar for use on non-SOLAS vessels; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.9.2014 |
EN 302 248 V1.1.2 Note 2.1 |
31.8.2015 |
Article 3(2) |
|
ETSI |
EN 302 264-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar equipment operating in the 77 GHz to 81 GHz band; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
15.12.2009 |
|
|
Article 3(2) |
|
ETSI |
EN 302 288-2 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
23.10.2012 |
EN 302 288-2 V1.3.2 Note 2.1 |
31.12.2013 |
Article 3(2) |
|
ETSI |
EN 302 291-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Close Range Inductive Data Communication equipment operating at 13,56 MHz; Part 2: Harmonised EN under article 3.2 of the R&TTE Directive |
24.8.2006 |
|
|
Article 3(2) |
|
ETSI |
EN 302 296-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
21.9.2011 |
EN 302 296 V1.1.1 Note 2.1 |
28.2.2013 |
Article 3(2) |
|
ETSI |
EN 302 297 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the analogue television broadcasting service; Harmonized EN under article 3.2 of the R&TTE Directive |
5.10.2005 |
|
|
Article 3(2) |
|
ETSI |
EN 302 326-2 V1.2.2 Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment |
25.9.2007 |
EN 302 326-2 V1.1.2 Note 2.1 |
31.3.2009 |
Article 3(2) |
|
ETSI |
EN 302 326-3 V1.3.1 Fixed Radio Systems; Multipoint Equipment and Antennas; Part 3: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Multipoint Radio Antennas |
4.11.2008 |
EN 302 326-3 V1.2.2 Note 2.1 |
31.10.2009 |
Article 3(2) |
|
ETSI |
EN 302 340 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering essential requirements under article 3.2 of the R&TTE directive |
24.8.2006 |
|
|
Article 3(2) |
|
ETSI |
EN 302 372-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Equipment for Detection and Movement; Tanks Level Probing Radar (TLPR) operating in the frequency bands 5,8 GHz, 10 GHz, 25 GHz, 61 GHz and 77 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
15.4.2011 |
EN 302 372-2 V1.1.1 Note 2.1 |
30.11.2012 |
Article 3(2) |
|
ETSI |
EN 302 426 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CDMA spread spectrum repeaters operating in the 450 MHz cellular band (CDMA450) and the 410, 450 and 870 MHz PAMR bands (CDMA PAMR) covering essential requirements of article 3.2 of the R&TTE Directive |
21.12.2006 |
|
|
Article 3(2) |
|
ETSI |
EN 302 435-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Building Material Analysis and Classification equipment applications operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 302 435-2 V1.2.1 Note 2.1 |
30.9.2011 |
Article 3(2) |
|
ETSI |
EN 302 448 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized EN for tracking Earth Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive |
4.11.2008 |
|
|
Article 3(2) |
|
ETSI |
EN 302 454-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
25.9.2007 |
|
|
Article 3(2) |
|
ETSI |
EN 302 480 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for the GSM onboard aircraft system covering the essential requirements of Article 3.2 of the R&TTE Directive |
4.11.2008 |
|
|
Article 3(2) |
|
ETSI |
EN 302 498-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra WideBand technology (UWB); Object Discrimination and Characterization Applications for power tool devices operating in the frequency band from 2,2 GHz to 8,5 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
|
|
Article 3(2) |
|
ETSI |
EN 302 500-2 V2.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
29.12.2010 |
EN 302 500-2 V1.2.1 Note 2.1 |
31.7.2012 |
Article 3(2) |
|
ETSI |
EN 302 502 V1.2.1 Broadband Radio Access Networks (BRAN); 5,8 GHz fixed broadband data transmitting systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
4.11.2008 |
EN 302 502 V1.1.1 Note 2.1 |
31.3.2010 |
Article 3(2) |
|
ETSI |
EN 302 510-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low Power Active Medical Membrane Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
3.6.2008 |
|
|
Article 3(2) |
|
ETSI |
EN 302 536-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
25.9.2007 |
|
|
Article 3(2) |
|
ETSI |
EN 302 537-2 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Ultra Low Power Medical Data Service Systems operating in the frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
4.11.2008 |
|
|
Article 3(2) |
|
ETSI |
EN 302 544-1 V1.1.2 Broadband Data Transmission Systems operating in the 2 500 MHz to 2 690 MHz frequency band; Part 1: TDD Base Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 302 544-1 V1.1.1 Note 2.1 |
30.9.2011 |
Article 3(2) |
|
ETSI |
EN 302 544-2 V1.1.1 Broadband Data Transmission Systems operating in the 2 500 MHz to 2 690 MHz frequency band; Part 2: TDD User Equipment Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
15.12.2009 |
|
|
Article 3(2) |
|
ETSI |
EN 302 561 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
EN 302 561 V1.1.1 Note 2.1 |
31.8.2011 |
Article 3(2) |
|
ETSI |
EN 302 561 V1.3.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive |
17.4.2015 |
EN 302 561 V1.2.1 Note 2.1 |
30.6.2016 |
Article 3(2) |
|
ETSI |
EN 302 567 V1.2.1 Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
11.4.2012 |
EN 302 567 V1.1.1 Note 2.1 |
31.10.2013 |
Article 3(2) |
|
ETSI |
EN 302 571 V1.2.1 Intelligent Transport Systems (ITS);Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.9.2014 |
EN 302 571 V1.1.1 Note 2.1 |
31.5.2015 |
Article 3(2) |
|
ETSI |
EN 302 574-1 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 1: Complementary Ground Component (CGC) for wideband systems: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
29.12.2010 |
|
|
Article 3(2) |
|
ETSI |
EN 302 574-2 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 2: User Equipment (UE) for wideband systems: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
29.12.2010 |
|
|
Article 3(2) |
|
ETSI |
EN 302 574-3 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 3: User Equipment (UE) for narrowband systems: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
29.12.2010 |
|
|
Article 3(2) |
|
ETSI |
EN 302 608 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment for Eurobalise railway systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
15.12.2009 |
|
|
Article 3(2) |
|
ETSI |
EN 302 609 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment for Euroloop railway systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
15.12.2009 |
|
|
Article 3(2) |
|
ETSI |
EN 302 617-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical mobile service using amplitude modulation; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
15.4.2011 |
|
|
Article 3(2) |
|
ETSI |
EN 302 623 V1.1.1 Broadband Wireless Access Systems (BWA) in the 3 400 MHz to 3 800 MHz frequency band; Mobile Terminal Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
15.12.2009 |
|
|
Article 3(2) |
|
ETSI |
EN 302 625 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); 5 GHz BroadBand Disaster Relief applications (BBDR); Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
|
|
Article 3(2) |
|
ETSI |
EN 302 645 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Global Navigation Satellite Systems (GNSS) Repeaters; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
|
|
Article 3(2) |
|
ETSI |
EN 302 686 V1.1.1 Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 63 GHz to 64 GHz frequency band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
15.4.2011 |
|
|
Article 3(2) |
|
ETSI |
EN 302 729-2 V1.1.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
21.9.2011 |
|
|
Article 3(2) |
|
ETSI |
EN 302 752 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Active radar target enhancers; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
10.8.2010 |
|
|
Article 3(2) |
|
ETSI |
EN 302 774 V1.2.1 Broadband Wireless Access Systems (BWA) in the 3 400 MHz to 3 800 MHz frequency band; Base Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
23.10.2012 |
EN 302 774 V1.1.1 Note 2.1 |
31.12.2013 |
Article 3(2) |
|
ETSI |
EN 302 858-2 V1.3.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);Road Transport and Traffic Telematics (RTTT); Automotive radar equipment operating in the 24,05 GHz up to 24,25 GHz or 24,50 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.9.2014 |
EN 302 858-2 V1.2.1 Note 2.1 |
31.7.2015 |
Article 3(2) |
|
ETSI |
EN 302 885-2 V1.2.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.9.2014 |
EN 302 885-2 V1.1.1 Note 2.1 |
31.12.2015 |
Article 3(2) |
|
ETSI |
EN 302 885-3 V1.2.2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class D DSC; Part 3: Harmonized EN covering the essential requirements of article 3.3(e) of the R&TTE Directive |
12.9.2014 |
EN 302 885-3 V1.1.1 Note 2.1 |
31.12.2015 |
Article 3(3) |
|
ETSI |
EN 302 961-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and rescue purposes only; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.10.2013 |
EN 300 152-2 V1.1.1 Note 2.1 |
30.4.2015 |
Article 3(2) |
|
ETSI |
EN 302 977 V1.1.2 Satellite Earth Stations and Systems (SES); Harmonized EN for Vehicle-Mounted Earth Stations (VMES) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the R&TTE directive |
10.8.2010 |
|
|
Article 3(2) |
|
ETSI |
EN 302 998-1 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for terrestrial mobile TV to provide multimedia multicast service; Part 1: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive, Common requirements |
21.9.2011 |
|
|
Article 3(2) |
|
ETSI |
EN 302 998-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for terrestrial mobile TV to provide multimedia multicast service; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive, Test Arrangements for transmitters utilizing OFDM technology |
21.9.2011 |
|
|
Article 3(2) |
|
ETSI |
EN 303 035-1 V1.2.1 Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE directive; Part 1: Voice plus Data (V+D) |
10.8.2002 |
EN 303 035-1 V1.1.1 Note 2.1 |
30.9.2003 |
Article 3(2) |
|
ETSI |
EN 303 035-2 V1.2.2 Terrestrial Trunked Radio (TETRA); Harmonized EN for TETRA equipment covering essential requirements under article 3.2 of the R&TTE directive; Part 2: Direct Mode Operation (DMO) |
26.3.2003 |
EN 303 035-2 V1.2.1 Note 2.1 |
31.10.2004 |
Article 3(2) |
|
ETSI |
EN 303 039 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Multichannel transmitter specification for the PMR Service; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.9.2014 |
|
|
Article 3(2) |
|
ETSI |
EN 303 084 V1.1.1 Ground Based Augmentation System (GBAS) VHF ground-air Data Broadcast (VDB); Technical characteristics and methods of measurement for ground-based equipment; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
12.10.2013 |
|
|
Article 3(2) |
|
ETSI |
EN 303 098-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime low power personal locating devices employing AIS; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
17.4.2015 |
|
|
Article 3(2) |
|
ETSI |
EN 303 135 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Coastal Surveillance, Vessel Traffic Services and Harbour Radars (CS/VTS/HR); Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
17.4.2015 |
|
|
Article 3(2) |
|
ETSI |
EN 303 203-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Medical Body Area Network Systems (MBANSs) operating in the 2 483,5 MHz to 2 500 MHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
17.4.2015 |
|
|
Article 3(2) |
|
ETSI |
EN 303 204-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Network Based Short Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
17.4.2015 |
|
|
Article 3(2) |
|
ETSI |
EN 303 213-6-1 V1.2.1 Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW |
12.9.2014 |
EN 303 213-6-1 V1.1.1 Note 2.1 |
31.8.2015 |
Article 3(2) |
|
ETSI |
EN 303 978 V1.1.2 Satellite Earth Stations and Systems (SES); Harmonized EN for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the R&TTE Directive |
12.10.2013 |
|
|
Article 3(2) |
|
ETSI |
EN 303 979 V1.1.1 Satellite Earth Stations and Systems (SES); Harmonised EN for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in non-geostationary orbit in the 27,5 GHz to 29,1 GHz and 29,5 GHz to 30,0 GHz frequency bandscovering the essential requirements of article 3.2 of the R&TTE Directive |
This is the first publication |
|
|
Article 3(2) |
|
ETSI |
EN 305 550-2 V1.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
11.4.2012 |
|
|
Article 3(2) |
|
ETSI |
EN 305 550-2 V1.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
17.4.2015 |
EN 305 550-2 V1.1.1 Note 2.1 |
31.7.2016 |
Article 3(2) |
|
ETSI |
ETS 300 487/A1 ED.1 Satellite Earth Stations and Systems (SES); Receive-Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications; Radio Frequency (RF) specifications |
5.4.2001 |
|
|
Article 3(2) |
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
In addition standards published under Directives 2006/95/EC, 2004/108/EC, 90/385/EEC and 93/42/EEC may be used to demonstrate compliance with articles 3.1.a and 3.1.b of Directive 1999/5/EC. |
|
— |
Products are presumed to comply with the Directive when they meet the requirements within the usage conditions for which they are intended. |
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and CENELEC also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix/Marnixlaan 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË; tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE; tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
|
8.7.2016 |
EN |
Official Journal of the European Union |
C 249/59 |
Commission communication in the framework of the implementation of Directive 2014/53/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2016/C 249/02)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
Standard aims to cover Article(s) of Directive 2014/53/EU |
|
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
|
ETSI |
EN 300 065 V2.1.2 Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (Navtex); Harmonised Standard covering the essential requirements of Articles 3.2 and 3.3(g) of Directive 2014/53/EU |
This is the first publication |
|
|
Article 3(2); Article 3(3)(g) |
|
ETSI |
EN 300 676-2 V2.1.1 Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of Article 3.2 of Directive 2014/53/EU |
This is the first publication |
|
|
Article 3(2) |
|
ETSI |
EN 301 783 V2.1.1 Commercially available amateur radio equipment; Harmonised Standard covering the essential requirements of Article 3.2 of Directive 2014/53/EU |
This is the first publication |
|
|
Article 3(2) |
|
ETSI |
EN 301 839 V2.1.1 Ultra Low Power Active Medical Implants (ULP-AMI) and associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz; Harmonised Standard covering the essential requirements of Article 3.2 of Directive 2014/53/EU |
This is the first publication |
|
|
Article 3(2) |
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and CENELEC also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, 1000, Brussels, Belgium. Tel.+32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix 17, 1000, Brussels, Belgium. Tel.+32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, France. Tel.+33 492944200; fax +33 493654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
|
8.7.2016 |
EN |
Official Journal of the European Union |
C 249/62 |
Commission communication in the framework of the implementation of Directive 2014/35/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2016/C 249/03)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN ISO 11252:2013 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) |
This is the first publication |
|
|
|
CEN |
EN 13637:2015 Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
This is the first publication |
|
|
|
Cenelec |
HD 308 S2:2001 Identification of cores in cables and flexible cords |
This is the first publication |
HD 308 S1:1976 Note 2.1 |
|
|
Cenelec |
HD 361 S3:1999 System for cable designation |
This is the first publication |
|
|
|
|
HD 361 S3:1999/A1:2006 |
This is the first publication |
Note 3 |
1.6.2009 |
|
|
HD 361 S3:1999/AC:1999 |
This is the first publication |
|
|
|
Cenelec |
HD 368 S1:1978 Direct acting recording electrical measuring instruments and their accessories IEC 60258:1968 + A1:1976 |
This is the first publication |
|
|
|
Cenelec |
HD 516 S2:1997 Guide to use of low voltage harmonized cables |
This is the first publication |
|
|
|
|
HD 516 S2:1997/A1:2003 |
This is the first publication |
Note 3 |
1.2.2005 |
|
|
HD 516 S2:1997/A2:2008 |
This is the first publication |
Note 3 |
1.9.2010 |
|
Cenelec |
HD 549 S1:1989 Conference systems - Electrical and audio requirements IEC 60914:1988 |
This is the first publication |
|
|
|
Cenelec |
HD 597 S1:1992 Coupling capacitors and capacitor dividers IEC 60358:1990 |
This is the first publication |
|
|
|
|
HD 597 S1:1992/AC:1992 |
This is the first publication |
|
|
|
Cenelec |
HD 603 S1:1994 Distribution cables of rated voltage 0,6 /1 kV |
This is the first publication |
|
|
|
|
HD 603 S1:1994/A3:2007 |
This is the first publication |
Note 3 |
|
|
|
HD 603 S1:1994/A1:1997 |
This is the first publication |
Note 3 |
|
|
|
HD 603 S1:1994/A2:2003 |
This is the first publication |
Note 3 |
|
|
Cenelec |
HD 604 S1:1994 0,6 /1 kV and 1,9 /3,3 kV power cables with special fire performance for use in power stations |
This is the first publication |
|
|
|
|
HD 604 S1:1994/A3:2005 |
This is the first publication |
Note 3 |
|
|
|
HD 604 S1:1994/A1:1997 |
This is the first publication |
Note 3 |
|
|
|
HD 604 S1:1994/A2:2002 |
This is the first publication |
Note 3 |
|
|
Cenelec |
HD 605 S2:2008 Electric cables - Additional test methods |
This is the first publication |
HD 605 S1:1994 + A1:1996 + A2:2001 + A3:2002 + A4:2004 Note 2.1 |
1.3.2009 |
|
|
HD 605 S2:2008/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
HD 626 S1:1996 Overhead distribution cables of rated voltage Uo/U(Um): 0,6 /1 (1,2 ) kV |
This is the first publication |
|
|
|
|
HD 626 S1:1996/A1:1997 |
This is the first publication |
Note 3 |
|
|
|
HD 626 S1:1996/A2:2002 |
This is the first publication |
Note 3 |
|
|
Cenelec |
HD 627 S1:1996 Multicore and multipair cables for installation above and below ground |
This is the first publication |
|
|
|
|
HD 627 S1:1996/A1:2000 |
This is the first publication |
Note 3 |
|
|
|
HD 627 S1:1996/A2:2005 |
This is the first publication |
Note 3 |
|
|
Cenelec |
HD 639 S1:2002 Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) IEC 61540:1997 (Modified) + A1:1998 (Modified) |
This is the first publication |
|
|
|
|
HD 639 S1:2002/A1:2003 |
This is the first publication |
Note 3 |
|
|
|
HD 639 S1:2002/A2:2010 |
This is the first publication |
Note 3 |
|
|
|
HD 639 S1:2002/AC:2003 |
This is the first publication |
|
|
|
Cenelec |
EN 41003:2008 Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system |
This is the first publication |
EN 41003:1998 Note 2.1 |
|
|
Cenelec |
EN 50065-4-2:2001 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-2: Low voltage decoupling filters - Safety requirements |
This is the first publication |
|
|
|
|
EN 50065-4-2:2001/A1:2003 |
This is the first publication |
Note 3 |
|
|
|
EN 50065-4-2:2001/A2:2005 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 50065-4-7:2005 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-7: Portable low voltage decoupling filters - Safety requirements |
This is the first publication |
|
|
|
|
EN 50065-4-7:2005/AC:2006 |
This is the first publication |
|
|
|
Cenelec |
EN 50085-1:2005 Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements |
This is the first publication |
EN 50085-1:1997 Note 2.1 |
|
|
|
EN 50085-1:2005/A1:2013 |
This is the first publication |
Note 3 |
20.5.2016 |
|
Cenelec |
EN 50085-2-1:2006 Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings |
This is the first publication |
|
|
|
|
EN 50085-2-1:2006/A1:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 50085-2-2:2008 Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor |
This is the first publication |
|
|
|
Cenelec |
EN 50085-2-3:2010 Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets |
This is the first publication |
EN 50085-2-3:1999 Note 2.1 |
|
|
Cenelec |
EN 50085-2-4:2009 Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for service poles and service posts |
This is the first publication |
|
|
|
Cenelec |
EN 50106:2008 Safety of household and similar electrical appliances - Particular rules for routine tests referring to appliances under the scope of EN 60335-1 |
This is the first publication |
EN 50106:1997 + A1:1998 + A2:2001 Note 2.1 |
|
|
Cenelec |
EN 50117-1:2002 Coaxial cables - Part 1: Generic specification |
This is the first publication |
|
|
|
|
EN 50117-1:2002/A1:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 50117-1:2002/A2:2013 |
This is the first publication |
Note 3 |
17.6.2016 |
|
Cenelec |
EN 50117-2-1:2005 Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz |
This is the first publication |
|
|
|
|
EN 50117-2-1:2005/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 50117-2-1:2005/A2:2013 |
This is the first publication |
Note 3 |
1.7.2016 |
|
Cenelec |
EN 50117-2-2:2004 Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1 000 MHz |
This is the first publication |
|
|
|
|
EN 50117-2-2:2004/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 50117-2-2:2004/A2:2013 |
This is the first publication |
Note 3 |
1.7.2016 |
|
Cenelec |
EN 50117-2-3:2004 Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz |
This is the first publication |
|
|
|
|
EN 50117-2-3:2004/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 50117-2-3:2004/A2:2013 |
This is the first publication |
Note 3 |
1.7.2016 |
|
Cenelec |
EN 50117-2-4:2004 Coaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
This is the first publication |
|
|
|
|
EN 50117-2-4:2004/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 50117-2-4:2004/A2:2013 |
This is the first publication |
Note 3 |
1.7.2016 |
|
Cenelec |
EN 50117-2-5:2004 Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz |
This is the first publication |
|
|
|
|
EN 50117-2-5:2004/AC:2012 |
This is the first publication |
|
|
|
|
EN 50117-2-5:2004/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 50117-2-5:2004/A2:2013 |
This is the first publication |
Note 3 |
1.7.2016 |
|
Cenelec |
EN 50117-3-1:2002 Coaxial cables - Part 3-1: Sectional specifications for cables used in Telecom applications - Miniaturized cables used in digital communication systems |
This is the first publication |
|
|
|
Cenelec |
EN 50117-4-1:2008 Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
This is the first publication |
|
|
|
|
EN 50117-4-1:2008/A1:2013 |
This is the first publication |
Note 3 |
17.6.2016 |
|
Cenelec |
EN 50117-4-2:2015 Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks |
This is the first publication |
|
|
|
Cenelec |
EN 50156-1:2004 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
This is the first publication |
|
|
|
Cenelec |
EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
This is the first publication |
EN 50156-1:2004 Note 2.1 |
|
|
Cenelec |
EN 50156-2:2015 Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems |
This is the first publication |
|
|
|
Cenelec |
EN 50178:1997 Electronic equipment for use in power installations |
This is the first publication |
|
|
|
Cenelec |
EN 50214:2006 Flat polyvinyl chloride sheathed flexible cables |
This is the first publication |
HD 359 S2:1990 EN 50214:1997 Note 2.1 |
1.10.2008 |
|
|
EN 50214:2006/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 50250:2002 Conversion adaptors for industrial use |
This is the first publication |
EN 50250:1998 Note 2.1 |
1.7.2005 |
|
|
EN 50250:2002/A1:2015 |
This is the first publication |
Note 3 |
19.1.2018 |
|
|
EN 50250:2002/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 50262:1998 Cable glands for electrical installations |
This is the first publication |
|
|
|
|
EN 50262:1998/A1:2001 |
This is the first publication |
Note 3 |
1.4.2003 |
|
|
EN 50262:1998/A2:2004 |
This is the first publication |
Note 3 |
1.10.2007 |
|
|
EN 50262:1998/AC:1998 |
This is the first publication |
|
|
|
Cenelec |
EN 50267-1:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus |
This is the first publication |
HD 602 S1:1992 Note 2.1 |
1.3.2000 |
|
Cenelec |
EN 50267-2-1:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas |
This is the first publication |
|
|
|
Cenelec |
EN 50267-2-2:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
This is the first publication |
|
|
|
Cenelec |
EN 50267-2-3:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
This is the first publication |
HD 602 S1:1992 Note 2.1 |
1.3.2000 |
|
Cenelec |
EN 50274:2002 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts |
This is the first publication |
|
|
|
|
EN 50274:2002/AC:2009 |
This is the first publication |
|
|
|
Cenelec |
EN 50288-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
This is the first publication |
|
|
|
Cenelec |
EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
This is the first publication |
EN 50288-1:2003 Note 2.1 |
|
|
Cenelec |
EN 50288-2-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-2-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables |
This is the first publication |
EN 50288-2-1:2003 Note 2.1 |
|
|
Cenelec |
EN 50288-2-2:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-2-2:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables |
This is the first publication |
EN 50288-2-2:2003 Note 2.1 |
|
|
Cenelec |
EN 50288-3-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-3-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables |
This is the first publication |
EN 50288-3-1:2003 Note 2.1 |
|
|
Cenelec |
EN 50288-3-2:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-3-2:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables |
This is the first publication |
EN 50288-3-2:2003 Note 2.1 |
|
|
Cenelec |
EN 50288-4-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-4-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables |
This is the first publication |
EN 50288-4-1:2003 Note 2.1 |
|
|
Cenelec |
EN 50288-4-2:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-4-2:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables |
This is the first publication |
EN 50288-4-2:2003 Note 2.1 |
|
|
Cenelec |
EN 50288-5-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-5-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables |
This is the first publication |
EN 50288-5-1:2003 Note 2.1 |
|
|
Cenelec |
EN 50288-5-2:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-5-2:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables |
This is the first publication |
EN 50288-5-2:2003 Note 2.1 |
|
|
Cenelec |
EN 50288-6-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-6-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables |
This is the first publication |
EN 50288-6-1:2003 Note 2.1 |
|
|
Cenelec |
EN 50288-6-2:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-6-2:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables |
This is the first publication |
EN 50288-6-2:2003 Note 2.1 |
|
|
Cenelec |
EN 50288-7:2005 Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-8:2012 Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz |
This is the first publication |
|
|
|
Cenelec |
EN 50288-9-1:2012 Multi-element metallic cables used in analogue and digital communication and control - Part 9-1: Sectional specification for screened cables characterised up to 1 000 MHz - Horizontal and building backbone cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-9-2:2015 Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications |
This is the first publication |
|
|
|
Cenelec |
EN 50288-10-1:2012 Multi-element metallic cables used in analogue and digital communication and control - Part 10-1: Sectional specification for screened cables characterized up to 500 MHz - Horizontal floor and building backbone cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-10-2:2015 Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications |
This is the first publication |
|
|
|
Cenelec |
EN 50288-11-1:2012 Multi-element metallic cables used in analogue and digital communication and control - Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz - Horizontal and building backbone cables |
This is the first publication |
|
|
|
Cenelec |
EN 50288-11-2:2015 Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications |
This is the first publication |
|
|
|
Cenelec |
EN 50289-1-3:2001 Communication cables - Specifications for test methods - Part 1-3: Electrical test methods - Dielectric strength |
This is the first publication |
|
|
|
Cenelec |
EN 50289-1-4:2001 Communication cables - Specifications for test methods - Part 1-4: Electrical test methods - Insulation resistance |
This is the first publication |
|
|
|
Cenelec |
EN 50290-2-1:2005 Communication cables - Part 2-1: Common design rules and construction |
This is the first publication |
|
|
|
Cenelec |
EN 50290-2-20:2001 Communication cables - Part 2-20: Common design rules and construction - General |
This is the first publication |
|
|
|
Cenelec |
EN 50290-2-21:2001 Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds |
This is the first publication |
|
|
|
|
EN 50290-2-21:2001/A1:2007/AC:2016 |
This is the first publication |
|
|
|
|
EN 50290-2-21:2001/A1:2007 |
This is the first publication |
Note 3 |
|
|
|
EN 50290-2-21:2001/AC:2003 |
This is the first publication |
|
|
|
Cenelec |
EN 50290-2-22:2001 Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds |
This is the first publication |
|
|
|
|
EN 50290-2-22:2001/A1:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 50290-2-23:2001 Communication cables - Part 2-23: Common design rules and construction - PE insulation |
This is the first publication |
|
|
|
Cenelec |
EN 50290-2-23:2013 Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
This is the first publication |
EN 50290-2-23:2001 Note 2.1 |
16.9.2016 |
|
Cenelec |
EN 50290-2-24:2002 Communication cables - Part 2-24: Common design rules and construction - PE sheathing |
This is the first publication |
|
|
|
|
EN 50290-2-24:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 50290-2-25:2002 Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds |
This is the first publication |
|
|
|
Cenelec |
EN 50290-2-25:2013 Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds |
This is the first publication |
EN 50290-2-25:2002 Note 2.1 |
16.9.2016 |
|
Cenelec |
EN 50290-2-26:2002 Communication cables - Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds |
This is the first publication |
|
|
|
|
EN 50290-2-26:2002/A1:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 50290-2-27:2002 Communication cables - Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds |
This is the first publication |
|
|
|
|
EN 50290-2-27:2002/A1:2007 |
This is the first publication |
Note 3 |
|
|
|
EN 50290-2-27:2002/A1:2007/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 50290-2-28:2002 Communication cables - Part 2-28: Common design rules and construction - Filling compounds for filled cables |
This is the first publication |
|
|
|
Cenelec |
EN 50290-2-29:2002 Communication cables - Part 2-29: Common design rules and construction - Cross-linked PE insulation compounds |
This is the first publication |
|
|
|
Cenelec |
EN 50290-2-30:2002 Communication cables - Part 2-30: Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
This is the first publication |
|
|
|
Cenelec |
EN 50290-4-1:2001 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
This is the first publication |
|
|
|
Cenelec |
EN 50290-4-1:2014 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
This is the first publication |
EN 50290-4-1:2001 Note 2.1 |
16.9.2016 |
|
Cenelec |
EN 50290-4-2:2014 Communication cables - Part 4-2: General considerations for the use of cables - Guide to use |
This is the first publication |
|
|
|
Cenelec |
EN 50363-0:2011 Insulating, sheathing and covering materials for low-voltage energy cables - Part 0: General introduction |
This is the first publication |
EN 50363-0:2005 Note 2.1 |
14.3.2014 |
|
Cenelec |
EN 50363-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 1: Cross-linked elastomeric insulating compounds |
This is the first publication |
|
|
|
Cenelec |
EN 50363-2-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1: Cross-linked elastomeric sheathing compounds |
This is the first publication |
|
|
|
|
EN 50363-2-1:2005/A1:2011 |
This is the first publication |
Note 3 |
14.3.2014 |
|
Cenelec |
EN 50363-2-2:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 2-2: Cross-linked elastomeric covering compounds |
This is the first publication |
|
|
|
Cenelec |
EN 50363-3:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds |
This is the first publication |
|
|
|
|
EN 50363-3:2005/A1:2011 |
This is the first publication |
Note 3 |
14.3.2014 |
|
Cenelec |
EN 50363-4-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 4-1: PVC sheathing compounds |
This is the first publication |
|
|
|
Cenelec |
EN 50363-4-2:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 4-2: PVC covering compounds |
This is the first publication |
|
|
|
Cenelec |
EN 50363-5:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halogen-free, cross-linked insulating compounds |
This is the first publication |
|
|
|
|
EN 50363-5:2005/A1:2011 |
This is the first publication |
Note 3 |
14.3.2014 |
|
Cenelec |
EN 50363-6:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 6: Halogen-free, cross-linked sheathing compounds |
This is the first publication |
|
|
|
|
EN 50363-6:2005/A1:2011 |
This is the first publication |
Note 3 |
14.3.2014 |
|
Cenelec |
EN 50363-7:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 7: Halogen-free, thermoplastic insulating compounds |
This is the first publication |
|
|
|
Cenelec |
EN 50363-8:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing compounds |
This is the first publication |
|
|
|
|
EN 50363-8:2005/A1:2011 |
This is the first publication |
Note 3 |
14.3.2014 |
|
Cenelec |
EN 50363-9-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1: Miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC) |
This is the first publication |
|
|
|
Cenelec |
EN 50363-10-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC) |
This is the first publication |
|
|
|
Cenelec |
EN 50363-10-2:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane |
This is the first publication |
|
|
|
Cenelec |
EN 50364:2010 Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications |
This is the first publication |
EN 50364:2001 Note 2.1 |
|
|
Cenelec |
EN 50369:2005 Liquid tight sheathing systems for cable management |
This is the first publication |
|
|
|
Cenelec |
EN 50395:2005 Electrical test methods for low voltage energy cables |
This is the first publication |
HD 21.2 S3:1997 + A1:2002 HD 22.2 S3:1997 + A1:2002 Note 2.1 |
1.7.2008 |
|
|
EN 50395:2005/A1:2011 |
This is the first publication |
Note 3 |
14.3.2014 |
|
Cenelec |
EN 50396:2005 Non electrical test methods for low voltage energy cables |
This is the first publication |
HD 21.2 S3:1997 + A1:2002 HD 22.2 S3:1997 + A1:2002 Note 2.1 |
1.7.2008 |
|
|
EN 50396:2005/A1:2011 |
This is the first publication |
Note 3 |
14.3.2014 |
|
Cenelec |
EN 50406-1:2004 End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables |
This is the first publication |
|
|
|
Cenelec |
EN 50406-2:2004 End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables |
This is the first publication |
|
|
|
Cenelec |
EN 50407-1:2004 Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
This is the first publication |
|
|
|
Cenelec |
EN 50407-3:2014 Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP |
This is the first publication |
|
|
|
Cenelec |
EN 50428:2005 Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES) |
This is the first publication |
|
|
|
|
EN 50428:2005/A1:2007 |
This is the first publication |
Note 3 |
|
|
|
EN 50428:2005/A2:2009 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 50441-1:2012 Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1 |
This is the first publication |
EN 50441-1:2006 Note 2.1 |
|
|
Cenelec |
EN 50441-2:2012 Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1 |
This is the first publication |
EN 50441-2:2006 Note 2.1 |
|
|
Cenelec |
EN 50441-3:2006 Cables for indoor residential telecommunication installations - Part 3: Screened cables - Grade 3 |
This is the first publication |
|
|
|
Cenelec |
EN 50441-4:2012 Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3 |
This is the first publication |
|
|
|
Cenelec |
EN 50445:2008 Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) |
This is the first publication |
|
|
|
Cenelec |
EN 50491-3:2009 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements |
This is the first publication |
EN 50090-2-2:1996 + A1:2002 + A2:2007 Note 2.1 |
|
|
Cenelec |
EN 50491-4-1:2012 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
This is the first publication |
|
|
|
Cenelec |
EN 50491-6-1:2014 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6-1: HBES installations - Installation and planning |
This is the first publication |
|
|
|
Cenelec |
EN 50497:2007 Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables |
This is the first publication |
|
|
|
Cenelec |
EN 50520:2009 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations |
This is the first publication |
|
|
|
Cenelec |
EN 50525-1:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements |
This is the first publication |
HD 21.1 S4:2002 HD 22.1 S4:2002 Note 2.1 |
|
|
Cenelec |
EN 50525-2-11:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation |
This is the first publication |
HD 21.5 S3:1994 + A1:1999 + A2:2001 HD 21.12 S1:1994 + A1:2001 Note 2.1 |
|
|
Cenelec |
EN 50525-2-12:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-12: Cables for general applications - Cables with thermoplastic PVC insulation for extensible leads |
This is the first publication |
HD 21.10 S2:2001 Note 2.1 |
|
|
Cenelec |
EN 50525-2-21:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation |
This is the first publication |
HD 22.4 S4:2004 HD 22.10 S2:2007 HD 22.11 S2:2007 HD 22.12 S2:2007 HD 22.16 S2:2007 Note 2.1 |
|
|
|
EN 50525-2-21:2011/AC:2013 |
This is the first publication |
|
|
|
Cenelec |
EN 50525-2-22:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-22: Cables for general applications - High flexibility braided cables with crosslinked elastomeric insulation |
This is the first publication |
HD 22.14 S3:2007 Note 2.1 |
|
|
Cenelec |
EN 50525-2-31:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-31: Cables for general applications - Single core non-sheathed cables with thermoplastic PVC insulation |
This is the first publication |
HD 21.3 S3:1995 + A1:1999 + A2:2008 HD 21.7 S2:1996 + A1:1999 Note 2.1 |
|
|
Cenelec |
EN 50525-2-41:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-41: Cables for general applications - Single core cables with crosslinked silicone rubber insulation |
This is the first publication |
HD 22.3 S4:2004 + A1:2006 Note 2.1 |
|
|
Cenelec |
EN 50525-2-42:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-42: Cables for general applications - Single core non-sheathed cables with crosslinked EVA insulation |
This is the first publication |
HD 22.7 S2:1995 + A1:1999 + A2:2004 Note 2.1 |
|
|
Cenelec |
EN 50525-2-51:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation |
This is the first publication |
HD 21.13 S1:1995 + A1:2001 Note 2.1 |
|
|
Cenelec |
EN 50525-2-71:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation |
This is the first publication |
HD 21.5 S3:1994 + A1:1999 + A2:2001 Note 2.1 |
|
|
Cenelec |
EN 50525-2-72:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-72: Cables for general applications - Flat divisible cables (cords) with thermoplastic PVC insulation |
This is the first publication |
HD 21.11 S1:1995 + A1:2001 Note 2.1 |
|
|
Cenelec |
EN 50525-2-81:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-81: Cables for general applications - Cables with crosslinked elastomeric covering for arc welding |
This is the first publication |
HD 22.6 S2:1995 + A1:1999 + A2:2004 Note 2.1 |
|
|
Cenelec |
EN 50525-2-82:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-82: Cables for general applications - Cables with crosslinked elastomeric insulation for decorative chains |
This is the first publication |
HD 22.8 S2:1994 + A1:1999 + A2:2004 Note 2.1 |
|
|
Cenelec |
EN 50525-2-83:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation |
This is the first publication |
HD 22.15 S2:2007 Note 2.1 |
|
|
Cenelec |
EN 50525-3-11:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke |
This is the first publication |
HD 21.14 S1:2003 Note 2.1 |
|
|
Cenelec |
EN 50525-3-21:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke |
This is the first publication |
HD 22.13 S2:2007 Note 2.1 |
|
|
|
EN 50525-3-21:2011/AC:2013 |
This is the first publication |
|
|
|
Cenelec |
EN 50525-3-31:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-31: Cables with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke |
This is the first publication |
HD 21.15 S1:2006 Note 2.1 |
|
|
Cenelec |
EN 50525-3-41:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-41: Cables with special fire performance - Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke |
This is the first publication |
HD 22.9 S3:2007 Note 2.1 |
|
|
Cenelec |
EN 50539-11:2013 Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 11: Requirements and tests for SPDs in photovoltaic applications |
This is the first publication |
|
|
|
|
EN 50539-11:2013/A1:2014 |
This is the first publication |
Note 3 |
25.7.2017 |
|
Cenelec |
EN 50550:2011 Power frequency overvoltage protective device for household and similar applications (POP) |
This is the first publication |
|
|
|
|
EN 50550:2011/AC:2012 |
This is the first publication |
|
|
|
|
EN 50550:2011/A1:2014 |
This is the first publication |
Note 3 |
28.7.2017 |
|
Cenelec |
EN 50556:2011 Road traffic signal systems |
This is the first publication |
|
|
|
Cenelec |
EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
This is the first publication |
|
|
|
Cenelec |
EN 50565-1:2014 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 1: General guidance |
This is the first publication |
HD 516 S2:1997 + A1:2003 + A2:2008 Note 2.1 |
17.2.2017 |
|
Cenelec |
EN 50565-2:2014 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 2: Specific guidance related to EN 50525 cable types |
This is the first publication |
HD 516 S2:1997 + A1:2003 + A2:2008 Note 2.1 |
17.2.2017 |
|
Cenelec |
EN 50615:2015 Household and similar electrical appliances - Safety - Particular requirements for devices for fire prevention and suppression for electric hobs (cooktops) |
This is the first publication |
|
|
|
Cenelec |
EN 50618:2014 Electric cables for photovoltaic systems |
This is the first publication |
|
|
|
Cenelec |
EN 60034-1:2010 Rotating electrical machines - Part 1: Rating and performance IEC 60034-1:2010 (Modified) |
This is the first publication |
EN 60034-1:2004 Note 2.1 |
|
|
|
EN 60034-1:2010/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 60034-5:2001 Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification IEC 60034-5:2000 |
This is the first publication |
EN 60034-5:1986 Note 2.1 |
|
|
|
EN 60034-5:2001/A1:2007 IEC 60034-5:2000/A1:2006 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60034-6:1993 Rotating electrical machines - Part 6: Methods of cooling (IC Code) IEC 60034-6:1991 |
This is the first publication |
|
|
|
Cenelec |
EN 60034-7:1993 Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) IEC 60034-7:1992 |
This is the first publication |
|
|
|
|
EN 60034-7:1993/A1:2001 IEC 60034-7:1992/A1:2000 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60034-8:2007 Rotating electrical machines - Part 8: Terminal markings and direction of rotation IEC 60034-8:2007 |
This is the first publication |
EN 60034-8:2002 Note 2.1 |
|
|
|
EN 60034-8:2007/A1:2014 IEC 60034-8:2007/A1:2014 |
This is the first publication |
Note 3 |
24.4.2017 |
|
Cenelec |
EN 60034-9:2005 Rotating electrical machines - Part 9: Noise limits IEC 60034-9:2003 (Modified) |
This is the first publication |
EN 60034-9:1997 Note 2.1 |
|
|
|
EN 60034-9:2005/A1:2007 IEC 60034-9:2003/A1:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60034-11:2004 Rotating electrical machines - Part 11: Thermal protection IEC 60034-11:2004 |
This is the first publication |
|
|
|
Cenelec |
EN 60034-12:2002 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors IEC 60034-12:2002 |
This is the first publication |
EN 60034-12:1995 + A11:1999 + A2:1995 Note 2.1 |
|
|
|
EN 60034-12:2002/A1:2007 IEC 60034-12:2002/A1:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60034-14:2004 Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity IEC 60034-14:2003 |
This is the first publication |
EN 60034-14:1996 Note 2.1 |
|
|
|
EN 60034-14:2004/A1:2007 IEC 60034-14:2003/A1:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60051-1:1998 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts IEC 60051-1:1997 |
This is the first publication |
EN 60051-1:1989 + A1:1995 + A2:1995 Note 2.1 |
|
|
Cenelec |
EN 60051-2:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters IEC 60051-2:1984 |
This is the first publication |
|
|
|
Cenelec |
EN 60051-3:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters IEC 60051-3:1984 |
This is the first publication |
|
|
|
|
EN 60051-3:1989/A1:1995 IEC 60051-3:1984/A1:1994 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60051-4:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 4: Special requirements for frequency meters IEC 60051-4:1984 |
This is the first publication |
|
|
|
Cenelec |
EN 60051-5:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes IEC 60051-5:1985 |
This is the first publication |
|
|
|
Cenelec |
EN 60051-6:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters IEC 60051-6:1984 |
This is the first publication |
|
|
|
Cenelec |
EN 60051-7:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for multi-function instruments IEC 60051-7:1984 |
This is the first publication |
|
|
|
Cenelec |
EN 60051-8:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for accessories IEC 60051-8:1984 |
This is the first publication |
|
|
|
Cenelec |
EN 60051-9:1989 Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9: Recommended test methods IEC 60051-9:1988 |
This is the first publication |
|
|
|
|
EN 60051-9:1989/A1:1995 IEC 60051-9:1988/A1:1994 |
This is the first publication |
Note 3 |
|
|
|
EN 60051-9:1989/A2:1995 IEC 60051-9:1988/A2:1995 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60065:2002 Audio, video and similar electronic apparatus - Safety requirements IEC 60065:2001 (Modified) |
This is the first publication |
EN 60065:1998 Note 2.1 |
|
|
|
EN 60065:2002/A1:2006 IEC 60065:2001/A1:2005 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60065:2002/A11:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60065:2002/A12:2011 |
This is the first publication |
Note 3 |
|
|
|
EN 60065:2002/A2:2010 IEC 60065:2001/A2:2010 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60065:2002/AC:2006 |
This is the first publication |
|
|
|
|
EN 60065:2002/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60065:2014 Audio, video and similar electronic apparatus - Safety requirements IEC 60065:2014 (Modified) |
This is the first publication |
EN 60065:2002 + A11:2008 + A12:2011 + A1:2006 + A2:2010 Note 2.1 |
17.11.2017 |
|
|
EN 60065:2014/AC:2016 |
This is the first publication |
|
|
|
Cenelec |
EN 60110-1:1998 Power capacitors for induction heating installations - Part 1: General IEC 60110-1:1998 |
This is the first publication |
HD 207 S1:1977 Note 2.1 |
|
|
Cenelec |
EN 60127-1:2006 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links IEC 60127-1:2006 |
This is the first publication |
EN 60127-1:1991 + A1:1999 + A2:2003 Note 2.1 |
1.7.2009 |
|
|
EN 60127-1:2006/A1:2011 IEC 60127-1:2006/A1:2011 |
This is the first publication |
Note 3 |
25.5.2014 |
|
|
EN 60127-1:2006/A2:2015 IEC 60127-1:2006/A2:2015 |
This is the first publication |
Note 3 |
25.3.2018 |
|
Cenelec |
EN 60127-2:2003 Miniature fuses - Part 2: Cartridge fuse-links IEC 60127-2:2003 |
This is the first publication |
EN 60127-2:1991 + A1:1995 + A2:2000 Note 2.1 |
1.3.2006 |
|
|
EN 60127-2:2003/A1:2003 IEC 60127-2:2003/A1:2003 |
This is the first publication |
Note 3 |
1.10.2006 |
|
|
EN 60127-2:2003/A2:2010 IEC 60127-2:2003/A2:2010 |
This is the first publication |
Note 3 |
1.7.2013 |
|
Cenelec |
EN 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links IEC 60127-2:2014 |
This is the first publication |
EN 60127-2:2003 + A1:2003 + A2:2010 Note 2.1 |
24.10.2017 |
|
Cenelec |
EN 60127-3:1996 Miniature fuses - Part 3: Sub-miniature fuse-links IEC 60127-3:1988 + A1:1991 |
This is the first publication |
EN 60127-3:1991 Note 2.1 |
1.12.1996 |
|
|
EN 60127-3:1996/A2:2003 IEC 60127-3:1988/A2:2002 |
This is the first publication |
Note 3 |
1.2.2006 |
|
|
EN 60127-3:1996/AC:1996 |
This is the first publication |
|
|
|
Cenelec |
EN 60127-4:2005 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types IEC 60127-4:2005 |
This is the first publication |
EN 60127-4:1996 + A1:2002 + A2:2003 Note 2.1 |
1.3.2008 |
|
|
EN 60127-4:2005/A1:2009 IEC 60127-4:2005/A1:2008 |
This is the first publication |
Note 3 |
1.2.2012 |
|
|
EN 60127-4:2005/A2:2013 IEC 60127-4:2005/A2:2012 |
This is the first publication |
Note 3 |
11.1.2016 |
|
Cenelec |
EN 60127-6:1994 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links IEC 60127-6:1994 |
This is the first publication |
|
|
|
|
EN 60127-6:1994/A1:1996 IEC 60127-6:1994/A1:1996 |
This is the first publication |
Note 3 |
1.12.1996 |
|
|
EN 60127-6:1994/A2:2003 IEC 60127-6:1994/A2:2002 |
This is the first publication |
Note 3 |
1.2.2006 |
|
Cenelec |
EN 60127-6:2014 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links IEC 60127-6:2014 |
This is the first publication |
EN 60127-6:1994 + A1:1996 + A2:2003 Note 2.1 |
8.10.2017 |
|
Cenelec |
EN 60127-7:2013 Miniature fuses - Part 7: Miniature fuse-links for special applications IEC 60127-7:2013 |
This is the first publication |
|
|
|
Cenelec |
EN 60127-7:2016 Miniature fuses - Part 7: Miniature fuse-links for special applications IEC 60127-7:2015 |
This is the first publication |
EN 60127-7:2013 Note 2.1 |
|
|
Cenelec |
EN 60143-2:1994 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks IEC 60143-2:1994 |
This is the first publication |
|
|
|
Cenelec |
EN 60143-2:2013 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks IEC 60143-2:2012 |
This is the first publication |
EN 60143-2:1994 Note 2.1 |
15.1.2016 |
|
Cenelec |
EN 60155:1995 Glow-starters for fluorescent lamps IEC 60155:1993 |
This is the first publication |
|
|
|
|
EN 60155:1995/A1:1995 IEC 60155:1993/A1:1995 |
This is the first publication |
Note 3 |
|
|
|
EN 60155:1995/A2:2007 IEC 60155:1993/A2:2006 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60204-1:2006 Safety of machinery - Electrical equipment of machines - Part 1: General requirements IEC 60204-1:2005 (Modified) |
This is the first publication |
EN 60204-1:1997 Note 2.1 |
|
|
|
EN 60204-1:2006/A1:2009 IEC 60204-1:2005/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60204-1:2006/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines IEC 60204-32:2008 |
This is the first publication |
EN 60204-32:1998 Note 2.1 |
|
|
Cenelec |
EN 60215:1989 Safety requirements for radio transmitting equipment IEC 60215:1987 |
This is the first publication |
|
|
|
|
EN 60215:1989/A1:1992 IEC 60215:1987/A1:1990 |
This is the first publication |
Note 3 |
|
|
|
EN 60215:1989/A2:1994 IEC 60215:1987/A2:1993 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60228:2005 Conductors of insulated cables IEC 60228:2004 |
This is the first publication |
|
|
|
|
EN 60228:2005/AC:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60238:2004 Edison screw lampholders IEC 60238:2004 |
This is the first publication |
EN 60238:1998 + A1:1999 + A2:2002 Note 2.1 |
|
|
|
EN 60238:2004/A1:2008 IEC 60238:2004/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60238:2004/A2:2011 IEC 60238:2004/A2:2011 |
This is the first publication |
Note 3 |
|
|
|
EN 60238:2004/AC:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60252-1:2011 AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation IEC 60252-1:2010 |
This is the first publication |
EN 60252-1:2001 Note 2.1 |
|
|
|
EN 60252-1:2011/A1:2013 IEC 60252-1:2010/A1:2013 |
This is the first publication |
Note 3 |
3.10.2016 |
|
Cenelec |
EN 60252-2:2011 AC motor capacitors - Part 2: Motor start capacitors IEC 60252-2:2010 |
This is the first publication |
EN 60252-2:2003 Note 2.1 |
|
|
|
EN 60252-2:2011/A1:2013 IEC 60252-2:2010/A1:2013 |
This is the first publication |
Note 3 |
3.10.2016 |
|
Cenelec |
EN 60255-5:2001 Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests IEC 60255-5:2000 |
This is the first publication |
|
|
|
Cenelec |
EN 60255-27:2005 Measuring relays and protection equipment - Part 27: Product safety requirements IEC 60255-27:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60255-27:2014 Measuring relays and protection equipment - Part 27: Product safety requirements IEC 60255-27:2013 |
This is the first publication |
EN 60255-5:2001 EN 60255-27:2005 Note 2.1 |
19.11.2016 |
|
Cenelec |
EN 60269-1:2007 Low-voltage fuses - Part 1: General requirements IEC 60269-1:2006 |
This is the first publication |
EN 60269-1:1998 + A1:2005 EN 60269-2:1995 + A1:1998 + A2:2002 EN 60269-3:1995 + A1:2003 Note 2.1 |
|
|
|
EN 60269-1:2007/A1:2009 IEC 60269-1:2006/A1:2009 |
This is the first publication |
Note 3 |
|
|
|
EN 60269-1:2007/A2:2014 IEC 60269-1:2006/A2:2014 |
This is the first publication |
Note 3 |
4.8.2017 |
|
Cenelec |
HD 60269-2:2010 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J IEC 60269-2:2010 (Modified) |
This is the first publication |
HD 60269-2:2007 Note 2.1 |
|
|
Cenelec |
HD 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K IEC 60269-2:2013 (Modified) |
This is the first publication |
HD 60269-2:2010 Note 2.1 |
15.8.2016 |
|
Cenelec |
HD 60269-3:2010 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F IEC 60269-3:2010 (Modified) |
This is the first publication |
HD 60269-3:2007 Note 2.1 |
|
|
|
HD 60269-3:2010/A1:2013 IEC 60269-3:2010/A1:2013 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60269-4:2009 Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices IEC 60269-4:2009 |
This is the first publication |
EN 60269-4:2007 Note 2.1 |
|
|
|
EN 60269-4:2009/A1:2012 IEC 60269-4:2009/A1:2012 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60269-6:2011 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems IEC 60 IEC 60269-6:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 60309-1:1999 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements IEC 60309-1:1999 |
This is the first publication |
EN 60309-1:1997 Note 2.1 |
1.4.2002 |
|
|
EN 60309-1:1999/A1:2007 IEC 60309-1:1999/A1:2005 (Modified) |
This is the first publication |
Note 3 |
1.11.2009 |
|
|
EN 60309-1:1999/A2:2012 IEC 60309-1:1999/A2:2012 |
This is the first publication |
Note 3 |
13.7.2015 |
|
|
EN 60309-1:1999/A1:2007/AC:2014 |
This is the first publication |
|
|
|
Cenelec |
EN 60309-2:1999 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories IEC 60309-2:1999 |
This is the first publication |
EN 60309-2:1998 Note 2.1 |
1.5.2002 |
|
|
EN 60309-2:1999/A1:2007 IEC 60309-2:1999/A1:2005 (Modified) |
This is the first publication |
Note 3 |
1.11.2009 |
|
|
EN 60309-2:1999/A2:2012 IEC 60309-2:1999/A2:2012 |
This is the first publication |
Note 3 |
19.4.2015 |
|
Cenelec |
EN 60309-4:2007 Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock IEC 60309-4:2006 (Modified) |
This is the first publication |
|
|
|
|
EN 60309-4:2007/A1:2012 IEC 60309-4:2006/A1:2012 |
This is the first publication |
Note 3 |
19.4.2015 |
|
Cenelec |
EN 60320-1:2001 Appliance couplers for household and similar general purposes - Part 1: General requirements IEC 60320-1:2001 |
This is the first publication |
EN 60320-1:1996 + A1:1996 + A2:1998 Note 2.1 |
|
|
|
EN 60320-1:2001/A1:2007 IEC 60320-1:2001/A1:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60320-2-1:2000 Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers IEC 60320-2-1:2000 |
This is the first publication |
EN 60320-2-1:1987 Note 2.1 |
|
|
Cenelec |
EN 60320-2-2:1998 Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment IEC 60320-2-2:1998 |
This is the first publication |
EN 60320-2-2:1991 Note 2.1 |
|
|
Cenelec |
EN 60320-2-4:2006 Appliance couplers for household and similar general purposes - Part 2-4: Appliance couplers dependent on appliance weight for engagement IEC 60320-2-4:2005 |
This is the first publication |
|
|
|
|
EN 60320-2-4:2006/A1:2009 IEC 60320-2-4:2005/A1:2009 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60332-1-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus IEC 60332-1-1:2004 |
This is the first publication |
EN 50265-1:1998 Note 2.1 |
1.9.2007 |
|
|
EN 60332-1-1:2004/A1:2015 IEC 60332-1-1:2004/A1:2015 |
This is the first publication |
Note 3 |
1.9.2018 |
|
Cenelec |
EN 60332-1-2:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame IEC 60332-1-2:2004 |
This is the first publication |
EN 50265-2-1:1998 Note 2.1 |
1.9.2007 |
|
|
EN 60332-1-2:2004/A1:2015 IEC 60332-1-2:2004/A1:2015 |
This is the first publication |
Note 3 |
1.9.2018 |
|
Cenelec |
EN 60332-1-3:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles IEC 60332-1-3:2004 |
This is the first publication |
|
|
|
|
EN 60332-1-3:2004/A1:2015 IEC 60332-1-3:2004/A1:2015 |
This is the first publication |
Note 3 |
1.9.2018 |
|
Cenelec |
EN 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus IEC 60332-2-1:2004 |
This is the first publication |
EN 50265-1:1998 Note 2.1 |
1.9.2007 |
|
Cenelec |
EN 60332-2-2:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame IEC 60332-2-2:2004 |
This is the first publication |
EN 50265-2-2:1998 Note 2.1 |
1.9.2007 |
|
Cenelec |
EN 60332-3-10:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus IEC 60332-3-10:2000 + A1:2008 |
This is the first publication |
EN 50266-1:2001 Note 2.1 |
1.8.2012 |
|
Cenelec |
EN 60332-3-21:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R IEC 60332-3-21:2000 (Modified) |
This is the first publication |
EN 50266-2-1:2001 Note 2.1 |
1.8.2012 |
|
Cenelec |
EN 60332-3-22:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A IEC 60332-3-22:2000 + A1:2008 |
This is the first publication |
EN 50266-2-2:2001 Note 2.1 |
1.8.2012 |
|
Cenelec |
EN 60332-3-23:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B IEC 60332-3-23:2000 + A1:2008 |
This is the first publication |
EN 50266-2-3:2001 Note 2.1 |
1.8.2012 |
|
Cenelec |
EN 60332-3-24:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C IEC 60332-3-24:2000 + A1:2008 |
This is the first publication |
EN 50266-2-4:2001 Note 2.1 |
1.8.2012 |
|
Cenelec |
EN 60332-3-25:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D IEC 60332-3-25:2000 + A1:2008 |
This is the first publication |
EN 50266-2-5:2001 Note 2.1 |
1.8.2012 |
|
Cenelec |
EN 60335-1:1994 Safety of household and similar electrical appliances - Part 1: General requirements IEC 60335-1:1991 (Modified) |
This is the first publication |
EN 60335-1:1988 + A2:1988 + A51:1991 + A52:1992 + A53:1992 + A54:1992 + A55:1993 + A56:1995 + A5:1989 + A6:1989 Note 2.1 |
|
|
|
EN 60335-1:1994/A11:1995 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:1994/A1:1996 IEC 60335-1:1991/A1:1994 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:1994/A12:1996 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:1994/A15:2000 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:1994/A13:1998 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:1994/A14:1998 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:1994/A16:2001 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:1994/A2:2000 IEC 60335-1:1991/A2:1999 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:1994/A2:2000/AC:2004 |
This is the first publication |
|
|
|
|
EN 60335-1:1994/AC:1994 |
This is the first publication |
|
|
|
|
EN 60335-1:1994/AC:1995 |
This is the first publication |
|
|
|
|
EN 60335-1:1994/AC:2009 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-1:2002 Household and similar electrical appliances - Safety - Part 1: General requirements IEC 60335-1:2001 (Modified) |
This is the first publication |
EN 60335-1:1994 + A11:1995 + A12:1996 + A13:1998 + A14:1998 + A15:2000 + A16:2001 + A1:1996 + A2:2000 Note 2.1 |
|
|
|
EN 60335-1:2002/A11:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:2002/A12:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:2002/A1:2004 IEC 60335-1:2001/A1:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:2002/A13:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:2002/A14:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:2002/A15:2011 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:2002/A2:2006 IEC 60335-1:2001/A2:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-1:2002/A12:2006/AC:2007 |
This is the first publication |
|
|
|
|
EN 60335-1:2002/A1:2004/AC:2007 |
This is the first publication |
|
|
|
|
EN 60335-1:2002/AC:2009 |
This is the first publication |
|
|
|
|
EN 60335-1:2002/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements IEC 60335-1:2010 (Modified) |
This is the first publication |
EN 60335-1:2002 + A11:2004 + A12:2006 + A13:2008 + A14:2010 + A15:2011 + A1:2004 + A2:2006 Note 2.1 |
|
|
|
EN 60335-1:2012/AC:2014 |
This is the first publication |
|
|
|
|
EN 60335-1:2012/A11:2014 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-2:2010 Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances IEC 60335-2-2:2009 |
This is the first publication |
EN 60335-2-2:2003 + A11:2010 + A1:2004 + A2:2006 Note 2.1 |
|
|
|
EN 60335-2-2:2010/A11:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-2:2010/A1:2013 IEC 60335-2-2:2009/A1:2012 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-3:2002 Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons IEC 6033 IEC 60335-2-3:2002 |
This is the first publication |
EN 60335-2-3:1995 + A1:1999 + A2:2000 Note 2.1 |
|
|
|
EN 60335-2-3:2002/A1:2005 IEC 60335-2-3:2002/A1:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-3:2002/A11:2010/AC:2012 |
This is the first publication |
|
|
|
|
EN 60335-2-3:2002/A11:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-3:2002/A2:2008 IEC 60335-2-3:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-3:2016 Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons IEC 60335-2-3:2012 (Modified) |
This is the first publication |
EN 60335-2-3:2002 + A11:2010 + A1:2005 + A2:2008 Note 2.1 |
5.10.2018 |
|
Cenelec |
EN 60335-2-4:2010 Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors IEC 60335-2-4:2008 (Modified) |
This is the first publication |
EN 60335-2-4:2002 + A1:2004 + A2:2006 Note 2.1 |
|
|
|
EN 60335-2-4:2010/A1:2015 IEC 60335-2-4:2008/A1:2012 (Modified) |
This is the first publication |
Note 3 |
12.8.2016 |
|
Cenelec |
EN 60335-2-5:2003 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers IEC 6033 IEC 60335-2-5:2002 (Modified) |
This is the first publication |
EN 60335-2-5:1995 + A11:1997 + A1:1999 + A2:2000 Note 2.1 |
|
|
|
EN 60335-2-5:2003/A1:2005 IEC 60335-2-5:2002/A1:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-5:2003/A11:2009 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-5:2003/A12:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-5:2003/A2:2008 IEC 60335-2-5:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-5:2015 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers IEC 60335-2-5:2012 (Modified) |
This is the first publication |
EN 60335-2-5:2003 + A11:2009 + A12:2012 + A1:2005 + A2:2008 Note 2.1 |
9.8.2016 |
|
Cenelec |
EN 60335-2-6:2003 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances IEC 60335-2-6:2002 (Modified) |
This is the first publication |
EN 60335-2-6:1999 + A1:2001 Note 2.1 |
|
|
|
EN 60335-2-6:2003/A1:2005 IEC 60335-2-6:2002/A1:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-6:2003/A11:2010/AC:2012 |
This is the first publication |
|
|
|
|
EN 60335-2-6:2003/A11:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-6:2003/A12:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-6:2003/A13:2013 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-6:2003/A2:2008 IEC 60335-2-6:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-6:2003/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-6:2015 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances IEC 60335-2-6:2014 (Modified) |
This is the first publication |
EN 60335-2-6:2003 + A11:2010 + A12:2012 + A13:2013 + A1:2005 + A2:2008 Note 2.1 |
9.2.2018 |
|
Cenelec |
EN 60335-2-7:2010 Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines IEC 60335-2-7:2008 (Modified) |
This is the first publication |
EN 60335-2-7:2003 + A11:2010 + A1:2004 + A2:2006 Note 2.1 |
|
|
|
EN 60335-2-7:2010/A11:2013 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-7:2010/A1:2013 IEC 60335-2-7:2008/A1:2011 (Modified) |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-8:2003 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances IEC 60335-2-8:2002 (Modified) |
This is the first publication |
EN 60335-2-8:1995 + A1:2001 Note 2.1 |
|
|
|
EN 60335-2-8:2003/A1:2005 IEC 60335-2-8:2002/A1:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-8:2003/A2:2008 IEC 60335-2-8:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-8:2015 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances IEC 60335-2-8:2012 (Modified) |
This is the first publication |
EN 60335-2-8:2003 + A1:2005 + A2:2008 Note 2.1 |
20.7.2018 |
|
|
EN 60335-2-8:2015/A1:2016 IEC 60335-2-8:2012/A1:2015 |
This is the first publication |
Note 3 |
28.12.2018 |
|
Cenelec |
EN 60335-2-10:2003 Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines IEC 60335-2-10:2002 |
This is the first publication |
EN 60335-2-10:1995 Note 2.1 |
|
|
|
EN 60335-2-10:2003/A1:2008 IEC 60335-2-10:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-11:2010 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers IEC 60335-2-11:2008 (Modified) |
This is the first publication |
EN 60335-2-11:2003 + A11:2008 + A1:2004 + A2:2006 Note 2.1 |
|
|
|
EN 60335-2-11:2010/A11:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-11:2010/A1:2015 IEC 60335-2-11:2008/A1:2012 (Modified) |
This is the first publication |
Note 3 |
24.2.2017 |
|
Cenelec |
EN 60335-2-12:2003 Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances IEC 60335-2-12:2002 |
This is the first publication |
EN 60335-2-12:1995 Note 2.1 |
|
|
|
EN 60335-2-12:2003/A1:2008 IEC 60335-2-12:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-13:2010 Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances IEC 60335-2-13:2009 |
This is the first publication |
EN 60335-2-13:2003 + A1:2004 + A2:2008 Note 2.1 |
|
|
|
EN 60335-2-13:2010/A11:2012 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-15:2002 Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids IEC 60335-2-15:2002 |
This is the first publication |
EN 60335-2-15:1996 + A1:1999 + A2:2000 Note 2.1 |
|
|
|
EN 60335-2-15:2002/A1:2005 IEC 60335-2-15:2002/A1:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-15:2002/A11:2012/AC:2013 |
This is the first publication |
|
|
|
|
EN 60335-2-15:2002/A11:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-15:2002/A2:2008 IEC 60335-2-15:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-15:2002/AC:2005 |
This is the first publication |
|
|
|
|
EN 60335-2-15:2002/AC:2006 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-16:2003 Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers IEC 60335-2-16:2002 (Modified) |
This is the first publication |
EN 60335-2-16:1996 Note 2.1 |
|
|
|
EN 60335-2-16:2003/A1:2008 IEC 60335-2-16:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-16:2003/A2:2012 IEC 60335-2-16:2002/A2:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-17:2013 Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances IEC 60335-2-17:2012 |
This is the first publication |
EN 60335-2-17:2002 + A1:2006 + A2:2009 Note 2.1 |
|
|
Cenelec |
EN 60335-2-21:2003 Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters IEC 60335-2-21:2002 (Modified) |
This is the first publication |
EN 60335-2-21:1999 + A11:2002 + A12:2002 + A1:2000 Note 2.1 |
|
|
|
EN 60335-2-21:2003/A1:2005 IEC 60335-2-21:2002/A1:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-21:2003/A2:2008 IEC 60335-2-21:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-21:2003/AC:2007 |
This is the first publication |
|
|
|
|
EN 60335-2-21:2003/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-23:2003 Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care IEC 60335-2-23:2003 |
This is the first publication |
EN 60335-2-23:1996 + A1:2001 Note 2.1 |
|
|
|
EN 60335-2-23:2003/A11:2010/AC:2012 |
This is the first publication |
|
|
|
|
EN 60335-2-23:2003/A11:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-23:2003/A1:2008 IEC 60335-2-23:2003/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-23:2003/A2:2015 IEC 60335-2-23:2003/A2:2012 (Modified) |
This is the first publication |
Note 3 |
29.9.2017 |
|
Cenelec |
EN 60335-2-25:2012 Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens IEC 60335-2-25:2010 (Modified) |
This is the first publication |
EN 60335-2-25:2002 + A11:2010 + A1:2005 + A2:2006 Note 2.1 |
|
|
|
EN 60335-2-25:2012/A1:2015 IEC 60335-2-25:2010/A1:2014 |
This is the first publication |
Note 3 |
16.9.2017 |
|
|
EN 60335-2-25:2012/A2:2016 IEC 60335-2-25:2010/A2:2015 |
This is the first publication |
Note 3 |
28.12.2018 |
|
Cenelec |
EN 60335-2-26:2003 Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks IEC 60335-2-26:2002 |
This is the first publication |
EN 60335-2-26:1996 Note 2.1 |
|
|
|
EN 60335-2-26:2003/A1:2008 IEC 60335-2-26:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-27:2013 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation IEC 60335-2-27:2009 (Modified) |
This is the first publication |
EN 60335-2-27:2010 Note 2.1 |
|
|
Cenelec |
EN 60335-2-28:2003 Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines IEC 60335-2-28:2002 (Modified) |
This is the first publication |
EN 60335-2-28:1996 Note 2.1 |
|
|
|
EN 60335-2-28:2003/A1:2008 IEC 60335-2-28:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-29:2004 Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers IEC 60335-2-29:2002 + A1:2004 |
This is the first publication |
EN 60335-2-29:1996 + A11:1997 Note 2.1 |
|
|
|
EN 60335-2-29:2004/A2:2010 IEC 60335-2-29:2002/A2:2009 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-30:2009 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters IEC 60335-2-30:2009 |
This is the first publication |
EN 60335-2-30:2003 + A1:2004 + A2:2007 Note 2.1 |
|
|
|
EN 60335-2-30:2009/A11:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-30:2009/AC:2010 |
This is the first publication |
|
|
|
|
EN 60335-2-30:2009/AC:2014 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-31:2003 Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors IEC 60335-2-31:2002 |
This is the first publication |
EN 60335-2-31:1997 + A1:1999 Note 2.1 |
|
|
|
EN 60335-2-31:2003/A1:2006 IEC 60335-2-31:2002/A1:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-31:2003/A2:2009 IEC 60335-2-31:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-31:2003/AC:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-31:2014 Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors IEC 60335-2-31:2012 (Modified) |
This is the first publication |
EN 60335-2-31:2003 + A1:2006 + A2:2009 Note 2.1 |
28.4.2017 |
|
Cenelec |
EN 60335-2-32:2003 Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances IEC 60335-2-32:2002 |
This is the first publication |
EN 60335-2-32:1995 + A1:2000 Note 2.1 |
|
|
|
EN 60335-2-32:2003/A1:2008 IEC 60335-2-32:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-32:2003/A2:2015 IEC 60335-2-32:2002/A2:2013 (Modified) |
This is the first publication |
Note 3 |
11.11.2017 |
|
Cenelec |
EN 60335-2-34:2013 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors IEC 60335-2-34:2012 |
This is the first publication |
EN 60335-2-34:2002 + A11:2004 + A1:2005 + A2:2009 Note 2.1 |
27.6.2018 |
|
Cenelec |
EN 60335-2-35:2002 Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters IEC 60335-2-35:2002 |
This is the first publication |
EN 60335-2-35:1998 + A1:2000 Note 2.1 |
|
|
|
EN 60335-2-35:2002/A1:2007 IEC 60335-2-35:2002/A1:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-35:2002/A2:2011 IEC 60335-2-35:2002/A2:2009 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-35:2002/AC:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-35:2016 Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters IEC 60335-2-35:2012 (Modified) |
This is the first publication |
EN 60335-2-35:2002 + A11:201 + A1:2007 + A2:2011 Note 2.1 |
12.10.2018 |
|
Cenelec |
EN 60335-2-36:2002 Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements IEC 60335-2-36:2002 |
This is the first publication |
EN 60335-2-36:2000 Note 2.1 |
|
|
|
EN 60335-2-36:2002/A1:2004 IEC 60335-2-36:2002/A1:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-36:2002/A11:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-36:2002/A2:2008 IEC 60335-2-36:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-36:2002/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-37:2002 Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers IEC 60335-2-37:2002 |
This is the first publication |
EN 60335-2-37:2000 Note 2.1 |
|
|
|
EN 60335-2-37:2002/A1:2008 IEC 60335-2-37:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-37:2002/A11:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-37:2002/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-38:2003 Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills IEC 60335-2-38:2002 |
This is the first publication |
EN 60335-2-38:2000 Note 2.1 |
|
|
|
EN 60335-2-38:2003/A1:2008 IEC 60335-2-38:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-38:2003/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-39:2003 Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans IEC 60335-2-39:2002 |
This is the first publication |
EN 60335-2-39:2000 Note 2.1 |
|
|
|
EN 60335-2-39:2003/A1:2004 IEC 60335-2-39:2002/A1:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-39:2003/A2:2008 IEC 60335-2-39:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-39:2003/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-40:2003 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers IEC 60335-2-40:2002 (Modified) |
This is the first publication |
EN 60335-2-40:1997 + A11:2004 + A1:2000 Note 2.1 |
|
|
|
EN 60335-2-40:2003/A11:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-40:2003/A12:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-40:2003/A1:2006 IEC 60335-2-40:2002/A1:2005 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-40:2003/A13:2012/AC:2013 |
This is the first publication |
|
|
|
|
EN 60335-2-40:2003/A13:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-40:2003/A2:2009 IEC 60335-2-40:2002/A2:2005 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-40:2003/AC:2006 |
This is the first publication |
|
|
|
|
EN 60335-2-40:2003/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-41:2003 Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps IEC 60335-2-41:2002 |
This is the first publication |
EN 60335-2-41:1996 + A1:2001 Note 2.1 |
|
|
|
EN 60335-2-41:2003/A1:2004 IEC 60335-2-41:2002/A1:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-41:2003/A2:2010 IEC 60335-2-41:2002/A2:2009 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-42:2003 Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens IEC 60335-2-42:2002 |
This is the first publication |
EN 60335-2-42:2000 Note 2.1 |
|
|
|
EN 60335-2-42:2003/A1:2008 IEC 60335-2-42:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-42:2003/A11:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-42:2003/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-43:2003 Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails IEC 60335-2-43:2002 |
This is the first publication |
EN 60335-2-43:1997 Note 2.1 |
|
|
|
EN 60335-2-43:2003/A1:2006 IEC 60335-2-43:2002/A1:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-43:2003/A2:2008 IEC 60335-2-43:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-44:2002 Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers IEC 60335-2-44:2002 |
This is the first publication |
EN 60335-2-44:1997 Note 2.1 |
|
|
|
EN 60335-2-44:2002/A1:2008 IEC 60335-2-44:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-44:2002/A2:2012 IEC 60335-2-44:2002/A2:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-45:2002 Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances IEC 60335-2-45:2002 |
This is the first publication |
EN 60335-2-45:1996 Note 2.1 |
|
|
|
EN 60335-2-45:2002/A1:2008 IEC 60335-2-45:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-45:2002/A2:2012 IEC 60335-2-45:2002/A2:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-47:2003 Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans IEC 60335-2-47:2002 |
This is the first publication |
EN 60335-2-47:2000 Note 2.1 |
|
|
|
EN 60335-2-47:2003/A1:2008 IEC 60335-2-47:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-47:2003/A11:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-47:2003/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-48:2003 Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters IEC 60335-2-48:2002 |
This is the first publication |
EN 60335-2-48:2000 Note 2.1 |
|
|
|
EN 60335-2-48:2003/A1:2008 IEC 60335-2-48:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-48:2003/A11:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-48:2003/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-49:2003 Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm IEC 60335-2-49:2002 |
This is the first publication |
EN 60335-2-49:2000 Note 2.1 |
|
|
|
EN 60335-2-49:2003/A1:2008 IEC 60335-2-49:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-49:2003/A11:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-49:2003/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-50:2003 Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie IEC 60335-2-50:2002 |
This is the first publication |
EN 60335-2-50:2000 Note 2.1 |
|
|
|
EN 60335-2-50:2003/A1:2008 IEC 60335-2-50:2002/A1:2007 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-50:2003/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-51:2003 Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations IEC 60335-2-51:2002 |
This is the first publication |
EN 60335-2-51:1997 Note 2.1 |
|
|
|
EN 60335-2-51:2003/A1:2008 IEC 60335-2-51:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-51:2003/A2:2012 IEC 60335-2-51:2002/A2:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-52:2003 Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances IEC 60335-2-52:2002 |
This is the first publication |
EN 60335-2-52:1996 Note 2.1 |
|
|
|
EN 60335-2-52:2003/A11:2010/AC:2012 |
This is the first publication |
|
|
|
|
EN 60335-2-52:2003/A11:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-52:2003/A1:2008 IEC 60335-2-52:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-53:2011 Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins IEC 60335-2-53:2011 |
This is the first publication |
EN 60335-2-53:2003 + A1:2007 Note 2.1 |
|
|
Cenelec |
EN 60335-2-54:2008 Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam IEC 60335-2-54:2008 |
This is the first publication |
EN 60335-2-54:2003 + A11:2006 + A1:2004 + A2:2007 Note 2.1 |
|
|
|
EN 60335-2-54:2008/A11:2012/AC:2015 |
This is the first publication |
|
|
|
|
EN 60335-2-54:2008/A11:2012 |
This is the first publication |
Note 3 |
30.4.2016 |
|
|
EN 60335-2-54:2008/A1:2015 IEC 60335-2-54:2008/A1:2015 |
This is the first publication |
Note 3 |
9.9.2018 |
|
Cenelec |
EN 60335-2-55:2003 Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds IEC 60335-2-55:2002 |
This is the first publication |
EN 60335-2-55:1997 Note 2.1 |
|
|
|
EN 60335-2-55:2003/A1:2008 IEC 60335-2-55:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-56:2003 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances IEC 60335-2-56:2002 |
This is the first publication |
EN 60335-2-56:1997 Note 2.1 |
|
|
|
EN 60335-2-56:2003/A1:2008 IEC 60335-2-56:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-56:2003/A2:2014 IEC 60335-2-56:2002/A2:2014 |
This is the first publication |
Note 3 |
16.9.2017 |
|
Cenelec |
EN 60335-2-58:2005 Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines IEC 60335-2-58:2002 (Modified) |
This is the first publication |
EN 60335-2-58:1997 + A1:1999 Note 2.1 |
1.12.2007 |
|
Cenelec |
EN 60335-2-59:2003 Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers IEC 60335-2-59:2002 (Modified) |
This is the first publication |
EN 60335-2-59:1997 + A11:2000 + A1:2001 Note 2.1 |
|
|
|
EN 60335-2-59:2003/A1:2006 IEC 60335-2-59:2002/A1:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-59:2003/A2:2009 IEC 60335-2-59:2002/A2:2009 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-60:2003 Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas IEC 60335-2-60:2002 |
This is the first publication |
EN 60335-2-60:1997 Note 2.1 |
|
|
|
EN 60335-2-60:2003/A1:2005 IEC 60335-2-60:2002/A1:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-60:2003/A12:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-60:2003/A11:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-60:2003/A2:2008 IEC 60335-2-60:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-61:2003 Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters IEC 60335-2-61:2002 |
This is the first publication |
EN 60335-2-61:1996 + A1:2000 Note 2.1 |
|
|
|
EN 60335-2-61:2003/A1:2005 IEC 60335-2-61:2002/A1:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-61:2003/A2:2008 IEC 60335-2-61:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-62:2003 Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks IEC 60335-2-62:2002 |
This is the first publication |
EN 60335-2-62:1997 + A1:1999 + A2:2000 Note 2.1 |
|
|
|
EN 60335-2-62:2003/A1:2008 IEC 60335-2-62:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-62:2003/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-65:2003 Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances IEC 60335-2-65:2002 |
This is the first publication |
EN 60335-2-65:1995 + A1:2001 Note 2.1 |
|
|
|
EN 60335-2-65:2003/A1:2008 IEC 60335-2-65:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-65:2003/A11:2012 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-66:2003 Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters IEC 60335-2-66:2002 |
This is the first publication |
EN 60335-2-66:1995 + A1:2001 Note 2.1 |
|
|
|
EN 60335-2-66:2003/A1:2008 IEC 60335-2-66:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-66:2003/A2:2012 IEC 60335-2-66:2002/A2:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-70:2002 Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines IEC 60335-2-70:2002 |
This is the first publication |
EN 60335-2-70:1996 Note 2.1 |
|
|
Cenelec |
EN 60335-2-71:2003 Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals IEC 60335-2-71:2002 (Modified) |
This is the first publication |
EN 60335-2-71:1995 + A1:1998 + A2:1999 Note 2.1 |
|
|
|
EN 60335-2-71:2003/A1:2007 IEC 60335-2-71:2002/A1:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-73:2003 Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters IEC 60335-2-73:2002 (Modified) |
This is the first publication |
EN 60335-2-73:1996 Note 2.1 |
|
|
|
EN 60335-2-73:2003/A1:2006 IEC 60335-2-73:2002/A1:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-73:2003/A2:2009 IEC 60335-2-73:2002/A2:2009 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-74:2003 Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters IEC 60335-2-74:2002 |
This is the first publication |
EN 60335-2-74:1996 Note 2.1 |
|
|
|
EN 60335-2-74:2003/A1:2006 IEC 60335-2-74:2002/A1:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-74:2003/A2:2009 IEC 60335-2-74:2002/A2:2009 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-75:2004 Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines IEC 60335-2-75:2002 (Modified) |
This is the first publication |
EN 60335-2-63:1993 EN 60335-2-75:2002 Note 2.1 |
|
|
|
EN 60335-2-75:2004/A11:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-75:2004/A1:2005 IEC 60335-2-75:2002/A1:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-75:2004/A12:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-75:2004/A2:2008 IEC 60335-2-75:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-78:2003 Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues IEC 60335-2-78:2002 |
This is the first publication |
EN 60335-2-78:1997 Note 2.1 |
|
|
|
EN 60335-2-78:2003/A1:2008 IEC 60335-2-78:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-80:2003 +6Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans IEC 60335-2-80:2002 |
This is the first publication |
EN 60335-2-80:1997 Note 2.1 |
|
|
|
EN 60335-2-80:2003/A1:2004 IEC 60335-2-80:2002/A1:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-80:2003/A2:2009 IEC 60335-2-80:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-81:2003 Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats IEC 60335-2-81:2002 |
This is the first publication |
EN 60335-2-81:1997 Note 2.1 |
|
|
|
EN 60335-2-81:2003/A1:2007 IEC 60335-2-81:2002/A1:2007 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-81:2003/A2:2012 IEC 60335-2-81:2002/A2:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-82:2003 Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines IEC 60335-2-82:2002 |
This is the first publication |
EN 60335-2-82:2000 Note 2.1 |
|
|
|
EN 60335-2-82:2003/A1:2008 IEC 60335-2-82:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-83:2002 Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage IEC 60335-2-83:2001 |
This is the first publication |
|
|
|
|
EN 60335-2-83:2002/A1:2008 IEC 60335-2-83:2001/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-84:2003 Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets IEC 60335-2-84:2002 |
This is the first publication |
EN 60335-2-84:1998 Note 2.1 |
|
|
|
EN 60335-2-84:2003/A1:2008 IEC 60335-2-84:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-85:2003 Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers IEC 60335-2-85:2002 |
This is the first publication |
EN 60335-2-85:1998 + A1:2000 Note 2.1 |
|
|
|
EN 60335-2-85:2003/A1:2008 IEC 60335-2-85:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-86:2003 Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines IEC 60335-2-86:2002 (Modified) |
This is the first publication |
EN 60335-2-86:2000 Note 2.1 |
|
|
|
EN 60335-2-86:2003/A1:2005 IEC 60335-2-86:2002/A1:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-86:2003/A11:2016 |
This is the first publication |
Note 3 |
16.11.2018 |
|
|
EN 60335-2-86:2003/A2:2016 IEC 60335-2-86:2002/A2:2012 |
This is the first publication |
Note 3 |
19.2.2019 |
|
Cenelec |
EN 60335-2-87:2002 Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment IEC 60335-2-87:2002 |
This is the first publication |
EN 60335-2-87:1999 Note 2.1 |
|
|
|
EN 60335-2-87:2002/A1:2007 IEC 60335-2-87:2002/A1:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-88:2002 Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems IEC 60335-2-88:2002 |
This is the first publication |
EN 60335-2-88:1997 Note 2.1 |
|
|
Cenelec |
EN 60335-2-90:2006 Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens IEC 60335-2-90:2006 |
This is the first publication |
EN 60335-2-90:2002 + A1:2003 Note 2.1 |
|
|
|
EN 60335-2-90:2006/A1:2010 IEC 60335-2-90:2006/A1:2010 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-96:2002 Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating IEC 60335-2-96:2002 |
This is the first publication |
|
|
|
|
EN 60335-2-96:2002/A1:2004 IEC 60335-2-96:2002/A1:2003 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-96:2002/A2:2009 IEC 60335-2-96:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-97:2006 Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment IEC 60335-2-97:2002 (Modified) + A1:2004 (Modified) |
This is the first publication |
EN 60335-2-97:2000 + A11:2006 Note 2.1 |
|
|
|
EN 60335-2-97:2006/A11:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-97:2006/A12:2015 |
This is the first publication |
Note 3 |
29.9.2017 |
|
|
EN 60335-2-97:2006/A2:2010 IEC 60335-2-97:2002/A2:2008 (Modified) |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-98:2003 Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers IEC 60335-2-98:2002 |
This is the first publication |
EN 60335-2-98:1997 + A1:2000 Note 2.1 |
|
|
|
EN 60335-2-98:2003/A1:2005 IEC 60335-2-98:2002/A1:2004 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-98:2003/A2:2008 IEC 60335-2-98:2002/A2:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-99:2003 Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods IEC 60335-2-99:2003 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-101:2002 Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers IEC 60335-2-101:2002 |
This is the first publication |
|
|
|
|
EN 60335-2-101:2002/A1:2008 IEC 60335-2-101:2002/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-101:2002/A2:2014 IEC 60335-2-101:2002/A2:2014 |
This is the first publication |
Note 3 |
16.9.2017 |
|
Cenelec |
EN 60335-2-102:2006 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections IEC 60335-2-102:2004 (Modified) |
This is the first publication |
EN 50165:1997 + A1:2001 Note 2.1 |
|
|
|
EN 60335-2-102:2006/A1:2010 IEC 60335-2-102:2004/A1:2008 (Modified) |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections IEC 60335-2-102:2004 (Modified) IEC 60335-2-102:2004/A1:2008 (Modified) + A1:2008 (Modified) IEC 60335-2-102:2004/A2:2012 (Modified) |
This is the first publication |
EN 60335-2-102:2006 + A1:2010 + A2:2012 Note 2.1 |
22.1.2019 |
|
Cenelec |
EN 60335-2-105:2005 Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets IEC 60335-2-105:2004 |
This is the first publication |
|
|
|
|
EN 60335-2-105:2005/A11:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 60335-2-105:2005/A1:2008 IEC 60335-2-105:2004/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60335-2-106:2007 Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings IEC 60335-2-106:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-108:2008 Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers IEC 60335-2-108:2008 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-109:2010 Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances IEC 60335-2-109:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 60358-1:2012 Coupling capacitors and capacitor dividers - Part 1: General rules IEC 60358-1:2012 |
This is the first publication |
HD 597 S1:1992 Note 2.1 |
|
|
|
EN 60358-1:2012/AC:2013 |
This is the first publication |
|
|
|
Cenelec |
EN 60360:1998 Standard method of measurement of lamp cap temperature rise IEC 60360:1998 |
This is the first publication |
EN 60360:1989 + A1:1994 + A2:1997 Note 2.1 |
|
|
Cenelec |
EN 60399:2004 Barrel thread for lampholders with shade holder ring IEC 60399:2004 |
This is the first publication |
EN 60399:1993 + A1:1997 + A2:1999 Note 2.1 |
|
|
|
EN 60399:2004/A1:2008 IEC 60399:2004/A1:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60400:2008 Lampholders for tubular fluorescent lamps and starterholders IEC 60400:2008 |
This is the first publication |
EN 60400:2000 + A1:2002 + A2:2004 Note 2.1 |
|
|
|
EN 60400:2008/A1:2011 IEC 60400:2008/A1:2011 |
This is the first publication |
Note 3 |
|
|
|
EN 60400:2008/A2:2014 IEC 60400:2008/A2:2014 |
This is the first publication |
Note 3 |
4.8.2017 |
|
Cenelec |
EN 60423:2007 Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings IEC 60423:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60432-1:2000 Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes IEC 60432-1:1999 (Modified) |
This is the first publication |
EN 60432-1:1994 + A1:1997 + A2:1997 Note 2.1 |
|
|
|
EN 60432-1:2000/A1:2005 IEC 60432-1:1999/A1:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60432-1:2000/A2:2012 IEC 60432-1:1999/A2:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60432-2:2000 Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes IEC 60432-2:1999 (Modified) |
This is the first publication |
EN 60432-2:1994 + A1:1996 + A2:1997 Note 2.1 |
|
|
|
EN 60432-2:2000/A1:2005 IEC 60432-2:1999/A1:2005 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60432-2:2000/A2:2012 IEC 60432-2:1999/A2:2012 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60432-3:2013 Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) IEC 60432-3:2012 |
This is the first publication |
EN 60432-3:2003 + A1:2005 + A2:2008 Note 2.1 |
|
|
Cenelec |
EN 60477:1997 Laboratory d.c. resistors IEC 60477:1974 |
This is the first publication |
|
|
|
|
EN 60477:1997/A1:1997 IEC 60477:1974/A1:1997 |
This is the first publication |
Note 3 |
1.9.1998 |
|
Cenelec |
EN 60477-2:1997 Laboratory resistors - Part 2: Laboratory a.c. resistors IEC 60477-2:1979 |
This is the first publication |
|
|
|
|
EN 60477-2:1997/A1:1997 IEC 60477-2:1979/A1:1997 |
This is the first publication |
Note 3 |
1.9.1998 |
|
Cenelec |
EN 60519-1:2011 Safety in electroheating installations - Part 1: General requirements IEC 60 IEC 60519-1:2010 |
This is the first publication |
EN 60519-1:2003 Note 2.1 |
|
|
Cenelec |
EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements IEC 60519-1:2015 |
This is the first publication |
EN 60519-1:2011 Note 2.1 |
14.4.2018 |
|
Cenelec |
EN 60519-2:2006 Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment IEC 60519-2:2006 |
This is the first publication |
EN 60519-2:1993 Note 2.1 |
|
|
Cenelec |
EN 60519-3:2005 Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations IEC 60519-3:2005 |
This is the first publication |
EN 60519-3:1995 Note 2.1 |
|
|
Cenelec |
EN 60519-4:2006 Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations IEC 60519-4:2006 |
This is the first publication |
EN 60519-4:1997 + A1:2000 Note 2.1 |
|
|
Cenelec |
EN 60519-4:2013 Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations IEC 60519-4:2013 |
This is the first publication |
EN 60519-4:2006 Note 2.1 |
24.7.2016 |
|
Cenelec |
EN 60519-6:2011 Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment IEC 60519-6:2011 |
This is the first publication |
EN 60519-6:2002 Note 2.1 |
|
|
Cenelec |
EN 60519-7:2008 Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns IEC 60519-7:2008 |
This is the first publication |
|
|
|
Cenelec |
EN 60519-8:2005 Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces IEC 60519-8:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60519-9:2005 Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations IEC 60519-9:2005 |
This is the first publication |
EN 60519-9:1995 Note 2.1 |
|
|
Cenelec |
EN 60519-10:2005 Safety in electroheat installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications IEC 60519-10:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60519-10:2013 Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications IEC 60519-10:2013 |
This is the first publication |
EN 60519-10:2005 Note 2.1 |
|
|
Cenelec |
EN 60519-12:2013 Safety in electroheating installations - Part 12: Particular requirements for infrared electroheating installations IEC 60519-12:2013 |
This is the first publication |
|
|
|
Cenelec |
EN 60519-21:2009 Safety in electroheat installations - Part 21: Particular requirements for resistance heating equipment - Heating and melting glass equipment IEC 60519-21:2008 |
This is the first publication |
EN 60519-21:1998 Note 2.1 |
|
|
Cenelec |
EN 60523:1993 Direct-current potentiometers IEC 60523:1975 + A1:1979 |
This is the first publication |
|
|
|
|
EN 60523:1993/A2:1997 IEC 60523:1975/A2:1997 |
This is the first publication |
Note 3 |
1.7.1998 |
|
Cenelec |
EN 60524:1993 Direct-current resistive volt ratio boxes IEC 60524:1975 + A1:1981 |
This is the first publication |
|
|
|
|
EN 60524:1993/A2:1997 IEC 60524:1975/A2:1997 |
This is the first publication |
Note 3 |
1.7.1998 |
|
Cenelec |
EN 60529:1991 Degrees of protection provided by enclosures (IP Code) IEC 60529:1989 |
This is the first publication |
|
|
|
|
EN 60529:1991/A1:2000 IEC 60529:1989/A1:1999 |
This is the first publication |
Note 3 |
|
|
|
EN 60529:1991/A2:2013 IEC 60529:1989/A2:2013 |
This is the first publication |
Note 3 |
3.10.2016 |
|
|
EN 60529:1991/AC:1993 |
This is the first publication |
|
|
|
Cenelec |
EN 60564:1993 D.C. bridges for measuring resistance IEC 60564:1977 + A1:1981 |
This is the first publication |
|
|
|
|
EN 60564:1993/A2:1997 IEC 60564:1977/A2:1997 |
This is the first publication |
Note 3 |
1.7.1998 |
|
Cenelec |
EN 60570:2003 Electrical supply track systems for luminaires IEC 60570:2003 (Modified) |
This is the first publication |
EN 60570:1996 + A11:1998 + A12:2000 + A1:1998 + A2:2000 EN 60570-2-1:1994 + A1:1996 Note 2.1 |
|
|
Cenelec |
EN 60598-1:2008 Luminaires - Part 1: General requirements and tests IEC 60 IEC 60598-1:2008 (Modified) |
This is the first publication |
EN 60598-1:2004 + A1:2006 Note 2.1 |
|
|
|
EN 60598-1:2008/A11:2009 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60598-1:2015 Luminaires - Part 1: General requirements and tests IEC 60598-1:2014 (Modified) |
This is the first publication |
EN 60598-1:2008 + A11:2009 Note 2.1 |
20.10.2017 |
|
|
EN 60598-1:2015/AC:2015 |
This is the first publication |
|
|
|
|
EN 60598-1:2015/AC:2016 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-1:1989 Luminaires - Part 2: Particular requirements - Section 1: Fixed general purpose luminaires IEC 60598-2-1:1979 + A1:1987 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-2:2012 Luminaires - Part 2-2: Particular requirements - Recessed luminaires IEC 60598-2-2:2011 |
This is the first publication |
EN 60598-2-2:1996 + A1:1997 Note 2.1 |
|
|
Cenelec |
EN 60598-2-3:2003 Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting IEC 60598-2-3:2002 |
This is the first publication |
EN 60598-2-3:1994 + A1:1997 + A2:2001 Note 2.1 |
|
|
|
EN 60598-2-3:2003/A1:2011 IEC 60598-2-3:2002/A1:2011 |
This is the first publication |
Note 3 |
|
|
|
EN 60598-2-3:2003/AC:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-4:1997 Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires IEC 60598-2-4:1997 |
This is the first publication |
EN 60598-2-4:1989 + A3:1993 Note 2.1 |
|
|
Cenelec |
EN 60598-2-5:1998 Luminaires - Part 2-5: Particular requirements - Floodlights IEC 60598-2-5:1998 |
This is the first publication |
EN 60598-2-5:1989 + A2:1994 Note 2.1 |
|
|
|
EN 60598-2-5:1998/AC:1998 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-5:2015 Luminaires - Part 2-5: Particular requirements - Floodlights IEC 60598-2-5:2015 |
This is the first publication |
EN 60598-2-5:1998 Note 2.1 |
10.9.2018 |
|
Cenelec |
EN 60598-2-7:1989 Luminaires - Part 2: Particular requirements - Section 7: Portable luminaires for garden use IEC 60598-2-7:1982 (Modified) + A1:1987 (Modified) |
This is the first publication |
|
|
|
|
EN 60598-2-7:1989/A13:1997 |
This is the first publication |
Note 3 |
|
|
|
EN 60598-2-7:1989/A2:1996 IEC 60598-2-7:1982/A2:1994 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60598-2-7:1989/A2:1996/AC:1999 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-8:1997 Luminaires - Part 2-8: Particular requirements - Handlamps IEC 60598-2-8:1996 (Modified) |
This is the first publication |
EN 60598-2-8:1989 + A2:1993 Note 2.1 |
|
|
|
EN 60598-2-8:1997/A1:2000 IEC 60598-2-8:1996/A1:2000 |
This is the first publication |
Note 3 |
|
|
|
EN 60598-2-8:1997/A2:2008 IEC 60598-2-8:1996/A2:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60598-2-8:2013 Luminaires - Part 2-8: Particular requirements - Handlamps IEC 60598-2-8:2013 |
This is the first publication |
EN 60598-2-8:1997 + A1:2000 + A2:2008 Note 2.1 |
3.6.2016 |
|
Cenelec |
EN 60598-2-9:1989 Luminaires - Part 2: Particular requirements - Section 9: Photo and film luminaires (non-professional) IEC 60598-2-9:1987 |
This is the first publication |
|
|
|
|
EN 60598-2-9:1989/A1:1994 IEC 60598-2-9:1987/A1:1993 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60598-2-10:2003 Luminaires - Part 2-10: Particular requirements - Portable luminaires for children IEC 60598-2-10:2003 |
This is the first publication |
|
|
|
|
EN 60598-2-10:2003/AC:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-11:2005 Luminaires - Part 2-11: Particular requirements - Aquarium luminaires IEC 60598-2-11:2005 |
This is the first publication |
|
|
|
|
EN 60598-2-11:2005/AC:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-11:2013 Luminaires - Part 2-11: Particular requirements - Aquarium luminaires IEC 60598-2-11:2013 |
This is the first publication |
EN 60598-2-11:2005 Note 2.1 |
20.6.2016 |
|
Cenelec |
EN 60598-2-12:2006 Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights IEC 60598 IEC 60598-2-12:2006 |
This is the first publication |
|
|
|
|
EN 60598-2-12:2006/AC:2006 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-12:2013 Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights IEC 60598-2-12:2013 |
This is the first publication |
EN 60598-2-12:2006 Note 2.1 |
3.6.2016 |
|
Cenelec |
EN 60598-2-13:2006 Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires IEC 60598-2-13:2006 |
This is the first publication |
|
|
|
|
EN 60598-2-13:2006/A1:2012 IEC 60598-2-13:2006/A1:2011 |
This is the first publication |
Note 3 |
|
|
|
EN 60598-2-13:2006/AC:2006 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-14:2009 Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment IEC 60598-2-14:2009 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-17:1989 Luminaires - Part 2: Particular requirements - Section 17: Luminaires for stage lighting, television film and photographic studios (outdoor and indoor) IEC 60598-2-17:1984 + A1:1987 |
This is the first publication |
|
|
|
|
EN 60598-2-17:1989/A2:1991 IEC 60598-2-17:1984/A2:1990 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60598-2-19:1989 Luminaires - Part 2: Particular requirements - Section 19: Air-handling luminaires (safety requirements) IEC 60598-2-19:1981 (Modified) + A1:1987 (Modified) |
This is the first publication |
|
|
|
|
EN 60598-2-19:1989/A2:1998 IEC 60598-2-19:1981/A2:1997 |
This is the first publication |
Note 3 |
|
|
|
EN 60598-2-19:1989/AC:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-20:2010 Luminaires - Part 2-20: Particular requirements - Lighting chains IEC 60598-2-20:2010 (Modified) |
This is the first publication |
EN 60598-2-20:1997 + A1:1998 + A2:2004 Note 2.1 |
|
|
|
EN 60598-2-20:2010/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-20:2015 Luminaires - Part 2-20: Particular requirements - Lighting chains IEC 60598-2-20:2014 |
This is the first publication |
EN 60598-2-20:2010 Note 2.1 |
30.12.2017 |
|
Cenelec |
EN 60598-2-21:2015 Luminaires - Part 2-21: Particular requirements - Rope lights IEC 60598-2-21:2014 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-22:1998 Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting IEC 60598-2-22:1997 (Modified) |
This is the first publication |
EN 60598-2-22:1990 Note 2.1 |
|
|
|
EN 60598-2-22:1998/A1:2003 IEC 60598-2-22:1997/A1:2002 |
This is the first publication |
Note 3 |
|
|
|
EN 60598-2-22:1998/A2:2008 IEC 60598-2-22:1997/A2:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60598-2-22:1998/AC:1999 |
This is the first publication |
|
|
|
|
EN 60598-2-22:1998/AC:2005 |
This is the first publication |
|
|
|
|
EN 60598-2-22:1998/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-22:2014 Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting IEC 60598-2-22:2014 |
This is the first publication |
EN 60598-2-22:1998 + A1:2003 + A2:2008 Note 2.1 |
24.7.2017 |
|
|
EN 60598-2-22:2014/AC:2015 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-23:1996 Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for filament lamps IEC 60598-2-23:1996 |
This is the first publication |
|
|
|
|
EN 60598-2-23:1996/A1:2000 IEC 60598-2-23:1996/A1:2000 |
This is the first publication |
Note 3 |
|
|
|
EN 60598-2-23:1996/AC:1997 |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-24:1998 Luminaires - Part 2: Particular requirements - Section 24: Luminaires with limited surface temperatures IEC 60598-2-24:1997 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 60598-2-24:2013 Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures IEC 60598-2-24:2013 |
This is the first publication |
EN 60598-2-24:1998 Note 2.1 |
24.7.2016 |
|
Cenelec |
EN 60598-2-25:1994 Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings IEC 60598 IEC 60598-2-25:1994 |
This is the first publication |
|
|
|
|
EN 60598-2-25:1994/A1:2004 IEC 60598-2-25:1994/A1:2004 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60618:1997 Inductive voltage dividers IEC 60618:1978 + A1:1981 |
This is the first publication |
|
|
|
|
EN 60618:1997/A2:1997 IEC 60618:1978/A2:1997 |
This is the first publication |
Note 3 |
1.9.1998 |
|
Cenelec |
EN 60645-1:2001 Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometers IEC 60645-1:2001 |
This is the first publication |
EN 60645-1:1994 Note 2.1 |
1.10.2004 |
|
Cenelec |
EN 60645-1:2015 Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone audiometry IEC 60645-1:2012 |
This is the first publication |
EN 60645-1:2001 EN 60645-4:1995 Note 2.1 |
5.11.2017 |
|
Cenelec |
EN 60645-3:2007 Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration IEC 60645-3:2007 |
This is the first publication |
EN 60645-3:1995 Note 2.1 |
1.6.2010 |
|
Cenelec |
EN 60645-4:1995 Audiometers - Part 4: Equipment for extended high-frequency audiometry IEC 60645-4:1994 |
This is the first publication |
|
|
|
Cenelec |
EN 60645-6:2010 Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions IEC 60645-6:2009 |
This is the first publication |
|
|
|
Cenelec |
EN 60645-7:2010 Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses IEC 60645-7:2009 |
This is the first publication |
|
|
|
Cenelec |
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests IEC 60664-1:2007 |
This is the first publication |
EN 60664-1:2003 Note 2.1 |
|
|
Cenelec |
EN 60664-3:2003 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution IEC 60664-3:2003 |
This is the first publication |
HD 625.3 S1:1997 Note 2.1 |
|
|
|
EN 60664-3:2003/A1:2010 IEC 60664-3:2003/A1:2010 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60664-4:2006 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress IEC 60664-4:2005 |
This is the first publication |
|
|
|
|
EN 60664-4:2006/AC:2006 |
This is the first publication |
|
|
|
Cenelec |
EN 60669-1:1999 Switches for household and similar fixed-electrical installations - Part 1: General requirements IEC 60669-1:1998 (Modified) |
This is the first publication |
EN 60669-1:1995 + A2:1996 Note 2.1 |
|
|
|
EN 60669-1:1999/A1:2002 IEC 60669-1:1998/A1:1999 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60669-1:1999/A2:2008 IEC 60669-1:1998/A2:2006 (Modified) |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60669-2-1:2004 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches IEC 60669-2-1:2002 (Modified) + IS1:2011 + IS2:2012 |
This is the first publication |
EN 60669-2-1:2000 + A2:2001 Note 2.1 |
|
|
|
EN 60669-2-1:2004/A1:2009 IEC 60669-2-1:2002/A1:2008 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60669-2-1:2004/A12:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 60669-2-1:2004/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60669-2-2:2006 Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS) IEC 60669-2-2:2006 |
This is the first publication |
EN 60669-2-2:1997 + A1:1997 Note 2.1 |
|
|
Cenelec |
EN 60669-2-3:2006 Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time delay switches (TDS) IEC 60669-2-3:2006 |
This is the first publication |
EN 60669-2-3:1997 Note 2.1 |
|
|
Cenelec |
EN 60669-2-4:2005 Switches for household and similar fixed electrical installations - Part 2-4: Particular requirements - Isolating switches IEC 60669-2-4:2004 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 60669-2-6:2012 Switches for household and similar fixed electrical installations - Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires IEC 60669-2-6:2012 (Modified) |
This is the first publication |
EN 50425:2008 Note 2.1 |
|
|
Cenelec |
EN 60670-1:2005 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements IEC 60670-1:2002 (Modified) |
This is the first publication |
|
|
|
|
EN 60670-1:2005/A1:2013 IEC 60670-1:2002/A1:2011 (Modified) |
This is the first publication |
Note 3 |
31.12.2017 |
|
|
EN 60670-1:2005/AC:2007 |
This is the first publication |
|
|
|
|
EN 60670-1:2005/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 60670-21:2007 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means IEC 60670-21:2004 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 60670-22:2006 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures IEC 60670-22:2003 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 60670-23:2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures IEC 60670-23:2006 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 60670-24:2013 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment IEC 60670-24:2011 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals IEC IEC 60688:2012 |
This is the first publication |
|
|
|
Cenelec |
EN 60691:2003 Thermal-links - Requirements and application guide IEC 60691:2002 |
This is the first publication |
EN 60691:1995 + A2:2000 Note 2.1 |
1.12.2005 |
|
|
EN 60691:2003/A1:2007 IEC 60691:2002/A1:2006 |
This is the first publication |
Note 3 |
1.12.2009 |
|
|
EN 60691:2003/A2:2010 IEC 60691:2002/A2:2010 |
This is the first publication |
Note 3 |
1.3.2013 |
|
Cenelec |
EN 60695-2-10:2001 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure IEC 60695-2-10:2000 |
This is the first publication |
EN 60695-2-1/0:1996 Note 2.1 |
1.11.2003 |
|
Cenelec |
EN 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure IEC 60695-2-10:2013 |
This is the first publication |
EN 60695-2-10:2001 Note 2.1 |
|
|
Cenelec |
EN 60695-2-11:2001 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products IEC 60695-2-11:2000 |
This is the first publication |
EN 60695-2-1/1:1996 Note 2.1 |
1.11.2003 |
|
Cenelec |
EN 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) IEC 60695-2-11:2014 |
This is the first publication |
EN 60695-2-11:2001 Note 2.1 |
|
|
Cenelec |
EN 60695-10-2:2003 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test IEC 60695-10-2:2003 |
This is the first publication |
|
|
|
Cenelec |
EN 60695-10-2:2014 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method IEC 60695-10-2:2014 |
This is the first publication |
EN 60695-10-2:2003 Note 2.1 |
|
|
Cenelec |
EN 60695-10-3:2002 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test IEC 60695-10-3:2002 |
This is the first publication |
|
|
|
Cenelec |
EN 60695-11-2:2003 Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance IEC 60695-11-2:2003 |
This is the first publication |
EN 60695-2-4/1:1993 + A1:1996 Note 2.1 |
1.10.2006 |
|
Cenelec |
EN 60695-11-2:2014 Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidance IEC 60695-11-2:2013 |
This is the first publication |
EN 60695-11-2:2003 Note 2.1 |
|
|
Cenelec |
EN 60695-11-3:2012 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods IEC 60695-11-3:2012 |
This is the first publication |
|
|
|
Cenelec |
EN 60695-11-4:2011 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method IEC 60695-11-4:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 60695-11-5:2005 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance IEC 60695-11-5:2004 |
This is the first publication |
EN 60695-2-2:1994 + A1:1995 Note 2.1 |
|
|
Cenelec |
EN 60695-11-10:1999 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods IEC 60695-11-10:1999 |
This is the first publication |
|
|
|
|
EN 60695-11-10:1999/A1:2003 IEC 60695-11-10:1999/A1:2003 |
This is the first publication |
Note 3 |
1.9.2006 |
|
Cenelec |
EN 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods IEC 60695-11-10:2013 |
This is the first publication |
EN 60695-11-10:1999 + A1:2003 Note 2.1 |
|
|
|
EN 60695-11-10:2013/AC:2014 |
This is the first publication |
|
|
|
Cenelec |
EN 60695-11-20:1999 Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods IEC 60695-11-20:1999 |
This is the first publication |
|
|
|
|
EN 60695-11-20:1999/A1:2003 IEC 60695-11-20:1999/A1:2003 |
This is the first publication |
Note 3 |
1.9.2006 |
|
Cenelec |
EN 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method IEC 60695-11-20:2015 |
This is the first publication |
EN 60695-11-20:1999 + A1:2003 Note 2.1 |
|
|
|
EN 60695-11-20:2015/AC:2016 |
This is the first publication |
|
|
|
Cenelec |
EN 60702-1:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables IEC 60702-1:2002 |
This is the first publication |
HD 586.1 S1:1994 Note 2.1 |
|
|
|
EN 60702-1:2002/A1:2015 IEC 60702-1:2002/A1:2015 |
This is the first publication |
Note 3 |
19.2.2018 |
|
Cenelec |
EN 60702-2:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations IEC 60702-2:2002 |
This is the first publication |
HD 586.2 S1:1994 Note 2.1 |
|
|
|
EN 60702-2:2002/A1:2015 IEC 60702-2:2002/A1:2015 |
This is the first publication |
Note 3 |
19.2.2018 |
|
Cenelec |
EN 60715:2001 Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations IEC 60715:1981 + A1:1995 |
This is the first publication |
|
|
|
Cenelec |
EN 60719:1993 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V IEC 60719:1992 |
This is the first publication |
|
|
|
Cenelec |
EN 60728-11:2010 Cable networks for television signals, sound signals and interactive services - Part 11: Safety IEC 60728-11:2010 |
This is the first publication |
EN 60728-11:2005 Note 2.1 |
|
|
Cenelec |
EN 60730-1:2000 Automatic electrical controls for household and similar use - Part 1: General requirements IEC 60730-1:1999 (Modified) |
This is the first publication |
EN 60730-1:1995 + A11:1996 + A12:1996 + A13:1998 + A14:1998 + A15:1998 + A16:1999 + A17:2000 + A18:2003 + A1:1997 + A2:1998 Note 2.1 |
4.5.1998 |
|
|
EN 60730-1:2000/A1:2004 IEC 60730-1:1999/A1:2003 (Modified) |
This is the first publication |
Note 3 |
17.3.2005 |
|
|
EN 60730-1:2000/A13:2004 |
This is the first publication |
Note 3 |
1.9.2007 |
|
|
EN 60730-1:2000/A12:2003 |
This is the first publication |
Note 3 |
1.6.2010 |
|
|
EN 60730-1:2000/A14:2005 |
This is the first publication |
Note 3 |
1.6.2010 |
|
|
EN 60730-1:2000/A2:2008 IEC 60730-1:1999/A2:2007 (Modified) |
This is the first publication |
Note 3 |
1.6.2011 |
|
|
EN 60730-1:2000/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60730-1:2011 Automatic electrical controls for household and similar use - Part 1: General requirements IEC 60730-1:2010 (Modified) |
This is the first publication |
EN 60730-1:2000 + A11:2002 + A12:2003 + A13:2004 + A14:2005 + A15:2007 + A1:2004 + A2:2008 Note 2.1 |
|
|
Cenelec |
EN 60730-1:1995 Automatic electrical controls for household and similar use - Part 1: General requirements IEC 60730-1:1993 (Modified) |
This is the first publication |
EN 60730-1:1991 + A11:1991 + A12:1993 + A14:1995 + A1:1991 Note 2.1 |
1.10.2013 |
|
|
EN 60730-1:1995/A12:1996 |
This is the first publication |
Note 3 |
1.12.1996 |
|
|
EN 60730-1:1995/A1:1997 IEC 60730-1:1993/A1:1994 (Modified) |
This is the first publication |
Note 3 |
1.12.1996 |
|
|
EN 60730-1:1995/A11:1996 |
This is the first publication |
Note 3 |
1.1.1998 |
|
|
EN 60730-1:1995/A15:1998 |
This is the first publication |
Note 3 |
24.8.1998 |
|
|
EN 60730-1:1995/A14:1998 |
This is the first publication |
Note 3 |
24.8.1998 |
|
|
EN 60730-1:1995/A16:1999 |
This is the first publication |
Note 3 |
1.10.2000 |
|
|
EN 60730-1:1995/A17:2000 |
This is the first publication |
Note 3 |
1.10.2002 |
|
|
EN 60730-1:1995/A18:2003 |
This is the first publication |
Note 3 |
1.6.2010 |
|
|
EN 60730-1:1995/A2:1998 IEC 60730-1:1993/A2:1997 |
This is the first publication |
Note 3 |
1.12.1996 |
|
|
EN 60730-1:1995/AC:1997 |
This is the first publication |
|
|
|
|
EN 60730-1:1995/AC:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 60730-2-2:2002 Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors IEC 60730-2-2:2001 (Modified) |
This is the first publication |
EN 60730-2-2:1991 + A11:1995 + A1:1997 + A2:1997 Note 2.1 |
|
|
|
EN 60730-2-2:2002/A11:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60730-2-2:2002/A1:2006 IEC 60730-2-2:2001/A1:2005 (Modified) |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60730-2-3:2007 Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps IEC 60730-2-3:2006 (Modified) |
This is the first publication |
EN 60730-2-3:1992 + A11:2005 + A1:1998 + A2:2001 Note 2.1 |
|
|
Cenelec |
EN 60730-2-4:2007 Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type IEC 60730-2-4:2006 (Modified) |
This is the first publication |
EN 60730-2-4:1993 + A1:1998 + A2:2002 Note 2.1 |
|
|
Cenelec |
EN 60730-2-5:2002 Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems IEC 60730-2-5:2000 (Modified) |
This is the first publication |
EN 60730-2-5:1995 + A1:1996 + A2:1998 Note 2.1 |
|
|
|
EN 60730-2-5:2002/A11:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60730-2-5:2002/A1:2004 IEC 60730-2-5:2000/A1:2004 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60730-2-5:2002/A2:2010 IEC 60730-2-5:2000/A2:2008 (Modified) |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60730-2-5:2015 Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems IEC 60730-2-5:2013 (Modified) |
This is the first publication |
EN 60730-2-5:2002 + A11:2005 + A1:2004 + A2:2010 Note 2.1 |
17.11.2017 |
|
Cenelec |
EN 60730-2-6:2008 Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements IEC 60730-2-6:2007 (Modified) |
This is the first publication |
EN 60730-2-6:1995 + A1:1997 + A2:1998 Note 2.1 |
|
|
Cenelec |
EN 60730-2-6:2016 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements IEC 60730-2-6:2015 |
This is the first publication |
EN 60730-2-6:2008 Note 2.1 |
26.2.2019 |
|
Cenelec |
EN 60730-2-7:2010 Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches IEC 60730-2-7:2008 (Modified) |
This is the first publication |
EN 60730-2-7:1991 + A11:1994 + A12:1993 + A13:2003 + A14:2003 + A1:1997 Note 2.1 |
|
|
|
EN 60730-2-7:2010/AC:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 60730-2-8:2002 Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements IEC 60730-2-8:2000 (Modified) |
This is the first publication |
EN 60730-2-8:1995 + A1:1997 + A2:1997 Note 2.1 |
|
|
|
EN 60730-2-8:2002/A1:2003 IEC 60730-2-8:2000/A1:2002 (Modified) |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls IEC 60730-2-9:2008 (Modified) |
This is the first publication |
EN 60730-2-9:2002 + A11:2003 + A12:2004 + A1:2003 + A2:2005 Note 2.1 |
|
|
Cenelec |
EN 60730-2-10:2007 Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays IEC 60730-2-10:2006 |
This is the first publication |
EN 60730-2-10:1995 + A1:1996 + A2:2002 Note 2.1 |
|
|
Cenelec |
EN 60730-2-11:2008 Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators IEC 60730-2-11:2006 |
This is the first publication |
EN 60730-2-11:1993 + A11:2005 + A1:1997 + A2:1998 Note 2.1 |
|
|
Cenelec |
EN 60730-2-12:2006 Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks IEC 60730-2-12:2005 (Modified) |
This is the first publication |
EN 60730-2-12:1993 + A11:2005 + A1:1997 Note 2.1 |
|
|
|
EN 60730-2-12:2006/A11:2008 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60730-2-13:2008 Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls IEC 60730-2-13:2006 (Modified) |
This is the first publication |
EN 60730-2-13:1998 + A11:2005 + A1:1998 + A2:2002 Note 2.1 |
|
|
Cenelec |
EN 60730-2-14:1997 Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators IEC 60730-2-14:1995 (Modified) |
This is the first publication |
|
|
|
|
EN 60730-2-14:1997/A11:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60730-2-14:1997/A1:2001 IEC 60730-2-14:1995/A1:2001 |
This is the first publication |
Note 3 |
|
|
|
EN 60730-2-14:1997/A2:2008 IEC 60730-2-14:1995/A2:2007 (Modified) |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60730-2-15:2010 Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls IEC 60730-2-15:2008 (Modified) |
This is the first publication |
EN 60730-2-15:1995 + A11:2005 + A1:1998 EN 60730-2-16:1997 + A11:2005 + A1:1998 + A2:2001 EN 60730-2-18:1999 + A11:2005 Note 2.1 |
|
|
Cenelec |
EN 60730-2-19:2002 Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements IEC 60730-2-19:1997 (Modified) + A1:2000 (Modified) |
This is the first publication |
|
|
|
|
EN 60730-2-19:2002/A11:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60730-2-19:2002/A2:2008 IEC 60730-2-19:1997/A2:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60754-1:2014 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content IEC 60754-1:2011 |
This is the first publication |
EN 50267-1:1998 EN 50267-2-1:1998 EN 50267-2-2:1998 EN 50267-2-3:1998 Note 2.1 |
27.1.2017 |
|
Cenelec |
EN 60754-2:2014 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity IEC 60754-2:2011 |
This is the first publication |
EN 50267-1:1998 EN 50267-2-1:1998 EN 50267-2-2:1998 EN 50267-2-3:1998 Note 2.1 |
27.1.2017 |
|
Cenelec |
EN 60799:1998 Electrical accessories - Cord sets and interconnection cord sets IEC 60799:1998 |
This is the first publication |
EN 60799:1987 + A1:1994 Note 2.1 |
|
|
Cenelec |
EN 60811-100:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General IEC 60811-100:2012 |
This is the first publication |
EN 60811-1-1:1995 + A1:2001 EN 60811-1-2:1995 + A2:2000 EN 60811-1-3:1995 + A1:2001 EN 60811-1-4:1995 + A2:2001 EN 60811-2-1:1998 + A1:2001 EN 60811-3-1:1995 + A1:1996 + A2:2001 EN 60811-3-2:1995 + A2:2004 EN 60811-4-1:2004 EN 60811-4-2:2004 EN 60811-5-1:1999 + A1:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness IEC 60811-201:2012 |
This is the first publication |
EN 60811-1-1:1995 + A1:2001 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-202:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath IEC 60811-202:2012 |
This is the first publication |
EN 60811-1-1:1995 + A1:2001 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-203:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions IEC 60811-203:2012 |
This is the first publication |
EN 60811-1-1:1995 + A1:2001 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-301:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 oC of filling compounds IEC 60811-301:2012 |
This is the first publication |
EN 60811-5-1:1999 + A1:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-302:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 oC and 100 oC of filling compounds IEC 60811-302:2012 |
This is the first publication |
EN 60811-5-1:1999 + A1:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven IEC 60811-401:2012 |
This is the first publication |
EN 60811-1-2:1995 + A2:2000 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-402:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests IEC 60811-402:2012 |
This is the first publication |
EN 60811-1-3:1995 + A1:2001 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-403:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds IEC 60811-403:2012 |
This is the first publication |
EN 60811-2-1:1998 + A1:2001 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-404:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths IEC 60811-404:2012 |
This is the first publication |
EN 60811-2-1:1998 + A1:2001 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-405:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths IEC 60811-405:2012 |
This is the first publication |
EN 60811-3-2:1995 + A2:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-406:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds IEC 60811-406:2012 |
This is the first publication |
EN 60811-4-1:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds IEC 60811-407:2012 |
This is the first publication |
EN 60811-4-2:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-408:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds IEC 60811-408:2012 |
This is the first publication |
EN 60811-4-2:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths IEC 60811-409:2012 |
This is the first publication |
EN 60811-3-2:1995 + A2:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-410:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors IEC 60811-410:2012 |
This is the first publication |
EN 60811-4-2:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-411:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds IEC 60811-411:2012 |
This is the first publication |
EN 60811-5-1:1999 + A1:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb IEC 60811-412:2012 |
This is the first publication |
EN 60811-1-2:1995 + A2:2000 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-501:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds IEC 60811-501:2012 |
This is the first publication |
EN 60811-1-1:1995 + A1:2001 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations IEC 60811-502:2012 |
This is the first publication |
EN 60811-1-3:1995 + A1:2001 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths IEC 60811-503:2012 |
This is the first publication |
EN 60811-1-3:1995 + A1:2001 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths IEC 60811-504:2012 |
This is the first publication |
EN 60811-1-4:1995 + A2:2001 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-505:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths IEC 60811-505:2012 |
This is the first publication |
EN 60811-1-4:1995 + A2:2001 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-506:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths IEC 60811-506:2012 |
This is the first publication |
EN 60811-1-4:1995 + A2:2001 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials IEC 60811-507:2012 |
This is the first publication |
EN 60811-2-1:1998 + A1:2001 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths IEC 60811-508:2012 |
This is the first publication |
EN 60811-3-1:1995 + A1:1996 + A2:2001 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-509:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) IEC 60811-509:2012 |
This is the first publication |
EN 60811-3-1:1995 + A1:1996 + A2:2001 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-510:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air IEC 60811-510:2012 |
This is the first publication |
EN 60811-4-2:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-511:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds IEC 60811-511:2012 |
This is the first publication |
EN 60811-4-1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-512:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature IEC 60811-512:2012 |
This is the first publication |
EN 60811-4-2:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-513:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning IEC 60811-513:2012 |
This is the first publication |
EN 60811-4-2:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-601:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds IEC 60811-601:2012 |
This is the first publication |
EN 60811-5-1:1999 + A1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-602:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds IEC 60811-602:2012 |
This is the first publication |
EN 60811-5-1:1999 + A1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-603:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds IEC 60811-603:2012 |
This is the first publication |
EN 60811-5-1:1999 + A1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds IEC 60811-604:2012 |
This is the first publication |
EN 60811-5-1:1999 + A1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-605:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds IEC 60811-605:2012 |
This is the first publication |
EN 60811-4-1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-606:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density IEC 60811-606:2012 |
This is the first publication |
EN 60811-1-3:1995 + A1:2001 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-607:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene IEC 60811-607:2012 |
This is the first publication |
EN 60811-4-1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60825-1:2007 Safety of laser products - Part 1: Equipment classification and requirements IEC 60825-1:2007 |
This is the first publication |
EN 60825-1:1994 + A11:1996 + A1:2002 + A2:2001 Note 2.1 |
1.9.2010 |
|
Cenelec |
EN 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements IEC 60825-1:2014 |
This is the first publication |
EN 60825-1:2007 Note 2.1 |
|
|
Cenelec |
EN 60825-2:2004 Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) IEC 60825-2:2004 |
This is the first publication |
EN 60825-2:2000 Note 2.1 |
|
|
|
EN 60825-2:2004/A1:2007 IEC 60825-2:2004/A1:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 60825-2:2004/A2:2010 IEC 60825-2:2004/A2:2010 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60825-4:2006 Safety of laser products - Part 4: Laser guards IEC 60825-4:2006 |
This is the first publication |
EN 60825-4:1997 + A1:2002 + A2:2003 Note 2.1 |
|
|
|
EN 60825-4:2006/A1:2008 IEC 60825-4:2006/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60825-4:2006/A2:2011 IEC 60825-4:2006/A2:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60825-12:2004 Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information IEC 60825-12:2004 |
This is the first publication |
|
|
|
Cenelec |
EN 60831-1:1996 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation IEC 60831-1:1996 |
This is the first publication |
EN 60831-1:1993 Note 2.1 |
|
|
|
EN 60831-1:1996/A1:2003 IEC 60831-1:1996/A1:2002 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60831-1:2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation IEC 60831-1:2014 |
This is the first publication |
EN 60831-1:1996 + A1:2003 Note 2.1 |
18.3.2017 |
|
|
EN 60831-1:2014/AC:2014 |
This is the first publication |
|
|
|
Cenelec |
EN 60831-2:1996 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test, self-healing test and destruction test IEC 60831-2:1995 |
This is the first publication |
EN 60831-2:1993 Note 2.1 |
|
|
Cenelec |
EN 60831-2:2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2: Ageing test, self-healing test and destruction test IEC 60831-2:2014 |
This is the first publication |
EN 60831-2:1996 Note 2.1 |
19.3.2017 |
|
Cenelec |
EN 60838-1:2004 Miscellaneous lampholders - Part 1: General requirements and tests IEC 60838-1:2004 |
This is the first publication |
EN 60838-1:1998 + A1:1999 + A2:2002 Note 2.1 |
|
|
|
EN 60838-1:2004/A1:2008 IEC 60838-1:2004/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 60838-1:2004/A2:2011 IEC 60838-1:2004/A2:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60838-2-1:1996 Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 IEC 60838-2-1:1994 |
This is the first publication |
|
|
|
|
EN 60838-2-1:1996/A1:1998 IEC 60838-2-1:1994/A1:1998 |
This is the first publication |
Note 3 |
|
|
|
EN 60838-2-1:1996/A2:2004 2-1:1994/A2:2004 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60838-2-2:2006 Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules IEC 60838-2-2:2006 |
This is the first publication |
|
|
|
|
EN 60838-2-2:2006/A1:2012 IEC 60838-2-2:2006/A1:2012 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60898-1:2003 Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation IEC 60898-1:2002 (Modified) |
This is the first publication |
EN 60898:1991 + A11:1994 + A12:1995 + A13:1995 + A14:1995 + A15:1995 + A16:1996 + A17:1998 + A18:1998 + A19:2000 + A1:1991 Note 2.1 |
|
|
|
EN 60898-1:2003/A1:2004 IEC 60898-1:2002/A1:2002 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60898-1:2003/A11:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60898-1:2003/A13:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60898-1:2003/AC:2004 |
This is the first publication |
|
|
|
Cenelec |
EN 60898-2:2006 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation IEC 60898-2:2000 (Modified) + A1:2003 (Modified) |
This is the first publication |
EN 60898-2:2001 Note 2.1 |
|
|
Cenelec |
EN 60931-1:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation IEC 60931-1:1996 |
This is the first publication |
EN 60931-1:1993 Note 2.1 |
|
|
|
EN 60931-1:1996/A1:2003 IEC 60931-1:1996/A1:2002 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60931-2:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test and destruction test IEC 60931-2:1995 |
This is the first publication |
EN 60931-2:1993 Note 2.1 |
|
|
Cenelec |
EN 60931-3:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 3: Internal fuses IEC 60931-3:1996 |
This is the first publication |
|
|
|
Cenelec |
EN 60934:2001 Circuit-breakers for equipment (CBE) IEC 60934:2000 |
This is the first publication |
EN 60934:1994 + A11:1998 + A1:1994 + A2:1997 Note 2.1 |
|
|
|
EN 60934:2001/A1:2007 IEC 60934:2000/A1:2007 |
This is the first publication |
Note 3 |
|
|
|
EN 60934:2001/A2:2013 IEC 60934:2000/A2:2013 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60947-1:2007 Low-voltage switchgear and controlgear - Part 1: General rules IEC 60947-1:2007 |
This is the first publication |
EN 60947-1:2004 Note 2.1 |
|
|
|
EN 60947-1:2007/A1:2011 IEC 60947-1:2007/A1:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 60947-1:2007/A2:2014 IEC 60947-1:2007/A2:2014 |
This is the first publication |
Note 3 |
14.10.2017 |
|
Cenelec |
EN 60947-2:2006 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers IEC 60947-2:2006 |
This is the first publication |
EN 60947-2:2003 Note 2.1 |
|
|
|
EN 60947-2:2006/A1:2009 IEC 60947-2:2006/A1:2009 |
This is the first publication |
Note 3 |
|
|
|
EN 60947-2:2006/A2:2013 IEC 60947-2:2006/A2:2013 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60947-3:2009 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units IEC 60947-3:2008 |
This is the first publication |
EN 60947-3:1999 + A1:2001 + A2:2005 Note 2.1 |
|
|
|
EN 60947-3:2009/A1:2012 IEC 60947-3:2008/A1:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 60947-3:2009/A2:2015 IEC 60947-3:2008/A2:2015 |
This is the first publication |
Note 3 |
31.8.2018 |
|
Cenelec |
EN 60947-4-1:2010 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters IEC 60947-4-1:2009 |
This is the first publication |
EN 60947-4-1:2001 + A1:2002 + A2:2005 Note 2.1 |
|
|
|
EN 60947-4-1:2010/A1:2012 IEC 60947-4-1:2009/A1:2012 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60947-4-2:2012 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters IEC 60947-4-2:2011 |
This is the first publication |
EN 60947-4-2:2000 + A1:2002 + A2:2006 Note 2.1 |
|
|
Cenelec |
EN 60947-4-3:2000 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads IEC 60947-4-3:1999 |
This is the first publication |
HD 419.2 S1:1987 Note 2.1 |
|
|
|
EN 60947-4-3:2000/A1:2006 IEC 60947-4-3:1999/A1:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 60947-4-3:2000/A2:2011 IEC 60947-4-3:1999/A2:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60947-4-3:2014 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads IEC 60947-4-3:2014 |
This is the first publication |
EN 60947-4-3:2000 + A1:2006 + A2:2011 Note 2.1 |
11.6.2017 |
|
Cenelec |
EN 60947-5-1:2004 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices IEC 60947-5-1:2003 |
This is the first publication |
EN 60947-5-1:1997 + A12:1999 + A1:1999 + A2:2000 Note 2.1 |
|
|
|
EN 60947-5-1:2004/A1:2009 IEC 60947-5-1:2003/A1:2009 |
This is the first publication |
Note 3 |
|
|
|
EN 60947-5-1:2004/AC:2004 |
This is the first publication |
|
|
|
|
EN 60947-5-1:2004/AC:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 60947-5-2:2007 Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches IEC 60947-5-2:2007 |
This is the first publication |
EN 60947-5-2:1998 + A1:1999 + A2:2004 Note 2.1 |
|
|
|
EN 60947-5-2:2007/A1:2012 IEC 60947-5-2:2007/A1:2012 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60947-5-3:1999 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) IEC 60947-5-3:1999 |
This is the first publication |
|
|
|
|
EN 60947-5-3:1999/A1:2005 IEC 60947-5-3:1999/A1:2005 |
This is the first publication |
Note 3 |
1.3.2008 |
|
Cenelec |
EN 60947-5-4:2003 Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests IEC 60947-5-4:2002 |
This is the first publication |
EN 60947-5-4:1997 Note 2.1 |
|
|
Cenelec |
EN 60947-5-5:1997 Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function IEC 60947-5-5:1997 |
This is the first publication |
|
|
|
|
EN 60947-5-5:1997/A1:2005 IEC 60947-5-5:1997/A1:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 60947-5-5:1997/A11:2013 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60947-5-7:2003 Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output IEC 60947-5-7:2003 |
This is the first publication |
EN 50319:1999 Note 2.1 |
|
|
Cenelec |
EN 60947-5-8:2006 Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches IEC 60947-5-8:2006 |
This is the first publication |
|
|
|
Cenelec |
EN 60947-5-9:2007 Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches IEC 60947-5-9:2006 |
This is the first publication |
|
|
|
Cenelec |
EN 60947-6-1:2005 Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment IEC 60947-6-1:2005 |
This is the first publication |
EN 60947-6-1:1991 + A11:1997 + A1:1994 + A2:1997 Note 2.1 |
|
|
|
EN 60947-6-1:2005/A1:2014 IEC 60947-6-1:2005/A1:2013 |
This is the first publication |
Note 3 |
17.1.2017 |
|
Cenelec |
EN 60947-6-2:2003 Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) IEC 60947-6-2:2002 |
This is the first publication |
EN 60947-6-2:1993 + A11:1997 + A1:1997 + A2:1999 Note 2.1 |
|
|
|
EN 60947-6-2:2003/A1:2007 IEC 60947-6-2:2002/A1:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors IEC 60947-7-1:2009 |
This is the first publication |
EN 60947-7-1:2002 Note 2.1 |
|
|
Cenelec |
EN 60947-7-2:2009 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors IEC 60947-7-2:2009 |
This is the first publication |
EN 60947-7-2:2002 Note 2.1 |
|
|
Cenelec |
EN 60947-7-3:2009 Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks IEC 60947-7-3:2009 |
This is the first publication |
EN 60947-7-3:2002 Note 2.1 |
|
|
Cenelec |
EN 60947-8:2003 Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines IEC 60947-8:2003 |
This is the first publication |
|
|
|
|
EN 60947-8:2003/A1:2006 IEC 60947-8:2003/A1:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 60947-8:2003/A2:2012 IEC 60947-8:2003/A2:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 60950-1:2006 Information technology equipment - Safety - Part 1: General requirements IEC 60950-1:2005 (Modified) |
This is the first publication |
EN 60950-1:2001 + A11:2004 Note 2.1 |
|
|
|
EN 60950-1:2006/AC:2011 |
This is the first publication |
|
|
|
|
EN 60950-1:2006/A11:2009 |
This is the first publication |
Note 3 |
|
|
|
EN 60950-1:2006/A12:2011 |
This is the first publication |
Note 3 |
|
|
|
EN 60950-1:2006/A1:2010 IEC 60950-1:2005/A1:2009 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 60950-1:2006/A2:2013 IEC 60950-1:2005/A2:2013 (Modified) |
This is the first publication |
Note 3 |
2.7.2016 |
|
Cenelec |
EN 60950-21:2003 Information technology equipment - Safety - Part 21: Remote power feeding IEC 60950-21:2002 |
This is the first publication |
|
|
|
Cenelec |
EN 60950-22:2006 Information technology equipment - Safety - Part 22: Equipment installed outdoors IEC 60950-22:2005 (Modified) |
This is the first publication |
|
|
|
|
EN 60950-22:2006/AC:2008 |
This is the first publication |
|
|
|
Cenelec |
EN 60950-23:2006 Information technology equipment - Safety - Part 23: Large data storage equipment IEC 60950-23:2005 |
This is the first publication |
|
|
|
|
EN 60950-23:2006/AC:2008 |
This is the first publication |
|
|
|
Cenelec |
EN 60968:2013 Self-ballasted lamps for general lighting services - Safety requirements IEC 60968:2012 |
This is the first publication |
EN 60968:1990 + A1:1993 + A2:1999 Note 2.1 |
|
|
|
EN 60968:2013/A11:2014 |
This is the first publication |
Note 3 |
9.12.2016 |
|
Cenelec |
EN 60968:2015 Self-ballasted fluorescent lamps for general lighting services - Safety requirements IEC 60968:2015 (Modified) IEC 60968:2015/COR1:2015 (Modified) |
This is the first publication |
EN 60968:2013 + A11:2014 Note 2.1 |
30.3.2018 |
|
Cenelec |
EN 60974-1:2012 Arc welding equipment - Part 1: Welding power sources IEC 60974-1:2012 |
This is the first publication |
EN 60974-1:2005 Note 2.1 |
|
|
Cenelec |
EN 60974-2:2008 Arc welding equipment - Part 2: Liquid cooling systems IEC 60974-2:2007 |
This is the first publication |
EN 60974-2:2003 Note 2.1 |
1.2.2011 |
|
Cenelec |
EN 60974-2:2013 Arc welding equipment - Part 2: Liquid cooling systems IEC 60974-2:2013 |
This is the first publication |
EN 60974-2:2008 Note 2.1 |
|
|
Cenelec |
EN 60974-3:2007 Arc welding equipment - Part 3: Arc striking and stabilizing devices IEC 60974-3:2007 |
This is the first publication |
EN 60974-3:2003 Note 2.1 |
|
|
Cenelec |
EN 60974-3:2014 Arc welding equipment - Part 3: Arc striking and stabilizing devices IEC 60974-3:2013 |
This is the first publication |
EN 60974-3:2007 Note 2.1 |
31.12.2016 |
|
Cenelec |
EN 60974-5:2008 Arc welding equipment - Part 5: Wire feeders IEC 60974-5:2007 |
This is the first publication |
EN 60974-5:2002 Note 2.1 |
|
|
Cenelec |
EN 60974-5:2013 Arc welding equipment - Part 5: Wire feeders IEC 60974-5:2013 |
This is the first publication |
EN 60974-5:2008 Note 2.1 |
27.6.2016 |
|
Cenelec |
EN 60974-6:2011 Arc welding equipment - Part 6: Limited duty equipment IEC 60974-6:2010 |
This is the first publication |
EN 60974-6:2003 Note 2.1 |
|
|
Cenelec |
EN 60974-6:2016 Arc welding equipment - Part 6: Limited duty equipment IEC 60974-6:2015 |
This is the first publication |
|
27.10.2018 |
|
Cenelec |
EN 60974-7:2005 Arc welding equipment - Part 7: Torches IEC 60974-7:2005 |
This is the first publication |
EN 60974-7:2000 Note 2.1 |
1.8.2008 |
|
Cenelec |
EN 60974-7:2013 Arc welding equipment - Part 7: Torches IEC 60974-7:2013 |
This is the first publication |
EN 60974-7:2005 Note 2.1 |
|
|
Cenelec |
EN 60974-8:2009 Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems IEC 60974-8:2009 |
This is the first publication |
EN 60974-8:2004 Note 2.1 |
|
|
Cenelec |
EN 60974-11:2010 Arc welding equipment - Part 11: Electrode holders IEC 60974-11:2010 |
This is the first publication |
EN 60974-11:2004 Note 2.1 |
|
|
Cenelec |
EN 60974-12:2011 Arc welding equipment - Part 12: Coupling devices for welding cables IEC 60974-12:2011 |
This is the first publication |
EN 60974-12:2005 Note 2.1 |
|
|
Cenelec |
EN 60974-13:2011 Arc welding equipment - Part 13: Welding clamp IEC 60974-13:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 60998-1:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements IEC 60998-1:2002 (Modified) |
This is the first publication |
EN 60998-1:1993 + A1:2001 Note 2.1 |
|
|
Cenelec |
EN 60998-2-1:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units IEC 60998-2-1:2002 (Modified) |
This is the first publication |
EN 60998-2-1:1993 Note 2.1 |
|
|
Cenelec |
EN 60998-2-2:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units IEC 60998-2-2:2002 (Modified) |
This is the first publication |
EN 60998-2-2:1993 Note 2.1 |
|
|
Cenelec |
EN 60998-2-3:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units IEC 60998-2-3:2002 (Modified) |
This is the first publication |
EN 60998-2-3:1993 Note 2.1 |
|
|
Cenelec |
EN 60998-2-4:2005 Connecting devices for low voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices IEC 60998-2-4:2004 (Modified) |
This is the first publication |
EN 60998-2-4:1993 Note 2.1 |
|
|
Cenelec |
EN 60999-1:2000 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) IEC 60999-1:1999 |
This is the first publication |
EN 60999-1:1993 Note 2.1 |
|
|
Cenelec |
EN 60999-2:2003 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) IEC 60999-2:2003 |
This is the first publication |
|
|
|
Cenelec |
EN 61008-1:2004 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules IEC 61008-1:1996 (Modified) + A1:2002 (Modified) |
This is the first publication |
EN 61008-1:1994 + A11:1995 + A12:1998 + A13:1998 + A14:1998 + A17:2000 + A2:1995 Note 2.1 |
|
|
|
EN 61008-1:2004/A11:2007 |
This is the first publication |
Note 3 |
|
|
|
EN 61008-1:2004/A12:2009 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61008-1:2012 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules IEC 61008-1:2010 (Modified) |
This is the first publication |
EN 61008-1:2004 + A11:2007 + A12:2009 Note 2.1 |
18.6.2017 |
|
|
EN 61008-1:2012/A1:2014 IEC 61008-1:2010/A1:2012 (Modified) |
This is the first publication |
Note 3 |
4.8.2017 |
|
|
EN 61008-1:2012/A11:2015 |
This is the first publication |
Note 3 |
6.7.2018 |
|
|
EN 61008-1:2012/A2:2014 IEC 61008-1:2010/A2:2013 (Modified) |
This is the first publication |
Note 3 |
4.8.2017 |
|
Cenelec |
EN 61008-2-1:1994 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage IEC 61008-2-1:1990 |
This is the first publication |
|
|
|
|
EN 61008-2-1:1994/A11:1998 |
This is the first publication |
Note 3 |
|
|
|
EN 61008-2-1:1994/A11:1998/AC:1999 |
This is the first publication |
|
|
|
Cenelec |
EN 61009-1:2004 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules IEC 61009-1:1996 (Modified) + A1:2002 (Modified) |
This is the first publication |
EN 61009-1:1994 + A11:1995 + A13:1998 + A14:1998 + A15:1998 + A19:2000 + A1:1995 + A2:1998 Note 2.1 |
|
|
|
EN 61009-1:2004/A11:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 61009-1:2004/A13:2009 |
This is the first publication |
Note 3 |
|
|
|
EN 61009-1:2004/A12:2009 |
This is the first publication |
Note 3 |
|
|
|
EN 61009-1:2004/AC:2006 |
This is the first publication |
|
|
|
Cenelec |
EN 61009-1:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules IEC 61009-1:2010 (Modified) |
This is the first publication |
EN 61009-1:2004 + A11:2008 + A12:2009 + A13:2009 Note 2.1 |
18.6.2017 |
|
|
EN 61009-1:2012/A1:2014 IEC 61009-1:2010/A1:2012 (Modified) |
This is the first publication |
Note 3 |
4.8.2017 |
|
|
EN 61009-1:2012/A11:2015 |
This is the first publication |
Note 3 |
6.7.2018 |
|
|
EN 61009-1:2012/A2:2014 IEC 61009-1:2010/A2:2013 (Modified) |
This is the first publication |
Note 3 |
4.8.2017 |
|
Cenelec |
EN 61009-2-1:1994 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage IEC 61009-2-1:1991 |
This is the first publication |
|
|
|
|
EN 61009-2-1:1994/A11:1998 |
This is the first publication |
Note 3 |
|
|
|
EN 61009-2-1:1994/A11:1998/AC:1999 |
This is the first publication |
|
|
|
Cenelec |
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements IEC 61 IEC 61010-1:2010 |
This is the first publication |
EN 61010-1:2001 Note 2.1 |
|
|
Cenelec |
EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of material IEC 61010-2-010:2003 |
This is the first publication |
EN 61010-2-010:1994 + A1:1996 Note 2.1 |
1.10.2006 |
|
Cenelec |
EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials IEC 61010-2-010:2014 |
This is the first publication |
EN 61010-2-010:2003 Note 2.1 |
|
|
Cenelec |
EN 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges IEC 61010-2-020:2006 |
This is the first publication |
EN 61010-2-020:1994 + A1:1996 Note 2.1 |
1.7.2009 |
|
Cenelec |
EN 61010-2-030:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits IEC 61010- IEC 61010-2-030:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 61010-2-032:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement IEC 61010-2-032:2012 |
This is the first publication |
EN 61010-2-032:2002 Note 2.1 |
|
|
Cenelec |
EN 61010-2-033:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage IEC 61010-2-033:2012 |
This is the first publication |
|
|
|
Cenelec |
EN 61010-2-040:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials IEC 61010-2-040:2005 |
This is the first publication |
EN 61010-2-041:1996 EN 61010-2-042:1997 EN 61010-2-043:1997 EN 61010-2-045:2000 Note 2.1 |
1.6.2008 |
|
Cenelec |
EN 61010-2-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring IEC 61010-2-051:2003 |
This is the first publication |
EN 61010-2-051:1995 Note 2.1 |
1.10.2006 |
|
Cenelec |
EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring IEC 61010-2-051:2015 |
This is the first publication |
EN 61010-2-051:2003 Note 2.1 |
|
|
Cenelec |
EN 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization IEC 61010-2-061:2003 |
This is the first publication |
EN 61010-2-061:1996 Note 2.1 |
1.10.2006 |
|
Cenelec |
EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization IEC 61010-2-061:2015 |
This is the first publication |
EN 61010-2-061:2003 Note 2.1 |
|
|
Cenelec |
EN 61010-2-081:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes IEC 61010-2-081:2001 |
This is the first publication |
|
|
|
|
EN 61010-2-081:2002/A1:2003 IEC 61010-2-081:2001/A1:2003 |
This is the first publication |
Note 3 |
1.10.2006 |
|
Cenelec |
EN 61010-2-081:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes IEC 61010-2-081:2015 |
This is the first publication |
EN 61010-2-081:2002 + A1:2003 Note 2.1 |
|
|
Cenelec |
EN 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems IEC 61010-2-091:2012 |
This is the first publication |
|
|
|
|
EN 61010-2-091:2012/AC:2013 |
This is the first publication |
|
|
|
Cenelec |
EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment IEC 61010-2-201:2013 |
This is the first publication |
|
|
|
|
EN 61010-2-201:2013/AC:2013 |
This is the first publication |
|
|
|
Cenelec |
EN 61010-031:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test IEC 61010-031:2002 |
This is the first publication |
EN 61010-2-031:1994 Note 2.1 |
1.2.2005 |
|
|
EN 61010-031:2002/A1:2008 IEC 61010-031:2002/A1:2008 |
This is the first publication |
Note 3 |
1.3.2011 |
|
Cenelec |
EN 61010-031:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test IEC 61010-031:2015 |
This is the first publication |
EN 61010-031:2002 + A1:2008 Note 2.1 |
|
|
Cenelec |
EN 61028:1993 Electrical measuring instruments - X-Y recorders IEC 61028:1991 |
This is the first publication |
|
|
|
|
EN 61028:1993/A2:1997 IEC 61028:1991/A2:1997 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61034-1:2005 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus IEC 61034-1:2005 |
This is the first publication |
EN 50268-1:1999 Note 2.1 |
1.6.2008 |
|
|
EN 61034-1:2005/A1:2014 IEC 61034-1:2005/A1:2013 |
This is the first publication |
Note 3 |
26.7.2016 |
|
Cenelec |
EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements IEC 61034-2:2005 |
This is the first publication |
EN 50268-2:1999 Note 2.1 |
1.6.2008 |
|
|
EN 61034-2:2005/A1:2013 IEC 61034-2:2005/A1:2013 |
This is the first publication |
Note 3 |
25.6.2016 |
|
Cenelec |
EN 61048:2006 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements IEC 61048:2006 |
This is the first publication |
EN 61048:1993 + A1:1996 + A2:1999 Note 2.1 |
|
|
|
EN 61048:2006/A1:2016 IEC 61048:2006/A1:2015 |
This is the first publication |
Note 3 |
19.2.2019 |
|
Cenelec |
EN 61050:1992 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (generally called neon-transformers) - General and safety requirements IEC 61050:1991 (Modified) |
This is the first publication |
|
|
|
|
EN 61050:1992/A1:1995 IEC 61050:1991/A1:1994 (Modified) |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61058-1:2002 Switches for appliances - Part 1: General requirements IEC 61058-1:2000 (Modified) + A1:2001 |
This is the first publication |
EN 61058-1:1992 + A1:1993 Note 2.1 |
|
|
|
EN 61058-1:2002/A2:2008 IEC 61058-1:2000/A2:2007 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61058-2-1:2011 Switches for appliances - Part 2-1: Particular requirements for cord switches IEC 61058-2-1:2010 |
This is the first publication |
EN 61058-2-1:1993 + A11:2002 + A1:1996 Note 2.1 |
|
|
Cenelec |
EN 61058-2-4:2005 Switches for appliances - Part 2-4: Particular requirements for independently mounted switches IEC 61058-2-4:1995 + A1:2003 |
This is the first publication |
|
|
|
Cenelec |
EN 61058-2-5:2011 Switches for appliances - Part 2-5: Particular requirements for change-over selectors IEC 61058-2-5:2010 |
This is the first publication |
EN 61058-2-5:1994 + A11:2002 Note 2.1 |
|
|
Cenelec |
EN 61071:2007 Capacitors for power electronics IEC 61071:2007 |
This is the first publication |
EN 61071-1:1996 EN 61071-2:1996 Note 2.1 |
|
|
Cenelec |
EN 61095:2009 Electromechanical contactors for household and similar purposes IEC 61095:2009 |
This is the first publication |
EN 61095:1993 + A11:1996 + A1:2000 Note 2.1 |
|
|
Cenelec |
EN 61131-2:2007 Programmable controllers - Part 2: Equipment requirements and tests IEC 61131-2:2007 |
This is the first publication |
EN 61131-2:2003 Note 2.1 |
|
|
Cenelec |
EN 61138:2007 Cables for portable earthing and short-circuiting equipment IEC 61138:2007 (Modified) |
This is the first publication |
EN 61138:1997 + A11:2003 Note 2.1 |
|
|
Cenelec |
EN 61140:2002 Protection against electric shock - Common aspects for installation and equipment IEC 61140:2001 |
This is the first publication |
|
|
|
|
EN 61140:2002/A1:2006 IEC 61140:2001/A1:2004 (Modified) |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61143-1:1994 Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements IEC 61143-1:1992 |
This is the first publication |
|
|
|
|
EN 61143-1:1994/A1:1997 IEC 61143-1:1992/A1:1997 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61143-2:1994 Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods IEC 61143-2:1992 |
This is the first publication |
|
|
|
Cenelec |
EN 61184:2008 Bayonet lampholders IEC IEC 61184:2008 |
This is the first publication |
EN 61184:1997 + A1:2001 + A2:2004 Note 2.1 |
|
|
|
EN 61184:2008/A1:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61187:1994 Electrical and electronic measuring equipment - Documentation IEC 61187:1993 (Modified) |
This is the first publication |
|
|
|
|
EN 61187:1994/AC:1995 |
This is the first publication |
|
|
|
Cenelec |
EN 61195:1999 Double-capped fluorescent lamps - Safety specifications IEC 61195:1999 |
This is the first publication |
EN 61195:1994 + A1:1998 Note 2.1 |
|
|
|
EN 61195:1999/A1:2013 IEC 61195:1999/A1:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 61195:1999/A2:2015 IEC 61195:1999/A2:2014 |
This is the first publication |
Note 3 |
24.10.2017 |
|
Cenelec |
EN 61199:2011 Single-capped fluorescent lamps - Safety specifications IEC 61199:2011 |
This is the first publication |
EN 61199:1999 Note 2.1 |
|
|
|
EN 61199:2011/A1:2013 IEC 61199:2011/A1:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 61199:2011/A2:2015 IEC 61199:2011/A2:2014 |
This is the first publication |
Note 3 |
3.9.2017 |
|
Cenelec |
EN 61204:1995 Low-voltage power supply devices, d.c. output - Performance characteristics IEC 61204:1993 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 61204-7:2006 Low voltage power supplies, d.c. output - Part 7: Safety requirements IEC 61204-7:2006 |
This is the first publication |
|
|
|
|
EN 61204-7:2006/A11:2009 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements IEC 61210:2010 (Modified) |
This is the first publication |
EN 61210:1995 Note 2.1 |
|
|
Cenelec |
EN 61230:2008 Live working - Portable equipment for earthing or earthing and short-circuiting IEC 61230:2008 |
This is the first publication |
EN 61230:1995 + A11:1999 Note 2.1 |
1.10.2011 |
|
Cenelec |
EN 61242:1997 Electrical accessories - Cable reels for household and similar purposes IEC 61242:1995 (Modified) |
This is the first publication |
|
|
|
|
EN 61242:1997/A1:2008 IEC 61242:1995/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 61242:1997/A2:2016 IEC 61242:1995/A2:2015 |
This is the first publication |
Note 3 |
3.12.2018 |
|
|
EN 61242:1997/A1:2008/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 61243-3:2010 Live working - Voltage detectors - Part 3: Two-pole low-voltage type IEC 61243-3:2009 |
This is the first publication |
EN 61243-3:1998 Note 2.1 |
|
|
Cenelec |
EN 61243-3:2014 Live working - Voltage detectors - Part 3: Two-pole low-voltage type IEC 61243-3:2014 |
This is the first publication |
EN 61243-3:2010 Note 2.1 |
13.11.2017 |
|
|
EN 61243-3:2014/AC:2015 |
This is the first publication |
|
|
|
|
EN 61243-3:2014/AC:2015 |
This is the first publication |
|
|
|
Cenelec |
EN 61270-1:1996 Capacitors for microwave ovens - Part 1: General IEC 61270-1:1996 |
This is the first publication |
|
|
|
Cenelec |
EN 61293:1994 Marking of electrical equipment with ratings related to electrical supply - Safety requirements IEC 61293:1994 |
This is the first publication |
|
|
|
Cenelec |
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals IEC 61310-1:2007 |
This is the first publication |
EN 61310-1:1995 Note 2.1 |
|
|
Cenelec |
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking IEC 61310-2:2007 |
This is the first publication |
EN 61310-2:1995 Note 2.1 |
|
|
Cenelec |
EN 61310-3:2008 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators IEC 61310-3:2007 |
This is the first publication |
EN 61310-3:1999 Note 2.1 |
|
|
Cenelec |
EN 61316:1999 Industrial cable reels IEC 61316:1999 |
This is the first publication |
|
|
|
Cenelec |
EN 61347-1:2008 Lamp controlgear - Part 1: General and safety requirements IEC 61347-1:2007 (Modified) |
This is the first publication |
EN 61347-1:2001 + A1:2008 Note 2.1 |
|
|
|
EN 61347-1:2008/A1:2011 IEC 61347-1:2007/A1:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 61347-1:2008/A2:2013 IEC 61347-1:2007/A2:2012 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61347-1:2015 Lamp controlgear - Part 1: General and safety requirements IEC 61347-1:2015 |
This is the first publication |
EN 61347-1:2008 + A1:2011 + A2:2013 Note 2.1 |
26.3.2018 |
|
Cenelec |
EN 61347-2-2:2012 Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps IEC 61347-2-2:2011 |
This is the first publication |
EN 61347-2-2:2001 + A1:2006 + A2:2006 Note 2.1 |
|
|
Cenelec |
EN 61347-2-3:2011 Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps IEC 6134 IEC 61347-2-3:2011 |
This is the first publication |
EN 61347-2-3:2001 + A1:2004 + A2:2006 EN 61347-2-4:2001 Note 2.1 |
|
|
|
EN 61347-2-3:2011/AC:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 61347-2-7:2012 Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) IEC 61347-2-7:2011 |
This is the first publication |
EN 61347-2-7:2006 Note 2.1 |
|
|
Cenelec |
EN 61347-2-8:2001 Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps IEC 61347-2-8:2000 |
This is the first publication |
EN 60920:1991 + A11:2000 + A1:1993 + A2:1996 Note 2.1 |
|
|
|
EN 61347-2-8:2001/A1:2006 2-8:2000/A1:2006 |
This is the first publication |
Note 3 |
|
|
|
EN 61347-2-8:2001/AC:2003 |
This is the first publication |
|
|
|
|
EN 61347-2-8:2001/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 61347-2-9:2013 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) IEC 61347-2-9:2012 |
This is the first publication |
EN 61347-2-9:2001 + A1:2003 + A2:2006 Note 2.1 |
|
|
Cenelec |
EN 61347-2-10:2001 Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) IEC 61347-2-10:2000 |
This is the first publication |
|
|
|
|
EN 61347-2-10:2001/A1:2009 IEC 61347-2-10:2000/A1:2008 |
This is the first publication |
Note 3 |
|
|
|
EN 61347-2-10:2001/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 61347-2-11:2001 Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires IEC 61347-2-11:2001 |
This is the first publication |
|
|
|
|
EN 61347-2-11:2001/AC:2002 |
This is the first publication |
|
|
|
|
EN 61347-2-11:2001/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 61347-2-12:2005 Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) IEC 61347-2-12:2005 |
This is the first publication |
|
|
|
|
EN 61347-2-12:2005/A1:2010 IEC 61347-2-12:2005/A1:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 61347-2-12:2005/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 61347-2-13:2006 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules IEC 61347-2-13:2006 |
This is the first publication |
|
|
|
|
EN 61347-2-13:2006/AC:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 61347-2-13:2014 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules IEC 61347-2-13:2014 |
This is the first publication |
EN 61347-2-13:2006 Note 2.1 |
8.10.2017 |
|
Cenelec |
EN 61386-1:2008 Conduit systems for cable management - Part 1: General requirements IEC 61386-1:2008 |
This is the first publication |
EN 61386-1:2004 Note 2.1 |
|
|
Cenelec |
EN 61386-21:2004 Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems IEC 61386-21:2002 |
This is the first publication |
EN 50086-2-1:1995 + A11:1998 Note 2.1 |
|
|
|
EN 61386-21:2004/A11:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 61386-21:2004/AC:2004 |
This is the first publication |
|
|
|
Cenelec |
EN 61386-22:2004 Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systems IEC 61386-22:2002 |
This is the first publication |
EN 50086-2-2:1995 + A11:1998 Note 2.1 |
|
|
|
EN 61386-22:2004/A11:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 61386-22:2004/AC:2004 |
This is the first publication |
|
|
|
Cenelec |
EN 61386-23:2004 Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems IEC 61386-23:2002 |
This is the first publication |
EN 50086-2-3:1995 + A11:1998 Note 2.1 |
|
|
|
EN 61386-23:2004/A11:2010 |
This is the first publication |
Note 3 |
|
|
|
EN 61386-23:2004/AC:2004 |
This is the first publication |
|
|
|
Cenelec |
EN 61386-24:2010 Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground IEC 61386-24:2004 |
This is the first publication |
EN 50086-2-4:1994 + A1:2001 Note 2.1 |
|
|
Cenelec |
EN 61386-25:2011 Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices IEC 61386-25:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules IEC 61439-1:2011 |
This is the first publication |
EN 61439-1:2009 Note 2.1 |
|
|
Cenelec |
EN 61439-2:2011 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies IEC 61439-2:2011 |
This is the first publication |
EN 61439-2:2009 Note 2.1 |
|
|
Cenelec |
EN 61439-3:2012 Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO) IEC 61439-3:2012 |
This is the first publication |
EN 60439-3:1991 + A1:1994 + A2:2001 Note 2.1 |
|
|
Cenelec |
EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) IEC 61439-4:2012 |
This is the first publication |
EN 60439-4:2004 Note 2.1 |
|
|
Cenelec |
EN 61439-5:2011 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks IEC 61439-5:2010 |
This is the first publication |
EN 60439-5:2006 Note 2.1 |
3.1.2016 |
|
Cenelec |
EN 61439-5:2015 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks IEC 61439-5:2014 |
This is the first publication |
EN 61439-5:2011 Note 2.1 |
|
|
|
EN 61439-5:2015/AC:2015 |
This is the first publication |
|
|
|
Cenelec |
EN 61439-6:2012 Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways) IEC 61439-6:2012 |
This is the first publication |
EN 60439-2:2000 + A1:2005 Note 2.1 |
|
|
Cenelec |
EN 61534-1:2011 Powertrack systems - Part 1: General requirements IEC 61 IEC 61534-1:2011 |
This is the first publication |
EN 61534-1:2003 Note 2.1 |
|
|
|
EN 61534-1:2011/A1:2014 IEC 61534-1:2011/A1:2014 |
This is the first publication |
Note 3 |
4.8.2017 |
|
Cenelec |
EN 61534-21:2006 Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting IEC 61534-21:2006 |
This is the first publication |
|
|
|
Cenelec |
EN 61534-21:2014 Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting IEC 61534-21:2014 |
This is the first publication |
EN 61534-21:2006 Note 2.1 |
24.7.2017 |
|
Cenelec |
EN 61534-22:2009 Powertrack systems - Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation IEC 61534-22:2009 |
This is the first publication |
|
|
|
Cenelec |
EN 61534-22:2014 Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation IEC 61534-22:2014 |
This is the first publication |
EN 61534-22:2009 Note 2.1 |
24.7.2017 |
|
Cenelec |
EN 61535:2009 Installation couplers intended for permanent connection in fixed installations IEC 61535:2009 (Modified) |
This is the first publication |
|
|
|
|
EN 61535:2009/A1:2013 IEC 61535:2009/A1:2012 |
This is the first publication |
Note 3 |
20.6.2015 |
|
Cenelec |
EN 61537:2007 Cable management - Cable tray systems and cable ladder systems IEC 61537:2006 |
This is the first publication |
EN 61537:2001 Note 2.1 |
|
|
Cenelec |
EN 61549:2003 Miscellaneous lamps IEC 61549:2003 |
This is the first publication |
EN 61549:1996 + A1:1997 + A2:2001 Note 2.1 |
|
|
|
EN 61549:2003/A3:2012 IEC 61549:2003/A3:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 61549:2003/A1:2005 IEC 61549:2003/A1:2005 |
This is the first publication |
Note 3 |
|
|
|
EN 61549:2003/A2:2010 IEC 61549:2003/A2:2010 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61557-1:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements IEC 61557-1:2007 |
This is the first publication |
EN 61557-1:1997 Note 2.1 |
|
|
Cenelec |
EN 61557-2:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance IEC 61557-2:2007 |
This is the first publication |
EN 61557-2:1997 Note 2.1 |
|
|
Cenelec |
EN 61557-3:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance IEC 61557-3:2007 |
This is the first publication |
EN 61557-3:1997 Note 2.1 |
|
|
Cenelec |
EN 61557-4:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding IEC 61557-4:2007 |
This is the first publication |
EN 61557-4:1997 Note 2.1 |
|
|
Cenelec |
EN 61557-5:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth IEC 61557-5:2007 |
This is the first publication |
EN 61557-5:1997 Note 2.1 |
|
|
Cenelec |
EN 61557-6:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems IEC 61557-6:2007 |
This is the first publication |
EN 61557-6:1998 Note 2.1 |
|
|
Cenelec |
EN 61557-7:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence IEC 61557-7:2007 |
This is the first publication |
EN 61557-7:1997 Note 2.1 |
|
|
Cenelec |
EN 61557-8:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems IEC 61 IEC 61557-8:2007 |
This is the first publication |
EN 61557-8:1997 Note 2.1 |
|
|
Cenelec |
EN 61557-8:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems IEC 61557-8:2014 |
This is the first publication |
EN 61557-8:2007 Note 2.1 |
15.1.2018 |
|
Cenelec |
EN 61557-9:2009 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems IEC 61557-9:2009 |
This is the first publication |
EN 61557-9:1999 Note 2.1 |
|
|
Cenelec |
EN 61557-9:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems IEC 61557-9:2014 |
This is the first publication |
EN 61557-9:2009 Note 2.1 |
15.1.2018 |
|
Cenelec |
EN 61557-10:2001 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures IEC 61557-10:2000 |
This is the first publication |
|
|
|
Cenelec |
EN 61557-10:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures IEC 61557-10:2013 |
This is the first publication |
EN 61557-10:2001 Note 2.1 |
3.6.2016 |
|
Cenelec |
EN 61557-11:2009 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems IEC 61557-11:2009 |
This is the first publication |
|
|
|
Cenelec |
EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) IEC 61557-12:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 61557-13:2011 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems IEC 61557-13:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery IEC 61557-14:2013 |
This is the first publication |
|
|
|
Cenelec |
EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems IEC 61557-15:2014 |
This is the first publication |
|
|
|
Cenelec |
EN 61557-16:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment IEC 61557-16:2014 |
This is the first publication |
|
|
|
Cenelec |
EN 61558-1:1997 Safety of power transformers, power supply units and similar - Part 1: General requirements and tests IEC 61558-1:1997 (Modified) |
This is the first publication |
EN 60742:1995 Note 2.1 |
1.12.2005 |
|
|
EN 61558-1:1997/A1:1998 IEC 61558-1:1997/A1:1998 |
This is the first publication |
Note 3 |
1.1.2001 |
|
|
EN 61558-1:1997/A11:2003 |
This is the first publication |
Note 3 |
1.12.2005 |
|
|
EN 61558-1:1997/AC:2003 |
This is the first publication |
|
|
|
Cenelec |
EN 61558-1:2005 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests IEC 61558-1:2005 |
This is the first publication |
EN 61558-1:1997 + A11:2003 + A1:1998 Note 2.1 |
|
|
|
EN 61558-1:2005/A1:2009 IEC 61558-1:2005/A1:2009 |
This is the first publication |
Note 3 |
|
|
|
EN 61558-1:2005/AC:2006 |
This is the first publication |
|
|
|
Cenelec |
EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications IEC 61558-2-1:2007 |
This is the first publication |
EN 61558-2-1:1997 Note 2.1 |
|
|
Cenelec |
EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers IEC 61558-2-2:2007 |
This is the first publication |
EN 61558-2-2:1998 Note 2.1 |
|
|
Cenelec |
EN 61558-2-3:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners IEC 61558-2-3:2010 |
This is the first publication |
EN 61558-2-3:2000 Note 2.1 |
|
|
Cenelec |
EN 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers IEC 61558-2-4:2009 |
This is the first publication |
EN 61558-2-4:1997 Note 2.1 |
|
|
Cenelec |
EN 61558-2-5:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units IEC 61558-2-5:2010 |
This is the first publication |
EN 61558-2-5:1998 + A11:2004 Note 2.1 |
|
|
Cenelec |
EN 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers IEC 61558-2-6:2009 |
This is the first publication |
EN 61558-2-6:1997 Note 2.1 |
|
|
Cenelec |
EN 61558-2-7:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys IEC 61558-2-7:2007 (Modified) |
This is the first publication |
EN 61558-2-7:1997 + A11:2002 Note 2.1 |
|
|
Cenelec |
EN 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes IEC 61558-2-8:2010 |
This is the first publication |
EN 61558-2-8:1998 Note 2.1 |
|
|
Cenelec |
EN 61558-2-9:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps IEC 61558-2-9:2010 |
This is the first publication |
EN 61558-2-9:2003 Note 2.1 |
|
|
Cenelec |
EN 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage IEC 61558-2-12:2011 |
This is the first publication |
EN 61558-2-12:2001 Note 2.1 |
|
|
Cenelec |
EN 61558-2-13:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers IEC 61558-2-13:2009 |
This is the first publication |
EN 61558-2-13:2000 Note 2.1 |
|
|
Cenelec |
EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers IEC 61558-2-14:2012 |
This is the first publication |
|
|
|
Cenelec |
EN 61558-2-15:2012 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations IEC 61558-2-15:2011 |
This is the first publication |
EN 61558-2-15:2001 Note 2.1 |
|
|
Cenelec |
EN 61558-2-16:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units IEC 61558-2-16:2009 |
This is the first publication |
EN 61558-2-17:1997 Note 2.1 |
|
|
|
EN 61558-2-16:2009/A1:2013 IEC 61558-2-16:2009/A1:2013 |
This is the first publication |
Note 3 |
16.9.2016 |
|
Cenelec |
EN 61558-2-20:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors IEC 61558-2-20:2010 |
This is the first publication |
EN 61558-2-20:2000 Note 2.1 |
|
|
Cenelec |
EN 61558-2-23:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites IEC 61558-2-23:2010 |
This is the first publication |
EN 61558-2-23:2000 Note 2.1 |
|
|
Cenelec |
EN 61558-2-26:2013 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes IEC 61558-2-26:2013 |
This is the first publication |
|
|
|
Cenelec |
EN 61643-11:2012 Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods IEC 61643-11:2011 (Modified) |
This is the first publication |
EN 61643-11:2002 + A11:2007 Note 2.1 |
|
|
Cenelec |
EN 61643-21:2001 Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods IEC 616 IEC 61643-21:2000 |
This is the first publication |
|
|
|
|
EN 61643-21:2001/A1:2009 IEC 61643-21:2000/A1:2008 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 61643-21:2001/A2:2013 IEC 61643-21:2000/A2:2012 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61730-1:2007 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction IEC 61730-1:2004 (Modified) |
This is the first publication |
|
|
|
|
EN 61730-1:2007/A1:2012 IEC 61730-1:2004/A1:2011 |
This is the first publication |
Note 3 |
|
|
|
EN 61730-1:2007/A11:2014 |
This is the first publication |
Note 3 |
13.10.2017 |
|
|
EN 61730-1:2007/A2:2013 IEC 61730-1:2004/A2:2013 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61730-2:2007 Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing IEC 61730-2:2004 (Modified) |
This is the first publication |
|
|
|
|
EN 61730-2:2007/A1:2012 IEC 61730-2:2004/A1:2011 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 61770:2009 Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets IEC 61770:2008 |
This is the first publication |
EN 61770:1999 + A1:2004 + A2:2006 Note 2.1 |
|
|
|
EN 61770:2009/AC:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 61800-5-1:2007 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy IEC 61800-5-1:2007 |
This is the first publication |
EN 61800-5-1:2003 Note 2.1 |
|
|
Cenelec |
EN 61812-1:2011 Time relays for industrial and residential use - Part 1: Requirements and tests IEC 61812-1:2011 |
This is the first publication |
EN 61812-1:1996 + A11:1999 Note 2.1 |
|
|
Cenelec |
EN 61851-1:2011 Electric vehicle conductive charging system - Part 1: General requirements IEC 61851-1:2010 |
This is the first publication |
EN 61851-1:2001 Note 2.1 |
|
|
Cenelec |
EN 61851-21:2002 Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply IEC 61851-21:2001 |
This is the first publication |
|
|
|
Cenelec |
EN 61851-22:2002 Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station IEC 61851-22:2001 |
This is the first publication |
|
|
|
Cenelec |
EN 61851-23:2014 Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station IEC 61851-23:2014 |
This is the first publication |
|
|
|
Cenelec |
EN 61851-24:2014 Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging IEC 61851-24:2014 |
This is the first publication |
|
|
|
|
EN 61851-24:2014/AC:2015 |
This is the first publication |
|
|
|
Cenelec |
EN 61869-1:2009 Instrument transformers - Part 1: General requirements IEC 61869-1:2007 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 61869-2:2012 Instrument transformers - Part 2: Additional requirements for current transformers IEC 61869-2:2012 |
This is the first publication |
|
|
|
Cenelec |
EN 61869-3:2011 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers IEC 61869-3:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 61869-4:2014 Instrument transformers - Part 4: Additional requirements for combined transformers IEC 61869-4:2013 |
This is the first publication |
|
|
|
|
EN 61869-4:2014/AC:2014 |
This is the first publication |
|
|
|
Cenelec |
EN 61869-5:2011 Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers IEC 61869-5:2011 |
This is the first publication |
|
|
|
|
EN 61869-5:2011/AC:2015 |
This is the first publication |
|
|
|
Cenelec |
EN 61914:2009 Cable cleats for electrical installations IEC 61914:2009 |
This is the first publication |
EN 50368:2003 Note 2.1 |
|
|
|
EN 61914:2009/AC:2009 |
This is the first publication |
|
|
|
Cenelec |
EN 61914:2016 Cable cleats for electrical installations IEC 61914:2015 |
This is the first publication |
EN 61914:2009 Note 2.1 |
28.12.2018 |
|
Cenelec |
EN 61921:2003 Power capacitors - Low-voltage power factor correction banks IEC 61921:2003 |
This is the first publication |
|
|
|
Cenelec |
EN 61995-1:2008 Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements IEC 61995-1:2005 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 61995-2:2009 Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL IEC 61995-2:2009 |
This is the first publication |
|
|
|
Cenelec |
EN 62020:1998 Electrical accessories - Residual current monitors for household and similar uses (RCMs) IEC 62020:1998 |
This is the first publication |
|
|
|
|
EN 62020:1998/A1:2005 IEC 62020:1998/A1:2003 (Modified) |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 62026-1:2007 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules IEC 62026-1:2007 |
This is the first publication |
|
|
|
Cenelec |
EN 62026-2:2013 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) IEC 62026-2:2008 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 62026-3:2009 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet IEC 62026-3:2008 |
This is the first publication |
|
|
|
Cenelec |
EN 62026-3:2015 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet IEC 62026-3:2014 IEC 62026-3:2014/COR1:2015 |
This is the first publication |
EN 62026-3:2009 Note 2.1 |
26.9.2017 |
|
Cenelec |
EN 62026-7:2013 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet IEC 62026-7:2010 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 62031:2008 LED modules for general lighting - Safety specifications IEC 62031:2008 |
This is the first publication |
|
|
|
|
EN 62031:2008/A1:2013 IEC 62031:2008/A1:2012 |
This is the first publication |
Note 3 |
|
|
|
EN 62031:2008/A2:2015 IEC 62031:2008/A2:2014 |
This is the first publication |
Note 3 |
24.10.2017 |
|
Cenelec |
EN 62035:2000 Discharge lamps (excluding fluorescent lamps) - Safety specifications IEC 62035:1999 (Modified) |
This is the first publication |
|
|
|
|
EN 62035:2000/A1:2003 IEC 62035:1999/A1:2003 (Modified) |
This is the first publication |
Note 3 |
|
|
|
EN 62035:2000/A2:2012 IEC 62035:1999/A2:2012 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 62035:2014 Discharge lamps (excluding fluorescent lamps) - Safety specifications IEC 62035:2014 (Modified) |
This is the first publication |
EN 62035:2000 + A1:2003 + A2:2012 Note 2.1 |
15.9.2017 |
|
Cenelec |
EN 62040-1:2008 Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS IEC 62 IEC 62040-1:2008 |
This is the first publication |
EN 62040-1-1:2003 EN 62040-1-2:2003 Note 2.1 |
|
|
|
EN 62040-1:2008/A1:2013 IEC 62040-1:2008/A1:2013 |
This is the first publication |
Note 3 |
|
|
|
EN 62040-1:2008/AC:2009 |
This is the first publication |
|
|
|
Cenelec |
EN 62080:2009 Sound signalling devices for household and similar purposes IEC 62080:2001 + A1:2008 |
This is the first publication |
|
|
|
Cenelec |
EN 62094-1:2003 Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements IEC 62094-1:2002 |
This is the first publication |
|
|
|
|
EN 62094-1:2003/A11:2003 |
This is the first publication |
Note 3 |
|
|
Cenelec |
EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems - Part 1: General requirements IEC 62109-1:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 62109-2:2011 Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters IEC 62109-2:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 62135-1:2008 Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation IEC 62135-1:2008 |
This is the first publication |
EN 50063:1989 Note 2.1 |
|
|
Cenelec |
EN 62135-1:2015 Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation IEC 62135-1:2015 |
This is the first publication |
EN 62135-1:2008 Note 2.1 |
11.6.2018 |
|
Cenelec |
EN 62196-1:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements IEC 62196-1:2011 |
This is the first publication |
EN 62196-1:2003 Note 2.1 |
|
|
|
EN 62196-1:2012/AC:2012 |
This is the first publication |
|
|
|
|
EN 62196-1:2012/A12:2014 |
This is the first publication |
Note 3 |
16.6.2017 |
|
|
EN 62196-1:2012/A11:2013 |
This is the first publication |
Note 3 |
15.10.2017 |
|
Cenelec |
EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements IEC 62196-1:2014 (Modified) |
This is the first publication |
EN 62196-1:2012 + A11:2013 + A12:2014 Note 2.1 |
6.10.2019 |
|
Cenelec |
EN 62196-2:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories IEC 62196-2:2011 |
This is the first publication |
|
|
|
|
EN 62196-2:2012/A12:2014/AC:2014 |
This is the first publication |
|
|
|
|
EN 62196-2:2012/A12:2014 |
This is the first publication |
Note 3 |
16.6.2017 |
|
|
EN 62196-2:2012/A11:2013 |
This is the first publication |
Note 3 |
15.10.2017 |
|
Cenelec |
EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers IEC 62196-3:2014 |
This is the first publication |
|
|
|
Cenelec |
EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements IEC 62208:2011 |
This is the first publication |
EN 62208:2003 Note 2.1 |
|
|
Cenelec |
EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure IEC 62233:2005 (Modified) |
This is the first publication |
EN 50366:2003 + A1:2006 + A1:2006 Note 2.1 |
|
|
|
EN 62233:2008/AC:2008 |
This is the first publication |
|
|
|
Cenelec |
EN 62253:2011 Photovoltaic pumping systems - Design qualification and performance measurements IEC 62253:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 62275:2009 Cable management systems - Cable ties for electrical installations IEC 62275:2006 (Modified) |
This is the first publication |
EN 50146:2000 Note 2.1 |
|
|
Cenelec |
EN 62275:2015 Cable management systems - Cable ties for electrical installations IEC 62275:2013 (Modified) |
This is the first publication |
EN 62275:2009 Note 2.1 |
19.1.2018 |
|
Cenelec |
EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety IEC 62282-3-100:2012 |
This is the first publication |
EN 62282-3-1:2007 Note 2.1 |
|
|
Cenelec |
EN 62282-3-300:2012 Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation IEC 62282-3-300:2012 |
This is the first publication |
EN 62282-3-3:2008 Note 2.1 |
|
|
Cenelec |
EN 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety IEC 62282-5-1:2012 |
This is the first publication |
|
|
|
Cenelec |
EN 62310-1:2005 Static transfer systems (STS) - Part 1: General and safety requirements IEC 62310-1:2005 |
This is the first publication |
|
|
|
Cenelec |
EN 62311:2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) IEC 62311:2007 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 62368-1:2014 Audio/video, information and communication technology equipment - Part 1: Safety requirements (IEC 62368-1:2014, modified) IEC 62368-1:2014 (Modified) |
This is the first publication |
EN 60065:2014 + A1:2015 + A:2014 EN 60950-1:2006 + A11:2009 + A12:2011 + A1:2010 + A2:2013 Note 2.1 |
20.6.2019 |
|
|
EN 62368-1:2014/AC:2015 |
This is the first publication |
|
|
|
|
EN 62368-1:2014/AC:2015 |
This is the first publication |
|
|
|
|
EN 62368-1:2014/AC:2015 |
This is the first publication |
|
|
|
Cenelec |
EN 62395-1:2006 Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements IEC 62395-1:2006 |
This is the first publication |
|
|
|
Cenelec |
EN 62395-1:2013 Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements IEC 62395-1:2013 |
This is the first publication |
EN 62395-1:2006 Note 2.1 |
|
|
Cenelec |
EN 62423:2009 Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs) IEC 62423:2007 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses IEC 62423:2009 (Modified) |
This is the first publication |
EN 62423:2009 Note 2.1 |
19.6.2017 |
|
Cenelec |
EN 62444:2013 Cable glands for electrical installations IEC 62444:2010 (Modified) |
This is the first publication |
EN 50262:1998 + A1:2001 + A2:2004 Note 2.1 |
|
|
Cenelec |
EN 62471:2008 Photobiological safety of lamps and lamp systems IEC 62471:2006 (Modified) |
This is the first publication |
EN 60825-1:1994 + A11:1996 + A1:2002 + A2:2001 Note 2.1 |
|
|
Cenelec |
EN 62477-1:2012 Safety requirements for power electronic converter systems and equipment - Part 1: General IEC 62477-1:2012 |
This is the first publication |
EN 50178:1997 Note 2.1 |
|
|
|
EN 62477-1:2012/A11:2014 |
This is the first publication |
Note 3 |
18.7.2017 |
|
Cenelec |
EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) IEC 62479:2010 (Modified) |
This is the first publication |
EN 50371:2002 Note 2.1 |
|
|
Cenelec |
EN 62493:2010 Assessment of lighting equipment related to human exposure to electromagnetic fields IEC 62493:2009 |
This is the first publication |
|
|
|
Cenelec |
EN 62532:2011 Fluorescent induction lamps - Safety specifications IEC 62532:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 62549:2011 Articulated systems and flexible systems for cable guiding IEC 62549:2011 |
This is the first publication |
|
|
|
Cenelec |
EN 62560:2012 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications IEC 62560:2011 (Modified) |
This is the first publication |
|
|
|
|
EN 62560:2012/A1:2015 IEC 62560:2011/A1:2015 (Modified) |
This is the first publication |
Note 3 |
4.5.2018 |
|
|
EN 62560:2012/A1:2015/AC:2015 |
This is the first publication |
|
|
|
|
EN 62560:2012/AC:2015 |
This is the first publication |
|
|
|
Cenelec |
EN 62606:2013 General requirements for arc fault detection devices IEC IEC 62606:2013 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work IEC 62626-1:2014 |
This is the first publication |
|
|
|
Cenelec |
HD 62640:2015 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses IEC 62640:2011 (Modified) |
This is the first publication |
|
|
|
Cenelec |
EN 62776:2015 Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications IEC 62776:2014 IEC 62776:2014/COR1:2015 |
This is the first publication |
|
|
|
Cenelec |
EN 62868:2015 Organic light emitting diode (OLED) panels for general lighting - Safety requirements IEC 62868:2014 |
This is the first publication |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, 1000, Brussels, Belgium. Tel.+32 25500811; fax +32 2 5500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix 17, 1000, Brussels, Belgium. Tel.+32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, 06921 Sophia Antipolis, France. Tel.+33 492944200; fax +33 493654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
|
8.7.2016 |
EN |
Official Journal of the European Union |
C 249/191 |
Commission communication in the framework of the implementation of the Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of the rail system within the Community
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2016/C 249/04)
|
ESO (1) |
Reference and title of the standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
|
CEN |
EN ISO 3381:2011 Railway applications - Acoustics - Measurement of noise inside railbound vehicles (ISO 3381:2005) |
|
|
|
CEN |
EN 12080:2007+A1:2010 Railway applications - Axleboxes - Rolling bearings |
|
|
|
CEN |
EN 12081:2007+A1:2010 Railway applications - Axleboxes - Lubricating greases |
|
|
|
CEN |
EN 12082:2007+A1:2010 Railway applications - Axleboxes - Performance testing |
|
|
|
CEN |
EN 12663-1:2010+A1:2014 Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) |
EN 12663-1:2010 Note 2.1 |
The date of this publication |
|
CEN |
EN 12663-2:2010 Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons |
|
|
|
CEN |
EN 12665:2011 Light and lighting - Basic terms and criteria for specifying lighting requirements |
|
|
|
CEN |
EN 13103:2009+A2:2012 Railway applications - Wheelsets and bogies - Non-powered axles - Design method |
EN 13103:2009+A1:2010 Note 2.1 |
31.1.2013 |
|
CEN |
EN 13104:2009+A2:2012 Railway applications - Wheelsets and bogies - Powered axles - Design method |
EN 13104:2009+A1:2010 Note 2.1 |
30.4.2013 |
|
CEN |
EN 13145:2001+A1:2011 Railway applications - Track - Wood sleepers and bearers |
|
|
|
CEN |
EN 13230-1:2009 Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
|
|
|
CEN |
EN 13230-2:2009 Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers |
|
|
|
CEN |
EN 13230-3:2009 Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
|
|
|
CEN |
EN 13230-4:2009 Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings |
|
|
|
CEN |
EN 13232-2:2003+A1:2011 Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design |
|
|
|
CEN |
EN 13232-3:2003+A1:2011 Railway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction |
|
|
|
CEN |
EN 13232-4:2005+A1:2011 Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection |
|
|
|
CEN |
EN 13232-5:2005+A1:2011 Railway applications - Track - Switches and crossings - Part 5: Switches |
|
|
|
CEN |
EN 13232-6:2005+A1:2011 Railway applications - Track - Switches and crossings - Part 6: Fixed common and obtuse crossings |
|
|
|
CEN |
EN 13232-7:2006+A1:2011 Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts |
|
|
|
CEN |
EN 13232-8:2007+A1:2011 Railway applications - Track - Switches and crossings - Part 8: Expansion devices |
|
|
|
CEN |
EN 13232-9:2006+A1:2011 Railway applications - Track - Switches and crossings - Part 9: Layouts |
|
|
|
CEN |
EN 13260:2009+A1:2010 Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
|
|
|
CEN |
EN 13261:2009+A1:2010 Railway applications - Wheelsets and bogies - Axles - Product requirements |
|
|
|
CEN |
EN 13262:2004+A2:2011 Railway applications - Wheelsets and bogies - Wheels - Product requirements |
|
|
|
CEN |
EN 13272:2012 Railway applications - Electrical lighting for rolling stock in public transport systems |
|
|
|
CEN |
EN 13481-2:2012 Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers |
|
|
|
|
EN 13481-2:2012/AC:2014 |
|
|
|
CEN |
EN 13481-3:2012 Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers |
|
|
|
CEN |
EN 13481-5:2012 Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel |
|
|
|
CEN |
EN 13481-7:2012 Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails |
|
|
|
CEN |
EN 13674-1:2011 Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
|
|
|
CEN |
EN 13674-2:2006+A1:2010 Railway applications - Track - Rail - Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above |
|
|
|
CEN |
EN 13674-3:2006+A1:2010 Railway applications - Track - Rail - Part 3: Check rails |
|
|
|
CEN |
EN 13715:2006+A1:2010 Railway applications - Wheelsets and bogies - Wheels - Tread profile |
|
|
|
CEN |
EN 13749:2011 Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
|
|
|
CEN |
EN 13803-1:2010 Railway applications - Track - Track alignment design parameters - Track gauges 1 435 mm and wider - Part 1: Plain line |
|
|
|
CEN |
EN 13803-2:2006+A1:2009 Railway applications - Track - Track alignment design parameters - Track gauges 1 435 mm and wider - Part 2: Switches and crossings and comparable alignment design situations with abrupt changes of curvature |
|
|
|
CEN |
EN 13848-5:2008+A1:2010 Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels - Plain line |
|
|
|
CEN |
EN 13979-1:2003+A2:2011 Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels |
EN 13979-1:2003+A1:2009 Note 2.1 |
30.9.2011 |
|
CEN |
EN 14033-1:2011 Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
|
|
|
CEN |
EN 14067-4:2005+A1:2009 Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track |
|
|
|
CEN |
EN 14067-5:2006+A1:2010 Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels |
|
|
|
CEN |
EN 14067-6:2010 Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment |
|
|
|
CEN |
EN 14531-1:2015 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles |
EN 14531-6:2009 Note 2.1 |
The date of this publication |
|
CEN |
EN 14531-2:2015 Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles |
EN 14531-6:2009 Note 2.1 |
The date of this publication |
|
CEN |
EN 14535-1:2005+A1:2011 Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
|
|
|
CEN |
EN 14535-2:2011 Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements |
|
|
|
CEN |
EN 14535-3:2015 Railway applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification |
|
|
|
CEN |
EN 14587-2:2009 Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
|
|
|
CEN |
EN 14601:2005+A1:2010 Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe |
|
|
|
CEN |
EN 14752:2015 Railway applications - Body side entrance systems for rolling stock |
|
|
|
CEN |
EN 14813-1:2006+A1:2010 Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters |
|
|
|
CEN |
EN 14813-2:2006+A1:2010 Railway applications - Air conditioning for driving cabs - Part 2: Type tests |
|
|
|
CEN |
EN 14865-1:2009+A1:2010 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate |
|
|
|
CEN |
EN 14865-2:2006+A2:2010 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h |
|
|
|
CEN |
EN 15020:2006+A1:2010 Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods |
|
|
|
CEN |
EN 15153-1:2013 Railway applications - External visible and audible warning devices for trains - Part 1: Head, marker and tail lamps |
|
|
|
CEN |
EN 15153-2:2013 Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns |
|
|
|
CEN |
EN 15220-1:2008+A1:2011 Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators |
|
|
|
CEN |
EN 15227:2008+A1:2010 Railway applications - Crashworthiness requirements for railway vehicle bodies |
|
|
|
CEN |
EN 15273-2:2013 Railway applications - Gauges - Part 2: Rolling stock gauge |
EN 15273-2:2009 Note 2.1 |
30.11.2013 |
|
CEN |
EN 15273-3:2013 Railway applications - Gauges - Part 3: Structure gauges |
EN 15273-3:2009 Note 2.1 |
30.11.2013 |
|
CEN |
EN 15302:2008+A1:2010 Railway applications - Method for determining the equivalent conicity |
|
|
|
CEN |
EN 15313:2010 Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance |
|
|
|
CEN |
EN 15355:2008+A1:2010 Railway applications - Braking - Distributor valves and distributor-isolating devices |
|
|
|
CEN |
EN 15427:2008+A1:2010 Railway applications - Wheel/rail friction management - Flange lubrication |
|
|
|
CEN |
EN 15437-1:2009 Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox |
|
|
|
CEN |
EN 15437-2:2012 Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 2: Performance and design requirements of on-board systems for temperature monitoring |
|
|
|
CEN |
EN 15461:2008+A1:2010 Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements |
|
|
|
CEN |
EN 15528:2015 Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure |
EN 15528:2008+A1:2012 Note 2.1 |
The date of this publication |
|
CEN |
EN 15551:2009+A1:2010 Railway applications - Railway rolling stock - Buffers |
|
|
|
CEN |
EN 15566:2009+A1:2010 Railway applications - Railway rolling stock - Draw gear and screw coupling |
|
|
|
CEN |
EN 15594:2009 Railway applications - Track - Restoration of rails by electric arc welding |
|
|
|
CEN |
EN 15595:2009+A1:2011 Railway applications - Braking - Wheel slide protection |
|
|
|
CEN |
EN 15610:2009 Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation |
|
|
|
CEN |
EN 15611:2008+A1:2010 Railway applications - Braking - Relay valves |
EN 15611:2008 Note 2.1 |
30.4.2011 |
|
CEN |
EN 15612:2008+A1:2010 Railway applications - Braking - Brake pipe accelerator valve |
EN 15612:2008 Note 2.1 |
30.4.2011 |
|
CEN |
EN 15624:2008+A1:2010 Railway applications - Braking - Empty-loaded changeover devices |
EN 15624:2008 Note 2.1 |
30.4.2011 |
|
CEN |
EN 15625:2008+A1:2010 Railway applications - Braking - Automatic variable load sensing devices |
EN 15625:2008 Note 2.1 |
30.4.2011 |
|
CEN |
EN 15663:2009 Railway applications - Definition of vehicle reference masses |
|
|
|
|
EN 15663:2009/AC:2010 |
|
|
|
CEN |
EN 15686:2010 Railway applications - Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G |
|
|
|
CEN |
EN 15687:2010 Railway applications - Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN |
|
|
|
CEN |
EN 15723:2010 Railway applications - Closing and locking devices for payload protecting devices against environmental influences - Requirements for durability, operation, indication, maintenance, recycling |
|
|
|
CEN |
EN 15734-1:2010 Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions |
|
|
|
CEN |
EN 15734-2:2010 Railway applications - Braking systems of high speed trains - Part 2: Test methods |
|
|
|
|
EN 15734-2:2010/AC:2012 |
|
|
|
CEN |
EN 15746-1:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working |
EN 15746-1:2010 Note 2.1 |
30.4.2011 |
|
CEN |
EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
EN 15746-2:2010 Note 2.1 |
30.4.2012 |
|
CEN |
EN 15806:2010 Railway applications - Braking - Static brake testing |
|
|
|
CEN |
EN 15807:2011 Railway applications - Pneumatic half couplings |
|
|
|
CEN |
EN 15827:2011 Railway applications - Requirements for bogies and running gears |
|
|
|
CEN |
EN 15839:2012 Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces |
|
|
|
CEN |
EN 15877-1:2012 Railway applications - Marking on railway vehicles - Part 1: Freight wagons |
|
|
|
CEN |
EN 15877-2:2013 Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines |
|
|
|
CEN |
EN 15892:2011 Railway applications - Noise Emission - Measurement of noise inside driver's cabs |
|
|
|
CEN |
EN 16019:2014 Railway applications - Automatic coupler - Performance requirements, specific interface geometry and test method |
|
|
|
CEN |
EN 16116-1:2013 Railway applications - Design requirements for steps, handrails and associated access for staff - Part 1: Passenger vehicles, luggage vans and locomotives |
|
|
|
CEN |
EN 16116-2:2013 Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons |
|
|
|
CEN |
EN 16185-1:2014 Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
|
|
|
CEN |
EN 16185-2:2014 Railway applications - Braking systems of multiple unit trains - Part 2: Test methods |
|
|
|
CEN |
EN 16207:2014 Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
|
|
|
CEN |
EN 16235:2013 Railway application - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363 |
|
|
|
CEN |
EN 16286-1:2013 Railway applications - Gangway systems between vehicles - Part 1: Main applications |
|
|
|
CEN |
EN 16334:2014 Railway applications - Passenger Alarm System - System requirements |
|
|
|
CEN |
EN 16404:2014 Railway applications - Re-railing and recovery requirements for railway vehicles |
|
|
|
CEN |
EN 16494:2015 Railway applications - Requirements for ERTMS Trackside Boards |
|
|
|
CEN |
EN 16683:2015 Railway applications - Call for aid and communication device - Requirements |
|
|
|
CEN |
EN 45545-1:2013 Railway applications - Fire protection on railway vehicles - Part 1: General |
|
|
|
CEN |
EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
EN 45545-2:2013 Note 2.1 |
The date of this publication |
|
CEN |
EN 45545-3:2013 Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
|
|
|
CEN |
EN 45545-4:2013 Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design |
|
|
|
CEN |
EN 45545-5:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
EN 45545-5:2013 Note 2.1 |
The date of this publication |
|
CEN |
EN 45545-6:2013 Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems |
|
|
|
CEN |
EN 45545-7:2013 Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations |
|
|
|
Cenelec |
EN 50122-1:2011 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock |
|
|
|
|
EN 50122-1:2011/AC:2012 |
|
|
|
Cenelec |
EN 50122-2:2010 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems |
|
|
|
Cenelec |
EN 50122-3:2010 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems |
|
|
|
Cenelec |
EN 50124-1:2001 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
|
|
|
|
EN 50124-1:2001/A1:2003 |
Note 3 |
1.10.2006 |
|
|
EN 50124-1:2001/A2:2005 |
Note 3 |
1.5.2008 |
|
|
EN 50124-1:2001/AC:2007 |
|
|
|
|
EN 50124-1:2001/AC:2010 |
|
|
|
Cenelec |
EN 50124-2:2001 Railway applications - Insulation coordination - Part 2: Overvoltages and related protection |
|
|
|
|
EN 50124-2:2001/AC:2010 |
|
|
|
Cenelec |
EN 50125-2:2002 Railway applications - Environmental conditions for equipment - Part 2: Fixed electrical installations |
|
|
|
|
EN 50125-2:2002/AC:2010 |
|
|
|
Cenelec |
EN 50125-3:2003 Railway applications - Environmental conditions for equipment - Part 3: Equipment for signalling and telecommunications |
|
|
|
|
EN 50125-3:2003/AC:2010 |
|
|
|
Cenelec |
EN 50126-1:1999 Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Basic requirements and generic process |
|
|
|
|
EN 50126-1:1999/AC:2012 |
|
|
|
|
EN 50126-1:1999/AC:2006 |
|
|
|
|
EN 50126-1:1999/AC:2010 |
|
|
|
Cenelec |
EN 50129:2003 Railway applications - Communication, signalling and processing systems - Safety related electronic systems for signalling |
|
|
|
|
EN 50129:2003/AC:2010 |
|
|
|
Cenelec |
EN 50151:2003 Railway applications - Fixed installations - Electric traction - Special requirements for composite insulators |
|
|
|
|
EN 50151:2003/AC:2010 |
|
|
|
Cenelec |
EN 50155:2007 Railway applications - Electronic equipment used on rolling stock |
EN 50155:2001 Note 2.1 |
|
|
|
EN 50155:2007/AC:2012 |
|
|
|
|
EN 50155:2007/AC:2010 |
|
|
|
Cenelec |
EN 50159:2010 Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems |
EN 50159-1:2001 EN 50159-2:2001 Note 2.1 |
1.9.2013 |
|
Cenelec |
EN 50163:2004 Railway applications - Supply voltages of traction systems |
|
|
|
|
EN 50163:2004/AC:2013 |
|
|
|
|
EN 50163:2004/A1:2007 |
Note 3 |
1.3.2010 |
|
|
EN 50163:2004/AC:2010 |
|
|
|
Cenelec |
EN 50238-1:2003 Railway applications - Compatibility between rolling stock and train detection systems - Part 1: General |
|
|
|
|
EN 50238-1:2003/AC:2014 |
|
|
|
Cenelec |
EN 50317:2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line |
EN 50317:2002 + A1:2004 + A2:2007 Note 2.1 |
26.12.2014 |
|
|
EN 50317:2012/AC:2012 |
|
|
|
Cenelec |
EN 50367:2012 Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) |
|
|
|
|
EN 50367:2012/AC:2013 |
|
|
|
Cenelec |
EN 50388:2012 Railway Applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability |
EN 50388:2005 Note 2.1 |
13.2.2015 |
|
|
EN 50388:2012/AC:2013 |
|
|
|
Cenelec |
EN 50463-1:2012 Railway applications - Energy measurement on board trains - Part 1: General |
|
|
|
Cenelec |
EN 50463-2:2012 Railway applications - Energy measurement on board trains - Part 2: Energy measuring |
|
|
|
Cenelec |
EN 50463-3:2012 Railway applications - Energy measurement on board trains - Part 3: Data handling |
|
|
|
Cenelec |
EN 50463-4:2012 Railway applications - Energy measurement on board trains - Part 4: Communication |
|
|
|
Cenelec |
EN 50463-5:2012 Railway applications - Energy measurement on board trains - Part 5: Conformity assessment |
|
|
|
Cenelec |
EN 50553:2012 Railway applications - Requirements for running capability in case of fire on board of rolling stock |
|
|
|
|
EN 50553:2012/AC:2013 |
|
|
|
|
EN 50553:2012/A1:2016 |
Note 3 |
15.2.2019 |
|
Cenelec |
EN 50617-1:2015 Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits |
|
|
|
Cenelec |
EN 50617-2:2015 Railway Applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 2: Axle counters |
|
|
|
Cenelec |
EN 61375-1:2012 Electronic railway equipment - Train communication network (TCN) - Part 1: General architecture IEC 61375-1:2012 |
|
|
|
Cenelec |
EN 61375-2-1:2012 Electronic railway equipment - Train communication network (TCN) - Part 2-1: Wire Train Bus (WTB) IEC 61375-2-1:2012 |
|
|
|
Cenelec |
EN 61375-2-2:2012 Electronic railway equipment - Train communication network (TCN) - Part 2-2: Wire Train Bus conformance testing IEC 61375-2-2:2012 |
|
|
|
Cenelec |
EN 61375-2-5:2015 Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone IEC 61375-2-5:2014 |
|
|
|
Cenelec |
EN 61375-3-1:2012 Electronic railway equipment - Train communication network (TCN) - Part 3-1: Multifunction Vehicle Bus (MVB) IEC 61375-3-1:2012 |
|
|
|
Cenelec |
EN 61375-3-2:2012 Electronic railway equipment - Train communication network (TCN) - Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing IEC 61375-3-2:2012 |
|
|
|
Cenelec |
EN 61375-3-3:2012 Electronic railway equipment - Train communication network (TCN) - Part 3-3: CANopen Consist Network (CCN) IEC 61375-3-3:2012 |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
Corrigenda
|
8.7.2016 |
EN |
Official Journal of the European Union |
C 249/206 |
Corrigendum to Commission communication in the framework of the implementation of Directive 98/79/EC of the European Parliament and of the Council on in vitro diagnostic medical devices
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
( Official Journal of the European Union C 173 of 13 May 2016 )
(2016/C 249/05)
On page 139, standard EN ISO 15197:2015:
for:
|
‘CEN |
EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) |
This is the first publication |
EN ISO 15197:2013 Note 2.1 |
30.6.2017 |
|
For blood glucose test strips and control solutions, the date of cessation of presumption of conformity of the superseded standard shall be 30.6.2017.’, |
||||
read:
|
‘CEN |
EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) |
13.5.2016 |
EN ISO 15197:2003 Note 2.1 |
31.7.2016 |
|
For blood glucose test strips and control solutions, the date of cessation of presumption of conformity of the superseded standard shall be 30.6.2017.’; |
||||
on page 140, standard EN ISO 23640:2015:
for:
|
‘CEN |
EN ISO 23640:2015 In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) |
This is the first publication |
EN ISO 23640:2013 Note 2.1 |
30.6.2017’, |
read:
|
‘CEN |
EN ISO 23640:2015 In vitro diagnostic medical devices – Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) |
13.5.2016 |
EN ISO 13640:2002 Note 2.1 |
30.6.2017’. |