ISSN 1977-091X |
||
Official Journal of the European Union |
C 54 |
|
English edition |
Information and Notices |
Volume 59 |
|
|
|
(1) Text with EEA relevance |
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
12.2.2016 |
EN |
Official Journal of the European Union |
C 54/1 |
Commission communication in the framework of the implementation of Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2016/C 054/01)
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
(1) |
(2) |
(3) |
(4) |
(5) |
CEN |
EN ISO 6185-1:2001 Inflatable boats — Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) |
This is the first publication |
|
|
CEN |
EN ISO 6185-2:2001 Inflatable boats — Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) |
This is the first publication |
|
|
CEN |
EN ISO 6185-3:2014 Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
This is the first publication |
|
|
CEN |
EN ISO 6185-4:2011 Inflatable boats — Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
This is the first publication |
|
|
CEN |
EN ISO 7840:2013 Small craft — Fire-resistant fuel hoses (ISO 7840:2013) |
This is the first publication |
|
|
CEN |
EN ISO 8469:2013 Small craft — Non-fire-resistant fuel hoses (ISO 8469:2013) |
This is the first publication |
|
|
CEN |
EN ISO 8665:2006 Small craft — Marine propulsion reciprocating internal combustion engines — Power measurements and declarations (ISO 8665:2006) |
This is the first publication |
|
|
CEN |
EN ISO 8666:2002 Small craft — Principal data (ISO 8666:2002) |
This is the first publication |
|
|
CEN |
EN ISO 8847:2004 Small craft — Steering gear — Cable and pulley systems (ISO 8847:2004) |
This is the first publication |
|
|
|
EN ISO 8847:2004/AC:2005 |
This is the first publication |
|
|
CEN |
EN ISO 8849:2003 Small craft — Electrically operated direct-current bilge-pumps (ISO 8849:2003) |
This is the first publication |
|
|
CEN |
EN ISO 9093-1:1997 Small craft — Seacocks and through-hull fittings — Part 1: Metallic (ISO 9093-1:1994) |
This is the first publication |
|
|
CEN |
EN ISO 9093-2:2002 Small craft — Seacocks and through-hull fittings — Part 2: Non-metallic (ISO 9093-2:2002) |
This is the first publication |
|
|
CEN |
EN ISO 9097:1994 Small craft — Electric fans (ISO 9097:1991) |
This is the first publication |
|
|
|
EN ISO 9097:1994/A1:2000 |
This is the first publication |
Note 3 |
|
CEN |
EN ISO 10088:2013 Small craft — Permanently installed fuel systems (ISO 10088:2013) |
This is the first publication |
|
|
CEN |
EN ISO 10133:2012 Small craft — Electrical systems — Extra-low-voltage d.c. installations (ISO 10133:2012) |
This is the first publication |
|
|
CEN |
EN ISO 10239:2014 Small craft — Liquefied petroleum gas (LPG) systems (ISO 10239:2014) |
This is the first publication |
|
|
CEN |
EN ISO 10592:1995 Small craft — Hydraulic steering systems (ISO 10592:1994) |
This is the first publication |
|
|
|
EN ISO 10592:1995/A1:2000 |
This is the first publication |
Note 3 |
|
CEN |
EN ISO 11105:1997 Small craft — Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997) |
This is the first publication |
|
|
CEN |
EN ISO 11192:2005 Small craft — Graphical symbols (ISO 11192:2005) |
This is the first publication |
|
|
CEN |
EN ISO 11547:1995 Small craft — Start-in-gear protection (ISO 11547:1994) |
This is the first publication |
|
|
|
EN ISO 11547:1995/A1:2000 |
This is the first publication |
Note 3 |
|
CEN |
EN ISO 11592:2001 Small craft less than 8 m length of hull — Determination of maximum propulsion power rating (ISO 11592:2001) |
This is the first publication |
|
|
CEN |
EN ISO 11812:2001 Small craft — Watertight cockpits and quick-draining cockpits (ISO 11812:2001) |
This is the first publication |
|
|
CEN |
EN ISO 12215-1:2000 Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
This is the first publication |
|
|
CEN |
EN ISO 12215-2:2002 Small craft — Hull construction and scantlings — Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
This is the first publication |
|
|
CEN |
EN ISO 12215-3:2002 Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
This is the first publication |
|
|
CEN |
EN ISO 12215-4:2002 Small craft — Hull construction and scantlings — Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
This is the first publication |
|
|
CEN |
EN ISO 12215-5:2008 Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
This is the first publication |
|
|
|
EN ISO 12215-5:2008/A1:2014 |
This is the first publication |
Note 3 |
|
CEN |
EN ISO 12215-6:2008 Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details (ISO 12215-6:2008) |
This is the first publication |
|
|
CEN |
EN ISO 12215-8:2009 Small craft — Hull construction and scantlings — Part 8: Rudders (ISO 12215-8:2009) |
This is the first publication |
|
|
|
EN ISO 12215-8:2009/AC:2010 |
This is the first publication |
|
|
CEN |
EN ISO 12215-9:2012 Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages (ISO 12215-9:2012) |
This is the first publication |
|
|
CEN |
EN ISO 12216:2002 Small craft — Windows, portlights, hatches, deadlights and doors — Strength and watertightness requirements (ISO 12216:2002) |
This is the first publication |
|
|
CEN |
EN ISO 12217-1:2015 Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
This is the first publication |
|
|
CEN |
EN ISO 12217-2:2015 Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
This is the first publication |
|
|
CEN |
EN ISO 12217-3:2015 Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
This is the first publication |
|
|
CEN |
EN ISO 13297:2014 Small craft — Electrical systems — Alternating current installations (ISO 13297:2014) |
This is the first publication |
|
|
CEN |
EN ISO 13590:2003 Small craft — Personal watercraft — Construction and system installation requirements (ISO 13590:2003) |
This is the first publication |
|
|
|
EN ISO 13590:2003/AC:2004 |
This is the first publication |
|
|
CEN |
EN ISO 14509-1:2008 Small craft — Airborne sound emitted by powered recreational craft — Part 1: Pass-by measurement procedures (ISO 14509-1:2008) |
This is the first publication |
|
|
CEN |
EN ISO 14509-2:2006 Small craft — Airborne sound emitted by powered recreational craft — Part 2: Sound assessment using reference craft (ISO 14509-2:2006) |
This is the first publication |
|
|
CEN |
EN ISO 14509-3:2009 Small craft — Airborne sound emitted by powered recreational craft — Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009) |
This is the first publication |
|
|
CEN |
EN ISO 14895:2003 Small craft — Liquid-fuelled galley stoves (ISO 14895:2000) |
This is the first publication |
|
|
CEN |
EN ISO 14946:2001 Small craft — Maximum load capacity (ISO 14946:2001) |
This is the first publication |
|
|
|
EN ISO 14946:2001/AC:2005 |
This is the first publication |
|
|
CEN |
EN ISO 15083:2003 Small craft — Bilge-pumping systems (ISO 15083:2003) |
This is the first publication |
|
|
CEN |
EN ISO 15084:2003 Small craft — Anchoring, mooring and towing — Strong points (ISO 15084:2003) |
This is the first publication |
|
|
CEN |
EN ISO 15584:2001 Small craft — Inboard petrol engines — Engine-mounted fuel and electrical components (ISO 15584:2001) |
This is the first publication |
|
|
CEN |
EN 15609:2012 LPG equipment and accessories — LPG propulsion systems for boats, yachts and other craft |
This is the first publication |
|
|
CEN |
EN ISO 15652:2005 Small craft — Remote steering systems for inboard mini jet boats (ISO 15652:2003) |
This is the first publication |
|
|
CEN |
EN ISO 16147:2002 Small craft — Inboard diesel engines — Engine-mounted fuel and electrical components (ISO 16147:2002) |
This is the first publication |
|
|
|
EN ISO 16147:2002/A1:2013 |
This is the first publication |
Note 3 |
|
CEN |
EN ISO 16180:2013 Small craft — Navigation lights — Installation, placement and visibility (ISO 16180:2013) |
This is the first publication |
|
|
CEN |
EN ISO 18854:2015 Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015) |
This is the first publication |
|
|
CEN |
EN ISO 19009:2015 Small craft — Electric navigation lights — Performance of LED lights (ISO 19009:2015) |
This is the first publication |
|
|
CEN |
EN ISO 21487:2012 Small craft — Permanently installed petrol and diesel fuel tanks (ISO 21487:2012) |
This is the first publication |
|
|
|
EN ISO 21487:2012/A1:2014 |
This is the first publication |
Note 3 |
|
CEN |
EN ISO 25197:2012 Small craft — Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012) |
This is the first publication |
|
|
|
EN ISO 25197:2012/A1:2014 |
This is the first publication |
Note 3 |
|
CEN |
EN 28846:1993 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases (ISO 8846:1990) |
This is the first publication |
|
|
|
EN 28846:1993/A1:2000 |
This is the first publication |
Note 3 |
|
CEN |
EN 28848:1993 Small craft — Remote steering systems (ISO 8848:1990) |
This is the first publication |
|
|
|
EN 28848:1993/A1:2000 |
This is the first publication |
Note 3 |
|
CEN |
EN 29775:1993 Small craft — Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990) |
This is the first publication |
|
|
|
EN 29775:1993/A1:2000 |
This is the first publication |
Note 3 |
|
Cenelec |
EN 60092-507:2015 Electrical installations in ships — Part 507 — Small vessels IEC 60092-507:2014 |
This is the first publication |
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
— |
Cenelec: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
12.2.2016 |
EN |
Official Journal of the European Union |
C 54/9 |
Commission communication in the framework of the implementation of Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008, Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008, Regulation (EC) No 1221/2009 of the European Parliament and of the Council of 25 November 2009
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2016/C 054/02)
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
(1) |
(2) |
(3) |
(4) |
(5) |
CEN |
EN ISO 9000:2015 Quality management systems — Fundamentals and vocabulary (ISO 9000:2015) |
11.12.2015 |
EN ISO 9000:2005 Note 2.1 |
15.9.2018 |
CEN |
EN ISO 9001:2015 Quality management systems — Requirements (ISO 9001:2015) |
11.12.2015 |
EN ISO 9001:2008 Note 2.1 |
15.9.2018 |
CEN |
EN ISO 14001:2015 Environmental management systems — Requirements with guidance for use (ISO 14001:2015) |
11.12.2015 |
EN ISO 14001:2004 Note 2.1 |
15.9.2018 |
CEN |
EN ISO 14004:2010 Environmental management systems — General guidelines on principles, systems and support techniques (ISO 14004:2004) |
5.10.2011 |
|
|
CEN |
EN ISO 14015:2010 Environmental management — Environmental assessment of sites and organizations (EASO) (ISO 14015:2001) |
5.10.2011 |
|
|
CEN |
EN ISO 14020:2001 Environmental labels and declarations — General principles (ISO 14020:2000) |
16.6.2009 |
|
|
CEN |
EN ISO 14021:2001 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) (ISO 14021:1999) |
16.6.2009 |
|
|
|
EN ISO 14021:2001/A1:2011 |
25.5.2012 |
Note 3 |
Date expired (30.6.2012) |
CEN |
EN ISO 14024:2000 Environmental labels and declarations — Type I environmental labelling — Principles and procedures (ISO 14024:1999) |
16.6.2009 |
|
|
CEN |
EN ISO 14031:2013 Environmental management — Environmental performance evaluation — Guidelines (ISO 14031:2013) |
28.11.2013 |
EN ISO 14031:1999 Note 2.1 |
Date expired (28.2.2014) |
CEN |
EN ISO 14040:2006 Environmental management — Life cycle assessment — Principles and framework (ISO 14040:2006) |
16.6.2009 |
|
|
CEN |
EN ISO 14044:2006 Environmental management — Life cycle assessment — Requirements and guidelines (ISO 14044:2006) |
16.6.2009 |
|
|
CEN |
EN ISO 14050:2010 Environmental management — Vocabulary (ISO 14050:2009) |
5.10.2011 |
|
|
CEN |
EN ISO 14063:2010 Environmental management — Environmental communication — Guidelines and examples (ISO 14063:2006) |
5.10.2011 |
|
|
CEN |
EN ISO 14064-1:2012 Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006) |
28.11.2013 |
|
|
CEN |
EN ISO 14064-2:2012 Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2006) |
28.11.2013 |
|
|
CEN |
EN ISO 14064-3:2012 Greenhouse gases — Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (ISO 14064-3:2006) |
28.11.2013 |
|
|
CEN |
EN ISO 14065:2013 Greenhouse gases — Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2013) |
7.9.2013 |
EN ISO 14065:2012 Note 2.1 |
Date expired (31.10.2013) |
CEN |
EN ISO 15189:2012 Medical laboratories — Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
13.3.2013 |
EN ISO 15189:2007 Note 2.1 |
Date expired (30.11.2015) |
CEN |
EN ISO 15195:2003 Laboratory medicine — Requirements for reference measurement laboratories (ISO 15195:2003) |
5.10.2011 |
|
|
CEN |
EN ISO/IEC 17000:2004 Conformity assessment — Vocabulary and general principles (ISO/IEC 17000:2004) |
16.6.2009 |
|
|
CEN |
EN ISO/IEC 17011:2004 Conformity assessment — General requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2004) |
16.6.2009 |
|
|
CEN |
EN ISO/IEC 17020:2012 Conformity assessment — Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
25.5.2012 |
EN ISO/IEC 17020:2004 Note 2.1 |
Date expired (1.3.2015) |
CEN |
EN ISO/IEC 17021-1:2015 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements (ISO/IEC 17021-1:2015) |
11.12.2015 |
EN ISO/IEC 17021:2011 Note 2.1 |
8.7.2017 |
CEN |
EN ISO/IEC 17024:2012 Conformity assessment — General requirements for bodies operating certification of persons (ISO/IEC 17024:2012) |
7.9.2013 |
EN ISO/IEC 17024:2003 Note 2.1 |
Date expired (1.7.2015) |
CEN |
EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005) |
16.6.2009 |
|
|
|
EN ISO/IEC 17025:2005/AC:2006 |
16.6.2009 |
|
|
CEN |
EN ISO/IEC 17040:2005 Conformity assessment — General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005) |
16.6.2009 |
|
|
CEN |
EN ISO/IEC 17043:2010 Conformity assessment — General requirements for proficiency testing (ISO/IEC 17043:2010) |
28.11.2013 |
|
|
CEN |
EN ISO/IEC 17050-1:2010 Conformity assessment — Supplier’s declaration of conformity — Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15) |
5.10.2011 |
EN ISO/IEC 17050-1:2004 Note 2.1 |
Date expired (5.10.2011) |
CEN |
EN ISO/IEC 17050-2:2004 Conformity assessment — Supplier’s declaration of conformity — Part 2: Supporting documentation (ISO/IEC 17050-2:2004) |
16.6.2009 |
|
|
CEN |
EN ISO/IEC 17065:2012 Conformity assessment — Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
7.9.2013 |
EN 45011:1998 Note 2.1 |
Date expired (15.9.2015) |
CEN |
EN ISO/IEC 17067:2013 Conformity assessment — Fundamentals of product certification and guidelines for product certification schemes (ISO/IEC 17067:2013) |
This is the first publication |
|
|
CEN |
EN ISO 19011:2011 Guidelines for auditing management systems (ISO 19011:2011) |
25.5.2012 |
EN ISO 19011:2002 Note 2.1 |
Date expired (31.5.2012) |
CEN |
EN ISO 22870:2006 Point-of-care testing (POCT) — Requirements for quality and competence (ISO 22870:2006) |
5.10.2011 |
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated, the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
— |
Cenelec: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716 (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
12.2.2016 |
EN |
Official Journal of the European Union |
C 54/14 |
Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC
(Publication of references of European Assessment Documents in accordance with Article 22 of Regulation (EU) No 305/2011)
(Text with EEA relevance)
(2016/C 054/03)
The provisions of Regulation (EU) No 305/2011 of the European Parliament and of the Council (1) prevail over any conflicting provisions in the European Assessment Documents
Reference and title of the European Assessment Document |
Reference and title of the superseded European Assessment Document |
Remarks |
|
(1) |
(2) |
(3) |
(4) |
020001-00-0405 |
Multi-axis concealed hinge assemblies |
|
|
020002-00-0404 |
Balcony (and terrace) glazing system without vertical frames |
|
|
040005-00-1201 |
Factory-made thermal and/or acoustic insulation products made of vegetable or animal fibres |
|
|
040048-00-0502 |
Rubber fibre mat to be used for impact sound insulation |
|
|
070001-00-0504 |
Gypsum plasterboards for load bearing applications |
|
|
090001-00-0404 |
Pre-fabricated compressed mineral wool boards with organic or inorganic finish and with specified fastening system |
|
|
120001-00-0106 |
Microprismatic retro-reflective sheetings |
|
|
120003-00-0106 |
Steel lighting columns |
|
|
130002-00-0304 |
Solid wood slab element — element of dowel jointed timber boards to be used as a structural element in buildings |
|
|
130005-00-0304 |
Solid wood slab element to be used as a structural element in buildings |
|
|
130010-00-0304 |
Glued laminated timber made of hardwood — structural laminated veneer lumber made of beech |
|
|
130012-00-0304 |
Strength graded structural timber — Square edged logs with wane — Chestnut |
|
|
130022-00-0304 |
Monolithic or laminated beam and wall logs made of timber |
|
|
130033-00-0603 |
Nails and screws for use in nailing plates in timber structures |
|
|
200005-00-0103 |
Structural steel piles with hollow sections and rigid splices |
|
|
200019-00-0102 |
Hexagonal woven mesh gabion boxes and mattresses |
|
|
220007-00-0402 |
Fully supported copper alloy sheet and strip for roofing, external cladding and internal lining |
|
|
220021-00-0402 |
Sun tunnel kits |
|
|
280001-00-0704 |
Preassembled line unit for drainage or infiltration |
|
|
330011-00-0601 |
Adjustable concrete screws |
|
|
330083-00-0601 |
Power-actuated fastener for multiple use in concrete for non-structural applications |
|
|
330153-00-0602 |
Cartridge fired pin for connections of thin gauge steel members and sheeting |
|
|
350005-00-1104 |
Intumescent products for fire sealing and fire stopping purposes |
|
|
Note:
European Assessment Documents (EAD) are adopted by the European Organisation for Technical Assessment (EOTA) in English. The European Commission is not responsible for the correctness of the titles which have been provided by EOTA for publication in the Official Journal of the European Union.
Publication of the references of European Assessment Documents in the Official Journal of the European Union does not imply that the European Assessment Documents are available in all the official languages of the European Union.
The European Organisation for Technical Assessment (http://www.eota.eu) shall keep the European Assessment Document available by electronic means in line with the provisions of point 8 of Annex II to Regulation (EU) No 305/2011.
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.