ISSN 1977-091X
Official Journal
of the European Union
C 412
English edition
Information and Notices
Volume 58
11 December 2015
|
ISSN 1977-091X |
||
|
Official Journal of the European Union |
C 412 |
|
|
|
||
|
English edition |
Information and Notices |
Volume 58 |
|
|
|
|
|
(1) Text with EEA relevance |
|
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
|
11.12.2015 |
EN |
Official Journal of the European Union |
C 412/1 |
Commission communication in the framework of the implementation of Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008, Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008, Regulation (EC) No 1221/2009 of the European Parliament and of the Council of 25 November 2009
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2015/C 412/01)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN ISO 9000:2015 Quality management systems — Fundamentals and vocabulary (ISO 9000:2015) |
This is the first publication |
EN ISO 9000:2005 Note 2.1 |
15.9.2018 |
|
CEN |
EN ISO 9001:2015 Quality management systems — Requirements (ISO 9001:2015) |
This is the first publication |
EN ISO 9001:2008 Note 2.1 |
15.9.2018 |
|
CEN |
EN ISO 14001:2015 Environmental management systems — Requirements with guidance for use (ISO 14001:2015) |
This is the first publication |
EN ISO 14001:2004 Note 2.1 |
15.9.2018 |
|
CEN |
EN ISO 14004:2010 Environmental management systems — General guidelines on principles, systems and support techniques (ISO 14004:2004) |
5.10.2011 |
|
|
|
CEN |
EN ISO 14015:2010 Environmental management — Environmental assessment of sites and organizations (EASO) (ISO 14015:2001) |
5.10.2011 |
|
|
|
CEN |
EN ISO 14020:2001 Environmental labels and declarations — General principles (ISO 14020:2000) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14021:2001 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) (ISO 14021:1999) |
16.6.2009 |
|
|
|
|
EN ISO 14021:2001/A1:2011 |
25.5.2012 |
Note 3 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 14024:2000 Environmental labels and declarations — Type I environmental labelling — Principles and procedures (ISO 14024:1999) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14031:2013 Environmental management — Environmental performance evaluation — Guidelines (ISO 14031:2013) |
28.11.2013 |
EN ISO 14031:1999 Note 2.1 |
Date expired (28.2.2014) |
|
CEN |
EN ISO 14040:2006 Environmental management — Life cycle assessment — Principles and framework (ISO 14040:2006) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14044:2006 Environmental management — Life cycle assessment — Requirements and guidelines (ISO 14044:2006) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14050:2010 Environmental management — Vocabulary (ISO 14050:2009) |
5.10.2011 |
|
|
|
CEN |
EN ISO 14063:2010 Environmental management — Environmental communication — Guidelines and examples (ISO 14063:2006) |
5.10.2011 |
|
|
|
CEN |
EN ISO 14064-1:2012 Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006) |
28.11.2013 |
|
|
|
CEN |
EN ISO 14064-2:2012 Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2006) |
28.11.2013 |
|
|
|
CEN |
EN ISO 14064-3:2012 Greenhouse gases — Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (ISO 14064-3:2006) |
28.11.2013 |
|
|
|
CEN |
EN ISO 14065:2013 Greenhouse gases — Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2013) |
7.9.2013 |
EN ISO 14065:2012 Note 2.1 |
Date expired (31.10.2013) |
|
CEN |
EN ISO 15189:2012 Medical laboratories — Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
13.3.2013 |
EN ISO 15189:2007 Note 2.1 |
Date expired (30.11.2015) |
|
CEN |
EN ISO 15195:2003 Laboratory medicine — Requirements for reference measurement laboratories (ISO 15195:2003) |
5.10.2011 |
|
|
|
CEN |
EN ISO/IEC 17000:2004 Conformity assessment — Vocabulary and general principles (ISO/IEC 17000:2004) |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17011:2004 Conformity assessment — General requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2004) |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17020:2012 Conformity assessment — Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
25.5.2012 |
EN ISO/IEC 17020:2004 Note 2.1 |
Date expired (1.3.2015) |
|
CEN |
EN ISO/IEC 17021-1:2015 Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements (ISO/IEC 17021-1:2015) |
This is the first publication |
EN ISO/IEC 17021:2011 Note 2.1 |
8.7.2017 |
|
CEN |
EN ISO/IEC 17024:2012 Conformity assessment — General requirements for bodies operating certification of persons (ISO/IEC 17024:2012) |
7.9.2013 |
EN ISO/IEC 17024:2003 Note 2.1 |
Date expired (1.7.2015) |
|
CEN |
EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005) |
16.6.2009 |
|
|
|
|
EN ISO/IEC 17025:2005/AC:2006 |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17040:2005 Conformity assessment — General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005) |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17043:2010 Conformity assessment — General requirements for proficiency testing (ISO/IEC 17043:2010) |
28.11.2013 |
|
|
|
CEN |
EN ISO/IEC 17050-1:2010 Conformity assessment — Supplier’s declaration of conformity — Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15) |
5.10.2011 |
EN ISO/IEC 17050-1:2004 Note 2.1 |
Date expired (5.10.2011) |
|
CEN |
EN ISO/IEC 17050-2:2004 Conformity assessment — Supplier’s declaration of conformity — Part 2: Supporting documentation (ISO/IEC 17050-2:2004) |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17065:2012 Conformity assessment — Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
7.9.2013 |
EN 45011:1998 Note 2.1 |
Date expired (15.9.2015) |
|
CEN |
EN ISO 19011:2011 Guidelines for auditing management systems (ISO 19011:2011) |
25.5.2012 |
EN ISO 19011:2002 Note 2.1 |
Date expired (31.5.2012) |
|
CEN |
EN ISO 22870:2006 Point-of-care testing (POCT) — Requirements for quality and competence (ISO 22870:2006) |
5.10.2011 |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and CENELEC also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘.../AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
|
11.12.2015 |
EN |
Official Journal of the European Union |
C 412/6 |
Commission communication in the framework of the implementation of the European Parliament and Council Directive 95/16/EC of 29 June 1995 on the approximation of the laws of the Member States relating to lifts
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2015/C 412/02)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 81-20:2014 Safety rules for the construction and installation of lifts — Lifts for the transport of persons and goods — Part 20: Passenger and goods passenger lifts |
14.11.2014 |
EN 81-1:1998+A3:2009 EN 81-2:1998+A3:2009 Note 2.1 |
31.8.2017 |
|
CEN |
EN 81-21:2009+A1:2012 Safety rules for the construction and installation of lifts — Lifts for the transport of persons and goods — Part 21: New passenger and goods passenger lifts in existing building |
31.10.2012 |
EN 81-21:2009 Note 2.1 |
Date expired (28.2.2013) |
|
CEN |
EN 81-22:2014 Safety rules for the construction and installation of lifts — Lifts for the transport of persons and goods — Part 22: Electric lifts with inclined path |
14.11.2014 |
|
|
|
CEN |
EN 81-28:2003 Safety rules for the construction and installation of lifts — Lifts for the transport of persons and goods — Part 28: Remote alarm on passenger and goods passenger lifts |
10.2.2004 |
|
|
|
Note 4 EN 81-28:2003 supersedes partly clause 14.2.3 of EN 81-1 and EN 81-2 with regard to alarm systems and EN 81-1 and EN 81-2 would be modified accordingly at the next revision. |
||||
|
CEN |
EN 81-50:2014 Safety rules for the construction and installation of lifts — Examinations and tests — Part 50: Design rules, calculations, examinations and tests of lift components |
14.11.2014 |
EN 81-1:1998+A3:2009 EN 81-2:1998+A3:2009 Note 2.1 |
31.8.2017 |
|
CEN |
EN 81-58:2003 Safety rules for the construction and installation of lifts — Examination and tests — Part 58: Landing doors fire resistance test |
10.2.2004 |
|
|
|
CEN |
EN 81-70:2003 Safety rules for the construction and installations of lifts — Particular applications for passenger and good passengers lifts — Part 70: Accessibility to lifts for persons including persons with disability |
6.8.2005 |
|
|
|
|
EN 81-70:2003/A1:2004 |
6.8.2005 |
Note 3 |
|
|
CEN |
EN 81-71:2005+A1:2006 Safety rules for the construction and installation of lifts — Particular applications to passenger lifts and goods passenger lifts — Part 71: Vandal resistant lifts |
11.10.2007 |
EN 81-71:2005 Note 2.1 |
Date expired (11.10.2007) |
|
CEN |
EN 81-72:2015 Safety rules for the construction and installation of lifts — Particular applications for passenger and goods passenger lifts — Part 72: Firefighters lifts |
This is the first publication |
EN 81-72:2003 Note 2.1 |
31.8.2017 |
|
CEN |
EN 81-73:2005 Safety rules for the construction and installation of lifts — Particular applications for passenger and goods passenger lifts — Part 73: Behaviour of lifts in the event of fire |
2.8.2006 |
|
|
|
CEN |
EN 81-77:2013 Safety rules for the construction and installations of lifts — Particular applications for passenger and goods passenger lifts — Part 77: Lifts subject to seismic conditions |
11.4.2014 |
|
|
|
CEN |
EN 12016:2013 Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity |
8.11.2013 |
EN 12016:2004+A1:2008 Note 2.1 |
Date expired (28.2.2014) |
|
CEN |
EN 12385-3:2004+A1:2008 Steel wire ropes — Safety — Part 3: Information for use and maintenance |
28.10.2008 |
EN 12385-3:2004 Note 2.1 |
Date expired (28.12.2009) |
|
CEN |
EN 12385-5:2002 Steel wire ropes — Safety — Part 5: Stranded ropes for lifts |
6.8.2005 |
|
|
|
|
EN 12385-5:2002/AC:2005 |
|
|
|
|
CEN |
EN 13015:2001+A1:2008 Maintenance for lifts and escalators — Rules for maintenance instructions |
28.10.2008 |
EN 13015:2001 Note 2.1 |
Date expired (28.12.2009) |
|
CEN |
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes — Safety — Part 7: Symmetric wedge socket |
8.9.2009 |
EN 13411-7:2006 Note 2.1 |
Date expired (28.12.2009) |
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and CENELEC also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘.../AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
|
11.12.2015 |
EN |
Official Journal of the European Union |
C 412/10 |
Commission communication in the framework of the implementation of Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2015/C 412/03)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
||||||||
|
(1) |
(2) |
(3) |
(4) |
(5) |
||||||||
|
CEN |
EN 132:1998 Respiratory protective devices — Definitions of terms and pictograms |
4.6.1999 |
EN 132:1990 Note 2.1 |
Date expired (30.6.1999) |
||||||||
|
CEN |
EN 133:2001 Respiratory protective devices — Classification |
10.8.2002 |
EN 133:1990 Note 2.1 |
Date expired (10.8.2002) |
||||||||
|
CEN |
EN 134:1998 Respiratory protective devices — Nomenclature of components |
13.6.1998 |
EN 134:1990 Note 2.1 |
Date expired (31.7.1998) |
||||||||
|
CEN |
EN 135:1998 Respiratory protective devices — List of equivalent terms |
4.6.1999 |
EN 135:1990 Note 2.1 |
Date expired (30.6.1999) |
||||||||
|
CEN |
EN 136:1998 Respiratory protective devices — Full face masks — Requirements, testing, marking |
13.6.1998 |
EN 136:1989 EN 136-10:1992 Note 2.1 |
Date expired (31.7.1998) |
||||||||
|
|
EN 136:1998/AC:2003 |
|
|
|
||||||||
|
CEN |
EN 137:2006 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with full face mask — Requirements, testing, marking |
23.11.2007 |
EN 137:1993 Note 2.1 |
Date expired (23.11.2007) |
||||||||
|
CEN |
EN 138:1994 Respiratory protective devices — Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly — Requirements, testing, marking |
16.12.1994 |
|
|
||||||||
|
CEN |
EN 140:1998 Respiratory protective devices — Half masks and quarter masks — Requirements, testing, marking |
6.11.1998 |
EN 140:1989 Note 2.1 |
Date expired (31.3.1999) |
||||||||
|
|
EN 140:1998/AC:1999 |
|
|
|
||||||||
|
CEN |
EN 142:2002 Respiratory protective devices — Mouthpiece assemblies — Requirements, testing, marking |
10.4.2003 |
EN 142:1989 Note 2.1 |
Date expired (10.4.2003) |
||||||||
|
CEN |
EN 143:2000 Respiratory protective devices — Particle filters — Requirements, testing, marking |
24.1.2001 |
EN 143:1990 Note 2.1 |
Date expired (24.1.2001) |
||||||||
|
|
EN 143:2000/AC:2005 |
|
|
|
||||||||
|
|
EN 143:2000/A1:2006 |
21.12.2006 |
Note 3 |
Date expired (21.12.2006) |
||||||||
|
CEN |
EN 144-1:2000 Respiratory protective devices — Gas cylinder valves — Part 1: Thread connections for insert connector |
24.1.2001 |
EN 144-1:1991 Note 2.1 |
Date expired (24.1.2001) |
||||||||
|
|
EN 144-1:2000/A1:2003 |
21.2.2004 |
Note 3 |
Date expired (21.2.2004) |
||||||||
|
|
EN 144-1:2000/A2:2005 |
6.10.2005 |
Note 3 |
Date expired (31.12.2005) |
||||||||
|
CEN |
EN 144-2:1998 Respiratory protective devices — Gas cylinder valves — Part 2: Outlet connections |
4.6.1999 |
|
|
||||||||
|
CEN |
EN 144-3:2003 Respiratory protective devices — Gas cylinder valves — Part 3: Outlet connections for diving gases Nitrox and oxygen |
21.2.2004 |
|
|
||||||||
|
|
EN 144-3:2003/AC:2003 |
|
|
|
||||||||
|
CEN |
EN 145:1997 Respiratory protective devices — Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type — Requirements, testing, marking |
19.2.1998 |
EN 145:1988 EN 145-2:1992 Note 2.1 |
Date expired (28.2.1998) |
||||||||
|
|
EN 145:1997/A1:2000 |
24.1.2001 |
Note 3 |
Date expired (24.1.2001) |
||||||||
|
CEN |
EN 148-1:1999 Respiratory protective devices — Threads for facepieces — Part 1: Standard thread connection |
4.6.1999 |
EN 148-1:1987 Note 2.1 |
Date expired (31.8.1999) |
||||||||
|
CEN |
EN 148-2:1999 Respiratory protective devices — Threads for facepieces — Part 2: Centre thread connection |
4.6.1999 |
EN 148-2:1987 Note 2.1 |
Date expired (31.8.1999) |
||||||||
|
CEN |
EN 148-3:1999 Respiratory protective devices — Threads for facepieces — Part 3: Tread connection M 45 x 3 |
4.6.1999 |
EN 148-3:1992 Note 2.1 |
Date expired (31.8.1999) |
||||||||
|
CEN |
EN 149:2001+A1:2009 Respiratory protective devices — Filtering half masks to protect against particles — Requirements, testing, marking |
6.5.2010 |
EN 149:2001 Note 2.1 |
Date expired (6.5.2010) |
||||||||
|
CEN |
EN 166:2001 Personal eye-protection — Specifications |
10.8.2002 |
EN 166:1995 Note 2.1 |
Date expired (10.8.2002) |
||||||||
|
CEN |
EN 167:2001 Personal eye-protection — Optical test methods |
10.8.2002 |
EN 167:1995 Note 2.1 |
Date expired (10.8.2002) |
||||||||
|
CEN |
EN 168:2001 Personal eye-protection — Non-optical test methods |
10.8.2002 |
EN 168:1995 Note 2.1 |
Date expired (10.8.2002) |
||||||||
|
CEN |
EN 169:2002 Personal eye-protection — Filters for welding and related techniques — Transmittance requirements and recommended use |
28.8.2003 |
EN 169:1992 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN 170:2002 Personal eye-protection — Ultraviolet filters — Transmittance requirements and recommended use |
28.8.2003 |
EN 170:1992 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN 171:2002 Personal eye-protection — Infrared filters — Transmittance requirements and recommended use |
10.4.2003 |
EN 171:1992 Note 2.1 |
Date expired (10.4.2003) |
||||||||
|
CEN |
EN 172:1994 Personal eye-protection — Sunglare filters for industrial use |
15.5.1996 |
|
|
||||||||
|
|
EN 172:1994/A1:2000 |
4.7.2000 |
Note 3 |
Date expired (31.10.2000) |
||||||||
|
|
EN 172:1994/A2:2001 |
10.8.2002 |
Note 3 |
Date expired (10.8.2002) |
||||||||
|
CEN |
EN 174:2001 Personal eye-protection — Ski goggles for downhill skiing |
21.12.2001 |
EN 174:1996 Note 2.1 |
Date expired (21.12.2001) |
||||||||
|
CEN |
EN 175:1997 Personal protection — Equipment for eye and face protection during welding and allied processes |
19.2.1998 |
|
|
||||||||
|
CEN |
EN 207:2009 Personal eye-protection equipment — Filters and eye-protectors against laser radiation (laser eye-protectors) |
6.5.2010 |
EN 207:1998 Note 2.1 |
Date expired (30.6.2010) |
||||||||
|
|
EN 207:2009/AC:2011 |
|
|
|
||||||||
|
CEN |
EN 208:2009 Personal eye-protection — Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
6.5.2010 |
EN 208:1998 Note 2.1 |
Date expired (30.6.2010) |
||||||||
|
CEN |
EN 250:2014 Respiratory equipment — Open-circuit self-contained compressed air diving apparatus — Requirements, testing and marking |
12.12.2014 |
EN 250:2000 Note 2.1 |
Date expired (31.12.2014) |
||||||||
|
CEN |
EN 269:1994 Respiratory protective devices — Powered fresh air hose breathing apparatus incorporating a hood — Requirements, testing, marking |
16.12.1994 |
|
|
||||||||
|
CEN |
EN 342:2004 Protective clothing — Ensembles and garments for protection against cold |
6.10.2005 |
|
|
||||||||
|
|
EN 342:2004/AC:2008 |
|
|
|
||||||||
|
CEN |
EN 343:2003+A1:2007 Protective clothing — Protection against rain |
8.3.2008 |
EN 343:2003 Note 2.1 |
Date expired (8.3.2008) |
||||||||
|
|
EN 343:2003+A1:2007/AC:2009 |
|
|
|
||||||||
|
CEN |
EN 348:1992 Protective clothing — Test method: Determination of behaviour of materials on impact of small splashes of molten metal |
23.12.1993 |
|
|
||||||||
|
|
EN 348:1992/AC:1993 |
|
|
|
||||||||
|
CEN |
EN 352-1:2002 Hearing protectors — General requirements — Part 1: Ear-Muffs |
28.8.2003 |
EN 352-1:1993 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN 352-2:2002 Hearing protectors — General requirements — Part 2: Ear-plugs |
28.8.2003 |
EN 352-2:1993 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN 352-3:2002 Hearing protectors — General requirements — Part 3: Ear-muffs attached to an industrial safety helmet |
28.8.2003 |
EN 352-3:1996 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN 352-4:2001 Hearing protectors — Safety requirements and testing — Part 4: Level-dependent ear-muffs |
10.8.2002 |
|
|
||||||||
|
|
EN 352-4:2001/A1:2005 |
19.4.2006 |
Note 3 |
Date expired (30.4.2006) |
||||||||
|
CEN |
EN 352-5:2002 Hearing protectors — Safety requirements and testing — Part 5: Active noise reduction ear-muffs |
28.8.2003 |
|
|
||||||||
|
|
EN 352-5:2002/A1:2005 |
6.5.2010 |
Note 3 |
Date expired (6.5.2010) |
||||||||
|
CEN |
EN 352-6:2002 Hearing protectors — Safety requirements and testing — Part 6: Ear-muffs with electrical audio input |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 352-7:2002 Hearing protectors — Safety requirements and testing — Part 7: Level-dependent ear-plugs |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 352-8:2008 Hearing protectors — Safety requirements and testing — Part 8: Entertainment audio ear-muffs |
28.1.2009 |
|
|
||||||||
|
CEN |
EN 353-1:2014 Personal fall protection equipment — Guided type fall arresters including an anchor line — Part 1: Guided type fall arresters including a rigid anchor line |
This is the first publication |
|
|
||||||||
|
CEN |
EN 353-2:2002 Personal protective equipment against falls from a height — Part 2: Guided type fall arresters including a flexible anchor line |
28.8.2003 |
EN 353-2:1992 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN 354:2010 Personal fall protection equipment — Lanyards |
9.7.2011 |
EN 354:2002 Note 2.1 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN 355:2002 Personal protective equipment against falls from a height — Energy absorbers |
28.8.2003 |
EN 355:1992 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN 358:1999 Personal protective equipment for work positioning and prevention of falls from a height — Belts for work positioning and restraint and work positioning lanyards |
21.12.2001 |
EN 358:1992 Note 2.1 |
Date expired (21.12.2001) |
||||||||
|
CEN |
EN 360:2002 Personal protective equipment against falls from a height — Retractable type fall arresters |
28.8.2003 |
EN 360:1992 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN 361:2002 Personal protective equipment against falls from a height — Full body harnesses |
28.8.2003 |
EN 361:1992 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN 362:2004 Personal protective equipment against falls from a height — Connectors |
6.10.2005 |
EN 362:1992 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
CEN |
EN 363:2008 Personal fall protection equipment — Personal fall protection systems |
20.6.2008 |
EN 363:2002 Note 2.1 |
Date expired (31.8.2008) |
||||||||
|
CEN |
EN 364:1992 Personal protective equipment against falls from a height — Test methods |
23.12.1993 |
|
|
||||||||
|
|
EN 364:1992/AC:1993 |
|
|
|
||||||||
|
CEN |
EN 365:2004 Personal protective equipment against falls from a height — General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
6.10.2005 |
EN 365:1992 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
|
EN 365:2004/AC:2006 |
|
|
|
||||||||
|
CEN |
EN 367:1992 Protective clothing — Protection against heat and fire — Method of determining heat transmission on exposure to flame |
23.12.1993 |
|
|
||||||||
|
|
EN 367:1992/AC:1992 |
|
|
|
||||||||
|
CEN |
EN 374-1:2003 Protective gloves against chemicals and micro-organisms — Part 1: Terminology and performance requirements |
6.10.2005 |
EN 374-1:1994 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
CEN |
EN 374-2:2003 Protective gloves against chemicals and micro-organisms — Part 2: Determination of resistance to penetration |
6.10.2005 |
EN 374-2:1994 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
CEN |
EN 374-3:2003 Protective gloves against chemicals and micro-organisms — Part 3: Determination of resistance to permeation by chemicals |
6.10.2005 |
EN 374-3:1994 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
|
EN 374-3:2003/AC:2006 |
|
|
|
||||||||
|
CEN |
EN 374-4:2013 Protective gloves against chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals |
11.4.2014 |
|
|
||||||||
|
CEN |
EN 379:2003+A1:2009 Personal eye-protection — Automatic welding filters |
6.5.2010 |
EN 379:2003 Note 2.1 |
Date expired (6.5.2010) |
||||||||
|
CEN |
EN 381-1:1993 Protective clothing for users of hand-held chainsaws — Part 1: Test rig for testing resistance to cutting by a chainsaw |
23.12.1993 |
|
|
||||||||
|
CEN |
EN 381-2:1995 Protective clothing for users of hand-held chainsaws — Part 2: Test methods for leg protectors |
12.1.1996 |
|
|
||||||||
|
CEN |
EN 381-3:1996 Protective clothing for users of hand-held chain-saws — Part 3: Test methods for footwear |
10.10.1996 |
|
|
||||||||
|
CEN |
EN 381-4:1999 Protective clothing for users of hand-held chainsaws — Part 4: Test methods for chainsaw protective gloves |
16.3.2000 |
|
|
||||||||
|
CEN |
EN 381-5:1995 Protective clothing for users of hand-held chainsaws — Part 5: Requirements for leg protectors |
12.1.1996 |
|
|
||||||||
|
CEN |
EN 381-7:1999 Protective clothing for users of hand-held chainsaws — Part 7: Requirements for chainsaw protective gloves |
16.3.2000 |
|
|
||||||||
|
CEN |
EN 381-8:1997 Protective clothing for users of hand-held chainsaws — Part 8: Test methods for chain saw protective gaiters |
18.10.1997 |
|
|
||||||||
|
CEN |
EN 381-9:1997 Protective clothing for users of hand-held chainsaws — Part 9: Requirements for chain saw protective gaiters |
18.10.1997 |
|
|
||||||||
|
CEN |
EN 381-10:2002 Protective clothing for users of hand-held chainsaws — Part 10: Test method for upper body protectors |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 381-11:2002 Protective clothing for users of hand-held chainsaws — Part 11: Requirements for upper body protectors |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 388:2003 Protective gloves against mechanical risks |
6.10.2005 |
EN 388:1994 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
CEN |
EN 397:2012+A1:2012 Industrial safety helmets |
20.12.2012 |
EN 397:2012 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 402:2003 Respiratory protective devices — Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape — Requirements, testing, marking |
21.2.2004 |
EN 402:1993 Note 2.1 |
Date expired (21.2.2004) |
||||||||
|
CEN |
EN 403:2004 Respiratory protective devices for self-rescue — Filtering devices with hood for escape from fire — Requirements, testing, marking |
6.10.2005 |
EN 403:1993 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
CEN |
EN 404:2005 Respiratory protective devices for self-rescue — Filter self-rescuer from carbon monoxide with mouthpiece assembly |
6.10.2005 |
EN 404:1993 Note 2.1 |
Date expired (2.12.2005) |
||||||||
|
CEN |
EN 405:2001+A1:2009 Respiratory protective devices — Valved filtering half masks to protect against gases or gases and particles — Requirements, testing, marking |
6.5.2010 |
EN 405:2001 Note 2.1 |
Date expired (6.5.2010) |
||||||||
|
CEN |
EN 407:2004 Protective gloves against thermal risks (heat and/or fire) |
6.10.2005 |
EN 407:1994 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
CEN |
EN 420:2003+A1:2009 Protective gloves — General requirements and test methods |
6.5.2010 |
EN 420:2003 Note 2.1 |
Date expired (31.5.2010) |
||||||||
|
CEN |
EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination |
9.7.2011 |
EN 421:1994 Note 2.1 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN 443:2008 Helmets for fire fighting in buildings and other structures |
20.6.2008 |
EN 443:1997 Note 2.1 |
Date expired (31.8.2008) |
||||||||
|
CEN |
EN 458:2004 Hearing protectors — Recommendations for selection, use, care and maintenance — Guidance document |
6.10.2005 |
EN 458:1993 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
CEN |
EN 464:1994 Protective clothing — Protection against liquid and gaseous chemicals, including aerosols and solid particles — Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test) |
16.12.1994 |
|
|
||||||||
|
CEN |
EN 469:2014 Protective clothing for firefighters — Performance requirements for protective clothing for firefighting |
12.12.2014 |
EN 469:2005 Note 2.1 |
Date expired (31.1.2015) |
||||||||
|
CEN |
EN 510:1993 Specification for protective clothing for use where there is a risk of entanglement with moving parts |
16.12.1994 |
|
|
||||||||
|
CEN |
EN 511:2006 Protective gloves against cold |
21.12.2006 |
EN 511:1994 Note 2.1 |
Date expired (21.12.2006) |
||||||||
|
CEN |
EN 530:2010 Abrasion resistance of protective clothing material — Test methods |
9.7.2011 |
EN 530:1994 Note 2.1 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN 564:2014 Mountaineering equipment — Accessory cord — Safety requirements and test methods |
This is the first publication |
EN 564:2006 Note 2.1 |
31.1.2016 |
||||||||
|
CEN |
EN 565:2006 Mountaineering equipment — Tape — Safety requirements and test methods |
8.3.2008 |
EN 565:1997 Note 2.1 |
Date expired (8.3.2008) |
||||||||
|
CEN |
EN 566:2006 Mountaineering equipment — Slings — Safety requirements and test methods |
8.3.2008 |
EN 566:1997 Note 2.1 |
Date expired (8.3.2008) |
||||||||
|
CEN |
EN 567:2013 Mountaineering equipment — Rope clamps — Safety requirements and test methods |
28.6.2013 |
EN 567:1997 Note 2.1 |
Date expired (30.9.2013) |
||||||||
|
CEN |
EN 568:2007 Mountaineering equipment — Ice anchors — Safety requirements and test methods |
8.3.2008 |
EN 568:1997 Note 2.1 |
Date expired (8.3.2008) |
||||||||
|
CEN |
EN 569:2007 Mountaineering equipment — Pitons — Safety requirements and test methods |
8.3.2008 |
EN 569:1997 Note 2.1 |
Date expired (8.3.2008) |
||||||||
|
CEN |
EN 659:2003+A1:2008 Protective gloves for firefighters |
20.6.2008 |
EN 659:2003 Note 2.1 |
Date expired (30.9.2008) |
||||||||
|
|
EN 659:2003+A1:2008/AC:2009 |
|
|
|
||||||||
|
CEN |
EN 702:1994 Protective clothing — Protection against heat and flame — Test method: Determination of the contact heat transmission through protective clothing or its materials |
12.1.1996 |
|
|
||||||||
|
CEN |
EN 795:2012 Personal fall protection equipment — Anchor devices |
This is the first publication |
EN 795:1996 Note 2.1 |
The date of this publication |
||||||||
|
Warning: This publication does not concern the equipment described in:
|
||||||||||||
|
CEN |
EN 812:2012 Industrial bump caps |
20.12.2012 |
EN 812:1997 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 813:2008 Personal fall protection equipment — Sit harnesses |
28.1.2009 |
EN 813:1997 Note 2.1 |
Date expired (28.2.2009) |
||||||||
|
CEN |
EN 863:1995 Protective clothing — Mechanical properties — Test method: Puncture resistance |
15.5.1996 |
|
|
||||||||
|
CEN |
EN 892:2012 Mountaineering equipment — Dynamic mountaineering ropes — Safety requirements and test methods |
20.12.2012 |
EN 892:2004 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 893:2010 Mountaineering equipment — Crampons — Safety requirements and test methods |
9.7.2011 |
EN 893:1999 Note 2.1 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN 943-1:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles — Part 1: Performance requirements for ventilated and non-ventilated ‘gas-tight’ (Type 1) and ‘non-gas-tight’ (Type 2) chemical protective suits |
28.8.2003 |
|
|
||||||||
|
|
EN 943-1:2002/AC:2005 |
|
|
|
||||||||
|
CEN |
EN 943-2:2002 Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles — Part 2: Performance requirements for ‘gas-tight’ (Type 1) chemical protective suits for emergency teams (ET) |
10.8.2002 |
|
|
||||||||
|
CEN |
EN 958:2006+A1:2010 Mountaineering equipment — Energy absorbing systems for use in klettersteig (via ferrata) climbing — Safety requirements and test methods |
9.7.2011 |
EN 958:2006 Note 2.1 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN 960:2006 Headforms for use in the testing of protective helmets |
21.12.2006 |
EN 960:1994 Note 2.1 |
Date expired (31.12.2006) |
||||||||
|
CEN |
EN 966:2012+A1:2012 Helmets for airborne sports |
20.12.2012 |
EN 966:2012 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 1073-1:1998 Protective clothing against radioactive contamination — Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactive contamination |
6.11.1998 |
|
|
||||||||
|
CEN |
EN 1073-2:2002 Protective clothing against radioactive contamination — Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 1077:2007 Helmets for alpine skiers and snowboarders |
8.3.2008 |
EN 1077:1996 Note 2.1 |
Date expired (8.3.2008) |
||||||||
|
CEN |
EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates |
20.12.2012 |
EN 1078:2012 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 1080:2013 Impact protection helmets for young children |
28.6.2013 |
EN 1080:1997 Note 2.1 |
Date expired (31.8.2013) |
||||||||
|
CEN |
EN 1082-1:1996 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 1: Chain mail gloves and arm guards |
14.6.1997 |
|
|
||||||||
|
CEN |
EN 1082-2:2000 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 2: Gloves and arm guards made of material other than chain mail |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 1082-3:2000 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 3: Impact cut test for fabric, leather and other materials |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 1146:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape — Requirements, testing, marking |
19.4.2006 |
EN 1146:1997 Note 2.1 |
Date expired (30.4.2006) |
||||||||
|
CEN |
EN 1149-1:2006 Protective clothing — Electrostatic properties — Part 1: Test method for measurement of surface resistivity |
21.12.2006 |
EN 1149-1:1995 Note 2.1 |
Date expired (31.12.2006) |
||||||||
|
CEN |
EN 1149-2:1997 Protective clothing — Electrostatic properties — Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
19.2.1998 |
|
|
||||||||
|
CEN |
EN 1149-3:2004 Protective clothing — Electrostatic properties — Part 3: Test methods for measurement of charge decay |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 1149-5:2008 Protective clothing — Electrostatic properties — Part 5: Material performance and design requirements |
20.6.2008 |
|
|
||||||||
|
CEN |
EN 1150:1999 Protective clothing — Visibility clothing for non-professional use — Test methods and requirements |
4.6.1999 |
|
|
||||||||
|
CEN |
EN 1385:2012 Helmets for canoeing and white water sports |
20.12.2012 |
EN 1385:1997 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 1486:2007 Protective clothing for fire-fighters — Test methods and requirements for reflective clothing for specialised fire-fighting |
8.3.2008 |
EN 1486:1996 Note 2.1 |
Date expired (30.4.2008) |
||||||||
|
CEN |
EN 1497:2007 Personal fall protection equipment — Rescue harnesses |
8.3.2008 |
|
|
||||||||
|
CEN |
EN 1621-1:2012 Motorcyclists’ protective clothing against mechanical impact — Part 1: Motorcyclists’ limb joint impact protectors — Requirements and test methods |
13.3.2013 |
EN 1621-1:1997 Note 2.1 |
Date expired (30.6.2013) |
||||||||
|
CEN |
EN 1621-2:2014 Motorcyclists’ protective clothing against mechanical impact — Part 2: Motorcyclists’ back protectors — Requirements and test methods |
12.12.2014 |
EN 1621-2:2003 Note 2.1 |
Date expired (31.12.2014) |
||||||||
|
CEN |
EN 1731:2006 Personal eye-protection — Mesh eye and face protectors |
23.11.2007 |
EN 1731:1997 Note 2.1 |
Date expired (23.11.2007) |
||||||||
|
CEN |
EN 1809:2014 Diving equipment — Buoyancy compensators — Functional and safety requirements, test methods |
12.12.2014 |
EN 1809:1997 Note 2.1 |
Date expired (31.12.2014) |
||||||||
|
CEN |
EN 1827:1999+A1:2009 Respiratory protective devices — Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only — Requirements, testing, marking |
6.5.2010 |
EN 1827:1999 Note 2.1 |
Date expired (6.5.2010) |
||||||||
|
CEN |
EN 1868:1997 Personal protective equipment against falls from a height — List of equivalent terms |
18.10.1997 |
|
|
||||||||
|
CEN |
EN 1891:1998 Personal protective equipment for the prevention of falls from a height — Low stretch kernmantel ropes |
6.11.1998 |
|
|
||||||||
|
CEN |
EN 1938:2010 Personal eye-protection — Goggles for motorcycle and moped users |
9.7.2011 |
EN 1938:1998 Note 2.1 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN ISO 4869-2:1995 Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994) |
15.5.1996 |
|
|
||||||||
|
|
EN ISO 4869-2:1995/AC:2007 |
|
|
|
||||||||
|
CEN |
EN ISO 4869-3:2007 Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007) |
8.3.2008 |
EN 24869-3:1993 Note 2.1 |
Date expired (8.3.2008) |
||||||||
|
CEN |
EN ISO 6529:2001 Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) |
6.10.2005 |
EN 369:1993 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
CEN |
EN ISO 6530:2005 Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
6.10.2005 |
EN 368:1992 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
CEN |
EN ISO 6942:2002 Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
28.8.2003 |
EN 366:1993 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN ISO 9185:2007 Protective clothing — Assessment of resistance of materials to molten metal splash (ISO 9185:2007) |
8.3.2008 |
EN 373:1993 Note 2.1 |
Date expired (8.3.2008) |
||||||||
|
CEN |
EN ISO 10256:2003 Head and face protection for use in ice hockey (ISO 10256:2003) |
6.10.2005 |
EN 967:1996 Note 2.1 |
Date expired (6.10.2005) |
||||||||
|
CEN |
EN ISO 10819:2013 Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) |
13.12.2013 |
EN ISO 10819:1996 Note 2.1 |
Date expired (13.12.2013) |
||||||||
|
CEN |
EN ISO 10862:2009 Small craft — Quick release system for trapeze harness (ISO 10862:2009) |
6.5.2010 |
|
|
||||||||
|
CEN |
EN ISO 11611:2015 Protective clothing for use in welding and allied processes (ISO 11611:2015) |
This is the first publication |
EN ISO 11611:2007 Note 2.1 |
31.1.2016 |
||||||||
|
CEN |
EN ISO 11612:2015 Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements (ISO 11612:2015) |
This is the first publication |
EN ISO 11612:2008 Note 2.1 |
31.1.2016 |
||||||||
|
CEN |
EN 12021:2014 Respiratory equipment — Compressed gases for breathing apparatus |
12.12.2014 |
|
|
||||||||
|
CEN |
EN 12083:1998 Respiratory protective devices — Filters with breathing hoses, (Non-mask mounted filters) — Particle filters, gas filters, and combined filters — Requirements, testing, marking |
4.7.2000 |
|
|
||||||||
|
|
EN 12083:1998/AC:2000 |
|
|
|
||||||||
|
CEN |
EN ISO 12127-2:2007 Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007) |
8.3.2008 |
|
|
||||||||
|
CEN |
EN 12270:2013 Mountaineering equipment — Chocks — Safety requirements and test methods |
11.4.2014 |
EN 12270:1998 Note 2.1 |
Date expired (31.5.2014) |
||||||||
|
CEN |
EN 12275:2013 Mountaineering equipment — Connectors — Safety requirements and test methods |
13.12.2013 |
EN 12275:1998 Note 2.1 |
Date expired (13.12.2013) |
||||||||
|
CEN |
EN 12276:2013 Mountaineering equipment — Frictional anchors — Safety requirements and test methods |
11.4.2014 |
EN 12276:1998 Note 2.1 |
Date expired (31.5.2014) |
||||||||
|
CEN |
EN 12277:2007 Mountaineering equipment — Harnesses — Safety requirements and test methods |
23.11.2007 |
EN 12277:1998 Note 2.1 |
Date expired (23.11.2007) |
||||||||
|
CEN |
EN 12278:2007 Mountaineering equipment — Pulleys — Safety requirements and test methods |
23.11.2007 |
EN 12278:1998 Note 2.1 |
Date expired (30.11.2007) |
||||||||
|
CEN |
EN ISO 12311:2013 Personal protective equipment — Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15) |
13.12.2013 |
|
|
||||||||
|
CEN |
EN ISO 12312-1:2013 Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use (ISO 12312-1:2013) |
13.12.2013 |
EN 1836:2005+A1:2007 Note 2.3 |
Date expired (28.2.2015) |
||||||||
|
CEN |
EN ISO 12312-2:2015 Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun (ISO 12312-2:2015) |
This is the first publication |
|
|
||||||||
|
CEN |
EN ISO 12401:2009 Small craft — Deck safety harness and safety line — Safety requirements and test methods (ISO 12401:2009) |
6.5.2010 |
EN 1095:1998 Note 2.1 |
Date expired (6.5.2010) |
||||||||
|
CEN |
EN ISO 12402-2:2006 Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements (ISO 12402-2:2006) |
21.12.2006 |
EN 399:1993 Note 2.1 |
Date expired (31.3.2007) |
||||||||
|
|
EN ISO 12402-2:2006/A1:2010 |
9.7.2011 |
Note 3 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN ISO 12402-3:2006 Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements (ISO 12402-3:2006) |
21.12.2006 |
EN 396:1993 Note 2.1 |
Date expired (31.3.2007) |
||||||||
|
|
EN ISO 12402-3:2006/A1:2010 |
9.7.2011 |
Note 3 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN ISO 12402-4:2006 Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements (ISO 12402-4:2006) |
21.12.2006 |
EN 395:1993 Note 2.1 |
Date expired (31.3.2007) |
||||||||
|
|
EN ISO 12402-4:2006/A1:2010 |
9.7.2011 |
Note 3 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN ISO 12402-5:2006 Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements (ISO 12402-5:2006) |
21.12.2006 |
EN 393:1993 Note 2.1 |
Date expired (31.3.2007) |
||||||||
|
|
EN ISO 12402-5:2006/AC:2006 |
|
|
|
||||||||
|
|
EN ISO 12402-5:2006/A1:2010 |
9.7.2011 |
Note 3 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN ISO 12402-6:2006 Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods (ISO 12402-6:2006) |
21.12.2006 |
|
|
||||||||
|
|
EN ISO 12402-6:2006/A1:2010 |
9.7.2011 |
Note 3 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN ISO 12402-8:2006 Personal flotation devices — Part 8: Accessories — Safety requirements and test methods (ISO 12402-8:2006) |
2.8.2006 |
EN 394:1993 Note 2.1 |
Date expired (31.8.2006) |
||||||||
|
|
EN ISO 12402-8:2006/A1:2011 |
11.11.2011 |
Note 3 |
Date expired (11.11.2011) |
||||||||
|
CEN |
EN ISO 12402-9:2006 Personal flotation devices — Part 9: Test methods (ISO 12402-9:2006) |
21.12.2006 |
|
|
||||||||
|
|
EN ISO 12402-9:2006/A1:2011 |
11.11.2011 |
Note 3 |
Date expired (11.11.2011) |
||||||||
|
CEN |
EN ISO 12402-10:2006 Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006) |
2.8.2006 |
|
|
||||||||
|
CEN |
EN 12477:2001 Protective gloves for welders |
10.8.2002 |
|
|
||||||||
|
|
EN 12477:2001/A1:2005 |
6.10.2005 |
Note 3 |
Date expired (31.12.2005) |
||||||||
|
CEN |
EN 12492:2012 Mountaineering equipment — Helmets for mountaineers — Safety requirements and test methods |
20.12.2012 |
EN 12492:2000 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 12628:1999 Diving accessories — Combined buoyancy and rescue devices — Functional and safety requirements, test methods |
4.7.2000 |
|
|
||||||||
|
|
EN 12628:1999/AC:2000 |
|
|
|
||||||||
|
CEN |
EN 12841:2006 Personal fall protection equipment — Rope access systems — Rope adjustment devices |
21.12.2006 |
|
|
||||||||
|
CEN |
EN 12941:1998 Respiratory protective devices — Powered filtering devices incorporating a helmet or a hood — Requirements, testing, marking |
4.6.1999 |
EN 146:1991 Note 2.1 |
Date expired (4.6.1999) |
||||||||
|
|
EN 12941:1998/A1:2003 |
6.10.2005 |
Note 3 |
Date expired (6.10.2005) |
||||||||
|
|
EN 12941:1998/A2:2008 |
5.6.2009 |
Note 3 |
Date expired (5.6.2009) |
||||||||
|
CEN |
EN 12942:1998 Respiratory protective devices — Power assisted filtering devices incorporating full face masks, half masks or quarter masks — Requirements, testing, marking |
4.6.1999 |
EN 147:1991 Note 2.1 |
Date expired (4.6.1999) |
||||||||
|
|
EN 12942:1998/A1:2002 |
28.8.2003 |
Note 3 |
Date expired (28.8.2003) |
||||||||
|
|
EN 12942:1998/A2:2008 |
5.6.2009 |
Note 3 |
Date expired (5.6.2009) |
||||||||
|
CEN |
EN 13034:2005+A1:2009 Protective clothing against liquid chemicals — Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
6.5.2010 |
EN 13034:2005 Note 2.1 |
Date expired (6.5.2010) |
||||||||
|
CEN |
EN 13061:2009 Protective clothing — Shin guards for association football players — Requirements and test methods |
6.5.2010 |
EN 13061:2001 Note 2.1 |
Date expired (6.5.2010) |
||||||||
|
CEN |
EN 13087-1:2000 Protective helmets — Test methods — Part 1: Conditions and conditioning |
10.8.2002 |
|
|
||||||||
|
|
EN 13087-1:2000/A1:2001 |
10.8.2002 |
Note 3 |
Date expired (10.8.2002) |
||||||||
|
CEN |
EN 13087-2:2012 Protective helmets — Test methods — Part 2: Shock absorption |
20.12.2012 |
EN 13087-2:2000 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 13087-3:2000 Protective helmets — Test methods — Part 3: Resistance to penetration |
10.8.2002 |
|
|
||||||||
|
|
EN 13087-3:2000/A1:2001 |
10.8.2002 |
Note 3 |
Date expired (10.8.2002) |
||||||||
|
CEN |
EN 13087-4:2012 Protective helmets — Test methods — Part 4: Retention system effectiveness |
20.12.2012 |
EN 13087-4:2000 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 13087-5:2012 Protective helmets — Test methods — Part 5: Retention system strength |
20.12.2012 |
EN 13087-5:2000 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 13087-6:2012 Protective helmets — Test methods — Part 6: Field of vision |
20.12.2012 |
EN 13087-6:2000 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 13087-7:2000 Protective helmets — Test methods — Part 7: Flame resistance |
10.8.2002 |
|
|
||||||||
|
|
EN 13087-7:2000/A1:2001 |
10.8.2002 |
Note 3 |
Date expired (10.8.2002) |
||||||||
|
CEN |
EN 13087-8:2000 Protective helmets — Test methods — Part 8: Electrical properties |
21.12.2001 |
|
|
||||||||
|
|
EN 13087-8:2000/A1:2005 |
6.10.2005 |
Note 3 |
Date expired (6.10.2005) |
||||||||
|
CEN |
EN 13087-10:2012 Protective helmets — Test methods — Part 10: Resistance to radiant heat |
20.12.2012 |
EN 13087-10:2000 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 13089:2011 Mountaineering equipment — Ice-tools — Safety requirements and test methods |
9.7.2011 |
|
|
||||||||
|
CEN |
EN 13138-1:2008 Buoyant aids for swimming instruction — Part 1: Safety requirements and test methods for buoyant aids to be worn |
5.6.2009 |
EN 13138-1:2003 Note 2.1 |
Date expired (5.6.2009) |
||||||||
|
CEN |
EN 13158:2009 Protective clothing — Protective jackets, body and shoulder protectors for equestrian use: For horse riders and those working with horses, and for horse drivers — Requirements and test methods |
6.5.2010 |
EN 13158:2000 Note 2.1 |
Date expired (6.5.2010) |
||||||||
|
CEN |
EN 13178:2000 Personal eye-protection — Eye protectors for snowmobile users |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 13274-1:2001 Respiratory protective devices — Methods of test — Part 1: Determination of inward leakage and total inward leakage |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 13274-2:2001 Respiratory protective devices — Methods of test — Part 2: Practical performance tests |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 13274-3:2001 Respiratory protective devices — Methods of test — Part 3: Determination of breathing resistance |
10.8.2002 |
|
|
||||||||
|
CEN |
EN 13274-4:2001 Respiratory protective devices — Methods of test — Part 4: Flame tests |
10.8.2002 |
|
|
||||||||
|
CEN |
EN 13274-5:2001 Respiratory protective devices — Methods of test — Part 5: Climatic conditions |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 13274-6:2001 Respiratory protective devices — Methods of test — Part 6: Determination of carbon dioxide content of the inhalation air |
10.8.2002 |
|
|
||||||||
|
CEN |
EN 13274-7:2008 Respiratory protective devices — Methods of test — Part 7: Determination of particle filter penetration |
20.6.2008 |
EN 13274-7:2002 Note 2.1 |
Date expired (31.7.2008) |
||||||||
|
CEN |
EN 13274-8:2002 Respiratory protective devices — Methods of test — Part 8: Determination of dolomite dust clogging |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13277-1:2000 Protective equipment for martial arts — Part 1: General requirements and test methods |
24.2.2001 |
|
|
||||||||
|
CEN |
EN 13277-2:2000 Protective equipment for martial arts — Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors |
24.2.2001 |
|
|
||||||||
|
CEN |
EN 13277-3:2013 Protective equipment for martial arts — Part 3: Additional requirements and test methods for trunk protectors |
11.4.2014 |
EN 13277-3:2000 Note 2.1 |
Date expired (30.6.2014) |
||||||||
|
CEN |
EN 13277-4:2001 Protective equipment for martial arts — Part 4: Additional requirements and test methods for head protectors |
10.8.2002 |
|
|
||||||||
|
|
EN 13277-4:2001/A1:2007 |
23.11.2007 |
Note 3 |
Date expired (31.12.2007) |
||||||||
|
CEN |
EN 13277-5:2002 Protective equipment for martial arts — Part 5: Additional requirements and test methods for genital protectors and abdominal protectors |
10.8.2002 |
|
|
||||||||
|
CEN |
EN 13277-6:2003 Protective equipment for martial arts — Part 6: Additional requirements and test methods for breast protectors for females |
21.2.2004 |
|
|
||||||||
|
CEN |
EN 13277-7:2009 Protective equipment for martial arts — Part 7: Additional requirements and test methods for hand and foot protectors |
6.5.2010 |
|
|
||||||||
|
CEN |
EN ISO 13287:2012 Personal protective equipment — Footwear — Test method for slip resistance (ISO 13287:2012) |
13.3.2013 |
EN ISO 13287:2007 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 13356:2001 Visibility accessories for non-professional use — Test methods and requirements |
21.12.2001 |
|
|
||||||||
|
CEN |
EN 13484:2012 Helmets for users of luges |
20.12.2012 |
EN 13484:2001 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 13546:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players — Requirements and test methods |
23.11.2007 |
EN 13546:2002 Note 2.1 |
Date expired (31.12.2007) |
||||||||
|
CEN |
EN 13567:2002+A1:2007 Protective clothing — Hand, arm, chest, abdomen, leg, genital and face protectors for fencers — Requirements and test methods |
23.11.2007 |
EN 13567:2002 Note 2.1 |
Date expired (31.12.2007) |
||||||||
|
CEN |
EN 13594:2015 Protective gloves for motorcycle riders — Requirements and test methods |
This is the first publication |
EN 13594:2002 Note 2.1 |
31.3.2016 |
||||||||
|
CEN |
EN 13595-1:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one piece or divided suits — Part 1: General requirements |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13595-2:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 2: Test method for determination of impact abrasion resistance |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13595-3:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 3: Test method for determination of burst strength |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13595-4:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 4: Test method for determination of impact cut resistance |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13634:2010 Protective footwear for motorcycle riders — Requirements and test methods |
9.7.2011 |
EN 13634:2002 Note 2.1 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN ISO 13688:2013 Protective clothing — General requirements (ISO 13688:2013) |
13.12.2013 |
EN 340:2003 Note 2.1 |
Date expired (31.1.2014) |
||||||||
|
CEN |
EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
20.12.2012 |
EN 13781:2001 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 13794:2002 Respiratory protective devices — Self-contained closed-circuit breathing apparatus for escape — Requirements, testing, marking |
28.8.2003 |
EN 1061:1996 EN 400:1993 EN 401:1993 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN 13819-1:2002 Hearing protectors — Testing — Part 1: Physical test methods |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13819-2:2002 Hearing protectors — Testing — Part 2: Acoustic test methods |
28.8.2003 |
|
|
||||||||
|
CEN |
EN 13832-1:2006 Footwear protecting against chemicals — Part 1: Terminology and test methods |
21.12.2006 |
|
|
||||||||
|
CEN |
EN 13832-2:2006 Footwear protecting against chemicals — Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
21.12.2006 |
|
|
||||||||
|
CEN |
EN 13832-3:2006 Footwear protecting against chemicals — Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
21.12.2006 |
|
|
||||||||
|
CEN |
EN 13911:2004 Protective clothing for firefighters — Requirements and test methods for fire hoods for firefighters |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 13921:2007 Personal protective equipment — Ergonomic principles |
23.11.2007 |
|
|
||||||||
|
CEN |
EN 13949:2003 Respiratory equipment — Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen — Requirements, testing, marking |
21.2.2004 |
|
|
||||||||
|
CEN |
EN ISO 13982-1:2004 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004) |
6.10.2005 |
|
|
||||||||
|
|
EN ISO 13982-1:2004/A1:2010 |
9.7.2011 |
Note 3 |
Date expired (9.7.2011) |
||||||||
|
CEN |
EN ISO 13982-2:2004 Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004) |
6.10.2005 |
|
|
||||||||
|
CEN |
EN ISO 13995:2000 Protective clothing — Mechanical properties — Test method for the determination of the resistance to puncture and dynamic tearing of materials (ISO 13995:2000) |
6.10.2005 |
|
|
||||||||
|
CEN |
EN ISO 13997:1999 Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects (ISO 13997:1999) |
4.7.2000 |
|
|
||||||||
|
|
EN ISO 13997:1999/AC:2000 |
|
|
|
||||||||
|
CEN |
EN ISO 13998:2003 Protective clothing — Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
28.8.2003 |
EN 412:1993 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris — Requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14052:2012+A1:2012 High performance industrial helmets |
20.12.2012 |
EN 14052:2012 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 14058:2004 Protective clothing — Garments for protection against cool environments |
6.10.2005 |
|
|
||||||||
|
CEN |
EN ISO 14116:2015 Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing (ISO 14116:2015) |
This is the first publication |
EN ISO 14116:2008 Note 2.1 |
31.1.2016 |
||||||||
|
CEN |
EN 14120:2003+A1:2007 Protective clothing — Wrist, palm, knee and elbow protectors for users of roller sports equipment — Requirements and test methods |
23.11.2007 |
EN 14120:2003 Note 2.1 |
Date expired (31.12.2007) |
||||||||
|
CEN |
EN 14126:2003 Protective clothing — Performance requirements and tests methods for protective clothing against infective agents |
6.10.2005 |
|
|
||||||||
|
|
EN 14126:2003/AC:2004 |
|
|
|
||||||||
|
CEN |
EN 14143:2013 Respiratory equipment — Self-contained re-breathing diving apparatus |
13.12.2013 |
EN 14143:2003 Note 2.1 |
Date expired (31.1.2014) |
||||||||
|
CEN |
EN 14225-1:2005 Diving suits — Part 1: Wet suits — Requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14225-2:2005 Diving suits — Part 2: Dry suits — Requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14225-3:2005 Diving suits — Part 3: Actively heated or cooled suits (systems) — Requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14225-4:2005 Diving suits — Part 4: One atmosphere suits (ADS) — Human factors requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14325:2004 Protective clothing against chemicals — Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14328:2005 Protective clothing — Gloves and armguards protecting against cuts by powered knives — Requirements and test methods |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14360:2004 Protective clothing against rain — Test method for ready made garments — Impact from above with high energy droplets |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14387:2004+A1:2008 Respiratory protective devices — Gas filter(s) and combined filter(s) — Requirements, testing, marking |
20.6.2008 |
EN 14387:2004 Note 2.1 |
Date expired (31.7.2008) |
||||||||
|
CEN |
EN 14404:2004+A1:2010 Personal protective equipment — Knee protectors for work in the kneeling position |
6.5.2010 |
EN 14404:2004 Note 2.1 |
Date expired (31.7.2010) |
||||||||
|
CEN |
EN 14435:2004 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only — Requirements, testing, marking |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 14458:2004 Personal eye-equipment — Faceshields and visors for use with firefighters’ and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
6.10.2005 |
|
|
||||||||
|
CEN |
EN ISO 14460:1999 Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods (ISO 14460:1999) |
16.3.2000 |
|
|
||||||||
|
|
EN ISO 14460:1999/AC:1999 |
|
|
|
||||||||
|
|
EN ISO 14460:1999/A1:2002 |
10.8.2002 |
Note 3 |
Date expired (30.9.2002) |
||||||||
|
CEN |
EN 14529:2005 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
19.4.2006 |
|
|
||||||||
|
CEN |
EN 14593-1:2005 Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 1: Apparatus with a full face mask — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 Note 2.1 |
Date expired (2.12.2005) |
||||||||
|
CEN |
EN 14593-2:2005 Respiratory protective devices — Compressed air line breathing apparatus with demand valve — Part 2: Apparatus with a half mask at positive pressure — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 Note 2.1 |
Date expired (2.12.2005) |
||||||||
|
|
EN 14593-2:2005/AC:2005 |
|
|
|
||||||||
|
CEN |
EN 14594:2005 Respiratory protective devices — Continuous flow compressed air line breathing apparatus — Requirements, testing, marking |
6.10.2005 |
EN 139:1994 EN 270:1994 EN 271:1995 EN 1835:1999 EN 12419:1999 Note 2.1 |
Date expired (2.12.2005) |
||||||||
|
|
EN 14594:2005/AC:2005 |
|
|
|
||||||||
|
CEN |
EN 14605:2005+A1:2009 Protective clothing against liquid chemicals — performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
6.5.2010 |
EN 14605:2005 Note 2.1 |
Date expired (6.5.2010) |
||||||||
|
CEN |
EN 14786:2006 Protective clothing — Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions — Atomizer test |
21.12.2006 |
|
|
||||||||
|
CEN |
EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
28.8.2003 |
|
|
||||||||
|
CEN |
EN ISO 15025:2002 Protective clothing — Protection against heat and flame — Method of test for limited flame spread (ISO 15025:2000) |
28.8.2003 |
EN 532:1994 Note 2.1 |
Date expired (28.8.2003) |
||||||||
|
CEN |
EN ISO 15027-1:2012 Immersion suits — Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
13.3.2013 |
EN ISO 15027-1:2002 Note 2.1 |
Date expired (31.5.2013) |
||||||||
|
CEN |
EN ISO 15027-2:2012 Immersion suits — Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
13.3.2013 |
EN ISO 15027-2:2002 Note 2.1 |
Date expired (31.5.2013) |
||||||||
|
CEN |
EN ISO 15027-3:2012 Immersion suits — Part 3: Test methods (ISO 15027-3:2012) |
13.3.2013 |
EN ISO 15027-3:2002 Note 2.1 |
Date expired (31.5.2013) |
||||||||
|
CEN |
EN 15090:2012 Footwear for firefighters |
20.12.2012 |
EN 15090:2006 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN 15151-1:2012 Mountaineering equipment — Braking devices — Part 1: Braking devices with manually assisted locking, safety requirements and test methods |
20.12.2012 |
|
|
||||||||
|
CEN |
EN 15333-1:2008 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 1: Demand apparatus |
20.6.2008 |
|
|
||||||||
|
|
EN 15333-1:2008/AC:2009 |
|
|
|
||||||||
|
CEN |
EN 15333-2:2009 Respiratory equipment — Open-circuit umbilical supplied compressed gas diving apparatus — Part 2: Free flow apparatus |
6.5.2010 |
|
|
||||||||
|
CEN |
EN 15613:2008 Knee and elbow protectors for indoor sports — Safety requirements and test methods |
5.6.2009 |
|
|
||||||||
|
CEN |
EN 15614:2007 Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland clothing |
23.11.2007 |
|
|
||||||||
|
CEN |
EN ISO 15831:2004 Clothing — Physiological effects — Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004) |
6.10.2005 |
|
|
||||||||
|
CEN |
EN 16027:2011 Protective clothing — Gloves with protective effect for association football goal keepers |
16.2.2012 |
|
|
||||||||
|
CEN |
EN 16350:2014 Protective gloves — Electrostatic properties |
12.12.2014 |
|
|
||||||||
|
CEN |
EN 16473:2014 Firefighters helmets — Helmets for technical rescue |
This is the first publication |
|
|
||||||||
|
CEN |
EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting (ISO 17249:2013) |
11.4.2014 |
EN ISO 17249:2004 Note 2.1 |
Date expired (30.11.2015) |
||||||||
|
|
EN ISO 17249:2013/AC:2014 |
|
|
|
||||||||
|
CEN |
EN ISO 17491-3:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008) |
28.1.2009 |
EN 463:1994 Note 2.1 |
Date expired (28.2.2009) |
||||||||
|
CEN |
EN ISO 17491-4:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008) |
28.1.2009 |
EN 468:1994 Note 2.1 |
Date expired (28.2.2009) |
||||||||
|
CEN |
EN ISO 20344:2011 Personal protective equipment — Test methods for footwear (ISO 20344:2011) |
16.2.2012 |
EN ISO 20344:2004 Note 2.1 |
Date expired (30.6.2012) |
||||||||
|
CEN |
EN ISO 20345:2011 Personal protective equipment — Safety footwear (ISO 20345:2011) |
16.2.2012 |
EN ISO 20345:2004 Note 2.1 |
Date expired (30.6.2013) |
||||||||
|
CEN |
EN ISO 20346:2014 Personal protective equipment — Protective footwear (ISO 20346:2014) |
12.12.2014 |
EN ISO 20346:2004 Note 2.1 |
Date expired (31.12.2014) |
||||||||
|
CEN |
EN ISO 20347:2012 Personal protective equipment — Occupational footwear (ISO 20347:2012) |
20.12.2012 |
EN ISO 20347:2004 Note 2.1 |
Date expired (30.4.2013) |
||||||||
|
CEN |
EN ISO 20349:2010 Personal protective equipment — Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding — Requirements and test method (ISO 20349:2010) |
9.7.2011 |
|
|
||||||||
|
CEN |
EN ISO 20471:2013 High visibility clothing — Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01) |
28.6.2013 |
EN 471:2003+A1:2007 Note 2.1 |
Date expired (30.9.2013) |
||||||||
|
CEN |
EN 24869-1:1992 Acoustics — Hearing protectors — Subjective method for the measurement of sound attenuation (ISO 4869-1:1990) |
16.12.1994 |
|
|
||||||||
|
Cenelec |
EN 50286:1999 Electrical insulating protective clothing for low-voltage installations |
16.3.2000 |
|
|
||||||||
|
Cenelec |
EN 50321:1999 Electrically insulating footwear for working on low voltage installations |
16.3.2000 |
|
|
||||||||
|
Cenelec |
EN 50365:2002 Electrically insulating helmets for use on low voltage installations |
10.4.2003 |
|
|
||||||||
|
Cenelec |
EN 60743:2001 Live working — Terminology for tools, equipment and devices IEC 60743:2001 |
10.4.2003 |
EN 60743:1996 Note 2.1 |
Date expired (1.12.2004) |
||||||||
|
|
EN 60743:2001/A1:2008 IEC 60743:2001/A1:2008 |
9.7.2011 |
Note 3 |
Date expired (9.7.2011) |
||||||||
|
Cenelec |
EN 60895:2003 Live working — Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. IEC IEC 60895:2002 (Modified) |
6.10.2005 |
EN 60895:1996 Note 2.1 |
Date expired (1.7.2006) |
||||||||
|
Cenelec |
EN 60903:2003 Live working — Gloves of insulating material IEC IEC 60903:2002 (Modified) |
6.10.2005 |
EN 60903:1992 + A11:1997 EN 50237:1997 Note 2.1 |
Date expired (1.7.2006) |
||||||||
|
Cenelec |
EN 60984:1992 Sleeves of insulating material for live working IEC 60984:1990 (Modified) |
4.6.1999 |
|
|
||||||||
|
|
EN 60984:1992/A11:1997 |
4.6.1999 |
Note 3 |
Date expired (4.6.1999) |
||||||||
|
|
EN 60984:1992/A1:2002 IEC 60984:1990/A1:2002 |
10.4.2003 |
Note 3 |
Date expired (6.10.2005) |
||||||||
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘.../AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at: http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
|
11.12.2015 |
EN |
Official Journal of the European Union |
C 412/44 |
Commission communication in the framework of the implementation of the Directive 2000/9/EC of the European Parliament and of the Council of 20 March 2000 relating to cableway installations designed to carry persons
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
(2015/C 412/04)
|
ESO (1) |
Reference and title of the standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 1709:2004 Safety requirements for cableway installations designed to carry persons — Precommissioning inspection, maintenance, operational inspection and checks |
26.4.2005 |
|
|
|
CEN |
EN 1908:2015 Safety requirements of cableway installations designed to carry persons — Tensioning devices |
This is the first publication |
EN 1908:2004 Note 2.1 |
19.5.2016 |
|
CEN |
EN 1909:2004 Safety requirements for cableway installations designed to carry persons — Recovery and evacuation |
26.4.2005 |
|
|
|
CEN |
EN 12385-8:2002 Steel wire ropes — Safety — Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
24.4.2003 |
|
|
|
CEN |
EN 12385-9:2002 Steel wire ropes — Safety — Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
24.4.2003 |
|
|
|
CEN |
EN 12397:2004 Safety requirements for cableway installations designed to carry persons — Operation |
26.4.2005 |
|
|
|
CEN |
EN 12927-1:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 1: Selection criteria for ropes and their end fixings |
26.4.2005 |
|
|
|
CEN |
EN 12927-2:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 2: Safety factors |
26.4.2005 |
|
|
|
CEN |
EN 12927-3:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
26.4.2005 |
|
|
|
CEN |
EN 12927-4:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 4: End fixings |
26.4.2005 |
|
|
|
CEN |
EN 12927-5:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 5: Storage, transportation, installation and tensioning |
26.4.2005 |
|
|
|
CEN |
EN 12927-6:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 6: Discard criteria |
26.4.2005 |
|
|
|
CEN |
EN 12927-7:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 7: Inspection, repair and maintenance |
26.4.2005 |
|
|
|
CEN |
EN 12927-8:2004 Safety requirements for cableway installations designed to carry persons — Ropes — Part 8: Magnetic rope testing (MRT) |
26.4.2005 |
|
|
|
CEN |
EN 12929-1:2015 Safety requirements for cableway installations designed to carry persons — General requirements — Part 1: Requirements for all installations |
14.8.2015 |
EN 12929-1:2004 Note 2.1 |
31.1.2016 |
|
CEN |
EN 12929-2:2015 Safety requirements for cableway installations designed to carry persons — General requirements — Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
14.8.2015 |
EN 12929-2:2004 Note 2.1 |
31.1.2016 |
|
CEN |
EN 12930:2015 Safety requirements for cableway installations designed to carry persons — Calculations |
14.8.2015 |
EN 12930:2004 Note 2.1 |
31.1.2016 |
|
CEN |
EN 13107:2015 Safety requirements for cableway installations designed to carry persons — Civil engineering works |
This is the first publication |
EN 13107:2004 Note 2.1 |
19.5.2016 |
|
CEN |
EN 13223:2015 Safety requirements for cableway installations designed to carry persons — Drive systems and other mechanical equipment |
This is the first publication |
EN 13223:2004 Note 2.1 |
19.5.2016 |
|
CEN |
EN 13243:2015 Safety requirements for cableway installations designed to carry persons — Electrical equipment other than for drive systems |
14.8.2015 |
EN 13243:2004 Note 2.1 |
31.1.2016 |
|
CEN |
EN 13796-1:2005 Safety requirements for cableway installations designed to carry persons — Carriers — Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
20.9.2005 |
|
|
|
|
EN 13796-1:2005/AC:2007 |
|
|
|
|
CEN |
EN 13796-2:2005 Safety requirements for cableway installations designed to carry persons — Carriers — Part 2: Slipping resistance test for grips |
20.9.2005 |
|
|
|
CEN |
EN 13796-3:2005 Safety requirements for cableway installations designed to carry persons — Carriers — Part 3: Fatigue tests |
20.9.2005 |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘.../AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.