ISSN 1977-091X
Official Journal
of the European Union
C 149
English edition
Information and Notices
Volume 57
16 May 2014
|
ISSN 1977-091X |
||
|
Official Journal of the European Union |
C 149 |
|
|
|
||
|
English edition |
Information and Notices |
Volume 57 |
|
|
|
|
|
(1) Text with EEA relevance |
|
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
|
16.5.2014 |
EN |
Official Journal of the European Union |
C 149/1 |
Commission Communication in the framework of the implementation of Commission Regulation (EU) No 932/2012 of 3 October 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for household tumble driers and of Commission Delegated Regulation (EU) No 392/2012 of 1 March 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of household tumble driers
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
2014/C 149/01
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
Cenelec |
EN 60704-2-6:2012 Household and similar electrical appliances — Test code for the determination of airborne acoustical noise — Part 2-6: Particular requirements for tumble dryers IEC 60704-2-6:2012 |
This is the first publication |
|
|
|
Clause 1.101 on standard deviation for declaration and verification is not part of the present citation. |
||||
|
Cenelec |
EN 61121:2013 Tumble dryers for household use — Methods for measuring the performance IEC 61121:2012 (Modified) |
3.12.2013 |
|
|
|
Clause ZB on tolerances and control procedures is not part of the present citation. |
||||
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No1025/2012. (2) |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘.../AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
|
16.5.2014 |
EN |
Official Journal of the European Union |
C 149/3 |
Commission communication in the framework of the implementation of the Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
2014/C 149/02
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN 285:2006+A2:2009 Sterilization — Steam sterilizers — Large sterilizers |
2.12.2009 |
EN 285:2006+A1:2008 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 455-1:2000 Medical gloves for single use — Part 1: Requirements and testing for freedom from holes |
30.9.2005 |
EN 455-1:1993 Note 2.1 |
Date expired (30.4.2001) |
|
CEN |
EN 455-2:2009+A2:2013 Medical gloves for single use — Part 2: Requirements and testing for physical properties |
This is the first publication |
EN 455-2:2009+A1:2011 Note 2.1 |
31.10.2014 |
|
CEN |
EN 455-3:2006 Medical gloves for single use — Part 3: Requirements and testing for biological evaluation |
9.8.2007 |
EN 455-3:1999 Note 2.1 |
Date expired (30.6.2007) |
|
CEN |
EN 455-4:2009 Medical gloves for single use — Part 4: Requirements and testing for shelf life determination |
7.7.2010 |
|
|
|
CEN |
EN 556-1:2001 Sterilization of medical devices — Requirements for medical devices to be designated ‘STERILE’ — Part 1: Requirements for terminally sterilized medical devices |
31.7.2002 |
EN 556:1994 + A1:1998 Note 2.1 |
Date expired (30.4.2002) |
|
|
EN 556-1:2001/AC:2006 |
15.11.2006 |
|
|
|
CEN |
EN 556-2:2003 Sterilization of medical devices — Requirements for medical devices to be designated ‘STERILE’ — Part 2: Requirements for aseptically processed medical devices |
9.8.2007 |
|
|
|
CEN |
EN 794-3:1998+A2:2009 Lung ventilators — Part 3: Particular requirements for emergency and transport ventilators |
7.7.2010 |
EN 794-3:1998 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 980:2008 Symbols for use in the labelling of medical devices |
23.7.2008 |
EN 980:2003 Note 2.1 |
Date expired (31.5.2010) |
|
CEN |
EN 1041:2008 Information supplied by the manufacturer of medical devices |
19.2.2009 |
EN 1041:1998 Note 2.1 |
Date expired (31.8.2011) |
|
CEN |
EN 1060-3:1997+A2:2009 Non-invasive sphygmomanometers — Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems |
7.7.2010 |
EN 1060-3:1997 Note 2.1 |
Date expired (31.5.2010) |
|
CEN |
EN 1060-4:2004 Non-invasive sphygmomanometers — Part 4: Test procedures to determine the overall system accuracy of automated non-invasive sphygmomanometers |
30.9.2005 |
|
|
|
CEN |
EN ISO 1135-4:2011 Transfusion equipment for medical use — Part 4: Transfusion sets for single use (ISO 1135-4:2010) |
27.4.2012 |
EN ISO 1135-4:2010 Note 2.1 |
Date expired (30.4.2012) |
|
CEN |
EN 1282-2:2005+A1:2009 Tracheostomy tubes — Part 2: Paediatric tubes (ISO 5366-3:2001, modified) |
7.7.2010 |
EN 1282-2:2005 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 1422:1997+A1:2009 Sterilizers for medical purposes — Ethylene oxide sterilizers — Requirements and test methods |
2.12.2009 |
EN 1422:1997 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 1618:1997 Catheters other than intravascular catheters — Test methods for common properties |
9.5.1998 |
|
|
|
CEN |
EN 1639:2009 Dentistry — Medical devices for dentistry — Instruments |
7.7.2010 |
EN 1639:2004 Note 2.1 |
Date expired (30.4.2010) |
|
CEN |
EN 1640:2009 Dentistry — Medical devices for dentistry — Equipment |
7.7.2010 |
EN 1640:2004 Note 2.1 |
Date expired (30.4.2010) |
|
CEN |
EN 1641:2009 Dentistry — Medical devices for dentistry — Materials |
7.7.2010 |
EN 1641:2004 Note 2.1 |
Date expired (30.4.2010) |
|
CEN |
EN 1642:2011 Dentistry — Medical devices for dentistry — Dental implants |
27.4.2012 |
EN 1642:2009 Note 2.1 |
Date expired (30.4.2012) |
|
CEN |
EN 1707:1996 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment — Lock fittings |
17.5.1997 |
|
|
|
CEN |
EN 1782:1998+A1:2009 Tracheal tubes and connectors |
7.7.2010 |
EN 1782:1998 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 1789:2007+A1:2010 Medical vehicles and their equipment — Road ambulances |
18.1.2011 |
|
|
|
CEN |
EN 1820:2005+A1:2009 Anaesthetic reservoir bags (ISO 5362:2000, modified) |
7.7.2010 |
EN 1820:2005 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 1865-3:2012 Patient handling equipment used in road ambulances — Part 3: Heavy duty stretcher |
30.8.2012 |
EN 1865:1999 Note 2.1 |
Date expired (31.12.2012) |
|
CEN |
EN 1865-4:2012 Patient handling equipment used in road ambulances — Part 4: Foldable patient transfer chair |
30.8.2012 |
EN 1865:1999 Note 2.1 |
Date expired (31.10.2012) |
|
CEN |
EN 1865-5:2012 Patient handling equipment used in road ambulances — Part 5: Stretcher support |
30.8.2012 |
EN 1865:1999 Note 2.1 |
Date expired (31.12.2012) |
|
CEN |
EN 1985:1998 Walking aids — General requirements and test methods |
10.8.1999 |
|
|
|
This standard still needs to be amended to take into account the requirements introduced by Directive 2007/47/EC. The amended standard will be published by CEN as soon as possible. Manufacturers are advised to check whether all relevant Essential Requirements of the amended directive are appropriately covered. |
||||
|
CEN |
EN ISO 3826-2:2008 Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on labels and instruction leaflets (ISO 3826-2:2008) |
19.2.2009 |
|
|
|
CEN |
EN ISO 3826-3:2007 Plastics collapsible containers for human blood and blood components — Part 3: Blood bag systems with integrated features (ISO 3826-3:2006) |
27.2.2008 |
|
|
|
CEN |
EN ISO 4074:2002 Natural latex rubber condoms — Requirements and test methods (ISO 4074:2002) |
31.7.2002 |
EN 600:1996 Note 2.1 |
Date expired (31.8.2005) |
|
|
EN ISO 4074:2002/AC:2008 |
2.12.2009 |
|
|
|
CEN |
EN ISO 4135:2001 Anaesthetic and respiratory equipment — Vocabulary (ISO 4135:2001) |
31.7.2002 |
EN ISO 4135:1996 Note 2.1 |
Date expired (28.2.2002) |
|
CEN |
EN ISO 5356-1:2004 Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets (ISO 5356-1:2004) |
30.9.2005 |
EN 1281-1:1997 Note 2.1 |
Date expired (30.11.2004) |
|
CEN |
EN ISO 5359:2008 Low-pressure hose assemblies for use with medical gases (ISO 5359:2008) |
23.7.2008 |
EN 739:1998 Note 2.1 |
Date expired (30.6.2010) |
|
|
EN ISO 5359:2008/A1:2011 |
30.8.2012 |
Note 3 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 5360:2009 Anaesthetic vaporizers — Agent-specific filling systems (ISO 5360:2006) |
2.12.2009 |
EN ISO 5360:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 5366-1:2009 Anaesthetic and respiratory equipment — Tracheostomy tubes — Part 1: Tubes and connectors for use in adults (ISO 5366-1:2000) |
2.12.2009 |
EN ISO 5366-1:2004 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 5840:2009 Cardiovascular implants — Cardiac valve prostheses (ISO 5840:2005) |
2.12.2009 |
EN ISO 5840:2005 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 7197:2009 Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components (ISO 7197:2006, including Cor 1:2007) |
2.12.2009 |
EN ISO 7197:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 7376:2009 Anaesthetic and respiratory equipment — Laryngoscopes for tracheal intubation (ISO 7376:2009) |
2.12.2009 |
EN ISO 7376:2009 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 7396-1:2007 Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2007) |
9.8.2007 |
EN 737-3:1998 Note 2.1 |
Date expired (30.4.2009) |
|
|
EN ISO 7396-1:2007/A1:2010 |
7.7.2010 |
Note 3 |
Date expired (31.7.2010) |
|
|
EN ISO 7396-1:2007/A2:2010 |
7.7.2010 |
Note 3 |
Date expired (31.8.2010) |
|
CEN |
EN ISO 7396-2:2007 Medical gas pipeline systems — Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007) |
9.8.2007 |
EN 737-2:1998 Note 2.1 |
Date expired (30.4.2009) |
|
CEN |
EN ISO 7886-3:2009 Sterile hypodermic syringes for single use — Part 3: Auto-disable syringes for fixed-dose immunization (ISO 7886-3:2005) |
7.7.2010 |
EN ISO 7886-3:2005 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 7886-4:2009 Sterile hypodermic syringes for single use — Part 4: Syringes with re-use prevention feature (ISO 7886-4:2006) |
7.7.2010 |
EN ISO 7886-4:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 8185:2009 Respiratory tract humidifiers for medical use — Particular requirements for respiratory humidification systems (ISO 8185:2007) |
2.12.2009 |
EN ISO 8185:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 8359:2009 Oxygen concentrators for medical use — Safety requirements (ISO 8359:1996) |
2.12.2009 |
EN ISO 8359:1996 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 8835-2:2009 Inhalational anaesthesia systems — Part 2: Anaesthetic breathing systems (ISO 8835-2:2007) |
2.12.2009 |
EN ISO 8835-2:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 8835-3:2009 Inhalational anaesthesia systems — Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems (ISO 8835-3:2007) |
2.12.2009 |
EN ISO 8835-3:2007 Note 2.1 |
Date expired (21.3.2010) |
|
|
EN ISO 8835-3:2009/A1:2010 |
13.5.2011 |
Note 3 |
Date expired (30.4.2011) |
|
CEN |
EN ISO 8835-4:2009 Inhalational anaesthesia systems — Part 4: Anaesthetic vapour delivery devices (ISO 8835-4:2004) |
2.12.2009 |
EN ISO 8835-4:2004 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 8835-5:2009 Inhalational anaesthesia systems — Part 5: Anaesthetic ventilators (ISO 8835-5:2004) |
2.12.2009 |
EN ISO 8835-5:2004 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 9170-1:2008 Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2008) |
19.2.2009 |
EN 737-1:1998 Note 2.1 |
Date expired (31.7.2010) |
|
CEN |
EN ISO 9170-2:2008 Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008) |
19.2.2009 |
EN 737-4:1998 Note 2.1 |
Date expired (31.7.2010) |
|
CEN |
EN ISO 9360-1:2009 Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000) |
2.12.2009 |
EN ISO 9360-1:2000 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 9360-2:2009 Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml (ISO 9360-2:2001) |
2.12.2009 |
EN ISO 9360-2:2002 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 9713:2009 Neurosurgical implants — Self-closing intracranial aneurysm clips (ISO 9713:2002) |
2.12.2009 |
EN ISO 9713:2004 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10079-1:2009 Medical suction equipment — Part 1: Electrically powered suction equipment — Safety requirements (ISO 10079-1:1999) |
2.12.2009 |
EN ISO 10079-1:1999 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10079-2:2009 Medical suction equipment — Part 2: Manually powered suction equipment (ISO 10079-2:1999) |
2.12.2009 |
EN ISO 10079-2:1999 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10079-3:2009 Medical suction equipment — Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999) |
2.12.2009 |
EN ISO 10079-3:1999 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10328:2006 Prosthetics — Structural testing of lower-limb prostheses — Requirements and test methods (ISO 10328:2006) |
9.8.2007 |
|
|
|
This standard still needs to be amended to take into account the requirements introduced by Directive 2007/47/EC. The amended standard will be published by CEN as soon as possible. Manufacturers are advised to check whether all relevant Essential Requirements of the amended directive are appropriately covered. |
||||
|
CEN |
EN ISO 10524-1:2006 Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006) |
2.6.2006 |
EN 738-1:1997 Note 2.1 |
Date expired (31.10.2008) |
|
CEN |
EN ISO 10524-2:2006 Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators (ISO 10524-2:2005) |
7.6.2009 |
EN 738-2:1998 Note 2.1 |
Date expired (31.10.2008) |
|
CEN |
EN ISO 10524-3:2006 Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005) |
7.9.2006 |
EN 738-3:1998 Note 2.1 |
Date expired (31.10.2008) |
|
CEN |
EN ISO 10524-4:2008 Pressure regulators for use with medical gases — Part 4: Low-pressure regulators (ISO 10524-4:2008) |
23.7.2008 |
EN 738-4:1998 Note 2.1 |
Date expired (30.6.2010) |
|
CEN |
EN ISO 10535:2006 Hoists for the transfer of disabled persons — Requirements and test methods (ISO 10535:2006) |
9.8.2007 |
EN ISO 10535:1998 Note 2.1 |
Date expired (30.6.2007) |
|
This standard still needs to be amended to take into account the requirements introduced by Directive 2007/47/EC. The amended standard will be published by CEN as soon as possible. Manufacturers are advised to check whether all relevant Essential Requirements of the amended directive are appropriately covered. |
||||
|
CEN |
EN ISO 10555-1:2009 Sterile, single-use intravascular catheters — Part 1: General requirements (ISO 10555-1:1995, including Amd 1:1999 and Amd 2:2004) |
2.12.2009 |
EN ISO 10555-1:1996 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10651-2:2009 Lung ventilators for medical use — Particular requirements for basic safety and essential performance — Part 2: Home care ventilators for ventilator-dependent patients (ISO 10651-2:2004) |
2.12.2009 |
EN ISO 10651-2:2004 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10651-4:2009 Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002) |
2.12.2009 |
EN ISO 10651-4:2002 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10651-6:2009 Lung ventilators for medical use — Particular requirements for basic safety and essential performance — Part 6: Home-care ventilatory support devices (ISO 10651-6:2004) |
2.12.2009 |
EN ISO 10651-6:2004 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10993-1:2009 Biological evaluation of medical devices — Part 1: Evaluation and testing within a risk management process (ISO 10993-1:2009) |
2.12.2009 |
EN ISO 10993-1:2009 Note 2.1 |
Date expired (21.3.2010) |
|
|
EN ISO 10993-1:2009/AC:2010 |
18.1.2011 |
|
|
|
CEN |
EN ISO 10993-3:2009 Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2003) |
2.12.2009 |
EN ISO 10993-3:2003 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10993-4:2009 Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood (ISO 10993-4:2002, including Amd 1:2006) |
2.12.2009 |
EN ISO 10993-4:2002 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10993-5:2009 Biological evaluation of medical devices — Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009) |
2.12.2009 |
EN ISO 10993-5:1999 Note 2.1 |
Date expired (31.12.2009) |
|
CEN |
EN ISO 10993-6:2009 Biological evaluation of medical devices — Part 6: Tests for local effects after implantation (ISO 10993-6:2007) |
2.12.2009 |
EN ISO 10993-6:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10993-7:2008 Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals (ISO 10993-7:2008) |
19.2.2009 |
|
|
|
|
EN ISO 10993-7:2008/AC:2009 |
7.7.2010 |
|
|
|
CEN |
EN ISO 10993-9:2009 Biological evaluation of medical devices — Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009) |
2.12.2009 |
EN ISO 10993-9:2009 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10993-11:2009 Biological evaluation of medical devices — Part 11: Tests for systemic toxicity (ISO 10993-11:2006) |
2.12.2009 |
EN ISO 10993-11:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10993-12:2012 Biological evaluation of medical devices — Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
24.1.2013 |
EN ISO 10993-12:2009 Note 2.1 |
Date expired (31.1.2013) |
|
CEN |
EN ISO 10993-13:2010 Biological evaluation of medical devices — Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:2010) |
18.1.2011 |
EN ISO 10993-13:2009 Note 2.1 |
Date expired (31.12.2010) |
|
CEN |
EN ISO 10993-14:2009 Biological evaluation of medical devices — Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001) |
2.12.2009 |
EN ISO 10993-14:2001 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10993-15:2009 Biological evaluation of medical devices — Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000) |
2.12.2009 |
EN ISO 10993-15:2000 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10993-16:2010 Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:2010) |
7.7.2010 |
EN ISO 10993-16:2009 Note 2.1 |
Date expired (31.8.2010) |
|
CEN |
EN ISO 10993-17:2009 Biological evaluation of medical devices — Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002) |
2.12.2009 |
EN ISO 10993-17:2002 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 10993-18:2009 Biological evaluation of medical devices — Part 18: Chemical characterization of materials (ISO 10993-18:2005) |
2.12.2009 |
EN ISO 10993-18:2005 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 11135-1:2007 Sterilization of health care products — Ethylene oxide — Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) |
9.8.2007 |
EN 550:1994 Note 2.1 |
Date expired (31.5.2010) |
|
CEN |
EN ISO 11137-1:2006 Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006) |
7.9.2006 |
EN 552:1994 Note 2.1 |
Date expired (30.4.2009) |
|
|
EN ISO 11137-1:2006/A1:2013 |
This is the first publication |
Note 3 |
30.11.2014 |
|
CEN |
EN ISO 11137-2:2013 Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
This is the first publication |
EN ISO 11137-2:2012 Note 2.1 |
30.11.2014 |
|
CEN |
EN ISO 11138-2:2009 Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization processes (ISO 11138-2:2006) |
2.12.2009 |
EN ISO 11138-2:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 11138-3:2009 Sterilization of health care products — Biological indicators — Part 3: Biological indicators for moist heat sterilization processes (ISO 11138-3:2006) |
2.12.2009 |
EN ISO 11138-3:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 11140-1:2009 Sterilization of health care products — Chemical indicators — Part 1: General requirements (ISO 11140-1:2005) |
2.12.2009 |
EN ISO 11140-1:2005 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 11140-3:2009 Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007, including Cor 1:2007) |
2.12.2009 |
EN ISO 11140-3:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 11197:2009 Medical supply units (ISO 11197:2004) |
2.12.2009 |
EN ISO 11197:2004 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 11607-1:2009 Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006) |
2.12.2009 |
EN ISO 11607-1:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 11607-2:2006 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006) |
7.9.2006 |
|
|
|
CEN |
EN ISO 11737-1:2006 Sterilization of medical devices — Microbiological methods — Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2006) |
7.9.2006 |
EN 1174-2:1996 EN 1174-1:1996 EN 1174-3:1996 Note 2.1 |
Date expired (31.10.2006) |
|
|
EN ISO 11737-1:2006/AC:2009 |
2.12.2009 |
|
|
|
CEN |
EN ISO 11737-2:2009 Sterilization of medical devices — Microbiological methods — Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
7.7.2010 |
|
|
|
CEN |
EN ISO 11810-1:2009 Lasers and laser-related equipment — Test method and classification for the laser resistance of surgical drapes and/or patient protective covers — Part 1: Primary ignition and penetration (ISO 11810-1:2005) |
2.12.2009 |
|
|
|
CEN |
EN ISO 11810-2:2009 Lasers and laser-related equipment — Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers — Part 2: Secondary ignition (ISO 11810-2:2007) |
2.12.2009 |
EN ISO 11810-2:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 11979-8:2009 Ophthalmic implants — Intraocular lenses — Part 8: Fundamental requirements (ISO 11979-8:2006) |
2.12.2009 |
EN ISO 11979-8:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 12006-2:1998+A1:2009 Non active surgical implants — Particular requirements for cardiac and vascular implants — Part 2: Vascular prostheses including cardiac valve conduits |
2.12.2009 |
EN 12006-2:1998 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 12006-3:1998+A1:2009 Non active surgical implants — Particular requirements for cardiac and vascular implants — Part 3: Endovascular devices |
2.12.2009 |
EN 12006-3:1998 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 12183:2009 Manual wheelchairs — Requirements and test methods |
7.7.2010 |
|
|
|
CEN |
EN 12184:2009 Electrically powered wheelchairs, scooters and their chargers — Requirements and test methods |
7.7.2010 |
|
|
|
CEN |
EN 12342:1998+A1:2009 Breathing tubes intended for use with anaesthetic apparatus and ventilators |
7.7.2010 |
EN 12342:1998 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 12470-1:2000+A1:2009 Clinical thermometers — Part 1: Metallic liquid-in-glass thermometers with maximum device |
2.12.2009 |
EN 12470-1:2000 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 12470-2:2000+A1:2009 Clinical thermometers — Part 2: Phase change type (dot matrix) thermometers |
2.12.2009 |
EN 12470-2:2000 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 12470-3:2000+A1:2009 Clinical thermometers — Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device |
2.12.2009 |
EN 12470-3:2000 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 12470-4:2000+A1:2009 Clinical thermometers — Part 4: Performance of electrical thermometers for continuous measurement |
2.12.2009 |
EN 12470-4:2000 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 12470-5:2003 Clinical thermometers — Part 5: Performance of infra-red ear thermometers (with maximum device) |
7.11.2003 |
|
|
|
This standard still needs to be amended to take into account the requirements introduced by Directive 2007/47/EC. The amended standard will be published by CEN as soon as possible. Manufacturers are advised to check whether all relevant Essential Requirements of the amended directive are appropriately covered. |
||||
|
CEN |
EN ISO 12870:2009 Ophthalmic optics — Spectacle frames — Requirements and test methods (ISO 12870:2004) |
2.12.2009 |
EN ISO 12870:2004 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 13060:2004+A2:2010 Small steam sterilizers |
7.7.2010 |
EN 13060:2004+A1:2009 Note 2.1 |
Date expired (30.9.2010) |
|
CEN |
EN ISO 13408-1:2011 Aseptic processing of health care products — Part 1: General requirements (ISO 13408-1:2008) |
19.8.2011 |
EN 13824:2004 Note 2.1 |
Date expired (31.12.2011) |
|
|
EN ISO 13408-1:2011/A1:2013 |
This is the first publication |
Note 3 |
30.11.2014 |
|
CEN |
EN ISO 13408-2:2011 Aseptic processing of health care products — Part 2: Filtration (ISO 13408-2:2003) |
19.8.2011 |
EN 13824:2004 Note 2.1 |
Date expired (31.12.2011) |
|
CEN |
EN ISO 13408-3:2011 Aseptic processing of health care products — Part 3: Lyophilization (ISO 13408-3:2006) |
19.8.2011 |
EN 13824:2004 Note 2.1 |
Date expired (31.12.2011) |
|
CEN |
EN ISO 13408-4:2011 Aseptic processing of health care products — Part 4: Clean-in-place technologies (ISO 13408-4:2005) |
19.8.2011 |
EN 13824:2004 Note 2.1 |
Date expired (31.12.2011) |
|
CEN |
EN ISO 13408-5:2011 Aseptic processing of health care products — Part 5: Sterilization in place (ISO 13408-5:2006) |
19.8.2011 |
EN 13824:2004 Note 2.1 |
Date expired (31.12.2011) |
|
CEN |
EN ISO 13408-6:2011 Aseptic processing of health care products — Part 6: Isolator systems (ISO 13408-6:2005) |
19.8.2011 |
EN 13824:2004 Note 2.1 |
Date expired (31.12.2011) |
|
CEN |
EN ISO 13485:2012 Medical devices — Quality management systems — Requirements for regulatory purposes (ISO 13485:2003) |
30.8.2012 |
EN ISO 13485:2003 Note 2.1 |
Date expired (31.8.2012) |
|
|
EN ISO 13485:2012/AC:2012 |
30.8.2012 |
|
|
|
CEN |
EN 13544-1:2007+A1:2009 Respiratory therapy equipment — Part 1: Nebulizing systems and their components |
7.7.2010 |
EN 13544-1:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 13544-2:2002+A1:2009 Respiratory therapy equipment — Part 2: Tubing and connectors |
7.7.2010 |
EN 13544-2:2002 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 13544-3:2001+A1:2009 Respiratory therapy equipment — Part 3: Air entrainment devices |
7.7.2010 |
EN 13544-3:2001 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 13624:2003 Chemical disinfectants and antiseptics — Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants for instruments used in the medical area — Test method and requirements (phase 2, step 1) |
30.9.2005 |
|
|
|
CEN |
EN 13718-1:2008 Medical vehicles and their equipment — Air ambulances — Part 1: Requirements for medical devices used in air ambulances |
19.2.2009 |
EN 13718-1:2002 Note 2.1 |
Date expired (28.2.2009) |
|
CEN |
EN 13726-1:2002 Test methods for primary wound dressings — Part 1: Aspects of absorbency |
27.3.2003 |
|
|
|
|
EN 13726-1:2002/AC:2003 |
2.12.2009 |
|
|
|
CEN |
EN 13726-2:2002 Test methods for primary wound dressings — Part 2: Moisture vapour transmission rate of permeable film dressings |
27.3.2003 |
|
|
|
CEN |
EN 13727:2012 Chemical disinfectants and antiseptics — Quantitative suspension test for the evaluation of bactericidal activity in the medical area — Test method and requirements (phase 2, step 1) |
30.8.2012 |
EN 13727:2003 Note 2.1 |
Date expired (30.11.2012) |
|
CEN |
EN 13867:2002+A1:2009 Concentrates for haemodialysis and related therapies |
2.12.2009 |
EN 13867:2002 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 13976-1:2011 Rescue systems — Transportation of incubators — Part 1: Interface conditions |
19.8.2011 |
EN 13976-1:2003 Note 2.1 |
Date expired (30.11.2011) |
|
CEN |
EN 13976-2:2011 Rescue systems — Transportation of incubators — Part 2: System requirements |
19.8.2011 |
EN 13976-2:2003 Note 2.1 |
Date expired (30.11.2011) |
|
CEN |
EN 14079:2003 Non-active medical devices — Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze |
30.9.2005 |
|
|
|
CEN |
EN 14139:2010 Ophthalmic optics — Specifications for ready-to-wear spectacles |
18.1.2011 |
|
|
|
CEN |
EN ISO 14155:2011 Clinical investigation of medical devices for human subjects — Good clinical practice (ISO 14155:2011) |
27.4.2012 |
EN ISO 14155:2011 Note 2.1 |
Date expired (30.4.2012) |
|
CEN |
EN 14180:2003+A2:2009 Sterilizers for medical purposes — Low temperature steam and formaldehyde sterilizers — Requirements and testing |
7.7.2010 |
EN 14180:2003+A1:2009 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 14348:2005 Chemical disinfectants and antiseptics — Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants — Test methods and requirements (phase 2, step 1) |
30.9.2005 |
|
|
|
CEN |
EN ISO 14408:2009 Tracheal tubes designed for laser surgery — Requirements for marking and accompanying information (ISO 14408:2005) |
2.12.2009 |
EN ISO 14408:2005 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 14561:2006 Chemical disinfectants and antiseptics — Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area — Test method and requirements (phase 2, step 2) |
15.11.2006 |
|
|
|
CEN |
EN 14562:2006 Chemical disinfectants and antiseptics — Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area — Test method and requirements (phase 2, step 2) |
15.11.2006 |
|
|
|
CEN |
EN 14563:2008 Chemical disinfectants and antiseptics — Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments in the medical area — Test method and requirements (phase 2, step 2) |
19.2.2009 |
|
|
|
CEN |
EN ISO 14602:2011 Non-active surgical implants — Implants for osteosynthesis — Particular requirements (ISO 14602:2010) |
27.4.2012 |
EN ISO 14602:2010 Note 2.1 |
Date expired (30.4.2012) |
|
CEN |
EN ISO 14607:2009 Non-active surgical implants — Mammary implants — Particular requirements (ISO 14607:2007) |
2.12.2009 |
EN ISO 14607:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 14630:2009 Non-active surgical implants — General requirements (ISO 14630:2008) |
2.12.2009 |
EN ISO 14630:2008 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 14683:2005 Surgical masks — Requirements and test methods |
2.6.2006 |
|
|
|
CEN |
EN ISO 14889:2009 Ophthalmic optics — Spectacle lenses — Fundamental requirements for uncut finished lenses (ISO 14889:2003) |
2.12.2009 |
EN ISO 14889:2003 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 14931:2006 Pressure vessels for human occupancy (PVHO) — Multi-place pressure chamber systems for hyperbaric therapy — Performance, safety requirements and testing |
15.11.2006 |
|
|
|
CEN |
EN ISO 14937:2009 Sterilization of health care products — General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
7.7.2010 |
EN ISO 14937:2000 Note 2.1 |
Date expired (30.4.2010) |
|
CEN |
EN ISO 14971:2012 Medical devices — Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
30.8.2012 |
EN ISO 14971:2009 Note 2.1 |
Date expired (30.8.2012) |
|
CEN |
EN ISO 15001:2011 Anaesthetic and respiratory equipment — Compatibility with oxygen (ISO 15001:2010) |
27.4.2012 |
EN ISO 15001:2010 Note 2.1 |
Date expired (30.4.2012) |
|
CEN |
EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008) |
19.2.2009 |
EN 13220:1998 Note 2.1 |
Date expired (31.7.2010) |
|
CEN |
EN ISO 15004-1:2009 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006) |
2.12.2009 |
EN ISO 15004-1:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 15747:2011 Plastic containers for intravenous injections (ISO 15747:2010) |
27.4.2012 |
EN ISO 15747:2010 Note 2.1 |
Date expired (30.4.2012) |
|
CEN |
EN ISO 15798:2010 Ophthalmic implants — Ophthalmic viscosurgical devices (ISO 15798:2010) |
7.7.2010 |
|
|
|
CEN |
EN ISO 15883-1:2009 Washer-disinfectors — Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
2.12.2009 |
EN ISO 15883-1:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 15883-2:2009 Washer-disinfectors — Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. (ISO 15883-2:2006) |
2.12.2009 |
EN ISO 15883-2:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 15883-3:2009 Washer-disinfectors — Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO 15883-3:2006) |
2.12.2009 |
EN ISO 15883-3:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 15883-4:2009 Washer-disinfectors — Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes (ISO 15883-4:2008) |
2.12.2009 |
EN ISO 15883-4:2008 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN 15986:2011 Symbol for use in the labelling of medical devices — Requirements for labelling of medical devices containing phthalates |
13.5.2011 |
|
|
|
CEN |
EN ISO 16061:2009 Instrumentation for use in association with non-active surgical implants — General requirements (ISO 16061:2008, Corrected version 2009-03-15) |
7.7.2010 |
EN ISO 16061:2008 Note 2.1 |
Date expired (28.2.2010) |
|
CEN |
EN ISO 16201:2006 Technical aids for disabled persons — Environmental control systems for daily living (ISO 16201:2006) |
19.2.2009 |
|
|
|
CEN |
EN ISO 17510-1:2009 Sleep apnoea breathing therapy — Part 1: Sleep apnoea breathing therapy equipment (ISO 17510-1:2007) |
2.12.2009 |
EN ISO 17510-1:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 17510-2:2009 Sleep apnoea breathing therapy — Part 2: Masks and application accessories (ISO 17510-2:2007) |
2.12.2009 |
EN ISO 17510-2:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 17664:2004 Sterilization of medical devices — Information to be provided by the manufacturer for the processing of resterilizable medical devices (ISO 17664:2004) |
30.9.2005 |
|
|
|
CEN |
EN ISO 17665-1:2006 Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
15.11.2006 |
EN 554:1994 Note 2.1 |
Date expired (31.8.2009) |
|
CEN |
EN ISO 18777:2009 Transportable liquid oxygen systems for medical use — Particular requirements (ISO 18777:2005) |
2.12.2009 |
EN ISO 18777:2005 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 18778:2009 Respiratory equipment — Infant monitors — Particular requirements (ISO 18778:2005) |
2.12.2009 |
EN ISO 18778:2005 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 18779:2005 Medical devices for conserving oxygen and oxygen mixtures — Particular requirements (ISO 18779:2005) |
30.9.2005 |
|
|
|
CEN |
EN ISO 19054:2006 Rail systems for supporting medical equipment (ISO 19054:2005) |
7.9.2006 |
EN 12218:1998 Note 2.1 |
Date expired (30.6.2008) |
|
CEN |
EN 20594-1:1993 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment — Part 1: General requirements (ISO 594-1:1986) |
18.11.1995 |
|
|
|
|
EN 20594-1:1993/A1:1997 |
10.8.1999 |
Note 3 |
Date expired (31.5.1998) |
|
|
EN 20594-1:1993/AC:1996 |
2.12.2009 |
|
|
|
CEN |
EN ISO 21534:2009 Non-active surgical implants — Joint replacement implants — Particular requirements (ISO 21534:2007) |
2.12.2009 |
EN ISO 21534:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 21535:2009 Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants (ISO 21535:2007) |
2.12.2009 |
EN ISO 21535:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 21536:2009 Non-active surgical implants — Joint replacement implants — Specific requirements for knee-joint replacement implants (ISO 21536:2007) |
2.12.2009 |
EN ISO 21536:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 21649:2009 Needle-free injectors for medical use — Requirements and test methods (ISO 21649:2006) |
7.7.2010 |
EN ISO 21649:2006 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 21969:2009 High-pressure flexible connections for use with medical gas systems (ISO 21969:2009) |
7.7.2010 |
EN ISO 21969:2006 Note 2.1 |
Date expired (31.5.2010) |
|
CEN |
EN ISO 21987:2009 Ophthalmic optics — Mounted spectacle lenses (ISO 21987:2009) |
7.7.2010 |
|
|
|
CEN |
EN ISO 22442-1:2007 Medical devices utilizing animal tissues and their derivatives — Part 1: Application of risk management (ISO 22442-1:2007) |
27.2.2008 |
EN 12442-1:2000 Note 2.1 |
Date expired (30.6.2008) |
|
CEN |
EN ISO 22442-2:2007 Medical devices utilizing animal tissues and their derivatives — Part 2: Controls on sourcing, collection and handling (ISO 22442-2:2007) |
27.2.2008 |
EN 12442-2:2000 Note 2.1 |
Date expired (30.6.2008) |
|
CEN |
EN ISO 22442-3:2007 Medical devices utilizing animal tissues and their derivatives — Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents (ISO 22442-3:2007) |
27.2.2008 |
EN 12442-3:2000 Note 2.1 |
Date expired (30.6.2008) |
|
CEN |
EN ISO 22523:2006 External limb prostheses and external orthoses — Requirements and test methods (ISO 22523:2006) |
9.8.2007 |
EN 12523:1999 Note 2.1 |
Date expired (30.4.2007) |
|
This standard still needs to be amended to take into account the requirements introduced by Directive 2007/47/EC. The amended standard will be published by CEN as soon as possible. Manufacturers are advised to check whether all relevant Essential Requirements of the amended directive are appropriately covered. |
||||
|
CEN |
EN ISO 22675:2006 Prosthetics — Testing of ankle-foot devices and foot units — Requirements and test methods (ISO 22675:2006) |
9.8.2007 |
|
|
|
This standard still needs to be amended to take into account the requirements introduced by Directive 2007/47/EC. The amended standard will be published by CEN as soon as possible. Manufacturers are advised to check whether all relevant Essential Requirements of the amended directive are appropriately covered. |
||||
|
CEN |
EN ISO 23328-1:2008 Breathing system filters for anaesthetic and respiratory use — Part 1: Salt test method to assess filtration performance (ISO 23328-1:2003) |
19.2.2009 |
EN 13328-1:2001 Note 2.1 |
Date expired (30.9.2008) |
|
CEN |
EN ISO 23328-2:2009 Breathing system filters for anaesthetic and respiratory use — Part 2: Non-filtration aspects (ISO 23328-2:2002) |
2.12.2009 |
EN ISO 23328-2:2008 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 23747:2009 Anaesthetic and respiratory equipment — Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2007) |
2.12.2009 |
EN ISO 23747:2007 Note 2.1 |
Date expired (21.3.2010) |
|
CEN |
EN ISO 25539-1:2009 Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses (ISO 25539-1:2003 including Amd 1:2005) |
2.12.2009 |
EN ISO 25539-1:2008 EN 12006-3:1998+A1:2009 Note 2.1 |
Date expired (21.3.2010) |
|
|
EN ISO 25539-1:2009/AC:2011 |
30.8.2012 |
|
|
|
CEN |
EN ISO 25539-2:2009 Cardiovascular implants — Endovascular devices — Part 2: Vascular stents (ISO 25539-2:2008) |
2.12.2009 |
EN ISO 25539-2:2008 EN 12006-3:1998+A1:2009 Note 2.1 |
Date expired (21.3.2010) |
|
|
EN ISO 25539-2:2009/AC:2011 |
30.8.2012 |
|
|
|
CEN |
EN ISO 26782:2009 Anaesthetic and respiratory equipment — Spirometers intended for the measurement of time forced expired volumes in humans (ISO 26782:2009) |
7.7.2010 |
|
|
|
|
EN ISO 26782:2009/AC:2009 |
7.7.2010 |
|
|
|
CEN |
EN 27740:1992 Instruments for surgery, scalpels with detachable blades, fitting dimensions (ISO 7740:1985) |
18.11.1995 |
|
|
|
|
EN 27740:1992/A1:1997 |
10.8.1999 |
Note 3 |
Date expired (31.5.1998) |
|
|
EN 27740:1992/AC:1996 |
2.12.2009 |
|
|
|
CEN |
EN ISO 81060-1:2012 Non-invasive sphygmomanometers — Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007) |
30.8.2012 |
EN 1060-2:1995+A1:2009 EN 1060-1:1995+A2:2009 Note 2.1 |
31.5.2015 |
|
Cenelec |
EN 60118-13:2005 Electroacoustics — Hearing aids — Part 13: Electromagnetic compatibility (EMC) IEC 60118-13:2004 |
19.1.2006 |
EN 60118-13:1997 Note 2.1 |
Date expired (1.2.2008) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60522:1999 Determination of the permanent filtration of X-ray tube assemblies IEC 60522:1999 |
14.11.2001 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60580:2000 Medical electrical equipment — Dose area product meters IEC 60580:2000 |
13.12.2002 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-1:2006 Medical electrical equipment — Part 1: General requirements for basic safety and essential performance IEC 60601-1:2005 |
27.11.2008 |
EN 60601-1:1990 and its amendments + EN 60601-1-1:2001 + EN 60601-1-4:1996 and its amendment Note 2.1 |
Date expired (1.6.2012) |
|
|
EN 60601-1:2006/A1:2013 IEC 60601-1:2005/A1:2012 |
This is the first publication |
Note 3 |
31.12.2017 |
|
|
EN 60601-1:2006/AC:2010 |
18.1.2011 |
|
|
|
Addendum to Note 1 and Note 3 concerning dates of cessation of presumption of conformity when applying EN 60601-1:2006. The date of cessation of presumption of conformity when applying EN 60601-1:2006 is 31.12.2017. However the Annex ZZ to EN 60601-1:2006 ceases to specify the presumption of conformity with the Essential Requirements of Directive 93/42/EEC on 31.12.2015. As from 1.1.2016, only the clauses and sub-clauses of EN 60601-1:2006 corresponding to the clauses and sub-clauses referred to in Annex ZZ to EN 60601-1:2006/A1:2013 provide presumption of conformity with the Essential Requirements of Directive 93/42/EEC, to the extent indicated in the Annex ZZ to EN 60601-1:2006/A1:2013. |
||||
|
Cenelec |
EN 60601-1-2:2007 Medical electrical equipment — Part 1-2: General requirements for basic safety and essential performance — Collateral standard: Electromagnetic compatibility — Requirements and tests IEC 60601-1-2:2007 (Modified) |
27.11.2008 |
EN 60601-1-2:2001 + A1:2006 Note 2.1 |
Date expired (1.6.2012) |
|
|
EN 60601-1-2:2007/AC:2010 |
18.1.2011 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-1-3:2008 Medical electrical equipment — Part 1-3: General requirements for basic safety and essential performance — Collateral Standard: Radiation protection in diagnostic X-ray equipment IEC 60601-1-3:2008 |
27.11.2008 |
EN 60601-1-3:1994 Note 2.1 |
Date expired (1.6.2012) |
|
|
EN 60601-1-3:2008/AC:2010 |
18.1.2011 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-1-6:2010 Medical electrical equipment — Part 1-6: General requirements for basic safety and essential performance — Collateral standard: Usability IEC 60601-1-6:2010 |
18.1.2011 |
EN 60601-1-6:2007 Note 2.1 |
Date expired (1.4.2013) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-1-8:2007 Medical electrical equipment — Part 1-8: General requirements for basic safety and essential performance — Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems IEC 60601-1-8:2006 |
27.11.2008 |
EN 60601-1-8:2004 + A1:2006 Note 2.1 |
Date expired (1.6.2012) |
|
|
EN 60601-1-8:2007/AC:2010 |
18.1.2011 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-1-10:2008 Medical electrical equipment — Part 1-10: General requirements for basic safety and essential performance — Collateral Standard: Requirements for the development of physiologic closed-loop controllers IEC 60601-1-10:2007 |
27.11.2008 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-1-11:2010 Medical electrical equipment — Part 1-11: General requirements for basic safety and essential performance — Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment IEC 60601-1-11:2010 |
18.1.2011 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-1:1998 Medical electrical equipment — Part 2-1: Particular requirements for the safety of electron accelerators in the range of 1 MeV to 50 MeV IEC 60601-2-1:1998 |
14.11.2001 |
|
|
|
|
EN 60601-2-1:1998/A1:2002 IEC 60601-2-1:1998/A1:2002 |
13.12.2002 |
Note 3 |
Date expired (1.6.2005) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-2:2009 Medical electrical equipment — Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories IEC 60601-2-2:2009 |
7.7.2010 |
EN 60601-2-2:2007 Note 2.1 |
Date expired (1.4.2012) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-3:1993 Medical electrical equipment — Part 2: Particular requirements for the safety of short-wave therapy equipment IEC 60601-2-3:1991 |
18.11.1995 |
|
|
|
|
EN 60601-2-3:1993/A1:1998 IEC 60601-2-3:1991/A1:1998 |
18.11.1995 |
Note 3 |
Date expired (1.7.2001) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-4:2003 Medical electrical equipment — Part 2-4: Particular requirements for the safety of cardiac defibrillators IEC 60601-2-4:2002 |
15.10.2003 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-5:2000 Medical electrical equipment — Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment IEC 60601-2-5:2000 |
13.12.2002 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-8:1997 Medical electrical equipment — Part 2: Particular requirements for the safety of therapeutic X-ray equipment operating in the range 10 kV to 1 MV IEC 60601-2-8:1987 |
14.11.2001 |
|
|
|
|
EN 60601-2-8:1997/A1:1997 IEC 60601-2-8:1987/A1:1997 |
14.11.2001 |
Note 3 |
Date expired (1.7.1998) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-10:2000 Medical electrical equipment — Part 2-10: Particular requirements for the safety of nerve and muscle stimulators IEC 60601-2-10:1987 |
13.12.2002 |
|
|
|
|
EN 60601-2-10:2000/A1:2001 IEC 60601-2-10:1987/A1:2001 |
13.12.2002 |
Note 3 |
Date expired (1.11.2004) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-11:1997 Medical electrical equipment — Part 2-11: Particular requirements for the safety of gamma beam therapy equipment IEC 60601-2-11:1997 |
9.10.1999 |
|
|
|
|
EN 60601-2-11:1997/A1:2004 IEC 60601-2-11:1997/A1:2004 |
9.10.1999 |
Note 3 |
Date expired (1.9.2007) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-12:2006 Medical electrical equipment — Part 2-12: Particular requirements for the safety of lung ventilators — Critical care ventilators IEC 60601-2-12:2001 |
22.12.2007 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-13:2006 Medical electrical equipment — Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems IEC 60601-2-13:2003 |
22.12.2007 |
|
|
|
|
EN 60601-2-13:2006/A1:2007 IEC 60601-2-13:2003/A1:2006 |
22.12.2007 |
Note 3 |
Date expired (1.3.2010) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-16:1998 Medical electrical equipment — Part 2-16: Particular requirements for the safety of haemodialysis, haemodiafiltration and haemofiltration equipment IEC 60601-2-16:1998 |
9.10.1999 |
|
|
|
|
EN 60601-2-16:1998/AC:1999 |
18.1.2011 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-17:2004 Medical electrical equipment — Part 2-17: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment IEC 60601-2-17:2004 |
8.11.2005 |
EN 60601-2-17:1996 + A1:1996 Note 2.1 |
Date expired (1.3.2007) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-18:1996 Medical electrical equipment — Part 2: Particular requirements for the safety of endoscopic equipment IEC 60601-2-18:1996 |
9.10.1999 |
|
|
|
|
EN 60601-2-18:1996/A1:2000 IEC 60601-2-18:1996/A1:2000 |
9.10.1999 |
Note 3 |
Date expired (1.8.2003) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-19:2009 Medical electrical equipment — Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators IEC 60601-2-19:2009 |
7.7.2010 |
EN 60601-2-19:1996 + A1:1996 Note 2.1 |
Date expired (1.4.2012) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-20:2009 Medical electrical equipment — Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators IEC 60601-2-20:2009 |
18.1.2011 |
EN 60601-2-20:1996 Note 2.1 |
Date expired (1.9.2012) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-21:2009 Medical electrical equipment — Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers IEC 60601-2-21:2009 |
7.7.2010 |
EN 60601-2-21:1994 + A1:1996 Note 2.1 |
Date expired (1.4.2012) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-22:1996 Medical electrical equipment — Part 2: Particular requirements for the safety of diagnostic and therapeutic laser equipment IEC 60601-2-22:1995 |
17.5.1997 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-23:2000 Medical electrical equipment — Part 2-23: Particular requirements for the safety, including essential performance, of transcutaneous partial pressure monitoring equipment IEC 60601-2-23:1999 |
14.11.2001 |
EN 60601-2-23:1997 Note 2.1 |
Date expired (1.1.2003) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-24:1998 Medical electrical equipment — Part 2-24: Particular requirements for the safety of infusion pumps and controllers IEC 60601-2-24:1998 |
9.10.1999 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-25:1995 Medical electrical equipment — Part 2-25: Particular requirements for the safety of electrocardiographs IEC 60601-2-25:1993 |
17.5.1997 |
|
|
|
|
EN 60601-2-25:1995/A1:1999 IEC 60601-2-25:1993/A1:1999 |
13.12.2002 |
Note 3 |
Date expired (1.5.2002) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-26:2003 Medical electrical equipment — Part 2-26: Particular requirements for the safety of electroencephalographs IEC 60601-2-26:2002 |
8.11.2005 |
EN 60601-2-26:1994 Note 2.1 |
Date expired (1.3.2006) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-27:2006 Medical electrical equipment — Part 2-27: Particular requirements for the safety, including essential performance, of electrocardiographic monitoring equipment IEC 60601-2-27:2005 |
26.7.2006 |
EN 60601-2-27:1994 Note 2.1 |
Date expired (1.11.2008) |
|
|
EN 60601-2-27:2006/AC:2006 |
18.1.2011 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-28:2010 Medical electrical equipment — Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis IEC 60601-2-28:2010 |
18.1.2011 |
EN 60601-2-28:1993 Note 2.1 |
Date expired (1.4.2013) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-29:2008 Medical electrical equipment — Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators IEC 60601-2-29:2008 |
15.7.2009 |
EN 60601-2-29:1999 Note 2.1 |
Date expired (1.11.2011) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-34:2000 Medical electrical equipment — Part 2-34: Particular requirements for the safety, including essential performance, of invasive blood pressure monitoring equipment IEC 60601-2-34:2000 |
15.10.2003 |
EN 60601-2-34:1995 Note 2.1 |
Date expired (1.11.2003) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-36:1997 Medical electrical equipment — Part 2: Particular requirements for the safety of equipment for extracorporeally induced lithotripsy IEC 60601-2-36:1997 |
9.10.1999 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-37:2008 Medical electrical equipment — Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment IEC 60601-2-37:2007 |
27.11.2008 |
EN 60601-2-37:2001 + A1:2005 + A2:2005 Note 2.1 |
Date expired (1.10.2010) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-39:2008 Medical electrical equipment — Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment IEC 60601-2-39:2007 |
27.11.2008 |
EN 60601-2-39:1999 Note 2.1 |
Date expired (1.3.2011) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-40:1998 Medical electrical equipment — Part 2-40: Particular requirements for the safety of electromyographs and evoked response equipment IEC 60601-2-40:1998 |
9.10.1999 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-41:2009 Medical electrical equipment — Part 2-41: Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis IEC 60601-2-41:2009 |
18.1.2011 |
EN 60601-2-41:2000 Note 2.1 |
Date expired (1.11.2012) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-43:2010 Medical electrical equipment — Part 2-43: Particular requirements for basic safety and essential performance of X-ray equipment for interventional procedures IEC 60601-2-43:2010 |
18.1.2011 |
EN 60601-2-43:2000 + EN 60601-2-54:2009 Note 2.1 |
Date expired (1.6.2013) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-45:2001 Medical electrical equipment — Part 2-45: Particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic devices IEC 60601-2-45:2001 |
14.11.2001 |
EN 60601-2-45:1998 Note 2.1 |
Date expired (1.7.2004) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-46:1998 Medical electrical equipment — Part 2-46: Particular requirements for the safety of operating tables IEC 60601-2-46:1998 |
14.11.2001 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-47:2001 Medical electrical equipment — Part 2-47: Particular requirements for the safety, including essential performance, of ambulatory electrocardiographic systems IEC 60601-2-47:2001 |
13.12.2002 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-49:2001 Medical electrical equipment — Part 2-49: Particular requirements for the safety of multifunction patient monitoring equipment IEC 60601-2-49:2001 |
13.12.2002 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-50:2009 Medical electrical equipment — Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment IEC 60601-2-50:2009 |
7.7.2010 |
EN 60601-2-50:2002 Note 2.1 |
Date expired (1.5.2012) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-51:2003 Medical electrical equipment — Part 2-51: Particular requirements for safety, including essential performance, of recording and analysing single channel and multichannel electrocardiographs IEC 60601-2-51:2003 |
24.6.2004 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60601-2-52:2010 Medical electrical equipment — Part 2-52: Particular requirements for basic safety and essential performance of medical beds IEC 60601-2-52:2009 |
13.5.2011 |
EN 60601-2-38:1996 + A1:2000 + EN 1970:2000 Note 2.1 |
Date expired (1.6.2012) |
|
|
EN 60601-2-52:2010/AC:2011 |
30.8.2012 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60627:2001 Diagnostic X-ray imaging equipment — Characteristics of general purpose and mammographic anti-scatter grids IEC 60627:2001 |
13.12.2002 |
|
|
|
|
EN 60627:2001/AC:2002 |
18.1.2011 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60645-1:2001 Electroacoustics — Audiological equipment — Part 1: Pure-tone audiometers IEC 60645-1:2001 |
13.12.2002 |
EN 60645-1:1994 Note 2.1 |
Date expired (1.10.2004) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60645-2:1997 Audiometers — Part 2: Equipment for speech audiometry IEC 60645-2:1993 |
17.5.1997 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60645-3:2007 Electroacoustics — Audiometric equipment — Part 3: Test signals of short duration IEC 60645-3:2007 |
27.11.2008 |
EN 60645-3:1995 Note 2.1 |
Date expired (1.6.2010) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 60645-4:1995 Audiometers — Part 4: Equipment for extended high-frequency audiometry IEC 60645-4:1994 |
23.8.1996 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 61217:1996 Radiotherapy equipment — Coordinates, movements and scales IEC 61217:1996 |
14.11.2001 |
|
|
|
|
EN 61217:1996/A1:2001 IEC 61217:1996/A1:2000 |
14.11.2001 |
Note 3 |
Date expired (1.12.2003) |
|
|
EN 61217:1996/A2:2008 IEC 61217:1996/A2:2007 |
27.11.2008 |
Note 3 |
Date expired (1.2.2011) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 61217:2012 Radiotherapy equipment — Coordinates, movements and scales IEC 61217:2011 |
30.8.2012 |
EN 61217:1996 and its amendments Note 2.1 |
11.1.2015 |
|
Cenelec |
EN 61676:2002 Medical electrical equipment — Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology IEC 61676:2002 |
15.10.2003 |
|
|
|
|
EN 61676:2002/A1:2009 IEC 61676:2002/A1:2008 |
7.7.2010 |
Note 3 |
Date expired (1.3.2012) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 62083:2009 Medical electrical equipment — Requirements for the safety of radiotherapy treatment planning systems IEC 62083:2009 |
18.1.2011 |
EN 62083:2001 Note 2.1 |
Date expired (1.11.2012) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 62220-1:2004 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1: Determination of the detective quantum efficiency IEC 62220-1:2003 |
24.6.2004 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 62220-1-2:2007 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-2: Determination of the detective quantum efficiency — Detectors used in mammography IEC 62220-1-2:2007 |
27.11.2008 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 62220-1-3:2008 Medical electrical equipment — Characteristics of digital X-ray imaging devices — Part 1-3: Determination of the detective quantum efficiency — Detectors used in dynamic imaging IEC 62220-1-3:2008 |
15.7.2009 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 62304:2006 Medical device software — Software life-cycle processes IEC 62304:2006 |
27.11.2008 |
|
|
|
|
EN 62304:2006/AC:2008 |
18.1.2011 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 62366:2008 Medical devices — Application of usability engineering to medical devices IEC 62366:2007 |
27.11.2008 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 80601-2-35:2009 Medical electrical equipment — Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use IEC 80601-2-35:2009 |
18.1.2011 |
EN 60601-2-35:1996 Note 2.1 |
Date expired (1.11.2012) |
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 80601-2-58:2009 Medical electrical equipment — Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery IEC 80601-2-58:2008 |
7.7.2010 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Cenelec |
EN 80601-2-59:2009 Medical electrical equipment — Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening IEC 80601-2-59:2008 |
18.1.2011 |
|
|
|
(*): This European Standard does not necessarily cover the requirements introduced by Directive 2007/47/EC. |
||||
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No1025/2012. (2) |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘.../AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
|
16.5.2014 |
EN |
Official Journal of the European Union |
C 149/33 |
Commission communication in the framework of the implementation of Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
2014/C 149/03
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
|
CEN |
EN ISO 11252:2013 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation (ISO 11252:2013) |
|
|
|
Cenelec |
EN 41003:2008 Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system |
EN 41003:1998 Note 2.1 |
Date expired (1.7.2011) |
|
Cenelec |
EN 50065-4-2:2001 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz — Part 4-2: Low voltage decoupling filters — Safety requirements |
|
|
|
|
EN 50065-4-2:2001/A1:2003 |
Note 3 |
Date expired (1.12.2005) |
|
|
EN 50065-4-2:2001/A2:2005 |
Note 3 |
Date expired (1.3.2008) |
|
Cenelec |
EN 50065-4-7:2005 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz — Part 4-7: Portable low voltage decoupling filters — Safety requirements |
|
|
|
|
EN 50065-4-7:2005/AC:2006 |
|
|
|
Cenelec |
EN 50085-1:2005 Cable trunking systems and cable ducting systems for electrical installations — Part 1: General requirements |
EN 50085-1:1997 Note 2.1 |
Date expired (1.7.1999) |
|
|
EN 50085-1:2005/A1:2013 |
Note 3 |
20.5.2016 |
|
Cenelec |
EN 50085-2-1:2006 Cable trunking systems and cable ducting systems for electrical installations — Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings |
|
|
|
|
EN 50085-2-1:2006/A1:2011 |
Note 3 |
10.10.2014 |
|
Cenelec |
EN 50085-2-2:2008 Cable trunking systems and cable ducting systems for electrical installations — Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor |
|
|
|
Cenelec |
EN 50085-2-3:2010 Cable trunking systems and cable ducting systems for electrical installations — Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets |
EN 50085-2-3:1999 Note 2.1 |
Date expired (1.3.2013) |
|
Cenelec |
EN 50085-2-4:2009 Cable trunking systems and cable ducting systems for electrical installations — Part 2-4: Particular requirements for service poles and service posts |
|
|
|
Cenelec |
EN 50106:2008 Safety of household and similar electrical appliances — Particular rules for routine tests referring to appliances under the scope of EN 60335-1 |
EN 50106:1997 + A1:1998 + A2:2001 Note 2.1 |
Date expired (1.6.2011) |
|
Cenelec |
EN 50117-1:2002 Coaxial cables — Part 1: Generic specification |
|
|
|
|
EN 50117-1:2002/A1:2006 |
Note 3 |
Date expired (1.7.2009) |
|
|
EN 50117-1:2002/A2:2013 |
Note 3 |
17.6.2016 |
|
Cenelec |
EN 50117-2-1:2005 Coaxial cables — Part 2-1: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz - 1 000 MHz |
|
|
|
|
EN 50117-2-1:2005/A1:2008 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 50117-2-1:2005/A2:2013 |
Note 3 |
1.7.2016 |
|
Cenelec |
EN 50117-2-2:2004 Coaxial cables — Part 2-2: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -1 000 MHz |
|
|
|
|
EN 50117-2-2:2004/A2:2013 |
Note 3 |
1.7.2016 |
|
|
EN 50117-2-2:2004/A1:2008 |
Note 3 |
Date expired (1.12.2010) |
|
Cenelec |
EN 50117-2-3:2004 Coaxial cables — Part 2-3: Sectional specification for cables used in cabled distribution networks — Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz |
|
|
|
|
EN 50117-2-3:2004/A1:2008 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 50117-2-3:2004/A2:2013 |
Note 3 |
1.7.2016 |
|
Cenelec |
EN 50117-2-4:2004 Coaxial cables — Part 2-4: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz -3 000 MHz |
|
|
|
|
EN 50117-2-4:2004/A1:2008 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 50117-2-4:2004/A2:2013 |
Note 3 |
1.7.2016 |
|
Cenelec |
EN 50117-2-5:2004 Coaxial cables — Part 2-5: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -3 000 MHz |
|
|
|
|
EN 50117-2-5:2004/A1:2008 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 50117-2-5:2004/A2:2013 |
Note 3 |
1.7.2016 |
|
|
EN 50117-2-5:2004/AC:2012 |
|
|
|
Cenelec |
EN 50117-3-1:2002 Coaxial cables — Part 3-1: Sectional specifications for cables used in Telecom applications — Miniaturized cables used in digital communication systems |
|
|
|
Cenelec |
EN 50117-4-1:2008 Coaxial cables — Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 — Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
|
|
|
|
EN 50117-4-1:2008/A1:2013 |
Note 3 |
17.6.2016 |
|
Cenelec |
EN 50156-1:2004 Electrical equipment for furnaces and ancillary equipment — Part 1: Requirements for application design and installation |
|
|
|
Cenelec |
EN 50178:1997 Electronic equipment for use in power installations |
|
|
|
Cenelec |
EN 50214:2006 Flat polyvinyl chloride sheathed flexible cables |
HD 359 S2:1990 + EN 50214:1997 Note 2.1 |
Date expired (1.10.2008) |
|
|
EN 50214:2006/AC:2007 |
|
|
|
Cenelec |
EN 50250:2002 Conversion adaptors for industrial use |
EN 50250:1998 Note 2.1 |
Date expired (1.7.2005) |
|
|
EN 50250:2002/AC:2007 |
|
|
|
Cenelec |
EN 50262:1998 Cable glands for electrical installations |
|
|
|
|
EN 50262:1998/A1:2001 |
Note 3 |
Date expired (1.4.2003) |
|
|
EN 50262:1998/A2:2004 |
Note 3 |
Date expired (1.10.2007) |
|
|
EN 50262:1998/AC:1998 |
|
|
|
Cenelec |
EN 50267-1:1998 Common test methods for cables under fire conditions — Tests on gases evolved during combustion of materials from cables — Part 1: Apparatus |
HD 602 S1:1992 Note 2.1 |
Date expired (1.3.2000) |
|
Cenelec |
EN 50267-2-1:1998 Common test methods for cables under fire conditions — Tests on gases evolved during combustion of materials from cables — Part 2-1: Procedures — Determination of the amount of halogen acid gas |
|
|
|
Cenelec |
EN 50267-2-2:1998 Common test methods for cables under fire conditions — Tests on gases evolved during combustion of materials from cables — Part 2-2: Procedures — Determination of degree of acidity of gases for materials by measuring pH and conductivity |
|
|
|
Cenelec |
EN 50267-2-3:1998 Common test methods for cables under fire conditions — Tests on gases evolved during combustion of materials from cables — Part 2-3: Procedures — Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
HD 602 S1:1992 Note 2.1 |
Date expired (1.3.2000) |
|
Cenelec |
EN 50274:2002 Low-voltage switchgear and controlgear assemblies — Protection against electric shock — Protection against unintentional direct contact with hazardous live parts |
|
|
|
|
EN 50274:2002/AC:2009 |
|
|
|
Cenelec |
EN 50288-1:2003 Multi-element metallic cables used in analogue and digital communication and control — Part 1: Generic specification |
|
|
|
Cenelec |
EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 1: Generic specification |
EN 50288-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-2-1:2003 Multi-element metallic cables used in analogue and digital communication and control — Part 2-1: Sectional specification for screened cables characterised up to 100 MHz — Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-2-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 2-1: Sectional specification for screened cables characterised up to 100 MHz — Horizontal and building backbone cables |
EN 50288-2-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-2-2:2003 Multi-element metallic cables used in analogue and digital communication and control — Part 2-2: Sectional specification for screened cables characterised up to 100 MHz — Work area and patch cord cables |
|
|
|
Cenelec |
EN 50288-2-2:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 2-2: Sectional specification for screened cables characterised up to 100 MHz — Work area and patch cord cables |
EN 50288-2-2:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-3-1:2003 Multi-element metallic cables used in analogue and digital communication and control — Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz — Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-3-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz — Horizontal and building backbone cables |
EN 50288-3-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-3-2:2003 Multi-element metallic cables used in analogue and digital communication and control — Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz — Work area and patch cord cables |
|
|
|
Cenelec |
EN 50288-3-2:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz — Work area and patch cord cables |
EN 50288-3-2:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-4-1:2003 Multi-element metallic cables used in analogue and digital communication and control — Part 4-1: Sectional specification for screened cables characterised up to 600 MHz — Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-4-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 4-1: Sectional specification for screened cables characterised up to 600 MHz — Horizontal and building backbone cables |
EN 50288-4-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-4-2:2003 Multi-element metallic cables used in analogue and digital communication and control — Part 4-2: Sectional specification for screened cables characterised up to 600 MHz — Work area and patch cord cables |
|
|
|
Cenelec |
EN 50288-4-2:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 4-2: Sectional specification for screened cables characterised up to 600 MHz — Work area and patch cord cables |
EN 50288-4-2:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-5-1:2003 Multi-element metallic cables used in analogue and digital communication and control — Part 5-1: Sectional specification for screened cables characterized up to 250 MHz — Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-5-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 5-1: Sectional specification for screened cables characterized up to 250 MHz — Horizontal and building backbone cables |
EN 50288-5-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-5-2:2003 Multi-element metallic cables used in analogue and digital communication and control — Part 5-2: Sectional specification for screened cables characterized up to 250 MHz — Work area and patch cord cables |
|
|
|
Cenelec |
EN 50288-5-2:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 5-2: Sectional specification for screened cables characterized up to 250 MHz — Work area and patch cord cables |
EN 50288-5-2:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-6-1:2003 Multi-element metallic cables used in analogue and digital communication and control — Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz — Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-6-1:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz — Horizontal and building backbone cables |
EN 50288-6-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-6-2:2003 Multi-element metallic cables used in analogue and digital communication and control — Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz — Work area and patch cord cables |
|
|
|
Cenelec |
EN 50288-6-2:2013 Multi-element metallic cables used in analogue and digital communication and control — Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz — Work area and patch cord cables |
EN 50288-6-2:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-7:2005 Multi-element metallic cables used in analogue and digital communication and control — Part 7: Sectional specification for instrumentation and control cables |
|
|
|
Cenelec |
EN 50288-8:2012 Multi-element metallic cables used in analogue and digital communication and control — Part 8: Specification for type 1 cables characterised up to 2 MHz |
|
|
|
Cenelec |
EN 50288-9-1:2012 Multi-element metallic cables used in analogue and digital communication and control — Part 9-1: Sectional specification for screened cables characterised up to 1 000 MHz — Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-10-1:2012 Multi-element metallic cables used in analogue and digital communication and control — Part 10-1: Sectional specification for screened cables characterized up to 500 MHz — Horizontal floor and building backbone cables |
|
|
|
Cenelec |
EN 50288-11-1:2012 Multi-element metallic cables used in analogue and digital communication and control — Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz — Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50289-1-3:2001 Communication cables — Specifications for test methods — Part 1-3: Electrical test methods — Dielectric strength |
|
|
|
Cenelec |
EN 50289-1-4:2001 Communication cables — Specifications for test methods — Part 1-4: Electrical test methods — Insulation resistance |
|
|
|
Cenelec |
EN 50290-2-1:2005 Communication cables — Part 2-1: Common design rules and construction |
|
|
|
Cenelec |
EN 50290-2-20:2001 Communication cables — Part 2-20: Common design rules and construction — General |
|
|
|
Cenelec |
EN 50290-2-21:2001 Communication cables — Part 2-21: Common design rules and construction — PVC insulation compounds |
|
|
|
|
EN 50290-2-21:2001/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
|
EN 50290-2-21:2001/AC:2003 |
|
|
|
Cenelec |
EN 50290-2-22:2001 Communication cables — Part 2-22: Common design rules and construction — PVC sheathing compounds |
|
|
|
|
EN 50290-2-22:2001/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
Cenelec |
EN 50290-2-23:2001 Communication cables — Part 2-23: Common design rules and construction — PE insulation |
|
|
|
Cenelec |
EN 50290-2-23:2013 Communication cables — Part 2-23: Common design rules and construction — Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
EN 50290-2-23:2001 Note 2.1 |
16.9.2016 |
|
Cenelec |
EN 50290-2-24:2002 Communication cables — Part 2-24: Common design rules and construction — PE sheathing |
|
|
|
|
EN 50290-2-24:2002/A1:2008 |
Note 3 |
Date expired (1.11.2011) |
|
Cenelec |
EN 50290-2-25:2002 Communication cables — Part 2-25: Common design rules and construction — Polypropylene insulation compounds |
|
|
|
Cenelec |
EN 50290-2-25:2013 Communication cables — Part 2-25: Common design rules and construction — Polypropylene insulation compounds |
EN 50290-2-25:2002 Note 2.1 |
16.9.2016 |
|
Cenelec |
EN 50290-2-26:2002 Communication cables — Part 2-26: Common design rules and construction — Halogen free flame retardant insulation compounds |
|
|
|
|
EN 50290-2-26:2002/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
Cenelec |
EN 50290-2-27:2002 Communication cables — Part 2-27: Common design rules and construction — Halogen free flame retardant thermoplastic sheathing compounds |
|
|
|
|
EN 50290-2-27:2002/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
|
EN 50290-2-27:2002/A1:2007/AC:2010 |
|
|
|
Cenelec |
EN 50290-2-28:2002 Communication cables — Part 2-28: Common design rules and construction — Filling compounds for filled cables |
|
|
|
Cenelec |
EN 50290-2-29:2002 Communication cables — Part 2-29: Common design rules and construction — Cross-linked PE insulation compounds |
|
|
|
Cenelec |
EN 50290-2-30:2002 Communication cables — Part 2-30: Common design rules and construction — Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
|
|
|
Cenelec |
EN 50290-4-1:2001 Communication cables — Part 4-1: General considerations for the use of cables — Environmental conditions and safety aspects |
|
|
|
Cenelec |
EN 50363-0:2005 Insulating, sheathing and covering materials for low-voltage energy cables — Part 0: General introduction |
|
|
|
Cenelec |
EN 50363-0:2011 Insulating, sheathing and covering materials for low-voltage energy cables — Part 0: General introduction |
EN 50363-0:2005 Note 2.1 |
Date expired (14.3.2014) |
|
Cenelec |
EN 50363-1:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 1: Cross-linked elastomeric insulating compounds |
|
|
|
Cenelec |
EN 50363-2-1:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 2-1: Cross-linked elastomeric sheathing compounds |
|
|
|
|
EN 50363-2-1:2005/A1:2011 |
Note 3 |
Date expired (14.3.2014) |
|
Cenelec |
EN 50363-2-2:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 2-2: Cross-linked elastomeric covering compounds |
|
|
|
Cenelec |
EN 50363-3:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 3: PVC insulating compounds |
|
|
|
|
EN 50363-3:2005/A1:2011 |
Note 3 |
Date expired (14.3.2014) |
|
Cenelec |
EN 50363-4-1:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 4-1: PVC sheathing compounds |
|
|
|
Cenelec |
EN 50363-4-2:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 4-2: PVC covering compounds |
|
|
|
Cenelec |
EN 50363-5:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 5: Halogen-free, cross-linked insulating compounds |
|
|
|
|
EN 50363-5:2005/A1:2011 |
Note 3 |
Date expired (14.3.2014) |
|
Cenelec |
EN 50363-6:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 6: Halogen-free, cross-linked sheathing compounds |
|
|
|
|
EN 50363-6:2005/A1:2011 |
Note 3 |
Date expired (14.3.2014) |
|
Cenelec |
EN 50363-7:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 7: Halogen-free, thermoplastic insulating compounds |
|
|
|
Cenelec |
EN 50363-8:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 8: Halogen-free, thermoplastic sheathing compounds |
|
|
|
|
EN 50363-8:2005/A1:2011 |
Note 3 |
Date expired (14.3.2014) |
|
Cenelec |
EN 50363-9-1:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 9-1: Miscellaneous insulating compounds — Cross-linked polyvinyl chloride (XLPVC) |
|
|
|
Cenelec |
EN 50363-10-1:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 10-1: Miscellaneous sheathing compounds — Cross-linked polyvinyl chloride (XLPVC) |
|
|
|
Cenelec |
EN 50363-10-2:2005 Insulating, sheathing and covering materials for low voltage energy cables — Part 10-2: Miscellaneous sheathing compounds — Thermoplastic polyurethane |
|
|
|
Cenelec |
EN 50364:2010 Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications |
EN 50364:2001 Note 2.1 |
Date expired (1.11.2012) |
|
Cenelec |
EN 50369:2005 Liquid tight sheathing systems for cable management |
|
|
|
Cenelec |
EN 50395:2005 Electrical test methods for low voltage energy cables |
HD 21.2 S3:1997 + A1:2002 + HD 22.2 S3:1997 + A1:2002 Note 2.1 |
Date expired (1.7.2008) |
|
|
EN 50395:2005/A1:2011 |
Note 3 |
Date expired (14.3.2014) |
|
Cenelec |
EN 50396:2005 Non electrical test methods for low voltage energy cables |
HD 21.2 S3:1997 + A1:2002 + HD 22.2 S3:1997 + A1:2002 Note 2.1 |
Date expired (1.7.2008) |
|
|
EN 50396:2005/A1:2011 |
Note 3 |
Date expired (14.3.2014) |
|
Cenelec |
EN 50406-1:2004 End user multi-pair cables used in high bit rate telecommunication networks — Part 1: Aerial cables |
|
|
|
Cenelec |
EN 50406-2:2004 End user multi-pair cables used in high bit rate telecommunication networks — Part 2: Duct and buried cables |
|
|
|
Cenelec |
EN 50407-1:2004 Multi-pair cables used in high bit rate digital access telecommunication networks — Part 1: Outdoor cables |
|
|
|
Cenelec |
EN 50425:2008 Switches for household and similar fixed electrical installations — Collateral standard — Fireman's switches for exterior and interior signs and luminaires |
|
|
|
Cenelec |
EN 50428:2005 Switches for household and similar fixed electrical installations — Collateral standard — Switches and related accessories for use in home and building electronic systems (HBES) |
|
|
|
|
EN 50428:2005/A1:2007 |
Note 3 |
Date expired (1.10.2010) |
|
|
EN 50428:2005/A2:2009 |
Note 3 |
Date expired (1.6.2012) |
|
Cenelec |
EN 50441-1:2006 Cables for indoor residential telecommunication installations — Part 1: Unscreened cables — Grade 1 |
|
|
|
Cenelec |
EN 50441-1:2012 Cables for indoor residential telecommunication installations — Part 1: Unscreened cables — Grade 1 |
EN 50441-1:2006 Note 2.1 |
23.1.2015 |
|
Cenelec |
EN 50441-2:2006 Cables for indoor residential telecommunication installations — Part 2: Screened cables — Grade 2 |
|
|
|
Cenelec |
EN 50441-2:2012 Cables for indoor residential telecommunication installations — Part 2: Screened cables — Grade 1 |
EN 50441-2:2006 Note 2.1 |
23.1.2015 |
|
Cenelec |
EN 50441-3:2006 Cables for indoor residential telecommunication installations — Part 3: Screened cables — Grade 3 |
|
|
|
Cenelec |
EN 50441-4:2012 Cables for indoor residential telecommunication installations — Part 4: Cables up to 1 200 MHz — Grade 3 |
|
|
|
Cenelec |
EN 50445:2008 Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz — 300 GHz) |
|
|
|
Cenelec |
EN 50491-3:2009 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) — Part 3: Electrical safety requirements |
EN 50090-2-2:1996 + A1:2002 + A2:2007 |
Date expired (1.3.2012) |
|
Cenelec |
EN 50491-4-1:2012 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) — Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
|
|
|
Cenelec |
EN 50497:2007 Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables |
|
|
|
Cenelec |
EN 50520:2009 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations |
|
|
|
Cenelec |
EN 50525-1:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 1: General requirements |
HD 21.1 S4:2002 + HD 22.1 S4:2002 Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-11:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) — Part 2-11: Cables for general applications — Flexible cables with thermoplastic PVC insulation |
HD 21.5 S3:1994 and its amendments + HD 21.12 S1:1994 and its amendment Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-12:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) — Part 2-12: Cables for general applications — Cables with thermoplastic PVC insulation for extensible leads |
HD 21.10 S2:2001 Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-21:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) — Part 2-21: Cables for general applications — Flexible cables with crosslinked elastomeric insulation |
HD 22.4 S4:2004 + HD 22.10 S2:2007 + HD 22.11 S2:2007 + HD 22.12 S2:2007 + HD 22.16 S2:2007 Note 2.1 |
Date expired (17.1.2014) |
|
|
EN 50525-2-21:2011/AC:2013 |
|
|
|
Cenelec |
EN 50525-2-22:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 2-22: Cables for general applications — High flexibility braided cables with crosslinked elastomeric insulation |
HD 22.14 S3:2007 Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-31:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 2-31: Cables for general applications — Single core non-sheathed cables with thermoplastic PVC insulation |
HD 21.3 S3:1995 and its amendments + HD 21.7 S2:1996 and its amendment Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-41:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 2-41: Cables for general applications — Single core cables with crosslinked silicone rubber insulation |
HD 22.3 S4:2004 and its amendment Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-42:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 2-42: Cables for general applications — Single core non-sheathed cables with crosslinked EVA insulation |
HD 22.7 S2:1995 and its amendments Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-51:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 2-51: Cables for general applications — Oil resistant control cables with thermoplastic PVC insulation |
HD 21.13 S1:1995 and its amendment Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-71:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 2-71: Cables for general applications — Flat tinsel cables (cords) with thermoplastic PVC insulation |
HD 21.5 S3:1994 and its amendments Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-72:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 2-72: Cables for general applications — Flat divisible cables (cords) with thermoplastic PVC insulation |
HD 21.11 S1:1995 and its amendment Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-81:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 2-81: Cables for general applications — Cables with crosslinked elastomeric covering for arc welding |
HD 22.6 S2:1995 and its amendments Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-82:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 2-82: Cables for general applications — Cables with crosslinked elastomeric insulation for decorative chains |
HD 22.8 S2:1994 and its amendments Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-2-83:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 2-83: Cables for general applications — Multicore cables with crosslinked silicone rubber insulation |
HD 22.15 S2:2007 Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-3-11:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 3-11: Cables with special fire performance — Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke |
HD 21.14 S1:2003 Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-3-21:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 3-21: Cables with special fire performance — Flexible cables with halogen-free crosslinked insulation, and low emission of smoke |
HD 22.13 S2:2007 Note 2.1 |
Date expired (17.1.2014) |
|
|
EN 50525-3-21:2011/AC:2013 |
|
|
|
Cenelec |
EN 50525-3-31:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 3-31: Cables with special fire performance — Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke |
HD 21.15 S1:2006 Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50525-3-41:2011 Electric cables — Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) — Part 3-41: Cables with special fire performance — Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke |
HD 22.9 S3:2007 Note 2.1 |
Date expired (17.1.2014) |
|
Cenelec |
EN 50550:2011 Power frequency overvoltage protective device for household and similar applications (POP) |
|
|
|
|
EN 50550:2011/AC:2012 |
|
|
|
Cenelec |
EN 50556:2011 Road traffic signal systems |
|
|
|
Cenelec |
EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
|
|
|
Cenelec |
EN 60034-1:2010 Rotating electrical machines — Part 1: Rating and performance IEC 60034-1:2010 (Modified) |
EN 60034-1:2004 Note 2.1 |
Date expired (1.10.2013) |
|
|
EN 60034-1:2010/AC:2010 |
|
|
|
Cenelec |
EN 60034-5:2001 Rotating electrical machines — Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) — Classification IEC 60034-5:2000 |
EN 60034-5:1986 Note 2.1 |
Date expired (1.12.2003) |
|
|
EN 60034-5:2001/A1:2007 IEC 60034-5:2000/A1:2006 |
Note 3 |
Date expired (1.12.2009) |
|
Cenelec |
EN 60034-6:1993 Rotating electrical machines — Part 6: Methods of cooling (IC Code) IEC 60034-6:1991 |
|
|
|
Cenelec |
EN 60034-7:1993 Rotating electrical machines — Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) IEC 60034-7:1992 |
|
|
|
|
EN 60034-7:1993/A1:2001 IEC 60034-7:1992/A1:2000 |
Note 3 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60034-8:2007 Rotating electrical machines — Part 8: Terminal markings and direction of rotation IEC 60034-8:2007 |
EN 60034-8:2002 Note 2.1 |
Date expired (1.7.2010) |
|
Cenelec |
EN 60034-9:2005 Rotating electrical machines — Part 9: Noise limits IEC 60034-9:2003 (Modified) |
EN 60034-9:1997 Note 2.1 |
Date expired (1.3.2008) |
|
|
EN 60034-9:2005/A1:2007 IEC 60034-9:2003/A1:2007 |
Note 3 |
Date expired (1.4.2010) |
|
Cenelec |
EN 60034-11:2004 Rotating electrical machines — Part 11: Thermal protection IEC 60034-11:2004 |
|
|
|
Cenelec |
EN 60034-12:2002 Rotating electrical machines — Part 12: Starting performance of single-speed three-phase cage induction motors IEC 60034-12:2002 |
EN 60034-12:1995 + A2:1995 + A11:1999 Note 2.1 |
Date expired (1.5.2005) |
|
|
EN 60034-12:2002/A1:2007 IEC 60034-12:2002/A1:2007 |
Note 3 |
Date expired (1.9.2010) |
|
Cenelec |
EN 60034-14:2004 Rotating electrical machines — Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher — Measurement, evaluation and limits of vibration severity IEC 60034-14:2003 |
EN 60034-14:1996 Note 2.1 |
Date expired (1.12.2006) |
|
|
EN 60034-14:2004/A1:2007 IEC 60034-14:2003/A1:2007 |
Note 3 |
Date expired (1.6.2010) |
|
Cenelec |
EN 60051-1:1998 Direct acting indicating analogue electrical measuring instruments and their accessories — Part 1: Definitions and general requirements common to all parts IEC 60051-1:1997 |
EN 60051-1:1989 + A1:1995 + A2:1995 Note 2.1 |
Date expired (1.9.1999) |
|
Cenelec |
EN 60051-2:1989 Direct acting indicating analogue electrical measuring instruments and their accessories — Part 2: Special requirements for ammeters and voltmeters IEC 60051-2:1984 |
|
|
|
Cenelec |
EN 60051-3:1989 Direct acting indicating analogue electrical measuring instruments and their accessories — Part 3: Special requirements for wattmeters and varmeters IEC 60051-3:1984 |
|
|
|
|
EN 60051-3:1989/A1:1995 IEC 60051-3:1984/A1:1994 |
Note 3 |
Date expired (1.10.1995) |
|
Cenelec |
EN 60051-4:1989 Direct acting indicating analogue electrical measuring instruments and their accessories — Part 4: Special requirements for frequency meters IEC 60051-4:1984 |
|
|
|
Cenelec |
EN 60051-5:1989 Direct acting indicating analogue electrical measuring instruments and their accessories — Part 5: Special requirements for phase meters, power factor meters and synchroscopes IEC 60051-5:1985 |
|
|
|
Cenelec |
EN 60051-6:1989 Direct acting indicating analogue electrical measuring instruments and their accessories — Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters IEC 60051-6:1984 |
|
|
|
Cenelec |
EN 60051-7:1989 Direct acting indicating analogue electrical measuring instruments and their accessories — Part 7: Special requirements for multi-function instruments IEC 60051-7:1984 |
|
|
|
Cenelec |
EN 60051-8:1989 Direct acting indicating analogue electrical measuring instruments and their accessories — Part 8: Special requirements for accessories IEC 60051-8:1984 |
|
|
|
Cenelec |
EN 60051-9:1989 Direct acting indicating analogue electrical-measuring instruments and their accessories — Part 9: Recommended test methods IEC 60051-9:1988 |
|
|
|
|
EN 60051-9:1989/A2:1995 IEC 60051-9:1988/A2:1995 |
Note 3 |
Date expired (15.2.1996) |
|
|
EN 60051-9:1989/A1:1995 IEC 60051-9:1988/A1:1994 |
Note 3 |
Date expired (15.2.1996) |
|
Cenelec |
EN 60061-1:1993 Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps IEC 60061-1:1969 (Modified) + IEC 60061-1L:1987 (Modified) + IEC 60061-1N:1992 (Modified) |
|
|
|
|
EN 60061-1:1993/A1:1995 IEC 60061-1P:1994 |
Note 3 |
Date expired (1.12.1995) |
|
|
EN 60061-1:1993/A3:1995 IEC 60061-1R:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-1:1993/A2:1995 IEC 60061-1Q:1994 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-1:1993/A4:1996 IEC 60061-1S:1996 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60061-1:1993/A5:1996 IEC 60061-1T:1996 |
Note 3 |
Date expired (1.4.1997) |
|
|
EN 60061-1:1993/A6:1996 IEC 60061-1U:1996 |
Note 3 |
Date expired (1.7.1997) |
|
|
EN 60061-1:1993/A7:1997 IEC 60061-1V:1997 |
Note 3 |
Date expired (1.2.1998) |
|
|
EN 60061-1:1993/A21:1998 IEC 60061-1:1969/A21:1998 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-1:1993/A22:1999 IEC 60061-1:1969/A22:1999 |
Note 3 |
Date expired (1.4.2006) |
|
|
EN 60061-1:1993/A23:1999 IEC 60061-1:1969/A23:1999 |
Note 3 |
Date expired (1.8.2006) |
|
|
EN 60061-1:1993/A24:2000 IEC 60061-1:1969/A24:2000 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60061-1:1993/A26:2001 IEC 60061-1:1969/A26:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-1:1993/A25:2001 IEC 60061-1:1969/A25:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-1:1993/A27:2001 IEC 60061-1:1969/A27:2001 |
Note 3 |
Date expired (1.11.2004) |
|
|
EN 60061-1:1993/A28:2002 IEC 60061-1:1969/A28:2002 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-1:1993/A29:2002 IEC 60061-1:1969/A29:2002 |
Note 3 |
Date expired (1.6.2005) |
|
|
EN 60061-1:1993/A30:2002 IEC 60061-1:1969/A30:2002 |
Note 3 |
Date expired (1.11.2005) |
|
|
EN 60061-1:1993/A31:2003 IEC 60061-1:1969/A31:2003 |
Note 3 |
Date expired (1.6.2006) |
|
|
EN 60061-1:1993/A32:2003 IEC 60061-1:1969/A32:2003 |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 60061-1:1993/A33:2003 IEC 60061-1:1969/A33:2003 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60061-1:1993/A34:2004 IEC 60061-1:1969/A34:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60061-1:1993/A35:2005 IEC 60061-1:1969/A35:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60061-1:1993/A36:2005 IEC 60061-1:1969/A36:2005 |
Note 3 |
Date expired (1.10.2008) |
|
|
EN 60061-1:1993/A37:2006 IEC 60061-1:1969/A37:2006 |
Note 3 |
Date expired (1.9.2009) |
|
|
EN 60061-1:1993/A38:2007 IEC 60061-1:1969/A38:2006 |
Note 3 |
Date expired (1.3.2010) |
|
|
EN 60061-1:1993/A39:2007 IEC 60061-1:1969/A39:2007 |
Note 3 |
Date expired (1.5.2010) |
|
|
EN 60061-1:1993/A40:2008 IEC 60061-1:1969/A40:2008 |
Note 3 |
Date expired (1.8.2011) |
|
|
EN 60061-1:1993/A41:2009 IEC 60061-1:1969/A41:2009 |
Note 3 |
Date expired (1.6.2012) |
|
|
EN 60061-1:1993/A42:2009 IEC 60061-1:1969/A42:2009 |
Note 3 |
Date expired (1.9.2012) |
|
|
EN 60061-1:1993/A44:2010 IEC 60061-1:1969/A44:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-1:1993/A43:2010 IEC 60061-1:1969/A43:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-1:1993/A46:2011 IEC 60061-1:1969/A46:2011 |
Note 3 |
17.8.2014 |
|
|
EN 60061-1:1993/A45:2011 IEC 60061-1:1969/A45:2011 |
Note 3 |
17.8.2014 |
|
|
EN 60061-1:1993/A47:2012 IEC 60061-1:1969/A47:2011 |
Note 3 |
3.3.2015 |
|
|
EN 60061-1:1993/A48:2012 IEC 60061-1:1969/A48:2012 |
Note 3 |
1.11.2015 |
|
|
EN 60061-1:1993/A49:2013 IEC 60061-1:1969/A49:2013 |
Note 3 |
2.4.2016 |
|
EN 60061-1, - 2, - 3, and - 4 series have a particular structure and therefore the date of cessation of presumption of conformity indicated only affects the types modified by the different amendments. |
|||
|
Cenelec |
EN 60061-2:1993 Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 2: Lampholders IEC 60061-2:1969 (Modified) + IEC 60061-2H:1987 (Modified) + IEC 60061-2I:1990 (Modified) + IEC 60061-2K:1992 (Modified) |
|
|
|
|
EN 60061-2:1993/A33:2005 IEC 60061-2:1969/A33:2005 |
Note 3 |
Date expired (1.10.2008) |
|
|
EN 60061-2:1993/A34:2006 IEC 60061-2:1969/A34:2006 |
Note 3 |
Date expired (1.9.2009) |
|
|
EN 60061-2:1993/A35:2007 IEC 60061-2:1969/A35:2006 |
Note 3 |
Date expired (1.3.2010) |
|
|
EN 60061-2:1993/A36:2007 IEC 60061-2:1969/A36:2007 |
Note 3 |
Date expired (1.5.2010) |
|
|
EN 60061-2:1993/A37:2008 IEC 60061-2:1969/A37:2008 |
Note 3 |
Date expired (1.8.2011) |
|
|
EN 60061-2:1993/A38:2009 IEC 60061-2:1969/A38:2009 |
Note 3 |
Date expired (1.6.2012) |
|
|
EN 60061-2:1993/A39:2009 IEC 60061-2:1969/A39:2009 |
Note 3 |
Date expired (1.9.2012) |
|
|
EN 60061-2:1993/A40:2010 IEC 60061-2:1969/A40:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-2:1993/A41:2010 IEC 60061-2:1969/A41:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-2:1993/A43:2011 IEC 60061-2:1969/A43:2011 |
Note 3 |
29.10.2014 |
|
|
EN 60061-2:1993/A42:2011 IEC 60061-2:1969/A42:2011 |
Note 3 |
29.10.2014 |
|
|
EN 60061-2:1993/A44:2012 IEC 60061-2:1969/A44:2011 |
Note 3 |
19.1.2015 |
|
|
EN 60061-2:1993/A45:2012 IEC 60061-2:1969/A45:2012 |
Note 3 |
1.11.2015 |
|
|
EN 60061-2:1993/A46:2013 IEC 60061-2:1969/A46:2013 |
Note 3 |
2.4.2016 |
|
|
EN 60061-2:1993/A1:1995 IEC 60061-2L:1994 |
Note 3 |
Date expired (1.12.1995) |
|
|
EN 60061-2:1993/A3:1995 IEC 60061-2N:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-2:1993/A2:1995 IEC 60061-2M:1994 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-2:1993/A4:1996 IEC 60061-2P:1996 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60061-2:1993/A5:1996 IEC 60061-2Q:1996 |
Note 3 |
Date expired (1.4.1997) |
|
|
EN 60061-2:1993/A6:1996 IEC 60061-2R:1996 |
Note 3 |
Date expired (1.7.1997) |
|
|
EN 60061-2:1993/A7:1997 IEC 60061-2S:1997 |
Note 3 |
Date expired (1.2.1998) |
|
|
EN 60061-2:1993/A18:1998 IEC 60061-2:1969/A18:1998 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-2:1993/A19:1999 IEC 60061-2:1969/A19:1999 |
Note 3 |
Date expired (1.4.2006) |
|
|
EN 60061-2:1993/A20:1999 IEC 60061-2:1969/A20:1999 |
Note 3 |
Date expired (1.8.2006) |
|
|
EN 60061-2:1993/A21:2000 IEC 60061-2:1969/A21:2000 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60061-2:1993/A22:2001 IEC 60061-2:1969/A22:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-2:1993/A23:2001 IEC 60061-2:1969/A23:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-2:1993/A24:2001 IEC 60061-2:1969/A24:2001 |
Note 3 |
Date expired (1.11.2004) |
|
|
EN 60061-2:1993/A25:2002 IEC 60061-2:1969/A25:2002 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-2:1993/A26:2002 IEC 60061-2:1969/A26:2002 |
Note 3 |
Date expired (1.6.2005) |
|
|
EN 60061-2:1993/A27:2002 IEC 60061-2:1969/A27:2002 |
Note 3 |
Date expired (1.11.2005) |
|
|
EN 60061-2:1993/A28:2003 IEC 60061-2:1969/A28:2003 |
Note 3 |
Date expired (1.6.2006) |
|
|
EN 60061-2:1993/A29:2003 IEC 60061-2:1969/A29:2003 |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 60061-2:1993/A30:2003 IEC 60061-2:1969/A30:2003 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60061-2:1993/A31:2004 IEC 60061-2:1969/A31:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60061-2:1993/A32:2005 IEC 60061-2:1969/A32:2004 |
Note 3 |
Date expired (1.12.2007) |
|
EN 60061-1, - 2, - 3, and - 4 series have a particular structure and therefore the date of cessation of presumption of conformity indicated only affects the types modified by the different amendments. |
|||
|
Cenelec |
EN 60061-3:1993 Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 3: Gauges IEC 60061-3:1969 (Modified) + IEC 60061-3M:1992 (Modified) |
|
|
|
|
EN 60061-3:1993/A1:1995 IEC 60061-3N:1994 |
Note 3 |
Date expired (1.12.1995) |
|
|
EN 60061-3:1993/A3:1995 IEC 60061-3Q:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-3:1993/A2:1995 IEC 60061-3P:1994 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-3:1993/A4:1996 IEC 60061-3R:1996 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60061-3:1993/A5:1996 IEC 60061-3S:1996 |
Note 3 |
Date expired (1.4.1997) |
|
|
EN 60061-3:1993/A6:1996 IEC 60061-3T:1996 |
Note 3 |
Date expired (1.7.1997) |
|
|
EN 60061-3:1993/A7:1997 IEC 60061-3U:1997 |
Note 3 |
Date expired (1.2.1998) |
|
|
EN 60061-3:1993/A20:1998 IEC 60061-3:1969/A20:1998 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-3:1993/A21:1999 IEC 60061-3:1969/A21:1999 |
Note 3 |
Date expired (1.4.2006) |
|
|
EN 60061-3:1993/A22:1999 IEC 60061-3:1969/A22:1999 |
Note 3 |
Date expired (1.8.2006) |
|
|
EN 60061-3:1993/A23:2000 IEC 60061-3:1969/A23:2000 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60061-3:1993/A25:2001 IEC 60061-3:1969/A25:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-3:1993/A24:2001 IEC 60061-3:1969/A24:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-3:1993/A26:2001 IEC 60061-3:1969/A26:2001 |
Note 3 |
Date expired (1.11.2004) |
|
|
EN 60061-3:1993/A27:2002 IEC 60061-3:1969/A27:2002 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-3:1993/A28:2002 IEC 60061-3:1969/A28:2002 |
Note 3 |
Date expired (1.6.2005) |
|
|
EN 60061-3:1993/A29:2002 IEC 60061-3:1969/A29:2002 |
Note 3 |
Date expired (1.11.2005) |
|
|
EN 60061-3:1993/A30:2003 IEC 60061-3:1969/A30:2003 |
Note 3 |
Date expired (1.6.2006) |
|
|
EN 60061-3:1993/A31:2003 IEC 60061-3:1969/A31:2003 |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 60061-3:1993/A32:2003 IEC 60061-3:1969/A32:2003 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60061-3:1993/A33:2004 IEC 60061-3:1969/A33:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60061-3:1993/A34:2005 IEC 60061-3:1969/A34:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60061-3:1993/A35:2005 IEC 60061-3:1969/A35:2005 |
Note 3 |
Date expired (1.11.2008) |
|
|
EN 60061-3:1993/A36:2006 IEC 60061-3:1969/A36:2006 |
Note 3 |
Date expired (1.9.2009) |
|
|
EN 60061-3:1993/A37:2007 IEC 60061-3:1969/A37:2006 |
Note 3 |
Date expired (1.3.2010) |
|
|
EN 60061-3:1993/A38:2007 IEC 60061-3:1969/A38:2007 |
Note 3 |
Date expired (1.5.2010) |
|
|
EN 60061-3:1993/A39:2009 IEC 60061-3:1969/A39:2009 |
Note 3 |
Date expired (1.6.2012) |
|
|
EN 60061-3:1993/A40:2009 IEC 60061-3:1969/A40:2009 |
Note 3 |
Date expired (1.9.2012) |
|
|
EN 60061-3:1993/A42:2010 IEC 60061-3:1969/A42:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-3:1993/A41:2010 IEC 60061-3:1969/A41:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-3:1993/A44:2011 IEC 60061-3:1969/A44:2011 |
Note 3 |
29.10.2014 |
|
|
EN 60061-3:1993/A43:2011 IEC 60061-3:1969/A43:2011 |
Note 3 |
29.10.2014 |
|
|
EN 60061-3:1993/A45:2012 IEC 60061-3:1969/A45:2011 |
Note 3 |
24.1.2015 |
|
|
EN 60061-3:1993/A46:2012 IEC 60061-3:1969/A46:2012 |
Note 3 |
1.11.2015 |
|
|
EN 60061-3:1993/A47:2013 IEC 60061-3:1969/A47:2013 |
Note 3 |
2.4.2016 |
|
EN 60061-1, - 2, - 3, and - 4 series have a particular structure and therefore the date of cessation of presumption of conformity indicated only affects the types modified by the different amendments. |
|||
|
Cenelec |
EN 60061-4:1992 Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 4: Guidelines and general information IEC 60061-4:1990 (Modified) |
|
|
|
|
EN 60061-4:1992/A1:1995 IEC 60061-4A:1992 + IEC 60061-4B:1994 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-4:1992/A3:1995 IEC 60061-4D:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-4:1992/A2:1995 IEC 60061-4C:1994 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-4:1992/A5:1998 IEC 60061-4:1990/A5:1998 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-4:1992/A6:2000 IEC 60061-4:1990/A6:2000 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60061-4:1992/A7:2001 IEC 60061-4:1990/A7:2001 |
Note 3 |
Date expired (1.11.2004) |
|
|
EN 60061-4:1992/A8:2003 IEC 60061-4:1990/A8:2003 |
Note 3 |
Date expired (1.6.2006) |
|
|
EN 60061-4:1992/A9:2005 IEC 60061-4:1990/A9:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60061-4:1992/A10:2006 IEC 60061-4:1990/A10:2006 |
Note 3 |
Date expired (1.9.2009) |
|
|
EN 60061-4:1992/A11:2007 IEC 60061-4:1990/A11:2007 |
Note 3 |
Date expired (1.11.2010) |
|
|
EN 60061-4:1992/A12:2009 IEC 60061-4:1990/A12:2009 |
Note 3 |
Date expired (1.9.2012) |
|
|
EN 60061-4:1992/A13:2011 IEC 60061-4:1990/A13:2011 |
Note 3 |
Date expired (5.10.2013) |
|
|
EN 60061-4:1992/A14:2011 IEC 60061-4:1990/A14:2011 |
Note 3 |
26.9.2014 |
|
EN 60061-1, - 2, - 3, and - 4 series have a particular structure and therefore the date of cessation of presumption of conformity indicated only affects the types modified by the different amendments. |
|||
|
Cenelec |
EN 60065:2002 Audio, video and similar electronic apparatus — Safety requirements IEC 60065:2001 (Modified) |
EN 60065:1998 Note 2.1 |
Date expired (1.3.2007) |
|
|
EN 60065:2002/A1:2006 IEC 60065:2001/A1:2005 (Modified) |
Note 3 |
Date expired (1.12.2008) |
|
|
EN 60065:2002/A11:2008 |
Note 3 |
Date expired (1.7.2010) |
|
|
EN 60065:2002/A2:2010 IEC 60065:2001/A2:2010 (Modified) |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60065:2002/A12:2011 |
Note 3 |
Date expired (24.1.2013) |
|
|
EN 60065:2002/AC:2007 |
|
|
|
Cenelec |
EN 60110-1:1998 Power capacitors for induction heating installations — Part 1: General IEC 60110-1:1998 |
HD 207 S1:1977 Note 2.1 |
Date expired (1.5.2001) |
|
Cenelec |
EN 60127-1:2006 Miniature fuses — Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links IEC 60127-1:2006 |
EN 60127-1:1991 + A1:1999 + A2:2003 Note 2.1 |
Date expired (1.7.2009) |
|
|
EN 60127-1:2006/A1:2011 IEC 60127-1:2006/A1:2011 |
Note 3 |
25.5.2014 |
|
Cenelec |
EN 60127-2:2003 Miniature fuses — Part 2: Cartridge fuse-links IEC 60127-2:2003 |
EN 60127-2:1991 + A1:1995 + A2:2000 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60127-2:2003/A1:2003 IEC 60127-2:2003/A1:2003 |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 60127-2:2003/A2:2010 IEC 60127-2:2003/A2:2010 |
Note 3 |
Date expired (1.7.2013) |
|
Cenelec |
EN 60127-3:1996 Miniature fuses — Part 3: Sub-miniature fuse-links IEC 60127-3:1988 + A1:1991 |
EN 60127-3:1991 Note 2.1 |
Date expired (1.12.1996) |
|
|
EN 60127-3:1996/A2:2003 IEC 60127-3:1988/A2:2002 |
Note 3 |
Date expired (1.2.2006) |
|
|
EN 60127-3:1996/AC:1996 |
|
|
|
Cenelec |
EN 60127-4:2005 Miniature fuses — Part 4: Universal modular fuse-links (UMF) — Through-hole and surface mount types IEC 60127-4:2005 |
EN 60127-4:1996 + A1:2002 + A2:2003 Note 2.1 |
Date expired (1.3.2008) |
|
|
EN 60127-4:2005/A1:2009 IEC 60127-4:2005/A1:2008 |
Note 3 |
Date expired (1.2.2012) |
|
|
EN 60127-4:2005/A2:2013 IEC 60127-4:2005/A2:2012 |
Note 3 |
11.1.2016 |
|
Cenelec |
EN 60127-6:1994 Miniature fuses — Part 6: Fuse-holders for miniature fuse-links IEC 60127-6:1994 |
|
|
|
|
EN 60127-6:1994/A1:1996 IEC 60127-6:1994/A1:1996 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60127-6:1994/A2:2003 IEC 60127-6:1994/A2:2002 |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60127-7:2013 Miniature fuses — Part 7: Miniature fuse-links for special applications IEC 60127-7:2013 |
|
|
|
Cenelec |
EN 60143-2:1994 Series capacitors for power systems — Part 2: Protective equipment for series capacitor banks IEC 60143-2:1994 |
|
|
|
Cenelec |
EN 60143-2:2013 Series capacitors for power systems — Part 2: Protective equipment for series capacitor banks IEC 60143-2:2012 |
EN 60143-2:1994 Note 2.1 |
15.1.2016 |
|
Cenelec |
EN 60155:1995 Glow-starters for fluorescent lamps IEC 60155:1993 |
|
|
|
|
EN 60155:1995/A1:1995 IEC 60155:1993/A1:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60155:1995/A2:2007 IEC 60155:1993/A2:2006 |
Note 3 |
Date expired (1.12.2009) |
|
Cenelec |
EN 60204-1:2006 Safety of machinery — Electrical equipment of machines — Part 1: General requirements IEC 60204-1:2005 (Modified) |
EN 60204-1:1997 Note 2.1 |
Date expired (1.6.2009) |
|
|
EN 60204-1:2006/A1:2009 IEC 60204-1:2005/A1:2008 |
Note 3 |
Date expired (1.2.2012) |
|
|
EN 60204-1:2006/AC:2010 |
|
|
|
Cenelec |
EN 60204-32:2008 Safety of machinery — Electrical equipment of machines — Part 32: Requirements for hoisting machines IEC 60204-32:2008 |
|
|
|
Cenelec |
EN 60215:1989 Safety requirements for radio transmitting equipment IEC 60215:1987 |
|
|
|
|
EN 60215:1989/A1:1992 IEC 60215:1987/A1:1990 |
Note 3 |
Date expired (1.6.1993) |
|
|
EN 60215:1989/A2:1994 IEC 60215:1987/A2:1993 |
Note 3 |
Date expired (15.7.1995) |
|
Cenelec |
EN 60228:2005 Conductors of insulated cables IEC 60228:2004 |
|
|
|
|
EN 60228:2005/AC:2005 |
|
|
|
Cenelec |
EN 60238:2004 Edison screw lampholders IEC 60238:2004 |
EN 60238:1998 + A1:1999 + A2:2002 Note 2.1 |
Date expired (1.10.2007) |
|
|
EN 60238:2004/A1:2008 IEC 60238:2004/A1:2008 |
Note 3 |
Date expired (1.8.2011) |
|
|
EN 60238:2004/A2:2011 IEC 60238:2004/A2:2011 |
Note 3 |
Date expired (30.3.2014) |
|
|
EN 60238:2004/AC:2005 |
|
|
|
Cenelec |
EN 60252-1:2001 AC motor capacitors — Part 1: General — Performance, testing and rating — Safety requirements — Guide for installation and operation IEC 60252-1:2001 |
EN 60252:1994 Note 2.1 |
Date expired (1.10.2004) |
|
Cenelec |
EN 60252-1:2011 AC motor capacitors — Part 1: General — Performance, testing and rating — Safety requirements — Guidance for installation and operation IEC 60252-1:2010 |
EN 60252-1:2001 Note 2.1 |
Date expired (2.1.2014) |
|
|
EN 60252-1:2011/A1:2013 IEC 60252-1:2010/A1:2013 |
Note 3 |
3.10.2016 |
|
Cenelec |
EN 60252-2:2003 AC motor capacitors — Part 2: Motor start capacitors IEC 60252-2:2003 |
|
|
|
Cenelec |
EN 60252-2:2011 AC motor capacitors — Part 2: Motor start capacitors IEC 60252-2:2010 |
EN 60252-2:2003 Note 2.1 |
Date expired (19.1.2014) |
|
|
EN 60252-2:2011/A1:2013 IEC 60252-2:2010/A1:2013 |
Note 3 |
3.10.2016 |
|
Cenelec |
EN 60255-5:2001 Electrical relays — Part 5: Insulation coordination for measuring relays and protection equipment — Requirements and tests IEC 60255-5:2000 |
|
|
|
Cenelec |
EN 60255-27:2005 Measuring relays and protection equipment — Part 27: Product safety requirements IEC 60255-27:2005 |
|
|
|
Cenelec |
EN 60269-1:2007 Low-voltage fuses — Part 1: General requirements IEC 60269-1:2006 |
EN 60269-1:1998 + A1:2005 + EN 60269-2:1995 + A1:1998 + A2:2002 + EN 60269-3:1995 + A1:2003 Note 2.1 |
Date expired (1.3.2010) |
|
|
EN 60269-1:2007/A1:2009 IEC 60269-1:2006/A1:2009 |
Note 3 |
Date expired (1.7.2012) |
|
Cenelec |
EN 60269-4:2009 Low-voltage fuses — Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices IEC 60269-4:2009 |
EN 60269-4:2007 Note 2.1 |
Date expired (1.9.2012) |
|
|
EN 60269-4:2009/A1:2012 IEC 60269-4:2009/A1:2012 |
Note 3 |
20.6.2015 |
|
Cenelec |
EN 60269-6:2011 Low-voltage fuses — Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems IEC 60269-6:2010 |
|
|
|
Cenelec |
EN 60309-1:1999 Plugs, socket-outlets and couplers for industrial purposes — Part 1: General requirements IEC 60309-1:1999 |
EN 60309-1:1997 Note 2.1 |
Date expired (1.4.2002) |
|
|
EN 60309-1:1999/A1:2007 IEC 60309-1:1999/A1:2005 (Modified) |
Note 3 |
Date expired (1.11.2009) |
|
|
EN 60309-1:1999/A2:2012 IEC 60309-1:1999/A2:2012 |
Note 3 |
13.7.2015 |
|
Cenelec |
EN 60309-2:1999 Plugs, socket-outlets and couplers for industrial purposes — Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories IEC 60309-2:1999 |
EN 60309-2:1998 Note 2.1 |
Date expired (1.5.2002) |
|
|
EN 60309-2:1999/A1:2007 IEC 60309-2:1999/A1:2005 (Modified) |
Note 3 |
Date expired (1.11.2009) |
|
|
EN 60309-2:1999/A2:2012 IEC 60309-2:1999/A2:2012 |
Note 3 |
19.4.2015 |
|
Cenelec |
EN 60309-4:2007 Plugs, socket-outlets and couplers for industrial purposes — Part 4: Switched socket-outlets and connectors with or without interlock IEC 60309-4:2006 (Modified) |
|
|
|
|
EN 60309-4:2007/A1:2012 IEC 60309-4:2006/A1:2012 |
Note 3 |
19.4.2015 |
|
Cenelec |
EN 60320-1:2001 Appliance couplers for household and similar general purposes — Part 1: General requirements IEC 60320-1:2001 |
EN 60320-1:1996 + A1:1996 + A2:1998 Note 2.1 |
Date expired (1.7.2004) |
|
|
EN 60320-1:2001/A1:2007 IEC 60320-1:2001/A1:2007 |
Note 3 |
Date expired (1.10.2010) |
|
Cenelec |
EN 60320-2-1:2000 Appliance couplers for household and similar general purposes — Part 2-1: Sewing machine couplers IEC 60320-2-1:2000 |
EN 60320-2-1:1987 Note 2.1 |
Date expired (1.9.2003) |
|
Cenelec |
EN 60320-2-2:1998 Appliance couplers for household and similar general purposes — Part 2-2: Interconnection couplers for household and similar equipment IEC 60320-2-2:1998 |
EN 60320-2-2:1991 Note 2.1 |
Date expired (1.7.2001) |
|
Cenelec |
EN 60320-2-4:2006 Appliance couplers for household and similar general purposes — Part 2-4: Appliance couplers dependent on appliance weight for engagement IEC 60320-2-4:2005 |
|
|
|
|
EN 60320-2-4:2006/A1:2009 IEC 60320-2-4:2005/A1:2009 |
Note 3 |
Date expired (1.11.2012) |
|
Cenelec |
EN 60332-1-1:2004 Tests on electric and optical fibre cables under fire conditions — Part 1-1: Test for vertical flame propagation for a single insulated wire or cable — Apparatus IEC 60332-1-1:2004 |
EN 50265-1:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60332-1-2:2004 Tests on electric and optical fibre cables under fire conditions — Part 1-2: Test for vertical flame propagation for a single insulated wire or cable — Procedure for 1 kW pre-mixed flame IEC 60332-1-2:2004 |
EN 50265-2-1:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60332-1-3:2004 Tests on electric and optical fibre cables under fire conditions — Part 1-3: Test for vertical flame propagation for a single insulated wire or cable — Procedure for determination of flaming droplets/particles IEC 60332-1-3:2004 |
|
|
|
Cenelec |
EN 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions — Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable — Apparatus IEC 60332-2-1:2004 |
EN 50265-1:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60332-2-2:2004 Tests on electric and optical fibre cables under fire conditions — Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable — Procedure for diffusion flame IEC 60332-2-2:2004 |
EN 50265-2-2:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60332-3-10:2009 Tests on electric and optical fibre cables under fire conditions — Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables — Apparatus IEC 60332-3-10:2000 + A1:2008 |
EN 50266-1:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60332-3-21:2009 Tests on electric and optical fibre cables under fire conditions — Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables — Category A F/R IEC 60332-3-21:2000 (Modified) |
EN 50266-2-1:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60332-3-22:2009 Tests on electric and optical fibre cables under fire conditions — Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables — Category A IEC 60332-3-22:2000 + A1:2008 |
EN 50266-2-2:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60332-3-23:2009 Tests on electric and optical fibre cables under fire conditions — Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables — Category B IEC 60332-3-23:2000 + A1:2008 |
EN 50266-2-3:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60332-3-24:2009 Tests on electric and optical fibre cables under fire conditions — Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables — Category C IEC 60332-3-24:2000 + A1:2008 |
EN 50266-2-4:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60332-3-25:2009 Tests on electric and optical fibre cables under fire conditions — Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables — Category D IEC 60332-3-25:2000 + A1:2008 |
EN 50266-2-5:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60335-1:1994 Safety of household and similar electrical appliances — Part 1: General requirements IEC 60335-1:1991 (Modified) |
EN 60335-1:1988 + A2:1988 + A5:1989 + A6:1989 + A51:1991 + A52:1992 + A53:1992 + A54:1992 + A55:1993 + A56:1995 Note 2.1 |
Date expired (1.9.2007) |
|
|
EN 60335-1:1994/A11:1995 |
Note 3 |
Date expired (1.10.2010) |
|
|
EN 60335-1:1994/A12:1996 |
Note 3 |
Date expired (1.4.1999) |
|
|
EN 60335-1:1994/A1:1996 IEC 60335-1:1991/A1:1994 (Modified) |
Note 3 |
Date expired (1.4.1999) |
|
|
EN 60335-1:1994/A13:1998 |
Note 3 |
Date expired (1.12.2000) |
|
|
EN 60335-1:1994/A14:1998 |
Note 3 |
Date expired (1.7.2001) |
|
|
EN 60335-1:1994/A15:2000 |
Note 3 |
Date expired (1.7.2001) |
|
|
EN 60335-1:1994/A2:2000 IEC 60335-1:1991/A2:1999 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60335-1:1994/A16:2001 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60335-1:1994/A2:2000/AC:2004 |
|
|
|
|
EN 60335-1:1994/AC:1995 |
|
|
|
|
EN 60335-1:1994/AC:2009 |
|
|
|
Cenelec |
EN 60335-1:2002 Household and similar electrical appliances — Safety — Part 1: General requirements IEC 60335-1:2001 (Modified) |
EN 60335-1:1994 and its amendments Note 2.1 |
Date expired (1.9.2007) |
|
|
EN 60335-1:2002/A11:2004 |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 60335-1:2002/A1:2004 IEC 60335-1:2001/A1:2004 |
Note 3 |
Date expired (1.10.2007) |
|
|
EN 60335-1:2002/A12:2006 |
Note 3 |
Date expired (1.10.2007) |
|
|
EN 60335-1:2002/A2:2006 IEC 60335-1:2001/A2:2006 |
Note 3 |
Date expired (1.7.2009) |
|
|
EN 60335-1:2002/A13:2008 |
Note 3 |
Date expired (1.7.2009) |
|
|
EN 60335-1:2002/A14:2010 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-1:2002/A15:2011 |
Note 3 |
Date expired (2.5.2014) |
|
|
EN 60335-1:2002/A12:2006/AC:2007 |
|
|
|
|
EN 60335-1:2002/AC:2010 |
|
|
|
|
EN 60335-1:2002/A1:2004/AC:2007 |
|
|
|
|
EN 60335-1:2002/AC:2009 |
|
|
|
Cenelec |
EN 60335-1:2012 Household and similar electrical appliances — Safety — Part 1: General requirements IEC 60335-1:2010 (Modified) |
EN 60335-1:2002 and its amendments Note 2.1 |
21.11.2014 |
|
|
EN 60335-1:2012/AC:2014 |
|
|
|
Cenelec |
EN 60335-2-2:2003 Household and similar electrical appliances — Safety — Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances IEC 60335-2-2:2002 (Modified) |
EN 60335-2-2:1995 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-2:2003/A1:2004 IEC 60335-2-2:2002/A1:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60335-2-2:2003/A2:2006 IEC 60335-2-2:2002/A2:2006 (Modified) |
Note 3 |
Date expired (1.10.2009) |
|
|
EN 60335-2-2:2003/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-2:2003/A11:2010/AC:2012 |
|
|
|
Cenelec |
EN 60335-2-2:2010 Household and similar electrical appliances — Safety — Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances IEC 60335-2-2:2009 |
EN 60335-2-2:2003 and its amendments Note 2.1 |
1.2.2015 |
|
|
EN 60335-2-2:2010/A11:2012 |
Note 3 |
1.2.2015 |
|
|
EN 60335-2-2:2010/A1:2013 IEC 60335-2-2:2009/A1:2012 |
Note 3 |
20.12.2015 |
|
Cenelec |
EN 60335-2-3:2002 Household and similar electrical appliances — Safety — Part 2-3: Particular requirements for electric irons IEC 60335-2-3:2002 |
EN 60335-2-3:1995 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.10.2005) |
|
|
EN 60335-2-3:2002/A1:2005 IEC 60335-2-3:2002/A1:2004 |
Note 3 |
Date expired (1.4.2008) |
|
|
EN 60335-2-3:2002/A2:2008 IEC 60335-2-3:2002/A2:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-3:2002/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-3:2002/A11:2010/AC:2012 |
|
|
|
Cenelec |
EN 60335-2-4:2002 Household and similar electrical appliances — Safety — Part 2-4: Particular requirements for spin extractors IEC 60335-2-4:2002 |
EN 60335-2-4:1995 + A1:1997 Note 2.1 |
Date expired (1.8.2007) |
|
|
EN 60335-2-4:2002/A1:2004 IEC 60335-2-4:2002/A1:2004 |
Note 3 |
Date expired (1.3.2007) |
|
|
EN 60335-2-4:2002/A2:2006 IEC 60335-2-4:2002/A2:2006 |
Note 3 |
Date expired (1.4.2009) |
|
|
EN 60335-2-4:2002/AC:2006 |
|
|
|
Cenelec |
EN 60335-2-4:2010 Household and similar electrical appliances — Safety — Part 2-4: Particular requirements for spin extractors IEC 60335-2-4:2008 (Modified) |
EN 60335-2-4:2002 and its amendments Note 2.1 |
1.11.2014 |
|
Cenelec |
EN 60335-2-5:2003 Household and similar electrical appliances — Safety — Part 2-5: Particular requirements for dishwashers IEC 60335-2-5:2002 (Modified) |
EN 60335-2-5:1995 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-5:2003/A1:2005 IEC 60335-2-5:2002/A1:2005 |
Note 3 |
Date expired (1.2.2008) |
|
|
EN 60335-2-5:2003/A2:2008 IEC 60335-2-5:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
EN 60335-2-5:2003/A11:2009 |
Note 3 |
Date expired (1.11.2011) |
|
|
EN 60335-2-5:2003/A12:2012 |
Note 3 |
9.7.2015 |
|
Cenelec |
EN 60335-2-6:2003 Household and similar electrical appliances — Safety — Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances IEC 60335-2-6:2002 (Modified) |
EN 60335-2-6:1999 + A1:2001 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-6:2003/A1:2005 IEC 60335-2-6:2002/A1:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60335-2-6:2003/A2:2008 IEC 60335-2-6:2002/A2:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-6:2003/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-6:2003/A12:2012 |
Note 3 |
6.6.2014 |
|
|
EN 60335-2-6:2003/A13:2013 |
Note 3 |
20.11.2015 |
|
|
EN 60335-2-6:2003/AC:2007 |
|
|
|
|
EN 60335-2-6:2003/A11:2010/AC:2012 |
|
|
|
Cenelec |
EN 60335-2-7:2003 Household and similar electrical appliances — Safety — Part 2-7: Particular requirements for washing machines IEC 60335-2-7:2002 (Modified) |
EN 60335-2-7:2001 Note 2.1 |
Date expired (1.8.2007) |
|
|
EN 60335-2-7:2003/A1:2004 IEC 60335-2-7:2002/A1:2004 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60335-2-7:2003/A2:2006 IEC 60335-2-7:2002/A2:2006 |
Note 3 |
Date expired (1.4.2009) |
|
|
EN 60335-2-7:2003/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-7:2003/A11:2010/AC:2012 |
|
|
|
|
EN 60335-2-7:2003/AC:2003 |
|
|
|
Cenelec |
EN 60335-2-7:2010 Household and similar electrical appliances — Safety — Part 2-7: Particular requirements for washing machines IEC 60335-2-7:2008 (Modified) |
EN 60335-2-7:2003 and its amendments Note 2.1 |
1.11.2014 |
|
|
EN 60335-2-7:2010/A1:2013 IEC 60335-2-7:2008/A1:2011 (Modified) |
Note 3 |
20.11.2015 |
|
|
EN 60335-2-7:2010/A11:2013 |
Note 3 |
21.11.2014 |
|
Cenelec |
EN 60335-2-8:2003 Household and similar electrical appliances — Safety — Part 2-8: Particular requirements for shavers, hair clippers and similar appliances IEC 60335-2-8:2002 (Modified) |
EN 60335-2-8:1995 + A1:2001 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-8:2003/A1:2005 IEC 60335-2-8:2002/A1:2005 |
Note 3 |
Date expired (1.9.2008) |
|
|
EN 60335-2-8:2003/A2:2008 IEC 60335-2-8:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
Cenelec |
EN 60335-2-9:2003 Household and similar electrical appliances — Safety — Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances IEC 60335-2-9:2002 (Modified) |
EN 60335-2-9:1995 + A1:1998 + A2:2000 + A11:2000 + A12:2002 + A13:2002 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-9:2003/A1:2004 IEC 60335-2-9:2002/A1:2004 |
Note 3 |
Date expired (1.3.2007) |
|
|
EN 60335-2-9:2003/A2:2006 IEC 60335-2-9:2002/A2:2006 |
Note 3 |
Date expired (1.4.2009) |
|
|
EN 60335-2-9:2003/A12:2007 |
Note 3 |
Date expired (1.10.2010) |
|
|
EN 60335-2-9:2003/A13:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60335-2-9:2003/A13:2010/AC:2011 |
|
|
|
|
EN 60335-2-9:2003/A13:2010/AC:2012 |
|
|
|
Cenelec |
EN 60335-2-10:2003 Household and similar electrical appliances — Safety — Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines IEC 60335-2-10:2002 |
EN 60335-2-10:1995 Note 2.1 |
Date expired (1.4.2006) |
|
|
EN 60335-2-10:2003/A1:2008 IEC 60335-2-10:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-11:2003 Household and similar electrical appliances — Safety — Part 2-11: Particular requirements for tumble dryers IEC 60335-2-11:2002 (Modified) |
EN 60335-2-11:2001 + A1:2001 + A11:2002 Note 2.1 |
Date expired (1.8.2007) |
|
|
EN 60335-2-11:2003/A1:2004 IEC 60335-2-11:2002/A1:2003 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60335-2-11:2003/A2:2006 IEC 60335-2-11:2002/A2:2006 |
Note 3 |
Date expired (1.5.2009) |
|
|
EN 60335-2-11:2003/A11:2008 |
Note 3 |
Date expired (1.7.2011) |
|
|
EN 60335-2-11:2003/AC:2003 |
|
|
|
Cenelec |
EN 60335-2-11:2010 Household and similar electrical appliances — Safety — Part 2-11: Particular requirements for tumble dryers IEC 60335-2-11:2008 (Modified) |
EN 60335-2-11:2003 and its amendments Note 2.1 |
1.4.2015 |
|
|
EN 60335-2-11:2010/A11:2012 |
Note 3 |
9.7.2015 |
|
Cenelec |
EN 60335-2-12:2003 Household and similar electrical appliances — Safety — Part 2-12: Particular requirements for warming plates and similar appliances IEC 60335-2-12:2002 |
EN 60335-2-12:1995 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-12:2003/A1:2008 IEC 60335-2-12:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-13:2003 Household and similar electrical appliances — Safety — Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances IEC 60335-2-13:2002 (Modified) |
EN 60335-2-13:1995 + A2:1998 Note 2.1 |
Date expired (1.4.2006) |
|
|
EN 60335-2-13:2003/A1:2004 IEC 60335-2-13:2002/A1:2004 |
Note 3 |
Date expired (1.7.2007) |
|
|
EN 60335-2-13:2003/A2:2008 IEC 60335-2-13:2002/A2:2008 |
Note 3 |
Date expired (1.3.2011) |
|
Cenelec |
EN 60335-2-13:2010 Household and similar electrical appliances — Safety — Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances IEC 60335-2-13:2009 |
EN 60335-2-13:2003 and its amendments Note 2.1 |
1.2.2015 |
|
|
EN 60335-2-13:2010/A11:2012 |
Note 3 |
9.7.2015 |
|
Cenelec |
EN 60335-2-14:2006 Household and similar electrical appliances — Safety — Part 2-14: Particular requirements for kitchen machines IEC 60335-2-14:2006 (Modified) |
EN 60335-2-14:2003 Note 2.1 |
Date expired (1.7.2009) |
|
|
EN 60335-2-14:2006/A1:2008 IEC 60335-2-14:2006/A1:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
EN 60335-2-14:2006/A11:2012 |
Note 3 |
23.1.2015 |
|
|
EN 60335-2-14:2006/AC:2007 |
|
|
|
|
EN 60335-2-14:2006/A11:2012/AC:2013 |
|
|
|
Cenelec |
EN 60335-2-15:2002 Household and similar electrical appliances — Safety — Part 2-15: Particular requirements for appliances for heating liquids IEC 60335-2-15:2002 |
EN 60335-2-15:1996 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.7.2007) |
|
|
EN 60335-2-15:2002/A1:2005 IEC 60335-2-15:2002/A1:2005 |
Note 3 |
Date expired (1.9.2008) |
|
|
EN 60335-2-15:2002/A2:2008 IEC 60335-2-15:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
EN 60335-2-15:2002/A11:2012 |
Note 3 |
23.1.2015 |
|
|
EN 60335-2-15:2002/AC:2006 |
|
|
|
|
EN 60335-2-15:2002/A11:2012/AC:2013 |
|
|
|
Cenelec |
EN 60335-2-16:2003 Household and similar electrical appliances — Safety — Part 2-16: Particular requirements for food waste disposers IEC 60335-2-16:2002 (Modified) |
EN 60335-2-16:1996 Note 2.1 |
Date expired (1.7.2006) |
|
|
EN 60335-2-16:2003/A1:2008 IEC 60335-2-16:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-16:2003/A2:2012 IEC 60335-2-16:2002/A2:2011 |
Note 3 |
18.10.2014 |
|
Cenelec |
EN 60335-2-17:2002 Household and similar electrical appliances — Safety — Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances IEC 60335-2-17:2002 |
EN 60335-2-17:1999 Note 2.1 |
Date expired (1.11.2005) |
|
|
EN 60335-2-17:2002/A1:2006 IEC 60335-2-17:2002/A1:2006 |
Note 3 |
Date expired (1.3.2009) |
|
|
EN 60335-2-17:2002/A2:2009 IEC 60335-2-17:2002/A2:2008 (Modified) |
Note 3 |
Date expired (1.9.2013) |
|
Cenelec |
EN 60335-2-17:2013 Household and similar electrical appliances — Safety — Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances IEC 60335-2-17:2012 |
EN 60335-2-17:2002 and its amendments Note 2.1 |
30.4.2015 |
|
Cenelec |
EN 60335-2-21:2003 Household and similar electrical appliances — Safety — Part 2-21: Particular requirements for storage water heaters IEC 60335-2-21:2002 (Modified) |
EN 60335-2-21:1999 + A1:2000 + A11:2002 + A12:2002 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-21:2003/A1:2005 IEC 60335-2-21:2002/A1:2004 |
Note 3 |
Date expired (1.11.2007) |
|
|
EN 60335-2-21:2003/A2:2008 IEC 60335-2-21:2002/A2:2008 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60335-2-21:2003/AC:2010 |
|
|
|
|
EN 60335-2-21:2003/AC:2007 |
|
|
|
Cenelec |
EN 60335-2-23:2003 Household and similar electrical appliances — Safety — Part 2-23: Particular requirements for appliances for skin or hair care IEC 60335-2-23:2003 |
EN 60335-2-23:1996 + A1:2001 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-23:2003/A1:2008 IEC 60335-2-23:2003/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-23:2003/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-23:2003/A11:2010/AC:2012 |
|
|
|
Cenelec |
EN 60335-2-24:2003 Household and similar electrical appliances — Safety — Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers IEC 60335-2-24:2002 |
EN 60335-2-24:2000 + A11:2004 Note 2.1 |
Date expired (1.8.2007) |
|
|
EN 60335-2-24:2003/A11:2004 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60335-2-24:2003/A1:2005 IEC 60335-2-24:2002/A1:2005 |
Note 3 |
Date expired (1.3.2008) |
|
|
EN 60335-2-24:2003/A2:2007 IEC 60335-2-24:2002/A2:2007 |
Note 3 |
Date expired (1.2.2010) |
|
|
EN 60335-2-24:2003/A12:2009 |
Note 3 |
Date expired (1.11.2012) |
|
|
EN 60335-2-24:2003/AC:2010 |
|
|
|
Cenelec |
EN 60335-2-24:2010 Household and similar electrical appliances — Safety — Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers IEC 60335-2-24:2010 |
EN 60335-2-24:2003 and its amendments Note 2.1 |
1.3.2015 |
|
Cenelec |
EN 60335-2-25:2002 Household and similar electrical appliances — Safety — Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens IEC 60335-2-25:2002 |
EN 60335-2-25:1996 + A1:2000 Note 2.1 |
Date expired (1.10.2005) |
|
|
EN 60335-2-25:2002/A1:2005 IEC 60335-2-25:2002/A1:2005 |
Note 3 |
Date expired (1.6.2008) |
|
|
EN 60335-2-25:2002/A2:2006 IEC 60335-2-25:2002/A2:2006 |
Note 3 |
Date expired (1.7.2009) |
|
|
EN 60335-2-25:2002/A11:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60335-2-25:2002/A11:2010/AC:2012 |
|
|
|
Cenelec |
EN 60335-2-25:2012 Household and similar electrical appliances — Safety — Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens IEC 60335-2-25:2010 (Modified) |
EN 60335-2-25:2002 and its amendments Note 2.1 |
28.11.2014 |
|
Cenelec |
EN 60335-2-26:2003 Household and similar electrical appliances — Safety — Part 2-26: Particular requirements for clocks IEC 60335-2-26:2002 |
EN 60335-2-26:1996 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-26:2003/A1:2008 IEC 60335-2-26:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-27:2010 Household and similar electrical appliances — Safety — Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation IEC 60335-2-27:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) |
EN 60335-2-27:2003 + A1:2008 + A2:2008 |
Date expired (1.10.2011) |
|
|
EN 60335-2-27:2010/AC:2010 |
|
|
|
Cenelec |
EN 60335-2-27:2013 Household and similar electrical appliances — Safety — Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation IEC 60335-2-27:2009 (Modified) |
EN 60335-2-27:2010 Note 2.1 |
21.11.2014 |
|
Cenelec |
EN 60335-2-28:2003 Household and similar electrical appliances — Safety — Part 2-28: Particular requirements for sewing machines IEC 60335-2-28:2002 (Modified) |
EN 60335-2-28:1996 Note 2.1 |
Date expired (1.4.2006) |
|
|
EN 60335-2-28:2003/A1:2008 IEC 60335-2-28:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-29:2004 Household and similar electrical appliances — Safety — Part 2-29: Particular requirements for battery chargers IEC 60335-2-29:2002 + A1:2004 |
EN 60335-2-29:1996 + A11:1997 Note 2.1 |
Date expired (1.6.2007) |
|
|
EN 60335-2-29:2004/A2:2010 IEC 60335-2-29:2002/A2:2009 |
Note 3 |
1.2.2015 |
|
Cenelec |
EN 60335-2-30:2003 Household and similar electrical appliances — Safety — Part 2-30: Particular requirements for room heaters IEC 60335-2-30:2002 (Modified) |
EN 60335-2-30:1997 + A1:2000 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-30:2003/A1:2004 IEC 60335-2-30:2002/A1:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60335-2-30:2003/A2:2007 IEC 60335-2-30:2002/A2:2007 |
Note 3 |
Date expired (1.5.2010) |
|
Cenelec |
EN 60335-2-30:2009 Household and similar electrical appliances — Safety — Part 2-30: Particular requirements for room heaters IEC 60335-2-30:2009 |
EN 60335-2-30:2003 and its amendments Note 2.1 |
1.12.2014 |
|
|
EN 60335-2-30:2009/A11:2012 |
Note 3 |
20.2.2015 |
|
|
EN 60335-2-30:2009/AC:2010 |
|
|
|
Cenelec |
EN 60335-2-31:2003 Household and similar electrical appliances — Safety — Part 2-31: Particular requirements for range hoods and other cooking fume extractors IEC 60335-2-31:2002 |
EN 60335-2-31:1997 + A1:1999 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-31:2003/A1:2006 IEC 60335-2-31:2002/A1:2006 |
Note 3 |
Date expired (1.5.2009) |
|
|
EN 60335-2-31:2003/A2:2009 IEC 60335-2-31:2002/A2:2008 |
Note 3 |
Date expired (1.3.2014) |
|
|
EN 60335-2-31:2003/AC:2005 |
|
|
|
Cenelec |
EN 60335-2-32:2003 Household and similar electrical appliances — Safety — Part 2-32: Particular requirements for massage appliances IEC 60335-2-32:2002 |
EN 60335-2-32:1995 + A1:2000 Note 2.1 |
Date expired (1.4.2006) |
|
|
EN 60335-2-32:2003/A1:2008 IEC 60335-2-32:2002/A1:2008 |
Note 3 |
Date expired (1.7.2013) |
|
Cenelec |
EN 60335-2-34:2002 Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors IEC 60335-2-34:2002 |
EN 60335-2-34:2000 + A11:2004 Note 2.1 |
Date expired (1.12.2005) |
|
|
EN 60335-2-34:2002/A11:2004 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60335-2-34:2002/A1:2005 IEC 60335-2-34:2002/A1:2004 |
Note 3 |
Date expired (1.2.2008) |
|
|
EN 60335-2-34:2002/A2:2009 IEC 60335-2-34:2002/A2:2008 |
Note 3 |
Date expired (1.12.2011) |
|
Cenelec |
EN 60335-2-34:2013 Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors IEC 60335-2-34:2012 |
EN 60335-2-34:2002 and its amendments Note 2.1 |
27.6.2015 |
|
Cenelec |
EN 60335-2-35:2002 Household and similar electrical appliances — Safety — Part 2-35: Particular requirements for instantaneous water heaters IEC 60335-2-35:2002 |
EN 60335-2-35:1998 + A1:2000 Note 2.1 |
Date expired (1.11.2005) |
|
|
EN 60335-2-35:2002/A1:2007 IEC 60335-2-35:2002/A1:2006 |
Note 3 |
Date expired (1.11.2009) |
|
|
EN 60335-2-35:2002/A2:2011 IEC 60335-2-35:2002/A2:2009 (Modified) |
Note 3 |
Date expired (24.1.2014) |
|
|
EN 60335-2-35:2002/AC:2005 |
|
|
|
Cenelec |
EN 60335-2-36:2002 Household and similar electrical appliances — Safety — Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements IEC 60335-2-36:2002 |
EN 60335-2-36:2000 Note 2.1 |
Date expired (1.12.2005) |
|
|
EN 60335-2-36:2002/A1:2004 IEC 60335-2-36:2002/A1:2004 |
Note 3 |
Date expired (1.7.2007) |
|
|
EN 60335-2-36:2002/A2:2008 IEC 60335-2-36:2002/A2:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60335-2-36:2002/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-36:2002/AC:2007 |
|
|
|
Cenelec |
EN 60335-2-37:2002 Household and similar electrical appliances — Safety — Part 2-37: Particular requirements for commercial electric deep fat fryers IEC 60335-2-37:2002 |
EN 60335-2-37:2000 Note 2.1 |
Date expired (1.12.2005) |
|
|
EN 60335-2-37:2002/A1:2008 IEC 60335-2-37:2002/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60335-2-37:2002/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-37:2002/AC:2007 |
|
|
|
Cenelec |
EN 60335-2-38:2003 Household and similar electrical appliances — Safety — Part 2-38: Particular requirements for commercial electric griddles and griddle grills IEC 60335-2-38:2002 |
EN 60335-2-38:2000 Note 2.1 |
Date expired (1.2.2006) |
|
|
EN 60335-2-38:2003/A1:2008 IEC 60335-2-38:2002/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60335-2-38:2003/AC:2007 |
|
|
|
Cenelec |
EN 60335-2-39:2003 Household and similar electrical appliances — Safety — Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans IEC 60335-2-39:2002 |
EN 60335-2-39:2000 Note 2.1 |
Date expired (1.2.2006) |
|
|
EN 60335-2-39:2003/A1:2004 IEC 60335-2-39:2002/A1:2004 |
Note 3 |
Date expired (1.7.2007) |
|
|
EN 60335-2-39:2003/A2:2008 IEC 60335-2-39:2002/A2:2008 |
Note 3 |
Date expired (1.7.2011) |
|
|
EN 60335-2-39:2003/AC:2007 |
|
|
|
Cenelec |
EN 60335-2-40:2003 Household and similar electrical appliances — Safety — Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers IEC 60335-2-40:2002 (Modified) |
EN 60335-2-40:1997 + A1:2000 + A11:2004 Note 2.1 |
Date expired (1.3.2007) |
|
|
EN 60335-2-40:2003/A11:2004 |
Note 3 |
Date expired (1.3.2007) |
|
|
EN 60335-2-40:2003/A12:2005 |
Note 3 |
Date expired (1.11.2007) |
|
|
EN 60335-2-40:2003/A1:2006 IEC 60335-2-40:2002/A1:2005 (Modified) |
Note 3 |
Date expired (1.9.2008) |
|
|
EN 60335-2-40:2003/A2:2009 IEC 60335-2-40:2002/A2:2005 (Modified) |
Note 3 |
Date expired (1.3.2012) |
|
|
EN 60335-2-40:2003/A13:2012 |
Note 3 |
11.7.2014 |
|
|
EN 60335-2-40:2003/AC:2006 |
|
|
|
|
EN 60335-2-40:2003/AC:2010 |
|
|
|
|
EN 60335-2-40:2003/A13:2012/AC:2013 |
|
|
|
Cenelec |
EN 60335-2-41:2003 Household and similar electrical appliances — Safety — Part 2-41: Particular requirements for pumps IEC 60335-2-41:2002 |
EN 60335-2-41:1996 + A1:2001 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-41:2003/A1:2004 IEC 60335-2-41:2002/A1:2004 |
Note 3 |
Date expired (1.3.2007) |
|
|
EN 60335-2-41:2003/A2:2010 IEC 60335-2-41:2002/A2:2009 |
Note 3 |
1.2.2015 |
|
Cenelec |
EN 60335-2-42:2003 Household and similar electrical appliances — Safety — Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens IEC 60335-2-42:2002 |
EN 60335-2-42:2000 Note 2.1 |
Date expired (1.2.2006) |
|
|
EN 60335-2-42:2003/A1:2008 IEC 60335-2-42:2002/A1:2008 |
Note 3 |
Date expired (1.7.2011) |
|
|
EN 60335-2-42:2003/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-42:2003/AC:2007 |
|
|
|
Cenelec |
EN 60335-2-43:2003 Household and similar electrical appliances — Safety — Part 2-43: Particular requirements for clothes dryers and towel rails IEC 60335-2-43:2002 |
EN 60335-2-43:1997 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-43:2003/A1:2006 IEC 60335-2-43:2002/A1:2005 |
Note 3 |
Date expired (1.11.2008) |
|
|
EN 60335-2-43:2003/A2:2008 IEC 60335-2-43:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
Cenelec |
EN 60335-2-44:2002 Household and similar electrical appliances — Safety — Part 2-44: Particular requirements for ironers IEC 60335-2-44:2002 |
EN 60335-2-44:1997 Note 2.1 |
Date expired (1.11.2005) |
|
|
EN 60335-2-44:2002/A1:2008 IEC 60335-2-44:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-44:2002/A2:2012 IEC 60335-2-44:2002/A2:2011 |
Note 3 |
4.10.2014 |
|
Cenelec |
EN 60335-2-45:2002 Household and similar electrical appliances — Safety — Part 2-45: Particular requirements for portable heating tools and similar appliances IEC 60335-2-45:2002 |
EN 60335-2-45:1996 Note 2.1 |
Date expired (1.12.2005) |
|
|
EN 60335-2-45:2002/A1:2008 IEC 60335-2-45:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-45:2002/A2:2012 IEC 60335-2-45:2002/A2:2011 |
Note 3 |
4.10.2014 |
|
Cenelec |
EN 60335-2-47:2003 Household and similar electrical appliances — Safety — Part 2-47: Particular requirements for commercial electric boiling pans IEC 60335-2-47:2002 |
EN 60335-2-47:2000 Note 2.1 |
Date expired (1.2.2006) |
|
|
EN 60335-2-47:2003/A1:2008 IEC 60335-2-47:2002/A1:2008 |
Note 3 |
Date expired (1.6.2011) |
|
|
EN 60335-2-47:2003/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-47:2003/AC:2007 |
|
|
|
Cenelec |
EN 60335-2-48:2003 Household and similar electrical appliances — Safety — Part 2-48: Particular requirements for commercial electric grillers and toasters IEC 60335-2-48:2002 |
EN 60335-2-48:2000 Note 2.1 |
Date expired (1.2.2006) |
|
|
EN 60335-2-48:2003/A1:2008 IEC 60335-2-48:2002/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60335-2-48:2003/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-48:2003/AC:2007 |
|
|
|
Cenelec |
EN 60335-2-49:2003 Household and similar electrical appliances — Safety — Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm IEC 60335-2-49:2002 |
EN 60335-2-49:2000 Note 2.1 |
Date expired (1.2.2006) |
|
|
EN 60335-2-49:2003/A1:2008 IEC 60335-2-49:2002/A1:2008 |
Note 3 |
Date expired (1.7.2011) |
|
|
EN 60335-2-49:2003/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-49:2003/AC:2007 |
|
|
|
Cenelec |
EN 60335-2-50:2003 Household and similar electrical appliances — Safety — Part 2-50: Particular requirements for commercial electric bains-marie IEC 60335-2-50:2002 |
EN 60335-2-50:2000 Note 2.1 |
Date expired (1.2.2006) |
|
|
EN 60335-2-50:2003/A1:2008 IEC 60335-2-50:2002/A1:2007 |
Note 3 |
Date expired (1.2.2011) |
|
|
EN 60335-2-50:2003/AC:2007 |
|
|
|
Cenelec |
EN 60335-2-51:2003 Household and similar electrical appliances — Safety — Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations IEC 60335-2-51:2002 |
EN 60335-2-51:1997 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-51:2003/A1:2008 IEC 60335-2-51:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-51:2003/A2:2012 IEC 60335-2-51:2002/A2:2011 |
Note 3 |
18.10.2014 |
|
Cenelec |
EN 60335-2-52:2003 Household and similar electrical appliances — Safety — Part 2-52: Particular requirements for oral hygiene appliances IEC 60335-2-52:2002 |
EN 60335-2-52:1996 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-52:2003/A1:2008 IEC 60335-2-52:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-52:2003/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-52:2003/A11:2010/AC:2012 |
|
|
|
Cenelec |
EN 60335-2-53:2003 Household and similar electrical appliances — Safety — Part 2-53: Particular requirements for sauna heating appliances IEC 60335-2-53:2002 |
EN 60335-2-53:1997 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-53:2003/A1:2007 IEC 60335-2-53:2002/A1:2007 |
Note 3 |
Date expired (1.2.2010) |
|
Cenelec |
EN 60335-2-53:2011 Household and similar electrical appliances — Safety — Part 2-53: Particular requirements for sauna heating appliances and infrared cabins IEC 60335-2-53:2011 |
EN 60335-2-53:2003 and its amendment Note 2.1 |
25.5.2014 |
|
Cenelec |
EN 60335-2-54:2008 Household and similar electrical appliances — Safety — Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam IEC 60335-2-54:2008 |
EN 60335-2-54:2003 + A1:2004 + A2:2007 + A11:2006 |
Date expired (1.10.2013) |
|
|
EN 60335-2-54:2008/A11:2012 |
Note 3 |
20.2.2015 |
|
Cenelec |
EN 60335-2-55:2003 Household and similar electrical appliances — Safety — Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds IEC 60335-2-55:2002 |
EN 60335-2-55:1997 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-55:2003/A1:2008 IEC 60335-2-55:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-56:2003 Household and similar electrical appliances — Safety — Part 2-56: Particular requirements for projectors and similar appliances IEC 60335-2-56:2002 |
EN 60335-2-56:1997 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-56:2003/A1:2008 IEC 60335-2-56:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-59:2003 Household and similar electrical appliances — Safety — Part 2-59: Particular requirements for insect killers IEC 60335-2-59:2002 (Modified) |
EN 60335-2-59:1997 + A1:2001 + A11:2000 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-59:2003/A1:2006 IEC 60335-2-59:2002/A1:2006 |
Note 3 |
Date expired (1.3.2009) |
|
|
EN 60335-2-59:2003/A2:2009 IEC 60335-2-59:2002/A2:2009 |
Note 3 |
1.10.2014 |
|
Cenelec |
EN 60335-2-60:2003 Household and similar electrical appliances — Safety — Part 2-60: Particular requirements for whirlpool baths and whirlpool spas IEC 60335-2-60:2002 |
EN 60335-2-60:1997 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-60:2003/A1:2005 IEC 60335-2-60:2002/A1:2004 |
Note 3 |
Date expired (1.2.2008) |
|
|
EN 60335-2-60:2003/A2:2008 IEC 60335-2-60:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
EN 60335-2-60:2003/A11:2010 |
Note 3 |
Date expired (1.11.2012) |
|
|
EN 60335-2-60:2003/A12:2010 |
Note 3 |
Date expired (1.11.2010) |
|
Cenelec |
EN 60335-2-61:2003 Household and similar electrical appliances — Safety — Part 2-61: Particular requirements for thermal-storage room heaters IEC 60335-2-61:2002 |
EN 60335-2-61:1996 + A1:2000 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-61:2003/A1:2005 IEC 60335-2-61:2002/A1:2005 |
Note 3 |
Date expired (1.5.2008) |
|
|
EN 60335-2-61:2003/A2:2008 IEC 60335-2-61:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
Cenelec |
EN 60335-2-62:2003 Household and similar electrical appliances — Safety — Part 2-62: Particular requirements for commercial electric rinsing sinks IEC 60335-2-62:2002 |
EN 60335-2-62:1997 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.2.2006) |
|
|
EN 60335-2-62:2003/A1:2008 IEC 60335-2-62:2002/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60335-2-62:2003/AC:2007 |
|
|
|
Cenelec |
EN 60335-2-65:2003 Household and similar electrical appliances — Safety — Part 2-65: Particular requirements for air-cleaning appliances IEC 60335-2-65:2002 |
EN 60335-2-65:1995 + A1:2001 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-65:2003/A1:2008 IEC 60335-2-65:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-65:2003/A11:2012 |
Note 3 |
21.12.2014 |
|
Cenelec |
EN 60335-2-66:2003 Household and similar electrical appliances — Safety — Part 2-66: Particular requirements for water-bed heaters IEC 60335-2-66:2002 |
EN 60335-2-66:1995 + A1:2001 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-66:2003/A1:2008 IEC 60335-2-66:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-66:2003/A2:2012 IEC 60335-2-66:2002/A2:2011 |
Note 3 |
4.10.2014 |
|
Cenelec |
EN 60335-2-71:2003 Household and similar electrical appliances — Safety — Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals IEC 60335-2-71:2002 (Modified) |
EN 60335-2-71:1995 + A1:1998 + A2:1999 Note 2.1 |
Date expired (1.6.2006) |
|
|
EN 60335-2-71:2003/A1:2007 IEC 60335-2-71:2002/A1:2007 |
Note 3 |
Date expired (1.4.2010) |
|
Cenelec |
EN 60335-2-73:2003 Household and similar electrical appliances — Safety — Part 2-73: Particular requirements for fixed immersion heaters IEC 60335-2-73:2002 (Modified) |
EN 60335-2-73:1996 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-73:2003/A1:2006 IEC 60335-2-73:2002/A1:2006 |
Note 3 |
Date expired (1.3.2009) |
|
|
EN 60335-2-73:2003/A2:2009 IEC 60335-2-73:2002/A2:2009 |
Note 3 |
1.10.2014 |
|
Cenelec |
EN 60335-2-74:2003 Household and similar electrical appliances — Safety — Part 2-74: Particular requirements for portable immersion heaters IEC 60335-2-74:2002 |
EN 60335-2-74:1996 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-74:2003/A1:2006 IEC 60335-2-74:2002/A1:2006 |
Note 3 |
Date expired (1.6.2009) |
|
|
EN 60335-2-74:2003/A2:2009 IEC 60335-2-74:2002/A2:2009 |
Note 3 |
1.10.2014 |
|
Cenelec |
EN 60335-2-75:2004 Household and similar electrical appliances — Safety — Part 2-75: Particular requirements for commercial dispensing appliances and vending machines IEC 60335-2-75:2002 (Modified) |
EN 60335-2-63:1993 + EN 60335-2-75:2002 Note 2.1 |
Date expired (1.3.2007) |
|
|
EN 60335-2-75:2004/A1:2005 IEC 60335-2-75:2002/A1:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60335-2-75:2004/A11:2006 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60335-2-75:2004/A2:2008 IEC 60335-2-75:2002/A2:2008 |
Note 3 |
Date expired (1.8.2011) |
|
|
EN 60335-2-75:2004/A12:2010 |
Note 3 |
Date expired (1.11.2010) |
|
Cenelec |
EN 60335-2-78:2003 Household and similar electrical appliances — Safety — Part 2-78: Particular requirements for outdoor barbecues IEC 60335-2-78:2002 |
EN 60335-2-78:1997 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-78:2003/A1:2008 IEC 60335-2-78:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-80:2003 +6Household and similar electrical appliances — Safety — Part 2-80: Particular requirements for fans IEC 60335-2-80:2002 |
EN 60335-2-80:1997 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-80:2003/A1:2004 IEC 60335-2-80:2002/A1:2004 |
Note 3 |
Date expired (1.3.2007) |
|
|
EN 60335-2-80:2003/A2:2009 IEC 60335-2-80:2002/A2:2008 |
Note 3 |
Date expired (1.3.2014) |
|
Cenelec |
EN 60335-2-81:2003 Household and similar electrical appliances — Safety — Part 2-81: Particular requirements for foot warmers and heating mats IEC 60335-2-81:2002 |
EN 60335-2-81:1997 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60335-2-81:2003/A1:2007 IEC 60335-2-81:2002/A1:2007 |
Note 3 |
Date expired (1.2.2010) |
|
|
EN 60335-2-81:2003/A2:2012 IEC 60335-2-81:2002/A2:2011 |
Note 3 |
18.10.2014 |
|
Cenelec |
EN 60335-2-82:2003 Household and similar electrical appliances — Safety — Part 2-82: Particular requirements for amusement machines and personal service machines IEC 60335-2-82:2002 |
EN 60335-2-82:2000 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-82:2003/A1:2008 IEC 60335-2-82:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-83:2002 Household and similar electrical appliances — Safety — Part 2-83: Particular requirements for heated gullies for roof drainage IEC 60335-2-83:2001 |
|
|
|
|
EN 60335-2-83:2002/A1:2008 IEC 60335-2-83:2001/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-84:2003 Household and similar electrical appliances — Safety — Part 2-84: Particular requirements for toilets IEC 60335-2-84:2002 |
EN 60335-2-84:1998 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-84:2003/A1:2008 IEC 60335-2-84:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-85:2003 Household and similar electrical appliances — Safety — Part 2-85: Particular requirements for fabric steamers IEC 60335-2-85:2002 |
EN 60335-2-85:1998 + A1:2000 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-85:2003/A1:2008 IEC 60335-2-85:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-86:2003 Household and similar electrical appliances — Safety — Part 2-86: Particular requirements for electric fishing machines IEC 60335-2-86:2002 (Modified) |
EN 60335-2-86:2000 Note 2.1 |
Date expired (1.8.2007) |
|
|
EN 60335-2-86:2003/A1:2005 IEC 60335-2-86:2002/A1:2005 |
Note 3 |
Date expired (1.5.2008) |
|
Cenelec |
EN 60335-2-87:2002 Household and similar electrical appliances — Safety — Part 2-87: Particular requirements for electrical animal-stunning equipment IEC 60335-2-87:2002 |
EN 60335-2-87:1999 Note 2.1 |
Date expired (1.10.2005) |
|
|
EN 60335-2-87:2002/A1:2007 IEC 60335-2-87:2002/A1:2007 |
Note 3 |
Date expired (1.4.2010) |
|
Cenelec |
EN 60335-2-88:2002 Household and similar electrical appliances — Safety — Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems IEC 60335-2-88:2002 |
EN 60335-2-88:1997 Note 2.1 |
Date expired (1.12.2005) |
|
Cenelec |
EN 60335-2-90:2006 Household and similar electrical appliances — Safety — Part 2-90: Particular requirements for commercial microwave ovens IEC 60335-2-90:2006 |
EN 60335-2-90:2002 + A1:2003 Note 2.1 |
Date expired (1.3.2009) |
|
|
EN 60335-2-90:2006/A1:2010 IEC 60335-2-90:2006/A1:2010 |
Note 3 |
Date expired (1.9.2013) |
|
Cenelec |
EN 60335-2-96:2002 Household and similar electrical appliances — Safety — Part 2-96: Particular requirements for flexible sheet heating elements for room heating IEC 60335-2-96:2002 |
|
|
|
|
EN 60335-2-96:2002/A1:2004 IEC 60335-2-96:2002/A1:2003 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60335-2-96:2002/A2:2009 IEC 60335-2-96:2002/A2:2008 |
Note 3 |
Date expired (1.12.2013) |
|
Cenelec |
EN 60335-2-97:2006 Household and similar electrical appliances — Safety — Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment IEC 60335-2-97:2002 (Modified) + A1:2004 (Modified) |
EN 60335-2-97:2000 + A11:2006 Note 2.1 |
Date expired (1.4.2009) |
|
|
EN 60335-2-97:2006/A11:2008 |
Note 3 |
Date expired (1.10.2011) |
|
|
EN 60335-2-97:2006/A2:2010 IEC 60335-2-97:2002/A2:2008 (Modified) |
Note 3 |
Date expired (1.11.2012) |
|
Cenelec |
EN 60335-2-98:2003 Household and similar electrical appliances — Safety — Part 2-98: Particular requirements for humidifiers IEC 60335-2-98:2002 |
EN 60335-2-98:1997 + A1:2000 Note 2.1 |
Date expired (1.5.2006) |
|
|
EN 60335-2-98:2003/A1:2005 IEC 60335-2-98:2002/A1:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60335-2-98:2003/A2:2008 IEC 60335-2-98:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
Cenelec |
EN 60335-2-101:2002 Household and similar electrical appliances — Safety — Part 2-101: Particular requirements for vaporizers IEC 60335-2-101:2002 |
|
|
|
|
EN 60335-2-101:2002/A1:2008 IEC 60335-2-101:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
Cenelec |
EN 60335-2-102:2006 Household and similar electrical appliances — Safety — Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections IEC 60335-2-102:2004 (Modified) |
EN 50165:1997 + A1:2001 Note 2.1 |
Date expired (1.4.2009) |
|
|
EN 60335-2-102:2006/A1:2010 IEC 60335-2-102:2004/A1:2008 (Modified) |
Note 3 |
1.11.2014 |
|
Cenelec |
EN 60335-2-105:2005 Household and similar electrical appliances — Safety — Part 2-105: Particular requirements for multifunctional shower cabinets IEC 60335-2-105:2004 |
|
|
|
|
EN 60335-2-105:2005/A1:2008 IEC 60335-2-105:2004/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-105:2005/A11:2010 |
Note 3 |
Date expired (1.11.2010) |
|
Cenelec |
EN 60335-2-106:2007 Household and similar electrical appliances — Safety — Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings IEC 60335-2-106:2007 |
|
|
|
Cenelec |
EN 60335-2-108:2008 Household and similar electrical appliances — Safety — Part 2-108: Particular requirements for electrolysers IEC 60335-2-108:2008 (Modified) |
|
|
|
Cenelec |
EN 60335-2-109:2010 Household and similar electrical appliances — Safety — Part 2-109: Particular requirements for UV radiation water treatment appliances IEC 60335-2-109:2010 |
|
|
|
Cenelec |
EN 60358-1:2012 Coupling capacitors and capacitor dividers — Part 1: General rules IEC 60358-1:2012 |
HD 597 S1:1992 Note 2.1 |
17.7.2015 |
|
|
EN 60358-1:2012/AC:2013 |
|
|
|
Cenelec |
EN 60360:1998 Standard method of measurement of lamp cap temperature rise IEC 60360:1998 |
EN 60360:1989 + A1:1994 + A2:1997 Note 2.1 |
Date expired (1.5.2001) |
|
Cenelec |
EN 60399:2004 Barrel thread for lampholders with shade holder ring IEC 60399:2004 |
EN 60399:1993 + A1:1997 + A2:1999 Note 2.1 |
Date expired (1.10.2007) |
|
|
EN 60399:2004/A1:2008 IEC 60399:2004/A1:2008 |
Note 3 |
Date expired (1.8.2011) |
|
Cenelec |
EN 60400:2008 Lampholders for tubular fluorescent lamps and starterholders IEC 60400:2008 |
EN 60400:2000 + A1:2002 + A2:2004 |
Date expired (1.8.2011) |
|
|
EN 60400:2008/A1:2011 IEC 60400:2008/A1:2011 |
Note 3 |
25.5.2014 |
|
Cenelec |
EN 60423:2007 Conduit systems for cable management — Outside diameters of conduits for electrical installations and threads for conduits and fittings IEC 60423:2007 |
|
|
|
Cenelec |
EN 60432-1:2000 Incandescent lamps — Safety specifications — Part 1: Tungsten filament lamps for domestic and similar general lighting purposes IEC 60432-1:1999 (Modified) |
EN 60432-1:1994 + A1:1997 + A2:1997 Note 2.1 |
Date expired (1.1.2003) |
|
|
EN 60432-1:2000/A1:2005 IEC 60432-1:1999/A1:2005 |
Note 3 |
Date expired (1.4.2008) |
|
|
EN 60432-1:2000/A2:2012 IEC 60432-1:1999/A2:2011 |
Note 3 |
11.1.2015 |
|
Cenelec |
EN 60432-2:2000 Incandescent lamps — Safety specifications — Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes IEC 60432-2:1999 (Modified) |
EN 60432-2:1994 + A1:1996 + A2:1997 Note 2.1 |
Date expired (1.1.2003) |
|
|
EN 60432-2:2000/A1:2005 IEC 60432-2:1999/A1:2005 (Modified) |
Note 3 |
Date expired (1.9.2008) |
|
|
EN 60432-2:2000/A2:2012 IEC 60432-2:1999/A2:2012 |
Note 3 |
26.4.2015 |
|
Cenelec |
EN 60432-3:2003 Incandescent lamps — Safety specifications — Part 3: Tungsten-halogen lamps (non-vehicle) IEC 60432-3:2002 |
|
|
|
|
EN 60432-3:2003/A1:2005 IEC 60432-3:2002/A1:2005 |
Note 3 |
Date expired (1.4.2008) |
|
|
EN 60432-3:2003/A2:2008 IEC 60432-3:2002/A2:2008 |
Note 3 |
Date expired (1.5.2011) |
|
Cenelec |
EN 60432-3:2013 Incandescent lamps — Safety specifications — Part 3: Tungsten-halogen lamps (non-vehicle) IEC 60432-3:2012 |
EN 60432-3:2003 and its amendments Note 2.1 |
8.8.2015 |
|
Cenelec |
EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially type-tested assemblies IEC 60439-1:1999 |
EN 60439-1:1994 + A1:1995 + A2:1997 + A11:1996 Note 2.1 |
Date expired (1.8.2002) |
|
|
EN 60439-1:1999/A1:2004 IEC 60439-1:1999/A1:2004 |
Note 3 |
Date expired (1.4.2007) |
|
Cenelec |
EN 60439-2:2000 Low-voltage switchgear and controlgear assemblies — Part 2: Particular requirements for busbar trunking systems (busways) IEC 60439-2:2000 |
EN 60439-2:1993 Note 2.1 |
Date expired (1.4.2003) |
|
|
EN 60439-2:2000/A1:2005 IEC 60439-2:2000/A1:2005 |
Note 3 |
Date expired (1.10.2008) |
|
Cenelec |
EN 60439-3:1991 Low-voltage switchgear and controlgear assemblies — Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use — Distribution boards IEC 60439-3:1990 (Modified) |
|
|
|
|
EN 60439-3:1991/A1:1994 IEC 60439-3:1990/A1:1993 |
Note 3 |
Date expired (1.12.1994) |
|
|
EN 60439-3:1991/A2:2001 IEC 60439-3:1990/A2:2001 |
Note 3 |
Date expired (1.5.2004) |
|
|
EN 60439-3:1991/AC:2009 |
|
|
|
Cenelec |
EN 60439-4:2004 Low-voltage switchgear and controlgear assemblies — Part 4: Particular requirements for assemblies for construction sites (ACS) IEC 60439-4:2004 |
EN 60439-4:1991 + A1:1995 + A2:1999 + A11:2004 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60439-5:2006 Low-voltage switchgear and controlgear assemblies — Part 5: Particular requirements for assemblies for power distribution in public networks IEC 60439-5:2006 |
EN 50300:2004 + EN 60439-5:1996 + A1:1998 Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 60477:1997 Laboratory d.c. resistors IEC 60477:1974 |
|
|
|
|
EN 60477:1997/A1:1997 IEC 60477:1974/A1:1997 |
Note 3 |
Date expired (1.9.1998) |
|
Cenelec |
EN 60477-2:1997 Laboratory resistors — Part 2: Laboratory a.c. resistors IEC 60477-2:1979 |
|
|
|
|
EN 60477-2:1997/A1:1997 IEC 60477-2:1979/A1:1997 |
Note 3 |
Date expired (1.9.1998) |
|
Cenelec |
EN 60519-1:2003 Safety in electroheat installations — Part 1: General requirements IEC 60519-1:2003 |
EN 60519-1:1993 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 60519-1:2011 Safety in electroheating installations — Part 1: General requirements IEC 60519-1:2010 |
EN 60519-1:2003 Note 2.1 |
Date expired (3.1.2014) |
|
Cenelec |
EN 60519-2:2006 Safety in electroheat installations — Part 2: Particular requirements for resistance heating equipment IEC 60519-2:2006 |
EN 60519-2:1993 Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 60519-3:2005 Safety in electroheat installations — Part 3: Particular requirements for induction and conduction heating and induction melting installations IEC 60519-3:2005 |
EN 60519-3:1995 Note 2.1 |
Date expired (1.4.2008) |
|
Cenelec |
EN 60519-4:2006 Safety in electroheat installations — Part 4: Particular requirements for arc furnace installations IEC 60519-4:2006 |
EN 60519-4:1997 + A1:2000 Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 60519-4:2013 Safety in electroheating installations — Part 4: Particular requirements for arc furnace installations IEC 60519-4:2013 |
EN 60519-4:2006 Note 2.1 |
24.7.2016 |
|
Cenelec |
EN 60519-6:2002 Safety in electroheat installations — Part 6: Specifications for safety in industrial microwave heating equipment IEC 60519-6:2002 |
|
|
|
Cenelec |
EN 60519-6:2011 Safety in electroheat installations — Part 6: Specifications for safety in industrial microwave heating equipment IEC 60519-6:2011 |
EN 60519-6:2002 Note 2.1 |
Date expired (3.3.2014) |
|
Cenelec |
EN 60519-7:2008 Safety in electroheat installations — Part 7: Particular requirements for installations with electron guns IEC 60519-7:2008 |
|
|
|
Cenelec |
EN 60519-8:2005 Safety in electroheat installations — Part 8: Particular requirements for electroslag remelting furnaces IEC 60519-8:2005 |
|
|
|
Cenelec |
EN 60519-9:2005 Safety in electroheat installations — Part 9: Particular requirements for high-frequency dielectric heating installations IEC 60519-9:2005 |
EN 60519-9:1995 Note 2.1 |
Date expired (1.10.2008) |
|
Cenelec |
EN 60519-10:2005 Safety in electroheat installations — Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications IEC 60519-10:2005 |
|
|
|
Cenelec |
EN 60519-10:2013 Safety in electroheating installations — Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications IEC 60519-10:2013 |
EN 60519-10:2005 Note 2.1 |
29.3.2016 |
|
Cenelec |
EN 60519-12:2013 Safety in electroheating installations — Part 12: Particular requirements for infrared electroheating installations IEC 60519-12:2013 |
|
|
|
Cenelec |
EN 60519-21:2009 Safety in electroheat installations — Part 21: Particular requirements for resistance heating equipment — Heating and melting glass equipment IEC 60519-21:2008 |
EN 60519-21:1998 Note 2.1 |
Date expired (1.12.2011) |
|
Cenelec |
EN 60523:1993 Direct-current potentiometers IEC 60523:1975 + A1:1979 |
|
|
|
|
EN 60523:1993/A2:1997 IEC 60523:1975/A2:1997 |
Note 3 |
Date expired (1.7.1998) |
|
Cenelec |
EN 60524:1993 Direct-current resistive volt ratio boxes IEC 60524:1975 + A1:1981 |
|
|
|
|
EN 60524:1993/A2:1997 IEC 60524:1975/A2:1997 |
Note 3 |
Date expired (1.7.1998) |
|
Cenelec |
EN 60529:1991 Degrees of protection provided by enclosures (IP Code) IEC 60529:1989 |
|
|
|
|
EN 60529:1991/A1:2000 IEC 60529:1989/A1:1999 |
Note 3 |
Date expired (1.1.2003) |
|
|
EN 60529:1991/A2:2013 IEC 60529:1989/A2:2013 |
Note 3 |
3.10.2016 |
|
|
EN 60529:1991/AC:1993 |
|
|
|
Cenelec |
EN 60564:1993 D.C. bridges for measuring resistance IEC 60564:1977 + A1:1981 |
|
|
|
|
EN 60564:1993/A2:1997 IEC 60564:1977/A2:1997 |
Note 3 |
Date expired (1.7.1998) |
|
Cenelec |
EN 60570:2003 Electrical supply track systems for luminaires IEC 60570:2003 (Modified) |
EN 60570:1996 + A1:1998 + A2:2000 + EN 60570-2-1:1994 + A1:1996 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 60598-1:2008 Luminaires — Part 1: General requirements and tests IEC 60598-1:2008 (Modified) |
EN 60598-1:2004 + A1:2006 Note 2.1 |
Date expired (12.4.2012) |
|
|
EN 60598-1:2008/A11:2009 |
Note 3 |
Date expired (1.11.2009) |
|
Cenelec |
EN 60598-2-1:1989 Luminaires — Part 2: Particular requirements — Section 1: Fixed general purpose luminaires IEC 60598-2-1:1979 + A1:1987 |
|
|
|
Cenelec |
EN 60598-2-2:1996 Luminaires — Part 2: Particular requirements — Section 2: Recessed luminaires IEC 60598-2-2:1996 |
EN 60598-2-2:1989 + A2:1996 Note 2.1 |
Date expired (1.4.1997) |
|
|
EN 60598-2-2:1996/A1:1997 IEC 60598-2-2:1996/A1:1997 |
Note 3 |
Date expired (1.12.1997) |
|
Cenelec |
EN 60598-2-2:2012 Luminaires — Part 2-2: Particular requirements — Recessed luminaires IEC 60598-2-2:2011 |
EN 60598-2-2:1996 and its amendment Note 2.1 |
13.12.2014 |
|
Cenelec |
EN 60598-2-3:2003 Luminaires — Part 2-3: Particular requirements — Luminaires for road and street lighting IEC 60598-2-3:2002 |
EN 60598-2-3:1994 + A1:1997 + A2:2001 Note 2.1 |
Date expired (1.2.2010) |
|
|
EN 60598-2-3:2003/A1:2011 IEC 60598-2-3:2002/A1:2011 |
Note 3 |
19.5.2014 |
|
|
EN 60598-2-3:2003/AC:2005 |
|
|
|
Cenelec |
EN 60598-2-4:1997 Luminaires — Part 2: Particular requirements — Section 4: Portable general purpose luminaires IEC 60598-2-4:1997 |
EN 60598-2-4:1989 + A3:1993 Note 2.1 |
Date expired (1.4.1998) |
|
Cenelec |
EN 60598-2-5:1998 Luminaires — Part 2-5: Particular requirements — Floodlights IEC 60598-2-5:1998 |
EN 60598-2-5:1989 + A2:1994 Note 2.1 |
Date expired (1.4.2005) |
|
|
EN 60598-2-5:1998/AC:1998 |
|
|
|
Cenelec |
EN 60598-2-6:1994 Luminaires — Part 2: Particular requirements — Section 6: Luminaires with built-in transformers or convertors for filament lamps IEC 60598-2-6:1994 |
EN 60598-2-6:1989 + A2:1991 Note 2.1 |
Date expired (1.7.1995) |
|
|
EN 60598-2-6:1994/A1:1997 IEC 60598-2-6:1994/A1:1996 |
Note 3 |
Date expired (1.9.1997) |
|
Cenelec |
EN 60598-2-7:1989 Luminaires — Part 2: Particular requirements — Section 7: Portable luminaires for garden use IEC 60598-2-7:1982 (Modified) + A1:1987 (Modified) |
|
|
|
|
EN 60598-2-7:1989/A2:1996 IEC 60598-2-7:1982/A2:1994 (Modified) |
Note 3 |
Date expired (1.3.1997) |
|
|
EN 60598-2-7:1989/A13:1997 |
Note 3 |
Date expired (1.3.1997) |
|
|
EN 60598-2-7:1989/A2:1996/AC:1999 |
|
|
|
Cenelec |
EN 60598-2-8:1997 Luminaires — Part 2-8: Particular requirements — Handlamps IEC 60598-2-8:1996 (Modified) |
EN 60598-2-8:1989 + A2:1993 Note 2.1 |
Date expired (1.3.1998) |
|
|
EN 60598-2-8:1997/A1:2000 IEC 60598-2-8:1996/A1:2000 |
Note 3 |
Date expired (1.5.2003) |
|
|
EN 60598-2-8:1997/A2:2008 IEC 60598-2-8:1996/A2:2007 |
Note 3 |
Date expired (1.2.2011) |
|
Cenelec |
EN 60598-2-8:2013 Luminaires — Part 2-8: Particular requirements — Handlamps IEC 60598-2-8:2013 |
EN 60598-2-8:1997 and its amendments Note 2.1 |
3.6.2016 |
|
Cenelec |
EN 60598-2-9:1989 Luminaires — Part 2: Particular requirements — Section 9: Photo and film luminaires (non-professional) IEC 60598-2-9:1987 |
|
|
|
|
EN 60598-2-9:1989/A1:1994 IEC 60598-2-9:1987/A1:1993 |
Note 3 |
Date expired (1.4.1995) |
|
Cenelec |
EN 60598-2-10:2003 Luminaires — Part 2-10: Particular requirements — Portable luminaires for children IEC 60598-2-10:2003 |
|
|
|
|
EN 60598-2-10:2003/AC:2005 |
|
|
|
Cenelec |
EN 60598-2-11:2005 Luminaires — Part 2-11: Particular requirements — Aquarium luminaires IEC 60598-2-11:2005 |
|
|
|
|
EN 60598-2-11:2005/AC:2005 |
|
|
|
Cenelec |
EN 60598-2-11:2013 Luminaires — Part 2-11: Particular requirements — Aquarium luminaires IEC 60598-2-11:2013 |
EN 60598-2-11:2005 Note 2.1 |
20.6.2016 |
|
Cenelec |
EN 60598-2-12:2006 Luminaires — Part 2-12: Particular requirements — Mains socket-outlet mounted nightlights IEC 60598-2-12:2006 |
|
|
|
|
EN 60598-2-12:2006/AC:2006 |
|
|
|
Cenelec |
EN 60598-2-12:2013 Luminaires — Part 2-12: Particular requirements — Mains socket-outlet mounted nightlights IEC 60598-2-12:2013 |
EN 60598-2-12:2006 Note 2.1 |
3.6.2016 |
|
Cenelec |
EN 60598-2-13:2006 Luminaires — Part 2-13: Particular requirements — Ground recessed luminaires IEC 60598-2-13:2006 |
|
|
|
|
EN 60598-2-13:2006/A1:2012 IEC 60598-2-13:2006/A1:2011 |
Note 3 |
11.1.2015 |
|
|
EN 60598-2-13:2006/AC:2006 |
|
|
|
Cenelec |
EN 60598-2-14:2009 Luminaires — Part 2-14: Particular requirements — Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment IEC 60598-2-14:2009 |
|
|
|
Cenelec |
EN 60598-2-17:1989 Luminaires — Part 2: Particular requirements — Section 17: Luminaires for stage lighting, television film and photographic studios (outdoor and indoor) IEC 60598-2-17:1984 + A1:1987 |
|
|
|
|
EN 60598-2-17:1989/A2:1991 IEC 60598-2-17:1984/A2:1990 |
Note 3 |
Date expired (1.11.1992) |
|
Cenelec |
EN 60598-2-19:1989 Luminaires — Part 2: Particular requirements — Section 19: Air-handling luminaires (safety requirements) IEC 60598-2-19:1981 (Modified) + A1:1987 (Modified) |
|
|
|
|
EN 60598-2-19:1989/A2:1998 IEC 60598-2-19:1981/A2:1997 |
Note 3 |
Date expired (1.10.1998) |
|
|
EN 60598-2-19:1989/AC:2005 |
|
|
|
Cenelec |
EN 60598-2-20:2010 Luminaires — Part 2-20: Particular requirements — Lighting chains IEC 60598-2-20:2010 (Modified) |
EN 60598-2-20:1997 + A1:1998 + A2:2004 |
Date expired (1.4.2013) |
|
|
EN 60598-2-20:2010/AC:2010 |
|
|
|
Cenelec |
EN 60598-2-22:1998 Luminaires — Part 2-22: Particular requirements — Luminaires for emergency lighting IEC 60598-2-22:1997 (Modified) |
EN 60598-2-22:1990 Note 2.1 |
Date expired (1.3.2008) |
|
|
EN 60598-2-22:1998/A1:2003 IEC 60598-2-22:1997/A1:2002 |
Note 3 |
Date expired (1.10.2009) |
|
|
EN 60598-2-22:1998/A2:2008 IEC 60598-2-22:1997/A2:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60598-2-22:1998/AC:2007 |
|
|
|
Cenelec |
EN 60598-2-23:1996 Luminaires — Part 2-23: Particular requirements — Extra low-voltage lighting systems for filament lamps IEC 60598-2-23:1996 |
|
|
|
|
EN 60598-2-23:1996/A1:2000 IEC 60598-2-23:1996/A1:2000 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60598-2-23:1996/AC:1997 |
|
|
|
Cenelec |
EN 60598-2-24:1998 Luminaires — Part 2: Particular requirements — Section 24: Luminaires with limited surface temperatures IEC 60598-2-24:1997 (Modified) |
|
|
|
Cenelec |
EN 60598-2-24:2013 Luminaires — Part 2-24: Particular requirements — Luminaires with limited surface temperatures IEC 60598-2-24:2013 |
EN 60598-2-24:1998 Note 2.1 |
24.7.2016 |
|
Cenelec |
EN 60598-2-25:1994 Luminaires — Part 2-25: Particular requirements — Luminaires for use in clinical areas of hospitals and health care buildings IEC 60598-2-25:1994 |
|
|
|
|
EN 60598-2-25:1994/A1:2004 IEC 60598-2-25:1994/A1:2004 |
Note 3 |
Date expired (1.11.2011) |
|
Cenelec |
EN 60618:1997 Inductive voltage dividers IEC 60618:1978 + A1:1981 |
|
|
|
|
EN 60618:1997/A2:1997 IEC 60618:1978/A2:1997 |
Note 3 |
Date expired (1.9.1998) |
|
Cenelec |
EN 60645-1:2001 Electroacoustics — Audiological equipment — Part 1: Pure-tone audiometers IEC 60645-1:2001 |
EN 60645-1:1994 Note 2.1 |
Date expired (1.10.2004) |
|
Cenelec |
EN 60645-3:2007 Electroacoustics — Audiometric equipment — Part 3: Test signals of short duration IEC 60645-3:2007 |
EN 60645-3:1995 Note 2.1 |
Date expired (1.6.2010) |
|
Cenelec |
EN 60645-4:1995 Audiometers — Part 4: Equipment for extended high-frequency audiometry IEC 60645-4:1994 |
|
|
|
Cenelec |
EN 60645-6:2010 Electroacoustics — Audiometric equipment — Part 6: Instruments for the measurement of otoacoustic emissions IEC 60645-6:2009 |
|
|
|
Cenelec |
EN 60645-7:2010 Electroacoustics — Audiometric equipment — Part 7: Instruments for the measurement of auditory brainstem responses IEC 60645-7:2009 |
|
|
|
Cenelec |
EN 60662:1993 High-pressure sodium vapour lamps IEC 60662:1980 (Modified) + A1:1986 (Modified) + A2:1987 (Modified) + A3:1990 (Modified) |
|
|
|
|
EN 60662:1993/A4:1994 IEC 60662:1980/A4:1992 |
Note 3 |
Date expired (15.3.1995) |
|
|
EN 60662:1993/A5:1994 IEC 60662:1980/A5:1993 |
Note 3 |
Date expired (15.7.1995) |
|
|
EN 60662:1993/A6:1994 IEC 60662:1980/A6:1994 |
Note 3 |
Date expired (15.7.1995) |
|
|
EN 60662:1993/A7:1995 IEC 60662:1980/A7:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60662:1993/A9:1997 IEC 60662:1980/A9:1997 |
Note 3 |
Date expired (1.4.1998) |
|
|
EN 60662:1993/A10:1997 IEC 60662:1980/A10:1997 |
Note 3 |
Date expired (1.7.1998) |
|
Cenelec |
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems — Part 1: Principles, requirements and tests IEC 60664-1:2007 |
EN 60664-1:2003 Note 2.1 |
Date expired (1.7.2010) |
|
Cenelec |
EN 60664-3:2003 Insulation coordination for equipment within low-voltage systems — Part 3: Use of coating, potting or moulding for protection against pollution IEC 60664-3:2003 |
HD 625.3 S1:1997 Note 2.1 |
Date expired (1.4.2006) |
|
|
EN 60664-3:2003/A1:2010 IEC 60664-3:2003/A1:2010 |
Note 3 |
Date expired (1.6.2013) |
|
Cenelec |
EN 60664-4:2006 Insulation coordination for equipment within low-voltage systems — Part 4: Consideration of high-frequency voltage stress IEC 60664-4:2005 |
|
|
|
|
EN 60664-4:2006/AC:2006 |
|
|
|
Cenelec |
EN 60664-5:2007 Insulation coordination for equipment within low-voltage systems — Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm IEC 60664-5:2007 |
EN 60664-5:2003 Note 2.1 |
Date expired (1.10.2010) |
|
Cenelec |
EN 60669-1:1999 Switches for household and similar fixed-electrical installations — Part 1: General requirements IEC 60669-1:1998 (Modified) |
EN 60669-1:1995 + A2:1996 Note 2.1 |
Date expired (1.9.2009) |
|
|
EN 60669-1:1999/A1:2002 IEC 60669-1:1998/A1:1999 (Modified) |
Note 3 |
Date expired (1.9.2009) |
|
|
EN 60669-1:1999/A2:2008 IEC 60669-1:1998/A2:2006 (Modified) |
Note 3 |
Date expired (1.10.2013) |
|
Cenelec |
EN 60669-2-1:2004 Switches for household and similar fixed electrical installations — Part 2-1: Particular requirements — Electronic switches IEC 60669-2-1:2002 (Modified) + IS1:2011 + IS2:2012 |
EN 60669-2-1:2000 + A2:2001 Note 2.1 |
Date expired (1.7.2009) |
|
|
EN 60669-2-1:2004/A1:2009 IEC 60669-2-1:2002/A1:2008 (Modified) |
Note 3 |
Date expired (1.4.2012) |
|
|
EN 60669-2-1:2004/A12:2010 |
Note 3 |
Date expired (1.6.2013) |
|
|
EN 60669-2-1:2004/AC:2007 |
|
|
|
Cenelec |
EN 60669-2-2:2006 Switches for household and similar fixed electrical installations — Part 2-2: Particular requirements — Electromagnetic remote-control switches (RCS) IEC 60669-2-2:2006 |
EN 60669-2-2:1997 + A1:1997 Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 60669-2-3:2006 Switches for household and similar fixed electrical installations — Part 2-3: Particular requirements — Time delay switches (TDS) IEC 60669-2-3:2006 |
EN 60669-2-3:1997 Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 60669-2-4:2005 Switches for household and similar fixed electrical installations — Part 2-4: Particular requirements — Isolating switches IEC 60669-2-4:2004 (Modified) |
|
|
|
Cenelec |
EN 60669-2-6:2012 Switches for household and similar fixed electrical installations — Part 2-6: Particular requirements — Fireman's switches for exterior and interior signs and luminaires IEC 60669-2-6:2012 (Modified) |
EN 50425:2008 Note 2.1 |
22.2.2015 |
|
Cenelec |
EN 60670-1:2005 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 1: General requirements IEC 60670-1:2002 (Modified) |
|
|
|
|
EN 60670-1:2005/A1:2013 IEC 60670-1:2002/A1:2011 (Modified) |
Note 3 |
31.12.2017 |
|
|
EN 60670-1:2005/AC:2007 |
|
|
|
|
EN 60670-1:2005/AC:2010 |
|
|
|
Cenelec |
EN 60670-21:2007 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 21: Particular requirements for boxes and enclosures with provision for suspension means IEC 60670-21:2004 (Modified) |
|
|
|
Cenelec |
EN 60670-22:2006 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 22: Particular requirements for connecting boxes and enclosures IEC 60670-22:2003 (Modified) |
|
|
|
Cenelec |
EN 60670-23:2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 23: Particular requirements for floor boxes and enclosures IEC 60670-23:2006 (Modified) |
|
|
|
Cenelec |
EN 60670-24:2013 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment IEC 60670-24:2011 (Modified) |
|
|
|
Cenelec |
EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals IEC 60688:2012 |
|
|
|
Cenelec |
EN 60691:2003 Thermal-links — Requirements and application guide IEC 60691:2002 |
EN 60691:1995 + A2:2000 Note 2.1 |
Date expired (1.12.2005) |
|
|
EN 60691:2003/A1:2007 IEC 60691:2002/A1:2006 |
Note 3 |
Date expired (1.12.2009) |
|
|
EN 60691:2003/A2:2010 IEC 60691:2002/A2:2010 |
Note 3 |
Date expired (1.3.2013) |
|
Cenelec |
EN 60695-2-10:2001 Fire hazard testing — Part 2-10: Glowing/hot-wire based test methods — Glow-wire apparatus and common test procedure IEC 60695-2-10:2000 |
EN 60695-2-1/0:1996 Note 2.1 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60695-2-10:2013 Fire hazard testing — Part 2-10: Glowing/hot-wire based test methods — Glow-wire apparatus and common test procedure IEC 60695-2-10:2013 |
EN 60695-2-10:2001 Note 2.1 |
14.5.2016 |
|
Cenelec |
EN 60695-2-11:2001 Fire hazard testing — Part 2-11: Glowing/hot-wire based test methods — Glow-wire flammability test method for end-products IEC 60695-2-11:2000 |
EN 60695-2-1/1:1996 Note 2.1 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60695-10-2:2003 Fire hazard testing — Part 10-2: Abnormal heat — Ball pressure test IEC 60695-10-2:2003 |
|
|
|
Cenelec |
EN 60695-10-3:2002 Fire hazard testing — Part 10-3: Abnormal heat — Mould stress relief distortion test IEC 60695-10-3:2002 |
|
|
|
Cenelec |
EN 60695-11-2:2003 Fire hazard testing — Part 11-2: Test flames — 1 kW nominal pre-mixed flame — Apparatus, confirmatory test arrangement and guidance IEC 60695-11-2:2003 |
EN 60695-2-4/1:1993 + A1:1996 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 60695-11-3:2012 Fire hazard testing — Part 11-3: Test flames — 500 W flames — Apparatus and confirmational test methods IEC 60695-11-3:2012 |
|
|
|
Cenelec |
EN 60695-11-4:2011 Fire hazard testing — Part 11-4: Test flames — 50 W flame — Apparatus and confirmational test method IEC 60695-11-4:2011 |
|
|
|
Cenelec |
EN 60695-11-5:2005 Fire hazard testing — Part 11-5: Test flames — Needle-flame test method — Apparatus, confirmatory test arrangement and guidance IEC 60695-11-5:2004 |
EN 60695-2-2:1994 + A1:1995 Note 2.1 |
Date expired (1.2.2008) |
|
Cenelec |
EN 60695-11-10:1999 Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods IEC 60695-11-10:1999 |
|
|
|
|
EN 60695-11-10:1999/A1:2003 IEC 60695-11-10:1999/A1:2003 |
Note 3 |
Date expired (1.9.2006) |
|
Cenelec |
EN 60695-11-10:2013 Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods IEC 60695-11-10:2013 |
EN 60695-11-10:1999 and its amendment Note 2.1 |
25.6.2016 |
|
Cenelec |
EN 60695-11-20:1999 Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods IEC 60695-11-20:1999 |
|
|
|
|
EN 60695-11-20:1999/A1:2003 IEC 60695-11-20:1999/A1:2003 |
Note 3 |
Date expired (1.9.2006) |
|
Cenelec |
EN 60702-1:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V — Part 1: Cables IEC 60702-1:2002 |
HD 586.1 S1:1994 Note 2.1 |
Date expired (1.3.2005) |
|
Cenelec |
EN 60702-2:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V — Part 2: Terminations IEC 60702-2:2002 |
HD 586.2 S1:1994 Note 2.1 |
Date expired (1.3.2005) |
|
Cenelec |
EN 60715:2001 Dimensions of low-voltage switchgear and controlgear — Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations IEC 60715:1981 + A1:1995 |
|
|
|
Cenelec |
EN 60719:1993 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V IEC 60719:1992 |
|
|
|
Cenelec |
EN 60728-11:2010 Cable networks for television signals, sound signals and interactive services — Part 11: Safety IEC 60728-11:2010 |
EN 60728-11:2005 Note 2.1 |
Date expired (1.10.2013) |
|
Cenelec |
EN 60730-1:1995 Automatic electrical controls for household and similar use — Part 1: General requirements IEC 60730-1:1993 (Modified) |
EN 60730-1:1991 + A1:1991 + A11:1991 + A12:1993 + A14:1995 |
Date expired (1.7.1995) |
|
|
EN 60730-1:1995/A11:1996 |
Note 3 |
Date expired (1.1.1998) |
|
|
EN 60730-1:1995/A12:1996 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60730-1:1995/A1:1997 IEC 60730-1:1993/A1:1994 (Modified) |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60730-1:1995/A2:1998 IEC 60730-1:1993/A2:1997 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60730-1:1995/A14:1998 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60730-1:1995/A15:1998 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60730-1:1995/A16:1999 |
Note 3 |
Date expired (1.10.2000) |
|
|
EN 60730-1:1995/A17:2000 |
Note 3 |
Date expired (1.10.2002) |
|
|
EN 60730-1:1995/A18:2003 |
Note 3 |
Date expired (1.6.2010) |
|
|
EN 60730-1:1995/AC:2007 |
|
|
|
Cenelec |
EN 60730-1:2000 Automatic electrical controls for household and similar use — Part 1: General requirements IEC 60730-1:1999 (Modified) |
EN 60730-1:1995 and its amendments Note 2.1 |
Date expired (1.7.1995) |
|
|
EN 60730-1:2000/A12:2003 |
Note 3 |
Date expired (1.6.2010) |
|
|
EN 60730-1:2000/A1:2004 IEC 60730-1:1999/A1:2003 (Modified) |
Note 3 |
Date expired (1.6.2010) |
|
|
EN 60730-1:2000/A13:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60730-1:2000/A14:2005 |
Note 3 |
Date expired (1.6.2010) |
|
|
EN 60730-1:2000/A2:2008 IEC 60730-1:1999/A2:2007 (Modified) |
Note 3 |
Date expired (1.6.2011) |
|
|
EN 60730-1:2000/AC:2007 |
|
|
|
Cenelec |
EN 60730-1:2011 Automatic electrical controls for household and similar use — Part 1: General requirements IEC 60730-1:2010 (Modified) |
EN 60730-1:2000 and its amendments Note 2.1 |
Date expired (1.10.2013) |
|
Cenelec |
EN 60730-2-2:2002 Automatic electrical controls for household and similar use — Part 2-2: Particular requirements for thermal motor protectors IEC 60730-2-2:2001 (Modified) |
EN 60730-2-2:1991 + A1:1997 + A2:1997 + A11:1995 Note 2.1 |
Date expired (1.3.2009) |
|
|
EN 60730-2-2:2002/A11:2005 |
Note 3 |
Date expired (1.3.2009) |
|
|
EN 60730-2-2:2002/A1:2006 IEC 60730-2-2:2001/A1:2005 (Modified) |
Note 3 |
Date expired (1.3.2009) |
|
Cenelec |
EN 60730-2-3:2007 Automatic electrical controls for household and similar use — Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps IEC 60730-2-3:2006 (Modified) |
EN 60730-2-3:1992 + A1:1998 + A2:2001 + A11:2005 Note 2.1 |
Date expired (1.9.2010) |
|
Cenelec |
EN 60730-2-4:2007 Automatic electrical controls for household and similar use — Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type IEC 60730-2-4:2006 (Modified) |
EN 60730-2-4:1993 + A1:1998 + A2:2002 Note 2.1 |
Date expired (1.9.2010) |
|
Cenelec |
EN 60730-2-5:2002 Automatic electrical controls for household and similar use — Part 2-5: Particular requirements for automatic electrical burner control systems IEC 60730-2-5:2000 (Modified) |
EN 60730-2-5:1995 + A1:1996 + A2:1998 Note 2.1 |
Date expired (1.12.2008) |
|
|
EN 60730-2-5:2002/A1:2004 IEC 60730-2-5:2000/A1:2004 (Modified) |
Note 3 |
Date expired (1.12.2008) |
|
|
EN 60730-2-5:2002/A11:2005 |
Note 3 |
Date expired (1.12.2008) |
|
|
EN 60730-2-5:2002/A2:2010 IEC 60730-2-5:2000/A2:2008 (Modified) |
Note 3 |
Date expired (1.3.2013) |
|
Cenelec |
EN 60730-2-6:2008 Automatic electrical controls for household and similar use — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements IEC 60730-2-6:2007 (Modified) |
EN 60730-2-6:1995 + A1:1997 + A2:1998 |
Date expired (1.7.2011) |
|
Cenelec |
EN 60730-2-7:2010 Automatic electrical controls for household and similar use — Part 2-7: Particular requirements for timers and time switches IEC 60730-2-7:2008 (Modified) |
EN 60730-2-7:1991 + A1:1997 + A11:1994 + A12:1993 + A13:2003 + A14:2003 |
Date expired (1.10.2013) |
|
|
EN 60730-2-7:2010/AC:2011 |
|
|
|
Cenelec |
EN 60730-2-8:2002 Automatic electrical controls for household and similar use — Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements IEC 60730-2-8:2000 (Modified) |
EN 60730-2-8:1995 + A1:1997 + A2:1997 Note 2.1 |
Date expired (1.12.2008) |
|
|
EN 60730-2-8:2002/A1:2003 IEC 60730-2-8:2000/A1:2002 (Modified) |
Note 3 |
Date expired (1.12.2008) |
|
Cenelec |
EN 60730-2-9:2010 Automatic electrical controls for household and similar use — Part 2-9: Particular requirements for temperature sensing controls IEC 60730-2-9:2008 (Modified) |
EN 60730-2-9:2002 + A1:2003 + A2:2005 + A11:2003 + A12:2004 |
Date expired (1.11.2013) |
|
Cenelec |
EN 60730-2-10:2007 Automatic electrical controls for household and similar use — Part 2-10: Particular requirements for motor-starting relays IEC 60730-2-10:2006 |
EN 60730-2-10:1995 + A1:1996 + A2:2002 Note 2.1 |
Date expired (1.9.2010) |
|
Cenelec |
EN 60730-2-11:2008 Automatic electrical controls for household and similar use — Part 2-11: Particular requirements for energy regulators IEC 60730-2-11:2006 |
EN 60730-2-11:1993 + A1:1997 + A2:1998 + A11:2005 Note 2.1 |
Date expired (1.10.2010) |
|
Cenelec |
EN 60730-2-12:2006 Automatic electrical controls for household and similar use — Part 2-12: Particular requirements for electrically operated door locks IEC 60730-2-12:2005 (Modified) |
EN 60730-2-12:1993 + A1:1997 + A11:2005 Note 2.1 |
Date expired (1.10.2008) |
|
|
EN 60730-2-12:2006/A11:2008 |
Note 3 |
Date expired (1.4.2011) |
|
Cenelec |
EN 60730-2-13:2008 Automatic electrical controls for household and similar use — Part 2-13: Particular requirements for humidity sensing controls IEC 60730-2-13:2006 (Modified) |
EN 60730-2-13:1998 + A1:1998 + A2:2002 + A11:2005 Note 2.1 |
Date expired (1.10.2010) |
|
Cenelec |
EN 60730-2-14:1997 Automatic electrical controls for household and similar use — Part 2-14: Particular requirements for electric actuators IEC 60730-2-14:1995 (Modified) |
|
|
|
|
EN 60730-2-14:1997/A1:2001 IEC 60730-2-14:1995/A1:2001 |
Note 3 |
Date expired (1.7.2008) |
|
|
EN 60730-2-14:1997/A11:2005 |
Note 3 |
Date expired (1.7.2008) |
|
|
EN 60730-2-14:1997/A2:2008 IEC 60730-2-14:1995/A2:2007 (Modified) |
Note 3 |
Date expired (1.8.2011) |
|
Cenelec |
EN 60730-2-15:2010 Automatic electrical controls for household and similar use — Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls IEC 60730-2-15:2008 (Modified) |
EN 60730-2-15:1995 + A1:1998 + A11:2005 + EN 60730-2-16:1997 + A1:1998 + A2:2001 + A11:2005 + EN 60730-2-18:1999 + A11:2005 |
Date expired (1.3.2013) |
|
Cenelec |
EN 60730-2-19:2002 Automatic electrical controls for household and similar use — Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements IEC 60730-2-19:1997 (Modified) + A1:2000 (Modified) |
|
|
|
|
EN 60730-2-19:2002/A11:2005 |
Note 3 |
Date expired (1.10.2008) |
|
|
EN 60730-2-19:2002/A2:2008 IEC 60730-2-19:1997/A2:2007 |
Note 3 |
Date expired (1.2.2011) |
|
Cenelec |
EN 60799:1998 Electrical accessories — Cord sets and interconnection cord sets IEC 60799:1998 |
EN 60799:1987 + A1:1994 Note 2.1 |
Date expired (1.7.2001) |
|
Cenelec |
EN 60811-1-1:1995 Insulating and sheathing materials of electric and optical cables — Common test methods — Part 1-1: General application — Measurement of thickness and overall dimensions — Tests for determining the mechanical properties IEC 60811-1-1:1993 |
HD 505.1.1 S3:1991 Note 2.1 |
Date expired (1.12.1996) |
|
|
EN 60811-1-1:1995/A1:2001 IEC 60811-1-1:1993/A1:2001 |
Note 3 |
Date expired (1.5.2004) |
|
Cenelec |
EN 60811-1-2:1995 Insulating and sheathing materials of electric cables — Common test methods — Part 1-2: General application — Thermal ageing methods IEC 60811-1-2:1985 + A1:1989 |
HD 505.1.2 S2:1991 Note 2.1 |
Date expired (1.12.1996) |
|
|
EN 60811-1-2:1995/A2:2000 IEC 60811-1-2:1985/A2:2000 |
Note 3 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60811-1-3:1995 Insulating and sheathing materials of electric and optical cables — Common test methods — Part 1-3: General application — Methods for determining the density — Water absorption tests — Shrinkage test IEC 60811-1-3:1993 |
HD 505.1.3 S2:1991 Note 2.1 |
Date expired (1.12.1996) |
|
|
EN 60811-1-3:1995/A1:2001 IEC 60811-1-3:1993/A1:2001 |
Note 3 |
Date expired (1.7.2004) |
|
Cenelec |
EN 60811-1-4:1995 Insulating and sheathing materials of electric and optical cables — Common test methods — Part 1-4: General application — Tests at low temperature IEC 60811-1-4:1985 + A1:1993 |
HD 505.1.4 S1:1988 Note 2.1 |
Date expired (1.12.1996) |
|
|
EN 60811-1-4:1995/A2:2001 IEC 60811-1-4:1985/A2:2001 |
Note 3 |
Date expired (1.9.2004) |
|
Cenelec |
EN 60811-2-1:1998 Insulating and sheathing materials of electric and optical cables — Common test methods — Part 2-1: Methods specific to elastomeric compounds — Ozone resistance, hot set and mineral oil immersion tests IEC 60811-2-1:1998 |
EN 60811-2-1:1995 Note 2.1 |
Date expired (1.5.2000) |
|
|
EN 60811-2-1:1998/A1:2001 IEC 60811-2-1:1998/A1:2001 |
Note 3 |
Date expired (1.9.2004) |
|
Cenelec |
EN 60811-3-1:1995 Insulating and sheathing materials of electric and optical cables — Common test methods — Part 3-1: Methods specific to PVC compounds — Pressure test at high temperature — Tests for resistance to cracking IEC 60811-3-1:1985 |
HD 505.3.1 S1:1988 Note 2.1 |
Date expired (1.5.2000) |
|
|
EN 60811-3-1:1995/A1:1996 IEC 60811-3-1:1985/A1:1994 |
Note 3 |
Date expired (1.6.1997) |
|
|
EN 60811-3-1:1995/A2:2001 IEC 60811-3-1:1985/A2:2001 |
Note 3 |
Date expired (1.7.2004) |
|
Cenelec |
EN 60811-3-2:1995 Insulating and sheathing materials of electric and optical cables — Common test methods — Part 3-2: Methods specific to PVC compounds — Loss of mass test — Thermal stability test IEC 60811-3-2:1985 + A1:1993 |
HD 505.3.2 S1:1988 Note 2.1 |
Date expired (1.12.1996) |
|
|
EN 60811-3-2:1995/A2:2004 IEC 60811-3-2:1985/A2:2003 |
Note 3 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60811-4-1:2004 Insulating and sheathing materials of electric and optical cables — Common test methods — Part 4-1: Methods specific to polyethylene and polypropylene compounds — Resistance to environmental stress cracking — Measurement of the melt flow index — Carbon black and/or mineral filler content measurement in polyethylene by direct combustion — Measurement of carbon black content by thermogravimetric analysis (TGA) — Assessment of carbon black dispersion in polyethylene using a microscope IEC 60811-4-1:2004 |
EN 60811-4-1:1995 Note 2.1 |
Date expired (1.7.2007) |
|
Cenelec |
EN 60811-4-2:2004 Insulating and sheathing materials of electric and optical cables — Common test methods — Part 4-2: Methods specific to polyethylene and polypropylene compounds — Tensile strength and elongation at break after conditioning at elevated temperature — Wrapping test after conditioning at elevated temperature — Wrapping test after thermal ageing in air — Measurement of mass increase — Long-term stability test — Test method for copper-catalyzed oxidative degradation IEC 60811-4-2:2004 |
EN 60811-4-2:1999 Note 2.1 |
Date expired (1.7.2007) |
|
Cenelec |
EN 60811-5-1:1999 Insulating and sheathing materials of electric and optical cables — Common test methods — Part 5-1: Methods specific to filling compounds — Drop point — Separation of oil — Lower temperature brittleness — Total acid number — Absence of corrosive components — Permittivity at 23 oC — D.C. resistivity at 23 oC and 100 oC IEC 60811-5-1:1990 (Modified) |
HD 505.5.1 S1:1992 Note 2.1 |
Date expired (1.4.2001) |
|
|
EN 60811-5-1:1999/A1:2004 IEC 60811-5-1:1990/A1:2003 |
Note 3 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60811-100:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 100: General IEC 60811-100:2012 |
EN 60811-1-1:1995 and its amendment + EN 60811-1-2:1995 and its amendment + EN 60811-1-3:1995 and its amendment + EN 60811-1-4:1995 and its amendment + EN 60811-2-1:1998 and its amendment + EN 60811-3-1:1995 and its amendments + EN 60811-3-2:1995 and its amendment + EN 60811-4-1:2004 + EN 60811-4-2:2004 + EN 60811-5-1:1999 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-201:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 201: General tests — Measurement of insulation thickness IEC 60811-201:2012 |
EN 60811-1-1:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-202:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 202: General tests — Measurement of thickness of non-metallic sheath IEC 60811-202:2012 |
EN 60811-1-1:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-203:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 203: General tests — Measurement of overall dimensions IEC 60811-203:2012 |
EN 60811-1-1:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-301:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 301: Electrical tests — Measurement of the permittivity at 23 oC of filling compounds IEC 60811-301:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-302:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 302: Electrical tests — Measurement of the d.c. resistivity at 23 oC and 100 oC of filling compounds IEC 60811-302:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-401:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 401: Miscellaneous tests — Thermal ageing methods — Ageing in an air oven IEC 60811-401:2012 |
EN 60811-1-2:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-402:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 402: Miscellaneous tests — Water absorption tests IEC 60811-402:2012 |
EN 60811-1-3:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-403:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 403: Miscellaneous tests — Ozone resistance test on cross-linked compounds IEC 60811-403:2012 |
EN 60811-2-1:1998 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-404:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 404: Miscellaneous tests — Mineral oil immersion tests for sheaths IEC 60811-404:2012 |
EN 60811-2-1:1998 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-405:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 405: Miscellaneous tests — Thermal stability test for PVC insulations and PVC sheaths IEC 60811-405:2012 |
EN 60811-3-2:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-406:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 406: Miscellaneous tests — Resistance to stress cracking of polyethylene and polypropylene compounds IEC 60811-406:2012 |
EN 60811-4-1:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-407:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 407: Miscellaneous tests — Measurement of mass increase of polyethylene and polypropylene compounds IEC 60811-407:2012 |
EN 60811-4-2:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-408:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 408: Miscellaneous tests — Long-term stability test of polyethylene and polypropylene compounds IEC 60811-408:2012 |
EN 60811-4-2:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-409:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 409: Miscellaneous tests — Loss of mass test for thermoplastic insulations and sheaths IEC 60811-409:2012 |
EN 60811-3-2:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-410:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 410: Miscellaneous tests — Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors IEC 60811-410:2012 |
EN 60811-4-2:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-411:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 411: Miscellaneous tests — Low-temperature brittleness of filling compounds IEC 60811-411:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-412:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 412: Miscellaneous tests — Thermal ageing methods — Ageing in an air bomb IEC 60811-412:2012 |
EN 60811-1-2:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-501:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 501: Mechanical tests — Tests for determining the mechanical properties of insulating and sheathing compounds IEC 60811-501:2012 |
EN 60811-1-1:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-502:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 502: Mechanical tests — Shrinkage test for insulations IEC 60811-502:2012 |
EN 60811-1-3:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-503:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 503: Mechanical tests — Shrinkage test for sheaths IEC 60811-503:2012 |
EN 60811-1-3:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-504:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 504: Mechanical tests — Bending tests at low temperature for insulation and sheaths IEC 60811-504:2012 |
EN 60811-1-4:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-505:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 505: Mechanical tests — Elongation at low temperature for insulations and sheaths IEC 60811-505:2012 |
EN 60811-1-4:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-506:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 506: Mechanical tests — Impact test at low temperature for insulations and sheaths IEC 60811-506:2012 |
EN 60811-1-4:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-507:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 507: Mechanical tests — Hot set test for cross-linked materials IEC 60811-507:2012 |
EN 60811-2-1:1998 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-508:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 508: Mechanical tests — Pressure test at high temperature for insulation and sheaths IEC 60811-508:2012 |
EN 60811-3-1:1995 and its amendments Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-509:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 509: Mechanical tests — Test for resistance of insulations and sheaths to cracking (heat shock test) IEC 60811-509:2012 |
EN 60811-3-1:1995 and its amendments Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-510:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 510: Mechanical tests — Methods specific to polyethylene and polypropylene compounds — Wrapping test after thermal ageing in air IEC 60811-510:2012 |
EN 60811-4-2:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-511:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 511: Mechanical tests — Measurement of the melt flow index of polyethylene compounds IEC 60811-511:2012 |
EN 60811-4-1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-512:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 512: Mechanical tests — Methods specific to polyethylene and polypropylene compounds — Tensile strength and elongation at break after conditioning at elevated temperature IEC 60811-512:2012 |
EN 60811-4-2:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-513:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 513: Mechanical tests — Methods specific to polyethylene and polypropylene compounds — Wrapping test after conditioning IEC 60811-513:2012 |
EN 60811-4-2:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-601:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 601: Physical tests — Measurement of the drop point of filling compounds IEC 60811-601:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-602:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 602: Physical tests — Separation of oil in filling compounds IEC 60811-602:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-603:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 603: Physical tests — Measurement of total acid number of filling compounds IEC 60811-603:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-604:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 604: Physical tests — Measurement of absence of corrosive components in filling compounds IEC 60811-604:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-605:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 605: Physical tests — Measurement of carbon black and/or mineral filler in polyethylene compounds IEC 60811-605:2012 |
EN 60811-4-1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-606:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 606: Physical tests — Methods for determining the density IEC 60811-606:2012 |
EN 60811-1-3:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-607:2012 Electric and optical fibre cables — Test methods for non-metallic materials — Part 607: Physical tests — Test for the assessment of carbon black dispersion in polyethylene and polypropylene IEC 60811-607:2012 |
EN 60811-4-1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60825-1:2007 Safety of laser products — Part 1: Equipment classification and requirements IEC 60825-1:2007 |
EN 60825-1:1994 + A1:2002 + A2:2001 |
Date expired (1.9.2010) |
|
Cenelec |
EN 60825-2:2004 Safety of laser products — Part 2: Safety of optical fibre communication systems (OFCS) IEC 60825-2:2004 |
EN 60825-2:2000 Note 2.1 |
Date expired (1.9.2007) |
|
|
EN 60825-2:2004/A1:2007 IEC 60825-2:2004/A1:2006 |
Note 3 |
Date expired (1.2.2010) |
|
|
EN 60825-2:2004/A2:2010 IEC 60825-2:2004/A2:2010 |
Note 3 |
Date expired (1.10.2013) |
|
Cenelec |
EN 60825-4:2006 Safety of laser products — Part 4: Laser guards IEC 60825-4:2006 |
EN 60825-4:1997 + A1:2002 + A2:2003 Note 2.1 |
Date expired (1.10.2009) |
|
|
EN 60825-4:2006/A1:2008 IEC 60825-4:2006/A1:2008 |
Note 3 |
Date expired (1.9.2011) |
|
|
EN 60825-4:2006/A2:2011 IEC 60825-4:2006/A2:2011 |
Note 3 |
Date expired (3.5.2014) |
|
Cenelec |
EN 60825-12:2004 Safety of laser products — Part 12: Safety of free space optical communication systems used for transmission of information IEC 60825-12:2004 |
|
|
|
Cenelec |
EN 60831-1:1996 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 1: General — Performance, testing and rating — Safety requirements — Guide for installation and operation IEC 60831-1:1996 |
EN 60831-1:1993 Note 2.1 |
Date expired (1.8.1997) |
|
|
EN 60831-1:1996/A1:2003 IEC 60831-1:1996/A1:2002 |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60831-2:1996 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 2: Ageing test, self-healing test and destruction test IEC 60831-2:1995 |
EN 60831-2:1993 Note 2.1 |
Date expired (1.12.1996) |
|
Cenelec |
EN 60838-1:2004 Miscellaneous lampholders — Part 1: General requirements and tests IEC 60838-1:2004 |
EN 60838-1:1998 + A1:1999 + A2:2002 Note 2.1 |
Date expired (1.10.2007) |
|
|
EN 60838-1:2004/A1:2008 IEC 60838-1:2004/A1:2008 |
Note 3 |
Date expired (1.8.2011) |
|
|
EN 60838-1:2004/A2:2011 IEC 60838-1:2004/A2:2011 |
Note 3 |
Date expired (18.4.2014) |
|
Cenelec |
EN 60838-2-1:1996 Miscellaneous lampholders — Part 2: Particular requirements — Section 1: Lampholders S14 IEC 60838-2-1:1994 |
|
|
|
|
EN 60838-2-1:1996/A1:1998 IEC 60838-2-1:1994/A1:1998 |
Note 3 |
Date expired (1.8.2005) |
|
|
EN 60838-2-1:1996/A2:2004 IEC 60838-2-1:1994/A2:2004 |
Note 3 |
Date expired (1.10.2007) |
|
Cenelec |
EN 60838-2-2:2006 Miscellaneous lampholders — Part 2-2: Particular requirements — Connectors for LED-modules IEC 60838-2-2:2006 |
|
|
|
|
EN 60838-2-2:2006/A1:2012 IEC 60838-2-2:2006/A1:2012 |
Note 3 |
1.5.2015 |
|
Cenelec |
EN 60898-1:2003 Electrical accessories — Circuit breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for a.c. operation IEC 60898-1:2002 (Modified) |
EN 60898:1991 + A1:1991 + A11:1994 + A12:1995 + A13:1995 + A14:1995 + A15:1995 + A16:1996 + A17:1998 + A18:1998 + A19:2000 Note 2.1 |
Date expired (1.10.2008) |
|
|
EN 60898-1:2003/A1:2004 IEC 60898-1:2002/A1:2002 (Modified) |
Note 3 |
Date expired (1.10.2008) |
|
|
EN 60898-1:2003/A11:2005 |
Note 3 |
Date expired (1.5.2010) |
|
|
EN 60898-1:2003/A13:2012 |
Note 3 |
21.5.2015 |
|
|
EN 60898-1:2003/AC:2004 |
|
|
|
Cenelec |
EN 60898-2:2006 Electrical accessories — Circuit-breakers for overcurrent protection for household and similar installations — Part 2: Circuit-breakers for a.c. and d.c. operation IEC 60898-2:2000 (Modified) + A1:2003 (Modified) |
EN 60898-2:2001 Note 2.1 |
Date expired (1.6.2010) |
|
Cenelec |
EN 60931-1:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 1: General — Performance, testing and rating — Safety requirements — Guide for installation and operation IEC 60931-1:1996 |
EN 60931-1:1993 Note 2.1 |
Date expired (1.8.1997) |
|
|
EN 60931-1:1996/A1:2003 IEC 60931-1:1996/A1:2002 |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
EN 60931-2:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 2: Ageing test and destruction test IEC 60931-2:1995 |
EN 60931-2:1993 Note 2.1 |
Date expired (1.12.1996) |
|
Cenelec |
EN 60931-3:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV — Part 3: Internal fuses IEC 60931-3:1996 |
|
|
|
Cenelec |
EN 60934:2001 Circuit-breakers for equipment (CBE) IEC 60934:2000 |
EN 60934:1994 + A1:1994 + A2:1997 + A11:1998 Note 2.1 |
Date expired (1.11.2003) |
|
|
EN 60934:2001/A1:2007 IEC 60934:2000/A1:2007 |
Note 3 |
Date expired (1.2.2010) |
|
|
EN 60934:2001/A2:2013 IEC 60934:2000/A2:2013 |
Note 3 |
22.2.2016 |
|
Cenelec |
EN 60947-1:2007 Low-voltage switchgear and controlgear — Part 1: General rules IEC 60947-1:2007 |
EN 60947-1:2004 Note 2.1 |
Date expired (1.7.2010) |
|
|
EN 60947-1:2007/A1:2011 IEC 60947-1:2007/A1:2010 |
Note 3 |
Date expired (1.1.2014) |
|
Cenelec |
EN 60947-2:2006 Low-voltage switchgear and controlgear — Part 2: Circuit-breakers IEC 60947-2:2006 |
EN 60947-2:2003 Note 2.1 |
Date expired (1.7.2009) |
|
|
EN 60947-2:2006/A1:2009 IEC 60947-2:2006/A1:2009 |
Note 3 |
Date expired (1.7.2012) |
|
|
EN 60947-2:2006/A2:2013 IEC 60947-2:2006/A2:2013 |
Note 3 |
7.3.2016 |
|
Cenelec |
EN 60947-3:2009 Low-voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units IEC 60947-3:2008 |
EN 60947-3:1999 + A1:2001 + A2:2005 Note 2.1 |
Date expired (1.5.2012) |
|
|
EN 60947-3:2009/A1:2012 IEC 60947-3:2008/A1:2012 |
Note 3 |
21.3.2015 |
|
Cenelec |
EN 60947-4-1:2010 Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters — Electromechanical contactors and motor-starters IEC 60947-4-1:2009 |
EN 60947-4-1:2001 + A1:2002 + A2:2005 |
Date expired (1.4.2013) |
|
|
EN 60947-4-1:2010/A1:2012 IEC 60947-4-1:2009/A1:2012 |
Note 3 |
24.8.2015 |
|
Cenelec |
EN 60947-4-2:2000 Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters — AC semiconductor motor controllers and starters IEC 60947-4-2:1999 |
HD 419.2 S1:1987 + EN 60947-4-2:1996 + A1:1997 + A2:1998 Note 2.1 |
Date expired (1.12.2002) |
|
|
EN 60947-4-2:2000/A1:2002 IEC 60947-4-2:1999/A1:2001 |
Note 3 |
Date expired (1.3.2005) |
|
|
EN 60947-4-2:2000/A2:2006 IEC 60947-4-2:1999/A2:2006 |
Note 3 |
Date expired (1.12.2009) |
|
Cenelec |
EN 60947-4-2:2012 Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters — AC semiconductor motor controllers and starters IEC 60947-4-2:2011 |
EN 60947-4-2:2000 and its amendments Note 2.1 |
22.6.2014 |
|
Cenelec |
EN 60947-4-3:2000 Low-voltage switchgear and controlgear — Part 4-3: Contactors and motor-starters — AC semiconductor controllers and contactors for non-motor loads IEC 60947-4-3:1999 |
HD 419.2 S1:1987 Note 2.1 |
Date expired (1.12.2002) |
|
|
EN 60947-4-3:2000/A1:2006 IEC 60947-4-3:1999/A1:2006 |
Note 3 |
Date expired (1.11.2009) |
|
|
EN 60947-4-3:2000/A2:2011 IEC 60947-4-3:1999/A2:2011 |
Note 3 |
Date expired (18.4.2014) |
|
Cenelec |
EN 60947-5-1:2004 Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices IEC 60947-5-1:2003 |
EN 60947-5-1:1997 + A1:1999 + A2:2000 + A12:1999 Note 2.1 |
Date expired (1.5.2007) |
|
|
EN 60947-5-1:2004/A1:2009 IEC 60947-5-1:2003/A1:2009 |
Note 3 |
Date expired (1.5.2012) |
|
|
EN 60947-5-1:2004/AC:2005 |
|
|
|
Cenelec |
EN 60947-5-2:2007 Low-voltage switchgear and controlgear — Part 5-2: Control circuit devices and switching elements — Proximity switches IEC 60947-5-2:2007 |
EN 60947-5-2:1998 + A1:1999 + A2:2004 Note 2.1 |
Date expired (1.11.2010) |
|
|
EN 60947-5-2:2007/A1:2012 IEC 60947-5-2:2007/A1:2012 |
Note 3 |
1.11.2015 |
|
Cenelec |
EN 60947-5-3:1999 Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions (PDF) IEC 60947-5-3:1999 |
|
|
|
|
EN 60947-5-3:1999/A1:2005 IEC 60947-5-3:1999/A1:2005 |
Note 3 |
Date expired (1.3.2008) |
|
Cenelec |
EN 60947-5-4:2003 Low-voltage switchgear and controlgear — Part 5-4: Control circuit devices and switching elements — Method of assessing the performance of low-energy contacts — Special tests IEC 60947-5-4:2002 |
EN 60947-5-4:1997 Note 2.1 |
Date expired (1.12.2006) |
|
Cenelec |
EN 60947-5-5:1997 Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function IEC 60947-5-5:1997 |
|
|
|
|
EN 60947-5-5:1997/A1:2005 IEC 60947-5-5:1997/A1:2005 |
Note 3 |
Date expired (1.3.2008) |
|
|
EN 60947-5-5:1997/A11:2013 |
Note 3 |
3.12.2015 |
|
Cenelec |
EN 60947-5-7:2003 Low-voltage switchgear and controlgear — Part 5-7: Control circuit devices and switching elements — Requirements for proximity devices with analogue output IEC 60947-5-7:2003 |
EN 50319:1999 Note 2.1 |
Date expired (1.9.2006) |
|
Cenelec |
EN 60947-5-8:2006 Low-voltage switchgear and controlgear — Part 5-8: Control circuit devices and switching elements — Three-position enabling switches IEC 60947-5-8:2006 |
|
|
|
Cenelec |
EN 60947-5-9:2007 Low-voltage switchgear and controlgear — Part 5-9: Control circuit devices and switching elements — Flow rate switches IEC 60947-5-9:2006 |
|
|
|
Cenelec |
EN 60947-6-1:2005 Low-voltage switchgear and controlgear — Part 6-1: Multiple function equipment — Transfer switching equipment IEC 60947-6-1:2005 |
EN 60947-6-1:1991 + A1:1994 + A2:1997 Note 2.1 |
Date expired (1.10.2008) |
|
Cenelec |
EN 60947-6-2:2003 Low-voltage switchgear and controlgear — Part 6-2: Multiple function equipment — Control and protective switching devices (or equipment) (CPS) IEC 60947-6-2:2002 |
EN 60947-6-2:1993 + A1:1997 + A2:1999 Note 2.1 |
Date expired (1.9.2005) |
|
|
EN 60947-6-2:2003/A1:2007 IEC 60947-6-2:2002/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
Cenelec |
EN 60947-7-1:2009 Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment — Terminal blocks for copper conductors IEC 60947-7-1:2009 |
EN 60947-7-1:2002 Note 2.1 |
Date expired (1.6.2012) |
|
Cenelec |
EN 60947-7-2:2009 Low-voltage switchgear and controlgear — Part 7-2: Ancillary equipment — Protective conductor terminal blocks for copper conductors IEC 60947-7-2:2009 |
EN 60947-7-2:2002 Note 2.1 |
Date expired (1.6.2012) |
|
Cenelec |
EN 60947-7-3:2009 Low-voltage switchgear and controlgear — Part 7-3: Ancillary equipment — Safety requirements for fuse terminal blocks IEC 60947-7-3:2009 |
EN 60947-7-3:2002 Note 2.1 |
Date expired (1.9.2012) |
|
Cenelec |
EN 60947-8:2003 Low-voltage switchgear and controlgear — Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines IEC 60947-8:2003 |
|
|
|
|
EN 60947-8:2003/A1:2006 IEC 60947-8:2003/A1:2006 |
Note 3 |
Date expired (1.10.2009) |
|
|
EN 60947-8:2003/A2:2012 IEC 60947-8:2003/A2:2011 |
Note 3 |
22.6.2014 |
|
Cenelec |
EN 60950-1:2006 Information technology equipment — Safety — Part 1: General requirements IEC 60950-1:2005 (Modified) |
EN 60950-1:2001 + A11:2004 Note 2.1 |
Date expired (1.12.2010) |
|
|
EN 60950-1:2006/A11:2009 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 60950-1:2006/A1:2010 IEC 60950-1:2005/A1:2009 (Modified) |
Note 3 |
Date expired (1.3.2013) |
|
|
EN 60950-1:2006/A12:2011 |
Note 3 |
Date expired (24.1.2013) |
|
|
EN 60950-1:2006/A2:2013 IEC 60950-1:2005/A2:2013 (Modified) |
Note 3 |
2.7.2016 |
|
|
EN 60950-1:2006/AC:2011 |
|
|
|
Cenelec |
EN 60950-21:2003 Information technology equipment — Safety — Part 21: Remote power feeding IEC 60950-21:2002 |
|
|
|
Cenelec |
EN 60950-22:2006 Information technology equipment — Safety — Part 22: Equipment installed outdoors IEC 60950-22:2005 (Modified) |
|
|
|
|
EN 60950-22:2006/AC:2008 |
|
|
|
Cenelec |
EN 60950-23:2006 Information technology equipment — Safety — Part 23: Large data storage equipment IEC 60950-23:2005 |
|
|
|
|
EN 60950-23:2006/AC:2008 |
|
|
|
Cenelec |
EN 60968:1990 Self-ballasted lamps for general lighting services — Safety requirements IEC 60968:1988 (Modified) |
|
|
|
|
EN 60968:1990/A1:1993 IEC 60968:1988/A1:1991 |
Note 3 |
Date expired (1.12.1993) |
|
|
EN 60968:1990/A2:1999 IEC 60968:1988/A2:1999 |
Note 3 |
Date expired (1.10.2002) |
|
Cenelec |
EN 60968:2013 Self-ballasted lamps for general lighting services — Safety requirements IEC 60968:2012 |
EN 60968:1990 and its amendments Note 2.1 |
31.10.2015 |
|
Cenelec |
EN 60974-1:2005 Arc welding equipment — Part 1: Welding power sources IEC 60974-1:2005 |
EN 60974-1:1998 + A1:2000 + A2:2003 Note 2.1 |
Date expired (1.10.2008) |
|
Cenelec |
EN 60974-1:2012 Arc welding equipment — Part 1: Welding power sources IEC 60974-1:2012 |
EN 60974-1:2005 Note 2.1 |
17.7.2015 |
|
Cenelec |
EN 60974-2:2008 Arc welding equipment — Part 2: Liquid cooling systems IEC 60974-2:2007 |
EN 60974-2:2003 Note 2.1 |
Date expired (1.2.2011) |
|
Cenelec |
EN 60974-2:2013 Arc welding equipment — Part 2: Liquid cooling systems IEC 60974-2:2013 |
EN 60974-2:2008 Note 2.1 |
28.2.2016 |
|
Cenelec |
EN 60974-3:2007 Arc welding equipment — Part 3: Arc striking and stabilizing devices IEC 60974-3:2007 |
EN 60974-3:2003 Note 2.1 |
Date expired (1.12.2010) |
|
Cenelec |
EN 60974-5:2008 Arc welding equipment — Part 5: Wire feeders IEC 60974-5:2007 |
EN 60974-5:2002 Note 2.1 |
Date expired (1.2.2011) |
|
Cenelec |
EN 60974-5:2013 Arc welding equipment — Part 5: Wire feeders IEC 60974-5:2013 |
EN 60974-5:2008 Note 2.1 |
27.6.2016 |
|
Cenelec |
EN 60974-6:2003 Arc welding equipment — Part 6: Limited duty manual metal arc welding power sources IEC 60974-6:2003 |
EN 50060:1989 + A1:1994 Note 2.1 |
Date expired (1.3.2006) |
|
|
EN 60974-6:2003/AC:2005 |
|
|
|
Cenelec |
EN 60974-6:2011 Arc welding equipment — Part 6: Limited duty equipment IEC 60974-6:2010 |
EN 60974-6:2003 Note 2.1 |
Date expired (1.1.2014) |
|
Cenelec |
EN 60974-7:2005 Arc welding equipment — Part 7:Torches IEC 60974-7:2005 |
EN 60974-7:2000 Note 2.1 |
Date expired (1.8.2008) |
|
Cenelec |
EN 60974-7:2013 Arc welding equipment — Part 7:Torches IEC 60974-7:2013 |
EN 60974-7:2005 Note 2.1 |
28.2.2016 |
|
Cenelec |
EN 60974-8:2009 Arc welding equipment — Part 8: Gas consoles for welding and plasma cutting systems IEC 60974-8:2009 |
EN 60974-8:2004 Note 2.1 |
Date expired (1.3.2012) |
|
Cenelec |
EN 60974-11:2010 Arc welding equipment — Part 11: Electrode holders IEC 60974-11:2010 |
EN 60974-11:2004 Note 2.1 |
Date expired (1.10.2013) |
|
Cenelec |
EN 60974-12:2005 Arc welding equipment — Part 12: Coupling devices for welding cables IEC 60974-12:2005 |
EN 60974-12:1995 Note 2.1 |
Date expired (1.7.2008) |
|
Cenelec |
EN 60974-12:2011 Arc welding equipment — Part 12: Coupling devices for welding cables IEC 60974-12:2011 |
EN 60974-12:2005 Note 2.1 |
22.6.2014 |
|
Cenelec |
EN 60974-13:2011 Arc welding equipment — Part 13: Welding clamp IEC 60974-13:2011 |
|
|
|
Cenelec |
EN 60998-1:2004 Connecting devices for low-voltage circuits for household and similar purposes — Part 1: General requirements IEC 60998-1:2002 (Modified) |
EN 60998-1:1993 + A1:2001 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-1:2004 Connecting devices for low-voltage circuits for household and similar purposes — Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units IEC 60998-2-1:2002 (Modified) |
EN 60998-2-1:1993 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-2:2004 Connecting devices for low-voltage circuits for household and similar purposes — Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units IEC 60998-2-2:2002 (Modified) |
EN 60998-2-2:1993 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-3:2004 Connecting devices for low-voltage circuits for household and similar purposes — Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units IEC 60998-2-3:2002 (Modified) |
EN 60998-2-3:1993 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-4:2005 Connecting devices for low voltage circuits for household and similar purposes — Part 2-4: Particular requirements for twist-on connecting devices IEC 60998-2-4:2004 (Modified) |
EN 60998-2-4:1993 Note 2.1 |
Date expired (1.3.2008) |
|
Cenelec |
EN 60999-1:2000 Connecting devices — Electrical copper conductors — Safety requirements for screw-type and screwless-type clamping units — Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) IEC 60999-1:1999 |
EN 60999-1:1993 Note 2.1 |
Date expired (1.1.2003) |
|
Cenelec |
EN 60999-2:2003 Connecting devices — Electrical copper conductors — Safety requirements for screw-type and screwless-type clamping units — Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) IEC 60999-2:2003 |
|
|
|
Cenelec |
EN 61008-1:2004 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) — Part 1: General rules IEC 61008-1:1996 (Modified) + A1:2002 (Modified) |
EN 61008-1:1994 + A2:1995 + A11:1995 + A12:1998 + A13:1998 + A14:1998 + A17:2000 Note 2.1 |
Date expired (1.4.2009) |
|
|
EN 61008-1:2004/A11:2007 |
Note 3 |
Date expired (1.4.2009) |
|
|
EN 61008-1:2004/A12:2009 |
Note 3 |
Date expired (1.12.2011) |
|
Cenelec |
EN 61008-1:2012 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) — Part 1: General rules IEC 61008-1:2010 (Modified) |
EN 61008-1:2004 and its amendments Note 2.1 |
18.6.2017 |
|
Cenelec |
EN 61008-2-1:1994 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) — Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage IEC 61008-2-1:1990 |
|
|
|
|
EN 61008-2-1:1994/A11:1998 |
Note 3 |
Date expired (1.4.2001) |
|
|
EN 61008-2-1:1994/A11:1998/AC:1999 |
|
|
|
Cenelec |
EN 61009-1:2004 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) — Part 1: General rules IEC 61009-1:1996 (Modified) + A1:2002 (Modified) |
EN 61009-1:1994 + A1:1995 + A2:1998 + A11:1995 + A13:1998 + A14:1998 + A15:1998 + A19:2000 Note 2.1 |
Date expired (1.4.2009) |
|
|
EN 61009-1:2004/A11:2008 |
Note 3 |
Date expired (1.4.2009) |
|
|
EN 61009-1:2004/A12:2009 |
Note 3 |
Date expired (1.12.2011) |
|
|
EN 61009-1:2004/A13:2009 |
Note 3 |
Date expired (1.12.2011) |
|
|
EN 61009-1:2004/AC:2006 |
|
|
|
Cenelec |
EN 61009-1:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) — Part 1: General rules IEC 61009-1:2010 (Modified) |
EN 61009-1:2004 and its amendments Note 2.1 |
18.6.2017 |
|
Cenelec |
EN 61009-2-1:1994 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) — Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage IEC 61009-2-1:1991 |
|
|
|
|
EN 61009-2-1:1994/A11:1998 |
Note 3 |
Date expired (1.4.2001) |
|
|
EN 61009-2-1:1994/A11:1998/AC:1999 |
|
|
|
Cenelec |
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements IEC 61010-1:2010 |
EN 61010-1:2001 Note 2.1 |
Date expired (1.10.2013) |
|
Cenelec |
EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of material IEC 61010-2-010:2003 |
EN 61010-2-010:1994 + A1:1996 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-020: Particular requirements for laboratory centrifuges IEC 61010-2-020:2006 |
EN 61010-2-020:1994 + A1:1996 Note 2.1 |
Date expired (1.7.2009) |
|
Cenelec |
EN 61010-2-030:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-030: Particular requirements for testing and measuring circuits IEC 61010-2-030:2010 |
|
|
|
Cenelec |
EN 61010-2-032:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement IEC 61010-2-032:2002 |
EN 61010-2-032:1995 Note 2.1 |
Date expired (1.11.2005) |
|
Cenelec |
EN 61010-2-032:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement IEC 61010-2-032:2012 |
EN 61010-2-032:2002 Note 2.1 |
31.10.2015 |
|
Cenelec |
EN 61010-2-033:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage IEC 61010-2-033:2012 |
|
|
|
Cenelec |
EN 61010-2-040:2005 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials IEC 61010-2-040:2005 |
EN 61010-2-041:1996 + EN 61010-2-042:1997 + EN 61010-2-043:1997 + EN 61010-2-045:2000 Note 2.1 |
Date expired (1.6.2008) |
|
Cenelec |
EN 61010-2-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-051: Particular requirements for laboratory equipment for mixing and stirring IEC 61010-2-051:2003 |
EN 61010-2-051:1995 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization IEC 61010-2-061:2003 |
EN 61010-2-061:1996 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 61010-2-081:2002 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes IEC 61010-2-081:2001 |
|
|
|
|
EN 61010-2-081:2002/A1:2003 IEC 61010-2-081:2001/A1:2003 |
Note 3 |
Date expired (1.10.2006) |
|
Cenelec |
EN 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-091: Particular requirements for cabinet X-ray systems IEC 61010-2-091:2012 |
|
|
|
|
EN 61010-2-091:2012/AC:2013 |
|
|
|
Cenelec |
EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-201: Particular requirements for control equipment IEC 61010-2-201:2013 |
|
1.4.2016 |
|
|
EN 61010-2-201:2013/AC:2013 |
|
|
|
Cenelec |
EN 61010-031:2002 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test IEC 61010-031:2002 |
EN 61010-2-031:1994 Note 2.1 |
Date expired (1.2.2005) |
|
|
EN 61010-031:2002/A1:2008 IEC 61010-031:2002/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
Cenelec |
EN 61028:1993 Electrical measuring instruments — X-Y recorders IEC 61028:1991 |
|
|
|
|
EN 61028:1993/A2:1997 IEC 61028:1991/A2:1997 |
Note 3 |
Date expired (1.7.1998) |
|
Cenelec |
EN 61034-1:2005 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus IEC 61034-1:2005 |
EN 50268-1:1999 Note 2.1 |
Date expired (1.6.2008) |
|
Cenelec |
EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions — Part 2: Test procedure and requirements IEC 61034-2:2005 |
EN 50268-2:1999 Note 2.1 |
Date expired (1.6.2008) |
|
|
EN 61034-2:2005/A1:2013 IEC 61034-2:2005/A1:2013 |
Note 3 |
25.6.2016 |
|
Cenelec |
EN 61048:2006 Auxiliaries for lamps — Capacitors for use in tubular fluorescent and other discharge lamp circuits — General and safety requirements IEC 61048:2006 |
EN 61048:1993 + A1:1996 + A2:1999 Note 2.1 |
Date expired (1.5.2009) |
|
Cenelec |
EN 61050:1992 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (generally called neon-transformers) — General and safety requirements IEC 61050:1991 (Modified) |
|
|
|
|
EN 61050:1992/A1:1995 IEC 61050:1991/A1:1994 (Modified) |
Note 3 |
Date expired (1.7.1996) |
|
Cenelec |
EN 61058-1:2002 Switches for appliances — Part 1: General requirements IEC 61058-1:2000 (Modified) + A1:2001 |
EN 61058-1:1992 + A1:1993 Note 2.1 |
Date expired (1.3.2009) |
|
|
EN 61058-1:2002/A2:2008 IEC 61058-1:2000/A2:2007 |
Note 3 |
Date expired (1.12.2010) |
|
Cenelec |
EN 61058-2-1:1993 Switches for appliances — Part 2-1: Particular requirements for cord switches IEC 61058-2-1:1992 |
|
|
|
|
EN 61058-2-1:1993/A1:1996 IEC 61058-2-1:1992/A1:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 61058-2-1:1993/A11:2002 |
Note 3 |
Date expired (1.3.2009) |
|
Cenelec |
EN 61058-2-1:2011 Switches for appliances — Part 2-1: Particular requirements for cord switches IEC 61058-2-1:2010 |
EN 61058-2-1:1993 and its amendments Note 2.1 |
Date expired (1.1.2014) |
|
Cenelec |
EN 61058-2-4:2005 Switches for appliances — Part 2-4: Particular requirements for independently mounted switches IEC 61058-2-4:1995 + A1:2003 |
|
|
|
Cenelec |
EN 61058-2-5:1994 Switches for appliances — Part 2-5: Particular requirements for change-over selectors IEC 61058-2-5:1994 |
|
|
|
|
EN 61058-2-5:1994/A11:2002 |
Note 3 |
Date expired (1.3.2009) |
|
Cenelec |
EN 61058-2-5:2011 Switches for appliances — Part 2-5: Particular requirements for change-over selectors IEC 61058-2-5:2010 |
EN 61058-2-5:1994 and its amendment Note 2.1 |
Date expired (3.1.2014) |
|
Cenelec |
EN 61071:2007 Capacitors for power electronics IEC 61071:2007 |
EN 61071-1:1996 + EN 61071-2:1996 Note 2.1 |
Date expired (1.4.2010) |
|
Cenelec |
EN 61095:2009 Electromechanical contactors for household and similar purposes IEC 61095:2009 |
EN 61095:1993 + A1:2000 Note 2.1 |
Date expired (1.3.2012) |
|
Cenelec |
EN 61131-2:2007 Programmable controllers — Part 2: Equipment requirements and tests IEC 61131-2:2007 |
EN 61131-2:2003 Note 2.1 |
Date expired (1.8.2010) |
|
Cenelec |
EN 61138:2007 Cables for portable earthing and short-circuiting equipment IEC 61138:2007 (Modified) |
EN 61138:1997 + A11:2003 Note 2.1 |
Date expired (1.10.2009) |
|
Cenelec |
EN 61140:2002 Protection against electric shock — Common aspects for installation and equipment IEC 61140:2001 |
|
|
|
|
EN 61140:2002/A1:2006 IEC 61140:2001/A1:2004 (Modified) |
Note 3 |
Date expired (1.5.2009) |
|
Cenelec |
EN 61143-1:1994 Electrical measuring instruments — X-t recorders — Part 1: Definitions and requirements IEC 61143-1:1992 |
|
|
|
|
EN 61143-1:1994/A1:1997 IEC 61143-1:1992/A1:1997 |
Note 3 |
Date expired (1.7.1998) |
|
Cenelec |
EN 61143-2:1994 Electrical measuring instruments — X-t recorders — Part 2: Recommended additional test methods IEC 61143-2:1992 |
|
|
|
Cenelec |
EN 61167:1994 Metal halide lamps IEC 61167:1992 |
|
|
|
|
EN 61167:1994/A1:1995 IEC 61167:1992/A1:1995 |
Note 3 |
Date expired (1.3.1996) |
|
|
EN 61167:1994/A2:1997 IEC 61167:1992/A2:1997 |
Note 3 |
Date expired (1.4.1998) |
|
|
EN 61167:1994/A3:1998 IEC 61167:1992/A3:1998 |
Note 3 |
Date expired (1.7.2001) |
|
Cenelec |
EN 61184:2008 Bayonet lampholders IEC 61184:2008 |
EN 61184:1997 + A1:2001 + A2:2004 |
Date expired (1.8.2011) |
|
|
EN 61184:2008/A1:2011 IEC 61184:2008/A1:2011 + IEC |
Note 3 |
25.5.2014 |
|
Cenelec |
EN 61187:1994 Electrical and electronic measuring equipment — Documentation IEC 61187:1993 (Modified) |
|
|
|
|
EN 61187:1994/AC:1995 |
|
|
|
Cenelec |
EN 61195:1999 Double-capped fluorescent lamps — Safety specifications IEC 61195:1999 |
EN 61195:1994 + A1:1998 Note 2.1 |
Date expired (1.12.2002) |
|
|
EN 61195:1999/A1:2013 IEC 61195:1999/A1:2012 |
Note 3 |
16.11.2015 |
|
Cenelec |
EN 61199:1999 Single-capped fluorescent lamps — Safety specifications IEC 61199:1999 |
EN 61199:1994 + A1:1997 + A2:1998 Note 2.1 |
Date expired (1.12.2002) |
|
Cenelec |
EN 61199:2011 Single-capped fluorescent lamps — Safety specifications IEC 61199:2011 |
EN 61199:1999 Note 2.1 |
15.8.2014 |
|
|
EN 61199:2011/A1:2013 IEC 61199:2011/A1:2012 |
Note 3 |
1.11.2015 |
|
Cenelec |
EN 61204:1995 Low-voltage power supply devices, d.c. output — Performance characteristics IEC 61204:1993 (Modified) |
|
|
|
Cenelec |
EN 61204-7:2006 Low voltage power supplies, d.c. output — Part 7: Safety requirements IEC 61204-7:2006 |
|
|
|
|
EN 61204-7:2006/A11:2009 |
Note 3 |
Date expired (1.6.2012) |
|
Cenelec |
EN 61210:2010 Connecting devices — Flat quick-connect terminations for electrical copper conductors — Safety requirements IEC 61210:2010 (Modified) |
EN 61210:1995 Note 2.1 |
Date expired (1.11.2013) |
|
Cenelec |
EN 61230:2008 Live working — Portable equipment for earthing or earthing and short-circuiting IEC 61230:2008 |
EN 61230:1995 + A11:1999 Note 2.1 |
Date expired (1.10.2011) |
|
Cenelec |
EN 61236:1995 Saddles, pole clamps (stick clamps) and accessories for live working IEC 61236:1993 (Modified) |
|
|
|
Cenelec |
EN 61242:1997 Electrical accessories — Cable reels for household and similar purposes IEC 61242:1995 (Modified) |
|
|
|
|
EN 61242:1997/A1:2008 IEC 61242:1995/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 61242:1997/A1:2008/AC:2010 |
|
|
|
EN 61242:1997 covers the safety objectives of directive 2006/95/EC only if, in conjunction, Commission Opinion 2003/C 297/06 is taken into account. |
|||
|
Cenelec |
EN 61243-3:2010 Live working — Voltage detectors — Part 3: Two-pole low-voltage type IEC 61243-3:2009 |
EN 61243-3:1998 Note 2.1 |
Date expired (1.5.2013) |
|
Cenelec |
EN 61270-1:1996 Capacitors for microwave ovens — Part 1: General IEC 61270-1:1996 |
|
|
|
Cenelec |
EN 61293:1994 Marking of electrical equipment with ratings related to electrical supply — Safety requirements IEC 61293:1994 |
|
|
|
Cenelec |
EN 61310-1:2008 Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals IEC 61310-1:2007 |
EN 61310-1:1995 Note 2.1 |
Date expired (1.12.2010) |
|
Cenelec |
EN 61310-2:2008 Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking IEC 61310-2:2007 |
EN 61310-2:1995 Note 2.1 |
Date expired (1.12.2010) |
|
Cenelec |
EN 61310-3:2008 Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators IEC 61310-3:2007 |
EN 61310-3:1999 Note 2.1 |
Date expired (1.12.2010) |
|
Cenelec |
EN 61316:1999 Industrial cable reels IEC 61316:1999 |
|
|
|
Cenelec |
EN 61347-1:2008 Lamp controlgear — Part 1: General and safety requirements IEC 61347-1:2007 (Modified) |
EN 61347-1:2001 + A1:2008 Note 2.1 |
Date expired (1.5.2011) |
|
|
EN 61347-1:2008/A1:2011 IEC 61347-1:2007/A1:2010 |
Note 3 |
Date expired (1.2.2014) |
|
|
EN 61347-1:2008/A2:2013 IEC 61347-1:2007/A2:2012 |
Note 3 |
1.1.2016 |
|
Cenelec |
EN 61347-2-2:2001 Lamp controlgear — Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps IEC 61347-2-2:2000 |
EN 61046:1994 + A1:1996 Note 2.1 |
Date expired (1.12.2006) |
|
|
EN 61347-2-2:2001/A1:2006 IEC 61347-2-2:2000/A1:2005 |
Note 3 |
Date expired (1.2.2009) |
|
|
EN 61347-2-2:2001/A2:2006 IEC 61347-2-2:2000/A2:2006 |
Note 3 |
Date expired (1.6.2009) |
|
|
EN 61347-2-2:2001/AC:2003 |
|
|
|
|
EN 61347-2-2:2001/A1:2006/AC:2006 |
|
|
|
|
EN 61347-2-2:2001/AC:2010 |
|
|
|
Cenelec |
EN 61347-2-2:2012 Lamp controlgear — Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps IEC 61347-2-2:2011 |
EN 61347-2-2:2001 and its amendments Note 2.1 |
11.1.2015 |
|
Cenelec |
EN 61347-2-3:2001 Lamp controlgear — Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps IEC 61347-2-3:2000 |
EN 60928:1995 + A1:1999 Note 2.1 |
Date expired (1.12.2006) |
|
|
EN 61347-2-3:2001/A1:2004 IEC 61347-2-3:2000/A1:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 61347-2-3:2001/A2:2006 IEC 61347-2-3:2000/A2:2006 |
Note 3 |
Date expired (1.2.2009) |
|
|
EN 61347-2-3:2001/AC:2003 |
|
|
|
|
EN 61347-2-3:2001/AC:2010 |
|
|
|
Cenelec |
EN 61347-2-3:2011 Lamp control gear — Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps IEC 61347-2-3:2011 |
EN 61347-2-3:2001 and its amendments + EN 61347-2-4:2001 Note 2.1 |
23.6.2014 |
|
|
EN 61347-2-3:2011/AC:2011 |
|
|
|
Cenelec |
EN 61347-2-4:2001 Lamp controlgear — Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting IEC 61347-2-4:2000 |
EN 60924:1991 + A1:1994 Note 2.1 |
Date expired (1.12.2006) |
|
|
EN 61347-2-4:2001/AC:2010 |
|
|
|
|
EN 61347-2-4:2001/AC:2003 |
|
|
|
Cenelec |
EN 61347-2-7:2006 Lamp controlgear — Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting IEC 61347-2-7:2006 |
EN 61347-2-7:2001 Note 2.1 |
Date expired (1.11.2009) |
|
|
EN 61347-2-7:2006/AC:2010 |
|
|
|
Cenelec |
EN 61347-2-7:2012 Lamp controlgear — Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) IEC 61347-2-7:2011 |
EN 61347-2-7:2006 Note 2.1 |
11.1.2015 |
|
Cenelec |
EN 61347-2-8:2001 Lamp controlgear — Part 2-8: Particular requirements for ballasts for fluorescent lamps IEC 61347-2-8:2000 |
EN 60920:1991 + A1:1993 + A2:1996 + A11:2000 Note 2.1 |
Date expired (1.12.2006) |
|
|
EN 61347-2-8:2001/A1:2006 IEC 61347-2-8:2000/A1:2006 |
Note 3 |
Date expired (1.2.2009) |
|
|
EN 61347-2-8:2001/AC:2010 |
|
|
|
|
EN 61347-2-8:2001/AC:2003 |
|
|
|
Cenelec |
EN 61347-2-9:2001 Lamp controlgear — Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) IEC 61347-2-9:2000 |
EN 60922:1997 Note 2.1 |
Date expired (1.12.2006) |
|
|
EN 61347-2-9:2001/A1:2003 IEC 61347-2-9:2000/A1:2003 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 61347-2-9:2001/A2:2006 IEC 61347-2-9:2000/A2:2006 |
Note 3 |
Date expired (1.7.2009) |
|
|
EN 61347-2-9:2001/AC:2003 |
|
|
|
|
EN 61347-2-9:2001/AC:2010 |
|
|
|
Cenelec |
EN 61347-2-9:2013 Lamp controlgear — Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) IEC 61347-2-9:2012 |
EN 61347-2-9:2001 and its amendments Note 2.1 |
4.12.2015 |
|
Cenelec |
EN 61347-2-10:2001 Lamp controlgear — Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) IEC 61347-2-10:2000 |
|
|
|
|
EN 61347-2-10:2001/A1:2009 IEC 61347-2-10:2000/A1:2008 |
Note 3 |
Date expired (1.12.2011) |
|
|
EN 61347-2-10:2001/AC:2010 |
|
|
|
Cenelec |
EN 61347-2-11:2001 Lamp controlgear — Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires IEC 61347-2-11:2001 |
|
|
|
|
EN 61347-2-11:2001/AC:2010 |
|
|
|
|
EN 61347-2-11:2001/AC:2002 |
|
|
|
Cenelec |
EN 61347-2-12:2005 Lamp controlgear — Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) IEC 61347-2-12:2005 |
|
|
|
|
EN 61347-2-12:2005/A1:2010 IEC 61347-2-12:2005/A1:2010 |
Note 3 |
Date expired (1.11.2013) |
|
|
EN 61347-2-12:2005/AC:2010 |
|
|
|
Cenelec |
EN 61347-2-13:2006 Lamp controlgear — Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules IEC 61347-2-13:2006 |
|
|
|
|
EN 61347-2-13:2006/AC:2010 |
|
|
|
Cenelec |
EN 61386-1:2008 Conduit systems for cable management — Part 1: General requirements IEC 61386-1:2008 |
EN 61386-1:2004 Note 2.1 |
Date expired (1.6.2011) |
|
Cenelec |
EN 61386-21:2004 Conduit systems for cable management — Part 21: Particular requirements — Rigid conduit systems IEC 61386-21:2002 |
EN 50086-2-1:1995 + A11:1998 Note 2.1 |
Date expired (30.6.2008) |
|
|
EN 61386-21:2004/A11:2010 |
Note 3 |
Date expired (1.12.2013) |
|
|
EN 61386-21:2004/AC:2004 |
|
|
|
Cenelec |
EN 61386-22:2004 Conduit systems for cable management — Part 22: Particular requirements — Pliable conduit systems IEC 61386-22:2002 |
EN 50086-2-2:1995 + A11:1998 Note 2.1 |
Date expired (30.6.2008) |
|
|
EN 61386-22:2004/A11:2010 |
Note 3 |
Date expired (1.12.2013) |
|
|
EN 61386-22:2004/AC:2004 |
|
|
|
Cenelec |
EN 61386-23:2004 Conduit systems for cable management — Part 23: Particular requirements — Flexible conduit systems IEC 61386-23:2002 |
EN 50086-2-3:1995 + A11:1998 Note 2.1 |
Date expired (30.6.2008) |
|
|
EN 61386-23:2004/A11:2010 |
Note 3 |
Date expired (1.12.2013) |
|
|
EN 61386-23:2004/AC:2004 |
|
|
|
Cenelec |
EN 61386-24:2010 Conduit systems for cable management — Part 24: Particular requirements — Conduit systems buried underground IEC 61386-24:2004 |
EN 50086-2-4:1994 + A1:2001 |
Date expired (1.10.2013) |
|
Cenelec |
EN 61386-25:2011 Conduit systems for cable management — Part 25: Particular requirements — Conduit fixing devices IEC 61386-25:2011 |
|
|
|
Cenelec |
EN 61439-1:2009 Low-voltage switchgear and controlgear assemblies — Part 1: General rules IEC 61439-1:2009 (Modified) |
EN 60439-1:1999 and its amendment Note 2.1 |
1.11.2014 |
|
|
EN 61439-1:2009/AC:2013 |
|
|
|
Cenelec |
EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies — Part 1: General rules IEC 61439-1:2011 |
EN 61439-1:2009 Note 2.1 |
23.9.2014 |
|
Cenelec |
EN 61439-2:2009 Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies IEC 61439-2:2009 |
|
|
|
Cenelec |
EN 61439-2:2011 Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies IEC 61439-2:2011 |
EN 61439-2:2009 Note 2.1 |
23.9.2014 |
|
Cenelec |
EN 61439-3:2012 Low-voltage switchgear and controlgear assemblies — Part 3: Distribution boards intended to be operated by ordinary persons (DBO) IEC 61439-3:2012 |
EN 60439-3:1991 and its amendments Note 2.1 |
22.3.2015 |
|
Cenelec |
EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies — Part 4: Particular requirements for assemblies for construction sites (ACS) IEC 61439-4:2012 |
EN 60439-4:2004 Note 2.1 |
20.12.2015 |
|
Cenelec |
EN 61439-5:2011 Low-voltage switchgear and controlgear assemblies — Part 5: Assemblies for power distribution in public networks IEC 61439-5:2010 |
EN 60439-5:2006 Note 2.1 |
3.1.2016 |
|
Cenelec |
EN 61439-6:2012 Low-voltage switchgear and controlgear assemblies — Part 6: Busbar trunking systems (busways) IEC 61439-6:2012 |
EN 60439-2:2000 and its amendment Note 2.1 |
27.6.2015 |
|
Cenelec |
EN 61534-1:2003 Powertrack systems — Part 1: General requirements IEC 61534-1:2003 |
|
|
|
Cenelec |
EN 61534-1:2011 Powertrack systems — Part 1: General requirements IEC 61534-1:2011 |
EN 61534-1:2003 Note 2.1 |
22.6.2014 |
|
Cenelec |
EN 61534-21:2006 Powertrack systems — Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting IEC 61534-21:2006 |
|
|
|
Cenelec |
EN 61534-22:2009 Powertrack systems — Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation IEC 61534-22:2009 |
|
|
|
Cenelec |
EN 61535:2009 Installation couplers intended for permanent connection in fixed installations IEC 61535:2009 (Modified) |
|
|
|
|
EN 61535:2009/A1:2013 IEC 61535:2009/A1:2012 |
Note 3 |
20.6.2015 |
|
Cenelec |
EN 61537:2007 Cable management — Cable tray systems and cable ladder systems IEC 61537:2006 |
EN 61537:2001 Note 2.1 |
Date expired (1.12.2009) |
|
Cenelec |
EN 61549:2003 Miscellaneous lamps IEC 61549:2003 |
EN 61549:1996 + A1:1997 + A2:2001 Note 2.1 |
Date expired (1.6.2006) |
|
|
EN 61549:2003/A1:2005 IEC 61549:2003/A1:2005 |
Note 3 |
Date expired (1.4.2008) |
|
|
EN 61549:2003/A2:2010 IEC 61549:2003/A2:2010 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 61549:2003/A3:2012 IEC 61549:2003/A3:2012 |
Note 3 |
9.8.2015 |
|
Cenelec |
EN 61557-1:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 1: General requirements IEC 61557-1:2007 |
EN 61557-1:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-2:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 2: Insulation resistance IEC 61557-2:2007 |
EN 61557-2:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-3:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 3: Loop impedance IEC 61557-3:2007 |
EN 61557-3:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-4:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 4: Resistance of earth connection and equipotential bonding IEC 61557-4:2007 |
EN 61557-4:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-5:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 5: Resistance to earth IEC 61557-5:2007 |
EN 61557-5:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-6:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems IEC 61557-6:2007 |
EN 61557-6:1998 Note 2.1 |
Date expired (1.10.2010) |
|
Cenelec |
EN 61557-7:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 7: Phase sequence IEC 61557-7:2007 |
EN 61557-7:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-8:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 8: Insulation monitoring devices for IT systems IEC 61557-8:2007 |
EN 61557-8:1997 Note 2.1 |
Date expired (1.5.2010) |
|
Cenelec |
EN 61557-9:2009 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 9: Equipment for insulation fault location in IT systems IEC 61557-9:2009 |
EN 61557-9:1999 Note 2.1 |
Date expired (1.2.2012) |
|
Cenelec |
EN 61557-10:2001 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures IEC 61557-10:2000 |
|
|
|
Cenelec |
EN 61557-10:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures IEC 61557-10:2013 |
EN 61557-10:2001 Note 2.1 |
3.6.2016 |
|
Cenelec |
EN 61557-11:2009 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems IEC 61557-11:2009 |
|
|
|
Cenelec |
EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 12: Performance measuring and monitoring devices (PMD) IEC 61557-12:2007 |
|
|
|
Cenelec |
EN 61557-13:2011 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems IEC 61557-13:2011 |
|
|
|
Cenelec |
EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 14: Equipment for testing the safety of electrical equipment of machinery IEC 61557-14:2013 |
|
|
|
Cenelec |
EN 61558-1:1997 Safety of power transformers, power supply units and similar — Part 1: General requirements and tests IEC 61558-1:1997 (Modified) |
EN 60742:1995 Note 2.1 |
Date expired (1.12.2005) |
|
|
EN 61558-1:1997/A1:1998 IEC 61558-1:1997/A1:1998 |
Note 3 |
Date expired (1.1.2001) |
|
|
EN 61558-1:1997/A11:2003 |
Note 3 |
Date expired (1.12.2005) |
|
Cenelec |
EN 61558-1:2005 Safety of power transformers, power supplies, reactors and similar products — Part 1: General requirements and tests IEC 61558-1:2005 |
EN 61558-1:1997 and its amendments Note 2.1 |
Date expired (1.12.2005) |
|
|
EN 61558-1:2005/A1:2009 IEC 61558-1:2005/A1:2009 |
Note 3 |
Date expired (1.3.2012) |
|
|
EN 61558-1:2005/AC:2006 |
|
|
|
Cenelec |
EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products — Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications IEC 61558-2-1:2007 |
EN 61558-2-1:1997 Note 2.1 |
Date expired (1.2.2010) |
|
Cenelec |
EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products — Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers IEC 61558-2-2:2007 |
EN 61558-2-2:1998 Note 2.1 |
Date expired (1.2.2010) |
|
Cenelec |
EN 61558-2-3:2010 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners IEC 61558-2-3:2010 |
EN 61558-2-3:2000 Note 2.1 |
Date expired (1.7.2013) |
|
Cenelec |
EN 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers IEC 61558-2-4:2009 |
EN 61558-2-4:1997 Note 2.1 |
Date expired (1.3.2012) |
|
Cenelec |
EN 61558-2-5:2010 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units IEC 61558-2-5:2010 |
EN 61558-2-5:1998 + A11:2004 |
Date expired (1.7.2013) |
|
Cenelec |
EN 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers IEC 61558-2-6:2009 |
EN 61558-2-6:1997 Note 2.1 |
Date expired (1.7.2012) |
|
Cenelec |
EN 61558-2-7:2007 Safety of power transformers, power supplies, reactors and similar products — Part 2-7: Particular requirements and tests for transformers and power supplies for toys IEC 61558-2-7:2007 (Modified) |
EN 61558-2-7:1997 + A11:2002 Note 2.1 |
Date expired (1.9.2010) |
|
Cenelec |
EN 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes IEC 61558-2-8:2010 |
EN 61558-2-8:1998 Note 2.1 |
Date expired (1.7.2013) |
|
Cenelec |
EN 61558-2-9:2003 Safety of power transformers, power supply units and similar products — Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps IEC 61558-2-9:2002 |
EN 60742:1995 Note 2.1 |
Date expired (1.12.2005) |
|
Cenelec |
EN 61558-2-9:2011 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps IEC 61558-2-9:2010 |
EN 61558-2-9:2003 Note 2.1 |
Date expired (2.1.2014) |
|
Cenelec |
EN 61558-2-12:2001 Safety of power transformers, power supply units and similar devices — Part 2-12: Particular requirements for constant voltage transformers IEC 61558-2-12:2001 |
|
|
|
Cenelec |
EN 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage IEC 61558-2-12:2011 |
EN 61558-2-12:2001 Note 2.1 |
Date expired (3.3.2014) |
|
Cenelec |
EN 61558-2-13:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers IEC 61558-2-13:2009 |
EN 61558-2-13:2000 Note 2.1 |
Date expired (1.3.2012) |
|
Cenelec |
EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof — Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers IEC 61558-2-14:2012 |
|
|
|
Cenelec |
EN 61558-2-15:2001 Safety of power transformers, power supply units and similar — Part 2-15: Particular requirements for isolating transformers for the supply of medical locations IEC 61558-2-15:1999 (Modified) |
|
|
|
|
EN 61558-2-15:2001/AC:2004 |
|
|
|
Cenelec |
EN 61558-2-15:2012 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations IEC 61558-2-15:2011 |
EN 61558-2-15:2001 Note 2.1 |
27.12.2014 |
|
Cenelec |
EN 61558-2-16:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units IEC 61558-2-16:2009 |
EN 61558-2-17:1997 Note 2.1 |
Date expired (1.10.2012) |
|
|
EN 61558-2-16:2009/A1:2013 IEC 61558-2-16:2009/A1:2013 |
Note 3 |
16.9.2016 |
|
Cenelec |
EN 61558-2-20:2000 Safety of power transformers, power supply units and similar devices — Part 2-20: Particular requirements for small reactors IEC 61558-2-20:2000 |
|
|
|
Cenelec |
EN 61558-2-20:2011 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-20: Particular requirements and tests for small reactors IEC 61558-2-20:2010 |
EN 61558-2-20:2000 Note 2.1 |
Date expired (2.1.2014) |
|
Cenelec |
EN 61558-2-23:2010 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites IEC 61558-2-23:2010 |
EN 61558-2-23:2000 Note 2.1 |
Date expired (1.10.2013) |
|
Cenelec |
EN 61558-2-26:2013 Safety of transformers, reactors, power supply units and combinations thereof — Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes IEC 61558-2-26:2013 |
|
|
|
Cenelec |
EN 61643-11:2002 Low-voltage surge protective devices — Part 11: Surge protective devices connected to low-voltage power systems — Requirements and tests IEC 61643-1:1998 (Modified) |
|
|
|
|
EN 61643-11:2002/A11:2007 |
Note 3 |
Date expired (1.7.2009) |
|
Cenelec |
EN 61643-11:2012 Low-voltage surge protective devices — Part 11: Surge protective devices connected to low-voltage power systems — Requirements and test methods IEC 61643-11:2011 (Modified) |
EN 61643-11:2002 and its amendment Note 2.1 |
27.8.2015 |
|
Cenelec |
EN 61643-21:2001 Low voltage surge protective devices — Part 21: Surge protective devices connected to telecommunications and signalling networks — Performance requirements and testing methods IEC 61643-21:2000 |
|
|
|
|
EN 61643-21:2001/A1:2009 IEC 61643-21:2000/A1:2008 (Modified) |
Note 3 |
Date expired (1.3.2012) |
|
|
EN 61643-21:2001/A2:2013 IEC 61643-21:2000/A2:2012 |
Note 3 |
31.8.2015 |
|
Cenelec |
EN 61730-1:2007 Photovoltaic (PV) module safety qualification — Part 1: Requirements for construction IEC 61730-1:2004 (Modified) |
|
|
|
|
EN 61730-1:2007/A1:2012 IEC 61730-1:2004/A1:2011 |
Note 3 |
19.12.2014 |
|
|
EN 61730-1:2007/A2:2013 IEC 61730-1:2004/A2:2013 |
Note 3 |
18.4.2016 |
|
Cenelec |
EN 61730-2:2007 Photovoltaic (PV) module safety qualification — Part 2: Requirements for testing IEC 61730-2:2004 (Modified) |
|
|
|
|
EN 61730-2:2007/A1:2012 IEC 61730-2:2004/A1:2011 |
Note 3 |
19.12.2014 |
|
Cenelec |
EN 61770:2009 Electric appliances connected to the water mains — Avoidance of backsiphonage and failure of hose-sets IEC 61770:2008 |
EN 61770:1999 + A1:2004 + A2:2006 Note 2.1 |
Date expired (1.5.2012) |
|
|
EN 61770:2009/AC:2011 |
|
|
|
Cenelec |
EN 61800-5-1:2007 Adjustable speed electrical power drive systems — Part 5-1: Safety requirements — Electrical, thermal and energy IEC 61800-5-1:2007 |
EN 61800-5-1:2003 Note 2.1 |
Date expired (1.8.2010) |
|
Cenelec |
EN 61812-1:1996 Specified time relays for industrial use — Part 1: Requirements and tests IEC 61812-1:1996 |
|
|
|
|
EN 61812-1:1996/A11:1999 |
Note 3 |
Date expired (1.1.2002) |
|
|
EN 61812-1:1996/AC:1999 |
|
|
|
Cenelec |
EN 61812-1:2011 Time relays for industrial and residential use — Part 1: Requirements and tests IEC 61812-1:2011 |
EN 61812-1:1996 and its amendment Note 2.1 |
29.6.2014 |
|
Cenelec |
EN 61851-1:2001 Electric vehicle conductive charging system — Part 1: General requirements IEC 61851-1:2001 |
|
|
|
Cenelec |
EN 61851-1:2011 Electric vehicle conductive charging system — Part 1: General requirements IEC 61851-1:2010 |
EN 61851-1:2001 Note 2.1 |
Date expired (1.4.2014) |
|
Cenelec |
EN 61851-21:2002 Electric vehicle conductive charging system — Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply IEC 61851-21:2001 |
|
|
|
Cenelec |
EN 61851-22:2002 Electric vehicle conductive charging system — Part 22: AC electric vehicle charging station IEC 61851-22:2001 |
|
|
|
Cenelec |
EN 61869-1:2009 Instrument transformers — Part 1: General requirements IEC 61869-1:2007 (Modified) |
|
|
|
Cenelec |
EN 61869-2:2012 Instrument transformers — Part 2: Additional requirements for current transformers IEC 61869-2:2012 |
|
|
|
Cenelec |
EN 61869-3:2011 Instrument transformers — Part 3: Additional requirements for inductive voltage transformers IEC 61869-3:2011 |
|
|
|
Cenelec |
EN 61869-5:2011 Instrument transformers — Part 5: Additional requirements for capacitor voltage transformers IEC 61869-5:2011 |
|
|
|
Cenelec |
EN 61914:2009 Cable cleats for electrical installations IEC 61914:2009 |
EN 50368:2003 Note 2.1 |
Date expired (1.4.2012) |
|
|
EN 61914:2009/AC:2009 |
|
|
|
Cenelec |
EN 61921:2003 Power capacitors — Low-voltage power factor correction banks IEC 61921:2003 |
|
|
|
Cenelec |
EN 61995-1:2008 Devices for the connection of luminaires for household and similar purposes — Part 1: General requirements IEC 61995-1:2005 (Modified) |
|
|
|
Cenelec |
EN 61995-2:2009 Devices for the connection of luminaires for household and similar purposes — Part 2: Standard sheets for DCL IEC 61995-2:2009 |
|
|
|
Cenelec |
EN 62020:1998 Electrical accessories — Residual current monitors for household and similar uses (RCMs) IEC 62020:1998 |
|
|
|
|
EN 62020:1998/A1:2005 IEC 62020:1998/A1:2003 (Modified) |
Note 3 |
Date expired (1.3.2008) |
|
Cenelec |
EN 62026-1:2007 Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 1: General rules IEC 62026-1:2007 |
|
|
|
Cenelec |
EN 62026-2:2013 Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 2: Actuator sensor interface (AS-i) IEC 62026-2:2008 (Modified) |
|
|
|
Cenelec |
EN 62026-3:2009 Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 3: DeviceNet IEC 62026-3:2008 |
|
|
|
Cenelec |
EN 62026-7:2013 Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 7: CompoNet IEC 62026-7:2010 (Modified) |
|
|
|
Cenelec |
EN 62031:2008 LED modules for general lighting — Safety specifications IEC 62031:2008 |
|
|
|
|
EN 62031:2008/A1:2013 IEC 62031:2008/A1:2012 |
Note 3 |
3.12.2015 |
|
Cenelec |
EN 62035:2000 Discharge lamps (excluding fluorescent lamps) — Safety specifications IEC 62035:1999 (Modified) |
|
|
|
|
EN 62035:2000/A1:2003 IEC 62035:1999/A1:2003 (Modified) |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 62035:2000/A2:2012 IEC 62035:1999/A2:2012 |
Note 3 |
31.8.2015 |
|
Cenelec |
EN 62040-1:2008 Uninterruptible power systems (UPS) — Part 1: General and safety requirements for UPS IEC 62040-1:2008 |
EN 62040-1-1:2003 + EN 62040-1-2:2003 Note 2.1 |
Date expired (1.9.2011) |
|
|
EN 62040-1:2008/A1:2013 IEC 62040-1:2008/A1:2013 |
Note 3 |
14.2.2016 |
|
|
EN 62040-1:2008/AC:2009 |
|
|
|
Cenelec |
EN 62080:2009 Sound signalling devices for household and similar purposes IEC 62080:2001 + A1:2008 |
|
|
|
Cenelec |
EN 62094-1:2003 Indicator light units for household and similar fixed-electrical installations — Part 1: General requirements IEC 62094-1:2002 |
|
|
|
|
EN 62094-1:2003/A11:2003 |
Note 3 |
Date expired (1.7.2006) |
|
Cenelec |
EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems — Part 1: General requirements IEC 62109-1:2010 |
|
|
|
Cenelec |
EN 62109-2:2011 Safety of power converters for use in photovoltaic power systems — Part 2: Particular requirements for inverters IEC 62109-2:2011 |
|
|
|
Cenelec |
EN 62135-1:2008 Resistance welding equipment — Part 1: Safety requirements for design, manufacture and installation IEC 62135-1:2008 |
EN 50063:1989 Note 2.1 |
Date expired (1.10.2011) |
|
Cenelec |
EN 62196-1:2003 Plugs, socket-outlets, vehicle couplers and vehicle inlets — Conductive charging of electric vehicles — Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. IEC 62196-1:2003 |
|
|
|
Cenelec |
EN 62196-1:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 1: General requirements IEC 62196-1:2011 |
EN 62196-1:2003 Note 2.1 |
1.2.2015 |
|
|
EN 62196-1:2012/A11:2013 |
Note 3 |
15.10.2017 |
|
|
EN 62196-1:2012/AC:2012 |
|
|
|
Cenelec |
EN 62196-2:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories IEC 62196-2:2011 |
|
|
|
|
EN 62196-2:2012/A11:2013 |
Note 3 |
15.10.2017 |
|
Cenelec |
EN 62208:2003 Empty enclosures for low-voltage switchgear and controlgear assemblies — General requirements IEC 62208:2002 |
EN 50298:1998 Note 2.1 |
Date expired (1.12.2006) |
|
Cenelec |
EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies — General requirements IEC 62208:2011 |
EN 62208:2003 Note 2.1 |
23.9.2014 |
|
Cenelec |
EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure IEC 62233:2005 (Modified) |
EN 50366:2003 + A1:2006 Note 2.1 |
Date expired (1.12.2012) |
|
|
EN 62233:2008/AC:2008 |
|
|
|
Cenelec |
EN 62253:2011 Photovoltaic pumping systems — Design qualification and performance measurements IEC 62253:2011 |
|
|
|
Cenelec |
EN 62275:2009 Cable management systems — Cable ties for electrical installations IEC 62275:2006 (Modified) |
EN 50146:2000 Note 2.1 |
Date expired (1.7.2012) |
|
Cenelec |
EN 62282-3-1:2007 Fuel cell technologies — Part 3-1: Stationary fuel cell power systems — Safety IEC 62282-3-1:2007 |
|
|
|
Cenelec |
EN 62282-3-3:2008 Fuel cell technologies — Part 3-3: Stationary fuel cell power systems — Installation IEC 62282-3-3:2007 |
|
|
|
Cenelec |
EN 62282-3-100:2012 Fuel cell technologies — Part 3-100: Stationary fuel cell power systems — Safety IEC 62282-3-100:2012 |
EN 62282-3-1:2007 Note 2.1 |
22.3.2015 |
|
Cenelec |
EN 62282-3-300:2012 Fuel cell technologies — Part 3-300: Stationary fuel cell power systems — Installation IEC 62282-3-300:2012 |
EN 62282-3-3:2008 Note 2.1 |
19.7.2015 |
|
Cenelec |
EN 62282-5-1:2012 Fuel cell technologies — Part 5-1: Portable fuel cell power systems — Safety IEC 62282-5-1:2012 |
|
|
|
Cenelec |
EN 62310-1:2005 Static transfer systems (STS) — Part 1: General and safety requirements IEC 62310-1:2005 |
|
|
|
Cenelec |
EN 62311:2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz — 300 GHz) IEC 62311:2007 (Modified) |
|
|
|
Cenelec |
EN 62395-1:2006 Electrical resistance trace heating systems for industrial and commercial applications — Part 1: General and testing requirements IEC 62395-1:2006 |
|
|
|
Cenelec |
EN 62395-1:2013 Electrical resistance trace heating systems for industrial and commercial applications — Part 1: General and testing requirements IEC 62395-1:2013 |
EN 62395-1:2006 Note 2.1 |
14.10.2016 |
|
Cenelec |
EN 62423:2009 Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs) IEC 62423:2007 (Modified) |
|
|
|
Cenelec |
EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses IEC 62423:2009 (Modified) |
EN 62423:2009 Note 2.1 |
19.6.2017 |
|
Cenelec |
EN 62444:2013 Cable glands for electrical installations IEC 62444:2010 (Modified) |
EN 50262:1998 and its amendments Note 2.1 |
23.9.2016 |
|
Cenelec |
EN 62471:2008 Photobiological safety of lamps and lamp systems IEC 62471:2006 (Modified) |
EN 60825-1:1994 + A1:2002 + A2:2001 Note 2.1 |
Date expired (1.9.2011) |
|
Cenelec |
EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) IEC 62479:2010 (Modified) |
EN 50371:2002 Note 2.1 |
Date expired (1.9.2013) |
|
Cenelec |
EN 62493:2010 Assessment of lighting equipment related to human exposure to electromagnetic fields IEC 62493:2009 |
|
|
|
Cenelec |
EN 62532:2011 Fluorescent induction lamps — Safety specifications IEC 62532:2011 |
|
|
|
Cenelec |
EN 62549:2011 Articulated systems and flexible systems for cable guiding IEC 62549:2011 |
|
|
|
Cenelec |
EN 62560:2012 Self-ballasted LED-lamps for general lighting services by voltage > 50 V — Safety specifications IEC 62560:2011 (Modified) |
|
|
|
Cenelec |
EN 62606:2013 General requirements for arc fault detection devices IEC 62606:2013 (Modified) |
|
|
|
Cenelec |
HD 21.1 S4:2002 Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation — Part 1: General requirements |
HD 21.1 S3:1997 Note 2.1 |
Date expired (1.9.2003) |
|
Cenelec |
HD 21.3 S3:1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 3: Non-sheathed cables for fixed wiring IEC 60227-3:1993 (Modified) |
|
|
|
|
HD 21.3 S3:1995/A1:1999 |
Note 3 |
Date expired (1.8.2001) |
|
|
HD 21.3 S3:1995/A2:2008 |
Note 3 |
Date expired (1.9.2010) |
|
Cenelec |
HD 21.4 S2:1990 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 4: Sheathed cables for fixed wiring IEC 60227-4:1979 (Modified) |
|
|
|
Cenelec |
HD 21.5 S3:1994 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 5: Flexible cables (cords) IEC 60227-5:1979 (Modified) |
|
|
|
|
HD 21.5 S3:1994/A1:1999 |
Note 3 |
Date expired (1.8.2001) |
|
|
HD 21.5 S3:1994/A2:2001 |
Note 3 |
Date expired (1.4.2003) |
|
Cenelec |
HD 21.7 S2:1996 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 7: Single core non-sheathed cables for internal wiring for a conductor temperature of 90o C |
HD 21.7 S1:1990 + A1:1992 + A2:1993 Note 2.1 |
Date expired (1.9.1996) |
|
|
HD 21.7 S2:1996/A1:1999 |
Note 3 |
Date expired (1.8.2001) |
|
Cenelec |
HD 21.8 S2:1999 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 8: Single core non-sheathed cables for decorative chains |
HD 21.8 S1:1990 + A2:1994 Note 2.1 |
Date expired (1.8.2001) |
|
Cenelec |
HD 21.9 S2:1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 9: Single core non-sheathed cable for installation at low temperatures |
|
|
|
|
HD 21.9 S2:1995/A1:1999 |
Note 3 |
Date expired (1.8.2001) |
|
Cenelec |
HD 21.10 S2:2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 10: Extensible leads |
HD 21.10 S1:1993 Note 2.1 |
Date expired (1.8.2003) |
|
Cenelec |
HD 21.11 S1:1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 11: Cables for luminaires |
|
|
|
|
HD 21.11 S1:1995/A1:2001 |
Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
HD 21.12 S1:1994 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 12: Heat-resistant flexible cables (cords) |
|
|
|
|
HD 21.12 S1:1994/A1:2001 |
Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
HD 21.13 S1:1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 13: Oil resistant PVC sheathed cables with two or more conductors |
|
|
|
|
HD 21.13 S1:1995/A1:2001 |
Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
HD 21.14 S1:2003 Cables of rated voltage up to and including 450/750 V and having thermoplastic insulation — Part 14: Flexible cables (cords), insulated and sheathed with halogen-free thermoplastic compounds |
|
|
|
Cenelec |
HD 21.15 S1:2006 Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation — Part 15: Single core cables, insulated with halogen-free thermoplastic compound, for fixed wiring |
|
|
|
Cenelec |
HD 22.1 S4:2002 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 1: General requirements |
HD 22.1 S3:1997 Note 2.1 |
Date expired (1.9.2003) |
|
Cenelec |
HD 22.3 S4:2004 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 3: Heat resistant silicone rubber insulated cables |
HD 22.3 S3:1995 + A1:1999 Note 2.1 |
Date expired (1.2.2006) |
|
|
HD 22.3 S4:2004/A1:2006 |
Note 3 |
Date expired (1.12.2007) |
|
Cenelec |
HD 22.4 S4:2004 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 4: Cords and flexible cables |
HD 22.4 S3:1995 + A1:1999 + A2:2002 Note 2.1 |
Date expired (1.2.2006) |
|
Cenelec |
HD 22.6 S2:1995 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 6: Arc welding cables |
HD 22.6 S1:1990 Note 2.1 |
Date expired (1.7.1996) |
|
|
HD 22.6 S2:1995/A1:1999 |
Note 3 |
Date expired (1.6.2000) |
|
|
HD 22.6 S2:1995/A2:2004 |
Note 3 |
Date expired (1.2.2006) |
|
|
HD 22.6 S2:1995/AC:1995 |
|
|
|
Cenelec |
HD 22.7 S2:1995 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 7: Cables with increased heat resistance for internal wiring for a conductor temperature of 110 oC |
HD 22.7 S1:1992 Note 2.1 |
Date expired (1.7.1996) |
|
|
HD 22.7 S2:1995/A1:1999 |
Note 3 |
Date expired (1.6.2000) |
|
|
HD 22.7 S2:1995/A2:2004 |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
HD 22.8 S2:1994 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 8: Polychloroprene or equivalent synthetic elastomer sheathed cable for decorative chains |
|
|
|
|
HD 22.8 S2:1994/A1:1999 |
Note 3 |
Date expired (1.6.2000) |
|
|
HD 22.8 S2:1994/A2:2004 |
Note 3 |
Date expired (1.2.2006) |
|
Cenelec |
HD 22.9 S3:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 9: Single core halogen-free non-sheathed cables for fixed wiring having low emission of smoke |
HD 22.9 S2:1995 + A1:1999 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 22.10 S2:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 10: EPR insulated and polyurethane sheathed flexible cables |
HD 22.10 S1:1994 + A1:1999 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 22.11 S2:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 11: EVA cords and flexible cables |
HD 22.11 S1:1995 + A1:1999 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 22.12 S2:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 12: Heat resistant EPR cords and flexible cables |
HD 22.12 S1:1996 + A1:1999 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 22.13 S2:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 13: Halogen-free flexible cables having low emission of smoke |
HD 22.13 S1:1996 + A1:2000 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 22.15 S2:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation — Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber |
HD 22.15 S1:1999 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 308 S2:2001 Identification of cores in cables and flexible cords |
HD 308 S1:1976 Note 2.1 |
Date expired (1.4.2006) |
|
Cenelec |
HD 361 S3:1999 System for cable designation |
|
|
|
|
HD 361 S3:1999/A1:2006 |
Note 3 |
Date expired (1.6.2009) |
|
|
HD 361 S3:1999/AC:1999 |
|
|
|
Cenelec |
HD 368 S1:1978 Direct acting recording electrical measuring instruments and their accessories IEC 60258:1968 + A1:1976 |
|
|
|
Cenelec |
HD 516 S2:1997 Guide to use of low voltage harmonized cables |
|
|
|
|
HD 516 S2:1997/A1:2003 |
Note 3 |
Date expired (1.2.2005) |
|
|
HD 516 S2:1997/A2:2008 |
Note 3 |
Date expired (1.9.2010) |
|
Cenelec |
HD 549 S1:1989 Conference systems — Electrical and audio requirements IEC 60914:1988 |
|
|
|
Cenelec |
HD 597 S1:1992 Coupling capacitors and capacitor dividers IEC 60358:1990 |
|
|
|
|
HD 597 S1:1992/AC:1992 |
|
|
|
Cenelec |
HD 603 S1:1994 Distribution cables of rated voltage 0,6/1 kV |
|
|
|
|
HD 603 S1:1994/A1:1997 |
Note 3 |
Date expired (1.9.1998) |
|
|
HD 603 S1:1994/A2:2003 |
Note 3 |
Date expired (1.2.2006) |
|
|
HD 603 S1:1994/A3:2007 |
Note 3 |
Date expired (1.11.2009) |
|
Cenelec |
HD 604 S1:1994 0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations |
|
|
|
|
HD 604 S1:1994/A1:1997 |
Note 3 |
Date expired (1.12.1997) |
|
|
HD 604 S1:1994/A2:2002 |
Note 3 |
Date expired (1.7.2005) |
|
|
HD 604 S1:1994/A3:2005 |
Note 3 |
Date expired (1.6.2008) |
|
Cenelec |
HD 605 S2:2008 Electric cables — Additional test methods |
HD 605 S1:1994 + A1:1996 + A2:2001 + A3:2002 + A4:2004 Note 2.1 |
Date expired (1.3.2009) |
|
|
HD 605 S2:2008/AC:2010 |
|
|
|
Cenelec |
HD 626 S1:1996 Overhead distribution cables of rated voltage Uo/U(Um): 0,6/1 (1,2) kV |
|
|
|
|
HD 626 S1:1996/A1:1997 |
Note 3 |
Date expired (1.12.1997) |
|
|
HD 626 S1:1996/A2:2002 |
Note 3 |
Date expired (1.8.2003) |
|
Cenelec |
HD 627 S1:1996 Multicore and multipair cables for installation above and below ground |
|
|
|
|
HD 627 S1:1996/A1:2000 |
Note 3 |
Date expired (1.8.2001) |
|
|
HD 627 S1:1996/A2:2005 |
Note 3 |
Date expired (1.6.2008) |
|
Cenelec |
HD 639 S1:2002 Electrical accessories — Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) IEC 61540:1997 (Modified) + A1:1998 (Modified) |
|
|
|
|
HD 639 S1:2002/A1:2003 |
Note 3 |
Date expired (1.6.2005) |
|
|
HD 639 S1:2002/A2:2010 |
Note 3 |
Date expired (1.9.2013) |
|
|
HD 639 S1:2002/AC:2003 |
|
|
|
Cenelec |
HD 60269-2:2010 Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) — Examples of standardized systems of fuses A to J IEC 60269-2:2010 (Modified) |
HD 60269-2:2007 Note 2.1 |
Date expired (1.9.2013) |
|
Cenelec |
HD 60269-2:2013 Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) — Examples of standardized systems of fuses A to K IEC 60269-2:2013 (Modified) |
HD 60269-2:2010 Note 2.1 |
15.8.2016 |
|
Cenelec |
HD 60269-3:2010 Low-voltage fuses — Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) — Examples of standardized systems of fuses A to F IEC 60269-3:2010 (Modified) |
HD 60269-3:2007 Note 2.1 |
Date expired (1.9.2013) |
|
|
HD 60269-3:2010/A1:2013 IEC 60269-3:2010/A1:2013 |
Note 3 |
5.3.2016 |
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No1025/2012. (2) |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘.../AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
|
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel. +32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel. +33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.