ISSN 1977-091X
doi:10.3000/1977091X.C_2013.348.eng
Official Journal
of the European Union
C 348
English edition
Information and Notices
Volume 56
28 November 2013
|
ISSN 1977-091X doi:10.3000/1977091X.C_2013.348.eng |
||
|
Official Journal of the European Union |
C 348 |
|
|
|
||
|
English edition |
Information and Notices |
Volume 56 |
|
Notice No |
Contents |
page |
|
|
IV Notices |
|
|
|
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES |
|
|
|
European Commission |
|
|
2013/C 348/01 |
Commission communication in the framework of the implementation of Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008, Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008, and Regulation (EC) No 1221/2009 of the European Parliament and of the Council of 25 November 2009(Publication of titles and references of harmonised standards under Union harmonisation legislation) ( 1 ) |
|
|
2013/C 348/02 |
Commission communication in the framework of the implementation of Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (Publication of titles and references of harmonised standards under Union harmonisation legislation) ( 1 ) |
|
|
2013/C 348/03 |
Commission communication in the framework of the implementation of Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (Publication of titles and references of harmonised standards under Union harmonisation legislation) ( 1 ) |
|
|
|
NOTICES FROM MEMBER STATES |
|
|
2013/C 348/04 |
Information communicated by Member States regarding State aid granted under Commission Regulation (EC) No 1857/2006 on the application of Articles 87 and 88 of the Treaty to State aid to small and medium-sized enterprises active in the production of agricultural products and amending Regulation (EC) No 70/2001 |
|
|
|
V Announcements |
|
|
|
PROCEDURES RELATING TO THE IMPLEMENTATION OF COMPETITION POLICY |
|
|
|
European Commission |
|
|
2013/C 348/05 |
State aid — United Kingdom — State aid SA.34775 (2013/C) (ex 2012/NN) — Aggregates Levy — Invitation to submit comments pursuant to Article 108(2) of the Treaty on the Functioning of the European Union ( 1 ) |
|
|
2013/C 348/06 |
State aid — United Kingdom — State aid SA.34914 (2013/C) (ex 2013/NN) — Gibraltar Corporate Income Tax Regime — Invitation to submit comments pursuant to Article 108(2) of the Treaty on the Functioning of the European Union ( 1 ) |
|
|
|
|
|
|
(1) Text with EEA relevance |
|
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
|
28.11.2013 |
EN |
Official Journal of the European Union |
C 348/1 |
Commission communication in the framework of the implementation of Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008, Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008, and Regulation (EC) No 1221/2009 of the European Parliament and of the Council of 25 November 2009
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
2013/C 348/01
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
CEN |
EN ISO 9000:2005 Quality management systems - Fundamentals and vocabulary (ISO 9000:2005) |
16.6.2009 |
|
|
|
CEN |
EN ISO 9001:2008 Quality management systems - Requirements (ISO 9001:2008) |
16.6.2009 |
|
|
|
EN ISO 9001:2008/AC:2009 |
5.10.2011 |
|
|
|
|
CEN |
EN ISO 14001:2004 Environmental management systems - Requirements with guidance for use (ISO 14001:2004) |
16.6.2009 |
|
|
|
EN ISO 14001:2004/AC:2009 |
5.10.2011 |
|
|
|
|
CEN |
EN ISO 14004:2010 Environmental management systems - General guidelines on principles, systems and support techniques (ISO 14004:2004) |
5.10.2011 |
|
|
|
CEN |
EN ISO 14015:2010 Environmental management - Environmental assessment of sites and organizations (EASO) (ISO 14015:2001) |
5.10.2011 |
|
|
|
CEN |
EN ISO 14020:2001 Environmental labels and declarations - General principles (ISO 14020:2000) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14021:2001 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:1999) |
16.6.2009 |
|
|
|
EN ISO 14021:2001/A1:2011 |
25.5.2012 |
Note 3 |
30.6.2012 |
|
|
CEN |
EN ISO 14024:2000 Environmental labels and declarations - Type I environmental labelling - Principles and procedures (ISO 14024:1999) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14031:2013 Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013) |
28.11.2013 |
EN ISO 14031:1999 Note 2.1 |
28.2.2014 |
|
CEN |
EN ISO 14040:2006 Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14044:2006 Environmental management - Life cycle assessment - Requirements and guidelines (ISO 14044:2006) |
16.6.2009 |
|
|
|
CEN |
EN ISO 14050:2010 Environmental management - Vocabulary (ISO 14050:2009) |
5.10.2011 |
|
|
|
CEN |
EN ISO 14063:2010 Environmental management - Environmental communication - Guidelines and examples (ISO 14063:2006) |
5.10.2011 |
|
|
|
CEN |
EN ISO 14064-1:2012 Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006) |
28.11.2013 |
|
|
|
CEN |
EN ISO 14064-2:2012 Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2006) |
28.11.2013 |
|
|
|
CEN |
EN ISO 14064-3:2012 Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions (ISO 14064-3:2006) |
28.11.2013 |
|
|
|
CEN |
EN ISO 14065:2013 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2013) |
7.9.2013 |
EN ISO 14065:2012 Note 2.1 |
31.10.2013 |
|
CEN |
EN ISO 15189:2012 Medical laboratories - Requirements for quality and competence (ISO 15189:2012) |
13.3.2013 |
EN ISO 15189:2007 Note 2.1 |
30.11.2015 |
|
CEN |
EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003) |
5.10.2011 |
|
|
|
CEN |
EN ISO/IEC 17000:2004 Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004) |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17011:2004 Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2004) |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17020:2012 Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
25.5.2012 |
EN ISO/IEC 17020:2004 Note 2.1 |
1.3.2015 |
|
CEN |
EN ISO/IEC 17021:2011 Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2011) |
5.10.2011 |
EN ISO/IEC 17021:2006 Note 2.1 |
Date expired (5.10.2011) |
|
CEN |
EN ISO/IEC 17024:2012 Conformity assessment - General requirements for bodies operating certification of persons (ISO/IEC 17024:2012) |
7.9.2013 |
EN ISO/IEC 17024:2003 Note 2.1 |
1.7.2015 |
|
CEN |
EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005) |
16.6.2009 |
|
|
|
EN ISO/IEC 17025:2005/AC:2006 |
16.6.2009 |
|
|
|
|
CEN |
EN ISO/IEC 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies (ISO/IEC 17040:2005) |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
28.11.2013 |
|
|
|
CEN |
EN ISO/IEC 17050-1:2010 Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15) |
5.10.2011 |
EN ISO/IEC 17050-1:2004 Note 2.1 |
Date expired (5.10.2011) |
|
CEN |
EN ISO/IEC 17050-2:2004 Conformity assessment - Supplier's declaration of conformity - Part 2: Supporting documentation (ISO/IEC 17050-2:2004) |
16.6.2009 |
|
|
|
CEN |
EN ISO/IEC 17065:2012 Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
7.9.2013 |
EN 45011:1998 Note 2.1 |
15.9.2015 |
|
CEN |
EN ISO 19011:2011 Guidelines for auditing management systems (ISO 19011:2011) |
25.5.2012 |
EN ISO 19011:2002 Note 2.1 |
31.5.2012 |
|
CEN |
EN ISO 22870:2006 Point-of-care testing (POCT) - Requirements for quality and competence (ISO 22870:2006) |
5.10.2011 |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (“dow”), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda "…/AC:YYYY" are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE, Tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
|
28.11.2013 |
EN |
Official Journal of the European Union |
C 348/5 |
Commission communication in the framework of the implementation of Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
2013/C 348/02
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
(5) |
|
Standards developed by CEN |
||||
|
A-type standards A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a full presumption of conformity. |
||||
|
CEN |
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
8.4.2011 |
EN ISO 12100-1:2003 EN ISO 12100-2:2003 EN ISO 14121-1:2007 Note 2.1 |
30.11.2013 |
|
B-type standards B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards. |
||||
|
CEN |
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
8.9.2009 |
|
|
|
CEN |
EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
8.9.2009 |
|
|
|
CEN |
EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
8.9.2009 |
|
|
|
CEN |
EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data |
8.9.2009 |
|
|
|
CEN |
EN 574:1996+A1:2008 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
8.9.2009 |
|
|
|
CEN |
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
8.9.2009 |
|
|
|
CEN |
EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
8.9.2009 |
|
|
|
CEN |
EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
8.9.2009 |
|
|
|
CEN |
EN 626-2:1996+A1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures |
8.9.2009 |
|
|
|
CEN |
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing |
8.9.2009 |
|
|
|
CEN |
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
8.9.2009 |
|
|
|
CEN |
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
8.9.2009 |
|
|
|
CEN |
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
8.9.2009 |
|
|
|
CEN |
EN 894-4:2010 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators |
20.10.2010 |
|
|
|
CEN |
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
8.9.2009 |
|
|
|
CEN |
EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals |
8.9.2009 |
|
|
|
CEN |
EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions |
8.9.2009 |
|
|
|
CEN |
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
8.9.2009 |
|
|
|
CEN |
EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
8.9.2009 |
|
|
|
CEN |
EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
8.9.2009 |
|
|
|
CEN |
EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
8.9.2009 |
|
|
|
CEN |
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up |
8.9.2009 |
|
|
|
CEN |
EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
8.9.2009 |
|
|
|
CEN |
EN 1093-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods |
8.9.2009 |
|
|
|
CEN |
EN 1093-2:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant |
8.9.2009 |
|
|
|
CEN |
EN 1093-3:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
8.9.2009 |
|
|
|
CEN |
EN 1093-4:1996+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method |
8.9.2009 |
|
|
|
CEN |
EN 1093-6:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
8.9.2009 |
|
|
|
CEN |
EN 1093-7:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
8.9.2009 |
|
|
|
CEN |
EN 1093-8:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method |
8.9.2009 |
|
|
|
CEN |
EN 1093-9:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method |
8.9.2009 |
|
|
|
CEN |
EN 1093-11:2001+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index |
8.9.2009 |
|
|
|
CEN |
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
18.11.2011 |
EN 1127-1:2007 Note 2.1 |
31.7.2014 |
|
CEN |
EN 1299:1997+A1:2008 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
8.9.2009 |
|
|
|
CEN |
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines |
18.12.2009 |
|
|
|
CEN |
EN ISO 3741:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
8.4.2011 |
EN ISO 3741:2009 Note 2.1 |
Date expired (30.4.2011) |
|
CEN |
EN ISO 3743-1:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
8.4.2011 |
EN ISO 3743-1:2009 Note 2.1 |
Date expired (30.4.2011) |
|
CEN |
EN ISO 3743-2:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
18.12.2009 |
|
|
|
CEN |
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
8.4.2011 |
EN ISO 3744:2009 Note 2.1 |
Date expired (30.4.2011) |
|
CEN |
EN ISO 3745:2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012) |
5.6.2012 |
EN ISO 3745:2009 Note 2.1 |
Date expired (30.9.2012) |
|
CEN |
EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
8.4.2011 |
EN ISO 3746:2009 Note 2.1 |
Date expired (30.6.2011) |
|
CEN |
EN ISO 3747:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
8.4.2011 |
EN ISO 3747:2009 Note 2.1 |
Date expired (30.6.2011) |
|
CEN |
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
8.4.2011 |
EN 982:1996+A1:2008 Note 2.1 |
Date expired (30.11.2011) |
|
CEN |
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
8.4.2011 |
EN 983:1996+A1:2008 Note 2.1 |
Date expired (30.11.2011) |
|
CEN |
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
18.12.2009 |
|
|
|
CEN |
EN ISO 5136:2009 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
18.12.2009 |
|
|
|
CEN |
EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
18.12.2009 |
|
|
|
CEN |
EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
8.9.2009 |
|
|
|
CEN |
EN ISO 9614-1:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
18.12.2009 |
|
|
|
CEN |
EN ISO 9614-3:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11145:2008 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11161:2007 Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007) |
26.5.2010 |
|
|
|
EN ISO 11161:2007/A1:2010 |
26.5.2010 |
Note 3 |
Date expired (30.9.2010) |
|
|
CEN |
EN ISO 11200:2009 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
20.10.2010 |
EN ISO 11201:2009 Note 2.1 |
Date expired (30.11.2010) |
|
CEN |
EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
20.10.2010 |
EN ISO 11202:2009 Note 2.1 |
Date expired (30.11.2010) |
|
CEN |
EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
20.10.2010 |
EN ISO 11204:2009 Note 2.1 |
Date expired (30.11.2010) |
|
CEN |
EN ISO 11205:2009 Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11553-1:2008 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11553-2:2008 Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11553-3:2013 Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11691:2009 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11957:2009 Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
18.12.2009 |
|
|
|
CEN |
EN 12198-1:2000+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
8.9.2009 |
|
|
|
CEN |
EN 12198-2:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure |
8.9.2009 |
|
|
|
CEN |
EN 12198-3:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
8.9.2009 |
|
|
|
CEN |
EN 12254:2010 Screens for laser working places - Safety requirements and testing |
26.5.2010 |
EN 12254:1998+A2:2008 Note 2.1 |
Date expired (30.9.2010) |
|
EN 12254:2010/AC:2011 |
|
|
|
|
|
CEN |
EN 12786:2013 Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards |
28.11.2013 |
|
|
|
CEN |
EN 13478:2001+A1:2008 Safety of machinery - Fire prevention and protection |
8.9.2009 |
|
|
|
CEN |
EN 13490:2001+A1:2008 Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration |
8.9.2009 |
|
|
|
CEN |
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) |
8.9.2009 |
|
|
|
CEN |
EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006) |
8.9.2009 |
EN ISO 13849-1:2006 EN 954-1:1996 Note 2.1 |
Date expired (31.12.2011) |
|
EN ISO 13849-1:2008/AC:2009 |
|
|
|
|
|
CEN |
EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
5.4.2013 |
EN ISO 13849-2:2008 Note 2.1 |
Date expired (30.4.2013) |
|
CEN |
EN ISO 13850:2008 Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006) |
8.9.2009 |
|
|
|
CEN |
EN ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
20.10.2010 |
EN 999:1998+A1:2008 Note 2.1 |
Date expired (30.11.2010) |
|
CEN |
EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
28.11.2013 |
EN 1760-1:1997+A1:2009 Note 2.1 |
|
|
CEN |
EN ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) |
28.11.2013 |
EN 1760-2:2001+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
|
CEN |
EN ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) |
28.11.2013 |
EN 1760-3:2004+A1:2009 Note 2.1 |
31.1.2014 |
|
CEN |
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 14122-1:2001 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001) |
20.10.2010 |
|
|
|
EN ISO 14122-1:2001/A1:2010 |
20.10.2010 |
Note 3 |
Date expired (31.10.2010) |
|
|
CEN |
EN ISO 14122-2:2001 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001) |
20.10.2010 |
|
|
|
EN ISO 14122-2:2001/A1:2010 |
20.10.2010 |
Note 3 |
Date expired (31.10.2010) |
|
|
CEN |
EN ISO 14122-3:2001 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001) |
20.10.2010 |
|
|
|
EN ISO 14122-3:2001/A1:2010 |
20.10.2010 |
Note 3 |
Date expired (31.10.2010) |
|
|
CEN |
EN ISO 14122-4:2004 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004) |
8.4.2011 |
|
|
|
EN ISO 14122-4:2004/A1:2010 |
8.4.2011 |
Note 3 |
Date expired (8.4.2011) |
|
|
CEN |
EN ISO 14159:2008 Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002) |
8.9.2009 |
|
|
|
CEN |
EN ISO 14738:2008 Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 15536-1:2008 Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005) |
8.9.2009 |
|
|
|
CEN |
EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
18.11.2011 |
|
|
|
CEN |
EN ISO 16231-1:2013 Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 20643:2008 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005) |
8.9.2009 |
|
|
|
EN ISO 20643:2008/A1:2012 |
15.11.2012 |
Note 3 |
Date expired (31.1.2013) |
|
|
CEN |
EN 30326-1:1994 Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992) |
8.9.2009 |
|
|
|
EN 30326-1:1994/A1:2007 |
8.9.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
EN 30326-1:1994/A2:2011 |
29.2.2012 |
Note 3 |
Date expired (30.6.2012) |
|
|
C-type standards C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer’s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard. |
||||
|
CEN |
EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts |
8.9.2009 |
|
|
|
EN 81-3:2000+A1:2008/AC:2009 |
|
|
|
|
|
CEN |
EN 81-31:2010 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
20.10.2010 |
|
|
|
CEN |
EN 81-40:2008 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
8.9.2009 |
|
|
|
CEN |
EN 81-41:2010 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
8.4.2011 |
|
|
|
CEN |
EN 81-43:2009 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
8.9.2009 |
|
|
|
CEN |
EN 115-1:2008+A1:2010 Safety of escalators and moving walks - Part 1: Construction and installation |
26.5.2010 |
EN 115-1:2008 Note 2.1 |
Date expired (30.9.2010) |
|
CEN |
EN 201:2009 Plastics and rubber machines - Injection moulding machines - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels |
18.11.2011 |
EN 267:2009 Note 2.1 |
Date expired (29.2.2012) |
|
CEN |
EN 280:2013 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
28.11.2013 |
EN 280:2001+A2:2009 Note 2.1 |
31.1.2015 |
|
CEN |
EN 289:2004+A1:2008 Plastics and rubber machines - Presses - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
24.8.2012 |
|
|
|
CEN |
EN 378-2:2008+A2:2012 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
24.8.2012 |
EN 378-2:2008+A1:2009 Note 2.1 |
Date expired (30.11.2012) |
|
CEN |
EN 415-1:2000+A1:2009 Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment |
8.9.2009 |
|
|
|
CEN |
EN 415-3:1999+A1:2009 Safety of packaging machines - Part 3: Form, fill and seal machines |
18.12.2009 |
|
|
|
CEN |
EN 415-5:2006+A1:2009 Safety of packaging machines - Part 5: Wrapping machines |
18.12.2009 |
|
|
|
CEN |
EN 415-6:2013 Safety of packaging machines - Part 6: Pallet wrapping machines |
28.11.2013 |
EN 415-6:2006+A1:2009 Note 2.1 |
30.11.2013 |
|
CEN |
EN 415-7:2006+A1:2008 Safety of packaging machines - Part 7: Group and secondary packaging machines |
8.9.2009 |
|
|
|
CEN |
EN 415-8:2008 Safety of packaging machines - Part 8: Strapping machines |
8.9.2009 |
|
|
|
CEN |
EN 415-9:2009 Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
18.12.2009 |
|
|
|
CEN |
EN 422:2009 Plastics and rubber machines - Blow moulding machines - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 453:2000+A1:2009 Food processing machinery - Dough mixers - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 454:2000+A1:2009 Food processing machinery - Planetary mixers - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 474-1:2006+A3:2013 Earth-moving machinery - Safety - Part 1: General requirements |
28.11.2013 |
EN 474-1:2006+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
|
CEN |
EN 474-1:2006+A4:2013 Earth-moving machinery - Safety - Part 1: General requirements |
28.11.2013 |
|
|
|
CEN |
EN 474-2:2006+A1:2008 Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers |
8.9.2009 |
|
|
|
CEN |
EN 474-3:2006+A1:2009 Earth-moving machinery - Safety - Part 3: Requirements for loaders |
8.9.2009 |
|
|
|
CEN |
EN 474-4:2006+A2:2012 Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders |
23.3.2012 |
|
|
|
CEN |
EN 474-5:2006+A3:2013 Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators |
28.11.2013 |
EN 474-5:2006+A1:2009+A2:2012 Note 2.1 |
31.1.2014 |
|
CEN |
EN 474-6:2006+A1:2009 Earth-moving machinery - Safety - Part 6: Requirements for dumpers |
8.9.2009 |
|
|
|
CEN |
EN 474-7:2006+A1:2009 Earth-moving machinery - Safety - Part 7: Requirements for scrapers |
8.9.2009 |
|
|
|
CEN |
EN 474-8:2006+A1:2009 Earth-moving machinery - Safety - Part 8: Requirements for graders |
8.9.2009 |
|
|
|
CEN |
EN 474-9:2006+A1:2009 Earth-moving machinery - Safety - Part 9: Requirements for pipelayers |
8.9.2009 |
|
|
|
CEN |
EN 474-10:2006+A1:2009 Earth-moving machinery - Safety - Part 10: Requirements for trenchers |
8.9.2009 |
|
|
|
CEN |
EN 474-11:2006+A1:2008 Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors |
8.9.2009 |
|
|
|
CEN |
EN 474-12:2006+A1:2008 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators |
8.9.2009 |
|
|
|
CEN |
EN 500-1:2006+A1:2009 Mobile road construction machinery - Safety - Part 1: Common requirements |
26.5.2010 |
|
|
|
CEN |
EN 500-2:2006+A1:2008 Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines |
8.9.2009 |
|
|
|
CEN |
EN 500-3:2006+A1:2008 Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines |
8.9.2009 |
|
|
|
CEN |
EN 500-4:2011 Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines |
20.7.2011 |
EN 500-4:2006+A1:2009 Note 2.1 |
Date expired (31.8.2011) |
|
CEN |
EN 500-6:2006+A1:2008 Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers |
8.9.2009 |
|
|
|
CEN |
EN 528:2008 Rail dependent storage and retrieval equipment - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 609-1:1999+A2:2009 Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
18.12.2009 |
|
|
|
CEN |
EN 609-2:1999+A1:2009 Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters |
18.12.2009 |
|
|
|
CEN |
EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
8.4.2011 |
|
|
|
CEN |
EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
8.4.2011 |
|
|
|
CEN |
EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
8.4.2011 |
|
|
|
CEN |
EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
8.4.2011 |
|
|
|
CEN |
EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels |
8.9.2009 |
|
|
|
EN 676:2003+A2:2008/AC:2008 |
|
|
|
|
|
CEN |
EN 690:1994+A1:2009 Agricultural machinery - Manure spreaders - Safety |
18.12.2009 |
|
|
|
CEN |
EN 692:2005+A1:2009 Machine tools - Mechanical presses - Safety |
8.9.2009 |
|
|
|
CEN |
EN 693:2001+A2:2011 Machine tools - Safety - Hydraulic presses |
18.11.2011 |
EN 693:2001+A1:2009 Note 2.1 |
Date expired (31.3.2012) |
|
CEN |
EN 703:2004+A1:2009 Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety |
18.12.2009 |
|
|
|
CEN |
EN 706:1996+A1:2009 Agricultural machinery - Vine shoot tipping machines - Safety |
18.12.2009 |
|
|
|
CEN |
EN 707:1999+A1:2009 Agricultural machinery - Slurry tankers - Safety |
18.12.2009 |
|
|
|
CEN |
EN 709:1997+A4:2009 Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety |
26.5.2010 |
EN 709:1997+A2:2009 Note 2.1 |
Date expired (31.12.2010) |
|
EN 709:1997+A4:2009/AC:2012 |
|
|
|
|
|
CEN |
EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment |
20.10.2010 |
|
|
|
EN 710:1997+A1:2010/AC:2012 |
|
|
|
|
|
CEN |
EN 741:2000+A1:2010 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
8.4.2011 |
|
|
|
CEN |
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
18.12.2009 |
|
|
|
CEN |
EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
20.10.2010 |
|
|
|
CEN |
EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases |
8.9.2009 |
|
|
|
CEN |
EN 786:1996+A2:2009 Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety |
18.12.2009 |
|
|
|
CEN |
EN 791:1995+A1:2009 Drill rigs - Safety |
8.9.2009 |
|
|
|
CEN |
EN 792-13:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools |
8.9.2009 |
|
|
|
CEN |
EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements |
18.12.2009 |
|
|
|
EN 809:1998+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 818-1:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
8.9.2009 |
|
|
|
CEN |
EN 818-2:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 818-3:1999+A1:2008 Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 818-4:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 818-5:1999+A1:2008 Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 818-6:2000+A1:2008 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
8.9.2009 |
|
|
|
CEN |
EN 818-7:2002+A1:2008 Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
8.9.2009 |
|
|
|
CEN |
EN 848-1:2007+A2:2012 Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
15.11.2012 |
EN 848-1:2007+A1:2009 Note 2.1 |
Date expired (31.3.2013) |
|
CEN |
EN 848-2:2007+A2:2012 Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
15.11.2012 |
EN 848-2:2007+A1:2009 Note 2.1 |
Date expired (31.3.2013) |
|
CEN |
EN 848-3:2012 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
5.4.2013 |
EN 848-3:2007+A2:2009 Note 2.1 |
Date expired (30.4.2013) |
|
CEN |
EN 859:2007+A2:2012 Safety of woodworking machines - Hand fed surface planing machines |
24.8.2012 |
EN 859:2007+A1:2009 Note 2.1 |
Date expired (31.12.2012) |
|
CEN |
EN 860:2007+A2:2012 Safety of woodworking machines - One side thickness planing machines |
24.8.2012 |
EN 860:2007+A1:2009 Note 2.1 |
Date expired (31.12.2012) |
|
CEN |
EN 861:2007+A2:2012 Safety of woodworking machines - Surface planing and thicknessing machines |
24.8.2012 |
EN 861:2007+A1:2009 Note 2.1 |
Date expired (31.12.2012) |
|
CEN |
EN 869:2006+A1:2009 Safety of machinery - Safety requirements for pressure metal diecasting units |
8.9.2009 |
|
|
|
CEN |
EN 908:1999+A1:2009 Agricultural and forestry machinery - Reel machines for irrigation - Safety |
18.12.2009 |
|
|
|
CEN |
EN 909:1998+A1:2009 Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety |
18.12.2009 |
|
|
|
CEN |
EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 931:1997+A2:2009 Footwear manufacturing machines - Lasting machines - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 940:2009+A1:2012 Safety of woodworking machines - Combined woodworking machines |
5.6.2012 |
EN 940:2009 Note 2.1 |
Date expired (31.8.2012) |
|
CEN |
EN 972:1998+A1:2010 Tannery machines - Reciprocating roller machines - Safety requirements |
8.4.2011 |
|
|
|
EN 972:1998+A1:2010/AC:2011 |
|
|
|
|
|
CEN |
EN 996:1995+A3:2009 Piling equipment - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
8.4.2011 |
|
|
|
CEN |
EN 1010-2:2006+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
8.4.2011 |
|
|
|
CEN |
EN 1010-3:2002+A1:2009 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines |
18.12.2009 |
|
|
|
CEN |
EN 1010-4:2004+A1:2009 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
18.12.2009 |
|
|
|
CEN |
EN 1012-1:2010 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
8.4.2011 |
|
|
|
CEN |
EN 1012-2:1996+A1:2009 Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
18.12.2009 |
|
|
|
CEN |
EN 1028-1:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1028-2:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1034-1:2000+A1:2010 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
26.5.2010 |
|
|
|
CEN |
EN 1034-2:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums |
26.5.2010 |
|
|
|
CEN |
EN 1034-3:2011 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
29.2.2012 |
EN 1034-3:1999+A1:2009 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN 1034-4:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities |
26.5.2010 |
|
|
|
CEN |
EN 1034-5:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
26.5.2010 |
|
|
|
CEN |
EN 1034-6:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender |
26.5.2010 |
|
|
|
CEN |
EN 1034-7:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests |
26.5.2010 |
|
|
|
CEN |
EN 1034-8:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants |
5.6.2012 |
|
|
|
CEN |
EN 1034-13:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units |
26.5.2010 |
|
|
|
CEN |
EN 1034-14:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter |
26.5.2010 |
|
|
|
CEN |
EN 1034-16:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines |
5.6.2012 |
|
|
|
CEN |
EN 1034-17:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
15.11.2012 |
|
|
|
CEN |
EN 1034-21:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines |
15.11.2012 |
|
|
|
CEN |
EN 1034-22:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders |
26.5.2010 |
|
|
|
CEN |
EN 1034-26:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines |
24.8.2012 |
|
|
|
CEN |
EN 1034-27:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems |
15.11.2012 |
|
|
|
CEN |
EN 1114-1:2011 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
29.2.2012 |
|
|
|
CEN |
EN 1114-3:2001+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs |
8.9.2009 |
|
|
|
CEN |
EN 1127-2:2002+A1:2008 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
8.9.2009 |
|
|
|
CEN |
EN 1175-1:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
8.4.2011 |
|
|
|
CEN |
EN 1175-2:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
8.4.2011 |
|
|
|
CEN |
EN 1175-3:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
8.4.2011 |
|
|
|
CEN |
EN 1218-1:1999+A1:2009 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table |
18.12.2009 |
|
|
|
CEN |
EN 1218-2:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
8.9.2009 |
|
|
|
CEN |
EN 1218-3:2001+A1:2009 Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers |
8.9.2009 |
|
|
|
CEN |
EN 1218-4:2004+A2:2009 Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) |
8.9.2009 |
|
|
|
CEN |
EN 1218-5:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain |
18.12.2009 |
|
|
|
CEN |
EN 1247:2004+A1:2010 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
8.4.2011 |
|
|
|
CEN |
EN 1248:2001+A1:2009 Foundry machinery - Safety requirements for abrasive blasting equipment |
8.9.2009 |
|
|
|
CEN |
EN 1265:1999+A1:2008 Safety of machinery - Noise test code for foundry machines and equipment |
8.9.2009 |
|
|
|
CEN |
EN 1374:2000+A1:2010 Agricultural machinery - Silos stationary unloaders for round silos - Safety |
20.10.2010 |
|
|
|
CEN |
EN 1398:2009 Dock levellers - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1417:1996+A1:2008 Plastics and rubber machines - Two roll mills - Safety requirements |
8.9.2009 |
|
|
|
EN 1417:1996+A1:2008/AC:2009 |
|
|
|
|
|
CEN |
EN 1459:1998+A3:2012 Safety of industrial trucks - Self-propelled variable reach trucks |
23.3.2012 |
|
|
|
CEN |
EN 1492-1:2000+A1:2008 Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use |
8.9.2009 |
|
|
|
CEN |
EN 1492-2:2000+A1:2008 Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use |
8.9.2009 |
|
|
|
CEN |
EN 1492-4:2004+A1:2008 Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
8.9.2009 |
|
|
|
CEN |
EN 1493:2010 Vehicle lifts |
8.4.2011 |
EN 1493:1998+A1:2008 Note 2.1 |
Date expired (4.8.2011) |
|
CEN |
EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment |
8.9.2009 |
|
|
|
CEN |
EN 1495:1997+A2:2009 Lifting platforms - Mast climbing work platforms |
18.12.2009 |
|
|
|
EN 1495:1997+A2:2009/AC:2010 |
|
|
|
|
|
Warning: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC. |
||||
|
CEN |
EN 1501-1:2011 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
18.11.2011 |
EN 1501-1:1998+A2:2009 Note 2.1 |
Date expired (29.2.2012) |
|
CEN |
EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
29.12.2009 |
|
|
|
CEN |
EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
8.9.2009 |
|
|
|
CEN |
EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles |
8.9.2009 |
|
|
|
CEN |
EN 1501-5:2011 Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
18.11.2011 |
EN 1501-1:1998+A2:2009 Note 2.1 |
Date expired (29.2.2012) |
|
CEN |
EN 1526:1997+A1:2008 Safety of industrial trucks - Additional requirements for automated functions on trucks |
8.9.2009 |
|
|
|
CEN |
EN 1539:2009 Dryers and ovens, in which flammable substances are released - Safety requirements |
26.5.2010 |
|
|
|
CEN |
EN 1547:2001+A1:2009 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
8.9.2009 |
|
|
|
CEN |
EN 1550:1997+A1:2008 Machine-tools safety - Safety requirements for the design and construction of work holding chucks |
8.9.2009 |
|
|
|
CEN |
EN 1554:2012 Conveyor belts - Drum friction testing |
24.8.2012 |
|
|
|
CEN |
EN 1570-1:2011 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
29.2.2012 |
EN 1570:1998+A2:2009 Note 2.1 |
Date expired (30.4.2012) |
|
CEN |
EN 1612-1:1997+A1:2008 Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units |
8.9.2009 |
|
|
|
CEN |
EN 1672-2:2005+A1:2009 Food processing machinery - Basic concepts - Part 2: Hygiene requirements |
8.9.2009 |
|
|
|
CEN |
EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 1674:2000+A1:2009 Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 1677-1:2000+A1:2008 Components for slings - Safety - Part 1: Forged steel components, Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-2:2000+A1:2008 Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-3:2001+A1:2008 Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-4:2000+A1:2008 Components for slings - Safety - Part 4: Links, Grade 8 |
8.9.2009 |
|
|
|
CEN |
EN 1677-5:2001+A1:2008 Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 1677-6:2001+A1:2008 Components for slings - Safety - Part 6: Links - Grade 4 |
8.9.2009 |
|
|
|
CEN |
EN 1678:1998+A1:2010 Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 1679-1:1998+A1:2011 Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines |
20.7.2011 |
|
|
|
CEN |
EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines |
8.9.2009 |
|
|
|
EN 1710:2005+A1:2008/AC:2010 |
|
|
|
|
|
CEN |
EN 1755:2000+A2:2013 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust |
28.11.2013 |
EN 1755:2000+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
|
CEN |
EN 1756-1:2001+A1:2008 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods |
8.9.2009 |
|
|
|
CEN |
EN 1756-2:2004+A1:2009 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers |
18.12.2009 |
|
|
|
CEN |
EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
26.5.2010 |
EN 1777:2004+A1:2009 Note 2.1 |
Date expired (30.9.2010) |
|
CEN |
EN 1804-1:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements |
26.5.2010 |
|
|
|
CEN |
EN 1804-2:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams |
26.5.2010 |
|
|
|
CEN |
EN 1804-3:2006+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
26.5.2010 |
|
|
|
CEN |
EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
28.11.2013 |
EN 1807:1999+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
|
CEN |
EN 1807-2:2013 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
28.11.2013 |
EN 1807:1999+A1:2009 Note 2.1 |
|
|
CEN |
EN 1808:1999+A1:2010 Safety requirements on Suspended Access Equipment - Design calculations, stability criteria, construction - Tests |
20.10.2010 |
|
|
|
CEN |
EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines |
26.5.2010 |
|
|
|
CEN |
EN 1829-2:2008 High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors |
8.9.2009 |
|
|
|
EN 1829-2:2008/AC:2011 |
|
|
|
|
|
CEN |
EN 1845:2007 Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 1846-2:2009+A1:2013 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
28.11.2013 |
EN 1846-2:2009 Note 2.1 |
Date expired (28.11.2013) |
|
CEN |
EN 1846-3:2013 Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance |
28.11.2013 |
EN 1846-3:2002+A1:2008 Note 2.1 |
31.1.2014 |
|
CEN |
EN 1853:1999+A1:2009 Agricultural machinery - Trailers with tipping body - Safety |
18.12.2009 |
|
|
|
CEN |
EN 1870-3:2001+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
8.9.2009 |
|
|
|
CEN |
EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
5.6.2012 |
EN 1870-4:2001+A1:2009 Note 2.1 |
Date expired (30.9.2012) |
|
CEN |
EN 1870-5:2002+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines |
15.11.2012 |
EN 1870-5:2002+A1:2009 Note 2.1 |
Date expired (31.3.2013) |
|
CEN |
EN 1870-6:2002+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading |
18.12.2009 |
|
|
|
CEN |
EN 1870-7:2012 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
5.4.2013 |
EN 1870-7:2002+A1:2009 Note 2.1 |
Date expired (30.4.2013) |
|
CEN |
EN 1870-8:2012 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
5.4.2013 |
EN 1870-8:2001+A1:2009 Note 2.1 |
Date expired (31.5.2013) |
|
CEN |
EN 1870-9:2012 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
15.11.2012 |
EN 1870-9:2000+A1:2009 Note 2.1 |
Date expired (31.3.2013) |
|
CEN |
EN 1870-10:2013 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
28.11.2013 |
EN 1870-10:2003+A1:2009 Note 2.1 |
30.11.2013 |
|
CEN |
EN 1870-11:2003+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
18.12.2009 |
|
|
|
CEN |
EN 1870-12:2003+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
18.12.2009 |
|
|
|
CEN |
EN 1870-13:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
5.6.2012 |
EN 1870-13:2007+A1:2009 Note 2.1 |
Date expired (30.9.2012) |
|
CEN |
EN 1870-14:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
5.6.2012 |
EN 1870-14:2007+A1:2009 Note 2.1 |
Date expired (30.9.2012) |
|
CEN |
EN 1870-15:2012 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
5.4.2013 |
EN 1870-15:2004+A1:2009 Note 2.1 |
Date expired (30.4.2013) |
|
CEN |
EN 1870-16:2012 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
5.4.2013 |
EN 1870-16:2005+A1:2009 Note 2.1 |
Date expired (30.4.2013) |
|
CEN |
EN 1870-17:2007+A2:2009 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) |
18.12.2009 |
|
|
|
CEN |
EN 1870-18:2013 Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
28.11.2013 |
EN 1870-1:2007+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
|
CEN |
EN 1889-1:2011 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
18.11.2011 |
|
|
|
CEN |
EN 1889-2:2003+A1:2009 Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives |
8.9.2009 |
|
|
|
CEN |
EN 1915-1:2013 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
28.11.2013 |
EN 1915-1:2001+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
|
CEN |
EN 1915-2:2001+A1:2009 Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods |
8.9.2009 |
|
|
|
CEN |
EN 1915-3:2004+A1:2009 Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
8.9.2009 |
|
|
|
CEN |
EN 1915-4:2004+A1:2009 Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction |
8.9.2009 |
|
|
|
CEN |
EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements |
28.11.2013 |
EN 1953:1998+A1:2009 Note 2.1 |
31.3.2014 |
|
CEN |
EN 1974:1998+A1:2009 Food processing machinery - Slicing machines - Safety and hygiene requirements |
18.12.2009 |
|
|
|
CEN |
EN ISO 2151:2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004) |
8.9.2009 |
|
|
|
CEN |
EN ISO 2860:2008 Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) |
8.9.2009 |
|
|
|
CEN |
EN ISO 2867:2011 Earth-moving machinery - Access systems (ISO 2867:2011) |
18.11.2011 |
EN ISO 2867:2008 Note 2.1 |
31.7.2014 |
|
CEN |
EN ISO 3164:2013 Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:2013) |
28.11.2013 |
EN ISO 3164:2008 Note 2.1 |
30.11.2013 |
|
CEN |
EN ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010) |
20.10.2010 |
|
|
|
CEN |
EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3449:2008 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3450:2011 Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011) |
29.2.2012 |
EN ISO 3450:2008 Note 2.1 |
Date expired (31.5.2012) |
|
CEN |
EN ISO 3457:2008 Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3471:2008 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 3691-5:2009 Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2009) |
28.11.2013 |
|
|
|
CEN |
EN ISO 4254-1:2013 Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
28.11.2013 |
EN ISO 4254-1:2009 Note 2.1 |
30.11.2013 |
|
CEN |
EN ISO 4254-5:2009 Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008) |
26.5.2010 |
|
|
|
EN ISO 4254-5:2009/AC:2011 |
|
|
|
|
|
CEN |
EN ISO 4254-6:2009 Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009) |
26.5.2010 |
|
|
|
EN ISO 4254-6:2009/AC:2010 |
|
|
|
|
|
CEN |
EN ISO 4254-7:2009 Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) |
26.5.2010 |
|
|
|
EN ISO 4254-7:2009/AC:2010 |
|
|
|
|
|
CEN |
EN ISO 4254-10:2009 Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009) |
26.5.2010 |
|
|
|
EN ISO 4254-10:2009/AC:2010 |
|
|
|
|
|
CEN |
EN ISO 4254-11:2010 Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) |
8.4.2011 |
EN 704:1999+A1:2009 Note 2.1 |
Date expired (30.6.2011) |
|
CEN |
EN ISO 4254-12:2012 Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012) |
24.8.2012 |
EN 745:1999+A1:2009 Note 2.1 |
Date expired (31.12.2012) |
|
CEN |
EN ISO 5395-1:2013 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013) |
28.11.2013 |
EN 836:1997+A4:2011 Note 2.1 |
30.9.2014 |
|
CEN |
EN ISO 5395-2:2013 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013) |
28.11.2013 |
EN 836:1997+A4:2011 Note 2.1 |
30.9.2014 |
|
CEN |
EN ISO 5395-3:2013 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) |
28.11.2013 |
EN 836:1997+A4:2011 Note 2.1 |
30.9.2014 |
|
CEN |
EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) |
8.9.2009 |
|
|
|
CEN |
EN ISO 6682:2008 Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
8.9.2009 |
|
|
|
CEN |
EN ISO 6683:2008 Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005) |
8.9.2009 |
|
|
|
CEN |
EN ISO 7096:2008 Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000) |
8.9.2009 |
|
|
|
EN ISO 7096:2008/AC:2009 |
|
|
|
|
|
CEN |
EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 8230-2:2008 Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008) |
8.9.2009 |
|
|
|
CEN |
EN ISO 9902-1:2001 Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-1:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-2:2001 Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-2:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-3:2001 Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-3:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-4:2001 Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-4:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-5:2001 Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-5:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-6:2001 Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-6:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 9902-7:2001 Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) |
18.12.2009 |
|
|
|
EN ISO 9902-7:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 10218-1:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011) |
18.11.2011 |
EN ISO 10218-1:2008 Note 2.1 |
Date expired (1.1.2013) |
|
CEN |
EN ISO 10218-2:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
18.11.2011 |
|
|
|
CEN |
EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-4:2008 Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 10517:2009 Powered hand-held hedge trimmers - Safety (ISO 10517:2009) |
18.12.2009 |
|
|
|
EN ISO 10517:2009/A1:2013 |
28.11.2013 |
Note 3 |
30.9.2014 |
|
|
CEN |
EN ISO 10821:2005 Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005) |
18.12.2009 |
|
|
|
EN ISO 10821:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
|
CEN |
EN ISO 11102-1:2009 Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11102-2:2009 Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) |
8.9.2009 |
|
|
|
CEN |
EN ISO 11111-1:2009 Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2009) |
18.12.2009 |
|
|
|
CEN |
EN ISO 11111-2:2005 Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-2:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11111-3:2005 Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-3:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11111-4:2005 Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-4:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11111-5:2005 Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-5:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11111-6:2005 Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-6:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11111-7:2005 Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005) |
18.12.2009 |
|
|
|
EN ISO 11111-7:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
|
CEN |
EN ISO 11148-1:2011 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
24.8.2012 |
EN 792-1:2000+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 11148-2:2011 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011) |
29.2.2012 |
EN 792-2:2000+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 11148-3:2012 Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012) |
5.4.2013 |
EN ISO 11148-3:2010 Note 2.1 |
Date expired (30.6.2013) |
|
CEN |
EN ISO 11148-4:2012 Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) |
5.4.2013 |
EN ISO 11148-4:2010 Note 2.1 |
Date expired (30.6.2013) |
|
CEN |
EN ISO 11148-5:2011 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
29.2.2012 |
EN 792-5:2000+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 11148-6:2012 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) |
5.4.2013 |
EN ISO 11148-6:2010 Note 2.1 |
Date expired (30.6.2013) |
|
CEN |
EN ISO 11148-7:2012 Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012) |
15.11.2012 |
EN 792-7:2001+A1:2008 Note 2.1 |
Date expired (28.2.2013) |
|
CEN |
EN ISO 11148-8:2011 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
29.2.2012 |
EN 792-8:2001+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 11148-9:2011 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
29.2.2012 |
EN 792-9:2001+A1:2008 Note 2.1 |
Date expired (1.6.2012) |
|
CEN |
EN ISO 11148-10:2011 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
29.2.2012 |
EN 792-10:2000+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 11148-11:2011 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
29.2.2012 |
EN 792-11:2000+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 11148-12:2012 Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
5.4.2013 |
EN 792-12:2000+A1:2008 Note 2.1 |
Date expired (30.6.2013) |
|
CEN |
EN ISO 11252:2013 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) |
28.11.2013 |
EN ISO 11252:2008 Note 2.1 |
28.2.2014 |
|
CEN |
EN ISO 11680-1:2011 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) |
29.2.2012 |
EN ISO 11680-1:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 11680-2:2011 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011) |
29.2.2012 |
EN ISO 11680-2:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 11681-1:2011 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) |
29.2.2012 |
EN ISO 11681-1:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 11681-2:2011 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011) |
29.2.2012 |
EN ISO 11681-2:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 11806-1:2011 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) |
29.2.2012 |
EN ISO 11806:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 11806-2:2011 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011) |
29.2.2012 |
|
|
|
CEN |
EN ISO 11850:2011 Machinery for forestry - General safety requirements (ISO 11850:2011) |
29.2.2012 |
EN 14861:2004+A1:2009 Note 2.1 |
Date expired (31.5.2012) |
|
CEN |
EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
15.11.2012 |
EN 12001:2003+A1:2009 Note 2.1 |
Date expired (28.2.2013) |
|
CEN |
EN 12012-1:2007+A1:2008 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators |
8.9.2009 |
|
|
|
CEN |
EN 12012-3:2001+A1:2008 Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders |
8.9.2009 |
|
|
|
CEN |
EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators |
8.9.2009 |
|
|
|
CEN |
EN 12013:2000+A1:2008 Plastics and rubber machines - Internal mixers - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12016:2013 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
28.11.2013 |
EN 12016:2004+A1:2008 Note 2.1 |
28.2.2014 |
|
CEN |
EN 12041:2000+A1:2009 Food processing machinery - Moulders - Safety and hygiene requirements |
18.12.2009 |
|
|
|
CEN |
EN 12042:2005+A1:2010 Food processing machinery - Automatic dividers - Safety and hygiene requirements |
8.4.2011 |
|
|
|
CEN |
EN 12043:2000+A1:2010 Food processing machinery - Intermediate provers - Safety and hygiene requirements |
8.4.2011 |
|
|
|
CEN |
EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12053:2001+A1:2008 Safety of industrial trucks - Test methods for measuring noise emissions |
8.9.2009 |
|
|
|
CEN |
EN 12077-2:1998+A1:2008 Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices |
8.9.2009 |
|
|
|
CEN |
EN 12110:2002+A1:2008 Tunnelling machines - Air locks - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12111:2002+A1:2009 Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12158-1:2000+A1:2010 Builders' hoists for goods - Part 1: Hoists with accessible platforms |
8.4.2011 |
|
|
|
CEN |
EN 12158-2:2000+A1:2010 Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices |
8.4.2011 |
|
|
|
CEN |
EN 12159:2012 Builders hoists for persons and materials with vertically guided cages |
5.4.2013 |
EN 12159:2000+A1:2009 Note 2.1 |
Date expired (31.5.2013) |
|
CEN |
EN 12162:2001+A1:2009 Liquid pumps - Safety requirements - Procedure for hydrostatic testing |
8.9.2009 |
|
|
|
CEN |
EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12267:2003+A1:2010 Food processing machinery - Circular saw machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12268:2003+A1:2010 Food processing machinery - Band saw machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12301:2000+A1:2008 Plastics and rubber machines - Calenders - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12312-1:2013 Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs |
28.11.2013 |
EN 12312-1:2001+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
|
CEN |
EN 12312-2:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles |
8.9.2009 |
|
|
|
CEN |
EN 12312-3:2003+A1:2009 Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles |
8.9.2009 |
|
|
|
CEN |
EN 12312-4:2003+A1:2009 Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
8.9.2009 |
|
|
|
CEN |
EN 12312-5:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-6:2004+A1:2009 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-7:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-8:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms |
8.9.2009 |
|
|
|
CEN |
EN 12312-9:2013 Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders |
28.11.2013 |
EN 12312-9:2005+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
|
CEN |
EN 12312-10:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters |
8.9.2009 |
|
|
|
CEN |
EN 12312-12:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-13:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-14:2006+A1:2009 Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles |
8.9.2009 |
|
|
|
CEN |
EN 12312-15:2006+A1:2009 Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors |
8.9.2009 |
|
|
|
CEN |
EN 12312-16:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-17:2004+A1:2009 Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment |
8.9.2009 |
|
|
|
CEN |
EN 12312-18:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units |
8.9.2009 |
|
|
|
CEN |
EN 12312-19:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
8.9.2009 |
|
|
|
CEN |
EN 12312-20:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units |
8.9.2009 |
|
|
|
CEN |
EN 12321:2003+A1:2009 Underground mining machinery - Specification for the safety requirements of armoured face conveyors |
8.9.2009 |
|
|
|
CEN |
EN 12331:2003+A2:2010 Food processing machinery - Mincing machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12336:2005+A1:2008 Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12348:2000+A1:2009 Core drilling machines on stand - Safety |
8.9.2009 |
|
|
|
CEN |
EN 12355:2003+A1:2010 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12385-1:2002+A1:2008 Steel wire ropes - Safety - Part 1: General requirements |
8.9.2009 |
|
|
|
CEN |
EN 12385-2:2002+A1:2008 Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
8.9.2009 |
|
|
|
CEN |
EN 12385-3:2004+A1:2008 Steel wire ropes - Safety - Part 3: Information for use and maintenance |
8.9.2009 |
|
|
|
CEN |
EN 12385-4:2002+A1:2008 Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications |
8.9.2009 |
|
|
|
CEN |
EN 12385-10:2003+A1:2008 Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications |
8.9.2009 |
|
|
|
CEN |
EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12409:2008+A1:2011 Plastics and rubber machines - Thermoforming machines - Safety requirements |
29.2.2012 |
EN 12409:2008 Note 2.1 |
Date expired (30.4.2012) |
|
CEN |
EN 12417:2001+A2:2009 Machine tools - Safety - Machining centres |
8.9.2009 |
|
|
|
EN 12417:2001+A2:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site - Safety |
8.9.2009 |
|
|
|
CEN |
EN 12463:2004+A1:2011 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
20.7.2011 |
|
|
|
CEN |
EN 12505:2000+A1:2009 Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
18.12.2009 |
|
|
|
CEN |
EN 12525:2000+A2:2010 Agricultural machinery - Front loaders - Safety |
26.5.2010 |
|
|
|
CEN |
EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements |
8.9.2009 |
|
|
|
CEN |
EN 12547:1999+A1:2009 Centrifuges - Common safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12549:1999+A1:2008 Acoustics - Noise test code for fastener driving tools - Engineering method |
8.9.2009 |
|
|
|
CEN |
EN 12581:2005+A1:2010 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12601:2010 Reciprocating internal combustion engine driven generating sets - Safety |
8.4.2011 |
|
|
|
CEN |
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12622:2009 Safety of machine tools - Hydraulic press brakes |
26.5.2010 |
|
|
|
CEN |
EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements |
8.4.2011 |
|
|
|
CEN |
EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-2:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines |
8.4.2011 |
|
|
|
CEN |
EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
8.4.2011 |
|
|
|
CEN |
EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
8.4.2011 |
|
|
|
CEN |
EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) |
8.4.2011 |
|
|
|
CEN |
EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates - Installation and use |
8.9.2009 |
|
|
|
CEN |
EN 12643:1997+A1:2008 Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified) |
8.9.2009 |
|
|
|
CEN |
EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions |
8.9.2009 |
|
|
|
CEN |
EN 12644-2:2000+A1:2008 Cranes - Information for use and testing - Part 2: Marking |
8.9.2009 |
|
|
|
CEN |
EN 12649:2008+A1:2011 Concrete compactors and smoothing machines - Safety |
18.11.2011 |
EN 12649:2008 Note 2.1 |
Date expired (31.1.2012) |
|
CEN |
EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
8.9.2009 |
|
|
|
CEN |
EN 12717:2001+A1:2009 Safety of machine tools - Drilling machines |
8.9.2009 |
|
|
|
CEN |
EN 12733:2001+A1:2009 Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety |
8.9.2009 |
|
|
|
CEN |
EN 12750:2013 Safety of woodworking machines - Four sided moulding machines |
28.11.2013 |
EN 12750:2001+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
|
CEN |
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
20.10.2010 |
|
|
|
CEN |
EN 12779:2004+A1:2009 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements |
18.12.2009 |
|
|
|
CEN |
EN 12851:2005+A1:2010 Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 12852:2001+A1:2010 Food processing machinery - Food processors and blenders - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12853:2001+A1:2010 Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements |
20.10.2010 |
|
|
|
EN 12853:2001+A1:2010/AC:2010 |
|
|
|
|
|
CEN |
EN 12854:2003+A1:2010 Food processing machinery - Beam mixers - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 12855:2003+A1:2010 Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12881-1:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
8.9.2009 |
|
|
|
CEN |
EN 12881-2:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
8.9.2009 |
|
|
|
CEN |
EN 12882:2008 Conveyor belts for general purpose use - Electrical and flammability safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids |
8.9.2009 |
|
|
|
CEN |
EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids |
8.9.2009 |
|
|
|
CEN |
EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents |
8.9.2009 |
|
|
|
CEN |
EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety |
18.12.2009 |
|
|
|
CEN |
EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
18.12.2009 |
|
|
|
CEN |
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 12984:2005+A1:2010 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 12999:2011+A1:2012 Cranes - Loader cranes |
24.8.2012 |
EN 12999:2011 Note 2.1 |
Date expired (31.12.2012) |
|
CEN |
EN 13000:2010 Cranes - Mobile cranes |
26.5.2010 |
|
|
|
EN 13000:2010/AC:2010 |
|
|
|
|
|
CEN |
EN 13001-1:2004+A1:2009 Cranes - General design - Part 1: General principles and requirements |
8.9.2009 |
|
|
|
EN 13001-1:2004+A1:2009/AC:2009 |
|
|
|
|
|
CEN |
EN 13001-2:2011 Crane safety - General design - Part 2: Load actions |
18.11.2011 |
EN 13001-2:2004+A3:2009 Note 2.1 |
Date expired (18.11.2011) |
|
EN 13001-2:2011/AC:2012 |
|
|
|
|
|
CEN |
EN 13001-3-1:2012+A1:2013 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure |
28.11.2013 |
EN 13001-3-1:2012 Note 2.1 |
31.1.2014 |
|
CEN |
EN 13015:2001+A1:2008 Maintenance for lifts and escalators - Rules for maintenance instructions |
8.9.2009 |
|
|
|
CEN |
EN 13019:2001+A1:2008 Machines for road surface cleaning - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13020:2004+A1:2010 Road surface treatment machines - Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 13021:2003+A1:2008 Winter service machines - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
26.5.2010 |
|
|
|
CEN |
EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory |
8.9.2009 |
|
|
|
CEN |
EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory |
8.9.2009 |
|
|
|
CEN |
EN 13035-3:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines |
18.12.2009 |
|
|
|
EN 13035-3:2003+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables |
26.5.2010 |
|
|
|
CEN |
EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking |
26.5.2010 |
|
|
|
CEN |
EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out |
26.5.2010 |
|
|
|
CEN |
EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass |
26.5.2010 |
|
|
|
CEN |
EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations |
26.5.2010 |
|
|
|
CEN |
EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines |
26.5.2010 |
|
|
|
CEN |
EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder |
18.12.2009 |
|
|
|
CEN |
EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding |
18.12.2009 |
|
|
|
CEN |
EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines |
18.12.2009 |
|
|
|
CEN |
EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses |
18.12.2009 |
|
|
|
CEN |
EN 13059:2002+A1:2008 Safety of industrial trucks - Test methods for measuring vibration |
8.9.2009 |
|
|
|
CEN |
EN 13102:2005+A1:2008 Ceramic machines - Safety - Loading and unloading of fine clay tiles |
8.9.2009 |
|
|
|
CEN |
EN 13112:2002+A1:2009 Tannery machines - Splitting and bandknife shearing machines - Safety requirements |
26.5.2010 |
|
|
|
CEN |
EN 13113:2002+A1:2010 Tannery machines - Roller coating machines - Safety requirements |
8.4.2011 |
|
|
|
CEN |
EN 13114:2002+A1:2009 Tannery machines - Rotating process vessels - Safety requirements |
26.5.2010 |
|
|
|
CEN |
EN 13118:2000+A1:2009 Agricultural machinery - Potato harvesting equipment - Safety |
18.12.2009 |
|
|
|
CEN |
EN 13120:2009 Internal blinds - Performance requirements including safety |
8.9.2009 |
|
|
|
CEN |
EN 13128:2001+A2:2009 Safety of machine tools - Milling machines (including boring machines) |
8.9.2009 |
|
|
|
EN 13128:2001+A2:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 13135:2013 Cranes - Safety - Design - Requirements for equipment |
28.11.2013 |
EN 13135-2:2004+A1:2010 EN 13135-1:2003+A1:2010 Note 2.1 |
28.11.2013 |
|
CEN |
EN 13140:2000+A1:2009 Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety |
18.12.2009 |
|
|
|
CEN |
EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments |
8.9.2009 |
|
|
|
CEN |
EN 13157:2004+A1:2009 Cranes - Safety - Hand powered cranes |
18.12.2009 |
|
|
|
CEN |
EN 13204:2004+A1:2012 Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
24.8.2012 |
|
|
|
CEN |
EN 13208:2003+A1:2010 Food processing machinery - Vegetable peelers - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13218:2002+A1:2008 Machine tools - Safety - Stationary grinding machines |
8.9.2009 |
|
|
|
EN 13218:2002+A1:2008/AC:2010 |
|
|
|
|
|
CEN |
EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
18.11.2011 |
|
|
|
CEN |
EN 13288:2005+A1:2009 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13289:2001+A1:2013 Pasta processing plants - Dryers and coolers - Safety and hygiene requirements |
28.11.2013 |
|
|
|
CEN |
EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13367:2005+A1:2008 Ceramic machines - Safety - Transfer platforms and cars |
8.9.2009 |
|
|
|
EN 13367:2005+A1:2008/AC:2009 |
|
|
|
|
|
CEN |
EN 13378:2001+A1:2013 Pasta processing plants - Pasta presses - Safety and hygiene requirements |
28.11.2013 |
|
|
|
CEN |
EN 13379:2001+A1:2013 Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements |
28.11.2013 |
|
|
|
CEN |
EN 13389:2005+A1:2009 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13390:2002+A1:2009 Food processing machinery - Pie and tart machines - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13411-1:2002+A1:2008 Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
8.9.2009 |
|
|
|
CEN |
EN 13411-2:2001+A1:2008 Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings |
8.9.2009 |
|
|
|
CEN |
EN 13411-3:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
8.9.2009 |
|
|
|
CEN |
EN 13411-4:2011 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
20.7.2011 |
EN 13411-4:2002+A1:2008 Note 2.1 |
Date expired (30.9.2011) |
|
CEN |
EN 13411-5:2003+A1:2008 Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
8.9.2009 |
|
|
|
CEN |
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
8.9.2009 |
|
|
|
CEN |
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
8.9.2009 |
|
|
|
CEN |
EN 13411-8:2011 Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging |
18.11.2011 |
|
|
|
CEN |
EN 13414-1:2003+A2:2008 Steel wire rope slings - Safety - Part 1: Slings for general lifting service |
8.9.2009 |
|
|
|
CEN |
EN 13414-2:2003+A2:2008 Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
8.9.2009 |
|
|
|
CEN |
EN 13414-3:2003+A1:2008 Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings |
8.9.2009 |
|
|
|
CEN |
EN 13418:2013 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
28.11.2013 |
EN 13418:2004+A1:2008 Note 2.1 |
30.11.2013 |
|
CEN |
EN 13448:2001+A1:2009 Agricultural and forestry machinery - Inter-row mowing units - Safety |
18.12.2009 |
|
|
|
CEN |
EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements |
20.10.2010 |
|
|
|
CEN |
EN 13524:2003+A1:2009 Highway maintenance machines - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 13525:2005+A2:2009 Forestry machinery - Wood chippers - Safety |
18.12.2009 |
|
|
|
CEN |
EN 13531:2001+A1:2008 Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified) |
8.9.2009 |
|
|
|
CEN |
EN 13534:2006+A1:2010 Food processing machinery - Curing injection machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13557:2003+A2:2008 Cranes - Controls and control stations |
8.9.2009 |
|
|
|
CEN |
EN 13561:2004+A1:2008 External blinds - Performance requirements including safety |
8.9.2009 |
|
|
|
CEN |
EN 13570:2005+A1:2010 Food processing machinery - Mixing machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13586:2004+A1:2008 Cranes - Access |
8.9.2009 |
|
|
|
CEN |
EN 13591:2005+A1:2009 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
24.8.2012 |
EN 13617-1:2004+A1:2009 Note 2.1 |
Date expired (30.11.2012) |
|
CEN |
EN 13621:2004+A1:2010 Food processing machinery - Salad dryers - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13659:2004+A1:2008 Shutters - Performance requirements including safety |
8.9.2009 |
|
|
|
CEN |
EN 13675:2004+A1:2010 Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
20.10.2010 |
|
|
|
CEN |
EN 13683:2003+A2:2011 Garden equipment - Integrally powered shredders/chippers - Safety |
20.7.2011 |
|
|
|
EN 13683:2003+A2:2011/AC:2013 |
|
|
|
|
|
CEN |
EN 13684:2004+A3:2009 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
26.5.2010 |
EN 13684:2004+A2:2009 Note 2.1 |
Date expired (30.6.2010) |
|
CEN |
EN 13731:2007 Lifting bag systems for fire and rescue service use - Safety and performance requirements |
8.9.2009 |
|
|
|
CEN |
EN 13732:2013 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene |
28.11.2013 |
EN 13732:2002+A2:2009 Note 2.1 |
31.1.2014 |
|
CEN |
EN 13736:2003+A1:2009 Safety of machine tools - Pneumatic presses |
8.9.2009 |
|
|
|
CEN |
EN 13852-1:2013 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
28.11.2013 |
|
|
|
CEN |
EN 13862:2001+A1:2009 Floor cutting-off machines - Safety |
8.9.2009 |
|
|
|
CEN |
EN 13870:2005+A1:2010 Food processing machinery - Chop cutting machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13871:2005+A1:2010 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13885:2005+A1:2010 Food processing machinery - Clipping machines - Safety and hygiene requirements |
20.10.2010 |
|
|
|
CEN |
EN 13886:2005+A1:2010 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
8.9.2009 |
|
|
|
CEN |
EN 13898:2003+A1:2009 Machine tools - Safety - Sawing machines for cold metal |
8.9.2009 |
|
|
|
EN 13898:2003+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 13951:2012 Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use |
24.8.2012 |
EN 13951:2003+A1:2008 Note 2.1 |
Date expired (31.10.2012) |
|
CEN |
EN 13954:2005+A1:2010 Food processing machinery - Bread slicers - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 13977:2011 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
20.7.2011 |
|
|
|
CEN |
EN 13985:2003+A1:2009 Machine tools - Safety - Guillotine shears |
8.9.2009 |
|
|
|
CEN |
EN 14010:2003+A1:2009 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
18.12.2009 |
|
|
|
CEN |
EN 14017:2005+A2:2009 Agricultural and forestry machinery - Solid fertilizer distributors - Safety |
18.12.2009 |
EN 14017:2005+A1:2008 Note 2.1 |
Date expired (31.1.2010) |
|
CEN |
EN 14018:2005+A1:2009 Agricultural and forestry machinery - Seed drills - Safety |
18.12.2009 |
|
|
|
CEN |
EN 14033-3:2009+A1:2011 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
29.2.2012 |
EN 14033-3:2009 Note 2.1 |
Date expired (30.4.2012) |
|
CEN |
EN 14043:2005+A1:2009 High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
8.9.2009 |
|
|
|
CEN |
EN 14044:2005+A1:2009 High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
8.9.2009 |
|
|
|
CEN |
EN 14070:2003+A1:2009 Safety of machine tools - Transfer and special-purpose machines |
8.9.2009 |
|
|
|
EN 14070:2003+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 14238:2004+A1:2009 Cranes - Manually controlled load manipulating devices |
18.12.2009 |
|
|
|
CEN |
EN ISO 14314:2009 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
18.12.2009 |
|
|
|
CEN |
EN 14439:2006+A2:2009 Cranes - Safety - Tower cranes |
8.9.2009 |
|
|
|
CEN |
EN 14462:2005+A1:2009 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 |
8.9.2009 |
|
|
|
CEN |
EN 14466:2005+A1:2008 Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests |
8.9.2009 |
|
|
|
CEN |
EN 14492-1:2006+A1:2009 Cranes - Power driven winches and hoists - Part 1: Power driven winches |
18.12.2009 |
|
|
|
EN 14492-1:2006+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 14492-2:2006+A1:2009 Cranes - Power driven winches and hoists - Part 2: Power driven hoists |
18.12.2009 |
|
|
|
EN 14492-2:2006+A1:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 14502-2:2005+A1:2008 Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations |
8.9.2009 |
|
|
|
CEN |
EN 14655:2005+A1:2010 Food processing machinery - Baguette slicers - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 14656:2006+A1:2010 Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
20.10.2010 |
|
|
|
CEN |
EN 14658:2005+A1:2010 Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining |
26.5.2010 |
|
|
|
CEN |
EN 14673:2006+A1:2010 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
20.10.2010 |
|
|
|
CEN |
EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
8.9.2009 |
|
|
|
CEN |
EN 14681:2006+A1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
20.10.2010 |
|
|
|
CEN |
EN 14710-1:2005+A2:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 14710-2:2005+A2:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 14753:2007 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
8.9.2009 |
|
|
|
CEN |
EN 14886:2008 Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 14910:2007+A1:2009 Garden equipment - Walk-behind combustion engine powered trimmers - Safety |
8.9.2009 |
|
|
|
CEN |
EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces |
8.9.2009 |
|
|
|
CEN |
EN 14957:2006+A1:2010 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements |
26.5.2010 |
|
|
|
CEN |
EN 14958:2006+A1:2009 Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements |
8.9.2009 |
|
|
|
CEN |
EN 14973:2006+A1:2008 Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
8.9.2009 |
|
|
|
CEN |
EN ISO 14982:2009 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
8.9.2009 |
|
|
|
CEN |
EN 14985:2012 Cranes - Slewing jib cranes |
23.3.2012 |
|
|
|
CEN |
EN 15000:2008 Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
8.9.2009 |
|
|
|
CEN |
EN 15011:2011 Cranes - Bridge and gantry cranes |
20.7.2011 |
|
|
|
CEN |
EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site - Safety |
8.9.2009 |
|
|
|
CEN |
EN 15056:2006+A1:2009 Cranes - Requirements for container handling spreaders |
8.9.2009 |
|
|
|
CEN |
EN 15059:2009 Snow grooming equipment - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 15061:2007+A1:2008 Safety of machinery - Safety requirements for strip processing line machinery and equipment |
8.9.2009 |
|
|
|
CEN |
EN 15067:2007 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 15093:2008 Safety of Machinery - Safety requirements for hot flat rolling mills |
8.9.2009 |
|
|
|
CEN |
EN 15094:2008 Safety of Machinery - Safety requirements for cold flat rolling mills |
8.9.2009 |
|
|
|
CEN |
EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements |
8.9.2009 |
|
|
|
CEN |
EN 15162:2008 Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws |
8.9.2009 |
|
|
|
CEN |
EN 15163:2008 Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
8.9.2009 |
|
|
|
CEN |
EN 15164:2008 Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines |
8.9.2009 |
|
|
|
CEN |
EN 15166:2008 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
8.9.2009 |
|
|
|
CEN |
EN 15268:2008 Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
8.9.2009 |
|
|
|
CEN |
EN 15503:2009 Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety |
26.5.2010 |
|
|
|
CEN |
EN 15695-1:2009 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures |
26.5.2010 |
|
|
|
CEN |
EN 15695-2:2009 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures |
26.5.2010 |
|
|
|
EN 15695-2:2009/AC:2011 |
|
|
|
|
|
CEN |
EN 15700:2011 Safety for conveyor belts for winter sport or leisure use |
29.2.2012 |
|
|
|
CEN |
EN ISO 15744:2008 Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) |
8.9.2009 |
|
|
|
CEN |
EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
29.2.2012 |
EN 15746-2:2010 Note 2.1 |
Date expired (30.4.2012) |
|
CEN |
EN 15774:2010 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
8.4.2011 |
|
|
|
CEN |
EN 15811:2009 Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool (ISO/TS 28923:2007 modified) |
18.12.2009 |
|
|
|
EN 15811:2009/AC:2010 |
|
|
|
|
|
CEN |
EN 15830:2012 Rough-terrain variable reach trucks - Visibility - Test methods and verification |
24.8.2012 |
|
|
|
CEN |
EN 15861:2012 Food processing machinery - Smokehouses - Safety and hygiene requirements |
24.8.2012 |
|
|
|
CEN |
EN 15895:2011 Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools |
18.11.2011 |
|
|
|
CEN |
EN 15949:2012 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
5.6.2012 |
|
|
|
CEN |
EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
28.11.2013 |
|
|
|
CEN |
EN 15955-2:2013 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
28.11.2013 |
|
|
|
CEN |
EN 15997:2011 All terrain vehicles (ATVs - Quads) - Safety requirements and test methods |
29.2.2012 |
|
|
|
EN 15997:2011/AC:2012 |
|
|
|
|
|
CEN |
EN 16005:2012 Power operated pedestrian doorsets - Safety in use - Requirements and test methods |
5.4.2013 |
|
|
|
CEN |
EN 16029:2012 Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods |
24.8.2012 |
|
|
|
CEN |
EN ISO 16119-1:2013 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 16119-2:2013 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 16119-3:2013 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013) |
28.11.2013 |
|
|
|
CEN |
EN 16230-1:2013 Leisure karts - Part 1: Safety requirements and test methods for karts |
28.11.2013 |
|
|
|
CEN |
EN 16246:2012 Agricultural machinery - Backhoes - Safety |
5.4.2013 |
|
|
|
CEN |
EN 16252:2012 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
5.4.2013 |
|
|
|
CEN |
EN 16307-1:2013 Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
5.4.2013 |
|
|
|
CEN |
EN ISO 19432:2012 Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
15.11.2012 |
EN ISO 19432:2008 Note 2.1 |
Date expired (31.1.2013) |
|
CEN |
EN ISO 19932-1:2013 Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 19932-2:2013 Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013) |
28.11.2013 |
|
|
|
CEN |
EN ISO 20361:2009 Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007) |
8.9.2009 |
|
|
|
EN ISO 20361:2009/AC:2010 |
|
|
|
|
|
CEN |
EN ISO 22867:2011 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
29.2.2012 |
EN ISO 22867:2008 Note 2.1 |
Date expired (30.6.2012) |
|
CEN |
EN ISO 22868:2011 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011) |
20.7.2011 |
EN ISO 22868:2008 Note 2.1 |
Date expired (30.9.2011) |
|
CEN |
EN ISO 23125:2010 Machine tools - Safety - Turning machines (ISO 23125:2010) |
20.10.2010 |
|
|
|
EN ISO 23125:2010/A1:2012 |
24.8.2012 |
Note 3 |
Date expired (31.10.2012) |
|
|
CEN |
EN ISO 28139:2009 Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009) |
18.12.2009 |
|
|
|
CEN |
EN ISO 28881:2013 Machine tools - Safety - Electro-discharge machines (ISO 28881:2013) |
28.11.2013 |
EN 12957:2001+A1:2009 Note 2.1 |
28.2.2014 |
|
EN ISO 28881:2013/AC:2013 |
|
|
|
|
|
CEN |
EN ISO 28927-1:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-2:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-3:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-4:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) |
8.4.2011 |
|
|
|
CEN |
EN ISO 28927-5:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-6:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-7:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-8:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-9:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
26.5.2010 |
|
|
|
CEN |
EN ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
18.11.2011 |
|
|
|
CEN |
EN ISO 28927-11:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) |
20.7.2011 |
|
|
|
CEN |
EN ISO 28927-12:2012 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012) |
5.4.2013 |
|
|
|
Standards developed by Cenelec Standards developed by Cenelec are not classified as A, B or C-type standards in this list. |
||||
|
Cenelec |
EN 50223:2010 Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
20.10.2010 |
|
|
|
Cenelec |
EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements |
26.5.2010 |
|
|
|
EN 50348:2010/AC:2010 |
|
|
|
|
|
Cenelec |
EN 50580:2012 Safety of hand-held electric motor operated tools - Particular requirements for spray guns |
5.6.2012 |
|
|
|
EN 50580:2012/A1:2013 |
28.11.2013 |
Note 3 |
22.7.2016 |
|
|
Cenelec |
EN 60204-1:2006 Safety of machinery - Electrical equipment of machines - Part 1: General requirements IEC 60204-1:2005 (Modified) |
26.5.2010 |
|
|
|
EN 60204-1:2006/A1:2009 IEC 60204-1:2005/A1:2008 |
26.5.2010 |
Note 3 |
Date expired (1.2.2012) |
|
|
EN 60204-1:2006/AC:2010 |
|
|
|
|
|
Cenelec |
EN 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV IEC 60204-11:2000 |
26.5.2010 |
|
|
|
EN 60204-11:2000/AC:2010 |
|
|
|
|
|
Cenelec |
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines IEC 60204-32:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60204-33:2011 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment IEC 60204-33:2009 (Modified) |
18.11.2011 |
|
|
|
Cenelec |
EN 60335-1:2002 Household and similar electrical appliances - Safety - Part 1: General requirements IEC 60335-1:2001 (Modified) |
20.10.2010 |
|
|
|
Cenelec |
EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements IEC 60335-1:2010 (Modified) |
5.6.2012 |
EN 60335-1:2002 and its amendments Note 2.1 |
21.11.2014 |
|
Cenelec |
EN 60335-2-36:2002 Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements IEC 60335-2-36:2002 |
5.4.2013 |
|
|
|
EN 60335-2-36:2002/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-36:2002/AC:2007 |
|
|
|
|
|
Cenelec |
EN 60335-2-37:2002 Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers IEC 60335-2-37:2002 |
5.4.2013 |
|
|
|
EN 60335-2-37:2002/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-37:2002/AC:2007 |
|
|
|
|
|
Cenelec |
EN 60335-2-40:2003 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers IEC 60335-2-40:2002 (Modified) |
28.11.2013 |
|
|
|
EN 60335-2-40:2003/A11:2004 |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
|
EN 60335-2-40:2003/A12:2005 |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
|
EN 60335-2-40:2003/A1:2006 IEC 60335-2-40:2002/A1:2005 (Modified) |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
|
EN 60335-2-40:2003/A2:2009 IEC 60335-2-40:2002/A2:2005 (Modified) |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
|
EN 60335-2-40:2003/A13:2012 |
28.11.2013 |
Note 3 |
11.7.2014 |
|
|
EN 60335-2-40:2003/AC:2010 |
|
|
|
|
|
EN 60335-2-40:2003/AC:2006 |
|
|
|
|
|
EN 60335-2-40:2003/A13:2012/AC:2013 |
|
|
|
|
|
Cenelec |
EN 60335-2-42:2003 Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens IEC 60335-2-42:2002 |
5.4.2013 |
|
|
|
EN 60335-2-42:2003/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-42:2003/AC:2007 |
|
|
|
|
|
Cenelec |
EN 60335-2-47:2003 Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans IEC 60335-2-47:2002 |
5.4.2013 |
|
|
|
EN 60335-2-47:2003/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-47:2003/AC:2007 |
|
|
|
|
|
Cenelec |
EN 60335-2-48:2003 Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters IEC 60335-2-48:2002 |
5.4.2013 |
|
|
|
EN 60335-2-48:2003/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-48:2003/AC:2007 |
|
|
|
|
|
Cenelec |
EN 60335-2-49:2003 Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm IEC 60335-2-49:2002 |
5.4.2013 |
|
|
|
EN 60335-2-49:2003/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-49:2003/AC:2007 |
|
|
|
|
|
Cenelec |
EN 60335-2-65:2003 Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances IEC 60335-2-65:2002 |
5.4.2013 |
|
|
|
EN 60335-2-65:2003/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
|
Cenelec |
EN 60335-2-67:2009 Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment and floor cleaning machines for commercial use IEC 60335-2-67:2002 (Modified) + A1:2005 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 60335-2-67:2012 Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use IEC 60335-2-67:2012 (Modified) |
15.11.2012 |
EN 60335-2-67:2009 Note 2.1 |
3.5.2015 |
|
Cenelec |
EN 60335-2-68:2009 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines for commercial use IEC 60335-2-68:2002 (Modified) + A1:2005 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 60335-2-68:2012 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use IEC 60335-2-68:2012 (Modified) |
15.11.2012 |
EN 60335-2-68:2009 Note 2.1 |
3.5.2015 |
|
Cenelec |
EN 60335-2-69:2009 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use IEC 60335-2-69:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 60335-2-69:2012 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use IEC 60335-2-69:2012 (Modified) |
15.11.2012 |
EN 60335-2-69:2009 Note 2.1 |
28.3.2015 |
|
Cenelec |
EN 60335-2-72:2009 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for automatic machines for floor treatment for commercial use IEC 60335-2-72:2002 (Modified) + A1:2005 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 60335-2-72:2012 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use IEC 60335-2-72:2012 (Modified) |
15.11.2012 |
EN 60335-2-72:2009 Note 2.1 |
3.5.2015 |
|
Cenelec |
EN 60335-2-77:2010 Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers IEC 60335-2-77:2002 (Modified) |
8.4.2011 |
|
|
|
Cenelec |
EN 60335-2-79:2009 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners IEC 60335-2-79:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 60335-2-79:2012 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners IEC 60335-2-79:2012 (Modified) |
15.11.2012 |
EN 60335-2-79:2009 Note 2.1 |
3.4.2015 |
|
Cenelec |
EN 60745-1:2009 Hand-held motor-operated electric tools - Safety - Part 1: General requirements IEC 60745-1:2006 (Modified) |
18.12.2009 |
|
|
|
EN 60745-1:2009/A11:2010 |
8.4.2011 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60745-1:2009/AC:2009 |
|
|
|
|
|
Cenelec |
EN 60745-2-1:2010 Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills IEC 60745-2-1:2003 (Modified) + A1:2008 |
20.10.2010 |
|
|
|
Cenelec |
EN 60745-2-2:2010 Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches IEC 60745-2-2:2003 (Modified) + A1:2008 |
20.10.2010 |
|
|
|
Cenelec |
EN 60745-2-3:2011 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders IEC 60745-2-3:2006 (Modified) + A1:2010 (Modified) |
18.11.2011 |
|
|
|
EN 60745-2-3:2011/A2:2013 IEC 60745-2-3:2006/A2:2012 (Modified) |
28.11.2013 |
Note 3 |
25.2.2016 |
|
|
Cenelec |
EN 60745-2-4:2009 Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type IEC 60745-2-4:2002 (Modified) + A1:2008 (Modified) |
26.5.2010 |
|
|
|
EN 60745-2-4:2009/A11:2011 |
29.2.2012 |
Note 3 |
14.11.2014 |
|
|
Cenelec |
EN 60745-2-5:2010 Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws IEC 60745-2-5:2010 (Modified) |
8.4.2011 |
|
|
|
Cenelec |
EN 60745-2-6:2010 Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers IEC 60745-2-6:2003 (Modified) + A1:2006 + A2:2008 |
20.10.2010 |
|
|
|
Cenelec |
EN 60745-2-8:2009 Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers IEC 60745-2-8:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-9:2009 Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers IEC 60745-2-9:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-11:2010 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) IEC 60745-2-11:2003 (Modified) + A1:2008 |
20.10.2010 |
|
|
|
Cenelec |
EN 60745-2-12:2009 Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators IEC 60745-2-12:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-13:2009 Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws IEC 60745-2-13:2006 (Modified) |
18.12.2009 |
|
|
|
EN 60745-2-13:2009/A1:2010 IEC 60745-2-13:2006/A1:2009 |
20.7.2011 |
Note 3 |
1.12.2013 |
|
|
Cenelec |
EN 60745-2-14:2009 Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers IEC 60745-2-14:2003 (Modified) + A1:2006 (Modified) |
18.12.2009 |
|
|
|
EN 60745-2-14:2009/A2:2010 IEC 60745-2-14:2003/A2:2010 |
8.4.2011 |
Note 3 |
Date expired (1.6.2013) |
|
|
Cenelec |
EN 60745-2-15:2009 Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers IEC 60745-2-15:2006 (Modified) |
18.12.2009 |
|
|
|
EN 60745-2-15:2009/A1:2010 IEC 60745-2-15:2006/A1:2009 |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
|
Cenelec |
EN 60745-2-16:2010 Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers IEC 60745-2-16:2008 (Modified) |
8.4.2011 |
|
|
|
Cenelec |
EN 60745-2-17:2010 Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers IEC 60745-2-17:2010 (Modified) |
8.4.2011 |
|
|
|
Cenelec |
EN 60745-2-18:2009 Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools IEC 60745-2-18:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-19:2009 Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers IEC 60745-2-19:2005 (Modified) |
18.12.2009 |
|
|
|
EN 60745-2-19:2009/A1:2010 IEC 60745-2-19:2005/A1:2010 |
8.4.2011 |
Note 3 |
Date expired (1.6.2013) |
|
|
Cenelec |
EN 60745-2-20:2009 Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws IEC 60745-2-20:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
|
Cenelec |
EN 60745-2-21:2009 Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners IEC 60745-2-21:2002 (Modified) |
18.12.2009 |
|
|
|
EN 60745-2-21:2009/A1:2010 IEC 60745-2-21:2002/A1:2008 |
20.7.2011 |
Note 3 |
1.12.2013 |
|
|
Cenelec |
EN 60745-2-22:2011 Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines IEC 60745-2-22:2011 (Modified) |
18.11.2011 |
|
|
|
EN 60745-2-22:2011/A11:2013 |
28.11.2013 |
Note 3 |
17.12.2015 |
|
|
Cenelec |
EN 60745-2-23:2013 Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools IEC 60745-2-23:2012 (Modified) |
28.11.2013 |
|
|
|
Cenelec |
EN 60947-5-5:1997 Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function IEC 60947-5-5:1997 |
28.11.2013 |
|
|
|
EN 60947-5-5:1997/A1:2005 IEC 60947-5-5:1997/A1:2005 |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
|
EN 60947-5-5:1997/A11:2013 |
28.11.2013 |
Note 3 |
3.12.2015 |
|
|
Cenelec |
EN 61029-1:2009 Safety of transportable motor-operated electric tools - Part 1: General requirements IEC 61029-1:1990 (Modified) |
18.12.2009 |
|
|
|
EN 61029-1:2009/A11:2010 |
8.4.2011 |
Note 3 |
Date expired (28.11.2013) |
|
|
EN 61029-1:2009/AC:2009 |
|
|
|
|
|
Cenelec |
EN 61029-2-1:2010 Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches IEC 61029-2-1:1993 (Modified) + A1:1999 + A2:2001 |
20.10.2010 |
|
|
|
Cenelec |
EN 61029-2-1:2012 Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches IEC 61029-2-1:1993 (Modified) + A1:1999 + A2:2001 |
5.4.2013 |
EN 61029-2-1:2010 Note 2.1 |
3.9.2015 |
|
Cenelec |
EN 61029-2-3:2011 Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers IEC 61029-2-3:1993 (Modified) + A1:2001 |
18.11.2011 |
|
|
|
Cenelec |
EN 61029-2-4:2011 Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders IEC 61029-2-4:1993 (Modified) + A1:2001 (Modified) |
18.11.2011 |
|
|
|
Cenelec |
EN 61029-2-6:2010 Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply IEC 61029-2-6:1993 (Modified) |
20.10.2010 |
|
|
|
Cenelec |
EN 61029-2-8:2010 Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders IEC 61029-2-8:1995 (Modified) + A1:1999 + A2:2001 |
20.10.2010 |
|
|
|
Cenelec |
EN 61029-2-9:2009 Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws IEC 61029-2-9:1995 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 61029-2-9:2012 Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws IEC 61029-2-9:1995 (Modified) |
5.4.2013 |
EN 61029-2-9:2009 Note 2.1 |
3.9.2015 |
|
EN 61029-2-9:2012/A11:2013 |
28.11.2013 |
Note 3 |
12.8.2016 |
|
|
Cenelec |
EN 61029-2-10:2010 Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders IEC 61029-2-10:1998 (Modified) |
20.10.2010 |
|
|
|
EN 61029-2-10:2010/A11:2013 |
28.11.2013 |
Note 3 |
22.7.2016 |
|
|
Cenelec |
EN 61029-2-11:2009 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws IEC 61029-2-11:2001 (Modified) |
18.12.2009 |
|
|
|
Cenelec |
EN 61029-2-11:2012 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws IEC 61029-2-11:2001 (Modified) |
5.4.2013 |
EN 61029-2-11:2009 Note 2.1 |
3.9.2015 |
|
EN 61029-2-11:2012/A11:2013 |
28.11.2013 |
Note 3 |
12.8.2016 |
|
|
Cenelec |
EN 61029-2-12:2011 Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines IEC 61029-2-12:2010 (Modified) |
18.11.2011 |
|
|
|
Cenelec |
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals IEC 61310-1:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking IEC 61310-2:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 61310-3:2008 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators IEC 61310-3:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 61496-1:2004 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests IEC 61496-1:2004 (Modified) |
26.5.2010 |
|
|
|
EN 61496-1:2004/A1:2008 IEC 61496-1:2004/A1:2007 |
26.5.2010 |
Note 3 |
Date expired (1.6.2011) |
|
|
EN 61496-1:2004/AC:2010 |
|
|
|
|
|
Cenelec |
EN 61800-5-2:2007 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional IEC 61800-5-2:2007 |
18.12.2009 |
|
|
|
Cenelec |
EN 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems IEC 62061:2005 |
26.5.2010 |
|
|
|
EN 62061:2005/A1:2013 IEC 62061:2005/A1:2012 |
28.11.2013 |
Note 3 |
18.12.2015 |
|
|
EN 62061:2005/AC:2010 |
|
|
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (“dow”), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda "…/AC:YYYY" are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE, Tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
|
28.11.2013 |
EN |
Official Journal of the European Union |
C 348/63 |
Commission communication in the framework of the implementation of Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
2013/C 348/03
|
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
|
(1) |
(2) |
(3) |
(4) |
|
CEN |
EN ISO 11252:2013 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) |
|
|
|
Cenelec |
EN 41003:2008 Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system |
EN 41003:1998 Note 2.1 |
Date expired (1.7.2011) |
|
Cenelec |
EN 50065-4-2:2001 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-2: Low voltage decoupling filters - Safety requirements |
|
|
|
EN 50065-4-2:2001/A1:2003 |
Note 3 |
Date expired (1.12.2005) |
|
|
EN 50065-4-2:2001/A2:2005 |
Note 3 |
Date expired (1.3.2008) |
|
|
Cenelec |
EN 50065-4-7:2005 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-7: Portable low voltage decoupling filters - Safety requirements |
|
|
|
EN 50065-4-7:2005/AC:2006 |
|
|
|
|
Cenelec |
EN 50085-1:2005 Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements |
EN 50085-1:1997 Note 2.1 |
Date expired (1.7.1999) |
|
EN 50085-1:2005/A1:2013 |
Note 3 |
20.5.2016 |
|
|
Cenelec |
EN 50085-2-1:2006 Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings |
|
|
|
EN 50085-2-1:2006/A1:2011 |
Note 3 |
10.10.2014 |
|
|
Cenelec |
EN 50085-2-2:2008 Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor |
|
|
|
Cenelec |
EN 50085-2-3:2010 Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets |
EN 50085-2-3:1999 Note 2.1 |
Date expired (1.3.2013) |
|
Cenelec |
EN 50085-2-4:2009 Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for service poles and service posts |
|
|
|
Cenelec |
EN 50086-2-4:1994 Conduit systems for cable management - Part 2-4: Particular requirements for conduit systems buried underground |
|
|
|
EN 50086-2-4:1994/A1:2001 |
Note 3 |
Date expired (1.8.2003) |
|
|
EN 50086-2-4:1994/AC:2001 |
|
|
|
|
Cenelec |
EN 50106:2008 Safety of household and similar electrical appliances - Particular rules for routine tests referring to appliances under the scope of EN 60335-1 |
EN 50106:1997 + A1:1998 + A2:2001 Note 2.1 |
Date expired (1.6.2011) |
|
Cenelec |
EN 50117-1:2002 Coaxial cables - Part 1: Generic specification |
|
|
|
EN 50117-1:2002/A1:2006 |
Note 3 |
Date expired (1.7.2009) |
|
|
EN 50117-1:2002/A2:2013 |
Note 3 |
17.6.2016 |
|
|
Cenelec |
EN 50117-2-1:2005 Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz |
|
|
|
EN 50117-2-1:2005/A1:2008 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 50117-2-1:2005/A2:2013 |
Note 3 |
1.7.2016 |
|
|
Cenelec |
EN 50117-2-2:2004 Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1 000 MHz |
|
|
|
EN 50117-2-2:2004/A1:2008 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 50117-2-2:2004/A2:2013 |
Note 3 |
1.7.2016 |
|
|
Cenelec |
EN 50117-2-3:2004 Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz |
|
|
|
EN 50117-2-3:2004/A1:2008 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 50117-2-3:2004/A2:2013 |
Note 3 |
1.7.2016 |
|
|
Cenelec |
EN 50117-2-4:2004 Coaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
|
|
|
EN 50117-2-4:2004/A1:2008 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 50117-2-4:2004/A2:2013 |
Note 3 |
1.7.2016 |
|
|
Cenelec |
EN 50117-2-5:2004 Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz |
|
|
|
EN 50117-2-5:2004/A1:2008 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 50117-2-5:2004/A2:2013 |
Note 3 |
1.7.2016 |
|
|
EN 50117-2-5:2004/AC:2012 |
|
|
|
|
Cenelec |
EN 50117-3-1:2002 Coaxial cables - Part 3-1: Sectional specifications for cables used in Telecom applications - Miniaturized cables used in digital communication systems |
|
|
|
Cenelec |
EN 50117-4-1:2008 Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
|
|
|
EN 50117-4-1:2008/A1:2013 |
Note 3 |
17.6.2016 |
|
|
Cenelec |
EN 50156-1:2004 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
|
|
|
Cenelec |
EN 50178:1997 Electronic equipment for use in power installations |
|
|
|
Cenelec |
EN 50214:2006 Flat polyvinyl chloride sheathed flexible cables |
HD 359 S2:1990 + EN 50214:1997 Note 2.1 |
Date expired (1.10.2008) |
|
EN 50214:2006/AC:2007 |
|
|
|
|
Cenelec |
EN 50250:2002 Conversion adaptors for industrial use |
EN 50250:1998 Note 2.1 |
Date expired (1.7.2005) |
|
EN 50250:2002/AC:2007 |
|
|
|
|
Cenelec |
EN 50262:1998 Cable glands for electrical installations |
|
|
|
EN 50262:1998/A1:2001 |
Note 3 |
Date expired (1.4.2003) |
|
|
EN 50262:1998/A2:2004 |
Note 3 |
Date expired (1.10.2007) |
|
|
EN 50262:1998/AC:1998 |
|
|
|
|
Cenelec |
EN 50267-1:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus |
HD 602 S1:1992 Note 2.1 |
Date expired (1.3.2000) |
|
Cenelec |
EN 50267-2-1:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas |
|
|
|
Cenelec |
EN 50267-2-2:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
|
|
|
Cenelec |
EN 50267-2-3:1998 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
HD 602 S1:1992 Note 2.1 |
Date expired (1.3.2000) |
|
Cenelec |
EN 50274:2002 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts |
|
|
|
EN 50274:2002/AC:2009 |
|
|
|
|
Cenelec |
EN 50288-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
|
|
|
Cenelec |
EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
EN 50288-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-2-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-2-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables |
EN 50288-2-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-2-2:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables |
|
|
|
Cenelec |
EN 50288-2-2:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables |
EN 50288-2-2:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-3-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-3-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables |
EN 50288-3-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-3-2:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables |
|
|
|
Cenelec |
EN 50288-3-2:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables |
EN 50288-3-2:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-4-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-4-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables |
EN 50288-4-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-4-2:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables |
|
|
|
Cenelec |
EN 50288-4-2:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables |
EN 50288-4-2:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-5-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-5-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables |
EN 50288-5-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-5-2:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables |
|
|
|
Cenelec |
EN 50288-5-2:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables |
EN 50288-5-2:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-6-1:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-6-1:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables |
EN 50288-6-1:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-6-2:2003 Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables |
|
|
|
Cenelec |
EN 50288-6-2:2013 Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables |
EN 50288-6-2:2003 Note 2.1 |
18.3.2016 |
|
Cenelec |
EN 50288-7:2005 Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables |
|
|
|
Cenelec |
EN 50288-8:2012 Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz |
|
|
|
Cenelec |
EN 50288-9-1:2012 Multi-element metallic cables used in analogue and digital communication and control - Part 9-1: Sectional specification for screened cables characterised up to 1 000 MHz - Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50288-10-1:2012 Multi-element metallic cables used in analogue and digital communication and control - Part 10-1: Sectional specification for screened cables characterized up to 500 MHz - Horizontal floor and building backbone cables |
|
|
|
Cenelec |
EN 50288-11-1:2012 Multi-element metallic cables used in analogue and digital communication and control - Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz - Horizontal and building backbone cables |
|
|
|
Cenelec |
EN 50289-1-3:2001 Communication cables - Specifications for test methods - Part 1-3: Electrical test methods - Dielectric strength |
|
|
|
Cenelec |
EN 50289-1-4:2001 Communication cables - Specifications for test methods - Part 1-4: Electrical test methods - Insulation resistance |
|
|
|
Cenelec |
EN 50290-2-1:2005 Communication cables - Part 2-1: Common design rules and construction |
|
|
|
Cenelec |
EN 50290-2-20:2001 Communication cables - Part 2-20: Common design rules and construction - General |
|
|
|
Cenelec |
EN 50290-2-21:2001 Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds |
|
|
|
EN 50290-2-21:2001/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
|
EN 50290-2-21:2001/AC:2003 |
|
|
|
|
Cenelec |
EN 50290-2-22:2001 Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds |
|
|
|
EN 50290-2-22:2001/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
|
Cenelec |
EN 50290-2-23:2001 Communication cables - Part 2-23: Common design rules and construction - PE insulation |
|
|
|
Cenelec |
EN 50290-2-24:2002 Communication cables - Part 2-24: Common design rules and construction - PE sheathing |
|
|
|
EN 50290-2-24:2002/A1:2008 |
Note 3 |
Date expired (1.11.2011) |
|
|
Cenelec |
EN 50290-2-25:2002 Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds |
|
|
|
Cenelec |
EN 50290-2-26:2002 Communication cables - Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds |
|
|
|
EN 50290-2-26:2002/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
|
Cenelec |
EN 50290-2-27:2002 Communication cables - Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds |
|
|
|
EN 50290-2-27:2002/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
|
EN 50290-2-27:2002/A1:2007/AC:2010 |
|
|
|
|
Cenelec |
EN 50290-2-28:2002 Communication cables - Part 2-28: Common design rules and construction - Filling compounds for filled cables |
|
|
|
Cenelec |
EN 50290-2-29:2002 Communication cables - Part 2-29: Common design rules and construction - Cross-linked PE insulation compounds |
|
|
|
Cenelec |
EN 50290-2-30:2002 Communication cables - Part 2-30: Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
|
|
|
Cenelec |
EN 50290-4-1:2001 Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
|
|
|
Cenelec |
EN 50363-0:2005 Insulating, sheathing and covering materials for low-voltage energy cables - Part 0: General introduction |
|
|
|
Cenelec |
EN 50363-0:2011 Insulating, sheathing and covering materials for low-voltage energy cables - Part 0: General introduction |
EN 50363-0:2005 Note 2.1 |
14.3.2014 |
|
Cenelec |
EN 50363-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 1: Cross-linked elastomeric insulating compounds |
|
|
|
Cenelec |
EN 50363-2-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1: Cross-linked elastomeric sheathing compounds |
|
|
|
EN 50363-2-1:2005/A1:2011 |
Note 3 |
14.3.2014 |
|
|
Cenelec |
EN 50363-2-2:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 2-2: Cross-linked elastomeric covering compounds |
|
|
|
Cenelec |
EN 50363-3:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds |
|
|
|
EN 50363-3:2005/A1:2011 |
Note 3 |
14.3.2014 |
|
|
Cenelec |
EN 50363-4-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 4-1: PVC sheathing compounds |
|
|
|
Cenelec |
EN 50363-4-2:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 4-2: PVC covering compounds |
|
|
|
Cenelec |
EN 50363-5:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halogen-free, cross-linked insulating compounds |
|
|
|
EN 50363-5:2005/A1:2011 |
Note 3 |
14.3.2014 |
|
|
Cenelec |
EN 50363-6:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 6: Halogen-free, cross-linked sheathing compounds |
|
|
|
EN 50363-6:2005/A1:2011 |
Note 3 |
14.3.2014 |
|
|
Cenelec |
EN 50363-7:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 7: Halogen-free, thermoplastic insulating compounds |
|
|
|
Cenelec |
EN 50363-8:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing compounds |
|
|
|
EN 50363-8:2005/A1:2011 |
Note 3 |
14.3.2014 |
|
|
Cenelec |
EN 50363-9-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1: Miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC) |
|
|
|
Cenelec |
EN 50363-10-1:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC) |
|
|
|
Cenelec |
EN 50363-10-2:2005 Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane |
|
|
|
Cenelec |
EN 50364:2010 Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications |
EN 50364:2001 Note 2.1 |
Date expired (1.11.2012) |
|
Cenelec |
EN 50369:2005 Liquid tight sheathing systems for cable management |
|
|
|
Cenelec |
EN 50395:2005 Electrical test methods for low voltage energy cables |
HD 21.2 S3:1997 + A1:2002 + HD 22.2 S3:1997 + A1:2002 Note 2.1 |
Date expired (1.7.2008) |
|
EN 50395:2005/A1:2011 |
Note 3 |
14.3.2014 |
|
|
Cenelec |
EN 50396:2005 Non electrical test methods for low voltage energy cables |
HD 21.2 S3:1997 + A1:2002 + HD 22.2 S3:1997 + A1:2002 Note 2.1 |
Date expired (1.7.2008) |
|
EN 50396:2005/A1:2011 |
Note 3 |
14.3.2014 |
|
|
Cenelec |
EN 50406-1:2004 End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables |
|
|
|
Cenelec |
EN 50406-2:2004 End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables |
|
|
|
Cenelec |
EN 50407-1:2004 Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
|
|
|
Cenelec |
EN 50425:2008 Switches for household and similar fixed electrical installations - Collateral standard - Fireman's switches for exterior and interior signs and luminaires |
|
|
|
Cenelec |
EN 50428:2005 Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES) |
|
|
|
EN 50428:2005/A1:2007 |
Note 3 |
Date expired (1.10.2010) |
|
|
EN 50428:2005/A2:2009 |
Note 3 |
Date expired (1.6.2012) |
|
|
Cenelec |
EN 50441-1:2006 Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1 |
|
|
|
Cenelec |
EN 50441-1:2012 Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1 |
EN 50441-1:2006 Note 2.1 |
23.1.2015 |
|
Cenelec |
EN 50441-2:2006 Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 2 |
|
|
|
Cenelec |
EN 50441-2:2012 Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1 |
EN 50441-2:2006 Note 2.1 |
23.1.2015 |
|
Cenelec |
EN 50441-3:2006 Cables for indoor residential telecommunication installations - Part 3: Screened cables - Grade 3 |
|
|
|
Cenelec |
EN 50441-4:2012 Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3 |
|
|
|
Cenelec |
EN 50445:2008 Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) |
|
|
|
Cenelec |
EN 50491-3:2009 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements |
EN 50090-2-2:1996 + A1:2002 + A2:2007 |
Date expired (1.3.2012) |
|
Cenelec |
EN 50491-4-1:2012 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
|
|
|
Cenelec |
EN 50497:2007 Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables |
|
|
|
Cenelec |
EN 50520:2009 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations |
|
|
|
Cenelec |
EN 50525-1:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements |
HD 21.1 S4:2002 + HD 22.1 S4:2002 Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-11:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation |
HD 21.5 S3:1994 and its amendments + HD 21.12 S1:1994 and its amendment Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-12:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-12: Cables for general applications - Cables with thermoplastic PVC insulation for extensible leads |
HD 21.10 S2:2001 Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-21:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation |
HD 22.4 S4:2004 + HD 22.10 S2:2007 + HD 22.11 S2:2007 + HD 22.12 S2:2007 + HD 22.16 S2:2007 Note 2.1 |
17.1.2014 |
|
EN 50525-2-21:2011/AC:2013 |
|
|
|
|
Cenelec |
EN 50525-2-22:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-22: Cables for general applications - High flexibility braided cables with crosslinked elastomeric insulation |
HD 22.14 S3:2007 Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-31:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-31: Cables for general applications - Single core non-sheathed cables with thermoplastic PVC insulation |
HD 21.3 S3:1995 and its amendments + HD 21.7 S2:1996 and its amendment Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-41:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-41: Cables for general applications - Single core cables with crosslinked silicone rubber insulation |
HD 22.3 S4:2004 and its amendment Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-42:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-42: Cables for general applications - Single core non-sheathed cables with crosslinked EVA insulation |
HD 22.7 S2:1995 and its amendments Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-51:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation |
HD 21.13 S1:1995 and its amendment Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-71:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation |
HD 21.5 S3:1994 and its amendments Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-72:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-72: Cables for general applications - Flat divisible cables (cords) with thermoplastic PVC insulation |
HD 21.11 S1:1995 and its amendment Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-81:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-81: Cables for general applications - Cables with crosslinked elastomeric covering for arc welding |
HD 22.6 S2:1995 and its amendments Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-82:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-82: Cables for general applications - Cables with crosslinked elastomeric insulation for decorative chains |
HD 22.8 S2:1994 and its amendments Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-2-83:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation |
HD 22.15 S2:2007 Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-3-11:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke |
HD 21.14 S1:2003 Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-3-21:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke |
HD 22.13 S2:2007 Note 2.1 |
17.1.2014 |
|
EN 50525-3-21:2011/AC:2013 |
|
|
|
|
Cenelec |
EN 50525-3-31:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-31: Cables with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke |
HD 21.15 S1:2006 Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50525-3-41:2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-41: Cables with special fire performance - Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke |
HD 22.9 S3:2007 Note 2.1 |
17.1.2014 |
|
Cenelec |
EN 50550:2011 Power frequency overvoltage protective device for household and similar applications (POP) |
|
|
|
EN 50550:2011/AC:2012 |
|
|
|
|
Cenelec |
EN 50556:2011 Road traffic signal systems |
|
|
|
Cenelec |
EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
|
|
|
Cenelec |
EN 60034-1:2004 Rotating electrical machines - Part 1: Rating and performance IEC 60034-1:2004 |
EN 60034-1:1998 + A1:1998 + A2:1999 + A11:2002 Note 2.1 |
Date expired (1.6.2007) |
|
Cenelec |
EN 60034-1:2010 Rotating electrical machines - Part 1: Rating and performance IEC 60034-1:2010 (Modified) |
EN 60034-1:2004 Note 2.1 |
Date expired (1.10.2013) |
|
EN 60034-1:2010/AC:2010 |
|
|
|
|
Cenelec |
EN 60034-5:2001 Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification IEC 60034-5:2000 |
EN 60034-5:1986 Note 2.1 |
Date expired (1.12.2003) |
|
EN 60034-5:2001/A1:2007 IEC 60034-5:2000/A1:2006 |
Note 3 |
Date expired (1.12.2009) |
|
|
Cenelec |
EN 60034-6:1993 Rotating electrical machines - Part 6: Methods of cooling (IC Code) IEC 60034-6:1991 |
|
|
|
Cenelec |
EN 60034-7:1993 Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) IEC 60034-7:1992 |
|
|
|
EN 60034-7:1993/A1:2001 IEC 60034-7:1992/A1:2000 |
Note 3 |
Date expired (1.11.2003) |
|
|
Cenelec |
EN 60034-8:2007 Rotating electrical machines - Part 8: Terminal markings and direction of rotation IEC 60034-8:2007 |
EN 60034-8:2002 Note 2.1 |
Date expired (1.7.2010) |
|
Cenelec |
EN 60034-9:2005 Rotating electrical machines - Part 9: Noise limits IEC 60034-9:2003 (Modified) |
EN 60034-9:1997 Note 2.1 |
Date expired (1.3.2008) |
|
EN 60034-9:2005/A1:2007 IEC 60034-9:2003/A1:2007 |
Note 3 |
Date expired (1.4.2010) |
|
|
Cenelec |
EN 60034-11:2004 Rotating electrical machines - Part 11: Thermal protection IEC 60034-11:2004 |
|
|
|
Cenelec |
EN 60034-12:2002 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors IEC 60034-12:2002 |
EN 60034-12:1995 + A2:1995 + A11:1999 Note 2.1 |
Date expired (1.5.2005) |
|
EN 60034-12:2002/A1:2007 IEC 60034-12:2002/A1:2007 |
Note 3 |
Date expired (1.9.2010) |
|
|
Cenelec |
EN 60034-14:2004 Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity IEC 60034-14:2003 |
EN 60034-14:1996 Note 2.1 |
Date expired (1.12.2006) |
|
EN 60034-14:2004/A1:2007 IEC 60034-14:2003/A1:2007 |
Note 3 |
Date expired (1.6.2010) |
|
|
Cenelec |
EN 60051-1:1998 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts IEC 60051-1:1997 |
EN 60051-1:1989 + A1:1995 + A2:1995 Note 2.1 |
Date expired (1.9.1999) |
|
Cenelec |
EN 60051-2:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters IEC 60051-2:1984 |
|
|
|
Cenelec |
EN 60051-3:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters IEC 60051-3:1984 |
|
|
|
EN 60051-3:1989/A1:1995 IEC 60051-3:1984/A1:1994 |
Note 3 |
Date expired (1.10.1995) |
|
|
Cenelec |
EN 60051-4:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 4: Special requirements for frequency meters IEC 60051-4:1984 |
|
|
|
Cenelec |
EN 60051-5:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes IEC 60051-5:1985 |
|
|
|
Cenelec |
EN 60051-6:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters IEC 60051-6:1984 |
|
|
|
Cenelec |
EN 60051-7:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for multi-function instruments IEC 60051-7:1984 |
|
|
|
Cenelec |
EN 60051-8:1989 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for accessories IEC 60051-8:1984 |
|
|
|
Cenelec |
EN 60051-9:1989 Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9: Recommended test methods IEC 60051-9:1988 |
|
|
|
EN 60051-9:1989/A2:1995 IEC 60051-9:1988/A2:1995 |
Note 3 |
Date expired (15.2.1996) |
|
|
EN 60051-9:1989/A1:1995 IEC 60051-9:1988/A1:1994 |
Note 3 |
Date expired (15.2.1996) |
|
|
Cenelec |
EN 60061-1:1993 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps IEC 60061-1:1969 (Modified) + IEC 60061-1L:1987 (Modified) + IEC 60061-1N:1992 (Modified) |
|
|
|
EN 60061-1:1993/A1:1995 IEC 60061-1P:1994 |
Note 3 |
Date expired (1.12.1995) |
|
|
EN 60061-1:1993/A3:1995 IEC 60061-1R:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-1:1993/A2:1995 IEC 60061-1Q:1994 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-1:1993/A4:1996 IEC 60061-1S:1996 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60061-1:1993/A5:1996 IEC 60061-1T:1996 |
Note 3 |
Date expired (1.4.1997) |
|
|
EN 60061-1:1993/A6:1996 IEC 60061-1U:1996 |
Note 3 |
Date expired (1.7.1997) |
|
|
EN 60061-1:1993/A7:1997 IEC 60061-1V:1997 |
Note 3 |
Date expired (1.2.1998) |
|
|
EN 60061-1:1993/A21:1998 IEC 60061-1:1969/A21:1998 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-1:1993/A22:1999 IEC 60061-1:1969/A22:1999 |
Note 3 |
Date expired (1.4.2006) |
|
|
EN 60061-1:1993/A23:1999 IEC 60061-1:1969/A23:1999 |
Note 3 |
Date expired (1.8.2006) |
|
|
EN 60061-1:1993/A24:2000 IEC 60061-1:1969/A24:2000 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60061-1:1993/A26:2001 IEC 60061-1:1969/A26:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-1:1993/A25:2001 IEC 60061-1:1969/A25:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-1:1993/A27:2001 IEC 60061-1:1969/A27:2001 |
Note 3 |
Date expired (1.11.2004) |
|
|
EN 60061-1:1993/A28:2002 IEC 60061-1:1969/A28:2002 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-1:1993/A29:2002 IEC 60061-1:1969/A29:2002 |
Note 3 |
Date expired (1.6.2005) |
|
|
EN 60061-1:1993/A30:2002 IEC 60061-1:1969/A30:2002 |
Note 3 |
Date expired (1.11.2005) |
|
|
EN 60061-1:1993/A31:2003 IEC 60061-1:1969/A31:2003 |
Note 3 |
Date expired (1.6.2006) |
|
|
EN 60061-1:1993/A32:2003 IEC 60061-1:1969/A32:2003 |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 60061-1:1993/A33:2003 IEC 60061-1:1969/A33:2003 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60061-1:1993/A34:2004 IEC 60061-1:1969/A34:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60061-1:1993/A35:2005 IEC 60061-1:1969/A35:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60061-1:1993/A36:2005 IEC 60061-1:1969/A36:2005 |
Note 3 |
Date expired (1.10.2008) |
|
|
EN 60061-1:1993/A37:2006 IEC 60061-1:1969/A37:2006 |
Note 3 |
Date expired (1.9.2009) |
|
|
EN 60061-1:1993/A38:2007 IEC 60061-1:1969/A38:2006 |
Note 3 |
Date expired (1.3.2010) |
|
|
EN 60061-1:1993/A39:2007 IEC 60061-1:1969/A39:2007 |
Note 3 |
Date expired (1.5.2010) |
|
|
EN 60061-1:1993/A40:2008 IEC 60061-1:1969/A40:2008 |
Note 3 |
Date expired (1.8.2011) |
|
|
EN 60061-1:1993/A41:2009 IEC 60061-1:1969/A41:2009 |
Note 3 |
Date expired (1.6.2012) |
|
|
EN 60061-1:1993/A42:2009 IEC 60061-1:1969/A42:2009 |
Note 3 |
Date expired (1.9.2012) |
|
|
EN 60061-1:1993/A44:2010 IEC 60061-1:1969/A44:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-1:1993/A43:2010 IEC 60061-1:1969/A43:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-1:1993/A46:2011 IEC 60061-1:1969/A46:2011 |
Note 3 |
17.8.2014 |
|
|
EN 60061-1:1993/A45:2011 IEC 60061-1:1969/A45:2011 |
Note 3 |
17.8.2014 |
|
|
EN 60061-1:1993/A47:2012 IEC 60061-1:1969/A47:2011 |
Note 3 |
3.3.2015 |
|
|
EN 60061-1:1993/A48:2012 IEC 60061-1:1969/A48:2012 |
Note 3 |
1.11.2015 |
|
|
EN 60061-1:1993/A49:2013 IEC 60061-1:1969/A49:2013 |
Note 3 |
2.4.2016 |
|
|
EN 60061-1, -2, -3, and -4 series have a particular structure and therefore the date of cessation of presumption of conformity indicated only affects the types modified by the different amendments. |
|||
|
Cenelec |
EN 60061-2:1993 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders IEC 60061-2:1969 (Modified) + IEC 60061-2H:1987 (Modified) + IEC 60061-2I:1990 (Modified) + IEC 60061-2K:1992 (Modified) |
|
|
|
EN 60061-2:1993/A32:2005 IEC 60061-2:1969/A32:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60061-2:1993/A33:2005 IEC 60061-2:1969/A33:2005 |
Note 3 |
Date expired (1.10.2008) |
|
|
EN 60061-2:1993/A34:2006 IEC 60061-2:1969/A34:2006 |
Note 3 |
Date expired (1.9.2009) |
|
|
EN 60061-2:1993/A35:2007 IEC 60061-2:1969/A35:2006 |
Note 3 |
Date expired (1.3.2010) |
|
|
EN 60061-2:1993/A36:2007 IEC 60061-2:1969/A36:2007 |
Note 3 |
Date expired (1.5.2010) |
|
|
EN 60061-2:1993/A37:2008 IEC 60061-2:1969/A37:2008 |
Note 3 |
Date expired (1.8.2011) |
|
|
EN 60061-2:1993/A38:2009 IEC 60061-2:1969/A38:2009 |
Note 3 |
Date expired (1.6.2012) |
|
|
EN 60061-2:1993/A39:2009 IEC 60061-2:1969/A39:2009 |
Note 3 |
Date expired (1.9.2012) |
|
|
EN 60061-2:1993/A40:2010 IEC 60061-2:1969/A40:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-2:1993/A41:2010 IEC 60061-2:1969/A41:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-2:1993/A43:2011 IEC 60061-2:1969/A43:2011 |
Note 3 |
29.10.2014 |
|
|
EN 60061-2:1993/A42:2011 IEC 60061-2:1969/A42:2011 |
Note 3 |
29.10.2014 |
|
|
EN 60061-2:1993/A44:2012 IEC 60061-2:1969/A44:2011 |
Note 3 |
19.1.2015 |
|
|
EN 60061-2:1993/A45:2012 IEC 60061-2:1969/A45:2012 |
Note 3 |
1.11.2015 |
|
|
EN 60061-2:1993/A46:2013 IEC 60061-2:1969/A46:2013 |
Note 3 |
2.4.2016 |
|
|
EN 60061-2:1993/A1:1995 IEC 60061-2L:1994 |
Note 3 |
Date expired (1.12.1995) |
|
|
EN 60061-2:1993/A3:1995 IEC 60061-2N:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-2:1993/A2:1995 IEC 60061-2M:1994 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-2:1993/A4:1996 IEC 60061-2P:1996 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60061-2:1993/A5:1996 IEC 60061-2Q:1996 |
Note 3 |
Date expired (1.4.1997) |
|
|
EN 60061-2:1993/A6:1996 IEC 60061-2R:1996 |
Note 3 |
Date expired (1.7.1997) |
|
|
EN 60061-2:1993/A7:1997 IEC 60061-2S:1997 |
Note 3 |
Date expired (1.2.1998) |
|
|
EN 60061-2:1993/A18:1998 IEC 60061-2:1969/A18:1998 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-2:1993/A19:1999 IEC 60061-2:1969/A19:1999 |
Note 3 |
Date expired (1.4.2006) |
|
|
EN 60061-2:1993/A20:1999 IEC 60061-2:1969/A20:1999 |
Note 3 |
Date expired (1.8.2006) |
|
|
EN 60061-2:1993/A21:2000 IEC 60061-2:1969/A21:2000 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60061-2:1993/A22:2001 IEC 60061-2:1969/A22:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-2:1993/A23:2001 IEC 60061-2:1969/A23:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-2:1993/A24:2001 IEC 60061-2:1969/A24:2001 |
Note 3 |
Date expired (1.11.2004) |
|
|
EN 60061-2:1993/A25:2002 IEC 60061-2:1969/A25:2002 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-2:1993/A26:2002 IEC 60061-2:1969/A26:2002 |
Note 3 |
Date expired (1.6.2005) |
|
|
EN 60061-2:1993/A27:2002 IEC 60061-2:1969/A27:2002 |
Note 3 |
Date expired (1.11.2005) |
|
|
EN 60061-2:1993/A28:2003 IEC 60061-2:1969/A28:2003 |
Note 3 |
Date expired (1.6.2006) |
|
|
EN 60061-2:1993/A29:2003 IEC 60061-2:1969/A29:2003 |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 60061-2:1993/A30:2003 IEC 60061-2:1969/A30:2003 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60061-2:1993/A31:2004 IEC 60061-2:1969/A31:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60061-1, -2, -3, and -4 series have a particular structure and therefore the date of cessation of presumption of conformity indicated only affects the types modified by the different amendments. |
|||
|
Cenelec |
EN 60061-3:1993 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges IEC 60061-3:1969 (Modified) + IEC 60061-3M:1992 (Modified) |
|
|
|
EN 60061-3:1993/A1:1995 IEC 60061-3N:1994 |
Note 3 |
Date expired (1.12.1995) |
|
|
EN 60061-3:1993/A3:1995 IEC 60061-3Q:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-3:1993/A2:1995 IEC 60061-3P:1994 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-3:1993/A4:1996 IEC 60061-3R:1996 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60061-3:1993/A5:1996 IEC 60061-3S:1996 |
Note 3 |
Date expired (1.4.1997) |
|
|
EN 60061-3:1993/A6:1996 IEC 60061-3T:1996 |
Note 3 |
Date expired (1.7.1997) |
|
|
EN 60061-3:1993/A7:1997 IEC 60061-3U:1997 |
Note 3 |
Date expired (1.2.1998) |
|
|
EN 60061-3:1993/A20:1998 IEC 60061-3:1969/A20:1998 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-3:1993/A21:1999 IEC 60061-3:1969/A21:1999 |
Note 3 |
Date expired (1.4.2006) |
|
|
EN 60061-3:1993/A22:1999 IEC 60061-3:1969/A22:1999 |
Note 3 |
Date expired (1.8.2006) |
|
|
EN 60061-3:1993/A23:2000 IEC 60061-3:1969/A23:2000 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60061-3:1993/A25:2001 IEC 60061-3:1969/A25:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-3:1993/A24:2001 IEC 60061-3:1969/A24:2001 |
Note 3 |
Date expired (1.3.2004) |
|
|
EN 60061-3:1993/A26:2001 IEC 60061-3:1969/A26:2001 |
Note 3 |
Date expired (1.11.2004) |
|
|
EN 60061-3:1993/A27:2002 IEC 60061-3:1969/A27:2002 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-3:1993/A28:2002 IEC 60061-3:1969/A28:2002 |
Note 3 |
Date expired (1.6.2005) |
|
|
EN 60061-3:1993/A29:2002 IEC 60061-3:1969/A29:2002 |
Note 3 |
Date expired (1.11.2005) |
|
|
EN 60061-3:1993/A30:2003 IEC 60061-3:1969/A30:2003 |
Note 3 |
Date expired (1.6.2006) |
|
|
EN 60061-3:1993/A31:2003 IEC 60061-3:1969/A31:2003 |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 60061-3:1993/A32:2003 IEC 60061-3:1969/A32:2003 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60061-3:1993/A33:2004 IEC 60061-3:1969/A33:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60061-3:1993/A34:2005 IEC 60061-3:1969/A34:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60061-3:1993/A35:2005 IEC 60061-3:1969/A35:2005 |
Note 3 |
Date expired (1.11.2008) |
|
|
EN 60061-3:1993/A36:2006 IEC 60061-3:1969/A36:2006 |
Note 3 |
Date expired (1.9.2009) |
|
|
EN 60061-3:1993/A37:2007 IEC 60061-3:1969/A37:2006 |
Note 3 |
Date expired (1.3.2010) |
|
|
EN 60061-3:1993/A38:2007 IEC 60061-3:1969/A38:2007 |
Note 3 |
Date expired (1.5.2010) |
|
|
EN 60061-3:1993/A39:2009 IEC 60061-3:1969/A39:2009 |
Note 3 |
Date expired (1.6.2012) |
|
|
EN 60061-3:1993/A40:2009 IEC 60061-3:1969/A40:2009 |
Note 3 |
Date expired (1.9.2012) |
|
|
EN 60061-3:1993/A42:2010 IEC 60061-3:1969/A42:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-3:1993/A41:2010 IEC 60061-3:1969/A41:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60061-3:1993/A44:2011 IEC 60061-3:1969/A44:2011 |
Note 3 |
29.10.2014 |
|
|
EN 60061-3:1993/A43:2011 IEC 60061-3:1969/A43:2011 |
Note 3 |
29.10.2014 |
|
|
EN 60061-3:1993/A45:2012 IEC 60061-3:1969/A45:2011 |
Note 3 |
24.1.2015 |
|
|
EN 60061-3:1993/A46:2012 IEC 60061-3:1969/A46:2012 |
Note 3 |
1.11.2015 |
|
|
EN 60061-3:1993/A47:2013 IEC 60061-3:1969/A47:2013 |
Note 3 |
2.4.2016 |
|
|
EN 60061-1, -2, -3, and -4 series have a particular structure and therefore the date of cessation of presumption of conformity indicated only affects the types modified by the different amendments. |
|||
|
Cenelec |
EN 60061-4:1992 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information IEC 60061-4:1990 (Modified) |
|
|
|
EN 60061-4:1992/A1:1995 IEC 60061-4A:1992 + IEC 60061-4B:1994 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-4:1992/A3:1995 IEC 60061-4D:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-4:1992/A2:1995 IEC 60061-4C:1994 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60061-4:1992/A5:1998 IEC 60061-4:1990/A5:1998 |
Note 3 |
Date expired (1.4.2005) |
|
|
EN 60061-4:1992/A6:2000 IEC 60061-4:1990/A6:2000 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60061-4:1992/A7:2001 IEC 60061-4:1990/A7:2001 |
Note 3 |
Date expired (1.11.2004) |
|
|
EN 60061-4:1992/A8:2003 IEC 60061-4:1990/A8:2003 |
Note 3 |
Date expired (1.6.2006) |
|
|
EN 60061-4:1992/A9:2005 IEC 60061-4:1990/A9:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60061-4:1992/A10:2006 IEC 60061-4:1990/A10:2006 |
Note 3 |
Date expired (1.9.2009) |
|
|
EN 60061-4:1992/A11:2007 IEC 60061-4:1990/A11:2007 |
Note 3 |
Date expired (1.11.2010) |
|
|
EN 60061-4:1992/A12:2009 IEC 60061-4:1990/A12:2009 |
Note 3 |
Date expired (1.9.2012) |
|
|
EN 60061-4:1992/A13:2011 IEC 60061-4:1990/A13:2011 |
Note 3 |
Date expired (5.10.2013) |
|
|
EN 60061-4:1992/A14:2011 IEC 60061-4:1990/A14:2011 |
Note 3 |
26.9.2014 |
|
|
EN 60061-1, -2, -3, and -4 series have a particular structure and therefore the date of cessation of presumption of conformity indicated only affects the types modified by the different amendments. |
|||
|
Cenelec |
EN 60065:2002 Audio, video and similar electronic apparatus - Safety requirements IEC 60065:2001 (Modified) |
EN 60065:1998 Note 2.1 |
Date expired (1.3.2007) |
|
EN 60065:2002/A1:2006 IEC 60065:2001/A1:2005 (Modified) |
Note 3 |
Date expired (1.12.2008) |
|
|
EN 60065:2002/A11:2008 |
Note 3 |
Date expired (1.7.2010) |
|
|
EN 60065:2002/A2:2010 IEC 60065:2001/A2:2010 (Modified) |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60065:2002/A12:2011 |
Note 3 |
Date expired (24.1.2013) |
|
|
EN 60065:2002/AC:2007 |
|
|
|
|
Cenelec |
EN 60110-1:1998 Power capacitors for induction heating installations - Part 1: General IEC 60110-1:1998 |
HD 207 S1:1977 Note 2.1 |
Date expired (1.5.2001) |
|
Cenelec |
EN 60127-1:2006 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links IEC 60127-1:2006 |
EN 60127-1:1991 + A1:1999 + A2:2003 Note 2.1 |
Date expired (1.7.2009) |
|
EN 60127-1:2006/A1:2011 IEC 60127-1:2006/A1:2011 |
Note 3 |
25.5.2014 |
|
|
Cenelec |
EN 60127-2:2003 Miniature fuses - Part 2: Cartridge fuse-links IEC 60127-2:2003 |
EN 60127-2:1991 + A1:1995 + A2:2000 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60127-2:2003/A1:2003 IEC 60127-2:2003/A1:2003 |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 60127-2:2003/A2:2010 IEC 60127-2:2003/A2:2010 |
Note 3 |
Date expired (1.7.2013) |
|
|
Cenelec |
EN 60127-3:1996 Miniature fuses - Part 3: Sub-miniature fuse-links IEC 60127-3:1988 + A1:1991 |
EN 60127-3:1991 Note 2.1 |
Date expired (1.12.1996) |
|
EN 60127-3:1996/A2:2003 IEC 60127-3:1988/A2:2002 |
Note 3 |
Date expired (1.2.2006) |
|
|
EN 60127-3:1996/AC:1996 |
|
|
|
|
Cenelec |
EN 60127-4:2005 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types IEC 60127-4:2005 |
EN 60127-4:1996 + A1:2002 + A2:2003 Note 2.1 |
Date expired (1.3.2008) |
|
EN 60127-4:2005/A1:2009 IEC 60127-4:2005/A1:2008 |
Note 3 |
Date expired (1.2.2012) |
|
|
EN 60127-4:2005/A2:2013 IEC 60127-4:2005/A2:2012 |
Note 3 |
11.1.2016 |
|
|
Cenelec |
EN 60127-6:1994 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links IEC 60127-6:1994 |
|
|
|
EN 60127-6:1994/A1:1996 IEC 60127-6:1994/A1:1996 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60127-6:1994/A2:2003 IEC 60127-6:1994/A2:2002 |
Note 3 |
Date expired (1.2.2006) |
|
|
Cenelec |
EN 60127-7:2013 Miniature fuses - Part 7: Miniature fuse-links for special applications IEC 60127-7:2013 |
|
|
|
Cenelec |
EN 60143-2:1994 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks IEC 60143-2:1994 |
|
|
|
Cenelec |
EN 60143-2:2013 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks IEC 60143-2:2012 |
EN 60143-2:1994 Note 2.1 |
15.1.2016 |
|
Cenelec |
EN 60155:1995 Glow-starters for fluorescent lamps IEC 60155:1993 |
|
|
|
EN 60155:1995/A1:1995 IEC 60155:1993/A1:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60155:1995/A2:2007 IEC 60155:1993/A2:2006 |
Note 3 |
Date expired (1.12.2009) |
|
|
Cenelec |
EN 60204-1:2006 Safety of machinery - Electrical equipment of machines - Part 1: General requirements IEC 60204-1:2005 (Modified) |
EN 60204-1:1997 Note 2.1 |
Date expired (1.6.2009) |
|
EN 60204-1:2006/A1:2009 IEC 60204-1:2005/A1:2008 |
Note 3 |
Date expired (1.2.2012) |
|
|
EN 60204-1:2006/AC:2010 |
|
|
|
|
Cenelec |
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines IEC 60204-32:2008 |
|
|
|
Cenelec |
EN 60215:1989 Safety requirements for radio transmitting equipment IEC 60215:1987 |
|
|
|
EN 60215:1989/A1:1992 IEC 60215:1987/A1:1990 |
Note 3 |
Date expired (1.6.1993) |
|
|
EN 60215:1989/A2:1994 IEC 60215:1987/A2:1993 |
Note 3 |
Date expired (15.7.1995) |
|
|
Cenelec |
EN 60228:2005 Conductors of insulated cables IEC 60228:2004 |
|
|
|
EN 60228:2005/AC:2005 |
|
|
|
|
Cenelec |
EN 60238:2004 Edison screw lampholders IEC 60238:2004 |
EN 60238:1998 + A1:1999 + A2:2002 Note 2.1 |
Date expired (1.10.2007) |
|
EN 60238:2004/A1:2008 IEC 60238:2004/A1:2008 |
Note 3 |
Date expired (1.8.2011) |
|
|
EN 60238:2004/A2:2011 IEC 60238:2004/A2:2011 |
Note 3 |
30.3.2014 |
|
|
EN 60238:2004/AC:2005 |
|
|
|
|
Cenelec |
EN 60252-1:2001 AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation IEC 60252-1:2001 |
EN 60252:1994 Note 2.1 |
Date expired (1.10.2004) |
|
Cenelec |
EN 60252-1:2011 AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation IEC 60252-1:2010 |
EN 60252-1:2001 Note 2.1 |
2.1.2014 |
|
Cenelec |
EN 60252-2:2003 AC motor capacitors - Part 2: Motor start capacitors IEC 60252-2:2003 |
|
|
|
Cenelec |
EN 60252-2:2011 AC motor capacitors - Part 2: Motor start capacitors IEC 60252-2:2010 |
EN 60252-2:2003 Note 2.1 |
19.1.2014 |
|
Cenelec |
EN 60255-5:2001 Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests IEC 60255-5:2000 |
|
|
|
Cenelec |
EN 60255-27:2005 Measuring relays and protection equipment - Part 27: Product safety requirements IEC 60255-27:2005 |
|
|
|
Cenelec |
EN 60269-1:2007 Low-voltage fuses - Part 1: General requirements IEC 60269-1:2006 |
EN 60269-1:1998 + A1:2005 + EN 60269-2:1995 + A1:1998 + A2:2002 + EN 60269-3:1995 + A1:2003 Note 2.1 |
Date expired (1.3.2010) |
|
EN 60269-1:2007/A1:2009 IEC 60269-1:2006/A1:2009 |
Note 3 |
Date expired (1.7.2012) |
|
|
Cenelec |
EN 60269-4:2009 Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices IEC 60269-4:2009 |
EN 60269-4:2007 Note 2.1 |
Date expired (1.9.2012) |
|
EN 60269-4:2009/A1:2012 IEC 60269-4:2009/A1:2012 |
Note 3 |
20.6.2015 |
|
|
Cenelec |
EN 60269-6:2011 Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems IEC 60269-6:2010 |
|
|
|
Cenelec |
EN 60309-1:1999 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements IEC 60309-1:1999 |
EN 60309-1:1997 Note 2.1 |
Date expired (1.4.2002) |
|
EN 60309-1:1999/A1:2007 IEC 60309-1:1999/A1:2005 (Modified) |
Note 3 |
Date expired (1.11.2009) |
|
|
EN 60309-1:1999/A2:2012 IEC 60309-1:1999/A2:2012 |
Note 3 |
13.7.2015 |
|
|
Cenelec |
EN 60309-2:1999 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories IEC 60309-2:1999 |
EN 60309-2:1998 Note 2.1 |
Date expired (1.5.2002) |
|
EN 60309-2:1999/A1:2007 IEC 60309-2:1999/A1:2005 (Modified) |
Note 3 |
Date expired (1.11.2009) |
|
|
EN 60309-2:1999/A2:2012 IEC 60309-2:1999/A2:2012 |
Note 3 |
19.4.2015 |
|
|
Cenelec |
EN 60309-4:2007 Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock IEC 60309-4:2006 (Modified) |
|
|
|
EN 60309-4:2007/A1:2012 IEC 60309-4:2006/A1:2012 |
Note 3 |
19.4.2015 |
|
|
Cenelec |
EN 60320-1:2001 Appliance couplers for household and similar general purposes - Part 1: General requirements IEC 60320-1:2001 |
EN 60320-1:1996 + A1:1996 + A2:1998 Note 2.1 |
Date expired (1.7.2004) |
|
EN 60320-1:2001/A1:2007 IEC 60320-1:2001/A1:2007 |
Note 3 |
Date expired (1.10.2010) |
|
|
Cenelec |
EN 60320-2-1:2000 Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers IEC 60320-2-1:2000 |
EN 60320-2-1:1987 Note 2.1 |
Date expired (1.9.2003) |
|
Cenelec |
EN 60320-2-2:1998 Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment IEC 60320-2-2:1998 |
EN 60320-2-2:1991 Note 2.1 |
Date expired (1.7.2001) |
|
Cenelec |
EN 60320-2-4:2006 Appliance couplers for household and similar general purposes - Part 2-4: Appliance couplers dependent on appliance weight for engagement IEC 60320-2-4:2005 |
|
|
|
EN 60320-2-4:2006/A1:2009 IEC 60320-2-4:2005/A1:2009 |
Note 3 |
Date expired (1.11.2012) |
|
|
Cenelec |
EN 60332-1-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus IEC 60332-1-1:2004 |
EN 50265-1:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60332-1-2:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame IEC 60332-1-2:2004 |
EN 50265-2-1:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60332-1-3:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles IEC 60332-1-3:2004 |
|
|
|
Cenelec |
EN 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus IEC 60332-2-1:2004 |
EN 50265-1:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60332-2-2:2004 Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame IEC 60332-2-2:2004 |
EN 50265-2-2:1998 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60332-3-10:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus IEC 60332-3-10:2000 + A1:2008 |
EN 50266-1:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60332-3-21:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R IEC 60332-3-21:2000 (Modified) |
EN 50266-2-1:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60332-3-22:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A IEC 60332-3-22:2000 + A1:2008 |
EN 50266-2-2:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60332-3-23:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B IEC 60332-3-23:2000 + A1:2008 |
EN 50266-2-3:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60332-3-24:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C IEC 60332-3-24:2000 + A1:2008 |
EN 50266-2-4:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60332-3-25:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D IEC 60332-3-25:2000 + A1:2008 |
EN 50266-2-5:2001 Note 2.1 |
Date expired (1.8.2012) |
|
Cenelec |
EN 60335-1:1994 Safety of household and similar electrical appliances - Part 1: General requirements IEC 60335-1:1991 (Modified) |
EN 60335-1:1988 + A2:1988 + A5:1989 + A6:1989 + A51:1991 + A52:1992 + A53:1992 + A54:1992 + A55:1993 + A56:1995 Note 2.1 |
Date expired (1.9.2007) |
|
EN 60335-1:1994/A11:1995 |
Note 3 |
Date expired (1.10.2010) |
|
|
EN 60335-1:1994/A12:1996 |
Note 3 |
Date expired (1.4.1999) |
|
|
EN 60335-1:1994/A1:1996 IEC 60335-1:1991/A1:1994 (Modified) |
Note 3 |
Date expired (1.4.1999) |
|
|
EN 60335-1:1994/A13:1998 |
Note 3 |
Date expired (1.12.2000) |
|
|
EN 60335-1:1994/A14:1998 |
Note 3 |
Date expired (1.7.2001) |
|
|
EN 60335-1:1994/A15:2000 |
Note 3 |
Date expired (1.7.2001) |
|
|
EN 60335-1:1994/A2:2000 IEC 60335-1:1991/A2:1999 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60335-1:1994/A16:2001 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60335-1:1994/A2:2000/AC:2004 |
|
|
|
|
EN 60335-1:1994/AC:1995 |
|
|
|
|
EN 60335-1:1994/AC:2009 |
|
|
|
|
Cenelec |
EN 60335-1:2002 Household and similar electrical appliances - Safety - Part 1: General requirements IEC 60335-1:2001 (Modified) |
EN 60335-1:1994 and its amendments Note 2.1 |
Date expired (1.9.2007) |
|
EN 60335-1:2002/A11:2004 |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 60335-1:2002/A1:2004 IEC 60335-1:2001/A1:2004 |
Note 3 |
Date expired (1.10.2007) |
|
|
EN 60335-1:2002/A12:2006 |
Note 3 |
Date expired (1.10.2007) |
|
|
EN 60335-1:2002/A2:2006 IEC 60335-1:2001/A2:2006 |
Note 3 |
Date expired (1.7.2009) |
|
|
EN 60335-1:2002/A13:2008 |
Note 3 |
Date expired (1.7.2009) |
|
|
EN 60335-1:2002/A14:2010 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-1:2002/A15:2011 |
Note 3 |
2.5.2014 |
|
|
EN 60335-1:2002/A12:2006/AC:2007 |
|
|
|
|
EN 60335-1:2002/AC:2010 |
|
|
|
|
EN 60335-1:2002/A1:2004/AC:2007 |
|
|
|
|
EN 60335-1:2002/AC:2009 |
|
|
|
|
Cenelec |
EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements IEC 60335-1:2010 (Modified) |
EN 60335-1:2002 and its amendments Note 2.1 |
21.11.2014 |
|
Cenelec |
EN 60335-2-2:2003 Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances IEC 60335-2-2:2002 (Modified) |
EN 60335-2-2:1995 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-2:2003/A1:2004 IEC 60335-2-2:2002/A1:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60335-2-2:2003/A2:2006 IEC 60335-2-2:2002/A2:2006 (Modified) |
Note 3 |
Date expired (1.10.2009) |
|
|
EN 60335-2-2:2003/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-2:2003/A11:2010/AC:2012 |
|
|
|
|
Cenelec |
EN 60335-2-2:2010 Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances IEC 60335-2-2:2009 |
EN 60335-2-2:2003 and its amendments Note 2.1 |
1.2.2015 |
|
EN 60335-2-2:2010/A11:2012 |
Note 3 |
1.2.2015 |
|
|
EN 60335-2-2:2010/A1:2013 IEC 60335-2-2:2009/A1:2012 |
Note 3 |
20.12.2015 |
|
|
Cenelec |
EN 60335-2-3:2002 Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons IEC 60335-2-3:2002 |
EN 60335-2-3:1995 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.10.2005) |
|
EN 60335-2-3:2002/A1:2005 IEC 60335-2-3:2002/A1:2004 |
Note 3 |
Date expired (1.4.2008) |
|
|
EN 60335-2-3:2002/A2:2008 IEC 60335-2-3:2002/A2:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-3:2002/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-3:2002/A11:2010/AC:2012 |
|
|
|
|
Cenelec |
EN 60335-2-4:2002 Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors IEC 60335-2-4:2002 |
EN 60335-2-4:1995 + A1:1997 Note 2.1 |
Date expired (1.8.2007) |
|
EN 60335-2-4:2002/A1:2004 IEC 60335-2-4:2002/A1:2004 |
Note 3 |
Date expired (1.3.2007) |
|
|
EN 60335-2-4:2002/A2:2006 IEC 60335-2-4:2002/A2:2006 |
Note 3 |
Date expired (1.4.2009) |
|
|
EN 60335-2-4:2002/AC:2006 |
|
|
|
|
Cenelec |
EN 60335-2-4:2010 Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors IEC 60335-2-4:2008 (Modified) |
EN 60335-2-4:2002 and its amendments Note 2.1 |
1.11.2014 |
|
Cenelec |
EN 60335-2-5:2003 Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers IEC 60335-2-5:2002 (Modified) |
EN 60335-2-5:1995 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-5:2003/A1:2005 IEC 60335-2-5:2002/A1:2005 |
Note 3 |
Date expired (1.2.2008) |
|
|
EN 60335-2-5:2003/A2:2008 IEC 60335-2-5:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
EN 60335-2-5:2003/A11:2009 |
Note 3 |
Date expired (1.11.2011) |
|
|
EN 60335-2-5:2003/A12:2012 |
Note 3 |
9.7.2015 |
|
|
Cenelec |
EN 60335-2-6:2003 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances IEC 60335-2-6:2002 (Modified) |
EN 60335-2-6:1999 + A1:2001 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-6:2003/A1:2005 IEC 60335-2-6:2002/A1:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60335-2-6:2003/A2:2008 IEC 60335-2-6:2002/A2:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-6:2003/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-6:2003/A12:2012 |
Note 3 |
6.6.2014 |
|
|
EN 60335-2-6:2003/A13:2013 |
Note 3 |
20.11.2015 |
|
|
EN 60335-2-6:2003/AC:2007 |
|
|
|
|
EN 60335-2-6:2003/A11:2010/AC:2012 |
|
|
|
|
Cenelec |
EN 60335-2-7:2003 Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines IEC 60335-2-7:2002 (Modified) |
EN 60335-2-7:2001 Note 2.1 |
Date expired (1.8.2007) |
|
EN 60335-2-7:2003/A1:2004 IEC 60335-2-7:2002/A1:2004 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60335-2-7:2003/A2:2006 IEC 60335-2-7:2002/A2:2006 |
Note 3 |
Date expired (1.4.2009) |
|
|
EN 60335-2-7:2003/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-7:2003/A11:2010/AC:2012 |
|
|
|
|
EN 60335-2-7:2003/AC:2003 |
|
|
|
|
Cenelec |
EN 60335-2-7:2010 Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines IEC 60335-2-7:2008 (Modified) |
EN 60335-2-7:2003 and its amendments Note 2.1 |
1.11.2014 |
|
EN 60335-2-7:2010/A1:2013 IEC 60335-2-7:2008/A1:2011 (Modified) |
Note 3 |
20.11.2015 |
|
|
Cenelec |
EN 60335-2-8:2003 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances IEC 60335-2-8:2002 (Modified) |
EN 60335-2-8:1995 + A1:2001 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-8:2003/A1:2005 IEC 60335-2-8:2002/A1:2005 |
Note 3 |
Date expired (1.9.2008) |
|
|
EN 60335-2-8:2003/A2:2008 IEC 60335-2-8:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
Cenelec |
EN 60335-2-9:2003 Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances IEC 60335-2-9:2002 (Modified) |
EN 60335-2-9:1995 + A1:1998 + A2:2000 + A11:2000 + A12:2002 + A13:2002 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-9:2003/A1:2004 IEC 60335-2-9:2002/A1:2004 |
Note 3 |
Date expired (1.3.2007) |
|
|
EN 60335-2-9:2003/A2:2006 IEC 60335-2-9:2002/A2:2006 |
Note 3 |
Date expired (1.4.2009) |
|
|
EN 60335-2-9:2003/A12:2007 |
Note 3 |
Date expired (1.10.2010) |
|
|
EN 60335-2-9:2003/A13:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60335-2-9:2003/A13:2010/AC:2011 |
|
|
|
|
EN 60335-2-9:2003/A13:2010/AC:2012 |
|
|
|
|
EN 60335-2-9:2003 covers the safety objectives of directive 2006/95/EC only if, in conjunction, Commission Opinion 2000/C 104/07 is taken into account. |
|||
|
Cenelec |
EN 60335-2-10:2003 Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines IEC 60335-2-10:2002 |
EN 60335-2-10:1995 Note 2.1 |
Date expired (1.4.2006) |
|
EN 60335-2-10:2003/A1:2008 IEC 60335-2-10:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-11:2003 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers IEC 60335-2-11:2002 (Modified) |
EN 60335-2-11:2001 + A1:2001 + A11:2002 Note 2.1 |
Date expired (1.8.2007) |
|
EN 60335-2-11:2003/A1:2004 IEC 60335-2-11:2002/A1:2003 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60335-2-11:2003/A2:2006 IEC 60335-2-11:2002/A2:2006 |
Note 3 |
Date expired (1.5.2009) |
|
|
EN 60335-2-11:2003/A11:2008 |
Note 3 |
Date expired (1.7.2011) |
|
|
EN 60335-2-11:2003/AC:2003 |
|
|
|
|
Cenelec |
EN 60335-2-11:2010 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers IEC 60335-2-11:2008 (Modified) |
EN 60335-2-11:2003 and its amendments Note 2.1 |
1.4.2015 |
|
EN 60335-2-11:2010/A11:2012 |
Note 3 |
9.7.2015 |
|
|
Cenelec |
EN 60335-2-12:2003 Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances IEC 60335-2-12:2002 |
EN 60335-2-12:1995 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-12:2003/A1:2008 IEC 60335-2-12:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-13:2003 Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances IEC 60335-2-13:2002 (Modified) |
EN 60335-2-13:1995 + A2:1998 Note 2.1 |
Date expired (1.4.2006) |
|
EN 60335-2-13:2003/A1:2004 IEC 60335-2-13:2002/A1:2004 |
Note 3 |
Date expired (1.7.2007) |
|
|
EN 60335-2-13:2003/A2:2008 IEC 60335-2-13:2002/A2:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
Cenelec |
EN 60335-2-13:2010 Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances IEC 60335-2-13:2009 |
EN 60335-2-13:2003 and its amendments Note 2.1 |
1.2.2015 |
|
EN 60335-2-13:2010/A11:2012 |
Note 3 |
9.7.2015 |
|
|
Cenelec |
EN 60335-2-14:2006 Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines IEC 60335-2-14:2006 (Modified) |
EN 60335-2-14:2003 Note 2.1 |
Date expired (1.7.2009) |
|
EN 60335-2-14:2006/A1:2008 IEC 60335-2-14:2006/A1:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
EN 60335-2-14:2006/A11:2012 |
Note 3 |
23.1.2015 |
|
|
EN 60335-2-14:2006/AC:2007 |
|
|
|
|
EN 60335-2-14:2006/A11:2012/AC:2013 |
|
|
|
|
Cenelec |
EN 60335-2-15:2002 Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids IEC 60335-2-15:2002 |
EN 60335-2-15:1996 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.7.2007) |
|
EN 60335-2-15:2002/A1:2005 IEC 60335-2-15:2002/A1:2005 |
Note 3 |
Date expired (1.9.2008) |
|
|
EN 60335-2-15:2002/A2:2008 IEC 60335-2-15:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
EN 60335-2-15:2002/A11:2012 |
Note 3 |
23.1.2015 |
|
|
EN 60335-2-15:2002/AC:2006 |
|
|
|
|
EN 60335-2-15:2002/A11:2012/AC:2013 |
|
|
|
|
Cenelec |
EN 60335-2-16:2003 Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers IEC 60335-2-16:2002 (Modified) |
EN 60335-2-16:1996 Note 2.1 |
Date expired (1.7.2006) |
|
EN 60335-2-16:2003/A1:2008 IEC 60335-2-16:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-16:2003/A2:2012 IEC 60335-2-16:2002/A2:2011 |
Note 3 |
18.10.2014 |
|
|
Cenelec |
EN 60335-2-17:2002 Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances IEC 60335-2-17:2002 |
EN 60335-2-17:1999 Note 2.1 |
Date expired (1.11.2005) |
|
EN 60335-2-17:2002/A1:2006 IEC 60335-2-17:2002/A1:2006 |
Note 3 |
Date expired (1.3.2009) |
|
|
EN 60335-2-17:2002/A2:2009 IEC 60335-2-17:2002/A2:2008 (Modified) |
Note 3 |
Date expired (1.9.2013) |
|
|
Cenelec |
EN 60335-2-17:2013 Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances IEC 60335-2-17:2012 |
EN 60335-2-17:2002 and its amendments Note 2.1 |
30.4.2015 |
|
Cenelec |
EN 60335-2-21:2003 Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters IEC 60335-2-21:2002 (Modified) |
EN 60335-2-21:1999 + A1:2000 + A11:2002 + A12:2002 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-21:2003/A1:2005 IEC 60335-2-21:2002/A1:2004 |
Note 3 |
Date expired (1.11.2007) |
|
|
EN 60335-2-21:2003/A2:2008 IEC 60335-2-21:2002/A2:2008 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60335-2-21:2003/AC:2010 |
|
|
|
|
EN 60335-2-21:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-23:2003 Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care IEC 60335-2-23:2003 |
EN 60335-2-23:1996 + A1:2001 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-23:2003/A1:2008 IEC 60335-2-23:2003/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-23:2003/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-23:2003/A11:2010/AC:2012 |
|
|
|
|
Cenelec |
EN 60335-2-24:2003 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers IEC 60335-2-24:2002 |
EN 60335-2-24:2000 + A11:2004 Note 2.1 |
Date expired (1.8.2007) |
|
EN 60335-2-24:2003/A11:2004 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60335-2-24:2003/A1:2005 IEC 60335-2-24:2002/A1:2005 |
Note 3 |
Date expired (1.3.2008) |
|
|
EN 60335-2-24:2003/A2:2007 IEC 60335-2-24:2002/A2:2007 |
Note 3 |
Date expired (1.2.2010) |
|
|
EN 60335-2-24:2003/A12:2009 |
Note 3 |
Date expired (1.11.2012) |
|
|
EN 60335-2-24:2003/AC:2010 |
|
|
|
|
Cenelec |
EN 60335-2-24:2010 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers IEC 60335-2-24:2010 |
EN 60335-2-24:2003 and its amendments Note 2.1 |
1.3.2015 |
|
Cenelec |
EN 60335-2-25:2002 Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens IEC 60335-2-25:2002 |
EN 60335-2-25:1996 + A1:2000 Note 2.1 |
Date expired (1.10.2005) |
|
EN 60335-2-25:2002/A1:2005 IEC 60335-2-25:2002/A1:2005 |
Note 3 |
Date expired (1.6.2008) |
|
|
EN 60335-2-25:2002/A2:2006 IEC 60335-2-25:2002/A2:2006 |
Note 3 |
Date expired (1.7.2009) |
|
|
EN 60335-2-25:2002/A11:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
EN 60335-2-25:2002/A11:2010/AC:2012 |
|
|
|
|
Cenelec |
EN 60335-2-25:2012 Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens IEC 60335-2-25:2010 (Modified) |
EN 60335-2-25:2002 and its amendments Note 2.1 |
28.11.2014 |
|
Cenelec |
EN 60335-2-26:2003 Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks IEC 60335-2-26:2002 |
EN 60335-2-26:1996 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-26:2003/A1:2008 IEC 60335-2-26:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-27:2010 Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation IEC 60335-2-27:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) |
EN 60335-2-27:2003 + A1:2008 + A2:2008 |
Date expired (1.10.2011) |
|
EN 60335-2-27:2010/AC:2010 |
|
|
|
|
Cenelec |
EN 60335-2-28:2003 Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines IEC 60335-2-28:2002 (Modified) |
EN 60335-2-28:1996 Note 2.1 |
Date expired (1.4.2006) |
|
EN 60335-2-28:2003/A1:2008 IEC 60335-2-28:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-29:2004 Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers IEC 60335-2-29:2002 + A1:2004 |
EN 60335-2-29:1996 + A11:1997 Note 2.1 |
Date expired (1.6.2007) |
|
EN 60335-2-29:2004/A2:2010 IEC 60335-2-29:2002/A2:2009 |
Note 3 |
1.2.2015 |
|
|
Cenelec |
EN 60335-2-30:2003 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters IEC 60335-2-30:2002 (Modified) |
EN 60335-2-30:1997 + A1:2000 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-30:2003/A1:2004 IEC 60335-2-30:2002/A1:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60335-2-30:2003/A2:2007 IEC 60335-2-30:2002/A2:2007 |
Note 3 |
Date expired (1.5.2010) |
|
|
Cenelec |
EN 60335-2-30:2009 Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters IEC 60335-2-30:2009 |
EN 60335-2-30:2003 and its amendments Note 2.1 |
1.12.2014 |
|
EN 60335-2-30:2009/A11:2012 |
Note 3 |
20.2.2015 |
|
|
EN 60335-2-30:2009/AC:2010 |
|
|
|
|
Cenelec |
EN 60335-2-31:2003 Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors IEC 60335-2-31:2002 |
EN 60335-2-31:1997 + A1:1999 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-31:2003/A1:2006 IEC 60335-2-31:2002/A1:2006 |
Note 3 |
Date expired (1.5.2009) |
|
|
EN 60335-2-31:2003/A2:2009 IEC 60335-2-31:2002/A2:2008 |
Note 3 |
1.3.2014 |
|
|
EN 60335-2-31:2003/AC:2005 |
|
|
|
|
Cenelec |
EN 60335-2-32:2003 Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances IEC 60335-2-32:2002 |
EN 60335-2-32:1995 + A1:2000 Note 2.1 |
Date expired (1.4.2006) |
|
EN 60335-2-32:2003/A1:2008 IEC 60335-2-32:2002/A1:2008 |
Note 3 |
Date expired (1.7.2013) |
|
|
Cenelec |
EN 60335-2-34:2002 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors IEC 60335-2-34:2002 |
EN 60335-2-34:2000 + A11:2004 Note 2.1 |
Date expired (1.12.2005) |
|
EN 60335-2-34:2002/A11:2004 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60335-2-34:2002/A1:2005 IEC 60335-2-34:2002/A1:2004 |
Note 3 |
Date expired (1.2.2008) |
|
|
EN 60335-2-34:2002/A2:2009 IEC 60335-2-34:2002/A2:2008 |
Note 3 |
Date expired (1.12.2011) |
|
|
Cenelec |
EN 60335-2-34:2013 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors IEC 60335-2-34:2012 |
EN 60335-2-34:2002 and its amendments Note 2.1 |
27.6.2015 |
|
Cenelec |
EN 60335-2-35:2002 Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters IEC 60335-2-35:2002 |
EN 60335-2-35:1998 + A1:2000 Note 2.1 |
Date expired (1.11.2005) |
|
EN 60335-2-35:2002/A1:2007 IEC 60335-2-35:2002/A1:2006 |
Note 3 |
Date expired (1.11.2009) |
|
|
EN 60335-2-35:2002/A2:2011 IEC 60335-2-35:2002/A2:2009 (Modified) |
Note 3 |
24.1.2014 |
|
|
EN 60335-2-35:2002/AC:2005 |
|
|
|
|
Cenelec |
EN 60335-2-36:2002 Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements IEC 60335-2-36:2002 |
EN 60335-2-36:2000 Note 2.1 |
Date expired (1.12.2005) |
|
EN 60335-2-36:2002/A1:2004 IEC 60335-2-36:2002/A1:2004 |
Note 3 |
Date expired (1.7.2007) |
|
|
EN 60335-2-36:2002/A2:2008 IEC 60335-2-36:2002/A2:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60335-2-36:2002/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-36:2002/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-37:2002 Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers IEC 60335-2-37:2002 |
EN 60335-2-37:2000 Note 2.1 |
Date expired (1.12.2005) |
|
EN 60335-2-37:2002/A1:2008 IEC 60335-2-37:2002/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60335-2-37:2002/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-37:2002/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-38:2003 Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills IEC 60335-2-38:2002 |
EN 60335-2-38:2000 Note 2.1 |
Date expired (1.2.2006) |
|
EN 60335-2-38:2003/A1:2008 IEC 60335-2-38:2002/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60335-2-38:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-39:2003 Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans IEC 60335-2-39:2002 |
EN 60335-2-39:2000 Note 2.1 |
Date expired (1.2.2006) |
|
EN 60335-2-39:2003/A1:2004 IEC 60335-2-39:2002/A1:2004 |
Note 3 |
Date expired (1.7.2007) |
|
|
EN 60335-2-39:2003/A2:2008 IEC 60335-2-39:2002/A2:2008 |
Note 3 |
Date expired (1.7.2011) |
|
|
EN 60335-2-39:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-40:2003 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers IEC 60335-2-40:2002 (Modified) |
EN 60335-2-40:1997 + A1:2000 + A11:2004 Note 2.1 |
Date expired (1.3.2007) |
|
EN 60335-2-40:2003/A11:2004 |
Note 3 |
Date expired (1.3.2007) |
|
|
EN 60335-2-40:2003/A12:2005 |
Note 3 |
Date expired (1.11.2007) |
|
|
EN 60335-2-40:2003/A1:2006 IEC 60335-2-40:2002/A1:2005 (Modified) |
Note 3 |
Date expired (1.9.2008) |
|
|
EN 60335-2-40:2003/A2:2009 IEC 60335-2-40:2002/A2:2005 (Modified) |
Note 3 |
Date expired (1.3.2012) |
|
|
EN 60335-2-40:2003/A13:2012 |
Note 3 |
11.7.2014 |
|
|
EN 60335-2-40:2003/AC:2006 |
|
|
|
|
EN 60335-2-40:2003/AC:2010 |
|
|
|
|
EN 60335-2-40:2003/A13:2012/AC:2013 |
|
|
|
|
Cenelec |
EN 60335-2-41:2003 Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps IEC 60335-2-41:2002 |
EN 60335-2-41:1996 + A1:2001 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-41:2003/A1:2004 IEC 60335-2-41:2002/A1:2004 |
Note 3 |
Date expired (1.3.2007) |
|
|
EN 60335-2-41:2003/A2:2010 IEC 60335-2-41:2002/A2:2009 |
Note 3 |
1.2.2015 |
|
|
Cenelec |
EN 60335-2-42:2003 Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens IEC 60335-2-42:2002 |
EN 60335-2-42:2000 Note 2.1 |
Date expired (1.2.2006) |
|
EN 60335-2-42:2003/A1:2008 IEC 60335-2-42:2002/A1:2008 |
Note 3 |
Date expired (1.7.2011) |
|
|
EN 60335-2-42:2003/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-42:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-43:2003 Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails IEC 60335-2-43:2002 |
EN 60335-2-43:1997 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-43:2003/A1:2006 IEC 60335-2-43:2002/A1:2005 |
Note 3 |
Date expired (1.11.2008) |
|
|
EN 60335-2-43:2003/A2:2008 IEC 60335-2-43:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
Cenelec |
EN 60335-2-44:2002 Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers IEC 60335-2-44:2002 |
EN 60335-2-44:1997 Note 2.1 |
Date expired (1.11.2005) |
|
EN 60335-2-44:2002/A1:2008 IEC 60335-2-44:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-44:2002/A2:2012 IEC 60335-2-44:2002/A2:2011 |
Note 3 |
4.10.2014 |
|
|
Cenelec |
EN 60335-2-45:2002 Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances IEC 60335-2-45:2002 |
EN 60335-2-45:1996 Note 2.1 |
Date expired (1.12.2005) |
|
EN 60335-2-45:2002/A1:2008 IEC 60335-2-45:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-45:2002/A2:2012 IEC 60335-2-45:2002/A2:2011 |
Note 3 |
4.10.2014 |
|
|
Cenelec |
EN 60335-2-47:2003 Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans IEC 60335-2-47:2002 |
EN 60335-2-47:2000 Note 2.1 |
Date expired (1.2.2006) |
|
EN 60335-2-47:2003/A1:2008 IEC 60335-2-47:2002/A1:2008 |
Note 3 |
Date expired (1.6.2011) |
|
|
EN 60335-2-47:2003/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-47:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-48:2003 Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters IEC 60335-2-48:2002 |
EN 60335-2-48:2000 Note 2.1 |
Date expired (1.2.2006) |
|
EN 60335-2-48:2003/A1:2008 IEC 60335-2-48:2002/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60335-2-48:2003/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-48:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-49:2003 Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm IEC 60335-2-49:2002 |
EN 60335-2-49:2000 Note 2.1 |
Date expired (1.2.2006) |
|
EN 60335-2-49:2003/A1:2008 IEC 60335-2-49:2002/A1:2008 |
Note 3 |
Date expired (1.7.2011) |
|
|
EN 60335-2-49:2003/A11:2012 |
Note 3 |
21.12.2014 |
|
|
EN 60335-2-49:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-50:2003 Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie IEC 60335-2-50:2002 |
EN 60335-2-50:2000 Note 2.1 |
Date expired (1.2.2006) |
|
EN 60335-2-50:2003/A1:2008 IEC 60335-2-50:2002/A1:2007 |
Note 3 |
Date expired (1.2.2011) |
|
|
EN 60335-2-50:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-51:2003 Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations IEC 60335-2-51:2002 |
EN 60335-2-51:1997 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-51:2003/A1:2008 IEC 60335-2-51:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-51:2003/A2:2012 IEC 60335-2-51:2002/A2:2011 |
Note 3 |
18.10.2014 |
|
|
Cenelec |
EN 60335-2-52:2003 Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances IEC 60335-2-52:2002 |
EN 60335-2-52:1996 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-52:2003/A1:2008 IEC 60335-2-52:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-52:2003/A11:2010 |
Note 3 |
Date expired (14.4.2013) |
|
|
EN 60335-2-52:2003/A11:2010/AC:2012 |
|
|
|
|
Cenelec |
EN 60335-2-53:2003 Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances IEC 60335-2-53:2002 |
EN 60335-2-53:1997 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-53:2003/A1:2007 IEC 60335-2-53:2002/A1:2007 |
Note 3 |
Date expired (1.2.2010) |
|
|
Cenelec |
EN 60335-2-53:2011 Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins IEC 60335-2-53:2011 |
EN 60335-2-53:2003 and its amendment Note 2.1 |
25.5.2014 |
|
Cenelec |
EN 60335-2-54:2003 Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam IEC 60335-2-54:2002 |
EN 60335-2-54:1997 + A1:1999 + A11:1998 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-54:2003/A1:2004 IEC 60335-2-54:2002/A1:2004 |
Note 3 |
Date expired (1.7.2007) |
|
|
EN 60335-2-54:2003/A11:2006 |
Note 3 |
Date expired (1.11.2008) |
|
|
EN 60335-2-54:2003/A2:2007 IEC 60335-2-54:2002/A2:2007 |
Note 3 |
Date expired (1.2.2010) |
|
|
Cenelec |
EN 60335-2-54:2008 Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam IEC 60335-2-54:2008 |
EN 60335-2-54:2003 and its amendments Note 2.1 |
Date expired (1.10.2013) |
|
EN 60335-2-54:2008/A11:2012 |
Note 3 |
20.2.2015 |
|
|
Cenelec |
EN 60335-2-55:2003 Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds IEC 60335-2-55:2002 |
EN 60335-2-55:1997 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-55:2003/A1:2008 IEC 60335-2-55:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-56:2003 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances IEC 60335-2-56:2002 |
EN 60335-2-56:1997 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-56:2003/A1:2008 IEC 60335-2-56:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-59:2003 Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers IEC 60335-2-59:2002 (Modified) |
EN 60335-2-59:1997 + A1:2001 + A11:2000 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-59:2003/A1:2006 IEC 60335-2-59:2002/A1:2006 |
Note 3 |
Date expired (1.3.2009) |
|
|
EN 60335-2-59:2003/A2:2009 IEC 60335-2-59:2002/A2:2009 |
Note 3 |
1.10.2014 |
|
|
Cenelec |
EN 60335-2-60:2003 Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas IEC 60335-2-60:2002 |
EN 60335-2-60:1997 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-60:2003/A1:2005 IEC 60335-2-60:2002/A1:2004 |
Note 3 |
Date expired (1.2.2008) |
|
|
EN 60335-2-60:2003/A2:2008 IEC 60335-2-60:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
EN 60335-2-60:2003/A11:2010 |
Note 3 |
Date expired (1.11.2012) |
|
|
EN 60335-2-60:2003/A12:2010 |
Note 3 |
Date expired (1.11.2010) |
|
|
Cenelec |
EN 60335-2-61:2003 Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters IEC 60335-2-61:2002 |
EN 60335-2-61:1996 + A1:2000 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-61:2003/A1:2005 IEC 60335-2-61:2002/A1:2005 |
Note 3 |
Date expired (1.5.2008) |
|
|
EN 60335-2-61:2003/A2:2008 IEC 60335-2-61:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
Cenelec |
EN 60335-2-62:2003 Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks IEC 60335-2-62:2002 |
EN 60335-2-62:1997 + A1:1999 + A2:2000 Note 2.1 |
Date expired (1.2.2006) |
|
EN 60335-2-62:2003/A1:2008 IEC 60335-2-62:2002/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60335-2-62:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-65:2003 Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances IEC 60335-2-65:2002 |
EN 60335-2-65:1995 + A1:2001 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-65:2003/A1:2008 IEC 60335-2-65:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-65:2003/A11:2012 |
Note 3 |
21.12.2014 |
|
|
Cenelec |
EN 60335-2-66:2003 Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters IEC 60335-2-66:2002 |
EN 60335-2-66:1995 + A1:2001 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-66:2003/A1:2008 IEC 60335-2-66:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-66:2003/A2:2012 IEC 60335-2-66:2002/A2:2011 |
Note 3 |
4.10.2014 |
|
|
Cenelec |
EN 60335-2-71:2003 Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals IEC 60335-2-71:2002 (Modified) |
EN 60335-2-71:1995 + A1:1998 + A2:1999 Note 2.1 |
Date expired (1.6.2006) |
|
EN 60335-2-71:2003/A1:2007 IEC 60335-2-71:2002/A1:2007 |
Note 3 |
Date expired (1.4.2010) |
|
|
Cenelec |
EN 60335-2-73:2003 Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters IEC 60335-2-73:2002 (Modified) |
EN 60335-2-73:1996 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-73:2003/A1:2006 IEC 60335-2-73:2002/A1:2006 |
Note 3 |
Date expired (1.3.2009) |
|
|
EN 60335-2-73:2003/A2:2009 IEC 60335-2-73:2002/A2:2009 |
Note 3 |
1.10.2014 |
|
|
Cenelec |
EN 60335-2-74:2003 Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters IEC 60335-2-74:2002 |
EN 60335-2-74:1996 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-74:2003/A1:2006 IEC 60335-2-74:2002/A1:2006 |
Note 3 |
Date expired (1.6.2009) |
|
|
EN 60335-2-74:2003/A2:2009 IEC 60335-2-74:2002/A2:2009 |
Note 3 |
1.10.2014 |
|
|
Cenelec |
EN 60335-2-75:2004 Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines IEC 60335-2-75:2002 (Modified) |
EN 60335-2-63:1993 + EN 60335-2-75:2002 Note 2.1 |
Date expired (1.3.2007) |
|
EN 60335-2-75:2004/A1:2005 IEC 60335-2-75:2002/A1:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60335-2-75:2004/A11:2006 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60335-2-75:2004/A2:2008 IEC 60335-2-75:2002/A2:2008 |
Note 3 |
Date expired (1.8.2011) |
|
|
EN 60335-2-75:2004/A12:2010 |
Note 3 |
Date expired (1.11.2010) |
|
|
Cenelec |
EN 60335-2-78:2003 Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues IEC 60335-2-78:2002 |
EN 60335-2-78:1997 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-78:2003/A1:2008 IEC 60335-2-78:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-80:2003 Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans IEC 60335-2-80:2002 |
EN 60335-2-80:1997 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-80:2003/A1:2004 IEC 60335-2-80:2002/A1:2004 |
Note 3 |
Date expired (1.3.2007) |
|
|
EN 60335-2-80:2003/A2:2009 IEC 60335-2-80:2002/A2:2008 |
Note 3 |
1.3.2014 |
|
|
Cenelec |
EN 60335-2-81:2003 Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats IEC 60335-2-81:2002 |
EN 60335-2-81:1997 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60335-2-81:2003/A1:2007 IEC 60335-2-81:2002/A1:2007 |
Note 3 |
Date expired (1.2.2010) |
|
|
EN 60335-2-81:2003/A2:2012 IEC 60335-2-81:2002/A2:2011 |
Note 3 |
18.10.2014 |
|
|
Cenelec |
EN 60335-2-82:2003 Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines IEC 60335-2-82:2002 |
EN 60335-2-82:2000 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-82:2003/A1:2008 IEC 60335-2-82:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-83:2002 Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage IEC 60335-2-83:2001 |
|
|
|
EN 60335-2-83:2002/A1:2008 IEC 60335-2-83:2001/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-84:2003 Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets IEC 60335-2-84:2002 |
EN 60335-2-84:1998 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-84:2003/A1:2008 IEC 60335-2-84:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-85:2003 Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers IEC 60335-2-85:2002 |
EN 60335-2-85:1998 + A1:2000 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-85:2003/A1:2008 IEC 60335-2-85:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-86:2003 Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines IEC 60335-2-86:2002 (Modified) |
EN 60335-2-86:2000 Note 2.1 |
Date expired (1.8.2007) |
|
EN 60335-2-86:2003/A1:2005 IEC 60335-2-86:2002/A1:2005 |
Note 3 |
Date expired (1.5.2008) |
|
|
Cenelec |
EN 60335-2-87:2002 Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment IEC 60335-2-87:2002 |
EN 60335-2-87:1999 Note 2.1 |
Date expired (1.10.2005) |
|
EN 60335-2-87:2002/A1:2007 IEC 60335-2-87:2002/A1:2007 |
Note 3 |
Date expired (1.4.2010) |
|
|
Cenelec |
EN 60335-2-88:2002 Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems IEC 60335-2-88:2002 |
EN 60335-2-88:1997 Note 2.1 |
Date expired (1.12.2005) |
|
Cenelec |
EN 60335-2-90:2006 Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens IEC 60335-2-90:2006 |
EN 60335-2-90:2002 + A1:2003 Note 2.1 |
Date expired (1.3.2009) |
|
EN 60335-2-90:2006/A1:2010 IEC 60335-2-90:2006/A1:2010 |
Note 3 |
Date expired (1.9.2013) |
|
|
Cenelec |
EN 60335-2-96:2002 Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating IEC 60335-2-96:2002 |
|
|
|
EN 60335-2-96:2002/A1:2004 IEC 60335-2-96:2002/A1:2003 |
Note 3 |
Date expired (1.12.2006) |
|
|
EN 60335-2-96:2002/A2:2009 IEC 60335-2-96:2002/A2:2008 |
Note 3 |
1.12.2013 |
|
|
Cenelec |
EN 60335-2-97:2006 Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment IEC 60335-2-97:2002 (Modified) + A1:2004 (Modified) |
EN 60335-2-97:2000 + A11:2006 Note 2.1 |
Date expired (1.4.2009) |
|
EN 60335-2-97:2006/A11:2008 |
Note 3 |
Date expired (1.10.2011) |
|
|
EN 60335-2-97:2006/A2:2010 IEC 60335-2-97:2002/A2:2008 (Modified) |
Note 3 |
Date expired (1.11.2012) |
|
|
Cenelec |
EN 60335-2-98:2003 Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers IEC 60335-2-98:2002 |
EN 60335-2-98:1997 + A1:2000 Note 2.1 |
Date expired (1.5.2006) |
|
EN 60335-2-98:2003/A1:2005 IEC 60335-2-98:2002/A1:2004 |
Note 3 |
Date expired (1.12.2007) |
|
|
EN 60335-2-98:2003/A2:2008 IEC 60335-2-98:2002/A2:2008 |
Note 3 |
Date expired (1.8.2013) |
|
|
Cenelec |
EN 60335-2-101:2002 Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers IEC 60335-2-101:2002 |
|
|
|
EN 60335-2-101:2002/A1:2008 IEC 60335-2-101:2002/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
Cenelec |
EN 60335-2-102:2006 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections IEC 60335-2-102:2004 (Modified) |
EN 50165:1997 + A1:2001 Note 2.1 |
Date expired (1.4.2009) |
|
EN 60335-2-102:2006/A1:2010 IEC 60335-2-102:2004/A1:2008 (Modified) |
Note 3 |
1.11.2014 |
|
|
Cenelec |
EN 60335-2-105:2005 Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets IEC 60335-2-105:2004 |
|
|
|
EN 60335-2-105:2005/A1:2008 IEC 60335-2-105:2004/A1:2008 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 60335-2-105:2005/A11:2010 |
Note 3 |
Date expired (1.11.2010) |
|
|
Cenelec |
EN 60335-2-106:2007 Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings IEC 60335-2-106:2007 |
|
|
|
Cenelec |
EN 60335-2-108:2008 Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers IEC 60335-2-108:2008 (Modified) |
|
|
|
Cenelec |
EN 60335-2-109:2010 Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances IEC 60335-2-109:2010 |
|
|
|
Cenelec |
EN 60358-1:2012 Coupling capacitors and capacitor dividers - Part 1: General rules IEC 60358-1:2012 |
HD 597 S1:1992 Note 2.1 |
17.7.2015 |
|
EN 60358-1:2012/AC:2013 |
|
|
|
|
Cenelec |
EN 60360:1998 Standard method of measurement of lamp cap temperature rise IEC 60360:1998 |
EN 60360:1989 + A1:1994 + A2:1997 Note 2.1 |
Date expired (1.5.2001) |
|
Cenelec |
EN 60399:2004 Barrel thread for lampholders with shade holder ring IEC 60399:2004 |
EN 60399:1993 + A1:1997 + A2:1999 Note 2.1 |
Date expired (1.10.2007) |
|
EN 60399:2004/A1:2008 IEC 60399:2004/A1:2008 |
Note 3 |
Date expired (1.8.2011) |
|
|
Cenelec |
EN 60400:2008 Lampholders for tubular fluorescent lamps and starterholders IEC 60400:2008 |
EN 60400:2000 + A1:2002 + A2:2004 |
Date expired (1.8.2011) |
|
EN 60400:2008/A1:2011 IEC 60400:2008/A1:2011 |
Note 3 |
25.5.2014 |
|
|
Cenelec |
EN 60423:2007 Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings IEC 60423:2007 |
|
|
|
Cenelec |
EN 60432-1:2000 Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes IEC 60432-1:1999 (Modified) |
EN 60432-1:1994 + A1:1997 + A2:1997 Note 2.1 |
Date expired (1.1.2003) |
|
EN 60432-1:2000/A1:2005 IEC 60432-1:1999/A1:2005 |
Note 3 |
Date expired (1.4.2008) |
|
|
EN 60432-1:2000/A2:2012 IEC 60432-1:1999/A2:2011 |
Note 3 |
11.1.2015 |
|
|
Cenelec |
EN 60432-2:2000 Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes IEC 60432-2:1999 (Modified) |
EN 60432-2:1994 + A1:1996 + A2:1997 Note 2.1 |
Date expired (1.1.2003) |
|
EN 60432-2:2000/A1:2005 IEC 60432-2:1999/A1:2005 (Modified) |
Note 3 |
Date expired (1.9.2008) |
|
|
EN 60432-2:2000/A2:2012 IEC 60432-2:1999/A2:2012 |
Note 3 |
26.4.2015 |
|
|
Cenelec |
EN 60432-3:2003 Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) IEC 60432-3:2002 |
|
|
|
EN 60432-3:2003/A1:2005 IEC 60432-3:2002/A1:2005 |
Note 3 |
Date expired (1.4.2008) |
|
|
EN 60432-3:2003/A2:2008 IEC 60432-3:2002/A2:2008 |
Note 3 |
Date expired (1.5.2011) |
|
|
Cenelec |
EN 60432-3:2013 Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) IEC 60432-3:2012 |
EN 60432-3:2003 and its amendments Note 2.1 |
8.8.2015 |
|
Cenelec |
EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies IEC 60439-1:1999 |
EN 60439-1:1994 + A1:1995 + A2:1997 + A11:1996 Note 2.1 |
Date expired (1.8.2002) |
|
EN 60439-1:1999/A1:2004 IEC 60439-1:1999/A1:2004 |
Note 3 |
Date expired (1.4.2007) |
|
|
Cenelec |
EN 60439-2:2000 Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways) IEC 60439-2:2000 |
EN 60439-2:1993 Note 2.1 |
Date expired (1.4.2003) |
|
EN 60439-2:2000/A1:2005 IEC 60439-2:2000/A1:2005 |
Note 3 |
Date expired (1.10.2008) |
|
|
Cenelec |
EN 60439-3:1991 Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards IEC 60439-3:1990 (Modified) |
|
|
|
EN 60439-3:1991/A1:1994 IEC 60439-3:1990/A1:1993 |
Note 3 |
Date expired (1.12.1994) |
|
|
EN 60439-3:1991/A2:2001 IEC 60439-3:1990/A2:2001 |
Note 3 |
Date expired (1.5.2004) |
|
|
EN 60439-3:1991/AC:2009 |
|
|
|
|
Cenelec |
EN 60439-4:2004 Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) IEC 60439-4:2004 |
EN 60439-4:1991 + A1:1995 + A2:1999 + A11:2004 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60439-5:2006 Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks IEC 60439-5:2006 |
EN 50300:2004 + EN 60439-5:1996 + A1:1998 Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 60446:2007 Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or alphanumerics IEC 60446:2007 |
EN 60446:1999 Note 2.1 |
Date expired (1.6.2010) |
|
Cenelec |
EN 60477:1997 Laboratory d.c. resistors IEC 60477:1974 |
|
|
|
EN 60477:1997/A1:1997 IEC 60477:1974/A1:1997 |
Note 3 |
Date expired (1.9.1998) |
|
|
Cenelec |
EN 60477-2:1997 Laboratory resistors - Part 2: Laboratory a.c. resistors IEC 60477-2:1979 |
|
|
|
EN 60477-2:1997/A1:1997 IEC 60477-2:1979/A1:1997 |
Note 3 |
Date expired (1.9.1998) |
|
|
Cenelec |
EN 60519-1:2003 Safety in electroheat installations - Part 1: General requirements IEC 60519-1:2003 |
EN 60519-1:1993 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 60519-1:2011 Safety in electroheating installations - Part 1: General requirements IEC 60519-1:2010 |
EN 60519-1:2003 Note 2.1 |
3.1.2014 |
|
Cenelec |
EN 60519-2:2006 Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment IEC 60519-2:2006 |
EN 60519-2:1993 Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 60519-3:2005 Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations IEC 60519-3:2005 |
EN 60519-3:1995 Note 2.1 |
Date expired (1.4.2008) |
|
Cenelec |
EN 60519-4:2006 Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations IEC 60519-4:2006 |
EN 60519-4:1997 + A1:2000 Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 60519-4:2013 Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations IEC 60519-4:2013 |
EN 60519-4:2006 Note 2.1 |
24.7.2016 |
|
Cenelec |
EN 60519-6:2002 Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment IEC 60519-6:2002 |
|
|
|
Cenelec |
EN 60519-6:2011 Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment IEC 60519-6:2011 |
EN 60519-6:2002 Note 2.1 |
3.3.2014 |
|
Cenelec |
EN 60519-7:2008 Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns IEC 60519-7:2008 |
|
|
|
Cenelec |
EN 60519-8:2005 Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces IEC 60519-8:2005 |
|
|
|
Cenelec |
EN 60519-9:2005 Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations IEC 60519-9:2005 |
EN 60519-9:1995 Note 2.1 |
Date expired (1.10.2008) |
|
Cenelec |
EN 60519-10:2005 Safety in electroheat installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications IEC 60519-10:2005 |
|
|
|
Cenelec |
EN 60519-10:2013 Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications IEC 60519-10:2013 |
EN 60519-10:2005 Note 2.1 |
29.3.2016 |
|
Cenelec |
EN 60519-12:2013 Safety in electroheating installations - Part 12: Particular requirements for infrared electroheating installations IEC 60519-12:2013 |
|
|
|
Cenelec |
EN 60519-21:2009 Safety in electroheat installations - Part 21: Particular requirements for resistance heating equipment - Heating and melting glass equipment IEC 60519-21:2008 |
EN 60519-21:1998 Note 2.1 |
Date expired (1.12.2011) |
|
Cenelec |
EN 60523:1993 Direct-current potentiometers IEC 60523:1975 + A1:1979 |
|
|
|
EN 60523:1993/A2:1997 IEC 60523:1975/A2:1997 |
Note 3 |
Date expired (1.7.1998) |
|
|
Cenelec |
EN 60524:1993 Direct-current resistive volt ratio boxes IEC 60524:1975 + A1:1981 |
|
|
|
EN 60524:1993/A2:1997 IEC 60524:1975/A2:1997 |
Note 3 |
Date expired (1.7.1998) |
|
|
Cenelec |
EN 60529:1991 Degrees of protection provided by enclosures (IP Code) IEC 60529:1989 |
|
|
|
EN 60529:1991/A1:2000 IEC 60529:1989/A1:1999 |
Note 3 |
Date expired (1.1.2003) |
|
|
EN 60529:1991/AC:1993 |
|
|
|
|
Cenelec |
EN 60564:1993 D.C. bridges for measuring resistance IEC 60564:1977 + A1:1981 |
|
|
|
EN 60564:1993/A2:1997 IEC 60564:1977/A2:1997 |
Note 3 |
Date expired (1.7.1998) |
|
|
Cenelec |
EN 60570:2003 Electrical supply track systems for luminaires IEC 60570:2003 (Modified) |
EN 60570:1996 + A1:1998 + A2:2000 + EN 60570-2-1:1994 + A1:1996 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 60598-1:2008 Luminaires - Part 1: General requirements and tests IEC 60598-1:2008 (Modified) |
EN 60598-1:2004 + A1:2006 Note 2.1 |
Date expired (12.4.2012) |
|
EN 60598-1:2008/A11:2009 |
Note 3 |
Date expired (1.11.2009) |
|
|
Cenelec |
EN 60598-2-1:1989 Luminaires - Part 2: Particular requirements - Section 1: Fixed general purpose luminaires IEC 60598-2-1:1979 + A1:1987 |
|
|
|
Cenelec |
EN 60598-2-2:1996 Luminaires - Part 2: Particular requirements - Section 2: Recessed luminaires IEC 60598-2-2:1996 |
EN 60598-2-2:1989 + A2:1996 Note 2.1 |
Date expired (1.4.1997) |
|
EN 60598-2-2:1996/A1:1997 IEC 60598-2-2:1996/A1:1997 |
Note 3 |
Date expired (1.12.1997) |
|
|
Cenelec |
EN 60598-2-2:2012 Luminaires - Part 2-2: Particular requirements - Recessed luminaires IEC 60598-2-2:2011 |
EN 60598-2-2:1996 and its amendment Note 2.1 |
13.12.2014 |
|
Cenelec |
EN 60598-2-3:2003 Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting IEC 60598-2-3:2002 |
EN 60598-2-3:1994 + A1:1997 + A2:2001 Note 2.1 |
Date expired (1.2.2010) |
|
EN 60598-2-3:2003/A1:2011 IEC 60598-2-3:2002/A1:2011 |
Note 3 |
19.5.2014 |
|
|
EN 60598-2-3:2003/AC:2005 |
|
|
|
|
Cenelec |
EN 60598-2-4:1997 Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires IEC 60598-2-4:1997 |
EN 60598-2-4:1989 + A3:1993 Note 2.1 |
Date expired (1.4.1998) |
|
Cenelec |
EN 60598-2-5:1998 Luminaires - Part 2-5: Particular requirements - Floodlights IEC 60598-2-5:1998 |
EN 60598-2-5:1989 + A2:1994 Note 2.1 |
Date expired (1.4.2005) |
|
EN 60598-2-5:1998/AC:1998 |
|
|
|
|
Cenelec |
EN 60598-2-6:1994 Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers or convertors for filament lamps IEC 60598-2-6:1994 |
EN 60598-2-6:1989 + A2:1991 Note 2.1 |
Date expired (1.7.1995) |
|
EN 60598-2-6:1994/A1:1997 IEC 60598-2-6:1994/A1:1996 |
Note 3 |
Date expired (1.9.1997) |
|
|
Cenelec |
EN 60598-2-7:1989 Luminaires - Part 2: Particular requirements - Section 7: Portable luminaires for garden use IEC 60598-2-7:1982 (Modified) + A1:1987 (Modified) |
|
|
|
EN 60598-2-7:1989/A2:1996 IEC 60598-2-7:1982/A2:1994 (Modified) |
Note 3 |
Date expired (1.3.1997) |
|
|
EN 60598-2-7:1989/A13:1997 |
Note 3 |
Date expired (1.3.1997) |
|
|
EN 60598-2-7:1989/A2:1996/AC:1999 |
|
|
|
|
Cenelec |
EN 60598-2-8:1997 Luminaires - Part 2-8: Particular requirements - Handlamps IEC 60598-2-8:1996 (Modified) |
EN 60598-2-8:1989 + A2:1993 Note 2.1 |
Date expired (1.3.1998) |
|
EN 60598-2-8:1997/A1:2000 IEC 60598-2-8:1996/A1:2000 |
Note 3 |
Date expired (1.5.2003) |
|
|
EN 60598-2-8:1997/A2:2008 IEC 60598-2-8:1996/A2:2007 |
Note 3 |
Date expired (1.2.2011) |
|
|
Cenelec |
EN 60598-2-8:2013 Luminaires - Part 2-8: Particular requirements - Handlamps IEC 60598-2-8:2013 |
EN 60598-2-8:1997 and its amendments Note 2.1 |
3.6.2016 |
|
Cenelec |
EN 60598-2-9:1989 Luminaires - Part 2: Particular requirements - Section 9: Photo and film luminaires (non-professional) IEC 60598-2-9:1987 |
|
|
|
EN 60598-2-9:1989/A1:1994 IEC 60598-2-9:1987/A1:1993 |
Note 3 |
Date expired (1.4.1995) |
|
|
Cenelec |
EN 60598-2-10:2003 Luminaires - Part 2-10: Particular requirements - Portable luminaires for children IEC 60598-2-10:2003 |
|
|
|
EN 60598-2-10:2003/AC:2005 |
|
|
|
|
Cenelec |
EN 60598-2-11:2005 Luminaires - Part 2-11: Particular requirements - Aquarium luminaires IEC 60598-2-11:2005 |
|
|
|
EN 60598-2-11:2005/AC:2005 |
|
|
|
|
Cenelec |
EN 60598-2-11:2013 Luminaires - Part 2-11: Particular requirements - Aquarium luminaires IEC 60598-2-11:2013 |
EN 60598-2-11:2005 Note 2.1 |
20.6.2016 |
|
Cenelec |
EN 60598-2-12:2006 Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights IEC 60598-2-12:2006 |
|
|
|
EN 60598-2-12:2006/AC:2006 |
|
|
|
|
Cenelec |
EN 60598-2-12:2013 Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights IEC 60598-2-12:2013 |
EN 60598-2-12:2006 Note 2.1 |
3.6.2016 |
|
Cenelec |
EN 60598-2-13:2006 Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires IEC 60598-2-13:2006 |
|
|
|
EN 60598-2-13:2006/A1:2012 IEC 60598-2-13:2006/A1:2011 |
Note 3 |
11.1.2015 |
|
|
EN 60598-2-13:2006/AC:2006 |
|
|
|
|
Cenelec |
EN 60598-2-14:2009 Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment IEC 60598-2-14:2009 |
|
|
|
Cenelec |
EN 60598-2-17:1989 Luminaires - Part 2: Particular requirements - Section 17: Luminaires for stage lighting, television film and photographic studios (outdoor and indoor) IEC 60598-2-17:1984 + A1:1987 |
|
|
|
EN 60598-2-17:1989/A2:1991 IEC 60598-2-17:1984/A2:1990 |
Note 3 |
Date expired (1.11.1992) |
|
|
Cenelec |
EN 60598-2-19:1989 Luminaires - Part 2: Particular requirements - Section 19: Air-handling luminaires (safety requirements) IEC 60598-2-19:1981 (Modified) + A1:1987 (Modified) |
|
|
|
EN 60598-2-19:1989/A2:1998 IEC 60598-2-19:1981/A2:1997 |
Note 3 |
Date expired (1.10.1998) |
|
|
EN 60598-2-19:1989/AC:2005 |
|
|
|
|
Cenelec |
EN 60598-2-20:2010 Luminaires - Part 2-20: Particular requirements - Lighting chains IEC 60598-2-20:2010 (Modified) |
EN 60598-2-20:1997 + A1:1998 + A2:2004 |
Date expired (1.4.2013) |
|
EN 60598-2-20:2010/AC:2010 |
|
|
|
|
Cenelec |
EN 60598-2-22:1998 Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting IEC 60598-2-22:1997 (Modified) |
EN 60598-2-22:1990 Note 2.1 |
Date expired (1.3.2008) |
|
EN 60598-2-22:1998/A1:2003 IEC 60598-2-22:1997/A1:2002 |
Note 3 |
Date expired (1.10.2009) |
|
|
EN 60598-2-22:1998/A2:2008 IEC 60598-2-22:1997/A2:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 60598-2-22:1998/AC:2007 |
|
|
|
|
Cenelec |
EN 60598-2-23:1996 Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for filament lamps IEC 60598-2-23:1996 |
|
|
|
EN 60598-2-23:1996/A1:2000 IEC 60598-2-23:1996/A1:2000 |
Note 3 |
Date expired (1.8.2007) |
|
|
EN 60598-2-23:1996/AC:1997 |
|
|
|
|
Cenelec |
EN 60598-2-24:1998 Luminaires - Part 2: Particular requirements - Section 24: Luminaires with limited surface temperatures IEC 60598-2-24:1997 (Modified) |
|
|
|
Cenelec |
EN 60598-2-24:2013 Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures IEC 60598-2-24:2013 |
EN 60598-2-24:1998 Note 2.1 |
24.7.2016 |
|
Cenelec |
EN 60598-2-25:1994 Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings IEC 60598-2-25:1994 |
|
|
|
EN 60598-2-25:1994/A1:2004 IEC 60598-2-25:1994/A1:2004 |
Note 3 |
Date expired (1.11.2011) |
|
|
Cenelec |
EN 60618:1997 Inductive voltage dividers IEC 60618:1978 + A1:1981 |
|
|
|
EN 60618:1997/A2:1997 IEC 60618:1978/A2:1997 |
Note 3 |
Date expired (1.9.1998) |
|
|
Cenelec |
EN 60645-1:2001 Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometers IEC 60645-1:2001 |
EN 60645-1:1994 Note 2.1 |
Date expired (1.10.2004) |
|
Cenelec |
EN 60645-3:2007 Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration IEC 60645-3:2007 |
EN 60645-3:1995 Note 2.1 |
Date expired (1.6.2010) |
|
Cenelec |
EN 60645-4:1995 Audiometers - Part 4: Equipment for extended high-frequency audiometry IEC 60645-4:1994 |
|
|
|
Cenelec |
EN 60645-6:2010 Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions IEC 60645-6:2009 |
|
|
|
Cenelec |
EN 60645-7:2010 Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses IEC 60645-7:2009 |
|
|
|
Cenelec |
EN 60662:1993 High-pressure sodium vapour lamps IEC 60662:1980 (Modified) + A1:1986 (Modified) + A2:1987 (Modified) + A3:1990 (Modified) |
|
|
|
EN 60662:1993/A4:1994 IEC 60662:1980/A4:1992 |
Note 3 |
Date expired (15.3.1995) |
|
|
EN 60662:1993/A5:1994 IEC 60662:1980/A5:1993 |
Note 3 |
Date expired (15.7.1995) |
|
|
EN 60662:1993/A6:1994 IEC 60662:1980/A6:1994 |
Note 3 |
Date expired (15.7.1995) |
|
|
EN 60662:1993/A7:1995 IEC 60662:1980/A7:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 60662:1993/A9:1997 IEC 60662:1980/A9:1997 |
Note 3 |
Date expired (1.4.1998) |
|
|
EN 60662:1993/A10:1997 IEC 60662:1980/A10:1997 |
Note 3 |
Date expired (1.7.1998) |
|
|
Cenelec |
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests IEC 60664-1:2007 |
EN 60664-1:2003 Note 2.1 |
Date expired (1.7.2010) |
|
Cenelec |
EN 60664-3:2003 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution IEC 60664-3:2003 |
HD 625.3 S1:1997 Note 2.1 |
Date expired (1.4.2006) |
|
EN 60664-3:2003/A1:2010 IEC 60664-3:2003/A1:2010 |
Note 3 |
Date expired (1.6.2013) |
|
|
Cenelec |
EN 60664-4:2006 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress IEC 60664-4:2005 |
|
|
|
EN 60664-4:2006/AC:2006 |
|
|
|
|
Cenelec |
EN 60664-5:2007 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm IEC 60664-5:2007 |
EN 60664-5:2003 Note 2.1 |
Date expired (1.10.2010) |
|
Cenelec |
EN 60669-1:1999 Switches for household and similar fixed-electrical installations - Part 1: General requirements IEC 60669-1:1998 (Modified) |
EN 60669-1:1995 + A2:1996 Note 2.1 |
Date expired (1.9.2009) |
|
EN 60669-1:1999/A1:2002 IEC 60669-1:1998/A1:1999 (Modified) |
Note 3 |
Date expired (1.9.2009) |
|
|
EN 60669-1:1999/A2:2008 IEC 60669-1:1998/A2:2006 (Modified) |
Note 3 |
Date expired (1.10.2013) |
|
|
Cenelec |
EN 60669-2-1:2004 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches IEC 60669-2-1:2002 (Modified) + IS1:2011 + IS2:2012 |
EN 60669-2-1:2000 + A2:2001 Note 2.1 |
Date expired (1.7.2009) |
|
EN 60669-2-1:2004/A1:2009 IEC 60669-2-1:2002/A1:2008 (Modified) |
Note 3 |
Date expired (1.4.2012) |
|
|
EN 60669-2-1:2004/A12:2010 |
Note 3 |
Date expired (1.6.2013) |
|
|
EN 60669-2-1:2004/AC:2007 |
|
|
|
|
Cenelec |
EN 60669-2-2:2006 Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS) IEC 60669-2-2:2006 |
EN 60669-2-2:1997 + A1:1997 Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 60669-2-3:2006 Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time delay switches (TDS) IEC 60669-2-3:2006 |
EN 60669-2-3:1997 Note 2.1 |
Date expired (1.9.2009) |
|
Cenelec |
EN 60669-2-4:2005 Switches for household and similar fixed electrical installations - Part 2-4: Particular requirements - Isolating switches IEC 60669-2-4:2004 (Modified) |
|
|
|
Cenelec |
EN 60669-2-6:2012 Switches for household and similar fixed electrical installations - Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires IEC 60669-2-6:2012 (Modified) |
EN 50425:2008 Note 2.1 |
22.2.2015 |
|
Cenelec |
EN 60670-1:2005 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements IEC 60670-1:2002 (Modified) |
|
|
|
EN 60670-1:2005/A1:2013 IEC 60670-1:2002/A1:2011 (Modified) |
Note 3 |
31.12.2017 |
|
|
EN 60670-1:2005/AC:2007 |
|
|
|
|
EN 60670-1:2005/AC:2010 |
|
|
|
|
Cenelec |
EN 60670-21:2007 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means IEC 60670-21:2004 (Modified) |
|
|
|
Cenelec |
EN 60670-22:2006 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures IEC 60670-22:2003 (Modified) |
|
|
|
Cenelec |
EN 60670-23:2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures IEC 60670-23:2006 (Modified) |
|
|
|
Cenelec |
EN 60670-24:2013 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment IEC 60670-24:2011 (Modified) |
|
|
|
Cenelec |
EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals IEC 60688:2012 |
|
|
|
Cenelec |
EN 60691:2003 Thermal-links - Requirements and application guide IEC 60691:2002 |
EN 60691:1995 + A2:2000 Note 2.1 |
Date expired (1.12.2005) |
|
EN 60691:2003/A1:2007 IEC 60691:2002/A1:2006 |
Note 3 |
Date expired (1.12.2009) |
|
|
EN 60691:2003/A2:2010 IEC 60691:2002/A2:2010 |
Note 3 |
Date expired (1.3.2013) |
|
|
Cenelec |
EN 60695-1-1:2000 Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines IEC 60695-1-1:1999 |
EN 60695-1-1:1995 Note 2.1 |
Date expired (1.1.2003) |
|
Cenelec |
EN 60695-2-10:2001 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure IEC 60695-2-10:2000 |
EN 60695-2-1/0:1996 Note 2.1 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure IEC 60695-2-10:2013 |
EN 60695-2-10:2001 Note 2.1 |
14.5.2016 |
|
Cenelec |
EN 60695-2-11:2001 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products IEC 60695-2-11:2000 |
EN 60695-2-1/1:1996 Note 2.1 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60695-2-12:2001 Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability test method for materials IEC 60695-2-12:2000 |
EN 60695-2-1/2:1996 Note 2.1 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60695-2-13:2001 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignitability test method for materials IEC 60695-2-13:2000 |
EN 60695-2-1/3:1996 Note 2.1 |
Date expired (1.11.2003) |
|
Cenelec |
EN 60695-10-2:2003 Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test IEC 60695-10-2:2003 |
|
|
|
Cenelec |
EN 60695-10-3:2002 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test IEC 60695-10-3:2002 |
|
|
|
Cenelec |
EN 60695-11-2:2003 Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance IEC 60695-11-2:2003 |
EN 60695-2-4/1:1993 + A1:1996 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 60695-11-3:2012 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods IEC 60695-11-3:2012 |
|
|
|
Cenelec |
EN 60695-11-4:2011 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method IEC 60695-11-4:2011 |
|
|
|
Cenelec |
EN 60695-11-5:2005 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance IEC 60695-11-5:2004 |
EN 60695-2-2:1994 + A1:1995 Note 2.1 |
Date expired (1.2.2008) |
|
Cenelec |
EN 60695-11-10:1999 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods IEC 60695-11-10:1999 |
|
|
|
EN 60695-11-10:1999/A1:2003 IEC 60695-11-10:1999/A1:2003 |
Note 3 |
Date expired (1.9.2006) |
|
|
Cenelec |
EN 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods IEC 60695-11-10:2013 |
EN 60695-11-10:1999 and its amendment Note 2.1 |
25.6.2016 |
|
Cenelec |
EN 60695-11-20:1999 Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods IEC 60695-11-20:1999 |
|
|
|
EN 60695-11-20:1999/A1:2003 IEC 60695-11-20:1999/A1:2003 |
Note 3 |
Date expired (1.9.2006) |
|
|
Cenelec |
EN 60702-1:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables IEC 60702-1:2002 |
HD 586.1 S1:1994 Note 2.1 |
Date expired (1.3.2005) |
|
Cenelec |
EN 60702-2:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations IEC 60702-2:2002 |
HD 586.2 S1:1994 Note 2.1 |
Date expired (1.3.2005) |
|
Cenelec |
EN 60715:2001 Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations IEC 60715:1981 + A1:1995 |
|
|
|
Cenelec |
EN 60719:1993 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V IEC 60719:1992 |
|
|
|
Cenelec |
EN 60728-11:2005 Cable networks for television signals, sound signals and interactive services - Part 11: Safety IEC 60728-11:2005 (Modified) |
EN 50083-1:1993 + A2:1997 Note 2.1 |
Date expired (1.4.2008) |
|
Cenelec |
EN 60728-11:2010 Cable networks for television signals, sound signals and interactive services - Part 11: Safety IEC 60728-11:2010 |
EN 60728-11:2005 Note 2.1 |
Date expired (1.10.2013) |
|
Cenelec |
EN 60730-1:1991 Automatic electrical controls for household and similar use - Part 1: General requirements IEC 60730-1:1986 (Modified) |
|
|
|
EN 60730-1:1991/A1:1991 IEC 60730-1:1986/A1:1990 |
Note 3 |
Date expired (1.7.1995) |
|
|
EN 60730-1:1991/A11:1991 |
Note 3 |
Date expired (1.7.1995) |
|
|
EN 60730-1:1991/A12:1993 |
Note 3 |
Date expired (1.7.1995) |
|
|
EN 60730-1:1991/A14:1995 |
Note 3 |
Date expired (1.7.1995) |
|
|
Cenelec |
EN 60730-1:1995 Automatic electrical controls for household and similar use - Part 1: General requirements IEC 60730-1:1993 (Modified) |
EN 60730-1:1991 and its amendments Note 2.1 |
Date expired (1.7.1995) |
|
EN 60730-1:1995/A11:1996 |
Note 3 |
Date expired (1.1.1998) |
|
|
EN 60730-1:1995/A12:1996 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60730-1:1995/A1:1997 IEC 60730-1:1993/A1:1994 (Modified) |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60730-1:1995/A2:1998 IEC 60730-1:1993/A2:1997 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60730-1:1995/A14:1998 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60730-1:1995/A15:1998 |
Note 3 |
Date expired (1.12.1996) |
|
|
EN 60730-1:1995/A16:1999 |
Note 3 |
Date expired (1.10.2000) |
|
|
EN 60730-1:1995/A17:2000 |
Note 3 |
Date expired (1.10.2002) |
|
|
EN 60730-1:1995/A18:2003 |
Note 3 |
Date expired (1.6.2010) |
|
|
EN 60730-1:1995/AC:2007 |
|
|
|
|
Cenelec |
EN 60730-1:2000 Automatic electrical controls for household and similar use - Part 1: General requirements IEC 60730-1:1999 (Modified) |
EN 60730-1:1995 and its amendments Note 2.1 |
Date expired (1.7.1995) |
|
EN 60730-1:2000/A12:2003 |
Note 3 |
Date expired (1.6.2010) |
|
|
EN 60730-1:2000/A1:2004 IEC 60730-1:1999/A1:2003 (Modified) |
Note 3 |
Date expired (1.6.2010) |
|
|
EN 60730-1:2000/A13:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60730-1:2000/A14:2005 |
Note 3 |
Date expired (1.6.2010) |
|
|
EN 60730-1:2000/A2:2008 IEC 60730-1:1999/A2:2007 (Modified) |
Note 3 |
Date expired (1.6.2011) |
|
|
EN 60730-1:2000/AC:2007 |
|
|
|
|
Cenelec |
EN 60730-1:2011 Automatic electrical controls for household and similar use - Part 1: General requirements IEC 60730-1:2010 (Modified) |
EN 60730-1:2000 and its amendments Note 2.1 |
Date expired (1.10.2013) |
|
Cenelec |
EN 60730-2-2:2002 Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors IEC 60730-2-2:2001 (Modified) |
EN 60730-2-2:1991 + A1:1997 + A2:1997 + A11:1995 Note 2.1 |
Date expired (1.3.2009) |
|
EN 60730-2-2:2002/A11:2005 |
Note 3 |
Date expired (1.3.2009) |
|
|
EN 60730-2-2:2002/A1:2006 IEC 60730-2-2:2001/A1:2005 (Modified) |
Note 3 |
Date expired (1.3.2009) |
|
|
Cenelec |
EN 60730-2-3:2007 Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps IEC 60730-2-3:2006 (Modified) |
EN 60730-2-3:1992 + A1:1998 + A2:2001 + A11:2005 Note 2.1 |
Date expired (1.9.2010) |
|
Cenelec |
EN 60730-2-4:2007 Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type IEC 60730-2-4:2006 (Modified) |
EN 60730-2-4:1993 + A1:1998 + A2:2002 Note 2.1 |
Date expired (1.9.2010) |
|
Cenelec |
EN 60730-2-5:2002 Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems IEC 60730-2-5:2000 (Modified) |
EN 60730-2-5:1995 + A1:1996 + A2:1998 Note 2.1 |
Date expired (1.12.2008) |
|
EN 60730-2-5:2002/A1:2004 IEC 60730-2-5:2000/A1:2004 (Modified) |
Note 3 |
Date expired (1.12.2008) |
|
|
EN 60730-2-5:2002/A11:2005 |
Note 3 |
Date expired (1.12.2008) |
|
|
EN 60730-2-5:2002/A2:2010 IEC 60730-2-5:2000/A2:2008 (Modified) |
Note 3 |
Date expired (1.3.2013) |
|
|
Cenelec |
EN 60730-2-6:2008 Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements IEC 60730-2-6:2007 (Modified) |
EN 60730-2-6:1995 + A1:1997 + A2:1998 |
Date expired (1.7.2011) |
|
Cenelec |
EN 60730-2-7:1991 Automatic electrical controls for household and similar use - Part 2: Particular requirements for timers and time switches IEC 60730-2-7:1990 (Modified) |
|
|
|
EN 60730-2-7:1991/A12:1993 |
Note 3 |
Date expired (1.1.2004) |
|
|
EN 60730-2-7:1991/A11:1994 |
Note 3 |
Date expired (1.1.2004) |
|
|
EN 60730-2-7:1991/A1:1997 IEC 60730-2-7:1990/A1:1994 (Modified) |
Note 3 |
Date expired (1.1.2004) |
|
|
EN 60730-2-7:1991/A13:2003 |
Note 3 |
Date expired (1.3.2006) |
|
|
EN 60730-2-7:1991/A14:2003 |
Note 3 |
Date expired (1.6.2010) |
|
|
EN 60730-2-7:1991/A12:1993/AC:2001 |
|
|
|
|
EN 60730-2-7:1991/A1:1997/AC:2001 |
|
|
|
|
EN 60730-2-7:1991/AC:2001 |
|
|
|
|
EN 60730-2-7:1991/A11:1994/AC:2001 |
|
|
|
|
Cenelec |
EN 60730-2-7:2010 Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches IEC 60730-2-7:2008 (Modified) |
EN 60730-2-7:1991 and its amendments Note 2.1 |
Date expired (1.10.2013) |
|
EN 60730-2-7:2010/AC:2011 |
|
|
|
|
Cenelec |
EN 60730-2-8:2002 Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements IEC 60730-2-8:2000 (Modified) |
EN 60730-2-8:1995 + A1:1997 + A2:1997 Note 2.1 |
Date expired (1.12.2008) |
|
EN 60730-2-8:2002/A1:2003 IEC 60730-2-8:2000/A1:2002 (Modified) |
Note 3 |
Date expired (1.12.2008) |
|
|
Cenelec |
EN 60730-2-9:2002 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls IEC 60730-2-9:2000 (Modified) |
EN 60730-2-9:1995 + A1:1996 + A2:1997 + A11:1997 + A12:2001 Note 2.1 |
Date expired (1.12.2008) |
|
EN 60730-2-9:2002/A1:2003 IEC 60730-2-9:2000/A1:2002 (Modified) |
Note 3 |
Date expired (1.12.2008) |
|
|
EN 60730-2-9:2002/A11:2003 |
Note 3 |
Date expired (1.12.2008) |
|
|
EN 60730-2-9:2002/A12:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 60730-2-9:2002/A2:2005 IEC 60730-2-9:2000/A2:2004 (Modified) |
Note 3 |
Date expired (1.12.2007) |
|
|
Cenelec |
EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls IEC 60730-2-9:2008 (Modified) |
EN 60730-2-9:2002 and its amendments Note 2.1 |
Date expired (1.11.2013) |
|
Cenelec |
EN 60730-2-10:2007 Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays IEC 60730-2-10:2006 |
EN 60730-2-10:1995 + A1:1996 + A2:2002 Note 2.1 |
Date expired (1.9.2010) |
|
Cenelec |
EN 60730-2-11:2008 Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators IEC 60730-2-11:2006 |
EN 60730-2-11:1993 + A1:1997 + A2:1998 + A11:2005 Note 2.1 |
Date expired (1.10.2010) |
|
Cenelec |
EN 60730-2-12:2006 Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks IEC 60730-2-12:2005 (Modified) |
EN 60730-2-12:1993 + A1:1997 + A11:2005 Note 2.1 |
Date expired (1.10.2008) |
|
EN 60730-2-12:2006/A11:2008 |
Note 3 |
Date expired (1.4.2011) |
|
|
Cenelec |
EN 60730-2-13:2008 Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls IEC 60730-2-13:2006 (Modified) |
EN 60730-2-13:1998 + A1:1998 + A2:2002 + A11:2005 Note 2.1 |
Date expired (1.10.2010) |
|
Cenelec |
EN 60730-2-14:1997 Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators IEC 60730-2-14:1995 (Modified) |
|
|
|
EN 60730-2-14:1997/A1:2001 IEC 60730-2-14:1995/A1:2001 |
Note 3 |
Date expired (1.7.2008) |
|
|
EN 60730-2-14:1997/A11:2005 |
Note 3 |
Date expired (1.7.2008) |
|
|
EN 60730-2-14:1997/A2:2008 IEC 60730-2-14:1995/A2:2007 (Modified) |
Note 3 |
Date expired (1.8.2011) |
|
|
Cenelec |
EN 60730-2-15:2010 Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls IEC 60730-2-15:2008 (Modified) |
EN 60730-2-15:1995 + A1:1998 + A11:2005 + EN 60730-2-16:1997 + A1:1998 + A2:2001 + A11:2005 + EN 60730-2-18:1999 + A11:2005 |
Date expired (1.3.2013) |
|
Cenelec |
EN 60730-2-19:2002 Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements IEC 60730-2-19:1997 (Modified) + A1:2000 (Modified) |
|
|
|
EN 60730-2-19:2002/A11:2005 |
Note 3 |
Date expired (1.10.2008) |
|
|
EN 60730-2-19:2002/A2:2008 IEC 60730-2-19:1997/A2:2007 |
Note 3 |
Date expired (1.2.2011) |
|
|
Cenelec |
EN 60799:1998 Electrical accessories - Cord sets and interconnection cord sets IEC 60799:1998 |
EN 60799:1987 + A1:1994 Note 2.1 |
Date expired (1.7.2001) |
|
Cenelec |
EN 60811-1-1:1995 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-1: General application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties IEC 60811-1-1:1993 |
HD 505.1.1 S3:1991 Note 2.1 |
Date expired (1.12.1996) |
|
EN 60811-1-1:1995/A1:2001 IEC 60811-1-1:1993/A1:2001 |
Note 3 |
Date expired (1.5.2004) |
|
|
Cenelec |
EN 60811-1-2:1995 Insulating and sheathing materials of electric cables - Common test methods - Part 1-2: General application - Thermal ageing methods IEC 60811-1-2:1985 + A1:1989 |
HD 505.1.2 S2:1991 Note 2.1 |
Date expired (1.12.1996) |
|
EN 60811-1-2:1995/A2:2000 IEC 60811-1-2:1985/A2:2000 |
Note 3 |
Date expired (1.11.2003) |
|
|
Cenelec |
EN 60811-1-3:1995 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-3: General application - Methods for determining the density - Water absorption tests - Shrinkage test IEC 60811-1-3:1993 |
HD 505.1.3 S2:1991 Note 2.1 |
Date expired (1.12.1996) |
|
EN 60811-1-3:1995/A1:2001 IEC 60811-1-3:1993/A1:2001 |
Note 3 |
Date expired (1.7.2004) |
|
|
Cenelec |
EN 60811-1-4:1995 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 1-4: General application - Tests at low temperature IEC 60811-1-4:1985 + A1:1993 |
HD 505.1.4 S1:1988 Note 2.1 |
Date expired (1.12.1996) |
|
EN 60811-1-4:1995/A2:2001 IEC 60811-1-4:1985/A2:2001 |
Note 3 |
Date expired (1.9.2004) |
|
|
Cenelec |
EN 60811-2-1:1998 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests IEC 60811-2-1:1998 |
EN 60811-2-1:1995 Note 2.1 |
Date expired (1.5.2000) |
|
EN 60811-2-1:1998/A1:2001 IEC 60811-2-1:1998/A1:2001 |
Note 3 |
Date expired (1.9.2004) |
|
|
Cenelec |
EN 60811-3-1:1995 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-1: Methods specific to PVC compounds - Pressure test at high temperature - Tests for resistance to cracking IEC 60811-3-1:1985 |
HD 505.3.1 S1:1988 Note 2.1 |
Date expired (1.5.2000) |
|
EN 60811-3-1:1995/A1:1996 IEC 60811-3-1:1985/A1:1994 |
Note 3 |
Date expired (1.6.1997) |
|
|
EN 60811-3-1:1995/A2:2001 IEC 60811-3-1:1985/A2:2001 |
Note 3 |
Date expired (1.7.2004) |
|
|
Cenelec |
EN 60811-3-2:1995 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test IEC 60811-3-2:1985 + A1:1993 |
HD 505.3.2 S1:1988 Note 2.1 |
Date expired (1.12.1996) |
|
EN 60811-3-2:1995/A2:2004 IEC 60811-3-2:1985/A2:2003 |
Note 3 |
Date expired (1.3.2007) |
|
|
Cenelec |
EN 60811-4-1:2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope IEC 60811-4-1:2004 |
EN 60811-4-1:1995 Note 2.1 |
Date expired (1.7.2007) |
|
Cenelec |
EN 60811-4-2:2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation IEC 60811-4-2:2004 |
EN 60811-4-2:1999 Note 2.1 |
Date expired (1.7.2007) |
|
Cenelec |
EN 60811-5-1:1999 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C IEC 60811-5-1:1990 (Modified) |
HD 505.5.1 S1:1992 Note 2.1 |
Date expired (1.4.2001) |
|
EN 60811-5-1:1999/A1:2004 IEC 60811-5-1:1990/A1:2003 |
Note 3 |
Date expired (1.3.2007) |
|
|
Cenelec |
EN 60811-100:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General IEC 60811-100:2012 |
EN 60811-1-1:1995 and its amendment + EN 60811-1-2:1995 and its amendment + EN 60811-1-3:1995 and its amendment + EN 60811-1-4:1995 and its amendment + EN 60811-2-1:1998 and its amendment + EN 60811-3-1:1995 and its amendments + EN 60811-3-2:1995 and its amendment + EN 60811-4-1:2004 + EN 60811-4-2:2004 + EN 60811-5-1:1999 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness IEC 60811-201:2012 |
EN 60811-1-1:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-202:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath IEC 60811-202:2012 |
EN 60811-1-1:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-203:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions IEC 60811-203:2012 |
EN 60811-1-1:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-301:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds IEC 60811-301:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-302:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds IEC 60811-302:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven IEC 60811-401:2012 |
EN 60811-1-2:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-402:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests IEC 60811-402:2012 |
EN 60811-1-3:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-403:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds IEC 60811-403:2012 |
EN 60811-2-1:1998 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-404:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths IEC 60811-404:2012 |
EN 60811-2-1:1998 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-405:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths IEC 60811-405:2012 |
EN 60811-3-2:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-406:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds IEC 60811-406:2012 |
EN 60811-4-1:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds IEC 60811-407:2012 |
EN 60811-4-2:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-408:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds IEC 60811-408:2012 |
EN 60811-4-2:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths IEC 60811-409:2012 |
EN 60811-3-2:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-410:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors IEC 60811-410:2012 |
EN 60811-4-2:2004 Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-411:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds IEC 60811-411:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb IEC 60811-412:2012 |
EN 60811-1-2:1995 and its amendment Note 2.1 |
16.4.2015 |
|
Cenelec |
EN 60811-501:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds IEC 60811-501:2012 |
EN 60811-1-1:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations IEC 60811-502:2012 |
EN 60811-1-3:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths IEC 60811-503:2012 |
EN 60811-1-3:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths IEC 60811-504:2012 |
EN 60811-1-4:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-505:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths IEC 60811-505:2012 |
EN 60811-1-4:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-506:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths IEC 60811-506:2012 |
EN 60811-1-4:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials IEC 60811-507:2012 |
EN 60811-2-1:1998 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths IEC 60811-508:2012 |
EN 60811-3-1:1995 and its amendments Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-509:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) IEC 60811-509:2012 |
EN 60811-3-1:1995 and its amendments Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-510:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air IEC 60811-510:2012 |
EN 60811-4-2:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-511:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds IEC 60811-511:2012 |
EN 60811-4-1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-512:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature IEC 60811-512:2012 |
EN 60811-4-2:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-513:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning IEC 60811-513:2012 |
EN 60811-4-2:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-601:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds IEC 60811-601:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-602:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds IEC 60811-602:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-603:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds IEC 60811-603:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds IEC 60811-604:2012 |
EN 60811-5-1:1999 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-605:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds IEC 60811-605:2012 |
EN 60811-4-1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-606:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density IEC 60811-606:2012 |
EN 60811-1-3:1995 and its amendment Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60811-607:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene IEC 60811-607:2012 |
EN 60811-4-1:2004 Note 2.1 |
17.4.2015 |
|
Cenelec |
EN 60825-1:2007 Safety of laser products - Part 1: Equipment classification and requirements IEC 60825-1:2007 |
EN 60825-1:1994 + A1:2002 + A2:2001 |
Date expired (1.9.2010) |
|
Cenelec |
EN 60825-2:2004 Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) IEC 60825-2:2004 |
EN 60825-2:2000 Note 2.1 |
Date expired (1.9.2007) |
|
EN 60825-2:2004/A1:2007 IEC 60825-2:2004/A1:2006 |
Note 3 |
Date expired (1.2.2010) |
|
|
EN 60825-2:2004/A2:2010 IEC 60825-2:2004/A2:2010 |
Note 3 |
Date expired (1.10.2013) |
|
|
Cenelec |
EN 60825-4:2006 Safety of laser products - Part 4: Laser guards IEC 60825-4:2006 |
EN 60825-4:1997 + A1:2002 + A2:2003 Note 2.1 |
Date expired (1.10.2009) |
|
EN 60825-4:2006/A1:2008 IEC 60825-4:2006/A1:2008 |
Note 3 |
Date expired (1.9.2011) |
|
|
EN 60825-4:2006/A2:2011 IEC 60825-4:2006/A2:2011 |
Note 3 |
3.5.2014 |
|
|
Cenelec |
EN 60825-12:2004 Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information IEC 60825-12:2004 |
|
|
|
Cenelec |
EN 60831-1:1996 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation IEC 60831-1:1996 |
EN 60831-1:1993 Note 2.1 |
Date expired (1.8.1997) |
|
EN 60831-1:1996/A1:2003 IEC 60831-1:1996/A1:2002 |
Note 3 |
Date expired (1.2.2006) |
|
|
Cenelec |
EN 60831-2:1996 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test, self-healing test and destruction test IEC 60831-2:1995 |
EN 60831-2:1993 Note 2.1 |
Date expired (1.12.1996) |
|
Cenelec |
EN 60838-1:2004 Miscellaneous lampholders - Part 1: General requirements and tests IEC 60838-1:2004 |
EN 60838-1:1998 + A1:1999 + A2:2002 Note 2.1 |
Date expired (1.10.2007) |
|
EN 60838-1:2004/A1:2008 IEC 60838-1:2004/A1:2008 |
Note 3 |
Date expired (1.8.2011) |
|
|
EN 60838-1:2004/A2:2011 IEC 60838-1:2004/A2:2011 |
Note 3 |
18.4.2014 |
|
|
Cenelec |
EN 60838-2-1:1996 Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 IEC 60838-2-1:1994 |
|
|
|
EN 60838-2-1:1996/A1:1998 IEC 60838-2-1:1994/A1:1998 |
Note 3 |
Date expired (1.8.2005) |
|
|
EN 60838-2-1:1996/A2:2004 IEC 60838-2-1:1994/A2:2004 |
Note 3 |
Date expired (1.10.2007) |
|
|
Cenelec |
EN 60838-2-2:2006 Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules IEC 60838-2-2:2006 |
|
|
|
EN 60838-2-2:2006/A1:2012 IEC 60838-2-2:2006/A1:2012 |
Note 3 |
1.5.2015 |
|
|
Cenelec |
EN 60898-1:2003 Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation IEC 60898-1:2002 (Modified) |
EN 60898:1991 + A1:1991 + A11:1994 + A12:1995 + A13:1995 + A14:1995 + A15:1995 + A16:1996 + A17:1998 + A18:1998 + A19:2000 Note 2.1 |
Date expired (1.10.2008) |
|
EN 60898-1:2003/A1:2004 IEC 60898-1:2002/A1:2002 (Modified) |
Note 3 |
Date expired (1.10.2008) |
|
|
EN 60898-1:2003/A11:2005 |
Note 3 |
Date expired (1.5.2010) |
|
|
EN 60898-1:2003/A13:2012 |
Note 3 |
21.5.2015 |
|
|
EN 60898-1:2003/AC:2004 |
|
|
|
|
Cenelec |
EN 60898-2:2006 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation IEC 60898-2:2000 (Modified) + A1:2003 (Modified) |
EN 60898-2:2001 Note 2.1 |
Date expired (1.6.2010) |
|
Cenelec |
EN 60931-1:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation IEC 60931-1:1996 |
EN 60931-1:1993 Note 2.1 |
Date expired (1.8.1997) |
|
EN 60931-1:1996/A1:2003 IEC 60931-1:1996/A1:2002 |
Note 3 |
Date expired (1.2.2006) |
|
|
Cenelec |
EN 60931-2:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test and destruction test IEC 60931-2:1995 |
EN 60931-2:1993 Note 2.1 |
Date expired (1.12.1996) |
|
Cenelec |
EN 60931-3:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 3: Internal fuses IEC 60931-3:1996 |
|
|
|
Cenelec |
EN 60934:2001 Circuit-breakers for equipment (CBE) IEC 60934:2000 |
EN 60934:1994 + A1:1994 + A2:1997 + A11:1998 Note 2.1 |
Date expired (1.11.2003) |
|
EN 60934:2001/A1:2007 IEC 60934:2000/A1:2007 |
Note 3 |
Date expired (1.2.2010) |
|
|
EN 60934:2001/A2:2013 IEC 60934:2000/A2:2013 |
Note 3 |
22.2.2016 |
|
|
Cenelec |
EN 60947-1:2007 Low-voltage switchgear and controlgear - Part 1: General rules IEC 60947-1:2007 |
EN 60947-1:2004 Note 2.1 |
Date expired (1.7.2010) |
|
EN 60947-1:2007/A1:2011 IEC 60947-1:2007/A1:2010 |
Note 3 |
1.1.2014 |
|
|
Cenelec |
EN 60947-2:2006 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers IEC 60947-2:2006 |
EN 60947-2:2003 Note 2.1 |
Date expired (1.7.2009) |
|
EN 60947-2:2006/A1:2009 IEC 60947-2:2006/A1:2009 |
Note 3 |
Date expired (1.7.2012) |
|
|
EN 60947-2:2006/A2:2013 IEC 60947-2:2006/A2:2013 |
Note 3 |
7.3.2016 |
|
|
Cenelec |
EN 60947-3:2009 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units IEC 60947-3:2008 |
EN 60947-3:1999 + A1:2001 + A2:2005 Note 2.1 |
Date expired (1.5.2012) |
|
EN 60947-3:2009/A1:2012 IEC 60947-3:2008/A1:2012 |
Note 3 |
21.3.2015 |
|
|
Cenelec |
EN 60947-4-1:2010 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters IEC 60947-4-1:2009 |
EN 60947-4-1:2001 + A1:2002 + A2:2005 |
Date expired (1.4.2013) |
|
EN 60947-4-1:2010/A1:2012 IEC 60947-4-1:2009/A1:2012 |
Note 3 |
24.8.2015 |
|
|
Cenelec |
EN 60947-4-2:2000 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters IEC 60947-4-2:1999 |
HD 419.2 S1:1987 + EN 60947-4-2:1996 + A1:1997 + A2:1998 Note 2.1 |
Date expired (1.12.2002) |
|
EN 60947-4-2:2000/A1:2002 IEC 60947-4-2:1999/A1:2001 |
Note 3 |
Date expired (1.3.2005) |
|
|
EN 60947-4-2:2000/A2:2006 IEC 60947-4-2:1999/A2:2006 |
Note 3 |
Date expired (1.12.2009) |
|
|
Cenelec |
EN 60947-4-2:2012 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters IEC 60947-4-2:2011 |
EN 60947-4-2:2000 and its amendments Note 2.1 |
22.6.2014 |
|
Cenelec |
EN 60947-4-3:2000 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads IEC 60947-4-3:1999 |
HD 419.2 S1:1987 Note 2.1 |
Date expired (1.12.2002) |
|
EN 60947-4-3:2000/A1:2006 IEC 60947-4-3:1999/A1:2006 |
Note 3 |
Date expired (1.11.2009) |
|
|
EN 60947-4-3:2000/A2:2011 IEC 60947-4-3:1999/A2:2011 |
Note 3 |
18.4.2014 |
|
|
Cenelec |
EN 60947-5-1:2004 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices IEC 60947-5-1:2003 |
EN 60947-5-1:1997 + A1:1999 + A2:2000 + A12:1999 Note 2.1 |
Date expired (1.5.2007) |
|
EN 60947-5-1:2004/A1:2009 IEC 60947-5-1:2003/A1:2009 |
Note 3 |
Date expired (1.5.2012) |
|
|
EN 60947-5-1:2004/AC:2005 |
|
|
|
|
Cenelec |
EN 60947-5-2:2007 Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches IEC 60947-5-2:2007 |
EN 60947-5-2:1998 + A1:1999 + A2:2004 Note 2.1 |
Date expired (1.11.2010) |
|
EN 60947-5-2:2007/A1:2012 IEC 60947-5-2:2007/A1:2012 |
Note 3 |
1.11.2015 |
|
|
Cenelec |
EN 60947-5-3:1999 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) IEC 60947-5-3:1999 |
|
|
|
EN 60947-5-3:1999/A1:2005 IEC 60947-5-3:1999/A1:2005 |
Note 3 |
Date expired (1.3.2008) |
|
|
Cenelec |
EN 60947-5-4:2003 Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests IEC 60947-5-4:2002 |
EN 60947-5-4:1997 Note 2.1 |
Date expired (1.12.2006) |
|
Cenelec |
EN 60947-5-5:1997 Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function IEC 60947-5-5:1997 |
|
|
|
EN 60947-5-5:1997/A1:2005 IEC 60947-5-5:1997/A1:2005 |
Note 3 |
Date expired (1.3.2008) |
|
|
EN 60947-5-5:1997/A11:2013 |
Note 3 |
3.12.2015 |
|
|
Cenelec |
EN 60947-5-7:2003 Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output IEC 60947-5-7:2003 |
EN 50319:1999 Note 2.1 |
Date expired (1.9.2006) |
|
Cenelec |
EN 60947-5-8:2006 Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches IEC 60947-5-8:2006 |
|
|
|
Cenelec |
EN 60947-5-9:2007 Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches IEC 60947-5-9:2006 |
|
|
|
Cenelec |
EN 60947-6-1:2005 Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment IEC 60947-6-1:2005 |
EN 60947-6-1:1991 + A1:1994 + A2:1997 Note 2.1 |
Date expired (1.10.2008) |
|
Cenelec |
EN 60947-6-2:2003 Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) IEC 60947-6-2:2002 |
EN 60947-6-2:1993 + A1:1997 + A2:1999 Note 2.1 |
Date expired (1.9.2005) |
|
EN 60947-6-2:2003/A1:2007 IEC 60947-6-2:2002/A1:2007 |
Note 3 |
Date expired (1.3.2010) |
|
|
Cenelec |
EN 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors IEC 60947-7-1:2009 |
EN 60947-7-1:2002 Note 2.1 |
Date expired (1.6.2012) |
|
Cenelec |
EN 60947-7-2:2009 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors IEC 60947-7-2:2009 |
EN 60947-7-2:2002 Note 2.1 |
Date expired (1.6.2012) |
|
Cenelec |
EN 60947-7-3:2009 Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks IEC 60947-7-3:2009 |
EN 60947-7-3:2002 Note 2.1 |
Date expired (1.9.2012) |
|
Cenelec |
EN 60947-8:2003 Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines IEC 60947-8:2003 |
|
|
|
EN 60947-8:2003/A1:2006 IEC 60947-8:2003/A1:2006 |
Note 3 |
Date expired (1.10.2009) |
|
|
EN 60947-8:2003/A2:2012 IEC 60947-8:2003/A2:2011 |
Note 3 |
22.6.2014 |
|
|
Cenelec |
EN 60950-1:2006 Information technology equipment - Safety - Part 1: General requirements IEC 60950-1:2005 (Modified) |
EN 60950-1:2001 + A11:2004 Note 2.1 |
Date expired (1.12.2010) |
|
EN 60950-1:2006/A11:2009 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 60950-1:2006/A1:2010 IEC 60950-1:2005/A1:2009 (Modified) |
Note 3 |
Date expired (1.3.2013) |
|
|
EN 60950-1:2006/A12:2011 |
Note 3 |
Date expired (24.1.2013) |
|
|
EN 60950-1:2006/A2:2013 IEC 60950-1:2005/A2:2013 (Modified) |
Note 3 |
2.7.2016 |
|
|
EN 60950-1:2006/AC:2011 |
|
|
|
|
Cenelec |
EN 60950-21:2003 Information technology equipment - Safety - Part 21: Remote power feeding IEC 60950-21:2002 |
|
|
|
Cenelec |
EN 60950-22:2006 Information technology equipment - Safety - Part 22: Equipment installed outdoors IEC 60950-22:2005 (Modified) |
|
|
|
EN 60950-22:2006/AC:2008 |
|
|
|
|
Cenelec |
EN 60950-23:2006 Information technology equipment - Safety - Part 23: Large data storage equipment IEC 60950-23:2005 |
|
|
|
EN 60950-23:2006/AC:2008 |
|
|
|
|
Cenelec |
EN 60968:1990 Self-ballasted lamps for general lighting services - Safety requirements IEC 60968:1988 (Modified) |
|
|
|
EN 60968:1990/A1:1993 IEC 60968:1988/A1:1991 |
Note 3 |
Date expired (1.12.1993) |
|
|
EN 60968:1990/A2:1999 IEC 60968:1988/A2:1999 |
Note 3 |
Date expired (1.10.2002) |
|
|
Cenelec |
EN 60968:2013 Self-ballasted lamps for general lighting services - Safety requirements IEC 60968:2012 |
EN 60968:1990 and its amendments Note 2.1 |
31.10.2015 |
|
Cenelec |
EN 60974-1:2005 Arc welding equipment - Part 1: Welding power sources IEC 60974-1:2005 |
EN 60974-1:1998 + A1:2000 + A2:2003 Note 2.1 |
Date expired (1.10.2008) |
|
Cenelec |
EN 60974-1:2012 Arc welding equipment - Part 1: Welding power sources IEC 60974-1:2012 |
EN 60974-1:2005 Note 2.1 |
17.7.2015 |
|
Cenelec |
EN 60974-2:2008 Arc welding equipment - Part 2: Liquid cooling systems IEC 60974-2:2007 |
EN 60974-2:2003 Note 2.1 |
Date expired (1.2.2011) |
|
Cenelec |
EN 60974-2:2013 Arc welding equipment - Part 2: Liquid cooling systems IEC 60974-2:2013 |
EN 60974-2:2008 Note 2.1 |
28.2.2016 |
|
Cenelec |
EN 60974-3:2007 Arc welding equipment - Part 3: Arc striking and stabilizing devices IEC 60974-3:2007 |
EN 60974-3:2003 Note 2.1 |
Date expired (1.12.2010) |
|
Cenelec |
EN 60974-5:2008 Arc welding equipment - Part 5: Wire feeders IEC 60974-5:2007 |
EN 60974-5:2002 Note 2.1 |
Date expired (1.2.2011) |
|
Cenelec |
EN 60974-5:2013 Arc welding equipment - Part 5: Wire feeders IEC 60974-5:2013 |
EN 60974-5:2008 Note 2.1 |
27.6.2016 |
|
Cenelec |
EN 60974-6:2003 Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources IEC 60974-6:2003 |
EN 50060:1989 + A1:1994 Note 2.1 |
Date expired (1.3.2006) |
|
EN 60974-6:2003/AC:2005 |
|
|
|
|
Cenelec |
EN 60974-6:2011 Arc welding equipment - Part 6: Limited duty equipment IEC 60974-6:2010 |
EN 60974-6:2003 Note 2.1 |
1.1.2014 |
|
Cenelec |
EN 60974-7:2005 Arc welding equipment - Part 7:Torches IEC 60974-7:2005 |
EN 60974-7:2000 Note 2.1 |
Date expired (1.8.2008) |
|
Cenelec |
EN 60974-7:2013 Arc welding equipment - Part 7:Torches IEC 60974-7:2013 |
EN 60974-7:2005 Note 2.1 |
28.2.2016 |
|
Cenelec |
EN 60974-8:2009 Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems IEC 60974-8:2009 |
EN 60974-8:2004 Note 2.1 |
Date expired (1.3.2012) |
|
Cenelec |
EN 60974-11:2004 Arc welding equipment - Part 11: Electrode holders IEC 60974-11:2004 |
EN 60974-11:1995 Note 2.1 |
Date expired (1.9.2007) |
|
Cenelec |
EN 60974-11:2010 Arc welding equipment - Part 11: Electrode holders IEC 60974-11:2010 |
EN 60974-11:2004 Note 2.1 |
Date expired (1.10.2013) |
|
Cenelec |
EN 60974-12:2005 Arc welding equipment - Part 12: Coupling devices for welding cables IEC 60974-12:2005 |
EN 60974-12:1995 Note 2.1 |
Date expired (1.7.2008) |
|
Cenelec |
EN 60974-12:2011 Arc welding equipment - Part 12: Coupling devices for welding cables IEC 60974-12:2011 |
EN 60974-12:2005 Note 2.1 |
22.6.2014 |
|
Cenelec |
EN 60974-13:2011 Arc welding equipment - Part 13: Welding clamp IEC 60974-13:2011 |
|
|
|
Cenelec |
EN 60998-1:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements IEC 60998-1:2002 (Modified) |
EN 60998-1:1993 + A1:2001 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-1:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units IEC 60998-2-1:2002 (Modified) |
EN 60998-2-1:1993 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-2:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units IEC 60998-2-2:2002 (Modified) |
EN 60998-2-2:1993 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-3:2004 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units IEC 60998-2-3:2002 (Modified) |
EN 60998-2-3:1993 Note 2.1 |
Date expired (1.3.2007) |
|
Cenelec |
EN 60998-2-4:2005 Connecting devices for low voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices IEC 60998-2-4:2004 (Modified) |
EN 60998-2-4:1993 Note 2.1 |
Date expired (1.3.2008) |
|
Cenelec |
EN 60999-1:2000 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) IEC 60999-1:1999 |
EN 60999-1:1993 Note 2.1 |
Date expired (1.1.2003) |
|
Cenelec |
EN 60999-2:2003 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) IEC 60999-2:2003 |
|
|
|
Cenelec |
EN 61008-1:2004 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules IEC 61008-1:1996 (Modified) + A1:2002 (Modified) |
EN 61008-1:1994 + A2:1995 + A11:1995 + A12:1998 + A13:1998 + A14:1998 + A17:2000 Note 2.1 |
Date expired (1.4.2009) |
|
EN 61008-1:2004/A11:2007 |
Note 3 |
Date expired (1.4.2009) |
|
|
EN 61008-1:2004/A12:2009 |
Note 3 |
Date expired (1.12.2011) |
|
|
Cenelec |
EN 61008-1:2012 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules IEC 61008-1:2010 (Modified) |
EN 61008-1:2004 and its amendments Note 2.1 |
18.6.2017 |
|
Cenelec |
EN 61008-2-1:1994 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage IEC 61008-2-1:1990 |
|
|
|
EN 61008-2-1:1994/A11:1998 |
Note 3 |
Date expired (1.4.2001) |
|
|
EN 61008-2-1:1994/A11:1998/AC:1999 |
|
|
|
|
Cenelec |
EN 61009-1:2004 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules IEC 61009-1:1996 (Modified) + A1:2002 (Modified) |
EN 61009-1:1994 + A1:1995 + A2:1998 + A11:1995 + A13:1998 + A14:1998 + A15:1998 + A19:2000 Note 2.1 |
Date expired (1.4.2009) |
|
EN 61009-1:2004/A11:2008 |
Note 3 |
Date expired (1.4.2009) |
|
|
EN 61009-1:2004/A12:2009 |
Note 3 |
Date expired (1.12.2011) |
|
|
EN 61009-1:2004/A13:2009 |
Note 3 |
Date expired (1.12.2011) |
|
|
EN 61009-1:2004/AC:2006 |
|
|
|
|
Cenelec |
EN 61009-1:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules IEC 61009-1:2010 (Modified) |
EN 61009-1:2004 and its amendments Note 2.1 |
18.6.2017 |
|
Cenelec |
EN 61009-2-1:1994 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage IEC 61009-2-1:1991 |
|
|
|
EN 61009-2-1:1994/A11:1998 |
Note 3 |
Date expired (1.4.2001) |
|
|
EN 61009-2-1:1994/A11:1998/AC:1999 |
|
|
|
|
Cenelec |
EN 61010-1:2001 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements IEC 61010-1:2001 |
EN 61010-1:1993 + A2:1995 Note 2.1 |
Date expired (1.1.2004) |
|
EN 61010-1:2001/AC:2002 |
|
|
|
|
Cenelec |
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements IEC 61010-1:2010 |
EN 61010-1:2001 Note 2.1 |
Date expired (1.10.2013) |
|
Cenelec |
EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of material IEC 61010-2-010:2003 |
EN 61010-2-010:1994 + A1:1996 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges IEC 61010-2-020:2006 |
EN 61010-2-020:1994 + A1:1996 Note 2.1 |
Date expired (1.7.2009) |
|
Cenelec |
EN 61010-2-030:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits IEC 61010-2-030:2010 |
|
|
|
Cenelec |
EN 61010-2-032:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement IEC 61010-2-032:2002 |
EN 61010-2-032:1995 Note 2.1 |
Date expired (1.11.2005) |
|
Cenelec |
EN 61010-2-032:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement IEC 61010-2-032:2012 |
EN 61010-2-032:2002 Note 2.1 |
31.10.2015 |
|
Cenelec |
EN 61010-2-033:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage IEC 61010-2-033:2012 |
|
|
|
Cenelec |
EN 61010-2-040:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials IEC 61010-2-040:2005 |
EN 61010-2-041:1996 + EN 61010-2-042:1997 + EN 61010-2-043:1997 + EN 61010-2-045:2000 Note 2.1 |
Date expired (1.6.2008) |
|
Cenelec |
EN 61010-2-051:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring IEC 61010-2-051:2003 |
EN 61010-2-051:1995 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization IEC 61010-2-061:2003 |
EN 61010-2-061:1996 Note 2.1 |
Date expired (1.10.2006) |
|
Cenelec |
EN 61010-2-081:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes IEC 61010-2-081:2001 |
|
|
|
EN 61010-2-081:2002/A1:2003 IEC 61010-2-081:2001/A1:2003 |
Note 3 |
Date expired (1.10.2006) |
|
|
Cenelec |
EN 61010-2-091:2012 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems IEC 61010-2-091:2012 |
|
|
|
EN 61010-2-091:2012/AC:2013 |
|
|
|
|
Cenelec |
EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment IEC 61010-2-201:2013 |
EN 61131-2:2007 Note 2.1 |
1.4.2016 |
|
EN 61010-2-201:2013/AC:2013 |
|
|
|
|
Cenelec |
EN 61010-031:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test IEC 61010-031:2002 |
EN 61010-2-031:1994 Note 2.1 |
Date expired (1.2.2005) |
|
EN 61010-031:2002/A1:2008 IEC 61010-031:2002/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
Cenelec |
EN 61028:1993 Electrical measuring instruments - X-Y recorders IEC 61028:1991 |
|
|
|
EN 61028:1993/A2:1997 IEC 61028:1991/A2:1997 |
Note 3 |
Date expired (1.7.1998) |
|
|
Cenelec |
EN 61034-1:2005 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus IEC 61034-1:2005 |
EN 50268-1:1999 Note 2.1 |
Date expired (1.6.2008) |
|
Cenelec |
EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements IEC 61034-2:2005 |
EN 50268-2:1999 Note 2.1 |
Date expired (1.6.2008) |
|
EN 61034-2:2005/A1:2013 IEC 61034-2:2005/A1:2013 |
Note 3 |
25.6.2016 |
|
|
Cenelec |
EN 61048:2006 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements IEC 61048:2006 |
EN 61048:1993 + A1:1996 + A2:1999 Note 2.1 |
Date expired (1.5.2009) |
|
Cenelec |
EN 61050:1992 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (generally called neon-transformers) - General and safety requirements IEC 61050:1991 (Modified) |
|
|
|
EN 61050:1992/A1:1995 IEC 61050:1991/A1:1994 (Modified) |
Note 3 |
Date expired (1.7.1996) |
|
|
Cenelec |
EN 61058-1:2002 Switches for appliances - Part 1: General requirements IEC 61058-1:2000 (Modified) + A1:2001 |
EN 61058-1:1992 + A1:1993 Note 2.1 |
Date expired (1.3.2009) |
|
EN 61058-1:2002/A2:2008 IEC 61058-1:2000/A2:2007 |
Note 3 |
Date expired (1.12.2010) |
|
|
Cenelec |
EN 61058-2-1:1993 Switches for appliances - Part 2-1: Particular requirements for cord switches IEC 61058-2-1:1992 |
|
|
|
EN 61058-2-1:1993/A1:1996 IEC 61058-2-1:1992/A1:1995 |
Note 3 |
Date expired (1.9.1996) |
|
|
EN 61058-2-1:1993/A11:2002 |
Note 3 |
Date expired (1.3.2009) |
|
|
Cenelec |
EN 61058-2-1:2011 Switches for appliances - Part 2-1: Particular requirements for cord switches IEC 61058-2-1:2010 |
EN 61058-2-1:1993 and its amendments Note 2.1 |
1.1.2014 |
|
Cenelec |
EN 61058-2-4:2005 Switches for appliances - Part 2-4: Particular requirements for independently mounted switches IEC 61058-2-4:1995 + A1:2003 |
|
|
|
Cenelec |
EN 61058-2-5:1994 Switches for appliances - Part 2-5: Particular requirements for change-over selectors IEC 61058-2-5:1994 |
|
|
|
EN 61058-2-5:1994/A11:2002 |
Note 3 |
Date expired (1.3.2009) |
|
|
Cenelec |
EN 61058-2-5:2011 Switches for appliances - Part 2-5: Particular requirements for change-over selectors IEC 61058-2-5:2010 |
EN 61058-2-5:1994 and its amendment Note 2.1 |
3.1.2014 |
|
Cenelec |
EN 61071:2007 Capacitors for power electronics IEC 61071:2007 |
EN 61071-1:1996 + EN 61071-2:1996 Note 2.1 |
Date expired (1.4.2010) |
|
Cenelec |
EN 61095:2009 Electromechanical contactors for household and similar purposes IEC 61095:2009 |
EN 61095:1993 + A1:2000 Note 2.1 |
Date expired (1.3.2012) |
|
Cenelec |
EN 61131-2:2007 Programmable controllers - Part 2: Equipment requirements and tests IEC 61131-2:2007 |
EN 61131-2:2003 Note 2.1 |
Date expired (1.8.2010) |
|
Cenelec |
EN 61138:2007 Cables for portable earthing and short-circuiting equipment IEC 61138:2007 (Modified) |
EN 61138:1997 + A11:2003 Note 2.1 |
Date expired (1.10.2009) |
|
Cenelec |
EN 61140:2002 Protection against electric shock - Common aspects for installation and equipment IEC 61140:2001 |
|
|
|
EN 61140:2002/A1:2006 IEC 61140:2001/A1:2004 (Modified) |
Note 3 |
Date expired (1.5.2009) |
|
|
Cenelec |
EN 61143-1:1994 Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements IEC 61143-1:1992 |
|
|
|
EN 61143-1:1994/A1:1997 IEC 61143-1:1992/A1:1997 |
Note 3 |
Date expired (1.7.1998) |
|
|
Cenelec |
EN 61143-2:1994 Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods IEC 61143-2:1992 |
|
|
|
Cenelec |
EN 61167:1994 Metal halide lamps IEC 61167:1992 |
|
|
|
EN 61167:1994/A1:1995 IEC 61167:1992/A1:1995 |
Note 3 |
Date expired (1.3.1996) |
|
|
EN 61167:1994/A2:1997 IEC 61167:1992/A2:1997 |
Note 3 |
Date expired (1.4.1998) |
|
|
EN 61167:1994/A3:1998 IEC 61167:1992/A3:1998 |
Note 3 |
Date expired (1.7.2001) |
|
|
Cenelec |
EN 61184:2008 Bayonet lampholders IEC 61184:2008 |
EN 61184:1997 + A1:2001 + A2:2004 |
Date expired (1.8.2011) |
|
EN 61184:2008/A1:2011 IEC 61184:2008/A1:2011 + IEC |
Note 3 |
25.5.2014 |
|
|
Cenelec |
EN 61187:1994 Electrical and electronic measuring equipment - Documentation IEC 61187:1993 (Modified) |
|
|
|
EN 61187:1994/AC:1995 |
|
|
|
|
Cenelec |
EN 61195:1999 Double-capped fluorescent lamps - Safety specifications IEC 61195:1999 |
EN 61195:1994 + A1:1998 Note 2.1 |
Date expired (1.12.2002) |
|
EN 61195:1999/A1:2013 IEC 61195:1999/A1:2012 |
Note 3 |
16.11.2015 |
|
|
Cenelec |
EN 61199:1999 Single-capped fluorescent lamps - Safety specifications IEC 61199:1999 |
EN 61199:1994 + A1:1997 + A2:1998 Note 2.1 |
Date expired (1.12.2002) |
|
Cenelec |
EN 61199:2011 Single-capped fluorescent lamps - Safety specifications IEC 61199:2011 |
EN 61199:1999 Note 2.1 |
15.8.2014 |
|
EN 61199:2011/A1:2013 IEC 61199:2011/A1:2012 |
Note 3 |
1.11.2015 |
|
|
Cenelec |
EN 61204:1995 Low-voltage power supply devices, d.c. output - Performance characteristics IEC 61204:1993 (Modified) |
|
|
|
Cenelec |
EN 61204-7:2006 Low voltage power supplies, d.c. output - Part 7: Safety requirements IEC 61204-7:2006 |
|
|
|
EN 61204-7:2006/A11:2009 |
Note 3 |
Date expired (1.6.2012) |
|
|
Cenelec |
EN 61210:1995 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements IEC 61210:1993 (Modified) |
|
|
|
Cenelec |
EN 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements IEC 61210:2010 (Modified) |
EN 61210:1995 Note 2.1 |
Date expired (1.11.2013) |
|
Cenelec |
EN 61230:2008 Live working - Portable equipment for earthing or earthing and short-circuiting IEC 61230:2008 |
EN 61230:1995 + A11:1999 Note 2.1 |
Date expired (1.10.2011) |
|
Cenelec |
EN 61236:1995 Saddles, pole clamps (stick clamps) and accessories for live working IEC 61236:1993 (Modified) |
|
|
|
Cenelec |
EN 61242:1997 Electrical accessories - Cable reels for household and similar purposes IEC 61242:1995 (Modified) |
|
|
|
EN 61242:1997/A1:2008 IEC 61242:1995/A1:2008 |
Note 3 |
Date expired (1.3.2011) |
|
|
EN 61242:1997/A1:2008/AC:2010 |
|
|
|
|
EN 61242:1997 covers the safety objectives of directive 2006/95/EC only if, in conjunction, Commission Opinion 2003/C 297/06 is taken into account. |
|||
|
Cenelec |
EN 61243-3:2010 Live working - Voltage detectors - Part 3: Two-pole low-voltage type IEC 61243-3:2009 |
EN 61243-3:1998 Note 2.1 |
Date expired (1.5.2013) |
|
Cenelec |
EN 61270-1:1996 Capacitors for microwave ovens - Part 1: General IEC 61270-1:1996 |
|
|
|
Cenelec |
EN 61293:1994 Marking of electrical equipment with ratings related to electrical supply - Safety requirements IEC 61293:1994 |
|
|
|
Cenelec |
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals IEC 61310-1:2007 |
EN 61310-1:1995 Note 2.1 |
Date expired (1.12.2010) |
|
Cenelec |
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking IEC 61310-2:2007 |
EN 61310-2:1995 Note 2.1 |
Date expired (1.12.2010) |
|
Cenelec |
EN 61310-3:2008 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators IEC 61310-3:2007 |
EN 61310-3:1999 Note 2.1 |
Date expired (1.12.2010) |
|
Cenelec |
EN 61316:1999 Industrial cable reels IEC 61316:1999 |
|
|
|
Cenelec |
EN 61347-1:2008 Lamp controlgear - Part 1: General and safety requirements IEC 61347-1:2007 (Modified) |
EN 61347-1:2001 + A1:2008 Note 2.1 |
Date expired (1.5.2011) |
|
EN 61347-1:2008/A1:2011 IEC 61347-1:2007/A1:2010 |
Note 3 |
1.2.2014 |
|
|
EN 61347-1:2008/A2:2013 IEC 61347-1:2007/A2:2012 |
Note 3 |
1.1.2016 |
|
|
Cenelec |
EN 61347-2-2:2001 Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps IEC 61347-2-2:2000 |
EN 61046:1994 + A1:1996 Note 2.1 |
Date expired (1.12.2006) |
|
EN 61347-2-2:2001/A1:2006 IEC 61347-2-2:2000/A1:2005 |
Note 3 |
Date expired (1.2.2009) |
|
|
EN 61347-2-2:2001/A2:2006 IEC 61347-2-2:2000/A2:2006 |
Note 3 |
Date expired (1.6.2009) |
|
|
EN 61347-2-2:2001/AC:2003 |
|
|
|
|
EN 61347-2-2:2001/A1:2006/AC:2006 |
|
|
|
|
EN 61347-2-2:2001/AC:2010 |
|
|
|
|
Cenelec |
EN 61347-2-2:2012 Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps IEC 61347-2-2:2011 |
EN 61347-2-2:2001 and its amendments Note 2.1 |
11.1.2015 |
|
Cenelec |
EN 61347-2-3:2001 Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps IEC 61347-2-3:2000 |
EN 60928:1995 + A1:1999 Note 2.1 |
Date expired (1.12.2006) |
|
EN 61347-2-3:2001/A1:2004 IEC 61347-2-3:2000/A1:2004 |
Note 3 |
Date expired (1.9.2007) |
|
|
EN 61347-2-3:2001/A2:2006 IEC 61347-2-3:2000/A2:2006 |
Note 3 |
Date expired (1.2.2009) |
|
|
EN 61347-2-3:2001/AC:2003 |
|
|
|
|
EN 61347-2-3:2001/AC:2010 |
|
|
|
|
Cenelec |
EN 61347-2-3:2011 Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps IEC 61347-2-3:2011 |
EN 61347-2-3:2001 and its amendments + EN 61347-2-4:2001 Note 2.1 |
23.6.2014 |
|
EN 61347-2-3:2011/AC:2011 |
|
|
|
|
Cenelec |
EN 61347-2-4:2001 Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting IEC 61347-2-4:2000 |
EN 60924:1991 + A1:1994 Note 2.1 |
Date expired (1.12.2006) |
|
EN 61347-2-4:2001/AC:2010 |
|
|
|
|
EN 61347-2-4:2001/AC:2003 |
|
|
|
|
Cenelec |
EN 61347-2-7:2006 Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting IEC 61347-2-7:2006 |
EN 61347-2-7:2001 Note 2.1 |
Date expired (1.11.2009) |
|
EN 61347-2-7:2006/AC:2010 |
|
|
|
|
Cenelec |
EN 61347-2-7:2012 Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) IEC 61347-2-7:2011 |
EN 61347-2-7:2006 Note 2.1 |
11.1.2015 |
|
Cenelec |
EN 61347-2-8:2001 Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps IEC 61347-2-8:2000 |
EN 60920:1991 + A1:1993 + A2:1996 + A11:2000 Note 2.1 |
Date expired (1.12.2006) |
|
EN 61347-2-8:2001/A1:2006 IEC 61347-2-8:2000/A1:2006 |
Note 3 |
Date expired (1.2.2009) |
|
|
EN 61347-2-8:2001/AC:2010 |
|
|
|
|
EN 61347-2-8:2001/AC:2003 |
|
|
|
|
Cenelec |
EN 61347-2-9:2001 Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) IEC 61347-2-9:2000 |
EN 60922:1997 Note 2.1 |
Date expired (1.12.2006) |
|
EN 61347-2-9:2001/A1:2003 IEC 61347-2-9:2000/A1:2003 |
Note 3 |
Date expired (1.12.2010) |
|
|
EN 61347-2-9:2001/A2:2006 IEC 61347-2-9:2000/A2:2006 |
Note 3 |
Date expired (1.7.2009) |
|
|
EN 61347-2-9:2001/AC:2003 |
|
|
|
|
EN 61347-2-9:2001/AC:2010 |
|
|
|
|
Cenelec |
EN 61347-2-9:2013 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) IEC 61347-2-9:2012 |
EN 61347-2-9:2001 and its amendments Note 2.1 |
4.12.2015 |
|
Cenelec |
EN 61347-2-10:2001 Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) IEC 61347-2-10:2000 |
|
|
|
EN 61347-2-10:2001/A1:2009 IEC 61347-2-10:2000/A1:2008 |
Note 3 |
Date expired (1.12.2011) |
|
|
EN 61347-2-10:2001/AC:2010 |
|
|
|
|
Cenelec |
EN 61347-2-11:2001 Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires IEC 61347-2-11:2001 |
|
|
|
EN 61347-2-11:2001/AC:2010 |
|
|
|
|
EN 61347-2-11:2001/AC:2002 |
|
|
|
|
Cenelec |
EN 61347-2-12:2005 Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) IEC 61347-2-12:2005 |
|
|
|
EN 61347-2-12:2005/A1:2010 IEC 61347-2-12:2005/A1:2010 |
Note 3 |
Date expired (1.11.2013) |
|
|
EN 61347-2-12:2005/AC:2010 |
|
|
|
|
Cenelec |
EN 61347-2-13:2006 Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules IEC 61347-2-13:2006 |
|
|
|
EN 61347-2-13:2006/AC:2010 |
|
|
|
|
Cenelec |
EN 61386-1:2008 Conduit systems for cable management - Part 1: General requirements IEC 61386-1:2008 |
EN 61386-1:2004 Note 2.1 |
Date expired (1.6.2011) |
|
Cenelec |
EN 61386-21:2004 Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems IEC 61386-21:2002 |
EN 50086-2-1:1995 + A11:1998 Note 2.1 |
Date expired (30.6.2008) |
|
EN 61386-21:2004/A11:2010 |
Note 3 |
1.12.2013 |
|
|
EN 61386-21:2004/AC:2004 |
|
|
|
|
Cenelec |
EN 61386-22:2004 Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systems IEC 61386-22:2002 |
EN 50086-2-2:1995 + A11:1998 Note 2.1 |
Date expired (30.6.2008) |
|
EN 61386-22:2004/A11:2010 |
Note 3 |
1.12.2013 |
|
|
EN 61386-22:2004/AC:2004 |
|
|
|
|
Cenelec |
EN 61386-23:2004 Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems IEC 61386-23:2002 |
EN 50086-2-3:1995 + A11:1998 Note 2.1 |
Date expired (30.6.2008) |
|
EN 61386-23:2004/A11:2010 |
Note 3 |
1.12.2013 |
|
|
EN 61386-23:2004/AC:2004 |
|
|
|
|
Cenelec |
EN 61386-24:2010 Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground IEC 61386-24:2004 |
EN 50086-2-4:1994 and its amendment Note 2.1 |
Date expired (1.10.2013) |
|
Cenelec |
EN 61386-25:2011 Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices IEC 61386-25:2011 |
|
|
|
Cenelec |
EN 61439-1:2009 Low-voltage switchgear and controlgear assemblies - Part 1: General rules IEC 61439-1:2009 (Modified) |
EN 60439-1:1999 and its amendment Note 2.1 |
1.11.2014 |
|
EN 61439-1:2009/AC:2013 |
|
|
|
|
Cenelec |
EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules IEC 61439-1:2011 |
EN 61439-1:2009 Note 2.1 |
23.9.2014 |
|
Cenelec |
EN 61439-2:2009 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies IEC 61439-2:2009 |
|
|
|
Cenelec |
EN 61439-2:2011 Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies IEC 61439-2:2011 |
EN 61439-2:2009 Note 2.1 |
23.9.2014 |
|
Cenelec |
EN 61439-3:2012 Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO) IEC 61439-3:2012 |
EN 60439-3:1991 and its amendments Note 2.1 |
22.3.2015 |
|
Cenelec |
EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) IEC 61439-4:2012 |
EN 60439-4:2004 Note 2.1 |
20.12.2015 |
|
Cenelec |
EN 61439-5:2011 Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks IEC 61439-5:2010 |
EN 60439-5:2006 Note 2.1 |
3.1.2016 |
|
Cenelec |
EN 61439-6:2012 Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways) IEC 61439-6:2012 |
EN 60439-2:2000 and its amendment Note 2.1 |
27.6.2015 |
|
Cenelec |
EN 61534-1:2003 Powertrack systems - Part 1: General requirements IEC 61534-1:2003 |
|
|
|
Cenelec |
EN 61534-1:2011 Powertrack systems - Part 1: General requirements IEC 61534-1:2011 |
EN 61534-1:2003 Note 2.1 |
22.6.2014 |
|
Cenelec |
EN 61534-21:2006 Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting IEC 61534-21:2006 |
|
|
|
Cenelec |
EN 61534-22:2009 Powertrack systems - Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation IEC 61534-22:2009 |
|
|
|
Cenelec |
EN 61535:2009 Installation couplers intended for permanent connection in fixed installations IEC 61535:2009 (Modified) |
|
|
|
EN 61535:2009/A1:2013 IEC 61535:2009/A1:2012 |
Note 3 |
20.6.2015 |
|
|
Cenelec |
EN 61537:2007 Cable management - Cable tray systems and cable ladder systems IEC 61537:2006 |
EN 61537:2001 Note 2.1 |
Date expired (1.12.2009) |
|
Cenelec |
EN 61549:2003 Miscellaneous lamps IEC 61549:2003 |
EN 61549:1996 + A1:1997 + A2:2001 Note 2.1 |
Date expired (1.6.2006) |
|
EN 61549:2003/A1:2005 IEC 61549:2003/A1:2005 |
Note 3 |
Date expired (1.4.2008) |
|
|
EN 61549:2003/A2:2010 IEC 61549:2003/A2:2010 |
Note 3 |
Date expired (1.5.2013) |
|
|
EN 61549:2003/A3:2012 IEC 61549:2003/A3:2012 |
Note 3 |
9.8.2015 |
|
|
Cenelec |
EN 61557-1:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements IEC 61557-1:2007 |
EN 61557-1:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-2:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance IEC 61557-2:2007 |
EN 61557-2:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-3:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance IEC 61557-3:2007 |
EN 61557-3:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-4:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding IEC 61557-4:2007 |
EN 61557-4:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-5:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth IEC 61557-5:2007 |
EN 61557-5:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-6:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems IEC 61557-6:2007 |
EN 61557-6:1998 Note 2.1 |
Date expired (1.10.2010) |
|
Cenelec |
EN 61557-7:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence IEC 61557-7:2007 |
EN 61557-7:1997 Note 2.1 |
Date expired (1.3.2010) |
|
Cenelec |
EN 61557-8:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems IEC 61557-8:2007 |
EN 61557-8:1997 Note 2.1 |
Date expired (1.5.2010) |
|
Cenelec |
EN 61557-9:2009 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems IEC 61557-9:2009 |
EN 61557-9:1999 Note 2.1 |
Date expired (1.2.2012) |
|
Cenelec |
EN 61557-10:2001 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures IEC 61557-10:2000 |
|
|
|
Cenelec |
EN 61557-10:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures IEC 61557-10:2013 |
EN 61557-10:2001 Note 2.1 |
3.6.2016 |
|
Cenelec |
EN 61557-11:2009 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems IEC 61557-11:2009 |
|
|
|
Cenelec |
EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) IEC 61557-12:2007 |
|
|
|
Cenelec |
EN 61557-13:2011 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems IEC 61557-13:2011 |
|
|
|
Cenelec |
EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery IEC 61557-14:2013 |
|
|
|
Cenelec |
EN 61558-1:1997 Safety of power transformers, power supply units and similar - Part 1: General requirements and tests IEC 61558-1:1997 (Modified) |
EN 60742:1995 Note 2.1 |
Date expired (1.12.2005) |
|
EN 61558-1:1997/A1:1998 IEC 61558-1:1997/A1:1998 |
Note 3 |
Date expired (1.1.2001) |
|
|
EN 61558-1:1997/A11:2003 |
Note 3 |
Date expired (1.12.2005) |
|
|
Cenelec |
EN 61558-1:2005 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests IEC 61558-1:2005 |
EN 61558-1:1997 and its amendments Note 2.1 |
Date expired (1.12.2005) |
|
EN 61558-1:2005/A1:2009 IEC 61558-1:2005/A1:2009 |
Note 3 |
Date expired (1.3.2012) |
|
|
EN 61558-1:2005/AC:2006 |
|
|
|
|
Cenelec |
EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications IEC 61558-2-1:2007 |
EN 61558-2-1:1997 Note 2.1 |
Date expired (1.2.2010) |
|
Cenelec |
EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers IEC 61558-2-2:2007 |
EN 61558-2-2:1998 Note 2.1 |
Date expired (1.2.2010) |
|
Cenelec |
EN 61558-2-3:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners IEC 61558-2-3:2010 |
EN 61558-2-3:2000 Note 2.1 |
Date expired (1.7.2013) |
|
Cenelec |
EN 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers IEC 61558-2-4:2009 |
EN 61558-2-4:1997 Note 2.1 |
Date expired (1.3.2012) |
|
Cenelec |
EN 61558-2-5:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units IEC 61558-2-5:2010 |
EN 61558-2-5:1998 + A11:2004 |
Date expired (1.7.2013) |
|
Cenelec |
EN 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers IEC 61558-2-6:2009 |
EN 61558-2-6:1997 Note 2.1 |
Date expired (1.7.2012) |
|
Cenelec |
EN 61558-2-7:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys IEC 61558-2-7:2007 (Modified) |
EN 61558-2-7:1997 + A11:2002 Note 2.1 |
Date expired (1.9.2010) |
|
Cenelec |
EN 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes IEC 61558-2-8:2010 |
EN 61558-2-8:1998 Note 2.1 |
Date expired (1.7.2013) |
|
Cenelec |
EN 61558-2-9:2003 Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps IEC 61558-2-9:2002 |
EN 60742:1995 Note 2.1 |
Date expired (1.12.2005) |
|
Cenelec |
EN 61558-2-9:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps IEC 61558-2-9:2010 |
EN 61558-2-9:2003 Note 2.1 |
2.1.2014 |
|
Cenelec |
EN 61558-2-12:2001 Safety of power transformers, power supply units and similar devices - Part 2-12: Particular requirements for constant voltage transformers IEC 61558-2-12:2001 |
|
|
|
Cenelec |
EN 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage IEC 61558-2-12:2011 |
EN 61558-2-12:2001 Note 2.1 |
3.3.2014 |
|
Cenelec |
EN 61558-2-13:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers IEC 61558-2-13:2009 |
EN 61558-2-13:2000 Note 2.1 |
Date expired (1.3.2012) |
|
Cenelec |
EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers IEC 61558-2-14:2012 |
|
|
|
Cenelec |
EN 61558-2-15:2001 Safety of power transformers, power supply units and similar - Part 2-15: Particular requirements for isolating transformers for the supply of medical locations IEC 61558-2-15:1999 (Modified) |
|
|
|
EN 61558-2-15:2001/AC:2004 |
|
|
|
|
Cenelec |
EN 61558-2-15:2012 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations IEC 61558-2-15:2011 |
EN 61558-2-15:2001 Note 2.1 |
27.12.2014 |
|
Cenelec |
EN 61558-2-16:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units IEC 61558-2-16:2009 |
EN 61558-2-17:1997 Note 2.1 |
Date expired (1.10.2012) |
|
Cenelec |
EN 61558-2-20:2000 Safety of power transformers, power supply units and similar devices - Part 2-20: Particular requirements for small reactors IEC 61558-2-20:2000 |
|
|
|
Cenelec |
EN 61558-2-20:2011 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors IEC 61558-2-20:2010 |
EN 61558-2-20:2000 Note 2.1 |
2.1.2014 |
|
Cenelec |
EN 61558-2-23:2000 Safety of power transformers, power supply units and similar devices - Part 2-23: Particular requirements for transformers for construction sites IEC 61558-2-23:2000 |
|
|
|
Cenelec |
EN 61558-2-23:2010 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites IEC 61558-2-23:2010 |
EN 61558-2-23:2000 Note 2.1 |
Date expired (1.10.2013) |
|
Cenelec |
EN 61558-2-26:2013 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes IEC 61558-2-26:2013 |
|
|
|
Cenelec |
EN 61643-11:2002 Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and tests IEC 61643-1:1998 (Modified) |
|
|
|
EN 61643-11:2002/A11:2007 |
Note 3 |
Date expired (1.7.2009) |
|
|
Cenelec |
EN 61643-11:2012 Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods IEC 61643-11:2011 (Modified) |
EN 61643-11:2002 and its amendment Note 2.1 |
27.8.2015 |
|
Cenelec |
EN 61643-21:2001 Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods IEC 61643-21:2000 |
|
|
|
EN 61643-21:2001/A1:2009 IEC 61643-21:2000/A1:2008 (Modified) |
Note 3 |
Date expired (1.3.2012) |
|
|
EN 61643-21:2001/A2:2013 IEC 61643-21:2000/A2:2012 |
Note 3 |
31.8.2015 |
|
|
Cenelec |
EN 61730-1:2007 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction IEC 61730-1:2004 (Modified) |
|
|
|
EN 61730-1:2007/A1:2012 IEC 61730-1:2004/A1:2011 |
Note 3 |
19.12.2014 |
|
|
EN 61730-1:2007/A2:2013 IEC 61730-1:2004/A2:2013 |
Note 3 |
18.4.2016 |
|
|
Cenelec |
EN 61730-2:2007 Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing IEC 61730-2:2004 (Modified) |
|
|
|
EN 61730-2:2007/A1:2012 IEC 61730-2:2004/A1:2011 |
Note 3 |
19.12.2014 |
|
|
Cenelec |
EN 61770:2009 Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets IEC 61770:2008 |
EN 61770:1999 + A1:2004 + A2:2006 Note 2.1 |
Date expired (1.5.2012) |
|
EN 61770:2009/AC:2011 |
|
|
|
|
Cenelec |
EN 61800-5-1:2007 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy IEC 61800-5-1:2007 |
EN 61800-5-1:2003 Note 2.1 |
Date expired (1.8.2010) |
|
Cenelec |
EN 61812-1:1996 Specified time relays for industrial use - Part 1: Requirements and tests IEC 61812-1:1996 |
|
|
|
EN 61812-1:1996/A11:1999 |
Note 3 |
Date expired (1.1.2002) |
|
|
EN 61812-1:1996/AC:1999 |
|
|
|
|
Cenelec |
EN 61812-1:2011 Time relays for industrial and residential use - Part 1: Requirements and tests IEC 61812-1:2011 |
EN 61812-1:1996 and its amendment Note 2.1 |
29.6.2014 |
|
Cenelec |
EN 61851-1:2001 Electric vehicle conductive charging system - Part 1: General requirements IEC 61851-1:2001 |
|
|
|
Cenelec |
EN 61851-1:2011 Electric vehicle conductive charging system - Part 1: General requirements IEC 61851-1:2010 |
EN 61851-1:2001 Note 2.1 |
1.4.2014 |
|
Cenelec |
EN 61851-21:2002 Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply IEC 61851-21:2001 |
|
|
|
Cenelec |
EN 61851-22:2002 Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station IEC 61851-22:2001 |
|
|
|
Cenelec |
EN 61869-1:2009 Instrument transformers - Part 1: General requirements IEC 61869-1:2007 (Modified) |
|
|
|
Cenelec |
EN 61869-2:2012 Instrument transformers - Part 2: Additional requirements for current transformers IEC 61869-2:2012 |
|
|
|
Cenelec |
EN 61869-3:2011 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers IEC 61869-3:2011 |
|
|
|
Cenelec |
EN 61869-5:2011 Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers IEC 61869-5:2011 |
|
|
|
Cenelec |
EN 61914:2009 Cable cleats for electrical installations IEC 61914:2009 |
EN 50368:2003 Note 2.1 |
Date expired (1.4.2012) |
|
EN 61914:2009/AC:2009 |
|
|
|
|
Cenelec |
EN 61921:2003 Power capacitors - Low-voltage power factor correction banks IEC 61921:2003 |
|
|
|
Cenelec |
EN 61995-1:2008 Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements IEC 61995-1:2005 (Modified) |
|
|
|
Cenelec |
EN 61995-2:2009 Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL IEC 61995-2:2009 |
|
|
|
Cenelec |
EN 62020:1998 Electrical accessories - Residual current monitors for household and similar uses (RCMs) IEC 62020:1998 |
|
|
|
EN 62020:1998/A1:2005 IEC 62020:1998/A1:2003 (Modified) |
Note 3 |
Date expired (1.3.2008) |
|
|
Cenelec |
EN 62026-1:2007 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules IEC 62026-1:2007 |
|
|
|
Cenelec |
EN 62026-2:2013 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) IEC 62026-2:2008 (Modified) |
|
|
|
Cenelec |
EN 62026-3:2009 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet IEC 62026-3:2008 |
|
|
|
Cenelec |
EN 62026-7:2013 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet IEC 62026-7:2010 (Modified) |
|
|
|
Cenelec |
EN 62031:2008 LED modules for general lighting - Safety specifications IEC 62031:2008 |
|
|
|
EN 62031:2008/A1:2013 IEC 62031:2008/A1:2012 |
Note 3 |
3.12.2015 |
|
|
Cenelec |
EN 62035:2000 Discharge lamps (excluding fluorescent lamps) - Safety specifications IEC 62035:1999 (Modified) |
|
|
|
EN 62035:2000/A1:2003 IEC 62035:1999/A1:2003 (Modified) |
Note 3 |
Date expired (1.10.2006) |
|
|
EN 62035:2000/A2:2012 IEC 62035:1999/A2:2012 |
Note 3 |
31.8.2015 |
|
|
Cenelec |
EN 62040-1:2008 Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS IEC 62040-1:2008 |
EN 62040-1-1:2003 + EN 62040-1-2:2003 Note 2.1 |
Date expired (1.9.2011) |
|
EN 62040-1:2008/A1:2013 IEC 62040-1:2008/A1:2013 |
Note 3 |
14.2.2016 |
|
|
EN 62040-1:2008/AC:2009 |
|
|
|
|
Cenelec |
EN 62080:2009 Sound signalling devices for household and similar purposes IEC 62080:2001 + A1:2008 |
|
|
|
Cenelec |
EN 62094-1:2003 Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements IEC 62094-1:2002 |
|
|
|
EN 62094-1:2003/A11:2003 |
Note 3 |
Date expired (1.7.2006) |
|
|
Cenelec |
EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems - Part 1: General requirements IEC 62109-1:2010 |
|
|
|
Cenelec |
EN 62109-2:2011 Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters IEC 62109-2:2011 |
|
|
|
Cenelec |
EN 62135-1:2008 Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation IEC 62135-1:2008 |
EN 50063:1989 Note 2.1 |
Date expired (1.10.2011) |
|
Cenelec |
EN 62196-1:2003 Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. IEC 62196-1:2003 |
|
|
|
Cenelec |
EN 62196-1:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements IEC 62196-1:2011 |
EN 62196-1:2003 Note 2.1 |
1.2.2015 |
|
EN 62196-1:2012/A11:2013 |
Note 3 |
15.10.2017 |
|
|
EN 62196-1:2012/AC:2012 |
|
|
|
|
Cenelec |
EN 62196-2:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories IEC 62196-2:2011 |
|
|
|
EN 62196-2:2012/A11:2013 |
Note 3 |
15.10.2017 |
|
|
Cenelec |
EN 62208:2003 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements IEC 62208:2002 |
EN 50298:1998 Note 2.1 |
Date expired (1.12.2006) |
|
Cenelec |
EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements IEC 62208:2011 |
EN 62208:2003 Note 2.1 |
23.9.2014 |
|
Cenelec |
EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure IEC 62233:2005 (Modified) |
EN 50366:2003 + A1:2006 Note 2.1 |
Date expired (1.12.2012) |
|
EN 62233:2008/AC:2008 |
|
|
|
|
Cenelec |
EN 62253:2011 Photovoltaic pumping systems - Design qualification and performance measurements IEC 62253:2011 |
|
|
|
Cenelec |
EN 62275:2009 Cable management systems - Cable ties for electrical installations IEC 62275:2006 (Modified) |
EN 50146:2000 Note 2.1 |
Date expired (1.7.2012) |
|
Cenelec |
EN 62282-3-1:2007 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety IEC 62282-3-1:2007 |
|
|
|
Cenelec |
EN 62282-3-3:2008 Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation IEC 62282-3-3:2007 |
|
|
|
Cenelec |
EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety IEC 62282-3-100:2012 |
EN 62282-3-1:2007 Note 2.1 |
22.3.2015 |
|
Cenelec |
EN 62282-3-300:2012 Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation IEC 62282-3-300:2012 |
EN 62282-3-3:2008 Note 2.1 |
19.7.2015 |
|
Cenelec |
EN 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety IEC 62282-5-1:2012 |
|
|
|
Cenelec |
EN 62310-1:2005 Static transfer systems (STS) - Part 1: General and safety requirements IEC 62310-1:2005 |
|
|
|
Cenelec |
EN 62311:2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) IEC 62311:2007 (Modified) |
|
|
|
Cenelec |
EN 62395-1:2006 Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements IEC 62395-1:2006 |
|
|
|
Cenelec |
EN 62423:2009 Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs) IEC 62423:2007 (Modified) |
|
|
|
Cenelec |
EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses IEC 62423:2009 (Modified) |
EN 62423:2009 Note 2.1 |
19.6.2017 |
|
Cenelec |
EN 62471:2008 Photobiological safety of lamps and lamp systems IEC 62471:2006 (Modified) |
EN 60825-1:1994 + A1:2002 + A2:2001 Note 2.1 |
Date expired (1.9.2011) |
|
Cenelec |
EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) IEC 62479:2010 (Modified) |
EN 50371:2002 Note 2.1 |
Date expired (1.9.2013) |
|
Cenelec |
EN 62493:2010 Assessment of lighting equipment related to human exposure to electromagnetic fields IEC 62493:2009 |
|
|
|
Cenelec |
EN 62532:2011 Fluorescent induction lamps - Safety specifications IEC 62532:2011 |
|
|
|
Cenelec |
EN 62549:2011 Articulated systems and flexible systems for cable guiding IEC 62549:2011 |
|
|
|
Cenelec |
EN 62560:2012 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications IEC 62560:2011 (Modified) |
|
|
|
Cenelec |
HD 21.1 S4:2002 Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 1: General requirements |
HD 21.1 S3:1997 Note 2.1 |
Date expired (1.9.2003) |
|
Cenelec |
HD 21.3 S3:1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring IEC 60227-3:1993 (Modified) |
|
|
|
HD 21.3 S3:1995/A1:1999 |
Note 3 |
Date expired (1.8.2001) |
|
|
HD 21.3 S3:1995/A2:2008 |
Note 3 |
Date expired (1.9.2010) |
|
|
Cenelec |
HD 21.4 S2:1990 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring IEC 60227-4:1979 (Modified) |
|
|
|
Cenelec |
HD 21.5 S3:1994 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) IEC 60227-5:1979 (Modified) |
|
|
|
HD 21.5 S3:1994/A1:1999 |
Note 3 |
Date expired (1.8.2001) |
|
|
HD 21.5 S3:1994/A2:2001 |
Note 3 |
Date expired (1.4.2003) |
|
|
Cenelec |
HD 21.7 S2:1996 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Single core non-sheathed cables for internal wiring for a conductor temperature of 90° C |
HD 21.7 S1:1990 + A1:1992 + A2:1993 Note 2.1 |
Date expired (1.9.1996) |
|
HD 21.7 S2:1996/A1:1999 |
Note 3 |
Date expired (1.8.2001) |
|
|
Cenelec |
HD 21.8 S2:1999 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 8: Single core non-sheathed cables for decorative chains |
HD 21.8 S1:1990 + A2:1994 Note 2.1 |
Date expired (1.8.2001) |
|
Cenelec |
HD 21.9 S2:1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cable for installation at low temperatures |
|
|
|
HD 21.9 S2:1995/A1:1999 |
Note 3 |
Date expired (1.8.2001) |
|
|
Cenelec |
HD 21.10 S2:2001 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 10: Extensible leads |
HD 21.10 S1:1993 Note 2.1 |
Date expired (1.8.2003) |
|
Cenelec |
HD 21.11 S1:1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 11: Cables for luminaires |
|
|
|
HD 21.11 S1:1995/A1:2001 |
Note 3 |
Date expired (1.8.2003) |
|
|
Cenelec |
HD 21.12 S1:1994 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 12: Heat-resistant flexible cables (cords) |
|
|
|
HD 21.12 S1:1994/A1:2001 |
Note 3 |
Date expired (1.8.2003) |
|
|
Cenelec |
HD 21.13 S1:1995 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 13: Oil resistant PVC sheathed cables with two or more conductors |
|
|
|
HD 21.13 S1:1995/A1:2001 |
Note 3 |
Date expired (1.8.2003) |
|
|
Cenelec |
HD 21.14 S1:2003 Cables of rated voltage up to and including 450/750 V and having thermoplastic insulation - Part 14: Flexible cables (cords), insulated and sheathed with halogen-free thermoplastic compounds |
|
|
|
Cenelec |
HD 21.15 S1:2006 Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation - Part 15: Single core cables, insulated with halogen-free thermoplastic compound, for fixed wiring |
|
|
|
Cenelec |
HD 22.1 S4:2002 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 1: General requirements |
HD 22.1 S3:1997 Note 2.1 |
Date expired (1.9.2003) |
|
Cenelec |
HD 22.3 S4:2004 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 3: Heat resistant silicone rubber insulated cables |
HD 22.3 S3:1995 + A1:1999 Note 2.1 |
Date expired (1.2.2006) |
|
HD 22.3 S4:2004/A1:2006 |
Note 3 |
Date expired (1.12.2007) |
|
|
Cenelec |
HD 22.4 S4:2004 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 4: Cords and flexible cables |
HD 22.4 S3:1995 + A1:1999 + A2:2002 Note 2.1 |
Date expired (1.2.2006) |
|
Cenelec |
HD 22.6 S2:1995 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 6: Arc welding cables |
HD 22.6 S1:1990 Note 2.1 |
Date expired (1.7.1996) |
|
HD 22.6 S2:1995/A1:1999 |
Note 3 |
Date expired (1.6.2000) |
|
|
HD 22.6 S2:1995/A2:2004 |
Note 3 |
Date expired (1.2.2006) |
|
|
HD 22.6 S2:1995/AC:1995 |
|
|
|
|
Cenelec |
HD 22.7 S2:1995 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 7: Cables with increased heat resistance for internal wiring for a conductor temperature of 110 °C |
HD 22.7 S1:1992 Note 2.1 |
Date expired (1.7.1996) |
|
HD 22.7 S2:1995/A1:1999 |
Note 3 |
Date expired (1.6.2000) |
|
|
HD 22.7 S2:1995/A2:2004 |
Note 3 |
Date expired (1.2.2006) |
|
|
Cenelec |
HD 22.8 S2:1994 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 8: Polychloroprene or equivalent synthetic elastomer sheathed cable for decorative chains |
|
|
|
HD 22.8 S2:1994/A1:1999 |
Note 3 |
Date expired (1.6.2000) |
|
|
HD 22.8 S2:1994/A2:2004 |
Note 3 |
Date expired (1.2.2006) |
|
|
Cenelec |
HD 22.9 S3:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 9: Single core halogen-free non-sheathed cables for fixed wiring having low emission of smoke |
HD 22.9 S2:1995 + A1:1999 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 22.10 S2:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 10: EPR insulated and polyurethane sheathed flexible cables |
HD 22.10 S1:1994 + A1:1999 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 22.11 S2:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 11: EVA cords and flexible cables |
HD 22.11 S1:1995 + A1:1999 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 22.12 S2:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 12: Heat resistant EPR cords and flexible cables |
HD 22.12 S1:1996 + A1:1999 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 22.13 S2:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 13: Halogen-free flexible cables having low emission of smoke |
HD 22.13 S1:1996 + A1:2000 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 22.15 S2:2007 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 15: Multicore cables insulated and sheathed with heat resistant silicone rubber |
HD 22.15 S1:1999 Note 2.1 |
Date expired (1.12.2008) |
|
Cenelec |
HD 308 S2:2001 Identification of cores in cables and flexible cords |
HD 308 S1:1976 Note 2.1 |
Date expired (1.4.2006) |
|
Cenelec |
HD 361 S3:1999 System for cable designation |
|
|
|
HD 361 S3:1999/A1:2006 |
Note 3 |
Date expired (1.6.2009) |
|
|
HD 361 S3:1999/AC:1999 |
|
|
|
|
Cenelec |
HD 368 S1:1978 Direct acting recording electrical measuring instruments and their accessories IEC 60258:1968 + A1:1976 |
|
|
|
Cenelec |
HD 516 S2:1997 Guide to use of low voltage harmonized cables |
|
|
|
HD 516 S2:1997/A1:2003 |
Note 3 |
Date expired (1.2.2005) |
|
|
HD 516 S2:1997/A2:2008 |
Note 3 |
Date expired (1.9.2010) |
|
|
Cenelec |
HD 549 S1:1989 Conference systems - Electrical and audio requirements IEC 60914:1988 |
|
|
|
Cenelec |
HD 597 S1:1992 Coupling capacitors and capacitor dividers IEC 60358:1990 |
|
|
|
HD 597 S1:1992/AC:1992 |
|
|
|
|
Cenelec |
HD 603 S1:1994 Distribution cables of rated voltage 0,6/1 kV |
|
|
|
HD 603 S1:1994/A1:1997 |
Note 3 |
Date expired (1.9.1998) |
|
|
HD 603 S1:1994/A2:2003 |
Note 3 |
Date expired (1.2.2006) |
|
|
HD 603 S1:1994/A3:2007 |
Note 3 |
Date expired (1.11.2009) |
|
|
Cenelec |
HD 604 S1:1994 0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations |
|
|
|
HD 604 S1:1994/A1:1997 |
Note 3 |
Date expired (1.12.1997) |
|
|
HD 604 S1:1994/A2:2002 |
Note 3 |
Date expired (1.7.2005) |
|
|
HD 604 S1:1994/A3:2005 |
Note 3 |
Date expired (1.6.2008) |
|
|
Cenelec |
HD 605 S2:2008 Electric cables - Additional test methods |
HD 605 S1:1994 + A1:1996 + A2:2001 + A3:2002 + A4:2004 Note 2.1 |
Date expired (1.3.2009) |
|
HD 605 S2:2008/AC:2010 |
|
|
|
|
Cenelec |
HD 626 S1:1996 Overhead distribution cables of rated voltage Uo/U(Um): 0,6/1 (1,2) kV |
|
|
|
HD 626 S1:1996/A1:1997 |
Note 3 |
Date expired (1.12.1997) |
|
|
HD 626 S1:1996/A2:2002 |
Note 3 |
Date expired (1.8.2003) |
|
|
Cenelec |
HD 627 S1:1996 Multicore and multipair cables for installation above and below ground |
|
|
|
HD 627 S1:1996/A1:2000 |
Note 3 |
Date expired (1.8.2001) |
|
|
HD 627 S1:1996/A2:2005 |
Note 3 |
Date expired (1.6.2008) |
|
|
Cenelec |
HD 639 S1:2002 Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) IEC 61540:1997 (Modified) + A1:1998 (Modified) |
|
|
|
HD 639 S1:2002/A1:2003 |
Note 3 |
Date expired (1.6.2005) |
|
|
HD 639 S1:2002/A2:2010 |
Note 3 |
Date expired (1.9.2013) |
|
|
HD 639 S1:2002/AC:2003 |
|
|
|
|
Cenelec |
HD 60269-2:2010 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J IEC 60269-2:2010 (Modified) |
HD 60269-2:2007 Note 2.1 |
Date expired (1.9.2013) |
|
Cenelec |
HD 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K IEC 60269-2:2013 (Modified) |
HD 60269-2:2010 Note 2.1 |
15.8.2016 |
|
Cenelec |
HD 60269-3:2010 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F IEC 60269-3:2010 (Modified) |
HD 60269-3:2007 Note 2.1 |
Date expired (1.9.2013) |
|
HD 60269-3:2010/A1:2013 IEC 60269-3:2010/A1:2013 |
Note 3 |
5.3.2016 |
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
|
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
|
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
|
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
|
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2). |
|
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
|
— |
References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
|
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
|
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
|
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
|
— |
CEN: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25500811; fax +32 25500819 (http://www.cen.eu) |
|
— |
Cenelec: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25196871; fax +32 25196919 (http://www.cenelec.eu) |
|
— |
ETSI: 650 route des Lucioles 06921 Sophia Antipolis, FRANCE, Tel. +33 492944200; fax +33 493654716 (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.
NOTICES FROM MEMBER STATES
|
28.11.2013 |
EN |
Official Journal of the European Union |
C 348/158 |
Information communicated by Member States regarding State aid granted under Commission Regulation (EC) No 1857/2006 on the application of Articles 87 and 88 of the Treaty to State aid to small and medium-sized enterprises active in the production of agricultural products and amending Regulation (EC) No 70/2001
2013/C 348/04
Aid No: SA.37120 (13/XA)
Member State: Netherlands
Region: GROOT-AMSTERDAM, HET GOOI EN VECHTSTREEK
Title of aid scheme or name of company receiving an individual aid: Uitvoeringsregeling subsidie Businesscase Zeevang en Groene Uitweggebied Noord-Holland 2013
Legal basis: Algemene subsidieverordening Noord-Holland 2011
Annual expenditure planned under the scheme or overall amount of individual aid granted to the company: Annual overall amount of the budget planned under the scheme: EUR 2,48 (in millions)
Maximum aid intensity: 100 %
Duration of scheme or individual aid award: 9.11.2013 - 31.12.2014
Objective of aid: Conservation of traditional landscapes and buildings (Art. 5 of Reg. (EC) No 1857/2006), Investment in agricultural holdings (Art. 4 of Reg. (EC) No 1857/2006), Land reparcelling (Art. 13 of Reg. (EC) No 1857/2006), Relocation of farm buildings in the public interest (Art. 6 of Reg. (EC) No 1857/2006)
Sector(s) concerned: Crop and animal production, hunting and related service activities
Name and address of the granting authority:
|
gedeputeerde staten van de provincie Noord-Holland |
|
provincie Noord-Holland |
|
Postbus 3007 |
|
2001 DA Haarlem |
Website: http://www.noord-holland.nl/psstukken/openbaar/AVV/AVV-PB2013-86.pdf
Other information: —
Aid No: SA.37404 (13/XA)
Member State: Czech Republic
Region: Ústecký
Title of aid scheme or name of company receiving an individual aid: Program pro rozvoj eko-agro oblastí v Ústeckém kraji, oblast podpory rozvoje zemědělství a venkovských oblastí na období let 2014 až 2016
Legal basis:
|
1) |
Zákon č. 129/2000 Sb., o krajích, § 36 písm. c) a § 59 odst. 2 písm. a) |
|
2) |
Zásady poskytování finančních prostředků z rozpočtu Ústeckého kraje |
|
3) |
Program pro rozvoj eko-agro oblastí v Ústeckém kraji, oblast podpory rozvoje zemědělství a venkovských oblastí na období let 2014 až 2016 |
Annual expenditure planned under the scheme or overall amount of individual aid granted to the company: Annual overall amount of the budget planned under the scheme: CZK 6 (in millions)
Maximum aid intensity: 100 %
Duration of scheme or individual aid award: 1.12.2013 - 31.12.2016
Objective of aid: Investment in agricultural holdings (Art. 4 of Reg. (EC) No 1857/2006), Producer groups (Art. 9 of Reg. (EC) No 1857/2006), Technical support (Art. 15 of Reg. (EC) No 1857/2006)
Sector(s) concerned: Crop and animal production, hunting and related service activities
Name and address of the granting authority:
|
Ústecký kraj |
|
Krajský úřad Ústeckého kraje, odbor životního prostředí a zemědělství |
|
Velká Hradební 3118/4 |
|
400 02 Ústí nad Labem |
Website: http://www.kr-ustecky.cz/VismoOnline_ActionScripts/File.ashx?id_org=450018&id_dokumenty=1676249
Other information: —
Aid No: SA.37449 (13/XA)
Member State: Netherlands
Region: UTRECHT, NOORD-BRABANT, LIMBURG (NL)
Title of aid scheme or name of company receiving an individual aid: Herinvesteringsreserve voor verplaatsing landbouwbedrijven
Legal basis: Artikel 3.54 en artikel 3.64 Wet inkomstenbelasting 2001 juncto artikel 12a, onderdeel b, Uitvoeringsbesluit Inkomstenbelasting 2001
Annual expenditure planned under the scheme or overall amount of individual aid granted to the company: Annual overall amount of the budget planned under the scheme: EUR 70 000
Maximum aid intensity: 100 %
Duration of scheme or individual aid award: 6.11.2013 - 31.12.2015
Objective of aid: Relocation of farm buildings in the public interest (Art. 6 of Reg. (EC) No 1857/2006)
Sector(s) concerned: AGRICULTURE, FORESTRY AND FISHING
Name and address of the granting authority:
|
Ministerie van Financien |
|
Korte Voorhout 7 |
|
2500 EE Den Haag |
|
NL |
Website:
|
|
http://brabant.regelingenbank.eu/regeling/324-subsidieregeling-verplaatsing-grondgebonden-agrarische-bedrijven-noord-brabant/ |
|
|
https://www.provincie-utrecht.nl/loket/regelgeving-0/regeling/918/995/uitvoeringsverordening_subsidie/#backlink |
|
|
http://www.limburg.nl/dsresource?objectid=26891&type=org |
|
|
http://wetten.overheid.nl/BWBR0012066/geldigheidsdatum_03-05-2012#Hoofdstuk3_Artikel12a |
Other information: —
Aid No: SA.37467 (13/XA)
Member State: Italy
Region: ITALIA
Title of aid scheme or name of company receiving an individual aid: Avviso pubblico per la selezione di n. 6 imprenditrici agricole cui verrà conferito il premio De@Terra.
Legal basis: D.M. n. 0001890 del 25 settembre 2013
Annual expenditure planned under the scheme or overall amount of individual aid granted to the company: Overall amount of the ad hoc aid awarded to the undertaking: EUR 0,7 (in millions)
Maximum aid intensity: 100 %
Duration of scheme or individual aid award: 15.11.2013 - 31.12.2014
Objective of aid: Technical support (Art. 15 of Reg. (EC) No 1857/2006)
Sector(s) concerned: AGRICULTURE, FORESTRY AND FISHING
Name and address of the granting authority:
|
Ministero delle politiche agricole alimentari e forestali |
|
Via XX Settembre, 20 00187 ROMA |
Website:
|
|
http://www.reterurale.it/flex/cm/pages/ServeBLOB.php/L/IT/IDPagina/1 |
|
|
http://www.politicheagricole.it/flex/cm/pages/ServeBLOB.php/L/IT/IDPagina/6747 |
Other information: —
Aid No: SA.37552 (13/XA)
Member State: United Kingdom
Region: EAST MIDLANDS, WEST MIDLANDS, EASTERN, LONDON, SOUTH EAST, SOUTH WEST, NORTH EAST, NORTH WEST, YORKSHIRE AND THE HUMBER
Title of aid scheme or name of company receiving an individual aid: Environment Agency Water Framework Directive Programme Scheme: Habitats Improvement, Agricultural & Non-Agricultural Diffuse Pollution and Invasive Non-Native Species.
Legal basis: The Water Environment (Water Framework Directive) (England & Wales) Regulations 2003 and The Appropriation Act 2011.
Annual expenditure planned under the scheme or overall amount of individual aid granted to the company: Annual overall amount of the budget planned under the scheme: GBP 3,8725 (in millions)
Maximum aid intensity: 100 %
Duration of scheme or individual aid award: 6.11.2013 - 31.3.2020
Objective of aid: Conservation of traditional landscapes and buildings (Art. 5 of Reg. (EC) No 1857/2006), Investment in agricultural holdings (Art. 4 of Reg. (EC) No 1857/2006), Technical support (Art. 15 of Reg. (EC) No 1857/2006)
Sector(s) concerned: AGRICULTURE, FORESTRY AND FISHING
Name and address of the granting authority:
|
The Environment Agency |
|
Horizon House |
|
Deanery Road |
|
Bristol |
|
UK |
|
BS1 5AH |
Website: http://www.environment-agency.gov.uk/research/planning/131506.aspx
Other information: —
Aid No: SA.37596 (13/XA)
Member State: Netherlands
Region: OVERIJSSEL
Title of aid scheme or name of company receiving an individual aid: Paragraaf 8.14 MKB energielening AGRI
Legal basis: Uitvoeringsbesluit subsidies Overijssel 2011, paragraaf 8.14.
www.overijssel.nl, kies loket, kies subsidies, kies wet en regelgeving, kies uitvoeringsbesluit subsidies Overijssel 2011, kies paragraaf 8.14.
Annual expenditure planned under the scheme or overall amount of individual aid granted to the company: Annual overall amount of the budget planned under the scheme: EUR 2 (in millions)
Maximum aid intensity: 11,2 %
Duration of scheme or individual aid award: 11.11.2013 - 31.12.2015
Objective of aid: Investment in agricultural holdings (Art. 4 of Reg. (EC) No 1857/2006)
Sector(s) concerned: AGRICULTURE, FORESTRY AND FISHING
Name and address of the granting authority:
|
Provincie Overijssel |
|
Luttenbergstraat 2, 8012 EE Zwolle |
Website: http://www.overijssel.nl/loket/provinciale/uitvoeringsbesluit_subsidies_overijssel_2011
Other information: —
Aid No: SA.37602 (13/XA)
Member State: Lithuania
Region: Lithuania
Title of aid scheme or name of company receiving an individual aid: Prarastų pajamų dėl prevencijos priemonių taikymo ir sunkumų įsigyjant naujus gyvulius kompensavimas
Legal basis: Lietuvos Respublikos žemės ūkio ministro įsakymo „Dėl žemės ūkio ministro 2008 m. gruodžio 2 d. įsakymo Nr. 3D-646 „Dėl nuostolių, kuriuos patyrė gyvūnų savininkai vykdydami gyvūnų užkrečiamųjų ligų židinių likvidavimo ir šių ligų prevencijos priemones, kompensavimo tvarkos aprašo patvirtinimo“ pakeitimo“ projektas
Annual expenditure planned under the scheme or overall amount of individual aid granted to the company: Annual overall amount of the budget planned under the scheme: LTL 6,9056 (in millions)
Maximum aid intensity: 100 %
Duration of scheme or individual aid award: 11.11.2013 - 31.12.2014
Objective of aid: Animal diseases (Art. 10 of Reg. (EC) No 1857/2006)
Sector(s) concerned: Animal production
Name and address of the granting authority:
|
Lietuvos Respublikos žemės ūkio ministerija |
|
Gedimino pr. 19 (Lelevelio g. 6), LT-01103 Vilnius, Lietuvos Respublika |
Website:
|
|
http://www.lrs.lt/pls/proj/dokpaieska.showdoc_l?p_id=205689&p_fix=n&p_gov=n |
|
|
http://www.lrs.lt/pls/proj/dokpaieska.showdoc_l?p_id=205688&p_fix=n&p_gov=n |
Other information: —
Aid No: SA.37620 (13/XA)
Member State: Belgium
Region: VLAAMS GEWEST
Title of aid scheme or name of company receiving an individual aid: Terugbetaling van erkende adviesdiensten onder het sociaal begeleidingsplan voor de ontwikkeling van het havengebied Antwerpen.
Legal basis: AfbakeningsGRUP HAven van Antwerpen: Principiële krachtlijnen van het sociaal begeleidingsplan.
http://www.mow.vlaanderen.be/bemiddelaar/documenten/VR%202011%201507%20DOC.0831%20GRUP%20Haven%20van%20Antwerpen%20-%20sociaal%20begeleidingsplan.pdf
Annual expenditure planned under the scheme or overall amount of individual aid granted to the company: Annual overall amount of the budget planned under the scheme: EUR 1 (in millions)
Maximum aid intensity: 100 %
Duration of scheme or individual aid award: 12.11.2013 - 12.11.2020
Objective of aid: Technical support (Art. 15 of Reg. (EC) No 1857/2006)
Sector(s) concerned: Crop and animal production, hunting and related service activities
Name and address of the granting authority: NMBS-Vlaamse Overheid-Msp beleid van het Linkeroevergebied -Gemeentelijk Havenbedrijf A'pen
Frankrijkstraat 85 1000 Brussel
Koolstraat 35 1000 Brussel
Sint-Paulusplein 27 9120 Kallo
Entrepotkaai 1 2000 Antwerpen
Website: http://www.mow.vlaanderen.be/bemiddelaar/documenten/2013-03-15-brochure.pdf
Other information: —
Aid No: SA.37621 (13/XA)
Member State: Italy
Region: MOLISE
Title of aid scheme or name of company receiving an individual aid: Misure regionali di sostegno delle piccole e medie imprese (PMI) del settore agricolo colpite dalla fitopatia Plum Pox Virus — PPV (Sharka), agente causale della Vaiolatura delle drupacee).
Approvazione programma di intervento contributivo ed istituzione del relativo regime di aiuto ai sensi dell'art.10 del Reg (CE) n. 1857/2006.
Legal basis: deliberazione della Giunta Regionale del 21 ottobre 2013 n.550.
Annual expenditure planned under the scheme or overall amount of individual aid granted to the company: Annual overall amount of the budget planned under the scheme: EUR 0,04 (in millions)
Maximum aid intensity: 7,5 %
Duration of scheme or individual aid award: 9.11.2013 - 31.12.2013
Objective of aid: Plant diseases — pest infestations (Art. 10 of Reg. (EC) No 1857/2006)
Sector(s) concerned: AGRICULTURE, FORESTRY AND FISHING
Name and address of the granting authority:
|
REGIONE MOLISE |
|
ASSESSORATO AGRICOLTURA — SERVIZIO FITOSANITARIO REGIONALE — VIA NAZARIO SAURO N.1 — 86100 CAMPOBASSO |
Website: http://www.regione.molise.it
Other information: —
V Announcements
PROCEDURES RELATING TO THE IMPLEMENTATION OF COMPETITION POLICY
European Commission
|
28.11.2013 |
EN |
Official Journal of the European Union |
C 348/162 |
STATE AID — UNITED KINGDOM
State aid SA.34775 (2013/C) (ex 2012/NN) — Aggregates Levy
Invitation to submit comments pursuant to Article 108(2) of the Treaty on the Functioning of the European Union
(Text with EEA relevance)
2013/C 348/05
By means of the letter dated 31.07.2013 reproduced in the authentic language on the pages following this summary, the Commission notified the United Kingdom of its decision to initiate the procedure laid down in Article 108(2) of the Treaty on the Functioning of the European Union concerning the levy on aggregates introduced in the Finance Act 2001, Part 2, Sections 16 to 49.
Interested parties may submit their comments on the measure in respect of which the Commission is initiating the procedure within one month of the date of publication of this summary and the following letter, to:
|
European Commission |
|
Directorate-General for Competition |
|
Directorate for State Aid |
|
State Aid Greffe |
|
1049 Bruxelles/Brussel |
|
BELGIQUE/BELGIË |
|
Fax No: (0032) 2-296.12.42 |
These comments will be communicated to the United Kingdom. Confidential treatment of the identity of the interested party submitting the comments may be requested in writing, stating the reasons for the request.
SUMMARY
1. PROCEDURE
By letter dated 20 December 2001, the United Kingdom notified to the Commission an aid scheme with the title "phased introduction of the aggregates levy in Northern Ireland". In their notification, the United Kingdom authorities informed the Commission that they intended to introduce a levy on aggregates with effect from 1 April 2002 (the "AGL"). This levy was to be introduced in the Finance Act 2001, Part 2.
In 2001 complaints were filed (including by the British Aggregates Association) with the Commission, essentially taking the view that the exclusion of certain materials from the scope of the AGL and the exemption for certain processes constituted State aid to certain undertakings.
After the submission of additional information on 21 February 2002, the Commission adopted, 24 April 2002, a no objections decision with respect to the AGL (1). It considered that the different exemptions provided for in the Finance Act 2001 were justified by the logic of the tax and that the Finance Act 2001 did not entail any State aid. The Commission further considered that the stage introduction of the AGL in Northern Ireland constituted aid that was compatible with the internal market.
On 7 March 2012 the General Court annulled the above mentioned Commission decision. It found that the Commission failed to demonstrate that the tax differentiation associated with the exemption is justified on the basis of the normal taxation principle underpinning the AGL or on the basis of the environmental objective of the AGL.
Following the annulment of the Commission decision, the Commission must now re-assess whether the exemptions, exclusions and tax reliefs provided for in the 2001 Finance Act constitute State aid. The issue of the compatibility of the staged introduction of the AGL in Northern Ireland is part of another procedure (SA.18859 (2011/C) – UK – Relief from Aggregates Levy in Northern Ireland).
2. DESCRIPTION OF THE MEASURE IN RESPECT OF WHICH THE COMMISSION IS INITIATING THE PROCEDURE
Aggregates are used in the construction sector. They can generally be described as corresponding to granular or particulate material which because of its physical and chemically inert properties is suitable for use on its own or with the addition of cement, lime or bitumous material in construction as concrete, roadstone, asphalt or drainage courses, or for use as construction fill. Aggregate may be natural (rock, sand and gravel), manufactured or recycled.
The AGL was introduced by the United Kingdom with effect from 1 April 2002 for environmental purposes, primarily to maximise the use of recycled aggregate and other alternatives to freshly extracted aggregate and to promote the efficient extraction and use of aggregates so as to reduce the impact of aggregate extraction on the environment (damage to biodiversity and amenity in particular); it is applied to rock, sand or gravel on its first extraction and to processed products. It covers aggregate extracted in the United Kingdom and imported aggregate on its first use or sale in the United Kingdom. It does not apply to exported aggregates. Also, the AGL does not apply to certain rocks, sand and gravel when they are either obtained through certain specific processes, when they have certain geological characteristics or when they have already been subject to the tax.
3. ASSESSMENT OF THE MEASURE
3.1. Existence of aid within the meaning of Article 107 (1) of the TFEU
The Commission has examined whether the AGL, and in particular the exemptions, exclusions and tax reliefs therefrom constitutes State aid within the meaning of Article 107(1) TFEU. By virtue of that article a measure constitutes State aid under Article 107(1) TFEU if it fulfils four conditions. Firstly, the measure confers an advantage to the beneficiaries. Secondly, the measure favours certain undertakings or economic activities (selectivity). Thirdly, the measure is funded by the State or through State resources. And fourthly, the measure has the potential to affect the trade between Member States and to distort competition in the internal market.
While there is no doubt that the measure is financed from State resources and has the potential to affect the trade between Member States and to distort competition in the internal market, the question whether the measure confers a selective advantage to the beneficiaries requires a detailed examination. It will depend on whether the exemptions, exclusions and tax reliefs are justified by the nature and logic of the AGL.
Based on the information submitted by the United Kingdom in 2001-2002, on the information submitted by the complainant, including information submitted during the procedure before the Court, based also on the findings of the General Court and additional explanations received from the United Kingdom after the annulment of the decision, the Commission comes to the conclusion that the normal taxation principle consists in the taxation of rock, gravel and sand that are extracted for their use as aggregates and which are subject to commercial exploitation in the United Kingdom after 1 April 2002. The AGL is designed so as to ensure that the environmental impacts of aggregates extraction are more fully reflected in prices so as to induce a more efficient extraction and use of aggregates. It also aims at encouraging a shift in demand away from aggregates that were extracted for their exploitation as aggregates towards alternative aggregates such as recycled aggregates and aggregates which are the by-products of or waste from certain extraction or industrial processes.
On this basis, the Commission has come to the preliminary conclusion that the exemptions, exclusions and tax reliefs provided for by Sections 18(2)(a), 18(2)(c), 17(2)(c), 17(2)(d), 17(2)(b), 17(3) (b), (c), (d) and (da), 17(4)(d) and (e), 17(4)(c) (when it consists wholly of the spoil), 17(4)(f) (except for clay), 30(1)(a), 30(1)(c) of Finance Act 2001, as amended by Finance Act 2002 and Finance Act 2007, results from the logic and nature of the AGL and consequently do not provide a selective advantage to producers of the concerned exempted materials and do not constitute State aid within the meaning of Article 107(1) TFEU.
On the basis of the information that was so far submitted to it, the Commission cannot conclude without doubts that the exemptions, exclusions and tax reliefs provided for under sections 18(2)(b) and 30(1)(b), 17(4)(a), 17(3)(e), 17(3)(f)(i) and (ii), 17(4)(c) (i) and (ii) (when it consists mainly of the spoil), 17(4)(f) (as far as clay is concerned) of the Finance Act 2001, as amended by Finance Act 2002 and Finance Act 2007, are justified by the logic and nature of the AGL. Therefore, at this juncture the Commission cannot exclude that those exclusions and exemptions confer a selective advantage to the producers of the exempted aggregates concerned, in that it relieves them from a charge that they should normally pay.
3.2. Legality of the aid
Although the AGL was notified by the United Kingdom before being put into effect, the recipients of the aid cannot entertain any legitimate expectations as to the lawfulness of the implementation of the aid, since the Commission's decision was challenged in due time before the General Court (2). As the Commission's decision was annulled by the General Court, that decision must be considered void with regard to all persons as from the date of its adoption. Since the annulment of the Commission's decision put a stop, retroactively, to the application of the presumption of lawfulness, the implementation of the aid in question must be regarded as unlawful (3). In addition, the Commission note that in any event the AGL entered into force (1 April 2002) before the Commission adopted its no objection decision of 24 April 2002.
3.3. Compatibility
Given the environmental purpose of the AGL, the Commission has examined its compatibility according to Article 107(3)(c) TFEU and in the light of Guidelines on State aid for environmental protection.
As the exemptions constitute exemptions from an environmental tax, they could potentially be examined in the light of paragraphs 47-48 of the 2001 Environmental Aid Guidelines for aid granted between 01.04.2002 and 31.03.2008 and paragraphs 158-159 of the 2008 Environmental Aid Guidelines for aid granted as of 01.04.2008. As, however, the Commission does not dispose of the information that is necessary to assess the compatibility of the exemptions with those provisions and as no further elements have been brought forward to justify the exemptions, the Commission has at this stage doubts as to their compatibility with the internal market. In accordance with Article 4(4) of Regulation (EC) No 659/1999 the Commission has thus decided to open the formal investigation procedure in respect of sections 17(3)(e), 17(3)(f)(i) and (ii), 17(4)(a), 17(4)(c)(i) and (ii) (when it consists mainly of the spoil), 17(4)(f) (as far as clay is concerned), 18(2)(b) and 30(1)(b), of the Finance Act 2001, as amended by Finance Act 2002 and Finance Act 2007, thereby inviting the United Kingdom to submit its comments as well as additional information.
In accordance with Article 14 of Council Regulation (EC) No 659/1999, all unlawful aid can be subject to recovery from the recipient.
TEXT OF LETTER
‘The Commission wishes to inform the United Kingdom that it has re-examined the notification supplied by your authorities on the measure referred to above after the Judgment of the General Court of the European Union of 7 March 2012 in case T-210/02 RENV (British Aggregates Association v Commission). The reasoning followed by the General Court in its judgment of 7 March 2012 shows that there are objective reasons for the Commission to have doubts as to whether certain tax exemptions are in line with the logic and nature of the aggregates levy. The reasoning followed by the General Court also shows that those doubts exist for certain exemptions but not for all of them and do not put into question the aggregates levy in its entirety.
On this basis and after re-examination of the notification, the Commission has decided to:
|
— |
raise no objections to the tax exemptions, tax exclusions and tax reliefs established in Sections 17(2)(b), 17(2)(c), 17(2)(d), 17(3)(b), 17(3)(c), 17(3)(d) and 17(3)(da), 17(4)(d)) and 17(4)(e), Section 17(4)(a) (in so far as the exempted material consist wholly of coal, lignite, shale, slate that is used for other purposes than as aggregate), Section 17(4)(c) (when it consists wholly of the spoil), Section 17(4)(f) (except for clay), Section 18(2)(a), Section 18(2)(b) (in so far as it relates to materials that are not used as aggregates), Section 18(2)(c), Section 30(1)(a), Section 30(1)(b) (in so far as it relates to exempt processes within the meaning of Section 18(2) (a) and (c)), Section 30(1)(b) (in so far as it relates to an exempt process within the meaning of Section 18(2) (b) that provides for materials that are not used as aggregates) and Section 30(1)(c) of the Finance Act 2001, as amended by Finance Act 2002 and Finance Act 2007, on the ground that they do not constitute State aid within the meaning of Article 107 (1) of the Treaty on the Functioning of the European Union; |
|
— |
initiate the procedure laid down in Article 108(2) of the Treaty in respect of the tax exemptions, tax exclusions and tax reliefs established in Sections 17(3)(e), 17(3)(f)(i) and (ii), Section 17(4)(a) (in so far as the exempted material consist wholly of coal, lignite, shale, slate that is used as aggregate or consist mainly of coal, lignite, shale and slate), Section 17(4)(c)(i) and (ii) (when it consists mainly of the spoil), 17(4)(f) (as far as clay is concerned), 18(2)(b) (in so far as it relates to an exempt process that provides for materials that are used as aggregates) and 30(1)(b) (in so far as it relates to an exempt process within the meaning of Section 18(2)(b) that provides for materials that are used as aggregates) of the Finance Act 2001, as amended by Finance Act 2002 and Finance Act 2007. |
1. PROCEDURE
|
(1) |
By letter dated 20 December 2001 (registered on 28 December 2001), the United Kingdom authorities ("UK authorities") notified to the Commission an aid scheme with the title "phased introduction of the aggregates levy in Northern Ireland". In their notification, the UK authorities informed the Commission that they intended to introduce a levy on aggregates with effect from 1 April 2002. This levy was to be introduced by the Finance Act 2001, Part 2, Sections 16 to 49 and schedules 4 to 10. The aid scheme itself (phased introduction of the aggregates levy in Northern Ireland) was described as consisting of the introduction of the levy in several stages in Northern Ireland so as to preserve the international competitiveness of companies in Northern Ireland that manufacture processed products such as concrete and asphalt from aggregates. This staged introduction of the levy for Northern Ireland was to be introduced by the Finance Act 2002. |
|
(2) |
In addition to the notification, the Commission received on 27 September 2001 a complaint from two companies engaged in the extraction and processing of aggregates and, on 15 April 2002, an additional complaint, submitted by the British Aggregates Association. The complainants considered that the Finance Act 2001 entailed State aid for the products and processes exempted from the aggregates levy (the "AGL") and considered that the derogations relating to Northern Ireland were aid incompatible with the internal market. |
|
(3) |
After the submission of additional information on 21 February 2002, the Commission adopted, on 24 April 2002, a no objections decision with respect to the AGL (4). It considered that the different exemptions foreseen in the Finance Act 2001 were justified by the logic of the tax and that the Finance Act 2001 did not entail any State aid. The Commission further considered that the staged introduction of the AGL in Northern Ireland constituted aid that was compatible with the internal market. |
|
(4) |
On 12 July 2002, the British Aggregates Association brought an action for annulment of the above mentioned Commission decision, registered as Case T-210/02. On 13 September 2006, the General Court dismissed the action in its entirety. On 27 November 2006, the British Aggregates Association appealed the judgment of the General Court. By judgment of 22 December 2008 in Case C-487/06 P, the Court of Justice set aside the appealed judgment and referred the case back to the General Court. |
|
(5) |
On 7 March 2012, in its judgment in Case T-210/02 RENV, the General Court annulled the Commission decision mentioned in recital 3 above.. The General Court found that the Commission failed to demonstrate that the tax differentiation associated with the exemption is justified on the basis of the normal taxation principle underpinning the AGL or on the basis of the environmental objective of the AGL. The General Court found in particular that the Commission had failed to take account of the normal taxation principle in determining the selective nature of any advantage generated by the AGL. In this connection, the General Court pointed to the inconsistencies in terminology used by the Commission in its decision, namely as regards the terms "virgin", "primary" and "secondary" aggregates, which did not correspond to the terms used in the Finance Act 2001 as amended. Also, the Commission had failed to explain in its decision why certain exempt materials (used as aggregates, like clay aggregates) were not in the same legal and factual situation as taxed material. |
|
(6) |
Following the annulment of the Commission decision finding that the Finance Act 2001 did not entail State aid, the Commission registered the file under a NN reference, since the AGL has been in force since 1 April 2002. The Commission must now re-assess whether the exemptions, exclusions and tax reliefs foreseen in the 2001 Finance Act, as amended by the Finance Act 2002 and Finance Act 2007, constitute State aid. The issue of the compatibility of the staged introduction of the AGL in Northern Ireland is being examined in the context of another procedure (see SA.18859 (2011/C) – United Kingdom – Relief from Aggregates Levy in Northern Ireland). |
|
(7) |
In addition to the observations and submissions made during the Court proceedings, the complainant transmitted further comments and information to the Commission on 13 June 2012 and 26 October 2012. Those comments were transmitted to the UK on 15 May 2013. On 27 September 2012 and 27 May 2013, the UK authorities provided further information on the AGL. |
2. DETAILED DESCRIPTION OF THE MEASURE
2.1. Notion of aggregates
|
(8) |
Aggregates are used in the construction sector. They can generally (5) be described as corresponding to granular or particulate material which because of its physical and chemically inert properties is suitable for use on its own or with the addition of cement, lime or bitumous material in construction as concrete (6), roadstone, asphalt or drainage courses (7), or for use as construction fill (8). Aggregate may be natural, manufactured or recycled (9). |
|
(9) |
Natural aggregates are aggregates that occur naturally and that can be used without industrial processing. These are sand, gravel and crushed rock (10) and are extracted from quarries and gravel pits or from sea dredging. |
|
(10) |
Recycled aggregates derive from reprocessing materials previously used in construction, including construction and demolition residues (11). |
|
(11) |
Manufactured aggregates are generally lightweight and high density aggregates manufactured for specialist purposes. They are produced after application of an industrial process (usually a thermal process). Examples are: blastfurnace slag aggregate, expanded clay aggregate, expanded perlite aggregate, expanded polystyrene bead aggregate (12). |
|
(12) |
Other terms commonly used in the industry are virgin aggregates, primary and secondary aggregates. The meaning of those terms is not uniform. Virgin aggregates usually designate aggregates freshly extracted that have not been previously used by opposition to recycled aggregates. Natural aggregates are also often referred to as primary aggregates (13). This concept is often used by opposition to the concept of secondary aggregates used to designate aggregates derived from a range of industrial and mineral wastes such as power station ash, blast furnace slag, glass, china clay waste, slate waste and colliery spoil (14). However, primary versus secondary aggregates are also sometimes used to designate the different grades/qualities of aggregates extracted in a quarry. In that sense, primary aggregates correspond to the premium quality aggregate while secondary aggregates correspond to lower quality grades and low-specification material (15). In addition, mineral waste (china clay waste, slate waste, colliery spoil (16)) is sometimes also included in the category of natural aggregates while aggregates derived from industrial processes are then placed in the category of manufactured aggregates (17). |
|
(13) |
Materials that are suitable for use as aggregates can also be used to manufacture other products. In that sense, the industry distinguishes between aggregate uses of sand, gravel and crushed rock materials and non-aggregate uses (18) of sand, gravel and crushed rock materials. Non-aggregate uses of rock, sand and gravel are, for instance, the production of cement, glass, and other industrial (19) or agricultural uses (20). |
2.2. Background to the AGL and objective
|
(14) |
Aggregate is a constrained natural resource, in terms of the areas in the country where it can be acceptably extracted (21). The quarrying of aggregate takes up land in the medium- to long-term and causes environmental damage and pollution. |
|
(15) |
Towards the end of the 1990's, the UK authorities undertook several actions aimed at tackling a series of environmental concerns (energy efficiency, climate change, improving air quality, integrated transport strategy, sustainable waste management, limitation of the impact of land use and water pollution). |
|
(16) |
In July 1997, they announced that research would be carried out to assess the environmental costs attached to the extraction of aggregates and to what extent these are not captured in the price, or covered by regulations (22). |
|
(17) |
In April 1998, initial research suggested that there are significant environmental costs associated with aggregates extraction and transportation which were not covered by regulation (transport, noise, dust, blasting, impact on water, visual intrusion, impact upon wildlife, amenity) (23). In mid-1998, a public consultation was held on the practicalities of an aggregates tax while, in parallel, further research into the external costs and benefits of aggregates extraction was conducted. In March 1999, this research confirmed that there are significant environmental costs linked to the extraction of aggregates that were neither covered by regulation nor integrated in the price of aggregates. Such costs included noise, vibration, dust, visual intrusion, loss of amenity and damage to biodiversity. The results of the studies established a case, in principle, for a tax on the extraction of aggregates (24) and draft legislation for a tax on hard rock, sand and gravel used as aggregate was published. |
|
(18) |
Before making a final decision on the introduction of a tax, the UK authorities attempted to pursue, with the industry, an enhanced package of environmental improvements (25). In March 2000, however, they announced that the industry had failed to come forward with an acceptable improved package and that the AGL would be introduced in April 2002 (26). |
|
(19) |
The AGL was introduced with the aim of encouraging the more efficient use of aggregates in the construction industry by:
|
|
(20) |
In this connection, the UK authorities have explained that aggregates are a relatively low value product, especially compared with the total costs of building projects for which aggregates are an input. Aggregates can be extracted from the ground relatively easily. Therefore without additional price signals, such as the one given by the AGL, there is no particular incentive to use aggregates efficiently. |
|
(21) |
Also, without additional price signals, recycling of aggregates would not be economically viable. The UK authorities consider that incentivising the use of recycled aggregates, while not without its own environmental costs such as use of energy and creation of noise, is an important aspect of reducing the environmental costs associated with the extraction of materials from the ground (such as long-term biodiversity impacts). Indeed, the use of recycled materials does not require the disturbance of new land or the sea-bed. |
|
(22) |
Further to encouraging the use of recycled aggregates as an alternative to newly-quarried material, the AGL’s structure also seeks to reduce the extraction of sand, gravel and rock specifically for use as aggregates, by incentivising the use of other materials that would otherwise be discarded. By-products, spoil and waste of other extraction processes or of industrial processes are usually considered to be of lower quality and specification than materials specifically extracted and exploited for use as aggregates. They may have slightly different uses and applications. For example, due to their lower density or uneven size they may not be safe to use in the construction of certain road surfaces or in other situations where the aggregates need to withstand high pressure and wear and tear. However, by-products, waste and spoil can still present a viable alternative to the highest quality aggregates in many situations. The by-products, waste and spoil from processes specified in the Finance Act 2001 would be discarded without the existence of the AGL. As they are however a necessary by-product of a number of processes which deliver important materials for the construction industry (such as roof tiles from slate) or other industries (such as feldspar for the glass making industry), the UK authorities find it environmentally more efficient to find a use as aggregates for these materials, instead of depositing them as waste. This avoids additional environmental costs by using already quarried product that would otherwise be left as waste, as opposed to the (additional) extraction of virgin aggregates with unnecessary additional environmental costs (disturbance of new land). In addition, this assists in the rehabilitation of land already defaced by large waste and spoil tips. The UK authorities have added that the application of the AGL to such materials could have the undesired effect of discouraging what little use of those materials already exists, thus increasing rather than reducing tipping. |
|
(23) |
The UK authorities have provided estimates about the available amount of alternatives in 2001: slate waste (370 Mt in 2001 + additional 6Mt annually, of which 275 000 t are used as aggregates), china clay waste (450 Mt + additional 20-24 Mt annually, of which 1.5 Mt used as aggregates), colliery spoil (tips: 10 - 20 Mt + annually 8.8 Mt annually, of which around 2.2 are used as aggregates), power station ash (tips: 10-20 Mt + annually 8,8 Mt of which around 2.2 Mt are already used as aggregates), blast furnace slag (around 3.65 Mt in England and Wales, 2-/3 of it is used as aggregates), basic oxygen furnace steel slag (2.5 Mt annually in England and Wales, all used, mainly as roadstone), electric arc furnace steel slag (0.2 Mt in England and Wales, all of it is used as aggregates), municipal incinerator ash (of which approx. 0.08 Mt used in road surfacing and concrete production), waste glass (minimal amount used as aggregates at present), tyre rubber crumb (of which approx. 0.05 Mt are used annually as aggregates). |
|
(24) |
Initial projections suggested that the AGL would reduce demand for virgin aggregates by an average of 20 Mt/annum. |
|
(25) |
The UK authorities have indicated that given the aim of inducing a more efficient extraction and a more efficient use of virgin aggregates, "the levy falls on those who undertake quarrying for the purposes of commercially exploiting aggregate" (28). In this connection, the UK authorities have explained that while quarrying of high-specification materials to be used as aggregates also produces materials of lesser quality and hence price, it is not in practice possible to relieve these materials in a similar manner as by-products of industrial processes or other extraction activities. First the proportion of high quality and low quality aggregates will vary from quarry to quarry because of geological factors but is not an immutable figure for any given quarry as more efficient practices can help reducing the proportion of low quality aggregates. In addition, the term low quality aggregate is, to some extent, a subjective term. What one quarry operator would consider as low quality could be part of another's primary product range. Exempting low quality aggregates could thus lead to unequal treatment of operators and lead to tax avoidance or evasion. Extensive public consultation with the industry on this issue around the time of the introduction of the AGL did not yield a workable definition of how to distinguish between high quality materials which should be taxed and lower quality by-products of the process of extracting high value aggregates. The UK authorities further note that taxing low quality aggregates also reflects the desire to address the environmental costs of aggregate extraction, regardless of whether the extracted product is ultimately deemed to be of high or low quality. |
|
(26) |
Finally, the UK authorities note that the AGL is not conceived as a general tax on mineral extraction but as a tax on the extraction of rock, sand and gravel used as aggregates and subject to commercial exploitation in the UK. The UK authorities have explained that while the extraction of other materials may have similar environmental impacts, not all have suitable options for lessening the intensity of extraction through the use of alternative materials such as recycled materials and spoil. In addition, aggregates’ extraction was the largest UK mineral extraction activity (in 2002, it accounted for around 70%, by tonnage, of all mineral extraction) and therefore constituted the main source of environmental damage arising from mineral extraction across the UK as a whole. The scope of the tax was defined in order to achieve the greatest environmental benefit in the form of a reduction in the extraction of aggregates and in terms of the preservation of strategic resources, while at the same time not imposing a dead-weight tax burden on materials for which an alternative does not exist. |
2.3. Finance Act 2001, entry into force, amendments and duration
|
(27) |
The primary legislation governing the AGL is set out in the Finance Act 2001, Sections 16 to 49 and Schedules 4 to 10. The Finance Act 2001 was adopted on 11 May 2001. The AGL came into effect on 1 April 2002 and is still applicable. The law does not limit the application in time of the AGL. |
|
(28) |
The original provisions were amended by the Finance Act 2002. The amendments lay down exemptions for spoils resulting from the extraction of certain minerals, including slate, shale, ball clay and china clay. In addition, the Finance Act 2002 provides for a phased introduction of the AGL in Northern Ireland. The amendments are deemed to have come into force on 1 April 2002. |
|
(29) |
The scope of the AGL was further modified by the Finance Act 2007, Section 22 (laying down an exemption for aggregates removed from railways). It entered into force on 1 July 2007. Any reference to the Finance Act 2001 in this decision will refer to the Finance Act 2001 as amended by the Finance Act 2002 and by the Finance Act 2007. |
2.4. Structure of the AGL and events triggering the tax
|
(30) |
Section 16(1) of the Finance Act 2001 states that "a levy, to be known as aggregates levy, shall be charged in accordance with this Part on aggregate subjected to commercial exploitation". |
|
(31) |
According to Section 17(1) “aggregate” "means (subject to section 18 below) any rock, gravel or sand, together with whatever substances are for the time being incorporated in the rock, gravel or sand or naturally occur mixed with it". Section 18(1) provides that: "In this Part references to aggregate: (a) include references to the spoil, waste, off-cuts and other by-products resulting from the application of any exempt process to any aggregate (b) but do not include references to anything else resulting from the application of any such process to any aggregate". |
|
(32) |
According to Section 18(2) exempt processes are:
|
|
(33) |
Section 18(3) lists the relevant substances as being (a) anhydrite; (b) ball clay; (c) barytes; (e) china clay; (f) feldspar; (g) fireclay; (i) fluorspar; (j) fuller's earth; (k) gems and semi-precious stones; (l) gypsum; (m) any metal or the ore of any metal; (n) muscovite; (o) perlite; (p) potash; (q) pumice; (r) rock phosphates; (s) sodium chloride; (t) talc; (u) vermiculite. Subsections (3)(d) and (h) of section 18 were omitted retroactively as of 1 April 2002 by changes introduced by the Finance Act 2002. |
|
(34) |
Section 16(2) of the Finance Act 2001 read in conjunction with Section 19(1) and Section 19(2) determines that the AGL is triggered by any of the following four types of commercial exploitation within the UK that would occur first:
|
|
(35) |
For the purpose of the AGL, the Finance Act 2001 distinguishes essentially between three types of originating sites:
|
|
(36) |
As a result of the concept of commercial exploitation, the AGL applies to both aggregates extracted in the UK and imported aggregates. Imported aggregates will be subjected to the AGL not when they are landed in the UK (32) but when they are the subject matter of an agreement (and the aggregate is already located in the UK) or are used for constructions purposes (in the UK) or are mixed (in the UK) with any material or substance other than water, unless in permitted circumstances (33). |
|
(37) |
Section 19 (3) of Finance Act 2001 contains further details on the concept of commercial exploitation. It provides in letter (d) that there is no commercial exploitation taking place when - without its being subjected to any process involving its being mixed with any other substance or material (apart from water) - it again becomes part of the land at the site from which it was won (34). |
|
(38) |
Section 21 and 22 define who is the operator of a site and whether it is the operator of a site or some other person who is responsible for exploitation (and therefore liable to account for the AGL) in a given situation. |
2.5. Notion of taxable aggregate – exemptions from the AGL and tax credits
|
(39) |
Section 17(2) of the Finance Act 2001 provides that an aggregate is not a taxable aggregate in four cases:
|
|
(40) |
An aggregate is regarded as being used for construction purposes when it is used as a material or support in the construction or improvement of any structure (including roads, paths, the way on which any railway is or is to be laid, embankments, buildings and bridges) or when it is mixed with anything as part of the process of producing mortar, concrete, tarmacadam, coated road stone or any similar construction material (35). |
|
(41) |
Section 17(3) specifies that the following aggregate is exempt from the AGL if:
|
|
(42) |
Subsection (3)(da) of section 17 was inserted by Section 22(3) of the Finance Act 2007, operative from 1 August 2007. |
|
(43) |
In addition, subsection (4) of section 17 exempts aggregates consisting wholly or mainly of any one or more of the following, or is part of anything so consisting, namely:
|
|
(44) |
According to the Notice AGL 1, "wholly" means that 100 % of the material in question is one of the exempt materials. "Mainly" means that more than 50 % of the material is one of the exempt materials. Artificially mixing aggregate with a larger amount of exempt material will not produce an exempt mixture but will mean that the AGL is due on the aggregate at the time of mixing. |
|
(45) |
Section 30 (1) of the Finance Act 2001 provides for regulations to be made establishing a person’s right to a credit of tax if:
|
|
(46) |
Section 30 (1) (b) of the Finance Act 2001 provides for a tax relief in the case an exempt process within the meaning of Section 18 (2) (a), (b) and (c) of the Financial Act 2001 has been applied to the material when the material has already been subject to the AGL. It thus mirrors the exemptions provided for in Section 18 (2). |
|
(47) |
The industrial and agricultural processes that can benefit from a tax relief under Section 30 (1) (c) are listed in the Schedule "Industrial and Agricultural Processes" to regulation 13 of the Aggregates Levy (General) Regulations 2002. Notice AGL 2 (37) describes in more detail the type of processes that are concerned. They are the following:
|
2.6. Rate
|
(48) |
Originally, the AGL was levied at the rate of £1.60 per tonne. The rate was increased to £1.95 per tonne for aggregates subject to commercial exploitation on or after 1 April 2008. The rate currently applied is £2 per tonne (since 1 April 2009). |
3. ASSESSMENT OF THE MEASURE
3.1. Existence of aid within the meaning of Article 107 (1) of the TFEU
|
(49) |
A measure constitutes State aid within the meaning of Article 107(1) TFEU if it fulfils four conditions. First, the measure confers an advantage to the beneficiaries. Second, the measure favours certain undertakings or economic activities (selectivity). Third, the measure is funded by the State or through State resources. And fourth, the measure has the potential to affect the trade between Member States and to distort competition in the internal market. |
|
(50) |
According to settled case-law, the definition of aid is more general than that of a subsidy because it includes not only positive benefits, such as subsidies themselves, but also State measures which, in various forms, mitigate the charges which are normally included in the budget of an undertaking and which thus, without being subsidies in the strict sense of the word, are similar in character and have the same effect (38). |
|
(51) |
As regards the criterion of the selectivity of the advantage, it is necessary to consider whether, under a particular statutory scheme or specific tax system, a State measure is such as to favour certain undertakings or the production of certain goods within the meaning of Article 107(1) TFEU in comparison with other undertakings in a comparable legal and factual situation in the light of the objective pursued by the scheme or tax system concerned (39). |
|
(52) |
However, a measure which, although conferring an advantage on its recipient, is justified by the nature or general scheme of the tax system of which it is part does not satisfy that condition of selectivity (40). A Member State can thus show that a measure results directly from the basic or guiding principles of its tax system. |
|
(53) |
For the purpose of assessing the selective nature of the advantage conferred by the measure in question, it is important to determine what constitutes the reference framework, since the existence of an advantage may be established only when compared with this reference framework (41). |
|
(54) |
As the General Court has confirmed (42), the reference framework on the basis of which normal taxation and the existence of any selective advantages are to be determined consists of the AGL itself since it established a specific tax system applicable to the aggregates sector in the UK. It is thus by reference to the nature and general scheme of the AGL that it is necessary to examine whether tax differentiations are justified. |
|
(55) |
The Commission has examined the Finance Act 2001 as amended retroactively by Finance Act 2002. As the AGL is an on-going scheme, the Commission has also examined the exemption laid down in Section 17(3) (da), which was introduced by the Finance Act 2007. |
3.1.1. Normal taxation under the AGL and logic of the AGL
|
(56) |
As can be drawn from its name, the AGL is a levy on aggregates. Sections 16 (1) and (2) of the Finance Act 2001 establish a levy on aggregates that are subjected to commercial exploitation in the UK on or after its commencement date. |
|
(57) |
The commencement date is 1 April 2002. What constitutes commercial exploitation is defined in Section 19. As indicated in recital 34.above, four types of commercial exploitation are envisaged: a) the removal from its originating site; b) the conclusion of an agreement to supply; c) the use for construction purposes; or d) the mixing with any material or substance other than water. |
|
(58) |
As to the concept of aggregates, the UK authorities have confirmed that the AGL is not conceived as a levy on all extracted minerals or even on all rock, gravel or sand, but only on rock, gravel and sand extracted for the purpose of providing bulk in construction. |
|
(59) |
This is further confirmed by the preparatory works of the AGL (43). They confirm that from the outset, the AGL was designed to be a tax on aggregates and not on any extracted mineral. This has also been recognised by the General Court (44). |
|
(60) |
As indicated in recital 8 above, aggregates can generally be described as corresponding to granular or particulate materials which because of their physical and chemically inert properties are suitable for use on their own or with the addition of cement, lime or bitumous material in construction as concrete, roadstone, asphalt or drainage courses, or for use as construction fill. Natural aggregates are sand, rock and gravel. However, as indicated in recital 13 above, materials that are used as aggregates can also serve other purposes. In other terms, whether a material has to be considered as an aggregate or not will depend on its use rather than its geological composition. |
|
(61) |
In the course of drafting the AGL legislation, the UK authorities realized that a use-based definition of the scope of the tax would prove problematic, as the intended use for the product could change after the tax point had passed (45). In order to solve that difficulty, the UK authorities opted for another technique. Instead of using a precise definition of the term aggregate or general taxation criteria, the Finance Act 2001 starts by subjecting sand, gravel or rock to the tax but then narrows down the application and scope of the tax through exclusions, exemptions and tax reliefs of rock, sand or gravel that have been used for certain purposes or have been subjected to certain processes. |
|
(62) |
The objective assigned to the AGL is to ensure that the environmental impact of aggregates extraction (in particular damage to biodiversity and to visual amenity) is more fully reflected in prices so as to induce a more efficient extraction and use of aggregates. It also aims at encouraging a shift in demand away from virgin/primary aggregates towards alternative aggregates such as recycled aggregates and aggregates which are the by-products of or waste from certain extraction or industrial processes. The shift in demand on its turn will reduce the need for virgin/primary aggregates and will thus limit the damage to the environment associated with the extraction activity. |
|
(63) |
The Commission notes that throughout consultation documents, preparatory works and other documents that accompanied the adoption of the AGL, the terminology used is not consistent. Reference is made sometimes to virgin, sometimes to primary aggregates. The Commission notes also that these terms, in particular virgin and primary aggregates, are not used in the Finance Act 2001. It is therefore necessary to determine the objective assigned to the tax system of the AGL without referring to this terminology but by reference to its content. |
|
(64) |
The Commission first notes that while those terms are frequently used in the industry, they do not seem to have a uniform definition either. However, those terms seem to have in common that in their usual meaning they refer to (freshly) extracted aggregates that have not yet been used. |
|
(65) |
As is apparent from the documents surrounding the adoption of the AGL (46) and as results also from the explanations provided by the UK authorities (47) and summarized under section 2.2, the terms virgin/primary aggregates are used in opposition to recycled aggregates and alternatives such as wastes from industrial processes (slag, waste tyres and waste glass) but also to spoil from certain extraction activities (like the spoil of china clay, slate and coal extraction). Although technically the spoil from extraction activities (like the spoil of china clay and slate extraction) could qualify as virgin or even primary aggregates (if primary is understood as referring to natural aggregates), it has in common with wastes resulting from industrial processes that generally it does not constitute material that was specifically extracted in order to be used as aggregate. |
|
(66) |
Irrespective of the terminology used, it thus appears that the UK authorities oppose aggregates that were (freshly) extracted for their use as aggregates to various materials that were either not freshly extracted as aggregates or that were inevitably obtained as a result of other activities that were not aimed at the extraction of aggregates but which nonetheless could serve as alternatives to freshly and specifically extracted aggregates. |
|
(67) |
On the basis of the foregoing, and in particular in the light of the structure of the AGL resulting from the Sections 16(1), 16 (2), 17, 18 and 30 of the Finance Act 2001, as amended, and of the preparatory works, the Commission comes to the conclusion that the nature and logic of the AGL is the taxation of rock, gravel and sand (freshly) extracted for being used as aggregates, whenever they are used as such and are subjected to commercial exploitation within the UK on or after 1 April 2002. |
|
(68) |
As regards its objective, the Commission notes that the AGL aims at making the extraction of aggregates more efficient by internalising the environmental costs of that activity. In addition, it aims at shifting demand towards alternative sources of aggregates, i.e. recycled aggregates and material that were not extracted for their commercial exploitation as aggregates but which could serve as such. |
3.1.2. Differentiations
|
(69) |
The Finance Act 2001 starts from a very broad scope that is then narrowed down through exclusions and exemptions. In addition, the Finance Act 2001 also foresees a certain number of tax reliefs. The Commission will examine whether those exclusions, exemptions and tax reliefs are in line with the normal taxation principles guiding the AGL and whether the aggregates concerned by each exclusion or exemption are in a comparable situation with taxed materials in the light of the objective of the AGL. |
3.1.2.1. Exclusion of and tax relief for cut stone with one or more flat surfaces (Section 18(2)(a) and Section 30(1)(b))
|
(70) |
Dimension stone (cut stones with one or more flat surfaces) are used for instance to erect the walls of a house. Since such stones are not used to provide bulk, they are not in a comparable situation to rock used as aggregates. |
|
(71) |
The Commission therefore considers that this exclusion from the scope of the AGL is in line with the normal taxation principles underpinning the AGL. |
3.1.2.2. Exclusion of and tax relief for certain minerals (Section 18(2)(b) and Section 30(1)(b))
|
(72) |
The UK authorities have indicated that neither of the substances exempted under Section 18 (48) are quarried or mined for use as aggregates. |
|
(73) |
As long as those minerals are not used to provide bulk in the construction sector, the Commission believes that the exclusion of those minerals from the scope of the AGL is in line with its normal taxation principles. |
|
(74) |
The complainant has argued that the AGL lacks any environmental consistency because it exempts certain minerals the extraction of which has the same environmental impact as the extraction of aggregates. The Commission notes, however, that the AGL does not constitute a tax on mineral extraction in general but a tax on the extraction of aggregates subject to commercial exploitation in the UK. As the General Court has confirmed, it is the normal taxation principles underpinning the AGL that serve as reference point to examine whether the exemptions provide for a selective advantage (49). It must therefore be concluded that in so far as the minerals concerned are not used as aggregates, their exemption/exclusion from the AGL does not lead to a selective advantage within the meaning of Article 107 (1) TFEU. |
|
(75) |
However, it would seem that some of those minerals are sometimes also extracted to serve as aggregates. For instance, it seems that vermiculite and perlite serve to produce lightweight manufactured aggregates (50). The exclusion of these minerals, in so far as they are extracted to produce lightweight aggregates and are used as such, does not therefore seem in line with the normal taxation principles of the AGL and it is not clear to the Commission why the extraction of those minerals would not be in a comparable situation as the extraction of other taxed aggregates. |
|
(76) |
However, it is not clear from the information available which minerals exactly are used as aggregates. |
|
(77) |
Also, it is not clear since when those aggregates exist on the market, what they represent in terms of volume compared to the total amount of aggregates, how their sales have evolved since 2001 and whether the materials that served to produce those aggregates were extracted for use as aggregate because, for instance, they lack the quality required by the other "usual" uses of the minerals concerned. |
|
(78) |
Under such circumstances, the Commission doubts whether a general exemption of those materials, which does not seem to take into account their use as aggregates, is in line with the normal taxation principles underpinning the AGL. The UK authorities are invited to explain which minerals are used as aggregates. For those materials that are also used as aggregates, the UK authorities are invited to indicate what those aggregates represent in terms of volume and value compared to the total amount of aggregates, and how their sales have evolved since 2001. Should some of the minerals concerned be used as aggregates, the UK authorities are invited to explain why the nature and logic of the AGL require that they are exempted from the scope of the AGL. |
3.1.2.3. Exemption of material consisting wholly or mainly of, or being part of anything consisting of coal, lignite, slate or shale (Section 17(4)(a))
|
(79) |
The Commission notes that all those materials qualify as rock. |
|
(80) |
As far as slate and shale are concerned, they are often cut with one or more flat surfaces. In such case, they would be deemed excluded from the scope of the AGL also by virtue of Section 18 (2) (a). The exclusion of materials used as "cut-stone" is in line with the normal taxation principles underpinning the AGL. |
|
(81) |
The UK authorities have explained that coal, lignite, slate or shale are not primarily quarried for use as aggregates. Slate is traditionally extracted for use as a specialist building material (e.g. as roofing or flooring). In some regions its use is encouraged for heritage reasons. Shale is a fissile mineral with a high clay content. As natural clay deposits become depleted, shale is increasingly used in the manufacture of bricks and tiles. It can also be an ingredient in the production of cement. Coal is a sedimentary rock composed primarily of carbon. Lignite has a much lower carbon content than coal and a very high moisture content. Both are used as energy products. |
|
(82) |
Given that the AGL applies to aggregates, and therefore targets rocks, sand and gravels which are used for bulk in construction, excluding those materials when they are used for other purposes than as aggregates, seems to be in line with the normal taxation principle underpinning the AGL. |
|
(83) |
However, it would appear, according to evidence produced by the British Aggregates Association in attachment to their Reply submitted to the General Court in the initial case T-210/02, that slate and shale are used as aggregates (51). The Commission has not received any evidence suggesting that coal and lignite might also serve as aggregates. It is not entirely clear whether those materials would have the requisite qualities in terms of inertness. |
|
(84) |
A general exemption of shale and slate, even when they are used as aggregates or bulk for construction purposes, does not appear to be in line with the normal taxation principles underpinning the AGL and does not seem to result from the nature and general scheme of the AGL. |
|
(85) |
A general exemption can also not be accepted based on the argument that most of the time they are not used as aggregates. It is precisely because it was difficult to determine in advance to what use the materials would serve that the UK chose to grant a tax credit in case some of the materials subject to tax would be used for industrial and agricultural purposes. It is not clear why a tax relief instead of an outright exemption would not be more appropriate also in the case of shale and slate. |
|
(86) |
Also, it is not clear why the exemption also extends to material that is mainly (i.e. as of 50 %) made of coal, lignite, shale or slate. It would seem that when the material is made of between 50 and 100 % coal, lignite, shale and slate, the probability is even higher that the material will serve as aggregate and an upfront exemption seems even less justified. |
|
(87) |
Under such circumstances, a general exemption of those materials, in particular slate and shale, even when they are used as bulk for construction purposes does not seem to be in line with the normal taxation principles underpinning the AGL. |
3.1.2.4. Exclusion of and tax relief for limestone used for the production of lime or cement (Section 18(2)(c) and Section 30(1)(b))
|
(88) |
When limestone is used to produce lime or cement, it is not used to provide bulk but as a raw material in a chemical reaction process that leads to the production of a product that is chemically different from limestone and that does not serve as aggregate. |
|
(89) |
When limestone (CaCO3) is calcinated at about 1 000 °C in different types of lime kiln, quicklime is produced according to the reaction: CaCO3 + heat → CaO + CO2. Quicklime can be hydrated, i.e., combined with water. Hydrated lime, known as slaked lime, is produced according to the reaction: CaO + H2O → Ca(OH)2. Lime itself does not provide bulk but constitutes a binder. Cement is made by heating limestone (calcium carbonate) with small quantities of other materials (such as clay) to 1 450 °C in a kiln, in a process known as calcination, whereby a molecule of carbon dioxide is liberated from the calcium carbonate to form calcium oxide, or quicklime, which is then blended with the other materials that have been included in the mix. The resulting hard substance, called 'clinker', is then ground with a small amount of gypsum into a powder to make 'Ordinary Portland Cement', the most commonly used type of cement (often referred to as OPC). Both lime and cement serve as binder and not as aggregate. Lime also has other uses (among others agricultural uses). |
|
(90) |
The Commission therefore concludes that the exclusion of limestone used for the production of lime or cement, as well as the resulting lime or cement, is in line with the normal taxation principles of the AGL. |
3.1.2.5. Exemption of aggregates that are or derive from already taxed aggregates (Section 17(2)(c))
|
(91) |
This exemption appears to be in line with the logic of the AGL. Whenever the aggregate has already been taxed, it has already been impacted by the tax and the tax has already served its purpose. |
|
(92) |
In addition, the prevention of double taxation is a commonly accepted principle used in tax regimes. |
3.1.2.6. Exemption of aggregate that was removed from its originating site before 1 April 2002 (Section 17(2)(d))
|
(93) |
This exemption appears to be in line with the normal taxation principles of the AGL. It covers aggregates that had already left its originating site (which would normally have been the first commercial exploitation event triggering the AGL) before the commencement date of the AGL. |
3.1.2.7. Aggregates that have previously been used for construction purposes (whether before or after the commencement date) (Section 17(2)(b))
|
(94) |
This exemption concerns recycled aggregates. Recycled and freshly extracted aggregates are not in a comparable situation in the light of the nature and logic of the AGL. Recycled aggregates are in fact one of the alternative products towards which the UK authorities wish to direct the demand by establishing the AGL. Using recycled aggregates instead of freshly extracted aggregates reduces the need to extract fresh aggregates and thus reduces the environmental impact linked to the extraction of aggregates. In addition, it reduces the dumping of waste, thereby improving visual amenity. |
|
(95) |
The Commission notes that in situations where the aggregate stemming from recycling has already been subjected to the AGL, the exemption would be in any event justified pursuant to Section 17(2)(c) of the Finance Act 2001. |
|
(96) |
If the recycled aggregate stems from aggregates used in construction and that left their originating site before the commencement date, the exemption would in any event justified pursuant to Section 17(2)(d) of the Finance Act 2001. |
|
(97) |
The complainant contends that recycled material is also harmful for the environment because recycling may cause pollution, among others because of high energy consumption. The Commission notes however, that the AGL aims at addressing the environmental impact of aggregate extraction. In that regard, it cannot be disputed that using recycled instead of freshly extracted aggregates reduces the environmental impact associated to aggregates extraction. Therefore, the Commission concludes that recycled aggregates and freshly extracted aggregates are not in a comparable situation in the light of the objective of the AGL and the distinction made between recycled and freshly extracted aggregates results from the nature and logic of the AGL. |
3.1.2.8. Exemption of aggregate excavated in the course of construction and civil engineering works arising from the footprint of a building, navigational dredging, highway construction, railway construction (Section 17(3) (b), (c), (d) and (da) and Section 17(4)(d) and (e))
|
(98) |
Those aggregates unavoidably arise in the course of the works concerned (digging the foundation of a building, ensuring that waterways remain navigable, digging in order to lay a road, constructing and maintaining railways, bring tunnels, drilling for oil or gas, laying and maintaining gas mains and electricity cables). The works concerned do not relate to the extraction of sand, rock or gravel for their use as aggregates. In fact, the excavation does not occur with the purpose of obtaining those materials but with the purpose of making the space available and suitable for the construction of the road, the highway, the railway, the canal etc. |
|
(99) |
Although the works concerned also have an impact on the environment, this impact differs in several respects from the environmental costs linked to aggregates extraction (in particular quarrying). The visual damage, dust, noise linked to excavation activities will be limited compared to quarrying. Also, the excavation activities that are necessary to undertake the concerned works will be very limited in time, while specific aggregate extraction activities will extend over several decades. Finally, the environmental impact of those works arises not so much from the excavation of rock, sand and gravel but rather from the construction and civil engineering works as such (construction of a highway, existence of railway connection or a navigation channel). The AGL is not aimed at targeting the environmental impact of those works. |
|
(100) |
On the basis of those elements, the Commission finds that aggregates arising in the course of the works concerned are not in the same factual and legal situation as taxed materials in the light of the logic of the AGL. Their exemption from the AGL is justified by the nature and general scheme of the AGL. |
|
(101) |
In addition, by using those aggregates instead of sand, gravel and rock that was specifically extracted for use as aggregates, it is possible to reduce the need for specific aggregates extraction. It is also possible to reduce the amount of material sent to landfill for disposal. |
3.1.2.9. Exemption of aggregates consisting wholly of the spoil, waste or other by-products, not including the overburden, resulting from the extraction or other separation from any quantity of aggregate of any china clay or ball clay (Section 17(3)(e) and Section 17(3)(f)(ii))
|
(102) |
The UK authorities have explained that china clay (also known as "kaolin") (52) and ball clay (53) are valuable minerals. They are normally not quarried in order to serve as aggregates. Spoil consisting of waste rock and sand is an inevitable by-product of this extraction. China clay waste can be used in the construction of embankments and as general fill, in the production of bitumen bound materials for highway construction, and may be substituted for other fine aggregate in the manufacture of concrete. Ball clay waste can also be sold as aggregate into the construction market. |
|
(103) |
The UK authorities have highlighted that since the spoil resulting from ball clay and china clay extraction is available as soon as ball clay and china clay has been extracted and given that this spoil can provide an alternative to various sand, gravel and rock specifically extracted for use as aggregate, the exemption helps reducing the extraction of sand, gravel and rock that were specifically extracted for their use as aggregate and, on balance, the exemption helps reducing the environmental impact of aggregates extraction. In addition, using the spoil of china clay and ball clay extraction instead of sand, gravel and rock extracted specifically for use as aggregate, helps reducing waste hips and improves visual amenity. |
|
(104) |
The consultation paper issued prior to the AGL and the Guidelines for aggregates quarrying confirm that using the waste hips resulting from the quarrying of china clay and ball clay as bulk material for construction was perceived as one of the alternatives to the extraction of sand, gravel and rock specifically for use as aggregate. |
|
(105) |
The Commission observes, first, that he exempted materials present a certain number of similarities with taxed material. They also constitute rock, sand or gravel that can serve to provide bulk in the construction sector. They can thus constitute an aggregate that should be taxed in the light of the normal taxation principles. Moreover, while the exempted material is the inevitable by-product of china clay and ball clay extraction, it is at the same time also a material that is extracted (in general in a quarry). In other words, the exempted material constitutes a freshly extracted aggregate. From that point of view, it is in a comparable situation to non-exempted aggregates. In fact, the quarrying of the exempted material involves at first sight the same environmental damages as the quarrying of non-exempted material. |
|
(106) |
On the other hand, however, there may be a difference between the exempted material and non-exempted material in that the exempted materials constitute the spoil of china clay and ball clay extraction. It is an inevitable by-product of this extraction, which will occur not necessarily for the sake of aggregate extraction but in general for china clay and ball clay extraction. Indeed, both china clay and ball clay have specific properties that cannot always be replicated. On this basis, the spoil of china clay and ball clay extraction does not seem to be entirely in a comparable situation with taxed aggregates in the light of the logic of the AGL, in the sense that they would a priori not have been extracted for their own sake. It could be argued that without the china clay and ball clay extraction for other purposes, no extraction activity of spoil would have taken place. |
|
(107) |
It is however unclear whether this difference is sufficient to demonstrate that the tax exemption is required by the nature and logic of the AGL. |
|
(108) |
The first condition for such a differentiation to result from the logic of the AGL is that the exemption must be limited to by-products that are the inevitable spoil of china clay and ball clay extraction. The exemption seems to fulfil this condition, since the exempted product must wholly consist of the spoil, waste or other by-products resulting from the extraction china clay or ball clay. In addition, the exemption does not cover overburdens (54). |
|
(109) |
The second condition is that it must be ascertained that the exemption will not lead to more china clay or ball clay being extracted in order to obtain more exempted material that may be used as aggregates. Otherwise, it cannot be excluded that extraction activities will take place with the intention of extracting sand, gravel or rocks that can be exploited as aggregates while avoiding the tax. This issue does not seem to be tackled by the exemption. |
|
(110) |
In addition, while the spoil of china clay and ball clay are in a different situation compared with freshly extracted aggregates that were quarried for their use as aggregates, the difference is less striking when the exempted materials are compared, for example, with non-exempted materials that occur as the spoil of limestone extraction when the limestone is extracted to produce lime or when compared with the spoil of the extraction of rock to produce cut stone with one or more flat surfaces. It is not clear why the spoil of those processes is taxed but not the spoil of china clay and ball clay extraction |
|
(111) |
Finally, the reasoning above rests on the assumption that operators that are engaged in china clay and ball clay extraction are not willing to obtain the material that arises as spoil, waste and by-product of china clay and ball clay extraction. It is however unclear whether this assumption is correct. It also rests on the assumption that china clay and ball clay, as such, cannot serve as aggregates. However, if china clay and ball clay can be used as aggregates, it is hard to see what distinguishes the waste of those exempted materials from the waste of aggregate extraction which is taxed. |
|
(112) |
The UK authorities are therefore invited to explain, in the light of the objective assigned to the AGL (i) what distinguishes the spoil/waste/by-products of china clay and ball clay extraction from the spoil resulting from the extraction of limestone extracted to produce lime or from the spoil of the extraction of rock to produce cut stone with one or more flat surfaces (ii) whether china clay and ball clay could as such serve as aggregates, (iii) if china clay and ball clay can serve as aggregates, why the exemption is not subject to the condition that china clay and ball clay are not used as aggregate or for aggregate production, (iv) under the hypothesis that the exemption is also valid when china clay and ball clay is used as aggregate, what distinguishes the exempted material from the waste of aggregate extraction, which is taxed, (v) whether the exemption will not lead to an increase in china clay and ball clay extraction activities, having regard to the respective market price (vi) whether extraction would take place at the sites concerned if they would not be suitable for china clay and ball clay extraction. |
3.1.2.10. Exemption of aggregates consisting wholly of the spoil from any process by which coal, lignite, slate or shale has been separated from other rock after being extracted or won with that other rock or of the spoil from any process where the substances in section 18(3) have been separated from other rock after extraction or won with that other rock (Section 17(3)(f)(i) and (ii))
|
(113) |
Coal, lignite, slate and shale and the substances listed in Section 18(3) are normally not quarried for their use as aggregates but are quarried for other purposes. The UK has explained that the exemption is meant to encourage use rather than disposal in waste tips of the spoils. This both improves the visual landscape and reduces the need to extract other aggregates. |
|
(114) |
The Commission observes, first, that there may be a difference between the exempted material and non-exempted material in that the exempted materials constitute the spoil of the extraction of coal, lignite, slate, shale and the substances listed under Section 18(3). They are an inevitable by-product of this extraction, which will normally occur not for the sake of aggregate extraction but for the sake of extracting the concerned substances which are (normally) not used as aggregates. On this basis, the spoil of the extraction of coal, lignite, slate, shale and the substances listed under Section 18(3) does not seem to be in a comparable situation with taxed aggregates in the light of the logic of the AGL. |
|
(115) |
It is however unclear whether this difference is sufficient to demonstrate that the tax exemption is required by the nature and logic of the AGL. |
|
(116) |
The spoil of the extraction of coal, lignite, slate, shale and the substances listed under Section 18(3) is arguably not in a comparable situation with taxed aggregates only if the exemption is limited to the inevitable spoil of the extraction of those substances. This seems to be the case as the exemption is limited to material that constitutes at 100 % the spoil of the separation process. |
|
(117) |
The Commission notes however, that while the spoil of the extraction of coal, lignite, slate, shale and the substances listed under Section 18(3) are in a different situation compared with freshly extracted aggregates that were quarried specifically for their use as aggregates, the difference is less striking when the exempted materials are compared with non-exempted materials that occur as the spoil of limestone extraction when the limestone is extracted to produce lime or when compared with the spoil of the extraction of rock to produce cut stone with one or more flat surfaces. It is not clear why the spoil of those processes is taxed but not the spoil of the extraction of coal, lignite, slate, shale and the substances listed under Section 18(3). |
|
(118) |
In addition, the Commission wonders whether the exemption can be justified in the light of the objective assigned to the AGL if, for instance, slate and shale or any of the other substances listed in Section 18(3) is extracted to serve as aggregates. In addition, if the exemption applies even when slate and shale or another substance listed in Section 18(3) is used as aggregates, the Commission does not see what distinguishes the waste of those exempted materials from the waste of aggregate extraction which is taxed. |
|
(119) |
Also, it is unclear whether the exemption might not lead to more extraction of coal, lignite, shale and slate, for the purpose of obtaining exempted materials that can be used as aggregates. |
|
(120) |
The UK authorities are therefore invited to explain in the light of the objective assigned to the AGL (i) what distinguishes the spoil of the extraction of coal, lignite, slate, shale and the substances listed under Section 18(3) from the spoil resulting from the extraction of limestone extracted to produce lime or from the spoil of the extraction of rock to produce cut-stone with one or more flat surfaces (ii) why the exemption is not subject to the condition that slate and shale or the other substances listed in section 18(3) is not used as aggregate or for aggregate production, (iii) under the hypothesis that the exemption is also valid when slate and shale or the other substances listed in section 18(3) are used as aggregates, what distinguishes the exempted material from the waste of aggregate extraction, which is taxed, (iv) whether the exemption will not lead to an increase in coal, lignite, shale and slate extraction for the purpose of obtaining more exempted material that can be used as aggregates, having regard to the respective market price. |
3.1.2.11. Aggregates consisting wholly or mainly of, or is part of anything so consisting, the spoil or waste from, or by-products of any industrial combustion process or from the smelting or refining of metal (Section 17(4)(c) (i) and (ii))
|
(121) |
The UK authorities have indicated that the primary purpose of the concerned industrial process (e.g. coal-fired generation of electricity, smelting iron ore to produce steel)) is to produce a product which is not used as aggregate. The spoil, waste and by-products concerned are for instance industrial slag (blast furnace slag, basic oxygen furnace steel slag, electric arc furnace steel slag and combustion ash). |
|
(122) |
According to the UK authorities, the purpose of the exemption is to encourage use rather than disposal in waste tips (shift in demand). This both improves the visual landscape and reduces the need to quarry virgin aggregate. |
|
(123) |
The Commission wonders whether the spoil or waste from, or by-products of any industrial combustion process or from the smelting or refining of metal can still qualify as rock, sand or gravel. In any event, they do not constitute rock, gravel or sand that has been freshly extracted. They in fact constitute materials that have already been used before and come from materials that have not been extracted for their use as aggregates. |
|
(124) |
The Commission therefore concludes, that the spoil or waste from, or by-products of any industrial combustion process or from the smelting or refining of metal is not in the same legal and factual situation as taxed material in the light of the objective assigned to the AGL. |
|
(125) |
The Commission notes, however, that the exemption is not limited to the spoil or waste of, or by-products of any industrial combustion process or from the smelting or refining of metal only, but it also extends to materials that are mainly (i.e. as of 50%) composed of the spoil or waste of, or by-products of any industrial combustion process or from the smelting or refining of metal. It is not clear to the Commission why the exemption was not limited to the spoil or waste of, or by-products of any industrial combustion process or from the smelting or refining of metal only. |
3.1.2.12. Exemption for material wholly or mainly consisting of clay, soil or vegetable or other organic matter (Section 17(4)(f))
|
(126) |
Soil is a fine-grained mixture of mineral and organic constituents. Soil, vegetable or other organic matter do not qualify as rock, sand or gravel. |
|
(127) |
The UK authorities have explained that this provision was there to prevent that a cargo of soil that would punctually contain rock would qualify as aggregate. |
|
(128) |
This exemption seems in line with the normal taxation principles and the logic of the AGL. |
|
(129) |
Concerning clay, the UK authorities have explained that because of its plastic properties, clay is not usually considered a rock. The exemption clarifies this and avoids the need to identify and charge the AGL on any sand or stone naturally occurring together with the clay. |
|
(130) |
The Commission, however, notes that, in geological terms, clay is considered a rock. Also, it would seem that clay can be used as aggregate (55). Hence, in so far as a material wholly or mainly consisting of clay was extracted to be used as aggregate, it is not clear how the exemption can be justified on the basis of the normal taxation principles or to what extent it may be deemed in a different situation from taxed materials in the light of the logic of the AGL. |
3.1.2.13. Tax credit for exported aggregates (Section 30(1)(a))
|
(131) |
Aggregates that are exported without further processing within the UK are not subject to the AGL. |
|
(132) |
Such an arrangement is justified by the fact that aggregates extracted or produced in the UK may be exempted if they are used for exempt processes (for example, the manufacture of glass, plastics, paper, fertiliser and pesticides). Since the UK authorities have no control over the use of aggregates outside their jurisdiction, the exemption for exports is necessary in order to provide legal certainty to aggregates’ exporters and to avoid imposing an unequal treatment on exports of aggregates that would otherwise qualify for an exemption if they were used for other purposes within the UK. |
|
(133) |
The General Court has confirmed that since the AGL is designed to tax only materials that are exploited as aggregates, materials that are marketed in the UK and those that are exported overseas are in different situations because, once those materials have been exported, it is, as a rule, no longer possible for the UK authorities to check the application of the decisive criterion for taxation: commercial exploitation as an aggregate. Those authorities will be unable, or able only with difficulty, to determine whether an exported material is likely to be used and exploited as an aggregate, whether it actually is to be used as such, or whether it is to be used for other purposes, which also depends on the statutory specifications applicable in the country of destination. |
|
(134) |
Also the General Court has rejected the complainant's argument that it would be particularly easy for the UK authorities to identify the physico-chemical properties of materials intended to be exported, so as to determine whether or not they are suitable for use in the processes that would ensure their exemption under the AGL. Classification as an aggregate subject to tax or as an exempt material does not depend precisely on those physical properties. The exclusion from the scope of the AGL depends on the materials meeting other criteria related, inter alia, to their use or the method through which they were obtained. |
|
(135) |
On this basis, the Commission concludes that the tax credit for exported aggregates is in line with the taxation principles and logic of the AGL. |
3.1.2.14. Tax credit for industrial and agricultural processes (Section 30(1)(c))
|
(136) |
To the Commission's knowledge, none of the concerned tax relief is granted when rock, sand or gravel are used as aggregates. In this respect the Notice AGL 2 states that: "If the material under consideration is not being used as an aggregate, it may qualify for relief. In most instances it will be quite obvious whether it is being used as an aggregate or not, but in some instances it will not. For some products, such as ‘synthetic’ roof tiles, material will be used both as an aggregate (to provide bulk) which will not be eligible for relief and as non-aggregate (for example limestone ground down to a fine powder to act as a ‘glue’ or binding medium) which will be relieved from the levy." |
|
(137) |
As the tax relief is granted only when the concerned rock, gravel or sand is used for other purposes than as aggregate, the tax relief is in line with the normal taxation principles underpinning the AGL. |
3.1.3. Conclusion
|
(138) |
On the basis of the information provided so far, the Commission comes to the conclusion that the exemptions, exclusions and tax reliefs established in Sections 17(2)(b), 17(2)(c), 17(2)(d), 17(3)(b), 17(3)(c), 17(3)(d), 17(3)(da), 17(4)(d) and 17(4)(e), Section 17(4)(a) (in so far as the exempted material consist wholly of coal, lignite, shale, slate that is used for other purposes than as aggregate), Section 17(4)(c) (when it consists wholly of the spoil), Section 17(4)(f) (except for clay), Section 18(2)(a), Section 18(2)(b) (in so far as it relates to materials that are not used as aggregates), Section 18(2)(c), Section 30(1)(a), Section 30(1)(b) (in so far as it relates to exempt processes within the meaning of Section 18(2) (a) and (c)), Section 30(1)(b) (in so far as it relates to an exempt process within the meaning of Section 18(2) (b) that provides for materials that are not used as aggregates), and 30(1)(c) of the Finance Act 2001, as amended by Finance Act 2002 and Finance Act 2007 are in line with the taxation principles and logic of the AGL. Consequently, they do not provide a selective advantage to producers of the concerned exempted materials and do not constitute State aid within the meaning of Article 107(1) TFEU. |
|
(139) |
On the basis of the information that was so far submitted to it, the Commission cannot conclude without doubts that the exemptions and exclusions provided for in Sections 17(3)(e), 17(3)(f)(i) and (ii), Section 17(4)(a) (in so far as the exempted material consist wholly of coal, lignite, shale, slate that is used as aggregate or consist mainly of coal, lignite, shale and slate), Section 17(4)(c)(i) and (ii) (when it consists mainly of the spoil), 17(4)(f) (as far as clay is concerned), 18(2)(b) (in so far as it relates to an exempt process that provides for materials that are used as aggregates) and 30(1)(b) (in so far as it relates to an exempt process within the meaning of Section 18(2)(b) that provides for materials that are used as aggregates) of the Finance Act 2001, as amended by Finance Act 2002 and Finance Act 2007 are in line with the taxation principles and logic of the AGL. Therefore, at this juncture the Commission cannot exclude that those exclusions, exemptions and tax reliefs confer a selective advantage to the producers of the exempted aggregates concerned, in that they relieve them from a charge that they should normally pay. |
|
(140) |
Given that the tax exemptions, exclusions and tax reliefs are financed from State resources and are imputable to the State; given also, that there is trade between Member States in the aggregates sector and that producers of the exempted aggregates are in competition with other aggregate producers, the Commission concludes that it cannot be excluded, at this stage, that the AGL entails State aid for the producers of certain exempted aggregates. |
|
(141) |
The Commission therefore will examine below whether they could be considered as compatible with the internal market. |
3.2. Legality of the aid
|
(142) |
Although the AGL was notified by the UK authorities before being put into effect, the recipients of the aid cannot entertain legitimate expectations as to the lawfulness of the implementation of the aid, since the Commission decision not to raise objections to the measure was challenged in due time before the General Court (56). As the Commission decision was annulled by the General Court, that decision must be considered void with regard to all persons as from the date of its adoption. Since the annulment of the Commission decision put a stop, retroactively, to the application of the presumption of lawfulness, the implementation of the aid in question must be regarded as unlawful (57). In addition, the Commission notes that, in any event, the AGL entered into force on 1 April 2002, before the Commission adopted its decision of 24 April 2002. |
3.3. Compatibility of the aid
|
(143) |
Given the environmental purpose of the AGL, the Commission has examined its compatibility with the internal market in accordance with Article 107(3)(c) TFEU and in the light of Guidelines on State aid for environmental protection. |
|
(144) |
As mentioned in recital 142 above, the result of the annulment of the Commission decision is that the aid must be deemed unlawful. In accordance with the Commission notice on determination of the applicable rules for the assessment of unlawful State aid (58), paragraph 82 of the 2001 Community Guidelines on State aid for environmental protection (59) ("2001 EAG") and paragraph 205 of the 2008 Community Guidelines on State aid for environmental protection (60) ("2008 EAG") the Commission has assessed the compatibility of the tax exemptions and reliefs under the 2001 EAG in so far as they were applied between 01.04.2002 and 31.03.2008 and under the 2008 EAG as far as they were applied as from 02.04.2008. |
|
(145) |
The procedure for adopting a new decision may be resumed at the very point at which the illegality occurred (61). In the context of the State aid discipline, the Court of Justice has held that if the analysis carried out by the Commission in a previous decision has been defective, thus entailing the illegality of that decision, the procedure for replacing that decision can be resumed at that point by means of a fresh analysis of the examination already undertaken (62). |
|
(146) |
In the light of the case-law mentioned above, the Commission is entitled, in principle, to readopt a decision concerning the aid measure within the preliminary investigation and based on the information available to it at the time of the adoption of the annulled decision, provided that such information is sufficient for its assessment. However, should this information be insufficient to demonstrate that the aid measure was compatible with the internal market, it is the Commission's duty to open the formal investigation in accordance with Article 108(2) TFEU. |
3.3.1. 2001 EAG
|
(147) |
Paragraph 47 provides that: "When adopting taxes that are to be levied on certain activities for reasons of environmental protection, Member States may deem it necessary to make provision for temporary exemptions for certain firms notably because of the absence of harmonisation at European level or because of the temporary risks of a loss of international competitiveness. In general, such exemptions constitute operating aid caught by Article 87 of the EC Treaty. In analysing these measures, it has to be ascertained among other things whether the tax is to be levied as the result of a Community decision or an autonomous decision on the part of a Member State." |
|
(148) |
Paragraph 48 further provides that: "If the tax is to be levied as the result of an autonomous decision on the part of a Member State, the firms affected may have some difficulty in adapting rapidly to the new tax burden. In such circumstances there may be justification for a temporary exemption enabling certain firms to adapt to the new situation." |
|
(149) |
In this connection, the Commission notes that the AGL is a tax to be levied on the extraction of aggregates for reasons of environmental protection. The Commission further notes that the AGL is to be levied as a result of an autonomous decision by the UK authorities. |
|
(150) |
The complainant has contended that some of the exemptions have been granted in order to protect the international competitiveness of the producers of exempted materials. This would suggest that certain firms may have some difficulty in adapting rapidly to the new tax burden and, in that case, the exemptions from the AGL could be assessed under paragraphs 47 and 48 of the 2001 EAG. |
|
(151) |
According to settled case-law, it is for the Member State to put forward any grounds of compatibility and to demonstrate that the conditions thereof are met (63). |
|
(152) |
The Commission notes that, given that the UK authorities consider that the measure at hand does not constitute State aid, they have not brought forward any grounds for its compatibility. |
|
(153) |
At this juncture, the Commission does not have sufficient elements to conclude whether the conditions of paragraphs 47 and 48 of the 2001 EAG are met, nor does it have sufficient elements to conclude whether the exemptions could be found compatible with the internal market based on other provisions than paragraphs 47 and 48 of the 2001 EAG. In fact, it is not yet clear what purpose or purposes are pursued through the exemptions. While the complainant contends that they aim at protecting the international competitiveness of certain companies, there are also indications in the file that they pursue an environmental objective of their own (reduction of waste hips resulting from coal, shale, slate, lignite, china clay, ball clay extraction and other materials that do not usually serve as aggregates). |
3.3.2. 2008 EAG
|
(154) |
Given the environmental purpose of the AGL, the Commission has also examined the tax exemptions and exclusions under chapter 4 of the 2008 EAG that concerns operating aid in the form of reductions of environmental taxes. |
|
(155) |
Environmental taxes are defined in point 70(14) of the 2008 EAG as "taxes whose specific tax base has a clear negative effect on the environment or which seek to tax certain activities, goods or services so that the environmental costs may be included in their price and/or so that producers and consumers are oriented towards activities which better respect the environment." |
|
(156) |
It is not contested that the extraction of aggregates has a negative impact on the environment, in particular in the form of damage to biodiversity, dust, noise, and visual amenity. This is further substantiated by the studies commissioned by the UK authorities referred to in recital 17 above. The AGL thus constitutes an environmental tax within the meaning of point 70(14) of the 2008 EAG and the tax exemptions could be assessed under Chapter 4 of the 2008 EAG in so far as they applied as of 02.04.2008. |
3.3.2.1. Environmental benefit
|
(157) |
In accordance with point 151 of the 2008 EAG, aid in the form of reductions from environmental taxes will be considered compatible with the internal market provided that it contributes at least indirectly to an improvement of the level of environmental protection and that the tax reductions do not undermine the general objective pursued. As explained in point 57 of the 2008 EAG, reductions from environmental taxes concerning certain sectors or categories of undertakings are accepted under Chapter 4 of the 2008 EAG if they make it feasible to adopt higher taxes for other undertakings, thus resulting in an overall improvement of cost internalisation, and to create further incentives to improve on environmental protection. The Commission considered that this type of aid may be necessary to target negative externalities indirectly by facilitating the introduction or maintenance of relatively high national environmental taxation. |
|
(158) |
In this case, the possibility to grant exemptions for certain materials might have enabled the UK to introduce the AGL. |
|
(159) |
Given, however, that the UK authorities consider that the measure at hand does not constitute aid, they have not brought forward information showing that the exemptions were necessary in order for the UK to adopt the AGL. Also, they have not shown that the exemptions would not undermine the purpose of the tax. |
3.3.2.2. Tax reliefs above the harmonised Community minima and other reliefs
|
(160) |
Taxation of aggregates has not been harmonised at EU level and the Commission has therefore analysed the necessity and proportionality of the proposed measure in the light of points 158 and 159 of the 2008 EAG. |
3.3.2.3. Necessity of the aid
Objective and transparent criteria
|
(161) |
In accordance with point 158(a) of the 2008 EAG, the choice of beneficiaries must be based on objective and transparent criteria and aid should be granted in the same way for all competitors in the same sector if they are in a similar factual situation. |
|
(162) |
The tax reduction is based on criteria established in the law. They are thus transparent. |
|
(163) |
Given, however, that the UK authorities consider that the measure at hand does not constitute aid, they have not yet brought forward information showing that the exemptions are based on objective criteria and are granted in the same way to all competitors in the same sector if they are in a similar factual situation. |
Substantial increase in production costs
|
(164) |
In line with point 158(b) of the 2008 EAG, for aid in the form of reductions or exemptions from an environmental tax to be considered necessary, the tax without reduction must lead to a substantial increase in production costs for each sector or category of individual beneficiaries. In the case of taxes related to energy, companies which fall within the definition on energy-intensity are presumed to meet these criteria, without a further test on the absolute share of additional costs on the production costs being carried out. For the purposes of energy taxation, a company is presumed to fulfil the criterion of a substantial increase in production costs, if it is energy-intensive, i.e. if it has costs for energy and electricity exceeding 3 % of its production costs. |
|
(165) |
The information available in the file seems to suggest that the AGL might in some case double the price of the aggregates concerned, thus leading to a substantial increase in production costs. Given, however, that the UK authorities consider that the measure at hand does not constitute aid, they have not yet brought forward information showing that tax would lead to a substantial increase in production costs and a definitive conclusion on this point cannot yet been reached. |
Impossibility to pass on the substantial increase in production costs
|
(166) |
According to point 158(c) of the 2008 EAG, compliance with the necessity criteria requires that the substantial increase in production costs cannot be passed on to customers without leading to important sales reductions. |
|
(167) |
Given, that the UK authorities consider that the measure at hand does not constitute aid, they have not yet brought forward information showing that it is impossible for each of the exempted materials concerned to pass on to costumers the substantial increase in production costs. |
3.3.2.4. Proportionality of the aid
|
(168) |
With respect to proportionality, each beneficiary of a reduction or exemption must in accordance with point 159 of the 2008 EAG fulfil one of the following criteria:
|
|
(169) |
Given, that the UK authorities consider that the measure at hand does not constitute aid, they have not yet brought forward information showing that the tax exemptions are proportionate in accordance with point 159 of the 2008 EAG. |
3.4. Commission's doubts and grounds for opening the formal investigation procedure
|
(170) |
At this stage, based on the information that was submitted to it, the Commission has come to the preliminary conclusion that the exemptions and exclusions mentioned in recital 139 above do not seem to be justified by the general principles and logic of the AGL. The exemptions and exclusions concerned seem to relieve the beneficiaries from a tax that they would normally have to pay and constitute operating aid. |
|
(171) |
According to the case-law, operating aid is in principle not compatible with the internal market because it has the effect in principle to distort competition in the sectors in which it is granted (64). |
|
(172) |
According to settled case-law, it is for the Member State to put forward any grounds of compatibility and to demonstrate that the conditions thereof are met (65). |
|
(173) |
The Commission notes that, given that the UK authorities consider that the measure at hand does not constitute aid, they have not brought forward any grounds for establishing its compatibility under 2001 EAG, 2008 EAG or under Article 107(3)(c) TFEU. |
|
(174) |
At this stage, based on the information that was submitted to it, the Commission does not have sufficient elements to conclude whether the conditions of paragraphs 47 and 48 of the 2001 EAG and whether the conditions of chapter 4 of the 2008 EAG are met or whether the tax exemptions and exclusions could be found compatible pursuant to other provisions. |
|
(175) |
The Commission has therefore, at this stage, doubts as to their compatibility with the internal market and, in accordance with Article 4(4) of Regulation (EC) No 659/1999, it has decided to open the formal investigation procedure, thereby inviting the United Kingdom to submit its comments as well as the requested information. The formal investigation procedure will also give the opportunity to third parties whose interests may be affected by the granting of the aid to comment on the measure. |
|
(176) |
In the light of both the information notified by the Member State concerned and that provided by any third parties, the Commission will re-assess the measure and will take its final decision. |
4. DECISION
In the light of the foregoing assessment, the Commission has decided:
|
A. |
To raise no objections in respect of the exemptions, exclusions and tax reliefs laid down in Sections 17(2)(b), 17(2)(c), 17(2)(d), 17(3)(b), 17(3)(c), 17(3)(d), 17(3)(da), 17(4)(d) and 17(4)(e), Section 17(4)(a) (in so far as the exempted material consist wholly of coal, lignite, shale, slate that is used for other purposes than as aggregate), Section 17(4)(c) (when it consists wholly of the spoil), Section 17(4)(f) (except for clay), Section 18(2)(a), Section 18(2)(b) (in so far as it relates to materials that are not used as aggregates), Section 18(2)(c), Section 30(1)(a), Section 30(1)(b) (in so far as it relates to exempt processes within the meaning of Section 18(2) (a) and (c)), Section 30(1)(b) (in so far as it relates to an exempt process within the meaning of Section 18(2) (b) that provides for materials that are not used as aggregates), and 30(1)(c) of the Finance Act 2001, as amended by Finance Act 2002 and Finance Act 2007, in relation to the AGL, since the Commission considers that they do not entail State aid within the meaning of Article 107(1) of the Treaty. |
|
B. |
To initiate the procedure laid down in Article 108(2) of the Treaty in respect of the tax exemptions, tax exclusions and tax reliefs laid down in Sections 17(3)(e), 17(3)(f)(i) and (ii), Section 17(4)(a) (in so far as the exempted material consist wholly of coal, lignite, shale, slate that is used as aggregate or consist mainly of coal, lignite, shale and slate), Section 17(4)(c)(i) and (ii) (when it consists mainly of the spoil), 17(4)(f) (as far as clay is concerned), 18(2)(b) (in so far as it relates to an exempt process that provides for materials that are used as aggregates) and 30(1)(b) (in so far as it relates to an exempt process within the meaning of Section 18(2)(b) that provides for materials that are used as aggregates), of the Finance Act 2001, as amended by Finance Act 2002 and Finance Act 2007 in relation with the AGL, since the Commission cannot exclude that they may entail State aid that is incompatible with the internal market. In this connection and in the light of the foregoing considerations, the Commission, acting under the procedure laid down in Article 108(2) of the Treaty requests the United Kingdom to submit its comments and to provide all such information as may help to assess the measure, in particular the information and clarifications requested in recitals 78, 112, 120, 153, 159, 163, 165, 167, 169 above, within one month of the date of receipt of this letter. The Commission invites the UK authorities to transmit immediately copy of the present decision to all potential beneficiaries of the aid, or at least to proceed to inform them with appropriate means. The Commission wishes to remind the United Kingdom that Article 108(3) of the Treaty on the Functioning of the European Union has suspensory effect, and would draw your attention to Article 14 of Council Regulation (EC) No 659/1999, which provides that all unlawful aid may be recovered from its recipient. The Commission warns the United Kingdom that it will inform interested parties by publishing this letter and a meaningful summary of it in the Official Journal of the European Union. It will also inform interested parties in the EFTA countries which are signatories to the EEA Agreement, by publication of a notice in the EEA Supplement to the Official Journal of the European Union and will inform the EFTA Surveillance Authority by sending a copy of this letter. All such interested parties will be invited to submit their comments within one month of the date of such publication.’ |
(1) OJ C 133 of 05.06.2002, p. 11.
(2) See Case C-199/06 CELF [2008] ECR I-469, paragraphs 63 and 66 to 68.
(3) See Case C-199/06 CELF, cited above, paragraphs 61 and 64.
(4) OJ C 133 of 05.06.2002, p. 11.
(5) Wikipedia: https://en.wikipedia.org/wiki/Construction_aggregate (29.05.2013); FAOterm: http://termportal.fao.org/faoterm/search/pages/termUrl.do?id=204 (29.05.2013), European Standard BSEN 12620:2002; Dictionary of Building, James H. Maclean and John S. Scott, Penguin Books, fourth edition; Oxford Dictionary of Construction, Surveying & Civil Engineering, Christopher Gorse, David Johnston and Martin Pritchard, Oxford University Press 2012; Glossary of Building and Civil Engineering Terms, British Standard Institution, Blackwell Scientific Publications, 1993, 100-4403; http://www.uepg.eu/what-are-aggregates. See also Case T-210/02 RENV of 7 March 2012, Britisch Aggregates Association v Commission, not yet published, paragraph 1.
(6) Concrete is a mixture of aggregates, cement and water. The purpose of the aggregates within this mixture is to provide a rigid skeletal structure and to reduce the space occupied by the cement paste.
(7) Aggregates are widely used in drainage application due to their high hydraulic conductivity value.
(8) Aggregates are used as base material under foundations, roads, and railroads. In that case, they help filling voids and protecting pipes (pipes laid to convey treated water, or as conduits for cables, need to be protected from sharp objects in the ground and are therefore laid on, and surrounded by fine aggregate before trenches are backfilled). Aggregates also help providing hard surfaces (they prevent differential settling under the road or building or railway - Unpaved roads and parking areas are covered in a surface layer of aggregate to provide a more solid surface for vehicles, from cycles to lorries. This prevents the vehicles from sinking into the soil, particularly during wet weather. Wikipedia: https://en.wikipedia.org/wiki/Construction_aggregate (29.05.2013); http://sustainableaggregates.com/overview/uses.htm (29.05.2013).
(9) European Standard BSEN 12620:2002.
(10) UEPG, http://www.uepg.eu/what-are-aggregates, visited on 28.03.2013. See also, http://www.bgs.ac.uk/planning4minerals/assets/downloads/86210_P4M_A_Guide_On_Aggregates.pdf p. 6.
(11) http://www.bgs.ac.uk/planning4minerals/Resources_1.htm (29.05.2013); http://sustainableaggregates.com/sourcesofaggregates/recycled/rib_introduction.htm (29.05.2013); http://www.uepg.eu/what-are-aggregates (29.05.2013).
(12) Glossary of Building and Civil Engineering Terms, British Standard Institution, Blackwell Scientific Publications, 1993, 630- 3.
|
|
http://www.bgs.ac.uk/mineralsuk/mines/aggregates.html; |
|
|
http://www.bgs.ac.uk/planning4minerals/assets/downloads/86210_P4M_A_Guide_On_Aggregates.pdf |
|
|
http://www.bgs.ac.uk/planning4minerals/Resources_1.htm; |
|
|
http://aggregain.wrap.org.uk/terminology/primary.html |
(14) http://www.bgs.ac.uk/planning4minerals/assets/downloads/86210_P4M_A_Guide_On_Aggregates.pdf; http://www.uepg.eu/what-are-aggregates;
http://www.bgs.ac.uk/planning4minerals/Resources_1.htm;
http://aggregain.wrap.org.uk/terminology/secondary.html; MPG6 - Guidelines for Aggregates Provision in England 1994, para. 6-119 (1).
(15) See Aggregates Levy – Consultation on waste aggregate released on 9th December 2002.
(16) Colliery spoil is the solid residual material resulting from the mining of coal. It is likely to contain varying proportions of sandstone, shale, mudstone and coal fragments. The properties of colliery spoil can vary considerably both within a tip and from tip to tip. These solid wastes are also known as minestone. Burnt colliery spoil is the residue following ignition of coal mine spoil heaps which results in partial to complete combustion of coal particles in the spoil, leaving calcinated rock. Burnt colliery spoil has broader applications as an aggregate than unburnt colliery spoil, since all the combustible material has been removed (http://aggregain.wrap.org.uk/terminology/burnt_colliery.html).
(17) http://www.bgs.ac.uk/planning4minerals/Resources_1.htm (29.05.2013); Glossary of Building and Civil Engineering Terms, British Standard Institution, Blackwell Scientific Publications, 1993, 630- 3 (manufactured aggregates).
(18) http://sustainableaggregates.com/overview/uses.htm (29.05.2013); HM Customs & Excises – Consultation on a Potential Aggregates Tax – Summary of Replies, April 1999, para. 18.
(19) For instance, sand, usually silica sand, is used to make moulds in a foundry. Another example is limestone, or calcium carbonate. Ground to a fine powder it is used as a whitening agent or filler in paper, adhesives, paint, plastics, PVC, toothpaste, medical tablets and cleaning products. It is also used to provide additional calcium in vitamin and mineral supplements, flour and animal feed. Silica sand is also the principal filtration medium used by the water industry to extract solids from waste water.
(20) Lime is taken up by plants (either crops or grass) and trees but is also naturally lost from soils through leaching by rainwater and the use of fertilisers. This can result in an increase in acidity, loss of fertility in the soil and sometimes an adverse effect on soil structure. To redress the balance, 'agricultural lime' is applied to fields to maintain the necessary growing conditions for crops or grassland. Lime can be simply ground limestone or dolomite (which also contains magnesium) or burnt limestone, (or burnt dolomite) where the rock is heated in a kiln.
(21) MPG6 - Guidelines for Aggregates Provision in England 1994, para. 6-123 (23).
(22) Financial Statement and Budget Report 1997 – Chapter 2: The Budget Measures – Protecting the environment and health, para. 2.22.
(23) The Environmental Costs and benefits of the supply of aggregates, phase 1 – published by DETR, April 1998.
(24) The Environmental Costs and benefits of the supply of aggregates, phase 2 – published by DETR, July 1999.
(25) Pre-Budget Report – November 1998 – Chapter 5: Fairness – Protecting the environment, para. 5.63.
(26) Budget 2000 – Prudent for a Purpose: Working for a Stronger and Fairer Britain – Chapter 6: Protecting the environment – Regenerating our cities/protecting our countryside – Waste; Aggregates, para. 6.90.
(27) Budget announcement March 2000 – Prudent for a Purpose: Working for a Stronger and Fairer Britain – Chapter 6: Protecting the environment – Regenerating our cities/protecting our countryside – Waste; Aggregates, para. 6.91; Pre-Budget Report – November 2001 – Chapter 7: Protecting the environment – Protecting Britain's countryside – Aggregates quarrying – The aggregates levy, para. 7.71; Budget announcement March 2001 – Chapter 6: Protecting the environment, para. 6.91.
(28) Letter dated 19.02.2002, registered on 21.02.02 under A/31371, para. 4.10.
(29) This provision is meant to cover the case where the aggregate is transferred from one site to the other belonging to the same operator. The transfer from site to site is normally not subjected to the AGL, see Section 19(3)(b) of Finance Act 2001.
(30) The UK authorities indicated that aggregate is subject to an agreement to supply when a contract is made or when the goods change hands and a document is raised. Section 19(6) of Finance Act 2001 indicates that an aggregate will be subjected to the agreement at the moment it is separately identifiable. Also it provides that for the purpose of the levy, the transfer of ownership of land on which aggregates are located does not automatically amount to a supply of the aggregate too.
(31) Permitted circumstances are defined at subsection (7) of section 19. It concerns the situation where the aggregate is mixed with taxable aggregates that have not previously borne the AGL and all the mixing takes place at a site which is the originating site, a site registered under the same name as the originating site or a site to which aggregate has been removed for an exempt process to be applied to it but which has not been applied to it.
(32) The landing site of aggregates corresponds to an originating site only for aggregates extracted from the UK seabed/waters.
(33) See also Notice AGL 1: Aggregates Levy, April 2011, point 8.1.
(34) This latter provision relates to the situation where the aggregate is returned to the land where it was won and is still in the same state as it was won. In such situation there is no taxable supply of aggregates.
(35) See Notice AGL 1.
(36) The Aggregates Levy (General) Regulations 2002 (SI 2002/761) prescribe in which cases the disposal of aggregates may lead to a tax relief. According to regulation 13a person is entitled to a tax credit in respect of any AGL accounted for where the taxable aggregate in question is disposed of (by dumping or otherwise) in any of the following ways:
|
i. |
it is returned without further processing to its originating site or any site which is not its originating site but is registered under the same name; |
|
ii. |
it is disposed of to landfill; |
|
iii. |
it is gravel or sand and is used for beach restoration purposes at a site which is not its originating site. |
(37) Notice AGL2 Industrial and Agricultural Processes Relief, available on the website of HM Revenue & Customs.
(38) see Joined Cases C-328/99 and C-399/00 Italy and SIM 2 Multimedia v Commission [2003] ECR I-4035, paragraph 35; Case C-222/04 Cassa di Risparmio di Firenze and Others [2006] ECR I-289, paragraph 131; and Joined Cases C-393/04 and C-41/05 Air Liquide Industries Belgium [2006] ECR I-5293, paragraph 29 and the case-law cited.
(39) Case C-143/99 Adria-Wien Pipeline [2001] ECR I-8365, paragraph 41; see also Case C-172/03 Heiser [2005] ECR I-1627, paragraph 40; Joined Cases C-182/03 and C-217/03 Belgium and Forum 187 v Commission [2006] ECR I-5479, paragraph 119; Case C-88/03 Portugal v Commission [2006] ECR I-7115, paragraph 54; and Joined Cases C-428/06 to C-434/06 UGT-Rioja and Others [2008] ECR I-6747, paragraph 46; Case T-210/02 RENV, British Aggregates Association v Commission, paragraph 47; Case C-487/06 P, British Aggregates Association v Commission [2008] ECR I-10515, paragraph 82.
(40) Adria-Wien Pipeline, cited above in footnote 36, paragraph 42, and Portugal v Commission, cited in footnote 36, paragraph 52; Case C-487/06 P, British Aggregates Association v Commission [2008] ECR I-10515, paragraph 83.
(41) Portugal v Commission, cited in footnote 36, paragraph 56, and Case T-308/00 Salzgitter v Commission [2004] ECR II-1933, paragraph 81; Case T-210/02 RENV, British Aggregates Association, cited in footnote 36, paragraph 49.
(42) Case T-210/02 RENV, British Aggregates Association, cited in footnote 36, paragraph 51.
(43) See Economic and Fiscal Strategy Report and Financial Statement and Budget Report 1999 – Chapter 5: Building A Fairer Society – Tackling tax abuse; Protecting the environment p.27 "The Government will shortly publish draft legislation for a tax on the extraction of hard rock, sand and gravel used as aggregates". See also Budget announcement March 2000 – Prudent for a Purpose: Working for a Stronger and Fairer Britain – Chapter 6: Protecting the environment – Regenerating our cities/protecting our countryside – Waste; Aggregates, para. 6.91; Pre-Budget Report – November 2001 – Chapter 7: Protecting the environment – Protecting Britain's countryside – Aggregates quarrying – The aggregates levy, para. 7.71; Budget announcement March 2001 – Chapter 6: Protecting the environment, para. 6.91; showing that the UK authorities envisaged specifically a tax on aggregates only.
(44) Case T-210/02 RENV, British Aggregates Association, cited in footnote 36, paragraph 66.
(45) HM Customs & Excises – Consultation on a Potential Aggregates Tax – Summary of Replies, April 1999, para. 13.
(46) See in particular MPG6 - Guidelines for Aggregates Provision in England 1994, para. 6-119 (1); Budget announcement March 2000 – Prudent for a Purpose: Working for a Stronger and Fairer Britain – Chapter 6: Protecting the environment – Regenerating our cities/protecting our countryside – Waste; Aggregates, para. 6.91; Pre-Budget Report – November 2001 – Chapter 7: Protecting the environment – Protecting Britain's countryside – Aggregates quarrying – The aggregates levy, para. 7.71; Budget announcement March 2001 – Chapter 6: Protecting the environment, para. 6.91.
(47) Letter of 19.02.2002, registered on 21.02.2002 under reference A/ Letter dated 19.02.2002, registered on 21.02.02 under A/31371, para. 4.11; Letter of 27.09.2012, p2, reply to question 2.
(48) Those substances also benefit from a tax relief when the tax was paid and the exempt process took place afterwards (Section 30(1)(b)). The assessment of the exclusion applies mutatis mutandis to the tax relief.
(49) Case T-210/02 RENV, paragraphs 51 and 66.
(50) See Glossary of Building and Civil Engineering Terms, British Standard Institution, Blackwell Scientific Publications, 1993, 630-3007 and 630-3013.
(51) Extracts (dated 30.10.2002) from the website of Alfred McAlpine
Published at: http://www.amslate.com/applications/ima/ima.sbtml; Extracts from Construction Raw Materials Policy and Supply Practices in Northwestern Europe – Facts and Figures – England, Scotland and Wales (Great Britain), British Geological Survey Commissioned Report CR/02/082N commissioned by the Road and Hydraulic Engineering Institute of the Ministry of Public Works and Water Management of the Netherlands, p. 50; Document by Geoff Topham of Aggregate Industries concerning quarrying at Holme Park Quarry, 19 June 2002.
(52) According to the information provided by the UK, china clays are fine-grained sedimentary clays consisting of kaolinite. They are used in the production of porcelain and gloss paper, medical and cosmetic products.
(53) Ball clays are fine-grained kaolinitic sedimentary clays, that commonly consist of 20-80 % kaolinite, 10-25 % mica, 6-65 % quartz. They are used in the production of ceramics to impart plasticity and unfired strength.
(54) Layers of ground that have to be removed before reaching the layer containing the china clay or ball clay.
(55) See Glossary of Building and Civil Engineering Terms, British Standard Institution, Blackwell Scientific Publications, 1993, 630-3006; see also evidence submitted by the British Aggregates Association in its reply to the Court in case T-210-02: Construction Raw Materials Policy and Supply Practices in Northwestern Europe – Facts and Figures – England, Scotland and Wales (Great Britain), British Geological Survey Commissioned Report CR/02/082N commissioned by the Road and Hydraulic Engineering Institute of the Ministry of Public Works and Water Management of the Netherlands, p. 50.
(56) See Case C-199/06 CELF [2008] ECR I-469, paragraphs 63 and 66 to 68.
(57) See Case C-199/06 CELF, cited above, paragraphs 61 and 64.
(58) Commission notice on determination of the applicable rules for the assessment of unlawful State aid, OJ C 119 of 22.5.2002, p. 22.
(59) Community guidelines on State aid for environmental protection, OJ C 37, 3.2.2001, p. 3.
(60) Community guidelines on State aid for environmental protection, OJ C 82, 1.4.2008, p. 1.
(61) Case 34/86 Council v Parliament [1986] ECR 2155, paragraph 47; Case C-415/96 Spain v Commission [1998] ECR I-6993, paragraph 31; and Case C-458/98 P Industrie des poudres sphériques v Council [2000] ECR I-8147, paragraph 82.
(62) Case C-415/96 Spain v Commission [1998] ECR I-6993, paragraph 34.
(63) Case C-364/90 Italy v Commission [1993] ECR I-2097, paragraph 20; Joined Cases T-132/96 and T-143/96 Freistaat Sachsen and Others v Commission [1999] ECR II-3663, paragraph 140.
(64) Case T-459/93 Siemens SA v Commission [1995] ECR II-1675, paragraph 48. See also Case T-396/08 Freistaat Sachsen and Land Sachsen-Anhalt v Commission, 8 July 2010, ECR 2010 II-141 paragraphs 46-48; Case C-156/98 Germany v Commission [2000] ECR I-6857, paragraph 30, with further references.
(65) Case C-364/90 Italy v Commission [1993] ECR I-2097, paragraph 20; Joined Cases T-132/96 and T-143/96 Freistaat Sachsen and Others v Commission [1999] ECR II-3663, paragraph 140.
|
28.11.2013 |
EN |
Official Journal of the European Union |
C 348/184 |
STATE AID — UNITED KINGDOM
State aid SA.34914 (2013/C) (ex 2013/NN) — Gibraltar Corporate Income Tax Regime
Invitation to submit comments pursuant to Article 108(2) of the Treaty on the Functioning of the European Union
(Text with EEA relevance)
2013/C 348/06
By means of the letter dated 16 October 2013, reproduced in the authentic language on the pages following this summary, the Commission notified the United Kingdom of its decision to initiate the procedure laid down in Article 108(2) TFEU concerning the abovementioned scheme.
Interested parties may submit their comments on the scheme in respect of which the Commission is initiating the procedure within one month of the date of publication of this summary and the following letter, to:
|
European Commission |
|
Directorate-General for Competition |
|
State aid Greffe |
|
1049 Bruxelles/Brussel |
|
BELGIQUE/BELGIË |
|
Fax No: +32 2 296 12 42 |
These comments will be communicated to the United Kingdom. Confidential treatment of the identity of the interested party submitting the comments may be requested in writing, stating the reasons for the request.
SUMMARY
On 1 June 2012, the Commission received a complaint from the Spanish authorities concerning the new income tax system in Gibraltar, as introduced by the Income Tax Act 2010 (ITA 2010). According to Spain, this new system would grant a de facto selective advantage to the offshore sector, through the combined effect of the application of the territorial system and the tax exemption for passive income.
DESCRIPTION OF THE MEASURE
The Income Tax Act 2010 (“ITA 2010”) entered into force on 1 January 2011 and replaced the former Income Tax Act 1952. The general corporate income tax rate is 10%, with a special rate of 20% for utility companies and companies that abuse a dominant market position.
For the computation of the taxable base, the ITA 2010 applies the territorial principle. This means that taxable persons are only taxed on income accrued in, or derived from Gibraltar.
Dividends, royalties and passive interest (interest income deriving from intra-group loans) are not subject to tax in Gibraltar. However, interest is subject to tax if it is considered trading income. This is the case when the interest forms an integral part of the company's revenue stream. This applies for companies engaged in money lending activities to the general public (banks) or to companies who are in receipt of interest on funds derived from deposit taking activities as defined in the Banking Act.
On 7 June 2013, the Gibraltar authorities enacted an amendment of the ITA 2010 regarding the taxation of interest. With the amendment, all inter-company loan interest, both domestic and foreign-sourced, will be subject to tax in as far as the interest received per source company exceeds an amount of £ 100,000 per annum. Such an amendment came into effect on 1 July 2013.
ASSESSMENT OF THE MEASURE
The Commission at this stage has reasons to assume that the tax exemption rule for passive interest and royalty income granted under the ITA 2010 does constitute State aid pursuant to Article 107 (1) TFEU.
The above advantages imply the use of State resources in terms of foregone tax revenues by the Gibraltar's treasury. The passive interest and royalty income exemption is selective because it constitutes a derogation from the system of reference (corporation tax), favouring a particular group of companies in receipt of such income. Such derogation is not justified by the nature and general scheme of the tax system.
There is distortion of competition and effect on trade between Member States as many companies established in Gibraltar (and the groups to which they belong) are likely to be active in sectors where there is trade between Member States.
With respect to the new law amending the ITA 2010, the new amendments seem to remove the existence of State aid with respect to the passive interest exemption. By contrast, the amendment does not affect the State aid assessment regarding the exemption of royalty income.
None of the derogations provided for in Article 107(2) and (3) apply, as the measure constitutes an operating aid not linked with the execution of specific projects and it merely reduces the beneficiaries' current expenditures without contributing to the achievement of any EU's objectives.
The aid is new aid within the meaning of Article 1(c) of Council Regulation (EC) No 659/1999.
In accordance with Article 14 of Council Regulation (EC) No 659/1999, all unlawful aid can be subject to recovery from the recipient.
TEXT OF LETTER
‘The Commission wishes to inform the United Kingdom that, having examined the information supplied by your authorities on the aid scheme referred to above, it has decided to initiate the procedure laid down in Article 108(2) of the Treaty on the Functioning of the European Union ("TFEU").
1. PROCEDURE
|
(1) |
On 1 June 2012, the Commission received a complaint from the Spanish authorities concerning the new income tax system in Gibraltar, as introduced by the Income Tax Act 2010 (ITA 2010). According to Spain, this new system would grant a de facto selective advantage to the offshore sector, constituting state aid within the meaning of Article 107(1) TFEU. |
|
(2) |
By letter of 2 July 2012, the Commission forwarded the complaint to the United Kingdom, asked for comments and requested additional information. |
|
(3) |
By letter of 14 September 2012, the United Kingdom provided detailed information on the Gibraltar reformed income tax system and its effect. A second request for information was sent on 25 October 2012 to which the United Kingdom replied on 3 December 2012. On 8 January 2013, the Commission forwarded the non-confidential versions of the submissions to Spain. By letter of 8 March 2013, the Spanish authorities provided their comments. On 8 April 2013, the Commission forwarded the reply of Spain to the United Kingdom on which the United Kingdom commented on 30 April 2013. |
|
(4) |
The United Kingdom provided further clarifications on a number of remaining issues on 18 April 2013. Spain provided clarifications on the notion of 'offshore' companies by letter of 26 April 2013. On 21 June 2013, the UK submitted further information on passive interest income and informed the Commission that the Gibraltar Government had amended the ITA 2010 with effect as of 1 July 2013. |
|
(5) |
Meetings were held with the United Kingdom (including representatives of the Gibraltar authorities) on 24 October 2012 and 12 March 2013. Several meetings were also held with the Spanish authorities. |
2. FACTS
2.1. Description of the grounds for complaint
|
(6) |
The Spanish authorities allege that the ITA 2010 constitutes State aid. They consider that the Gibraltar corporate tax system amounts to a de facto selective advantage for the offshore sector (1), through the combined effect of the application of the territorial system and the tax exemption for passive income. According to the Spanish authorities, this would lead to double non-taxation. The current tax system would have the same effect as the envisaged tax system which the Commission considered to be incompatible aid in its decision of 30 March 2004 (2), as upheld by the European Court of Justice (3). Moreover, the Spanish authorities consider the Gibraltar corporate tax system to be regionally selective, as it differs largely from the main features of the corporate tax system applied in the United Kingdom. |
2.2. Description of the Gibraltar corporate tax regime
2.2.1. Status of Gibraltar
|
(7) |
Gibraltar is a British overseas territory. It has full internal self-government with respect to tax matters, while the United Kingdom government is responsible for its international relations, for example for the negotiation of tax treaties. Though being regarded for the purposes of EU law as part of the United Kingdom, Gibraltar has a "dependent territory" status in the European Union. |
2.2.2. Income Tax Act 2010
|
(8) |
The Income Tax Act 2010 (“ITA 2010”) entered into force on 1 January 2011 and replaced the former Income Tax Act 1952. It was amended by the Income Tax (Amendment) Regulation 2013 (4) with effect from 1 July 2013. |
|
(9) |
The ITA 2010 is based on a territorial system of taxation. The general corporate income tax rate is 10 %, with a special rate of 20 % for utility companies and companies that abuse a dominant market position. |
|
(10) |
Under the ITA 2010, all companies ordinarily resident in Gibraltar or branches of companies not ordinarily resident in Gibraltar (when they carry on a trade in Gibraltar through these branches) are subject to tax for their taxable income (5). A company is ordinarily resident in Gibraltar if the management and control of its business is exercised in Gibraltar or if the company carries on a business in Gibraltar and the management and control of the business is exercised outside Gibraltar by persons ordinarily resident in Gibraltar. |
|
(11) |
For the computation of the taxable base, the ITA 2010 applies the territorial principle. In case of the ITA 2010, this means that profits or gains of a company or trust from any trade, business, profession or vocation are only taxed if the income is accrued in, or derived from Gibraltar (6). There is no capital gain tax in Gibraltar. |
|
(12) |
According to section 74 (a) of ITA 2010, income 'accrued in or derived from' is defined by reference to the location or the preponderance of the activities which give rise to the profits. In general, the location or the preponderance of the profit rising activities is determined on a case by case basis, depending on the specific facts and circumstance of the case. However, section 74 (b) provides for a legal presumption of territoriality for activities that require a licence in Gibraltar like activities performed by banks, insurance and gambling companies. Such activities are deemed to take place in Gibraltar. According to the UK, this provision has been introduced for the purpose of clarifying the territoriality principle for certain activities and to simplify the task of the Income Tax Office. However, even in the absence of section 74 (b), these activities would have been captured under the territoriality principle as a logic consequence of the legislative and administrative requirements (7) that a company needs to comply with in order to be granted a license in Gibraltar. |
|
(13) |
With respect to cross-border activities which do not require a licence, the UK authorities explained that the Commissioner in Gibraltar is bound by the criteria established by the case law of British Commonwealth countries in the application of the territorial system. The general guiding principles followed by Gibraltar would be included in two leading judgments confirmed by the House of Lords (strictly, the Judicial Committee of the Privy Council), Commissioner of Inland Revenue v Hang Seng (Hang Seng) (8) and Commissioner of Inland Revenue v HK-TVB International Ltd (HK-TVB) (9). According to these judgements, in assessing where a profit is accrued in or derived from, it needs to be considered (i) what the profit producing operations are, (ii) where they take place and (iii) what the tax payer has done to earn the profit. For example, in the last case, if the taxpayer has rendered a service, the place where the service was rendered will most probably be the place where the profits derive from. But in the case that the profits are earned by the exploitation of property, the profits will derive from the place where the property is situated. |
|
(14) |
Apart from the guiding principles established by the case law, there are no instructions, administrative circulars or guidance notes in Gibraltar on how to apply the notion of territoriality. On request, the Gibraltar tax authorities may grant tax rulings confirming the tax treatment of a particular business activity or transaction. |
|
(15) |
Irrespective of the source of the income, according to Article 11(1) in conjunction with Article 15 of Schedule 3 and Schedule 1, Table C of ITA 2010, dividends, royalties and passive interest) are not subject to tax in Gibraltar. However, interest is subject to tax if it is considered trading income ('trading interest income'). This is the case when the interest forms an integral part of the company's revenue stream. This applies to companies engaged in money lending activities to the general public (banks) or to companies that are in receipt of interest on funds derived from deposit taking activities as defined in the Banking Act (10). |
|
(16) |
The notion of passive interest income therefore covers all interest income other than trading interest income. This includes mainly inter-company loan interest (of which the exemption is a new feature of the ITA 2010) but also the other categories of interest income which were already exempt before the adoption of the ITA 2010:
|
|
(17) |
In theory, the notion of inter-company loan is broader than intra-group loan as it could also (at least in theory) include loans between unrelated companies (where the lender is not a bank or financial institution). However, in practice, loans between a (non-banking) Gibraltar company and an unrelated company would not occur. |
2.2.3. Objective of the tax system
|
(18) |
In principle, the objective of the tax system is to introduce a general system of taxation for all companies established in Gibraltar. According to the UK, the overall objective of the corporate tax system in Gibraltar is to obtain tax revenues in an efficient way and, as a small tax administration, to ensure that tax is imposed in a manner which is administratively simple and where the expected revenue can be relied on to exceed the cost of collection. |
2.2.4. Repeal of the tax exemption for passive interest income
|
(19) |
In response to the discussions on the ITA 2010 in the Code of Conduct Council Working Group on Harmful Business Taxation, which concluded that the non-taxation of foreign-source inter-company loan interest is a harmful aspect of the ITA 2010, the Gibraltar authorities have enacted an amendment of their legislation on 7 June 2013 with effect on 1 July 2013. With the amendment, all inter-company loan interest income, both domestic and foreign-sourced, will be subject to tax in as far as the interest received per source company (11) exceeds an amount of £ 100,000 per annum. According to the UK authorities this amendment will apply to approximately 99 % of all inter-company loan interest paid whilst remaining consistent with the stated objective of ensuring that the system is administratively simple. Also the reference to the 'preponderance of activities' was deleted from the law as (i) the preponderance criterion seemed to cause confusion with regard to the notion of territoriality and (ii) the outcome of the territoriality assessment would not be different without the criterion. |
3. POSITION OF UNITED KINGDOM
|
(20) |
According to the UK, the current corporate tax system in Gibraltar does not amount to a selective advantage of certain companies or sectors. It argues that the corporate tax system is based on the principle of territoriality, which is an internationally accepted tax system and the logical choice in a small jurisdiction like Gibraltar, which has no double taxation agreements with other countries. The principle would avoid double taxation and lead to simplification. The system applies to all companies and all sectors and would therefore be general in nature. The UK points out that the territorial tax system was introduced in Gibraltar already in 1952 and that the Commission, when it examined the Gibraltar corporate tax system in the past, never questioned the territoriality system as such under the state aid rules. The UK further argues that the foreign source passive interest income exception would in any event arise from the normal application of the territorial system and should therefore not be regarded as selective. Should the tax exemption for passive interest income be selective, the UK is of the opinion that it should be considered existing aid. |
|
(21) |
In more detail, the UK explain that before the ITA 2010 came into effect, the application of the territoriality principle to interest income was determined by reference to the "situs of the loan". The UK submitted that the Gibraltar Tax Commissioner had to consider the following factors (these factors are meant to implement the territorial principle for such income):
|
|
(22) |
If all four factors were in Gibraltar, then the 'situs' of the loan was in Gibraltar (and under the 1952 Act passive interest was taxable in Gibraltar). If one or more factors were outside Gibraltar the 'situs' was decided in the light of the facts. In practice the fourth factor, the location of the security of the debt, was usually the most important. According to the UK, the effect of these rules was that only intra-group financing between Gibraltar companies were taxable under the 1952 Act. |
|
(23) |
According to the UK, even in combination with the exemption for passive income, the tax system could not favor offshore companies now that these companies do no longer exist since the qualifying and exempt companies were abolished as from 24 February 2005 (12) and 1 January 2011 (13) respectively. |
4. ASSESSMENT OF THE ITA 2010
4.1. Existence of aid
|
(24) |
The ITA 2010 has been in place since 1 January 2011. The Commission at this stage has reasons to assume that some of the derogations granted under the ITA 2010 do constitute State aid pursuant to Article 107 (1) TFEU. |
|
(25) |
Article 107 (1) TFEU states that "any aid granted by a Member State or through State resources in any form whatsoever which distorts or threatens to distort competition by favouring certain undertakings or the production of certain goods shall, insofar as it affects trade between Member States, be incompatible with the internal market". |
|
(26) |
It follows that in order to be qualified as State aid, the following cumulative conditions have to be met: 1) the measure has to be granted out of State resources, 2) it has to confer an economic advantage to undertakings, 3) the advantage has to be selective and distort or threaten to distort competition, 4) the measure has to affect intra-Community trade. With respect to tax measures, selectivity is generally considered as the main criterion in applying Article 107(1) TFEU (14). The selectivity criterion has been assessed at both a material and geographical (or regional) level. |
4.1.1. Material selectivity
|
(27) |
According to settled case-law, the material selectivity of tax measures should normally be assessed by following a three step analysis (15). Firstly, the system of reference has to be identified. Secondly, it should be determined whether a given measure constitutes a derogation from this system insofar as it differentiates between economic operators who, in light of the objective intrinsic to that system, are in a comparable factual and legal situation. If the measure in question does (and therefore is prima facie selective), it still needs to be verified in the last step of the test whether the derogatory measure is justified by the nature or the general scheme of the (reference) system (16). If a prima facie selective measure is justified by the nature or the general scheme of the system, it will not be considered selective and thus fall outside the scope of Article 107(1) TFEU. |
|
(28) |
Nevertheless, it must be emphasised that Article 107(1) TFEU does not distinguish between measures of State intervention by reference to their causes or their aims, but defines them in relation to their effects and thus independently of the techniques used (17). This means that, in certain exceptional circumstances, it is not sufficient to examine whether a given measure derogates from the rules of the system of reference as defined by the Member State concerned, but it is also necessary to evaluate whether the boundaries of the system of reference have been designed in a consistent manner or, to the contrary, in a clearly and arbitrary or biased way, so as to favour certain undertakings which are in a comparable situation with regard to the underlying logic of the system in question. |
|
(29) |
In the present case, it appears that the passive income exemption measure introduced by the ITA 2010 constitutes a derogation from the system of reference. This derogation is not justified by the nature or the general scheme of the reference system. |
|
(30) |
The system of reference normally constitutes the framework against which the selectivity of a measure is assessed. It is composed of a consistent set of rules generally applicable – on the basis of objective criteria - to all undertakings falling within its scope as defined by its guiding principle. |
|
(31) |
In the case at hand, the reference tax system must be defined as the Gibraltar corporate income tax as introduced by the ITA 2010, which applies to all resident companies in Gibraltar (as well as to non-resident companies carrying on a trade in Gibraltar through a branch or agency). The guiding principle of this system would consist in levying taxes on all these undertakings generating income accruing in or derived from Gibraltar, avoiding double taxation and leading to simplification. The UK authorities point out that this system is adapted to a small jurisdiction like Gibraltar, which has no double taxation agreements with other countries. |
|
(32) |
In accordance with the above mentioned territoriality principle, only income accruing in or derived from Gibraltar is subject to taxation. However, passive income (interest, dividends or royalty) is not taxable in Gibraltar, with the exception of interest income forming an integral part of the company's revenue stream. |
|
(33) |
The above tax exemption measure applies regardless of both the source of the income and the location where the company's relevant activities take place (inside or outside Gibraltar). Given that companies are exempted from taxation on the basis of the type of income, i.e active (i.e. profits) vs. passive (interest, dividends or royalty), the exemption differentiates between certain kinds of income and must at this stage be considered prima facie selective. |
|
(34) |
In addition, the derogation in question differentiates between companies which, in light of the objective intrinsic to that system, are in a comparable factual and legal situation. Considering the objective of the Gibraltar tax system which is to tax all companies generating income accruing in or derived from Gibraltar, companies in receipt of passive interest, royalty or dividend income are in a similar legal and factual situation as other companies falling into the scope of the Gibraltar tax system. The passive income exemption therefore seems to be prima facie selective. |
|
(35) |
Moreover, the Commission at this stage considers that in particular the passive interest income exemption does not as such follow from the territorial system. In fact the passive income exemption in the ITA 2010 differs from the territorial system in place before the adoption of the ITA 2010 insofar as there was no outright exemption for passive interest, but a case-by-case assessment of the "situs" of the loan, with an inevitable margin of discretion in applying the criteria referred to in paragraph 22. Similarly, concerning the exemption of passive income derived from royalties, the Commission notes that it favours a specific group of undertakings, namely companies that obtain revenue from intellectual property rights. Such an exemption is not in line with the territoriality principle and indeed it appears that revenues derived from royalties were normally taxed under the general territoriality principle prior to the entry into force of the ITA 2010. |
|
(36) |
The UK authorities themselves state that, under the former exempt companies scheme, by obtaining an exempt status, a company would obtain absolute legal certainty that it was not subject to tax in Gibraltar, which implies that such certainty would not be available through the application of the normal rules. ITA 2010 therefore introduced a de jure derogation from the territoriality principle, by exempting from taxation all passive interests (both from domestic and foreign sources) and all revenues derived from royalties. |
|
(37) |
Selectivity can also be established in cases where the structure of the measure is such that its effects significantly favour a particular group of undertakings (de facto selectivity). In the case at hand, the passive income exemption might be found de facto selective as the measure seems to significantly favour a group of 529 companies in receipt of passive income, in particular interests from other companies of the same group or royalties for intellectual property rights. The measure therefore seems to favour a specific group of companies, namely companies providing loans to related companies or receiving royalty income for intellectual property rights. Such de facto selectivity is confirmed by the quantitative effects of the measure concerning the exemption of interest. The figures provided by the UK authorities for 2011 show that, of the total amount of inter-company loan interests received by Gibraltar companies (£ 1 400 million), the largest part (99.8 %) derives from loans granted to foreign (group) companies, in particular from non-EU countries (76 %). This seems to demonstrate that the measure would mainly benefit intra-group financing companies providing loans to foreign related companies, (18) which can be considered as a privileged group of companies. Given that Gibraltar previously exempted those companies under the former exempt companies scheme (19) (definitely repealed by the end of 2010 after being found as not state aid compliant), and further envisaged to introduce a new taxation system favouring offshore companies (20), the new passive income exemption, seen against the background of the territorial system, seems to re-establish the effect that companies providing loans to other companies of the same group, and in particular offshore companies exercising such activities, continue to benefit from zero taxation. |
|
(38) |
A measure which derogates from the system of reference (prima facie selectivity) may be still found to be non-selective if it is justified by the nature or general scheme of that system. Such is the case where a measure results directly from the intrinsic basic or guiding principles of the reference system or where it is the result of inherent mechanisms necessary for the functioning and effectiveness of that system. On the contrary, external policy objectives which are not inherent to the system cannot be relied upon for that purpose. |
|
(39) |
The exemption of domestic and foreign-source dividends would seem to be justified by the logic of preventing double taxation of such income as dividends are in principle paid out of taxable profits (either in Gibraltar or in the foreign source country). By contrast, the tax exemption for interest and royalty income does not follow any such logic. Despite the possible application of anti-abuse rules in the source country, the corresponding interest or royalty payment usually constitutes a deductible expense at the level of the paying company. |
|
(40) |
The UK authorities submit that as regards foreign source passive interest income, the non-chargeability to tax would arise from the logic of a normal application of the territorial system and should therefore not be regarded as selective. At this stage, the Commission does not find this argument convincing. Under the territoriality principle, only income of intra-group financing companies the activity of which is not preponderantly taking place in Gibraltar would fall outside the charge of taxation in Gibraltar, not the income of financing companies performing such activity in Gibraltar. Thus, the measure as enacted by the Gibraltar authorities does not correspond to the alleged logic of the system. |
|
(41) |
With respect to foreign source interest, the UK authorities have also explained that the application of the territoriality principle to interest income would be determined by reference to the "situs of the loan" (21). |
|
(42) |
The Commission notes that, while the territoriality principle as such relies on the location and preponderance of the activities performed by a Gibraltar company, the criteria allegedly applied in order to determine the "situs of the loan" do not seem to conform to the same principles. In particular, the place of residence of the debtor, the source from which the interest is paid and the nature and location of the security for the debt do not appear, in principle, to be relevant for such purposes. In any event, as indicated above, the application of the territoriality principle would need to be assessed on a case-by-case basis, without automaticity, while the passive interest exemption is automatic. |
|
(43) |
In the case of domestic source passive interest, the UK authorities have claimed that the non-chargeability to tax should be regarded either as the result of the application of the reference system or a derogation from that system which is justified by the nature and logic of all general taxation that, in accordance with normal economic rationale, the cost for collecting tax to finance public expense must not be likely to exceed the potential tax yield (estimated £ 2.5 million of domestic source interest income that would yield, at most, £ 250,000 in tax). In the Commission's view, this cost efficiency reasoning is not convincing either. If, in the absence of the measure, foreign source passive interest income was subject to the territorial principle and therefore taxable where it was derived from or accruing in Gibraltar, extending tax liability to domestic ones would not seem to involve disproportionate costs in terms of assessment and control. In addition, the UK authorities' reasoning is not based on a single consistent logic applying to both domestic and foreign source income but on two different logics. |
|
(44) |
As to the exemption for royalty income, the UK authorities have indicated that the territorial system of taxation would determine that all royalty income received by a Gibraltar company accrues and derives in Gibraltar. For the taxation of royalties to be effective, the Income Tax Office in Gibraltar would have to put in place a verification and anti-avoidance system allowing it to properly assess the amount of royalty income to be taxed. In addition, the whole area of royalties and intellectual property would be very sophisticated and issues of licensing, sublicensing, amortisation, and fair value and these would require an expertise well beyond those presently available in Gibraltar. Furthermore, and in any event, the UK authorities argue that when royalties were still taxed under the 1952 Act, it did not give rise to a significant tax yield. For this reason royalties were excluded from the heads of charge when the 2010 Act was enacted. |
|
(45) |
The Commission considers however that the requirement to make the Gibraltar tax system simple and effective cannot be seen a valid justification (based on the guiding principles of the Gibraltar tax system) for not taxing royalties. In particular, the taxation of royalties would not require a verification and anti-avoidance system more sophisticated than for other categories of income which may equally require verification and anti-avoidance rules to prevent shifting of taxable profits. On the contrary, the exemption of such royalty income would seem to require verification and anti-abuse rules, in particular to avoid the shifting of profits between Gibraltar companies. Finally, when looking at the amount of royalty income received by Gibraltar companies in 2011 (£ 90 million), the Commission doubts the UK's reasoning that the taxation of royalties would not give rise to a significant tax yield. |
|
(46) |
In conclusion, although a justification may be found for certain aspects of the tax measures concerned (e.g. the prevention of double taxation may justify the exemption of dividends), no overall logic justifying the exemption for passive interest and royalty income has been found. |
|
(47) |
It follows from the analysis of the passive income exemption that both the exemption for passive interest income and royalties appear to be de jure and de facto selective. No overall logic justifying such exemptions could so far be identified. |
4.1.2. Regional selectivity
|
(48) |
In the light of the relevant case-law, the Commission does not see any reason to assume that the system is also regionally selective. |
|
(49) |
In principle, only measures whose scope extends to the entire territory of the State escape the selectivity criterion laid down in Article 107(1) TFEU. However, as outlined below, the system of reference does not necessarily need to be defined within the limits of the Member State concerned (22). A measure favouring undertakings active in a part of the national territory should therefore not be automatically considered selective. |
|
(50) |
As established by the Court of Justice in the Azores (23) judgment and further developed in the Unión General de Trabajadores de La Rioja (24) judgment, measures with a regional or local scope of application may escape the geographical selectivity criterion if certain requirements are fulfilled. |
|
(51) |
Where a regional authority can adopt tax measures applicable within its territory, the assessment of the selective nature of the measure in question depends on whether the authority at stake is sufficiently autonomous from the central government of the Member State (25). The regional or local authority shall be considered sufficiently autonomous from the central government of the Member State if it plays a fundamental role in the definition of the political and economic environment in which the undertakings operate (26). This is the case when three cumulative criteria of autonomy are fulfilled: institutional, procedural and economic autonomy (27). If all of these criteria of autonomy are present when a regional or local authority decides to adopt a tax measure applicable only within its territory, then the geographical framework of reference is constituted by the territory of the region in question and not by that of the Member State. |
|
(52) |
In its judgment of 18 December 2008 in Joined Cases T-211/04 and T-215/04, the General Court found that Gibraltar met the three cumulative autonomy criteria established by the Azores case-law (28) (institutional, procedural and financial autonomy). Accordingly, it concluded that the reference framework corresponds exclusively to the geographical limits of the territory of Gibraltar. That finding of the General Court, although challenged by Spain in its appeal, was not reviewed by the Court of Justice. |
|
(53) |
With respect to the institutional autonomy, the General Court merely stated that the competent Gibraltar authorities which have devised the tax reform have, from a constitutional point of view, a political and administrative status separate from that of the central government of the United Kingdom and that, accordingly, the first condition is met (29). |
|
(54) |
Regarding the procedural autonomy criteria, the General Court concluded that the United Kingdom’s residual power to legislate for Gibraltar and the various powers granted to the Governor must be interpreted as means enabling the United Kingdom to assume its responsibilities towards the population of Gibraltar and to perform its obligations under international law, and not as granting an ability to intervene directly as regards the content of a tax measure adopted by the Gibraltar authorities, in particular since those residual powers have never been exercised in matters of taxation (30). |
|
(55) |
Finally, the General Court held that the financial autonomy criterion was met as Gibraltar does not receive any financial support from the United Kingdom that offsets the financial consequences of the tax reform (31). In particular, it found that the mere existence of financial transfers from the UK central government to Gibraltar is not sufficient to violate the third criterion. |
|
(56) |
As far as the Commission is aware of, Gibraltar's situation as regards the three autonomy criteria has not changed since the above referred judgment of the General Court. In the absence of any changes in its political, administrative and financial status (32), Gibraltar must be seen as a sufficiently autonomous region for the above-mentioned reasons. |
|
(57) |
In this context, the reference framework corresponds exclusively to the geographical limits of the territory of Gibraltar and so no regional selectivity can be identified on the ground that the tax regime applies to Gibraltar only. |
4.1.3. State resources
|
(58) |
The use of State resources can also follow from the loss of tax revenue. Since the non-liability to tax for companies in receipt of passive interest and royalty income results in a loss of tax revenue that otherwise would have been available to Gibraltar, it can be concluded that the scheme is financed through State resources. (33) |
4.1.4. Advantage
|
(59) |
According to the case-law, the concept of aid embraces not only positive benefits, but also measures which in various forms mitigate the charges which are normally included in the budget of an undertaking (34). |
|
(60) |
Therefore, since the tax exemption for passive interest and royalty income reduces the charges that are normally included in the operating costs of these companies incorporated in Gibraltar, it seems to provide an economic advantage to the benefitting companies in comparison to other companies which cannot benefit of such tax advantages. |
4.1.5. Effect on trade and competition
|
(61) |
Many of the companies established in Gibraltar (and the groups to which they belong) are likely to be active in sectors where there is trade between Member States. The Court of Justice has repeatedly ruled that when aid granted by the State strengthens the position of an undertaking vis-à-vis other undertakings competing in intra-Community trade, the latter must be regarded as affected by that aid. For that purpose, it is not necessary for the recipient undertaking itself to export its products. Where a Member State grants aid to an undertaking, domestic production may for that reason be maintained or increased with the result that undertakings established in other Member States have less chance of exporting their products to the market in that Member State. Similarly, where a Member State grants aid to undertakings operating in the service and distribution industries, it is not necessary for the recipient undertakings themselves to carry on their business outside the Member State for the aid to have an effect on Community trade, especially in the case of undertakings established close to the frontier between two Member States. The relatively small amount of aid, or the relatively small size of the undertaking which receives it, does not as such exclude the possibility that intra-Community trade might be affected (35). Therefore to the extent that Gibraltar companies, benefiting from the advantages described in paragraphs 16-18, operate in sectors where intra-Community trade takes place, it would appear that the aid affects trade between Member States and thereby threatens to distort competition. |
4.1.6. Conclusion on the existence of aid
|
(62) |
The Commission concludes, at this stage, that the tax exemptions for passive interest and royalty income constitute State aid within the meaning of Article 107(1) TFEU. |
4.1.7. New aid
|
(63) |
Although under the former system (1952 Act), foreign source passive interest income might not have been taxed as a result of the territoriality principle or might have benefitted from certain specific exemptions, it remains that the exemption for inter-company loan interest income from a foreign source was not granted automatically (as is the case under the 2010 Act) and required the assessment of territoriality. |
|
(64) |
The non-chargeability to tax of domestic passive interest income also constitutes a new feature of the ITA 2010 (new Article 15 of Schedule 3 of ITA 2010). Although some exemptions for such income may have been granted initially (in 1952) as a result of a policy decision, legislative amendments were introduced in 2005 with the result that inter-company loan interest was not part of the consolidated list of exempted items of interest income. In other words, the domestic inter-company loan interest income was taxed under the 2005 legislative amendment. Such interest was finally excluded from taxation by the 2010 Act (Article 15 of Schedule 3). |
|
(65) |
Furthermore, as indicated by the UK authorities, the application of the territoriality principle determines that all royalty income received by a Gibraltar company accrues in and derives from Gibraltar. Such income was only excluded from taxation by the 2010 Act. |
|
(66) |
It follows that the exemption rule for passive (inter-company loan) interest and royalty income cannot be seen as a mere continuation of the previous system but involves a substantial alteration of the tax regime for such income. In this context, the State aid which results from the exemption of inter-company loan interest and royalty income must be seen as new aid (36). |
|
(67) |
In any event, the passive interest income exemption should be considered as new aid at least insofar as it concerns those incomes that were taxable before the entry into force of the ITA 2010. |
4.1.8. Compatibility of aid
|
(68) |
As the measure appears to constitute State aid, it is therefore necessary to determine if such aid is compatible with the internal market. State aid measures can be considered compatible on the basis of the exceptions laid down in Article 107(2) and 107(3) TFEU. |
|
(69) |
So far, the Commission has doubts as to whether the measures in question can be considered compatible with the internal market. The UK authorities did not present any argument to indicate that any of the exceptions provided for in Article 107 (2) and 107 (3) TFEU, under which State aid may be considered compatible with the internal market, applies in the present case. |
|
(70) |
The exceptions provided for in Article 107 (2) TFEU, which concern aid of a social character granted to individual consumers, aid to make good the damage caused by natural disasters or exceptional occurrences and aid granted to certain areas of the Federal Republic of Germany, do not seem to apply in this case. |
|
(71) |
Nor does the exception provided for in Article 107 (3) (a) TFEU apply, which provided for the authorisation of aid to promote the economic development of areas where the standard of living is abnormally low or where there is a serious unemployment, and of the regions referred to in Article 349 TFEU, in view of their structural, economic and social situation. Such areas are defined by the UK's regional aid map (37). Since Gibraltar is not such an area, this provision does not apply. |
|
(72) |
As regards the exceptions laid in Article 107 (3) (b) and (d) TFEU, the aid in question is not intended to promote the execution of an important project of common European interest nor to remedy to a serious disturbance in the economy of the UK, nor is it intended to promote culture or heritage conservation. |
|
(73) |
Aid granted in order to facilitate the development of certain economic activities or of certain economic areas could be considered compatible where it does not adversely affect trading conditions to an extent contrary to the common interest, according to Article 107 (3) (c) TFEU. At this stage however, the Commission has no elements in order to assess whether the tax advantages granted by the measure under examination are related to specific investments eligible to receive aid under the Community rules and guidelines, to job creation or to specific projects. The Commission considers on the contrary, that the measures in issue seem to constitute a reduction of charges that should normally be borne by the entities concerned in the course of their business, and should therefore be considered as operating aid. According to the Commission practice, such aid cannot be considered compatible with the internal market in that it does not facilitate the development of certain activities or of certain economic areas, nor are the incentives in question limited in time, digressive or proportionate to what is necessary to remedy to a specific economic handicap of the areas concerned. In addition Gibraltar is not included in the regional aid map for the United Kingdom for the period 2007 to 2013, as approved by the Commission under State aid N673/2006. |
5. ASSESSMENT OF THE ITA 2013
|
(74) |
As described in paragraph (19), an amendment of the ITA 2010, which entered into force on 1 July 2013, introduces that all inter-company loan interest income received after 1 July 2013, both domestic and foreign-sourced, will be subject to tax in as far as the interest received per source company exceeds an amount of £ 100,000 per annum. |
|
(75) |
The amendment seems to remove the existence of State aid with respect to the passive (inter-company loan) interest exemption. In particular, the Commission considers that the exemption of interests received per source company not exceeding an amount of £ 100,000 per annum can be regarded as a legitimate simplification measure, as confirmed by the figures provided by the United Kingdom, according to which approximately 99 % of all inter-company loan interest paid would now be subject to taxation. On the contrary, the amendment does not affect the assessment of material selectivity regarding the exemption of royalty income. |
|
(76) |
The other criteria for the assessment of the existence of aid are not affected by the July 2013 amendment either. Against this background, the Commission concludes, at this stage, that the exemption rule for passive (inter-company loan) interest constitutes State aid only with respect to the application of the rule before the entry into force of the amendment enacted by the Income Tax (Amendment) Act of 7 June 2013. By contrast, the royalty exemption still constitutes State aid within the meaning of Article 107(1) TFEU. |
|
(77) |
The findings on compatibility laid down in paragraph (69) to (74) apply equally to the 2013 amended tax system. |
6. CONCLUSION
In the light of the foregoing considerations, the Commission’s preliminary view is that the exemption rule for passive (inter-company loan) interest and royalty income resulting from ITA 2010 constitutes a State aid measure according to Article 107(1) TFEU and has doubts about it compatibility with the internal market. The Commission has therefore decided to initiate the procedure laid down in Article 108(2) TFEU with respect to the measures in question. As far as the exemption relates to royalty income, the Commission takes the same view and the same Decision concerning the Income Tax Act 2010 as amended by the Income Tax Regulation 2013.
The Commission wishes to remind the United Kingdom that Article 108 (3) TFEU has suspensory effect, and would draw your attention to Article 14 of Council Regulation (EC) No. 659/1999, which provides that all unlawful aid may be recovered from the recipient.
The Commission invites the UK authorities to transmit immediately copy of the present decision to all (potential) beneficiaries of the aid, or at least to proceed to inform them with appropriate means.
The Commission informs the United Kingdom that it will inform interested parties by publishing this letter and a meaningful summary of it in the Official Journal of the European Union. It will also inform interested parties in the EFTA countries which are signatories to the EEA Agreement, by publication of a notice in the EEA Supplement to the Official Journal of the European Union and will inform the EFTA Surveillance Authority by sending a copy of this letter. All such interested parties will be invited to submit their comments within one month of the date of such publication.’
(1) Offshore companies are defined by Spain as companies which are not engaged in any activity or trade in Gibraltar (no income generated in Gibraltar), are not resident in Gibraltar, have practically no economic substance (employees, material means) and all or most of their income is passive income (dividends, interests and royalties) originating outside Gibraltar.
(3) Joined Cases C-106/09 P and C-107/09 P, Commission and Spain v Government of Gibraltar and United Kingdom [2011].
(4) Second supplement to the Gibraltar Gazette, No.4006 of 6 June, 2013.
(5) Other taxable persons are unincorporated associations, trusts, individuals trading in partnership or individuals.
(6) See section 11, paragraph (1) of Part II and table A of Schedule 1, ITA 2010.
(7) For example, the standard agreement for the granting of gambling licence requires that the operation, management and control of the entire licensed business shall be exercised from Gibraltar and that the core telecommunications services/equipment for the provision of the gambling activities must be situated in Gibraltar. The failure to maintain a physical presence in Gibraltar is a ground for not renewing a licence.
(8) CIR v Hang Seng Bank Limited [1991] 1 AC 306.
(9) CIR v HK-TVB International Limited [1992] 3 WLR 439.
(10) See section 15 of part III of schedule 3, ITA 2010.
(11) Interest received from different companies will be considered to be from the same source company if the different companies are connected persons.
(12) State Aid C52/2001 – United Kingdom, Gibraltar Qualifying Companies, Decision of 30 March 2004, C(2004) 928), OJ L 29, 2.2.2004, p. 24. See also Income Tax (Amendment) Ordinance 2005, No. 3457 of 24 February 2005.
(13) State Aid E 7/2002 (ex C53/2001 & NN52/2000) – United Kingdom, Proposal for appropriate measures under Article 88(1) of the EC Treaty concerning Gibraltar exempt companies, C(2004)2687.
(14) See Commission Notice on the Application of the State Aid Rules to Measures relating to Direct Business Taxation, OJ C 384, 10.12.1998, p.3.
(15) See e.g. Joined Cases C-78/08 to C-80/08, Paint Graphos and others [2011], paragraph 49 et seq.
(16) See e.g. Case C-279/08 P, Commission v Netherlands (NOx) [2011], paragraph 62, Case T-210/02 RENV, British Aggregates Association v Commission [2012], paragraph 83, Joined Cases C-78/08 to C-80/08, Paint Graphos and others [2011], paragraph 69 et seq. Sometimes the Court refers also to justification by “the logic of the system”, see e.g. Case C-53/00, Ferring, [2001] ECR I-9067, paragraph 17.
(17) See case C-487/06 P, British Aggregates v Commission, [2008] ECR I-10515, paragraphs 85 and 89 and the case-law cited; Case C-279/08 P Commission v Netherlands [2011], paragraphs 51; Joined Cases C-106/09 P and C-107/09 P, Commission and Spain v Government of Gibraltar and United Kingdom [2011], paragraph 87.
(18) With respect to the number of benefitting companies, the UK authorities have explained that of the total amount of passive interest income (£ 1 400 million), £ 1 381 million arose from 137 companies with the balance of £ 18.34 million spread over a further 400 companies. Within the grouping of 137 companies, there was a single company that accounted for £ 1 000 million in interest.
(19) Exempt companies were essentially companies that did not carry out any trade or business in Gibraltar and were not owned by Gibraltar residents. These companies were exempt from corporate tax. In 2001 the Commission initiated proceedings under the state aid rules in respect of a specific tax regime put in place for such companies, which regime was considered to favour the offshore sector. As a result, Gibraltar definitively abolished this scheme by the end of 2010 and today there are no exempt companies in Gibraltar anymore.
(20) See Joined Cases C-106/09 P and C-107/09 P, Commission and Spain v Government of Gibraltar and United Kingdom [2011].
(21) See above, paragraphs 22 and 23.
(22) Case C-88/03 Portugal v Commission [2006] ECR I-7115, paragraph 57, Joined Cases C-428/06 to C-434/06 Unión General de Trabajadores de La Rioja, [2008] ECR I-6747, paragraph 47.
(23) Case C-88/03 Portugal v Commission [2006] ECR I-7115 [2006] ECR I-7115, paragraphs 57 et seq.
(24) Cases C-428/06 to C-434/06 Unión General de Trabajadores de La Rioja [2008] ECR I-6747, paragraphs 47 et seq.
(25) Case C-88/03 Portugal v Commission [2006] ECR I-7115, paragraph 58: "it is possible that an infra-state enjoys legal and factual status which makes it sufficiently autonomous in relation to the central government of a Member State, with the result that, by the measures it adopts, it is that body and not the central government which plays a fundamental role in the definition of the political and economic environment in which undertakings operate."
(26) Joined cases C-428/06 to C-434/06 Unión General de Trabajadores de La Rioja [2008] ECR I-6747, paragraph 55.
(27) Case C-88/03 Portugal v Commission [2006] ECR I-7115, paragraph 67.
(28) C-88/03 Portugal v Commission.
(29) See Joined cases T-211/04 and T-215/04, paragraph 89.
(30) See paragraphs 90-99.
(31) See paragraphs 101-113.
(32) The UK has confirmed that Gibraltar receives no subsidy or financing of any kind from the UK. Gibraltar raises all its revenue from its own taxation.
(33) Joined Cases C-106/09 P and C-107/09 P, Commission and Spain v Government of Gibraltar and United Kingdom [2011], paragraph 72.
(34) Case C-143/99, Adria-Wien Pipeline, ECR 2001, I-8365, point 38.
(35) See cases 730/79 Philip Morris v Commission [1980] ECR 2671, 142/87, Belgium v Commission [1990] ECR I-959, joined cases C-278/92, C-279/92 and C-280/92 Spain v Commission [1994] ECR I-4103, paragraphs 40-42 and case C-310/99 Italy v Commission [2002] ECR I-2289, paragraphs 84-86.
(36) Joined Cases T-195/01 and T-207/11, Governement of Gibraltar v Commission, para. 111
(37) OJ C 55, 10.03.2007, p. 2.