ISSN 1725-2423 doi:10.3000/17252423.C_2010.284.eng |
||
Official Journal of the European Union |
C 284 |
|
![]() |
||
English edition |
Information and Notices |
Volume 53 |
|
|
|
(1) Text with EEA relevance |
EN |
|
IV Notices
NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES
European Commission
20.10.2010 |
EN |
Official Journal of the European Union |
C 284/1 |
Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
(Text with EEA relevance)
(Publication of titles and references of harmonised standards under the directive)
2010/C 284/01
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
CEN |
EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts — Part 3: Electric and hydraulic service lifts |
8.9.2009 |
|
|
EN 81-3:2000+A1:2008/AC:2009 |
|
|
|
|
CEN |
EN 81-31:2010 Safety rules for the construction and installation of lifts — Lifts for the transport of goods only — Part 31: Accessible goods only lifts |
This is the first publication |
|
|
CEN |
EN 81-40:2008 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
8.9.2009 |
|
|
CEN |
EN 81-43:2009 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 43: Lifts for cranes |
8.9.2009 |
|
|
CEN |
EN 115-1:2008+A1:2010 Safety of escalators and moving walks — Part 1: Construction and installation |
26.5.2010 |
EN 115-1:2008 Note 2.1 |
Date expired (30.9.2010) |
CEN |
EN 201:2009 Plastics and rubber machines — Injection moulding machines — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 267:2009 Automatic forced draught burners for liquid fuels |
26.5.2010 |
|
|
CEN |
EN 280:2001+A2:2009 Mobile elevating work platforms — Design calculations — Stability criteria — Construction — Safety — Examinations and tests |
18.12.2009 |
|
|
CEN |
EN 289:2004+A1:2008 Plastics and rubber machines — Presses — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 349:1993+A1:2008 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
8.9.2009 |
|
|
CEN |
EN 378-2:2008+A1:2009 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation |
8.9.2009 |
|
|
CEN |
EN 415-1:2000+A1:2009 Packaging machines safety — Part 1: Terminology and classification of packaging machines and associated equipment |
8.9.2009 |
|
|
CEN |
EN 415-3:1999+A1:2009 Safety of packaging machines — Part 3: Form, fill and seal machines |
18.12.2009 |
|
|
CEN |
EN 415-5:2006+A1:2009 Safety of packaging machines — Part 5: Wrapping machines |
18.12.2009 |
|
|
CEN |
EN 415-6:2006+A1:2009 Safety of packaging machines — Part 6: Pallet wrapping machines |
18.12.2009 |
|
|
CEN |
EN 415-7:2006+A1:2008 Safety of packaging machines — Part 7: Group and secondary packaging machines |
8.9.2009 |
|
|
CEN |
EN 415-8:2008 Safety of packaging machines — Part 8: Strapping machines |
8.9.2009 |
|
|
CEN |
EN 415-9:2009 Safety of packaging machines — Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
18.12.2009 |
|
|
CEN |
EN 422:2009 Plastics and rubber machines — Blow moulding machines — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 453:2000+A1:2009 Food processing machinery — Dough mixers — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 454:2000+A1:2009 Food processing machinery — Planetary mixers — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 474-1:2006+A1:2009 Earth-moving machinery — Safety — Part 1: General requirements |
8.9.2009 |
|
|
CEN |
EN 474-2:2006+A1:2008 Earth-moving machinery — Safety — Part 2: Requirements for tractor-dozers |
8.9.2009 |
|
|
CEN |
EN 474-3:2006+A1:2009 Earth-moving machinery — Safety — Part 3: Requirements for loaders |
8.9.2009 |
|
|
CEN |
EN 474-6:2006+A1:2009 Earth-moving machinery — Safety — Part 6: Requirements for dumpers |
8.9.2009 |
|
|
CEN |
EN 474-7:2006+A1:2009 Earth-moving machinery — Safety — Part 7: Requirements for scrapers |
8.9.2009 |
|
|
CEN |
EN 474-8:2006+A1:2009 Earth-moving machinery — Safety — Part 8: Requirements for graders |
8.9.2009 |
|
|
CEN |
EN 474-9:2006+A1:2009 Earth-moving machinery — Safety — Part 9: Requirements for pipelayers |
8.9.2009 |
|
|
CEN |
EN 474-10:2006+A1:2009 Earth-moving machinery — Safety — Part 10: Requirements for trenchers |
8.9.2009 |
|
|
CEN |
EN 474-11:2006+A1:2008 Earth-moving machinery — Safety — Part 11: Requirements for earth and landfill compactors |
8.9.2009 |
|
|
CEN |
EN 474-12:2006+A1:2008 Earth-moving machinery — Safety — Part 12: Requirements for cable excavators |
8.9.2009 |
|
|
CEN |
EN 500-1:2006+A1:2009 Mobile road construction machinery — Safety — Part 1: Common requirements |
26.5.2010 |
|
|
CEN |
EN 500-2:2006+A1:2008 Mobile road construction machinery — Safety — Part 2: Specific requirements for road-milling machines |
8.9.2009 |
|
|
CEN |
EN 500-3:2006+A1:2008 Mobile road construction machinery — Safety — Part 3: Specific requirements for soil-stabilising machines and recycling machines |
8.9.2009 |
|
|
CEN |
EN 500-6:2006+A1:2008 Mobile road construction machinery — Safety — Part 6: Specific requirements for paver-finishers |
8.9.2009 |
|
|
CEN |
EN 528:2008 Rail dependent storage and retrieval equipment — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 547-1:1996+A1:2008 Safety of machinery — Human body measurements — Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
8.9.2009 |
|
|
CEN |
EN 547-2:1996+A1:2008 Safety of machinery — Human body measurements — Part 2: Principles for determining the dimensions required for access openings |
8.9.2009 |
|
|
CEN |
EN 547-3:1996+A1:2008 Safety of machinery — Human body measurements — Part 3: Anthropometric data |
8.9.2009 |
|
|
CEN |
EN 574:1996+A1:2008 Safety of machinery — Two-hand control devices — Functional aspects — Principles for design |
8.9.2009 |
|
|
CEN |
EN 609-1:1999+A2:2009 Agricultural and forestry machinery — Safety of log splitters — Part 1: Wedge splitters |
18.12.2009 |
|
|
CEN |
EN 609-2:1999+A1:2009 Agricultural and forestry machinery — Safety of log splitters — Part 2: Screw splitters |
18.12.2009 |
|
|
CEN |
EN 614-1:2006+A1:2009 Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles |
8.9.2009 |
|
|
CEN |
EN 614-2:2000+A1:2008 Safety of machinery — Ergonomic design principles — Part 2: Interactions between the design of machinery and work tasks |
8.9.2009 |
|
|
CEN |
EN 626-1:1994+A1:2008 Safety of machinery — Reduction of risks to health from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers |
8.9.2009 |
|
|
CEN |
EN 626-2:1996+A1:2008 Safety of machinery — Reduction of risk to health from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures |
8.9.2009 |
|
|
CEN |
EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels |
8.9.2009 |
|
|
EN 676:2003+A2:2008/AC:2008 |
|
|
|
|
CEN |
EN 690:1994+A1:2009 Agricultural machinery — Manure spreaders — Safety |
18.12.2009 |
|
|
CEN |
EN 692:2005+A1:2009 Machine tools — Mechanical presses — Safety |
8.9.2009 |
|
|
CEN |
EN 693:2001+A1:2009 Machine tools — Safety — Hydraulic presses |
8.9.2009 |
|
|
CEN |
EN 703:2004+A1:2009 Agricultural machinery — Silage loading, mixing and/or chopping and distributing machines — Safety |
18.12.2009 |
|
|
CEN |
EN 704:1999+A1:2009 Agricultural machinery — Pick-up balers — Safety |
18.12.2009 |
|
|
CEN |
EN 706:1996+A1:2009 Agricultural machinery — Vine shoot tipping machines — Safety |
18.12.2009 |
|
|
CEN |
EN 707:1999+A1:2009 Agricultural machinery — Slurry tankers — Safety |
18.12.2009 |
|
|
CEN |
EN 709:1997+A4:2009 Agricultural and forestry machinery — Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) — Safety |
26.5.2010 |
EN 709:1997+A2:2009 Note 2.1 |
31.12.2010 |
CEN |
EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment |
This is the first publication |
|
|
CEN |
EN 745:1999+A1:2009 Agricultural machinery — Rotary mowers and flail-mowers — Safety |
18.12.2009 |
|
|
CEN |
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment — Part 1: Common safety requirements for industrial thermoprocessing equipment |
18.12.2009 |
|
|
CEN |
EN 746-2:2010 Industrial thermoprocessing equipment — Part 2: Safety requirements for combustion and fuel handling systems |
This is the first publication |
|
|
CEN |
EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment — Part 3: Safety requirements for the generation and use of atmosphere gases |
8.9.2009 |
|
|
CEN |
EN 786:1996+A2:2009 Garden equipment — Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety |
18.12.2009 |
|
|
CEN |
EN 791:1995+A1:2009 Drill rigs — Safety |
8.9.2009 |
|
|
CEN |
EN 792-1:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for non-threaded mechanical fasteners |
8.9.2009 |
|
|
CEN |
EN 792-2:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and crimping power tools |
8.9.2009 |
|
|
CEN |
EN 792-3:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers |
8.9.2009 |
|
|
CEN |
EN 792-4:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools |
8.9.2009 |
|
|
CEN |
EN 792-5:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 5: Rotary percussive drills |
8.9.2009 |
|
|
CEN |
EN 792-6:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners |
8.9.2009 |
|
|
CEN |
EN 792-7:2001+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 7: Grinders |
8.9.2009 |
|
|
CEN |
EN 792-8:2001+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and polishers |
8.9.2009 |
|
|
CEN |
EN 792-9:2001+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 9: Die grinders |
8.9.2009 |
|
|
CEN |
EN 792-10:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 10: Compression power tools |
8.9.2009 |
|
|
CEN |
EN 792-11:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and shears |
8.9.2009 |
|
|
CEN |
EN 792-12:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 12: Small circular, small oscillating and reciprocating saws |
8.9.2009 |
|
|
CEN |
EN 792-13:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools |
8.9.2009 |
|
|
CEN |
EN 809:1998+A1:2009 Pumps and pump units for liquids — Common safety requirements |
18.12.2009 |
|
|
CEN |
EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 818-1:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 1: General conditions of acceptance |
8.9.2009 |
|
|
CEN |
EN 818-2:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 2: Medium tolerance chain for chain slings — Grade 8 |
8.9.2009 |
|
|
CEN |
EN 818-3:1999+A1:2008 Short link chain for lifting purposes — Safety — Part 3: Medium tolerance chain for chain slings — Grade 4 |
8.9.2009 |
|
|
CEN |
EN 818-4:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 4: Chain slings — Grade 8 |
8.9.2009 |
|
|
CEN |
EN 818-5:1999+A1:2008 Short link chain for lifting purposes — Safety — Part 5: Chain slings — Grade 4 |
8.9.2009 |
|
|
CEN |
EN 818-6:2000+A1:2008 Short link chain for lifting purposes — Safety — Part 6: Chain slings — Specification for information for use and maintenance to be provided by the manufacturer |
8.9.2009 |
|
|
CEN |
EN 818-7:2002+A1:2008 Short link chain for lifting purposes — Safety — Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
8.9.2009 |
|
|
CEN |
EN 842:1996+A1:2008 Safety of machinery — Visual danger signals — General requirements, design and testing |
8.9.2009 |
|
|
CEN |
EN 848-1:2007+A1:2009 Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines |
18.12.2009 |
|
|
CEN |
EN 848-2:2007+A1:2009 Safety of woodworking machines — One side moulding machines with rotating tool — Part 2: Single spindle hand fed/integrated fed routing machines |
18.12.2009 |
|
|
CEN |
EN 848-3:2007+A2:2009 Safety of woodworking machines — One side moulding machines with rotating tools — Part 3: Numerically controlled (NC) boring and routing machines |
18.12.2009 |
|
|
CEN |
EN 859:2007+A1:2009 Safety of woodworking machines — Hand fed surface planing machines |
26.5.2010 |
|
|
CEN |
EN 860:2007+A1:2009 Safety of woodworking machines — One side thickness planing machines |
18.12.2009 |
|
|
CEN |
EN 861:2007+A1:2009 Safety of woodworking machines — Surface planing and thicknessing machines |
18.12.2009 |
|
|
CEN |
EN 869:2006+A1:2009 Safety of machinery — Safety requirements for pressure metal diecasting units |
8.9.2009 |
|
|
CEN |
EN 894-1:1997+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators |
8.9.2009 |
|
|
CEN |
EN 894-2:1997+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays |
8.9.2009 |
|
|
CEN |
EN 894-3:2000+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators |
8.9.2009 |
|
|
CEN |
EN 894-4:2010 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 4: Location and arrangement of displays and control actuators |
This is the first publication |
|
|
CEN |
EN 908:1999+A1:2009 Agricultural and forestry machinery — Reel machines for irrigation — Safety |
18.12.2009 |
|
|
CEN |
EN 909:1998+A1:2009 Agricultural and forestry machinery — Centre pivot and moving lateral types irrigation machines — Safety |
18.12.2009 |
|
|
CEN |
EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines — Roughing, scouring, polishing and trimming machines — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 931:1997+A2:2009 Footwear manufacturing machines — Lasting machines — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 940:2009 Safety of woodworking machines — Combined woodworking machines |
18.12.2009 |
|
|
CEN |
EN 953:1997+A1:2009 Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards |
8.9.2009 |
|
|
CEN |
EN 981:1996+A1:2008 Safety of machinery — System of auditory and visual danger and information signals |
8.9.2009 |
|
|
CEN |
EN 982:1996+A1:2008 Safety of machinery — Safety requirements for fluid power systems and their components — Hydraulics |
8.9.2009 |
|
|
CEN |
EN 983:1996+A1:2008 Safety of machinery — Safety requirements for fluid power systems and their components — Pneumatics |
8.9.2009 |
|
|
CEN |
EN 996:1995+A3:2009 Piling equipment — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 1005-1:2001+A1:2008 Safety of machinery — Human physical performance — Part 1: Terms and definitions |
8.9.2009 |
|
|
CEN |
EN 1005-2:2003+A1:2008 Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and component parts of machinery |
8.9.2009 |
|
|
CEN |
EN 1005-3:2002+A1:2008 Safety of machinery — Human physical performance — Part 3: Recommended force limits for machinery operation |
8.9.2009 |
|
|
CEN |
EN 1005-4:2005+A1:2008 Safety of machinery — Human physical performance — Part 4: Evaluation of working postures and movements in relation to machinery |
8.9.2009 |
|
|
CEN |
EN 1010-3:2002+A1:2009 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 3: Cutting machines |
18.12.2009 |
|
|
CEN |
EN 1010-4:2004+A1:2009 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 4: Bookbinding, paper converting and finishing machines |
18.12.2009 |
|
|
CEN |
EN 1012-2:1996+A1:2009 Compressors and vacuum pumps — Safety requirements — Part 2: Vacuum pumps |
18.12.2009 |
|
|
CEN |
EN 1028-1:2002+A1:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 1: Classification — General and safety requirements |
8.9.2009 |
|
|
CEN |
EN 1028-2:2002+A1:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 2: Verification of general and safety requirements |
8.9.2009 |
|
|
CEN |
EN 1032:2003+A1:2008 Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value |
8.9.2009 |
|
|
CEN |
EN 1034-1:2000+A1:2010 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 1: Common requirements |
26.5.2010 |
|
|
CEN |
EN 1034-2:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 2: Barking drums |
26.5.2010 |
|
|
CEN |
EN 1034-3:1999+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 3: Winders and slitters, plying machines |
26.5.2010 |
|
|
CEN |
EN 1034-4:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 4: Pulpers and their loading facilities |
26.5.2010 |
|
|
CEN |
EN 1034-5:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 5: Sheeters |
26.5.2010 |
|
|
CEN |
EN 1034-6:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 6: Calender |
26.5.2010 |
|
|
CEN |
EN 1034-7:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 7: Chests |
26.5.2010 |
|
|
CEN |
EN 1034-13:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 13: Machines for de-wiring bales and units |
26.5.2010 |
|
|
CEN |
EN 1034-14:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 14: Reel splitter |
26.5.2010 |
|
|
CEN |
EN 1034-22:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 22: Wood Grinders |
26.5.2010 |
|
|
CEN |
EN 1037:1995+A1:2008 Safety of machinery — Prevention of unexpected start-up |
8.9.2009 |
|
|
CEN |
EN 1088:1995+A2:2008 Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
8.9.2009 |
|
|
CEN |
EN 1093-1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods |
8.9.2009 |
|
|
CEN |
EN 1093-2:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant |
8.9.2009 |
|
|
CEN |
EN 1093-3:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
8.9.2009 |
|
|
CEN |
EN 1093-4:1996+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 4: Capture efficiency of an exhaust system — Tracer method |
8.9.2009 |
|
|
CEN |
EN 1093-6:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 6: Separation efficiency by mass, unducted outlet |
8.9.2009 |
|
|
CEN |
EN 1093-7:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 7: Separation efficiency by mass, ducted outlet |
8.9.2009 |
|
|
CEN |
EN 1093-8:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Pollutant concentration parameter, test bench method |
8.9.2009 |
|
|
CEN |
EN 1093-9:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 9: Pollutant concentration parameter, room method |
8.9.2009 |
|
|
CEN |
EN 1093-11:2001+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 11: Decontamination index |
8.9.2009 |
|
|
CEN |
EN 1114-3:2001+A1:2008 Plastics and rubber machines — Extruders and extrusion lines — Part 3: Safety requirements for haul-offs |
8.9.2009 |
|
|
CEN |
EN 1127-1:2007 Explosive atmospheres — Explosion prevention and protection — Part 1: Basic concepts and methodology |
18.12.2009 |
|
|
CEN |
EN 1127-2:2002+A1:2008 Explosive atmospheres — Explosion prevention and protection — Part 2: Basic concepts and methodology for mining |
8.9.2009 |
|
|
CEN |
EN 1218-1:1999+A1:2009 Safety of woodworking machines — Tenoning machines — Part 1: Single end tenoning machines with sliding table |
18.12.2009 |
|
|
CEN |
EN 1218-2:2004+A1:2009 Safety of woodworking machines — Tenoning machines — Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
8.9.2009 |
|
|
CEN |
EN 1218-3:2001+A1:2009 Safety of woodworking machines — Tenoning machines — Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers |
8.9.2009 |
|
|
CEN |
EN 1218-4:2004+A2:2009 Safety of woodworking machines — Tenoning machines — Part 4: Edge banding machines fed by chain(s) |
8.9.2009 |
|
|
CEN |
EN 1218-5:2004+A1:2009 Safety of woodworking machines — Tenoning machines — Part 5: One side profiling machines with fixed table and feed rollers or feed chain |
18.12.2009 |
|
|
CEN |
EN 1248:2001+A1:2009 Foundry machinery — Safety requirements for abrasive blasting equipment |
8.9.2009 |
|
|
CEN |
EN 1265:1999+A1:2008 Safety of machinery — Noise test code for foundry machines and equipment |
8.9.2009 |
|
|
CEN |
EN 1299:1997+A1:2008 Mechanical vibration and shock — Vibration isolation of machines — Information for the application of source isolation |
8.9.2009 |
|
|
CEN |
EN 1374:2000+A1:2010 Agricultural machinery — Silos stationary unloaders for round silos — Safety |
This is the first publication |
|
|
CEN |
EN 1398:2009 Dock levellers — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 1417:1996+A1:2008 Plastics and rubber machines — Two roll mills — Safety requirements |
8.9.2009 |
|
|
EN 1417:1996+A1:2008/AC:2009 |
|
|
|
|
CEN |
EN 1492-1:2000+A1:2008 Textile slings — Safety — Part 1: Flat woven webbing slings made of man-made fibres for general purpose use |
8.9.2009 |
|
|
CEN |
EN 1492-2:2000+A1:2008 Textile slings — Safety — Part 2: Roundslings made of man-made fibres for general purpose use |
8.9.2009 |
|
|
CEN |
EN 1492-4:2004+A1:2008 Textile slings — Safety — Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
8.9.2009 |
|
|
CEN |
EN 1493:1998+A1:2008 Vehicle lifts |
8.9.2009 |
|
|
CEN |
EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment |
8.9.2009 |
|
|
CEN |
EN 1495:1997+A2:2009 Lifting platforms — Mast climbing work platforms |
18.12.2009 |
|
|
EN 1495:1997+A2:2009/AC:2010 |
|
|
|
|
Warning: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC. |
||||
CEN |
EN 1501-1:1998+A2:2009 Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 1: Rear-end loaded refuse collection vehicles |
29.12.2009 |
|
|
CEN |
EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices — General requirements and safety requirements — Part 2: Side loaded refuse collection vehicles |
29.12.2009 |
|
|
CEN |
EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 3: Front loaded refuse collection vehicles |
8.9.2009 |
|
|
CEN |
EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 4: Noise test code for refuse collection vehicles |
8.9.2009 |
|
|
CEN |
EN 1526:1997+A1:2008 Safety of industrial trucks — Additional requirements for automated functions on trucks |
8.9.2009 |
|
|
CEN |
EN 1539:2009 Dryers and ovens, in which flammable substances are released — Safety requirements |
26.5.2010 |
|
|
CEN |
EN 1547:2001+A1:2009 Industrial thermoprocessing equipment — Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
8.9.2009 |
|
|
CEN |
EN 1550:1997+A1:2008 Machine-tools safety — Safety requirements for the design and construction of work holding chucks |
8.9.2009 |
|
|
CEN |
EN 1570:1998+A2:2009 Safety requirements for lifting tables |
18.12.2009 |
|
|
CEN |
EN 1612-1:1997+A1:2008 Plastics and rubber machines — Reaction moulding machines — Part 1: Safety requirements for metering and mixing units |
8.9.2009 |
|
|
CEN |
EN 1672-2:2005+A1:2009 Food processing machinery — Basic concepts — Part 2: Hygiene requirements |
8.9.2009 |
|
|
CEN |
EN 1673:2000+A1:2009 Food processing machinery — Rotary rack ovens — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 1674:2000+A1:2009 Food processing machinery — Dough and pastry brakes — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 1677-1:2000+A1:2008 Components for slings — Safety — Part 1: Forged steel components, Grade 8 |
8.9.2009 |
|
|
CEN |
EN 1677-2:2000+A1:2008 Components for slings — Safety — Part 2: Forged steel lifting hooks with latch, Grade 8 |
8.9.2009 |
|
|
CEN |
EN 1677-3:2001+A1:2008 Components for slings — Safety — Part 3: Forged steel self-locking hooks — Grade 8 |
8.9.2009 |
|
|
CEN |
EN 1677-4:2000+A1:2008 Components for slings — Safety — Part 4: Links, Grade 8 |
8.9.2009 |
|
|
CEN |
EN 1677-5:2001+A1:2008 Components for slings — Safety — Part 5: Forged steel lifting hooks with latch — Grade 4 |
8.9.2009 |
|
|
CEN |
EN 1677-6:2001+A1:2008 Components for slings — Safety — Part 6: Links — Grade 4 |
8.9.2009 |
|
|
CEN |
EN 1678:1998+A1:2010 Food processing machinery — Vegetable cutting machines — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines |
8.9.2009 |
|
|
CEN |
EN 1755:2000+A1:2009 Safety of industrial trucks — Operation in potentially explosive atmospheres — Use in flammable gas, vapour, mist and dust |
8.9.2009 |
|
|
CEN |
EN 1756-1:2001+A1:2008 Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 1: Tail lifts for goods |
8.9.2009 |
|
|
CEN |
EN 1756-2:2004+A1:2009 Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 2: Tail lifts for passengers |
18.12.2009 |
|
|
CEN |
EN 1760-1:1997+A1:2009 Safety of machinery — Pressure sensitive protective devices — Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
8.9.2009 |
|
|
CEN |
EN 1760-2:2001+A1:2009 Safety of machinery — Pressure sensitive protective devices — Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
8.9.2009 |
|
|
CEN |
EN 1760-3:2004+A1:2009 Safety of machinery — Pressure sensitive protective devices — Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
8.9.2009 |
|
|
CEN |
EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services — Safety requirements and testing |
26.5.2010 |
EN 1777:2004+A1:2009 Note 2.1 |
Date expired (30.9.2010) |
CEN |
EN 1804-1:2001+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 1: Support units and general requirements |
26.5.2010 |
|
|
CEN |
EN 1804-2:2001+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 2: Powerset legs and rams |
26.5.2010 |
|
|
CEN |
EN 1804-3:2006+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 3: Hydraulic control systems |
26.5.2010 |
|
|
CEN |
EN 1807:1999+A1:2009 Safety of woodworking machines — Band sawing machines |
18.12.2009 |
|
|
CEN |
EN 1808:1999+A1:2010 Safety requirements on Suspended Access Equipment — Design calculations, stability criteria, construction — Tests |
This is the first publication |
|
|
CEN |
EN 1829-1:2010 High pressure water jet machines — Safety requirements — Part 1: Machines |
26.5.2010 |
|
|
CEN |
EN 1829-2:2008 High-pressure water jet machines — Safety requirements — Part 2: Hoses, hose lines and connectors |
8.9.2009 |
|
|
CEN |
EN 1837:1999+A1:2009 Safety of machinery — Integral lighting of machines |
18.12.2009 |
|
|
CEN |
EN 1845:2007 Footwear manufacturing machines — Footwear moulding machines — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 1846-2:2009 Firefighting and rescue service vehicles — Part 2: Common requirements — Safety and performance |
18.12.2009 |
EN 1846-2:2001+A3:2009 Note 2.1 |
28.2.2011 |
CEN |
EN 1846-3:2002+A1:2008 Firefighting and rescue service vehicles — Part 3: Permanently installed equipment — Safety and performance |
8.9.2009 |
|
|
CEN |
EN 1853:1999+A1:2009 Agricultural machinery — Trailers with tipping body — Safety |
18.12.2009 |
|
|
CEN |
EN 1870-1:2007+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws |
8.9.2009 |
|
|
CEN |
EN 1870-3:2001+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
8.9.2009 |
|
|
CEN |
EN 1870-4:2001+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
18.12.2009 |
|
|
CEN |
EN 1870-5:2002+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 5: Circular sawbenches/up-cutting cross-cut sawing machines |
18.12.2009 |
|
|
CEN |
EN 1870-6:2002+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading |
18.12.2009 |
|
|
CEN |
EN 1870-7:2002+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
18.12.2009 |
|
|
CEN |
EN 1870-8:2001+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
18.12.2009 |
|
|
CEN |
EN 1870-9:2000+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
18.12.2009 |
|
|
CEN |
EN 1870-10:2003+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
18.12.2009 |
|
|
CEN |
EN 1870-11:2003+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
18.12.2009 |
|
|
CEN |
EN 1870-12:2003+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 12: Pendulum cross-cut sawing machines |
18.12.2009 |
|
|
CEN |
EN 1870-13:2007+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 13: Horizontal beam panel sawing machines |
18.12.2009 |
|
|
CEN |
EN 1870-14:2007+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines |
18.12.2009 |
|
|
CEN |
EN 1870-15:2004+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
18.12.2009 |
|
|
CEN |
EN 1870-16:2005+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 16: Double mitre sawing machines for V-cutting |
18.12.2009 |
|
|
CEN |
EN 1870-17:2007+A2:2009 Safety of woodworking machines — Circular sawing machines — Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) |
18.12.2009 |
|
|
CEN |
EN 1889-2:2003+A1:2009 Machines for underground mines — Mobile machines working underground — Safety — Part 2: Rail locomotives |
8.9.2009 |
|
|
CEN |
EN 1915-1:2001+A1:2009 Aircraft ground support equipment — General requirements — Part 1: Basic safety requirements |
8.9.2009 |
|
|
CEN |
EN 1915-2:2001+A1:2009 Aircraft ground support equipment — General requirements — Part 2: Stability and strength requirements, calculations and test methods |
8.9.2009 |
|
|
CEN |
EN 1915-3:2004+A1:2009 Aircraft ground support equipment — General requirements — Part 3: Vibration measurement methods and reduction |
8.9.2009 |
|
|
CEN |
EN 1915-4:2004+A1:2009 Aircraft ground support equipment — General requirements — Part 4: Noise measurement methods and reduction |
8.9.2009 |
|
|
CEN |
EN 1953:1998+A1:2009 Atomising and spraying equipment for coating materials — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 1974:1998+A1:2009 Food processing machinery — Slicing machines — Safety and hygiene requirements |
18.12.2009 |
|
|
CEN |
EN ISO 2151:2008 Acoustics — Noise test code for compressors and vacuum pumps — Engineering method (Grade 2) (ISO 2151:2004) |
8.9.2009 |
|
|
CEN |
EN ISO 2860:2008 Earth-moving machinery — Minimum access dimensions (ISO 2860:1992) |
8.9.2009 |
|
|
CEN |
EN ISO 2867:2008 Earth-moving machinery — Access systems (ISO 2867:2006, including Cor 1:2008) |
8.9.2009 |
|
|
CEN |
EN ISO 3164:2008 Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume (ISO 3164:1995) |
8.9.2009 |
|
|
CEN |
EN ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010) |
This is the first publication |
|
|
CEN |
EN ISO 3411:2007 Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
8.9.2009 |
|
|
CEN |
EN ISO 3449:2008 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements (ISO 3449:2005) |
8.9.2009 |
|
|
CEN |
EN ISO 3450:2008 Earth-moving machinery — Braking systems of rubber-tyred machines — Systems and performance requirements and test procedures (ISO 3450:1996) |
8.9.2009 |
|
|
CEN |
EN ISO 3457:2008 Earth-moving machinery — Guards — Definitions and requirements (ISO 3457:2003) |
8.9.2009 |
|
|
CEN |
EN ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements (ISO 3471:2008) |
8.9.2009 |
|
|
CEN |
EN ISO 3741:2009 Acoustics — Determination of sound power levels of noise sources using sound pressure — Precision methods for reverberation rooms (ISO 3741:1999, including Cor 1:2001) |
18.12.2009 |
|
|
CEN |
EN ISO 3743-1:2009 Acoustics — Determination of sound power levels of noise sources — Engineering methods for small, movable sources in reverberant fields — Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) |
18.12.2009 |
|
|
CEN |
EN ISO 3743-2:2009 Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
18.12.2009 |
|
|
CEN |
EN ISO 3744:2009 Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) |
18.12.2009 |
|
|
CEN |
EN ISO 3745:2009 Acoustics — Determination of sound power levels of noise sources using sound pressure — Precision methods for anechoic and semi-anechoic rooms (ISO 3745:2003) |
18.12.2009 |
|
|
CEN |
EN ISO 3746:2009 Acoustics — Determination of sound power levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995) |
18.12.2009 |
|
|
CEN |
EN ISO 3747:2009 Acoustics — Determination of sound power levels of noise sources using sound pressure — Comparison method in situ (ISO 3747:2000) |
18.12.2009 |
|
|
CEN |
EN ISO 4254-1:2009 Agricultural machinery — Safety — Part 1: General requirements (ISO 4254-1:2008) |
18.12.2009 |
|
|
CEN |
EN ISO 4254-5:2009 Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008) |
26.5.2010 |
|
|
CEN |
EN ISO 4254-6:2009 Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 4254-7:2009 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) |
26.5.2010 |
|
|
CEN |
EN ISO 4254-10:2009 Agricultural machinery — Safety — Part 10: Rotary tedders and rakes (ISO 4254-10:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 4871:2009 Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
18.12.2009 |
|
|
CEN |
EN ISO 5136:2009 Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method (ISO 5136:2003) |
18.12.2009 |
|
|
CEN |
EN ISO 5674:2009 Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) |
8.9.2009 |
|
|
CEN |
EN ISO 6682:2008 Earth-moving machinery — Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
8.9.2009 |
|
|
CEN |
EN ISO 6683:2008 Earth-moving machinery — Seat belts and seat belt anchorages — Performance requirements and tests (ISO 6683:2005) |
8.9.2009 |
|
|
CEN |
EN ISO 7096:2008 Earth-moving machinery — Laboratory evaluation of operator seat vibration (ISO 7096:2000) |
8.9.2009 |
|
|
EN ISO 7096:2008/AC:2009 |
|
|
|
|
CEN |
EN ISO 7235:2009 Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
18.12.2009 |
|
|
CEN |
EN ISO 7731:2008 Ergonomics — Danger signals for public and work areas — Auditory danger signals (ISO 7731:2003) |
8.9.2009 |
|
|
CEN |
EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines — Part 1: Common safety requirements (ISO 8230-1:2008) |
8.9.2009 |
|
|
CEN |
EN ISO 8230-2:2008 Safety requirements for dry-cleaning machines — Part 2: Machines using perchloroethylene (ISO 8230-2:2008) |
8.9.2009 |
|
|
CEN |
EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines — Part 3: Machines using combustible solvents (ISO 8230-3:2008) |
8.9.2009 |
|
|
CEN |
EN ISO 9614-1:2009 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points (ISO 9614-1:1993) |
18.12.2009 |
|
|
CEN |
EN ISO 9614-3:2009 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
18.12.2009 |
|
|
CEN |
EN ISO 9902-1:2001 Textile machinery — Noise test code — Part 1: Common requirements (ISO 9902-1:2001) |
18.12.2009 |
|
|
EN ISO 9902-1:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-2:2001 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) |
18.12.2009 |
|
|
EN ISO 9902-2:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-3:2001 Textile machinery — Noise test code — Part 3: Nonwoven machinery (ISO 9902-3:2001) |
18.12.2009 |
|
|
EN ISO 9902-3:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-4:2001 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001) |
18.12.2009 |
|
|
EN ISO 9902-4:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-5:2001 Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) |
18.12.2009 |
|
|
EN ISO 9902-5:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-6:2001 Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) |
18.12.2009 |
|
|
EN ISO 9902-6:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-7:2001 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) |
18.12.2009 |
|
|
EN ISO 9902-7:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 10218-1:2008 Robots for industrial environments — Safety requirements — Part 1: Robot (ISO 10218-1:2006, including Cor 1:2007) |
8.9.2009 |
|
|
CEN |
EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery — Part 1: Common requirements (ISO 10472-1:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery — Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery — Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10472-4:2008 Safety requirements for industrial laundry machinery — Part 4: Air dryers (ISO 10472-4:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery — Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery — Part 6: Ironing and fusing presses (ISO 10472-6:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10517:2009 Powered hand-held hedge trimmers — Safety (ISO 10517:2009) |
18.12.2009 |
|
|
CEN |
EN ISO 10821:2005 Industrial sewing machines — Safety requirements for sewing machines, units and systems (ISO 10821:2005) |
18.12.2009 |
|
|
EN ISO 10821:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 11102-1:2009 Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests (ISO 11102-1:1997) |
18.12.2009 |
|
|
CEN |
EN ISO 11102-2:2009 Reciprocating internal combustion engines — Handle starting equipment — Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 11111-1:2009 Textile machinery — Safety requirements — Part 1: Common requirements (ISO 11111-1:2009) |
18.12.2009 |
|
|
CEN |
EN ISO 11111-2:2005 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) |
18.12.2009 |
|
|
EN ISO 11111-2:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11111-3:2005 Textile machinery — Safety requirements — Part 3: Nonwoven machinery (ISO 11111-3:2005) |
18.12.2009 |
|
|
EN ISO 11111-3:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11111-4:2005 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) |
18.12.2009 |
|
|
EN ISO 11111-4:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11111-5:2005 Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005) |
18.12.2009 |
|
|
EN ISO 11111-5:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11111-6:2005 Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery (ISO 11111-6:2005) |
18.12.2009 |
|
|
EN ISO 11111-6:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11111-7:2005 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery (ISO 11111-7:2005) |
18.12.2009 |
|
|
EN ISO 11111-7:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11145:2008 Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols (ISO 11145:2006) |
8.9.2009 |
|
|
CEN |
EN ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements (ISO 11161:2007) |
26.5.2010 |
|
|
EN ISO 11161:2007/A1:2010 |
26.5.2010 |
Note 3 |
Date expired (30.9.2010) |
|
CEN |
EN ISO 11200:2009 Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997) |
18.12.2009 |
|
|
CEN |
EN ISO 11201:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
This is the first publication |
EN ISO 11201:2009 Note 2.1 |
30.11.2010 |
CEN |
EN ISO 11202:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
This is the first publication |
EN ISO 11202:2009 Note 2.1 |
30.11.2010 |
CEN |
EN ISO 11203:2009 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
18.12.2009 |
|
|
CEN |
EN ISO 11204:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
This is the first publication |
EN ISO 11204:2009 Note 2.1 |
30.11.2010 |
CEN |
EN ISO 11205:2009 Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
18.12.2009 |
|
|
CEN |
EN ISO 11252:2008 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation (ISO 11252:2004) |
8.9.2009 |
|
|
CEN |
EN ISO 11546-1:2009 Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
18.12.2009 |
|
|
CEN |
EN ISO 11546-2:2009 Acoustics — Determination of sound insulation performances of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
18.12.2009 |
|
|
CEN |
EN ISO 11553-1:2008 Safety of machinery — Laser processing machines — Part 1: General safety requirements (ISO 11553-1:2005) |
8.9.2009 |
|
|
CEN |
EN ISO 11553-2:2008 Safety of machinery — Laser processing machines — Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) |
8.9.2009 |
|
|
CEN |
EN ISO 11554:2008 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006) |
8.9.2009 |
|
|
CEN |
EN ISO 11680-1:2008 Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000) |
8.9.2009 |
|
|
CEN |
EN ISO 11680-2:2008 Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 2: Units for use with a back-pack power source (ISO 11680-2:2000) |
8.9.2009 |
|
|
CEN |
EN ISO 11681-1:2008 Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007) |
8.9.2009 |
|
|
CEN |
EN ISO 11681-2:2008 Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service (ISO 11681-2:2006) |
8.9.2009 |
|
|
CEN |
EN ISO 11688-1:2009 Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning (ISO/TR 11688-1:1995) |
18.12.2009 |
|
|
CEN |
EN ISO 11691:2009 Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method (ISO 11691:1995) |
18.12.2009 |
|
|
CEN |
EN ISO 11806:2008 Agricultural and forestry machinery — Portable hand-held combustion engine driven brush cutters and grass trimmers — Safety (ISO 11806:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 11957:2009 Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements (ISO 11957:1996) |
18.12.2009 |
|
|
CEN |
EN 12001:2003+A1:2009 Conveying, spraying and placing machines for concrete and mortar — Safety requirements |
26.5.2010 |
|
|
CEN |
EN 12012-1:2007+A1:2008 Plastics and rubber machines — Size reduction machines — Part 1: Safety requirements for blade granulators |
8.9.2009 |
|
|
CEN |
EN 12012-3:2001+A1:2008 Plastics and rubber machines — Size reduction machines — Part 3: Safety requirements for shredders |
8.9.2009 |
|
|
CEN |
EN 12012-4:2006+A1:2008 Plastics and rubber machines — Size reduction machines — Part 4: Safety requirements for agglomerators |
8.9.2009 |
|
|
CEN |
EN 12013:2000+A1:2008 Plastics and rubber machines — Internal mixers — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 12016:2004+A1:2008 Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity |
8.9.2009 |
|
|
CEN |
EN 12041:2000+A1:2009 Food processing machinery — Moulders — Safety and hygiene requirements |
18.12.2009 |
|
|
CEN |
EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Cutting and punching machines — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 12053:2001+A1:2008 Safety of industrial trucks — Test methods for measuring noise emissions |
8.9.2009 |
|
|
CEN |
EN 12077-2:1998+A1:2008 Cranes safety — Requirements for health and safety — Part 2: Limiting and indicating devices |
8.9.2009 |
|
|
CEN |
EN ISO 12100-1:2003 Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003) |
18.12.2009 |
|
|
EN ISO 12100-1:2003/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.12.2009) |
|
CEN |
EN ISO 12100-2:2003 Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles (ISO 12100-2:2003) |
18.12.2009 |
|
|
EN ISO 12100-2:2003/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.12.2009) |
|
CEN |
EN 12110:2002+A1:2008 Tunnelling machines — Air locks — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 12111:2002+A1:2009 Tunnelling machines — Road headers, continuous miners and impact rippers — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 12159:2000+A1:2009 Builders hoists for persons and materials with vertically guided cages |
18.12.2009 |
|
|
CEN |
EN 12162:2001+A1:2009 Liquid pumps — Safety requirements — Procedure for hydrostatic testing |
8.9.2009 |
|
|
CEN |
EN 12198-1:2000+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 1: General principles |
8.9.2009 |
|
|
CEN |
EN 12198-2:2002+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 2: Radiation emission measurement procedure |
8.9.2009 |
|
|
CEN |
EN 12198-3:2002+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 3: Reduction of radiation by attenuation or screening |
8.9.2009 |
|
|
CEN |
EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Shoe and leather presses — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 12254:2010 Screens for laser working places — Safety requirements and testing |
26.5.2010 |
EN 12254:1998+A2:2008 Note 2.1 |
Date expired (30.9.2010) |
CEN |
EN 12267:2003+A1:2010 Food processing machinery — Circular saw machines — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 12268:2003+A1:2010 Food processing machinery — Band saw machines — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 12301:2000+A1:2008 Plastics and rubber machines — Calenders — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 12312-1:2001+A1:2009 Aircraft ground support equipment — Specific requirements — Part 1: Passenger stairs |
8.9.2009 |
|
|
CEN |
EN 12312-2:2002+A1:2009 Aircraft ground support equipment — Specific requirements — Part 2: Catering vehicles |
8.9.2009 |
|
|
CEN |
EN 12312-3:2003+A1:2009 Aircraft ground support equipment — Specific requirements — Part 3: Conveyor belt vehicles |
8.9.2009 |
|
|
CEN |
EN 12312-4:2003+A1:2009 Aircraft ground support equipment — Specific requirements — Part 4: Passenger boarding bridges |
8.9.2009 |
|
|
CEN |
EN 12312-5:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 5: Aircraft fuelling equipment |
8.9.2009 |
|
|
CEN |
EN 12312-6:2004+A1:2009 Aircraft ground support equipment — Specific requirements — Part 6: Deicers and deicing/antiicing equipment |
8.9.2009 |
|
|
CEN |
EN 12312-7:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 7: Air-craft movement equipment |
8.9.2009 |
|
|
CEN |
EN 12312-8:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 8: Maintenance stairs and platforms |
8.9.2009 |
|
|
CEN |
EN 12312-9:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 9: Container/Pallet loaders |
8.9.2009 |
|
|
Warning: This publication does not concern clause 5.6 of the standard, the application of which does not confer a presumption of conformity with the essential health and safety requirement 1.5.15 of Annex I to Directive 2006/42/EC, in conjunction with the requirement 1.1.2(b) of that Annex. |
||||
CEN |
EN 12312-10:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 10: Container/Pallet transfer transporters |
8.9.2009 |
|
|
CEN |
EN 12312-12:2002+A1:2009 Aircraft ground support equipment — Specific requirements — Part 12: Potable water service equipment |
8.9.2009 |
|
|
CEN |
EN 12312-13:2002+A1:2009 Aircraft ground support equipment — Specific requirements — Part 13: Lavatory service equipment |
8.9.2009 |
|
|
CEN |
EN 12312-14:2006+A1:2009 Aircraft ground support equipment — Specific requirements — Part 14: Disabled/incapacitated passenger boarding vehicles |
8.9.2009 |
|
|
CEN |
EN 12312-15:2006+A1:2009 Aircraft ground support equipment — Specific requirements — Part 15: Baggage and equipment tractors |
8.9.2009 |
|
|
CEN |
EN 12312-16:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 16: Air start equipment |
8.9.2009 |
|
|
CEN |
EN 12312-17:2004+A1:2009 Aircraft ground support equipment — Specific requirements — Part 17: Air conditioning equipment |
8.9.2009 |
|
|
CEN |
EN 12312-18:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 18: Nitrogen or Oxygen units |
8.9.2009 |
|
|
CEN |
EN 12312-19:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
8.9.2009 |
|
|
CEN |
EN 12312-20:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 20: Electrical ground power units |
8.9.2009 |
|
|
CEN |
EN 12321:2003+A1:2009 Underground mining machinery — Specification for the safety requirements of armoured face conveyors |
8.9.2009 |
|
|
CEN |
EN 12331:2003+A2:2010 Food processing machinery — Mincing machines — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 12336:2005+A1:2008 Tunnelling machines — Shield machines, thrust boring machines, auger boring machines, lining erection equipment — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 12348:2000+A1:2009 Core drilling machines on stand — Safety |
8.9.2009 |
|
|
CEN |
EN 12355:2003+A1:2010 Food processing machinery — Derinding-, skinning- and membrane removal machines — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 12385-1:2002+A1:2008 Steel wire ropes — Safety — Part 1: General requirements |
8.9.2009 |
|
|
CEN |
EN 12385-2:2002+A1:2008 Steel wire ropes — Safety — Part 2: Definitions, designation and classification |
8.9.2009 |
|
|
CEN |
EN 12385-3:2004+A1:2008 Steel wire ropes — Safety — Part 3: Information for use and maintenance |
8.9.2009 |
|
|
CEN |
EN 12385-4:2002+A1:2008 Steel wire ropes — Safety — Part 4: Stranded ropes for general lifting applications |
8.9.2009 |
|
|
CEN |
EN 12385-10:2003+A1:2008 Steel wire ropes — Safety — Part 10: Spiral ropes for general structural applications |
8.9.2009 |
|
|
CEN |
EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Modular shoe repair equipment — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 12409:2008 Plastics and rubber machines — Thermoforming machines — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 12417:2001+A2:2009 Machine tools — Safety — Machining centres |
8.9.2009 |
|
|
EN 12417:2001+A2:2009/AC:2010 |
|
|
|
|
CEN |
EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site — Safety |
8.9.2009 |
|
|
CEN |
EN 12505:2000+A1:2009 Food processing machinery — Centrifugal machines for processing edible oils and fats — Safety and hygiene requirements |
18.12.2009 |
|
|
CEN |
EN 12525:2000+A2:2010 Agricultural machinery — Front loaders — Safety |
26.5.2010 |
|
|
CEN |
EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Noise test code — Common requirements |
8.9.2009 |
|
|
CEN |
EN 12547:1999+A1:2009 Centrifuges — Common safety requirements |
8.9.2009 |
|
|
CEN |
EN 12549:1999+A1:2008 Acoustics — Noise test code for fastener driving tools — Engineering method |
8.9.2009 |
|
|
CEN |
EN 12581:2005+A1:2010 Coating plants — Machinery for dip coating and electrodeposition of organic liquid coating material — Safety requirements |
This is the first publication |
|
|
CEN |
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure — Safety requirements |
This is the first publication |
|
|
CEN |
EN 12622:2009 Safety of machine tools — Hydraulic press brakes |
26.5.2010 |
|
|
CEN |
EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates — Installation and use |
8.9.2009 |
|
|
CEN |
EN 12643:1997+A1:2008 Earth-moving machinery — Rubber-tyred machines — Steering requirements (ISO 5010:1992 modified) |
8.9.2009 |
|
|
CEN |
EN 12644-1:2001+A1:2008 Cranes — Information for use and testing — Part 1: Instructions |
8.9.2009 |
|
|
CEN |
EN 12644-2:2000+A1:2008 Cranes — Information for use and testing — Part 2: Marking |
8.9.2009 |
|
|
CEN |
EN 12649:2008 Concrete compactors and smoothing machines — Safety |
8.9.2009 |
|
|
CEN |
EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines — Nailing machines — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 12693:2008 Refrigerating systems and heat pumps — Safety and environmental requirements — Positive displacement refrigerant compressors |
8.9.2009 |
|
|
CEN |
EN 12717:2001+A1:2009 Safety of machine tools — Drilling machines |
8.9.2009 |
|
|
CEN |
EN 12733:2001+A1:2009 Agricultural and forestry machinery — Pedestrian controlled motor mowers — Safety |
8.9.2009 |
|
|
CEN |
EN 12750:2001+A1:2009 Safety of woodworking machines — Four-sided moulding machines |
18.12.2009 |
|
|
CEN |
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment — Safety requirements |
This is the first publication |
|
|
CEN |
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials — Safety requirements — Part 1: Mixing machinery for use in vehicle refinishing |
This is the first publication |
|
|
CEN |
EN 12779:2004+A1:2009 Safety of woodworking machines — Chip and dust extraction systems with fixed installation — Safety related performances and safety requirements |
18.12.2009 |
|
|
CEN |
EN 12851:2005+A1:2010 Food processing machinery — Catering attachments for machines having an auxiliary drive hub — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 12852:2001+A1:2010 Food processing machinery — Food processors and blenders — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 12853:2001+A1:2010 Food processing machinery — Hand-held blenders and whisks — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 12854:2003+A1:2010 Food processing machinery — Beam mixers — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 12855:2003+A1:2010 Food processing machinery — Rotating bowl cutters — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 12881-1:2005+A1:2008 Conveyor belts — Fire simulation flammability testing — Part 1: Propane burner tests |
8.9.2009 |
|
|
CEN |
EN 12881-2:2005+A1:2008 Conveyor belts — Fire simulation flammability testing — Part 2: Large scale fire test |
8.9.2009 |
|
|
CEN |
EN 12882:2008 Conveyor belts for general purpose use — Electrical and flammability safety requirements |
8.9.2009 |
|
|
CEN |
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 1: Common safety requirements |
This is the first publication |
|
|
CEN |
EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 2: Safety of machines using water based cleaning liquids |
8.9.2009 |
|
|
CEN |
EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 3: Safety of machines using flammable cleaning liquids |
8.9.2009 |
|
|
CEN |
EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours — Part 4: Safety of machines using halogenated solvents |
8.9.2009 |
|
|
CEN |
EN 12957:2001+A1:2009 Machine tools — Safety — Electro discharge machines |
8.9.2009 |
|
|
CEN |
EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry — Power take-off (PTO) drive shafts and their guards — Safety |
18.12.2009 |
|
|
CEN |
EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates — Safety devices for power operated doors and gates — Requirements and test methods |
18.12.2009 |
|
|
CEN |
EN 12981:2005+A1:2009 Coating plants — Spray booths for application of organic powder coating material — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 12984:2005+A1:2010 Food processing machinery — Portable and/or hand-guided machines and appliances with mechanically driven cutting tools — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 13000:2010 Cranes — Mobile cranes |
26.5.2010 |
|
|
CEN |
EN 13001-1:2004+A1:2009 Cranes — General design — Part 1: General principles and requirements |
8.9.2009 |
|
|
EN 13001-1:2004+A1:2009/AC:2009 |
|
|
|
|
CEN |
EN 13001-2:2004+A3:2009 Crane safety — General design — Part 2: Load effects |
8.9.2009 |
EN 13001-2:2004+A2:2009 Note 2.1 |
Date expired (28.12.2009) |
CEN |
EN 13015:2001+A1:2008 Maintenance for lifts and escalators — Rules for maintenance instructions |
8.9.2009 |
|
|
CEN |
EN 13019:2001+A1:2008 Machines for road surface cleaning — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 13020:2004+A1:2010 Road surface treatment machines — Safety requirements |
This is the first publication |
|
|
CEN |
EN 13021:2003+A1:2008 Winter service machines — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment — Accuracy grades 2 and 3 |
26.5.2010 |
|
|
CEN |
EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 1: Storage, handling and transportation equipment inside the factory |
8.9.2009 |
|
|
CEN |
EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 2: Storage, handling and transportation equipment outside the factory |
8.9.2009 |
|
|
CEN |
EN 13035-3:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 3: Cutting machines |
18.12.2009 |
|
|
EN 13035-3:2003+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 4: Tilting tables |
26.5.2010 |
|
|
CEN |
EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 5: Machines and installations for stacking and de-stacking |
26.5.2010 |
|
|
CEN |
EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 6: Machines for break-out |
26.5.2010 |
|
|
CEN |
EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 7: Cutting machines for laminated glass |
26.5.2010 |
|
|
CEN |
EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 9: Washing installations |
26.5.2010 |
|
|
CEN |
EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 11: Drilling machines |
26.5.2010 |
|
|
CEN |
EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 1: Gob feeder |
18.12.2009 |
|
|
CEN |
EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 2: Handling machines for feeding |
18.12.2009 |
|
|
CEN |
EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 3: IS machines |
18.12.2009 |
|
|
CEN |
EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 5: Presses |
18.12.2009 |
|
|
CEN |
EN 13059:2002+A1:2008 Safety of industrial trucks — Test methods for measuring vibration |
8.9.2009 |
|
|
CEN |
EN 13102:2005+A1:2008 Ceramic machines — Safety — Loading and unloading of fine clay tiles |
8.9.2009 |
|
|
CEN |
EN 13112:2002+A1:2009 Tannery machines — Splitting and bandknife shearing machines — Safety requirements |
26.5.2010 |
|
|
CEN |
EN 13114:2002+A1:2009 Tannery machines — Rotating process vessels — Safety requirements |
26.5.2010 |
|
|
CEN |
EN 13118:2000+A1:2009 Agricultural machinery — Potato harvesting equipment — Safety |
18.12.2009 |
|
|
CEN |
EN 13120:2009 Internal blinds — Performance requirements including safety |
8.9.2009 |
|
|
CEN |
EN 13128:2001+A2:2009 Safety of machine tools — Milling machines (including boring machines) |
8.9.2009 |
|
|
EN 13128:2001+A2:2009/AC:2010 |
|
|
|
|
CEN |
EN 13135-1:2003+A1:2010 Cranes — Equipment — Part 1: Electrotechnical equipment |
This is the first publication |
|
|
CEN |
EN 13140:2000+A1:2009 Agricultural machinery — Sugar beet and fodder beet harvesting equipment — Safety |
18.12.2009 |
|
|
CEN |
EN 13155:2003+A2:2009 Cranes — Safety — Non-fixed load lifting attachments |
8.9.2009 |
|
|
CEN |
EN 13157:2004+A1:2009 Cranes — Safety — Hand powered cranes |
18.12.2009 |
|
|
CEN |
EN 13208:2003+A1:2010 Food processing machinery — Vegetable peelers — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 13218:2002+A1:2008 Machine tools — Safety — Stationary grinding machines |
8.9.2009 |
|
|
EN 13218:2002+A1:2008/AC:2010 |
|
|
|
|
CEN |
EN 13288:2005+A1:2009 Food processing machinery — Bowl lifting and tilting machines — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13355:2004+A1:2009 Coating plants — Combined booths — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 13367:2005+A1:2008 Ceramic machines — Safety — Transfer platforms and cars |
8.9.2009 |
|
|
EN 13367:2005+A1:2008/AC:2009 |
|
|
|
|
CEN |
EN 13389:2005+A1:2009 Food processing machinery — Mixers with horizontal shafts — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13390:2002+A1:2009 Food processing machinery — Pie and tart machines — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13411-1:2002+A1:2008 Terminations for steel wire ropes — Safety — Part 1: Thimbles for steel wire rope slings |
8.9.2009 |
|
|
CEN |
EN 13411-2:2001+A1:2008 Terminations for steel wire ropes — Safety — Part 2: Splicing of eyes for wire rope slings |
8.9.2009 |
|
|
CEN |
EN 13411-3:2004+A1:2008 Terminations for steel wire ropes — Safety — Part 3: Ferrules and ferrule-securing |
8.9.2009 |
|
|
CEN |
EN 13411-4:2002+A1:2008 Terminations for steel wire ropes — Safety — Part 4: Metal and resin socketing |
8.9.2009 |
|
|
CEN |
EN 13411-5:2003+A1:2008 Terminations for steel wire ropes — Safety — Part 5: U-bolt wire rope grips |
8.9.2009 |
|
|
CEN |
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes — Safety — Part 6: Asymmetric wedge socket |
8.9.2009 |
|
|
CEN |
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes — Safety — Part 7: Symmetric wedge socket |
8.9.2009 |
|
|
CEN |
EN 13414-1:2003+A2:2008 Steel wire rope slings — Safety — Part 1: Slings for general lifting service |
8.9.2009 |
|
|
CEN |
EN 13414-2:2003+A2:2008 Steel wire rope slings — Safety — Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
8.9.2009 |
|
|
CEN |
EN 13414-3:2003+A1:2008 Steel wire rope slings — Safety — Part 3: Grommets and cable-laid slings |
8.9.2009 |
|
|
CEN |
EN 13418:2004+A1:2008 Plastics and rubber machines — Winding machines for film or sheet — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 13448:2001+A1:2009 Agricultural and forestry machinery — Inter-row mowing units — Safety |
18.12.2009 |
|
|
CEN |
EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines — Splitting, skiving, cutting, cementing and cement drying machines — Safety requirements |
This is the first publication |
|
|
CEN |
EN 13478:2001+A1:2008 Safety of machinery — Fire prevention and protection |
8.9.2009 |
|
|
CEN |
EN 13490:2001+A1:2008 Mechanical vibration — Industrial trucks — Laboratory evaluation and specification of operator seat vibration |
8.9.2009 |
|
|
CEN |
EN 13524:2003+A1:2009 Highway maintenance machines — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 13525:2005+A2:2009 Forestry machinery — Wood chippers — Safety |
18.12.2009 |
|
|
CEN |
EN 13531:2001+A1:2008 Earth-moving machinery — Tip-over protection structure (TOPS) for compact excavators — Laboratory tests and performance requirements (ISO 12117:1997 modified) |
8.9.2009 |
|
|
CEN |
EN 13534:2006+A1:2010 Food processing machinery — Curing injection machines — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 13557:2003+A2:2008 Cranes — Controls and control stations |
8.9.2009 |
|
|
CEN |
EN 13561:2004+A1:2008 External blinds — Performance requirements including safety |
8.9.2009 |
|
|
CEN |
EN 13570:2005+A1:2010 Food processing machinery — Mixing machines — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 13586:2004+A1:2008 Cranes — Access |
8.9.2009 |
|
|
CEN |
EN 13591:2005+A1:2009 Food processing machinery — Fixed deck oven loaders — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13617-1:2004+A1:2009 Petrol filling stations — Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
8.9.2009 |
|
|
CEN |
EN 13621:2004+A1:2010 Food processing machinery — Salad dryers — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 13659:2004+A1:2008 Shutters — Performance requirements including safety |
8.9.2009 |
|
|
CEN |
EN 13675:2004+A1:2010 Safety of machinery — Safety requirements for tube forming and rolling mills and their finishing line equipment |
This is the first publication |
|
|
CEN |
EN 13684:2004+A3:2009 Garden equipment — Pedestrian controlled lawn aerators and scarifiers — Safety |
26.5.2010 |
EN 13684:2004+A2:2009 Note 2.1 |
Date expired (30.6.2010) |
CEN |
EN 13731:2007 Lifting bag systems for fire and rescue service use — Safety and performance requirements |
8.9.2009 |
|
|
CEN |
EN 13732:2002+A2:2009 Food processing machinery — Bulk Milk Coolers on Farms — Requirements for construction, performance, suitability for use, safety and hygiene |
8.9.2009 |
|
|
CEN |
EN ISO 13732-1:2008 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces (ISO 13732-1:2006) |
8.9.2009 |
|
|
CEN |
EN ISO 13732-3:2008 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces (ISO 13732-3:2005) |
8.9.2009 |
|
|
CEN |
EN 13736:2003+A1:2009 Safety of machine tools — Pneumatic presses |
8.9.2009 |
|
|
CEN |
EN ISO 13753:2008 Mechanical vibration and shock — Hand-arm vibration — Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) |
8.9.2009 |
|
|
CEN |
EN ISO 13849-1:2008 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2006) |
8.9.2009 |
EN ISO 13849-1:2006 EN 954-1:1996 |
31.12.2011 |
EN ISO 13849-1:2008/AC:2009 |
|
|
|
|
CEN |
EN ISO 13849-2:2008 Safety of machinery — Safety-related parts of control systems — Part 2: Validation (ISO 13849-2:2003) |
8.9.2009 |
|
|
CEN |
EN ISO 13850:2008 Safety of machinery — Emergency stop — Principles for design (ISO 13850:2006) |
8.9.2009 |
|
|
CEN |
EN ISO 13855:2010 Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
This is the first publication |
EN 999:1998+A1:2008 Note 2.1 |
30.11.2010 |
CEN |
EN ISO 13857:2008 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
8.9.2009 |
|
|
CEN |
EN 13862:2001+A1:2009 Floor cutting-off machines — Safety |
8.9.2009 |
|
|
CEN |
EN 13870:2005+A1:2010 Food processing machinery — Chop cutting machines — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 13871:2005+A1:2010 Food processing machinery — Cubes cutting machinery — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 13885:2005+A1:2010 Food processing machinery — Clipping machines — Safety and hygiene requirements |
This is the first publication |
|
|
CEN |
EN 13886:2005+A1:2010 Food processing machinery — Cooking kettles equipped with powered stirrer and/or mixer — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes — Dee shackles and bow shackles — Grade 6 — Safety |
8.9.2009 |
|
|
CEN |
EN 13898:2003+A1:2009 Machine tools — Safety — Sawing machines for cold metal |
8.9.2009 |
|
|
EN 13898:2003+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 13951:2003+A1:2008 Liquid pumps — Safety requirements — Agrifoodstuffs equipment — Design rules to ensure hygiene in use |
8.9.2009 |
|
|
CEN |
EN 13954:2005+A1:2010 Food processing machinery — Bread slicers — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13985:2003+A1:2009 Machine tools — Safety — Guillotine shears |
8.9.2009 |
|
|
CEN |
EN 14010:2003+A1:2009 Safety of machinery — Equipment for power driven parking of motor vehicles — Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
18.12.2009 |
|
|
CEN |
EN 14017:2005+A2:2009 Agricultural and forestry machinery — Solid fertilizer distributors — Safety |
18.12.2009 |
EN 14017:2005+A1:2008 Note 2.1 |
Date expired (31.1.2010) |
CEN |
EN 14018:2005+A1:2009 Agricultural and forestry machinery — Seed drills — Safety |
18.12.2009 |
|
|
CEN |
EN 14033-3:2009 Railway applications — Track — Railbound construction and maintenance machines — Part 3: General safety requirements |
26.5.2010 |
|
|
CEN |
EN 14043:2005+A1:2009 High rise aerial appliances for fire service use — Turntable ladders with combined movements — Safety and performance requirements and test methods |
8.9.2009 |
|
|
CEN |
EN 14044:2005+A1:2009 High rise aerial appliances for fire service use — Turntable ladders with sequential movements — Safety and performance requirements and test methods |
8.9.2009 |
|
|
CEN |
EN 14070:2003+A1:2009 Safety of machine tools — Transfer and special-purpose machines |
8.9.2009 |
|
|
EN 14070:2003+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN ISO 14121-1:2007 Safety of machinery — Risk assessment — Part 1: Principles (ISO 14121-1:2007) |
8.9.2009 |
|
|
CEN |
EN ISO 14122-1:2001 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001) |
This is the first publication |
|
|
EN ISO 14122-1:2001/A1:2010 |
This is the first publication |
Note 3 |
31.10.2010 |
|
CEN |
EN ISO 14122-2:2001 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways (ISO 14122-2:2001) |
This is the first publication |
|
|
EN ISO 14122-2:2001/A1:2010 |
This is the first publication |
Note 3 |
31.10.2010 |
|
CEN |
EN ISO 14122-3:2001 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001) |
This is the first publication |
|
|
EN ISO 14122-3:2001/A1:2010 |
This is the first publication |
Note 3 |
31.10.2010 |
|
CEN |
EN ISO 14159:2008 Safety of machinery — Hygiene requirements for the design of machinery (ISO 14159:2002) |
8.9.2009 |
|
|
CEN |
EN 14238:2004+A1:2009 Cranes — Manually controlled load manipulating devices |
18.12.2009 |
|
|
CEN |
EN ISO 14314:2009 Reciprocal internal combustion engines — Recoil starting equipment — General safety requirements (ISO 14314:2004) |
18.12.2009 |
|
|
CEN |
EN 14439:2006+A2:2009 Cranes — Safety — Tower cranes |
8.9.2009 |
|
|
CEN |
EN 14462:2005+A1:2009 Surface treatment equipment — Noise test code for surface treatment equipment including its ancillary handling equipment — Accuracy grades 2 and 3 |
8.9.2009 |
|
|
CEN |
EN 14466:2005+A1:2008 Fire-fighting pumps — Portable pumps — Safety and performance requirements, tests |
8.9.2009 |
|
|
CEN |
EN 14492-1:2006+A1:2009 Cranes — Power driven winches and hoists — Part 1: Power driven winches |
18.12.2009 |
|
|
EN 14492-1:2006+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 14492-2:2006+A1:2009 Cranes — Power driven winches and hoists — Part 2: Power driven hoists |
18.12.2009 |
|
|
EN 14492-2:2006+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 14502-2:2005+A1:2008 Cranes — Equipment for the lifting of persons — Part 2: Elevating control stations |
8.9.2009 |
|
|
CEN |
EN 14655:2005+A1:2010 Food processing machinery — Baguette slicers — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 14656:2006+A1:2010 Safety of machinery — Safety requirements for extrusion presses for steel and non-ferrous metals |
This is the first publication |
|
|
CEN |
EN 14658:2005+A1:2010 Continuous handling equipment and systems — General safety requirements for continuous handling equipment for opencast lignite mining |
26.5.2010 |
|
|
CEN |
EN 14673:2006+A1:2010 Safety of machinery — Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
This is the first publication |
|
|
CEN |
EN 14677:2008 Safety of machinery — Secondary steelmaking — Machinery and equipment for treatment of liquid steel |
8.9.2009 |
|
|
CEN |
EN 14681:2006+A1:2010 Safety of machinery — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
This is the first publication |
|
|
CEN |
EN 14710-1:2005+A2:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements |
8.9.2009 |
|
|
CEN |
EN 14710-2:2005+A2:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 2: Verification of general and safety requirements |
8.9.2009 |
|
|
CEN |
EN ISO 14738:2008 Safety of machinery — Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) |
8.9.2009 |
|
|
CEN |
EN 14753:2007 Safety of machinery — Safety requirements for machinery and equipment for continuous casting of steel |
8.9.2009 |
|
|
CEN |
EN 14861:2004+A1:2009 Forest machinery — Self propelled machinery — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 14886:2008 Plastics and rubber machines — Bandknife cutting machines for block foams — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 14910:2007+A1:2009 Garden equipment — Walk-behind combustion engine powered trimmers — Safety |
8.9.2009 |
|
|
CEN |
EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment — Pedestrian controlled and hand-held machines — Determination of accessibility of hot surfaces |
8.9.2009 |
|
|
CEN |
EN 14957:2006+A1:2010 Food processing machinery — Dishwashing machines with conveyor — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 14958:2006+A1:2009 Food processing machinery — Machinery for grinding and processing flour and semolina — Safety and hygiene requirements |
8.9.2009 |
|
|
CEN |
EN 14973:2006+A1:2008 Conveyor belts for use in underground installations — Electrical and flammability safety requirements |
8.9.2009 |
|
|
CEN |
EN ISO 14982:2009 Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria (ISO 14982:1998) |
8.9.2009 |
|
|
CEN |
EN 15000:2008 Safety of industrial trucks — Self propelled variable reach trucks — Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
8.9.2009 |
|
|
CEN |
EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site — Safety |
8.9.2009 |
|
|
CEN |
EN 15056:2006+A1:2009 Cranes — Requirements for container handling spreaders |
8.9.2009 |
|
|
CEN |
EN 15059:2009 Snow grooming equipment — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 15061:2007+A1:2008 Safety of machinery — Safety requirements for strip processing line machinery and equipment |
8.9.2009 |
|
|
CEN |
EN 15067:2007 Plastics and rubber machines — Film converting machines for bags and sacks — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 15093:2008 Safety of Machinery — Safety requirements for hot flat rolling mills |
8.9.2009 |
|
|
CEN |
EN 15094:2008 Safety of Machinery — Safety requirements for cold flat rolling mills |
8.9.2009 |
|
|
CEN |
EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 15162:2008 Machines and plants for mining and tooling of natural stone — Safety requirements for gang saws |
8.9.2009 |
|
|
CEN |
EN 15163:2008 Machines and installations for the exploitation and processing of natural stone — Safety — Requirements for diamond wire saws |
8.9.2009 |
|
|
CEN |
EN 15164:2008 Machines and plants for mining and tooling of natural stone — Safety — Requirements for chain- and belt-slotting machines |
8.9.2009 |
|
|
CEN |
EN 15166:2008 Food processing machinery — Automatic back splitting machines of butchery carcasses — Safety and hygiene requirements |
8.9.2009 |
|
|
CEN |
EN 15268:2008 Petrol filling stations — Safety requirements for the construction of submersible pump assemblies |
8.9.2009 |
|
|
CEN |
EN 15503:2009 Garden equipment — Garden blowers, vacuums and blower/vacuums — Safety |
26.5.2010 |
|
|
CEN |
EN ISO 15536-1:2008 Ergonomics — Computer manikins and body templates — Part 1: General requirements (ISO 15536-1:2005) |
8.9.2009 |
|
|
CEN |
EN 15695-1:2009 Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 1: Cab classification, requirements and test procedures |
26.5.2010 |
|
|
CEN |
EN 15695-2:2009 Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 2: Filters, requirements and test procedures |
26.5.2010 |
|
|
CEN |
EN ISO 15744:2008 Hand-held non-electric power tools — Noise measurement code — Engineering method (grade 2) (ISO 15744:2002) |
8.9.2009 |
|
|
CEN |
EN 15746-2:2010 Railway applications — Track — Road-rail machines and associated equipment — Part 2: General safety requirements |
This is the first publication |
|
|
CEN |
EN 15811:2009 Agricultural machinery — Guards for moving parts of power transmission — Guard opening with tool (ISO/TS 28923:2007 modified) |
18.12.2009 |
|
|
CEN |
EN ISO 19432:2008 Building construction machinery and equipment — Portable, hand-held, internal combustion engine driven cut-off machines — Safety requirements and testing (ISO 19432:2006) |
8.9.2009 |
|
|
CEN |
EN ISO 20361:2009 Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy (ISO 20361:2007) |
8.9.2009 |
|
|
CEN |
EN ISO 20643:2008 Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission (ISO 20643:2005) |
8.9.2009 |
|
|
CEN |
EN ISO 22867:2008 Forestry machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles (ISO 22867:2004, including Cor 1:2006) |
8.9.2009 |
|
|
CEN |
EN ISO 22868:2008 Forestry machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy) (ISO 22868:2005) |
8.9.2009 |
|
|
CEN |
EN ISO 23125:2010 Machine tools — Safety — Turning machines (ISO 23125:2010) |
This is the first publication |
|
|
CEN |
EN ISO 28139:2009 Agricultural and forestry machinery — Knapsack combustion-engine-driven mistblowers — Safety requirements (ISO 28139:2009) |
18.12.2009 |
|
|
CEN |
EN ISO 28927-1:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 1: Angle and vertical grinders (ISO 28927-1:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-2:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-3:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-5:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 5: Drills and impact drills (ISO 28927-5:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-6:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 6: Rammers (ISO 28927-6:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-7:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 7: Nibblers and shears (ISO 28927-7:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-8:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-9:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
26.5.2010 |
|
|
CEN |
EN 30326-1:1994 Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements (ISO 10326-1:1992) |
8.9.2009 |
|
|
EN 30326-1:1994/A1:2007 |
8.9.2009 |
Note 3 |
Date expired (28.12.2009) |
|
Cenelec |
EN 50223:2010 Stationary electrostatic application equipment for ignitable flock material — Safety requirements |
This is the first publication |
|
|
Cenelec |
EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material — Safety requirements |
26.5.2010 |
|
|
Cenelec |
EN 60204-1:2006 Safety of machinery — Electrical equipment of machines — Part 1: General requirements IEC 60204-1:2005 (Modified) |
26.5.2010 |
|
|
EN 60204-1:2006/A1:2009 IEC 60204-1:2005/A1:2008 |
26.5.2010 |
Note 3 |
1.2.2012 |
|
Cenelec |
EN 60204-11:2000 Safety of machinery — Electrical equipment of machines — Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV IEC 60204-11:2000 |
26.5.2010 |
|
|
Cenelec |
EN 60204-32:2008 Safety of machinery — Electrical equipment of machines — Part 32: Requirements for hoisting machines IEC 60204-32:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60335-1:2002 Household and similar electrical appliances — Safety — Part 1: General requirements IEC 60335-1:2001 (Modified) |
This is the first publication |
|
|
EN 60335-1:2002/A11:2004 |
This is the first publication |
|
|
|
EN 60335-1:2002/A1:2004 IEC 60335-1:2001/A1:2004 |
This is the first publication |
|
|
|
EN 60335-1:2002/A12:2006 |
This is the first publication |
|
|
|
EN 60335-1:2002/A13:2008 |
This is the first publication |
|
|
|
EN 60335-1:2002/A14:2010 |
This is the first publication |
|
|
|
Cenelec |
EN 60335-2-67:2009 Household and similar electrical appliances — Safety — Part 2-67: Particular requirements for floor treatment and floor cleaning machines for commercial use IEC 60335-2-67:2002 (Modified) + A1:2005 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60335-2-68:2009 Household and similar electrical appliances — Safety — Part 2-68: Particular requirements for spray extraction machines for commercial use IEC 60335-2-68:2002 (Modified) + A1:2005 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60335-2-69:2009 Household and similar electrical appliances — Safety — Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use IEC 60335-2-69:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60335-2-72:2009 Household and similar electrical appliances — Safety — Part 2-72: Particular requirements for automatic machines for floor treatment for commercial use IEC 60335-2-72:2002 (Modified) + A1:2005 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60335-2-79:2009 Household and similar electrical appliances — Safety — Part 2-79: Particular requirements for high pressure cleaners and steam cleaners IEC 60335-2-79:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60745-1:2009 Hand-held motor-operated electric tools — Safety — Part 1: General requirements IEC 60745-1:2006 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-1:2010 Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills IEC 60745-2-1:2003 (Modified) + A1:2008 |
This is the first publication |
|
|
Cenelec |
EN 60745-2-2:2010 Hand-held motor-operated electric tools — Safety — Part 2-2: Particular requirements for screwdrivers and impact wrenches IEC 60745-2-2:2003 (Modified) + A1:2008 |
This is the first publication |
|
|
Cenelec |
EN 60745-2-4:2009 Hand-held motor-operated electric tools — Safety — Part 2-4: Particular requirements for sanders and polishers other than disk type IEC 60745-2-4:2002 (Modified) + A1:2008 (Modified) |
26.5.2010 |
|
|
Cenelec |
EN 60745-2-6:2010 Hand-held motor-operated electric tools — Safety — Part 2-6: Particular requirements for hammers IEC 60745-2-6:2003 (Modified) + A1:2006 + A2:2008 |
This is the first publication |
|
|
Cenelec |
EN 60745-2-8:2009 Hand-held motor-operated electric tools — Safety — Part 2-8: Particular requirements for shears and nibblers IEC 60745-2-8:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-9:2009 Hand-held motor-operated electric tools — Safety — Part 2-9: Particular requirements for tappers IEC 60745-2-9:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-11:2010 Hand-held motor-operated electric tools — Safety — Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) IEC 60745-2-11:2003 (Modified) + A1:2008 |
This is the first publication |
|
|
Cenelec |
EN 60745-2-12:2009 Hand-held motor-operated electric tools — Safety — Part 2-12: Particular requirements for concrete vibrators IEC 60745-2-12:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-13:2009 Hand-held motor-operated electric tools — Safety — Part 2-13: Particular requirements for chain saws IEC 60745-2-13:2006 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-14:2009 Hand-held motor-operated electric tools — Safety — Part 2-14: Particular requirements for planers IEC 60745-2-14:2003 (Modified) + A1:2006 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-15:2009 Hand-held motor-operated electric tools — Safety — Part 2-15: Particular requirements for hedge trimmers IEC 60745-2-15:2006 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-18:2009 Hand-held motor-operated electric tools — Safety — Part 2-18: Particular requirements for strapping tools IEC 60745-2-18:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-19:2009 Hand-held motor-operated electric tools — Safety — Part 2-19: Particular requirements for jointers IEC 60745-2-19:2005 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-20:2009 Hand-held motor-operated electric tools — Safety — Part 2-20: Particular requirements for band saws IEC 60745-2-20:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-21:2009 Hand-held motor-operated electric tools — Safety — Part 2-21: Particular requirements for drain cleaners IEC 60745-2-21:2002 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 61029-1:2009 Safety of transportable motor-operated electric tools — Part 1: General requirements IEC 61029-1:1990 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 61029-2-1:2010 Safety of transportable motor-operated electric tools — Part 2-1: Particular requirements for circular saw benches IEC 61029-2-1:1993 (Modified) + A1:1999 + A2:2001 |
This is the first publication |
|
|
Cenelec |
EN 61029-2-6:2010 Safety of transportable motor-operated electric tools — Part 2-6: Particular requirements for diamond drills with water supply IEC 61029-2-6:1993 (Modified) |
This is the first publication |
|
|
Cenelec |
EN 61029-2-8:2010 Safety of transportable motor-operated electric tools — Part 2-8: Particular requirements for single spindle vertical moulders IEC 61029-2-8:1995 (Modified) + A1:1999 + A2:2001 |
This is the first publication |
|
|
Cenelec |
EN 61029-2-9:2009 Safety of transportable motor-operated electric tools — Part 2-9: Particular requirements for mitre saws IEC 61029-2-9:1995 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 61029-2-10:2010 Safety of transportable motor-operated electric tools — Part 2-10: Particular requirements for cutting-off grinders IEC 61029-2-10:1998 (Modified) |
This is the first publication |
|
|
Cenelec |
EN 61029-2-11:2009 Safety of transportable motor-operated electric tools — Part 2-11: Particular requirements for combined mitre and bench saws IEC 61029-2-11:2001 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 61310-1:2008 Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals IEC 61310-1:2007 |
18.12.2009 |
|
|
Cenelec |
EN 61310-2:2008 Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking IEC 61310-2:2007 |
18.12.2009 |
|
|
Cenelec |
EN 61310-3:2008 Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators IEC 61310-3:2007 |
18.12.2009 |
|
|
Cenelec |
EN 61496-1:2004 Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests IEC 61496-1:2004 (Modified) |
26.5.2010 |
|
|
EN 61496-1:2004/A1:2008 IEC 61496-1:2004/A1:2007 |
26.5.2010 |
Note 3 |
1.6.2011 |
|
Cenelec |
EN 61800-5-2:2007 Adjustable speed electrical power drive systems — Part 5-2: Safety requirements — Functional IEC 61800-5-2:2007 |
18.12.2009 |
|
|
Cenelec |
EN 62061:2005 Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems IEC 62061:2005 |
26.5.2010 |
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
Note 2.1: |
The new (‘or amended’) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (‘partially’) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (‘partially’) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (‘column 3’) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive. |
NOTE:
— |
Any information concerning the availability of the standards can be obtained either from the European Standardisation Organisations or from the national standardisation bodies of which the list is annexed to the Directive 98/34/EC of the European Parliament and Council (2) amended by the Directive 98/48/EC (3). |
— |
Harmonised standards are adopted by the European Standardisation Organisations in English (CEN and CENELEC also published in French and German). Subsequently, the titles of the harmonised standards are translated into all other required official languages of the European Union by the National Standards Bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the Community languages. |
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list. |
— |
More information about harmonised standards on the Internet at: http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European Standards Organisation:
— |
CEN: Avenue Marnix 17, 1000 Brussels, BELGIUM, Tel. +32 25500811; Fax +32 25500819 (http://www.cen.eu) |
— |
CENELEC: Avenue Marnix 17, 1000 Brussels, BELGIUM, Tel. +32 25196871; Fax +32 25196919 (http://www.cenelec.eu) |
— |
ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE, Tel. +33 492944200; Fax +33 493654716 (http://www.etsi.eu). |
(2) OJ L 204, 21.7.1998, p. 37.
(3) OJ L 217, 5.8.1998, p. 18.
NOTICES FROM MEMBER STATES
20.10.2010 |
EN |
Official Journal of the European Union |
C 284/48 |
Information communicated by Member States regarding State aid granted under Commission Regulation (EC) No 800/2008 declaring certain categories of aid compatible with the common market in application of Articles 87 and 88 of the Treaty (General Block Exemption Regulation)
(Text with EEA relevance)
2010/C 284/02
Reference number of the State Aid |
X 328/10 |
||||||
Member State |
Slovenia |
||||||
Member State reference number |
SI |
||||||
Name of the Region (NUTS) |
Slovenia Article 107(3)(a) |
||||||
Granting authority |
|
||||||
Title of the aid measure |
Spodbujanje internacionalizacije podjetij za obdobje 2010 — 2014 |
||||||
National legal basis (Reference to the relevant national official publication) |
Program Vlade RS za spodbujanje internacionalizacije podjetij za obdobje 2010 — 2014 |
||||||
Type of measure |
Scheme - |
||||||
Amendment of an existing aid measure |
— |
||||||
Duration |
29.7.2010—31.12.2013 |
||||||
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
||||||
Type of beneficiary |
SME |
||||||
Annual overall amount of the budget planned under the scheme |
EUR 0,66 (in millions) |
||||||
For guarantees |
— |
||||||
Aid Instrument (Article 5) |
Grant |
||||||
Reference to the Commission Decision |
— |
||||||
If co-financed by Community funds |
— |
||||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||||
Aid for consultancy in favour of SMEs (Art. 26) |
50,00 % |
— |
|||||
Aid for SME participation in fairs (Art. 27) |
50,00 % |
— |
|||||
Specific training (Art. 38(1)) |
25,00 % |
20 % |
|||||
General training (Art. 38(2)) |
60,00 % |
20 % |
Web link to the full text of the aid measure:
http://www.mg.gov.si/fileadmin/mg.gov.si/pageuploads/DEOT/Internacionalizacija_TNI/internacionalizacija_program_deot_100730.pdf
Reference number of the State Aid |
X 329/10 |
|||||
Member State |
Italy |
|||||
Member State reference number |
— |
|||||
Name of the Region (NUTS) |
VALLE D'AOSTA Non-assisted areas |
|||||
Granting authority |
|
|||||
Title of the aid measure |
Piano triennale di politica del lavoro — 2009/2011 |
|||||
National legal basis (Reference to the relevant national official publication) |
1 L. r. 31/3/2003, n. 7: «Disp.in materia di politiche regionali del lavoro, di form. profes. e riorganizzazione dei servizi per l’impiego»; 2 del. Consiglio regionale ogg. n. 668/XIII del 15/7/2009 che approva il Piano triennale di Politica lavoro (PPL) 2009-2011; 3. del. Giunta regionale (DGR) n. 3098 del 6/9/2009 di app. delle istruzioni per fissazione termini e modalità benefici del PPL 2009-2011; 4. DGR n. 1827 del 2/7/2010 che mod. e integr istru ter. e mod. di cui DGR 3098 in 3. |
|||||
Type of measure |
Scheme - |
|||||
Amendment of an existing aid measure |
— |
|||||
Duration |
15.7.2009—31.12.2012 |
|||||
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
|||||
Type of beneficiary |
SME large enterprise |
|||||
Annual overall amount of the budget planned under the scheme |
EUR 0,90 (in millions) |
|||||
For guarantees |
— |
|||||
Aid Instrument (Article 5) |
Grant |
|||||
Reference to the Commission Decision |
— |
|||||
If co-financed by Community funds |
— |
|||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||
SME investment and employment aid (Art. 15) |
20,00 % |
— |
||||
Aid for the recruitment of disadvantaged workers in the form of wage subsidies (Art. 40) |
50,00 % |
— |
||||
Aid for the employment of disabled workers in the form of wage subsidies (Art. 41) |
75,00 % |
— |
||||
Aid for compensating the additional costs of employing disabled workers (Art. 42) |
100,00 % |
— |
Web link to the full text of the aid measure:
|
http://www.regione.vda.it/lavoro/piano_politiche_lavoro_2009_2011_i/piano_triennale_2009_2011_i.asp |
|
http://www.regione.vda.it/lavoro/piano_politiche_lavoro_2009_2011_i/incentivi_disabili_i.asp |
|
http://www.regione.vda.it/lavoro/piano_politiche_lavoro_2009_2011_i/incentivi_assunzione_svantaggiati_i.asp |
Reference number of the State Aid |
X 330/10 |
|||||||||||
Member State |
Cyprus |
|||||||||||
Member State reference number |
25.06.001.792 |
|||||||||||
Name of the Region (NUTS) |
Cyprus Article 107(3)(c) |
|||||||||||
Granting authority |
|
|||||||||||
Title of the aid measure |
Σχέδιο χορηγιών για ενθάρρυνση της χρήσης των ανανεώσιμων πηγών ενέργειας (2010) γα φυσικά και νομικά πρόσωπα καθώς και φορείς του δημόσιου τομέα που ασκούν οικονομική δραστηριότητα |
|||||||||||
National legal basis (Reference to the relevant national official publication) |
Απόφαση του Υπουργικού Συμβουλίου με ημερομηνία 3/6/2010 |
|||||||||||
Type of measure |
Scheme - |
|||||||||||
Amendment of an existing aid measure |
Modification X395/2009 Η Αρμόδια Αρχή επέφερε τις ακόλουθες τροποποιήσεις στο υφιστάμενο μέτρο:
|
|||||||||||
Duration |
3.8.2010—20.12.2013 |
|||||||||||
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
|||||||||||
Type of beneficiary |
SME large enterprise |
|||||||||||
Annual overall amount of the budget planned under the scheme |
EUR 2,50 (in millions) |
|||||||||||
For guarantees |
— |
|||||||||||
Aid Instrument (Article 5) |
Grant |
|||||||||||
Reference to the Commission Decision |
— |
|||||||||||
If co-financed by Community funds |
— |
|||||||||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||||||||
Regional investment and employment aid (Art. 13) Scheme |
15,00 % |
20 % |
Web link to the full text of the aid measure:
http://www.cie.org.cy/PDF/Sxedio_xorhgiwn_gia_nomika-2010.pdf
Reference number of the State Aid |
X 331/10 |
|||||
Member State |
Spain |
|||||
Member State reference number |
ES 51 |
|||||
Name of the Region (NUTS) |
CATALUNA Mixed |
|||||
Granting authority |
|
|||||
Title of the aid measure |
Ayudas para proyectos de inversión en instalaciones de aprovechamiento de la energía solar térmica y de la biomasa leñosa para usos térmicos y en instalaciones de aprovechamiento del biogás, dentro del programa del fomento de las energías renovables |
|||||
National legal basis (Reference to the relevant national official publication) |
Orden ECF/393/2010, de 14 de junio, por la que se aprueban las bases reguladoras en régimen de concurrencia competitiva y en régimen reglado para la concesión de las subvenciones en el marco del programa de energías renovables y se hace pública su convocatoria para el año 2010. |
|||||
Type of measure |
Scheme - |
|||||
Amendment of an existing aid measure |
— |
|||||
Duration |
22.7.2010—30.3.2011 |
|||||
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
|||||
Type of beneficiary |
SME large enterprise |
|||||
Annual overall amount of the budget planned under the scheme |
EUR 1,60 (in millions) |
|||||
For guarantees |
— |
|||||
Aid Instrument (Article 5) |
Grant |
|||||
Reference to the Commission Decision |
— |
|||||
If co-financed by Community funds |
Programa operativo de intervención comunitaria del FEDER en el marco del objetivo de competitividad regional y empleo para la Comunidad Autònoma de Cataluña en España (CCI: 2007ES162PO006) — 0,03 EUR (in millions) |
|||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||
Environmental investment aid for the promotion of energy from renewable energy sources (Art. 23) |
45,00 % |
20 % |
Web link to the full text of the aid measure:
https://www.gencat.cat/eadop/imagenes/5675/10145039.pdf
Reference number of the State Aid |
X 332/10 |
||||
Member State |
Estonia |
||||
Member State reference number |
— |
||||
Name of the Region (NUTS) |
Estonia Article 107(3)(a) |
||||
Granting authority |
|
||||
Title of the aid measure |
Põllumajandustoodetele ja mittepuidulistele metsasaadustele lisandväärtuse andmise investeeringutoetus |
||||
National legal basis (Reference to the relevant national official publication) |
Põllumajandusministri 27. juuli 2010. a määrus nr 85 „Põllumajandustoodetele ja mittepuidulistele metsasaadustele lisandväärtuse andmise investeeringutoetuse saamise nõuded, toetuse taotlemise ja taotluse menetlemise täpsem kord” (RTI, 3.8.2010, 53, 347) |
||||
Type of measure |
Scheme - |
||||
Amendment of an existing aid measure |
— |
||||
Duration |
6.8.2010—31.12.2013 |
||||
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
||||
Type of beneficiary |
SME large enterprise |
||||
Annual overall amount of the budget planned under the scheme |
EEK 111,30 (in millions) |
||||
For guarantees |
— |
||||
Aid Instrument (Article 5) |
Grant |
||||
Reference to the Commission Decision |
— |
||||
If co-financed by Community funds |
Maaelu Arengu Euroopa Põllumajandusfond (EAFRD) — 83,48 EEK (in millions) |
||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||
Regional investment and employment aid (Art. 13) Scheme |
50,00 % |
— |
Web link to the full text of the aid measure:
https://www.riigiteataja.ee/ert/act.jsp?id=13346641
20.10.2010 |
EN |
Official Journal of the European Union |
C 284/54 |
Information communicated by Member States regarding State aid granted under Commission Regulation (EC) No 800/2008 declaring certain categories of aid compatible with the common market in application of Articles 87 and 88 of the Treaty (General Block Exemption Regulation)
(Text with EEA relevance)
2010/C 284/03
Reference number of the State Aid |
X 333/10 |
|||||||
Member State |
Malta |
|||||||
Member State reference number |
SAMB/33/2010 |
|||||||
Name of the Region (NUTS) |
Malta Article 107(3)(a) |
|||||||
Granting authority |
|
|||||||
Title of the aid measure |
Interest Rate Subsidy Scheme for the Refurbishment of Hotels, Accomodation Facilities and Restaurants. |
|||||||
National legal basis (Reference to the relevant national official publication) |
Legal Notice — Loan Interest Rate Subsidy for the Hospitality Sector Regulations, 2010 — issued under the Malta Enterprise Act (Cap 463 of the Laws of Malta). |
|||||||
Type of measure |
Scheme - |
|||||||
Amendment of an existing aid measure |
— |
|||||||
Duration |
1.8.2010—31.12.2013 |
|||||||
Economic sector(s) concerned |
Hotels and similar accommodation, Restaurants and mobile food service activities |
|||||||
Type of beneficiary |
SME large enterprise |
|||||||
Annual overall amount of the budget planned under the scheme |
EUR 6,00 (in millions) |
|||||||
For guarantees |
— |
|||||||
Aid Instrument (Article 5) |
Interest rate subsidy |
|||||||
Reference to the Commission Decision |
— |
|||||||
If co-financed by Community funds |
— |
|||||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||||
Regional investment and employment aid (Art. 13) Scheme |
30,00 % |
20 % |
Web link to the full text of the aid measure:
http://support.maltaenterprise.net/
Reference number of the State Aid |
X 334/10 |
|||||||
Member State |
United Kingdom |
|||||||
Member State reference number |
— |
|||||||
Name of the Region (NUTS) |
SCOTLAND Mixed |
|||||||
Granting authority |
|
|||||||
Title of the aid measure |
Scottish Rural Development Programme — measure code 311 (Diversification into non agricultural activities) |
|||||||
National legal basis (Reference to the relevant national official publication) |
Section 2 (2) of the European Communities Act 1972 |
|||||||
Type of measure |
Scheme - |
|||||||
Amendment of an existing aid measure |
— |
|||||||
Duration |
16.8.2010—31.12.2013 |
|||||||
Economic sector(s) concerned |
Crop and animal production, hunting and related service activities |
|||||||
Type of beneficiary |
SME |
|||||||
Annual overall amount of the budget planned under the scheme |
GBP 4,50 (in millions) |
|||||||
For guarantees |
— |
|||||||
Aid Instrument (Article 5) |
Grant |
|||||||
Reference to the Commission Decision |
— |
|||||||
If co-financed by Community funds |
Council Regulation (EC) 1698/2005 of 20 September 2005 on support for rural development by the European Agricultural Fund for Rural Development (EAFRD) — 2,80 GBP (in millions) |
|||||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||||
Aid for newly created small enterprises (Art. 14) |
20,00 % |
— |
||||||
SME investment and employment aid (Art. 15) |
20,00 % |
— |
Web link to the full text of the aid measure:
http://www.scotland.gov.uk/Topics/farmingrural/SRDP
Reference number of the State Aid |
X 340/10 |
||||
Member State |
Spain |
||||
Member State reference number |
— |
||||
Name of the Region (NUTS) |
GALICIA Article 107(3)(a) |
||||
Granting authority |
|
||||
Title of the aid measure |
Subvenciones a entidades privadas para la potenciación y mejora del turismo mediante ayudas para la mejora de la infraestructura de hoteles (grupo I) de la Comunidad Autónoma de Galicia |
||||
National legal basis (Reference to the relevant national official publication) |
Orden de 21 de abril del 2010 por la que se establecen las bases reguladoras para la concesión, en régimen de concurrencia competitiva, de las subvenciones a entidades privadas para la potenciación y mejora del turismo mediante ayudas para la mejora de la infraestructura de hoteles (grupo I) de la Comunidad Autónoma de Galicia, y se procede a su convocatoria para el año 2010 (CT989A). (DOG No 81, de 30 de abril). Corrección de errores. Orden de 21 de abril del 2010 DOG No 95, de 21de mayo |
||||
Type of measure |
Scheme - |
||||
Amendment of an existing aid measure |
— |
||||
Duration |
1.5.2010—31.12.2013 |
||||
Economic sector(s) concerned |
Hotels and similar accommodation |
||||
Type of beneficiary |
SME large enterprise |
||||
Annual overall amount of the budget planned under the scheme |
EUR 2,00 (in millions) |
||||
For guarantees |
— |
||||
Aid Instrument (Article 5) |
Grant |
||||
Reference to the Commission Decision |
— |
||||
If co-financed by Community funds |
FEDER — 5,60 EUR (in millions) |
||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||
Regional investment and employment aid (Art. 13) Scheme |
40,00 % |
— |
Web link to the full text of the aid measure:
http://www.xunta.es/doc/Dog2010.nsf/a6d9af76b0474e95c1257251004554c3/fff942ba33a2632bc12577140079037c/$FILE/08100D005P089.PDF
http://www.xunta.es/doc/Dog2010.nsf/a6d9af76b0474e95c1257251004554c3/24afbe1f918c895ec125772900649042/$FILE/09500D006P042.PDF
Reference number of the State Aid |
X 341/10 |
|||||||
Member State |
United Kingdom |
|||||||
Member State reference number |
— |
|||||||
Name of the Region (NUTS) |
SCOTLAND Mixed |
|||||||
Granting authority |
|
|||||||
Title of the aid measure |
Scottish Rural Develoment Programme — measure code 123 (adding value to agriculture and forestry products) |
|||||||
National legal basis (Reference to the relevant national official publication) |
Section 2 (2) of the European Communities Act 1972 |
|||||||
Type of measure |
Scheme - |
|||||||
Amendment of an existing aid measure |
— |
|||||||
Duration |
16.8.2010—31.12.2013 |
|||||||
Economic sector(s) concerned |
Manufacture of food products, Manufacture of beverages, Food and beverage service activities |
|||||||
Type of beneficiary |
SME |
|||||||
Annual overall amount of the budget planned under the scheme |
GBP 9,60 (in millions) |
|||||||
For guarantees |
— |
|||||||
Aid Instrument (Article 5) |
Grant |
|||||||
Reference to the Commission Decision |
— |
|||||||
If co-financed by Community funds |
Council Regulation (EC) 1698/2005 OF 20 September 2005 on support for rural development by the European Agricultural Fund for Rural Development (EAFRD) — 5,90 GBP (in millions) |
|||||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||||
SME investment and employment aid (Art. 15) |
20,00 % |
— |
Web link to the full text of the aid measure:
http://www.scotland.gov.uk/Topics/farmingrural/SRDP
Reference number of the State Aid |
X 342/10 |
|||||||
Member State |
United Kingdom |
|||||||
Member State reference number |
— |
|||||||
Name of the Region (NUTS) |
SCOTLAND Mixed |
|||||||
Granting authority |
|
|||||||
Title of the aid measure |
Scottish Rural Development Programme — measure code 111 (vocational training and information actions, including diffusions of scientific knowledge and innovative practises, for persons engaged in the food sector. |
|||||||
National legal basis (Reference to the relevant national official publication) |
Section 2 (2) of the European Communities Act 1972 |
|||||||
Type of measure |
Scheme - |
|||||||
Amendment of an existing aid measure |
— |
|||||||
Duration |
16.8.2010—31.12.2013 |
|||||||
Economic sector(s) concerned |
Food and beverage service activities |
|||||||
Type of beneficiary |
SME large enterprise |
|||||||
Annual overall amount of the budget planned under the scheme |
GBP 6,60 (in millions) |
|||||||
For guarantees |
— |
|||||||
Aid Instrument (Article 5) |
Grant |
|||||||
Reference to the Commission Decision |
— |
|||||||
If co-financed by Community funds |
Council Regulation 1698/2005 of 20 September 2005 on support for rural development by the European Agricultural Fund for Rural Development (EAFRD) — 4,10 GBP (in millions) |
|||||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||||
Specific training (Art. 38(1)) |
25,00 % |
20 % |
||||||
General training (Art. 38(2)) |
60,00 % |
20 % |
Web link to the full text of the aid measure:
http://www.scotland.gov.uk/Topics/farmingrural/SRDP
20.10.2010 |
EN |
Official Journal of the European Union |
C 284/59 |
Information communicated by Member States regarding State aid granted under Commission Regulation (EC) No 800/2008 declaring certain categories of aid compatible with the common market in application of Articles 87 and 88 of the Treaty (General Block Exemption Regulation)
(Text with EEA relevance)
2010/C 284/04
Reference number of the State Aid |
X 343/10 |
|||||||
Member State |
United Kingdom |
|||||||
Member State reference number |
— |
|||||||
Name of the Region (NUTS) |
SCOTLAND Mixed |
|||||||
Granting authority |
|
|||||||
Title of the aid measure |
Scottish Rural Development Programme — measure code 331 (Training and information for economic actors in the fields covered by axis 3) |
|||||||
National legal basis (Reference to the relevant national official publication) |
Section 2 (2) of the European Communities Act 1972 |
|||||||
Type of measure |
Scheme - |
|||||||
Amendment of an existing aid measure |
— |
|||||||
Duration |
16.8.2010—31.12.2013 |
|||||||
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
|||||||
Type of beneficiary |
SME large enterprise |
|||||||
Annual overall amount of the budget planned under the scheme |
GBP 1,10 (in millions) |
|||||||
For guarantees |
— |
|||||||
Aid Instrument (Article 5) |
Grant |
|||||||
Reference to the Commission Decision |
— |
|||||||
If co-financed by Community funds |
Coumcil Regulation 1698/2005 of 20 September 2005 on support for rural development by the European Agricultural Fund for Rural Development (EAFRD) — 0,60 GBP (in millions) |
|||||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||||
Specific training (Art. 38(1)) |
25,00 % |
20 % |
||||||
General training (Art. 38(2)) |
60,00 % |
20 % |
Web link to the full text of the aid measure:
http://www.scotland.gov.uk/Topics/farmingrural/SRDP
Reference number of the State Aid |
X 344/10 |
|||||||
Member State |
United Kingdom |
|||||||
Member State reference number |
— |
|||||||
Name of the Region (NUTS) |
NORTH EAST, NORTH WEST, YORKSHIRE AND THE HUMBER, EAST MIDLANDS, WEST MIDLANDS, EASTERN, LONDON, SOUTH EAST, SOUTH WEST Mixed |
|||||||
Granting authority |
|
|||||||
Title of the aid measure |
19+ Work Based Learning Programmes |
|||||||
National legal basis (Reference to the relevant national official publication) |
Learning and Skills Act 2000 http://www.opsi.gov.uk/Acts/acts2000/en/ukpgaen_20000021_en_1 |
|||||||
Type of measure |
Scheme - |
|||||||
Amendment of an existing aid measure |
— |
|||||||
Duration |
1.8.2010—31.12.2012 |
|||||||
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
|||||||
Type of beneficiary |
SME large enterprise |
|||||||
Annual overall amount of the budget planned under the scheme |
GBP 122,00 (in millions) |
|||||||
For guarantees |
— |
|||||||
Aid Instrument (Article 5) |
Grant |
|||||||
Reference to the Commission Decision |
— |
|||||||
If co-financed by Community funds |
— |
|||||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||||
Specific training (Art. 38(1)) |
25,00 % |
20 % |
||||||
General training (Art. 38(2)) |
60,00 % |
20 % |
Web link to the full text of the aid measure:
http://skillsfundingagency.bis.gov.uk/publications/latest/Detail.htm?id=16ee1365-b416-4287-8a59-cd3900bf10a3
Reference number of the State Aid |
X 345/10 |
||||
Member State |
Romania |
||||
Member State reference number |
RO |
||||
Name of the Region (NUTS) |
Nord-Est, Sud-Est, Sud, Sud-Vest, Vest, Nord-Vest, Centru, Bucuresti Article 107(3)(a) |
||||
Granting authority |
|
||||
Title of the aid measure |
Schema de ajutor de stat pentru dezvoltare regională prin crearea și dezvoltarea structurilor de sprijinire a afacerilor din cadrul Programului Operațional Regional 2007-2013 |
||||
National legal basis (Reference to the relevant national official publication) |
Ordinul Ministrului dezvoltării regionale și turismului Nr. 1878 din 20 iulie 2010 |
||||
Type of measure |
Scheme - |
||||
Amendment of an existing aid measure |
Modification XR85/2008 Da Prolongation XR85/2008 Da |
||||
Duration |
28.7.2010—31.12.2013 |
||||
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
||||
Type of beneficiary |
SME large enterprise |
||||
Annual overall amount of the budget planned under the scheme |
ROL 603,95 (in millions) |
||||
For guarantees |
— |
||||
Aid Instrument (Article 5) |
Grant |
||||
Reference to the Commission Decision |
— |
||||
If co-financed by Community funds |
Fondul European de Dezvoltare Regionala (FEDR) — 1 939,87 ROL (in millions) |
||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||
Regional investment and employment aid (Art. 13) Scheme |
50,00 % |
— |
Web link to the full text of the aid measure:
http://www.inforegio.ro/index.php?page=STATE_AID
Reference number of the State Aid |
X 347/10 |
|||||
Member State |
Latvia |
|||||
Member State reference number |
— |
|||||
Name of the Region (NUTS) |
Latvia Article 107(3)(a) |
|||||
Granting authority |
|
|||||
Title of the aid measure |
Aktīvais nodarbinātības pasākums noteiktām personu grupām |
|||||
National legal basis (Reference to the relevant national official publication) |
Ministru kabineta 2008.gada 10.marta noteikumi Nr.166 “Noteikumi par aktīvo nodarbinātības pasākumu un preventīvo bezdarba samazināšanas pasākumu organizēšanas un finanšēšanas kārtību un pasākumu īstenotāju izvēles principiem”. Publicēts: Latvijas Vēstnesis, 25.3.2008. nr.46 2009, 9., 37., 125., 130., 135.nr.; 2010, 34.nr., nr.108 |
|||||
Type of measure |
Scheme - |
|||||
Amendment of an existing aid measure |
Prolongation X363/2009 Atbalsta programma tiek pagarināta līdz 31.12.2013. |
|||||
Duration |
1.1.2010—31.12.2013 |
|||||
Economic sector(s) concerned |
All economic sectors eligible to receive aid |
|||||
Type of beneficiary |
SME large enterprise |
|||||
Annual overall amount of the budget planned under the scheme |
LVL 1,00 (in millions) |
|||||
For guarantees |
— |
|||||
Aid Instrument (Article 5) |
Grant |
|||||
Reference to the Commission Decision |
— |
|||||
If co-financed by Community funds |
— |
|||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
||||
Aid for the recruitment of disadvantaged workers in the form of wage subsidies (Art. 40) |
50,00 % |
— |
Web link to the full text of the aid measure:
http://www.likumi.lv/doc.php?id=172806
Reference number of the State Aid |
X 348/10 |
||||||
Member State |
Latvia |
||||||
Member State reference number |
— |
||||||
Name of the Region (NUTS) |
Latvia Article 107(3)(a) |
||||||
Granting authority |
|
||||||
Title of the aid measure |
Investīciju aizdevumi komersantu konkurētspējas uzlabošanai |
||||||
National legal basis (Reference to the relevant national official publication) |
Ministru kabineta 17.2.2009. noteikumi nr. 164 “Noteikumi par aizdevumiem komersantu konkurētspējas uzlabošanai” |
||||||
Type of measure |
Scheme - |
||||||
Amendment of an existing aid measure |
Modification X399/2009 Grozījumi atbalsta programmā “Aizdevumi komersantu konkurētspējas uzlabošanai” paredz palielināt maksimālo kopējo aizdevuma summu vienam komersantam no LVL 6 000 000 uz LVL 7 500 000, samazināt minimālo investīciju aizdevuma summu no EUR 500 000 uz LVL 200 000, un papildināt neatbalstāmo nozaru sarakstu ar elektroenerģijas un siltumapgādes nozari, izņemot projektus šīs nozares ietvaros, kuri tiek līdzfinansēti no Kohēzijas fonda. |
||||||
Duration |
28.7.2010—31.12.2013 |
||||||
Economic sector(s) concerned |
Forestry and logging, Extraction of crude petroleum and natural gas, Mining of metal ores, Other mining and quarrying, Mining support service activities, Processing and preserving of meat and production of meat products, Processing and preserving of fruit and vegetables, Manufacture of vegetable and animal oils and fats, Manufacture of grain mill products, starches and starch products, Manufacture of bakery and farinaceous products, Manufacture of other food products, Manufacture of prepared animal feeds, Manufacture of beverages, Manufacture of textiles, Manufacture of wearing apparel, Manufacture of leather and related products, Manufacture of wood and of products of wood and cork, except furniture; manufacture of articles of straw and plaiting materials, Manufacture of paper and paper products, Printing and reproduction of recorded media, Manufacture of coke and refined petroleum products, Manufacture of basic chemicals, fertilisers and nitrogen compounds, plastics and synthetic rubber in primary forms, Manufacture of pesticides and other agrochemical products, Manufacture of paints, varnishes and similar coatings, printing ink and mastics, Manufacture of soap and detergents, cleaning and polishing preparations, perfumes and toilet preparations, Manufacture of other chemical products, Manufacture of basic pharmaceutical products and pharmaceutical preparations, Manufacture of rubber and plastic products, Manufacture of other non-metallic mineral products, Manufacture of structural metal products, Manufacture of tanks, reservoirs and containers of metal, Manufacture of steam generators, except central heating hot water boilers, Forging, pressing, stamping and roll-forming of metal; powder metallurgy, Treatment and coating of metals; machining, Manufacture of cutlery, tools and general hardware, Manufacture of other fabricated metal products, Manufacture of computer, electronic and optical products, Manufacture of electrical equipment, Manufacture of machinery and equipment n.e.c. Manufacture of motor vehicles, trailers and semi-trailers, Manufacture of railway locomotives and rolling stock, Manufacture of air and spacecraft and related machinery, Manufacture of military fighting vehicles, Manufacture of transport equipment n.e.c., Manufacture of furniture, Other manufacturing, Repair and installation of machinery and equipment, ELECTRICITY, GAS, STEAM AND AIR CONDITIONING SUPPLY, Water collection, treatment and supply, Sewerage, Waste collection, Materials recovery, CONSTRUCTION, Accommodation, Publishing of books, periodicals and other publishing activities, Computer programming, consultancy and related activities, Information service activities, PUBLIC ADMINISTRATION AND DEFENCE; COMPULSORY SOCIAL SECURITY, ACTIVITIES OF EXTRATERRITORIAL ORGANISATIONS AND BODIES |
||||||
Type of beneficiary |
SME large enterprise |
||||||
Annual overall amount of the budget planned under the scheme |
LVL 8,70 (in millions) |
||||||
For guarantees |
— |
||||||
Aid Instrument (Article 5) |
Loan |
||||||
Reference to the Commission Decision |
— |
||||||
If co-financed by Community funds |
2.2.1.4. aktivitāte — Aizdevumi komersantu konkurētspējas uzlabošanai. Tiks līdzfinansēta no ERAF līdzekļiem. — 40,31 LVL (in millions) |
||||||
Objectives |
Maximum aid intensity in % or Maximum aid amount in national currency |
SME-bonuses in % |
|||||
Regional investment and employment aid (Art. 13) Scheme |
15,00 % |
— |
Web link to the full text of the aid measure:
http://likumi.lv/doc.php?id=188596