31.3.2005

Official Journal of the European Union

C 77/2

Notice of initiation of an anti-dumping proceeding concerning imports of certain seamless pipes and tubes, of iron or steel originating in Croatia, Romania, Russia and Ukraine, of the initiation of an interim review of the anti-dumping duties on imports of certain seamless pipes and tubes of iron or non-alloy steel originating, inter alia , in Russia and Romania and of the initiation of an interim review of the anti-dumping duty on imports of certain seamless pipes and tubes of iron or non-alloy steel originating in Croatia and Ukraine

(2005/C 77/02)

The Commission has received a complaint pursuant to Article 5 of Council Regulation (EC) No 384/96 (1) (‘the basic Regulation’), alleging that imports of certain seamless pipes and tubes, of iron or steel, originating in Croatia, Romania, Russia and Ukraine (‘the countries concerned’), are being dumped and are thereby causing material injury to the Community industry.

1. Complaint

The complaint was lodged on 14 February 2005 by the Defence Committee of the Seamless Steel Tubes Industry of the European Union (‘the complainant’) on behalf of producers representing a major proportion, in this case more than 50 %, of the total Community production of certain seamless pipes and tubes, of iron or steel.

2. Product

The product allegedly being dumped is certain seamless pipes and tubes, of iron or steel, of circular cross-section of an external diameter not exceeding 406,4 mm with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis originating in Croatia, Romania, Russia and Ukraine (‘the product concerned’), normally declared within CN codes ex 7304 10 10, ex 7304 10 30, ex 7304 21 00, ex 7304 29 11, ex 7304 31 99, ex 7304 39 59, 7304 39 91, 7304 39 93, ex 7304 51 99, ex 7304 59 91 and ex 7304 59 93. These CN codes are only given for information.

This product also includes the product covered by Council Regulations (EC) No 2320/97 and (EC) No 348/2000, which is subject to an interim review as specified under section 10 of this note, i.e. certain seamless pipes and tubes of iron or non-alloy steel originating in Croatia, Romania, Russia and Ukraine and falling within CN Codes 7304 10 10, 7304 10 30, 7304 31 99, 7304 39 91 and 7304 39 93.

3. Allegation of dumping

The allegation of dumping for Croatia, Romania and Russia is based on a comparison of a constructed normal value with the export prices of the product concerned to the Community.

In view of the provisions of Article 2(7) of the basic Regulation, the complainant established normal value for Ukraine on the basis of a constructed normal value in a market economy country, which is mentioned in paragraph 5.1(d) of this notice. The allegation of dumping is based on a comparison of normal value, thus calculated, with the export prices of the product concerned when sold for export to the Community.

On this basis, the dumping margins calculated are significant for all exporting countries concerned.

4. Allegation of injury

The complainant has provided evidence that imports of the product concerned from Croatia, Romania, Russia and Ukraine have individually and overall a significant market share in the Community and have even increased in terms of market share.

It is alleged that the volumes and the prices of the imported product concerned have, among other consequences, had a negative impact on the quantities sold and the level of prices charged by the Community industry, resulting in substantial adverse effects on the overall performance, the financial situation and the employment situation of the Community industry.

5. Procedure

Having determined, after consulting the Advisory Committee, that the complaint has been lodged by or on behalf of the Community industry and that there is sufficient evidence to justify the initiation of a proceeding, the Commission hereby initiates an investigation pursuant to Article 5 of the basic Regulation.

5.1. Procedure for the determination of dumping and injury

The investigation will determine whether the product concerned originating in Croatia, Romania, Russia and Ukraine is being dumped and whether this dumping has caused injury.

(a) Sampling

In view of the apparent large number of parties involved in this proceeding, the Commission may decide to apply sampling in accordance with Article 17 of the basic Regulation.

(i) Sampling for exporters/producers in Russia and Ukraine

In order to enable the Commission to decide whether sampling is necessary and, if so, to select a sample, all exporters/producers, or representatives acting on their behalf, are hereby requested to make themselves known by contacting the Commission and providing the following information on their company or companies within the time limit set in paragraph 6(b)(i) and in the format indicated in paragraph 7 of this notice:

—	name, address, e-mail address, telephone, and fax, and/or telex numbers and contact person,

—	the turnover in local currency and the volume in tonnes of the product concerned sold for export to the Community during the period 1 January 2004 to 31 December 2004,

—	the turnover in local currency and the sales volume in tonnes for the product concerned on the domestic market during the period 1 January 2004 to 31 December 2004,

—	whether the company intends to claim an individual margin (2) (individual margins can only be claimed by producers),

—	the precise activities of the company with regard to the production of the product concerned,

—	the names and the precise activities of all related companies (3) involved in the production and/or selling (export and/or domestic) of the product concerned,

—	any other relevant information that would assist the Commission in the selection of the sample,

—	an indication of whether the company or companies agree to their inclusion in the sample, which implies replying to a questionnaire and accepting an on-the-spot investigation of their response.

In order to obtain the information it deems necessary for the selection of the sample of exporters/producers, the Commission will, in addition, contact the authorities of the exporting countries, and any known associations of exporters/producers.

(ii) Sampling for importers

In order to enable the Commission to decide whether sampling is necessary and, if so, to select a sample, all importers, or representatives acting on their behalf, are hereby requested to make themselves known to the Commission and to provide the following information on their company or companies within the time limit set in paragraph 6(b)(i) and in the formats indicated in paragraph 7 of this notice:

—	name, address, e-mail address, telephone, and fax, and/or telex numbers and contact person,

—	the total turnover in euro of the company during the period 1 January 2004 to 31 December 2004,

—	the total number of employees,

—	the precise activities of the company with regard to the product concerned,

—	the volume in tonnes and value in euro of imports into and resales made in the Community market during the period 1 January 2004 to 31 December 2004 of the imported product concerned originating in Croatia, Romania, Russia and Ukraine,

—	the names and the precise activities of all related companies (3) involved in the production and/or selling of the product concerned,

—	any other relevant information that would assist the Commission in the selection of the sample,

—	an indication of whether the company or companies agree to their inclusion in the sample, which implies replying to a questionnaire and accepting an on-the-spot investigation of their response.

In order to obtain the information it deems necessary for the selection of the sample of importers, the Commission will, in addition, contact any known associations of importers.

(iii) Sampling for Community producers

In view of the large number of Community producers supporting the complaint, the Commission intends to investigate injury to the Community industry by applying sampling.

In order to enable the Commission to select a sample, all Community producers are hereby requested to provide the following information on their company or companies within the time limit set in paragraph 6(b)(i) of this notice:

—	name, address, e-mail address, telephone, and fax, and/or telex numbers and contact person,

—	the total turnover in euro of the company during the period 1 January 2004 to 31 December 2004,

—	the precise activities of the company with regard to the production of the product concerned,

—	the value in euro of sales of the product concerned made in the Community market during the period 1 January 2004 to 31 December 2004,

—	the volume in tonnes of sales of the product concerned made in the Community market during the period 1 January 2004 to 31 December 2004,

—	the volume in tonnes of the production of the product concerned during the period 1 January 2004 to 31 December 2004,

—	the names and the precise activities of all related companies (3) involved in the production and/or selling of the product concerned,

—	any other relevant information that would assist the Commission in the selection of the sample,

—	an indication of whether the company or companies agree to their inclusion in the sample, which implies replying to a questionnaire and accepting an on-the-spot investigation of their response.

(iv) Final selection of the samples

All interested parties wishing to submit any relevant information regarding the selection of the samples must do so within the time limit set in paragraph 6(b)(ii) of this notice.

The Commission intends to make the final selection of the samples after having consulted the parties concerned that have expressed their willingness to be included in the sample.

Companies included in the samples must reply to a questionnaire within the time limit set in paragraph 6(b)(iii) of this notice and must cooperate within the framework of the investigation.

If sufficient cooperation is not forthcoming, the Commission may base its findings, in accordance with Articles 17(4) and 18 of the basic Regulation, on the facts available. A finding based on facts available may be less advantageous to the party concerned, as explained in paragraph 8 of this notice.

(b) Questionnaires

In order to obtain the information it deems necessary for its investigation, the Commission will send questionnaires to the sampled Community industry and to any association of producers in the Community, to the sampled exporters/producers in Russia and Ukraine, to the exporters/producers in Croatia and Romania, to any association of exporters/producers, to the sampled importers, to any association of importers named in the complaint, and to the authorities of the exporting countries concerned.

(i) Exporters/producers in Croatia and Romania and importers

All such interested parties should contact the Commission forthwith by fax, but not later than the time limit set out in paragraph 6(a)(i) of this notice, in order to find out whether they are listed in the complaint and, if necessary, request a questionnaire, given that the time limit set in paragraph 6(a)(ii) of this notice applies to all such interested parties.

(ii) Exporters/producers claiming an individual margin in Russia and Ukraine

Exporters/producers in Russia and Ukraine claiming an individual margin, with a view to the application of Articles 17(3) and 9(6) of the basic Regulation, must submit a completed questionnaire within the time limit set in paragraph 6(a)(ii) of this notice. They therefore have to request a questionnaire within the time limit set in paragraph 6(a)(i) of this notice. However, such parties should be aware that if sampling is applied to exporters/producers, the Commission may nonetheless decide not to calculate an individual margin for them, if the number of exporters/producers is so large that individual examination would be unduly burdensome and would prevent the timely completion of the investigation.

All interested parties are hereby invited to make their views known, submit information other than questionnaire replies and to provide supporting evidence. This information and supporting evidence has to reach the Commission within the time limit set in paragraph 6(a)(ii) of this notice.

Furthermore, the Commission may hear interested parties, provided that they make a request showing that there are particular reasons why they should be heard. This request must be made within the time limit set in paragraph 6(a)(iii) of this notice.

(d) Selection of the market economy country

In accordance with Article 2(7)(a) of the basic Regulation, it is envisaged to choose Romania as an appropriate market economy country for the purpose of establishing normal value in respect of Ukraine. Interested parties are hereby invited to comment on the appropriateness of this choice within the specific time limit set in paragraph 6(c) of this notice.

(e) Market economy status

For those exporters/producers in Ukraine who claim and provide sufficient evidence that they operate under market economy conditions, i.e. that they meet the criteria laid down in Article 2(7)(c) of the basic Regulation, normal value will be determined in accordance with Article 2(7)(b) of the basic Regulation. Exporters/producers intending to submit duly substantiated claims must do so within the specific time limit set in paragraph 6(d) of this notice. The Commission will send claim forms to all exporters/producers in Ukraine named in the complaint and to any association of exporters/producers named in the complaint, as well as to the authorities of Ukraine.

5.2. Procedure for assessment of Community interest

In accordance with Article 21 of the basic Regulation and in the event that the allegations of dumping and injury caused thereby are substantiated, a decision will be reached as to whether the adoption of anti-dumping measures would not be against the Community interest. For this reason the Community industry, importers, their representative associations, representative users and representative consumer organisations, provided that they prove that there is an objective link between their activity and the product concerned, may, within the general time limits set in paragraph 6(a)(ii) of this notice, make themselves known and provide the Commission with information. The parties which have acted in conformity with the precedent sentence may request a hearing setting the particular reasons why they should be heard within the time limit set in paragraph 6(a)(iii) of this notice. It should be noted that any information submitted pursuant to Article 21 will only be taken into account if supported by factual evidence at the time of submission.

6. Time limits

(a) General time limits

(i) For parties to request a questionnaire or other claim forms

All interested parties should request a questionnaire or other claim forms as soon as possible, but not later than 10 days after the publication of this notice in the Official Journal of the European Union.

(ii) For parties to make themselves known, to submit questionnaire replies and any other information

All interested parties, if their representations are to be taken into account during the investigation, must make themselves known by contacting the Commission, present their views and submit questionnaire replies or any other information within 40 days of the date of publication of this notice in the Official Journal of the European Union, unless otherwise specified. Attention is drawn to the fact that the exercise of most procedural rights set out in the basic Regulation depends on the party's making itself known within the aforementioned period.

Companies selected in a sample must submit questionnaire replies within the time limits specified in paragraph 6(b)(iii) of this notice.

(iii) Hearings

All interested parties may also apply to be heard by the Commission within the same 40 day time limit.

(b) Specific time limit in respect of sampling

(i)

The information specified in paragraph 5.1(a)(i), 5.1(a)(ii) and 5.1 (a)(iii) should reach the Commission within 15 days of the date of publication of this notice in the Official Journal of the European Union, given that the Commission intends to consult parties concerned that have expressed their willingness to be included in the sample on its final selection within a period of 21 days of the publication of this notice in the Official Journal of the European Union.

(ii)	All other information relevant for the selection of the sample as referred to in 5.1(a) (iv) must reach the Commission within a period of 21 days of the publication of this notice in the Official Journal of the European Union.

(iii)

The questionnaire replies from sampled parties must reach the Commission within 37 days from the date of the notification of their inclusion in the sample.

Parties to the investigation may wish to comment on the appropriateness of Romania which, as mentioned in paragraph 5.1(d) of this notice, is envisaged as a market-economy country for the purpose of establishing normal value in respect of Ukraine. These comments must reach the Commission within 10 days of the date of publication of this notice in the Official Journal of the European Union.

(d) Specific time limit for submission of claims for market economy status and/or for individual treatment

Duly substantiated claims for market economy status (as mentioned in paragraph 5.1(e) of this notice) and/or for individual treatment pursuant to Article 9(5) of the basic Regulation, must reach the Commission within 15 days of the date of publication of this notice in the Official Journal of the European Union.

7. Written submissions, questionnaire replies and correspondence

All submissions and requests made by interested parties must be made in writing (not in electronic format, unless otherwise specified) and must indicate the name, address, e-mail address, telephone and fax, and/or telex numbers of the interested party. All written submissions, including the information requested in this notice, questionnaire replies and correspondence provided by interested parties on a confidential basis shall be labelled as ‘Limited (4)’ and, in accordance with Article 19(2) of the basic Regulation, shall be accompanied by a non-confidential version, which will be labelled ‘For inspection by interested parties’.

Commission address for correspondence:

European Commission

Directorate General for Trade

Directorate B

Office: J-79 5/16

B-1049 Brussels

Fax (32-2) 295 65 05

8. Non-cooperation

In cases in which any interested party refuses access to or does not provide the necessary information within the time limits, or significantly impedes the investigation, provisional or final findings, affirmative or negative, may be made in accordance with Article 18 of the basic Regulation, on the basis of the facts available.

Where it is found that any interested party has supplied false or misleading information, the information shall be disregarded and use may be made of the facts available. If an interested party does not cooperate or cooperates only partially and findings are therefore based on facts available in accordance with Article 18 of the basic Regulation, the result may be less favourable to that party than if it had cooperated.

9. Schedule of the investigation

The investigation will be concluded, according to Article 6(9) of the basic Regulation within 15 months of the date of the publication of this notice in the Official Journal of the European Union. According to Article 7(1) of the basic Regulation, provisional measures may be imposed no later than 9 months from the publication of this notice in the Official Journal of the European Union.

10. Review of existing measures

By Council Regulation (EC) No 2320/97 (5) definitive anti-dumping duties were imposed on imports of certain seamless pipes and tubes of iron or non-alloy steel originating inter alia in Russia and Romania, falling within CN codes 7304 10 10, 7304 10 30, 7304 31 99, 7304 39 91 and 7304 39 93.

By Council Regulation (EC) No 348/2000 (6) a definitive anti-dumping duty was imposed on imports of certain seamless pipes and tubes of iron or non-alloy steel originating in Croatia and Ukraine, falling within CN codes 7304 10 10, 7304 10 30, 7304 31 99, 7304 39 91 and 7304 39 93.

Should it be determined that measures are to be imposed on certain seamless pipes and tubes of iron or steel originating in Croatia, Romania, Russia and Ukraine in the proceeding initiated by the present notice, and thus cover the seamless pipes and tubes of iron or non-alloy steel the continued imposition of the measures imposed by Council Regulations (EC) No 2320/97 and 348/2000 will be no longer appropriate, and those regulations would have to be amended or repealed accordingly. Therefore, an interim review should be opened as regards Regulations (EC) No 2320/97 and 348/2000 in order to allow any amendment or repeal necessary in the light of the investigation initiated by the present notice.

Therefore, the Commission hereby initiates, pursuant to Article 11(3) of the basic Regulation, an interim review of Regulation (EC) No 2320/97 and Regulation (EC) No 348/2000. The provisions set out in points 5, 6, 7 and 8 of the notice, apply mutatis mutandis to these interim reviews.

(1) OJ L 56, 6.3.1996, p. 1. Regulation as last amended by Council Regulation (EC) No 461/2004 (OJ L 77, 13.3.2004, p. 12).

(2) Individual margins may be claimed pursuant to Article 17(3) of the basic Regulation for companies not included in the sample, Article 9(5) of the basic Regulation concerning individual treatment in cases involving non market economy countries/economies in transition, and Article 2(7)(b) of the basic Regulation for companies claiming market economy status. Note that claims for individual treatment necessitate an application pursuant to Article 9(5) of the basic Regulation and that claims regarding market economy status necessitate an application pursuant to Article 2(7)(b) of the basic Regulation.

(3) For guidance on the meaning of related companies, please refer to Article 143 of Commission Regulation (EEC) No 2454/93 concerning the implementation of the Community Customs Code (OJ L 253, 11.10.1993, p. 1).

(4) This means that the document is for internal use only. It is protected pursuant to Article 4 of Regulation (EC) No 1049/2001 of the European Parliament and of the Council (OJ L 145, 31.5.2001, p. 43). It is a confidential document pursuant to Article 19 of Council Regulation (EC) No 384/96 (OJ L 56, 6.3.1996, p. 1) and Article 6 of the WTO Agreement on Implementation of Article VI of the GATT 1994 (Anti-Dumping Agreement).

(5) OJ L 322, 25.11.1997, p. 1 as last amended by Council Regulation (EC) No 1322/2004 (OJ L 246, 20.7.2004, p. 10).

(6) OJ L 45, 17.2.2000, p. 1 as last amended by Council Regulation (EC) No 258/2005 (OJ L 46, 17.2.2005, p. 7).

31.3.2005

Official Journal of the European Union

C 77/8

Commission communication in the framework of the implementation of the Council directive 89/336/EEC

(2005/C 77/03)

(Text with EEA relevance)

(Publication of titles and references of harmonized standards under the directive)

European Standardisation Organisation	Reference and title of the standard (and reference document)	Reference of the superseded standard	Date of cessation of presumption of conformity of the superseded standard Note 1
CENELEC	EN 50065-1:2001 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 1: General requirements, frequency bands and electromagnetic disturbances	EN 50065-1:1991 +A1:1992 +A2:1995 +A3:1996 Note 2.1	Date expired (1.4.2003)
CENELEC	EN 50065-2-1:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments	Relevant generic standard(s) Note 2.3	Date expired (1.10.2004)
CENELEC	EN 50065-2-2:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments	Relevant generic standard(s) Note 2.3	Date expired (1.10.2004)
CENELEC	EN 50065-2-3:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors	Relevant generic standard(s) Note 2.3	Date expired (1.8.2004)
CENELEC	EN 50083-2:2001 Cable networks for television signals, sound signals and interactive services — Part 2: Electromagnetic compatibility for equipment	EN 50083-2:1995 +A1:1997 Note 2.1	Date expired (1.1.2004)
CENELEC	EN 50090-2-2:1996 Home and Building Electronic Systems (HBES) — Part 2-2: System overview — General technical requirements	Relevant generic standard(s) Note 2.3	Date expired (1.10.1999)
CENELEC	EN 50091-2:1995 Uninterruptible power systems (UPS) — Part 2: EMC requirements	Relevant generic standard(s) Note 2.3	Date expired (1.3.1999)
CENELEC	EN 50130-4:1995 Alarm systems — Part 4: Electromagnetic compatibility — Product family standard: Immunity requirements for components of fire, intruder and social alarm systems	Relevant generic standard(s) Note 2.3	Date expired (1.1.2001)
	Amendment A1:1998 to EN 50130-4:1995	Note 3	Date expired (1.1.2001)
	Amendment A2:2003 to EN 50130-4:1995	Note 3	1.9.2007
CENELEC	EN 50148:1995 Electronic taximeters	Relevant generic standard(s) Note 2.3	Date expired (15.12.1995)
CENELEC	EN 50199:1995 Electromagnetic compatibility (EMC) — Product standard for arc welding equipment	Relevant generic standard(s) Note 2.3	Date expired (1.7.1996)
CENELEC	EN 50263:1999 Electromagnetic compatibility (EMC) — Product standard for measuring relays and protection equipment	Relevant generic standard(s) Note 2.3	Date expired (1.8.2002)
CENELEC	EN 50270:1999 Electromagnetic compatibility — Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen	Relevant generic standard(s) Note 2.3	Date expired (1.10.2001)
CENELEC	EN 50293:2000 Electromagnetic compatibility — Road traffic signal systems — Product standard	Relevant generic standard(s) Note 2.3	Date expired (1.4.2003)
CENELEC	EN 50295:1999 Low-voltage switchgear and controlgear — Controller and device interface systems — Actuator Sensor interface (AS-i)	Relevant generic standard(s) Note 2.3	Date expired (1.12.1999)
CENELEC	EN 50370-2:2003 Electromagnetic compatibility (EMC) — Product family standard for machine tools — Part 2: Immunity	Relevant generic standard(s) Note 2.3	1.11.2005
CENELEC	EN 55011:1998 Industrial, scientific and medical (ISM) radio-frequency equipment — Radio disturbance characteristics — Limits and methods of measurement (CISPR 11:1997 (Modified))	EN 55011:1991 +A1:1997 +A2:1996 Note 2.1	Date expired (1.1.2001)
	Amendment A1:1999 to EN 55011:1998 (CISPR 11:1997/A1:1999)	Note 3	Date expired (1.8.2002)
	Amendment A2:2002 to EN 55011:1998 (CISPR 11:1997/A2:2002)	Note 3	1.10.2005
CENELEC	EN 55012:2002 Vehicles, boats and internal combustion engine driven devices — Radio disturbance characteristics — Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices (CISPR 12:2001) Note 8	Relevant generic standard(s) Note 2.3	Date expired (1.2.2005)
CENELEC	EN 55013:2001 Sound and television broadcast receivers and associated equipment — Radio disturbance characteristics — Limits and methods of measurement (CISPR 13:2001 (Modified))	EN 55013:1990 +A12:1994 +A13:1996 +A14:1999 Note 2.1	Date expired (1.9.2004)
CENELEC	Amendment A1:2003 to EN 55013:2001 (CISPR 13:2001/A1:2003)	Note 3	1.4.2006
CENELEC	EN 55014-1:2000 Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus — Part 1: Emission (CISPR 14-1:2000)	EN 55014-1:1993 +A1:1997 +A2:1999 Note 2.1	Date expired (1.8.2003)
	Amendment A1:2001 to EN 55014-1:2000 (CISPR 14-1:2000/A1:2001)	Note 3	Date expired (1.10.2004)
	Amendment A2:2002 to EN 55014-1:2000 (CISPR 14-1:2000/A2:2002)	Note 3	1.10.2005
CENELEC	EN 55014-2:1997 Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus — Part 2: Immunity — Product family standard (CISPR 14-2:1997)	EN 55104:1995 Note 2.1	Date expired (1.1.2001)
CENELEC	Amendment A1:2001 to EN 55014-2:1997 (CISPR 14-2:1997/A1:2001)	Note 3	Date expired (1.12.2004)
CENELEC	EN 55015:2000 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (CISPR 15:2000)	EN 55015:1996 +A1:1997 +A2:1999 Note 2.1	Date expired (1.8.2003)
	Amendment A1:2001 to EN 55015:2000 (CISPR 15:2000/A1:2001)	Note 3	Date expired (1.12.2004)
	Amendment A2:2002 to EN 55015:2000 (CISPR 15:2000/A2:2002)	Note 3	1.10.2005
CENELEC	EN 55020:1994 Electromagnetic immunity of broadcast receivers and associated equipment	EN 55020:1988 Note 2.1	Date expired (31.12.1998)
	Amendment A11:1996 to EN 55020:1994	Note 3	Date expired (1.6.1999)
	Amendment A13:1999 to EN 55020:1994	Note 3	Date expired (1.8.2001)
	Amendment A14:1999 to EN 55020:1994	Note 3	Date expired (1.8.2001)
	Amendment A12:1999 to EN 55020:1994	Note 3	Date expired (1.8.2002)
CENELEC	EN 55020:2002 Sound and television broadcast receivers and associated equipment — Immunity characteristics — Limits and methods of measurement (CISPR 20:2002)	EN 55020:1994 and its amendments Note 2.1	1.12.2005
CENELEC	Amendment A1:2003 to EN 55020:2002 (CISPR 20:2002/A1:2002)	Note 3	1.12.2005
CENELEC	EN 55022:1994 Limits and methods of measurement of radio disturbance characteristics of information technology equipment (CISPR 22:1993)	EN 55022:1987 Note 2.1	Date expired (31.12.1998)
	Amendment A1:1995 to EN 55022:1994 (CISPR 22:1993/A1:1995)	Note 3	Date expired (31.12.1998)
	Amendment A2:1997 to EN 55022:1994 (CISPR 22:1993/A2:1996 (Modified))	Note 3	Date expired (31.12.1998)
CENELEC	EN 55022:1998 Information technology equipment — Radio disturbance characteristics — Limits and methods of measurement (CISPR 22:1997 (Modified))	EN 55022:1994 and its amendments Note 2.1	1.8.2007
	Amendment A1:2000 to EN 55022:1998 (CISPR 22:1997/A1:2000)	Note 3	1.8.2005
	Amendment A2:2003 to EN 55022:1998 (CISPR 22:1997/A2:2002)	Note 3	1.12.2005
CENELEC	EN 55024:1998 Information technology equipment — Immunity characteristics — Limits and methods of measurement (CISPR 24:1997 (Modified))	Relevant generic standard(s) Note 2.3	Date expired (1.7.2001)
	Amendment A1:2001 to EN 55024:1998 (CISPR 24:1997/A1:2001)	Note 3	Date expired (1.10.2004)
	Amendment A2:2003 to EN 55024:1998 (CISPR 24:1997/A2:2002)	Note 3	1.12.2005
CENELEC	EN 55103-1:1996 Electromagnetic compatibility — Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use — Part 1: Emission	Relevant generic standard(s) Note 2.3	Date expired (1.9.1999)
CENELEC	EN 55103-2:1996 Electromagnetic compatibility — Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use — Part 2: Immunity	Relevant generic standard(s) Note 2.3	Date expired (1.9.1999)
CENELEC	EN 60034-1:1998 Rotating electrical machines — Part 1: Rating and performance (IEC 60034-1:1996 (Modified))	—	—
CENELEC	Amendment A11:2002 to EN 60034-1:1998	Relevant generic standard(s) Note 2.3	1.7.2005
CENELEC	EN 60204-31:1998 Safety of machinery — Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems (IEC 60204-31:1996 (Modified))	Relevant generic standard(s) Note 2.3	Date expired (1.6.2002)
CENELEC	EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially type-tested assemblies (IEC 60439-1:1999)	EN 60439-1:1994 +A11:1996 Note 2.1	Date expired (1.8.2002)
CENELEC	EN 60521:1995 Class 0,5, 1 and 2 alternating-current watt-hour meters (IEC 60521:1988)	Relevant generic standard(s) Note 2.3	Date expired (15.7.1995)
CENELEC	EN 60669-2-1:1996 Switches for household and similar fixed-electrical installations — Part 2: Particular requirements — Section 1: Electronic switches (IEC 60669-2-1:1994 + A1:1994 + A2:1995 (Modified))	—	—
CENELEC	Amendment A11:1997 to EN 60669-2-1:1996	Relevant generic standard(s) Note 2.3	Date expired (1.6.1999)
CENELEC	EN 60669-2-1:2000 Switches for household and similar fixed electrical installations — Part 2-1: Particular requirements — Electronic switches (IEC 60669-2-1:1996 + A1:1997 (Modified))	EN 60669-2-1:1996 and its amendment Note 2.1	1.10.2005
CENELEC	Amendment A2:2001 to EN 60669-2-1:2000 (IEC 60669-2-1:1996/A2:1999 (Modified))	Note 3	1.10.2005
CENELEC	EN 60669-2-2:1997 Switches for household and similar fixed electrical installations — Part 2: Particular requirements — Section 2: Electromagnetic remote-control switches (RCS)	Relevant generic standard(s) Note 2.3	Date expired (1.6.1999)
CENELEC	EN 60669-2-3:1997 Switches for household and similar fixed electrical installations — Part 2-3: Particular requirements — Time-delay switches (TDS) (IEC 60669-2-3:1997)	EN 60669-2-3:1996 Note 2.1	Date expired (1.6.1999)
CENELEC	EN 60687:1992 Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S) (IEC 60687:1992)	Relevant generic standard(s) Note 2.3	Date expired (1.6.1993)
CENELEC	EN 60730-1:1995 Automatic electrical controls for household and similar use — Part 1: General requirements (IEC 60730-1:1993 (Modified))	—	—
	Amendment A11:1996 to EN 60730-1:1995	Relevant generic standard(s) Note 2.3	Date expired (1.1.1998)
	Amendment A17:2000 to EN 60730-1:1995	Note 3	Date expired (1.10.2002)
CENELEC	EN 60730-1:2000 Automatic electrical controls for household and similar use — Part 1: General requirements (IEC 60730-1:1999 (Modified)) Note 7	EN 60730-1:1995 and its amendments	—
CENELEC	EN 60730-2-5:1995 Automatic electrical controls for household and similar use — Part 2: Particular requirements for automatic electrical burner control systems (IEC 60730-2-5:1993 (Modified))	EN 60730-1:1995 and its amendments Note 2.3	Date expired (15.12.2000)
CENELEC	EN 60730-2-6:1995 Automatic electrical controls for household and similar use — Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements (IEC 60730-2-6:1991 (Modified))	—	—
CENELEC	Amendment A1:1997 to EN 60730-2-6:1995 (IEC 60730-2-6:1991/A1:1994 (Modified))	Note 3	Date expired (15.12.2003)
CENELEC	EN 60730-2-7:1991 Automatic electrical controls for household and similar use — Part 2: Particular requirements for timers and time switches (IEC 60730-2-7:1990 (Modified))	—	—
CENELEC	Amendment A1:1997 to EN 60730-2-7:1991 (IEC 60730-2-7:1990/A1:1994 (Modified))	Note 3	Date expired (1.1.2004)
CENELEC	EN 60730-2-8:1995 Automatic electrical controls for household and similar use — Part 2: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2-8:1992 (Modified))	—	—
	Amendment A1:1997 to EN 60730-2-8:1995 (IEC 60730-2-8:1992/A1:1994 (Modified))	Note 3	Date expired (1.1.2004)
	Amendment A2:1997 to EN 60730-2-8:1995 (IEC 60730-2-8:1992/A2:1997)	Note 3	Date expired (1.1.2004)
CENELEC	EN 60730-2-8:2002 Automatic electrical controls for household and similar use — Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2-8:2000 (Modified))	EN 60730-2-8:1995 and its amendments Note 2.1	1.12.2008
CENELEC	Amendment A1:2003 to EN 60730-2-8:2002 (IEC 60730-2-8:2000/A1:2002 (Modified))	Note 3	1.12.2008
CENELEC	EN 60730-2-9:1995 Automatic electrical controls for household and similar use — Part 2: Particular requirements for temperature sensing controls (IEC 60730-2-9:1992 (Modified))	—	—
	Amendment A1:1996 to EN 60730-2-9:1995 (IEC 60730-2-9:1992/A1:1994 (Modified))	Note 3	Date expired (1.1.2004)
	Amendment A2:1997 to EN 60730-2-9:1995 (IEC 60730-2-9:1992/A2:1994 (Modified))	Note 3	Date expired (1.1.2004)
CENELEC	EN 60730-2-9:2002 Automatic electrical controls for household and similar use — Part 2-9: Particular requirements for temperature sensing controls (IEC 60730-2-9:2000 (Modified))	EN 60730-2-9:1995 and its amendments Note 2.1	1.12.2008
CENELEC	Amendment A1:2003 to EN 60730-2-9:2002 (IEC 60730-2-9:2000/A1:2002 (Modified))	Note 3	1.12.2008
CENELEC	EN 60730-2-11:1993 Automatic electrical controls for household and similar use — Part 2-11: Particular requirements for energy regulators (IEC 60730-2-11:1993)	—	—
CENELEC	Amendment A1:1997 to EN 60730-2-11:1993 (IEC 60730-2-11:1993/A1:1994 (Modified))	Note 3	Date expired (1.7.2000)
CENELEC	EN 60730-2-13:1998 Automatic electrical controls for household and similar use — Part 2-13: Particular requirements for humidity sensing controls (IEC 60730-2-13:1995 (Modified))	EN 60730-1:1995 and its amendments Note 2.3	Date expired (1.8.2001)
CENELEC	EN 60730-2-14:1997 Automatic electrical controls for household and similar use — Part 2-14: Particular requirements for electric actuators (IEC 60730-2-14:1995 (Modified))	EN 60730-1:1995 and its amendments Note 2.3	Date expired (1.6.2004)
CENELEC	Amendment A1:2001 to EN 60730-2-14:1997 (IEC 60730-2-14:1995/A1:2001)	Note 3	1.7.2008
CENELEC	EN 60730-2-18:1999 Automatic electrical controls for household and similar use — Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements (IEC 60730-2-18:1997 (Modified))	EN 60730-1:1995 and its amendments Note 2.3	Date expired (1.4.2002)
CENELEC	EN 60870-2-1:1996 Telecontrol equipment and systems — Part 2: Operating conditions — Section 1: Power supply and electromagnetic compatibility	Relevant generic standard(s) Note 2.3	Date expired (1.9.1996)
CENELEC	EN 60945:1997 Maritime navigation and radiocommunication equipment and systems — General requirements — Methods of testing and required test results (IEC 60945:1996)	EN 60945:1995 Note 2.1	Date expired (1.9.1997)
CENELEC	EN 60945:2002 Maritime navigation and radiocommunication equipment and systems — General requirements — Methods of testing and required test results (IEC 60945:2002)	EN 60945:1997 Note 2.1	1.10.2005
CENELEC	EN 60947-1:1999 Low-voltage switchgear and controlgear — Part 1: General rules (IEC 60947-1:1999 (Modified)) Note 6	EN 60947-1:1997 Note 2.1	Date expired (1.11.2001)
CENELEC	Amendment A2:2001 to EN 60947-1:1999 (IEC 60947-1:1999/A2:2001)	Note 3	Date expired (1.12.2004)
CENELEC	EN 60947-1:2004 Low-voltage switchgear and controlgear — Part 1: General rules (IEC 60947-1:2004) Note 6	EN 60947-1:1999 and its amendment Note 2.1	1.4.2007
CENELEC	EN 60947-2:1996 Low-voltage switchgear and controlgear — Part 2: Circuit-breakers (IEC 60947-2:1995)	Relevant generic standard(s) Note 2.3	Date expired (1.10.1997)
	Amendment A1:1997 to EN 60947-2:1996 (IEC 60947-2:1995/A1:1997)	EN 60947-2:1996/A11:1997 Note 3	Date expired (1.8.1998)
	Amendment A2:2001 to EN 60947-2:1996 (IEC 60947-2:1995/A2:2001)	Note 3	Date expired (1.7.2004)
CENELEC	EN 60947-2:2003 Low-voltage switchgear and controlgear — Part 2: Circuit-breakers (IEC 60947-2:2003)	EN 60947-2:1996 and its amendments Note 2.1	1.6.2006
CENELEC	EN 60947-3:1999 Low-voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:1999)	EN 60947-3:1992 +A1:1995 Note 2.1	Date expired (1.1.2002)
CENELEC	Amendment A1:2001 to EN 60947-3:1999 (IEC 60947-3:1999/A1:2001)	Note 3	Date expired (1.3.2004)
CENELEC	EN 60947-4-1:1992 Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters — Electromechanical contactors and motor-starters (IEC 60947-4-1:1990)	Relevant generic standard(s) Note 2.3	Date expired (1.10.1997)
CENELEC	Amendment A2:1997 to EN 60947-4-1:1992 (IEC 60947-4-1:1990/A2:1996)	Note 3	Date expired (1.10.1997)
CENELEC	EN 60947-4-1:2001 Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters — Electromechanical contactors and motor-starters (IEC 60947-4-1:2000)	—	—
CENELEC	Amendment A1:2002 to EN 60947-4-1:2001 (IEC 60947-4-1:2000/A1:2002)	EN 60947-4-1:1992 and its amendments Note 2.1	1.10.2005
CENELEC	EN 60947-4-2:2000 Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters — AC semiconductor motor controllers and starters (IEC 60947-4-2:1999)	EN 60947-4-2:1996 +A2:1998 Note 2.1	Date expired (1.12.2002)
CENELEC	Amendment A1:2002 to EN 60947-4-2:2000 (IEC 60947-4-2:1999/A1:2001)	Note 3	1.3.2005
CENELEC	EN 60947-4-3:2000 Low-voltage switchgear and controlgear — Part 4-3: Contactors and motor-starters — AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999)	Relevant generic standard(s) Note 2.3	Date expired (1.12.2002)
CENELEC	EN 60947-5-1:1997 Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices (IEC 60947-5-1:1997)	—	—
CENELEC	Amendment A12:1999 to EN 60947-5-1:1997	EN 60947-5-1:1991 +A12:1997 Note 2.1	Date expired (1.10.2002)
CENELEC	EN 60947-5-1:2004 Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices (IEC 60947-5-1:2003)	EN 60947-5-1:1997 and its amendment Note 2.1	1.5.2007
CENELEC	EN 60947-5-2:1998 Low-voltage switchgear and controlgear — Part 5-2: Control circuit devices and switching elements — Proximity switches (IEC 60947-5-2:1997 (Modified))	EN 60947-5-2:1997 Note 2.1	Date expired (1.10.2001)
CENELEC	Amendment A2:2004 to EN 60947-5-2:1998 (IEC 60947-5-2:1997/A2:2003)	Note 3	1.2.2007
CENELEC	EN 60947-5-3:1999 Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions (PDF) (IEC 60947-5-3:1999)	Relevant generic standard(s) Note 2.3	Date expired (1.5.2002)
CENELEC	EN 60947-5-6:2000 Low-voltage switchgear and controlgear — Part 5-6: Control circuit devices and switching elements — DC interface for proximity sensors and switching amplifiers (NAMUR) (IEC 60947-5-6:1999)	EN 50227:1997 Note 2.1	Date expired (1.1.2003)
CENELEC	EN 60947-5-7:2003 Low-voltage switchgear and controlgear — Part 5-7: Control circuit devices and switching elements — Requirements for proximity devices with analogue output (IEC 60947-5-7:2003)	Relevant generic standard(s) Note 2.3	1.9.2006
CENELEC	EN 60947-6-1:1991 Low-voltage switchgear and controlgear — Part 6-1: Multiple function equipment — Automatic transfer switching equipment (IEC 60947-6-1:1989)	Relevant generic standard(s) Note 2.3	Date expired (1.10.1997)
CENELEC	Amendment A2:1997 to EN 60947-6-1:1991 (IEC 60947-6-1:1989/A2:1997)	EN 60947-6-1:1991/A11:1997 Note 3	Date expired (1.7.1998)
CENELEC	EN 60947-6-2:1993 Low-voltage switchgear and controlgear — Part 6-2: Multiple function equipment — Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:1992)	Relevant generic standard(s) Note 2.3	Date expired (1.10.1997)
CENELEC	Amendment A1:1997 to EN 60947-6-2:1993 (IEC 60947-6-2:1992/A1:1997)	EN 60947-6-2:1993/A11:1997 Note 3	Date expired (1.7.1998)
CENELEC	EN 60947-6-2:2003 Low-voltage switchgear and controlgear — Part 6-2: Multiple function equipment — Control and protective switching devices (or equipment) (CPS) (IEC 60947-6-2:2002)	EN 60947-6-2:1993 and its amendment Note 2.1	1.9.2005
CENELEC	EN 60947-8:2003 Low-voltage switchgear and controlgear — Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines (IEC 60947-8:2003)	Relevant generic standard(s) Note 2.3	1.7.2006
CENELEC	EN 60974-10:2003 Arc welding equipment — Part 10: Electromagnetic compatibility (EMC) requirements (IEC 60974-10:2002 (Modified))	EN 50199:1995 Note 2.1	1.3.2006
CENELEC	EN 61000-3-2:2000 Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) (IEC 61000-3-2:2000 (Modified))	EN 61000-3-2:1995 +A1:1998 +A2:1998 +A14:2000 Note 2.1	Date expired (1.1.2004)
CENELEC	EN 61000-3-3:1995 Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection (IEC 61000-3-3:1994)	EN 60555-3:1987 +A1:1991 Note 2.2	Date expired (1.1.2001)
CENELEC	Amendment A1:2001 to EN 61000-3-3:1995 (IEC 61000-3-3:1994/A1:2001)	Note 3	Date expired (1.5.2004)
CENELEC	EN 61000-3-11:2000 Electromagnetic compatibility (EMC) — Part 3-11: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems — Equipment with rated current <= 75 A and subject to conditional connection (IEC 61000-3-11:2000)	Relevant generic standard(s) Note 2.3	Date expired (1.11.2003)
CENELEC	EN 61000-6-1:2001 Electromagnetic compatibility (EMC) — Part 6-1: Generic standards — Immunity for residential, commercial and light-industrial environments (IEC 61000-6-1:1997 (Modified))	EN 50082-1:1997 Note 2.1	Date expired (1.7.2004)
CENELEC	EN 61000-6-2:2001 Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity for industrial environments (IEC 61000-6-2:1999 (Modified))	EN 61000-6-2:1999 Note 2.1	Date expired (1.7.2004)
CENELEC	EN 61000-6-3:2001 Electromagnetic compatibility (EMC) — Part 6-3: Generic standards — Emission standard for residential, commercial and light-industrial environments (CISPR/IEC 61000-6-3:1996 (Modified))	EN 50081-1:1992 Note 2.1	Date expired (1.7.2004)
CENELEC	Amendment A11:2004 to EN 61000-6-3:2001	Note 3	1.7.2007
CENELEC	EN 61000-6-4:2001 Electromagnetic compatibility (EMC) — Part 6-4: Generic standards — Emission standard for industrial environments (IEC 61000-6-4:1997 (Modified))	EN 50081-2:1993 Note 2.1	Date expired (1.7.2004)
CENELEC	EN 61008-1:1994 Electrical accessories — Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) — Part 1: General rules (IEC 61008-1:1990 + A1:1992 (Modified))	—	—
	Amendment A2:1995 to EN 61008-1:1994 (IEC 61008-1:1990/A2:1995)	Relevant generic standard(s) Note 2.3	Date expired (1.7.2000)
	Amendment A14:1998 to EN 61008-1:1994	Relevant generic standard(s) Note 2.3	Date expired (1.1.2001)
CENELEC	EN 61009-1:1994 Electrical accessories — Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) — Part 1: General rules (IEC 61009-1:1991 (Modified))	—	—
	Amendment A1:1995 to EN 61009-1:1994 (IEC 61009-1:1991/A1:1995)	Relevant generic standard(s) Note 2.3	Date expired (1.7.2000)
	Amendment A14:1998 to EN 61009-1:1994	Note 3	Date expired (1.1.2001)
CENELEC	EN 61036:1996 Alternating current static watt-hour meters for active energy (classes 1 and 2) (IEC 61036:1996)	EN 61036:1992 Note 2.1	Date expired (1.6.1997)
CENELEC	Amendment A1:2000 to EN 61036:1996 (IEC 61036:1996/A1:2000)	Note 3	Date expired (1.6.2003)
CENELEC	EN 61037:1992 Electricity metering — Tariff and load control — Particular requirements for electronic ripple control receivers (IEC 61037:1990 (Modified))	NONE	—
	Amendment A1:1996 to EN 61037:1992 (IEC 61037:1990/A1:1996)	Note 3	Date expired (1.12.1996)
	Amendment A2:1998 to EN 61037:1992 (IEC 61037:1990/A2:1998)	Note 3	Date expired (1.5.2001)
CENELEC	EN 61038:1992 Electricity metering — Tariff and load controls — Particular requirements for time switches (IEC 61038:1990 (Modified))	NONE	—
	Amendment A1:1996 to EN 61038:1992 (IEC 61038:1990/A1:1996)	Note 3	Date expired (1.12.1996)
	Amendment A2:1998 to EN 61038:1992 (IEC 61038:1990/A2:1998)	Note 3	Date expired (1.5.2001)
CENELEC	EN 61131-2:1994 Programmable controllers — Part 2: Equipment requirements and tests (IEC 61131-2:1992)	Relevant generic standard(s) Note 2.3	Date expired (15.3.1995)
	Amendment A11:1996 to EN 61131-2:1994	Note 3	Date expired (1.12.1996)
	Amendment A12:2000 to EN 61131-2:1994	Note 3	Date expired (1.1.2003)
CENELEC	EN 61131-2:2003 Programmable controllers — Part 2: Equipment requirements and tests (IEC 61131-2:2003)	EN 61131-2:1994 and its amendments Note 2.1	1.5.2006
CENELEC	EN 61204-3:2000 Low voltage power supplies, d.c. output — Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2000)	Relevant generic standard(s) Note 2.3	Date expired (1.11.2003)
CENELEC	EN 61268:1996 Alternating current static var-hour meters for reactive energy (classes 2 and 3) (IEC 61268:1995)	Relevant generic standard(s) Note 2.3	Date expired (1.7.1996)
CENELEC	EN 61326:1997 Electrical equipment for measurement, control and laboratory use — EMC requirements (IEC 61326:1997)	Relevant generic standard(s) Note 2.3	Date expired (1.7.2001)
	Amendment A1:1998 to EN 61326:1997 (IEC 61326:1997/A1:1998)	Note 3	Date expired (1.7.2001)
	Amendment A2:2001 to EN 61326:1997 (IEC 61326:1997/A2:2000)	Note 3	Date expired (1.4.2004)
	Amendment A3:2003 to EN 61326:1997	Note 3	1.10.2006
CENELEC	EN 61543:1995 Residual current-operated protective devices (RCDs) for household and similar use — Electromagnetic compatibility (IEC 61543:1995)	Relevant generic standard(s) Note 2.3	Date expired (4.7.1998)
CENELEC	Amendment A11:2003 to EN 61543:1995	Note 3	1.3.2007
CENELEC	EN 61547:1995 Equipment for general lighting purposes — EMC immunity requirements (IEC 61547:1995)	Relevant generic standard(s) Note 2.3	Date expired (1.7.1996)
CENELEC	Amendment A1:2000 to EN 61547:1995 (IEC 61547:1995/A1:2000)	Note 3	Date expired (1.11.2003)
CENELEC	EN 61800-3:1996 Adjustable speed electrical power drive systems — Part 3: EMC product standard including specific test methods (IEC 61800-3:1996)	Relevant generic standard(s) Note 2.3	Date expired (1.4.1997)
CENELEC	Amendment A11:2000 to EN 61800-3:1996	Note 3	Date expired (1.1.2002)
CENELEC	EN 61812-1:1996 Specified time relays for industrial use — Part 1: Requirements and tests (IEC 61812-1:1996)	—	—
CENELEC	Amendment A11:1999 to EN 61812-1:1996	Relevant generic standard(s) Note 2.3	Date expired (1.1.2002)
CENELEC	EN 62052-11:2003 Electricity metering equipment (AC) — General requirements, tests and test conditions — Part 11: Metering equipment (IEC 62052-11:2003) Note 9	Relevant generic standard(s) Note 2.3	1.3.2006
CENELEC	EN 62053-11:2003 Electricity metering equipment (a.c.) — Particular requirements — Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) (IEC 62053-11:2003)	EN 60521:1995 Note 2.1	1.3.2006
CENELEC	EN 62053-21:2003 Electricity metering equipment (a.c.) — Particular requirements — Part 21: Static meters for active energy (classes 1 and 2) (IEC 62053-21:2003)	EN 61036:1996 and its amendment Note 2.1	1.3.2006
CENELEC	EN 62053-22:2003 Electricity metering equipment (a.c.) — Particular requirements — Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) (IEC 62053-22:2003)	EN 60687:1992 Note 2.1	1.3.2006
CENELEC	EN 62053-23:2003 Electricity metering equipment (a.c.) — Particular requirements — Part 23: Static meters for reactive energy (classes 2 and 3) (IEC 62053-23:2003)	EN 61268:1996 Note 2.1	1.3.2006
CEN	EN 12015:1998 Electromagnetic compatibility — Product family standard for lifts, escalators and passenger conveyors — Emission
CEN	EN 12016:1998 Electromagnetic compatibility — Product family standard for lifts, escalators and passenger conveyors — Immunity
CEN	EN 12895:2000 Industrial trucks — Electromagnetic compatibility
CEN	EN 13309:2000 Construction machinery — Electromagnetic compatibility of machines with internal electrical power supply
CEN	EN 14010:2003 Safety of machinery — Equipment for power driven parking of motor vehicles — Safety and EMC requirements for design, manufacturing, erection and commissioning stages
CEN	EN 617:2001 Continuous handling equipment and systems — Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
CEN	EN 618:2002 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
CEN	EN 619:2002 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads
CEN	EN 620:2002 Continuous handling equipment and systems — Safety and EMC requirements for fixed belt conveyors for bulk materials
CEN	EN ISO 14982:1998 Agricultural and forestry machines — Electromagnetic compatibility — Test methods and acceptance criteria (ISO 14982:1998)
ETSI	EN 300 386 V1.2.1 Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements	EN 300 386-2 V1.1.3	31.8.2005
ETSI	EN 300 386 V1.3.1 Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements	EN 300 386 V.1.2.1	31.8.2005
ETSI	EN 300 386 V1.3.2 Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements	EN 300 386 V.1.2.1	31.8.2005
ETSI	EN 300 386-2 V1.1.3 Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard		31.8.2005

General remark:

when there is a stroke in the column 4 (reference of the superseded standard), it means that the referenced standard may not be used without amendment or particular part for EMC purpose.

Note 1:

Generally the date of cessation of presumption of conformity will be the date of withdrawal ( ‘dow’), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 2.1:

The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.

Note 2.2:

The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.

Note 2.3:

The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

Note 3:

In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 4) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.

Example:

For EN 61037:1992, the following applies:

CENELEC

EN 61037:1992

Electricity metering — Tariff and load control — Particular requirements for electronic ripple control receivers

(IEC 61037:1990 (Modified))

[The referenced standard is EN 61037:1992]

NONE

[There is no superseded standard]

—

Amendment A1:1996 to EN 61037:1992

(IEC 61037:1990/A1:1996)

[The referenced standard is EN 61037:1997

+A1:1996 to EN 61037:1992

Note 3

[The superseded standard is EN 61037:1992]

Date expired

(1.12.1996)

Amendment A2:1998 to EN 61037:1992

(IEC 61037:1990/A2:1998)

[The referenced standard is EN 61037:1992

+A1:1996 to EN 61037:1992

+A2:1998 to EN 61037:1992]

Note 3

[The superseded standard is EN 61037:1992

+A1:1996 to EN 61037:1992]

Date expired

(1.5.2001)

Note 6:

EN 60947-1:1999 does not give presumption of conformity without another part of the standard. EN 60947-1:2004 does not give presumption of conformity without another part of the standard.

Note 7:

EN 60730-1:2000 does not give presumption of conformity without another part of the standard.

Note 8:

EN 55012 is applicable for giving presumption of conformity under directive 89/336/EEC for those vehicles, boats and internal combustion engine-driven devices that are not within the scope of directives 95/54/EC, 97/24/EC, 2000/2/EC or 2004/104/EC.

Note 9:

EN 62052-11:2003 does not give presumption of conformity without a part of the EN 62053 series.

This list replaces all the previous lists published in the Official Journal of the European Union.

		ISSN 1725-2423
Official Journal of the European Union		C 77

English edition	Information and Notices	Volume 48 31 March 2005

Notice No	Contents	page
	I Information
	Commission
2005/C 077/1	Euro exchange rates	1

2005/C 077/2	Notice of initiation of an anti-dumping proceeding concerning imports of certain seamless pipes and tubes, of iron or steel originating in Croatia, Romania, Russia and Ukraine, of the initiation of an interim review of the anti-dumping duties on imports of certain seamless pipes and tubes of iron or non-alloy steel originating, inter alia, in Russia and Romania and of the initiation of an interim review of the anti-dumping duty on imports of certain seamless pipes and tubes of iron or non-alloy steel originating in Croatia and Ukraine	2

2005/C 077/3	Commission communication in the framework of the implementation of the Council directive 89/336/EEC ( 1 )	8

2005/C 077/4	Authorisation for State aid pursuant to Articles 87 and 88 of the EC Treaty — Cases where the Commission raises no objections ( 1 )	29

2005/C 077/5	Prior notification of a concentration (Case COMP/M.3759 — Sabanci/DUSA) — Candidate case for simplified procedure ( 1 )	31

2005/C 077/6	Prior notification of a concentration (Case COMP/M.3665 — ENEL/Slovenske Elektrarne) ( 1 )	32

2005/C 077/7	Non-opposition to a notified concentration (Case COMP/3723 — EQT/ISS/Healthcare/Carepartner/JV) ( 1 )	33

	III Notices
	Commission
2005/C 077/8	MEDIA PLUS (2001-2005) — Implementation of the programme to encourage the development, distribution and promotion of European audiovisual works — Call for proposals INFSO/MEDIA/04/05 — Support for the implementation of Pilot Projects	34

2005/C 077/9	EDICOM Grants Programme — Projects that may benefit from a Eurostat grant during the year 2005 under the EDICOM programme — Public information	36

	Currency	Exchange rate
USD	US dollar	1,2943
JPY	Japanese yen	139,13
DKK	Danish krone	7,4493
GBP	Pound sterling	0,68770
SEK	Swedish krona	9,1325
CHF	Swiss franc	1,5513
ISK	Iceland króna	79,33
NOK	Norwegian krone	8,186
BGN	Bulgarian lev	1,9559
CYP	Cyprus pound	0,5845
CZK	Czech koruna	30,085
EEK	Estonian kroon	15,6466
HUF	Hungarian forint	247,15
LTL	Lithuanian litas	3,4528
LVL	Latvian lats	0,6959
MTL	Maltese lira	0,4305
PLN	Polish zloty	4,1118
ROL	Romanian leu	36 677
SIT	Slovenian tolar	239,70
SKK	Slovak koruna	38,870
TRY	Turkish lira	1,7846
AUD	Australian dollar	1,6790
CAD	Canadian dollar	1,5685
HKD	Hong Kong dollar	10,0949
NZD	New Zealand dollar	1,8266
SGD	Singapore dollar	2,1374
KRW	South Korean won	1 324,72
ZAR	South African rand	8,1941