Reduction of pollution caused by waste from the titanium dioxide industry

EU legislation on pollution caused by waste from the titanium dioxide industry is now governed by Directive 2010/75(EU) on industrial emissions (integrated pollution prevention and control).

ACT

Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control).

SUMMARY

Titanium dioxide waste can give rise to serious air and water pollution. For this reason, Directive 2010/75/EU devotes a specific chapter to titanium dioxide waste and sets stringent limit values for emissions.

Prohibition of disposal of waste

The following forms of waste must not be disposed of into any water body, sea or ocean:

Control of emissions into water

Limit values are set for emissions into water (Annex VIII, Part 1).

Prevention and control of emissions into air

Emission of acid droplets from installations must be prevented.

Limit values are set for emissions into air (Annex VIII, Part 2).

Monitoring of emissions

EU member countries must ensure that emissions into water and air are monitored and that the conditions laid down in the installation’s permit to operate are fully met (e.g. preventive measures are taken against pollution; best available techniques (BATs) are applied; waste is reduced, recycled or disposed of in the least polluting manner; energy efficiency is maximised).

Monitoring must be carried out in accordance with CEN (or other recognised standards that ensure the provision of data of an equivalent scientific quality). Specifications regarding the monitoring process are included in Annex VIII, Part 3.

REFERENCES

Act

Entry into force

Deadline for transposition in the Member States

Official Journal

Directive 2010/75/EU

6.1.2011

7.1.2013

OJ L 334 of 17.12.2010

Last updated: 11.08.2014