C2000/071/03

Commission communication in the framework of the implementation of Directive 94/9/EC of the European Parliament and Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres (Text with EEA relevance)

Official Journal C 071 , 11/03/2000 P. 0003 - 0005


Commission communication in the framework of the implementation of Directive 94/9/EC of the European Parliament and Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres

(2000/C 71/03)

(Text with EEA relevance)

(Publication of titles and references of harmonised standards under the Directive)

Note 1:

Generally the date of cessation of presumption of conformity will be the date of withdrawal ("dow"), set by the European standards body, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 3:

In case of amendments, the referenced standard is EN CCCCC:YY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 4) therefore consists of EN CCCCC:YY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.

Example: For EN 50014:1997, the following applies:

Cenelec | EN 50014:1997 Electrical apparatus for potentially explosive atmospheres General requirements (The referenced standard is EN 50014:1997) | | None (There is no superseded standard) | — |

Amendment A1:1999 to EN 50014:1997 (The referenced standard is EN 50014:1997 + A1:1999 to EN 50014:1997) | | Note 3 (The superseded standard is EN 50014:1997) | — |

Amendment A2:1999 to EN 50014:1997 (The referenced standard is EN 50014:1997 + A1:1999 to EN 50014:1997 + A2:1999 to EN 50014:1997) | | Note 3 (The superseded standard is EN 50014:1997 + A1:1999 to EN 50014:1997) | — |

European Standards Organisation [1] | Reference and title of the standard | Reference document | Reference of the superseded standard | Date of cessation of presumption of conformity of the superseded standard Note 1 |

CEN | EN 1127-1:1997 Explosive atmospheres — Explosion prevention and protection — Part 1: Basic concepts and methodology | | None | — |

Cenelec | EN 50014:1997 Electrical apparatus for potentially explosive atmospheres — General requirements | | None | — |

Amendment A2:1999 to EN 50014:1997 | | Note 3 | — |

Amendment A1:1999 to EN 50014:1997 | | Note 3 | — |

Cenelec | EN 50015:1998 Electrical apparatus for potentially explosive atmospheres — Oil immersion "o" | | None | — |

Cenelec | EN 50017:1998 Electrical apparatus for potentially explosive atmospheres — Powder filling "q" | | None | — |

Cenelec | EN 50021:1999 Electrical apparatus for potentially explosive atmospheres — Type of protection "n" | | None | — |

Cenelec | EN 50054:1998 Electrical apparatus for the detection and measurement of combustible gases — General requirements and test methods | | None | — |

Cenelec | EN 50055:1998 Electrical apparatus for the detection and measurement of combustible gases — Performance requirements for Group I apparatus indicating up to 5 % (v/v) methane in air | | None | — |

Cenelec | EN 50056:1998 Electrical aparatus for the detection and measurement of combustible gases — Performance requirements for Group I apparatus indicating up to 100 % (v/v) methane in air | | None | — |

Cenelec | EN 50057:1998 Electrical apparatus for the detection and measurement of combustible gases — Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit | | None | — |

Cenelec | EN 50058:1998 Electrical apparatus for the detection and measurement of combustible gases — Performance requirements for Group II apparatus indicating up to 100 % (v/v) gas | | None | — |

Cenelec | EN 50104:1998 Electrical apparatus for the detection and measurement of oxygen — Performance requirements and test methods | | None | — |

Cenelec | EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours — Part 1: General requirements and test methods | | None | — |

Cenelec | EN 50241-2:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours — Part 2: Performance requirements for apparatus for the detection of combustible gases | | None | — |

Cenelec | EN 50281-1-1:1998 Electrical apparatus for use in the presence of combustible dust — Part 1-1: Electrical apparatus protected by enclosures — Construction and testing | | None | — |

Cenelec | EN 50281-1-2:1998 Electrical apparatus for use in the presence of combustible dust — Part 1-2: Electrical apparatus protected by enclosures — Selection, installation and maintenance And corrigendum December 1999 to EN 50281-1-2:1998 | | None | — |

Cenelec | EN 50281-2-1:1998 Electrical apparatus for use in the presence of combustible dust — Part 2-1: Test methods — Methods for determining the minimum ignition temperatures of dust | | None | — |

Cenelec | EN 50284:1999 Special requirements for construction, test and marking of electrical apparatus of equipment group II, Category 1 G | | None | — |

NOTE:

- any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies of which the list is annexed to European Parliament and Council Directive 98/34/EC [2], as amended by Council Directive 98/48/EC [3];

- publication of the references in the Official Journal of the European Communities does not imply that the standards are available in all the Community languages;

- the Commission ensures the updating of this list;

- this list replaces all the previous lists published in the Official Journal of the European Communities.

[1] ETSI: BP 152, F-06561.

[2] OJ L 204, 21.7.1998, p. 37.

[3] OJ L 217, 5.8.1998, p. 18.

--------------------------------------------------