21.7.2022   

EN

Official Journal of the European Union

L 193/1


COUNCIL REGULATION (EU) 2022/1269

of 21 July 2022

amending Regulation (EU) No 833/2014 concerning restrictive measures in view of Russia’s actions destabilising the situation in Ukraine

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 215 thereof,

Having regard to Council Decision (CFSP) 2022/1271 of 21 July 2022 amending Decision 2014/512/CFSP concerning restrictive measures in view of Russia’s actions destabilising the situation in Ukraine (1),

Having regard to the joint proposal of the High Representative of the Union for Foreign Affairs and Security Policy and of the European Commission,

Whereas:

(1)

On 31 July 2014, the Council adopted Regulation (EU) No 833/2014 (2).

(2)

Regulation (EU) No 833/2014 gives effect to certain measures provided for in Decision 2014/512/CFSP.

(3)

On 21 July 2022, the Council adopted Decision (CFSP) 2022/1271, amending Decision 2014/512/CFSP.

(4)

Decision (CFSP) 2022/1271 extends the list of controlled items which might contribute to Russia’s military and technological enhancement or the development of its defence and security sector. It also imposes a prohibition on the direct or indirect import, purchase or transfer of gold, which constitutes Russia’s most significant export after energy. This prohibition applies to Russian-origin gold, exported from Russia after the entry into force of the Regulation.

(5)

Decision (CFSP) 2022/1271 extends the port access ban to locks in order to ensure full implementation of the measure and avoid circumvention.

(6)

In order to safeguard the technical industrial standard setting process of the International Civil Aviation Organization (ICAO), Decision (CFSP) 2022/1271 allows, the sharing of technical assistance with Russia in relation to aviation goods and technology in this specific framework.

(7)

In order to ensure access to justice, Decision (CFSP) 2022/1271 also allows an exemption from the prohibition to enter into any transactions with Russian public entities necessary to ensure access to judicial, administrative or arbitral proceedings.

(8)

In order to ensure the correct implementation of the measures set out in Regulation (EU) No 833/2014, it is necessary to clarify the scope of the prohibition on public procurement. Further, it is necessary to harmonise the notification requirements for national competent authorities granting authorisations pursuant to derogations provided for in that Regulation.

(9)

Decision CFSP 2022/1271 expands the scope of the prohibition on accepting deposits to include those from legal persons, entities or bodies established in third countries and majority-owned by Russian nationals or natural persons residing in Russia. Additionally, it subjects the acceptance of deposits for non-prohibited cross-border trade to a prior authorisation by the national competent authorities.

(10)

Finally, Decision CFSP 2022/1271 makes certain technical corrections in the operative text and certain annexes.

(11)

In view of the Union’s determined stance to combat food and energy insecurity around the world, and in order to avoid any potential negative consequences therefor, Decision (CFSP) 2022/1271 extends the exemption from the prohibition to engage in transactions with certain State-owned entities as regards transactions for agricultural products and the supply of oil and petroleum products to third countries.

(12)

In more general terms, the Union is committed to avoiding all measures which might lead to food insecurity around the globe. Consequently, none of the measures in this Regulation or any of those adopted earlier in view of Russia’s actions destabilising the situation in Ukraine target in any way the trade in agricultural and food products, including wheat and fertilisers, between third countries and Russia.

(13)

Similarly, the Union measures do not prevent third countries and their nationals operating outside of the Union from purchasing pharmaceutical or medical products from Russia.

(14)

These measures fall within the scope of the Treaty and, therefore, in particular with a view to ensuring their uniform application in all Member States, regulatory action at the level of the Union is necessary.

(15)

Regulation (EU) No 833/2014 should therefore be amended accordingly,

HAS ADOPTED THIS REGULATION:

Article 1

Regulation (EU) No 833/2014 is amended as follows:

(1)

Article 2 is amended as follows:

(a)

in paragraph 3, point (f) is deleted;

(b)

in paragraph 3, the second subparagraph is replaced by the following:

‘With the exception of point (g) of the first subparagraph, the exporter shall declare in the customs declaration that the items are being exported under the relevant exception set out in this paragraph and shall notify the competent authority of the Member State where the exporter is resident or established of the first use of the relevant exception within 30 days from the date when the first export took place.’;

(c)

in paragraph 4, the following point is added:

‘(h)

intended for ensuring cyber-security and information security for natural and legal persons, entities and bodies in Russia except for its government and undertakings directly or indirectly controlled by that government.’;

(2)

Article 2a is amended as follows:

(a)

in paragraph 3, point (f) is deleted;

(b)

in paragraph 3, the second subparagraph is replaced by the following:

‘With the exception of point (g) of the first subparagraph, the exporter shall declare in the customs declaration that the items are being exported under the relevant exception set out in this paragraph and shall notify the competent authority of the Member State where the exporter is resident or established of the first use of the relevant exception within 30 days from the date when the first export took place.’;

(c)

in paragraph 4, the following point is added:

‘(h)

intended for ensuring cyber-security and information security for natural and legal persons, entities and bodies in Russia except for its government and undertakings directly or indirectly controlled by that government.’;

(3)

in Article 3b, the following paragraph is added:

‘5.   The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 4 within two weeks of the authorisation.’;

(4)

in Article 3c, the following paragraph is added:

‘9.   The prohibition in paragraph 4 point (a) shall not apply to the exchange of information aimed at establishing technical standards in the framework of the International Civil Aviation Organization in relation to goods and technology referred to in paragraph 1.’;

(5)

Article 3ea is amended as follows:

(a)

paragraph 1 is replaced by the following:

‘1.   It shall be prohibited to provide access, after 16 April 2022, to ports and, after 29 July 2022, to locks in the territory of the Union, to any vessel registered under the flag of Russia, with the exception of access to locks for the purpose of leaving the territory of the Union.’;

(b)

in paragraph 5, the introductory wording is replaced by the following:

‘By way of derogation from paragraph 1, the competent authorities may authorise a vessel to access a port or lock, under such conditions as they deem appropriate, after having determined that the access is necessary for:’;

(c)

the following paragraph is added:

‘5a.   By way of derogation from paragraph 2, the competent authorities may authorise vessels that have changed their Russian flag or their registration, to the flag or register of any other State prior to 16 April 2022, to access a port or a lock, under such conditions as they deem appropriate, after having determined that:

(a)

a Russian flag or registration was required by contract; and

(b)

the access is necessary for the unloading of goods strictly necessary for the completion of renewable energy projects in the Union, provided that the import of such goods is not otherwise prohibited under this Regulation.’;

(d)

paragraph 6 is replaced by the following:

‘6.   The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraphs 5 and 5a within two weeks of the authorisation.’;

(6)

in Article 3f, the following paragraph is added:

‘5.   The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 4 within two weeks of the authorisation.’;

(7)

in Article 3h, the following paragraph is added:

‘3a.   The prohibition in paragraph 1 shall not apply to goods falling under CN 7113 00 00 and CN 7114 00 00 as listed in Annex XVIII for personal use of natural persons travelling from the European Union or members of their immediate families travelling with them, owned by those individuals and not intended for sale.’;

(8)

Article 3k is amended as follows:

(a)

paragraph 5 is replaced by the following:

‘5.   The competent authorities of the Member States may authorise, under the conditions they deem appropriate, the sale, supply, transfer or export of the goods and technology listed in Annex XXIII, or the provision of related technical or financial assistance, after having determined that such goods or technology or the provision of related technical or financial assistance are necessary for:

(a)

medical or pharmaceutical purposes, or for humanitarian purposes, such as delivering or facilitating the delivery of assistance, including medical supplies, food, or the transfer of humanitarian workers and related assistance or for evacuations; or

(b)

the exclusive use and under the full control of the authorising Member State and in order to fulfil its maintenance obligations in areas which are under a long-term lease agreement between that Member State and the Russian Federation.’;

(b)

the following paragraphs are added:

‘6.   When deciding on requests for authorisations for medical or pharmaceutical purposes in accordance with paragraph 5, the competent authorities shall not grant an authorisation for exports to any natural or legal person, entity or body in Russia or for use in Russia, if they have reasonable grounds to believe that the goods might have a military end-use.

7.   The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 5 within two weeks of the authorisation.’;

(9)

the following Article is inserted:

‘Article 3o

1.   It shall be prohibited to purchase, import, or transfer, directly or indirectly, gold, as listed in Annex XXVI if it originates in Russia and it has been exported from Russia into the Union or to any third country after 22 July 2022.

2.   It shall be prohibited to purchase, import, or transfer, directly or indirectly the products listed in Annex XXVI when processed in a third country incorporating the products prohibited in paragraph 1.

3.   It shall be prohibited to purchase, import, or transfer, directly or indirectly, gold, as listed in Annex XXVII if it originates in Russia and it has been exported from Russia into the Union after 22 July 2022.

4.   It shall be prohibited to:

(a)

provide technical assistance, brokering services or other services related to the goods referred to in paragraphs 1, 2 and 3 and to the provision, manufacture, maintenance and use of those goods, directly or indirectly in relation to the prohibition in paragraphs 1, 2 and 3;

(b)

provide financing or financial assistance related to the goods referred to in paragraphs 1, 2 and 3 for any purchase, import or transfer of those goods, or for the provision of related technical assistance, brokering services or other services, directly or indirectly in relation to the prohibition in paragraphs 1, 2 and 3.

5.   The prohibitions in paragraphs 1, 2 and 3 shall not apply to gold which is necessary for the official purposes of diplomatic missions, consular posts or international organisations in Russia enjoying immunities in accordance with international law.

6.   The prohibition in paragraph 3 shall not apply to goods as listed in Annex XXVII for personal use of natural persons travelling to the European Union or members of their immediate families travelling with them, owned by those individuals and not intended for sale.

7.   By way of derogation from paragraphs 1, 2 and 3, the competent authorities may authorise the transfer or import of cultural goods which are on loan in the context of formal cultural cooperation with Russia.’;

(10)

Article 5aa is amended as follows:

(a)

paragraph 3 is amended as follows:

(i)

point (a) is replaced by the following:

‘(a)

transactions which are strictly necessary for the direct or indirect purchase, import or transport of natural gas, titanium, aluminium, copper, nickel, palladium and iron ore from or through Russia into the Union, a country member of the European Economic Area, Switzerland, or the Western Balkans;’;

(ii)

point (d) is replaced by the following:

‘(d)

transactions, including sales, which are strictly necessary for the wind-down, by 31 December 2022, of a joint venture or similar legal arrangement concluded before 16 March 2022, involving a legal person, entity or body referred to in paragraph 1;’;

(iii)

the following points are added:

‘(aa)

unless prohibited under Article 3m or 3n, transactions which are strictly necessary for the direct or indirect purchase, import or transport of oil, including refined petroleum products, from or through Russia;

(f)

transactions which are necessary for the purchase, import or transport of pharmaceutical, medical, agricultural and food products, including wheat and fertilisers whose import, purchase and transport is allowed under this Regulation;

(g)

transactions which are strictly necessary to ensure access to judicial, administrative or arbitral proceedings in a Member State, as well as for the recognition or enforcement of a judgment or an arbitration award rendered in a Member State and if such transactions are consistent with the objectives of this Regulation and Regulation (EU) No 269/2014.’;

(11)

Article 5b is amended as follows:

(a)

paragraph 1 is replaced by the following:

‘1.   It shall be prohibited to accept any deposits from Russian nationals or natural persons residing in Russia, legal persons, entities or bodies established in Russia or a legal person, entity or body established outside the Union and whose proprietary rights are directly or indirectly owned for more than 50 % by Russian nationals or natural persons residing in Russia, if the total value of deposits of that natural or legal person, entity or body per credit institution exceeds EUR 100 000.’;

(b)

paragraph 4 is deleted;

(12)

in Article 5c, paragraph 1, the following point is added:

‘(f)

necessary for non-prohibited cross-border trade in goods and services between the Union and Russia.’;

(13)

in Article 5e, paragraph 2 is replaced by the following:

‘2.   Paragraph 1 shall not apply to nationals of a Member State, of a country member of the European Economic Area or of Switzerland, or to natural persons having a temporary or permanent residence permit in a Member State, in a country member of the European Economic Area or in Switzerland.’;

(14)

in Article 5j, paragraph 1 is replaced by the following:

‘1.   It shall be prohibited to provide credit rating services to or on any Russian national or natural person residing in Russia or any legal person, entity or body established in Russia.’;

(15)

in Article 5k, paragraph 1 is replaced by the following:

‘1.   It shall be prohibited to award or continue the execution of any public or concession contract falling within the scope of the public procurement Directives, as well as Article 10(1), (3), (6) points (a) to (e), (8), (9) and (10), Articles 11, 12, 13 and 14 of Directive 2014/23/EU, Article 7, points (a) to (d), and Article 8, Article 10 points (b) to (f) and (h) to (j) of Directive 2014/24/EU, Article 18, Article 21 points (b) to (e) and (g) to (i), Articles 29 and 30 of Directive 2014/25/EU and Article 13 points (a) to (d), (f) to (h) and (j) of Directive 2009/81/EC, and Title VII of Regulation (EU, Euratom) 2018/1046, to or with:

(a)

a Russian national, a natural person residing in Russia, or a legal person, entity or body established in Russia;

(b)

a legal person, entity or body whose proprietary rights are directly or indirectly owned for more than 50 % by an entity referred to in point (a) of this paragraph; or

(c)

a natural or legal person, entity or body acting on behalf or at the direction of an entity referred to in point (a) or (b) of this paragraph,

including, where they account for more than 10 % of the contract value, subcontractors, suppliers or entities whose capacities are being relied on within the meaning of the public procurement Directives.’;

(16)

in Article 5m, paragraph 4 is replaced by the following:

‘4.   Paragraphs 1 and 2 shall not apply when the trustor or beneficiary is a national of a Member State or a natural person having a temporary or permanent residence permit in a Member State, in a country member of the European Economic Area, or in Switzerland.’;

(17)

Article 5n is amended as follows:

(a)

paragraph 4 is replaced by the following:

‘4.   Paragraph 1 shall not apply to the provision of services intended for the exclusive use of legal persons, entities or bodies established in Russia that are owned by, or solely or jointly controlled by, a legal person, entity or body which is incorporated or constituted under the law of a Member State, a country member of the European Economic Area, or of Switzerland.’;

(b)

the following paragraph is added:

‘6.   The Member State concerned shall inform the other Member States and the Commission of any authorisation granted under paragraph 5 within two weeks of the authorisation.’;

(18)

in Article 12a, the following paragraphs are added:

‘3.   The competent authorities of the Member States, including enforcement authorities and administrators of official registers where natural persons, legal persons, entities and bodies as well as immovable or movable property are registered, shall process and exchange information including personal data, with other competent authorities of the Member States and the European Commission.

4.   Any processing of personal data shall be carried out in accordance with this Regulation and Regulations (EU) 2016/679 (*1) and (EU) 2018/1725 (*2) of the European Parliament and of the Council and only in so far as necessary for the application of this Regulation and to ensure effective cooperation between Member States as well as with the European Commission in the application of this Regulation.

(*1)  Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation) (OJ L 119, 4.5.2016, p. 1)."

(*2)  Regulation (EU) 2018/1725 of the European Parliament and of the Council of 23 October 2018 on the protection of natural persons with regard to the processing of personal data by the Union institutions, bodies, offices and agencies and on the free movement of such data, and repealing Regulation (EC) No 45/2001 and Decision No 1247/2002/EC (OJ L 295, 21.11.2018, p. 39).’;"

(19)

Annex IV is amended in accordance with Annex I of this Regulation;

(20)

Annex VII is amended in accordance with Annex II of this Regulation;

(21)

Annex IX is amended in accordance with Annex III of this Regulation;

(22)

Annex X is amended in accordance with Annex IV of this Regulation;

(23)

Annex XXII is amended in accordance with Annex V of this Regulation;

(24)

Annex XXIII is amended in accordance with Annex VI of this Regulation;

(25)

Annex XXIV is amended in accordance with Annex VII of this Regulation;

(26)

Annex XXVI is added in accordance with Annex VIII of this Regulation;

(27)

Annex XXVII is added in accordance with Annex IX of this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 21 July 2022.

For the Council

The President

M. BEK


(1)   OJ L 193, 21.7.2022.

(2)  Council Regulation (EU) No 833/2014 of 31 July 2014 concerning restrictive measures in view of Russia's actions destabilising the situation in Ukraine (OJ L 229, 31.7.2014, p. 1).


ANNEX I

In Annex IV to Regulation (EU) No 833/2014, the following natural or legal persons, entities or bodies are added:

‘Federal Center for Dual-Use Technology (FTsDT) Soyuz

Turayev Machine Building Design Bureau Soyuz

Zhukovskiy Central Aerohydrodynamics Institute (TsAGI)

Rosatomflot’.


ANNEX II

Annex VII to Regulation (EU) No 833/2014 is amended as follows:

(1)

in Category II – Computers, the following text:

“X.E.II.001

‘Technology’ for the ‘development’ or ‘production’ of equipment designed for 'multi-data-stream processing.

Technical Note: For the purpose of X.E.II.001, ‘multi-data-stream processing’ is a microprogram or equipment architecture technique that permits simultaneous processing of two or more data sequences under the control of one or more instruction sequences by means such as:”

is replaced by:

“X.E.II.002

‘Technology’ for the ‘development’ or ‘production’ of equipment designed for 'multi-data-stream processing'.

Technical Note: For the purpose of X.E.II.002, ‘multi-data-stream processing’ is a microprogram or equipment architecture technique that permits simultaneous processing of two or more data sequences under the control of one or more instruction sequences by means such as:”;

(2)

the following items are added:

‘Category VIII – Miscellaneous items

X.A.VIII.014

Water cannon systems for riot or crowd control, and components specially designed therefor.

Note:

X.A.VIII.014 water cannon systems include, for example: vehicles or fixed stations equipped with remotely operated water cannon that are designed to protect the operator from an outside riot with features such as armor, shatter resistant windows, metal screens, bull-bars, or run-flat tires. Components specially designed for water cannons may include, for example: deck gun water nozzles, pumps, reservoirs, cameras, and lights that are hardened or shielded against projectiles, elevating masts for those items, and teleoperation systems for those items.

X.A.VIII.015

Law enforcement striking weapons, including saps, police batons, side handle batons, tonfas, sjamboks, and whips.

X.A.VIII.016

Police helmets and shields; and specially designed components, other than those specified in the CML or in Regulation (EU) 2021/821.

X.A.VIII.017

Law enforcement restraint devices, including leg irons, shackles, and handcuffs; straight jackets; stun cuffs; shock belts; shock sleeves; multipoint restraint devices such as restraint chairs; and specially designed components and accessories, other than those specified in the CML or in Regulation (EU) 2021/821.

Note:

X.A.VIII.017 applies to restraint devices used in law enforcement activities. It does not apply to medical devices that are equipped to restrain patient movement during medical procedures. It does not apply to devices that confine memory impaired patients to appropriate medical facilities. It does not apply to safety equipment such as safety belts or child automobile safety seats.

X.A.VIII.018

Oil and gas exploration equipment, software, and data, as follows (see List of Items Controlled):

a.

Not used.

b.

Hydraulic fracturing items, as follows:

1.

Hydraulic fracturing design and analysis software and data;

2.

Hydraulic fracturing ‘proppant’, ‘fracking fluid’, and chemical additives therefor; or

3.

High pressure pumps.

Technical Note:

A ‘proppant’ is a solid material, typically treated sand or man-made ceramic materials, designed to keep an induced hydraulic fracture open, during or following a fracturing treatment. It is added to a ‘fracking fluid’ which may vary in composition depending on the type of fracturing used, and can be gel, foam or slickwater-based.

X.A.VIII.019

Specific processing equipment, as follows (see List of Items Controlled):

a.

Ring Magnets;

b.

Not used.

X.B.VIII.001

Specific processing equipment, as follows (see List of Items Controlled):

a.

Hot cells; or

b.

Glove boxes suitable for use with radioactive materials.

X.D.VIII.004

“Software” specially designed for the “development,”“production” or “use” of commodities controlled by X.A.VIII.014.

X.D.VIII.005

Specific software, as follows (see List of Items Controlled):

a.

Software for neutronic calculations/modeling;

b.

Software for radiation transport calculations/modeling; or

c.

Software for hydrodynamic calculations/modeling.

X.E.VIII.005

“Technology”‘‘required’’ for the ‘‘development’’ or ‘‘production’’ of commodities controlled by X.A.VIII.014.

X.E.VIII.006

“Technology” exclusively for the “development” or “production” of equipment controlled by X.A.VIII.017.

Category IX – Special Materials and Related Equipment

X.A.IX.001

Chemical agents, including tear gas formulation containing 1 % or less of orthochlorobenzalmalononitrile (CS), or 1 % or less of chloroacetophenone (CN), except in individual containers with a net weight of 20 g or less; liquid pepper except when packaged in individual containers with a net weight of 85,05 g or less; smoke bombs; non-irritant smoke flares, canisters, grenades and charges; and other pyrotechnic articles having dual military and commercial use, and components specially designed therefor, other than those specified in the CML or in Regulation (EU) 2021/821.

X.A.IX.002

Fingerprinting powders, dyes, and inks.

X.A.IX.003

Protective and detection equipment not specially designed for military use and not controlled by 1A004 or 2B351, as follows (see List of Items Controlled), and components not specially designed for military use and not controlled by 1A004 or 2B351 therefor:

a.

Personal radiation monitoring dosimeters; or

b.

Equipment limited by design or function to protect against hazards specific to civil industries, such as mining, quarrying, agriculture, pharmaceuticals, medical, veterinary, environmental, waste management, or to the food industry.

Note:

X.A.IX.003 does not control items for protection against chemical or biological agents that are consumer goods, packaged for retail sale or personal use, or medical products, such as latex exam gloves, latex surgical gloves, liquid disinfectant soap, disposable surgical drapes, surgical gowns, surgical foot covers, and surgical masks.

X.A.IX.004

Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

a.

Radiation detection, monitoring and measurement equipment, other than those specified in the CML or in Regulation (EU) 2021/821; or

b.

Radiographic detection equipment such as X-ray converters, and storage phosphor image plates.

X.B.IX.001

Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

a.

Electrolytic cells for fluorine production, other than those specified in the CML or in Regulation (EU) 2021/821;

b.

Particle accelerators;

c.

Industrial process control hardware/systems designed for power industries, other than those specified in the CML or in Regulation (EU) 2021/821; or

e.

Equipment for the production of structural composites, fibres, prepregs and preforms.

X.C.IX.004

Fibrous and filamentary materials, not controlled by 1C010 or 1C210, for use in “composite” structures and with a specific modulus of 3,18 x 106 m or greater and a specific tensile strength of 7,62 x 104 m or greater.

X.C.IX.005

“Vaccines”, “immunotoxins”, ‘medical products’, ‘diagnostic and food testing kits’, as follows (see List of Items controlled):

a.

“Vaccines” containing, or designed for use against, items controlled by 1C351, 1C353 or 1C354;

b.

“Immunotoxins” containing items controlled by 1C351.d; or

c.

‘Medical products’ that contain any of the following:

1.

“Toxins” controlled by 1C351.d (except for botulinum toxins controlled by 1C351.d.1, conotoxins controlled by 1C351.d.3, or items controlled for CW reasons under 1C351.d.4 or .d.5); or

2.

Genetically modified organisms or genetic elements controlled by 1C353.a.3 (except for those that contain, or code for, botulinum toxins controlled by 1C351.d.1 or conotoxins controlled by 1C351.d.3);

d.

‘Medical products’ not controlled by X.C.IX.005.c that contain any of the following:

1.

Botulinum toxins controlled by 1C351.d.1;

2.

Conotoxins controlled by 1C351.d.3; or

3.

Genetically modified organisms or genetic elements controlled by 1C353.a.3 that contain, or code for, botulinum toxins controlled by 1C351.d.1 or conotoxins controlled by 1C351.d.3; or

e.

‘Diagnostic and food testing kits’ containing items controlled by 1C351.d (except for items controlled for CW reasons under 1C351.d.4 or .d.5).

Technical Notes:

1.

‘Medical products’ are: (1) pharmaceutical formulations designed for testing and human (or veterinary) administration in the treatment of medical conditions, (2) prepackaged for distribution as clinical or medical products, and (3) approved by the European Medicines Agency (EMA) either to be marketed as clinical or medical products or for use as research new drug.

2.

‘Diagnostic and food testing kits’ are specifically developed, packaged and marketed for diagnostic or public health purposes. Biological toxins in any other configuration, including bulk shipments, or for any other end-uses are controlled by 1C351.

X.C.IX.006

Commercial charges and devices containing energetic materials, other than those specified in the CML or in Regulation (EU) 2021/821, and nitrogen trifluoride in a gaseous state (see List of Items Controlled):

a.

Shaped charges specially designed for oil well operations, utilizing one charge functioning along a single axis, that upon detonation produce a hole, and

1.

Contain any formulation of ‘controlled materials’;

2.

Have only a uniform shaped conical liner with an included angle of 90 degrees or less;

3.

Contain more than 0,010 kg but less than or equal to 0,090 kg of ‘controlled materials’; and

4.

Have a diameter not exceeding 114,3 cm;

b.

Shaped charges specially designed for oil well operations containing less than or equal to 0,010 kg of ‘controlled materials’;

c.

Detonation cord or shock tubes containing less than or equal to 0,064 kg/m of ‘controlled materials’;

d.

Cartridge power devices, that contain less than or equal to 0,70 kg of ‘controlled materials’ in the deflagration material;

e.

Detonators (electric or nonelectric) and assemblies thereof, that contain less than or equal to 0,01 kg of ‘controlled materials’;

f.

Igniters, that contain less than or equal to 0,01 kg of ‘controlled materials’;

g.

Oil well cartridges, that contain less than or equal to 0,015 kg of controlled ‘energetic materials’;

h.

Commercial cast or pressed boosters containing less than or equal to 1,0 kg of ‘controlled materials’;

i.

Commercial prefabricated slurries and emulsions containing less than or equal to 10,0 kg and less than or equal to 35 % by weight of ML8 ‘controlled materials’;

j.

Cutters and severing tools containing less than or equal to 3,5 kg of ‘controlled materials’;

k.

Pyrotechnic devices when designed exclusively for commercial purposes (e.g., theatrical stages, motion picture special effects, and fireworks displays) and containing less than or equal to 3,0 kg of ‘controlled materials’;

l.

Other commercial explosive devices and charges not controlled by X.C.IX.006.a through .k containing less than or equal to 1,0 kg of ‘controlled materials’; or

Note:

X.C.IX.006.l includes automotive safety devices; extinguishing systems; cartridges for riveting guns; explosive charges for agricultural, oil and gas operations, sporting goods, commercial mining, or public works purposes; and delay tubes used in the assembly of commercial explosive devices.

m.

Nitrogen trifluoride (NF3) in a gaseous state.

Notes:

1.

‘Controlled materials’ means controlled energetic materials (see 1C011, 1C111, 1C239 or ML8).

2.

Nitrogen trifluoride when not in a gaseous state is controlled under ML8.d by the CML.

X.C.IX.007

Mixtures not controlled by 1C350 or 1C450 that contain chemicals controlled by 1C350 or 1C450 and medical, analytical, diagnostic, and food testing kits not controlled by 1C350 or 1C450 that contain chemicals controlled by 1C350, as follows (see List of Items Controlled):

a.

Mixtures containing the following concentrations of precursor chemicals controlled by 1C350:

1.

Mixtures containing 10 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C350;

2.

Mixtures containing less than 30 %, by weight, of:

a.

Any single CWC Schedule 3 chemical controlled by 1C350; or

b.

Any single non-CWC precursor chemical controlled by 1C350;

b.

Mixtures containing the following concentrations of toxic or precursor chemicals controlled by 1C450:

1.

Mixtures containing the following concentrations of CWC Schedule 2 chemicals controlled by 1C450:

a.

Mixtures containing 1 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C450.a.1 and a.2 (i.e., mixtures containing Amiton or PFIB); or

b.

Mixtures containing 10 % or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C450.b.1, b.2, b.3, b.4, b.5, or b.6;

2.

Mixtures containing less than 30 %, by weight, of any single CWC Schedule 3 chemical controlled by 1C450.a.4, a.5., a.6., a.7, or 1C450.b.8;

c.

‘Medical, analytical, diagnostic, and food testing kits’ that contain precursor chemicals controlled by 1C350 in an amount not exceeding 300 grams per chemical.

Technical Note:

For the purpose of this entry, ‘medical, analytical, diagnostic, and food testing kits’ are pre-packaged materials of defined composition that are specifically developed, packaged and marketed for medical, analytical, diagnostic, or public health purposes. Replacement reagents for medical, analytical, diagnostic, and food testing kits described in X.C.IX.007.c are controlled by 1C350 if the reagents contain at least one of the precursor chemicals identified in that entry in concentrations equal to or greater than the control levels for mixtures indicated in 1C350.

X.C.IX.008

Non-fluorinated polymeric substances, not controlled by 1C008, as follows (see List of Items Controlled):

a.

Polyarylene ether ketones, as follows:

1.

Polyether ether ketone (PEEK);

2.

Polyether ketone ketone (PEKK);

3.

Polyether ketone (PEK); or

4.

Polyether ketone ether ketone ketone (PEKEKK);

b.

Not used.

X.C.IX.009

Specific materials, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

a.

Hardened steel and tungsten carbide precision ball bearings (3 mm or greater diameter);

b.

304 and 316 stainless steel plate, other than those specified in the CML or in Regulation (EU) 2021/821;

c.

Monel plate;

d.

Tributyl phosphate (CAS 126-73-8);

e.

Nitric acid (CAS 7697-37-2) in concentrations of 20 % weight or greater;

f.

Fluorine (CAS 7782-41-4); or

g.

Alpha-emitting radionuclides, other than those specified in the CML or in Regulation (EU) 2021/821.

X.C.IX.010

Aromatic polyamides (aramids) not controlled by 1C010, 1C210 or X.C.IX.004, presented in any of the following forms (see List of Items Controlled):

a.

Primary forms;

b.

Filament yarn or monofilaments;

c.

Filament tows;

d.

Rovings;

e.

Staple or chopped fibres;

f.

Fabrics;

g.

Pulp or flocks.

X.C.IX.011

Nanomaterials as follows (see List of Items Controlled):

a.

Semiconductor nanomaterials;

b.

Composite-based nanomaterials; or

c.

Any of the following carbon-based nanomaterials:

1.

Carbon nanotubes;

2.

Carbon nanofibres;

3.

Fullerenes;

4.

Graphenes; or

5.

Carbon onions.

Notes:

For the purpose of X.C.IX.011, nanomaterial means a material that meets at least one of the following criteria:

1.

Consists of particles, with one or more external dimensions in the size range 1 - 100 nm for more than 1 % of their number size distribution;

2.

Has internal or surface structures in one or more dimensions in the size range 1 - 100 nm; or

3.

Has a specific surface area by volume greater than 60 m2/cm3, excluding materials consisting of particles with a size lower than 1 nm.

X.D.IX.001

Specific software, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

a.

Software specially designed for industrial process control hardware/systems controlled by X.B.IX.001, other than those specified in the CML or in Regulation (EU) 2021/821; or

b.

Software specially designed for equipment for the production of structural composites, fibres, prepregs and preforms controlled by X.B.IX.001, other than those specified in the CML or in Regulation (EU) 2021/821.

X.E.IX.001

“Technology” for the “development”, “production”, or “use” of fibrous and filamentary materials controlled by X.C.IX.004 and X.C.IX.010.

X.E.IX.002

“Technology” for the “development”, “production”, or “use” of nanomaterials controlled by X.C.IX.011.

Category X – Materials Processing

X.A.X.001

Explosives or detonator detection equipment, both bulk and trace based, consisting of an automated device, or combination of devices for automated decision making to detect the presence of different types of explosives, explosive residue, or detonators; and components, other than those specified in the CML or in Regulation (EU) 2021/821:

a.

Explosives detection equipment for ‘automated decision making’ to detect and identify bulk explosives utilizing, but not limited to, X-ray (e.g., computed tomography, dual energy, or coherent scattering), nuclear (e.g., thermal neutron analysis, pulse fast neutron analysis, pulse fast neutron transmission spectroscopy, and gamma resonance absorption), or electromagnetic techniques (e.g., quadropole resonance and dielectrometry);

b.

Not used;

c.

Detonator detection equipment for automated decision making to detect and identify initiation devices (e.g. detonators, blasting caps) utilizing, but not limited to, X-ray (e.g. dual energy or computed tomography) or electromagnetic techniques.

Note:

Explosives or detonation detection equipment in X.A.X.001 includes equipment for screening people, documents, baggage, other personal effects, cargo and/or mail.

Technical Notes:

1.

‘Automated decision making is the ability of the equipment to detect explosives or detonators at the design or operator-selected level of sensitivity and provide an automated alarm when explosives or detonators at or above the sensitivity level are detected.

2.

This entry does not control equipment that depends on operator interpretation of indicators such as inorganic/organic color mapping of the items(s) being scanned.

3.

Explosives and detonators include commercial charges and devices controlled by X.C.VIII.004 and X.C.IX.006 and energetic materials controlled by 1C011, 1C111 and 1C239.

X.A.X.002

Concealed object detection equipment operating in the frequency range from 30 GHz to 3 000 GHz and having a spatial resolution of 0,1 mrad (milliradian) up to and including 1 mrad (milliradian) at a standoff distance of 100 m; and components, other than those specified in the CML or in Regulation (EU) 2021/821.

Note:

Concealed object detection equipment includes but is not limited to equipment for screening people, documents, baggage, other personal effects, cargo and/or mail.

Technical Note:

The range of frequencies span what is generally considered as the millimetre-wave, submillimetre-wave and terahertz frequency regions.

X.A.X.003

Bearings and bearing systems not controlled by 2A001 (see List of Items Controlled):

a.

Ball bearings or Solid ball bearings, having tolerances specified by the manufacturer in accordance with ABEC 7, ABEC 7P, or ABEC 7T or ISO Standard Class 4 or better (or equivalents) and having any of the following characteristics;

1.

Manufactured for use at operating temperatures above 573 K (300°C) either by using special materials or by special heat treatment; or

2.

With lubricating elements or component modifications that, according to the manufacturer's specifications, are specially designed to enable the bearings to operate at speeds exceeding 2,3 million ‘DN’;

b.

Solid tapered roller bearings, having tolerances specified by the manufacturer in accordance with ANSI/AFBMA Class 00 (inch) or Class A (metric) or better (or equivalents) and having either of the following characteristics;

1.

With lubricating elements or component modifications that, according to the manufacturer's specifications, are specially designed to enable the bearings to operate at speeds exceeding 2,3 million ‘DN’; or

2.

Manufactured for use at operating temperatures below 219 K (-54°C) or above 423 K (150°C);

c.

Gas-lubricated foil bearing manufactured for use at operating temperatures of 561 K (288°C) or higher and a unit load capacity exceeding 1 MPa;

d.

Active magnetic bearing systems;

e.

Fabric-lined self-aligning or fabric-lined journal sliding bearings manufactured for use at operating temperatures below 219 K (-54°C) or above 423 K (150°C).

Technical Notes:

1.

‘DN’ is the product of the bearing bore diameter in mm and the bearing rotational velocity in rpm.

2.

Operating temperatures include those temperatures obtained when a gas turbine engine has stopped after operation

X.A.X.004

Piping, fittings and valves made of, or lined with stainless, copper-nickel alloy or other alloy steel containing 10 % or more nickel and/or chromium:

a.

Pressure tube, pipe, and fittings of 200 mm or more inside diameter, and suitable for operation at pressures of 3,4 MPa or greater;

b.

Pipe valves having all of the following characteristics that are not controlled by 2B350.g:

1.

A pipe size connection of 200 mm or more inside diameter; and

2.

Rated at 10,3 MPa or more.

Notes:

1.

See X.D.X.005 for software for items controlled under this entry.

2.

See 2E001 (“development”), 2E002 (“production”), and X.E.X.003 (“use”) for technology for items controlled under this entry.

3.

See related controls 2A226, 2B350 and X.B.X.010.

X.A.X.005

Pumps designed to move molten metals by electromagnetic forces.

Notes:

1.

See X.D.X.005 for software for items controlled under this entry.

2.

See 2E001 (“development”), 2E002 (“production”), and X.E.X.003 (“use”) for technology for items controlled under this entry.

3.

Pumps for use in liquid-metal-cooled reactors are controlled by 0A001.

X.A.X.006

‘Portable electric generators’ and specially designed components.

Technical Note:

‘Portable electric generators’ – The generators that are in X.A.X.006 are portable – 2 268 kg or less on wheels or transportable in a 2,5 tonnes truck without a special set up requirement.

X.A.X.007

Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

a.

Bellows sealed valves;

b.

Not used.

X.B.X.004

Numerical control units for machine tools and “numerically controlled” machine tools, other than those specified in the CML or in Regulation (EU) 2021/821 (see List of Items Controlled):

a.

“Numerical control” units for machine tools:

1.

Having four interpolating axes that can be coordinated simultaneously for contouring control; or

2.

Having two or more axes that can be coordinated simultaneously for contouring control and a minimum programmable increment better (less) than 0,001 mm;

3.

“Numerical control” units for machine tools having two, three or four interpolating axes that can be coordinated simultaneously for contouring control, and capable of receiving directly (on-line) and processing computer-aided-design (CAD) data for internal preparation of machine instructions; or

b.

Motion control boards specially designed for machine tools and having any of the following characteristics:

1.

Interpolation in more than four axes;

2.

Capable of real-time processing of data to modify tool path, feed rate and spindle data, during the machining operation, by any of the following:

a.

Automatic calculation and modification of part program data for machining in two or more axes by means of measuring cycles and access to source data; or

b.

Adaptive control with more than one physical variable measured and processed by means of a computing model (strategy) to change one or more machining instructions to optimize the process; or

3.

Capable of receiving and processing CAD data for internal preparation of machine instructions;

c.

“Numerically controlled” machine tools that, according to the manufacturer's technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes and that have both of the following characteristics:

1.

Two or more axes that can be coordinated simultaneously for contouring control; and

2.

Positioning accuracies according to ISO 230/2 (2006), with all compensations available:

a.

Better than 15 μm along any linear axis (overall positioning) for grinding machines;

b.

Better than 15 μm along any linear axis (overall positioning) for milling machines; or

c.

Better than 15 μm along any linear axis (overall positioning) for turning machines; or

d.

Machine tools, as follows, for removing or cutting metals, ceramics or composites, that, according to the manufacturer's technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes:

1.

Machine tools for turning, grinding, milling or any combination thereof, having two or more axes that can be coordinated simultaneously for contouring control and having any of the following characteristics:

a.

One or more contouring “tilting spindles”;

Note:

X.B.X.004.d.1.a. applies to machine tools for grinding or milling only.

b.

“Camming” (axial displacement) in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR);

Note:

X.B.X.004.d.1.b. applies to machine tools for turning only.

c.

“Run out” (out-of-true running) in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); or

d.

The “positioning accuracies”, with all compensations available, are less (better) than: 0,001° on any rotary axis;

2.

Electrical discharge machines (EDM) of the wire feed type that have five or more axes that can be coordinated simultaneously for contouring control.

X.B.X.005

Non-"numerically controlled” machine tools for generating optical quality surfaces, (see List of Items Controlled) and specially designed components therefor:

a.

Turning machines using a single point cutting tool and having all of the following characteristics:

1.

Slide positioning accuracy less (better) than 0,0005 mm per 300 mm of travel;

2.

Bidirectional slide positioning repeatability less (better) than 0,00025 mm per 300 mm of travel;

3.

Spindle “run out” and “camming” less (better) than 0,0004 mm total indicator reading (TIR);

4.

Angular deviation of the slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel; and

5.

Slide perpendicularity less (better) than 0,001 mm per 300 mm of travel;

Technical Note:

The bidirectional slide positioning repeatability (R) of an axis is the maximum value of the repeatability of positioning at any position along or around the axis determined using the procedure and under the conditions specified in part 2.11 of ISO 230/2: 1988.

b.

Fly cutting machines having all of the following characteristics:

1.

Spindle “run out” and “camming” less (better) than 0,0004 mm TIR; and

2.

Angular deviation of slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel.

X.B.X.006

Gearmaking and/or finishing machinery not controlled by 2B003 capable of producing gears to a quality level of better than AGMA 11.

X.B.X.007

Dimensional inspection or measuring systems or equipment not controlled by 2B006 or 2B206, as follows (see List of Items Controlled):

a.

Manual dimensional inspection machines, having both of the following characteristics:

1.

Two or more axes; and

2.

A measurement uncertainty equal to or less (better) than (3 + L/300) μm in any axes (L measured length in mm).

X.B.X.008

“Robots” not controlled by 2B007 or 2B207 that are capable of employing feedback information in real-time processing from one or more sensors to generate or modify programs or to generate or modify numerical program data.

X.B.X.009

Assemblies, circuit boards or inserts specially designed for machine tools controlled by X.B.X.004, or for equipment controlled by X.B.X.006, X.B.X.007 or X.B.X.008:

a.

Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (“run out”) or axial (“camming”) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR);

b.

Single point diamond cutting tool inserts, having all of the following characteristics:

1.

Flawless and chip-free cutting edge when magnified 400 times in any direction;

2.

Cutting radius from 0,1 to 5 mm inclusive; and

3.

Cutting radius out-of-roundness less (better) than 0,002 mm TIR.

c.

Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer's specifications, “numerical control” units, machine tools or feed-back devices to or above the levels specified in X.B.X.004, X.B.X.006, X.B.X.007, X.B.X.008, or X.B.X.009.

Technical Note:

This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.

X.B.X.010

Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

a.

Isostatic presses, other than those specified in the CML or in Regulation (EU) 2021/821;

b.

Bellows manufacturing equipment, including hydraulic forming equipment and bellows forming dies;

c.

Laser welding machines;

d.

MIG welders;

e.

E-beam welders;

f.

Monel equipment, including valves, piping, tanks and vessels;

g.

304 and 316 stainless steel valves, piping, tanks and vessels;

Note:

Fittings are considered part of piping for purposes of X.B.X.010.g.

h.

Mining and drilling equipment, as follows:

1.

Large boring equipment capable of drilling holes greater than 61 cm in diameter;

2.

Large earth-moving equipment used in the mining industry;

i.

Electroplating equipment designed for coating parts with nickel or aluminum;

j.

Pumps designed for industrial service and for use with an electrical motor of 5 HP or greater;

k.

Vacuum valves, piping, flanges, gaskets and related equipment specially designed for use in high-vacuum service, other than those specified in the CML or in Regulation (EU) 2021/821;

l.

Spin forming and flow forming machines, other than those specified in the CML or in Regulation (EU) 2021/821;

m.

Centrifugal multiplane balancing machines, other than those specified in the CML or in Regulation (EU) 2021/821;

n.

Austenitic stainless steel plate, valves, piping, tanks and vessels.

X.D.X.001

“Software” specially designed or modified for the “development”, “production” or “use” of equipment controlled by X.A.X.001.

X.D.X.002

“Software”“required” for the “development”, “production” or “use” of concealed object detection equipment controlled by X.A.X.002.

X.D.X.003

“Software” specially designed for the “development”, “production”, or “use” of equipment controlled by X.B.X.004, X.B.X.006, or X.B.X.007, X.B.X.008, and X.B.X.009.

X.D.X.004

Specific “software”, as follows (see List of Items Controlled):

a.

“Software” to provide adaptive control and having both of the following characteristics:

1.

For flexible manufacturing units (FMUs); and

2.

Capable of generating or modifying, in real-time processing, programs or data by using the signals obtained simultaneously by means of at least two detection techniques, such as:

a.

Machine vision (optical ranging);

b.

Infrared imaging;

c.

Acoustical imaging (acoustical ranging);

d.

Tactile measurement;

e.

Inertial positioning;

f.

Force measurement; and

g.

Torque measurement.

Note:

X.D.X.004.a does not control “software” which only provides rescheduling of functionally identical equipment within ‘flexible manufacturing units’ using pre-stored part programs and a pre-stored strategy for the distribution of the part programs.

b.

Not used.

X.D.X.005

“Software” specially designed or modified for the “development,”“production,” or “use” of items controlled by X.A.X.004 or X.A.X.005.

Note:

See 2E001 (“development”) for “technology” for “software” controlled under this entry.

X.D.X.006

“Software” specially designed for the “development” or “production” of portable electric generators controlled by X.A.X.006.

X.E.X.001

“Technology”“required” for the “development, “production” or “use” of equipment controlled by X.A.X.002 or required for the “development” of “software” controlled by X.D.X.002.

Note:

See X.A.X.002 and X.D.X.002 for related commodity and software controls.

X.E.X.002

“Technology” for the “use” of equipment controlled by X.B.X.004, X.B.X.006, X.B.X.007, or X.B.X.008.

X.E.X.003

“Technology” according to the General Technology Note for the “use” of equipment controlled by X.A.X.004 or X.A.X.005.

X.E.X.004

“Technology” for the “use” of portable electric generators controlled by X.A.X.006.’.


ANNEX III

Annex IX to Regulation (EU) No 833/2014 is replaced by the following:

‘ANNEX IX

A.   Model for supply, transfer or export notification, application and authorisation forms

(referred to in Article 2c of this Regulation)

The export authorisation is valid in all Member States of the European Union until its expiry date.

EUROPEAN UNION

EXPORT AUTHORISATION / NOTIFICATION

(Reg. (EU) 2022/328)

If notifying pursuant to Article 2(3) or 2a(3) of Council Regulation (EU) No 833/2014, indicate what point(s) applies/apply:

☐ (a)

humanitarian purposes, health emergencies, the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment or as a response to natural disasters;

☐ (b)

medical or pharmaceutical purposes;

☐ (c)

temporary export of items for use by news media;

☐ (d)

software updates;

☐ (e)

use as consumer communication devices;

☐ (f)

personal use of natural persons travelling to Russia or members of their immediate families travelling with them, and limited to personal effects, household effects, vehicles or tools of trade owned by the individuals and not intended for sale

For authorisations, indicate if this has been requested pursuant to Article 2(4), 2(5), 2a(4), 2a(5) or 2b(1) of Council Regulation (EU) No 833/2014:

For authorisations pursuant to Article 2(4) or 2a(4) of Council Regulation (EU) No 833/2014, indicate what point(s) applies/apply:

☐ (a)

intended for cooperation between the Union, the governments of Member States and the government of Russia in purely civilian matters;

☐ (b)

intended for intergovernmental cooperation in space programmes;

☐ (c)

intended for the operation, maintenance, fuel retreatment and safety of civil nuclear capabilities, as well as civil nuclear cooperation, notably in the field of research and development;

☐ (d)

intended for maritime safety;

☐ (e)

intended for civilian non-publicly available electronic communications networks which are not the property of an entity that is publicly controlled or with over 50 % public ownership;

☐ (f)

intended for the exclusive use of entities owned, or solely or jointly controlled by a legal person, entity or body which is incorporated or constituted under the law of a Member State or of a partner country;

☐ (g)

for the diplomatic representations of the Union, Member States and partner countries, including delegations, embassies and missions;

☐ (h)

ensuring cyber-security and information security for natural and legal persons, entities and bodies in Russia except for its government and undertakings directly or indirectly controlled by that government.

For authorisations pursuant to Article 2b(1) of Council Regulation (EU) No 833/2014, indicate what point applies:

☐ (a)

urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment;

☐ (b)

contracts concluded before 26 February 2022, or ancillary contracts necessary for the execution of such a contract, provided that the authorisation is requested before 1 May 2022.


1

1.

Exporter

2.

Identification number

3.

Expiry date (if applicable)

 

4.

Contact point details

5.

Consignee

6.

Issuing authority

7.

Agent/Representative (if different from exporter)

8.

Country of consignment

Code (1)

9.

End user (if different from consignee)

10.

Member State of current or future location of the items

Code 2

11.

Member State of intended entry into the customs export procedure

Code 2

1

12.

Country of final destination

Code 2

Confirm that the end user is non military

Yes/No


 

13.

Description of the items (2)

14.

Country of origin

Code 2

15.

Harmonised System or Combined Nomenclature Code (if applicable with 8 digit; CAS number if available)

16.

Control list no (for listed items)

17.

Currency and Value

18.

Quantity of the items

19.

End use

Confirm that the end use is non military

Yes/No

20.

Contract date (if applicable)

21.

Customs export procedure

22.

Additional information:

Available for pre-printed information

At discretion of Member States

 

For completion by

issuing authority

Stamp

Signature

Issuing Authority

 

 

Date


EUROPEAN UNION

(Reg. (EU) 2022/328)

1

Bis

1.

Exporter

2.

Identification number

 

 

 

 

 

13.

Description of the items

14.

Country of origin

Code 2

15.

Commodity code (if applicable with 8 digit; CAS number if available )

16.

Control list no (for listed items)

17.

Currency and Value

18.

Quantity of the items

 

13.

Description of the items

14.

Country of origin

Code 2

15.

Commodity code (if applicable with 8 digit; CAS number if available )

16.

Control list no (for listed items)

17.

Currency and Value

18.

Quantity of the items

 

13.

Description of the items

14.

Country of origin

Code 2

15.

Commodity code

16.

Control list no

17.

Currency and value

18.

Quantity of the items

 

13.

Description of the items

14.

Country of origin

Code2

15.

Commodity code

16.

Control list no

17.

Currency and value

18.

Quantity of the items

 

13.

Description of the items

14.

Country of origin

Code2

15.

Commodity code

16.

Control list no

17.

Currency and value

18.

Quantity of the items

 

13.

Description of the items

14.

Country of origin

Code 2

15.

Commodity code

16.

Control list no

17.

Currency and value

18.

Quantity of the items


Note: In part 1 of column 24, write the quantity still available and in part 2 of column 24, write the quantity deducted on this occasion.

23.

Net quantity/value (Net mass/other unit with indication of unit)

26.

Customs document (Type and number) or extract (Nr) and date of deduction

27.

Member state, name and signature, stamp of deduction

24.

In numbers

25.

In words for quantity/value deducted

1.

 

 

 

2.

1.

 

 

 

2.

1.

 

 

 

2.

1.

 

 

 

2.

1.

 

 

 

2.

1.

 

 

 

2.

A.   Model for brokering services/ technical assistance notification, application and authorisation forms

(referred to in Article 2C of this Regulation)

EUROPEAN UNION

PROVISION OF TECHNICAL ASSISTANCE

(Reg. (EU) 2022/328)

If notifying pursuant to Article 2(3) or 2a(3) of Council Regulation (EU) No 833/2014, indicate what point(s) applies/apply:

☐ (a)

humanitarian purposes, health emergencies, the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment or as a response to natural disasters;

☐ (b)

medical or pharmaceutical purposes;

☐ (c)

temporary export of items for use by news media;

☐ (d)

software updates;

☐ (e)

use as consumer communication devices;

☐ (f)

personal use of natural persons travelling to Russia or members of their immediate families travelling with them, and limited to personal effects, household effects, vehicles or tools of trade owned by the individuals and not intended for sale.

For authorisations, indicate if this has been requested pursuant to Article 2(4), 2(5), 2a(4), 2a(5) or 2b(1) of Council Regulation (EU) No 833/2014:

For authorisations pursuant to Article 2(4) or 2a(4) of Council Regulation (EU) No 833/2014, indicate what point(s) applies/apply:

☐ (a)

intended for cooperation between the Union, the governments of Member States and the government of Russia in purely civilian matters;

☐ (b)

intended for intergovernmental cooperation in space programmes;

☐ (c)

intended for the operation, maintenance, fuel retreatment and safety of civil nuclear capabilities, as well as civil nuclear cooperation, notably in the field of research and development;

☐ (d)

intended for maritime safety;

☐ (e)

intended for civilian non-publicly available electronic communications networks which are not the property of an entity that is publicly controlled or with over 50 % public ownership;

☐ (f)

intended for the exclusive use of entities owned, or solely or jointly controlled by a legal person, entity or body which is incorporated or constituted under the law of a Member State or of a partner country;

☐ (g)

for the diplomatic representations of the Union, Member States and partner countries, including delegations, embassies and missions;

☐ (h)

ensuring cyber-security and information security for natural and legal persons, entities and bodies in Russia except for its government and undertakings directly or indirectly controlled by that government.

For authorisations pursuant to Article 2b(1) of Regulation Council (EU) No 833/2014, indicate what point applies:

☐ (a)

urgent prevention or mitigation of an event likely to have a serious and significant impact on human health and safety or the environment;

☐ (b)

contracts concluded before 26 February 2022, or ancillary contracts necessary for the execution of such a contract, provided that the authorisation is requested before 1 May 2022.


1

1.

Broker/ Supplier of technical assistance/ Applicant

2.

Identification number

3.

Expiry date (if applicable)

 

4.

Contact point details

5.

Exporter in originating third country (if applicable)

6.

Issuing authority

7.

Consignee

8.

Member State in which the broker / supplier of technical assistance is resident or established

Code (3)

9.

Originating country/ Country of location of the items subject of brokering services

Code 1

10.

End user in third country of destination (if different from consignee)

11.

Country of destination

Code 1

12.

Third parties involved, e.g. agents (if applicable)

 

1

Confirm that the end user is non military

Yes/No


 

13.

Description of the items / technical assistance.

14.

Harmonised System or Combined Nomenclature Code (if applicable)

15.

Control list no (if applicable)

16.

Currency and Value

17.

Quantity of the items (if applicable)

18.

End use

Confirm that the end use is non military

Yes/No

19.

Additional information:

Available for pre-printed information

At discretion of Member States

 

For completion by issuing authority

Signature

Stamp

Issuing Authority

 

 

Date


(1)  See Regulation (EC) No 1172/95 (OJ L 118, 25.5.1995, p. 10).

(2)  If needed, this description may be given in one or more attachments to this form (1bis). In this case, indicate the exact number of attachments in this box. The description should be as precise as possible and integrate, where relevant, the CAS or other references for chemical items in particular.

(3)  See Regulation (EC) No 1172/95 (OJ L 118, 25.5.1995, p. 10).


ANNEX IV

Annex X to Regulation (EU) No 833/2014 is replaced by the following:

‘ANNEX X

List of goods and technologies referred to in Article 3b(1)

 

CN

Product

ex

8414 10 81

Cryogenic pumps in the LNG-process

ex

8418 69 00

Process units for gas cooling in the LNG-process

ex

8419 40 00

Atmospheric-vacuum crude distillation units (CDU)

ex

8419 40 00

Process units for the separation and fractionation of the hydrocarbons in the LNG-process

ex

8419 50 20 , 8419 50 80

Cold boxes in the LNG-process

ex

8419 50 20 , 8419 50 80

Cryogenic exchangers in the LNG-process

ex

8419 60 00

Process units for the liquefaction of the natural gas

ex

8419 60 00 , 8419 89 98 , 8421 39 15 , 8421 39 25 , 8421 39 35 , 8421 39 85

Hydrogen recovery and purification technology

ex

8419 60 00 , 8419 89 98 , 8421 39 35 , 8421 39 85

Refinery fuel gas treatment and sulphur recovery technology (including amine scrubbing units, sulphur recovery units, tail gas treatment units)

ex

8419 89 10

Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water, designed to be used with the technology listed in this Annex.

ex

8419 89 98

Alkylation and isomerization units

ex

8419 89 98

Aromatic hydrocarbon production units

ex

8419 89 98

Catalytic reforming / cracker units

ex

8419 89 98

Delayed cokers

ex

8419 89 98

Flexicoking units

ex

8419 89 98

Hydrocracking reactors

ex

8419 89 98

Hydrocracking reactor vessels

ex

8419 89 98

Hydrogen generation technology

ex

8419 89 98

Hydrotreatment technology/units

ex

8419 89 98

Naphtha isomerisation units

ex

8419 89 98

Polymerisation units

ex

8419 89 98

Sulphur production units

ex

8419 89 98

Sulphuric acid alkylation and sulphuric acid regeneration units

ex

8419 89 98

Thermal cracking units

ex

8419 89 98

[Toluene and heavy aromatics] Transalkylation units

ex

8419 89 98

Visbreakers

ex

8419 89 98

Vacuum gas oil hydrocracking units

ex

8479 89 97

Solvent de-asphalting units


ANNEX V

In Annex XXII to Regulation (EU) No 833/2014 the title is replaced by:

‘List of coal and other products as referred to in Article 3j’.


ANNEX VI

Annex XXIII to Regulation (EU) No 833/2014 is replaced by the following:

‘ANNEX XXIII

LIST OF GOODS AND TECHNOLOGY AS REFERRED TO IN ARTICLE 3k

CN code

Name of the good

0601 10

Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, dormant

0601 20

Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, in growth or in flower; chicory plants and roots

0602 30

Rhododendrons and azaleas, grafted or not

0602 40

Roses, grafted or not

0602 90

Other live plants (including their roots), cuttings and slips; mushroom spawn - Other

0604 20

Foliage, branches and other parts of plants, without flowers or flower buds, and grasses, mosses and lichens, being goods of a kind suitable for bouquets or for ornamental purposes, fresh, dried, dyed, bleached, impregnated or otherwise prepared - Fresh

2508 40

Other clays

2508 70

Chamotte or dinas earths

2509 00

Chalk

2512 00

Siliceous fossil meals (for example, kieselguhr, tripolite and diatomite) and similar siliceous earths, whether or not calcined, of an apparent specific gravity of 1 or less

2515 12

Merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape

2515 20

Ecaussine and other calcareous monumental or building stone; alabaster

2518 20

Calcined or sintered dolomite

2519 10

Natural magnesium carbonate (magnesite)

2520 10

Gypsum; anhydrite

2521 00

Limestone flux; limestone and other calcareous stone, of a kind used for the manufacture of lime or cement

2522 10

Quicklime

2522 30

Hydraulic lime

2525 20

Mica powder

2526 20

Natural steatite, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape; talc - Crushed or powdered

2530 20

Kieserite, epsomite (natural magnesium sulphates)

2707 30

Xylol (xylenes)

2708 20

Pitch coke

2712 10

Petroleum jelly

2712 90

Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured:

2715 00

Bituminous mastics, cut-backs and other bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch - Other

2804 10

Hydrogen

2804 30

Nitrogen

2804 40

Oxygen

2804 61

Silicon - Containing by weight not less than 99,99 % of silicon

2804 80

Arsenic

2806 10

Hydrogen chloride (hydrochloric acid)

2806 20

Chlorosulphuric acid

2811 29

Other inorganic oxygen compounds of non-metals - Other

2813 10

Carbon disulphide

2814 20

Ammonia in aqueous solution

2815 12

Sodium hydroxide (caustic soda) - In aqueous solution (soda lye or liquid soda)

2818 30

aluminium hydroxide

2819 90

Chromium oxides and hydroxides - Other

2820 10

Manganese dioxide

2827 31

Other chlorides - Of magnesium

2827 35

Other chlorides - Of nikel

2828 90

Hypochlorites; commercial calcium hypochlorite; chlorites; hypobromites - Other

2829 11

Chlorates - Of sodium

2832 20

Sulphites (excluding sodium)

2833 24

Sulphates of nickel

2833 30

Alums

2834 10

Nitrites

2836 30

Sodium hydrogencarbonate (sodium bicarbonate)

2836 50

Calcium carbonate

2839 90

Silicates; commercial alkali metal silicates - Other

2840 30

Peroxoborates (perborates)

2841 50

Other chromates and dichromates; peroxochromates

2841 80

Tungstates (wolframates)

2843 10

Colloidal precious metals

2843 21

Silver nitrate

2843 29

Silver compounds - Other

2843 30

Gold compounds

2847 00

Hydrogen peroxide, whether or not solidified with urea

2901 23

Butene (butylene) and isomers thereof

2901 24

Buta-1,3-diene and isoprene

2901 29

Acyclic hydrocarbons - Unsaturated - Other

2902 11

Cyclohexane

2902 30

Toluene

2902 41

o-xylene

2902 43

p-xylene

2902 44

Mixed xylene isomers

2902 50

Styrene

2903 11

Chloromethane (methyl chloride) and chloroethane (ethyl chloride)

2903 12

Dichloromethane (methylene chloride)

2903 21

Vinyl chloride (chloroethylene)

2903 23

Tetrachloroethylene (perchloroethylene)

2903 29

Unsaturated chlorinated derivatives of acyclic hydrocarbons - Other

2903 76

Bromochlorodifluoromethane (Halon-1211 ), bromotrifluoromethane (Halon-1301 ) and dibromotetrafluoroethanes (Halon-2402 )

2903 81

1,2,3,4,5,6-Hexachlorocyclohexane (HCH (ISO)), including lindane (ISO, INN)

2903 91

Chlorobenzene, o-dichlorobenzene and p-dichlorobenzene

2904 10

Derivatives containing only sulpho groups, their salts and ethyl esters

2904 20

Derivatives containing only nitro or only nitroso groups

2904 31

Perfluorooctane sulphonic acid

2905 13

Butan-1-ol (n-butyl alcohol)

2905 16

Octanol (octyl alcohol) and isomers thereof

2905 19

Saturated monohydric alcohols - Other

2905 41

2-Ethyl-2-(hydroxymethyl)propane-1,3-diol (trimethylolpropane)

2905 59

Other polyhydric alcohols - Other

2906 13

Sterols and inositols

2906 19

Cyclanic, cyclenic or cycloterpenic -Other

2907 11

Phenol (hydroxybenzene) and its salts

2907 13

Octylphenol, nonylphenol and their isomers; salts thereof

2907 19

Monophenols - Other

2907 22

Hydroquinone (quinol) and its salts

2909 11

Pentachlorophenol (ISO)

2909 20

Cyclanic, cyclenic or cycloterpenic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives

2909 41

2,2′-Oxydiethanol (diethylene glycol, digol)

2909 43

Monobutyl ethers of ethylene glycol or of diethylene glycol

2909 49

Ether-alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives - Other

2910 10

Oxirane (ethylene oxide)

2910 20

Methyloxirane (propylene oxide)

2911 00

Acetals and hemiacetals, whether or not with other oxygen function, and their halogenated, sulphonated, nitrated or nitrosated derivat

2912 12

Ethanal (acetaldehyde)

2912 49

Aldehyde-alcohols, aldehyde-ethers, aldehyde-phenols and aldehydes with other oxygen function - Other

2912 60

Paraformaldehyde

2914 11

Acetone

2914 61

Anthraquinone

2915 13

Esters of formic acid

2915 90

Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives - Other

2916 12

Esters of acrylic acid

2916 13

Methacrylic acid and its salts

2916 14

Esters of methacrylic acid

2916 15

Oleic, linoleic or linolenic acids, their salts and esters

2917 33

Dinonyl or didecyl orthophthalates

2920 11

Parathion (ISO) and parathion-methyl (ISO) (methyl-parathion)

2921 22

Hexamethylenediamine and its salts

2921 41

Aniline and its salts

2922 11

Monoethanolamine and its salts

2922 43

Anthranilic acid and its salts

2923 20

Lecithins and other phosphoaminolipids

2930 40

Methionine

2933 54

Other derivatives of malonylurea (barbituric acid); salts thereof

2933 71

6-Hexanelactam (epsilon-caprolactam)

3201 90

Tanning extracts of vegetable origin; tannins and their salts, ethers, esters and other derivatives

3202 10

Synthetic organic tanning substances

3202 90

Synthetic organic tanning substances; inorganic tanning substances; tanning preparations, whether or not containing natural tanning substances; enzymatic preparations for pre-tanning

3203 00

colouring matter of vegetable or animal origin, incl. dye extracts (excl. animal black), whether or not chemically defined; preparations based on colouring matter of vegetable or animal origin of a kind used to dye fabrics or produce colorant preparations (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 ) - Other

3204 90

Synthetic organic colouring matter, whether or not chemically defined; preparations as specified in note 3 to this chapter based on synthetic organic colouring matter; synthetic organic products of a kind used as fluorescent brightening agents or as luminophores, whether or not chemically defined

3205 00

colour lakes (other than chinese or japanese lacquer and paints); preparations based on colour lakes of a kind used to dye fabrics or produce colorant preparations (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 )

3206 41

ultramarine and preparations based thereon of a kind used for colouring any material or produce colorant preparations (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 )

3206 49

inorganic or mineral colouring matter, n.e.s.; preparations based on inorganic or mineral colouring matter of a kind used for colouring any material or produce colorant preparations, n.e.s. (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 and inorganic products of a kind used as liminophores) - Other

3207 10

Prepared pigments, prepared opacifiers, prepared colours and similar preparations

3207 20

Engobes (slips)

3207 30

Liquid lustres and similar preparations

3207 40

Glass frit and other glass, in the form of powder, granules or flakes

3208 10

Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to Chapter 32 - Based on polyesters

3208 20

Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to Chapter 32 - Based on acrylic or vinyl polymers

3208 90

Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to Chapter 32 -

3209 10

paints and varnishes, incl. enamels and lacquers, based on acrylic or vinyl polymers, dispersed or dissolved in an aqueous medium

3209 90

paints and varnishes, incl. enamels and lacquers, based on synthetic or chemically modified natural polymers, dispersed or dissolved in an aqueous medium (excl. those based on acrylic or vinyl polymers) - Other

3210 00

Other paints and varnishes (including enamels, lacquers and distempers); prepared water pigments of a kind used for finishing leather

3212 90

Pigments (including metallic powders and flakes) dispersed in non- aqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels); stamping foils; dyes and other colouring matter put up in forms or packings for retail sale - Other

3214 10

Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings

3214 90

Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings; non-refractory surfacing preparations for façades, indoor walls, floors, ceilings or the like - Other

3215 11

Printing ink - Black

3215 19

Printing ink - Other

3403 11

Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals – Containing petroleum oils or oils obtained from bituminous minerals - Preparations for the treatment of textile materials, leather, furskins or other materials

3403 19

Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals – Containing petroleum oils or oils obtained from bituminous minerals - Other

3403 91

Preparations for the treatment of textile materials, leather, furskins or other materials

3403 99

Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals - Other

3505 10

Dextrins and other modified starches

3506 99

Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg- Other

3701 20

Instant print film

3701 91

For colour photography (polychrome)

3702 32

Other film, with silver halide emulsion

3702 39

Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposed - Other

3702 43

Other film, without perforations, of a width exceeding 105 mm - Of a width exceeding 610 mm and of a length not exceeding 200 m

3702 44

Other film, without perforations, of a width exceeding 105 mm - Of a width exceeding 105 mm but not exceeding 610 mm

3702 55

Other film, for colour photography (polychrome) - Of a width exceeding 16 mm but not exceeding 35 mm and of a length exceeding 30 mm

3702 56

Other film, for colour photography (polychrome) - Of a width exceeding 35 mm

3702 97

Other film, for colour photography (polychrome) - Of a width not exceeding 35 mm and of a length exceeding 30 mm

3702 98

photographic film, sensitised, in rolls, unexposed, with perforations, for monochrome photography, width > 35 mm (excl. of paper, paperboard and textiles; x-ray film)

3703 20

photographic paper, paperboard and textiles, sensitised, unexposed, for colour photography "polychrome" (excl. products in rolls > 610 mm wide)

3703 90

photographic paper, paperboard and textiles, sensitised, unexposed, for monochrome photography (excl. products in rolls > 610 mm wide)

3705 00

photographic plates and film, exposed and developed (excl. products made of paper, paperboard or textiles, cinematographic film and ready-to-use printing plates)

3706 10

cinematographic film, exposed and developed, whether or not incorporating soundtrack or consisting only of soundtrack, width >= 35 mm

3801 20

colloidal or semi-colloidal graphite

3806 20

salts of rosin, of resin acids or of derivatives of rosin or resin acids (excl. salts of rosin adducts)

3807 00

wood tar; wood tar oils; wood creosote; wood naphtha; vegetable pitch; brewer's pitch and similar preparations based on rosin, resin acids or vegetable pitch (excl. burgundy pitch, yellow pitch, stearin pitch, fatty acid pitch, fatty tar and glycerin pitch)

3809 10

finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations such as dressings and mordants of a kind used in the textile, paper, leather or like industries, n.e.s., based on starch or derivatives thereof

3809 91

finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the textile or similar industries, n.e.s. (excl. those with a basis of amylaceous substances)

3809 92

finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the paper or similar industries, n.e.s. (excl. those with a basis of amylaceous substances)

3809 93

finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the leather or similar industries, n.e.s. (excl. those with a basis of amylaceous substances)

3810 10

pickling preparations for metal surfaces; soldering, brazing or welding pastes and powders consisting of metal and other materials

3811 21

prepared additives for oil lubricants containing petroleum oil or bituminous mineral oil

3811 29

prepared additives for oil lubricants not containing petroleum oil or bituminous mineral oil

3811 90

oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives for mineral oils, incl. gasoline, or for other liquids used for the same purposes as mineral oils (excl. anti-knock preparations and oil lubricant additives)

3812 20

compound plasticisers for rubber or plastics, n.e.s.

3813 00

preparations and charges for fire-extinguishers; charged fire-extinguishing grenades (excl. full or empty fire-extinguishing devices, whether or not portable, unmixed chemically undefined products with fire-extinguishing properties in other forms)

3814 00

organic composite solvents and thinners, n.e.s.; prepared paint or varnish removers (excl. nail varnish remover)

3815 11

supported catalysts with nickel or a nickel compound as the active substance, n.e.s.

3815 12

supported catalysts with precious metal or a precious-metal compound as the active substance, n.e.s.

3815 19

supported catalysts, n.e.s. (excl. with precious metal, a precious-metal compound, nickel or a nickel compound as the active substance)

3815 90

reaction initiators, reaction accelerators and catalytic preparations, n.e.s. (excl. rubber accelerators and supported catalysts)

3816 00 10

Dolomite ramming mix

3817 00

mixed alkylbenzenes and mixed alkylnaphthalenes produced by the alkylation of benzene and naphthalene (excl. mixed isomers of cyclic hydrocarbons)

3819 00

hydraulic brake fluids and other prepared liquids for hydraulic transmission not containing petroleum oil or bituminous mineral oil, or containing < 70 % petroleum oil or bituminous mineral oil by weight

3820 00

anti-freezing preparations and prepared de-icing fluids (excl. prepared additives for mineral oils or other liquids used for the same purposes as mineral oils)

3823 13

tall oil fatty acids, industrial

3827 90

Mixtures containing halogenated derivatives of methane, ethane or propane (excl. those of subheadings 3824.71.00 to 3824.78.00)

3824 81

mixtures and preparations containing oxirane "ethylene oxide"

3824 84

mixtures and preparations containing aldrin (iso), camphechlor (iso) "toxaphene", chlordane (iso), chlordecone (iso), ddt (iso) "clofenotane (inn), 1,1,1-trichloro-2,2-bis"p-chlorophenyl"ethane", dieldrin "iso, inn", endosulfan (iso), endrin (iso), heptachlor (iso) or mirex (iso)

3824 99

chemical products and preparations of the chemical or allied industries, incl. those consisting of mixtures of natural products, n.e.s.

3825 90

residual products of the chemical or allied industries, n.e.s. (excl. waste)

3826 00

biodiesel and mixtures thereof, not containing or containing < 70 % by weight of petroleum oils or oils obtained from bituminous minerals

3901 40

ethylene-alpha-olefin copolymers, having a specific gravity of < 0,94, in primary forms

3902 20

polyisobutylene, in primary forms

3902 30

propylene copolymers, in primary forms

3902 90

polymers of propylene or of other olefins, in primary forms (excl. polypropylene, polyisobutylene and propylene copolymers)

3903 19

polystyrene, in primary forms (excl. expansible)

3903 90

polymers of styrene, in primary forms (excl. polystyrene, styrene-acrylonitrile copolymers "san" and acrylonitrile-butadiene-styrene "abs")

3904 10

poly"vinyl chloride", in primary forms, not mixed with any other substances

3904 50

vinylidene chloride polymers, in primary forms

3905 12

poly"vinyl acetate", in aqueous dispersion

3905 19

poly"vinyl acetate", in primary forms (excl. in aqueous dispersion)

3905 21

vinyl acetate copolymers, in aqueous dispersion

3905 29

vinyl acetate copolymers, in primary forms (excl. in aqueous dispersion)

3905 91

copolymers of vinyl, in primary forms (excl. vinyl chloride-vinyl acetate copolymers and other vinyl chloride copolymers, and vinyl acetate copolymers)

3906 10

poly"methyl methacrylate", in primary forms

3906 90

acrylic polymers, in primary forms (excl. poly"methyl methacrylate")

3907 21

polyethers, in primary forms (excl. polyacetals and goods of 3002 10 )

3907 40

polycarbonates, in primary forms

3907 70

poly"lactic acid", in primary forms

3907 91

unsaturated polyallyl esters and other polyesters, in primary forms (excl. polycarbonates, alkyd resins, poly"ethylene terephthalate" and poly"lactic acid")

3908 10

polyamides-6, -11, -12, -6,6, -6,9, -6,10 or -6,12, in primary forms

3908 90

polyamides, in primary forms (excl. polyamides-6, -11, -12, -6,6, -6,9, -6,10 and -6,12)

3909 20

melamine resins, in primary forms

3909 39

amino-resins, in primary forms (excl. urea, thiourea and melamine resins and mdi)

3909 40

phenolic resins, in primary forms

3909 50

polyurethanes, in primary forms

3912 11

non-plasticised cellulose acetates, in primary forms

3912 90

cellulose and chemical derivatives thereof, n.e.s., in primary forms (excl. cellulose acetates, cellulose nitrates and cellulose ethers)

3915 20

waste, parings and scrap, of polymers of styrene

3917 10

artificial guts "sausage casings" of hardened protein or cellulose materials

3917 23

rigid tubes, pipes and hoses, of polymers of vinyl chloride

3917 31

flexible tubes, pipes and hoses, of plastics, burst pressure >= 27,6 mpa

3917 32

flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, without fittings

3917 33

flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, with fittings, seals or connectors

3920 10

plates, sheets, film, foil and strip, of non-cellular polymers of ethylene, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918 )

3920 61

plates, sheets, film, foil and strip, of non-cellular polycarbonates, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. those of poly"methyl methacrylate", self-adhesive products, and floor, wall and ceiling coverings of heading 3918 )

3920 69

plates, sheets, film, foil and strip, of non-cellular polyesters, not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. polycarbonates, polythylene terephthalate and other unsaturated polyesters, self-adhesive products, and floor, wall and ceiling coverings in heading 3918 )

3920 73

plates, sheets, film, foil and strip, of non-cellular cellulose acetates, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918 )

3920 91

plates, sheets, film, foil and strip, of non-cellular poly"vinyl butyral", not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918 )

3921 19

plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl. those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006.10.30)

3922 90

bidets, lavatory pans, flushing cisterns and similar sanitary ware, of plastics (excl. baths, shower-baths, sinks, washbasins, lavatory seats and covers)

3925 20

doors, windows and their frames and thresholds for doors, of plastics

4002 11

styrene-butadiene rubber latex "sbr"; carboxylated styrene-butadiene rubber latex "xsbr"

4002 20

butadiene rubber "br", in primary forms or in plates, sheets or strip

4002 31

isobutylene isoprene rubber "iir", in primary forms or in plates, sheets or strip

4002 39

halo-isobutene-isoprene rubber "ciir" or "biir", in primary forms or in plates, sheets or strip

4002 41

chloroprene latex "chlorobutadiene rubber, cr"

4002 51

latex of acrylonitrile-butadiene rubber "nbr"

4002 80

mixtures of natural rubber, balata, gutta-percha, guayule, chicle or similar types of natural rubber with synthetic rubber or factice, in primary forms or in plates, sheets or strip

4002 91

synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip (excl. styrene-butadiene rubber "sbr", carboxylated styrene-butadiene rubber "xsbr", butadiene rubber "br", isobutylene isoprene rubber "iir", halo-isobutene-isoprene rubber "ciir" or "biir", chloroprene rubber "cr", acrylonitrile-butadiene rubber "nbr", isoprene rubber "ir" and non-conjugated ethylene-propylene diene rubber "epdm")

4002 99

synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip (excl. latex, styrene-butadiene rubber "sbr", carboxylated styrene-butadiene rubber "xsbr", butadiene rubber "br", isobutylene isoprene rubber "iir", halo-isobutene-isoprene rubber "ciir" or "biir", chloroprene rubber "cr", acrylonitrile-butadiene rubber "nbr", isoprene rubber "ir" and non-conjugated ethylene-propylene diene rubber "epdm")

4005 10

rubber, unvulcanised, compounded with carbon black or silica, in primary forms or in plates, sheets or strip

4005 20

compounded rubber, unvulcanised, in the form of solutions or dispersions (excl. rubber compounded with carbon black or silica, and mixtures of natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums containing synthetic rubber or factice derived from oils)

4005 91

compounded rubber, unvulcanised, in the form of plates, sheets or strip (excl. rubber compounded with carbon black or silica, and mixtures of natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums containing synthetic rubber or factice derived from oils)

4005 99

compounded, unvulcanised rubber in primary forms (excl. solutions and dispersions, those containing carbon black or silica, mixtures of natural rubber, balata, gutta-percha, guayule, chicle or similar types of natural rubber with synthetic rubber or factice, and those in the form of plates, sheets or strip)

4006 10

'camel-back' strips of unvulcanised rubber, for retreading rubber tyres

4008 21

plates, sheets and strip, of non-cellular rubber

4009 12

tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), not reinforced or otherwise combined with other materials, with fittings

4009 41

tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined with materials other than metal or textile materials, without fittings

4010 31

endless transmission belts of trapezoidal cross-section "v-belts", of vulcanised rubber, v-ribbed, of an outside circumference > 60 cm but <= 180 cm

4010 33

endless transmission belts of trapezoidal cross-section "v-belts", of vulcanised rubber, v-ribbed, of an outside circumference > 180 cm but <= 240 cm

4010 35

endless synchronous belts, of vulcanised rubber, of an outside circumference > 60 cm but <= 150 cm

4010 36

endless synchronous belts, of vulcanised rubber, of an outside circumference > 150 cm but <= 198 cm

4010 39

transmission belts or belting, of vulcanised rubber (excl. endless transmission belts of trapezoidal cross-section "v-belts", v-ribbed, of an outside circumference > 60 cm but <= 240 cm and endless synchronous belts of an outside circumference > 60 cm but <= 198 cm)

4012 11

retreaded pneumatic tyres, of rubber, of a kind used on motor cars "incl. station wagons and racing cars"

4012 13

retreaded pneumatic tyres, of rubber, of a kind used on aircraft

4012 19

retreaded pneumatic tyres, of rubber (excl. of a kind used on motor cars, station wagons, racing cars, buses, lorries and aircraft)

4012 20

used pneumatic tyres of rubber

4016 93

gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber)

4407 19

coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm (excl. pine "pinus spp.", fir "abies spp." and spruce "picea spp.")

4407 92

beech "fagus spp.", sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm

4407 94

cherry "prunus spp.", sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm

4407 97

poplar and aspen "populus spp.", sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm

4407 99

wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm (excl. tropical wood, coniferous wood, oak "quercus spp.", beech "fagus spp.", maple "acer spp.", cherry "prunus spp.", ash "fraxinus spp.", birch "betula spp.", poplar and aspen "populus spp.")

4408 10

sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm

4411 13

medium density fibreboard "mdf" of wood, of a thickness > 5 mm but <= 9 mm

4411 94

fibreboard of wood or other ligneous materials, whether or not agglomerated with resins or other organic bonding agents, of a density of <= 0,5 g/cm3 (excl. medium density fibreboard "mdf"; particle board, whether or not bonded with one or more sheets of fibreboard; laminated wood with a layer of plywood; cellular wood panels of which both sides are fibreboard; paperboard; identifiable furniture components)

4412 31

plywood consisting solely of sheets of wood <= 6 mm thick, with at least one outer ply of tropical wood (excl. sheets of compressed wood, cellular wood panels, inlaid wood and sheets identifiable as furniture components)

4412 33

plywood consisting solely of sheets of wood <= 6 mm thick, with at least one outer ply of non-coniferous wood (excl. of bamboo, with an outer ply of tropical wood or of alder, ash, beech, birch, cherry, chestnut, elm, eucalyptus, hickory, horse chestnut, lime, maple, oak, plane tree, poplar, aspen, robinia, tulipwood or walnut, and sheets of compressed wood, cellular wood panels, inlaid wood and sheets identifiable as furniture components)

4412 94

laminated wood as blockboard, laminboard or battenboard (excl. of bamboo, plywood consisting solely of sheets of wood <= 6 mm thick, sheets of compressed wood, inlaid wood and sheets identifiable as furniture components)

4416 00

casks, barrels, vats, tubs and other coopers' products parts thereof, of wood, incl. staves

4418 40

wooden shuttering for concrete constructional work (excl. plywood boarding)

4418 60

posts and beams, of wood

4418 79

flooring panels, assembled, of wood other than bamboo (excl. multilayer panels and panels for mosaic floors)

4503 10

corks and stoppers of all types, of natural cork, incl. round-edged blanks

4504 10

tiles of any shape, blocks, plates, sheets and strip, solid cylinders, incl. discs, of agglomerated cork

4701 00

mechanical wood pulp, not chemically treated

4703 19

unbleached non-coniferous chemical wood pulp, soda or sulphate (excl. dissolving grades)

4703 21

semi-bleached or bleached coniferous chemical wood pulp, soda or sulphate (excl. dissolving grades)

4703 29

semi-bleached or bleached non-coniferous chemical wood pulp, soda or sulphate (excl. dissolving grades)

4704 11

unbleached coniferous chemical wood pulp, sulphite (excl. dissolving grades)

4704 21

semi-bleached or bleached coniferous chemical wood pulp, sulphite (excl. dissolving grades)

4704 29

semi-bleached or bleached non-coniferous chemical wood pulp, sulphite (excl. dissolving grades)

4705 00

wood pulp obtained by a combination of mechanical and chemical pulping processes

4706 30

pulps of fibrous cellulosic bamboo material

4706 92

chemical pulp of fibrous cellulosic material (excl. that of bamboo, wood, cotton linters and fibres derived from recovered [waste and scrap] paper or paperboard)

4707 10

recovered "waste and scrap" paper or paperboard of unbleached kraft paper, corrugated paper or corrugated paperboard

4707 30

recovered "waste and scrap" paper or paperboard made mainly of mechanical pulp, e.g. newspapers, journals and similar printed matter

4802 20

paper and paperboard of a kind used as a base for photosensitive, heat-sensitive or electrosensitive paper and paperboard, uncoated, in rolls or in square or rectangular sheets, of any size

4802 40

wallpaper base, uncoated

4802 58

uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls or in square or rectangular sheets, of any size, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10 % by weight of the total fibre content consists of such fibres, weighing > 150 g/m2, n.e.s.

4802 61

uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls of any size, of which > 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process, n.e.s.

4804 11

unbleached kraftliner, uncoated, in rolls of a width > 36 cm

4804 19

kraftliner, uncoated, in rolls of a width > 36 cm (excl. unbleached and goods of heading 4802 and 4803 )

4804 21

unbleached sack kraft paper, uncoated, in rolls of a width > 36 cm (excl. goods of heading 4802 , 4803 or 4808 )

4804 29

sack kraft paper, uncoated, in rolls of a width > 36 cm (excl. unbleached, and goods of heading 4802 , 4803 or 4808 )

4804 31

unbleached kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2 (excl. kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 )

4804 39

kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2 (excl. unbleached, kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 )

4804 41

unbleached kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g to < 225 g/m2 (excl. kraftliner, sack kraft paper, and goods of heading 4802 , 4803 or 4808 )

4804 42

kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g to < 225 g/m2, bleached uniformly in the mass, containing > 95 % chemically processed wood fibre by weight in relation to the total fibre content (excl. kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 )

4804 49

kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g to < 225 g/m2 (excl. unbleached, bleached uniformly in the mass and containing > 95% chemically processed wood fibre by weight in relation to the total fibre content, kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 )

4804 52

kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing >= 225 g/m2, bleached uniformly in the mass, containing > 95 % chemically processed wood fibre by weight in relation to the total fibre content (excl. kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 )

4804 59

kraft paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing >= 225 g/m2 (excl. unbleached or bleached uniformly in the mass and containing > 95 % chemically prepared wood fibre by weight in relation to the total fibre content, and kraftliner, sack kraft paper and goods of heading 4802 , 4803 or 4808 )

4805 24

testliner "recycled liner board", uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2

4805 25

testliner "recycled liner board", uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g/m2

4805 40

filter paper and paperboard, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state

4805 91

paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2, n.e.s.

4805 92

paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g to < 225 g/m2, n.e.s.

4806 10

vegetable parchment, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state

4806 20

greaseproof papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state

4806 30

tracing papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state

4806 40

glassine and other glazed transparent or translucent papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. vegetable parchment, greaseproof papers and tracing papers)

4807 00

composite paper and paperboard "made by sticking flat layers of paper or paperboard together with an adhesive", not surface-coated or impregnated, whether or not internally reinforced, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state

4808 90

paper and paperboard, creped, crinkled, embossed or perforated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. sack kraft and other kraft paper, and goods of heading 4803 )

4809 20

self-copy paper, whether or not printed, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. carbon and similar copying papers)

4810 13

paper and paperboard used for writing, printing or other graphic purposes, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10 % by weight of the total fibre content consists of such fibres, coated on one or both sides with kaolin or other inorganic substances, in rolls of any size

4810 19

paper and paperboard used for writing, printing or other graphic purposes, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10 % by weight of the total fibre content consists of such fibres, coated on one or both sides with kaolin or other inorganic substances, in square or rectangular sheets with one side > 435 mm or with one side <= 435 mm and the other side > 297 mm in the unfolded state

4810 22

lightweight coated paper used for writing, printing or other graphic purposes, total weight <= 72 g/m2, coating weight <= 15 g/m2 per side, on a base of which >= 50 % by weight of the total fibre content consists of fibres obtained by a mechanical process, coated on both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size

4810 31

kraft paper and paperboard, bleached uniformly throughout the mass and containing > 95 % chemically processed wood fibres by weight in relation to the total fibre content, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size, weighing <= 150 g/m2 (excl. that for writing, printing or other graphic purposes)

4810 39

kraft paper and paperboard, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size (excl. that for writing, printing or other graphic purposes; paper and paperboard bleached uniformly in the mass and containing > 95 % chemically processed wood fibres by weight in relation to the total fibre content)

4810 92

multi-ply paper and paperboard, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size (excl. that for writing, printing or other graphic purposes, kraft paper and paperboard)

4810 99

paper and paperboard, coated on one or both sides with kaolin "china clay" or other inorganic substances, with or without a binder, and with no other coating, whether or not surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. that for writing, printing or other graphic purposes, kraft paper and paperboard, multi-ply paper and paperboard, and with no other coating)

4811 10

tarred, bituminised or asphalted paper and paperboard, in rolls or in square or rectangular sheets, of any size

4811 51

paper and paperboard, surface-coloured, surface-decorated or printed, coated, impregnated or covered with artificial resins or plastics, in rolls or in square or rectangular sheets, of any size, bleached and weighing > 150 g/m2 (excl. adhesives)

4811 59

paper and paperboard, surface-coloured, surface-decorated or printed, coated, impregnated or covered with artificial resins or plastics, in rolls or in square or rectangular sheets, of any size (excl. bleached and weighing > 150 g/m2, and adhesives)

4811 60

paper and paperboard, coated, impregnated or covered with wax, paraffin wax, stearin, oil or glycerol, in rolls or in square or rectangular sheets, of any size (excl. goods of heading 4803 , 4809 and 4818 )

4811 90

paper, paperboard, cellulose wadding and webs of soft cellulose, coated, impregnated, covered, surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. goods of heading 4803 , 4809 , 4810 and 4818 , and of subheading 4811.10 to 4811.60)

4814 90

wallpaper and similar wallcoverings of paper, and window transparencies of paper (excl. wallcoverings of paper, consisting of paper coated or covered, on the face side, with a grained, embossed, coloured or design-printed or otherwise decorated layer of plastics)

4819 20

folding cartons, boxes and cases, of non-corrugated paper or paperboard

4822 10

bobbins, spools, cops and similar supports of paper pulp, paper or paperboard, whether or not perforated or hardened, for winding textile yarn

4823 20

filter paper and paperboard, in strips or rolls of a width <= 36 cm, in rectangular or square sheets, of which no side > 36 cm in the unfolded state, or cut to shape other than rectangular or square

4823 40

rolls, sheets and dials, printed for self-recording apparatus, in rolls of a width <= 36 cm, in rectangular or square sheets of which no side > 36 cm in the unfolded state, or cut into dials

4823 70

moulded or pressed articles of paper pulp, n.e.s.

4906 00

plans and drawings for architectural, engineering, industrial, commercial, topographical or similar purposes, being originals drawn by hand; handwritten texts; photographic reproductions on sensitised paper and carbon copies of the foregoing

5105 39

fine animal hair, carded or combed (excl. wool and hair of kashmir "cashmere" goats)

5105 40

coarse animal hair, carded or combed

5106 10

carded wool yarn containing >= 85 % wool by weight (excl. that put up for retail sale)

5106 20

carded wool yarn containing predominantly, but < 85 % wool by weight (excl. that put up for retail sale)

5107 20

yarn of combed wool containing predominantly, but < 85 % wool by weight (excl. that put up for retail sale)

5112 11

woven fabrics containing >= 85 % combed wool or combed fine animal hair by weight and weighing <= 200 g/m2 (excl. fabrics for technical uses of heading 5911 )

5112 19

woven fabrics containing >= 85 % combed wool or combed fine animal hair by weight and weighing > 200 g/m2

5205 21

single cotton yarn, of combed fibres, containing >= 85 % cotton by weight and with a linear density of >= 714,29 decitex "<= mn 14" (excl. sewing thread and yarn put up for retail sale)

5205 28

single cotton yarn, of combed fibres, containing >= 85 % cotton by weight and with a linear density of < 83,33 decitex "> mn 120" (excl. sewing thread and yarn put up for retail sale)

5205 41

multiple "folded" or cabled cotton yarn, of combed fibres, containing >= 85 % cotton by weight and with a linear density of >= 714,29 decitex "<= mn 14" per single yarn (excl. sewing thread and yarn put up for retail sale)

5206 42

multiple "folded" or cabled cotton yarn containing predominantly, but < 85 % cotton by weight, of combed fibres and with a linear density of 232,56 decitex to < 714,29 decitex "> mn 14 to mn 43" per single yarn (excl. sewing thread and yarn put up for retail sale)

5209 11

plain woven fabrics of cotton, containing >= 85 % cotton by weight and weighing > 200 g/m2, unbleached

5211 19

woven fabrics of cotton, containing predominantly, but < 85 % cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, unbleached (excl. those in three-thread or four-thread twill, incl. cross twill, and plain woven fabrics)

5211 51

plain woven fabrics of cotton, containing predominantly, but < 85 % cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, printed

5211 59

woven fabrics of cotton, containing predominantly, but < 85 % cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, printed (excl. those in three-thread or four-thread twill, incl. cross twill, and plain woven fabrics)

5308 20

hemp yarn

5402 63

multiple "folded" or cabled filament yarn of polypropylene, incl. monofilament of < 67 decitex (excl. sewing thread, yarn put up for retail sale and textured yarn)

5403 33

filament yarn of cellulose acetate, incl. monofilament of < 67 decitex, single (excl. sewing thread, high-tenacity yarn and yarn put up for retail sale)

5403 42

multiple "folded" or cabled filament yarn of cellulose acetate, incl. monofilament of < 67 decitex (excl. sewing thread, high-tenacity yarn and yarn put up for retail sale)

5404 12

polypropylene monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm (excl. elastomers)

5404 19

synthetic monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm (excl. of elastomers and polypropylene)

5404 90

strip and the like, e.g. artificial straw, of synthetic textile material, with an apparent width of <= 5 mm

5407 30

woven fabrics of synthetic filament yarn, incl. monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm, consisting of layers of parallel textile yarns superimposed on each other at acute or right angles, the layers being bonded at the intersections of the yarns by an adhesive or by thermal bonding

5501 90

synthetic filament tow as specified in note 1 to chapter 55 (excl. that of acrylic, modacrylic, polyesters, polypropylene, nylon or other polyamide filament)

5502 10

artificial filament tow as specified in note 1 to chapter 55, of acetate

5503 19

staple fibres of nylon or other polyamides, not carded, combed or otherwise processed for spinning (excl. those of aramids)

5503 40

staple fibres of polypropylene, not carded, combed or otherwise processed for spinning

5504 90

artificial staple fibres, not carded, combed or otherwise processed for spinning (excl. those of viscose rayon)

5506 40

staple fibres of polypropylene, carded, combed or otherwise processed for spinning

5507 00

artificial staple fibres, carded, combed or otherwise processed for spinning

5512 21

woven fabrics containing >= 85 % acrylic or modacrylic staple fibres by weight, unbleached or bleached

5512 99

woven fabrics containing >= 85 % synthetic staple fibres by weight, dyed, made of yarn of different colours or printed (excl. those of acrylic, modacrylic or polyester staple fibres)

5516 44

woven fabrics containing predominantly, but < 85 % artificial staple fibres by weight, mixed principally or solely with cotton, printed

5516 94

woven fabrics containing predominantly, but < 85 % artificial staple fibres by weight, other than those mixed principally or solely with cotton, wool, fine animal hair or man-made filament, printed

5601 29

wadding of textile materials and articles thereof (excl. of cotton or man-made fibres; sanitary towels and tampons, napkins and napkin liners for babies and similar sanitary articles, wadding and articles thereof, impregnated or covered with medicated substances or put up for retail for medical, surgical, dental or veterinary purposes, or impregnated, coated or covered with perfumes, make-up, soaps, cleansing agents, etc.)

5601 30

textile flock and dust and mill neps

5604 90

textile yarn, strip and the like of heading 5404 and 5405 , impregnated, coated, covered or sheathed with rubber or plastics (excl. imitation catgut, thread and cord with fish-hook attachments or otherwise put up as fishing line)

5605 00

metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405 , of textile fibres, combined with metal in the form of thread, strip or powder or covered with metal (excl. yarns manufactured from a mixture of textile fibres and metal fibres, with anti-static properties; yarns reinforced with metal wire; articles with the character of trimmings)

5607 41

binder or baler twine, of polyethylene or polypropylene

5801 27

warp pile fabrics, of cotton (excl. terry towelling and similar woven terry fabrics, tufted textile fabrics and narrow woven fabrics of heading 5806 )

5803 00

gauze (excl. narrow woven fabrics of heading 5806 )

5806 40

narrow fabrics consisting of warp without weft assembled by means of an adhesive "bolducs", with a width of <= 30 cm

5901 10

textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books, the manufacture of boxes and articles of cardboard or the like

5905 00

textile wallcoverings

5908 00

textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas-mantle fabric for incandescent gas mantles, whether or not impregnated (excl. wax-covered wicks of the taper variety, fuses and detonating fuses, wicks in the form of textile yarn and glass-fibre wicks)

5910 00

transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material (excl. those of a thickness of < 3 mm and of indeterminate length or cut to length only, and those impregnated, coated, covered or laminated with rubber or made of yarn or cord impregnated or coated with rubber)

5911 10

textile fabrics, felt and felt-lined woven fabrics, coated, covered or laminated with rubber, leather or other material, of a kind used for card clothing, and similar fabrics of a kind used for other technical purposes, incl. narrow fabrics made of velvet impregnated with rubber, for covering weaving spindles "weaving beams"

5911 31

textile fabrics and felts, endless or fitted with linking devices, of a kind used in papermaking or similar machines, e.g. for paper pulp or asbestos-cement, weighing < 650 g/m2

5911 32

textile fabrics and felts, endless or fitted with linking devices, of a kind used in papermaking or similar machines, e.g. for paper pulp or asbestos-cement, weighing >= 650 g/m2

5911 40

straining cloth of a kind used in oil-presses or for similar technical purposes, incl. that of human hair

6001 99

pile fabrics, knitted or crocheted (excl. cotton or man-made fibres and "long pile" fabrics)

6003 40

knitted or crocheted fabrics of artificial fibres, of a width of <= 30 cm (excl. those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. "long pile", looped pile fabrics, labels, badges and similar articles, knitted or crocheted fabrics, impregnated, coated, covered or laminated, and sterile surgical or dental adhesion barriers of subheading 3006.10.30)

6005 36

unbleached or bleached warp knit fabrics of synthetic fibres "incl. those made on galloon knitting machines", of a width of > 30 cm (excl. those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. "long pile", looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated)

6005 44

printed warp knit fabrics of artificial fibres "incl. those made on galloon knitting machines", of a width of > 30 cm (excl. those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. "long pile", looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated)

6006 10

fabrics, knitted or crocheted, of a width of > 30 cm, of wool or fine animal hair (excl. warp knit fabrics "incl. those made on galloon knitting machines", those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. "long pile", looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated)

6309 00

worn clothing and clothing accessories, blankets and travelling rugs, household linen and articles for interior furnishing, of all types of textile materials, incl. all types of footwear and headgear, showing signs of appreciable wear and presented in bulk or in bales, sacks or similar packings (excl. carpets, other floor coverings and tapestries)

6802 92

calcareous stone, in any form (excl. marble, travertine and alabaster, tiles, cubes and similar articles of subheading 6802.10, imitation jewellery, clocks, lamps and lighting fittings and parts thereof, original sculptures and statuary, setts, curbstones and flagstones)

6804 23

millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of natural stone (excl. of agglomerated natural abrasives or ceramics, perfumed pumice stones, hand sharpening or polishing stones, and grinding wheels etc. specifically for dental drill engines)

6806 10

slag-wool, rock-wool and similar mineral wools, incl. intermixtures thereof, in bulk, sheets or rolls

6806 90

mixtures and articles of heat-insulating, sound-insulating or sound absorbing mineral materials (excl. slag-wool, rock-wool and similar mineral wools, exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials, articles of light concrete, asbestos-cement, cellulose fibre-cement or the like, mixtures and other articles of or based on asbestos, and ceramic products)

6807 10

articles of asphalt or of similar materials, e.g. petroleum bitumen or coal tar pitch, in rolls

6807 90

articles of asphalt or of similar materials, e.g. petroleum bitumen or coal tar pitch (excl. in rolls)

6809 19

boards, sheets, panels, tiles and similar articles, of plaster or compositions based on plaster (excl. ornamented, faced or reinforced with paper or paperboard only, and with plaster agglomerated articles for heat-insulation, sound-insulation or sound absorption)

6810 91

prefabricated structural components for building or civil engineering of cement, concrete or artificial stone, whether or not reinforced

6811 81

corrugated sheets of cellulose fibre-cement or the like, not containing asbestos

6811 82

sheets, panels, paving, tiles and similar articles, of cellulose fibre-cement or the like, not containing asbestos (excl. corrugated sheets)

6811 89

articles of cellulose fibre-cement or the like, not containing asbestos (excl. corrugated and other sheets, panels, tiles and similar articles)

6813 89

friction material and articles thereof, e.g. sheets, rolls, strips, segments, discs, washers and pads, for clutches and the like, with a basis of mineral substances or cellulose, whether or not combined with textile or other materials (excl. containing asbestos, and brake linings and pads)

6814 90

worked mica and articles of mica (excl. electrical insulators, insulating fittings, resistors and capacitors, protective goggles of mica and their glasses, mica in the form of christmas tree decorations, and plates, sheets and strips of agglomerated or reconstituted mica, whether or not on supports)

6901 00

bricks, blocks, tiles and other ceramic goods of siliceous fossil meals, e.g. kieselguhr, tripolite or diatomite, or of similar siliceous earths

6904 10

building bricks (excl. those of siliceous fossil meals or similar siliceous earths, and refractory bricks of heading 6902 )

6905 10

roofing tiles

6905 90

ceramic chimney pots, cowls, chimney liners, architectural ornaments and other ceramic constructional goods (excl. of siliceous fossil meals or similar siliceous earths, refractory ceramic constructional components, pipes and other components for drainage and similar purposes, and roofing tiles)

6906 00

ceramic pipes, conduits, guttering and pipe fittings (excl. of siliceous fossil meals or similar siliceous earths, refractory ceramic goods, chimney liners, pipes specifically manufactured for laboratories, insulating tubing and fittings and other piping for electrotechnical purposes)

6907 22

ceramic flags and paving, hearth or wall tiles, of a water absorption coefficient by weight > 0,5 % but <= 10 % (excl. mosaic cubes and finishing ceramics)

6907 40

finishing ceramics

6909 90

ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods (excl. general-purpose storage vessels for laboratories, containers for shops and household articles)

7002 20

rods of glass, unworked

7002 31

tubes of fused quartz or other fused silica, unworked

7002 32

tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°C to 300°C, unworked (excl. tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°C to 300°C)

7002 39

tubes of glass, unworked (excl. tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°C to 300°C or of fused quartz or other fused silica)

7003 30

profiles of glass, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked

7004 20

sheets of glass, drawn or blown, coloured throughout the mass "body tinted" opacified, flashed or having an absorbent, reflecting or non-reflecting layer, but not otherwise worked

7005 10

float glass and surface ground or polished glass, in sheets, having an absorbent, reflecting or non-reflecting layer, but not otherwise worked (excl. wired glass)

7005 30

float glass and surface ground and polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, wired, but not otherwise worked

7007 11

toughened "tempered" safety glass, of size and shape suitable for incorporation in motor vehicles, aircraft, spacecraft, vessels and other vehicles

7007 29

laminated safety glass (excl. glass of size and shape suitable for incorporation in motor vehicles, aircraft, spacecraft, vessels or other vehicles, multiple-walled insulating units)

7011 10

glass envelopes, incl. bulbs and tubes, open, and glass parts thereof, without fittings, for electric lighting

7202 92

ferro-vanadium

7207 12

semi-finished products of iron or non-alloy steel containing, by weight, < 0,25 % of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness

7208 25

flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm, pickled, without patterns in relief

7208 90

flat-rolled products of iron or steel, of a width >= 600 mm, hot-rolled and further worked, but not clad, plated or coated

7209 25

flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 3 mm

7209 28

flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of < 0,5 mm

7210 90

flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated (excl. tinned, plated or coated with lead, zinc, chromium oxides, chromium and chromium oxides, or aluminium, painted, varnished or coated with plastics)

7211 13

flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats"

7211 14

flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")

7211 29

flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25 % of carbon

7212 10

flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned

7212 60

flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad

7213 20

bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process)

7213 99

bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel (excl. products of circular cross-section measuring < 14 mm in diameter, bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process)

7215 50

bars and rods, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. of free-cutting steel)

7216 10

u, i or h sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm

7216 22

t sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm

7216 33

h sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm

7216 69

angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. profiled sheet)

7218 91

semi-finished products of stainless steel, of rectangular "other than square" cross-section

7219 24

flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm

7222 30

other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked

7224 10

steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting)

7225 19

flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, non-grain-oriented

7225 30

flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel)

7225 99

flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel)

7226 91

flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel)

7228 30

bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)

7228 60

bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)

7228 70

angles, shapes and sections of alloy steel other than stainless, n.e.s.

7228 80

hollow drill bars and rods, of alloy or non-alloy steel

7229 90

wire of alloy steel other than stainless, in coils (excl. bars and rods and wire of silico-manganese steel)

7301 20

angles, shapes and sections, of iron or steel, welded

7304 24

casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel

7305 39

tubes and pipes having circular cross-sections and an external diameter of > 406,4 mm, of iron or steel, welded (excl. products longitudinally welded or of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas)

7306 50

Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)

7307 22

Threaded elbows, bends and sleeves

7309 00

Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment

7314 12

Endless bands of stainless steel wire, for machinery

7318 24

Cotters and cotter pins, of iron or steel

7320 20

Helical springs, of iron or steel (excl. flat spiral springs, clock and watch springs, springs for sticks and handles of umbrellas or parasols, and shock absorbers of section 17)

7322 90

Air heaters and hot-air distributors, incl. distributors which can also distribute fresh or conditioned air, non-electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel

7324 29

baths of steel sheet

7407 10

bars, rods and profiles, of refined copper

7408 11

wire of refined copper, with a maximum cross-sectional dimension of > 6 mm

7408 19

wire of refined copper, with a maximum cross-sectional dimension of <= 6 mm

7409 11

plates, sheets and strip, of refined copper, in coils, of a thickness of > 0,15 mm (excl. expanded sheet and strip and electrically insulated strip)

7409 19

plates, sheets and strip, of refined copper, not in coils, of a thickness of > 0,15 mm (excl. expanded sheet and strip and electrically insulated strip)

7409 40

plates, sheets and strip, of copper-nickel base alloys "cupro-nickel" or copper-nickel-zinc base alloys "nickel silver", of a thickness of > 0,15 mm (excl. expanded sheet and strip and electrically insulated strip)

7411 29

tubes and pipes of copper alloys (excl. copper-zinc base alloys "brass", copper-nickel base alloys "cupro-nickel" and copper-nickel-zinc base alloys "nickel silver")

7415 21

washers, "incl. spring washers and spring lock washers", of copper

7505 11

bars, rods, profiles and wire, of non-alloy nickel, n.e.s. (excl. electrically insulated products)

7505 21

wire of non-alloy nickel (excl. electrically insulated products)

7506 10

plates, sheets, strip and foil, of non-alloy nickel (excl. expanded plates, sheets or strip)

7507 11

tubes and pipes of non-alloy nickel

7508 90

articles of nickel

7605 19

Wire of non-alloy aluminium, with a maximum cross-sectional dimension of <= 7 mm (other than stranded wires, cables, ropes and other articles of heading 7614 , electrically insulated wires, strings for musical instruments)

7605 29

Wire, of aluminium alloys, having a maximum cross-sectional dimension of <= 7 mm (other than stranded wires, cables, ropes and other articles of heading 7614 , electrically insulated wires, strings for musical instruments)

7606 92

Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm (other than square or rectangular)

7607 20

Aluminium foil, backed, of a thickness (excl. any backing) of <= 0,2 mm (excl. stamping foils of heading 3212 , and foil made up as christmas tree decorating material)

7611 00

Reservoirs, tanks, vats and similar containers, of aluminium, for any material (other than compressed or liquefied gas), of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport)

7612 90

casks, drums, cans, boxes and similar containers, incl. rigid tubular containers, of aluminium, for any material (other than compressed or liquefied gas), of a capacity of <= 300 l, n.e.s.

7613 00

Aluminium containers for compressed or liquefied gas

7616 10

Nails, tacks, staples (other than those of heading 8305 ), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles............

7804 11

Lead plates, sheets, strip and foil; lead powders and flakes - Plates, sheets, strip and foil - Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0,2 mm

7804 19

Lead plates, sheets, strip and foil; lead powders and flakes - Plates, sheets, strip and foil - Other

7905 00

zinc plates, sheets, strip and foil

8001 20

unwrought tin alloys

8003 00

Tin bars, rods, profiles and wire

8007 00

Articles of tin

8101 10

tungsten powders

8102 97

Molybdenum waste and scrap (excl. ash and residues containing molybdenum)

8105 90

Articles of cobalt

8109 31

Zirconium waste and scrap - Containing less than 1|part hafnium to|500|parts zirconium by weight

8109 39

Zirconium waste and scrap - Other

8109 91

Articles of zirconium - Containing less than 1|part hafnium to|500|part zirconium by weight

8109 99

Articles of zirconium - Other

8202 20

Bandsaw blades of base metal

8207 60

Tools for boring or broaching

8208 10

Knives and cutting blades, for machines or for mechanical appliances - for metalworking

8208 20

Knives and cutting blades, for machines or for mechanical appliances - for wood-working

8208 30

Knives and cutting blades, for machines or for mechanical appliances - used by the food industry

8208 90

Knives and cutting blades, for machines or for mechanical appliances - other

8301 20

locks used for motor vehicles, of base metal

8301 70

Keys presented separately

8302 30

Other mountings, fittings and similar articles suitable for motor vehicles

8307 10

flexible tubing of iron or steel, with or without fittings

8309 90

Stoppers, caps and lids, incl. screw caps and pouring stoppers, capsules for bottles, threaded bungs, bung covers, seals and other packing accessories of base metal (excl. crow corks)

8402 12

Watertube boilers with a steam production not exceeding 45 tonnes per hour

8402 19

Other vapour generating boilers, including hybrid boilers

8402 20

Superheated water boilers

8402 90

Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); superheated water boilers - Parts

8404 10

Auxiliary plant for use with boilers of heading 8402 or 8403 , e.g. economizers, superheaters, soot removers and gas recoverers

8404 20

Condensers for steam or other vapour power units

8404 90

Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers - Parts

8405 90

parts of producer gas or water gas generators and acetylene gas generators or similar water process gas generators, n.e.s.

8406 90

Steam turbines and other vapour turbines - Parts

8412 10

Reaction engines other than turbojets

8412 21

Engines and motors - linear acting (cylinders)

8412 29

Hydraulic power engines and motors - Other

8412 39

Pneumatic power engines and motors - Other

8414 90

Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters - Parts

8415 83

Other air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated - not incorporating a refrigerating unit

8416 10

furnace burners for liquid fuel

8416 20

Furnace burners for pulverised solid fuel or gas, incl. combination burners

8416 30

Mechanical stokers, incl. their mechanical grates, mechanical ash dischargers and similar appliances (excl. burners)

8416 90

Parts of furnace burners such as mechanical stokers, incl. their mechanical grates, mechanical ash dischargers and similar appliances

8417 20

Bakery ovens, incl. biscuit ovens, non-electric

8419 19

instantaneous or storage water heaters, non-electric (excl. instantaneous gas water heaters and boilers or water heaters for central heating)

8420 99

Parts of calendering or other rolling machines, other than for metals or glass, and cylinders therefor - Other

8421 19

Centrifuges, including centrifugal dryers - other

8421 91

Parts of centrifuges, incl. centrifugal dryers

8424 89 40

Mechanical appliances for projecting, dispersing, or spraying of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies

8424 90 20

Parts of mechanical appliances of subheading 8424 89 40

8425 11

Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles powered by electric motor

8426 12

Mobile lifting frames on tyres and straddle carriers

8426 99

Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane - Other

8428 20

Pneumatic elevators and conveyors

8428 32

Other continuous-action elevators and conveyors, for goods or materials - Other, bucket type

8428 33

Other continuous-action elevators and conveyors, for goods or materials - Other, belt type

8428 90

Other machinery

8429 19

Bulldozers and angledozers - Other

8429 59

Mechanical shovels, excavators and shovel loaders - Other

8430 10

Piledrivers and pile extractors

8430 39

Coal or rock cutters and tunnelling machinery - Other

8439 10

Machinery for making pulp of fibrous cellulosic material

8439 30

Machinery for finishing paper or paperboard

8440 90

Bookbinding machinery, including book-sewing machines - Parts

8441 30

Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by moulding

8442 40

Parts of the foregoing machinery, apparatus or equipment

8443 13

Other offset printing machinery

8443 15

Letterpress printing machinery, other than reel fed, excluding flexographic printing

8443 16

Flexographic printing machinery

8443 17

Gravure printing machinery

8443 91

Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442

8444 00

Machines for extruding, drawing, texturing or cutting man-made textile materials

8448 11

Dobbies and jacquards; card-reducing, copying, punching or assembling machines for use therewith

8448 19

Auxiliary machinery for machines of heading 8444 , 8445 , 8446 or 8447 - Other

8448 33

Spindles, spindle flyers, spinning rings and ring travellers

8448 42

Reeds for looms, healds and heald-frames

8448 49

Parts and accessories of weaving machines (looms) or of their auxiliary machinery - Other

8448 51

Sinkers, needles and other articles used in forming stitches

8451 10

Dry-cleaning machines

8451 29

Drying machines - Other

8451 30

Ironing machines and presses (including fusing presses)

8451 90

Machinery (other than machines of heading 8450 ) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made-up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics - Parts

8453 10

Machinery for preparing, tanning or working hides, skins or leather

8453 80

Other machinery

8453 90

Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines - Parts

8454 10

Converters

8459 10

Way-type unit head machines

8459 70

Other threading or tapping machines

8461 20

Shaping or slotting machines, for working metals, metal carbides or cermets

8461 30

Broaching machines, for working metals, metal carbides or cermets

8461 40

Gear-cutting, gear-grinding or gear-finishing machines

8461 90

Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included - Other

8465 20

Machining centres

8465 93

Grinding, sanding or polishing machines

8465 94

Bending or assembling machines

8466 10

Tool holders and self-opening dieheads

8466 92

Other parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465 , including work or tool holders, self- opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand - For machines of heading 8464

8472 10

Duplicating machines

8472 30

Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or cancelling postage stamps

8473 21

Parts and accessories of the electronic calculating machines of subheading 8470 10 , 8470 21 or 8470 29

8474 10

Sorting, screening, separating or washing machines

8474 39

Mixing or kneading machines - Other

8474 80

Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand - Other machinery

8475 21

Machines for making optical fibres and preforms thereof

8475 29

Machines for manufacturing or hot working glass or glassware - Other

8475 90

Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware - Parts

8477 40

Vacuum-moulding machines and other thermoforming machines

8477 51

For moulding or retreading pneumatic tyres or for moulding or otherwise forming inner tubes

8479 10

Machinery for public works, building or the like

8479 30

Presses for the manufacture of particle board or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork

8479 50

Industrial robots, not elsewhere specified or included

8479 90

Machines and mechanical appliances having individual functions, not specified or included elsewhere in Chapter 84 - Parts

8480 20

Mould bases

8480 30

Moulding patterns

8480 60

Moulds for mineral materials

8481 10

Pressure-reducing valves

8481 20

Valves for oleohydraulic or pneumatic transmissions

8481 40

Safety or relief valves

8482 20

Tapered roller bearings, including cone and tapered roller assemblies

8482 91

Balls, needles and rollers

8482 99

Other parts

8484 10

Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal

8484 20

Mechanical seals

8484 90

Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals - Other

8501 33

Other DC motors; DC generators, other than photovoltaic generators - of an output exceeding 75 kW but not exceeding 375 kW

8501 62

AC generators (alternators), other than photovoltaic generators of an output exceeding 75 kVA but not exceeding 375 kVA

8501 63

AC generators (alternators), other than photovoltaic generators of an output exceeding 375 kVA but not exceeding 750 kVA

8501 64

AC generators (alternators), other than photovoltaic generators of an output exceeding 750 kVA

8502 31

Generating sets, wind-powered

8502 39

Other generating sets - Other

8502 40

Electric rotary converters

8504 33

Transformers having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA

8504 34

Transformers having a power handling capacity exceeding 500 kVA

8505 20

Electromagnetic couplings, clutches and brakes

8506 90

Primary cells and primary batteries - Parts

8507 30

Electric accumulators, including separators therefor, whether or not rectangular (including square) - Nickel-cadmium

8514 31

Electron beam furnaces

8525 50

Transmission apparatus

8530 90

Electrical signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields (other than those of heading 8608 ) - Parts

8532 10

Fixed capacitors designed for use in 50/60 hz circuits and having a reactive power-handling capacity of >= 0,5 kvar "power capacitors"

8533 29

Other fixed resistors - Other

8535 30

Isolating switches and make-and-break switches

8535 90

Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, fuses, lightning arresters, voltage limiters, surge suppressors, plugs and other connectors, junction boxes), for a voltage exceeding 1 000 V - Other

8539 41

Arc lamps

8540 20

Television camera tubes; image converters and intensifiers; other photocathode tubes

8540 60

Other cathode ray tubes

8540 79

Microwave tubes (for example, magnetrons, klystrons, travelling-wave tubes, carcinotrons), excluding grid-controlled tubes - Other

8540 81

Receiver or amplifier valves and tubes

8540 89

Other valves and tubes - Other

8540 91

Parts of cathode ray tubes

8540 99

Other parts

8543 10

Particle accelerators

8547 90

Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546 ; electrical conduit tubing and joints therefor, of base metal lined with insulating material - Other

8602 90

Rail locomotives powered by electric accumulators

8604 00

Railway or tramway maintenance or service vehicles, whether or not self-propelled (for example, workshops, cranes, ballast tampers, trackliners, testing coaches and track inspection vehicles)

8606 92

Other railway or tramway goods vans and wagons, not self-propelled - Open, with non-removable sides of a height exceeding 60 cm

8701 21

Road tractors for semi-trailers - With only compression-ignition internal combustion piston engine (diesel or semi-diesel)

8701 22

Road tractors for semi-trailers - With both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion

8701 23

Road tractors for semi-trailers - With both spark-ignition internal combustion piston engine and electric motor as motors for propulsion

8701 24

Road tractors for semi-trailers - With only electric motor for propulsion

8701 30

Track-laying tractors (excl. pedestrian-controlled)

8704 10

Dumpers designed for off-highway use

8704 22

Other motor vehicles for the transport of goods - of a gross vehicle weight exceeding 5 tonnes but not exceeding 20 tonnes:

8704 32

Other motor vehicles for the transport of goods - of a gross vehicle weight exceeding 5 tonnes

8705 20

Mobile drilling derricks

8705 30

Fire fighting vehicles

8705 90

Special purpose motor vehicles, other than those principally designed for the transport of persons or goods (for example, breakdown lorries, crane lorries, fire fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile workshops, mobile radiological units) - Other

8709 90

Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles - Parts

8716 20

Self-loading or self-unloading trailers and semi-trailers for agricultural purposes

8716 39

Other trailers and semi-trailers for the transport of goods - Other

9010 10

Apparatus and equipment for automatically developing photographic (including cinematographic) film or paper in rolls or for automatically exposing developed film to rolls of photographic paper

9015 40

Photogrammetrical surveying instruments and appliances

9015 80

Other instruments and appliances

9015 90

Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders - Parts and acessories

9029 10

Revolution counters, production counters, taximeters, milometers, pedometers and the like

9031 20

Test benches

9032 81

Other automatic regulating or controlling instruments and apparatus - Hydraulic or pneumatic - Other

9401 10

Seats for aircraft

9401 20

Seats for motor vehicles

9403 30

Wooden furniture of a kind used in offices

9406 10

Prefabricated buildings of wood

9406 90

Prefabricated buildings, whether or not complete or already assembled - Other

9606 30

Button moulds and other parts of buttons; button blanks

9608 91

Pen nibs and nib points

9612 20

Of man-made fibres, measuring less than 30 mm in width, permanently put in plastic or metal cartridges of a kind used in automatic typewriters, automatic data- processing equipment and other machines


ANNEX VII

In Annex XXIV to Regulation (EU) No 833/2014 the title is replaced by:

‘List of goods as referred to in Article 3ea(5)(a)’.


ANNEX VIII

The following Annex is added:

‘ANNEX XXVI

LIST OF GOODS AS REFERRED TO IN ARTICLE 3o(1) and (2)

 

CN code

Name of the good

 

7108

Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form

 

7112 91

Waste and scrap of gold, including metal clad with gold but excluding sweepings containing other precious metals

Ex

7118 90

Gold coins


ANNEX IX

The following Annex is added:

‘ANNEX XXVII

LIST OF GOODS AS REFERRED TO IN ARTICLE 3o(3)

 

CN code

Name of the good

Ex

7113

Articles of jewellery and parts thereof, of gold or containing gold, or of metal clad with gold

Ex

7114

Articles of goldsmiths’ or silversmiths’ wares and parts thereof, of gold, containing gold, or of metal clad with gold