(1)

In accordance with Article 5(1) of Council Directive 93/42/EEC (2), Member States are to presume compliance with the essential requirements referred to in Article 3 of that Directive in respect of medical devices which are in conformity with the relevant national standards adopted pursuant to the harmonised standards the references of which have been published in the Official Journal of the European Union.

(2)

By letters BC/CEN/CENELEC/09/89 of 19 December 1991, M/023 - BC/CEN/03/023/93-08 of 5 August 1993, M/295 of 9 September 1999, M/320 of 13 June 2002 and M/432 of 24 November 2008, the Commission made requests to the European Committee for Standardisation (CEN) and the European Committee for Electrotechnical Standardisation (Cenelec) for the drafting of new harmonised standards and the revision of existing harmonised standards in support of Directive 93/42/EEC.

(3)

On the basis of request M/023 - BC/CEN/03/023/93-08, CEN revised the harmonised standards EN 1789:2007+A1:2010, EN ISO 10993-16:2010, EN ISO 11607-1:2009, EN ISO 11607-2:2006, EN ISO 11737-2:2009, EN 13718-1:2008, EN 13718-2:2015, EN ISO 22442-1:2007 and EN ISO 22442-2:2007, the references of which have been published by Commission Implementing Decision (EU) 2020/437 (3). That revision resulted in the adoption of the harmonised standards EN 1789:2020 on medical vehicles and their equipment, EN ISO 10993-16:2017 on biological evaluation of medical devices, EN ISO 11607-1:2020 and EN ISO 11607-2:2020 on packaging for terminally sterilised medical devices, EN ISO 11737-2:2020 on sterilisation of health care products, EN 13718-1:2014+A1:2020 and EN 13718-2:2015+A1:2020 on medical vehicles and their equipment and finally EN ISO 22442-1:2020 and EN ISO 22442-2:2020 on medical devices utilising animal tissues and their derivatives.

(4)

On the basis of request BC/CEN/CENELEC/09/89, CEN revised the harmonised standard EN ISO 10993-18:2009, the reference of which has been published by Implementing Decision (EU) 2020/437. That revision resulted in the adoption of the harmonised standard EN ISO 10993-18:2020 on biological evaluation of medical devices.

(5)

On the basis of request M/295, CEN and Cenelec revised the harmonised standards EN ISO 14155:2011 as corrected by EN ISO 14155:2011/AC:2011, and EN 60601-2-4:2003, the references of which have been published by Implementing Decision (EU) 2020/437. That revision resulted in the adoption of the harmonised standards EN ISO 14155:2020 on clinical investigation of medical devices for human subjects and EN 60601-2-4:2011 on medical electrical equipment.

(6)

On the basis of requests M/320 and M/023 - BC/CEN/03/023/93-08, CEN revised the harmonised standard EN ISO 14607:2009, the reference of which has been published by Implementing Decision (EU) 2020/437. That revision resulted in the adoption of the harmonised standard EN ISO 14607:2018 on non-active surgical implants.

(7)

On the basis of requests M/432 and M/023 - BC/CEN/03/023/93-08, Cenelec revised the harmonised standard EN 60118-13:2005, the reference of which has been published by Implementing Decision (EU) 2020/437. That revision resulted in the adoption of the harmonised standard EN IEC 60118-13:2020 on electroacoustics.

(8)

On the basis of request M/023 - BC/CEN/03/023/93-08, CEN and Cenelec drafted the harmonised standard EN ISO 5361:2016 on anaesthetic and respiratory equipment and the harmonised standards EN IEC 60601-2-83:2020 and EN ISO 80601-2-55:2018 on medical electrical equipment.

(9)

On the basis of requests M/432 and M/023 - BC/CEN/03/023/93-08, Cenelec drafted the harmonised standard EN IEC 60601-2-66:2020 on medical electrical equipment.

(10)

The Commission together with CEN and Cenelec has assessed whether the harmonised standards drafted and revised by CEN and Cenelec comply with the relevant requests.

(11)

The harmonised standards EN 1789:2020, EN ISO 5361:2016, EN ISO 10993-16:2017, EN ISO 10993-18:2020, EN ISO 11607-1:2020, EN ISO 11607-2:2020, EN ISO 11737-2:2020, EN 13718-1:2014+A1:2020, EN 13718-2:2015+A1:2020, EN ISO 14155:2020, EN ISO 14607:2018, EN ISO 22442-1:2020, EN ISO 22442-2:2020, EN IEC 60118-13:2020, EN 60601-2-4:2011, EN IEC 60601-2-66:2020, EN IEC 60601-2-83:2020 and EN ISO 80601-2-55:2018 satisfy the requirements which they aim to cover and which are set out in Directive 93/42/EEC. It is therefore appropriate to publish the references of those standards in the Official Journal of the European Union.

(12)

It is necessary to replace the references of harmonised standards EN 1789:2007+A1:2010, EN ISO 10993-16:2010, EN ISO 10993-18:2009, EN ISO 11607-1:2009, EN ISO 11607-2:2006, EN ISO 11737-2:2009, EN 13718-1:2008, EN 13718-2:2015, EN ISO 14155:2011 as corrected by EN ISO 14155:2011/AC:2011, EN ISO 14607:2009, EN ISO 22442-1:2007, EN ISO 22442-2:2007, EN 60118-13:2005 and EN 60601-2-4:2003, published by Implementing Decision (EU) 2020/437, as those standards have been revised.

(13)

Annex I to Implementing Decision (EU) 2020/437 lists the references of harmonised standards drafted in support of Directive 93/42/EEC. In order to ensure that the references of harmonised standards drafted in support of Directive 93/42/EEC are listed in one act, the references of standards EN ISO 5361:2016, EN IEC 60601-2-66:2020, EN IEC 60601-2-83:2020 and EN ISO 80601-2-55:2018 should be included in that Implementing Decision.

(14)

Implementing Decision (EU) 2020/437 should therefore be amended accordingly.

(15)

Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication,