(1)

In accordance with Article 12 of Directive 2014/68/EU of the European Parliament and of the Council (2), pressure equipment or assemblies referred to in Article 4(1) and (2) of that Directive which are in conformity with harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union, are to be presumed to be in conformity with the essential safety requirements covered by those standards or parts thereof referred to in Annex I to that Directive.

(2)

By letter M/071 of 1 August 1994 the Commission made a request to the European Committee for Standardisation (CEN) for drawing up, in relation to the pressure equipment, the product related standards and the standards of a horizontal nature in support of Directive 97/23/EC of the European Parliament and of the Council (3). That Directive was replaced by Directive 2014/68/EU without changing the essential safety requirements referred to in Annex I to Directive 97/23/EC.

(3)

On the basis of the request M/071 and in order to reflect the state of the art, CEN revised and amended some of the existing harmonised standards. Specifically, CEN revised harmonised standards EN ISO 4126-3:2006, EN 12542:2010 and EN 13175:2014 which resulted in adoption of harmonised standards EN ISO 4126-3:2020 on safety devices, EN 12542:2020 and EN 13175:2019+A1:2020 on LPG equipment and accessories; harmonised standard EN 12735-1:2016 which resulted in adoption of harmonised standard EN 12735-1:2020 on copper and copper alloys; and harmonised standard EN 12953-5:2002 which resulted in adoption of harmonised standard EN 12953-5:2020 on shell boilers. CEN also revised harmonised standards EN 14276-1:2006+A1:2011 and EN 14276-2:2007+A1:2011 which resulted in adoption of harmonised standards EN 14276-1:2020 and EN 14276-2:2020 on pressure equipment for refrigerating systems and heat pumps as well as harmonised standard EN ISO 15620:2000 which resulted in adoption of harmonised standard EN ISO 15620:2019 on welding.

(4)

Additionally, CEN revised and amended a series of harmonised standards on industrial valves. Namely, CEN amended harmonised standards EN ISO 16135:2006, EN ISO 16136:2006, EN ISO 16137:2006, EN ISO 16138:2006, EN ISO 16139:2006 and EN ISO 21787:2006. CEN also revised the harmonised standard EN 16767:2016 which resulted in adoption of harmonised standard EN 16767:2020 on industrial valves.

(5)

CEN also amended harmonised standards EN 13480-2:2017 and EN 13480-3:2017 on metallic industrial piping.

(6)

The Commission together with CEN has assessed whether those standards on the pressure equipment as amended or revised by CEN comply with the request M/071.

(7)

The standards on the pressure equipment as amended or revised by CEN satisfy the requirements which they aim to cover and which are referred to in Annex I to Directive 2014/68/EU. It is therefore appropriate to publish the references of those standards in the Official Journal of the European Union.

(8)

References of amended or revised versions of standards EN 12542:2010, EN 12735-1:2016, EN 12953-5:2002, EN 13175:2014, EN 13480-2:2017, EN 13480-3:2017, EN 14276-1:2006+A1:2011, EN 14276-2:2007+A1:2011, EN 16767:2016, EN ISO 15620:2000, EN ISO 16135:2006, EN ISO 16136:2006, EN ISO 16137:2006, EN ISO 16138:2006, EN ISO 16139:2006, EN ISO 21787:2006 and EN ISO 4126-3:2006 are to be published. It is therefore necessary to withdraw from the Official Journal of the European Union (4) references of the standards EN 12542:2010, EN 12735-1:2016, EN 12953-5:2002, EN 13175:2014, EN 13480-3:2017, EN 14276-1:2006+A1:2011, EN 14276-2:2007+A1:2011, EN 16767:2016, EN ISO 15620:2000, EN ISO 16135:2006, EN ISO 16136:2006, EN ISO 16137:2006, EN ISO 16138:2006, EN ISO 16139:2006, EN ISO 21787:2006 and EN ISO 4126-3:2006.

(9)

In order to give manufacturers sufficient time to adapt their products to the amended or revised versions of harmonised standards for industrial valves, welding procedures, equipment for refrigerating systems and heat pumps, shell boilers, metallic industrial piping, copper and copper alloys, LPG equipment and accessories and safety devices for protection against excessive pressure, it is necessary to defer the withdrawal of the references of those standards.

(10)

Annex I to Commission Implementing Decision (EU) 2019/1616 (5) lists the references of harmonised standards drafted in support of Directive 2014/68/EU. The references of harmonised standards EN ISO 4126-3:2020, EN 12542:2020, EN 12735-1:2020, EN 12953-5:2020, EN 13175:2019+A1:2020, EN 13480-3:2017, EN 13480-3:2017/A2:2020, EN 13480-3:2017/A3:2020, EN 14276-1:2020, EN 14276-2:2020, EN ISO 15620:2019, EN ISO 16135:2006, EN ISO 16135:2006/A1:2019, EN ISO 16136:2006, EN ISO 16136:2006/A1:2019, EN ISO 16137:2006, EN ISO 16137:2006/A1:2019, EN ISO 16138:2006, EN ISO 16138:2006/A1:2019, EN ISO 16139:2006, EN ISO 16139:2006/A1:2019, EN 16767:2020, EN ISO 21787:2006 and EN ISO 21787:2006/A1:2019 should be included in that Annex.

(11)

Annex II to Implementing Decision (EU) 2019/1616 lists the references of harmonised standards drafted in support of Directive 2014/68/EU that are withdrawn from the Official Journal of the European Union. The references of harmonised standards EN 12542:2010, EN 12735-1:2016, EN 12953-5:2002, EN 13175:2014, EN 13480-3:2017, EN 14276-1:2006+A1:2011, EN 14276-2:2007+A1:2011, EN 16767:2016, EN ISO 15620:2000, EN ISO 16135:2006, EN ISO 16136:2006, EN ISO 16137:2006, EN ISO 16138:2006, EN ISO 16139:2006, EN ISO 21787:2006 and EN ISO 4126-3:2006 should be included in that Annex.

(12)

The reference of harmonised standard EN 13480-2:2017 and the references of its amendments EN 13480- 2:2017/A1:2018, EN 13480-2:2017/A2:2018 and EN 13480-2:2017/A3:2018 are included in Annex I to Implementing Decision (EU) 2019/1616. Further amendment has been made to standard EN 13480-2:2017. It is appropriate to replace the relevant entry in that Annex, adding the reference of amendment EN 13480-2:2017/A7:2020.

(13)

Implementing Decision (EU) 2019/1616 should therefore be amended accordingly.

(14)

Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication,