28.12.2013   

EN

Official Journal of the European Union

L 354/201

COUNCIL REGULATION (EU) No 1387/2013

of 17 December 2013

suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)

The Union production of the agricultural and industrial products set out in Annex I is currently inadequate or non-existent, and thus the needs of user industries in the Union cannot be met.

(2)

It is therefore in the interests of the Union to suspend partially or totally the autonomous Common Customs Tariff duties for those products.

(3)

Council Regulation (EU) No 1344/2011 (1) has been amended many times. In addition, following its amendment by Council Regulation (EU) No 1220/2012 (2), fishery products were removed from the scope of Regulation (EU) No 1344/2011. In the interest of transparency, Regulation (EU) No 1344/2011 should therefore be replaced in its entirety.

(4)

Regulations suspending the autonomous Common Customs Tariff duties on certain industrial and agricultural products have renewed previous measures to a great extent. Therefore, in the interests of rationalising the implementation of the measures concerned, it is appropriate not to limit the period of validity of this Regulation, as its scope can be adapted and products can be added to or removed from Annex I to this Regulation by means of a Council Regulation.

(5)

In view of their temporary nature, the suspensions listed in Annex I to this Regulation should be reviewed systematically, and at the latest five years after their date of application or renewal. Moreover, it might be necessary at any time to close certain suspensions, following a proposal of the Commission on the basis of a review carried out on its own initiative or at the request of one or more Member States if it is no longer in the Union's interest to maintain the suspensions or due to technical product developments, changed circumstances or economic trends on the market.

(6)

Statistics for certain products listed in Annex I to this Regulation are frequently expressed in pieces, square meters or measurement units other than weight. However, there are no such supplementary units in the Combined Nomenclature laid down in Annex I to Council Regulation (EEC) No 2658/87 (3). It is therefore necessary to provide that not only the weight in kilograms or tonnes, but also the relevant supplementary units for the imports of the products concerned, are entered in the declaration for release for free circulation.

(7)

Since the suspensions laid down in this Regulation must take effect on 1 January 2014, this Regulation should enter into force immediately upon its publication in the Official Journal of the European Union and should apply from 1 January 2014.

(8)

In accordance with the principle of proportionality, it is necessary and appropriate for the achievement of the basic objectives of improving the competitive capacity of the Union industry, thereby enabling that industry to maintain or create employment and modernise its structures, to lay down rules on the suspension of the Common Customs Tariff duties for the products set out in Annex I. In accordance with Article 5(4) of the Treaty on European Union, this Regulation does not go beyond what is necessary to achieve the objectives pursued,

HAS ADOPTED THIS REGULATION:

Article 1

The autonomous Common Customs Tariff duties for the agricultural and industrial products listed in Annex I are hereby suspended.

Article 2

1.   The Commission may at any time review the suspensions for the products listed in Annex I in the following cases:

(a)

at its own initiative;

(b)

at the request of Member States.

2.   The Commission shall review the suspensions in the year set out in Annex I.

Article 3

Where a declaration for release for free circulation is presented in respect of the products falling under the CN codes or TARIC codes listed in Annex II, the supplementary unit provided in that Annex shall be entered in the relevant field of that declaration.

Article 4

Regulation (EU) No 1344/2011 is hereby repealed.

Article 5

This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.

It shall apply from 1 January 2014.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 17 December 2013.

For the Council

The President

L. LINKEVIČIUS

(1)  Council Regulation (EU) No 1344/2011 of 19 December 2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products and repealing Regulation (EC) No 1255/96 (OJ L 349, 31.12.2011, p. 1).

(2)  Council Regulation (EU) No 1220/2012 of 3 December 2012 on trade related measures to guarantee the supply of certain fishery products to Union processors from 2013 to 2015, amending Regulations (EC) No 104/2000 and (EU) No 1344/2011 (OJ L 349, 19.12.2012, p. 4).

(3)  Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 256, 7.9.1987, p. 1).

ANNEX I

CN code

TARIC

Description

Rate of autonomous duty

Date foreseen for mandatory review

ex 0710 21 00

10

Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals (1)  (2)

0 %

31.12.2018

ex 0710 80 95

50

Bamboo shoots, frozen, not put up for retail sale

0 %

31.12.2018

ex 0711 59 00

11

Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry (1)

0 %

31.12.2016

ex 0712 32 00

ex 0712 33 00

ex 0712 39 00

10

10

31

Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale (1)  (2)

0 %

31.12.2018

ex 0804 10 00

30

Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries (1)

0 %

31.12.2018

ex 0810 40 50

10

Cranberries of the species Vaccinium macrocarpon, fresh, for use in the manufacture (excluding packing) of products of drink or food industries (1)

0 %

31.12.2018

0811 90 50

0811 90 70

ex 0811 90 95

70

Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter

0 %

31.12.2018

ex 0811 90 95

20

Boysenberries, frozen, not containing added sugar, not put up for retail sale

0 %

31.12.2018

ex 0811 90 95

30

Pineapple (Ananas comosus), in pieces, frozen

0 %

31.12.2018

ex 0811 90 95

40

Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter

0 %

31.12.2018

ex 1511 90 19

ex 1511 90 91

ex 1513 11 10

ex 1513 19 30

ex 1513 21 10

ex 1513 29 30

10

10

10

10

10

10

Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:

—

industrial monocarboxylic fatty acids of subheading 3823 19 10,

—

methyl esters of fatty acids of heading 2915 or 2916,

—

fatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products,

—

fatty alcohols of subheading 2905 16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,

—

stearic acid of subheading 3823 11 00 or

—

goods of heading 3401 (1)

0 %

31.12.2018

ex 1515 90 99

92

Vegetable oil, refined, containing by weight 35 % or more but not more than 50 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid

0 %

31.12.2018

ex 1516 20 96

20

Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process

0 %

31.12.2014

ex 1517 90 99

10

Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 50 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO)

0 %

31.12.2016

ex 1902 30 10

ex 1903 00 00

10

20

Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale

0 %

31.12.2018

ex 2005 91 00

10

Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg

0 %

31.12.2018

ex 2007 99 50

ex 2007 99 50

81

91

Acerola puree concentrate, obtained by cooking:

—

of the Genus Malpighia spp.,

—

with a sugar content by weight of more than 13 % but not more than 30 %

for use in the manufacture of products of food and drink industry (1)

9 % (3)

31.12.2017

ex 2007 99 50

ex 2007 99 50

82

92

Acidified banana puree concentrate, obtained by cooking:

—

of the Genus Musa cavendish,

—

with a sugar content by weight of more than 13 % but not more than 30 %

for use in the manufacture of products of food and drink industry (1)

11,5 % (3)

31.12.2017

ex 2007 99 50

ex 2007 99 50

ex 2007 99 93

83

93

10

Mango puree concentrate, obtained by cooking:

—

of the Genus Mangifera spp.,

—

with a sugar content by weight of not more than 30 %

for use in the manufacture of products of food and drink industry (1)

6 % (3)

31.12.2017

ex 2007 99 50

ex 2007 99 50

84

94

Papaya puree concentrate, obtained by cooking:

—

of the Genus Carica spp.,

—

with a sugar content by weight of more than 13 % but not more than 30 %

for use in the manufacture of products of food and drink industry (1)

7,8 % (3)

31.12.2017

ex 2007 99 50

ex 2007 99 50

85

95

Guava puree concentrate, obtained by cooking:

—

of the Genus Psidium spp.,

—

with a sugar content by weight of more than 13 % but not more than 30 %

for use in the manufacture of products of food and drink industry (1)

6 % (3)

31.12.2017

ex 2008 93 91

20

Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries (4)

0 %

31.12.2017

ex 2008 99 48

94

Mango puree:

—

not from concentrate,

—

of the genus Mangifera,

—

of a Brix value of 14 or more, but not more than 20

used in the manufacture of products of drink industry (1)

6 %

31.12.2015

ex 2008 99 49

ex 2008 99 99

30

40

Seedless boysenberry puree not containing added spirit, whether or not containing added sugar

0 %

31.12.2014

ex 2008 99 49

ex 2008 99 99

70

11

Blanched vine leaves of the genus Karakishmish, in brine, containing by weight:

—

more than 6 % of salt concentration,

—

0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate and

—

whether or not but not more than 2 000 mg/kg of sodium benzoate according CODEX STAN 192-1995

for use in the manufacture of stuffed vine leaves with rice (1)

0 %

31.12.2017

ex 2009 41 92

ex 2009 41 99

20

70

Pineapple juice:

—

not from concentrate,

—

of the genus Ananas,

—

of a Brix value of 11 or more but not more than 16,

used in the manufacture of products of drink industry (1)

8 %

31.12.2015

ex 2009 49 30

91

Pineapple juice, other than in powder form:

—

with a Brix value of more than 20 but not more than 67,

—

a value of more than EUR 30 per 100 kg net weight,

—

containing added sugars

used in the manufacture of products of food or drink industry (1)

0 %

31.12.2014

ex 2009 81 31

10

Cranberry juice concentrate:

—

of a Brix value of 40 or more but not more than 66,

—

in immediate packings of a content of 50 litres or more

0 %

31.12.2014

ex 2009 89 79

20

Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packing of a content of 50 litres or more

0 %

31.12.2016

ex 2009 89 79

30

Frozen acerola juice concentrate:

—

with a Brix value of more than 48 but not more than 67,

—

in immediate packings of a content of 50 litres or more

0 %

31.12.2018

ex 2009 89 79

85

Acai berry juice concentrate:

—

of the species Euterpe oleracea,

—

frozen,

—

not sweetened,

—

not in powder form,

—

of a Brix value of 23 or more but not more than 32,

in immediate packings of a content of 10 kg or more

0 %

31.12.2016

ex 2009 89 99

93

Untreated frozen coconut water, in immediate packing of a content of 50 litres or more

0 %

31.12.2016

ex 2106 10 20

10

Soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate

0 %

31.12.2018

ex 2106 90 92

45

Preparation containing by weight:

—

more than 30 % but not more than 35 % licorice extract,

—

more than 65 % but not more than 70 % tricaprylin,

standardized by weight to 3 % or more but not more than 4 % glabridin

0 %

31.12.2016

ex 2519 90 10

10

Fused magnesia with a purity by weight of 97 % or more

0 %

31.12.2016

ex 2804 50 90

10

Tellurium of a purity by weight of 99,99 % or more, but not more than 99,999 % by weight (CAS RN 13494-80-9)

0 %

31.12.2018

2804 70 00

 

Phosphorus

0 %

31.12.2018

ex 2805 19 90

10

Lithium metal of a purity by weight of 99,7 % or more (CAS RN 7439-93-2)

0 %

31.12.2017

ex 2805 30 10

10

Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium

0 %

31.12.2018

ex 2805 30 90

ex 2805 30 90

ex 2805 30 90

45

55

65

Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more

0 %

31.12.2015

ex 2811 19 80

10

Sulphamidic acid (CAS RN 5329-14-6)

0 %

31.12.2018

ex 2811 19 80

20

Hydrogen iodide (CAS RN 10034-85-2)

0 %

31.12.2016

ex 2811 19 80

30

Phosphorous acid (CAS RN 10294-56-1)/phosphonic acid (CAS RN 13598-36-2) used as an ingredient for production of additives used in poly(vinyl chloride) industry (1)

0 %

31.12.2017

ex 2811 22 00

10

Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)

0 %

31.12.2018

ex 2811 22 00

30

Balls of porous white silica of a particle size of more than 1 μm for use in the manufacture of cosmetic products (1)

0 %

31.12.2016

ex 2812 90 00

10

Nitrogen trifluoride (CAS RN 7783-54-2)

0 %

31.12.2018

ex 2816 40 00

10

Barium hydroxide (CAS RN 17194-00-2)

0 %

31.12.2017

ex 2818 10 91

10

Sintered corundum with micro crystalline structure, containing by weight:

—

94 % or more, but not more than 98,5 % of α-Al2O3 (CAS RN 1344-28-1),

—

2 % (± 1,5 %) of magnesium spinel (CAS RN 1309-48-4),

—

1 % (± 0,6 %) of yttrium oxide (CAS RN 1314-36-9),

and

—

either 2 % (± 1,2 %) of lanthanum oxide (CAS RN 1312-81-8)

—

or 2 % (± 1,2 %) of lanthanum oxide (CAS RN 1312-81-8) and neodymium oxide (CAS RN 1313-97-9)

with less than 50 % of the total weight having a particle size of more than 10 mm

0 %

31.12.2015

ex 2818 20 00

10

Activated alumina with a specific surface area of at least 350 m2/g

0 %

31.12.2014

ex 2818 30 00

10

Aluminium hydroxide oxide in the form of pseudo-boehmite

4 %

31.12.2018

2819 10 00

 

Chromium trioxide (CAS RN 1333-82-0)

0 %

31.12.2016

ex 2819 90 90

10

Dichromium trioxide for use in metallurgy (CAS RN 1308-38-9) (1)

0 %

31.12.2016

ex 2823 00 00

10

Titanium dioxide (CAS RN 13463-67-7):

—

of a purity by weight of 99,9 % or more,

—

with an average grain-size of 1,2 μm or more but not more than 1,8 μm

—

with a specific surface of 5,0 m2/g or more, but not more than 7,5 m2/g

0 %

31.12.2017

ex 2823 00 00

20

Titanium dioxide (CAS RN 13463-67-7) with a purity by weight of 99,7 % or more and containing by weight:

—

not more than 0,005 % of potassium and sodium combined (expressed as elemental sodium and elemental potassium),

—

not more than 0,01 % of phosphorus (expressed as elemental phosphorus),

for use in the metallurgy (1)

0 %

31.12.2017

ex 2825 10 00

10

Hydroxylammonium chloride (CAS RN 5470-11-1)

0 %

31.12.2017

ex 2825 50 00

20

Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride

0 %

31.12.2018

ex 2825 60 00

10

Zirconium dioxide (CAS RN 1314-23-4)

0 %

31.12.2017

ex 2826 19 90

10

Tungsten hexafluoride with a purity of 99,9 % by weight or more (CAS RN 7783-82-6)

0 %

31.12.2015

ex 2826 90 80

15

Lithium hexafluorophosphate (CAS RN 21324-40-3)

0 %

31.12.2016

ex 2827 39 85

10

Copper monochloride of a purity by weight of 96 % or more but not more than 99 % (CAS RN 7758-89-6)

0 %

31.12.2018

ex 2827 39 85

20

Antimony pentachloride of a purity by weight of 99 % or more (CAS RN 7647-18-9)

0 %

31.12.2016

ex 2827 39 85

30

Manganese dichloride (CAS RN 7773-01-5)

0 %

31.12.2014

ex 2827 49 90

10

Hydrated zirconium dichloride oxide

0 %

31.12.2018

ex 2830 10 00

10

Disodium tetrasulphide, containing by weight 38 % or less of sodium calculated on the dry weight

0 %

31.12.2018

ex 2833 29 80

20

Manganese sulphate monohydrate (CAS RN 10034-96-5)

0 %

31.12.2018

ex 2833 29 80

30

Zirconium sulphate (CAS RN 14644-61-2)

0 %

31.12.2015

ex 2835 10 00

10

Sodium hypophosphite monohydrate (CAS RN 10039-56-2)

0 %

31.12.2017

ex 2836 91 00

20

Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:

—

2 mg/kg or more of arsenic,

—

200 mg/kg or more of calcium,

—

200 mg/kg or more of chlorides,

—

20 mg/kg or more of iron,

—

150 mg/kg or more of magnesium,

—

20 mg/kg or more of heavy metals,

—

300 mg/kg or more of potassium,

—

300 mg/kg or more of sodium,

—

200 mg/kg or more of sulphates,

determined according to the methods specified in the European Pharmacopœia

0 %

31.12.2018

ex 2836 99 17

20

Zirconium (IV) basic carbonate (CAS RN 15667-84-2)

0 %

31.12.2018

ex 2837 19 00

20

Copper cyanide (CAS RN 544-92-3)

0 %

31.12.2018

ex 2837 20 00

10

Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9)

0 %

31.12.2016

ex 2837 20 00

20

Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5)

0 %

31.12.2017

ex 2839 19 00

10

Disodium disilicate (CAS RN 13870-28-5)

0 %

31.12.2017

ex 2839 90 00

20

Calcium silicate (CAS RN 1344-95-2)

0 %

31.12.2018

2841 30 00

 

Sodium dichromate (CAS RN 10588-01-9)

0 %

31.12.2018

ex 2841 80 00

10

Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)

0 %

31.12.2017

ex 2841 90 85

10

Lithium cobalt(III) oxide with a cobalt content of at least 59 % (CAS RN 12190-79-3)

0 %

31.12.2017

ex 2841 90 85

20

Potassium titanium oxide in powder form with a purity of 99 % or more (CAS RN 12056-51-8)

0 %

31.12.2018

ex 2842 10 00

10

Synthetic Beta Zeolite powder

0 %

31.12.2018

ex 2842 10 00

20

Synthetic Chabasite Zeolite Powder

0 %

31.12.2014

ex 2842 90 10

10

Sodium selenate (CAS RN 13410-01-0)

0 %

31.12.2014

ex 2843 29 00

10

Silver oxide, nitrate- and carbonate-free, with a silver content of at least 99,99 % by weight of the metal content, for the manufacture of silver oxide batteries (1)

0 %

31.12.2016

2845 10 00

 

Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0)

0 %

31.12.2018

2845 90 10

 

Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)

0 %

31.12.2018

ex 2845 90 90

10

Helium-3 (CAS RN 14762-55-1)

0 %

31.12.2016

ex 2845 90 90

20

Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2)

0 %

31.12.2018

ex 2845 90 90

30

(13C)Carbon monoxide (CAS RN 1641-69-6)

0 %

31.12.2016

ex 2845 90 90

40

Iron boride enriched at a level of more than 95 % by weight with boron-10 (CAS RN 200513-39-9)

0 %

31.12.2018

ex 2846 10 00

ex 3824 90 97

10

48

Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight

0 %

31.12.2018

ex 2846 10 00

20

Dicerium tricarbonate, whether or not hydrated (CAS RN 537-01-9)

0 %

31.12.2018

ex 2846 10 00

30

Cerium lanthanum carbonate, whether or not hydrated

0 %

31.12.2018

ex 2846 10 00

40

Cerium lanthanum neodymium praseodymium carbonate, whether or not hydrated

0 %

31.12.2014

2846 90 00

 

Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 00

0 %

31.12.2018

ex 2848 00 00

10

Phosphine (CAS RN 7803-51-2)

0 %

31.12.2018

ex 2850 00 20

10

Silane (CAS RN 7803-62-5)

0 %

31.12.2018

ex 2850 00 20

20

Arsine (CAS RN 7784-42-1)

0 %

31.12.2018

ex 2850 00 20

30

Titanium nitride with a particle size of not more than 250 nm (CAS RN 25583-20-4)

0 %

31.12.2017

ex 2850 00 20

40

Germanium tetrahydride (CAS RN 7782-65-2)

0 %

31.12.2016

ex 2850 00 20

50

Sodium tetrahydroborate (CAS 16940-66-2) with:

—

a purity by weight of 98 % or more and

—

not more than 10ppm iron

for use as an additive in the manufacture of oxygen barrier polymer articles (1)

0 %

31.12.2017

ex 2850 00 60

10

Sodium azide (CAS RN 26628-22-8)

0 %

31.12.2018

ex 2853 00 90

10

Chlorosulphonyl isocyanate (CAS RN 1189-71-5)

0 %

31.12.2016

ex 2903 39 90

10

Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0)

0 %

31.12.2018

ex 2903 39 90

15

Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0)

0 %

31.12.2016

ex 2903 39 90

25

2,3,3,3-Tetrafluoroprop-1-ene (CAS RN 754-12-1)

0 %

31.12.2017

ex 2903 39 90

30

Perfluoroethane (CAS RN 76-16-4)

0 %

31.12.2018

ex 2903 39 90

40

1,1-Difluoroethane (CAS RN 75-37-6)

0 %

31.12.2018

ex 2903 39 90

50

1,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1)

0 %

31.12.2018

ex 2903 39 90

70

1,1,1,2-Tetrafluoroethane, certified odourless containing a maximum:

—

600 ppm by weight of 1,1,2,2-tetrafluoroethane,

—

2 ppm by weight of pentafluoroethane,

—

2 ppm by weight of chlorodifluoromethane,

—

2 ppm by weight of chloropentafluoroethane,

—

2 ppm by weight of dichlorodifluoromethane

for use in the manufacture of pharmaceutical grade propellant for medical metred dose inhalers (CAS RN 811-97-2) (1)

0 %

31.12.2016

ex 2903 39 90

75

Trans-1,3,3,3-tetrafluoroprop-1-ene (CAS RN 1645-83-6)

0 %

31.12.2018

ex 2903 39 90

80

Hexafluoropropene (CAS RN 116-15-4)

0 %

31.12.2016

ex 2903 77 30

10

1,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5)

0 %

31.12.2018

ex 2903 77 90

10

Chlorotrifluoroethylene (CAS RN 79-38-9)

0 %

31.12.2016

ex 2903 89 90

10

1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9)

0 %

31.12.2018

ex 2903 89 90

30

Octafluorocyclopentene (CAS RN 559-40-0)

0 %

31.12.2016

ex 2903 89 90

40

Hexabromocyclododecane

0 %

31.12.2016

ex 2903 89 90

50

Chlorocyclopentane (CAS RN 930-28-9)

0 %

31.12.2017

ex 2903 99 90

20

1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)

0 %

31.12.2018

ex 2903 99 90

40

2,6-Dichlorotoluene, of a purity by weight of 99 % or more and containing:

—

0,001 mg/kg or less of tetrachlorodibenzodioxines,

—

0,001 mg/kg or less of tetrachlorodibenzofurans,

—

0,2 mg/kg or less of tetrachlorobiphenyls

0 %

31.12.2018

ex 2903 99 90

50

Fluorobenzene (CAS RN 462-06-6)

0 %

31.12.2018

ex 2903 99 90

70

α,α,α′,α′-Tetrachloro-o-xylen (CAS RN 25641-99-0)

0 %

31.12.2015

ex 2903 99 90

80

1-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9)

0 %

31.12.2018

ex 2903 99 90

85

2-Bromo-9H-fluorene (CAS RN 1133-80-8)

0 %

31.12.2018

ex 2904 10 00

30

Sodium p-styrenesulphonate (CAS RN 2695-37-6)

0 %

31.12.2014

ex 2904 10 00

50

Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)

0 %

31.12.2014

ex 2904 20 00

10

Nitromethane (CAS RN 75-52-5)

0 %

31.12.2015

ex 2904 20 00

20

Nitroethane (CAS RN 79-24-3)

0 %

31.12.2015

ex 2904 20 00

30

1-Nitropropane (CAS RN 108-03-2)

0 %

31.12.2015

ex 2904 20 00

40

2-Nitropropane (CAS RN 79-46-9)

0 %

31.12.2014

ex 2904 90 40

10

Trichloronitromethane, for the manufacture of goods of subheading 3808 92 (CAS RN 76-06-2) (1)

0 %

31.12.2014

ex 2904 90 95

20

1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)

0 %

31.12.2014

ex 2904 90 95

30

Tosyl chloride (CAS RN 98-59-9)

0 %

31.12.2014

ex 2904 90 95

40

4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)

0 %

31.12.2017

ex 2904 90 95

50

Ethanesulphonyl chloride (CAS RN 594-44-5)

0 %

31.12.2018

ex 2905 19 00

11

Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN

0 %

31.12.2018

ex 2905 19 00

30

2,6-Dimethylheptan-4-ol (CAS RN 108-82-7)

0 %

31.12.2018

ex 2905 19 00

40

2,6-Dimethylheptan-2-ol (CAS RN 13254-34-7)

0 %

31.12.2014

ex 2905 19 00

70

Titanium tetrabutanolate (CAS RN 5593-70-4)

0 %

31.12.2017

ex 2905 19 00

80

Titanium tetraisopropoxide (CAS RN 546-68-9)

0 %

31.12.2017

ex 2905 19 00

85

Titanium tetraethanolate (CAS RN 3087-36-3)

0 %

31.12.2018

ex 2905 29 90

10

3,5-Dimethylhex-1-yn-3-ol (CAS RN 107-54-0)

0 %

31.12.2014

ex 2905 29 90

20

Dec-9-en-1-ol (CAS RN 13019-22-2)

0 %

31.12.2014

ex 2905 29 90

30

Dodeca-8,10-dien-1-ol (CAS RN 33956-49-9)

0 %

31.12.2015

ex 2905 39 95

10

Propane-1,3-diol (CAS RN 504-63-2)

0 %

31.12.2015

ex 2905 39 95

20

Butane-1,2-diol (CAS RN 584-03-2)

0 %

31.12.2016

ex 2905 39 95

30

2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)

0 %

31.12.2016

ex 2905 39 95

40

Decane-1,10-diol (CAS RN 112-47-0)

0 %

31.12.2017

ex 2905 39 95

50

2-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2)

0 %

31.12.2018

ex 2905 49 00

10

Ethylidynetrimethanol (CAS RN 77-85-0)

0 %

31.12.2014

ex 2905 59 98

20

2,2,2-Trifluoroethanol (CAS RN 75-89-8)

0 %

31.12.2014

2906 11 00

 

Menthol (CAS RN 1490-04-6)

0 %

31.12.2018

ex 2906 19 00

10

Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)

0 %

31.12.2018

ex 2906 19 00

20

4,4′-Isopropylidenedicyclohexanol (CAS RN 80-04-6)

0 %

31.12.2018

ex 2906 29 00

10

2,2′-(m-Phenylene)dipropan-2-ol (CAS RN 1999-85-5)

0 %

31.12.2014

ex 2906 29 00

20

1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7)

0 %

31.12.2018

ex 2906 29 00

30

2-Phenylethanol (CAS RN 60-12-8)

0 %

31.12.2017

ex 2907 15 90

10

2-Naphthol (CAS RN 135-19-3)

0 %

31.12.2016

ex 2907 19 90

10

2,3,5-Trimethylphenol (CAS RN 697-82-5)

0 %

31.12.2014

ex 2907 19 90

20

Biphenyl-4-ol (CAS RN 92-69-3)

0 %

31.12.2018

ex 2907 21 00

10

Resorcinol (CAS RN 108-46-3)

0 %

31.12.2018

ex 2907 23 00

10

4,4′-Isopropylidenediphenol (CAS RN 80-05-7)

0 %

31.12.2017

ex 2907 29 00

15

6,6′-Di-tert-butyl-4,4′-butylidenedi-m-cresol (CAS RN 85-60-9)

0 %

31.12.2018

ex 2907 29 00

20

4,4′-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4)

0 %

31.12.2018

ex 2907 29 00

30

4,4′,4″-Ethylidynetriphenol (CAS RN 27955-94-8)

0 %

31.12.2018

ex 2907 29 00

35

4-[2-(4-Hydroxy-3-prop-2-enylphenyl)propan-2-yl]-2-prop-2-enylphenol (CAS RN 1745-89-7)

0 %

31.12.2016

ex 2907 29 00

40

2,3,5-Trimethylhydroquinone (CAS RN 700-13-0)

0 %

31.12.2016

ex 2907 29 00

45

2-Methylhydroquinone (CAS RN 95-71-6)

0 %

31.12.2016

ex 2907 29 00

50

6,6′,6″-Tricyclohexyl-4,4′,4″-butane-1,1,3-triyltri (m-cresol) (CAS RN 111850-25-0)

0 %

31.12.2018

ex 2907 29 00

55

Biphenyl-2,2′-diol (CAS RN 1806-29-7)

0 %

31.12.2017

ex 2907 29 00

70

2,2′,2″,6,6′,6″-Hexa-tert-butyl-α,α′,α″-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2)

0 %

31.12.2018

ex 2907 29 00

85

Phloroglucinol whether or not hydrated

0 %

31.12.2018

ex 2908 19 00

10

Pentafluorophenol (CAS RN 771-61-9)

0 %

31.12.2018

ex 2908 19 00

20

4,4′-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1)

0 %

31.12.2018

ex 2908 99 00

30

4-Nitrophenol (CAS RN 100-02-7)

0 %

31.12.2018

ex 2908 99 00

40

4,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4)

0 %

31.12.2017

ex 2909 19 90

20

Bis(2-chloroethyl) ether (CAS RN 111-44-4)

0 %

31.12.2018

ex 2909 19 90

30

Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more

0 %

31.12.2018

ex 2909 19 90

50

3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)

0 %

31.12.2016

ex 2909 19 90

60

1-Methoxyheptafluoropropane (CAS RN 375-03-1)

0 %

31.12.2018

ex 2909 20 00

10

8-Methoxycedrane (CAS RN 19870-74-7)

0 %

31.12.2016

ex 2909 30 38

10

Bis(pentabromophenyl) ether (CAS RN 1163-19-5)

0 %

31.12.2018

ex 2909 30 38

20

1,1′-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2)

0 %

31.12.2016

ex 2909 30 90

10

2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)

0 %

31.12.2014

ex 2909 30 90

20

1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)

0 %

31.12.2014

ex 2909 30 90

30

3,4,5-Trimethoxytoluene (CAS RN 6443-69-2)

0 %

31.12.2015

ex 2909 50 00

10

4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)

0 %

31.12.2018

ex 2909 50 00

20

Ubiquinol (CAS RN 992-78-9)

0 %

31.12.2015

ex 2909 60 00

10

Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)

0 %

31.12.2018

ex 2909 60 00

20

1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)

0 %

31.12.2016

ex 2910 90 00

15

1,2-Epoxycyclohexane (CAS RN 286-20-4)

0 %

31.12.2018

ex 2910 90 00

30

2,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5)

0 %

31.12.2018

ex 2910 90 00

80

Allyl glycidyl ether (CAS RN 106-92-3)

0 %

31.12.2016

ex 2912 29 00

40

(2E,4E,6E,8E,10E,12E)-2,7,11-Trimethyl-13-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8,10,12-tridecahexaenal (CAS RN 1638-05-7)

0 %

31.12.2016

ex 2912 29 00

50

4-Isobutylbenzaldehyde (CAS RN 40150-98-9)

0 %

31.12.2017

ex 2912 29 00

60

3,4-Dimethylbenzaldehyde (CAS RN 5973-71-7)

0 %

31.12.2018

ex 2912 49 00

10

3-Phenoxybenzaldehyde (CAS RN 39515-51-0)

0 %

31.12.2018

ex 2912 49 00

20

4-Hydroxybenzaldehyde (CAS RN 123-08-0)

0 %

31.12.2017

ex 2912 49 00

30

Salicylaldehyde (CAS RN 90-02-8)

0 %

31.12.2015

ex 2914 19 90

20

Heptan-2-one (CAS RN 110-43-0)

0 %

31.12.2017

ex 2914 19 90

30

3-Methylbutanone (CAS RN 563-80-4)

0 %

31.12.2017

ex 2914 19 90

40

Pentan-2-one (CAS RN 107-87-9)

0 %

31.12.2017

ex 2914 29 00

20

Cyclohexadec-8-enone (CAS RN 3100-36–5)

0 %

31.12.2018

ex 2914 29 00

30

(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)

0 %

31.12.2015

ex 2914 29 00

40

Camphor

0 %

31.12.2018

ex 2914 29 00

50

trans-β-Damascone (CAS RN 23726-91-2)

0 %

31.12.2016

ex 2914 39 00

30

Benzophenone (CAS RN 119-61-9)

0 %

31.12.2017

ex 2914 39 00

50

4-Phenylbenzophenone (CAS RN 2128-93-0)

0 %

31.12.2018

ex 2914 39 00

60

4-Methylbenzophenone (CAS RN 134-84-9)

0 %

31.12.2018

ex 2914 39 00

70

Benzil (CAS RN 134-81-6)

0 %

31.12.2017

ex 2914 39 00

80

4′-Methylacetophenone (CAS RN 122-00-9)

0 %

31.12.2017

ex 2914 50 00

20

3′-Hydroxyacetophenone (CAS RN 121-71-1)

0 %

31.12.2015

ex 2914 50 00

25

4′-Methoxyacetophenone (CAS RN 100-06-1)

0 %

31.12.2018

ex 2914 50 00

30

2′-Hydroxyacetophenone (CAS RN 118-93-4)

0 %

31.12.2018

ex 2914 50 00

36

2,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5)

0 %

31.12.2018

ex 2914 50 00

40

4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)

0 %

31.12.2016

ex 2914 50 00

45

3,4-Dihydroxybenzophenone (CAS RN 10425-11-3)

0 %

31.12.2017

ex 2914 50 00

60

2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)

0 %

31.12.2017

ex 2914 50 00

70

16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN 974-23-2)

0 %

31.12.2017

ex 2914 50 00

80

2′,6′-Dihydroxyacetophenone (CAS RN 699-83-2)

0 %

31.12.2018

ex 2914 69 90

10

2-Ethylanthraquinone (CAS RN 84-51-5)

0 %

31.12.2018

ex 2914 69 90

20

2-Pentylanthraquinone (CAS RN 13936-21-5)

0 %

31.12.2014

ex 2914 69 90

30

1,4-Dihydroxyanthraquinone (CAS RN 81-64-1)

0 %

31.12.2018

ex 2914 69 90

40

p-Benzoquinone (CAS RN 106-51-4)

0 %

31.12.2016

ex 2914 70 00

20

2,4′-Difluorobenzophenone (CAS RN 342-25-6)

0 %

31.12.2017

ex 2914 70 00

40

Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8)

0 %

31.12.2018

ex 2914 70 00

50

3′-Chloropropiophenone (CAS RN 34841-35-5)

0 %

31.12.2018

ex 2914 70 00

60

4′-tert-Butyl-2′,6′-dimethyl-3′,5′-dinitroacetophenone (CAS RN 81-14-1)

0 %

31.12.2015

ex 2914 70 00

70

4-Chloro-4′-hydroxybenzophenone (CAS RN 42019-78-3)

0 %

31.12.2016

ex 2915 29 00

10

Antimony triacetate (CAS RN 6923-52-0)

0 %

31.12.2018

ex 2915 39 00

20

Isopentyl acetate (CAS RN 123-92-2)

0 %

31.12.2017

ex 2915 39 00

40

tert-Butyl acetate (CAS RN 540-88-5)

0 %

31.12.2018

ex 2915 39 00

50

3-Acetylphenyl acetate (CAS RN 2454-35-5)

0 %

31.12.2014

ex 2915 39 00

60

Dodec-8-enyl acetate (CAS RN 28079-04-1)

0 %

31.12.2015

ex 2915 39 00

65

Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)

0 %

31.12.2015

ex 2915 39 00

70

Dodec-9-enyl acetate (CAS RN 16974-11-1)

0 %

31.12.2015

ex 2915 39 00

75

Isobornyl acetate (CAS RN 125-12-2)

0 %

31.12.2016

ex 2915 39 00

80

1-Phenylethyl acetate (CAS RN 93-92-5)

0 %

31.12.2016

ex 2915 39 00

85

2-tert-Butylcyclohexyl acetate (CAS RN 88-41-5)

0 %

31.12.2018

ex 2915 60 19

10

Ethyl butyrate (CAS RN 105-54-4)

0 %

31.12.2017

ex 2915 90 70

30

3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)

0 %

31.12.2017

ex 2915 90 70

40

Nonanoic acid (pelargonic acid) (CAS RN 112-05-0)

0 %

31.12.2018

ex 2915 90 70

50

Allyl heptanoate (CAS RN 142-19-8)

0 %

31.12.2014

ex 2915 90 70

55

Triethyl orthoformate (CAS RN 122-51-0)

0 %

31.12.2018

ex 2915 90 70

60

Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)

0 %

31.12.2015

ex 2915 90 70

70

Cobalt borate neodecanoate complexes, with a purity by weight of 92 % or more (CAS RN 68457-13-6)

0 %

31.12.2016

ex 2915 90 70

75

2,2-Dimethylbutyryl chloride (CAS RN 5856-77-9)

0 %

31.12.2017

ex 2915 90 70

80

Ethyl difluoroacetate (CAS RN 454-31-9)

0 %

31.12.2016

ex 2916 12 00

10

2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6)

0 %

31.12.2018

ex 2916 12 00

40

2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2)

0 %

31.12.2018

ex 2916 12 00

70

2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3)

0 %

31.12.2017

ex 2916 13 00

10

Hydroxyzinc methacrylate powder (CAS RN 63451-47-8)

0 %

31.12.2014

ex 2916 13 00

20

Zinc dimethacrylate, in the form of powder (CAS RN 13189-00-9)

0 %

31.12.2018

ex 2916 14 00

10

2,3-Epoxypropyl methacrylate (CAS RN 106-91-2)

0 %

31.12.2018

ex 2916 19 95

20

Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1)

0 %

31.12.2018

ex 2916 19 95

40

Sorbic acid for use in the manufacture of animal feeds (CAS RN 110-44-1) (1)

0 %

31.12.2018

ex 2916 20 00

50

Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6)

0 %

31.12.2018

ex 2916 20 00

60

3-Cyclohexylpropionic acid (CAS RN 701-97-3)

0 %

31.12.2015

ex 2916 31 00

10

Benzyl benzoate (CAS RN 120-51-4)

0 %

31.12.2016

ex 2916 39 90

10

2,3,4,5-Tetrafluorobenzoic acid (CAS RN 1201-31-6)

0 %

31.12.2016

ex 2916 39 90

15

2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)

0 %

31.12.2016

ex 2916 39 90

20

3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)

3,6 %

31.12.2018

ex 2916 39 90

25

2-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8)

0 %

31.12.2015

ex 2916 39 90

30

2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)

0 %

31.12.2015

ex 2916 39 90

35

Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9)

0 %

31.12.2018

ex 2916 39 90

38

6-Bromonaphthalene-2-carboxylic acid (CAS RN 5773-80-8)

0 %

31.12.2018

ex 2916 39 90

45

2-Chlorobenzoic acid (CAS RN 118-91-2)

0 %

31.12.2016

ex 2916 39 90

50

3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)

0 %

31.12.2018

ex 2916 39 90

55

4-tert-Butylbenzoic acid (CAS RN 98-73-7)

0 %

31.12.2017

ex 2916 39 90

60

4-Ethylbenzoyl chloride (CAS RN 16331-45-6)

0 %

31.12.2018

ex 2916 39 90

70

Ibuprofen (INN) (CAS RN 15687-27-1)

0 %

31.12.2018

ex 2916 39 90

75

m-Toluic acid (CAS RN 99-04-7)

0 %

31.12.2017

ex 2916 39 90

85

(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)

0 %

31.12.2017

ex 2917 11 00

20

Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)

0 %

31.12.2018

ex 2917 11 00

30

Cobalt oxalate (CAS RN 814-89-1)

0 %

31.12.2014

ex 2917 19 10

10

Dimethyl malonate (CAS RN 108-59-8)

0 %

31.12.2014

ex 2917 19 10

20

Diethyl malonate (CAS RN 105-53-3)

0 %

31.12.2017

ex 2917 19 90

20

Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate (CAS RN 23386-52-9)

0 %

31.12.2018

ex 2917 19 90

30

Ethylene brassylate (CAS RN 105-95-3)

0 %

31.12.2014

ex 2917 19 90

50

Tetradecanedioic acid (CAS RN 821-38-5)

0 %

31.12.2015

ex 2917 19 90

70

Itaconic acid (CAS RN 97-65-4)

0 %

31.12.2018

ex 2917 20 00

30

1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5)

0 %

31.12.2018

ex 2917 20 00

40

3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6)

0 %

31.12.2018

ex 2917 34 00

10

Diallyl phthalate (CAS RN 131-17-9)

0 %

31.12.2018

ex 2917 39 95

20

Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)

0 %

31.12.2015

ex 2917 39 95

30

Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)

0 %

31.12.2015

ex 2918 16 00

20

Calcium digluconate monohydrate (CAS RN 66905-23-5) for use in the manufacture of calcium gluconate lactate (CAS RN 11116-97-5) (1)

0 %

31.12.2018

ex 2918 19 98

20

L-Malic acid (CAS RN 97-67-6)

0 %

31.12.2018

ex 2918 29 00

10

Monohydroxynaphthoic acids

0 %

31.12.2018

ex 2918 29 00

35

Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)

0 %

31.12.2017

ex 2918 29 00

50

Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2)

0 %

31.12.2018

ex 2918 29 00

60

Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3)

0 %

31.12.2016

ex 2918 30 00

30

Methyl-2-benzoylbenzoate (CAS RN 606-28-0)

0 %

31.12.2018

ex 2918 30 00

50

Ethyl acetoacetate (CAS RN 141-97-9)

0 %

31.12.2017

ex 2918 99 90

10

3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0)

0 %

31.12.2018

ex 2918 99 90

15

Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)

0 %

31.12.2017

ex 2918 99 90

20

Methyl 3-methoxyacrylate (CAS RN 5788-17-0)

0 %

31.12.2014

ex 2918 99 90

30

Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2)

0 %

31.12.2018

ex 2918 99 90

40

trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)

0 %

31.12.2018

ex 2918 99 90

50

Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)

0 %

31.12.2018

ex 2918 99 90

60

3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)

0 %

31.12.2018

ex 2918 99 90

70

Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)

0 %

31.12.2014

ex 2918 99 90

80

Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate (CAS RN 62476-59-9)

0 %

31.12.2016

ex 2919 90 00

10

2,2′-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2)

0 %

31.12.2018

ex 2919 90 00

30

Aluminium hydroxybis[2,2′-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5)

0 %

31.12.2018

ex 2919 90 00

40

Tri-n-hexylphosphate (CAS RN 2528-39-4)

0 %

31.12.2018

ex 2919 90 00

50

Triethyl phosphate (CAS RN 78-40-0)

0 %

31.12.2016

ex 2920 19 00

10

Fenitrothion (ISO) (CAS RN 122-14-5)

0 %

31.12.2018

ex 2920 19 00

20

Tolclofos-methyl (ISO) (CAS RN 57018-04-9)

0 %

31.12.2018

ex 2920 90 10

10

Diethyl sulphate (CAS RN 64-67-5)

0 %

31.12.2018

ex 2920 90 10

20

Diallyl 2,2′-oxydiethyl dicarbonate (CAS RN 142-22-3)

0 %

31.12.2018

ex 2920 90 10

40

Dimethyl carbonate (CAS RN 616-38-6)

0 %

31.12.2018

ex 2920 90 10

50

Di-tert-butyl dicarbonate (CAS RN 24424-99-5)

0 %

31.12.2018

ex 2920 90 10

60

2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1)

0 %

31.12.2017

2920 90 30

 

Trimethyl phosphite (CAS RN 121-45-9)

0 %

31.12.2018

2920 90 40

 

Triethyl phosphite (CAS RN 122-52-1)

0 %

31.12.2016

ex 2920 90 85

10

O,O′-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6)

0 %

31.12.2018

ex 2920 90 85

20

Tris(methylphenyl)phosphite (CAS RN 25586-42-9)

0 %

31.12.2015

ex 2920 90 85

30

2,2′-[[3,3′,5,5′-Tetrakis(1,1-dimethylethyl)[1,1′-biphenyl]-2,2′-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine], (CAS RN 138776-88-2)

0 %

31.12.2015

ex 2920 90 85

40

Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)

0 %

31.12.2015

ex 2920 90 85

50

Fosetyl-aluminium (CAS RN 39148-24-8)

0 %

31.12.2018

ex 2920 90 85

60

Bis(neopentylglycolato)diboron (CAS RN 201733-56-4)

0 %

31.12.2018

ex 2921 19 50

ex 2929 90 00

10

20

Diethylamino-triethoxysilane (CAS RN 35077-00-0)

0 %

31.12.2014

ex 2921 19 60

10

2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)

0 %

31.12.2017

ex 2921 19 99

20

Ethyl(2-methylallyl)amine (CAS RN 18328-90-0)

0 %

31.12.2018

ex 2921 19 99

30

Allylamine (CAS RN 107-11-9)

0 %

31.12.2018

ex 2921 19 99

60

Tetrakis(ethylmethylamino) zirconium (IV), (CAS RN 175923-04-3)

0 %

31.12.2018

ex 2921 19 99

70

N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8)

0 %

31.12.2017

ex 2921 29 00

20

Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0)

0 %

31.12.2018

ex 2921 29 00

30

Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1)

0 %

31.12.2018

ex 2921 29 00

40

Decamethylenediamine (CAS RN 646-25-3)

0 %

31.12.2015

ex 2921 29 00

50

N′-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine, (CAS RN 6711-48-4)

0 %

31.12.2016

ex 2921 30 99

30

1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)

0 %

31.12.2015

ex 2921 30 99

40

Cyclopropylamin (CAS RN 765-30-0)

0 %

31.12.2017

ex 2921 42 00

15

4-Amino-3-nitrobenzenesulphonic acid (CAS RN 616-84-2)

0 %

31.12.2018

ex 2921 42 00

20

3-Chloroaniline (CAS RN 108-42-9)

0 %

31.12.2018

ex 2921 42 00

25

Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5)

0 %

31.12.2018

ex 2921 42 00

35

2-Nitroaniline (CAS RN 88-74-4)

0 %

31.12.2018

ex 2921 42 00

45

2,4,5-Trichloroaniline (CAS RN 636-30-6)

0 %

31.12.2018

ex 2921 42 00

50

3-Aminobenzenesulfonic acid (CAS RN 121-47-1)

0 %

31.12.2018

ex 2921 42 00

70

2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)

0 %

31.12.2014

ex 2921 42 00

80

4-Chloro-2-nitroaniline (CAS RN 89-63-4)

0 %

31.12.2018

ex 2921 42 00

82

2-Chloro-4-nitroaniline (CAS RN 121-87-9)

0 %

31.12.2015

ex 2921 42 00

85

3,5-Dichloroaniline (CAS RN 626-43-7)

0 %

31.12.2018

ex 2921 42 00

86

2,5-Dichloroaniline of a purity by weight of 99,5 % or more (CAS RN 95-82-9)

0 %

31.12.2017

ex 2921 42 00

87

N-Methylaniline (CAS RN 100-61-8)

0 %

31.12.2017

ex 2921 42 00

88

3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)

0 %

31.12.2017

ex 2921 43 00

20

4-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7)

0 %

31.12.2018

ex 2921 43 00

30

3-Nitro-p-toluidine (CAS RN 119-32-4)

0 %

31.12.2018

ex 2921 43 00

40

4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)

0 %

31.12.2018

ex 2921 43 00

50

4-Aminobenzotrifluoride (CAS RN 455-14-1)

0 %

31.12.2015

ex 2921 43 00

60

3-Aminobenzotrifluoride (CAS RN 98-16-8)

0 %

31.12.2015

ex 2921 43 00

70

N-Ethyl-m-toluidine (CAS RN 102-27-2)

0 %

31.12.2016

ex 2921 43 00

80

6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6)

0 %

31.12.2017

ex 2921 44 00

20

Diphenylamine (CAS RN 122-39-4)

0 %

31.12.2018

ex 2921 45 00

10

Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5)

0 %

31.12.2014

ex 2921 45 00

20

2-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6)

0 %

31.12.2018

ex 2921 45 00

40

1-Naphthylamine (CAS RN 134-32-7)

0 %

31.12.2014

ex 2921 45 00

50

7-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6)

0 %

31.12.2018

ex 2921 49 00

20

Pendimethalin (ISO) (CAS RN 40487-42-1)

3,5 %

31.12.2018

ex 2921 49 00

40

N-1-Naphthylaniline (CAS RN 90-30-2)

0 %

31.12.2018

ex 2921 49 00

60

N-Benzyl-N-ethylaniline (CAS RN 92-59-1)

0 %

31.12.2014

ex 2921 49 00

70

2-Chlorobenzylamine (CAS RN 89-97-4)

0 %

31.12.2015

ex 2921 49 00

80

4-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5)

0 %

31.12.2015

ex 2921 49 00

85

4-Isopropylaniline (CAS RN 99-88-7)

0 %

31.12.2017

ex 2921 51 19

20

Toluene diamine (TDA), containing by weight 78 % or more but not more than 82 % of 4-methyl-m-phenylenediamine and 18 % or more but not more than 22 % of 2-methyl-m-phenylenediamine, and with a residual tar content of not more than 0,23 % by weight

0 %

31.12.2018

ex 2921 51 19

30

2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)

0 %

31.12.2018

ex 2921 51 19

40

p-Phenylenediamine (CAS RN 106-50-3)

0 %

31.12.2016

ex 2921 51 19

50

Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene

0 %

31.12.2014

ex 2921 51 19

60

2,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1)

0 %

31.12.2018

ex 2921 59 90

10

Mixture of isomers of 3,5-diethyltoluenediamine

0 %

31.12.2018

ex 2921 59 90

30

3,3′-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)

0 %

31.12.2017

ex 2921 59 90

40

4,4′-Diaminostilbene-2,2′-disulphonic acid (CAS RN 81-11-8)

0 %

31.12.2018

ex 2921 59 90

50

N-Ethyl-N′,N′-dimethyl-N-phenyl-ethylene-1,2-diamine (CAS RN 27692-91-7)

0 %

31.12.2014

ex 2921 59 90

60

(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)

0 %

31.12.2017

ex 2922 19 85

20

2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)

0 %

31.12.2017

ex 2922 19 85

25

Titanium bis(triethanolamine)diisopropoxide (CAS RN 36673-16-2)

0 %

31.12.2017

ex 2922 19 85

30

N,N,N′,N′-Tetramethyl-2,2′-oxybis(ethylamine) (CAS RN 3033-62-3)

0 %

31.12.2018

ex 2922 19 85

40

2-(Dimethylamino)ethyl benzoate (CAS RN 2208-05-1)

0 %

31.12.2014

ex 2922 19 85

45

2-[2-Hydroxyethyl(octadecyl)amino]ethanol (CAS RN 10213-78-2)

0 %

31.12.2016

ex 2922 19 85

50

2-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0)

0 %

31.12.2018

ex 2922 19 85

60

N,N,N′-trimethyl-N′-(2-hydroxy-ethyl) 2,2′-oxybis(ethylamine), (CAS RN 83016-70-0)

0 %

31.12.2018

ex 2922 19 85

65

trans-4-Aminocyclohexanol (CAS RN 27489-62-9)

0 %

31.12.2018

ex 2922 19 85

70

D-(-)-threo-2-amino-1-(p-nitrophenyl)propane-1,3-diol (CAS RN 716-61-0)

0 %

31.12.2016

ex 2922 19 85

75

2-Ethoxyethylamine (CAS RN 110-76-9)

0 %

31.12.2018

ex 2922 19 85

80

N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine, (CAS RN 189253-72-3)

0 %

31.12.2014

ex 2922 19 85

85

(1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0)

0 %

31.12.2018

ex 2922 21 00

10

2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2)

0 %

31.12.2018

ex 2922 21 00

30

6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7)

0 %

31.12.2014

ex 2922 21 00

40

7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5)

0 %

31.12.2018

ex 2922 21 00

50

Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate, (CAS RN 5460-09-3)

0 %

31.12.2014

ex 2922 21 00

60

4-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0)

0 %

31.12.2018

ex 2922 29 00

20

3-Aminophenol (CAS RN 591-27-5)

0 %

31.12.2018

ex 2922 29 00

25

5-Amino-o-cresol (CAS RN 2835-95-2)

0 %

31.12.2018

ex 2922 29 00

45

Anisidines

0 %

31.12.2018

ex 2922 29 00

55

3-Amino-4-hydroxybenzenesulphonic acid (CAS RN 98-37-3)

0 %

31.12.2014

ex 2922 29 00

65

4-Trifluoromethoxyaniline (CAS RN 461-82-5)

0 %

31.12.2014

ex 2922 29 00

70

4-Nitro-o-anisidine (CAS RN 97-52-9)

0 %

31.12.2018

ex 2922 29 00

75

4-(2-Aminoethyl)phenol (CAS RN 51-67-2)

0 %

31.12.2015

ex 2922 29 00

80

3-Diethylaminophenol (CAS RN 91-68-9)

0 %

31.12.2018

ex 2922 29 00

85

4-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6)

0 %

31.12.2018

ex 2922 39 00

10

1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts

0 %

31.12.2018

ex 2922 39 00

20

2-Amino-5-chlorobenzophenone (CAS RN 719-59-5)

0 %

31.12.2015

ex 2922 39 00

70

p-[(2-Chloroethyl)ethylamino]benzaldehyde (CAS RN 2643-07-4)

0 %

31.12.2016

ex 2922 43 00

10

Anthranilic acid (CAS RN 118-92-3)

0 %

31.12.2018

ex 2922 49 85

10

Ornithine aspartate (INNM) (CAS RN 3230-94-2)

0 %

31.12.2018

ex 2922 49 85

15

DL-Aspartic acid used for the manufacture of food-integrators, (CAS RN 617-45-8) (1)

0 %

31.12.2014

ex 2922 49 85

20

3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)

0 %

31.12.2017

ex 2922 49 85

40

Norvaline

0 %

31.12.2018

ex 2922 49 85

45

Glycine (CAS RN 56-40-6)

0 %

31.12.2015

ex 2922 49 85

50

D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)

0 %

31.12.2014

ex 2922 49 85

60

Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)

0 %

31.12.2017

ex 2922 49 85

70

2-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3)

0 %

31.12.2018

ex 2922 50 00

20

1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride, (CAS RN 130198-05-9)

0 %

31.12.2014

ex 2922 50 00

70

2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate

0 %

31.12.2018

ex 2923 90 00

10

Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide

0 %

31.12.2018

ex 2923 90 00

25

Tetrakis(dimethylditetradecylammonium) molybdate, (CAS RN 117342-25-3)

0 %

31.12.2018

ex 2923 90 00

45

Tetrabutylammonium hydroxide in the form of an aqueous solution containing 55 % (± 1 %) by weight of tetrabutylammonium hydroxide, (CAS RN 2052-49-5)

0 %

31.12.2014

ex 2923 90 00

70

Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:

—

40 % (± 2 %) by weight of tetrapropylammonium hydroxide,

—

0,3 % by weight or less of carbonate,

—

0,1 % by weight or less of tripropylamine,

—

500 mg/kg or less of bromide and

—

25 mg/kg or less of potassium and sodium taken together

0 %

31.12.2018

ex 2923 90 00

75

Tetraethylammonium hydroxide, in the form of an aqueous solution containing:

—

35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,

—

not more than 1 000 mg/kg of chloride,

—

not more than 2 mg/kg of iron and

—

not more than 10 mg/kg of potassium

0 %

31.12.2015

ex 2923 90 00

80

Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride, (CAS RN 7398-69-8)

0 %

31.12.2018

ex 2924 19 00

10

2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9)

0 %

31.12.2018

ex 2924 19 00

30

Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0)

0 %

31.12.2018

ex 2924 19 00

40

N-(1,1-Dimethyl-3-oxobutyl)acrylamide (CAS RN 2873-97-4)

0 %

31.12.2018

ex 2924 19 00

50

Acrylamide (CAS RN 79-06-1)

0 %

31.12.2018

ex 2924 19 00

60

N,N-Dimethylacrylamide (CAS RN 2680-03-7)

0 %

31.12.2016

ex 2924 19 00

70

Methylcarbamate (CAS RN 598-55-0)

0 %

31.12.2018

ex 2924 19 00

80

Tetrabutylurea (CAS RN 4559-86-8)

0 %

31.12.2017

ex 2924 21 00

10

4,4′-Dihydroxy-7,7′-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts

0 %

31.12.2018

ex 2924 21 00

20

(3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9)

0 %

31.12.2018

ex 2924 29 98

10

Alachlor (ISO), (CAS RN 15972-60-8)

0 %

31.12.2018

ex 2924 29 98

12

4-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2)

0 %

31.12.2018

ex 2924 29 98

15

Acetochlor (ISO), (CAS RN 34256-82-1)

0 %

31.12.2018

ex 2924 29 98

20

2-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide, (CAS RN 86763-47-5)

0 %

31.12.2014

ex 2924 29 98

27

2-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9)

0 %

31.12.2016

ex 2924 29 98

40

N,N′-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)

0 %

31.12.2015

ex 2924 29 98

45

Propoxur (ISO) (CAS RN 114-26-1)

0 %

31.12.2015

ex 2924 29 98

50

N,N′-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 42487-09-2)

0 %

31.12.2015

ex 2924 29 98

51

Methyl 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate (CAS RN 59673-82-4)

0 %

31.12.2017

ex 2924 29 98

53

4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)

0 %

31.12.2017

ex 2924 29 98

55

N,N′-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 24304-50-5)

0 %

31.12.2015

ex 2924 29 98

60

N,N′-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide], (CAS RN 41131-65-1)

0 %

31.12.2015

ex 2924 29 98

63

N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0)

0 %

31.12.2016

ex 2924 29 98

65

2-(4-Hydroxyphenyl)acetamide (CAS RN 17194-82-0)

0 %

31.12.2018

ex 2924 29 98

75

3-Amino-p-anisanilide (CAS RN 120-35-4)

0 %

31.12.2018

ex 2924 29 98

80

5′-Chloro-3-hydroxy-2′,4′-dimethoxy-2-naphthanilide (CAS RN 92-72-8)

0 %

31.12.2018

ex 2924 29 98

85

p-Aminobenzamide (CAS RN 2835-68-9)

0 %

31.12.2018

ex 2924 29 98

86

Anthranilamide of a purity by weight of 99,5 % or more (CAS RN 88-68-6)

0 %

31.12.2017

ex 2924 29 98

87

Paracetamol (INN) (CAS RN 103-90-2)

0 %

31.12.2018

ex 2924 29 98

88

5′-Chloro-3-hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-63-7)

0 %

31.12.2018

ex 2924 29 98

89

Flutolanil (ISO) (CAS RN 66332-96-5)

0 %

31.12.2018

ex 2924 29 98

91

3-Hydroxy-2′-methoxy-2-naphthanilide (CAS RN 135-62-6)

0 %

31.12.2018

ex 2924 29 98

92

3-Hydroxy-2-naphthanilide (CAS RN 92-77-3)

0 %

31.12.2014

ex 2924 29 98

93

3-Hydroxy-2′-methyl-2-naphthanilide (CAS RN 135-61-5)

0 %

31.12.2018

ex 2924 29 98

94

2′-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)

0 %

31.12.2018

ex 2924 29 98

97

1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)

0 %

31.12.2018

ex 2925 11 00

20

Saccharin and its sodium salt

0 %

31.12.2018

ex 2925 19 95

10

N-Phenylmaleimide (CAS RN 941-69-5)

0 %

31.12.2018

ex 2925 19 95

20

4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)

0 %

31.12.2017

ex 2925 19 95

30

N,N′-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)

0 %

31.12.2017

ex 2925 29 00

10

Dicyclohexylcarbodiimide (CAS RN 538-75-0)

0 %

31.12.2018

ex 2925 29 00

20

N-[3-(Dimethylamino)propyl]-N′-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)

0 %

01.01.2018

ex 2926 90 95

13

alpha-Bromo-o-toluonitrile (CAS RN 22115-41-9)

0 %

31.12.2018

ex 2926 90 95

20

2-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0)

0 %

31.12.2014

ex 2926 90 95

25

2,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2)

0 %

31.12.2016

ex 2926 90 95

30

2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanenitrile hydrochloride, (CAS RN 2544-13-0)

0 %

31.12.2015

ex 2926 90 95

50

Alkyl or alkoxyalkyl esters of cyanoacetic acid

0 %

31.12.2018

ex 2926 90 95

55

Methyl-2-cyano-2-phenylbutyrate (CAS RN 24131-07-5)

0 %

31.12.2016

ex 2926 90 95

60

Cyanoacetic acid in crystalline form (CAS RN 372-09-8)

0 %

31.12.2014

ex 2926 90 95

61

m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)

0 %

31.12.2016

ex 2926 90 95

63

1-(Cyanoacetyl)-3-ethylurea (CAS RN 41078-06-2)

0 %

31.12.2014

ex 2926 90 95

64

Esfenvalerate of a purity by weight of 83 % or more in a mixture of its own isomers (CAS RN 66230-04-4)

0 %

31.12.2014

ex 2926 90 95

65

Malononitrile (CAS RN 109-77-3)

0 %

31.12.2018

ex 2926 90 95

70

Methacrylonitrile (CAS RN 126-98-7)

0 %

31.12.2014

ex 2926 90 95

74

Chlorothalonil (ISO) (CAS RN 1897-45-6)

0 %

31.12.2014

ex 2926 90 95

75

Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0)

0 %

31.12.2014

ex 2926 90 95

80

Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)

0 %

31.12.2018

ex 2926 90 95

86

Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)

0 %

31.12.2018

ex 2926 90 95

89

Butyronitrile (CAS RN 109-74-0)

0 %

31.12.2018

ex 2927 00 00

10

2,2′-Dimethyl-2,2′-azodipropionamidine dihydrochloride

0 %

31.12.2018

ex 2927 00 00

20

4-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305-05-2)

0 %

31.12.2018

ex 2927 00 00

30

4′-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)

0 %

31.12.2018

ex 2927 00 00

70

Tetrasodium 3,3′-[azoxybis[(2-methoxy-4,1-phenylene)azo]]bis[4,5-dihydroxynaphthalene-2,7-disulphonate], (CAS RN 83968-64-3)

0 %

31.12.2014

ex 2927 00 00

80

4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7)

0 %

31.12.2017

ex 2928 00 90

10

3,3′-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N′-bipropionamide (CAS RN 32687-78-8)

0 %

31.12.2018

ex 2928 00 90

25

Acetaldehyde oxime in an aqueous solution (CAS RN 107-29-9)

0 %

31.12.2015

ex 2928 00 90

30

N-Isopropylhydroxylamine (CAS RN 5080-22-8)

0 %

31.12.2016

ex 2928 00 90

35

2-Chloro-N-methoxy-N-methylacetamide (CAS RN 67442-07-3)

0 %

31.12.2018

ex 2928 00 90

40

O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2)

0 %

31.12.2018

ex 2928 00 90

45

Tebufenozide (ISO) (CAS RN 112410-23-8)

0 %

31.12.2018

ex 2928 00 90

55

Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1)

0 %

31.12.2018

ex 2928 00 90

60

Adipohydrazide (CAS RN 1071-93-8)

0 %

31.12.2018

ex 2928 00 90

70

Butanone oxime (CAS RN 96-29-7)

0 %

31.12.2018

ex 2928 00 90

75

Metaflumizone (ISO) (CAS RN 139968-49-3)

0 %

31.12.2016

ex 2928 00 90

80

Cyflufenamid (ISO) (CAS RN 180409-60-3)

0 %

31.12.2018

ex 2928 00 90

85

Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5)

0 %

31.12.2016

ex 2929 10 00

10

Methylenedicyclohexyl diisocyanates (CAS RN 28605-81-4)

0 %

31.12.2018

ex 2929 10 00

15

3,3′-Dimethylbiphenyl-4,4′-diyl diisocyanate (CAS RN 91-97-4)

0 %

31.12.2014

ex 2929 10 00

20

Butyl isocyanate (CAS RN 111-36-4)

0 %

31.12.2017

ex 2929 10 00

40

m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7)

0 %

31.12.2018

ex 2929 10 00

50

m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9)

0 %

31.12.2018

ex 2929 10 00

55

2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8)

0 %

31.12.2015

ex 2929 10 00

60

Trimethylhexamethylene diisocyanate, mixed isomers

0 %

31.12.2018

ex 2929 10 00

80

1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1)

0 %

31.12.2016

ex 2930 20 00

10

Prosulfocarb (ISO) (CAS RN 52888-80-9)

0 %

31.12.2017

ex 2930 20 00

20

2-Isopropylethylthiocarbamate (CAS RN 141-98-0)

0 %

31.12.2016

ex 2930 90 99

10

2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)

0 %

31.12.2015

ex 2930 90 99

13

Mercaptamine hydrochloride (CAS RN 156-57-0)

0 %

31.12.2016

ex 2930 90 99

14

4-(Methylthio)benzaldehyde (CAS RN 3446-89-7)

0 %

31.12.2018

ex 2930 90 99

15

Ethoprophos (ISO) (CAS RN 13194-48-4)

0 %

31.12.2018

ex 2930 90 99

17

2-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4)

0 %

31.12.2018

ex 2930 90 99

18

1-Methyl-5-[3-methyl-4-[4-[(trifluoromethyl)thio]phenoxy]phenyl]biuret (CAS RN 106310-17-2)

0 %

31.12.2016

ex 2930 90 99

20

2-Methoxy-N-[2-nitro-5-(phenylthio)phenyl]acetamide (CAS RN 63470-85-9)

0 %

31.12.2015

ex 2930 90 99

23

Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8)

0 %

31.12.2018

ex 2930 90 99

25

Thiophanate-methyl (ISO), (CAS RN 23564-05-8)

0 %

31.12.2018

ex 2930 90 99

30

4-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6)

0 %

31.12.2018

ex 2930 90 99

35

Glutathione (CAS RN 70-18-8)

0 %

31.12.2016

ex 2930 90 99

40

3,3′-Thiodi(propionic acid) (CAS RN 111-17-1)

0 %

31.12.2018

ex 2930 90 99

45

2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5)

0 %

31.12.2018

ex 2930 90 99

50

[S-(R*,R*)]-2-Amino-1-[4-(methylthio)-phenyl]-1,3-propanediol, (CAS RN 23150-35-8)

0 %

31.12.2015

ex 2930 90 99

55

Thiourea (CAS RN 62-56-6)

0 %

31.12.2015

ex 2930 90 99

60

Methyl phenyl sulphide (CAS RN 100-68-5)

0 %

31.12.2018

ex 2930 90 99

62

Zinc bis(benzenesulfinate) (CAS RN 24308-84-7)

0 %

31.12.2014

ex 2930 90 99

64

3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2)

0 %

31.12.2014

ex 2930 90 99

65

Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7)

0 %

31.12.2015

ex 2930 90 99

66

Diphenyl sulphide (CAS RN 139-66-2)

0 %

31.12.2017

ex 2930 90 99

67

3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid (CAS RN 120100-05-2)

0 %

31.12.2018

ex 2930 90 99

68

Clethodim (ISO) (CAS RN 99129-21-2)

0 %

31.12.2017

ex 2930 90 99

77

4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7)

0 %

31.12.2018

ex 2930 90 99

78

4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)

0 %

31.12.2016

ex 2930 90 99

80

Captan (ISO) (CAS RN 133-06-2)

0 %

31.12.2018

ex 2930 90 99

81

Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)

3 %

31.12.2014

ex 2930 90 99

83

Methyl-p-tolyl sulphone (CAS RN 3185-99-7)

0 %

31.12.2017

ex 2930 90 99

84

2-Chloro-4-(methylsulphonyl)benzoic acid (CAS RN 53250-83-2)

0 %

31.12.2014

ex 2930 90 99

87

3-Sulphinobenzoic acid (CAS RN 15451-00-0)

0 %

31.12.2018

ex 2930 90 99

89

Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates

0 %

31.12.2016

ex 2931 90 90

05

Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane

0 %

31.12.2018

ex 2931 90 90

10

Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN

0 %

31.12.2015

ex 2931 90 90

14

Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution

0 %

31.12.2017

ex 2931 90 90

15

Triethylborane (CAS RN 97-94-9)

0 %

31.12.2015

ex 2931 90 90

18

Trioctylphosphine oxide (CAS RN 78-50-2)

0 %

31.12.2016

ex 2931 90 90

20

Methylcyclopentadienyl manganese tricarbonyl containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl, (CAS RN 12108-13-3)

0 %

31.12.2014

ex 2931 90 90

24

Methyl tris (2-pentanoneoxime) silane (CAS RN 37859-55-5)

0 %

31.12.2014

ex 2931 90 90

30

Diethylborane isopropoxide (CAS RN 74953-03-0)

0 %

31.12.2015

ex 2931 90 90

35

(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)

0 %

31.12.2017

ex 2931 90 90

40

N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6)

0 %

31.12.2014

ex 2931 90 90

50

Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6)

0 %

31.12.2018

ex 2931 90 90

55

Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492-55-7)

0 %

31.12.2014

ex 2931 90 90

70

N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3)

0 %

31.12.2014

ex 2931 90 90

72

Phenylphosphonic dichloride (CAS RN 824-72-6)

0 %

31.12.2016

ex 2931 90 90

75

Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1)

0 %

31.12.2016

ex 2931 90 90

86

Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane

0 %

31.12.2018

ex 2931 90 90

87

Tris(4-methylpentan-2-oximino)methylsilane (CAS RN 37859-57-7)

0 %

31.12.2018

ex 2931 90 90

89

Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)

0 %

31.12.2014

ex 2931 90 90

91

Trimethylsilane (CAS RN 993-07-7)

0 %

31.12.2016

ex 2931 90 90

92

Trimethylborane (CAS RN 593-90-8)

0 %

31.12.2014

ex 2931 90 90

96

3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8)

0 %

31.12.2018

ex 2932 13 00

10

Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)

0 %

31.12.2018

ex 2932 19 00

40

Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more

0 %

31.12.2014

ex 2932 19 00

41

2,2 di(tetrahydrofuryl)propane (CAS RN 89686-69-1)

0 %

31.12.2014

ex 2932 19 00

45

1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside, (CAS RN 56038-13-2)

0 %

31.12.2014

ex 2932 19 00

50

2-Methylfuran (CAS RN 534-22-5)

0 %

31.12.2015

ex 2932 19 00

70

Furfurylamine (CAS RN 617-89-0)

0 %

31.12.2014

ex 2932 19 00

75

Tetrahydro-2-methylfuran (CAS RN 96-47-9)

0 %

31.12.2018

ex 2932 19 00

80

5-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7)

0 %

31.12.2016

ex 2932 20 90

10

2′-Anilino-6′-[ethyl(isopentyl)amino]-3′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one (CAS RN 70516-41-5)

0 %

31.12.2018

ex 2932 20 90

15

Coumarin (CAS RN 91-64-5)

0 %

31.12.2016

ex 2932 20 90

20

Ethyl 6′-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9′-xanthene]-2′-carboxylate (CAS RN 154306-60-2)

0 %

31.12.2017

ex 2932 20 90

35

6′-Diethylamino-3′-methyl-2′-(2,4-xylidino)spiro[isobenzofuran-1(3H),9′-xanthen]-3-one (CAS RN 36431-22-8)

0 %

31.12.2018

ex 2932 20 90

40

(S)-(-)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9)

0 %

31.12.2017

ex 2932 20 90

55

6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7)

0 %

31.12.2018

ex 2932 20 90

60

6′-(Diethylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 29512-49-0)

0 %

31.12.2016

ex 2932 20 90

70

3′,6′-Bis(ethylamino)-2′,7′-dimethylspiro[isobenzofuran-1(3H),9′-[9H]-xanthen]-3-one, (CAS RN 41382-37-0)

0 %

31.12.2018

ex 2932 20 90

71

6′-(Dibutylamino)-3′-methyl-2′-(phenylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 89331-94-2)

0 %

31.12.2016

ex 2932 20 90

72

2′-[Bis(phenylmethyl)amino]-6′-(diethylamino)-spiro[isobenzofuran-1(3H),9′-[9H]xanthen]-3-one (CAS RN 34372-72-0)

0 %

31.12.2016

ex 2932 20 90

80

Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5)

0 %

31.12.2018

ex 2932 20 90

84

Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5)

0 %

31.12.2018

ex 2932 99 00

10

Bendiocarb (ISO) (CAS RN 22781-23-3)

0 %

31.12.2018

ex 2932 99 00

15

1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)

0 %

31.12.2016

ex 2932 99 00

20

Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1)

0 %

31.12.2016

ex 2932 99 00

25

1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)

0 %

31.12.2017

ex 2932 99 00

35

1,2,3-Trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol, (CAS RN 882073-43-0)

0 %

31.12.2018

ex 2932 99 00

40

1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)

0 %

31.12.2018

ex 2932 99 00

45

2-Butylbenzofuran (CAS RN 4265-27-4)

0 %

31.12.2018

ex 2932 99 00

50

7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)

0 %

31.12.2015

ex 2932 99 00

55

6-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic acid (CAS RN 99199-60-7)

0 %

31.12.2018

ex 2932 99 00

70

1,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9)

0 %

31.12.2016

ex 2932 99 00

75

3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0)

0 %

31.12.2016

ex 2932 99 00

80

1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 32647-67-9)

0 %

31.12.2016

ex 2933 19 90

30

3-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0)

0 %

31.12.2018

ex 2933 19 90

40

Edaravone (INN) (CAS RN 89-25-8)

0 %

31.12.2018

ex 2933 19 90

50

Fenpyroximate (ISO) (CAS RN 134098-61-6)

0 %

31.12.2014

ex 2933 19 90

60

Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)

0 %

31.12.2014

ex 2933 19 90

70

4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)

0 %

31.12.2018

ex 2933 19 90

80

3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)

0 %

31.12.2017

ex 2933 19 90

85

Allyl 5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyrazolcarbothioate (CAS RN 473799-16-5)

0 %

31.12.2017

ex 2933 21 00

50

1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2)

0 %

31.12.2016

ex 2933 21 00

60

DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)

0 %

31.12.2016

ex 2933 21 00

70

α-(4-Methoxybenzoyl)-α-(1-benzyl-5-ethoxy-3-hydantoinyl)-2-chloro-5-dodecyloxycarbonylacetanilide, (CAS RN 70950-45-7)

0 %

31.12.2016

ex 2933 21 00

80

5,5-Dimethylhydantoin (CAS RN 77-71-4)

0 %

31.12.2015

ex 2933 29 90

15

Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0)

0 %

31.12.2018

ex 2933 29 90

25

Prochloraz (ISO) (CAS RN 67747-09-5)

0 %

31.12.2018

ex 2933 29 90

35

1-Trityl-4-formylimidazole (CAS RN 33016-47-6)

0 %

31.12.2018

ex 2933 29 90

40

Triflumizole (ISO) (CAS RN 68694-11-1)

0 %

31.12.2014

ex 2933 29 90

45

Prochloraz copper chloride (ISO) (CAS RN 156065-03-1)

0 %

31.12.2018

ex 2933 29 90

50

1,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9)

0 %

31.12.2018

ex 2933 29 90

60

1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2)

0 %

31.12.2016

ex 2933 29 90

70

Cyazofamid (ISO) (CAS RN 120116-88-3)

0 %

31.12.2016

ex 2933 29 90

80

Imazalil (ISO) (CAS RN 35554-44-0)

0 %

31.12.2017

ex 2933 39 99

12

2,3-Dichloropyridine (CAS RN 2402-77-9)

0 %

31.12.2017

ex 2933 39 99

15

Pyridine-2,3-dicarboxylic acid (CAS RN 89-00-9)

0 %

31.12.2018

ex 2933 39 99

18

6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)

0 %

31.12.2017

ex 2933 39 99

20

Copper pyrithione powder (CAS RN 14915-37-8)

0 %

31.12.2014

ex 2933 39 99

24

2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)

0 %

31.12.2014

ex 2933 39 99

25

Imazethapyr (ISO) (CAS RN 81335-77-5)

0 %

31.12.2018

ex 2933 39 99

30

Fluazinam (ISO) (CAS RN 79622-59-6)

0 %

31.12.2014

ex 2933 39 99

32

2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2)

0 %

31.12.2016

ex 2933 39 99

35

Aminopyralid (ISO) (CAS RN 150114-71-9)

0 %

31.12.2018

ex 2933 39 99

37

Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2)

0 %

31.12.2016

ex 2933 39 99

40

2-Chloropyridine (CAS RN 109-09-1)

0 %

31.12.2018

ex 2933 39 99

42

2,2,6,6-Tetramethylpiperidine (CAS RN 768-66-1)

0 %

31.12.2016

ex 2933 39 99

45

5-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole, (CAS RN 102625-64-9)

0 %

31.12.2014

ex 2933 39 99

47

(-)-trans-4-(4′-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)

0 %

31.12.2014

ex 2933 39 99

48

Flonicamid (ISO) (CAS RN 158062-67-0)

0 %

31.12.2014

ex 2933 39 99

49

2-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]thio]-1H-benzimidazole, (CAS RN 103577-40-8)

0 %

31.12.2015

ex 2933 39 99

50

N-Fluoro-2,6-dichloropyridinium tetrafluoroborate (CAS RN 140623-89-8)

0 %

31.12.2016

ex 2933 39 99

53

3-Bromopyridine (CAS RN 626-55-1)

0 %

31.12.2018

ex 2933 39 99

55

Pyriproxyfen (ISO) of a purity by weight of 97 % or more (CAS RN 95737-68-1)

0 %

31.12.2014

ex 2933 39 99

57

Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)

0 %

31.12.2017

ex 2933 39 99

60

2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0)

0 %

31.12.2018

ex 2933 39 99

63

2-Aminomethyl-3-chloro-5-trifluoromethylpyridine hydrochloride (CAS RN 326476-49-7)

0 %

31.12.2018

ex 2933 39 99

65

Acetamiprid (ISO) (CAS RN 135410-20-7)

0 %

31.12.2018

ex 2933 39 99

67

(1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2)

0 %

31.12.2018

ex 2933 39 99

70

2,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7)

0 %

31.12.2016

ex 2933 39 99

72

5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one (CAS RN 120014-30-4)

0 %

31.12.2016

ex 2933 39 99

77

Imazamox (ISO) (CAS RN 114311-32-9)

0 %

31.12.2018

ex 2933 39 99

85

2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)

0 %

31.12.2015

ex 2933 49 10

10

Quinmerac (ISO) (CAS RN 90717-03-6)

0 %

31.12.2018

ex 2933 49 10

20

3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7)

0 %

31.12.2018

ex 2933 49 10

30

Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6)

0 %

31.12.2017

ex 2933 49 90

30

Quinoline (CAS RN 91-22-5)

0 %

31.12.2015

ex 2933 49 90

40

Isoquinoline (CAS RN 119-65-3)

0 %

31.12.2015

ex 2933 49 90

60

5,6,7,8-Tetrahydroquinoline (CAS RN 10500-57-9)

0 %

31.12.2014

ex 2933 49 90

70

Quinolin-8-ol (CAS RN 148-24-3)

0 %

31.12.2018

ex 2933 52 00

10

Malonylurea (barbituric acid) (CAS RN 67-52-7)

0 %

31.12.2016

ex 2933 59 95

15

Sitagliptin phosphate monohydrate (CAS RN 654671-77-9)

0 %

01.07.2014

ex 2933 59 95

17

N,N′-(4,6-Dichloropyrimidine-2,5-diyl)diformamide (CAS RN 116477-30-6)

0 %

31.12.2018

ex 2933 59 95

20

2,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2)

0 %

31.12.2018

ex 2933 59 95

23

6-Chloro-3-methyluracil (CAS RN 4318-56-3)

0 %

31.12.2018

ex 2933 59 95

27

2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8)

0 %

31.12.2018

ex 2933 59 95

30

Mepanipyrim (ISO) (CAS RN 110235-47-7)

0 %

31.12.2018

ex 2933 59 95

45

1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)

0 %

31.12.2014

ex 2933 59 95

50

2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)

0 %

31.12.2014

ex 2933 59 95

55

Thiopental (INNM) (CAS RN 76-75-5)

0 %

31.12.2014

ex 2933 59 95

60

2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)

0 %

31.12.2018

ex 2933 59 95

65

1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate), (CAS RN 140681-55-6)

0 %

31.12.2014

ex 2933 59 95

70

N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)

0 %

31.12.2018

ex 2933 59 95

72

Triacetylganciclovir (CAS RN 86357-14-4)

0 %

31.12.2016

ex 2933 59 95

75

(2R,3S/2S,3R)-3-(6-Chloro-5-fluoro pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8)

0 %

31.12.2014

ex 2933 59 95

77

3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)

0 %

31.12.2017

ex 2933 69 80

25

1,3,5-Triazine-2,4,6-triamine monophosphate (CAS RN 20208-95-1)

0 %

31.12.2016

ex 2933 69 80

40

Troclosene sodium (INNM) (CAS RN 2893-78-9)

0 %

31.12.2016

ex 2933 69 80

50

1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9)

0 %

31.12.2018

ex 2933 69 80

55

Terbutryn (ISO) (CAS RN 886-50-0)

0 %

31.12.2015

ex 2933 69 80

60

Cyanuric acid (CAS RN 108-80-5)

0 %

31.12.2015

ex 2933 69 80

80

Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)

0 %

31.12.2018

ex 2933 79 00

30

5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)

0 %

31.12.2017

ex 2933 79 00

50

6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6)

0 %

31.12.2018

ex 2933 79 00

60

3,3-Pentamethylene-4-butyrolactam (CAS RN 64744-50-9)

0 %

31.12.2014

ex 2933 79 00

70

(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)

0 %

31.12.2015

ex 2933 99 80

10

2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol (CAS RN 3846-71-7)

0 %

31.12.2018

ex 2933 99 80

13

5-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7)

0 %

31.12.2016

ex 2933 99 80

15

2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1)

0 %

31.12.2018

ex 2933 99 80

18

4,4′-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-phenylaniline] (CAS RN 67707-04-4)

0 %

31.12.2017

ex 2933 99 80

20

2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7)

0 %

31.12.2018

ex 2933 99 80

22

(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)

0 %

31.12.2017

ex 2933 99 80

24

1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)

0 %

31.12.2017

ex 2933 99 80

28

N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN 26848-40-8)

0 %

31.12.2017

ex 2933 99 80

30

Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)

0 %

31.12.2018

ex 2933 99 80

32

5-[4′-(Bromomethyl)biphenyl-2-yl]-2-trityl-2H-tetrazole (CAS RN 133051-88-4)

0 %

31.12.2014

ex 2933 99 80

35

1,3,3-Trimethyl-2-methyleneindoline (CAS RN 118-12-7)

0 %

31.12.2014

ex 2933 99 80

37

8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)

0 %

31.12.2014

ex 2933 99 80

40

trans-4-Hydroxy-L-proline (CAS RN 51-35-4)

0 %

31.12.2018

ex 2933 99 80

43

2,3-Dihydro-1H-pyrrole[3,2,1-ij]quinoline (CAS RN 5840-01-7)

0 %

31.12.2017

ex 2933 99 80

45

Maleic hydrazide (ISO) (CAS RN 123-33-1)

0 %

31.12.2018

ex 2933 99 80

47

Paclobutrazol (ISO) (CAS RN 76738-62-0)

0 %

31.12.2017

ex 2933 99 80

50

Metconazole (ISO) (CAS RN 125116-23-6)

3,2 %

31.12.2018

ex 2933 99 80

53

Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) (5)

0 %

31.12.2018

ex 2933 99 80

55

Pyridaben (ISO) (CAS RN 96489-71-3)

0 %

31.12.2014

ex 2933 99 80

57

2-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1)

0 %

31.12.2018

ex 2933 99 80

62

1H-Indole-6-carboxylic acid (CAS RN 1670-82-2)

0 %

31.12.2018

ex 2933 99 80

64

((3R)-1-{(1R,2R)-2-[2-(3,4-Dimethoxyphenyl) ethoxy]cyclohexyl}pyrrolidin-3-ol.hydrochloride, (CAS RN 748810-28-8)

0 %

31.12.2015

ex 2933 99 80

67

Candesartan ethyl ester (INNM) (CAS RN 139481-58-6)

0 %

31.12.2016

ex 2933 99 80

71

10-Methoxyiminostilbene (CAS RN 4698-11-7)

0 %

31.12.2018

ex 2933 99 80

72

1,4,7-Trimethyl-1,4,7-Triazacyclononane

0 %

31.12.2018

ex 2933 99 80

74

Imidazo[1,2-b] pyridazine-hydrochloride (CAS RN 18087-70-2)

0 %

31.12.2018

ex 2933 99 80

76

Manganese(2+), bis(octahydro-1,4,7-trimethyl-1H-1,4,7-triazonine-N1,N4,N7)tri-μ-oxodi-, acetate (1:2) (CAS RN 916075-10-0)

0 %

31.12.2014

ex 2933 99 80

78

3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)

0 %

31.12.2018

ex 2933 99 80

81

1,2,3-Benzotriazole (CAS RN 95-14-7)

0 %

31.12.2016

ex 2933 99 80

82

Tolytriazole (CAS RN 29385-43-1)

0 %

31.12.2018

ex 2933 99 80

88

2,6-Dichloroquinoxaline (CAS RN 18671-97-1)

0 %

31.12.2014

ex 2933 99 80

89

Carbendazim (ISO) (CAS RN 10605-21-7)

0 %

31.12.2018

ex 2934 10 00

10

Hexythiazox (ISO) (CAS RN 78587-05-0)

0 %

31.12.2018

ex 2934 10 00

15

4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3)

0 %

31.12.2017

ex 2934 10 00

20

2-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8)

0 %

31.12.2018

ex 2934 10 00

25

(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)

0 %

31.12.2017

ex 2934 10 00

35

(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)

0 %

31.12.2017

ex 2934 10 00

40

(Z)-2-(2-tert-butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid (CAS RN 86978-24-7)

0 %

31.12.2018

ex 2934 10 00

60

Fosthiazate (ISO) (CAS RN 98886-44-3)

0 %

31.12.2014

ex 2934 10 00

70

2-(Formylamino)-4-thiazoleacetyl chloride, hydrochloride (CAS RN 372092-18-7)

0 %

31.12.2016

ex 2934 10 00

80

3,4-Dichloro-5-carboxyisothiazole (CAS RN 18480-53-0)

0 %

31.12.2016

ex 2934 20 80

20

S-1,3-Benzothiazol-2-yl (2Z)-(5-amino-1,2,4-thiadiazol-3-yl)(methoxyimino)ethanethioate (CAS RN 89604-91-1)

0 %

31.12.2016

ex 2934 20 80

30

2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester (CAS RN 246035-38-1)

0 %

31.12.2016

ex 2934 20 80

40

1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5)

0 %

31.12.2017

ex 2934 20 80

50

S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, (CAS RN 104797-47-9)

0 %

31.12.2018

ex 2934 20 80

60

Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)

0 %

31.12.2015

ex 2934 20 80

70

N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)

0 %

31.12.2015

ex 2934 30 90

10

2-Methylthiophenothiazine (CAS RN 7643-08-5)

0 %

31.12.2017

ex 2934 99 90

11

Methyl 3-{1,4-dioxaspiro[4.5]dec-8-yl[(trans-4-methylcyclohexyl)carbonyl]amino}-5-iodothiophene-2-carboxylate (CAS RN 1026785-65-8)

0 %

31.12.2018

ex 2934 99 90

12

Dimethomorph (ISO) (CAS RN 110488-70-5)

0 %

31.12.2018

ex 2934 99 90

13

Buprofezin (ISO) of a purity by weight of 98,5 % or more (CAS RN 953030-84-7)

0 %

31.12.2018

ex 2934 99 90

14

Ethyl N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-2-yl-b-alaninate (CAS RN 872728-84-2)

0 %

31.12.2017

ex 2934 99 90

15

Carboxin (ISO) (CAS RN 5234-68-4)

0 %

31.12.2018

ex 2934 99 90

17

Methyl(1,8-diethyl-1,3,4,9-tetrahydropyrano[3,4-b]indol-1-yl)acetate (CAS RN 122188-02-7)

0 %

31.12.2016

ex 2934 99 90

18

3,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0)

0 %

31.12.2017

ex 2934 99 90

20

Thiophene (CAS RN 110-02-1)

0 %

31.12.2014

ex 2934 99 90

22

7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1)

0 %

31.12.2017

ex 2934 99 90

23

Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)

0 %

31.12.2016

ex 2934 99 90

25

2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)

0 %

31.12.2015

ex 2934 99 90

28

11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4)

0 %

31.12.2016

ex 2934 99 90

30

Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)

0 %

31.12.2014

ex 2934 99 90

33

[2,2′-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)

0 %

31.12.2016

ex 2934 99 90

35

Dimethenamide (ISO) (CAS RN 87674-68-8)

0 %

31.12.2018

ex 2934 99 90

37

4-Propan-2-ylmorpholine (CAS RN 1004-14-4)

0 %

31.12.2017

ex 2934 99 90

40

2-Thiophene ethylamine (CAS RN 30433-91-1)

0 %

31.12.2015

ex 2934 99 90

43

Clopidogrel acid hydrochloride (CAS RN 144750-42-5)

0 %

31.12.2016

ex 2934 99 90

45

Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione (CAS RN 2451-62-9)

0 %

31.12.2018

ex 2934 99 90

48

Propan-2-ol – 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9)

0 %

31.12.2016

ex 2934 99 90

50

10-[1,1′-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate, (CAS RN 591773-92-1)

0 %

31.12.2015

ex 2934 99 90

55

Olmesartan medoxomil (INN) (CAS RN 144689-63-4)

0 %

31.12.2018

ex 2934 99 90

60

DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3)

0 %

31.12.2018

ex 2934 99 90

66

Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)

0 %

31.12.2018

ex 2934 99 90

72

1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione (CAS RN 1672-88-4)

0 %

31.12.2018

ex 2934 99 90

74

2-Isopropylthioxanthone (CAS RN 5495-84-1)

0 %

31.12.2017

ex 2934 99 90

75

(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1)

0 %

31.12.2016

ex 2934 99 90

ex 3204 20 00

76

10

2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)

0 %

31.12.2016

ex 2934 99 90

77

Potassium 5-methyl-1,3,4-oxadiazole-2-carboxylate (CAS RN 888504-28-7)

0 %

31.12.2016

ex 2934 99 90

79

Thiophen-2-ethanol (CAS RN 5402-55-1)

0 %

31.12.2018

ex 2934 99 90

83

Flumioxazin (ISO) of a purity by weight of 96 % or more (CAS RN 103361-09-7)

0 %

31.12.2014

ex 2934 99 90

84

Etoxazole (ISO) of a purity by weight of 94,8 % or more (CAS RN 153233-91-1)

0 %

31.12.2014

ex 2934 99 90

85

N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride (CAS RN 126586-91-2)

0 %

31.12.2015

ex 2934 99 90

86

Dithianon (ISO) (CAS RN 3347-22-6)

0 %

31.12.2015

ex 2934 99 90

87

2,2′-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)

0 %

31.12.2015

ex 2935 00 90

15

Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5)

0 %

31.12.2018

ex 2935 00 90

17

6-Methyl-4-oxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-2-sulfonamide (CAS RN 120279-88-1)

0 %

31.12.2018

ex 2935 00 90

20

Toluenesulphonamides

0 %

31.12.2018

ex 2935 00 90

23

N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4)

0 %

31.12.2016

ex 2935 00 90

25

Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7)

0 %

31.12.2018

ex 2935 00 90

27

Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)

0 %

31.12.2016

ex 2935 00 90

28

N-Fluorobenzenesulphonimide (CAS RN 133745-75-2)

0 %

31.12.2018

ex 2935 00 90

30

Mixture of isomers consisting of N-ethyltoluene-2-sulphonamide and N-ethyltoluene-4-sulphonamide

0 %

31.12.2014

ex 2935 00 90

35

Chlorsulfuron (ISO) (CAS RN 64902-72-3)

0 %

31.12.2018

ex 2935 00 90

40

Imazosulfuron (ISO), of a purity by weight of 98 % or more (CAS RN 122548-33-8)

0 %

31.12.2015

ex 2935 00 90

42

Penoxsulam (ISO) (CAS RN 219714-96-2)

0 %

31.12.2015

ex 2935 00 90

45

Rimsulfuron (ISO) (CAS RN 122931-48-0)

0 %

31.12.2018

ex 2935 00 90

48

(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid – 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4)

0 %

31.12.2016

ex 2935 00 90

50

4,4′-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3)

0 %

31.12.2018

ex 2935 00 90

53

2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)

0 %

31.12.2014

ex 2935 00 90

55

Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)

0 %

31.12.2018

ex 2935 00 90

63

Nicosulphuron (ISO), of a purity by weight of 91 % or more (CAS RN 111991-09-4)

0 %

31.12.2014

ex 2935 00 90

65

Tribenuron-methyl (ISO) (CAS RN 101200-48-0)

0 %

31.12.2018

ex 2935 00 90

75

Metsulfuron-methyl (ISO) (CAS RN 74223-64-6)

0 %

31.12.2018

ex 2935 00 90

77

[[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1H-pyrrol-1-yl)carbonyl]amino] ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7)

0 %

31.12.2014

ex 2935 00 90

82

N-(5,7-Dimethoxy[1,2,4]triazolo[1,5-a]pyrimidin-2-yl)-2-methoxy-4-(trifluoromethyl)pyridine-3-sulphonamide, (CAS RN 422556-08-9)

0 %

31.12.2014

ex 2935 00 90

85

N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride

0 %

31.12.2018

ex 2935 00 90

88

N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate, (CAS RN 25646-71-3)

0 %

31.12.2018

ex 2935 00 90

89

3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)

0 %

31.12.2016

ex 2938 90 30

10

Ammonium glycyrrhizate (CAS RN 53956-04-0)

0 %

31.12.2015

ex 2938 90 90

10

Hesperidin (CAS RN 520-26-3)

0 %

31.12.2018

ex 2938 90 90

20

Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0)

0 %

31.12.2018

ex 2941 20 30

10

Dihydrostreptomycin sulphate (CAS RN 5490-27-7)

0 %

31.12.2016

ex 3102 50 00

10

Natural sodium nitrate

0 %

31.12.2017

3201 20 00

 

Wattle extract

0 %

31.12.2018

ex 3201 90 90

20

Tanning extracts derived from gambier and myrobalan fruits

0 %

31.12.2018

ex 3204 11 00

20

Dye C.I. Disperse Yellow 241 (CAS RN 83249-52-9), with a purity of 97 % or more as determined by high pressure liquid chromatography

0 %

31.12.2015

ex 3204 11 00

30

Preparation of dispersion dyes, containing:

—

C.I. Disperse Orange 61,

—

C.I. Disperse Blue 291:1,

—

C.I. Disperse Violet 93:1,

—

C.I. Disperse Red 54

0 %

31.12.2015

ex 3204 11 00

40

Dye C.I. Disperse Red 60 (CAS RN 17418-58-5)

0 %

31.12.2016

ex 3204 11 00

50

Dye C.I. Disperse Blue 72 (CAS RN 81-48-1)

0 %

31.12.2016

ex 3204 11 00

60

Dye C.I. Disperse Blue 359 (CAS RN 213328-78-0)

0 %

31.12.2016

ex 3204 11 00

70

Dye C.I. Disperse Red 343 (CAS RN 99035-78-6)

0 %

31.12.2017

ex 3204 11 00

80

Dye preparation, non-ionogenic, containing:

—

N-[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- 2-oxo-2-(phenylmethoxy)ethyl-β-alanine (CAS RN 159010-67-0)

—

N-[4-[(2-cyano-4-nitrophenyl)azo]phenyl]-N-methyl-2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethyl-β-alanine (CAS RN 170222-39-6) and

—

N-[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethoxy]-2-oxoethyl-β-alanine (CAS RN 371921-34-5)

0 %

31.12.2017

ex 3204 12 00

10

Dye C.I. Acid Blue 9 (CAS RN 3844-45-9)

0 %

31.12.2016

ex 3204 12 00

20

Dye preparation, anionic, containing by weight 75 % or more of disodium-7-((4-chloro-6-(dodecylamino)-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-naphthalenesulfonate (CAS RN 145703-76-0)

0 %

31.12.2017

ex 3204 12 00

30

Acid dye preparation, anionic, containing:

—

lithium-amino-4-(4-tert-butylanilino)anthraquinone-2-sulfonate (CAS RN 125328-86-1),

—

C.I. Acid Green 25 (CAS RN 4403-90-1) and

—

C.I. Acid Blue 80 (CAS RN 4474-24-2)

0 %

31.12.2017

ex 3204 12 00

40

Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0)

0 %

31.12.2018

ex 3204 13 00

10

Dye C.I. Basic Red 1 (CAS RN 989-38-8)

0 %

31.12.2016

ex 3204 13 00

20

(2,2′-(3,3′-Dioxidobiphenyl-4,4′-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate (CAS RN 159604-94-1)

0 %

31.12.2017

ex 3204 13 00

30

Dye C.I. Basic Blue 7 (CAS RN 2390-60-5)

0 %

31.12.2017

ex 3204 13 00

40

Dye C.I. Basic Violet 1 (CAS RN 603-47-4)/(CAS RN 8004-87-3)

0 %

31.12.2017

ex 3204 15 00

10

Dye C.I. Vat Orange 7 (C.I. Pigment Orange 43) (CAS RN 4424-06-0)

0 %

31.12.2017

ex 3204 15 00

60

Dyestuff C.I. Vat Blue 4 (CAS RN 81-77-6)

0 %

31.12.2018

ex 3204 17 00

10

Dye C.I. Pigment Yellow 81 (CAS RN 22094-93-5)

0 %

31.12.2018

ex 3204 17 00

15

Dye C.I. Pigment Green 7 (CAS RN 1328-53-6)

0 %

31.12.2016

ex 3204 17 00

20

Dye C.I. Pigment Blue 15:3 (CAS RN 147-14-8)

0 %

31.12.2016

ex 3204 17 00

25

Dye C.I. Pigment Yellow 14 (CAS RN 5468-75-7)

0 %

31.12.2016

ex 3204 17 00

30

Dye C.I. Pigment Yellow 97 (CAS RN 12225-18-2)

0 %

31.12.2017

ex 3204 17 00

35

Dye C.I. Pigment Red 202 (CAS RN 3089-17-6)

0 %

31.12.2016

ex 3204 17 00

40

Dye C.I. Pigment Yellow 120 (CAS RN 29920-31-8)

0 %

31.12.2014

ex 3204 17 00

50

Dye C.I. Pigment Yellow 180 (CAS RN 77804-81-0)

0 %

31.12.2014

ex 3204 17 00

60

Dye C.I. Pigment Red 53:1 (CAS RN 5160-02-1)

0 %

31.12.2016

ex 3204 17 00

65

Dye C.I. Pigment Red 53 (CAS RN 2092-56-0)

0 %

31.12.2016

ex 3204 17 00

70

Dye C.I. Pigment Yellow 13 (CAS RN 5102-83-0)

0 %

31.12.2016

ex 3204 17 00

75

Dye C.I. Pigment Orange 5 (CAS RN 3468-63-1)

0 %

31.12.2017

ex 3204 17 00

80

Dye C.I. Pigment Red 207 (CAS RN 71819-77-7)

0 %

31.12.2017

ex 3204 17 00

85

Dye C.I. Pigment Blue 61 (CAS RN 1324-76-1)

0 %

31.12.2017

ex 3204 17 00

88

Dye C.I. Pigment Violet 3 (CAS RN 1325-82-2)

0 %

31.12.2017

ex 3204 19 00

11

Photochromic dye, 3-(4-butoxyphenyl-6,7-dimethoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile

0 %

31.12.2014

ex 3204 19 00

21

Photochromic dye, 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-7-yl)morpholine (CAS RN 1021540-64-6)

0 %

31.12.2014

ex 3204 19 00

31

Photochromic dye, N-hexyl -6,7-dimethoxy-3,3-bis(4-methoxyphenyl)-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carboxamide

0 %

31.12.2014

ex 3204 19 00

41

Photochromic dye, 4,4′-(13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-3,3-diyl)diphenol

0 %

31.12.2014

ex 3204 19 00

43

Photochromic dye, bis(2-(4-(7-methoxy-3-(4-methoxyphenyl)-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenoxy)ethyl) decanedioate (CUS 0133724-2) (5)

0 %

31.12.2018

ex 3204 19 00

47

Photochromic dye, 4-(4-(13,13-dimethyl-3,11-diphenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl)morpholine (CUS 0133726-4) (5)

0 %

31.12.2018

ex 3204 19 00

51

Photochromic dye, 4-(4-(6,11-difluoro-13,13-dimethyl-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f ]chromen-3-yl)phenyl)morpholine (CAS RN 1360882-72-6)

0 %

31.12.2014

ex 3204 19 00

53

Photochromic dye, 3-(4-butoxyphenyl)-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile (CUS 0133725-3) (5)

0 %

31.12.2018

ex 3204 19 00

55

Photochromic dye, 4, 4′-(7-methoxy-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2, 1-f]chromene-3, 3-diyl)diphenol (CUS 0133728-6) (5)

0 %

31.12.2018

ex 3204 19 00

57

Photochromic dye, bis(2-{4-[11-cyano-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl]phenoxy}ethyl) decanedioate (CUS 0133729-7) (5)

0 %

31.12.2018

ex 3204 19 00

61

Photochromic dye, 3-(4-butoxyphenyl)-6,7-dimethoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f ]chromene (CAS RN 1021540-61-3)

0 %

31.12.2014

ex 3204 19 00

63

Photochromic dye, 1-{4-(6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl}piperidine (CUS 0133727-5) (5)

0 %

31.12.2018

ex 3204 19 00

70

Dye C.I. Solvent Red 49 (CAS RN 509-34-2)

0 %

31.12.2018

ex 3204 19 00

71

Dye C.I. Solvent Brown 53 (CAS RN 64696-98-6)

0 %

31.12.2015

ex 3204 19 00

73

Dye C.I. Solvent Blue 104 (CAS RN 116-75-6) with a purity of 97 % or more determined by high pressure liquid chromatography

0 %

31.12.2015

ex 3204 19 00

77

Dye C.I. Solvent Yellow 98 (CAS RN 27870-92-4)

0 %

31.12.2016

ex 3204 19 00

84

Dye C.I. Solvent Blue 67 (CAS RN 12226-78-7)

0 %

31.12.2017

ex 3204 19 00

85

Dye C.I. Solvent Red HPR

0 %

31.12.2017

ex 3204 20 00

20

Dye C.I. Fluorescent Brightener 71 (CAS RN 16090-02-1)

0 %

31.12.2016

ex 3204 20 00

30

Dye C.I. Fluorescent Brightener 351 (CAS RN 38775-22-3)

0 %

31.12.2016

ex 3204 20 00

40

Disodium 5-[[4-anilino-6-[2-hydroxyethyl(methyl)amino]-1,3,5-triazin-2-yl]amino]-2-[(E)-2-[4-[[4-anilino-6-[2-hydroxyethyl(methyl)amino]-1,3,5-triazin-2-yl]amino]-2-sulfonatophenyl]ethenyl]benzenesulphonate (CAS RN 13863-31-5)

0 %

31.12.2018

ex 3205 00 00

10

Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry (1)

0 %

31.12.2018

ex 3205 00 00

20

Dye C.I. Carbon Black 7 Lake

0 %

31.12.2016

ex 3206 11 00

10

Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate

0 %

31.12.2018

ex 3206 19 00

10

Preparation containing by weight:

—

72 % (± 2 %) of mica (CAS RN 12001-26-2) and

—

28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)

0 %

31.12.2016

ex 3206 42 00

10

Lithopone (CAS RN 1345-05-7)

0 %

31.12.2018

3206 50 00

 

Inorganic products of a kind used as luminophores

0 %

31.12.2018

ex 3207 30 00

10

Preparation containing:

—

not more than 85 % by weight of silver,

—

not less than 2 % by weight of palladium,

—

barium titanate,

—

terpineol, and

—

ethyl cellulose,

used for screen printing in the manufacture of multilayer ceramic capacitors (1)

0 %

31.12.2018

ex 3207 40 85

20

Glass flakes coated with silver, of an average diameter of 40 (± 10) μm

0 %

31.12.2018

ex 3207 40 85

40

Glass flakes (CAS RN 65997-17-3):

—

of a thickness of 0,3 μm or more but not more than 10 μm, and

—

coated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)

0 %

31.12.2017

ex 3208 10 90

ex 3707 90 90

10

60

Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10 % of polymer

0 %

31.12.2018

ex 3208 20 10

10

Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer

0 %

31.12.2018

ex 3208 20 10

20

Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether

0 %

31.12.2018

ex 3208 90 19

10

Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol

0 %

31.12.2018

ex 3208 90 19

ex 3902 90 90

15

94

Modified, chlorinated polyolefins, whether or not in a solution or dispersion

0 %

31.12.2018

ex 3208 90 19

ex 3208 90 91

25

20

Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight

0 %

31.12.2017

ex 3208 90 19

35

Silicones containing 50 % by weight or more of xylene of a kind used for the manufacture of long term surgical implants

0 %

31.12.2018

ex 3208 90 19

40

Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane

0 %

31.12.2018

ex 3208 90 19

50

Solution containing by weight:

—

(65 ± 10) % of γ-butyrolactone,

—

(30 ± 10) % of polyamide resin,

—

(3,5 ± 1,5) % of naphthoquinone ester derivative and

—

(1,5 ± 0,5) % of arylsilicic acid

0 %

31.12.2018

ex 3208 90 19

60

Copolymer of hydroxystyrene with one or more of the following:

—

styrene

—

alkoxystyrene

—

alkylacrylates

dissolved in ethyl lactate

0 %

31.12.2016

ex 3208 90 19

75

Acenaphthalene copolymer in ethyl lactate solution

0 %

31.12.2017

ex 3208 90 99

10

Solution based on chemically modified natural polymers, containing two or more of the following dyes:

—

methyl 8′-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3′-naphtho[2,1-b][1,4]oxazine]-9′-carboxylate,

—

methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

—

13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol,

—

ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate,

—

13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol

0 %

31.12.2018

ex 3215 11 00

ex 3215 19 00

10

10

Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13 % of vinyl acrylate copolymer and colour pigments

0 %

31.12.2018

ex 3215 19 00

20

Ink:

—

consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),

—

with a total solid content by weight of 55 % or more, but not more than 57 %, and

—

with a specific gravity of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,

used to imprint electrodes (1)

0 %

31.12.2017

ex 3215 90 00

10

Ink formulation, for use in the manufacture of ink-jet cartridges (1)

0 %

31.12.2018

ex 3215 90 00

20

Heat sensitive ink fixed on a plastic film

0 %

31.12.2018

ex 3215 90 00

30

Disposable cartridge ink, containing by weight:

—

5 % or more, but not more than 10 % of amorphous silicon dioxide or

—

3,8 % or more of dye C.I. Solvent Black 7 in organic solvents

for use in the marking of integrated circuits (1)

0 %

31.12.2018

ex 3215 90 00

40

Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:

—

wax;

—

a vinyl-based polymer and

—

a colouring agent

for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices (1)

0 %

31.12.2015

3301 12 10

 

Essential oil of orange, not deterpenated

0 %

31.12.2018

ex 3402 11 90

10

Sodium lauroyl methyl isethionate

0 %

31.12.2015

ex 3402 13 00

10

Vinyl copolymer surface active agent based on polypropylene glycol

0 %

31.12.2018

ex 3402 13 00

20

Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated

0 %

31.12.2017

ex 3402 13 00

30

Polyoxyethylated-12-hydroxystearic acid (CAS RN 70142–34–6)

0 %

31.12.2018

ex 3402 90 10

20

Mixture of docusate sodium (INN) and sodium benzoate

0 %

31.12.2018

ex 3402 90 10

30

Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7 and 9014-85-1)

0 %

31.12.2015

ex 3402 90 10

50

Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol)

0 %

31.12.2015

ex 3402 90 10

60

Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane

0 %

31.12.2014

ex 3402 90 10

70

Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1)

0 %

31.12.2014

ex 3403 99 00

10

Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides

0 %

31.12.2018

ex 3504 00 90

10

Avidin (CAS RN 1405-69-2)

0 %

31.12.2014

ex 3505 10 50

20

O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch (CAS RN 9005-27-0)

0 %

31.12.2018

ex 3506 91 00

10

Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)

0 %

31.12.2018

ex 3506 91 00

30

Two component microencapsulated epoxy adhesive dispersed in a solvent

0 %

31.12.2018

ex 3506 91 00

40

Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)

0 %

31.12.2014

ex 3601 00 00

10

Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators (1)

0 %

31.12.2016

ex 3701 30 00

10

Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,2 mm or more but not more than 0,8 mm, not covered with a release film, of a total thickness of not more than 1 mm

0 %

31.12.2018

ex 3701 30 00

20

Photosensitive plate consisting of a photopolymer layer on a polyester foil of a total thickness of more than 0,43 mm but not more than 3,18 mm

0 %

31.12.2014

ex 3701 99 00

10

Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, ofa kind used forgoods of heading 8541 or 8542

0 %

01.07.2014

ex 3705 90 90

10

Photomasks for photographically transferring circuit diagram patterns onto semiconductor wafers

0 %

31.12.2014

ex 3707 10 00

10

Photosensitive emulsion for the sensitization of silicon discs (1)

0 %

31.12.2018

ex 3707 10 00

15

Sensitising emulsion consisting of:

—

by weight not more than 12 % of diazooxonapthtalenesulphonic acid ester

—

phenolic resins

in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone

0 %

31.12.2018

ex 3707 10 00

25

Sensitising emulsion containing:

—

phenolic or acrylic resins

—

a maximum 2 % by weight of light sensitive acid precursor,

in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate

0 %

31.12.2018

ex 3707 10 00

30

Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate

0 %

31.12.2018

ex 3707 10 00

ex 3707 90 90

35

70

Sensitising emulsion or preparation containing one or more of:

—

acrylate polymers,

—

methacrylate polymers,

—

derivatives of styrene polymers,

containing by weight not more than 7 % of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate

0 %

31.12.2016

ex 3707 10 00

40

Sensitising emulsion, containing:

—

not more than 10 % by weight of naphthoquinonediazide esters,

—

2 % or more but not more than 20 % by weight of copolymers of hydroxystyrene

—

not more than 7 % by weight of epoxy-containing derivatives

dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate

0 %

31.12.2016

ex 3707 10 00

45

Photosensitive emulsion consisting of cyclized polyisoprene containing:

—

55 % or more but not more than 75 % by weight of xylene and

—

12 % or more but not more than 18 % by weight of ethylbenzene

0 %

31.12.2014

ex 3707 10 00

50

Photosensitive emulsion containing by weight:

—

20 % or more but not more than 45 % of copolymers of acrylates and/or methacrylates and hydroxystyrene derivatives,

—

25 % or more but not more than 50 % of organic solvent containing at least ethyl lactate and/or propylene glycolmethylether acetate,

—

5 % or more but not more than 30 % of acrylates,

—

not more than 12 % of a photoinitiator

0 %

31.12.2014

ex 3707 10 00

55

Dielectric coating, buffering mechanical stress, consisting of a radically photopatternable polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N-ethyl-2-pyrrolidon with a polymer content by weight 10 % or more

0 %

31.12.2018

ex 3707 90 20

10

Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1)

0 %

31.12.2018

ex 3707 90 20

20

Dry ink powder or toner blend, based on a polyol resin, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1)

0 %

31.12.2018

ex 3707 90 20

40

Dry ink powder or toner blend, based on a polyester resin, manufactured by a polymerisation process, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1)

0 %

31.12.2018

ex 3707 90 20

50

Dry ink powder or toner blend, consisting of:

—

styrene acrylate/butadiene copolymer

—

either carbon black or an organic pigment

—

whether or not containing polyolefin or amorphous silica

for use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers (1)

0 %

31.12.2017

ex 3707 90 90

10

Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10 % of polymer, in a solution in two or three of the following substances:

—

2-methoxy-1-methylethyl acetate (CAS RN 108-65-6)

—

1-methoxypropan-2-ol (CAS RN 107-98-2)

—

ethyl lactate (CAS RN 97-64-3)

0 %

31.12.2018

ex 3707 90 90

40

Anti-reflection coating, in the form of an aqueous solution, containing by weight not more than:

—

2 % of halogen-free alkyl sulphonic acid, and

—

5 % of a fluorinated polymer

0 %

31.12.2014

ex 3707 90 90

80

Anti-reflection coating, consisting of either a siloxane polymer or an organic polymer having a phenolic hydroxy group modified with a chromophore group, in the form of a solution of an organic solvent containing either 1-ethoxy-2-propanol or 2-methoxy-1-methylethyl acetate containing by weight not more than 10 % of polymer

0 %

31.12.2015

ex 3707 90 90

85

Rolls, containing:

—

a dry layer of a photosensitive acrylic resin,

—

on one side a poly(ethylene terephthalate) protecting foil and

—

on the other side a polyethylene protecting foil

0 %

31.12.2014

ex 3801 90 00

10

Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6)

0 %

31.12.2016

ex 3802 90 00

11

Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical products (1)

0 %

31.12.2017

3805 90 10

 

Pine oil

1,7 %

31.12.2018

ex 3806 10 00

ex 3909 40 00

20

50

Rosin modified phenolic resin,

—

containing 60 % or more but not more than 75 % by weight of rosin,

—

with an acid value of not more than 25,

of a kind used in offset printing

0 %

31.12.2016

ex 3808 91 90

10

Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide

0 %

31.12.2018

ex 3808 91 90

30

Preparation containing endospores or spores and protein crystals derived from either:

—

Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or,

—

Bacillus thuringiensis subsp. kurstaki or,

—

Bacillus thuringiensis subsp. israelensis or,

—

Bacillus thuringiensis subsp. aizawai or,

—

Bacillus thuringiensis subsp. tenebrionis

0 %

31.12.2014

ex 3808 91 90

40

Spinosad (ISO)

0 %

31.12.2018

ex 3808 91 90

60

Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3′-ethoxy-5,6-dihydro spinosyn J) and (3′-ethoxy- spinosyn L)

0 %

31.12.2017

ex 3808 92 90

10

Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale

0 %

31.12.2018

ex 3808 92 90

30

Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight:

—

24 % or more but not more than 26 % of pyrithione zinc (INN), or

—

39 % or more but not more than 41 % of pyrithione zinc (INN)

0 %

31.12.2018

ex 3808 92 90

50

Preparations based on copper pyrithione (CAS RN 14915-37-8)

0 %

31.12.2014

ex 3808 93 15

10

Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension

0 %

31.12.2017

ex 3808 93 23

10

Herbicide containing flazasulfuron (ISO) as an active ingredient

0 %

31.12.2014

ex 3808 93 27

40

Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight:

—

30 % or more of tepraloxydim (ISO) and

—

not more than 70 % of a petroleum fraction consisting of aromatic hydrocarbons

0 %

31.12.2016

ex 3808 93 90

10

Preparation, in the form of granules, containing by weight:

—

38,8 % or more but not more than 41,2 % of Gibberellin A3, or

—

9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7

0 %

31.12.2014

ex 3808 93 90

20

Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:

—

1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine

of a kind used in plant growth regulators

0 %

31.12.2015

ex 3808 93 90

30

Aqueous solution containing by weight:

—

1,8 % of sodium para-nitrophenolate,

—

1,2 % of sodium ortho-nitrophenolate,

—

0,6 % of sodium 5-nitroguaiacolate

for use in the manufacture of a plant growth regulator (1)

0 %

31.12.2015

ex 3808 93 90

40

Mixed white powder containing by weight:

—

3 % or more but not more than 3,6 % of 1-methylcyclopropene with a purity more than 96 % and

—

containing less than 0,05 % of each impurity of 1-chloro-2-methylpropene and 3-chloro-2-methylpropene

for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator (1)

0 %

31.12.2015

ex 3808 93 90

50

Preparation in the form of powder, containing by weight:

—

55 % or more of Gibberellin A4,

—

1 % or more but not more than 35 % of Gibberellin A7,

—

90 % or more of Gibberellin A4 and Gibberellin A7 combined

—

not more than 10 % of a combination of water and other naturally occurring Gibberellins

of a kind used in plant growth regulators

0 %

31.12.2015

ex 3808 99 90

10

Oxamyl (ISO) (CAS RN 23135-22-0) in a solution of cyclohexanone and water

0 %

31.12.2015

ex 3808 99 90

20

Abamectin (ISO) (CAS RN 71751-41-2)

0 %

31.12.2018

ex 3809 91 00

10

Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl) methylphosphonate

0 %

31.12.2018

ex 3809 92 00

20

Defoamer, consisting of a mixture of oxydipropanol and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol

0 %

31.12.2014

ex 3810 10 00

10

Soldering or welding paste, consisting of a mixture of metals and resin containing by weight:

—

70 % or more, but not more than 90 % of tin

—

not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium

for use in the electro technical industry (1)

0 %

31.12.2018

ex 3811 19 00

10

Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:

—

4,9 % of 1,2,4-trimethyl-benzene,

—

4,9 % of naphthalene, and

—

0,5 % of 1,3,5-trimethyl-benzene

0 %

31.12.2014

ex 3811 21 00

10

Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils

0 %

31.12.2018

ex 3811 21 00

20

Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil

0 %

31.12.2018

ex 3811 21 00

30

Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

31.12.2017

ex 3811 21 00

40

Additives for lubricating oils, containing mineral oils, based on a mixture of dodecylphenol sulphide calcium salts (CAS RN 68784-26-9), used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

31.12.2017

ex 3811 21 00

50

Additives for lubricating oils,

—

based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),

—

containing mineral oils,

used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

31.12.2017

ex 3811 21 00

60

Additives for lubricating oils, containing mineral oils,

—

based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,

—

with a total base number (TBN) of 280 or more but not more than 320,

used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

31.12.2017

ex 3811 21 00

70

Additives for lubricating oils,

—

containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

—

containing mineral oils,

—

with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,

—

with a total base number (TBN) of more than 20,

used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

31.12.2017

ex 3811 29 00

20

Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

31.12.2017

ex 3811 29 00

30

Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

31.12.2017

ex 3811 29 00

40

Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,05 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

31.12.2017

ex 3811 29 00

50

Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process

0 %

31.12.2017

ex 3811 90 00

10

Dinonylnaphthylsulphonic acid salt, in a mineral oil solution

0 %

31.12.2018

ex 3811 90 00

40

Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % 2-ethylhexanol

0 %

31.12.2017

ex 3812 10 00

10

Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7)

0 %

31.12.2016

ex 3812 20 90

10

Plasticizer, containing:

—

bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2)

—

more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)

0 %

31.12.2018

ex 3812 30 80

20

Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate

0 %

31.12.2018

ex 3812 30 80

25

UV photo stabiliser containing:

—

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2);

—

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1);

—

polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3)

—

bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), and

—

methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)

0 %

31.12.2018

ex 3812 30 80

30

Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol

0 %

31.12.2014

ex 3812 30 80

35

Mixture containing by weight:

—

25 % or more but not more than 50 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9)

—

not more than 20 % of other organic compounds

—

on a carrier of polypropylene (CAS RN 9003-07-0)

0 %

31.12.2018

ex 3812 30 80

40

Mixture of:

—

80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate, and

—

20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate

0 %

31.12.2018

ex 3812 30 80

55

UV-stabilizer, containing:

—

2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) and

—

either N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or

—

N,N′-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)

0 %

31.12.2016

ex 3812 30 80

60

Light stabiliser, consisting of branched and linear alkyl esters of 3-(2H-Benzotriazolyl)-5-(1,1-di-methylethyl)-4-hydroxy-benzenepropanoic acid (CAS RN 127519-17-9)

0 %

31.12.2016

ex 3812 30 80

65

Stabiliser for plastic material containing:

—

2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),

—

2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and

—

2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)

0 %

31.12.2016

ex 3812 30 80

70

Light stabiliser containing:

—

branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and

—

1-methoxy-2-propyl acetate (CAS RN 108-65-6)

0 %

31.12.2016

ex 3812 30 80

75

N,N′-Bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7)

0 %

31.12.2017

ex 3812 30 80

80

UV-stabilizer, consisting of:

—

a hindered amine: N,N′-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and

—

either an o-hydroxyphenyl triazine UV light absorber or

—

a chemically modified phenolic compound

0 %

31.12.2017

ex 3814 00 90

20

Mixture containing by weight:

—

69 % or more but not more than 71 % of 1-methoxypropan-2-ol,

—

29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate

0 %

31.12.2018

ex 3814 00 90

40

Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether

0 %

31.12.2018

ex 3815 12 00

10

Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver

0 %

31.12.2018

ex 3815 19 90

10

Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)

0 %

31.12.2016

ex 3815 19 90

15

Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile (1)

0 %

31.12.2018

ex 3815 19 90

25

Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde (1)

0 %

31.12.2018

ex 3815 19 90

30

Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene (1)

0 %

31.12.2018

ex 3815 19 90

40

Catalyst, in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metals oxides containing predominantly oxides of molybdenum, vanadium and copper, on a support of silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid (1)

0 %

31.12.2018

ex 3815 19 90

60

Catalyst consisting of dichromium trioxide, fixed on a support of aluminium oxide

0 %

31.12.2014

ex 3815 19 90

65

Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide

0 %

31.12.2018

ex 3815 19 90

70

Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide

0 %

31.12.2018

ex 3815 19 90

75

Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide

0 %

31.12.2018

ex 3815 19 90

80

Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil

0 %

31.12.2018

ex 3815 19 90

85

Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder

0 %

31.12.2018

ex 3815 19 90

86

Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins (1)

0 %

31.12.2018

ex 3815 19 90

ex 8506 90 00

87

10

Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) (1)

0 %

31.12.2016

ex 3815 90 90

16

Initiator based on dimethylaminopropyl urea

0 %

31.12.2017

ex 3815 90 90

18

Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO′)-, di[chloride(1-)], used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3)

0 %

31.12.2017

ex 3815 90 90

20

Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight:

—

20 % or more but not more than 30 % of titanium and

—

55 % or more but not more than 72 % of chlorine

0 %

31.12.2018

ex 3815 90 90

27

Catalyst, in the form of hollow cylinders with a length of 5 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, bismuth, iron and nickel, containing also a charge of silicon dioxide, for use in the manufacture of acrylic acid (1)

0 %

31.12.2018

ex 3815 90 90

30

Catalyst, consisting of a suspension in mineral oil of:

—

tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride; and

—

silicon dioxide

—

containing 6,6 % (± 0,6 %) by weight of magnesium, and

—

containing 2,3 % (± 0,2 %) by weight of titanium

0 %

31.12.2015

ex 3815 90 90

33

Catalyst, consisting of a mixture of different alkylnaphthalene sulphonic acids, with aliphatic hydrocarbon chains, containing 12 – 56 carbon atoms

0 %

31.12.2018

ex 3815 90 90

50

Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium

0 %

31.12.2018

ex 3815 90 90

70

Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols

0 %

31.12.2014

ex 3815 90 90

71

Catalyst, containing N-(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2-ethyl hexanoate, dissolved in ethane-1,2-diol

0 %

31.12.2016

ex 3815 90 90

80

Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol

0 %

31.12.2014

ex 3815 90 90

81

Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate

0 %

31.12.2018

ex 3815 90 90

85

Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins (1)

0 %

31.12.2017

ex 3815 90 90

86

Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide

0 %

31.12.2018

ex 3815 90 90

88

Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:

—

4 % or more but not more than 10 % of titanium and

—

10 % or more but not more than 20 % magnesium

0 %

31.12.2018

ex 3815 90 90

89

Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1)

0 %

31.12.2016

ex 3817 00 50

10

Mixture of alkylbenzenes (C14-26) containing by weight:

—

35 % or more but not more than 60 % of eicosylbenzene,

—

25 % or more but not more than 50 % of docosylbenzene,

—

5 % or more but not more than 25 % of tetracosylbenzene

0 %

31.12.2018

ex 3817 00 80

10

Mixture of alkylnaphthalenes, containing by weight:

—

88 % or more but not more than 98 % of hexadecylnaphthalene

—

2 % or more but not more than 12 % of dihexadecylnaphthalene

0 %

31.12.2018

ex 3817 00 80

20

Mixture of branched alkyl benzenes mainly containing dodecyl benzenes

0 %

31.12.2018

ex 3817 00 80

30

Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms

0 %

31.12.2016

ex 3819 00 00

20

Fire resistant hydraulic fluid based on phosphate ester

0 %

31.12.2018

ex 3823 19 30

20

Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of:

—

industrial monocarboxylic fatty acids of subheading 3823,

—

stearic acid of subheading 3823,

—

stearic acid of subheading 2915,

—

palmitic acid of subheading 2915, or

—

animal feed preparations of subheading 2309 (1)

0 %

31.12.2018

ex 3823 19 90

20

Palm acid oils from refining for use in the manufacture of:

—

industrial monocarboxylic fatty acids of subheading 3823

—

stearic acid of subheading 3823

—

stearic acid of subheading 2915

—

palmitic acid of subheading 2915

—

animal feed preparations of subheading 2309 (1)

0 %

31.12.2018

ex 3824 90 15

10

Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets

0 %

31.12.2018

ex 3824 90 97

05

Mixture of methylmethacrylate monomer and butylacrylate monomer in a solution of xylene and butylacetate, containing by weight more than 54 % but not more than 56 % of solvents

0 %

31.12.2014

ex 3824 90 97

06

Paraffin with a level of chlorination of 70 % or more

0 %

31.12.2014

ex 3824 90 97

07

Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material

0 %

31.12.2014

ex 3824 90 97

08

Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)

0 %

31.12.2014

ex 3824 90 97

09

Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:

—

on a support of mineral wax, whether or not modified chemically, or

—

in the form of a solution in an organic solvent

0 %

31.12.2018

ex 3824 90 97

10

Calcined bauxite (refractory grade)

0 %

31.12.2018

ex 3824 90 97

11

Mixture of phytosterols, not in powder form, containing by weight:

—

40 % or more but not more than 58 % of beta-sitosterols

—

20 % or more but not more than 28 % of campesterols

—

14 % or more but not more than 23 % of stigmasterols

—

0 % or more but not more than 15 % of other sterols

0 %

31.12.2014

ex 3824 90 97

12

Oligomer of tetrafluoroethylene, having one iodoethyl end-group

0 %

31.12.2018

ex 3824 90 97

13

Preparations containing not less than 92 % but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate

0 %

31.12.2016

ex 3824 90 97

14

Calcium phosphonate phenate, dissolved in mineral oil

0 %

31.12.2016

ex 3824 90 97

15

Structured silica alumina phosphate

0 %

31.12.2014

ex 3824 90 97

16

Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea

0 %

31.12.2018

ex 3824 90 97

17

Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65 % or more but not more than 90 %

0 %

31.12.2018

ex 3824 90 97

18

Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 515136-48-8)

0 %

31.12.2014

ex 3824 90 97

20

Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:

—

either an aluminium-alkyl compound,

—

or an organic complex of tungsten

—

or an organic complex of molybdenum

0 %

31.12.2018

ex 3824 90 97

21

Mixture of 2-propenoic acid, (1-methylethylidene)bis(4,1-phenyleneoxy-2,1-ethanediyloxy-2,1-ethanediyl)ester with 2-propenoic acid, (2,4,6-trioxo-1,3,5-triazine-1,3,5(2H,4H,6H)-triyl)tri-2,1-ethanediyl ester and 1-hydroxy-cyclohexyl-phenyl ketone in the solution of methyl ethyl ketone and toluene

0 %

31.12.2014

ex 3824 90 97

22

Preparations containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol

0 %

31.12.2016

ex 3824 90 97

23

Mixture of urethane acrylates, tripropylene glycoldiacrylate, ethoxylated bisphenol A acrylate and poly(ethyleneglycol) 400 diacrylate

0 %

31.12.2014

ex 3824 90 97

24

Solution of (chloromethyl)bis(4-fluorophenyl)methylsilane of a nominal concentration of 65 % in toluene

0 %

31.12.2015

ex 3824 90 97

26

Aqueous dispersion, containing by weight:

—

76 % (± 0,5 %) of silicon carbide (CAS RN 409-21-2)

—

4,6 % (± 0,05 %) of aluminium oxide (CAS RN 1344-28-1) and

—

2,4 % (± 0,05 %) of yttrium oxide (CAS RN 1314-36-9)

0 %

31.12.2016

ex 3824 90 97

27

Preparation, consisting of a mixture of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and propan-2-ol

0 %

31.12.2015

ex 3824 90 97

28

Preparation containing by weight:

—

85 % or more but not more than 95 % of α-4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy-phenyl-ω-hydroxyhexa(oxyethylene), and

—

5 % or more but not more than 15 % of polyoxyethylene (20) sorbitan monopalmitate

0 %

31.12.2015

ex 3824 90 97

29

Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors (1)

0 %

31.12.2018

ex 3824 90 97

30

2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated

0 %

31.12.2014

ex 3824 90 97

31

Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran

0 %

31.12.2015

ex 3824 90 97

32

Mixture of:

—

basic zirconium carbonate (CAS RN 57219-64-4) and

—

cerium carbonate (CAS RN 537-01-9)

0 %

31.12.2016

ex 3824 90 97

33

Preparation, containing:

—

trioctylphosphine oxide (CAS RN 78-50-2),

—

dioctylhexylphosphine oxide (CAS RN 31160-66-4),

—

octyldihexylphosphine oxide (CAS RN 31160-64-2) and

—

trihexylphosphine oxide (CAS RN 9084-48-8)

0 %

31.12.2016

ex 3824 90 97

35

Mixture of:

—

3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) and

—

ethyl-6′-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9′-[9H]xanthene]-2′-carboxylate (CAS RN 154306-60-2)

0 %

31.12.2017

ex 3824 90 97

36

Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)

0 %

31.12.2017

ex 3824 90 97

37

Liquid crystal mixture for use in the manufacture of displays (1)

0 %

31.12.2017

ex 3824 90 97

38

Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses (1)

0 %

31.12.2017

ex 3824 90 97

39

Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid

0 %

31.12.2018

ex 3824 90 97

40

Azelaic acid of a purity by weight of 75 % or more but not more than 85 %

0 %

31.12.2014

ex 3824 90 97

41

Preparation, consisting of:

—

dipropylene glycol

—

tripropylene glycol

—

tetrapropylene glycol and

—

pentapropylene glycol

0 %

31.12.2017

ex 3824 90 97

42

Mixed metals oxides, in the form of powder, containing by weight:

—

either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,

—

or 30 % or more of lead and 5 % or more of niobium,

for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors (1)

0 %

31.12.2018

ex 3824 90 97

43

Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators

0 %

31.12.2017

ex 3824 90 97

44

Mixture of phytosterols, not in the form of powder, containing by weight:

—

75 % or more of sterols,

—

not more than 25 % of stanols,

for use in the manufacture of stanols/sterols or stanol/sterol esters (1)

0 %

31.12.2017

ex 3824 90 97

45

Preparations consisting predominantly of ethylene glycol and:

—

either diethylene glycol, dodecandioic acid and ammonia water,

—

or N,N-dimethylformamide,

—

or γ-butyrolactone,

—

or silicon oxide,

—

or ammonium hydrogen azelate,

—

or ammonium hydrogen azelate and silicon oxide,

—

or dodecandioic acid, ammonia water and silicon oxide,

for the manufacture of electrolytic capacitors (1)

0 %

31.12.2018

ex 3824 90 97

47

Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:

—

0,1 % or more but not more than 1 % of platinum, and

—

0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)

0 %

31.12.2017

ex 3824 90 97

49

Preparation containing:

—

C,C′-azodi(formamide) (CAS RN 123-77-3),

—

magnesium oxide (CAS RN 1309-48-4) and

—

zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)

in which the gas formation from C,C′-azodi(formamide) occurs at 135 °C

0 %

31.12.2017

ex 3824 90 97

50

Powder mixture containing by weight:

—

85 % or more of zinc diacrylate (CAS RN 14643-87-9)

—

and not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7)

0 %

31.12.2018

ex 3824 90 97

51

Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)

0 %

31.12.2017

ex 3824 90 97

52

Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units

0 %

31.12.2014

ex 3824 90 97

53

Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units

0 %

31.12.2014

ex 3824 90 97

54

2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45 % or more but not more than 55 % of 2-hydroxybenzonitrile

0 %

31.12.2018

ex 3824 90 97

55

Preparation consisting of:

—

50 % (± 2 %) by weight of bis-alkoxylated ethyl acetoacetate aluminium chelates,

—

in an ink oil (white mineral) solvent

with a boiling point of 160 °C or more but not more than 180 °C

0 %

31.12.2018

ex 3824 90 97

56

Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran

0 %

31.12.2018

ex 3824 90 97

58

N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37 %

0 %

31.12.2015

ex 3824 90 97

59

3′,4′,5′-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3′,4′,5′-trifluorobiphenyl-2-amine

0 %

31.12.2015

ex 3824 90 97

60

α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]

0 %

31.12.2018

ex 3824 90 97

62

Fused magnesia containing by weight 15 % or more of dichromium trioxide

0 %

31.12.2016

ex 3824 90 97

64

Aluminium sodium silicate, in the form of spheres of a diameter of:

—

either 1,6mm or more but not more than 3,4mm,

—

or 4mm or more but not more than 6mm

0 %

31.12.2018

ex 3824 90 97

65

Preparation containing by weight:

—

89 % or more but not more than 98,9 % of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol

—

0,1 % or more but not more than 1 % of colorants

—

1 % or more but not more than 10 % of fluoropolymers

0 %

31.12.2016

ex 3824 90 97

66

Mixture of primary tert-alkylamines

0 %

31.12.2014

ex 3824 90 97

78

Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder with a particle size not more than 300 μm, containing by weight:

—

60 % or more, but not more than 80 % of sitosterols,

—

not more than 15 % of campesterols,

—

not more than 5 % of stigmasterols,

—

not more than 15 % of betasitostanols

0 %

31.12.2017

ex 3824 90 97

79

Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine

0 %

31.12.2014

ex 3824 90 97

82

α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]

0 %

31.12.2018

ex 3824 90 97

84

Reaction product, containing by weight:

—

1 % or more but not more than 40 % of molybdenum oxide,

—

10 % or more but not more than 50 % of nickel oxide,

—

30 % or more but not more than 70 % of tungsten oxide

0 %

31.12.2014

ex 3824 90 97

87

Paste containing by weight:

—

75 % or more, but not more than 85 % of copper,

—

inorganic oxides,

—

ethyl cellulose, and

—

a solvent

0 %

31.12.2017

ex 3824 90 97

88

Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1′-oxybis(2-chloroethane)

0 %

31.12.2014

ex 3824 90 97

89

Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups

0 %

31.12.2018

ex 3824 90 97

90

Hollow spheres of fused aluminosilicate containing 65-80 % amorphous aluminosilicate, with the following characteristics:

—

a melting point of between 1 600 °C and 1 800 °C,

—

a density of 0,6 - 0,8 g/cm3,

for use in the manufacture of particle filters in motor vehicles (1)

0 %

31.12.2018

ex 3824 90 97

92

Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide

0 %

31.12.2014

ex 3824 90 97

94

Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)

0 %

31.12.2018

ex 3824 90 97

95

Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols

0 %

31.12.2014

ex 3824 90 97

97

Preparation containing by weight either 10 % or more but not more than 20 % of lithiumfluorophosphate or 5 % or more but not more than 10 % of lithium perchlorate in mixtures of organic solvents

0 %

31.12.2018

ex 3826 00 10

ex 3826 00 10

20

29

Mixture of fatty acid methyl esters containing by weight at least:

—

65 % or more but not more than 75 % of C12 FAME,

—

21 % or more but not more than 28 % of C14 FAME,

—

4 % or more but not more than 8 % of C16 FAME,

for use in the manufacture of detergents and home and personal care products (1)

0 %

31.12.2018

ex 3826 00 10

ex 3826 00 10

30

39

Mixture of fatty acid methyl esters containing by weight at least:

—

50 % or more but not more than 58 % of C8-FAME

—

35 % or more but not more than 50 % of C10-FAME

for use in the manufacture of agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components (1)

0 %

31.12.2018

ex 3826 00 10

ex 3826 00 10

40

49

Mixture of fatty acid methyl esters containing by weight at least:

—

15 % or more but not more than 32 % of C16 FAME

—

65 % or more but not more than 85 % of C18 FAME

for use in the manufacture of detergents and home and personal cleaning products, agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components (1)

0 %

31.12.2018

ex 3901 10 90

20

Polyethylene, in the form of granules, of a specific gravity of 0,925 (± 0,0015), a melt flow index of 0,3 g/10 min (± 0,05 g/10 min), for the manufacture of blown films of a haze value not more than 6 % and an elongation at break (MD/TD) of 210/340 (1)

0 %

31.12.2018

ex 3901 10 90

30

Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper

0 %

31.12.2016

ex 3901 20 90

10

Polyethylene, in one of the forms mentioned in note 6 (b) to Chapter 39, of a specific gravity of 0,945 or more but not more than 0,985, for the manufacture of films for typewriter ribbon or similar ribbon (1)

0 %

31.12.2018

ex 3901 20 90

20

Polyethylene, containing by weight 35 % or more but not more than 45 % of mica

0 %

31.12.2018

ex 3901 30 00

80

Ethylene-vinyl acetate copolymer,

—

containing 27,8 % or more but not more than 29,3 % by weight of vinyl acetate

—

with a melt flow index of 22 g/10 min or more but no more than 28 g/10 min

—

containing not more than 15 mg/kg vinyl acetate monomer

0 %

31.12.2015

ex 3901 30 00

82

Ethylene-vinyl acetate copolymer,

—

containing 9,8 % or more but not more than 10,8 % by weight of vinyl acetate

—

with a melt flow index of 2,5 g/10 min or more but no more than 3,5 g/10 min

—

containing not more than 15 mg/kg vinyl acetate monomer

0 %

31.12.2015

ex 3901 90 90

80

Block copolymer of ethylene with octene in the form of pellets:

—

with a specific gravity of 0,862 or more, but not more than 0,865,

—

able to stretch to at least 200 % its original length,

—

with a hysteresis of 50 % (± 10 %),

—

with permanent deformation of not more than 20 %,

for use in the manufacture of napkin liners for babies (1)

0 %

31.12.2015

ex 3901 90 90

82

Copolymer of ethylene and methacrylic acid

0 %

31.12.2015

ex 3901 90 90

91

Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid

4 %

31.12.2018

ex 3901 90 90

92

Chlorosulphonated polyethylene

0 %

31.12.2018

ex 3901 90 90

93

Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets (1)

0 %

31.12.2018

ex 3901 90 90

94

Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene

0 %

31.12.2018

ex 3901 90 90

97

Chlorinated polyethylene, in the form of powder

0 %

31.12.2018

ex 3902 10 00

10

Polypropylene containing no plasticizer and not more than:

—

7 mg/kg of aluminium,

—

2 mg/kg of iron,

—

1 mg/kg of magnesium,

—

8 mg/kg of chloride

0 %

31.12.2018

ex 3902 10 00

20

Polypropylene, containing no plasticiser,

—

of a melting point of more than 150 °C (as determined by the ASTM D 3 417 method),

—

of a heat of fusion of 15 J/g or more but not more than 70 J/g,

—

of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method),

—

of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)

0 %

31.12.2018

ex 3902 10 00

30

Polypropylene, containing not more than 1 mg/kg of aluminium, 0,05 mg/kg of iron, 1 mg/kg of magnesium and 1 mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses (1)

0 %

31.12.2018

ex 3902 10 00

40

Polypropylene, containing no plasticizer:

—

of a tensile strength: of 32-60 MPa (as determined by the ASTM D638 method);

—

of a flexural strength of 50-90 MPa (as determined by the ASTM D790 method);

—

of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5-15 g/10 min (as determined by the ASTM D1238 method);

—

with 40 % or more but not more than 80 % by weight of polypropylene,

—

with 10 % or more but not more than 30 % by weight of glass fibre,

—

with 10 % or more but not more than 30 % by weight of mica

0 %

31.12.2014

ex 3902 10 00

50

High isotactic polypropylene (HIPP), whether or not coloured, intended for the manufacture of plastic components for air freshener with the following properties:

—

a density of 0,880 g/cm3 or more but not more than 0,913 g/cm3(as determined by test method ASTM D1505),

—

a tensile strength at yield of 350 kg/cm2 or more but not more than 390 kg/cm2 (as determined by test method ASTM D638)

—

a heat deflection temperature of 135 °C or more under load of 0,45 MPa (as determined by test method ASTM 648) (1)

0 %

31.12.2015

ex 3902 20 00

10

Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800

0 %

31.12.2018

ex 3902 20 00

20

Hydrogenated polyisobutene, in liquid form

0 %

31.12.2018

ex 3902 30 00

91

A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39

0 %

31.12.2018

ex 3902 30 00

95

A-B-A block copolymer, consisting of:

—

a copolymer of propylene and ethylene and

—

21 % (± 3 %) by weight of polystyrene

0 %

31.12.2016

ex 3902 30 00

97

Liquid ethylene-propylene-copolymer with:

—

a flashpoint of 250 °C or more,

—

a viscosity index of 150 or more,

—

of a number average molecular weight (Mn) of 650 or more

0 %

31.12.2016

ex 3902 90 90

52

Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin

0 %

31.12.2018

ex 3902 90 90

55

Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene

0 %

31.12.2018

ex 3902 90 90

60

Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics:

—

liquid at room temperature

—

obtained by cationic polymerisation of C-5 alkenes monomers

—

with a number average molecular weight (Mn) of 370 (± 50)

—

with a weight average molecular weight (Mw) of 500 (± 100)

0 %

31.12.2014

ex 3902 90 90

84

Blend of hydrogenated styrenic block copolymer, polyethylene wax, and tackifier resin, in the form of pellets, containing by weight:

—

70 (± 5) % of styrenic block copolymer,

—

15 (± 5) % of polyethylene wax, and

—

15 (± 5) % of tackifier resin

with the following physical properties:

—

able to stretch to at least 200 % of its original length

—

with a hysteresis of 50 (± 10) %

—

with a permanent deformation of no more than 20 %

for use in the manufacture of napkins and napkin liners for babies (1)

0 %

31.12.2015

ex 3902 90 90

92

Polymers of 4-methylpent-1-ene

0 %

31.12.2018

ex 3902 90 90

93

Synthetic poly-alpha-olefin having a viscosity of at least 38 × 10–6m2s–1 (38 centistokes) at 100 °C measured using the ASTM D 445 method

0 %

31.12.2016

ex 3902 90 90

98

Synthetic poly-alpha-olefin with a viscosity at 100 ° Celsius (measured according to method ASTM D 445) ranging from 3 centistokes to 9 centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40 % of tetradecene

0 %

31.12.2016

ex 3903 11 00

10

White expandable polystyrene beads with a thermal conductivity of not more than 0,034 W/mK at a density of 14,0 kg/m3 (± 1,5 kg/m3), containing 50 % recycled material

0 %

31.12.2018

ex 3903 19 00

30

Crystalline polystyrene with a melting point of 268 °C or more but not more than 272 °C and a setting point of 232 °C or more but not more than 242 °C, whether or not containing additives and filling material

0 %

31.12.2016

ex 3903 90 90

10

Butadiene-styrene copolymer pellets or granules, with:

—

a specific gravity of 1,05 (± 0,02),

—

a melt flow index at 200 °C/5 kg of 13 g/10 min (± 1 g/10 min)

0 %

31.12.2016

ex 3903 90 90

15

Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, n-butyl methacrylate, methacrylic acid and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1)

0 %

31.12.2016

ex 3903 90 90

20

Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, n-butyl methacrylate and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1)

0 %

31.12.2016

ex 3903 90 90

25

Dry ink powder or toner blend, consisting of a copolymer of styrene, n-butyl acrylate, methacrylic acid and polyolefin wax, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers (1)

0 %

31.12.2016

ex 3903 90 90

30

Butadiene-styrene copolymer pellets or granules with a melting point of 85 °C (± 5 °C), containing by weight:

—

2 % or more but not more than 4 % of tris(tribromophenyl) triazine,

—

5 % or more but not more than 10 % of ethane-1,2-bis(pentabromophenyl),

—

3 % or more but not more than 5 % of antimony trioxide

0 %

31.12.2016

ex 3903 90 90

ex 3911 90 99

35

43

Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C

0 %

31.12.2018

ex 3903 90 90

ex 3911 90 99

40

50

Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average molecular weight (Mn) of 500 or more but not more than 6 000

0 %

31.12.2018

ex 3903 90 90

50

Crystalline copolymer of styrene and p-methylstyrene:

—

with a melting point of 240 °C or more but not more than 260 °C,

—

containing 5 % or more but not more than 15 % by weight of p-methylstyrene

0 %

31.12.2015

ex 3903 90 90

ex 3911 90 99

60

60

Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4 500, in flake or powder form

0 %

31.12.2016

ex 3903 90 90

75

Copolymer of styrene and vinyl pyrrolidone, containing by weight not more than 1 % of sodium dodecyl sulphate, in the form of an aqueous emulsion, for the manufacture of goods of subheading 3305 20 00 or of hair dyes of subheading 3305 90 (1)

0 %

31.12.2014

ex 3903 90 90

80

Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight:

—

minimum 65 % styrene,

—

maximum 25 % divinylbenzene

for use in the manufacture of ion exchange resins (1)

0 %

31.12.2018

ex 3903 90 90

86

Mixture containing by weight:

—

45 % or more but not more than 65 % of polymers of styrene

—

35 % or more but not more than 45 % of poly(phenylene ether)

—

not more than 10 % of other additives

and with one or more of the following special colour effects:

—

metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment

—

fluorescent, as characterized by emitting light during absorption of ultraviolet radiation

—

bright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale

0 %

31.12.2018

ex 3904 10 00

20

Poly(vinyl chloride) powder, not mixed with any other substances or containing any vinyl acetate monomers, with:

—

a degree of polymerisation of 1 000 (± 300) monomer units,

—

a coefficient of heat transmission (K-value) of 60 or more, but not more than 70,

—

a volatile material content of less than 2,00 % by weight,

—

a sieve non-passing fraction at a mesh width of 120 μm of not more than 1 % by weight,

for use in the manufacture of battery separators (1)

0 %

31.12.2014

ex 3904 30 00

20

Copolymer of vinyl chloride with vinyl acetate and maleic acid, containing by weight:

—

80,5 % or more but not more than 81,5 % of vinyl chloride,

—

16,5 % or more but not more than 17,5 % of vinyl acetate and

—

1,5 % or more but not more than 2,5 % of maleic acid,

for use in the heat-sealing of plastics onto steel substrate for industrial uses (1)

0 %

31.12.2014

ex 3904 30 00

ex 3904 40 00

30

91

Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:

—

87 % or more but not more than 92 % of vinyl chloride,

—

2 % or more but not more than 9 % of vinyl acetate and

—

1 % or more but not more than 8 % of vinyl alcohol,

in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1)

0 %

31.12.2018

ex 3904 40 00

93

Copolymer of vinyl chloride and methyl acrylate, containing by weight 80 % (± 1 %) of vinyl chloride and 20 % (± 1 %) of methyl acrylate, in the form of a aqueous emulsion

0 %

31.12.2018

ex 3904 50 90

92

Vinylidene-chloride methacrylate co-polymer for use in the manufacture of monofilaments (1)

0 %

31.12.2014

ex 3904 61 00

20

Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions

0 %

31.12.2018

ex 3904 61 00

30

Polytetrafluoroethylene, in the form of powder, of a specific surface of 8 m2/g or more but not more than 12 m2/g, a particle size distribution of 10 % of less than 10 μm and 90 % of less than 35 μm and an average particle size of 20 μm

0 %

31.12.2018

ex 3904 69 80

81

Poly(vinylidene fluoride) (CAS RN 24937-79-9)

0 %

31.12.2015

ex 3904 69 80

85

Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers

0 %

31.12.2017

ex 3904 69 80

93

Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6 (b) to Chapter 39

0 %

31.12.2018

ex 3904 69 80

94

Copolymer of ethylene and tetrafluoroethylene

0 %

31.12.2018

ex 3904 69 80

96

Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39

0 %

31.12.2018

ex 3904 69 80

97

Copolymer of chlorotrifluoroethylene and vinylidene difluoride

0 %

31.12.2018

ex 3905 30 00

10

Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors (1)

0 %

31.12.2017

ex 3905 91 00

20

Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 13 % of the monomer unit ethylene

0 %

31.12.2017

ex 3905 99 90

92

Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97 % or more but not more than 99 % of vinylpyrrolidone, in the form of a solution in water

0 %

31.12.2018

ex 3905 99 90

95

Hexadecylated or eicosylated polyvinylpyrrolidone

0 %

31.12.2018

ex 3905 99 90

96

Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25 000 or more but not more than 150 000 and containing by weight:

—

9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and

—

5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol

0 %

31.12.2018

ex 3905 99 90

97

Povidone (INN)-iodine (CAS RN 25655-41-8)

0 %

31.12.2018

ex 3905 99 90

98

Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups

0 %

31.12.2018

3906 90 60

 

Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide

0 %

31.12.2018

ex 3906 90 90

10

Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004 (1)

0 %

31.12.2018

ex 3906 90 90

15

Photosensitive resin consisting of modified acrylate, acrylic monomer, catalyst (photoinitiator) and stabilizer

0 %

31.12.2018

ex 3906 90 90

27

Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate

0 %

31.12.2017

ex 3906 90 90

30

Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a number average molecular weight (Mn) of 500 or more but not more than 6 000

0 %

31.12.2018

ex 3906 90 90

35

White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a particle size of not more than 18 μm, insoluble in water

0 %

31.12.2018

ex 3906 90 90

40

Transparent acrylic polymer in packages of not more than 1 kg, and not for retail sale with:

—

a viscosity of not more than 50 000 Pa·s at 120 °C as determined by the test method ASTM D 3835

—

a weight average molecular weight (Mw) of more than 500 000 but not more than 1 200 000 according to the Gel Permeation Chromatography (GPC) test,

—

a residual monomer content of less than 1 %

0 %

31.12.2015

ex 3906 90 90

41

Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30

0 %

31.12.2014

ex 3906 90 90

45

Acrylonitrile-butadiene-styrene-methylmethacrylate copolymer pellets with:

—

a melting point of 96 °C (± 3 °C),

—

a specific gravity of 1,03 or more but not more than 1,07, and

containing by weight:

—

25 % or more but not more than 50 % of acrylonitrile-butadiene-styrene, and

—

50 % or more but not more than 75 % of methylmethacrylate

0 %

31.12.2016

ex 3906 90 90

50

Polymers of esters of acrylic acid with one or more of the following monomers in the chain:

—

chloromethyl vinyl ether,

—

chloroethyl vinyl ether,

—

chloromethylstyrene,

—

vinyl chloroacetate,

—

methacrylic acid,

—

butenedioic acid monobutyl ester,

containing by weight not more than 5 % of each of the monomeric units, in one of the forms mentioned in note 6 (b) to Chapter 39

0 %

31.12.2018

ex 3906 90 90

65

Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) of 65 °C (± 5 °C), measured with Differential Scanning Calorimetry (DSC)

0 %

31.12.2018

ex 3906 90 90

80

Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates)

0 %

31.12.2018

ex 3906 90 90

85

Non aqueous dispersion type polymers of esters of acrylic acid with a hydrolyzable silyl group at one or both polymer ends

0 %

31.12.2014

ex 3907 20 11

10

Poly(ethylene oxide) of a number average molecular weight (Mn) of 100 000 or more

0 %

31.12.2018

ex 3907 20 11

20

Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40 000

0 %

31.12.2018

ex 3907 20 11

40

Polyethylene glycol with an ethylene oxide chain length of not more than 30, having butyl-2-cyano 3-(4-hydroxyphenyl) acrylate end groups, for use as a UV barrier in liquid masterbatches (1)

0 %

31.12.2015

ex 3907 20 11

50

[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-hydroxypoly(oxo-1,2-ethanediyl) (CAS RN 104810-48-2)

0 %

31.12.2016

ex 3907 20 11

60

Preparation containing:

—

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and

—

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)

0 %

31.12.2016

ex 3907 20 20

20

Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2 700 or more but not more than 3 100 (CAS RN 25190-06-1)

0 %

31.12.2017

ex 3907 20 20

30

Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone

0 %

31.12.2018

ex 3907 20 20

40

Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 3 500 (± 100)

0 %

31.12.2018

ex 3907 20 99

15

Poly(oxypropylene) having alkoxysilyl end-groups

0 %

31.12.2018

ex 3907 20 99

30

Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)

0 %

31.12.2018

ex 3907 20 99

35

Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate

0 %

31.12.2018

ex 3907 20 99

45

Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups

0 %

31.12.2018

ex 3907 20 99

50

Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient

0 %

31.12.2018

ex 3907 20 99

55

Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5 000

0 %

31.12.2018

ex 3907 20 99

60

Polytetramethylene oxide di-p-aminobenzoate

0 %

31.12.2016

ex 3907 20 99

65

L-Lysine N-hydroxysuccinimidyl ester.alpha.,.epsilon.-bis(polyethylene glycol monomethylether carbamate) (CAS RN 266318-38-1) of a number average molecular weight (Mn) of 38 000 or more but not more than 40 000

0 %

31.12.2018

ex 3907 30 00

ex 3926 90 97

40

70

Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8533, 8535, 8536, 8541, 8542 or 8548 (1)

0 %

31.12.2018

ex 3907 30 00

50

Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with:

—

a zinc borate hydrate content of not more than 40 % by weight,

—

a diantimony trioxide content of not more than 5 % by weight

0 %

31.12.2018

ex 3907 30 00

60

Polyglycerol polyglycidyl ether resin (CAS RN 105521-63-9)

0 %

31.12.2017

ex 3907 40 00

10

Polycarbonate pellets or granules:

—

containing 7 % or more but not more than 15 % by weight of non halogen flame retardant, and

—

with a specific gravity of 1,20 (± 0,01)

0 %

31.12.2016

ex 3907 40 00

20

Polycarbonate pellets or granules with a specific gravity of 1,32 (± 0,03), containing 20 % (± 5 %) of glass fibre

0 %

31.12.2016

ex 3907 40 00

30

Polycarbonate pellets or granules with a specific gravity of 1,18 or more but not more than 1,25, containing by weight:

—

77 % or more but not more than 90 % of polycarbonate,

—

8 % or more but not more than 20 % of phosphoric acid ester,

—

0,1 % or more but not more than 1 % of antioxidant, and

whether or not containing 1 % or more but not more than 5 % of flame retardant

0 %

31.12.2016

ex 3907 40 00

40

Polycarbonate granules with:

—

a melt flow rate of 18 g/10 min/300 °C/1,2 kg (according to ASTM D 1238)

—

a tensile strength of 69 MPa according to ASTM D 638 and

—

a flexural strength of 112 MPa according to ASTM D 790

0 %

31.12.2016

ex 3907 40 00

50

Polycarbonate resin, pellets or granules, with:

—

a specific gravity of 1,20 (± 0,05),

—

a heat deflection temperature of 146 °C (± 3 °C) at 4,6 kgf/cm2, and

—

a melt flow index of 20 (± 10) g/10 min at 300 °C/1,2 kg

0 %

31.12.2016

ex 3907 40 00

60

Polycarbonate acrylonitrile-butadiene-styrene pellets or granules with specific gravity of 1,20 (± 0,05), containing by weight:

—

65 % or more but not more than 90 % of polycarbonate,

—

5 % or more but not more than 15 % of acrylonitrile-butadiene-styrene,

—

5 % or more but not more than 20 % of phosphoric acid ester and,

—

0,1 % or more but not more than 5 % of antioxidant

0 %

31.12.2016

ex 3907 60 80

10

Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol

0 %

31.12.2018

ex 3907 60 80

30

Oxygen binding concentrate consisting of a blend of:

—

a copolymer obtained from poly(ethylene terephthalate), pyromellitic dianhydride (PMDA) and a hydroxyl substituted polybutadiene

—

a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, and

—

organic dyes and/or organic and inorganic pigments

where the first co-polymer predominates

0 %

31.12.2014

ex 3907 60 80

40

Poly(ethylene terephthalate) pellets or granules:

—

with a specific gravity of 1,23 or more but not more than 1,27 at 23 °C, and

—

containing not more than 10 % by weight of other modifiers or additives

0 %

31.12.2016

ex 3907 60 80

50

Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of:

—

not more than 75 μm of polyethylene,

—

not more than 50 μm of polyamide,

—

not more than 15 μm of polyethylene terephthalate and

—

not more than 9 μm of aluminium

with a tensile strength of more than 70 N/15 mm and oxygen transmission rate of less than 0,1 cm3/m2/24 hrs at 0,1 MPa

0 %

31.12.2017

3907 70 00

 

Poly(lactic acid)

0 %

31.12.2018

ex 3907 91 90

10

Diallyl phthalate prepolymer, in powder form

0 %

31.12.2014

ex 3907 99 90

10

Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder

0 %

31.12.2018

ex 3907 99 90

20

Liquid crystal copolyester with a melting point of not less than 270 °C, whether or not containing fillers

0 %

31.12.2018

ex 3907 99 90

25

Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol

0 %

31.12.2017

ex 3907 99 90

ex 3913 90 00

30

20

Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)

0 %

31.12.2015

ex 3907 99 90

60

Copolymer of terephthalic acid and isophthalic acid with bisphenol A

0 %

31.12.2017

ex 3907 99 90

70

Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol

0 %

31.12.2014

ex 3907 99 90

80

Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles

0 %

31.12.2015

ex 3908 90 00

10

Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39

0 %

31.12.2018

ex 3908 90 00

30

Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine

0 %

31.12.2018

ex 3908 90 00

50

Oxygen binding concentrate consisting of a blend of:

—

a copolymer obtained from poly(ethyleneterephthalate), pyromellitic dianhydride (PMDA) and a hydroxyl substituted polybutadiene

—

a barrier co-polymer (as determined by the ASTM method F1115-95 (2001)) obtained from xylylene diamines and adipic acid, and

—

organic dyes and/or organic and inorganic pigments

where the second co-polymer predominates

0 %

31.12.2014

ex 3908 90 00

60

Copolymer consisting of:

—

hexanedioic acid

—

12-aminododecanoic acid

—

hexahydro-2H-azepin-2-one, and

—

1,6-hexanediamine

0 %

31.12.2017

ex 3909 40 00

10

Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150 μm

0 %

31.12.2018

ex 3909 40 00

20

Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices (1)

0 %

31.12.2015

ex 3909 40 00

30

Mixture of:

—

alkylphenol - formaldehyde resin, whether or not brominated, and

—

zinc oxide

0 %

31.12.2017

ex 3909 40 00

40

Polymer in powder form with a content of:

—

phenolic resin polymer (CAS RN 9003-35-4) with 80 % by weight or more but not more than 90 %

—

phenol (CAS RN 108-95-2) with not more than 5 % and

—

hexamethylenetetramine (CAS RN 100-97-0) with 5 % by weight or more but not more than 15 %

0 %

31.12.2018

ex 3909 50 90

10

UV curable water soluble liquid photopolymer consisting of a mixture by weight of

—

60 % or more of two-functional acrylated polyurethane oligomers and

—

30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and

—

10 % (± 3 %) of hydroxyl functionalized mono-functional (metha) acrylates

0 %

31.12.2014

ex 3910 00 00

20

Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]

0 %

31.12.2018

ex 3910 00 00

40

Biocompatible silicones for the manufacture of long term surgical implants (1)

0 %

31.12.2016

ex 3910 00 00

50

Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum

0 %

31.12.2017

ex 3910 00 00

60

Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups

0 %

31.12.2014

ex 3910 00 00

70

Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices

0 %

31.12.2018

ex 3911 10 00

81

Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with:

—

an iodine value of more than 120 and

—

a Gardner Colour of more than 10 for the pure product or

—

a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)

0 %

31.12.2018

ex 3911 90 19

10

Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4′-biphenylene)

0 %

31.12.2018

ex 3911 90 19

30

Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide

0 %

31.12.2017

ex 3911 90 19

40

m- Xylene formaldehyde resin

0 %

31.12.2016

ex 3911 90 99

25

Copolymer of vinyltoluene and α-methylstyrene

0 %

31.12.2018

ex 3911 90 99

30

1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated

0 %

31.12.2015

ex 3911 90 99

31

Copolymers of butadiene and maleic acid, whether or not containing its ammonium salts

0 %

31.12.2014

ex 3911 90 99

35

Alternated copolymer of ethylene and maleic anhydride (EMA)

0 %

31.12.2015

ex 3911 90 99

40

Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight

0 %

31.12.2018

ex 3911 90 99

45

Copolymer of maleic acid and methyl vinyl ether

0 %

31.12.2018

ex 3911 90 99

53

Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)

0 %

31.12.2017

ex 3911 90 99

57

Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)

0 %

31.12.2017

ex 3911 90 99

65

Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether

0 %

31.12.2018

ex 3911 90 99

86

Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)

0 %

31.12.2016

ex 3912 11 00

30

Cellulose triacetate (CAS RN 9012-09-3)

0 %

31.12.2016

ex 3912 11 00

40

Cellulose diacetate powder

0 %

31.12.2015

ex 3912 20 11

10

Nitrocellulose (CAS RN 9004-70-0)

0 %

31.12.2016

ex 3912 39 85

10

Ethylcellulose, not plasticized

0 %

31.12.2018

ex 3912 39 85

20

Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose

0 %

31.12.2018

ex 3912 39 85

30

Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms

0 %

31.12.2018

ex 3912 39 85

40

Hypromellose (INN) (CAS RN 9004-65-3)

0 %

31.12.2016

ex 3912 90 10

10

Cellulose acetate propionate, non-plasticised, in the form of powder:

—

containing by weight 25 % or more of propionyl (as determined by the ASTM D 817-72 method) and

—

of a viscosity of not more than 120 poise (as determined by the ASTM D 817-72 method),

for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings (1)

0 %

31.12.2018

ex 3912 90 10

20

Hydroxypropyl methylcellulose phthalate

0 %

31.12.2018

ex 3913 90 00

85

Sterile sodium hyaluronate (CAS RN 9067-32-7)

0 %

31.12.2018

ex 3913 90 00

92

Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (Mw) of 100 000 to 300 000

0 %

31.12.2018

ex 3913 90 00

94

Granules containing by weight:

—

35 % or more but less than 75 % of a high amylose extruded biopolymer produced from corn starch,

—

5 % or more but less than 16 % polyvinyl alcohol,

—

10 % or more but less than 46 % of polyol plasticisers,

—

0,25 % or more but less than 3 % of stearic acid,

—

whether or not containing 30 % (± 10 %) of biodegradable polyester resin but never to a level that exceeds the amount of the high amylose biopolymer

0 %

31.12.2016

ex 3913 90 00

95

Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)

0 %

31.12.2018

ex 3913 90 00

96

Powder consisting of 90 % (± 5 %) by weight of a high amylose extruded biopolymer produced from corn starch, 10 % (± 5 %) by weight of a synthetic polymer and 0,5 % (± 0,25 %) of stearic acid

0 %

31.12.2016

ex 3916 20 00

91

Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives:

—

titanium dioxide

—

poly(methyl methacrylate)

—

calcium carbonate

—

binding agents

0 %

31.12.2014

ex 3916 90 10

10

Rods with cellular structure, containing by weight:

—

polyamide-6 or poly(epoxy anhydride)

—

7 % or more but not more than 9 % of polytetrafluorethylene if present

—

10 % or more but not more than 25 % of inorganic fillers

0 %

31.12.2018

ex 3917 32 00

91

Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600 mm, a diameter of not more than 85 mm and a wall-thickness of 30 μm or more but not more than 110 μm

0 %

31.12.2018

ex 3917 40 00

91

Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses

0 %

31.12.2014

ex 3919 10 19

ex 3919 10 80

ex 3919 90 00

10

25

31

Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

0 %

31.12.2018

ex 3919 10 19

20

Rolls of two-sided adhesive tape:

—

coated with non-vulcanised natural or synthetic rubber

—

with a width of 20 mm or more but not more than 40 mm

—

containing silicone, aluminium hydroxide, acryl and urethane

0 %

31.12.2018

ex 3919 10 80

ex 3919 90 00

ex 3920 61 00

21

21

20

Reflecting sheet, consisting of:

—

a polycarbonate or acrylic polymer film totally embossed on one side in a regular shaped pattern,

—

covered on both sides with one or more layers of plastic material,

—

whether or not covered on one side with a self-adhesive layer and a release sheet

0 %

31.12.2018

ex 3919 10 80

23

Reflecting film, consisting of several layers including:

—

poly(vinyl chloride);

—

polyurethane with, on one side, imprints against counterfeiting, alteration or substitution of data or duplication, and on the other side, a layer of glass microspheres;

—

a layer incorporating a security and/or official mark which changes appearance with angle of view;

—

metallized aluminium;

—

and adhesive, covered on one side with a release liner

0 %

31.12.2014

ex 3919 10 80

ex 3919 90 00

27

20

Polyester film:

—

coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and

—

on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner

0 %

31.12.2014

ex 3919 10 80

30

Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 10 to 20 cm wide, 10 to 210 m long and with a total thickness of 10 to 50 μm, not for retail sale

0 %

31.12.2016

ex 3919 10 80

32

Polytetrafluoroethylene film:

—

with a thickness of 110 μm or more,

—

with a surface resistance of between 102-1014 ohms as determined by test method ASTM D 257,

—

coated on one side with an acrylic pressure sensitive adhesive

0 %

31.12.2014

ex 3919 10 80

35

Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

0 %

31.12.2018

ex 3919 10 80

37

Polytetrafluoroethylene film:

—

with a thickness of 100 μm or more,

—

an elongation at break of not more than 100 %,

—

coated on one side with a pressure sensitive silicon adhesive

0 %

31.12.2014

ex 3919 10 80

ex 3919 90 00

40

43

Black poly(vinyl chloride) film:

—

with a gloss of more than 30 degrees according to ASTM D2457,

—

whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner

0 %

31.12.2016

ex 3919 10 80

ex 3919 90 00

43

26

Ethylene vinyl acetate film:

—

of a thickness of 100 μm or more,

—

coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester liner

0 %

31.12.2014

ex 3919 10 80

ex 3919 90 00

45

45

Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm

0 %

31.12.2017

ex 3919 10 80

ex 3919 90 00

47

32

Polyester, polyurethane or polycarbonate foil:

—

with pressure sensitive silicone polymer adhesive,

—

of a total thickness of not more than 0,7 mm,

—

of a total width of 1 cm or more, but not more than 1 m,

—

whether or not in rolls

of a kind used for the protection of the surface of products of headings 8521 and 8528

0 %

31.12.2017

ex 3919 10 80

ex 3919 90 00

ex 3920 10 89

50

41

25

Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs (1)

0 %

31.12.2018

ex 3919 10 80

ex 3919 90 00

ex 3920 10 28

ex 3920 10 89

53

34

93

50

Polyethylene foil:

—

with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces,

—

of a total thickness of 0,025 mm or more, but not more than 0,7 mm, and

—

of a total width of 6 cm or more, but not more than 1 m,

—

whether or not in rolls,

of a kind used for the protection of the surface of products of headings 8521 and 8528

0 %

31.12.2017

ex 3919 10 80

ex 3919 90 00

55

53

Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 ° of more than 25 N/cm (as determined by the ASTM D 3330 method)

0 %

31.12.2017

ex 3919 10 80

60

Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet

0 %

31.12.2018

ex 3919 10 80

ex 3919 90 00

65

57

Self-adhesive reflecting sheet whether or not in segmented pieces:

—

showing a regular pattern,

—

with or without an application tape layer,

—

consisting of a film of acrylic polymer followed by a layer of poly(methyl methacrylate) containing microprisms,

—

whether or not containing an additional layer of polyester and

—

an adhesive with a final release sheet

0 %

31.12.2018

ex 3919 10 80

ex 3919 90 00

70

75

Rolls of polyethylene foil:

—

self-adhesive on one side,

—

of a total thickness of 0,025 mm or more, but not more than 0,09 mm,

—

of a total width of 60 mm or more, but not more than 1 110 mm,

of a kind used for the protection of the surface of products of headings 8521 or 8528

0 %

31.12.2016

ex 3919 10 80

ex 3919 90 00

75

80

Self-adhesive reflecting film, consisting of several layers including:

—

a copolymer of acrylic resin,

—

polyurethane,

—

a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,

—

glass microspheres, and

—

an adhesive layer, with a release liner on one or both sides

0 %

31.12.2016

ex 3919 10 80

ex 3919 90 00

80

83

Acrylic tape put up in rolls:

—

self-adhesive on both sides,

—

of a total thickness of 0,04 mm or more, but not more than 1,25 mm,

—

of a total width of 5 mm or more but not more than 1 205 mm

for use in the manufacture of products of headings 8521 and 8528 (1)

0 %

31.12.2016

ex 3919 10 80

ex 3919 90 00

85

28

Poly(vinyl chloride) or polyethylene or any other polyolefine film:

—

of a thickness of 65 μm or more,

—

coated on one side with an acrylic UV-sensitive adhesive and a polyester liner

0 %

31.12.2014

ex 3919 90 00

19

Transparent poly(ethylene terephthalate) self-adhesive film:

—

free from impurities or faults,

—

coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound,

—

whether or not with a printable dust-proof layer of modified long chain alkyl organic compound,

—

with a total thickness without the liner of 54 μm or more but not more than 64 μm, and

—

a width of more than 1 295 mm but not more than 1 305 mm

0 %

31.12.2018

ex 3919 90 00

22

Black polypropylene film:

—

with a gloss of more than 20 degrees as determined by test method ASTM D2457,

—

whether or not covered on one side with a protective poly(ethylene terephthalate) film and on the other side with a pressure sensitive adhesive with channels and a release liner

0 %

31.12.2014

ex 3919 90 00

23

Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner

0 %

31.12.2018

ex 3919 90 00

24

Reflecting laminated sheet:

—

consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,

—

covered on both sides with one or more layers of plastic material and

—

covered on one side with an adhesive layer and a release sheet

0 %

31.12.2014

ex 3919 90 00

25

Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner

0 %

31.12.2017

ex 3919 90 00

27

Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147 N/25 mm and an electrostatic discharge of not more than 500 V

0 %

31.12.2018

ex 3919 90 00

29

Polyester film coated on both sides with an acrylic and/or rubber (pressure sensitive) adhesive put up in rolls of a width of 45,7 cm or more but not more than 132 cm (supplied with a release liner)

0 %

31.12.2014

ex 3919 90 00

33

Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245 mm but not more than 1 255 mm

0 %

31.12.2018

ex 3919 90 00

35

Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with:

—

a layer of polyurethane containing glass micro beads,

—

a layer of poly(ethylene vinyl acetate),

—

an adhesive layer, and

—

a release sheet

0 %

31.12.2018

ex 3919 90 00

ex 3920 49 10

36

95

Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride)

—

whether or not with a pressure or heat sensitive adhesive layer

—

whether or not with a release film

—

with a toxicity (as determined by test method ABD 0031) of not more than 70 ppm hydrogen fluoride, not more than 120 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together

—

with a flammability within 60 seconds of not more than 130 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83)

—

with a weight (without release film) of 240 g/m2 (± 30 g/m2) without adhesive layer, of 340 g/m2 (± 40 g/m2) with heat sensitive adhesive layer or of 330 g/m2 (± 40 gm2) with pressure sensitive layer

0 %

31.12.2017

ex 3919 90 00

37

UV-absorbing film of poly (vinyl chloride):

—

with a thickness of 78 μm or more,

—

covered on one side with an adhesive layer and with a release sheet,

—

with an adhesive strength of 1 764 mN / 25 mm or more

0 %

31.12.2014

ex 3919 90 00

38

Self-adhesive film composed of:

—

a top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide,

—

whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable vinyl acetate polymer emulsions,

—

not more than 6 % by weight of other additives,

—

a pressure sensitive adhesive; and

—

covered on one side with a release liner,

—

whether or not with a separate self-adhesive over laminate protective film,

—

of a total thickness of not more than 400 μm

0 %

31.12.2017

ex 3919 90 00

39

Poly(vinyl chloride) sheeting, of a thickness of less than 1 mm, coated with an adhesive in which are embedded glass balls of a diameter of not more than 100 μm

0 %

31.12.2018

ex 3919 90 00

40

Film, with a total thickness of 40 μm or more, consisting of one or more layers of transparent polyester film:

—

containing at least one infrared reflective layer with a total normal reflectance according to EN 12898 of 80 % or more

—

having on one side a layer with a normal emissivity according to EN 12898 of not more than 0,2

—

coated on the other side with a pressure sensitive adhesive and a release liner

0 %

31.12.2017

ex 3919 90 00

42

Self-adhesive film composed of:

—

a first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent,

—

a second layer containing a maleic anhydride copolymer,

—

a third layer containing a mixture of low density polyethylene, titanium dioxide and additives,

—

a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment,

—

a pressure sensitive adhesive; and

—

covered on one side with a release liner

—

whether or not with a separate self-adhesive over laminate protective film

—

of a total thickness of not more than 400 μm

0 %

31.12.2017

ex 3919 90 00

ex 3921 90 60

44

95

Printed laminated sheet

—

with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride),

—

on one side covered with a layer of poly(vinyl fluoride),

—

whether or not with a pressure sensitive adhesive layer and a release film on the other side,

—

with a toxicity (as determined by test method ABD 0031) of not more than 50 ppm hydrogen fluoride, not more than 85 ppm hydrogen chloride, not more than 10 ppm hydrogen cyanide, not more than 10 ppm nitrogen oxides, not more than 300 ppm carbon monoxide and not more than 10 ppm dihydrogen sulphide and sulphur dioxide taken together,

—

with a flammability within 60 seconds of not more than 110 mm (as determined by test method FAR 25 App.F Pt. I Amdt.83), and

—

with a weight (without release film) of 490 g/m2 (± 45 g/m2) without adhesive layer or of 580 g/m2 (± 50 g/m2) with pressure sensitive layer

0 %

31.12.2017

ex 3919 90 00

ex 9001 20 00

47

40

Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side

0 %

31.12.2017

ex 3919 90 00

49

Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet

0 %

31.12.2018

ex 3919 90 00

51

Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet

0 %

31.12.2018

ex 3919 90 00

60

Reflecting film containing:

—

a poly(vinyl chloride) layer,

—

a polyurethane layer,

—

a glass microspheres layer,

—

a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view,

—

a metallised aluminium layer, and

—

an adhesive, covered on one side with a release liner

0 %

31.12.2015

ex 3919 90 00

63

Co-extruded trilayer film,

—

each layer containing a mixture of polypropylene and polyethylene,

—

containing not more than 3 % by weight of other polymers,

—

whether or not containing titanium dioxide in the core layer,

—

coated with an acrylic pressure sensitive adhesive and

—

with a release liner

—

of an overall thickness of not more than 110 μm

0 %

31.12.2015

ex 3919 90 00

65

Self-adhesive film with a thickness of 40 μm or more, but not more than 400 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner

0 %

31.12.2015

ex 3919 90 00

70

Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad

0 %

31.12.2015

ex 3919 90 00

81

Film of a minimum thickness of 0,36 mm, consisting of the following:

—

an embossed polyester layer,

—

a caprolactone-cyclohexylene isocyanate copolymer layer,

—

a pressure sensitive adhesive

and covered on one side with a release liner

0 %

31.12.2018

ex 3919 90 00

85

Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and copper:

—

having a minimum reflectance of 93,5 % as determined by ASTM G173-03,

—

covered on one side with a removable layer of polyethylene,

—

covered on the other side with an acrylic pressure sensitive adhesive and a siliconised polyester liner

0 %

31.12.2016

ex 3919 90 00

87

Self-adhesive transparent film, having a transmittance of more than 90 % and a haze of less than 3 % (as determined by ASTM D1003), consisting of several layers including:

—

an acrylic adhesive layer with a thickness of 20 μm or more but not more than 70 μm,

—

a polyurethane based layer with a thickness of 100 μm or more but not more than 300 μm

0 %

31.12.2016

ex 3920 10 25

ex 3920 10 89

10

20

Film of a thickness of not more than 0,20 mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber (1)

0 %

31.12.2018

ex 3920 10 25

20

Film of polyethylene, of a kind used for typewriter ribbon

0 %

31.12.2018

ex 3920 10 28

91

Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:

—

is repetitive and equally spaced along the length of the film

—

is equally and visibly aligned when viewed from the back or front of the film

0 %

31.12.2018

ex 3920 10 40

30

Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalized polymers of ethylene, consisting of:

—

a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,

—

covered on either side with two or more layers of polymeric material,

and having an overall total thickness of not more than 110 μm

0 %

31.12.2017

ex 3920 10 89

30

Ethylene vinyl acetate (EVA) film with:

—

a raised relief surface with embossed undulations, and

—

a thickness of more than 0,125 mm

0 %

31.12.2016

ex 3920 10 89

40

Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm

0 %

31.12.2016

ex 3920 20 21

30

Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5 μm or more but not more than 13,5 μm

0 %

31.12.2018

ex 3920 20 21

40

Sheets of biaxially - oriented polypropylene film:

—

with the thickness of not more than 0,1 mm,

—

printed on both sides with specialised coatings to allow banknote security printing

0 %

31.12.2016

ex 3920 20 29

ex 8507 90 30

50

95

Sheet of polypropylene in the form of a roll:

—

with a thickness of not more than 30 μm,

—

of a width of not more than 210 mm,

—

conforming to ASTM D882,

for use in the manufacture of separators for lithium-ion electric vehicle batteries (1)

0 %

31.12.2016

ex 3920 20 29

ex 3920 20 80

55

93

Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of:

—

a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers,

—

covered on either side with two or more layers of polymeric material,

and having an overall total thickness of not more than 110 μm

0 %

31.12.2017

ex 3920 20 29

92

Mono-axial oriented film, of a total thickness of not more than 75 μm, consisting of two or three layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:

—

a tensile strength in the machine direction of 140 MPa or more but not more than 270 MPa and

—

a tensile strength in the transverse direction of 20 MPa or more but not more than 40 MPa

as determined by test method ASTM D882/ISO 527-3

0 %

31.12.2018

ex 3920 20 29

93

Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, having:

—

a thickness of 55 μm or more but not more than 97 μm,

—

a tensile modulus in the machine direction of 0,75 GPa or more but not more than 1,45 GPa, and

—

a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,55 GPa

0 %

31.12.2014

ex 3920 20 29

94

Co-extruded trilayer film,

—

each layer containing a mixture of polypropylene and polyethylene,

—

containing not more than 3 % by weight of other polymers,

—

whether or not containing titanium dioxide in the core layer,

—

of an overall thickness of not more than 70 μm

0 %

31.12.2016

ex 3920 20 80

92

Laminated sheet or strip, consisting of a film of a thickness of 181 μm or more but not more than 223 μm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester

0 %

31.12.2018

ex 3920 20 80

95

Polypropylene sheet, put up in rolls, with:

—

flame retardant level of UL 94 V-0 for material thicknesses of 0,25 mm or more and level UL 94 VTM-0 for material thicknesses of 0,05 mm or more but not more than 0,25 mm (as determined by Flammability Standard UL-94)

—

dielectric breakdown of 13,1 kV or more but not more than 60,0 kV(as determined by ASTM D149)

—

tensile yield in a machine direction of 30 MPa or more but not more than 33 MPa (as determined by ASTM D882)

—

tensile yield in a transverse direction of 22 MPa or more but not more than 25 MPa (as determined by ASTM D882)

—

density range of 0,988 g/cm3 or more but not more than 1,035 g/cm3 (as determined by ASTM D792)

—

moisture absorption of 0,01 % or more but not more than 0,06 % (as determined by ASTM D570)

for use in the manufacture of insulators used in the electronics and electrical industries (1)

0 %

31.12.2017

ex 3920 43 10

92

Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticizer to 100 parts of poly(vinyl chloride)

0 %

31.12.2018

ex 3920 43 10

ex 3920 49 10

94

93

Film of a specular gloss of 70 or more, measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1 000 mm or more but not more than 1 450 mm, for use in the manufacture of goods of heading 9403 (1)

0 %

31.12.2018

ex 3920 43 10

95

Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet

0 %

31.12.2018

ex 3920 49 10

30

Film of a (polyvinyl)chloride-copolymer

—

containing by weight 45 % or more of fillers

—

on a support (1)

0 %

31.12.2018

ex 3920 51 00

20

Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm

0 %

31.12.2018

ex 3920 51 00

30

Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm

0 %

31.12.2018

ex 3920 51 00

40

Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)

0 %

31.12.2018

ex 3920 59 90

10

Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl acrylate with a thickness of 1,0 mm or more but not more than 1,3 mm, put up in rolls

0 %

31.12.2016

ex 3920 59 90

20

Reflecting laminated sheet, consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, covered on both sides with one or more layers of plastic material

0 %

31.12.2014

ex 3920 59 90

30

Non-self-adhesive reflecting film, consisting of several layers including:

—

a copolymer of acrylic resin

—

polyurethane

—

a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use

—

glass microspheres, and

—

a permanent liner of poly(ethyleneterephthalate)

0 %

31.12.2016

ex 3920 62 19

02

Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50 μm or more but not more than 350 μm, consisting especially of a layer containing carbon black

0 %

31.12.2018

ex 3920 62 19

08

Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:

—

only dyed in the mass, or

—

dyed in the mass and metallised on one side

0 %

31.12.2018

ex 3920 62 19

12

Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material

0 %

31.12.2018

ex 3920 62 19

18

Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material

0 %

31.12.2018

ex 3920 62 19

20

Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers (1)

0 %

31.12.2018

ex 3920 62 19

25

Film of poly(ethylene terephthalate) of a thickness of 186 μm or more but not more than 191 μm coated on one side with an acrylic layer in a matrix pattern

0 %

31.12.2014

ex 3920 62 19

38

Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm

0 %

31.12.2018

ex 3920 62 19

48

Sheets or rolls of poly(ethylene terephthalate):

—

coated on both sides with a layer of epoxy acrylic resin,

—

of a total thickness of 37 μm (± 3 μm)

0 %

31.12.2015

ex 3920 62 19

52

Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D 257-99 method)

0 %

31.12.2018

ex 3920 62 19

ex 3920 69 00

73

40

Iridescent film of polyester and poly(methyl methacrylate)

0 %

31.12.2018

ex 3920 62 19

76

Transparent poly(ethylene terephthalate) film:

—

coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,

—

with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,

—

with a light transmission of more than 93 %,

—

with a haze value of not more than 1,3 %,

—

with a total thickness of 10 μm or more but not more than 350 μm,

—

with a width of 800 mm or more but not more than 1 600 mm

0 %

31.12.2018

ex 3920 62 19

81

Poly(ethylene terephthalate) film:

—

of a thickness of not more than 20 μm,

—

coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm

0 %

31.12.2017

ex 3920 69 00

20

Film of poly(ethylene naphthalene-2,6-dicarboxylate)

0 %

31.12.2018

ex 3920 91 00

51

Poly(vinyl butyral) film containing by weight 25 % or more but not more than 28 % of tri-isobutyl phosphate as a plasticizer

0 %

31.12.2014

ex 3920 91 00

52

Poly(vinyl butyral) film:

—

containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticizer,

—

with a thickness of 0,73 mm or more but not more than 1,50 mm

0 %

31.12.2014

ex 3920 91 00

91

Poly(vinyl butyral) film having a graduated coloured band

3 %

31.12.2018

ex 3920 91 00

92

Plasticised film of polyvinyl butyral, containing by weight:

—

either 14,5 % or more but not more than 17,5 % of dihexyl adipate,

—

or 14,5 % or more but not more than 28,5 % of dibutyl sebacate

0 %

31.12.2014

ex 3920 91 00

93

Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:

—

a visible light transmission of 50 % or more,

—

coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),

—

a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm

for use in the manufacture of heat-reflecting or decorative laminated glass (1)

0 %

31.12.2014

ex 3920 91 00

95

Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2′-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser

0 %

31.12.2018

ex 3920 92 00

30

Polyamide film:

—

of a thickness of not more than 20 μm,

—

coated on at least one side with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 μm

0 %

31.12.2018

ex 3920 99 28

35

Polyether imide sheets, in rolls, with

—

a thickness of 5 μm or more, but not more than 14 μm,

—

a width of 478 mm or more, but not more than 532 mm,

—

a tensile strength at break of 78 MPa or more (as determined by JIS C-2318 for a film thickness of 50 μm),

—

an elongation at break of 50 % or more (as determined by JIS C-2318 for a film thickness of 50 μm),

—

a glass transition point (Tg) of 226 °C,

—

a continuous service temperature of 180 °C (as determined by UL-746 B for a film thickness of 50 μm),

—

a flammability of VTM-0 (as determined by UL 94 for a film thickness of 25 μm)

0 %

31.12.2018

ex 3920 99 28

40

Polymer film containing the following monomers:

—

poly (tetramethylene ether glycol),

—

bis (4-isocyanotocyclohexyl) methane,

—

1,4-butanediol or 1,3-butanediol,

—

with a thickness of 0,25 mm or more but not more than 5,0 mm,

—

embossed with a regular pattern on one surface,

—

and covered with a release sheet

0 %

31.12.2018

ex 3920 99 28

45

Transparent polyurethane film metallised on one side:

—

with a gloss of more than 90 degrees according to ASTM D2457

—

covered on the metalized side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer

—

covered on the other side with a protective poly(ethylene terephthalate) film

—

with a total thickness of more than 204 μm but not more than 244 μm

0 %

31.12.2018

ex 3920 99 28

50

Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film

0 %

31.12.2016

ex 3920 99 28

55

Thermoplastic polyurethane film extruded, with:

—

not self-adhesive,

—

an index of yellow lower of more than 1,0 but not more than 2,5 for 10 mm stacked films (as determined by test method ASTM E 313-10),

—

a light transmission higher to 87 % for 10 mm stacked films (as determined by test method ASTM D 1003-11),

—

a total thickness of 0,38 mm or more, but not more than 7,6 mm,

—

a width of 99 cm or more, but not more than 305 cm,

of a kind used in the production of laminated safety glass

0 %

31.12.2017

ex 3920 99 28

60

Silicone tape, plate or strip:

—

of a total thickness of 2 mm or more, but not more than 9 mm,

—

of a total width of 12 mm or more, but not more than 65 mm,

for use in the manufacture of products of headings 8521 or 8528 (1)

0 %

31.12.2016

ex 3920 99 28

70

Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:

—

microspheres with a coating of metal, whether or not alloyed with gold,

—

an adhesive layer,

—

with a protective layer of silicone or poly(ethylene terephthalate) on one side,

—

with a protective layer of poly(ethylene terephthalate) on the other side, and

—

with a width of 5 cm or more but not more than 100 cm

—

with a length of not more than 2 000 m

0 %

31.12.2016

ex 3920 99 59

25

Poly(1-chlorotrifluoroethylene) film

0 %

31.12.2018

ex 3920 99 59

50

Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019 mm or more but not more than 0,14 mm, impermeable to water vapour

0 %

31.12.2018

ex 3920 99 59

55

Ion-exchange membranes of fluorinated plastic material

0 %

31.12.2018

ex 3920 99 59

60

Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 45 MPa and an elongation at break of 250 % or more but not more than 900 %

0 %

31.12.2018

ex 3920 99 90

20

Anisotropic conductive film, in rolls, of a width of 1,5 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays

0 %

31.12.2018

ex 3921 13 10

10

Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092

0 %

31.12.2018

ex 3921 13 10

20

Rolls of open-cell polyurethane foam:

—

with a thickness of 2,29 mm (± 0,25 mm),

—

surface-treated with a foraminous adhesion promoter, and

—

laminated to a polyester film and a layer of textile material

0 %

31.12.2017

ex 3921 19 00

30

Blocks with cellular structure, containing by weight:

—

polyamide-6 or poly(epoxy anhydride)

—

7 % or more but not more than 9 % of polytetrafluorethylene if present

—

10 % or more but not more than 25 % of inorganic fillers

0 %

31.12.2018

ex 3921 19 00

91

Microporous polypropylene film of a thickness of not more than 100 μm

0 %

31.12.2018

ex 3921 19 00

93

Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment (1)

0 %

31.12.2018

ex 3921 19 00

95

Film of polyethersulfone, of a thickness of not more than 200 μm

0 %

31.12.2018

ex 3921 19 00

96

Cellular film, consisting of a layer of polyethylene of a thickness of 90 μm or more but not more than 140 μm and a layer of regenerated cellulose of a thickness of 10 μm or more but not more than 40 μm

0 %

31.12.2018

ex 3921 90 10

10

Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres

0 %

31.12.2018

ex 3921 90 10

20

Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin

0 %

31.12.2018

ex 3921 90 55

20

Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring:

—

469,9 mm (± 2 mm) × 622,3 mm (± 2 mm), or

—

469,9 mm (± 2 mm) × 414,2 mm (± 2 mm), or

—

546,1 mm (± 2 mm) × 622,3 mm (± 2 mm

for use in the manufacture of printed circuit boards (1)

0 %

31.12.2018

ex 3921 90 55

ex 7019 40 00

25

20

Prepreg sheets or rolls containing polyimide resin

0 %

31.12.2014

ex 3921 90 55

30

Prepreg sheets or rolls containing brominated epoxy resin reinforced with glass fabric, having

—

a flow of not more than 3,6 mm (as determined by IPC-TM 650.2.3.17.2), and

—

a glass transition temperature (Tg) of more than 170 °C (as determined by IPC-TM 650.2.4.25)

for use in the manufacture of printed circuit boards (1)

0 %

31.12.2014

ex 3921 90 60

ex 5407 71 00

ex 5903 90 99

91

20

10

Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form

0 %

31.12.2018

ex 3921 90 60

93

Film, of a specular gloss of 30 or more but not more than 60 measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances (1)

0 %

31.12.2018

ex 3921 90 90

ex 8507 90 80

10

50

Roll of polymer-metal laminate comprising:

—

a layer of poly(ethylene terephthalate),

—

a layer of aluminium,

—

a layer of polypropylene,

—

with a width of not more than 275 mm,

—

a total thickness of not more than 165 μm, and

—

conforming to ASTM D1701-91 and ASTM D882-95A

for use in the manufacture of lithium-ion electric vehicle batteries (1)

0 %

31.12.2016

ex 3923 10 00

10

Photomask or wafer compacts:

—

consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

—

having non porous, abrasion resistant or impact resistant surface properties,

—

fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and

—

with or without a gasket seal,

of a kind used in the photolithography or other semiconductor production to house photomasks or wafers

0 %

31.12.2016

ex 3923 30 90

10

Polyethylene container, for compressed hydrogen:

—

with aluminium bosses at both ends,

—

wholly embedded in an overwrap of carbon fibres impregnated with epoxide resin,

—

of a diameter of 213 mm or more, but not more than 368 mm,

—

a length of 860 mm or more, but not more than 1 260 mm and

—

a capacity of 18 litres or more, but not more than 50 litres

0 %

31.12.2018

ex 3926 90 92

20

Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material

0 %

31.12.2018

ex 3926 90 97

10

Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm

0 %

31.12.2018

ex 3926 90 97

15

Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems (1)

0 %

31.12.2018

ex 3926 90 97

25

Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3 μm or more but not more than 4,6 μm

0 %

31.12.2018

ex 3926 90 97

55

Flat product of polyethylene, perforated in opposing directions, of a thickness of 600 μm or more but not more than 1 200 μm and of a weight of 21 g/m2 or more but not more than 42 g/m2

0 %

31.12.2018

ex 3926 90 97

65

Die-cast decoration element made of polycarbonate resin, coated with

—

a silver-colour acrylic paint, and

—

a transparent scratch-resistant paint

of a kind used in the manufacture of car radio front panels

0 %

31.12.2018

ex 3926 90 97

80

Parts of car radio front panels

—

of acrylonitrile-butadiene-styrene with or without polycarbonate,

—

coated with a copper, a nickel and a chrome layers,

—

with a total thickness of coating of 5,54 μm or more but not more than 22,3 μm

0 %

31.12.2016

ex 4007 00 00

10

Siliconated vulcanised rubber thread and cord

0 %

31.12.2018

ex 4016 99 97

20

Soft rubber sealing stoppers for the manufacture of electrolytic capacitors (1)

0 %

31.12.2018

ex 4016 99 97

30

Tyre moulding bladder

0 %

31.12.2016

ex 4104 41 19

10

Buffalo leather, split, chrome tanned synthetic retanned ("crust"), dry

0 %

31.12.2017

4105 10 00

4105 30 90

 

Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114

0 %

31.12.2018

4106 21 00

4106 22 90

 

Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114

0 %

31.12.2018

4106 31 00

4106 32 00

4106 40 90

4106 92 00

 

Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 4114

0 %

31.12.2018

ex 5004 00 10

10

Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk

0 %

31.12.2016

ex 5005 00 10

ex 5005 00 90

10

10

Yarn spun entirely from silk waste (noil), not put up for retail sale

0 %

31.12.2018

ex 5205 31 00

10

Six ply yarn of bleached cotton, measuring 925 dtex or more but not more than 989 dtex per single yarn, for the manufacture of tampons (1)

0 %

31.12.2018

5208 11 10

 

Fabrics for the manufacture of bandages, dressings and medical gauzes

5,2 %

31.12.2018

ex 5402 45 00

20

Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid

0 %

31.12.2018

ex 5402 47 00

10

Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1 650 decitex or more but not more than 1 800 decitex, consisting of 110 filaments or more but not more than 120 filaments, each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75 % or more but not more than 77 % of poly(ethylene terephthalate), for use in the manufacture of roofings (1)

0 %

31.12.2016

ex 5402 47 00

20

Bicomponent monofilament yarn of not more than 30 dtex, consisting of:

—

a poly(ethylene terephthalate) core, and

—

an outer layer of a copolymer of poly(ethyleneterephthalate) and poly(ethyleneisophthalate),

for use in the manufacture of filtration fabrics (1)

0 %

31.12.2015

ex 5402 49 00

30

Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures (1)

0 %

31.12.2018

ex 5402 49 00

50

Non-textured filament yarn of poly(vinyl alcohol)

0 %

31.12.2018

ex 5402 49 00

70

Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1 000 continuous filaments or more but not more than 25 000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn (1)

0 %

31.12.2018

ex 5404 19 00

20

Monofilament of poly(1,4-dioxanone)

0 %

31.12.2018

ex 5404 19 00

30

Unsterilised monofilament of a copolymer of 1,3-dioxan-2-one with 1,4-dioxan-2,5-dione, for the manufacture of surgical sutures (1)

0 %

31.12.2014

ex 5404 19 00

50

Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers (1)

0 %

31.12.2018

ex 5404 90 90

20

Strip of polyimide

0 %

31.12.2018

ex 5407 10 00

10

Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′–oxybis (phenyleneamine)

0 %

31.12.2017

ex 5503 11 00

ex 5601 30 00

10

40

Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine), of a length of not more than 7 mm

0 %

31.12.2018

ex 5503 40 00

10

Hollow polypropylene staple fibres:

—

measuring 6 decitex or more but not more than 10 decitex,

—

of a strength of 3,5 cN/dtex or more

—

of a diameter of 30 μm or more

for use in the manufacture of napkins and napkin liners for babies and other sanitary products (1)

0 %

31.12.2016

ex 5503 90 00

ex 5506 90 00

ex 5601 30 00

20

10

10

Poly(vinyl alcohol) fibres, whether or not acetalized

0 %

31.12.2018

ex 5603 11 10

ex 5603 11 90

ex 5603 12 10

ex 5603 12 90

ex 5603 91 10

ex 5603 91 90

ex 5603 92 10

ex 5603 92 90

10

10

10

10

10

10

10

10

Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:

—

of a thickness of 200 μm or more but not more than 280 μm and

—

of a weight of 20g/m2 or more but not more than 50g/m2

0 %

31.12.2018

ex 5603 11 10

ex 5603 11 90

20

20

Non-wovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 μm but not more than 20 μm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 μm but not more than 5 μm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins (1)

0 %

31.12.2017

ex 5603 12 90

ex 5603 13 90

ex 5603 14 90

ex 5603 92 90

ex 5603 93 90

ex 5603 94 90

30

30

10

60

40

30

Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles

0 %

31.12.2018

ex 5603 12 90

50

Non-woven:

—

weighing 30 g/m2 or more, but not more than 60 g/m2,

—

containing fibres of polypropylene or of polypropylene and polyethylene,

—

whether or not printed, with:

—

on one side, 65 % of the total surface area having circular bobbles of 4mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded,

—

and on other side a smooth untextured surface,

for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles (1)

0 %

31.12.2017

ex 5603 12 90

ex 5603 13 90

60

60

Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 s or more but not more than 36 s (as determined by the ISO 5636/5 method)

0 %

31.12.2018

ex 5603 12 90

ex 5603 13 90

ex 5603 92 90

ex 5603 93 90

70

70

40

10

Non-wovens of polypropylene,

—

with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene,

—

with a weight of not more than 150 g/m2,

—

in the piece or simply cut into squares or rectangles, and

—

not impregnated

0 %

31.12.2018

ex 5603 13 10

ex 5603 14 10

10

10

Electrically nonconductive nonwovens, consisting of a central film of poly(ethylene terephthalate) laminated on each side with unidirectionally aligned fibres of poly(ethylene terephthalate), coated on both sides with high grade temperature resistant electrical nonconductive resin, weighing 147 g/m2 or more but not more than 265 g/m2, with non-isotropic tensile strength on both directions, to be used as electrical insulation material

0 %

31.12.2018

ex 5603 13 10

20

Non-woven of spunbonded polyethylene, with a coating,

—

of a weight of more than 80 g/m2 but not more than 105 g/m2 and

—

an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)

0 %

31.12.2015

ex 5603 14 90

40

Non-wovens, consisting of poly(ethylene terephthlate) spun bonded media:

—

of weight of 160 g/m2 or more but not more than 300 g/m2,

—

whether or not laminated on one side with a membrane or a membrane and aluminium

of a kind used for the manufacture of industrial filters

0 %

31.12.2018

ex 5603 92 90

ex 5603 93 90

20

20

Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene

0 %

31.12.2018

ex 5603 92 90

ex 5603 94 90

70

40

Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene

0 %

31.12.2018

ex 5603 92 90

ex 5603 93 90

80

50

Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:

—

a weight of 25 g/m2 or more but not more than 150 g/m2,

—

in the piece or simply cut into squares or rectangles,

—

not impregnated,

—

with cross-directional or machine-directional stretch properties

for use in the manufacture of infant/child care products (1)

0 %

31.12.2016

ex 5603 94 90

20

Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips (1)

0 %

31.12.2018

ex 5607 50 90

10

Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures (1)

0 %

31.12.2014

ex 5803 00 10

91

Gauze of cotton, of a width of less than 1 500 mm

0 %

31.12.2018

ex 5903 10 90

ex 5903 20 90

ex 5903 90 99

10

10

20

Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres

0 %

31.12.2018

ex 5906 99 90

10

Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4′-oxybis(phenyleneamine)

0 %

31.12.2018

ex 5907 00 00

10

Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm

0 %

31.12.2016

ex 5911 10 00

10

Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products (1)

0 %

31.12.2018

ex 5911 90 90

ex 8421 99 00

30

92

Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more

0 %

31.12.2018

ex 5911 90 90

40

Multi-layered non-woven polyester polishing pads, impregnated with polyurethane

0 %

31.12.2014

ex 6813 89 00

10

Friction material, of a thickness of less than 20 mm, not mounted, for the manufacture of friction components of a kind used in automatic transmissions and clutches (1)

0 %

31.12.2018

ex 6814 10 00

10

Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres, for use in the manufacture of insulation products for high voltage applications (1)

0 %

31.12.2018

ex 6903 90 90

20

Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials

0 %

31.12.2018

ex 6909 19 00

15

Ceramic ring with rectangular transversal section having an external diameter of 19 mm or more (+ 0,00 mm/– 0,10 mm) but not more than 29 mm (+ 0,00 mm/– 0,20 mm), an internal diameter of 10 mm or more (+ 0,00 mm/– 0,20 mm) but not more than 19 mm (+ 0,00 mm/-0,30 mm), a thickness variable from 2 mm (± 0,10 mm) to 3,70 mm (± 0,20 mm) and heat resistance 240 °C or more, containing by weight:

—

90 % (± 1,5 %) of aluminium oxide

—

7 % (± 1 %) of titanium oxide

0 %

31.12.2017

ex 6909 19 00

20

Silicon nitride (Si3N4) rollers or balls

0 %

31.12.2015

ex 6909 19 00

30

Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end

0 %

31.12.2018

ex 6909 19 00

ex 6914 90 00

50

20

Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:

—

2 % or more of diboron trioxide,

—

28 % or less of silicon dioxide and

—

60 % or more of dialuminium trioxide

0 %

31.12.2018

ex 6909 19 00

60

Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end

0 %

31.12.2018

ex 6909 19 00

70

Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section

0 %

31.12.2018

ex 6909 19 00

80

Ceramic heat sinks, containing by weight:

—

66 % or more of silicon carbide,

—

15 % or more of aluminium oxide

for maintaining the operating temperature of transistors, diodes and integrated circuits in products of headings 8521 or 8528 (1)

0 %

31.12.2016

ex 6914 90 00

30

Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm

0 %

31.12.2018

ex 7005 10 30

10

Float glass:

—

of a thickness of 4,0 mm or more but not more than 4,2 mm,

—

with a light transmission of 91 % or more measured using a D-type light source,

—

coated on one surface with a fluorine doped tin dioxide reflective layer

0 %

31.12.2017

ex 7006 00 90

70

Float glass:

—

with a thickness of 1,7 mm or more but not more than 1,9 mm,

—

with light transmission of 91 % or more, measured with a D-type light source,

—

coated on one side with fluorine-doped tin dioxide as a reflecting layer,

—

with worked edges

0 %

31.12.2016

ex 7007 19 20

10

Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides, for use in the manufacture of products falling within heading 8528 (1)

0 %

31.12.2018

ex 7007 29 00

10

Glass plate of a diagonal size of 81,28 cm (± 1,5 cm) or more, but not more than 185,42 cm (± 1,5 cm), consisting of 2 sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides

0 %

31.12.2018

ex 7009 10 00

10

Electro-cromic auto-dimming glass for motor vehicle mirrors:

—

whether or not equipped with plastic backing plate,

—

whether or not equipped with a heating element,

—

whether or not equipped with Blind Spot Module (BSM) display

0 %

31.12.2017

ex 7009 91 00

10

Unframed glass mirrors with:

—

a length of 1 516 mm (± 1 mm);

—

a width of 553 mm (± 1 mm);

—

a thickness of 3 mm (± 0,1 mm);

—

the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11 mm or more but not more than 0,13 mm;

—

a lead content of not more than 90 mg/kg and

—

a corrosion resistance of 72 hours or more according to ISO 9227 salt spray test

0 %

31.12.2015

7011 20 00

 

Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for cathode ray tubes

0 %

31.12.2018

ex 7014 00 00

10

Optical elements of glass (other than those of heading 7015), not optically worked, other than signalling glassware

0 %

31.12.2018

ex 7019 12 00

ex 7019 12 00

01

21

Rovings, measuring 2 600 tex or more but not more than 3 300 tex and of a loss on ignition of 4 % or more but not more than 8 % by weight (as determined by the ASTM D 2584-94 method)

0 %

31.12.2018

ex 7019 12 00

ex 7019 12 00

02

22

Rovings, measuring 650 tex or more but not more than 2 500 tex, coated with a layer of polyurethane whether or not mixed with other materials

0 %

31.12.2018

ex 7019 12 00

ex 7019 12 00

03

23

Rovings, measuring 392 tex or more but not more than 2 884 tex, coated with a layer of an acrylic copolymer

0 %

31.12.2018

ex 7019 12 00

ex 7019 12 00

05

25

Rovings ranging from 1 980 to 2 033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)

0 %

31.12.2017

ex 7019 19 10

10

Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers

0 %

31.12.2018

ex 7019 19 10

15

S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (– 1 μm / + 1,5 μm)

0 %

31.12.2017

ex 7019 19 10

20

Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate

0 %

31.12.2015

ex 7019 19 10

25

Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate

0 %

31.12.2015

ex 7019 19 10

30

Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate

0 %

31.12.2014

ex 7019 19 10

50

Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 percent by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated

0 %

31.12.2016

ex 7019 19 10

55

Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of:

—

9 % or more but not more than 16 % of magnesium oxide,

—

19 % or more but not more than 25 % of aluminium oxide,

—

0 % or more but not more than 2 % of boron oxide,

—

without calcium oxide,

coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene

0 %

31.12.2014

ex 7019 19 10

ex 7019 90 00

60

30

High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)

0 %

31.12.2018

ex 7019 19 10

ex 7019 90 00

70

20

Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)

0 %

31.12.2018

ex 7019 19 10

ex 7019 90 00

80

40

Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene

0 %

31.12.2018

ex 7019 39 00

50

Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts (1)

0 %

31.12.2016

ex 7019 40 00

10

Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30 °C and 120 °C (measured according to IPC-TM-650) of:

—

10ppm per °C or more but not more than 12ppm per °C in the length and width, and

—

20ppm per °C or more but not more than 30ppm per °C in the thickness, with a glass transition temperature of 152 °C or more but not more than 153 °C (measured according IPC-TM-650)

0 %

31.12.2018

ex 7019 90 00

10

Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate

0 %

31.12.2018

ex 7020 00 10

ex 7616 99 90

10

77

Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body

0 %

31.12.2016

ex 7201 10 11

10

Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm

0 %

31.12.2016

ex 7201 10 30

10

Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon

0 %

31.12.2016

7202 50 00

 

Ferro-silico-chromium

0 %

31.12.2018

ex 7202 99 80

10

Ferro-dysprosium, containing by weight:

—

78 % or more of dysprosium, and

—

18 % or more but not more than 22 % of iron

0 %

31.12.2015

ex 7318 14 99

ex 7318 14 99

20

29

Rock bolt:

—

being a self-tapping screw,

—

with a length of more than 300 mm,

of a kind used for support of mines

0 %

31.12.2016

ex 7320 90 10

91

Flat spiral spring of tempered steel, with:

—

a thickness of 2,67 mm or more, but not more than 4,11 mm,

—

a width of 12,57 mm or more, but not more than 16,01 mm,

—

a torque of 18,05 Nm or more, but not more than 73,5 Nm

—

an angle between the free position and the nominal position in exercise of 76 ° or more, but not more than 218 °

for use in the manufacture of tensioners for power transmission belts, for internal combustion engines (1)

0 %

31.12.2018

ex 7325 99 10

20

Anchor head of hot dipped galvanized ductile cast iron of the kind used in the production of earth anchors

0 %

31.12.2014

ex 7326 20 00

20

Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,017 mm or more but not more than 0,070 mm, compacted by sintering and rolling

0 %

31.12.2016

ex 7410 11 00

ex 8507 90 80

ex 8545 90 90

10

60

30

Roll of laminate foil of graphite and copper, with:

—

a width of 610 mm or more but not more than 620 mm, and

—

a diameter of 690 mm or more but not more than 710 mm,

for use in the manufacture of lithium-ion electric vehicle batteries (1)

0 %

31.12.2016

ex 7410 21 00

10

Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil

0 %

31.12.2018

ex 7410 21 00

30

Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil

0 %

31.12.2018

ex 7410 21 00

40

Sheet or plates:

—

consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or

—

consisting of multiple layers of paper, impregnated with phenolic resin,

coated on one or both sides with a copper film with a maximum thickness of 0,15 mm

0 %

31.12.2018

ex 7410 21 00

50

Plates:

—

consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,

—

covered on one or both sides with copper foilwith a thickness of not more than 0,15mm and

—

with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10GHz, as measured according to IPC-TM-650

0 %

31.12.2018

ex 7410 21 00

60

Plates, rolls and sheets of synthetic or artificial resin:

—

with a maximum thickness of not more than 25 μm,

—

coated on both sides with a copper film with a maximum thickness of 0,15mm,

—

with a minimum capacitance of 1,09pF/mm2,

for use in the manufacture of circuit boards (1)

0 %

31.12.2018

ex 7410 21 00

70

Plates, rolls or sheets:

—

with at least one layer of woven glass fibre, impregnated with a fire-retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 170 °C (according to IPC-TM-650, method 2.4.25),

—

coated on one or both sides with a copper film with a thickness of not more than 0,15 mm,

for use in the manufacture of circuit boards (1)

0 %

31.12.2018

ex 7419 99 90

ex 7616 99 90

91

60

Disc (target) with deposition material, consisting of molybdenum silicide:

—

containing 1 mg/kg or less of sodium and

—

mounted on a copper or aluminium support

0 %

31.12.2018

7601 20 20

 

Slabs and billets of unwrought aluminium alloys

4 %

31.12.2018

ex 7601 20 20

10

Slabs and billets of aluminium alloy containing lithium

0 %

31.12.2017

ex 7604 21 00

ex 7604 29 90

10

30

Profiles made of aluminium alloy conforming to EN standard AW-6063 T5

—

anodized

—

whether or not lacquered

—

with a wall thickness of 0,5 mm (± 1,2 %) or more but not more than 0,8 mm (± 1,2 %)

for use in the manufacture of goods of heading 8302 (1)

0 %

31.12.2018

ex 7604 29 10

ex 7606 12 99

10

20

Sheets and bars of aluminium-lithium alloys

0 %

31.12.2015

ex 7605 19 00

10

Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm

0 %

31.12.2018

ex 7606 12 92

ex 7607 11 90

20

20

Aluminium and magnesium alloy strip:

—

in rolls,

—

of a thickness of 0,14 mm or more but not more than 0,40 mm,

—

a width of 12,5 mm or more but not more than 359 mm,

—

a tensile strength of 285 N/mm2 or more, and

—

an elongation at break of 1 % or more, and

containing by weight:

—

93,3 % or more of aluminium,

—

2,2 % or more but not more than 5 % of magnesium, and

—

not more than 1,8 % of other elements

0 %

31.12.2017

ex 7607 11 90

10

Plain aluminium foil with the following parameters:

—

an aluminium content of 99,98 % or more

—

a thickness of 0,070 mm or more but not more than 0,125 mm

—

with a cubic texture

of a kind used for high voltage etching (1)

0 %

31.12.2016

ex 7607 11 90

40

Aluminium foil in rolls:

—

having a purity of 99,99 % by weight,

—

of a thickness of 0,021 mm or more but not more than 0,2 mm,

—

with a width of 500 mm,

—

with a surface oxide layer by 3 to 4 nm thick,

—

and with a cubic texture of more than 95 %

0 %

31.12.2016

ex 7607 19 90

ex 8507 90 80

10

80

Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:

—

a width of 595 mm or more but not more than 605 mm, and

—

a diameter of 690 mm or more but not more than 710 mm,

for use in the manufacture of cathodes for lithium-ion electric vehicle batteries (1)

0 %

31.12.2016

ex 7607 20 90

10

Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries (1)

0 %

31.12.2017

ex 7607 20 90

20

Lubricating entry sheet of a total thickness of not more than 350 μm, comprising of:

—

a layer of aluminium foil of a thickness of 70 μm or more but not more than 150 μm,

—

a water soluble lubricant of a thickness of 20 μm or more but not more than 200 μm and solid at room temperature

0 %

31.12.2015

ex 7613 00 00

20

Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg

0 %

31.12.2018

ex 7616 99 90

15

Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts

0 %

31.12.2018

ex 7616 99 90

ex 8482 80 00

ex 8803 30 00

70

10

40

Connecting components for use in the production of helicopter tail rotor shafts (1)

0 %

31.12.2016

ex 7616 99 90

75

Parts in the shape of a rectangular frame:

—

of painted aluminium,

—

with a length of 1 011 mm or more but not more than 1 500 mm,

—

with a width of 622 mm or more but not more than 900 mm,

—

with a thickness of 0,6 mm (± 0,1 mm),

of a kind used in the manufacture of TV sets

0 %

31.12.2017

ex 8102 10 00

10

Molybdenum powder with:

—

a purity by weight of 99 % or more and

—

a particle size of 1,0 μm or more, but not more than 5,0 μm

0 %

31.12.2017

8104 11 00

 

Unwrought magnesium, containing at least 99,8 % by weight of magnesium

0 %

31.12.2018

ex 8104 30 00

30

Magnesium powder:

—

of purity by weight of 99,5 % or more,

—

with a particle size of 0,2 mm or more but not more than 0,8 mm

0 %

31.12.2015

ex 8104 90 00

10

Ground and polished magnesium sheets, of dimensions not more than 1 500 mm × 2 000 mm, coated on one side with an epoxy resin insensitive to light

0 %

31.12.2018

ex 8105 90 00

10

Bars or wires made of cobalt alloy containing, by weight:

—

35 % (± 2 %) cobalt,

—

25 % (± 1 %) nickel,

—

19 % (± 1 %) chromium and

—

7 % (± 2 %) iron

conforming to the material specifications AMS 5842, of a kind used in the aerospace industry

0 %

31.12.2017

ex 8108 20 00

10

Titanium sponge

0 %

31.12.2018

ex 8108 20 00

30

Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm

0 %

31.12.2018

ex 8108 30 00

10

Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium

0 %

31.12.2018

ex 8108 90 30

10

Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 65040

0 %

31.12.2014

ex 8108 90 30

20

Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708 92 or 8714 10 00 (1)

0 %

31.12.2017

ex 8108 90 30

30

Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928 and 4967

0 %

31.12.2015

ex 8108 90 30

40

Wire of an titanium alloy containing by weight:

—

22 % (± 3 %) of vanadium and

—

4 % (± 0,5 %) of aluminium

0 %

31.12.2016

ex 8108 90 50

10

Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1 000 mm or more but not more than 1 254 mm, for the manufacture of goods of subheading 8714 10 00 (1)

0 %

31.12.2018

ex 8108 90 50

30

Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of:

—

exhaust systems for internal combustion engines or

—

tubes and pipes of subheading 8108 90 60 (1)

0 %

31.12.2017

ex 8108 90 50

50

Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium

0 %

31.12.2017

ex 8108 90 50

60

Plates, sheets, strips and foils of an alloy of titanium, aluminium, silicon and niobium, containing by weight:

—

0,4 % or more but not more than 0,6 % of aluminium,

—

0,35 % or more but not more than 0,55 % of silicon and

—

0,1 % or more but not more than 0,3 % of niobium

0 %

31.12.2018

ex 8108 90 50

70

Strip of an alloy of titanium, containing by weight:

—

15 % (± 1 %) of vanadium

—

3 % (± 0,5 %) of chromium

—

3 % (± 0,5 %) of tin and

—

3 % (± 0,5 %) of aluminium

0 %

31.12.2016

ex 8108 90 50

75

Plates, sheets, strips and foil of titanium alloy, containing by weight:

—

0,3 % or more but not more than 0,7 % of aluminium and

—

0,25 % or more but not more than 0,6 % of silicon

0 %

31.12.2016

ex 8108 90 50

85

Plates, sheets, strip and foil of non-alloyed titanium

0 %

31.12.2017

ex 8108 90 90

ex 9003 90 00

20

10

Parts of spectacle frames and mountings, including bolts of the kind used for spectacle frames and mountings, of an alloy of titanium

0 %

31.12.2016

ex 8109 20 00

10

Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry (1)

0 %

31.12.2018

ex 8110 10 00

10

Antimony in the form of ingots

0 %

31.12.2018

ex 8112 99 30

10

Alloy of niobium (columbium) and titanium, in the form of bars and rods

0 %

31.12.2018

ex 8113 00 20

10

Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide

0 %

31.12.2016

ex 8113 00 90

10

Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits

0 %

31.12.2017

ex 8207 30 10

10

Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles (1)

0 %

31.12.2017

ex 8301 60 00

ex 8413 91 00

ex 8419 90 85

ex 8438 90 00

ex 8468 90 00

ex 8476 90 00

ex 8479 90 80

ex 8481 90 00

ex 8503 00 99

ex 8515 90 00

ex 8531 90 85

ex 8536 90 85

ex 8543 90 00

ex 8708 91 99

ex 8708 99 97

ex 9031 90 85

10

20

20

10

10

10

87

20

45

20

20

96

50

10

30

30

Keypads, wholly of either silicone or polycarbonate, including printed keys with electrical contacting elements

0 %

31.12.2015

ex 8309 90 90

10

Aluminium can ends with so-called "ring pull" full aperture with a diameter of 136,5 mm (± 1 mm)

0 %

31.12.2018

ex 8401 30 00

20

Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors (1)

0 %

31.12.2018

ex 8405 90 00

ex 8708 21 10

ex 8708 21 90

10

10

10

Metal casing for automobile safety belt pre-tension gas generators

0 %

31.12.2014

ex 8407 33 20

ex 8407 33 80

ex 8407 90 80

ex 8407 90 90

10

10

10

10

Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of:

—

self-propelled lawn mowers with a seat of subheading 8433 11 51, and hand-operated lawn mowers of heading 8433 11 90,

—

tractors of subheading 8701 90 11, whose main function is that of a lawn mower,

—

four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 8433 20 10 or

—

snowploughs and snow blowers of subheading 8430 20 (1)

0 %

31.12.2017

ex 8407 90 10

10

Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of lawnmowers of subheading 8433 11, mowers with motor of subheading 8433 20 10, rotovators of subheading 8432 29 50, garden shredders of subheading 8436 80 90 or scarifiers of subheading 8432 29 10 (1)

0 %

31.12.2016

ex 8407 90 90

20

Compact Liquid Petroleum Gas (LPG) Engine System, with:

—

6 cylinders,

—

an output of 75 kW or more, but not more than 80 kW,

—

inlet and exhaust valves modified to operate continuously in heavy duty applications,

for use in the manufacture of vehicles of heading 8427 (1)

0 %

31.12.2015

ex 8408 90 41

20

Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)

0 %

31.12.2018

ex 8408 90 43

20

Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)

0 %

31.12.2018

ex 8408 90 43

ex 8408 90 45

ex 8408 90 47

30

20

30

4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:

—

a capacity of not more than 3 850 cm3, and

—

a rated output of 15 kW or more but not more than 55 kW,

for use in the manufacture of vehicles of heading 8427 (1)

0 %

31.12.2017

ex 8408 90 47

40

4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:

—

a capacity of not more than 3 850 cm3,

—

a rated output of 55 kW or more but not more than 85 kW,

for use in the manufacture of vehicles of heading 8427 (1)

0 %

31.12.2018

ex 8409 91 00

ex 8409 99 00

10

20

Exhaust manifold complying with standard DIN EN 13835, whether or not with turbine housing, with four inlet ports, for use in the manufacture of exhaust manifold that is turned, milled, drilled and/or processed by other means (1)

0 %

31.12.2016

ex 8409 99 00

ex 8479 90 80

10

85

Injectors with solenoid valve for optimised atomisation in the engine combustion chamber

0 %

31.12.2016

ex 8411 99 00

30

Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:

—

of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686,

—

with a heat-resistance of not more than 1 100 °C;

—

with a diameter of 30 mm or more, but not more than 80 mm;

—

with a height of 30 mm or more, but not more than 50 mm

0 %

31.12.2017

ex 8411 99 00

40

Spiral-shaped gas turbine turbocharger component:

—

of a stainless alloy,

—

with a heat-resistance of not more than 1 050 °C,

—

with a diameter of 100 mm or more, but not more than 200 mm,

—

with a height of 100 mm or more, but not more than 150 mm,

—

whether or not with an engine exhaust manifold

0 %

31.12.2018

ex 8411 99 00

50

Actuator for a single-stage turbocharger:

—

with a built-in conducting horn and connecting sleeve,

—

of a stainless steel alloy,

—

with conducting horns having an operating distance of 20 mm,

—

with a length of not more than 350 mm,

—

with a diameter of not more than 75 mm,

—

with a height of not more than 50 mm

0 %

31.12.2018

ex 8413 70 35

20

Single phase centrifugal pump:

—

discharging at least 400 cm3 fluid per minute,

—

with a noise level limited to 6 dBA,

—

with the inside diameter of the suction opening and discharge outlet of not more than 15 mm, and

—

working at ambient temperatures down to -10 °C

0 %

31.12.2015

ex 8414 30 81

50

Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment

0 %

31.12.2014

ex 8414 30 89

20

Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW

0 %

31.12.2018

ex 8414 59 20

30

Axial fan:

—

with an electric motor,

—

of an output of not more than 125 W

for use in the manufacture of computers (1)

0 %

31.12.2018

ex 8414 59 20

40

Axial fan with an electric motor, of an output of not more than 2 W, for use in the manufacture of products of heading 8521 or 8528 (1)

0 %

31.12.2015

ex 8414 59 80

ex 8414 90 00

40

60

Cross-flow fan with:

—

a height of 575 mm (± 1,0 mm) or more, but not more than 850 mm (± 1,0 mm),

—

a diameter of 95mm (± 0,6 mm) or 102 mm (± 0,6 mm),

—

an anti-static, anti-bacterial and heat-resistant, 30 % glass fibre reinforced plastic raw material that has a minimum temperature resistance of 70 °C (± 5 °C),

for use in the manufacture of indoor units of split-type air conditioning machines (1)

0 %

31.12.2016

ex 8414 90 00

20

Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles (1)

0 %

31.12.2014

ex 8414 90 00

30

Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles (1)

0 %

31.12.2018

ex 8414 90 00

40

Drive part, for compressors of air conditioning machines of motor vehicles (1)

0 %

31.12.2018

ex 8415 90 00

20

Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles (1)

0 %

31.12.2016

ex 8418 99 10

50

Evaporator composed of aluminium fins and a copper coil of the kind used in refrigeration equipment

0 %

31.12.2014

ex 8418 99 10

60

Condenser composed of two concentric copper tubes of the kind used in refrigeration equipment

0 %

31.12.2014

ex 8421 99 00

91

Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder

0 %

31.12.2018

ex 8421 99 00

93

Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300 mm or more but not more than 3 700 mm and a diameter of not more than 500 mm

0 %

31.12.2018

ex 8422 30 00

ex 8479 89 97

10

30

Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges (1)

0 %

31.12.2018

ex 8424 90 00

30

Containers of poly(ethylene terephthalate), with a content of 50 ml or more but not more than 600 ml, equipped with a nozzle, of a kind used as a part of mechanical appliances for spraying liquids

0 %

31.12.2018

ex 8431 20 00

30

Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427 (1)

0 %

31.12.2017

ex 8439 99 00

10

Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3 000 mm or more and an external diameter of 550 mm or more

0 %

31.12.2018

ex 8467 99 00

ex 8536 50 11

10

35

Mechanical switches for connecting electrical circuits, with:

—

a voltage of 14,4 V or more but not more than 42 V,

—

an amperage of 10 A or more but not more than 42 A,

for use in the manufacture of machines falling within heading 8467 (1)

0 %

31.12.2014

ex 8477 80 99

10

Machines for casting or for surface modification of plastic membranes of heading 3921

0 %

31.12.2018

ex 8479 89 97

40

Isobaric pressure exchanger with a flow rate of not more than 50 m3/h, whether or not with a booster pump

0 %

31.12.2014

ex 8479 89 97

ex 8479 90 80

50

80

Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line (1)

0 %

31.12.2015

ex 8481 30 91

91

Steel check (non-return) valves with:

—

an opening pressure of not more than 800 kPa

—

an external diameter not more than 37 mm

0 %

31.12.2014

ex 8481 80 59

10

Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines

0 %

31.12.2018

ex 8481 80 69

60

Four-way reversing valve for refrigerants, consisting of:

—

a solenoid pilot valve

—

a brass valve body including valve slider and copper connections

with a working pressure up to 4,5 MPa

0 %

31.12.2017

ex 8481 80 79

20

Solenoid valve device that can withstand a pressure of 875 bar

0 %

31.12.2018

ex 8481 80 99

50

Service valve, consisting a combination of a two way valve on the liquid line and a three way valve on the gas line with:

—

a minimum enclosing pressure of 30 kgf/cm2,

—

a minimum withstanding pressure of 45 kgf/cm2,

for use in the manufacture of outdoor air conditioning units (1)

0 %

31.12.2016

ex 8481 80 99

60

our way valve, consisting of:

—

a core plunger,

—

a sealing plunger,

—

a 220 V-240 V AC 50/60 Hz solenoid coil,

—

a working pressure up to 4,3 MPa,

—

a housing

for directing the flow of the refrigerant, for use in the manufacture of outdoor air conditioning units (1)

0 %

31.12.2016

ex 8483 30 38

30

Cylindrical bearing housing:

—

of precision-cast grey cast iron complying with standard DIN EN 1561,

—

with oil chambers,

—

without bearings,

—

with a diameter of 60 mm or more, but not more than 180 mm,

—

with a height of 60 mm or more, but not more than 120 mm,

—

whether or not with water chambers and connectors

0 %

31.12.2017

ex 8483 40 29

50

Gear set of cycloid gear type with:

—

a rated torque of 50 Nm or more but not more than 7 000 Nm,

—

standard ratios of 1:50 or more but not more than 1:270,

—

lost motion of not more than one arc minute,

—

an efficiency of more than 80 %,

of a kind used in robot arms

0 %

31.12.2016

ex 8483 40 29

60

Epicyclic gearing, of a kind used in driving hand-held power tools with:

—

a rated torque of 25 Nm or more, but not more than 70 Nm,

—

standard gear ratios of 1:12.7 or more, but not more than 1:64.3

0 %

31.12.2018

ex 8483 40 51

20

Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 (1)

0 %

31.12.2018

ex 8483 40 59

20

Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 (1)

0 %

31.12.2018

ex 8483 40 90

80

Transmission gearbox, with:

—

not more than 3 gears,

—

an automatic deceleration system and

—

a power reversal system,

for use in the manufacture of goods of heading 8427 (1)

0 %

31.12.2015

ex 8501 10 99

54

DC motor, brushless, with an external diameter of not more than 25,4 mm, a rated speed of 2 260 (± 15 %) rpm or 5 420 (± 15 %) rpm, a supply voltage of 1,5 V or 3 V

0 %

31.12.2018

ex 8501 10 99

60

DC motor:

—

with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded

—

with a power supply voltage of 100 V or more but not more than 240 V

for use in the manufacture of electric fryers (1)

0 %

31.12.2017

ex 8501 10 99

79

DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least – 20 °C to + 70 °C

0 %

31.12.2018

ex 8501 10 99

80

DC stepping motor, with:

—

an angle of step of 7,5 ° (± 0,5 °),

—

a pull-out torque at 25 °C of 25 mNm or more,

—

a pull-out pulse rate of 1 960 pps or more,

—

a two-phase winding, and

—

a rated voltage of 10,5 V or more, but not more than 16,0 V

0 %

31.12.2018

ex 8501 10 99

81

DC stepping motor, with an angle of step of 18 ° or more, a holding torque of 0,5 mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22 mm × 68 mm, a two phase winding and an output of not more than 5 W

0 %

31.12.2018

ex 8501 10 99

82

DC motor, brushless, with an external diameter of not more than 29 mm, a rated speed of 1 500 (± 15 %) rpm or 6 800 (± 15 %) rpm, a supply voltage of 2 V or 8 V

0 %

31.12.2014

ex 8501 31 00

30

DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2,23 Nm (± 1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1 550 rpm (± 350 rpm) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor) (1)

0 %

31.12.2016

ex 8501 31 00

40

Permanently excited DC motor with

—

a multiple-phase winding,

—

an external diameter of 30 mm or more but not more than 80 mm,

—

a rated speed of not more than 15 000 rpm,

—

an output of 45 W or more but not more than 300 W and

—

a supply voltage of 9 V or more but not more than 25 V

0 %

31.12.2014

ex 8501 31 00

45

DC motors, brushless, with:

—

an external diameter of 90 mm or more, but not more than 110 mm,

—

a rated speed of not more than 3 680 rpm,

—

an output of 600 W or more but not more than 740 W at 2 300 rpm and at 80 °C,

—

a supply voltage of 12 V,

—

a torque of not more than 5,67 Nm,

—

a rotor position sensor,

—

an electronic star-point relay, and

—

for use with an electric power steering control module

0 %

31.12.2018

ex 8501 31 00

55

DC motor with commutator, with

—

an external diameter of 27,5 mm or more, but not more than 45 mm,

—

a rated speed of 11 000 rpm or more, but not more than 23 200 rpm,

—

a rated supply voltage of 3.6 V or more, but not more than 230 V,

—

an output power of not more than 529 W,

—

a free load current of not more than 3.1 A,

—

a maximum efficiency of 54 % or more,

for driving hand-held power tools

0 %

31.12.2018

ex 8501 31 00

60

Brushless DC motor that can revolve counter clockwise (CCW), with:

—

an input voltage of 264 V or more, but not more than 391 V,

—

an external diameter of 81 mm (± 2,5 mm) or more, but not more than 150 mm (± 0,8 mm),

—

an output power of not more than 125 W,

—

E or B class winding insulation,

for use in the manufacture of indoor or outdoor units of split-type air conditioning machines (1)

0 %

31.12.2016

ex 8501 31 00

65

Fuel cell module containing at least polymer electrolyte membrane fuel cells in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems (1)

0 %

31.12.2018

ex 8501 31 00

70

DC motors, brushless, with:

—

an external diameter of 80 mm or more, but not more than 100 mm,

—

a supply voltage of 12 V,

—

an output at 20 °C of 300 W or more, but not more than 550 W,

—

a torque 20 °C of 2,90 Nm or more, but not more than 5,30 Nm,

—

a rated speed at 20 °C of 600 rpm or more, but not more than 1 200 rpm,

—

equipped with the rotor angle position sensor of resolver type or Hall effect type,

of the kind used in power steering systems for cars

0 %

31.12.2017

ex 8501 33 00

ex 8501 40 80

ex 8501 53 50

30

50

10

Electric drive for motor vehicles, with an output of not more than 315 kW, with:

—

an AC or DC motor whether or not with transmission,

—

power electronics

0 %

31.12.2016

ex 8501 51 00

ex 8501 52 20

30

50

AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000 rpm, with:

—

an output of 340 W or more but not more than 7,4 kW,

—

a flange of dimensions of not more than 180 mm × 180 mm, and

—

a length from flange to extreme end of resolver of not more than 271 mm

0 %

31.12.2016

ex 8501 62 00

30

Fuel cell system

—

consisting of at least phosphoric acid fuel cells,

—

in a housing with integrated water management and gas treatment,

—

for permanent, stationary energy supply

0 %

31.12.2017

ex 8503 00 91

ex 8503 00 99

31

32

Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring

0 %

31.12.2018

ex 8503 00 99

31

Stamped collector of an electric motor, having an external diameter of not more than 16 mm

0 %

31.12.2018

ex 8503 00 99

33

Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm

0 %

31.12.2016

ex 8503 00 99

34

Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm

0 %

31.12.2016

ex 8503 00 99

35

Transmitter resolver for brushless motors of electrical power steering

0 %

31.12.2014

ex 8503 00 99

40

Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, of a kind used for manufacture of fuel cells in heading 8501

0 %

31.12.2017

ex 8504 31 80

20

Transformer for use in the manufacture of inverters in LCD modules (1)

0 %

31.12.2017

ex 8504 31 80

30

Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters (1)

0 %

31.12.2018

ex 8504 31 80

40

Electrical transformers:

—

with a capacity of 1 kVA or less

—

without plugs or cables,

for internal use in the manufacture of set top boxes and TVs (1)

0 %

31.12.2017

ex 8504 40 82

40

Printed circuit board equipped with a bridge rectifier circuit and other active and passive components:

—

with two output connectors

—

with two input connectors which are available and useable in parallel

—

able to switch between bright and dimmed operation mode

—

with an input voltage of 40 V (+ 25 % – 15 %) or 42 V (+ 25 % – 15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or

—

with an input voltage of 230 V (+ 20 % – 15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or

—

with an input voltage of 120 V (15 % – 35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode

—

with an input current reaching 80 % of its nominal value within 20 ms

—

with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions

—

with an maximum inrush current overshoot of not more than 250 % of the input current

—

with a period of the inrush current overshoot of not more than 100 ms

—

with an input current undershoot of not less than 50 % of the input current

—

with a period of the inrush current undershoot of not more than 20 ms

—

with a presettable output current

—

with an output current reaching 90 % of its nominal pre-set value within 50 ms

—

with an output current reaching zero within 30 ms after removal of the input voltage

—

with an defined failure status in case of no-load or too-high load (end-of-life function)

0 %

31.12.2017

ex 8504 40 82

50

Rectifier in a housing with

—

a rated power of not more than 250 W

—

an input voltage of 90 V or more, but not more than 305 V

—

a certified input frequency of 47 Hz or more, but not more than 440 Hz

—

a constant current output of 350 mA or more, but not more than 15 A

—

an inrush current of not more than 10 A

—

an operating temperature range of – 40 °C or more, but not more than + 85 °C,

—

suitable for driving of LED-illuminants

0 %

31.12.2017

ex 8504 40 90

20

Direct current to direct current converter

0 %

31.12.2018

ex 8504 40 90

30

Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 8516 50 00 (1)

0 %

31.12.2018

ex 8504 40 90

40

Semiconductor power modules comprising:

—

power transistors,

—

integrated circuits,

—

whether or not containing diodes and with or without thermistors,

—

an operating voltage of not more than 600 V,

—

not more than three electrical outputs each containing two power switches (whether MOSFET (Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, and

—

a rms (root mean square) current rating of not more than 15,7 A

0 %

31.12.2018

ex 8504 40 90

50

Drive unit for industrial robot with:

—

one or six 3-phase motor outputs with maximum 3 × 32 A,

—

a main power input of 220 V AC or more, but not more than 480 V AC, or 280 V DC or more, but not more than 800 V DC

—

a logic power input of 24 V DC,

—

an EtherCat communication interface,

—

and a dimension of 150 × 140 × 120 mm or more, but not more than 335 × 430 × 179 mm

0 %

31.12.2018

ex 8504 40 90

60

Transfer moulded semiconductor power module comprising:

—

power transistors,

—

integrated circuits,

—

whether or not containing diodes and with or without thermistors,

—

a circuit configuration,

—

either containing a direct drive stage with an operating voltage of more than 600 V,

—

or containing a direct drive stage with an operating voltage of not more than 600 V and a rms current of more than 15,7 A,

—

or including one or more power factor correction modules

0 %

31.12.2018

ex 8504 50 95

20

Inductor with an inductance of not more than 62 mH

0 %

31.12.2018

ex 8504 50 95

40

Coil choke with:

—

an inductance of 4,7 μH (± 20 %),

—

a DC resistance of not more than 0,1 Ohms,

—

an insulation resistance of 100 MOhms or more at 500 V (DC)

for use in the manufacture of LCD and LED module power boards (1)

0 %

31.12.2015

ex 8504 50 95

50

Solenoid coil with

—

a power consumption of not more than 6 W,

—

an insulation resistance of more than 100 M ohms, and

—

an insert hole of 11,4 mm or more, but not more than 11,8 mm

0 %

31.12.2017

ex 8504 90 11

10

Ferrite cores, other than for deflection yokes

0 %

31.12.2018

ex 8505 11 00

31

Permanent magnet having a remanence of 455 mT (± 15 mT)

0 %

31.12.2018

ex 8505 11 00

33

Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with measurements of not more than 15 mm × 10 mm × 2 mm, or in the shape of a disc with a diameter of not more than 90mm, whether or not containing a hole in the centre

0 %

31.12.2018

ex 8505 11 00

35

Permanent magnets of an alloy of either neodymium, iron and boron, or samarium and cobalt coated having undergone inorganic passivation (inorganic coating) using zinc phosphate for the industrial manufacture of products in motor or sensory applications (1)

0 %

31.12.2017

ex 8505 11 00

50

Bars specifically shaped, intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions:

—

a length of 15 mm or more but not more than 52 mm,

—

a width of 5 mm or more but not more than 42 mm,

of a kind to be used in the manufacture of electric servomotors for industrial automation

0 %

31.12.2017

ex 8505 11 00

60

Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with

—

a diameter of not more than 45 mm,

—

a height of not more than 45 mm,

of a kind used in the manufacture of permanent magnets after magnetisation

0 %

31.12.2017

ex 8505 11 00

70

Disc:

—

with a diameter of not more than 90 mm,

—

whether or not containing a hole in the centre,

—

consisting of an alloy of neodymium, iron and boron, covered with nickel, that after magnetisation is intended to become permanent magnet,

of a kind used in car loudspeakers

0 %

31.12.2018

ex 8505 11 00

80

Articles in the form of a triangle, square or rectangle, intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions:

—

a length of 15 mm or more but not more than 105 mm,

—

a width of 5 mm or more but not more than 105 mm,

—

a height of 3 mm or more but not more than 55 mm

0 %

31.12.2018

ex 8505 19 90

30

Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetization with a remanence between 350 mT and 470 mT

0 %

31.12.2018

ex 8505 20 00

30

Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles (1)

0 %

31.12.2018

ex 8505 90 20

91

Solenoid with a plunger, operating at a nominal supply voltage of 24 V at a nominal DC of 0,08 A, for use in the manufacture of products falling within heading 8517 (1)

0 %

31.12.2018

ex 8506 50 90

10

Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V

0 %

31.12.2018

ex 8506 50 90

20

Unit consisting of not more than 2 lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32 connections and incorporating a control circuit

0 %

31.12.2018

ex 8506 50 90

30

Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah

0 %

31.12.2018

ex 8507 10 20

80

Lead acid starter battery, with:

—

a charge acceptance capacity of 200 % or more of the level of an equivalent conventional flooded battery during the first 5 seconds of charge,

—

a liquid electrolyte,

for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with high regenerative alternator controls (1)

0 %

31.12.2015

ex 8507 30 20

30

Cylindrical nickel-cadmium accumulator, with a length of 65,3 mm (± 1,5 mm) and a diameter of 14,5 mm (± 1 mm), having a nominal capacity of 1 000 mAh or more, for use in the manufacture of rechargeable batteries (1)

0 %

31.12.2018

ex 8507 50 00

ex 8507 60 00

20

20

Rectangular accumulator, with a length of not more than 69 mm, a width of not more than 36 mm and a thickness of not more than 12 mm, for use in the manufacture of rechargeable batteries (1)

0 %

31.12.2018

ex 8507 50 00

30

Cylindrical nickel-hydride accumulator, of a diameter of not more than 14,5 mm, for the manufacture of rechargeable batteries (1)

0 %

31.12.2018

ex 8507 60 00

25

Rectangular modules for incorporation in lithium-ion rechargeable batteries, with:

—

a width of 352,5 mm (± 1 mm) or 367,1 mm (± 1mm)

—

a depth of 300 mm (± 2 mm) or 272,6 mm (± 1 mm)

—

a height of 268,9 mm (± 1,4 mm) or 229,5 mm (± 1mm)

—

a weight of 45,9 kg or 46,3 kg

—

a rating of 75 Ah and

—

a nominal voltage of 60 V

0 %

31.12.2017

ex 8507 60 00

30

Cylindrical lithium-ion accumulator, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries (1)

0 %

31.12.2014

ex 8507 60 00

35

Lithium-ion rechargeable batteries, with:

—

a length of 1 475 mm or more, but not more than 2 200 mm

—

a width of 935 mm or more, but not more than 1 400 mm

—

a height of 260 mm or more, but not more than 310 mm

—

a weight of 320 kg or more, but not more than 390 kg

—

a nominal capacity of 18,4 Ah or more, but not more than 130 Ah,

—

put up in packs of 12 or 16 modules

0 %

31.12.2017

ex 8507 60 00

40

Batteries of ion-lithium electric accumulators rechargeable with:

—

a length of 1 203 mm or more, but not more than 1 297 mm,

—

a width of 282 mm or more, but not more than 772 mm,

—

a height of 792 mm or more, but not more than 839 mm,

—

a weight of 260 kg or more, but not more than 293 kg,

—

power of 22 kWh or 26 kWh, and

—

constituted of 24 or 48 modules

0 %

31.12.2017

ex 8507 60 00

50

Modules for the assembly of batteries of ion lithium electric accumulators with:

—

a length of 298 mm or more, but not more than 408 mm,

—

a width of 33,5 mm or more, but not more than 209 mm,

—

a height of 138 mm or more, but not more than 228 mm,

—

a weight of 3,6 kg or more, but not more than 17 kg, and

—

a power of 458 kWh or more, but not more than 2 158 kWh

0 %

31.12.2017

ex 8507 60 00

55

Lithium-ion accumulator in cylindrical form, with:

—

a base similar to an ellipse squeezed in the middle,

—

a length of 49 mm or more (not including terminals),

—

a width of 33,5 mm or more,

—

a thickness of 9,9 mm or more,

—

a rated capacity of 1,75 Ah or more, and

—

a rated voltage of 3,7 V,

for the manufacture of rechargeable batteries (1)

0 %

31.12.2017

ex 8507 60 00

57

Lithium-ion accumulator, cuboid in shape, with:

—

some of the corners rounded off,

—

a length of 76 mm or more (not including terminals),

—

a width of 54,5 mm or more,

—

a thickness of 5,2 mm or more,

—

a rated capacity of 3 100 mAh or more, and

—

a rated voltage of 3,7 V,

for the manufacture of rechargeable batteries (1)

0 %

31.12.2017

ex 8507 60 00

60

Lithium-ion rechargeable batteries, with:

—

a length of 1 213 mm or more, but not more than 1 575 mm,

—

a width of 245 mm or more but not more than 1 200 mm,

—

a height of 265 mm or more, but not more than 755 mm,

—

a weight of 265 kg or more but not more than 294 kg,

—

a nominal capacity of 66,6 Ah,

put up in packs of 48 modules

0 %

31.12.2015

ex 8507 60 00

65

Cylindrical Lithium Ion Cell with

—

3,5 VDC to 3,8 VDC,

—

300 mAh to 900 mAh and

—

a diameter of 10,0 mm to 14,5 mm

0 %

31.12.2016

ex 8507 60 00

70

Rectangular modules for incorporation in lithium-ion rechargeable batteries:

—

of a length of 350 mm or 312 mm,

—

of a width of 79,8 mm or 225 mm,

—

of a height of 168 mm or 35 mm,

—

of a weight of 6,2 kg or 3,95 kg,

—

with a rating of 129 Ah or 66,6 Ah

0 %

31.12.2015

ex 8507 60 00

75

Rectangular lithium-ion-accumulator, with

—

a metal casing,

—

a length of 173 mm (± 0,15 mm),

—

a width of 21 mm (± 0,1 mm),

—

a height of 91 mm (± 0,15 mm),

—

a nominal voltage of 3,3 V and,

—

a nominal capacity of 21 Ah or more

0 %

31.12.2016

ex 8507 60 00

80

Rectangular lithium-ion-accumulator, with

—

a metal casing,

—

a length of 171 mm (± 3 mm),

—

a width of 45,5 mm (± 1 mm),

—

a height of 115 mm (± 1 mm),

—

a nominal voltage of 3,75 V and

—

a nominal capacity of 50 Ah

for use in the manufacture of rechargeable batteries for motor vehicles (1)

0 %

31.12.2015

ex 8507 90 80

70

Cut plate of nickel-plated copper foil, with:

—

a width of 70 mm (± 5 mm),

—

a thickness of 0,4 mm (± 0,2 mm),

—

a length of not more than 55 mm,

for use in the manufacture of lithium-ion electric vehicle batteries (1)

0 %

31.12.2016

ex 8508 70 00

ex 8537 10 99

10

96

Electronic circuit card without separate housing for actuating and controlling vacuum cleaner brushes powered by not more than 300 W

0 %

31.12.2015

ex 8508 70 00

ex 8537 10 99

20

98

Electronic circuit cards that:

—

are connected by wire or radio frequency to each other and the motor controller card, and

—

regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,

—

whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)

0 %

31.12.2015

ex 8512 40 00

ex 8516 80 20

10

20

Car door mirror heating foil:

—

with two electrical contacts,

—

with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass),

—

with a protective paper film on both sides

0 %

31.12.2018

ex 8516 90 00

60

Ventilation sub-assembly of an electric deep-fat fryer:

—

fitted with a motor having a power rating of 8 W at 4 600 rpm,

—

governed by an electronic circuit,

—

operating at ambient temperatures above 110 °C,

—

fitted with a thermoregulator

0 %

31.12.2014

ex 8516 90 00

70

Inner pot:

—

containing side and central openings,

—

of annealed aluminium,

—

with a ceramic coating, heat resistant to more than 200 °C

for use in the manufacture of an electric fryer (1)

0 %

31.12.2017

ex 8518 29 95

30

Loudspeakers of:

—

an impedance of 4 Ohm or more, but not more than 16 Ohm,

—

a nominal power of 2 W or more, but not more than 20 W,

—

with or without plastic bracket, and

—

with or without electric cable fitted with connectors,

of a kind used for TV sets and video monitors manufacture

0 %

31.12.2017

ex 8518 30 95

20

Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed 5 mm × 6 mm × 8 mm

0 %

31.12.2018

ex 8518 40 80

91

Circuit board sub-assembly, comprising digital audio signal decoding, audio signal processing and amplification with dual and/or multi-channel functionality

0 %

31.12.2014

ex 8518 40 80

92

Circuit board sub-assembly, comprising power supply, active equalizer and power amplifier circuits

0 %

31.12.2015

ex 8518 90 00

91

Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers (1)

0 %

31.12.2018

ex 8521 90 00

20

Digital video recorder:

—

without a hard disk drive,

—

with or without a DVD-RW drive,

—

with either motion detection or capability of motion detection through IP connectivity via LAN connector

—

with or without a USB serial port,

for use in the manufacture of Closed-circuit television (CCTV) surveillance systems (1)

0 %

31.12.2014

ex 8522 90 49

50

Electronic assembly for a laser read-head of a compact disc player, comprising:

—

a printed circuit,

—

a photo-detector, in the form of a monolithic integrated circuit, contained in a housing,

—

not more than 3 connectors,

—

not more than 1 transistor,

—

not more than 3 variable and 4 fixed resistors,

—

not more than 5 capacitors,

the whole mounted on a support

0 %

31.12.2018

ex 8522 90 49

ex 8527 99 00

ex 8529 90 65

60

10

25

Printed circuit board assembly comprising:

—

a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities,

—

a microprocessor capable of receiving remote control messages and controlling the tuner chipset,

for use in the manufacture of home entertainment systems (1)

0 %

31.12.2014

ex 8522 90 49

ex 8527 99 00

ex 8529 90 65

65

20

40

Printed circuit board subassembly, comprising:

—

a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly, with a signal decoder,

—

a radio frequency (RF) remote control receiver,

—

an infrared remote control signal transmitter,

—

a SCART signal generator

—

a TV state sensor

for use in the manufacture of home entertainment systems (1)

0 %

31.12.2014

ex 8522 90 49

70

Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit

0 %

31.12.2018

ex 8522 90 80

15

Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and/or integrated circuits in products of heading 8521

0 %

31.12.2017

ex 8522 90 80

ex 8529 90 92

30

30

Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (1)

0 %

31.12.2016

ex 8522 90 80

65

Assembly for optical discs, comprising at least an optical unit and DC motors, whether or not capable of double layer recording

0 %

31.12.2018

ex 8522 90 80

70

Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading 8521 (1)

0 %

31.12.2018

ex 8522 90 80

75

Optical reading head for CD player, consisting of one laser diode, one photo detector integrated circuit and one beam splitter

0 %

31.12.2018

ex 8522 90 80

80

Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings 8519, 8521, 8526, 8527, 8528 or 8543 (1)

0 %

31.12.2018

ex 8522 90 80

81

Laser optical pick up unit for the reproduction of optical signals from CD or DVD and the recording of optical signal on DVD, comprising at least

—

a laser diode,

—

a laser driver integrated circuit,

—

a photo detector integrated circuit,

—

a front monitor integrated circuit and an actuator,

for use in the manufacture of products falling within heading 8521 (1)

0 %

31.12.2016

ex 8522 90 80

83

Blu-ray optical pick-up unit, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least:

—

laser diodes operating at three different wavelengths,

—

a photo detector integrated circuit and

—

an actuator,

for the manufacture of products falling within heading 8521 (1)

0 %

31.12.2018

ex 8522 90 80

84

Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least:

—

an optical pick up unit with laser diodes operating at three different wavelengths,

—

a spindle motor,

—

a stepping motor

0 %

31.12.2018

ex 8522 90 80

85

Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading 8521 (1)

0 %

31.12.2018

ex 8522 90 80

96

Hard disk drive, for incorporation in products of heading 8521 (1)

0 %

31.12.2017

ex 8522 90 80

ex 8529 90 65

97

50

Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under headings 8521 and 8528 (1)

0 %

31.12.2016

ex 8525 80 19

20

Assembly for television cameras of dimensions of not more than 10 mm × 15 mm × 18 mm, comprising an image sensor, an objective and a color processor, having an image resolution of not more than 1 024 × 1 280 pixels, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 8517 12 00 (1)

0 %

31.12.2018

ex 8525 80 19

25

Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with:

—

a sensitivity in the wavelength area of 8 μm or more, but not more than 14 μm,

—

a resolution of 324 × 256 pixels,

—

a weight of not more than 400 g,

—

measurements of not more than 70 mm × 67 mm × 75 mm,

—

a waterproof housing and an automotive- qualified plug and

—

a deviation of the output signal over the entire work temperature range of not more than 20 %

0 %

31.12.2014

ex 8525 80 19

ex 8525 80 91

31

10

Closed circuit television (CCTV) camera:

—

of a weight of not more than 5,9 kg,

—

without a housing,

—

of dimensions of not more than 405 mm × 315 mm,

—

with a single Charge-Couple-Device (CCD) or Complementary Metal–Oxide–Semiconductor (CMOS) sensor,

—

with effective pixels of not more than 5 megapixels,

for use in CCTV surveillance systems (1)

0 %

01.07.2014

ex 8525 80 19

35

Image scanning cameras, using:

—

a „Dynamic overlay lines“ system,

—

an output NTSC video signal,

—

a voltage of 6,5 V,

—

an illuminance of 0,5 lux or more

0 %

31.12.2014

ex 8525 80 19

40

Assembly for cameras used in computer notebooks of dimensions of not more than 15 mm × 25 mm × 25 mm, comprising an image sensor, an objective and a colour processor, having an image resolution of not more than 1 600 × 1 200 pixels, whether or not fitted with cable and/or housing, whether or not mounted on a base and containing a LED chip (1)

0 %

31.12.2016

ex 8525 80 19

45

Camera module with a resolution of 1 280 * 720 P HD, with two microphones, for use in the manufacture of products of heading 8528 (1)

0 %

31.12.2017

ex 8526 91 20

ex 8527 29 00

80

10

Integrated audio module (IAM) with a digital video output for connection to an LCD touch screen monitor, interfaced over the Media Oriented Systems Transport (MOST) network and transported over the MOST High protocol, with or without

—

a printed circuit board (PCB) containing a Global Positioning System (GPS) receiver, a gyroscope, and a Traffic Message Channel (TMC) tuner,

—

a hard disk drive supporting multiple maps,

—

a HD radio,

—

a voice recognition system,

—

a CD and DVD drive,

and including

—

Bluetooth, MP3 and USB input connectivity,

—

a voltage of 10 V or more but not more than 16 V,

for the use in the manufacture of vehicles in Chapter 87 (1)

0 %

31.12.2015

ex 8527 91 99

ex 8529 90 65

10

35

Assembly consisting of at least:

—

an audio frequency amplifier unit, comprising at least an audio frequency amplifier and a sound generator,

—

a transformer and

—

a radio broadcast receiver

0 %

31.12.2014

ex 8528 49 10

10

Video monitor comprising:

—

a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of not more than 110 mm and equipped with a deflector yoke, and

—

a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer,

the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus (1)

0 %

31.12.2018

ex 8528 59 70

10

Liquid crystal display colour video monitors, excluding those combined with other apparatus, having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less,

—

without a housing, with back cover and mounting frame,

—

or with a housing,

used for permanent incorporation or permanent mounting, during industrial assembly, into goods of Chapters 84 to 90 and 94 (1)

0 %

30.06.2014

ex 8529 10 80

20

Ceramic filter package comprising 2 ceramic filters and 1 ceramic resonator for a frequency of 10,7 MHz (± 30 kHz), contained in a housing

0 %

31.12.2018

ex 8529 10 80

50

Ceramic filter for a centre frequency of 450 kHz (± 1,5 kHz) or 455 kHz (± 1,5 kHz), with a bandwidth of not more than 30 kHz at 6 dB and not more than 70 kHz at 40 dB, contained in a housing

0 %

31.12.2018

ex 8529 10 80

60

Filters, excluding surface acoustic wave filters, for a center frequency of 485 MHz or more but not more than 1 990 MHz with an insertion loss of not more than 3,5 dB, contained in a housing

0 %

31.12.2018

ex 8529 90 65

ex 8548 90 90

30

44

Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing

0 %

31.12.2018

ex 8529 90 65

45

Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of products falling within heading 8527 (1)

0 %

31.12.2014

ex 8529 90 65

55

Ambient light LED board to be incorporated in goods of heading 8528 (1)

0 %

31.12.2015

ex 8529 90 65

60

Tuner transforming high frequency signals to mid frequency signals for use in the manufacture of satellite or terrestrial TV receivers for set-top boxes (1)

0 %

31.12.2016

ex 8529 90 65

65

Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module

0 %

31.12.2015

ex 8529 90 65

70

Unit driver consisting of an electronic integrated circuit and a flexible printed circuit, for use in the manufacture of LCD modules (1)

0 %

31.12.2016

ex 8529 90 65

75

Modules comprising at least semiconductor chips for:

—

the generation of driving signals for pixel addressing, or

—

driving addressing pixels

0 %

31.12.2017

ex 8529 90 92

25

LCD modules, not combined with touch screen facilities, solely consisting of:

—

one or more TFT glass or plastic cells,

—

a die cast heat sink,

—

a backlight unit,

—

one printed circuit board with micro controller, and

—

LVDS (Low Voltage Differential Signalling) interface,

for use in the manufacture of radios for motor vehicles (1)

0 %

31.12.2015

ex 8529 90 92

32

Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading 8528 (1)

0 %

31.12.2018

ex 8529 90 92

40

Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors (1)

0 %

31.12.2018

ex 8529 90 92

41

Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors (1)

0 %

31.12.2018

ex 8529 90 92

42

Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and integrated circuits in television sets (1)

0 %

31.12.2018

ex 8529 90 92

43

Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply

0 %

31.12.2018

ex 8529 90 92

44

LCD modules, solely consisting of one or more TFT glass or plastic cells, not combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only

0 %

31.12.2018

ex 8529 90 92

45

Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats

0 %

31.12.2018

ex 8529 90 92

47

Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel

0 %

31.12.2014

ex 8529 90 92

48

Aluminium die cast heat sink, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 (1)

0 %

31.12.2014

ex 8529 90 92

ex 8536 69 90

49

83

AC socket with a noise filter, composed of:

—

AC socket (for power cord connection) of 230 V,

—

integrated noise filter composed of capacitors and inductors,

—

cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,

whether or not equipped with a metal support, which joins the AC socket to the PDP TV set

0 %

31.12.2014

ex 8529 90 92

50

Colour LCD display panel for LCD monitors of heading 8528:

—

with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

—

with backlight, micro-controller,

—

with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,

—

in a housing with or without a heat sink at the back of the housing,

—

without a signal-processing module,

for use in the manufacture of vehicles of chapter 87 (1)

0 %

31.12.2015

ex 8529 90 92

70

Rectangular fastening and covering frame:

—

of an aluminium alloy containing silicon and magnesium,

—

with a length of 900 mm or more but not more than 1 500 mm,

—

with a width of 600 mm or more but not more than 950 mm,

of a kind used for the production of TV sets

0 %

31.12.2017

ex 8531 80 95

40

Electro-accoustic transducer

0 %

31.12.2018

ex 8535 90 00

20

Printed circuit board in the form of plates consisting of isolating material with electrical connections and solder points, for use in the manufacture of back light units for LCD modules (1)

0 %

31.12.2018

ex 8535 90 00

ex 8536 50 80

30

83

Semiconductor module switch in a casing:

—

consisting of an IGBT transistor chip and a diode chip on one or more lead frames,

—

for a voltage of 600 V or 1 200 V

0 %

31.12.2015

ex 8536 30 30

11

Thermo-electric switch with a cut-off current of 50 A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing

0 %

31.12.2018

ex 8536 49 00

91

Thermal relays contained in a hermetically sealed glass cartridge of not more than 35 mm in length excluding wires, with a maximum leakage rate of 10–6 cm3 He/sec at one bar in the temperature range 0 °C to 160 °C, to be incorporated into compressors for refrigerating equipment (1)

0 %

31.12.2018

ex 8536 50 11

31

Switch of the printed circuit mount type, operating at a force of 4,9 N (± 0,9 N), contained in a housing

0 %

31.12.2018

ex 8536 50 11

32

Mechanical tact switch for connecting electronic circuits, operating at a voltage of not more than 60V and at a current strength of not more than 50mA, for use in the manufacture of products of headings 8521 or 8528 (1)

0 %

31.12.2018

ex 8536 50 19

91

Hall effect switch, comprising 1 magnet, 1 Hall effect sensor and 2 capacitors, contained in a housing with 3 connections

0 %

31.12.2018

ex 8536 50 19

ex 8536 50 80

93

97

Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing

0 %

31.12.2018

ex 8536 50 80

81

Mechanical speed governer switches for connecting electrical circuits, with:

—

a voltage of 240 V or more but not more than 250 V,

—

an amperage of 4 A or more but not more than 6 A,

for use in the manufacture of machines falling within heading 8467 (1)

0 %

31.12.2014

ex 8536 50 80

82

Mechanical switches for connecting electrical circuits, with:

—

a voltage of 240 V or more but not more than 300 V,

—

an amperage of 3 A or more but not more than 15 A,

for use in the manufacture of machines falling within heading 8467 (1)

0 %

31.12.2014

ex 8536 50 80

93

Switch unit for coaxial cable, comprising 3 electromagnetic switches, with a switching time of not more than 50 ms and an actuating current of not more than 500 mA at a voltage of 12 V

0 %

31.12.2018

ex 8536 50 80

98

Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220 V or more but not more than 250 V and at a current strength of not more than 5 A, for use in the manufacture of products of headings 8521 or 8528 (1)

0 %

31.12.2018

ex 8536 69 90

51

SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528 (1)

0 %

31.12.2017

ex 8536 69 90

81

Pitch connector for use in the manufacture of LCD television reception apparatus (1)

0 %

31.12.2017

ex 8536 69 90

82

Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least:

—

a pulse transformer, including a wide-band ferrite core,

—

a common mode coil,

—

a resistor,

—

a capacitor,

for use in the manufacture of products falling within headings 8521 or 8528 (1)

0 %

31.12.2014

ex 8536 69 90

84

Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528 (1)

0 %

31.12.2015

ex 8536 69 90

85

Socket or plug, built into a plastic or metal housing, with no more than 8 pins, for use in the manufacture of products falling within headings 8521 or 8528 (1)

0 %

31.12.2016

ex 8536 69 90

86

High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528 (1)

0 %

31.12.2016

ex 8536 69 90

87

D-Subminiature (D-sub) type socket or plug, built into a plastic or metal housing, with 15 pins in 3 rows, for use in the manufacture of products falling within headings 8521 or 8528 (1)

0 %

31.12.2016

ex 8536 69 90

88

Secure Digital (SD), CompactFlash, "Smart Card" and 64- pin PC-card female connectors, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1 000 V

0 %

31.12.2017

ex 8536 70 00

10

Optical socket or plug, for use in the manufacture of goods falling within headings 8521 or 8528 (1)

0 %

31.12.2016

ex 8536 70 00

20

Metal plugs, sockets and connectors in plastic or metal housing for optically and mechanically aligning optical fibre cables:

—

having an operating temperature of -20 °C or more, but not more than 70 °C,

—

having a signal transmission speed of not more than 25 Mbps,

—

having a supply voltage of -0,5 V or more, but not more than 7 V,

—

having an input voltage of -0,5 V or more, but not more than 7,5 V,

—

without an integrated circuit,

for use in the manufacture of products of headings 8521 and 8528 (1)

0 %

31.12.2016

ex 8536 90 85

92

Metallic stamped frame with connections

0 %

31.12.2018

ex 8536 90 85

ex 8544 49 93

94

10

Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements

0 %

31.12.2018

ex 8536 90 85

97

Secure Digital (SD) type memory card slot, push-push or push-pull type, for use in the manufacture of goods falling within headings 8521 or 8528 (1)

0 %

31.12.2016

ex 8537 10 91

30

Data processing and evaluation vehicle dashboard control module, operating through the CAN - bus protocol, containing at least:

—

microprocessor relays,

—

a stepper motor,

—

Electrically Erasable Programmable Read-Only (EEPROM) memory, and

—

other passive components (such as connectors, diodes, voltage stabilizer, resistors, capacitors, transistors),

with a voltage of 13,5 V

0 %

31.12.2017

ex 8537 10 99

92

Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors

0 %

31.12.2018

ex 8537 10 99

93

Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems (1)

0 %

31.12.2018

ex 8537 10 99

ex 8543 70 90

94

20

Unit consisting of two junction field effect transistors contained in a dual lead frame housing

0 %

31.12.2018

ex 8537 10 99

97

Electronic controller card for actuating and controlling of a single-phase electric AC commutator motor, with an output of 750 W or more and an input power of more than 1 600 W but not more than 2 700 W

0 %

31.12.2015

ex 8538 90 99

92

Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5 mm × 48 mm

0 %

31.12.2018

ex 8538 90 99

95

Copper base plate, of a kind used as a heatsink in the manufacture of IGBT modules of heading 8535 or 8536 with a voltage of 650 V or more but not more than 1 200 V (1)

0 %

31.12.2018

ex 8539 39 00

20

Cold cathode (CCFL) or external electrode (EEFL) fluorescent lamps, of a diameter of not more than 5 mm and with a length of more than 120 mm but not more than 1 570 mm

0 %

31.12.2016

ex 8540 11 00

93

Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 79 cm or more

0 %

31.12.2016

ex 8540 20 80

91

Photomultiplier

0 %

31.12.2016

ex 8540 71 00

20

Continuous wave magnetron with a fixed frequency of 2 460 MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 8516 50 00 (1)

0 %

31.12.2018

ex 8540 89 00

91

Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons

0 %

31.12.2018

ex 8540 89 00

92

Vacuum fluorescent display tube

0 %

31.12.2018

ex 8543 70 90

ex 9405 40 39

ex 9405 40 99

23

50

03

Semiconductor device for the conversion of electrical energy into visible, infra-red or ultra-violet rays:

—

whether or not with a housing

—

with electrical leads,

—

including one or more light-emitting semiconductor chips which may be electrically connected among each other and which may be furnished for their protection with one or multiple protective diodes,

—

formed/shaped as an indivisible entity

—

for use in the manufacture of lighting gear employed for solid state lighting / for general lighting purposes (1)

0 %

31.12.2018

ex 8543 70 90

30

Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing

0 %

31.12.2018

ex 8543 70 90

35

Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing

0 %

31.12.2018

ex 8543 70 90

40

High-frequency amplifier comprising one or more integrated circuits and discrete capacitor chips on a metal flange in a housing

0 %

31.12.2015

ex 8543 70 90

45

Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing

0 %

31.12.2018

ex 8543 70 90

55

Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing

0 %

31.12.2018

ex 8543 70 90

60

Oscillator, with a centre frequency of 20 GHz or more but not more than 42 GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing

0 %

31.12.2018

ex 8543 70 90

65

Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2 or 3 monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing

0 %

31.12.2018

ex 8543 70 90

80

Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing

0 %

31.12.2018

ex 8543 70 90

85

Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing

0 %

31.12.2018

ex 8543 70 90

95

Mobile telephone view and control module comprising of:

—

a mains power/ CAN (Controller area network) output socket,

—

a universal serial bus (USB) and audio IN/OUT ports and

—

incorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST),

for use in the manufacture of vehicles of Chapter 87 (1)

0 %

31.12.2015

ex 8543 90 00

20

Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips

0 %

31.12.2014

ex 8543 90 00

30

Assembly of products falling within heading 8541 or 8542 mounted on a printed circuit, contained in a housing

0 %

31.12.2018

ex 8543 90 00

40

Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back

0 %

31.12.2017

ex 8544 20 00

ex 8544 42 90

ex 8544 49 93

ex 8544 49 95

10

20

20

10

PET/PVC insulated flexible cable with:

—

a voltage of not more than 60 V,

—

a current of not more than 1 A,

—

a heat resistance of not more than 105 °C,

—

individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),

—

a distance between conductors of not more than 0,5 mm and

—

a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm

0 %

31.12.2018

ex 8544 42 90

10

Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:

—

a voltage of 1,25 V (± 0,25 V)

—

connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,

—

outer screening shielding,

used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits

0 %

31.12.2018

ex 8544 42 90

30

PET insulated electric conductor with:

—

10 or 80 individual wires,

—

a length of 50 mm or more, but not more than 800 mm,

—

connector(s) and/or plug(s) fitted at one or both ends,

for use in the manufacture of products falling within headings 8521 and 8528 (1)

0 %

31.12.2017

ex 8545 19 00

20

Carbon electrodes, for use in the manufacture of zinc-carbon batteries (1)

0 %

31.12.2018

ex 8545 90 90

20

Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes

0 %

31.12.2015

ex 8547 10 00

10

Insulated fitting of ceramics, containing by weight 90 % or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20 mm or more but not more than 250 mm, for the manufacture of vacuum interrupters (1)

0 %

31.12.2018

ex 8548 10 29

10

Spent lithium-ion or nickel metal hydride electric accumulators

0 %

31.12.2016

ex 8548 90 90

41

Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing

0 %

31.12.2018

ex 8548 90 90

43

Contact image sensor

0 %

31.12.2018

ex 8548 90 90

47

Unit consisting of two or more light emitting diode chips operating at a typical wavelength of 440 nm or more but not more than 660 nm, contained in a lead frame housing whose exterior dimensions - without fittings – do not exceed 12 mm × 12 mm

0 %

31.12.2018

ex 8548 90 90

48

Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm

0 %

31.12.2018

ex 8548 90 90

49

LCD modules, solely consisting of one or more TFT glass or plastic cells, combined with touch screen facilities, with or without backlight unit, with or without inverters and one or more printed circuit boards with control electronics for pixel addressing only

0 %

31.12.2018

ex 8548 90 90

50

Filters with a ferromagnetic core, used to suppress high frequency noise in electronic circuits, for the manufacture of TV sets and monitors of heading 8528 (1)

0 %

31.12.2017

ex 8704 23 91

20

Motor chassis with a self-ignition capacity of at least 8 000 cm3, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm (1)

0 %

31.12.2017

ex 8708 30 91

10

Drum type parking brake:

—

operating within the service brake disk,

—

with a diameter of 170 mm or more but not more than 175 mm,

for use in the manufacture of motor vehicles (1)

0 %

31.12.2015

ex 8708 99 97

20

Metal housing caps for incorporation into balancing-arms or spherical bearings used in the suspension systems for the front wheels of motor vehicles (1)

0 %

31.12.2016

ex 8803 30 00

50

Pre-formed helicopter rotor shafts:

—

of circular cross-section,

—

with a length of 1 249,68 mm or more, but not more than 1 496,06 mm,

—

of an external diameter of 81,356 mm or more, but not more than 82,2198 mm,

—

swaged on both ends to an external diameter of 63,8683 mm or more, but not more than 66,802 mm,

—

heat treated according to standards MIL-H-6088, AMS 2770 or AMS 2772

0 %

31.12.2016

ex 9001 10 90

10

Image reverser made up from an assembly of optical fibres

0 %

31.12.2018

ex 9001 10 90

30

Polymer optical fibre with:

—

a poly(methyl methacrylate) core,

—

a cladding of fluorinated polymer,

—

a diameter of not more than 3,0 mm, and

—

a length of more than 150 m,

of a kind used in the manufacture of polymer fibre cables

0 %

31.12.2016

ex 9001 20 00

10

Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film

0 %

31.12.2017

ex 9001 20 00

ex 9001 90 00

20

55

Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut

0 %

31.12.2018

ex 9001 90 00

21

Multi-Optical-Path (MOP) film, in rolls, based on poly(ethylene terephthalate) (PET) material:

—

having a total thickness of 100 μm or more, but not more than 240 μm,

—

having a total transmittance of more than 55 % but not more than 65 %, determined by standard method JIS K7105 related to ASTM D1003 and

—

haze more than 70 % but not more than 80 %, determined by standard method JIS K7105 related to ASTM D1003

0 %

31.12.2014

ex 9001 90 00

25

Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material

0 %

31.12.2017

ex 9001 90 00

35

Rear projection screen, comprising a lenticular plastic plate

0 %

31.12.2018

ex 9001 90 00

45

Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends

0 %

31.12.2018

ex 9001 90 00

60

Reflector or diffuser sheets in rolls

0 %

31.12.2018

ex 9001 90 00

65

Optical film with a minimum of 5 multi-layer structures, including a back side reflector, a front side coating and a contrast filter with a pitch of not more than 0,65 μm, for use in the manufacture of front projection screens (1)

0 %

31.12.2014

ex 9001 90 00

70

Poly(ethylene terephthalate) film with a thickness of less than 300 μm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90 ° and a prism pitch of 50 μm

0 %

31.12.2016

ex 9001 90 00

75

Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules (1)

0 %

31.12.2017

ex 9001 90 00

85

Light guide panel made of poly(methyl methacrylate):

—

whether or not cut,

—

whether or not printed,

for use in the manufacture of backlight units for flat screen TVs (1)

0 %

31.12.2015

ex 9002 11 00

10

Adjustable lens unit, having a focal length of 90 mm or more but not more than 180 mm and comprising a combination of between 4 and 8 glass or methacrylic lenses with a diameter of 120 mm or more but not more than 180 mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors (1)

0 %

31.12.2018

ex 9002 11 00

20

Lenses

—

measuring not more than 80 mm × 55 mm × 50 mm,

—

with a resolution of 160 lines/mm or better, and

—

with a zoom ratio of 18 times,

of a kind used for the production of visualizers or live image cameras

0 %

31.12.2017

ex 9002 11 00

30

Lenses

—

measuring not more than 180 mm × 100 mm × 100 mm at a maximum focal length of more than 200 mm,

—

with a resolution of 130 lines/mm or better, and

—

with a zoom ratio of 18 times

of a kind used for the production of visualizers or live image cameras

0 %

31.12.2017

ex 9002 11 00

40

Lenses

—

measuring not more than 125 mm × 65 mm × 65 mm,

—

with a resolution of 125 lines/mm or better, and

—

with a zoom ratio of 16 times

of a kind used for the production of visualizers or live image cameras

0 %

31.12.2017

ex 9002 11 00

50

Lens unit, having a focal length of 25 mm or more but not more than 150 mm, consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm

0 %

31.12.2018

ex 9002 11 00

70

Lenses

—

measuring not more than 180 mm×100 mm×100 mm at a maximum focal length of more than 200 mm,

—

with an etendue of 7 steradian mm2 or better, and

—

with a zoom ratio of 16 times

of a kind used for the production of visualizers or live image cameras

0 %

31.12.2017

ex 9002 20 00

10

Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 (1)

0 %

31.12.2018

ex 9002 90 00

20

Lens, mounted, having a fixed focal length of 3,8 mm (± 0,19 mm) or 8 mm (± 0,4 mm), with a relative aperture of F2.0 and a diameter of not more than 33 mm, for use in the manufacture of charged-coupled (CCD) cameras (1)

0 %

31.12.2018

ex 9002 90 00

30

Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates

0 %

31.12.2018

ex 9002 90 00

40

Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material

0 %

31.12.2017

ex 9012 90 90

10

Energy filters, to be installed on the column of electron microscopes

0 %

31.12.2016

ex 9013 20 00

10

Carbon dioxide laser, stimulated by high frequency, having an output power of 12 W or more, but not more than 200 W

0 %

31.12.2018

ex 9013 20 00

20

Laser head assemblies for use in the manufacture of measuring or checking machines for semiconductor wafers or devices (1)

0 %

31.12.2018

ex 9013 20 00

30

Laser for use in the manufacture of measuring or checking machines for semiconductor wafers or devices (1)

0 %

31.12.2018

ex 9022 90 00

10

Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, with an active surface of 409,6 mm2 × 409,6 mm2 and a pixel size of 200 μm2 × 200 μm2

0 %

31.12.2018

ex 9025 80 40

30

Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of

—

a combination of one or more monolithic application-specific integrated circuits (ASIC) and

—

at least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

0 %

31.12.2018

ex 9027 10 90

10

Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing

0 %

31.12.2018

ex 9029 10 00

20

Device for measuring wheel speed in vehicles (semi-conductor wheel speed sensor), consisting of:

—

a monolithic integrated circuit in a housing, and

—

one or more discrete SMD capacitors connected in parallel to the integrated circuit

—

whether or not with integrated permanent magnets

for detecting the movement of a pulse generator

0 %

31.12.2018

ex 9031 80 34

30

Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing

0 %

31.12.2018

ex 9031 80 38

10

Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing

0 %

31.12.2018

ex 9031 80 38

20

Electronic semiconductor accelerometer in a housing, mainly consisting of

—

a combination of one or more monolithic application-specific integrated circuits (ASIC) and

—

one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

to be fitted in products under chapter 84 - 90 and 94

0 %

31.12.2018

ex 9031 90 85

20

Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing

0 %

31.12.2018

ex 9032 89 00

20

Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12 A at a voltage of 30 V, having a typical contact resistance of 80 mOhm

0 %

31.12.2018

ex 9032 89 00

30

Electronic controller of electric power steering (EPS controller)

0 %

31.12.2018

ex 9032 89 00

40

Digital valve controller for controlling liquids and gases

0 %

31.12.2017

ex 9401 90 80

10

Ratchet disk of a kind used in the manufacture of reclining car seats

0 %

31.12.2015

ex 9401 90 80

20

Sidemember with a thickness of 0,8 or more but not more than 3,0 mm, used in the manufacture of reclining car seats (1)

0 %

31.12.2018

ex 9401 90 80

30

Steel bracket for mounting safety features seats with thickness of 1 mm or more but not more than 2,5 mm used in the manufacture of reclining car seats (1)

0 %

31.12.2018

ex 9401 90 80

40

Steel handles for controlling the seat adjustment mechanism used in the manufacture of reclining car seats (1)

0 %

31.12.2018

ex 9405 40 35

10

Electric light assembly of synthetic material containing 3 fluorescent tubes (RBG) of a diameter of 3,0 mm (± 0,2 mm), of a length of 420 mm (± 1 mm) or more but not more than 600 mm (± 1 mm), for the manufacture of goods of heading 8528 (1)

0 %

31.12.2018

ex 9405 40 39

10

Ambient light module with a length of 300 mm or more but not more than 600 mm, based on a light engine of a series of 3 or more but not more than 9 specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the flat TV set (1)

0 %

31.12.2018

ex 9405 40 39

20

LED array of white silicone, containing:

—

an LED matrix module measuring 38,6 mm × 20,6 mm (± 0,1 mm), equipped with 128 red and green LED chips, and

—

a flexible printed circuit board, equipped with a Negative Temperature Coefficient Thermistor

0 %

31.12.2018

ex 9405 40 39

60

LED components (equipped with light emitting diodes) fitted with

—

a plastic casing,

—

one or more light emitting diode chips either chips manufactured using thin-film technology or so-called sapphire emitter chips and

—

one or more optional semiconductor chips with electric protection function.

—

for use in the manufacture of lighting gear employed for general lighting purposes (1)

0 %

31.12.2018

ex 9405 40 99

06

LED components (equipped with light emitting diodes) fitted with

—

a casing made of ceramic or circuit board material,

—

one or more light emitting diode chips either chips manufactured using thin-film technology or so-called sapphire emitter chips

—

one or more optional semiconductor chips with electric protection function

—

for use in the manufacture of lighting gear employed for general lighting purposes (1)

0 %

31.12.2018

ex 9503 00 75

ex 9503 00 95

10

10

Plastic cable car scale models, whether or not with a motor, for printing (1)

0 %

31.12.2015

ex 9608 91 00

10

Non-fibrous plastic pen-tips with an internal canal

0 %

31.12.2018

ex 9608 91 00

20

Felt tips and other porous-tips for markers, without internal canal

0 %

31.12.2018

ex 9612 10 10

10

Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)

0 %

31.12.2018

(1)  Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (OJ L 253 11.10.1993, p. 1).

(2)  However, the measure is not allowed where processing is carried out by retail or catering undertakings.

(3)  The specific duty shall apply.

(4)  A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Article 308d of Regulation (EEC) No 2454/93.

(5)  CUS (Customs Union and Statistics Number) is assigned to each ECICS record (product). ECICS (European Customs Inventory of Chemical Substances) is an information tool managed by the European Commission, General Directorate for Taxation and Customs Union. More information can be found via the following link: http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htm

ANNEX II

CN code

TARIC

Supplementary unit

ex 6909 19 00

15

Number of Items (p/st)

ex 7020 00 10

10

p/st

ex 7616 99 90

77

p/st

ex 6909 19 00

80

p/st

ex 7006 00 90

70

p/st

ex 7009 91 00

10

p/st

7011 20 00

 

p/st

ex 7320 90 10

91

p/st

ex 7325 99 10

20

p/st

ex 7604 21 00

10

p/st

ex 7604 29 90

30

p/st

ex 7613 00 00

20

p/st

ex 7616 99 90

15

p/st

ex 7616 99 90

70

p/st

ex 8482 80 00

10

p/st

ex 8803 30 00

40

p/st

ex 7616 99 90

75

p/st

ex 8108 90 90

20

p/st

ex 9003 90 00

10

p/st

ex 8207 30 10

10

p/st

ex 8301 60 00

10

p/st

ex 8413 91 00

20

p/st

ex 8419 90 85

20

p/st

ex 8438 90 00

10

p/st

ex 8468 90 00

10

p/st

ex 8476 90 00

10

p/st

ex 8479 90 80

87

p/st

ex 8481 90 00

20

p/st

ex 8503 00 99

45

p/st

ex 8515 90 00

20

p/st

ex 8531 90 85

20

p/st

ex 8536 90 85

96

p/st

ex 8543 90 00

50

p/st

ex 8708 91 99

10

p/st

ex 8708 99 97

30

p/st

ex 9031 90 85

30

p/st

ex 8309 90 90

10

p/st

ex 8405 90 00

10

p/st

ex 8409 91 00

10

p/st

ex 8409 99 00

20

p/st

ex 8409 99 00

10

p/st

ex 8479 90 80

85

p/st

ex 8411 99 00

30

p/st

ex 8414 90 00

20

p/st

ex 8414 90 00

30

p/st

ex 8414 90 00

40

p/st

ex 8415 90 00

20

p/st

ex 8418 99 10

50

p/st

ex 8418 99 10

60

p/st

ex 8421 99 00

91

p/st

ex 8421 99 00

93

p/st

ex 8422 30 00

10

p/st

ex 8479 89 97

30

p/st

ex 8431 20 00

30

p/st

ex 8439 99 00

10

p/st

ex 8467 99 00

10

p/st

ex 8536 50 11

35

p/st

ex 8477 80 99

10

p/st

ex 8479 89 97

40

p/st

ex 8479 89 97

50

p/st

ex 8479 90 80

80

p/st

ex 8481 30 91

91

p/st

ex 8481 80 59

10

p/st

ex 8481 80 69

60

p/st

ex 8481 80 79

20

p/st

ex 8481 80 99

50

p/st

ex 8481 80 99

60

p/st

ex 8483 30 38

30

p/st

ex 8483 40 29

50

p/st

ex 8483 40 51

20

p/st

ex 8483 40 59

20

p/st

ex 8483 40 90

80

p/st

ex 8503 00 91

31

p/st

ex 8503 00 99

32

p/st

ex 8503 00 99

31

p/st

ex 8503 00 99

33

p/st

ex 8503 00 99

34

p/st

ex 8503 00 99

35

p/st

ex 8503 00 99

40

p/st

ex 8504 40 82

40

p/st

ex 8504 40 82

50

p/st

ex 8504 40 90

20

p/st

ex 8504 40 90

30

p/st

ex 8504 40 90

40

p/st

ex 8504 50 95

20

p/st

ex 8504 50 95

40

p/st

ex 8504 50 95

50

p/st

ex 8504 90 11

10

p/st

ex 8505 11 00

31

p/st

ex 8505 11 00

33

p/st

ex 8505 11 00

35

p/st

ex 8505 11 00

50

p/st

ex 8505 20 00

30

p/st

ex 8505 90 20

91

p/st

ex 8507 90 80

70

p/st

ex 8508 70 00

10

p/st

ex 8537 10 99

96

p/st

ex 8516 90 00

60

p/st

ex 8516 90 00

70

p/st

ex 8518 30 95

20

p/st

ex 8518 90 00

91

p/st

ex 8522 90 49

50

p/st

ex 8522 90 49

60

p/st

ex 8529 90 65

25

p/st

ex 8522 90 49

65

p/st

ex 8529 90 65

40

p/st

ex 8522 90 49

70

p/st

ex 8522 90 80

15

p/st

ex 8522 90 80

30

p/st

ex 8529 90 92

30

p/st

ex 8522 90 80

65

p/st

ex 8522 90 80

70

p/st

ex 8522 90 80

75

p/st

ex 8522 90 80

80

p/st

ex 8522 90 80

81

p/st

ex 8522 90 80

83

p/st

ex 8522 90 80

84

p/st

ex 8522 90 80

85

p/st

ex 8522 90 80

96

p/st

ex 8522 90 80

97

p/st

ex 8529 90 65

50

p/st

ex 8529 10 80

20

p/st

ex 8529 10 80

50

p/st

ex 8529 10 80

60

p/st

ex 8529 90 65

30

p/st

ex 8548 90 90

44

p/st

ex 8529 90 65

45

p/st

ex 8529 90 65

55

p/st

ex 8529 90 65

60

p/st

ex 8529 90 65

65

p/st

ex 8529 90 65

70

p/st

ex 8529 90 65

75

p/st

ex 8529 90 92

25

p/st

ex 8529 90 92

32

p/st

ex 8529 90 92

40

p/st

ex 8529 90 92

41

p/st

ex 8529 90 92

42

p/st

ex 8529 90 92

43

p/st

ex 8529 90 92

44

p/st

ex 8529 90 92

45

p/st

ex 8529 90 92

47

p/st

ex 8529 90 92

48

p/st

ex 8529 90 92

49

p/st

ex 8536 69 90

83

p/st

ex 8529 90 92

50

p/st

ex 8529 90 92

70

p/st

ex 8531 80 95

40

p/st

ex 8535 90 00

20

p/st

ex 8535 90 00

30

p/st

ex 8536 50 80

83

p/st

ex 8536 30 30

11

p/st

ex 8536 49 00

91

p/st

ex 8536 50 11

31

p/st

ex 8536 50 11

32

p/st

ex 8536 50 19

91

p/st

ex 8536 50 19

93

p/st

ex 8536 50 80

97

p/st

ex 8536 50 80

81

p/st

ex 8536 50 80

82

p/st

ex 8536 50 80

93

p/st

ex 8536 50 80

98

p/st

ex 8536 69 90

51

p/st

ex 8536 69 90

81

p/st

ex 8536 69 90

82

p/st

ex 8536 69 90

84

p/st

ex 8536 69 90

85

p/st

ex 8536 69 90

86

p/st

ex 8536 69 90

87

p/st

ex 8536 69 90

88

p/st

ex 8536 70 00

10

p/st

ex 8536 70 00

20

p/st

ex 8536 90 85

92

p/st

ex 8536 90 85

94

p/st

ex 8544 49 93

10

p/st

ex 8536 90 85

97

p/st

ex 8537 10 91

30

p/st

ex 8537 10 99

92

p/st

ex 8537 10 99

93

p/st

ex 8537 10 99

94

p/st

ex 8543 70 90

20

p/st

ex 8537 10 99

97

p/st

ex 8538 90 99

92

p/st

ex 8543 70 90

30

p/st

ex 8543 70 90

35

p/st

ex 8543 70 90

40

p/st

ex 8543 70 90

45

p/st

ex 8543 70 90

55

p/st

ex 8543 70 90

60

p/st

ex 8543 70 90

65

p/st

ex 8543 70 90

80

p/st

ex 8543 70 90

85

p/st

ex 8543 70 90

95

p/st

ex 8543 90 00

20

p/st

ex 8543 90 00

30

p/st

ex 8543 90 00

40

p/st

ex 8544 42 90

10

p/st

ex 8545 19 00

20

p/st

ex 8547 10 00

10

p/st

ex 8548 90 90

41

p/st

ex 8548 90 90

43

p/st

ex 8548 90 90

47

p/st

ex 8548 90 90

48

p/st

ex 8548 90 90

49

p/st

ex 8548 90 90

50

p/st

ex 8708 30 91

10

p/st

ex 8708 99 97

20

p/st

ex 8803 30 00

50

p/st

ex 9001 90 00

75

p/st

ex 9002 90 00

20

p/st

ex 9002 90 00

30

p/st

ex 9002 90 00

40

p/st

ex 9012 90 90

10

p/st

ex 9013 20 00

10

p/st

ex 9013 20 00

20

p/st

ex 9013 20 00

30

p/st

ex 9022 90 00

10

p/st

ex 9031 80 34

30

p/st

ex 9031 80 38

10

p/st

ex 9031 90 85

20

p/st

ex 9032 89 00

20

p/st

ex 9032 89 00

30

p/st

ex 9032 89 00

40

p/st

ex 9401 90 80

10

p/st

ex 9405 40 35

10

p/st

ex 9405 40 39

10

p/st

ex 9405 40 39

20

p/st

ex 9503 00 75

10

p/st

ex 9503 00 95

10

p/st

ex 3919 90 00

36

Square meter (m2)

ex 3919 90 00

44

m2

ex 3920 49 10

95

m2

ex 3921 90 60

95

m2

ex 5603 11 10

10

m2

ex 5603 11 10

20

m2

ex 5603 11 90

10

m2

ex 5603 11 90

20

m2

ex 5603 12 10

10

m2

ex 5603 12 90

10

m2

ex 5603 12 90

50

m2

ex 5603 12 90

60

m2

ex 5603 12 90

70

m2

ex 5603 13 10

10

m2

ex 5603 13 10

20

m2

ex 5603 13 90

60

m2

ex 5603 13 90

70

m2

ex 5603 14 10

10

m2

ex 5603 91 10

10

m2

ex 5603 91 90

10

m2

ex 5603 92 10

10

m2

ex 5603 92 90

10

m2

ex 5603 92 90

40

m2

ex 5603 92 90

80

m2

ex 5603 93 90

10

m2

ex 5603 93 90

50

m2

ex 3824 90 97

90

Cubic Metre (m3)

ex 3901 10 90

20

m3

ex 3901 20 90

10

m3

ex 3902 10 00

50

m3

ex 3903 11 00

10

m3

ex 3903 90 90

10

m3

ex 3907 40 00

50

m3

ex 3907 40 00

60

m3

ex 3907 60 80

40

m3

ex 3920 20 80

95

m3

ex 5402 49 00

70

Metre (m)

ex 3215 19 00

20

Litre (l)