02020D0668 — EN — 21.07.2021 — 002.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
COMMISSION IMPLEMENTING DECISION (EU) 2020/668 of 18 May 2020 (OJ L 156 19.5.2020, p. 13) |
Amended by:
|
|
Official Journal |
||
No |
page |
date |
||
COMMISSION IMPLEMENTING DECISION (EU) 2021/395 of 4 March 2021 |
L 77 |
35 |
5.3.2021 |
|
COMMISSION IMPLEMENTING DECISION (EU) 2021/1201 of 16 July 2021 |
L 259 |
8 |
21.7.2021 |
COMMISSION IMPLEMENTING DECISION (EU) 2020/668
of 18 May 2020
on the harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council
Article 1
The references of harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 listed in Annex I to this Decision are hereby published in the Official Journal of the European Union.
Article 2
The references of harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 listed in Annex II to this Decision are hereby withdrawn from the Official Journal of the European Union as from the dates set out in that Annex.
Article 2a
The references of harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 and listed in Annex III to this Decision are hereby published in the Official Journal of the European Union with a restriction.
Article 3
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX I
No |
Reference of standard |
1. |
EN 343:2019 Protective clothing – Protection against rain |
2. |
EN 358:2018 Personal protective equipment for work positioning and prevention of falls from a height – Belts and lanyards for work positioning or restraint |
3. |
EN 388:2016+A1:2018 Protective gloves against mechanical risks |
4. |
EN 510:2019 Specification for protective clothing for use where there is a risk of entanglement with moving parts |
5. |
EN 893:2019 Mountaineering equipment – Crampons – Safety requirements and test methods |
6. |
EN 943-1:2015+A1:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
7. |
EN 943-2:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET) |
8. |
EN 1073-1:2016+A1:2018 Protective clothing against solid airborne particles including radioactive contamination – Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract |
9. |
EN ISO 10819:2013 Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) EN ISO 10819:2013/A1:2019 |
10. |
EN ISO 11393-2:2019 Protective clothing for users of hand-held chainsaws – Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018) |
11. |
EN ISO 11393-4:2019 Protective clothing for users of hand-held chainsaws – Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018) |
12. |
EN ISO 11393-5:2019 Protective clothing for users of hand-held chainsaws – Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018) |
13. |
EN ISO 11393-6:2019 Protective clothing for users of hand-held chainsaws – Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018) |
14. |
EN 12277:2015+A1:2018 Mountaineering equipment – Harnesses – Safety requirements and test methods |
15. |
EN 13832-2:2018 Footwear protecting against chemicals – Part 2: Requirements for limited contact with chemicals |
16. |
EN 13832-3:2018 Footwear protecting against chemicals – Part 3: Requirements for prolonged contact with chemicals |
17. |
EN 14458:2018 Personal eye-equipment – High performance visors intended only for use with protective helmets |
18. |
EN 14594:2018 Respiratory protective devices – Continuous flow compressed air line breathing devices – Requirements, testing and marking |
19. |
EN 50321-1:2018 Live working – Footwear for electrical protection – Insulating footwear and overboots EN 50321-1:2018/AC:2018-08 |
20. |
EN 1149-5:2018 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
21. |
EN 17092-2:2020 Protective garments for motorcycle riders - Part 2: Class AAA garments - Requirements |
22. |
EN 17092-3:2020 Protective garments for motorcycle riders - Part 3: Class AA garments - Requirements |
23. |
EN 17092-4:2020 Protective garments for motorcycle riders - Part 4: Class A garments - Requirements |
24. |
EN 17092-5:2020 Protective garments for motorcycle riders - Part 5: Class B garments - Requirements |
25. |
EN 17092-6:2020 Protective garments for motorcycle riders - Part 6: Class C garments - Requirements |
26. |
EN 17109:2020 Mountaineering equipment - Individual safety systems for rope courses - Safety requirements and test methods |
27. |
EN 61482-2:2020 Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements |
28. |
EN ISO 20320:2020 Protective clothing for use in Snowboarding - Wrist Protectors - Requirements and test methods (ISO 20320:2020) |
29. |
EN 17353:2020 Protective clothing - Enhanced visibility equipment for medium risk situations - Test methods and requirements |
30. |
EN 469:2020 Protective clothing for firefighters - Performance requirements for protective clothing for firefighting activities |
31. |
EN ISO 27065:2017 Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017). EN ISO 27065:2017/A1:2019 |
32. |
EN 352-4:2020 Hearing protectors - Safety requirements - Part 4: Level-dependent earmuffs |
33. |
EN 352-5:2020 Hearing protectors - Safety requirements - Part 5: Active noise reduction earmuffs |
34. |
EN 352-6:2020 Hearing protectors - Safety requirements - Part 6: Earmuffs with safety-related audio input |
35. |
EN 352-7:2020 Hearing protectors - Safety requirements - Part 7: Level-dependent earplugs |
36. |
EN 352-8:2020 Hearing protectors - Safety requirements - Part 8: Entertainment audio earmuffs |
37. |
EN 352-9:2020 Hearing protectors - Safety requirements - Part 9: Earplugs with safety-related audio input |
38. |
EN 352-10:2020 Hearing protectors - Safety requirements - Part 10: Entertainment audio earplugs |
ANNEX II
No |
Reference of standard |
Date of withdrawal |
1. |
EN ISO 10819:2013 Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) |
19 November 2021 |
2. |
EN 343:2003+A1:2007 Protective clothing – Protection against rain EN 343:2003+A1:2007/AC:2009 |
19 November 2021 |
3. |
EN 358:1999 Personal protective equipment for work positioning and prevention of falls from a height – Belts for work positioning and restraint and work positioning lanyards |
19 November 2021 |
4. |
EN 381-5:1995 Protective clothing for users of hand-held chain saws – Part 5: Requirements for leg protectors |
19 November 2021 |
5. |
EN 381-7:1999 Protective clothing for users of hand-held chainsaws – Part 7: Requirements for chainsaw protective gloves |
19 November 2021 |
6. |
EN 381-9:1997 Protective clothing for users of hand-held chain saws – Part 9: Requirements for chain saw protective gaiters |
19 November 2021 |
7. |
EN 381-11:2002 Protective clothing for users of hand-held chainsaws – Part 11: Requirements for upper body protectors |
19 November 2021 |
8. |
EN 388:2016 Protective gloves against mechanical risks |
19 November 2021 |
9. |
EN 943-1:2015 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
19 November 2021 |
10. |
EN 12277:2015 Mountaineering equipment – Harnesses – Safety requirements and test methods |
19 November 2021 |
11. |
EN 13832-2:2006 Footwear protecting against chemicals – Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
19 November 2021 |
12. |
EN 13832-3:2006 Footwear protecting against chemicals – Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
19 November 2021 |
13. |
EN 14594:2005 Respiratory protective devices – Continuous flow compressed air line breathing apparatus – Requirements, testing, marking EN 14594:2005/AC:2005 |
19 November 2021 |
14. |
EN 50321-1:2018 Live working – Footwear for electrical protection – Insulating footwear and overboots |
19 November 2020 |
15. |
EN 469:2005 Protective clothing for firefighters - Performance requirements for protective clothing for firefighting activities EN 469:2005/A1:2006 EN 469:2005/AC:2006 |
5 September 2022 |
16. |
EN 1149-5:2008 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
5 September 2022 |
17. |
EN 13595-1:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one piece or divided suits — Part 1: General requirements |
5 September 2022 |
18. |
EN 13595-3:2002 Protective clothing for professional motorcycle riders — Jackets, trousers and one-piece or divided suits — Part 3: Test method for determination of burst strength |
5 September 2022 |
19. |
EN 1150:1999 Protective clothing — Visibility clothing for non-professional use — Test methods and requirements |
5 September 2022 |
20. |
EN 13356:2001 Visibility accessories for non-professional use — Test methods and requirements |
5 September 2022 |
21. |
EN ISO 27065:2017 Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017) |
5 September 2022 |
22. |
EN 352-1:2002 Hearing protectors - General requirements - Part 1: Ear-Muffs |
21 January 2023 |
23. |
EN 352-2:2002 Hearing protectors - General requirements - Part 2: Ear-plugs |
21 January 2023 |
24. |
EN 352-3:2002 Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet |
21 January 2023 |
25. |
EN 352-4:2001 Hearing protectors - Safety requirements and testing - Part 4: Level-dependent ear-muffs EN 352-4:2001/A1:2005 |
21 January 2023 |
26. |
EN 352-5:2002 Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs EN 352-5:2002/A1:2005 |
21 January 2023 |
27. |
EN 352-6:2002 Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input |
21 January 2023 |
28. |
EN 352-7:2002 Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs |
21 January 2023 |
29. |
EN 352-8:2008 Hearing protectors - Safety requirements and testing - Part 8: Entertainment audio ear-muffs |
21 January 2023 |
ANNEX III
No |
Reference of the standard |
1. |
EN 352-1:2020 Hearing protectors - General requirements - Part 1: Earmuffs Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. |
2. |
EN 352-2:2020 Hearing protectors - General requirements - Part 2: Earplugs Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. |
3. |
EN 352-3:2020 Hearing protectors - General requirements - Part 3: Earmuffs attached to head protection and/or face protection devices Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. |