Proposal for a COUNCIL REGULATION amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products /* COM/2012/0639 final - 2012/0302 (NLE) */
EXPLANATORY MEMORANDUM 1. CONTEXT OF THE PROPOSAL The Commission, assisted by the Economic
Tariff Questions Group (ETQG), has reviewed all requests for temporary
suspension of autonomous Common Customs Tariff duties forwarded by the Member
States. This proposal concerns a number of agricultural and industrial products.
The suspension requests were examined in the light of the criteria set out in
the Communication from the Commission concerning autonomous tariff suspensions
and quotas (OJ C 363, 13.12.2011, p. 6). Following this review, the
Commission considers that the suspension of duties is justified for the
products listed in Annex I of this proposal. Also, Annex I lists i) products
for which the wording of their description had to be changed, ii) products for
which a new CN or TARIC code became necessary, with their new description
and/or CN – TARIC code or iii) products which were reviewed and for which a new
date for mandatory review was set. Products for which suspension is no longer
in the Union's economic interests have to be withdrawn. Acordingly, Annex II
lists the products removed from the Annex to Regulation (EU) No 1344/2011
and products for which the wording of their description had to be changed, or
products for which a new CN or TARIC code became necessary, which are replaced
by new description and/or codes in Annex I. The proposal is in line
with the trade, entreprise, development and external relations policies. Particularly,
this proposal is not at the expense of countries enjoying a preferential
trading agreement with the EU (e.g. GSP, ACP regime, candidate countries and
potential candidates). 2. RESULTS OF CONSULTATIONS
WITH THE INTERESTED PARTIES AND IMPACT ASSESSMENTS The Economic Tariff Questions Group, in
which the competent authorities of all Member State are represented, was
consulted. All listed suspensions correspond to agreements or compromises
reached in the discussions of the group. There was no mention of potentially serious
risks with irreversible consequences. This proposal will follow an inter-service
consultation procedure and will be published after its adoption by the Council. 3. LEGAL ELEMENTS OF THE
PROPOSAL The legal basis of this regulation proposal
is Article 31 of the Treaty on the Functioning of the European Union. By virtue of Article 31 of the Treaty on
the Functioning of the European Union autonomous tariff suspensions and quotas
are approved by the Council acting by qualified majority on the basis of a
Commission proposal, therefore a regulation is the appropriate instrument. The proposal falls under the exclusive
competence of the Union. The proposal complies with the principle of
proportionality as this set of measures is in line with the principles set out
to simplify the procedures for the operators engaged in foreign trade and in
accordance with the Commission communication concerning autonomous tariff
suspensions and quotas (2011/C 363/02). 4. BUDGETARY IMPLICATION Uncollected customs duties of a total
amount of approximately 60,5 Mio €/year. The effect on the
traditional own resources of the budget is -45,4 Mio €/year (75% x 60,5 Mio €/year). 2012/0302 (NLE) Proposal for a COUNCIL REGULATION amending Regulation (EU) No 1344/2011
suspending the autonomous Common Customs Tariff duties on certain agricultural,
fishery and industrial products THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the
Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the
European Commission, Whereas: (1) It is in the interest of
the Union to suspend totally the autonomous Common Customs Tariff duties on a certain
number of new products currently not listed in the Annex to Council Regulation
(EU) No 1344/2011[1]. (2) As it is no longer in the
interest of the Union to maintain the suspension of autonomous Common Customs
Tariff duties for 39 of the products which are currently listed in the Annex to
Regulation (EU) No 1344/2011, those products should be deleted. (3) It is necessary to modify
the product description of 56 suspensions in the Annex to Regulation (EU) No 1344/2011
in order to take account of technical product developments and economic trends
on the market and also linguistic adaptations. Moreover, TARIC codes for two products
should be changed. In addition, for three products double classification is
considered necessary whereas for two products multiple classification is no
longer necessary. (4) Those suspensions for
which technical modifications are necessary should be deleted from the list of
suspensions in the Annex to Regulation (EU) No 1344/2011 and
should be reinserted in that list with new product descriptions, or new CN or
TARIC codes. (5) A number of products were
reviewed by the Commission in accordance with Article 2(2) and (3) of
Regulation (EU) No 1344/2011. It is in the interest of the Union to provide for
a new mandatory review of those products. The reviewed suspensions should therefore
be deleted from the list of suspensions in the Annex to
Regulation (EU) No 1344/2011 and reinserted in that list with
new time limits for a mandatory review. (6) In view of their temporary
nature, the suspensions listed in Annex I should be reviewed systematically, at
the latest five years after their application or renewal. Moreover, closure of
certain suspensions should be warranted at any time, as a result of a proposal
of the Commission on the basis of a review carried out on initiative of the Commission
or on request of one or more Member States if the suspensions are no longer in
the Union's interest to be maintained or due to technical product developments,
to changed circumstances or to economic trends on the market. (7) Since the suspensions laid
down in this Regulation have to take effect on 1 January 2013, this
Regulation should apply from that date and should enter into enter into force
immediately upon its publication in the Official Journal of the European
Union, HAS ADOPTED THIS REGULATION: Article 1 The Annex to Regulation (EU) No 1344/2011
is amended as follows: (1)
The rows for the products listed in Annex I to
this Regulation are inserted. (2)
The rows for the products for which the CN and
TARIC codes are set out in Annex II to this Regulation are deleted. Article 2 This Regulation shall enter into force on
the day of its publication in the Official Journal of the European Union. It shall apply from 1 January 2013. This Regulation shall be binding
in its entirety and directly applicable in all Member States. Done at Brussels, For
the Council The
President ANNEX I CN code || TARIC || Description || Rate of autonomous duty || Date foreseen for mandatory review ex 2008 60 19 ex 2008 60 39 || 30 30 || Sweet cherries containing added spirit, whether or not with a sugar content of 9 % by weight, of a diameter of not more than 19,9 mm, with stone, for use in chocolate products (1) || 10 % (2) || 30.06.2013 ex 2008 93 91 || 20 || Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries (3) || 0 % || 31.12.2017 ex 2008 99 49 ex 2008 99 99 || 70 11 || Blanched vine leaves of the genus Karakishmish, in brine containing: — 14 % or more but not more 16 % (± 2 %) of salt, — 0,2 % or more but not more than 0,3 % (± 0,1 %) of citric acid, and — 0,03 % or more but not more than 0,05 % (± 0,01 %) of sodium benzoate for use in the manufacture of stuffed vine leaves with rice (1) || 0 % || 31.12.2017 ex 2009 49 30 || 91 || Pineapple juice, other than in powder form: — with a Brix value of more than 20 but not more than 67, — a value of more than €30 per 100 kg net weight, — containing added sugars used in the manufacture of products of food or drink industry (1) || 0 % || 31.12.2014 ex 2805 19 90 || 10 || Lithium metal of a purity by weight of 99,7 % or more (CAS RN 7439-93-2) || 0 % || 31.12.2017 ex 2805 30 90 ex 2805 30 90 ex 2805 30 90 || 40 50 60 || Rare earth metals, scandium and yttrium of a purity by weight of 98,5 % or more || 0 % || 31.12.2015 ex 2816 40 00 || 10 || Barium hydroxide (CAS RN 17194-00-2) || 0 % || 31.12.2017 ex 2823 00 00 || 10 || Titanium dioxide (CAS RN 13463-67-7): — of a purity by weight of 99,9 % or more, — with an average grain-size of 1,2 μm or more but not more than 1,8 μm — with a specific surface of 5,0 m²/g or more, but not more than 7,5 m²/g || 0 % || 31.12.2017 ex 2823 00 00 || 20 || Titanium dioxide (CAS RN 13463-67-7) with a purity by weight of 99,7 % or more and containing by weight: — not more than 0,005 % of potassium and sodium combined (expressed as elemental sodium and elemental potassium), — not more than 0,01 % of phosphorus (expressed as elemental phosphorus), for use in the metallurgy (1) || 0 % || 31.12.2017 ex 2825 10 00 || 10 || Hydroxylammonium chloride (CAS RN 5470-11-1) || 0 % || 31.12.2017 ex 2825 60 00 || 10 || Zirconium dioxide (CAS RN 1314-23-4) || 0 % || 31.12.2017 ex 2835 10 00 || 10 || Sodium hypophosphite monohydrate (CAS RN 10039-56-2) || 0 % || 31.12.2017 ex 2837 20 00 || 20 || Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5) || 0 % || 31.12.2017 ex 2839 19 00 || 10 || Disodium disilicate (CAS RN 13870-28-5) || 0 % || 31.12.2017 ex 2841 80 00 || 10 || Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5) || 0 % || 31.12.2017 ex 2841 90 85 || 10 || Lithium cobalt(III) oxide with a cobalt content of at least 59 % (CAS RN 12190-79-3) || 0 % || 31.12.2017 ex 2850 00 20 || 30 || Titanium nitride with a particle size of not more than 250 nm (CAS RN 25583-20-4) || 0 % || 31.12.2017 ex 2904 90 95 || 40 || 4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2) || 0 % || 31.12.2017 ex 2905 19 00 || 70 || Titanium tetrabutanolate (CAS RN 5593-70-4) || 0 % || 31.12.2017 ex 2905 19 00 || 80 || Titanium tetraisopropoxide (CAS RN 546-68-9) || 0 % || 31.12.2017 ex 2908 99 00 || 40 || 4,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4) || 0 % || 31.12.2017 ex 2912 49 00 || 20 || 4-Hydroxybenzaldehyde (CAS RN 123-08-0) || 0 % || 31.12.2017 ex 2914 19 90 || 20 || Heptan-2-one (CAS RN 110-43-0) || 0 % || 31.12.2017 ex 2914 19 90 || 30 || 3-Methylbutanone (CAS RN 563-80-4) || 0 % || 31.12.2017 ex 2914 19 90 || 40 || Pentan-2-one (CAS RN 107-87-9) || 0 % || 31.12.2017 ex 2914 39 00 || 30 || Benzophenone (CAS RN 119-61-9) || 0 % || 31.12.2017 ex 2914 39 00 || 70 || Benzil (CAS RN 134-81-6) || 0 % || 31.12.2017 ex 2914 39 00 || 80 || 4’-Methylacetophenone (CAS RN 122-00-9) || 0 % || 31.12.2017 ex 2914 50 00 || 60 || 2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8) || 0 % || 31.12.2017 ex 2914 50 00 || 70 || 16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN 974-23-2) || 0 % || 31.12.2017 ex 2915 90 70 || 75 || 2,2-Dimethylbutyryl chloride (CAS RN 5856-77-9) || 0 % || 31.12.2017 ex 2916 12 00 || 60 || Octadecyl acrylate (CAS RN 4813-57-4) || 0 % || 31.12.2017 ex 2916 39 90 || 55 || 4-tert-Butylbenzoic acid (CAS RN 98-73-7 ) || 0 % || 31.12.2017 ex 2916 39 90 || 75 || m-Toluic acid (CAS RN 99-04-7) || 0 % || 31.12.2017 ex 2916 39 90 || 85 || (2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0) || 0 % || 31.12.2017 ex 2917 19 10 || 20 || Diethyl malonate (CAS RN 105-53-3) || 0 % || 31.12.2017 ex 2918 29 00 || 70 || Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) || 0 % || 31.12.2017 ex 2918 29 00 || 80 || Butyl 3,5-bis(1,1-dimethylethylene)-4-hydroxybenzenepropanoate (CAS RN 52449-44-2) || 0 % || 31.12.2017 ex 2920 19 00 || 10 || Fenitrothion (ISO) (CAS RN 122-14-5) || 0 % || 31.12.2013 ex 2921 19 60 || 10 || 2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9) || 0 % || 31.12.2017 ex 2921 30 99 || 30 || 1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6) || 0 % || 31.12.2015 ex 2921 42 00 || 86 || 2,5-Dichloroaniline of a purity by weight of 99,5 % or more (CAS RN 95-82-9) || 0 % || 31.12.2017 ex 2921 42 00 || 87 || N-Methylaniline (CAS RN 100-61-8) || 0 % || 31.12.2017 ex 2921 42 00 || 88 || 3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0) || 0 % || 31.12.2017 ex 2921 43 00 || 80 || 6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6) || 0 % || 31.12.2017 ex 2921 49 00 || 85 || 4-Isopropylaniline (CAS RN 99-88-7) || 0 % || 31.12.2017 ex 2921 59 90 || 30 || 3,3’-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9) || 0 % || 31.12.2017 ex 2921 59 90 || 60 || (2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8) || 0 % || 31.12.2017 ex 2922 49 85 || 20 || 3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0) || 0 % || 31.12.2017 ex 2922 49 85 || 60 || Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3) || 0 % || 31.12.2017 ex 2924 19 00 || 80 || Tetrabutylurea (CAS RN 4559-86-8) || 0 % || 31.12.2017 ex 2924 29 98 || 51 || Methyl 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate (CAS RN 59673-82-4) || 0 % || 31.12.2017 ex 2924 29 98 || 53 || 4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8) || 0 % || 31.12.2017 ex 2924 29 98 || 86 || Anthranilamide of a purity by weight of 99,5 % or more (CAS RN 88-68-6) || 0 % || 31.12.2017 ex 2925 19 95 || 20 || 4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9) || 0 % || 31.12.2017 ex 2925 19 95 || 30 || N,N'-(m-Phenylene)dimaleimide (CAS RN 3006-93-7) || 0 % || 31.12.2017 ex 2926 90 95 || 18 || Methyl cyanoacetate (CAS RN 105-34-0) || 0 % || 31.12.2017 ex 2927 00 00 || 80 || 4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7) || 0 % || 31.12.2017 ex 2928 00 90 || 75 || Metaflumizone (ISO) (CAS RN 139968-49-3) || 0 % || 31.12.2016 ex 2928 00 90 || 80 || Cyflufenamid (ISO) (CAS RN 180409-60-3) || 0 % || 31.12.2013 ex 2928 00 90 || 85 || Daminozide (ISO) with a purity by weight of 99 % or more (CAS RN 1596-84-5) || 0 % || 31.12.2016 ex 2930 20 00 || 10 || Prosulfocarb (ISO) (CAS RN 52888-80-9) || 0 % || 31.12.2017 ex 2930 90 99 || 66 || Diphenyl sulphide (CAS RN 139-66-2) || 0 % || 31.12.2017 ex 2930 90 99 || 67 || 3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid (CAS RN 120100-05-2) || 0 % || 31.12.2013 ex 2930 90 99 || 68 || Clethodim (ISO) (CAS RN 99129-21-2) || 0 % || 31.12.2017 ex 2930 90 99 || 71 || Triphenylsulphonium chloride (CAS RN 4270-70-6) || 0 % || 31.12.2013 ex 2930 90 99 || 83 || Methyl-p-tolyl sulphone (CAS RN 3185-99-7) || 0 % || 31.12.2017 ex 2931 90 90 || 14 || Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution || 0 % || 31.12.2017 ex 2932 20 90 || 20 || Ethyl 6'-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9'-xanthene]-2'-carboxylate (CAS RN 154306-60-2) || 0 % || 31.12.2017 ex 2932 20 90 || 40 || (S)-(−)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9) || 0 % || 31.12.2017 ex 2933 19 90 || 40 || Edaravone (INN) (CAS RN 89-25-8) || 0 % || 31.12.2013 ex 2933 19 90 || 80 || 3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5) || 0 % || 31.12.2017 ex 2933 29 90 || 40 || Triflumizole (ISO) (CAS RN 68694-11-1) || 0 % || 31.12.2013 ex 2933 39 99 || 12 || 2,3-Dichloropyridine (CAS RN 2402-77-9) || 0 % || 31.12.2017 ex 2933 39 99 || 18 || 6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0) || 0 % || 31.12.2017 ex 2933 39 99 || 55 || Pyriproxyfen (ISO) of a purity by weight of 97 % or more (CAS RN 95737-68-1) || 0 % || 31.12.2014 ex 2933 59 95 || 77 || 3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6) || 0 % || 31.12.2017 ex 2933 69 80 || 55 || Terbutryn (ISO) (CAS RN 886-50-0) || 0 % || 31.12.2015 ex 2933 79 00 || 30 || 5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0) || 0 % || 31.12.2017 ex 2933 99 80 || 18 || 4,4'-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-phenylaniline] (CAS RN 67707-04-4) || 0 % || 31.12.2017 ex 2933 99 80 || 22 || (2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4) || 0 % || 31.12.2017 ex 2933 99 80 || 24 || 1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3) || 0 % || 31.12.2017 ex 2933 99 80 || 28 || N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN 26848-40-8) || 0 % || 31.12.2017 ex 2933 99 80 || 50 || Metconazole (ISO) (CAS RN 125116-23-6) || 3.2 % || 31.12.2013 ex 2933 99 80 || 89 || Carbendazim (ISO) (CAS RN 10605-21-7) || 0 % || 31.12.2013 ex 2934 10 00 || 15 || 4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3) || 0 % || 31.12.2017 ex 2934 10 00 || 25 || (S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3) || 0 % || 31.12.2017 ex 2934 10 00 || 35 || (2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8) || 0 % || 31.12.2017 ex 2934 20 80 || 40 || 1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5) || 0 % || 31.12.2017 ex 2934 30 90 || 10 || 2-Methylthiophenothiazine (CAS RN 7643-08-5) || 0 % || 31.12.2017 ex 2934 99 90 || 12 || Morpholino phosphorodiamidate oligomers (morpholino oligonucleotides) intended for genetic research (1) || 0 % || 31.12.2017 ex 2934 99 90 || 14 || Ethyl N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-2-yl-b-alaninate (CAS RN 872728-84-2) || 0 % || 31.12.2017 ex 2934 99 90 || 15 || Carboxin (ISO) (CAS RN 5234-68-4) || 0 % || 31.12.2013 ex 2934 99 90 || 18 || 3,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) || 0 % || 31.12.2017 ex 2934 99 90 || 22 || 7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1) || 0 % || 31.12.2017 ex 2934 99 90 || 23 || Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2) || 0 % || 31.12.2016 ex 2934 99 90 || 74 || 2-Isopropylthioxanthone (CAS RN 5495-84-1) || 0 % || 31.12.2017 ex 2934 99 90 || 83 || Flumioxazin (ISO) of a purity by weight of 96 % or more (CAS RN 103361-09-7) || 0 % || 31.12.2014 ex 2934 99 90 || 84 || Etoxazole (ISO) of a purity by weight of 94,8 % or more (CAS RN 153233-91-1) || 0 % || 31.12.2014 ex 2942 00 00 || 10 || N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8) || 0 % || 31.12.2017 ex 3102 50 90 || 10 || Natural sodium nitrate (CAS RN 7631-99-4) || 0 % || 31.12.2017 ex 3204 11 00 || 70 || Dye C.I. Disperse Red 343 || 0 % || 31.12.2017 ex 3204 13 00 || 20 || (2,2'-(3,3'-Dioxidobiphenyl-4,4'-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate (CAS RN 159604-94-1) || 0 % || 31.12.2017 ex 3204 15 00 || 10 || Dye C.I. Vat Orange 7 (C.I. Pigment Orange 43) || 0 % || 31.12.2017 ex 3204 17 00 || 30 || Dye C.I. Pigment Yellow 97 || 0 % || 31.12.2017 ex 3204 17 00 || 80 || Dye C.I. Pigment Red 207 || 0 % || 31.12.2017 ex 3204 17 00 || 85 || Dye C.I. Pigment Blue 61 || 0 % || 31.12.2017 ex 3204 17 00 || 88 || Dye C.I. Pigment Violet 3 || 0 % || 31.12.2017 ex 3204 19 00 || 84 || Dye C.I. Solvent Blue 67 || 0 % || 31.12.2017 ex 3204 19 00 || 85 || Dye C.I. Solvent Red HPR || 0 % || 31.12.2017 ex 3208 90 19 ex 3208 90 91 || 25 20 || Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight || 0 % || 31.12.2017 ex 3208 90 19 || 75 || Acenaphthalene copolymer in ethyl lactate solution || 0 % || 31.12.2017 ex 3402 13 00 || 20 || Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated || 0 % || 31.12.2017 ex 3802 90 00 || 11 || Soda flux calcinated diatomaceous earth, acid washed, for use as filter aid in the manufacture of pharmaceutical and/or biochemical products || 0 % || 31.12.2017 ex 3808 91 90 || 10 || Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide || 0 % || 31.12.2013 ex 3808 91 90 || 50 || Spodoptera exigua nuclear polyhedrosis virus (SeNPV) in an aqueous glycerol suspension || 0 % || 31.12.2013 ex 3808 91 90 || 60 || Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3’-ethoxy-5,6-dihydro spinosyn J) and (3’-ethoxy- spinosyn L) || 0 % || 31.12.2017 ex 3808 92 90 || 10 || Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale || 0 % || 31.12.2013 ex 3808 93 15 || 10 || Preparation based on a concentrate containing by weight 45 % or more but not more than 55 % of the active herbicidal ingredient Penoxsulam as an aqueous suspension || 0 % || 31.12.2017 ex 3811 21 00 || 30 || Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process || 0 % || 31.12.2017 ex 3811 21 00 || 40 || Additives for lubricating oils, containing mineral oils, based on a mixture of dodecylphenol sulphide calcium salts (CAS RN 68784-26-9), used as a concentrated additive for the manufacture of engine oils through a blending process || 0 % || 31.12.2017 ex 3811 21 00 || 50 || Additives for lubricating oils, — based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0), — containing mineral oils, used as a concentrated additive for the manufacture of engine oils through a blending process || 0 % || 31.12.2017 ex 3811 21 00 || 60 || Additives for lubricating oils, containing mineral oils, — based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %, — with a total base number (TBN) of 280 or more but not more than 320, used as a concentrated additive for the manufacture of engine oils through a blending process || 0 % || 31.12.2017 ex 3811 21 00 || 70 || Additives for lubricating oils, — containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), — containing mineral oils, — with a chlorine content by weight of 0,05 % or more but not more than 0,25 %, — with a total base number (TBN) of more than 20, used as a concentrated additive for the manufacture of engine oils through a blending process || 0 % || 31.12.2017 ex 3811 29 00 || 10 || Additives for lubricating oils, consisting of reaction products of diphenylamine with branched nonene (CAS RN 36878-20-3 and CAS RN 27177-41-9), used as a concentrated additive for the manufacture of engine oils through a blending process || 0 % || 31.12.2017 ex 3811 29 00 || 20 || Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of engine oils through a blending process || 0 % || 31.12.2017 ex 3811 29 00 || 30 || Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process || 0 % || 31.12.2017 ex 3811 29 00 || 40 || Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,05 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of engine oils through a blending process || 0 % || 31.12.2017 ex 3811 29 00 || 50 || Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process || 0 % || 31.12.2017 ex 3811 90 00 || 30 || Solution of a (dimethylamino)methyl-derivative of polyisobutylene phenol, containing by weight 10 % or more but not more than 19,9 % petroleum naphtha || 0 % || 31.12.2017 ex 3811 90 00 || 40 || Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20 % or more but not more than 29,9 % 2-ethylhexanol || 0 % || 31.12.2017 ex 3815 90 90 || 16 || Initiator based on dimethylaminopropyl urea || 0 % || 31.12.2017 ex 3815 90 90 || 18 || Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO’)-, di[chloride(1-)], used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3) || 0 % || 31.12.2017 ex 3815 90 90 || 85 || Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins (1) || 0 % || 31.12.2017 ex 3815 90 90 || 89 || Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1) || 0 % || 31.12.2016 ex 3824 90 97 || 33 || Preparation, containing: — trioctylphosphine oxide (CAS RN 78-50-2), — dioctylhexylphosphine oxide (CAS RN 31160-66-4), — octyldihexylphosphine oxide (CAS RN 31160-64-2) and — trihexylphosphine oxide (CAS RN 9084-48-8) || 0 % || 31.12.2016 ex 3824 90 97 || 35 || Mixture of: — 3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) and — ethyl-6'-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9'-[9H]xanthene]-2’-carboxylate (CAS RN 154306-60-2) || 0 % || 31.12.2017 ex 3824 90 97 || 36 || Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0) || 0 % || 31.12.2017 ex 3824 90 97 || 37 || Liquid crystal mixture for use in the manufacture of displays (1) || 0 % || 31.12.2017 ex 3824 90 97 || 38 || Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses (1) || 0 % || 31.12.2017 ex 3824 90 97 || 41 || Preparation, consisting of: — dipropylene glycol — tripropylene glycol — tetrapropylene glycol and — pentapropylene glycol || 0 % || 31.12.2017 ex 3824 90 97 || 43 || Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators || 0 % || 31.12.2017 ex 3824 90 97 || 44 || Mixture of phytosterols, not in the form of powder, containing by weight: — 75 % or more of sterols, — not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters (1) || 0 % || 31.12.2017 ex 3824 90 97 || 70 || Paste containing by weight 75 % or more, but not more than 85 % of copper, and also containing inorganic oxides, ethyl cellulose and a solvent || 0 % || 31.12.2017 ex 3824 90 97 || 78 || Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder with a particle size not more than 300 µm, containing by weight: — 60 % or more, but not more than 80 % of sitosterols, — not more than 15 % of campesterols, — not more than 5 % of stigmasterols, — not more than 15 % of betasitostanols || 0 % || 31.12.2017 ex 3903 90 90 ex 3911 90 99 || 35 43 || Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 ºC || 0 % || 31.12.2013 ex 3903 90 90 || 86 || Mixture containing by weight: — 45 % or more but not more than 65 % of polymers of styrene — 35 % or more but not more than 45 % of poly(phenylene ether) — not more than 10 % of other additives and with one or more of the following special colour effects: — metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment — fluorescent, as characterized by emitting light during absorption of ultraviolet radiation — bright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale || 0 % || 31.12.2013 ex 3904 69 80 || 85 || Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers || 0 % || 31.12.2017 ex 3907 30 00 || 60 || Polyglycerol polyglycidyl ether resin (CAS RN 105521-63-9) || 0 % || 31.12.2017 ex 3907 60 80 || 50 || Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of: — not more than 75 µm of polyethylene, — not more than 50 µm of polyamide, — not more than 15 µm of polyethylene terephthalate and — not more than 9 µm of aluminium with a tensile strength of more than 70 N/15 mm and oxygen transmission rate of less than 0,1 cm³/m²/24 hrs at 0,1 MPa || 0 % || 31.12.2017 ex 3907 99 90 || 25 || Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol || 0 % || 31.12.2017 ex 3907 99 90 || 60 || Copolymer of terephthalic acid and isophthalic acid with bisphenol A || 0 % || 31.12.2017 ex 3908 90 00 || 60 || Copolymer consisting of: — hexanedioic acid — 12-aminododecanoic acid — hexahydro-2H-azepin-2-one, and — 1,6-hexanediamine || 0 % || 31.12.2017 ex 3909 40 00 || 20 || Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices (1) || 0 % || 31.12.2015 ex 3909 40 00 || 30 || Mixture of: — alkylphenol - formaldehyde resin, whether or not brominated, and — zinc oxide || 0 % || 31.12.2017 ex 3910 00 00 || 50 || Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum || 0 % || 31.12.2017 ex 3911 90 19 || 30 || Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide || 0 % || 31.12.2017 ex 3911 90 99 || 53 || Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4) || 0 % || 31.12.2017 ex 3911 90 99 || 57 || Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0) || 0 % || 31.12.2017 ex 3919 10 80 ex 3919 90 00 || 43 26 || Ethylene vinyl acetate film: — of a thickness of 100 µm or more, — coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester liner || 0 % || 31.12.2014 ex 3919 10 80 ex 3919 90 00 || 45 45 || Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm || 0 % || 31.12.2017 ex 3919 10 80 ex 3919 90 00 || 55 53 || Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 º of more than 25 N/cm (as determined by the ASTM D 3330 method) || 0 % || 31.12.2017 ex 3919 10 80 ex 3919 90 00 || 85 28 || Poly(vinyl chloride) or polyethylene or any other polyolefine film: — of a thickness of 65 µm or more, — coated on one side with an acrylic UV-sensitive adhesive and a polyester liner || 0 % || 31.12.2014 ex 3919 90 00 || 25 || Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner || 0 % || 31.12.2017 ex 3919 90 00 ex 9001 20 00 || 47 40 || Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side || 0 % || 31.12.2017 ex 3920 10 40 || 30 || Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalized polymers of ethylene, consisting of: — a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, — covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110 µm || 0 % || 31.12.2017 ex 3920 20 29 ex 3920 20 80 || 55 93 || Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of: — a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, — covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110 µm || 0 % || 31.12.2017 ex 3920 20 29 || 94 || Co-extruded trilayer film, — each layer containing a mixture of polypropylene and polyethylene, — containing not more than 3 % by weight of other polymers, — whether or not containing titanium dioxide in the core layer, — of an overall thickness of not more than 70 µm || 0 % || 31.12.2016 ex 3920 51 00 || 40 || Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690) || 0 % || 31.12.2013 ex 3920 62 19 ex 3920 62 19 || 41 43 || Poly(ethylene terephthalate) film, of a thickness of 18µm or more but not more than 25µm, having: — a shrinkage of 3,4 (± 0,1) % in the machine direction (as determined by the ASTM D 1204 method at 190°C for 20 min) and — a shrinkage of 0,3 (± 0,2) % in the transverse direction (as determined by the ASTM D 1204 method at 190°C for 20 min) || 0 % || 31.12.2013 ex 3920 62 19 ex 3920 62 19 || 80 82 || Poly(ethylene terephthalate) film of a thickness of not more than 20 µm, coated on both sides with a gas barrier layer consisting of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 µm || 0 % || 31.12.2017 ex 3920 79 90 || 10 || Cellulose acetyl butyrate film, whether or not combined with a polycarbonate layer, of a thickness of not more than 0,81 mm containing a micro-louvre with a typical viewing angle of 30 degrees measured on each side of the surface normal || 0 % || 31.12.2013 ex 3920 92 00 || 30 || Polyamide film of a thickness of not more than 20 µm, coated on both sides with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2 µm || 0 % || 31.12.2013 ex 5407 10 00 || 10 || Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4’–oxybis (phenyleneamine) || 0 % || 31.12.2017 ex 5603 11 10 ex 5603 11 90 || 20 20 || Nonwovens, not weighing more than 20 g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10 µm but not more than 20 µm in diameter) and the inner layer containing super-fine endless filaments (not less than 1 µm but not more than 5 µm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins (1) || 0 % || 31.12.2017 ex 5603 12 90 || 50 || Non-woven: — weighing 30 g/m2 or more, but not more than 60 g/m2, — containing fibres of polypropylene or of polypropylene and polyethylene, — whether or not printed, with: — on one side, 65 % of the total surface area having circular bobbles of 4mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35 % of the surface area being bonded, — and on other side a smooth untextured surface, for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles (1) || 0 % || 31.12.2017 ex 5603 12 90 ex 5603 13 90 ex 5603 92 90 ex 5603 93 90 || 70 70 40 10 || Non-wovens of polypropylene, — with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene, — with a weight of not more than 150 g/m2, — in the piece or simply cut into squares or rectangles, and — not impregnated || 0 % || 31.12.2013 ex 5603 92 90 ex 5603 94 90 || 70 40 || Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene || 0 % || 31.12.2013 ex 5603 92 90 ex 5603 93 90 || 80 50 || Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments: — a weight of 25 g/m2 or more but not more than 150 g/m2, — in the piece or simply cut into squares or rectangles, — not impregnated, — with cross-directional or machine-directional stretch properties for use in the manufacture of infant/child care products (1) || 0 % || 31.12.2016 ex 6909 19 00 || 15 || Ceramic ring with rectangular transversal section having an external diameter of 19 mm or more (+ 0,00 mm/- 0,10 mm) but not more than 29 mm (+ 0,00 mm/- 0,20 mm), an internal diameter of 10 mm or more (+ 0,00 mm/- 0,20 mm) but not more than 19 mm (+ 0,00 mm/-0,30 mm), a thickness variable from 2 mm (± 0,10 mm) to 3,70 mm (± 0,20 mm) and heat resistance 240 °C or more, containing by weight: — 90 % (± 1,5 %) of aluminium oxide — 7 % (± 1 %) of titanium oxide || 0 % || 31.12.2017 ex 7005 10 30 || 10 || Float glass: — of a thickness of 4,0 mm or more but not more than 4,2 mm, — with a light transmission of 91 % or more measured using a D-type light source, — coated on one surface with a fluorine doped tin dioxide reflective layer || 0 % || 31.12.2017 ex 7019 12 00 ex 7019 12 00 || 05 25 || Rovings ranging from 1 980 to 2 033 tex, composed of continuous glass filaments of 9 μm (± 0,5 µm) || 0 % || 31.12.2013 ex 7019 19 10 || 15 || Yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 µm (- 1 µm / + 1,5 µm) || 0 % || 31.12.2017 ex 7326 90 98 || 40 || TV pedestal stand with metal upper part for fixation and stabilization of TV cabinet case/body || 0 % || 31.12.2016 ex 7601 20 20 ex 7601 20 80 || 10 10 || Sheets and billets of secondary aluminium alloy containing lithium || 0 % || 31.12.2017 ex 7604 29 10 ex 7606 12 99 || 10 20 || Sheets and bars of aluminium-lithium alloys || 0 % || 31.12.2015 ex 7606 12 92 ex 7607 11 90 || 20 20 || Aluminium and magnesium alloy strip: — in rolls, — of a thickness of 0,14 mm or more but not more than 0,40 mm, — a width of 12,5 mm or more but not more than 359 mm, — a tensile strength of 285 N/mm2 or more, and — an elongation at break of 1 % or more, and containing by weight: — 93,3 % or more of aluminium, — 2,2 % or more but not more than 5 % of magnesium, and — not more than 1,8 % of other elements || 0 % || 31.12.2017 ex 7607 11 90 || 30 || Laminated aluminium foil with: — 99 % or more of aluminium, — a silica and water glass free hydrophilic coating, — a total thickness of not more than 0,120 mm, — a tensile strength of 100 N/mm² or more (as determined by test method ASTM E8), and — an elongation at break of 1 % or more || 0 % || 30.06.2013 ex 7607 20 90 || 10 || Aluminium laminated film of a total thickness of not more than 0,123 mm, comprising of a layer of aluminium of a thickness of not more than 0,040 mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries (1) || 0 % || 31.12.2017 ex 8102 10 00 || 10 || Molybdenum powder with — a purity by weight of 99 % or more and — a particle size of 1,0 µm or more, but not more than 5,0 µm || 0 % || 31.12.2017 ex 8108 90 30 || 20 || Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708 92 or 8714 10 00 (1) || 0 % || 31.12.2017 ex 8108 90 50 || 30 || Alloy of titanium and silicon, containing by weight 0,15 % or more but not more than 0,60 % of silicon, in sheets or rolls, for use in the manufacture of: — exhaust systems for internal combustion engines or — tubes and pipes of subheading 8108 90 60 (1) || 0 % || 31.12.2017 ex 8108 90 50 || 40 || Titanium-alloy sheets for the manufacture of structural parts of aircrafts (1) || 0 % || 31.12.2017 ex 8108 90 50 || 50 || Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8 % or more but not more than 1,2 % of copper and 0,4 % or more but not more than 0,6 % of niobium || 0 % || 31.12.2017 ex 8108 90 50 || 85 || Plates, sheets, strip and foil of non-alloyed titanium || 0 % || 31.12.2017 ex 8113 00 90 || 10 || Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits || 0 % || 31.12.2017 ex 8207 30 10 || 10 || Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles (1) || 0 % || 31.12.2017 ex 8407 33 00 ex 8407 90 80 ex 8407 90 90 || 10 10 10 || Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of: — self-propelled lawn mowers, with a seat of subheading 8433 11 51, and hand-operated lawn mowers of heading 8433 11 90, — tractors of subheading 8701 90 11, whose main function is that of a lawn mower, — four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 8433 20 10 or — snowploughs and snow blowers of subheading 8430 20 (1) || 0 % || 31.12.2017 ex 8408 90 43 ex 8408 90 45 ex 8408 90 47 || 30 20 30 || 4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having: — a capacity of not more than 3850 cm³, and — a rated output of 15 kW or more but not more than 55 kW, for use in the manufacture of vehicles of heading 8427 (1) || 0 % || 31.12.2017 ex 8411 99 00 || 30 || Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: — of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686, — with a heat-resistance of not more than 1 100 °C; — with a diameter of 30 mm or more, but not more than 80 mm; — with a height of 30 mm or more, but not more than 50 mm || 0 % || 31.12.2017 ex 8481 80 69 || 60 || Four-way reversing valve for refrigerants, consisting of: — a solenoid pilot valve — a brass valve body including valve slider and copper connections with a working pressure up to 4,5 MPa || 0 % || 31.12.2017 ex 8483 30 38 || 30 || Cylindrical bearing housing: — of precision-cast grey cast iron complying with standard DIN EN 1561, — with oil chambers, — without bearings, — with a diameter of 60 mm or more, but not more than 180 mm, — with a height of 60 mm or more, but not more than 120 mm, — whether or not with water chambers and connectors || 0 % || 31.12.2017 ex 8501 31 00 || 70 || DC motors, brushless, with: — an external diameter of 80 mm or more, but not more than 100 mm, — a supply voltage of 12 V, — an output at 20 °C of 300 W or more, but not more than 550 W, — a torque 20 °C of 2,90 Nm or more, but not more than 5,30 Nm, — a rated speed at 20 °C of 600 rpm or more, but not more than 1 200 rpm, — equipped with the rotor angle position sensor of resolver type or Hall effect type, of the kind used in power steering systems for cars || 0 % || 31.12.2017 ex 8501 33 00 ex 8501 40 80 ex 8501 53 50 || 30 50 10 || Electric drive for motor vehicles, with an output of not more than 315 kW, with: — an AC or DC motor whether or not with transmission, — power electronics || 0 % || 31.12.2016 ex 8501 62 00 || 30 || Fuel cell system — consisting of at least phosphoric acid fuel cells, — in a housing with integrated water management and gas treatment, — for permanent, stationary energy supply || 0 % || 31.12.2017 ex 8504 31 80 || 20 || Transformer for use in the manufacture of inverters in LCD modules (1) || 0 % || 31.12.2017 ex 8504 31 80 || 40 || Electrical transformers: — with a capacity of 1 kVA or less — without plugs or cables, for internal use in the manufacture of set top boxes and TVs (1) || 0 % || 31.12.2017 ex 8504 40 82 || 40 || Printed circuit board equipped with a bridge rectifier circuit and other active and passive components — with two output connectors — with two input connectors which are available and useable in parallel — able to switch between bright and dimmed operation mode — with an input voltage of 40V (+ 25 % -15 %) or 42 V (+ 25 % -15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or — with an input voltage of 230V (+20 % -15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or — with an input voltage of 120V (15 % -35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode — with an input current reaching 80 % of its nominal value within 20 ms — with an input frequency of 45 Hz or more, but not more than 65 Hz for 42V and 230V, and 45-70Hz for 120V versions — with an maximum inrush current overshoot of not more than 250 % of the input current — with a period of the inrush current overshoot of not more than 100ms — with an input current undershoot of not less than 50 % of the input current — with a period of the inrush current undershoot of not more than 20ms — with a presettable output current — with an output current reaching 90 % of its nominal pre-set value within 50 ms — with an output current reaching zero within 30 ms after removal of the input voltage — with an defined failure status in case of no-load or too-high load (end-of-life function) || 0 % || 30.06.2013 ex 8504 40 82 || 50 || Transformer in a housing with — a rated power of not more than 30 W — an input voltage of 90 V or more, but not more than 305 V — an input frequency of 47 Hz or more, but not more than 63 Hz — a constant current output of 350 mA or more, but not more than 1.050 mA — an inrush current of not more than 10 A — an operating temperature range of -20 °C or more, but not more than +65 °C, suitable for driving LEDs || 0 % || 31.12.2017 ex 8504 50 95 || 50 || Solenoid coil with — a power consumption of not more than 6 W, — an insulation resistance of more than 100 M ohms, and — an insert hole of 11,4 mm or more, but not more than 11,8 mm || 0 % || 31.12.2017 ex 8505 11 00 || 33 || Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with measurements of not more than 15mm × 10 mm × 2 mm, or in the shape of a disc with a diameter of not more than 90mm, whether or not containing a hole in the centre || 0 % || 31.12.2013 ex 8505 11 00 || 50 || Bars specifically shaped, intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions: — a length of 15 mm or more but not more than 52 mm, — a width of 5 mm or more but not more than 42 mm, of a kind to be used in the manufacture of electric servomotors for industrial automation || 0 % || 31.12.2017 ex 8505 11 00 || 60 || Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with — a diameter of not more than 45 mm, — a height of not more than 45 mm, of a kind used in the manufacture of permanent magnets after magnetisation || 0 % || 31.12.2017 ex 8507 60 00 || 40 || Batteries of ion-lithium electric accumulators rechargeable with: — a length of 1 203 mm or more, but not more than 1 297 mm, — a width of 282 mm or more, but not more than 772 mm, — a height of 792 mm or more, but not more than 839 mm, — a weight of 260 kg or more, but not more than 293 kg, — power of 22 kWh or 26 kWh, and — constituted of 24 or 48 modules || 0 % || 31.12.2017 ex 8507 60 00 || 50 || Modules for the assembly of batteries of ion lithium electric accumulators with: — a length of 298 mm or more, but not more than 408 mm, — a width of 33,5 mm or more, but not more than 209 mm, — a height of 138 mm or more, but not more than 228 mm, — a weight of 3,6 kg or more, but not more than 17 kg, and — a power of 485 kWh or more, but not more than 2 158 kWh || 0 % || 31.12.2017 ex 8507 60 00 || 55 || Lithium-ion accumulator in cylindrical form, with: — a base similar to an ellipse squeezed in the middle, — a length of 49 mm or more (not including terminals), — a width of 33,5 mm or more, — a thickness of 9,9 mm or more, — a rated capacity of 1,75 Ah or more, and — a rated voltage of 3,7 V, for the manufacture of rechargeable batteries (1) || 0 % || 31.12.2017 ex 8507 60 00 || 57 || Lithium-ion accumulator, cuboid in shape, with: — some of the corners rounded off, — a length of 76 mm or more (not including terminals), — a width of 54,5 mm or more, — a thickness of 5,2 mm or more, — a rated capacity of 3 100 mAh or more, and — a rated voltage of 3,7 V, for the manufacture of rechargeable batteries (1) || 0 % || 31.12.2017 ex 8507 90 80 || 70 || Cut plate of nickel-plated copper foil, with: — a width of 70 mm (± 5 mm), — a thickness of 0,4 mm (± 0,2 mm), — a length of not more than 55 mm, for use in the manufacture of lithium-ion electric vehicle batteries (1) || 0 % || 31.12.2016 ex 8518 29 95 || 30 || Loudspeakers of: — an impedance of 4 Ohm or more, but not more than 16 Ohm, — a nominal power of 2 W or more, but not more than 20 W, — with or without plastic bracket, and — with or without electric cable fitted with connectors, of a kind used for TV sets and video monitors manufacture || 0 % || 31.12.2017 ex 8522 90 80 || 96 || Hard disk drive, for incorporation in products of heading 8521 (1) || 0 % || 31.12.2017 ex 8528 59 40 || 20 || Liquid crystal display colour video monitor having a DC input voltage of 7 V or more but not more than 30 V, with a diagonal measurement of the screen of 33,2 cm or less, — either without housing, with back cover and mounting frame, — or with a housing specially designed for mounting, suitable for the incorporation into goods of Chapters 84 to 90 and 94 || 0 % || 31.12.2013 ex 8529 90 65 || 75 || Modules comprising at least semiconductor chips for: — the generation of driving signals for pixel addressing, or — driving addressing pixels || 0 % || 31.12.2017 ex 8529 90 92 || 47 || Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 µm × 12 µm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel || 0 % || 31.12.2014 ex 8529 90 92 || 50 || Colour LCD display panel for LCD monitors of heading 8528: — with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm, — with backlight, micro-controller, — with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface, — in a housing with or without a heat sink at the back of the housing, — without a signal-processing module, for use in the manufacture of vehicles of chapter 87 (1) || 0 % || 31.12.2015 ex 8536 69 90 || 81 || Pitch connector for use in the manufacture of LCD television reception apparatus (1) || 0 % || 31.12.2017 ex 8536 69 90 || 87 || D-subminiature (D-sub) type connectors, built into a plastic or metal housing, with 15 pins in 3 rows, for use in the manufacture of products falling within headings 8521 and 8528 (1) || 0 % || 31.12.2016 ex 8536 69 90 || 88 || Secure Digital (SD), CompactFlash, "Smart Card" and 64- pin PC-card female connectors, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1 000 V || 0 % || 31.12.2017 ex 8537 10 91 || 30 || Data processing and evaluation vehicle dashboard control module, operating through the CAN - bus protocol, containing at least: — microprocessor relays, — a stepper motor, — Electrically Erasable Programmable Read-Only (EEPROM) memory, and — other passive components (such as connectors, diodes, voltage stabilizer, resistors, capacitors, transistors), with a voltage of 13,5 V || 0 % || 31.12.2017 ex 8543 90 00 || 40 || Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back || 0 % || 31.12.2017 ex 8544 20 00 ex 8544 42 90 ex 8544 49 93 ex 8544 49 95 || 10 20 20 10 || PET/PVC insulated flexible cable with: — a voltage of not more than 60 V, — a current of not more than 1 A — a heat resistance of not more than 105 °C, — individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm), — a distance between conductors of not more than 0,5 mm and — a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm || 0 % || 31.12.2013 ex 8544 42 90 || 10 || Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with: — a voltage of 1,25 V (± 0,25 V) — connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm, — outer screening shielding, used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits || 0 % || 31.12.2013 ex 8548 90 90 || 50 || Filters with a ferromagnetic core, used to suppress high frequency noise in electronic circuits, for the manufacture of TV sets and monitors of heading 8528 (1) || 0 % || 31.12.2017 ex 8704 23 91 || 20 || Motor chassis with a self-ignition capacity of at least 8 000 cm³, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm (1) || 0 % || 31.12.2017 ex 9001 20 00 || 10 || Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film || 0 % || 31.12.2017 ex 9001 90 00 || 75 || Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules (1) || 0 % || 31.12.2017 ex 9002 11 00 || 20 || Lenses — measuring not more than 80 mm x 55 mm x 50 mm, — with a resolution of 160 lines/mm or better, and — with a zoom ratio of 18 times, of a kind used for the production of visualizers or live image cameras || 0 % || 31.12.2017 ex 9002 11 00 || 30 || Lenses — measuring not more than 180 mm x 100 mm x 100 mm at a maximum focal length of more than 200 mm, — with a resolution of 130 lines/mm or better, and — with a zoom ratio of 18 times of a kind used for the production of visualizers or live image cameras || 0 % || 31.12.2017 ex 9002 11 00 || 40 || Lenses — measuring not more than 125 mm x 65 mm x 65 mm, — with a resolution of 125 lines/mm or better, and — with a zoom ratio of 16 times of a kind used for the production of visualizers or live image cameras || 0 % || 31.12.2017 ex 9002 11 00 || 70 || Lenses — measuring not more than 180 mm×100 mm×100 mm at a maximum focal length of more than 200 mm, — with an etendue of 7 steradian mm² or better, and — with a zoom ratio of 16 times of a kind used for the production of visualizers or live image cameras || 0 % || 31.12.2017 ex 9032 89 00 || 40 || Digital valve controller for controlling liquids and gases || 0 % || 31.12.2017 ex 9405 40 39 || 30 || Electric light assembly containing: — printed circuit boards and — Light Emitting Diodes (LED) for the manufacture of backlight units for flat TV sets (1) || 0 % || 30.06.2013 (1) Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253 11.10.1993, p. 1). (2) The specific additional duty is applicable. (3) A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Article 308d of the Commission Regulation (EEC) No 2454/93. ANNEX II CN code || TARIC ex 2008 60 19 || 30 ex 2008 60 39 || 30 ex 2008 93 91 || 20 ex 2009 49 30 || 91 ex 2710 12 25 || 10 ex 2805 30 90 || 30 ex 2823 00 00 || 10 ex 2835 10 00 || 10 ex 2839 19 00 || 10 ex 2841 80 00 || 10 ex 2841 90 85 || 10 ex 2850 00 20 || 30 ex 2904 10 00 || 40 ex 2914 19 90 || 20 ex 2914 19 90 || 30 ex 2914 19 90 || 40 ex 2914 39 00 || 30 ex 2914 39 00 || 40 ex 2914 50 00 || 60 ex 2914 50 00 || 70 ex 2916 39 90 || 55 ex 2917 39 95 || 40 ex 2918 23 00 || 10 ex 2920 19 00 || 10 ex 2921 30 99 || 20 ex 2921 30 99 || 30 ex 2921 59 90 || 30 ex 2922 49 85 || 60 ex 2924 29 98 || 35 ex 2924 29 98 || 86 ex 2928 00 90 || 75 ex 2928 00 90 || 80 ex 2928 00 90 || 85 ex 2930 20 00 || 10 ex 2930 90 99 || 66 ex 2930 90 99 || 67 ex 2930 90 99 || 68 ex 2930 90 99 || 69 ex 2930 90 99 || 71 ex 2930 90 99 || 82 ex 2930 90 99 || 83 ex 2932 99 00 || 60 ex 2933 19 90 || 40 ex 2933 29 90 || 40 ex 2933 39 99 || 55 ex 2933 69 80 || 35 ex 2933 69 80 || 55 ex 2933 79 00 || 30 ex 2933 99 80 || 50 ex 2933 99 80 || 73 ex 2933 99 80 || 89 ex 2934 20 80 || 40 ex 2934 99 90 || 15 ex 2934 99 90 || 23 ex 2934 99 90 || 74 ex 2934 99 90 || 78 ex 2934 99 90 || 83 ex 2934 99 90 || 84 ex 3204 15 00 || 10 ex 3204 17 00 || 30 ex 3204 17 00 || 75 ex 3208 90 19 || 75 ex 3208 90 91 || 10 ex 3402 13 00 || 20 ex 3808 91 90 || 10 ex 3808 91 90 || 50 ex 3808 92 90 || 10 ex 3808 93 15 || 10 ex 3808 93 27 || 20 ex 3815 19 90 || 41 ex 3815 90 90 || 16 ex 3815 90 90 || 85 ex 3815 90 90 || 89 ex 3824 90 97 || 33 ex 3824 90 97 || 36 ex 3824 90 97 || 37 ex 3824 90 97 || 38 ex 3824 90 97 || 44 ex 3824 90 97 || 47 ex 3824 90 97 || 70 ex 3824 90 97 || 78 ex 3901 10 10 || 10 ex 3901 20 90 || 30 ex 3903 90 90 || 35 ex 3903 90 90 || 86 ex 3906 10 00 || 10 ex 3907 99 90 || 60 ex 3909 40 00 || 20 ex 3910 00 00 || 50 ex 3911 90 19 || 30 ex 3919 10 80 || 45 ex 3919 10 80 || 55 ex 3919 90 00 || 25 ex 3919 90 00 || 26 ex 3919 90 00 || 28 ex 3919 90 00 || 45 ex 3919 90 00 || 47 ex 3919 90 00 || 53 ex 3919 90 00 || 55 ex 3920 20 29 || 94 ex 3920 51 00 || 10 ex 3920 51 00 || 40 ex 3920 62 19 || 41 ex 3920 62 19 || 43 ex 3920 62 19 || 80 ex 3920 62 19 || 82 ex 3920 79 90 || 10 ex 3920 92 00 || 30 ex 5407 10 00 || 10 ex 5603 11 10 || 20 ex 5603 11 90 || 20 ex 5603 12 90 || 50 ex 5603 12 90 || 70 ex 5603 13 90 || 70 ex 5603 92 90 || 40 ex 5603 92 90 || 70 ex 5603 92 90 || 80 ex 5603 93 90 || 10 ex 5603 93 90 || 50 ex 5603 94 90 || 40 ex 7005 10 25 || 10 ex 7005 10 30 || 10 ex 7006 00 90 || 60 ex 7007 19 20 || 20 ex 7326 90 98 || 40 ex 7410 22 00 || 10 ex 7601 20 99 || 10 ex 7604 29 10 || 10 ex 7606 12 92 || 20 ex 7606 12 99 || 20 ex 7607 11 90 || 20 ex 7607 11 90 || 30 ex 7607 20 90 || 10 ex 8108 90 30 || 20 ex 8108 90 50 || 30 ex 8108 90 50 || 40 ex 8108 90 50 || 50 ex 8113 00 90 || 10 ex 8407 31 00 || 10 ex 8407 33 00 || 10 ex 8407 90 80 || 10 ex 8407 90 90 || 10 ex 8412 21 80 || 50 ex 8419 89 98 || 30 ex 8419 89 98 || 40 ex 8462 21 80 || 10 ex 8477 59 80 || 10 ex 8501 33 00 || 30 ex 8501 40 80 || 50 ex 8501 53 50 || 10 ex 8504 31 80 || 20 ex 8504 40 82 || 40 ex 8505 11 00 || 33 ex 8507 90 80 || 70 ex 8522 90 80 || 96 ex 8528 59 40 || 20 ex 8529 90 49 || 10 ex 8529 90 65 || 75 ex 8529 90 65 || 80 ex 8529 90 92 || 46 ex 8529 90 92 || 47 ex 8529 90 92 || 50 ex 8529 90 92 || 60 ex 8536 69 90 || 81 ex 8536 69 90 || 87 ex 8540 91 00 || 95 ex 8543 90 00 || 40 ex 8544 42 90 || 10 ex 8544 49 93 || 20 ex 8704 23 91 || 20 ex 9001 20 00 || 10 ex 9001 20 00 || 40 ex 9001 90 00 || 75 ex 9032 10 89 || 20 ex 9032 89 00 || 40 ex 9405 40 39 || 30 LEGISLATIVE FINANCIAL STATEMENT 1. NAME OF THE PROPOSAL: Proposal for a Council Regulation amending
Regulation (EU) No 1344/2011 suspending the autonomous Common
Customs Tariff duties on certain agricultural, fishery and industrial products 2. BUDGET LINES: Chapter and Article: Chapter 12, Article 120 Amount
budgeted for the year 2013: 18 631 800 000 € (DB 2013) 3. FINANCIAL IMPACT: ¨ Proposal has no financial implications X Proposal has no financial impact on
expenditure but has a financial impact on revenue – the effect is as follows: (€ million to one decimal place) Budget line || Revenue[2] || 12 month period, starting dd/mm/aaaa || [Year: 2013] Article 120 || Impact on own resources || 01/1/2013 || - 45,4 (€ million to one decimal place) Situation following action || [2014 – 2017] Article 120 || - 45,4 / year 4. ANTI-FRAUD MEASURES Checks on the end-use of some of the products
covered by this Council Regulation will be carried out in accordance with
Articles 291 to 300 of Commission Regulation (EEC) No 2454/93. 5. OTHER REMARKS This proposal contains the amendments which
must be made to the Annex to the existing Regulation in order to take account
of the following: 1. new requests for suspension which have
been presented and accepted; 2. technical product developments and
economic trends on the market resulting in the lifting of certain existing
suspensions. Addition This Annex, in addition to the amendments
resulting from description, code changes or prolongations, contains 89 new products.
The uncollected duties corresponding to these suspensions, calculated on the
basis of requesting Member State projections for the period 2013 to 2017, amount
to 34 MEUR/year. On the basis of the existing statistics for
preceding years, it would appear, however, necessary to increase this amount by
an average factor, estimated at 1,8 to take account of imports into other
Member States using the same suspensions. This means a uncollected duties loss
of revenue of some 61,2 MEUR /year. Withdrawal: 38 products have been withdrawn from this Annex
reflecting the reintroduction of customs duties. This represents an increase of
MEUR 0,7 in resources, as estimated on the basis of 2012 statistics. Estimated cost of this operation On the basis of the above, the impact on the loss
of revenue resulting from this Regulation may be estimated at 61,2 – 0,7 = 60,5 MEUR (gross
amount, including collection costs) x 0,75 = 45,7 MEUR/year for
the period 01.01.2013 - 31.12.2017. [1] OJ L 349, 31.12.2011, p. 1. [2] Regarding traditional own resources (agricultural
duties, sugar levies, customs duties) the amounts indicated must be net amounts,
i.e. gross amounts after deduction of 25 % of collection costs