|
Official Journal |
EN L series |
|
2026/2376 |
29.10.2026 |
COMMISSION REGULATION (EU) 2026/2376
of 28 October 2026
amending Regulation (EU) 2022/1616 as regards the management of the Union register, compliance documentation, test methods, and documents to be presented upon release for free circulation
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1935/2004 of the European Parliament and of the Council of 27 October 2004 on materials and articles intended to come into contact with food and repealing Directives 80/590/EEC and 89/109/EEC (1), and in particular Article 5(1), second subparagraph, points (h), (i) and (k), thereof,
Whereas:
|
(1) |
Commission Regulation (EU) 2022/1616 (2) lays down rules on development and suitability of recycling technologies and authorisation of recycling processes, as well as on the manufacturing, marketing and use of plastic materials and articles containing plastic originating from waste. |
|
(2) |
The experience gained since the entry into force of that Regulation shows that the rules in regard to the registration of recycling installations need to be laid down in more detail and the use of compliance documentation in the supply chain need to be clarified. |
|
(3) |
Regulation (EU) 2022/1616 requires that recyclers and converters issue a declaration of compliance. The Declaration described in Part A of Annex III (Declaration A) is to be provided by recyclers, while the Declaration described in Part B of Annex III (Declaration B) is to be provided by converters. However, to allow all business operators in the supply chain to verify and ensure compliance with Regulation (EU) 2022/1616, maintain traceability and facilitate the work of the competent authorities, a declaration of compliance should be provided by operators also at other manufacturing stages within the supply chain other than to consumers. Yet, to avoid excessive burden on operators at the end of the supply chain, food business operators that use plastic with recycled content to pack food should not be obliged to provide a declaration of compliance where they provide the necessary instructions and information on recycled content by means of labelling. |
|
(4) |
In accordance with Article 16 of Regulation (EC) No 1935/2004, when issuing a declaration of compliance, operators are to have available supporting documentation demonstrating compliance. In order to facilitate compliance with this obligation, it is appropriate to clarify that for the purposes of Regulation (EU) 2022/1616 such documentation should comprise declarations received from previous manufacturing stages and other documentation concerning the compliance of the recycled plastic with Regulation (EU) 2022/1616, and that it should be available already at the time when operators issue their declaration of compliance and be submitted to the competent authority, upon its request, within ten working days. |
|
(5) |
Experience shows that indicating batch numbers in the declaration of compliance to be provided to converters and operators using recycled plastic at its final production stage, is complex and it is not needed after the point in the manufacturing chain where the composition of the plastic is not further modified since the traceability can then be adequately ensured based on the received declarations of compliance. Thus, converters and operators using post-processed recycled plastic at its final production stage should be allowed to issue a simplified declaration (‘Declaration C’), without assigning new batch numbers, and adapted to the final manufacturing stages. However, to ensure efficient enforcement, such declaration should list the recycling installations used in the manufacture of the constituent parts of the articles made of recycled content. |
|
(6) |
In order for recyclers receiving partially pre-processed plastic input and plastic input and for competent authorities to ascertain whether the plastic input is compliant with Regulation (EU) 2022/1616 and to trace it in case there are questions over its quality or origin, a Declaration of compliance should be issued at all marketing stages of pre-processing stages and for resulting batches of plastic input. This declaration should be referred to as Declaration P. The respective batches should be labelled with a batch number to facilitate their identification. |
|
(7) |
Commission Regulation (EU) No 10/2011 (3) allows the reprocessing of off-cuts and scraps. Regulation (EU) 2022/1616 does not explicitly allow for it. However, as such reprocessing may also be carried out with off-cuts and scraps of recycled plastic, rules in this regard should be laid down in accordance with the principles set out in Regulation (EU) No 10/2011. |
|
(8) |
Plastic waste, partially pre-processed plastic input, plastic input, recycled plastic, partially post-processed recycled plastics, recycled plastic materials and articles and products made thereof are increasingly imported into the Union, and are to comply with Regulation (EU) 2022/1616 when placed on the Union market. To prevent that non-compliant plastic materials and articles with recycled content are released into free circulation on the Union market, and to maintain traceability of the origin of the imported materials, Union’s customs authorities should receive the relevant declaration of compliance as required by Regulation (EU) 2022/1616 at the time the release into free circulation on the Union market is requested. To this purpose it is appropriate to introduce commodity codes for those plastics. However, introducing commodity codes for all recycled plastics at different stages of their manufacturing chain would require detailed differentiation for individual polymers, packed foods and certain other products such as appliances, as well differentiation to marketing stages. This would require the introduction of very many codes, which would be burdensome and increase the risk of misinterpretation at the border. Considering the number of codes that would be required and that only polyethylene terephthalate (‘PET’) is presently produced with a suitable technology and subject to recycled content targets under Union environmental legislation such codes should only be introduced for kitchenware and tableware and for PET including if part of multi-layer materials, but not for packed food, appliances and food processing equipment even if packed in or manufactured from PET. |
|
(9) |
In order to facilitate the task of the customs authorities, and to prevent misidentification and fraud, declarations of compliance supplied with plastic with recycled content that originates from third countries should mention the commodity codes used to import recycled plastic materials in accordance with the Union customs legislation. |
|
(10) |
The registration status of decontamination installations has significant impact on the respective use of those installations and is an important safeguard to avoid the placement of unsafe recycled plastic on the Union market. However, the full implementation of the registration status in accordance with Article 24(2), point (g) of Regulation (EU) 2022/1616 is hindered by the lack of clearly defined procedures and the list of possible statuses of installation in the Register does not allow to distinguish between different scenarios and needs to be completed to reflects all possible situations during the lifecycle of an installation. Furthermore, the current registration also does not allow operators and competent authorities to change the status when the use of an installation changes, which slows down its implementation administratively and increases the risks for mistakes. Therefore, it is important for the management of the Union register of novel technologies, recyclers, recycling processes, recycling schemes and decontamination installations (‘the Register’) to facilitate the access to the system for operators and competent authorities by creating an electronic registration system where operators are to enter and modify directly their respective information under the competent authorities’ supervision. |
|
(11) |
There are currently no defined rules as regards the detailed specifications of pre-processed plastic input such as those reported in appendix A to opinions concerning recycling processes that the European Food Safety Authority publishes. In order to ensure safety, maximum limits concerning these specifications and methods to verify compliance should be laid down. A method for this purpose is already provided for in Annex A of ISO 12418-2:2012 which should be considered as appropriate for this purpose. Further methods for the same purpose are being developed and should also be allowed provided that they have an equal or better performance. |
|
(12) |
Regulation (EU) 2022/1616 should therefore be amended accordingly. |
|
(13) |
In order to allow operators to adapt to the changes established with this Regulation but considering that those changes are necessary to protect human health and are of an administrative nature only, products complying with Regulation (EU) 2022/1616, as applicable before the date of the entry into force of this Regulation, and for which Declarations A or B are required should be allowed to be placed on the market for a period of three months after the entry into force of this Regulation even if they do not comply with the rules concerning those Declarations laid down in this Regulation. However, as operators need information from earlier stages to issue Declaration C and a declaration was not required at pre-processing stages before, products complying with Regulation (EU) 2022/1616, as applicable before the date of the entry into force of this Regulation, and for which this Regulation requires Declarations C or P, should be allowed to be placed on the market without those declarations for a period of six months after the entry into force of this Regulation. In order to ensure a smooth transition, it should be possible to manufacture recycled plastic materials and articles from such products placed on the market during the transitional periods and place them on the market until exhaustion of stocks. |
|
(14) |
The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed, |
HAS ADOPTED THIS REGULATION:
Article 1
Amendments to Regulation (EU) 2022/1616
Regulation (EU) 2022/1616 is amended as follows:
|
(1) |
Article 2(3) is amended as follows:
|
|
(2) |
in Article 4, paragraph 8 is replaced by the following: ‘8. The registration status indicated in the register established by Article 24 for the decontamination installation at the time of manufacture of each batch of recycled plastic contained in the recycled plastic material or article shall be either “newly registered”, “being established” or “active”.’ |
|
(3) |
Article 5 is amended as follows:
|
|
(4) |
the following Article 5a is inserted: ‘Article 5a Requirements for compliance documentation 1. At marketing stages other than the retail stage, business operators shall provide a declaration of compliance in accordance with Article 16 of Regulation (EC) No 1935/2004 for materials and articles subject to this Regulation. 2. Business operators shall establish the declarations of compliance referred to in paragraph 1 in accordance with Article 29. 3. Business operators shall only accept plastic materials, articles or food with packaging subject to this Regulation, that are accompanied by the appropriate declaration of compliance. 4. By derogation to paragraph 1, food business operators that use products with recycled content to pack food shall not be obliged to provide a declaration of compliance to retailers and to the distributors supplying to retailers where all the following conditions are met:
In this case paragraph 3 shall not apply. Upon request from a competent authority, or from a retailer or distributor it supplies to, a food business operator that uses recycled plastic materials and articles to pack food shall provide within ten working days from the request, where the request is made in the context of a control by a competent authority, or otherwise within twenty working days from the request, one of the following declarations of compliance:
5. Business operators shall ensure that supporting documentation to demonstrate that the products that they place on the market comply with the requirements of this Regulation is stored in their documentation systems at the time of issuance of the declaration of compliance. In case of recycled plastic, the documentation shall include all relevant records kept in accordance with Article 7(4). Supporting documentation shall be made available within ten working days to competent authorities on their request. 6. A declaration of compliance may be provided as a signed digital document, provided that it can be made available without delay as a single document that can be read and printed with commonly available software. 7. The release into free circulation of the following products is subject to the presentation to the customs authorities of the documentation listed in Table 6 of Annex I, under the specified commodity codes:
|
|
(5) |
Article 7 is amended as follows:
|
|
(6) |
Article 8 is amended as follows:
|
|
(7) |
Article 9 is amended as follows:
|
|
(8) |
Article 10 is amended as follows:
|
|
(9) |
Article 24 is amended as follows:
|
|
(10) |
the following Article 24a is inserted: ‘Article 24a Electronic registration system 1. For the purpose of the management of the Register, a non-public electronic registration system shall be used by competent authorities and operators. The electronic registration system shall contain the information specified in Article 10(2) and Article 24(2) and (4), as well as a contact information including contact persons, a list of competent authorities, and any other information that is necessary for the purpose of managing the Register. Competent authorities shall be able to modify the information regarding the “operators”, “facilities”, “decontamination installations”, developers of “novel technologies” and entities managing “recycling schemes” located in their territory. Only competent authorities from Member States shall be able to read all information kept in the electronic registration system. 2. Competent authorities shall ensure the completeness and the accuracy of the information contained in the electronic registration system regarding the “operators”, “facilities”, “decontamination installations”, developers of “novel technologies” and entities managing “recycling schemes” located in their territory.’ |
|
(11) |
Article 25 is replaced by the following: ‘Article 25 Registration of recyclers and decontamination installations 1. At least 30 working days prior to the start date of the production of recycled plastic in a decontamination installation, the recycler shall register the installation using the electronic registration system referred to Article 24a(2) stating the following information:
2. The name of the decontamination installation shall include the process name of the recycling process on which basis it operates. The process name shall be one of the following:
3. Following completion of the registration according to paragraph 1, the registration status shall become “newly registered” and Article 26 shall apply. 4. The recycler shall communicate in the electronic registration system the start date of the production of recycled plastic by the day in which that manufacture begins.’ |
|
(12) |
Article 26 is amended as follows:
|
|
(13) |
the following Article 26a is inserted: ‘Article 26a Deactivation and decommissioning of decontamination installations and change of the recycling process operated 1. The status of a decontamination installation shall become “inactive” automatically in either of the following cases:
The competent authority and the recycler shall be automatically warned 30, 10 and 3 days before the status of an installation becomes “inactive”. 2. The status of a decontamination installation shall become “decommissioned” automatically six months after the date on which it has become “inactive” pursuant to paragraph 1. The procedure set out in paragraph 4, second subparagraph, shall apply. The Commission, the competent authority, and the recycler shall be automatically warned 30, 10 and 3 days before the status of an installation becomes “decommissioned”. 3. A recycler may change the registration status of a decontamination installation to “inactive” provided that the registration status has been “active” or “being-established” for at least five consecutive months directly prior to that change. 4. After at least six months from the date on which the status became “inactive” in accordance with paragraph 3, the recycler may resume its recycling activity using the decontamination installation. Where the inactive period lasted for less than 20 months, the registration status shall change automatically to the same status it had before becoming “inactive”. If the status prior to the change was “being-established”, the expiry date of the one-year period referred to in Article 26(5) shall be delayed by the duration of the period in which the status was “inactive”. Where the inactive period lasted for 20 months or more, the registration status shall change to “being-established”. The procedure laid down in Article 26 shall apply and the start date of the production shall be the day of the change of the registration status to “being established”. 5. When the recycler does not longer operate a decontamination installation, it shall change its registration status to “decommissioned”. One year after the date of the status change to “decommissioned”, the entry concerning the decontamination installation shall be deleted automatically from the Register pursuant to Article 24(6)(b). 6. If a decontamination installation, the registration status of which has been changed to “decommissioned” in accordance with paragraph 4, is planned to be operated according to a new recycling process, the recycler shall register it under a different name in accordance with Article 26 at least one day prior to the start of the production. 7. In case a decontamination installation is used for the manufacture of recycled plastic based on more than one recycling process, the installation shall be registered in accordance with Article 26 for each recycling process it is used for.’ |
|
(14) |
Article 27 is replaced by the following: ‘Article 27 Official controls of recycling installations Official controls of recycling installations and recyclers shall include in particular audits in accordance with Article 14, point (i), of Regulation (EU) 2017/625.
|
|
(15) |
Article 29 is replaced by the following: ‘Article 29 Specific requirements for declarations of compliance 1. When partially pre-processed plastic input and plastic input is placed on the market in the Union, batches shall be accompanied by a declaration of compliance stating that the conditions and requirements set out in Article 6 are met and in accordance with the description and template set out in Part P of Annex III. This declaration shall be referred to as “Declaration P”. 2. When recycled plastic is placed on the market in the Union, every batch directly originating from a decontamination process that has not been post-processed shall be accompanied by a declaration of compliance in accordance with the description and template set out in Part A of Annex III. This declaration of compliance shall be referred to as “Declaration A” and shall be issued by the recycler. 3. When recycled plastic is placed on the market and is originating from post-processing operations, batches shall be accompanied by a declaration of compliance in accordance with the description and the template set out in Part B of Annex III. This declaration of compliance shall be referred to as “Declaration B” and shall be issued by the converter that manufactured the batch. In case a converter issuing Declaration B also performs the decontamination operations, it should ensure that a record equivalent to Declaration A is stored in its documentation system. 4. By way of derogation from paragraph 3, recycled plastic the composition of which is not to be changed in subsequent processing operations may be accompanied by a declaration of compliance in accordance with the description and the template set out in Part C of Annex III. This declaration of compliance shall be referred to as “Declaration C”. Declaration C may be issued only by an operator that has received either Declaration A or Declaration B from its supplier, or by an operator that internally issued and stored in its documentation system a record at least equivalent to either a signed Declaration A or a signed Declaration B. Declaration C shall accompany recycled plastic materials and articles at all remaining marketing stages at which a Declaration shall be provided in accordance with this Regulation. The composition of recycled plastic materials and articles accompanied by Declaration C shall not be intentionally modified during any subsequent marketing stage. The addition of substances to the recycled plastic during subsequent marketing stages by up to 1 % (w/w) in total shall not be considered as a change. The added amount at each subsequent stage shall be indicated in Declaration C. For the purposes of this paragraph, the composition of recycled plastic materials and articles shall be considered as not being changed by thermoforming and cutting of sheets, blowing of containers from pre-forms, attaching labels and caps, filling with food, labelling, closing, glueing and cutting and other operations that do not modify the chemical composition of the recycled plastic material. 5. Operators carrying out operations that do not change the composition of a recycled plastic material or article may pass on the declaration of compliance that they received with the recycled plastic material or article from their supplier to the next operator in the supply chain, without issuing their own declaration. 6. Declarations A, B and C shall include appropriate instructions based on the specifications, requirements or restrictions set out for the recycling technology applied and, where applicable, for the recycling process used, as well as on the instructions provided in Annex III. 7. Operators shall make available to competent authorities upon request the declaration of compliance that they received from their supplier.’ |
|
(16) |
Annexes I and III are amended in accordance with the Annex to this Regulation. |
Article 2
Transitional measures
1. Products complying with Regulation (EU) 2022/1616, as applicable before the date of the entry into force of this Regulation, and for which Declarations A or B are required may be placed on the market until 18 February 2027 even if they do not comply with the rules concerning those Declarations laid down in this Regulation.
2. Products complying with Regulation (EU) 2022/1616, as applicable before the date of the entry into force of this Regulation, and for which this Regulation requires Declarations C or P, may be placed on the market without those declarations until 18 May 2027.
3. Recycled plastic materials and articles manufactured from products placed on the market in accordance with paragraphs 1 or 2 may be placed on the market until exhaustion of stocks.
Article 3
Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 28 October 2026
For the Commission
The President
Ursula VON DER LEYEN
(1) OJ L 338, 13.11.2004, p. 4, ELI: http://data.europa.eu/eli/reg/2004/1935/oj.
(2) Commission Regulation (EU) 2022/1616 of 15 September 2022 on recycled plastic materials and articles intended to come into contact with foods, and repealing Regulation (EC) No 282/2008 (OJ L 243, 20.9.2022, p. 3, ELI: http://data.europa.eu/eli/reg/2022/1616/oj).
(3) Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food (OJ L 12, 15.1.2011, p. 1, ELI: http://data.europa.eu/eli/reg/2011/10/oj).
ANNEX
Annexes I and III to Regulation (EU) 2022/1616 are amended as follows:
|
(1) |
Annex I is amended as follows:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
(2) |
Annex III is replaced by the following: ‘ANNEX III Templates for declarations of compliance Information given in Part A to Part C and in Part P in italic font is for explanation only and shall be left out of any fillable field in a Declaration issued in accordance with this Regulation. All fields in these templates shall be filled, unless stated otherwise in the field. PART P Declaration P: Declaration to be used by operators in accordance with Article 6(1)
Instructions for Section 2; for the purposes of fields 2.1 and 2.2 of this Declaration:
PART A Declaration A: Declaration of compliance to be used by recyclers in accordance with Article 29(2)
PART B Declaration B: Declaration of compliance to be used by converters in accordance with Article 29(3)
PART C Declaration C: Declaration of compliance to be used by operators in accordance with Article 29(4)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ELI: http://data.europa.eu/eli/reg/2026/2376/oj
ISSN 1977-0677 (electronic edition)