Official Journal
of the European Union
EN
L series
|
|
Official Journal |
EN L series |
|
2026/1279 |
16.6.2026 |
COMMISSION IMPLEMENTING DECISION (EU) 2026/1279
of 12 June 2026
on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council and repealing Commission Implementing Decision (EU) 2023/941
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (1), and in particular Article 10(6) thereof,
Whereas:
|
(1) |
In accordance with Article 14 of Regulation (EU) 2016/425 of the European Parliament and of the Council (2), personal protective equipment that is in conformity with harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, is to be presumed to be in conformity with the essential health and safety requirements set out in Annex II to that Regulation covered by those standards or parts thereof. |
|
(2) |
By Commission Implementing Decision C(2020)7924 (3), the Commission made a request to the European Committee for Standardization (CEN) and the European Committee for Electrotechnical Standardization (CENELEC) to revise and to complete the work on harmonised standards in support of Regulation (EU) 2016/425 to ensure that they continue to reflect the generally acknowledged state of the art in order to meet the essential health and safety requirements set out in Annex II to that Regulation. |
|
(3) |
Implementing Decision C(2020)7924 has been amended by Commission Implementing Decision C(2024)2750 (4), in order to adapt the scope of the request by adding and removing certain standards to take into account the latest technical and scientific progress, as well as the latest developments of standardisation activities at international and European levels, and to extend the deadline of standardisation activities in relation to certain standards and draft standards as the work on some of them could not be completed by the deadlines set out in Implementing Decision C(2020) 7924. |
|
(4) |
On the basis of the request set out in Implementing Decision C(2020)7924, CEN drafted the following new harmonised standards in support of Regulation (EU) 2016/425: EN ISO 10256-1:2024 on protective equipment for use in ice hockey (general requirements), EN ISO 10256-2:2024 on head protectors for skaters, EN ISO 10256-3:2024 on face and eye protectors for skaters, EN ISO 10256-4:2024 on head and face protectors for goalkeepers, EN 17961:2025 on load sharing devices for mountaineering and EN 18100:2025 on helmets for ski mountaineers. |
|
(5) |
On the basis of the request set out in Implementing Decision C(2020)7924, CEN revised the following harmonised standards, the references to which are published in the Official Journal of the European Union by Commission Implementing Decision (EU) 2023/941 (5): EN 397:2012+A1:2012 on industrial safety helmets, EN 420:2003+A1:2009 on protective gloves, EN ISO 12312-1:2013 and EN ISO 12312-1:2013/A1:2015 on sunglasses for general use, EN 12492:2012 on helmets for mountaineers and EN 17353:2020 on enhanced visibility equipment. |
|
(6) |
As a result, CEN adopted the following standards and the amendments thereto: EN 397:2025 and EN 397:2025/AC:2025, EN ISO 12312-1:2022 and EN ISO 12312-1:2022/A11:2024, EN 12492:2025, EN 17353:2020+A1:2025, EN ISO 21420:2020 and EN ISO 21420:2020/A1:2024. |
|
(7) |
The Commission, together with CEN, has assessed whether EN 397:2025, EN 397:2025/AC:2025, EN ISO 10256-1:2024, EN ISO 10256-2:2024, EN ISO 10256-3:2024, EN ISO 10256-4:2024, EN ISO 12312-1:2022, EN ISO 12312-1:2022/A11:2024, EN 12492:2025, EN 17353:2020+A1:2025, EN 17961:2025, EN 18100:2025, EN ISO 21420:2020, and EN ISO 21420:2020/A1:2024 comply with the request set out in Implementing Decision C(2020)7924. |
|
(8) |
The following harmonised standards and the amendments thereto satisfy the essential health and safety requirements which they aim to cover and which are set out in Annex II to Regulation (EU) 2016/425: EN 397:2025/AC:2025, EN ISO 10256-1:2024, EN ISO 10256-2:2024, EN ISO 10256-3:2024, EN ISO 10256-4:2024, EN ISO 12312-1:2022, EN ISO 12312-1:2022/A11:2024, EN 12492:2025, EN 17353:2020+A1:2025, EN 17961:2025, EN 18100:2025, EN ISO 21420:2020, and EN ISO 21420:2020/A1:2024. It is therefore appropriate to publish the references of those harmonised standards and of the amendments thereto in the Official Journal of the European Union. |
|
(9) |
Having examined harmonised standard EN 397:2025, the Commission concluded that clause 4.2.7.5.2.5 of that standard referred to clause 5.13 instead of clause 5.13.5, and that the link between clause 4.2.7.4 of that standard and essential health and safety requirement 3.6.1 of Annex II to Regulation (EU) 2016/425 was missing. That harmonised standard should therefore be published in the Official Journal of the European Union with a restriction. |
|
(10) |
Implementing Decision (EU) 2023/941 has been amended several times. Since further amendments are to be made, that Implementing Decision should, in the interests of clarity, be replaced. |
|
(11) |
For reasons of clarity, all references to harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 should be listed in a single act. Annex I to this Decision therefore includes both the references newly published by this Decision as well as those previously published by Implementing Decision (EU) 2023/941. |
|
(12) |
It is necessary to withdraw the references to harmonised standards EN 397:2012+A1:2012, EN 420:2003+A1:2009, EN ISO 12312-1:2013, EN ISO 12312-1:2013/A1:2015, EN 12492:2012 and EN 17353:2020 from the Official Journal of the European Union, given that those standards have been revised. |
|
(13) |
To give manufacturers sufficient time to adapt their products to the revised standards, it is appropriate to provide for deferred dates of withdrawal for the references replaced by this Decision. Those dates of withdrawal should therefore be set out in Annex II to this Decision. |
|
(14) |
Additionally, for reason of clarity, it is also necessary to include in Annex II to this Decision, the references of standards for which Implementing Decision (EU) 2023/941 will continue to apply until the dates of their withdrawal as set out in that Annex. |
|
(15) |
Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the day of its publication, |
HAS ADOPTED THIS DECISION:
Article 1
The references to harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.
Article 2
Implementing Decision (EU) 2023/941 is repealed.
However, it shall continue to apply in respect of the references to harmonised standards listed in Annex II to this Decision until the dates of withdrawal of those references set out in that Annex.
Article 3
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
Done at Brussels, 12 June 2026.
For the Commission
The President
Ursula VON DER LEYEN
(1) OJ L 316, 14.11.2012, p. 12, ELI: http://data.europa.eu/eli/reg/2012/1025/oj.
(2) Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC ( OJ L 81, 31.3.2016, p. 51, ELI: http://data.europa.eu/eli/reg/2016/425/oj).
(3) Commission Implementing Decision C(2020)7924 of 19 November 2020 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards personal protective equipment in support of Regulation (EU) 2016/425 of the European Parliament and of the Council.
(4) Commission Implementing Decision C(2024)2750 of 29 April 2024 amending Implementing Decision C(2020)7924 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards personal protective equipment in support of Regulation (EU) 2016/425 of the European Parliament and of the Council.
(5) Commission Implementing Decision (EU) 2023/941 of 2 May 2023 on harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425 of the European Parliament and of the Council ( OJ L 125, 11.5.2023, p. 37, ELI: http://data.europa.eu/eli/dec_impl/2023/941/oj).
ANNEX I
|
No |
Reference of the standard |
|
1. |
EN 136:1998 Respiratory protective devices – Full face masks – Requirements, testing, marking EN 136:1998/AC:2003 |
|
2. |
EN 137:2006 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking |
|
3. |
EN 140:1998 Respiratory protective devices – Half masks and quarter masks – Requirements, testing, marking EN 140:1998/AC:1999 |
|
4. |
EN 142:2002 Respiratory protective devices – Mouthpiece assemblies – Requirements, testing, marking |
|
5. |
EN 143:2021 Respiratory protective devices – Particle filters – Requirements, testing, marking |
|
6. |
EN 144-1:2000 Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connector EN 144-1:2000/A1:2003 EN 144-1:2000/A2:2005 |
|
7. |
EN 144-2:1998 Respiratory protective devices – Gas cylinder valves – Part 2: Outlet connections |
|
8. |
EN 144-3:2003 Respiratory protective devices – Gas cylinder valves – Part 3: Outlet connections for diving gases Nitrox and oxygen EN 144-3:2003/AC:2003 |
|
9. |
EN 145:1997 Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, marking EN 145:1997/A1:2000 |
|
10. |
EN 148-1:1999 Respiratory protective devices – Threads for facepieces – Part 1: Standard thread connection |
|
11. |
EN 148-2:1999 Respiratory protective devices – Threads for facepieces – Part 2: Centre thread connection |
|
12. |
EN 148-3:1999 Respiratory protective devices – Threads for facepieces – Part 3: Tread connection M 45 x 3 |
|
13. |
EN 149:2001+A1:2009 Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking |
|
14. |
EN 207:2017 Personal eye-protection equipment – Filters and eye-protectors against laser radiation (laser eye-protectors) |
|
15. |
EN 208:2009 Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) |
|
16. |
EN 250:2014 Respiratory equipment – Open-circuit self-contained compressed air diving apparatus – Requirements, testing and marking |
|
17. |
EN 342:2017 Protective clothing – Ensembles and garments for protection against cold |
|
18. |
EN 343:2019 Protective clothing – Protection against rain |
|
19. |
EN 352-1:2020 Hearing protectors – General requirements – Part 1: Earmuffs Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. |
|
20. |
EN 352-2:2020+A1:2024 Hearing protectors – General requirements – Part 2: Earplugs Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. |
|
21. |
EN 352-3:2020 Hearing protectors – General requirements – Part 3: Earmuffs attached to head protection and/or face protection devices Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. |
|
22. |
EN 352-4:2020 Hearing protectors – Safety requirements – Part 4: Level-dependent earmuffs |
|
23. |
EN 352-5:2020 Hearing protectors – Safety requirements – Part 5: Active noise reduction earmuffs |
|
24. |
EN 352-6:2020+A1:2024 Hearing protectors – Safety requirements – Part 6: Earmuffs with safety-related audio input |
|
25. |
EN 352-7:2020 Hearing protectors – Safety requirements – Part 7: Level-dependent earplugs |
|
26. |
EN 352-8:2020+A1:2024 Hearing protectors – Safety requirements – Part 8: Entertainment audio earmuffs |
|
27. |
EN 352-9:2020+A1:2024 Hearing protectors – Safety requirements – Part 9: Earplugs with safety-related audio input |
|
28. |
EN 352-10:2020+A1:2024 Hearing protectors – Safety requirements – Part 10: Entertainment audio earplugs |
|
29. |
EN 353-1:2014+A1:2017 Personal fall protection equipment – Guided type fall arresters including an anchor line – Part 1: Guided type fall arresters including a rigid anchor line |
|
30. |
EN 353-2:2024 Personal fall protection equipment – Part 2: Guided type fall arresters including a flexible anchor line |
|
31. |
EN 354:2010 Personal fall protection equipment – Lanyards |
|
32. |
EN 355:2002 Personal protective equipment against falls from a height – Energy absorbers |
|
33. |
EN 358:2018 Personal protective equipment for work positioning and prevention of falls from a height – Belts and lanyards for work positioning or restraint |
|
34. |
EN 360:2023 Personal fall protection equipment – Retractable type fall arresters |
|
35. |
EN 361:2002 Personal protective equipment against falls from a height – Full body harnesses |
|
36. |
EN 362:2004 Personal protective equipment against falls from a height – Connectors |
|
37. |
EN 365:2004 Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging EN 365:2004/AC:2006 |
|
38. |
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) |
|
39. |
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016) |
|
40. |
EN 388:2016+A1:2018 Protective gloves against mechanical risks |
|
41. |
EN 397:2025 Industrial protective helmets EN 397:2025/AC:2025 Notice: In clause 4.2.7.5.2.5 of the standard, where it reads ‘5.13’, it shall read ‘5.13.5’ instead. Compliance with clause 4.2.7.4 of the standard provides presumption of conformity with essential health and safety requirement 3.6.1. |
|
42. |
EN 402:2003 Respiratory protective devices – Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape – Requirements, testing, marking |
|
43. |
EN 403:2004 Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking |
|
44. |
EN 404:2005 Respiratory protective devices for self-rescue – Filter self-rescuer from carbon monoxide with mouthpiece assembly |
|
45. |
EN 405:2001+A1:2009 Respiratory protective devices – Valved filtering half masks to protect against gases or gases and particles – Requirements, testing, marking |
|
46. |
EN 407:2004 Protective gloves against thermal risks (heat and/or fire) |
|
47. |
EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination |
|
48. |
EN 443:2008 Helmets for fire fighting in buildings and other structures |
|
49. |
EN 469:2020 Protective clothing for firefighters – Performance requirements for protective clothing for firefighting activities |
|
50. |
EN 510:2019 Specification for protective clothing for use where there is a risk of entanglement with moving parts |
|
51. |
EN 511:2006 Protective gloves against cold |
|
52. |
EN 564:2023 Mountaineering equipment – Accessory cord – Safety requirements and test methods |
|
53. |
EN 565:2017 Mountaineering equipment – Tape – Safety requirements and test methods |
|
54. |
EN 566:2017 Mountaineering equipment – Slings – Safety requirements and test methods |
|
55. |
EN 567:2013 Mountaineering equipment – Rope clamps – Safety requirements and test methods |
|
56. |
EN 568:2015 Mountaineering equipment – Ice anchors – Safety requirements and test methods |
|
57. |
EN 569:2007 Mountaineering equipment – Pitons – Safety requirements and test methods |
|
58. |
EN 659:2003+A1:2008 Protective gloves for firefighters EN 659:2003+A1:2008/AC:2009 |
|
59. |
EN 795:2012 Personal fall protection equipment – Anchor devices Warning: This publication does not concern the equipment described in: — type A (anchor devices with one or more stationary anchor points and with the need for structural anchors or fixing elements to fix to the structure) referred to in clauses 3.2.1, 4.4.1, 5.3; — type C (anchor devices employing horizontal flexible anchor lines) referred to in clauses 3.2.3, 4.4.3 and 5.5; — type D (anchor devices employing horizontal rigid anchor lines) referred to in clauses 3.2.4, 4.4.4 and 5.6; — any combination of the above. In respect of types A, C and D, this publication does not concern either clauses: 4.5, 5.2.2, 6, 7; Annex A or Annex ZA. Accordingly, in respect of the equipment mentioned above, there shall be no presumption of conformity with the provisions of Regulation (EU) 2016/425 because they are not considered to be PPE. |
|
60. |
EN 812:2012 Industrial bump caps |
|
61. |
EN 813:2024 Personal fall protection equipment – Sit harnesses |
|
62. |
EN 892:2012+A3:2023 Mountaineering equipment – Dynamic mountaineering ropes – Safety requirements and test methods |
|
63. |
EN 893:2019 Mountaineering equipment – Crampons – Safety requirements and test methods |
|
64. |
EN 943-1:2015+A1:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
|
65. |
EN 943-2:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET) |
|
66. |
EN 958:2024 Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods |
|
67. |
EN 966:2012+A1:2012 Helmets for airborne sports |
|
68. |
EN 1073-1:2016+A1:2018 Protective clothing against solid airborne particles including radioactive contamination – Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract |
|
69. |
EN 1073-2:2002 Protective clothing against radioactive contamination – Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination |
|
70. |
EN 1077:2007 Helmets for alpine skiers and snowboarders |
|
71. |
EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates |
|
72. |
EN 1080:2013 Impact protection helmets for young children |
|
73. |
EN 1082-1:1996 Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 1: Chain mail gloves and arm guards |
|
74. |
EN 1082-2:2000 Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 2: Gloves and arm guards made of material other than chain mail |
|
75. |
EN 1146:2005 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape – Requirements, testing, marking |
|
76. |
EN 1149-5:2018 Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements |
|
77. |
EN 1384:2023 Helmets for equestrian activities |
|
78. |
EN 1385:2012 Helmets for canoeing and white water sports |
|
79. |
EN 1486:2007 Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting |
|
80. |
EN 1497:2007 Personal fall protection equipment – Rescue harnesses |
|
81. |
EN 1827:1999+A1:2009 Respiratory protective devices – Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only – Requirements, testing, marking |
|
82. |
EN 1891:1998 Personal protective equipment for the prevention of falls from a height – Low stretch kernmantel ropes |
|
83. |
EN 1938:2010 Personal eye protection – Goggles for motorcycle and moped users |
|
84. |
EN ISO 10256-1:2024 Protective equipment for use in ice hockey - Part 1: General requirements (ISO 10256-1:2024) |
|
85. |
EN ISO 10256-2:2024 Protective equipment for use in ice hockey - Part 2: Head protectors for skaters (ISO 10256-2:2024) |
|
86. |
EN ISO 10256-3:2024 Protective equipment for use in ice hockey - Part 3: Face and eye protectors for skaters (ISO 10256-3:2024) |
|
87. |
EN ISO 10256-4:2024 Protective equipment for use in ice hockey - Part 4: Head and face protectors for goalkeepers (ISO 10256-4:2024) |
|
88. |
EN ISO 10819:2013 Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) EN ISO 10819:2013/A1:2019 EN ISO 10819:2013/A2:2022 |
|
89. |
EN ISO 10862:2009 Small craft – Quick release system for trapeze harness (ISO 10862:2009) |
|
90. |
EN ISO 11393-2:2019 Protective clothing for users of hand-held chainsaws – Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018) |
|
91. |
EN ISO 11393-4:2019 Protective clothing for users of hand-held chainsaws – Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018) |
|
92. |
EN ISO 11393-5:2019 Protective clothing for users of hand-held chainsaws – Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018) |
|
93. |
EN ISO 11393-6:2019 Protective clothing for users of hand-held chainsaws – Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018) |
|
94. |
EN 12021:2014 Respiratory equipment – Compressed gases for breathing apparatus |
|
95. |
EN 12083:1998 Respiratory protective devices – Filters with breathing hoses, (Non-mask mounted filters) – Particle filters, gas filters, and combined filters – Requirements, testing, marking EN 12083:1998/AC:2000 |
|
96. |
EN 12270:2013 Mountaineering equipment – Chocks – Safety requirements and test methods |
|
97. |
EN 12275:2013 Mountaineering equipment – Connectors – Safety requirements and test methods |
|
98. |
EN 12276:2013 Mountaineering equipment – Frictional anchors – Safety requirements and test methods |
|
99. |
EN 12277:2015+A1:2018 Mountaineering equipment – Harnesses – Safety requirements and test methods |
|
100. |
EN 12278:2007 Mountaineering equipment – Pulleys – Safety requirements and test methods |
|
101. |
EN ISO 12312-1:2022 Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022) EN ISO 12312-1:2022/A11:2024 |
|
102. |
EN ISO 12312-2:2015 Eye and face protection – Sunglasses and related eyewear – Part 2: Filters for direct observation of the sun (ISO 12312-2:2015) |
|
103. |
EN ISO 12401:2009 Small craft – Deck safety harness and safety line – Safety requirements and test methods (ISO 12401:2009) |
|
104. |
EN ISO 12402-2:2020 Personal flotation devices – Part 2: Lifejackets, performance level 275 – Safety requirements (ISO 12402-2:2020) Notice: Application of clause 5.6 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425. |
|
105. |
EN ISO 12402-3:2020 Personal flotation devices – Part 3: Lifejackets, performance level 150 – Safety requirements (ISO 12402-3:2020) Notice: Application of clause 5.6 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425. |
|
106. |
EN ISO 12402-4:2020 Personal flotation devices – Part 4: Lifejackets, performance level 100 – Safety requirements (ISO 12402-4:2020) Notice: Application of clause 5.6 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425. Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425. |
|
107. |
EN ISO 12402-5:2020 Personal flotation devices – Part 5: Buoyancy aids (level 50) – Safety requirements (ISO 12402-5:2020) |
|
108. |
EN ISO 12402-6:2020 Personal flotation devices – Part 6: Special application lifejackets and buoyancy aids – Safety requirements and additional test methods (ISO 12402-6:2020) |
|
109. |
EN ISO 12402-8:2020 Personal flotation devices – Part 8: Accessories – Safety requirements and test methods (ISO 12402-8:2020) |
|
110. |
EN 12477:2001 Protective gloves for welders EN 12477:2001/A1:2005 |
|
111. |
EN 12492:2025 Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods |
|
112. |
EN 12841:2024 Personal fall protection equipment – Rope access systems – Rope adjustment devices |
|
113. |
EN 12941:2023 Respiratory protective devices – Powered filtering devices incorporating a loose fitting respiratory interface – Requirements, testing, marking |
|
114. |
EN 12942:2023 Respiratory protective devices – Powered filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking |
|
115. |
EN 13034:2005+A1:2009 Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) |
|
116. |
EN 13061:2009 Protective clothing – Shin guards for association football players – Requirements and test methods |
|
117. |
EN 13089:2011+A3:2023 Mountaineering equipment – Ice-tools – Safety requirements and test methods |
|
118. |
EN 13138-1:2021 Buoyant aids for swimming instruction – Part 1: Safety requirements and test methods for buoyant aids to be worn EN 13138-1:2021/AC:2022 |
|
119. |
EN 13158:2018 Protective clothing – Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers – Requirements and test methods |
|
120. |
EN 13178:2000 Personal eye-protection – Eye protectors for snowmobile users |
|
121. |
EN 13277-1:2000 Protective equipment for martial arts – Part 1: General requirements and test methods |
|
122. |
EN 13277-2:2000 Protective equipment for martial arts – Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors |
|
123. |
EN 13277-3:2013 Protective equipment for martial arts – Part 3: Additional requirements and test methods for trunk protectors |
|
124. |
EN 13277-4:2001 Protective equipment for martial arts – Part 4: Additional requirements and test methods for head protectors EN 13277-4:2001/A1:2007 |
|
125. |
EN 13277-5:2002 Protective equipment for martial arts – Part 5: Additional requirements and test methods for genital protectors and abdominal protectors |
|
126. |
EN 13277-6:2003 Protective equipment for martial arts – Part 6: Additional requirements and test methods for breast protectors for females |
|
127. |
EN 13277-7:2009 Protective equipment for martial arts – Part 7: Additional requirements and test methods for hand and foot protectors |
|
128. |
EN 13277-8:2017 Protective equipment for martial arts – Part 8: Additional requirements and test methods for karate face protectors |
|
129. |
EN 13484:2012 Helmets for users of luges |
|
130. |
EN 13546:2002+A1:2007 Protective clothing – Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players – Requirements and test methods |
|
131. |
EN 13567:2002+A1:2007 Protective clothing – Hand, arm, chest, abdomen, leg, genital and face protectors for fencers – Requirements and test methods |
|
132. |
EN 13594:2015 Protective gloves for motorcycle riders – Requirements and test methods |
|
133. |
EN 13634:2017 Protective footwear for motorcycle riders – Requirements and test methods |
|
134. |
EN ISO 13688:2013 Protective clothing – General requirements (ISO 13688:2013) EN ISO 13688:2013/A1:2021 |
|
135. |
EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
|
136. |
EN 13794:2002 Respiratory protective devices – Self-contained closed-circuit breathing apparatus for escape – Requirements, testing, marking |
|
137. |
EN 13832-2:2018 Footwear protecting against chemicals – Part 2: Requirements for limited contact with chemicals |
|
138. |
EN 13832-3:2018 Footwear protecting against chemicals – Part 3: Requirements for prolonged contact with chemicals |
|
139. |
EN 13949:2003 Respiratory equipment – Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen – Requirements, testing, marking |
|
140. |
EN ISO 13982-1:2004 Protective clothing for use against solid particulates – Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004) EN ISO 13982-1:2004/A1:2010 |
|
141. |
EN ISO 13998:2003 Protective clothing – Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
|
142. |
EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods |
|
143. |
EN 14052:2012+A1:2012 High performance industrial helmets |
|
144. |
EN 14058:2017+A1:2023 Protective clothing – Garments for protection against cool environments |
|
145. |
EN 14120:2003+A1:2007 Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods |
|
146. |
EN 14126:2003 Protective clothing – Performance requirements and tests methods for protective clothing against infective agents EN 14126:2003/AC:2004 |
|
147. |
EN 14143:2013 Respiratory equipment – Self-contained re-breathing diving apparatus |
|
148. |
EN 14225-1:2017 Diving suits – Part 1: Wet suits – Requirements and test methods |
|
149. |
EN 14225-2:2017 Diving suits – Part 2: Dry suits – Requirements and test methods |
|
150. |
EN 14225-3:2017 Diving suits – Part 3: Actively heated or cooled suit systems and components – Requirements and test methods |
|
151. |
EN 14328:2005 Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods |
|
152. |
EN 14387:2004+A1:2008 Respiratory protective devices – Gas filter(s) and combined filter(s) – Requirements, testing, marking |
|
153. |
EN 14404-2:2024 Personal protective equipment – Knee protectors for work in the kneeling position – Part 2: Requirements for wearable knee protectors (type 1) |
|
154. |
EN 14404-3:2024 Personal protective equipment – Knee protectors for work in the kneeling position – Part 3: Requirements for the individual combination of knee pads and garments (type 2) Notice: In addition to clauses 5.5.1.1, 5.5.1.2, 5.5.5.1 and 5.5.5.2, compliance with clause 5.5.1.3 is also necessary to confer presumption of conformity with essential requirement in point 1.3.1. of Annex II to Regulation (EU) 2016/425 |
|
155. |
EN 14404-4:2024 Personal protective equipment – Knee protectors for work in the kneeling position – Part 4: Requirements for the combination of interoperable knee pads and garments (type 2) |
|
156. |
EN 14404-6:2024 Personal protective equipment – Knee protectors for work in the kneeling position – Part 6: Requirements for kneeling systems (type 4) |
|
157. |
EN 14435:2004 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only – Requirements, testing, marking |
|
158. |
EN 14458:2018 Personal eye-equipment – High performance visors intended only for use with protective helmets |
|
159. |
EN ISO 14460:1999 Protective clothing for automobile racing drivers – Protection against heat and flame – Performance requirements and test methods (ISO 14460:1999) EN ISO 14460:1999/AC:1999 EN ISO 14460:1999/A1:2002 |
|
160. |
EN 14529:2005 Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
|
161. |
EN 14593-1:2005 Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 1: Apparatus with a full face mask – Requirements, testing, marking |
|
162. |
EN 14594:2018 Respiratory protective devices – Continuous flow compressed air line breathing devices – Requirements, testing and marking |
|
163. |
EN 14605:2005+A1:2009 Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
|
164. |
EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002) |
|
165. |
EN ISO 15027-1:2012 Immersion suits – Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
|
166. |
EN ISO 15027-2:2012 Immersion suits – Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
|
167. |
EN 15090:2012 Footwear for firefighters |
|
168. |
EN 15151-1:2012 Mountaineering equipment – Braking devices – Part 1: Braking devices with manually assisted locking, safety requirements and test methods |
|
169. |
EN 15333-1:2008 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 1: Demand apparatus EN 15333-1:2008/AC:2009 |
|
170. |
EN 15333-2:2009 Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 2: Free flow apparatus |
|
171. |
EN 15613:2008 Knee and elbow protectors for indoor sports – Safety requirements and test methods |
|
172. |
EN 16027:2011 Protective clothing – Gloves with protective effect for association football goal keepers |
|
173. |
EN ISO 16321-1:2022 Eye and face protection for occupational use – Part 1: General requirements (ISO 16321-1:2021) |
|
174. |
EN ISO 16321-2:2021 Eye and face protection for occupational use – Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021) Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead. |
|
175. |
EN ISO 16321-3:2022 Eye and face protection for occupational use – Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021) Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead. |
|
176. |
EN 16350:2014 Protective gloves – Electrostatic properties |
|
177. |
EN 16473:2014 Firefighters helmets – Helmets for technical rescue |
|
178. |
EN 16716:2017 Mountaineering equipment – Avalanche airbag systems – Safety requirements and test methods |
|
179. |
EN 17092-2:2020 Protective garments for motorcycle riders – Part 2: Class AAA garments – Requirements |
|
180. |
EN 17092-3:2020 Protective garments for motorcycle riders – Part 3: Class AA garments – Requirements |
|
181. |
EN 17092-4:2020 Protective garments for motorcycle riders – Part 4: Class A garments – Requirements |
|
182. |
EN 17092-5:2020 Protective garments for motorcycle riders – Part 5: Class B garments – Requirements |
|
183. |
EN 17092-6:2020 Protective garments for motorcycle riders – Part 6: Class C garments – Requirements |
|
184. |
EN 17109:2020+A1:2024 Mountaineering equipment – Individual safety systems for rope courses – Safety requirements and test methods |
|
185. |
EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting (ISO 17249:2013) EN ISO 17249:2013/AC:2014 |
|
186. |
EN 17353:2020+A1:2025 Protective clothing - Enhanced visibility equipment for medium risk situations - Test methods and requirements |
|
187. |
EN 17487:2024 Protective clothing – Garments with permethrin as-treated articles supporting the protection against tick bites |
|
188. |
EN 17520:2021 Mountaineering equipment – Personal belay lanyards – Safety requirements and test methods |
|
189. |
EN 17961:2025 Mountaineering equipment - Load sharing devices - Safety requirements and test methods |
|
190. |
EN 18100:2025 Mountaineering equipment - Helmets for ski mountaineers - Safety requirements and test methods |
|
191. |
EN ISO 18527-1:2022 Eye and face protection for sports use – Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021) |
|
192. |
EN ISO 18527-2:2021 Eye and face protection for sports use – Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021) |
|
193. |
EN ISO 20320:2020 Protective clothing for use in Snowboarding – Wrist Protectors – Requirements and test methods (ISO 20320:2020) |
|
194. |
EN ISO 20345:2022 Personal protective equipment – Safety footwear (ISO 20345:2021) EN ISO 20345:2022/A1:2024 |
|
195. |
EN ISO 20346:2022 Personal protective equipment – Protective footwear (ISO 20346:2021) EN ISO 20346:2022/A1:2024 |
|
196. |
EN ISO 20347:2022 Personal protective equipment – Occupational footwear (ISO 20347:2021) EN ISO 20347:2022/A1:2024 |
|
197. |
EN ISO 20349-1:2017 Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017) EN ISO 20349-1:2017/A1:2020 |
|
198. |
EN ISO 20349-2:2017 Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017) EN ISO 20349-2:2017/A1:2020 |
|
199. |
EN ISO 20471:2013 High visibility clothing – Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01) EN ISO 20471:2013/A1:2016 |
|
200. |
EN ISO 21420:2020 Protective gloves - General requirements and test methods - Amendment 1 (ISO 21420:2020/Amd 1:2022) EN ISO 21420:2020/A1:2024 |
|
201. |
EN ISO 27065:2017 Protective clothing – Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017) EN ISO 27065:2017/A1:2019 |
|
202. |
EN 50321-1:2018 Live working – Footwear for electrical protection – Insulating footwear and overboots EN 50321-1:2018/AC:2018-08 |
|
203. |
EN 50365:2023 Live Working – Electrically insulating helmets for use on low and medium voltage installations EN 50365:2023/AC:2024-09 |
|
204. |
EN 61482-2:2020 Live working – Protective clothing against the thermal hazards of an electric arc – Part 2: Requirements (IEC 61482-2:2018, Modified) |
ANNEX II
|
No |
Reference of the standard |
Date of withdrawal |
|
1. |
EN 352-2:2020 Hearing protectors – General requirements – Part 2: Earplugs Notice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425. |
16.11.2026 |
|
2. |
EN 352-6:2020 Hearing protectors – Safety requirements – Part 6: Earmuffs with safety-related audio input |
14.08.2026 |
|
3. |
EN 352-8:2020 Hearing protectors – Safety requirements – Part 8: Entertainment audio earmuffs |
14.08.2026 |
|
4. |
EN 352-9:2020 Hearing protectors – Safety requirements – Part 9: Earplugs with safety-related audio input |
14.08.2026 |
|
5. |
EN 352-10:2020 Hearing protectors – Safety requirements – Part 10: Entertainment audio earplugs |
14.08.2026 |
|
6. |
EN 353-2:2002 Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line |
16.11.2026 |
|
7. |
EN 397:2012+A1:2012 Industrial safety helmets |
16.12.2027 |
|
8. |
EN 420:2003+A1:2009 Protective gloves – General requirements and test methods |
16.12.2027 |
|
9. |
EN 813:2008 Personal fall protection equipment – Sit harnesses |
14.08.2026 |
|
10. |
EN 958:2017 Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods |
16.11.2026 |
|
11. |
EN ISO 12312-1:2013 Eye and face protection – Sunglasses and related eyewear – Part 1: Sunglasses for general use (ISO 12312-1:2013) EN ISO 12312-1:2013/A1:2015 |
16.12.2027 |
|
12. |
EN 12492:2012 Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods |
16.12.2027 |
|
13. |
EN 12941:1998 Respiratory protective devices – Powered filtering devices incorporating a helmet or a hood – Requirements, testing, marking EN 12941:1998/A1:2003 EN 12941:1998/A2:2008 |
08.10.2026 |
|
14. |
EN 12942:1998 Respiratory protective devices – Power assisted filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking EN 12942:1998/A1:2002 EN 12942:1998/A2:2008 |
08.10.2026 |
|
15. |
EN 17109:2020 Mountaineering equipment – Individual safety systems for rope courses – Safety requirements and test methods |
16.11.2026 |
|
16. |
EN 17353:2020 Protective clothing – Enhanced visibility equipment for medium risk situations – Test methods and requirements |
16.12.2027 |
ELI: http://data.europa.eu/eli/dec_impl/2026/1279/oj
ISSN 1977-0677 (electronic edition)