THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC (1), and in particular Article 22 thereof,

Whereas:

(1)

In accordance with Regulation (EU) No 305/2011, Technical Assessment Bodies are to use methods and criteria provided in European Assessment Documents, the references of which have been published in the Official Journal of the European Union, for assessing performance of construction products covered by those documents in relation to their essential characteristics.

(2)	In accordance with Article 19 of Regulation (EU) No 305/2011, following several requests by manufacturers for European Technical Assessments, the organisation of Technical Assessment Bodies has drawn up and adopted 20 European Assessment Documents.

(3)

The European Assessment Documents that have been drawn up and adopted by the organisation of Technical Assessment Bodies relate to the following construction products:

—	membranes for use as roof or wall underlays or both;

—	humidity-dependent vapour control layers;

—	flexible polymer modified mineral thick coatings;

—	thermal insulation for buildings made of straw bales;

—	factory-made bonded foam to be used as acoustic and thermal insulation;

—	insulating boards made of recycled polyurethane to be used as acoustic and thermal insulation;

—	kit of polyurethane elements for thermal insulation frame around windows made of unplasticized polyvinyl chloride profiles;

—	sootfire resistant chimney kits with clay/ceramic flue liner, working under wet conditions and negative/positive pressure (superseding technical specifications ‘060001-00-0802, 060003-00-0802 and 060008-00-0802’);

—	strength graded and finger jointed structural boards with closed finger base – softwood;

—	prefabricated wood slab of milled softwood timber to be used as structural elements in buildings;

—	underlays made of granulated polyurethane-foam with or without granulated cork;

—	steel spring elements;

—	wood based composite panels for indoor wall or ceiling design or both;

—	kits for green roofs;

—	road markings – retro-reflective elements;

—	glass panels, tiles and mosaic;

—	cast-in anchors with internal threaded socket (superseding technical specification ‘EAD 330012-00-0601’);

—	glass fibre-reinforced plastic connectors for use in sandwich and element walls made of concrete;

—	anchor devices for fastening personal fall protection systems to timber substructures;

—	bonded screw fasteners for use in concrete.

(4)

The European Assessment Documents that have been drawn up and adopted by the organisation of Technical Assessment Bodies satisfy the demands to be met in relation to the basic requirements for construction works set out in Annex I to Regulation (EU) No 305/2011. It is therefore appropriate to publish the references to those European Assessment Documents in the Official Journal of the European Union.

(5)	The list of references to European Assessment Documents for construction products is published pursuant to Commission Implementing Decision (EU) 2019/450 (2). For reasons of clarity, references to new European Assessment Documents should be added to that list.

(6)	Implementing Decision (EU) 2019/450 should therefore be amended accordingly.

(7)	In order to enable the use of the European Assessment Documents as early as possible, this Decision should enter into force on the day of its publication,

HAS ADOPTED THIS DECISION:

(2) Commission Implementing Decision (EU) 2019/450 of 19 March 2019 on publication of the European Assessment Documents (EADs) for construction products drafted in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council (OJ L 77, 20.3.2019, p. 78).

‘030218-01-0402	Membranes for use as roof or wall underlays or both’
‘030271-00-0605	Humidity-dependent vapour control layers’
‘030295-00-0605	Flexible polymer modified mineral thick coatings’
‘040146-00-1201	Thermal insulation for buildings made of straw bales’
‘040831-00-1201	Factory-made bonded foam to be used as acoustic and thermal insulation’
‘041369-00-1201	Insulating boards made of recycled polyurethane to be used as acoustic and thermal insulation’
‘041499-00-1201	Kit of polyurethane elements for thermal insulation frame around windows made of unplasticized polyvinyl chloride profiles’
‘060011-00-0802	Sootfire resistant chimney kits with clay/ceramic flue liner, working under wet conditions and negative/positive pressure (superseding technical specifications ‘060001-00-0802, 060003-00-0802 and 060008-00-0802’)’
‘130321-00-0304	Strength graded and finger jointed structural boards with closed finger base – softwood’
‘130323-00-0304	Prefabricated wood slab of milled softwood timber to be used as structural elements in buildings’
‘190010-00-0502	Underlays made of granulated polyurethane-foam with or without granulated cork’
‘200112-00-0301	Steel spring elements’
‘210058-00-0504	Wood based composite panels for indoor wall or ceiling design or both’
‘220009-00-0401	Kits for green roofs’
‘230064-00-0106	Road markings – retro-reflective elements’
‘300002-00-1202	Glass panels, tiles and mosaic’
‘330012-01-0601	Cast-in anchors with internal threaded socket (superseding technical specification ‘EAD 330012-00-0601’)’
‘330387-00-0601	Glass fibre-reinforced plastic connectors for use in sandwich and element walls made of concrete’
‘331846-00-0603	Anchor devices for fastening personal fall protection systems to timber substructures’
‘332795-00-0601	Bonded screw fasteners for use in concrete’.