12.7.2012 |
EN |
Official Journal of the European Union |
L 180/4 |
COMMISSION REGULATION (EU) No 622/2012
of 11 July 2012
amending Regulation (EC) No 641/2009 with regard to ecodesign requirements for glandless standalone circulators and glandless circulators integrated in products
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products (1), and in particular Article 15(1) thereof,
After consulting the Ecodesign Consultation Forum,
Whereas:
(1) |
Article 7 of Regulation (EC) No 641/2009 of 22 July 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for glandless standalone circulators and glandless circulators integrated in products (2) requires the Commission to review the methodology for calculating the energy efficiency index, set out in Annex II, point 2, to that Regulation, for glandless circulators integrated in products before 1 January 2012. |
(2) |
The review carried out by the Commission as well as experience gained with the implementation of Regulation (EC) No 641/2009 revealed the necessity to amend certain provisions of Regulation (EC) No 641/2009 in order to avoid unintended impacts on the circulator markets and on the performance of the products covered by that Regulation. |
(3) |
The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 19(1) of Directive 2009/125/EC, |
HAS ADOPTED THIS REGULATION:
Article 1
Amendments to Regulation (EC) No 641/2009
Regulation (EC) No 641/2009 is amended as follows:
(1) |
Articles 1 and 2 are replaced by the following: ‘Article 1 Subject matter and scope 1. This Regulation establishes ecodesign requirements for the placing on the market of glandless standalone circulators and glandless circulators integrated in products. 2. This Regulation shall not apply to:
Article 2 Definitions For the purposes of this Regulation, the following definitions shall apply:
|
(2) |
Article 7 is replaced by the following: ‘Article 7 Revision The Commission shall review this Regulation before 1 January 2017, in the light of technological progress. The review shall include the assessment of design options that can facilitate reuse and recycling. The results of the review shall be presented to the Ecodesign Consultation Forum.’; |
(3) |
Annexes I and II to Regulation (EC) No 641/2009 are amended in accordance with the Annex to this Regulation. |
Article 2
Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 11 July 2012.
For the Commission
The President
José Manuel BARROSO
ANNEX
Amendments to Annexes I and II to Regulation (EC) No 641/2009
Annexes I and II to Regulation (EC) No 641/2009 are amended as follows:
(1) |
Annex I, point 2, is replaced by the following: ‘2. PRODUCT INFORMATION REQUIREMENTS
|
(2) |
Annex II, point 2, is replaced by the following: ‘2. METHODOLOGY FOR CALCULATING THE ENERGY EFFICIENCY INDEX The methodology for calculating the energy efficiency index (EEI) for circulators is as follows:
(*1) CXX % means a scaling factor that ensures that at the time of defining the scaling factor only XX % of circulators of a certain type have an EEI ≤ 0,20.’." |
(*1) CXX % means a scaling factor that ensures that at the time of defining the scaling factor only XX % of circulators of a certain type have an EEI ≤ 0,20.’.”