27.6.2012   

EN

Official Journal of the European Union

L 166/7

COUNCIL REGULATION (EU) No 552/2012

of 21 June 2012

amending Regulation (EU) No 1344/2011 suspending the autonomous Common Customs Tariff duties on certain agricultural, fishery and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)

It is in the interest of the Union to suspend totally the autonomous Common Customs Tariff duties on a certain number of products currently not listed in the Annex to Council Regulation (EU) No 1344/2011 (1).

(2)

Six products with TARIC codes 2914390020, 2918300050, 3206110020, 3815120020, 3815120030 and 8302420080, which are currently listed in the Annex to Regulation (EU) No 1344/2011 should be deleted because it is no longer in the interest of the Union to maintain the suspension of autonomous Common Customs Tariff duties for those products.

(3)

It is necessary to modify the product description of the product with CN code 2819 10 00 and the products with TARIC codes 2914199040, 2914700050, 2922498510, 3815199010, 3919900051, 3920102891, 3920510030, 3920910093, 8529909250 and 9401908010 in the Annex to Regulation (EU) No 1344/2011 in order to take account of technical product developments and economic trends on the market. Moreover, the existing TARIC codes 2009419270, 2009897992 and 8505199031 should be changed. In addition, for the product with TARIC code 3904400091 double classification is considered necessary.

(4)

Those suspensions, for which technical modifications are necessary should be deleted from the list of suspensions in the Annex to Regulation (EU) No 1344/2011 and should be reinserted in that list with new product descriptions, or new CN or TARIC codes.

(5)

In view of their temporary nature, the suspensions listed in Annex I should be reviewed systematically, at the latest five years after their application or renewal. Moreover, closure of certain suspensions should be warranted at any time, as a result of a proposal of the Commission on the basis of a review carried out on initiative of the Commission or on request of one or more Member States if the suspensions are no longer in the Union’s interest to be maintained or due to technical product developments, to changed circumstances or to economic trends on the market.

(6)

Since the suspensions laid down in this Regulation should take effect from 1 July 2012, this Regulation should apply from that date and should enter into force immediately upon its publication in the Official Journal of the European Union.

(7)

Regulation (EU) No 1344/2011 should therefore be amended accordingly,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1344/2011 is amended as follows:

(1)

the rows for the products listed in Annex I to this Regulation are inserted;

(2)

the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2

This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.

It shall apply from 1 July 2012.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Luxembourg, 21 June 2012.

For the Council

The President

M. FREDERIKSEN

(1)   OJ L 349, 31.12.2011, p. 1.

ANNEX I

Products referred to in point (1) of Article 1

CN code

TARIC

Description

Rate of autonomous duty

Date foreseen for mandatory review

ex 2009 41 92

20

Pineapple juice:

8  %

31.12.2015

ex 2009 41 99

70

—

not from concentrate,

—

of the genus Ananas,

—

of a Brix value of 11 or more but not more than 16,

used in the manufacture of products of drink industry (1)

ex 2009 89 79

20

Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packing of a content of 50 litres or more

0  %

31.12.2016

ex 2811 19 80

20

Hydrogen iodide (CAS RN 10034-85-2)

0  %

31.12.2016

2819 10 00

 

Chromium trioxide (CAS RN 1333-82-0)

0  %

31.12.2016

ex 2819 90 90

10

Dichromium trioxide for use in metallurgy (CAS RN 1308-38-9) (1)

0  %

31.12.2016

ex 2826 90 80

15

Lithium hexafluorophosphate (CAS RN 21324-40-3)

0  %

31.12.2016

ex 2850 00 20

40

Germanium tetrahydride (CAS RN 7782-65-2)

0  %

31.12.2016

ex 2903 39 90

15

Perfluoro(4-methyl-2-pentene), (CAS RN 84650-68-0)

0  %

31.12.2016

ex 2903 89 90

40

Hexabromocyclododecane

0  %

31.12.2016

ex 2907 29 00

40

2,3,5-Trimethylhydroquinone (CAS RN 700-13-0)

0  %

31.12.2016

ex 2907 29 00

45

2-Methylhydroquinone (CAS RN 95-71-6)

0  %

31.12.2016

ex 2909 20 00

10

8-Methoxycedrane (CAS RN 19870-74-7)

0  %

31.12.2016

ex 2909 30 38

20

1,1’-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene], (CAS RN 21850-44-2)

0  %

31.12.2016

ex 2910 90 00

80

Allyl glycidyl ether (CAS RN 106-92-3)

0  %

31.12.2016

ex 2914 19 90

40

Pentan-2-one (CAS RN 107-87-9)

0  %

31.12.2012

ex 2914 29 00

50

trans-β-Damascone (CAS RN 23726-91-2)

0  %

31.12.2016

ex 2914 50 00

40

4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)

0  %

31.12.2016

ex 2914 69 90

40

p-Benzoquinone (CAS RN 106-51-4)

0  %

31.12.2016

ex 2914 70 00

50

3’-Chloropropiophenone (CAS RN 34841-35-5)

0  %

31.12.2013

ex 2916 12 00

50

2-Hydroxyethyl acrylate with a purity by weight of 97 % or more (CAS RN 818-61-1)

0  %

31.12.2016

ex 2916 31 00

10

Benzyl benzoate (CAS RN 120-51-4)

0  %

31.12.2016

ex 2918 99 90

80

Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate, (CAS RN 62476-59-9)

0  %

31.12.2016

ex 2919 90 00

50

Triethyl phosphate (CAS RN 78-40-0)

0  %

31.12.2016

ex 2922 49 85

10

Ornithine aspartate (INNM), (CAS RN 3230-94-2)

0  %

31.12.2013

ex 2924 29 98

63

N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0)

0  %

31.12.2016

ex 2928 00 90

30

N-Isopropylhydroxylamine (CAS RN 5080-22-8)

0  %

31.12.2016

ex 2930 90 99

13

Mercaptamine hydrochloride (CAS RN 156-57-0)

0  %

31.12.2016

ex 2930 90 99

18

1-Methyl-5-[3-methyl-4-[4-[(trifluoromethyl)thio]phenoxy]phenyl]biuret, (CAS RN 106310-17-2)

0  %

31.12.2016

ex 2931 90 90

18

Trioctylphosphine oxide (CAS RN 78-50-2)

0  %

31.12.2016

ex 2932 99 00

20

Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1)

0  %

31.12.2016

ex 2933 29 90

70

Cyazofamid (ISO), (CAS RN 120116-88-3)

0  %

31.12.2016

ex 2933 39 99

70

2,3-Dichloro-5-trifluoromethylpyridine, (CAS RN 69045-84-7)

0  %

31.12.2016

ex 2933 39 99

72

5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one, (CAS RN 120014-30-4)

0  %

31.12.2016

ex 2933 59 95

72

Triacetylganciclovir (CAS RN 86357-14-4)

0  %

31.12.2016

ex 2933 69 80

72

Diethylhexyl butamido triazone (INCI), (CAS RN 154702-15-5)

0  %

31.12.2016

ex 2933 99 80

67

Candesartan ethyl ester (INNM), (CAS RN 139481-58-6)

0  %

31.12.2016

ex 2934 99 90

43

Clopidogrel acid hydrochloride (CAS RN 144750-42-5)

0  %

31.12.2016

ex 2934 99 90

48

Propan-2-ol - 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate, (CAS RN 864743-41-9)

0  %

31.12.2016

ex 2935 00 90

48

(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid - 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1), (CAS RN 1235588-99-4)

0  %

31.12.2016

ex 3204 12 00

10

Dye C.I. Acid Blue 9

0  %

31.12.2016

ex 3204 17 00

15

Dye C.I. Pigment Green 7

0  %

31.12.2016

ex 3204 17 00

20

Dye C.I. Pigment Blue 15:3

0  %

31.12.2016

ex 3204 17 00

25

Dye C.I. Pigment Yellow 14

0  %

31.12.2016

ex 3204 17 00

35

Dye C.I. Pigment Red 202

0  %

31.12.2016

ex 3204 17 00

45

Dye C.I. Pigment Violet 27

0  %

31.12.2016

ex 3204 20 00

20

Dye C.I. Fluorescent Brightener 71

0  %

31.12.2016

ex 3204 20 00

30

Dye C.I. Fluorescent Brightener 351

0  %

31.12.2016

ex 3205 00 00

20

Dye C.I. Carbon Black 7 Lake

0  %

31.12.2016

ex 3206 19 00

10

Preparation containing by weight:

—

72 % (± 2 %) of mica and

—

28 % (± 2 %) of titanium dioxide

0  %

31.12.2016

ex 3801 90 00

10

Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6)

0  %

31.12.2016

ex 3812 30 80

55

UV stabilizer, containing:

—

2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) and

—

either N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or

—

N,N’-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)

0  %

31.12.2016

ex 3812 30 80

60

Light stabiliser, consisting of branched and linear alkyl esters of 3-(2H-Benzotriazolyl)-5-(1,1-di-methylethyl)-4-hydroxy-benzenepropanoic acid (CAS RN 127519-17-9)

0  %

31.12.2016

ex 3812 30 80

65

Stabiliser for plastic material containing:

—

2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),

—

2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and

—

2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)

0  %

31.12.2016

ex 3812 30 80

70

Light stabiliser containing:

—

branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and

—

1-methoxy-2-propyl acetate (CAS RN 108-65-6)

0  %

31.12.2016

ex 3815 19 90

10

Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)

0  %

31.12.2016

ex 3815 19 90

87

Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) (1)

0  %

31.12.2016

ex 8506 90 00

10

ex 3817 00 80

30

Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms

0  %

31.12.2016

ex 3824 90 97

26

Aqueous dispersion, containing by weight:

—

76 % (± 0,5 %) of silicon carbide (CAS RN 409-21-2)

—

4,6 % (± 0,05 %) of aluminium oxide (CAS RN 1344-28-1) and

—

2,4 % (± 0,05 %) of yttrium oxide (CAS RN 1314-36-9)

0  %

31.12.2016

ex 3824 90 97

31

Mixture containing by weight:

—

70 % or more but not more than 80 % of bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7) and

—

20 % or more but not more than 30 % of methyl-1,2,2,6,6-pentamethyl-4-piperidyl sebacate (CAS RN 82919-37-7)

0  %

31.12.2016

ex 3824 90 97

32

Mixture of:

—

basic zirconium carbonate (CAS RN 57219-64-4) and

—

cerium carbonate (CAS RN 537-01-9)

0  %

31.12.2016

ex 3824 90 97

33

Preparation, containing:

—

trioctylphosphine oxide (CAS RN 78-50-2),

—

dioctylhexylphosphine oxide (CAS RN 31160-66-4),

—

octyldihexylphosphine oxide (CAS RN 31160-64-2) and

—

trihexylphosphine oxide (CAS RN 597-50-2)

0  %

31.12.2016

ex 3903 90 90

60

Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4 500 , in flake or powder form

0  %

31.12.2016

ex 3911 90 99

60

ex 3904 30 00

30

Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:

0  %

31.12.2013

ex 3904 40 00

91

—

87 % or more but not more than 92 % of vinyl chloride,

—

2 % or more but not more than 9 % of vinyl acetate and

—

1 % or more but not more than 8 % of vinyl alcohol,

in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1)

ex 3907 20 11

50

[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-hydroxypoly(oxo-1,2-ethanediyl) (CAS RN 104810-48-2)

0  %

31.12.2016

ex 3907 20 11

60

Preparation containing:

—

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and

—

α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1)

0  %

31.12.2016

ex 3912 20 11

10

Nitrocellulose

0  %

31.12.2016

ex 3919 10 80

80

Acrylic tape put up in rolls:

0  %

31.12.2016

ex 3919 90 00

83

—

self-adhesive on both sides,

—

of a total thickness of 0,04 mm or more, but not more than 1,25 mm,

—

of a total width of 5 mm or more but not more than 1 205  mm

for use in the manufacture of products of headings 8521 and 8528  (1)

ex 3919 90 00

51

Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet

0  %

31.12.2013

ex 3919 90 00

85

Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and copper:

—

having a minimum reflectance of 93,5 % as determined by ASTM G173-03,

—

covered on one side with a removable layer of polyethylene,

—

covered on the other side with an acrylic pressure sensitive adhesive and a siliconised polyester liner

0  %

31.12.2016

ex 3919 90 00

87

Self adhesive transparent film, having a transmittance of more than 90 % and a haze of less than 3 % (as determined by ASTM D1003), consisting of several layers including:

—

an acrylic adhesive layer with a thickness of 20 μm or more but not more than 70 μm,

—

a polyurethane based layer with a thickness of 100 μm or more but not more than 300 μm

0  %

31.12.2016

ex 3920 10 28

91

Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:

—

is repetitive and equally spaced along the length of the film

—

is equally and visibly aligned when viewed from the back or front of the film

0  %

31.12.2013

ex 3920 20 21

40

Sheets of biaxially — oriented polypropylene film:

—

with the thickness of not more than 0,1 mm,

—

printed on both sides with specialised coatings to allow banknote security printing

0  %

31.12.2016

ex 3920 20 29

50

Sheet of polypropylene in the form of a roll:

0  %

31.12.2016

ex 8507 90 30

95

—

with a thickness of not more than 30 μm,

—

of a width of not more than 210 mm,

—

conforming to ASTM D882,

for use in the manufacture of separators for lithium-ion electric vehicle batteries (1)

ex 3920 51 00

30

Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm

0  %

31.12.2013

ex 3920 91 00

93

Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:

—

a visible light transmission of 50 % or more,

—

coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),

—

a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm

for use in the manufacture of heat-reflecting or decorative laminated glass (1)

0  %

31.12.2013

ex 3921 90 90

10

Roll of polymer-metal laminate comprising:

0  %

31.12.2016

ex 8507 90 80

50

—

a layer of poly(ethylene terephthalate),

—

a layer of aluminium,

—

a layer of polypropylene,

—

with a width of not more than 275 mm,

—

a total thickness of not more than 165 μm, and

—

conforming to ASTM D1701-91 and ASTM D882-95A

for use in the manufacture of lithium-ion electric vehicle batteries (1)

ex 3923 10 00

10

Photomask compacts:

—

consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

—

having non porous, abrasion resistant or impact resistant surface properties,

—

fitted with a specially designed retainer system that protects the photomask from surface or cosmetic damage and

—

with or without a gasket seal,

of a kind used in the photolithography production to house photomasks

0  %

31.12.2016

ex 3926 90 97

80

Parts of car radio front panels

—

of acrylonitrile-butadiene-styrene with or without polycarbonate,

—

coated with a copper, a nickel and a chrome layers,

—

with a total thickness of coating of 5,54 μm or more but not more than 22,3 μm

0  %

31.12.2016

ex 7318 14 99

20

Rock bolt:

0  %

31.12.2016

ex 7318 14 99

29

—

being a self-tapping screw,

—

with a length of more than 300 mm,

of a kind used for support of mines

ex 7326 90 98

40

TV pedestal stand with metal upper part for fixation and stabilization of TV cabinet case/body

0  %

31.12.2016

ex 8529 90 49

10

ex 8529 90 92

60

ex 7410 11 00

10

Roll of laminate foil of graphite and copper, with:

0  %

31.12.2016

ex 8507 90 80

60

—

a width of 610 mm or more but not more than 620 mm, and

ex 8545 90 90

30

—

a diameter of 690 mm or more but not more than 710 mm,

for use in the manufacture of lithium-ion electric vehicle batteries (1)

ex 7410 22 00

10

Cut plate of nickel-plated copper foil, with:

0  %

31.12.2016

ex 8507 90 80

70

—

a width of 70 mm (± 5 mm),

—

a thickness of 0,4 mm (± 0,2 mm),

—

a length of not more than 55 mm,

for use in the manufacture of lithium-ion electric vehicle batteries (1)

ex 7607 11 90

40

Aluminium foil in rolls:

—

having a purity of 99,99 % by weight,

—

of a thickness of 0,021 mm or more but not more than 0,2 mm,

—

with a width of 500 mm,

—

with a surface oxide layer by 3 to 4 nm thick,

—

and with a cubic texture of more than 95 %

0  %

31.12.2016

ex 7607 19 90

10

Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:

0  %

31.12.2016

ex 8507 90 80

80

—

a width of 595 mm or more but not more than 605 mm, and

—

a diameter of 690 mm or more but not more than 710 mm,

for use in the manufacture of cathodes for lithium-ion electric vehicle batteries (1)

ex 7616 99 90

70

Connecting components for use in the production of helicopter tail rotor shafts (1)

0  %

31.12.2016

ex 8482 80 00

10

ex 8803 30 00

40

ex 8108 90 30

40

Wire of an titanium alloy containing by weight

—

22 % (± 3 %) of vanadium and

—

4 % (± 0,5 %) of aluminium

0  %

31.12.2016

ex 8108 90 50

70

Strip of an alloy of titanium, containing by weight

—

15 % (± 1 %) of vanadium

—

3 % (± 0,5 %) of chromium

—

3 % (± 0,5 %) of tin and

—

3 % (± 0,5 %) of aluminium

0  %

31.12.2016

ex 8108 90 50

75

Plates, sheets, strips and foil of titanium alloy, containing by weight:

—

0,3 % or more but not more than 0,7 % of aluminium and

—

0,25 % or more but not more than 0,6 % of silicon

0  %

31.12.2016

ex 8108 90 50

80

Plates, sheets, strips and foil of cold rolled titanium alloy, containing by weight not more than:

—

0,25 % of iron,

—

0,20 % of oxygen,

—

0,08 % of carbon,

—

0,03 % of nitrogen and

—

0,013 % of hydrogen

0  %

31.12.2016

ex 8108 90 90

20

Parts of spectacle frames and mountings, including bolts of the kind used for spectacle frames and mountings, of an alloy of titanium

0  %

31.12.2016

ex 9003 90 00

10

ex 8113 00 20

10

Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide

0  %

31.12.2016

ex 8409 91 00

10

Exhaust manifold complying with standard DIN EN 13835, whether or not with turbine housing, with four inlet ports, for use in the manufacture of exhaust manifold that is turned, milled, drilled and/or processed by other means (1)

0  %

31.12.2016

ex 8409 99 00

20

 

 

 

ex 8414 59 80

40

Cross-flow fan, with;

0  %

31.12.2016

ex 8414 90 00

60

—

a height of 575 mm (± 1,0 mm) or more, but not more than 850 mm (± 1,0 mm),

—

a diameter of 95 mm (± 0,6 mm) or 102 mm (± 0,6 mm),

—

an anti-static, anti-bacterial and heat-resistant, 30 % glass fibre reinforced plastic raw material that has a minimum temperature resistance of 70 °C (± 5 °C),

for use in the manufacture of indoor units of split-type air conditioning machines (1)

ex 8501 31 00

60

Brushless DC motor that can revolve counter clockwise (CCW), with:

—

an input voltage of 264 V or more, but not more than 391 V,

—

an external diameter of 81 mm (± 2,5 mm) or more, but not more than 150 mm (± 0,8 mm),

—

an output power of not more than 125 W,

—

E or B class winding insulation,

for use in the manufacture of indoor or outdoor units of split-type air conditioning machines (1)

0  %

31.12.2016

ex 8504 40 82

40

Printed circuit board equipped with a bridge rectifier circuit and other active and passive components

—

with two output connectors

—

with two input connectors which are available and useablein parallel

—

able to switch between bright and dimmed operation mode

—

with an input voltage of 40 V (+ 25 % –15 %) or 42 V (+ 25 % –15 %) in bright operation mode, with an input voltage of 30 V (± 4 V) in dimmed operation mode, or

—

with an input voltage of 230 V (+ 20 % –15 %) in bright operation mode, with an input voltage of 160 V (± 15 %) in dimmed operation mode, or

—

with an input voltage of 120 V (15 % –35 %) in bright operation mode, with an input voltage of 60 V (± 20 %) in dimmed operation mode

—

with an input current reaching 80 % of its nominal value within 20 ms

—

with an input frequency of 45 Hz or more, but not more than 65 Hz for 42 V and 230 V, and 45-70 Hz for 120 V versions

—

with an maximum inrush current overshoot of not more than 250 % of the input current

—

with a period of the inrush current overshoot of not more than 100ms

—

with an input current undershoot of not less than 50 % of the input current

—

with a period of the inrush current undershoot of not more than 20ms

—

with a presettable output current

—

with an output current reaching 90 % of its nominal pre-set value within 50 ms

—

with an output current reaching zero within 30 ms after removal of the input voltage

—

with an defined failure status in case of no-load or too-high load (end-of-life function)

0  %

31.12.2012

ex 8505 11 00

31

Permanent magnet having a remanence of 455 mT (± 15 mT)

0  %

31.12.2013

ex 8505 11 00

40

Neodymium-ferro ring with an external diameter of not more than 13 mm, an internal diameter of not more than 9 mm

0  %

31.12.2013

ex 8507 60 00

65

Cylindrical Lithium Ion Cell with

—

3,5 VDC to 3,8 VDC,

—

300 mAh to 900 mAh and

—

a diameter of 10,0 mm to 14,5 mm

0  %

31.12.2016

ex 8507 60 00

75

Rectangular lithium-ion-accumulator, with

—

a metal casing,

—

a length of 173 mm (± 0,15 mm),

—

a width of 21 mm (± 0,1 mm),

—

a height of 91 mm (± 0,15 mm),

—

a nominal voltage of 3,3 V and,

—

a nominal capacity of 21 Ah or more

0  %

31.12.2016

ex 8529 90 92

50

Colour LCD display panel for LCD monitors of heading 8528 :

—

with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

—

with background lighting, micro-controller,

—

with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface,

—

in a housing with or without a heat sink at the back of the housing,

—

without a signal-processing module,

for use in the manufacture of vehicles of chapter 87 (1)

0  %

31.12.2015

ex 8708 80 99

10

Piston rod for shock-absorbers used in vehicle suspension systems with:

—

a diameter at its widest point of 12,4 mm or more, but not more than 28 mm,

—

a length of 236,5 mm or more, but not more than 563,5 mm

0  %

31.12.2016

ex 8803 30 00

50

Pre-formed helicopter rotor shafts

—

of circular cross-section,

—

with a length of 1 249,68  mm or more, but not more than 1 496,06  mm,

—

of an external diameter of 81,356 mm or more, but not more than 82,2198 mm,

—

swaged on both ends to an external diameter of 63,8683 mm or more, but not more than 66,802 mm,

—

heat treated according to standards MIL-H-6088, AMS 2770 or AMS 2772

0  %

31.12.2016

ex 9001 10 90

30

Polymer optical fibre with:

—

a poly(methyl methacrylate) core,

—

a cladding of fluorinated polymer,

—

a diameter of not more than 3,0 mm, and

—

a length of more than 150 m,

of a kind used in the manufacture of polymer fibre cables

0  %

31.12.2016

ex 9401 90 80

10

Ratchet disk of a kind used in the manufacture of reclining car seats

0  %

31.12.2015

(1)  Suspension of duties is subject to Articles 291 to 300 of Commission Regulation (EEC) No 2454/93 (OJ L 253 11.10.1993, p. 1).

ANNEX II

Products referred to in point (2) of Article 1

CN code

TARIC

2009 41 92

70

2009 41 99

70

2009 89 79

92

2819 10 00

 

2914 19 90

40

2914 39 00

20

2914 70 00

50

2918 30 00

50

2922 49 85

10

3206 11 00

20

3815 19 90

10

3815 12 00

20

3815 12 00

30

3904 40 00

91

3919 90 00

51

3920 10 28

91

3920 51 00

30

3920 91 00

93

8302 42 00

80

8505 19 90

31

8529 90 92

50

9401 90 80

10