(1)

Commission Regulation (EC) No 2032/2003 of 4 November 2003 on the second phase of the 10-year work programme referred to in Article 16(2) of Directive 98/8/EC of the European Parliament and of the Council concerning the placing of biocidal products on the market, and amending Regulation (EC) No 1896/2000 (2) establishes a list of active substances to be assessed, with a view to their possible inclusion in Annex I, IA or IB to Directive 98/8/EC. That list includes dichlofluanid.

(2)

Pursuant to Regulation (EC) No 2032/2003, dichlofluanid has been evaluated in accordance with Article 11(2) of Directive 98/8/EC for use in product-type 8, wood preservatives, as defined in Annex V to Directive 98/8/EC.

(3)

In accordance with Article 5(2) of Regulation (EC) No 2032/2003, the United Kingdom was designated as Rapporteur Member State. The United Kingdom submitted the competent authority report, together with a recommendation, to the Commission on 13 September 2005 in accordance with Article 10(5) and (7) of that Regulation.

(4)

The competent authority report has been reviewed by the Member States and the Commission. In accordance with Article 11(4) of Regulation (EC) No 2032/2003, the findings of the review were incorporated, within the Standing Committee on Biocidal Products on 28 November 2006, in an assessment report.

(5)

The review of dichlofluanid did not reveal any open questions or concerns to be addressed by the Scientific Committee on Health and Environmental Risks (SCHER).

(6)

It appears from the various examinations made that biocidal products used as wood preservatives and containing dichlofluanid may be expected to satisfy the requirements laid down in Article 5 of Directive 98/8/EC, in particular with regard to the uses which were examined and detailed in the assessment report. It is therefore appropriate to include dichlofluanid in Annex I to Directive 98/8/EC, in order to ensure that in all Member States authorisations for biocidal products used as wood preservatives and containing dichlofluanid can be granted, modified, or cancelled in accordance with Article 16(3) of Directive 98/8/EC.

(7)

It is important that the provisions of this Directive should be applied simultaneously in all the Member States in order to ensure equal treatment of biocidal products on the market containing the active substance dichlofluanid and also to facilitate the proper operation of the biocidal products market in general.

(8)

In the light of the findings of the assessment report, it is appropriate to require that products authorised for industrial use must be used with appropriate personal protective equipment and that instructions are provided to indicate that treated timber must be stored after treatment on impermeable hard standing to prevent direct losses to soil and allow losses to be collected for re-use or disposal, in accordance with Article 10(2)(i)(d) of Directive 98/8/EC.

(9)

A reasonable period should be allowed to elapse before an active substance is included in Annex I to Directive 98/8/EC in order to permit Member States and the interested parties to prepare themselves to meet the new requirements entailed and to ensure that applicants who have prepared dossiers can benefit fully from the 10-year period of data protection, which, in accordance with Article 12(1)(c)(ii) of Directive 98/8/EC, starts from the date of inclusion.

(10)

After inclusion, Member States should be allowed a reasonable period to implement Article 16(3) of Directive 98/8/EC, and in particular, to grant, modify or cancel authorisations of biocidal products in product-type 8 containing dichlofluanid to ensure that they comply with Directive 98/8/EC.

(11)

Directive 98/8/EC should therefore be amended accordingly.

(12)

The measures provided for in this Directive are in accordance with the opinion of the Standing Committee on Biocidal Products,