This document is an excerpt from the EUR-Lex website
Document 52014XC0411(03)
Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Publication of titles and references of harmonised standards under Union harmonisation legislation) Text with EEA relevance
Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Publication of titles and references of harmonised standards under Union harmonisation legislation) Text with EEA relevance
Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Publication of titles and references of harmonised standards under Union harmonisation legislation) Text with EEA relevance
OJ C 110, 11.4.2014, p. 4–76
(BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
11.4.2014 |
EN |
Official Journal of the European Union |
C 110/4 |
Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
(Text with EEA relevance)
2014/C 110/02
ESO (1) |
Reference and title of the harmonised standard (and reference document) |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard Note 1 |
(1) |
(2) |
(3) |
(4) |
(5) |
Standards developed by CEN |
||||
A-type standards A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a full presumption of conformity. |
||||
CEN |
EN ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction (ISO 12100:2010) |
8.4.2011 |
EN ISO 12100-1:2003 EN ISO 12100-2:2003 EN ISO 14121-1:2007 Note 2.1 |
Date expired (30.11.2013) |
B-type standards B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards. |
||||
CEN |
EN 349:1993+A1:2008 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
8.9.2009 |
|
|
CEN |
EN 547-1:1996+A1:2008 Safety of machinery — Human body measurements — Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
8.9.2009 |
|
|
CEN |
EN 547-2:1996+A1:2008 Safety of machinery — Human body measurements — Part 2: Principles for determining the dimensions required for access openings |
8.9.2009 |
|
|
CEN |
EN 547-3:1996+A1:2008 Safety of machinery — Human body measurements — Part 3: Anthropometric data |
8.9.2009 |
|
|
CEN |
EN 574:1996+A1:2008 Safety of machinery — Two-hand control devices — Functional aspects — Principles for design |
8.9.2009 |
|
|
CEN |
EN 614-1:2006+A1:2009 Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles |
8.9.2009 |
|
|
CEN |
EN 614-2:2000+A1:2008 Safety of machinery — Ergonomic design principles — Part 2: Interactions between the design of machinery and work tasks |
8.9.2009 |
|
|
CEN |
EN 626-1:1994+A1:2008 Safety of machinery — Reduction of risks to health from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers |
8.9.2009 |
|
|
CEN |
EN 626-2:1996+A1:2008 Safety of machinery — Reduction of risk to health from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures |
8.9.2009 |
|
|
CEN |
EN 842:1996+A1:2008 Safety of machinery — Visual danger signals — General requirements, design and testing |
8.9.2009 |
|
|
CEN |
EN 894-1:1997+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 1: General principles for human interactions with displays and control actuators |
8.9.2009 |
|
|
CEN |
EN 894-2:1997+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 2: Displays |
8.9.2009 |
|
|
CEN |
EN 894-3:2000+A1:2008 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 3: Control actuators |
8.9.2009 |
|
|
CEN |
EN 894-4:2010 Safety of machinery — Ergonomics requirements for the design of displays and control actuators — Part 4: Location and arrangement of displays and control actuators |
20.10.2010 |
|
|
CEN |
EN 953:1997+A1:2009 Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards |
8.9.2009 |
|
|
CEN |
EN 981:1996+A1:2008 Safety of machinery — System of auditory and visual danger and information signals |
8.9.2009 |
|
|
CEN |
EN 1005-1:2001+A1:2008 Safety of machinery — Human physical performance — Part 1: Terms and definitions |
8.9.2009 |
|
|
CEN |
EN 1005-2:2003+A1:2008 Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and component parts of machinery |
8.9.2009 |
|
|
CEN |
EN 1005-3:2002+A1:2008 Safety of machinery — Human physical performance — Part 3: Recommended force limits for machinery operation |
8.9.2009 |
|
|
CEN |
EN 1005-4:2005+A1:2008 Safety of machinery — Human physical performance — Part 4: Evaluation of working postures and movements in relation to machinery |
8.9.2009 |
|
|
CEN |
EN 1032:2003+A1:2008 Mechanical vibration — Testing of mobile machinery in order to determine the vibration emission value |
8.9.2009 |
|
|
CEN |
EN 1037:1995+A1:2008 Safety of machinery — Prevention of unexpected start-up |
8.9.2009 |
|
|
CEN |
EN 1093-1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods |
8.9.2009 |
|
|
CEN |
EN 1093-2:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant |
8.9.2009 |
|
|
CEN |
EN 1093-3:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
8.9.2009 |
|
|
CEN |
EN 1093-4:1996+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 4: Capture efficiency of an exhaust system — Tracer method |
8.9.2009 |
|
|
CEN |
EN 1093-6:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 6: Separation efficiency by mass, unducted outlet |
8.9.2009 |
|
|
CEN |
EN 1093-7:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 7: Separation efficiency by mass, ducted outlet |
8.9.2009 |
|
|
CEN |
EN 1093-8:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Pollutant concentration parameter, test bench method |
8.9.2009 |
|
|
CEN |
EN 1093-9:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 9: Pollutant concentration parameter, room method |
8.9.2009 |
|
|
CEN |
EN 1093-11:2001+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 11: Decontamination index |
8.9.2009 |
|
|
CEN |
EN 1127-1:2011 Explosive atmospheres — Explosion prevention and protection — Part 1: Basic concepts and methodology |
18.11.2011 |
EN 1127-1:2007 Note 2.1 |
31.7.2014 |
CEN |
EN 1299:1997+A1:2008 Mechanical vibration and shock — Vibration isolation of machines — Information for the application of source isolation |
8.9.2009 |
|
|
CEN |
EN 1837:1999+A1:2009 Safety of machinery — Integral lighting of machines |
18.12.2009 |
|
|
CEN |
EN ISO 3741:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for reverberation test rooms (ISO 3741:2010) |
8.4.2011 |
EN ISO 3741:2009 Note 2.1 |
Date expired (30.4.2011) |
CEN |
EN ISO 3743-1:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for small movable sources in reverberant fields — Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
8.4.2011 |
EN ISO 3743-1:2009 Note 2.1 |
Date expired (30.4.2011) |
CEN |
EN ISO 3743-2:2009 Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
18.12.2009 |
|
|
CEN |
EN ISO 3744:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
8.4.2011 |
EN ISO 3744:2009 Note 2.1 |
Date expired (30.4.2011) |
CEN |
EN ISO 3745:2012 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012) |
5.6.2012 |
EN ISO 3745:2009 Note 2.1 |
Date expired (30.9.2012) |
CEN |
EN ISO 3746:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
8.4.2011 |
EN ISO 3746:2009 Note 2.1 |
Date expired (30.6.2011) |
CEN |
EN ISO 3747:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
8.4.2011 |
EN ISO 3747:2009 Note 2.1 |
Date expired (30.6.2011) |
CEN |
EN ISO 4413:2010 Hydraulic fluid power — General rules and safety requirements for systems and their components (ISO 4413:2010) |
8.4.2011 |
EN 982:1996+A1:2008 Note 2.1 |
Date expired (30.11.2011) |
CEN |
EN ISO 4414:2010 Pneumatic fluid power — General rules and safety requirements for systems and their components (ISO 4414:2010) |
8.4.2011 |
EN 983:1996+A1:2008 Note 2.1 |
Date expired (30.11.2011) |
CEN |
EN ISO 4871:2009 Acoustics — Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
18.12.2009 |
|
|
CEN |
EN ISO 5136:2009 Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method (ISO 5136:2003) |
18.12.2009 |
|
|
CEN |
EN ISO 7235:2009 Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
18.12.2009 |
|
|
CEN |
EN ISO 7731:2008 Ergonomics — Danger signals for public and work areas — Auditory danger signals (ISO 7731:2003) |
8.9.2009 |
|
|
CEN |
EN ISO 9614-1:2009 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points (ISO 9614-1:1993) |
18.12.2009 |
|
|
CEN |
EN ISO 9614-3:2009 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
18.12.2009 |
|
|
CEN |
EN ISO 11145:2008 Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols (ISO 11145:2006) |
8.9.2009 |
|
|
CEN |
EN ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements (ISO 11161:2007) |
26.5.2010 |
|
|
EN ISO 11161:2007/A1:2010 |
26.5.2010 |
Note 3 |
Date expired (30.9.2010) |
|
CEN |
EN ISO 11200:2009 Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997) |
18.12.2009 |
|
|
CEN |
EN ISO 11201:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
20.10.2010 |
EN ISO 11201:2009 Note 2.1 |
Date expired (30.11.2010) |
CEN |
EN ISO 11202:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
20.10.2010 |
EN ISO 11202:2009 Note 2.1 |
Date expired (30.11.2010) |
CEN |
EN ISO 11203:2009 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
18.12.2009 |
|
|
CEN |
EN ISO 11204:2010 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
20.10.2010 |
EN ISO 11204:2009 Note 2.1 |
Date expired (30.11.2010) |
CEN |
EN ISO 11205:2009 Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
18.12.2009 |
|
|
CEN |
EN ISO 11546-1:2009 Acoustics — Determination of sound insulation performances of enclosures — Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
18.12.2009 |
|
|
CEN |
EN ISO 11546-2:2009 Acoustics — Determination of sound insulation performances of enclosures — Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
18.12.2009 |
|
|
CEN |
EN ISO 11554:2008 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006) |
8.9.2009 |
|
|
CEN |
EN ISO 11688-1:2009 Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning (ISO/TR 11688-1:1995) |
18.12.2009 |
|
|
CEN |
EN ISO 11691:2009 Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method (ISO 11691:1995) |
18.12.2009 |
|
|
CEN |
EN ISO 11957:2009 Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements (ISO 11957:1996) |
18.12.2009 |
|
|
CEN |
EN 12198-1:2000+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 1: General principles |
8.9.2009 |
|
|
CEN |
EN 12198-2:2002+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 2: Radiation emission measurement procedure |
8.9.2009 |
|
|
CEN |
EN 12198-3:2002+A1:2008 Safety of machinery — Assessment and reduction of risks arising from radiation emitted by machinery — Part 3: Reduction of radiation by attenuation or screening |
8.9.2009 |
|
|
CEN |
EN 12254:2010 Screens for laser working places — Safety requirements and testing |
26.5.2010 |
EN 12254:1998+A2:2008 Note 2.1 |
Date expired (30.9.2010) |
EN 12254:2010/AC:2011 |
|
|
|
|
CEN |
EN 12786:2013 Safety of machinery — Requirements for the drafting of the vibration clauses of safety standards |
28.11.2013 |
|
|
CEN |
EN 13478:2001+A1:2008 Safety of machinery — Fire prevention and protection |
8.9.2009 |
|
|
CEN |
EN 13490:2001+A1:2008 Mechanical vibration — Industrial trucks — Laboratory evaluation and specification of operator seat vibration |
8.9.2009 |
|
|
CEN |
EN ISO 13732-1:2008 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces (ISO 13732-1:2006) |
8.9.2009 |
|
|
CEN |
EN ISO 13732-3:2008 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces (ISO 13732-3:2005) |
8.9.2009 |
|
|
CEN |
EN ISO 13753:2008 Mechanical vibration and shock — Hand-arm vibration — Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) |
8.9.2009 |
|
|
CEN |
EN ISO 13849-1:2008 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1:2006) |
8.9.2009 |
EN ISO 13849-1:2006 EN 954-1:1996 Note 2.1 |
Date expired (31.12.2011) |
EN ISO 13849-1:2008/AC:2009 |
|
|
|
|
CEN |
EN ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation (ISO 13849-2:2012) |
5.4.2013 |
EN ISO 13849-2:2008 Note 2.1 |
Date expired (30.4.2013) |
CEN |
EN ISO 13850:2008 Safety of machinery — Emergency stop — Principles for design (ISO 13850:2006) |
8.9.2009 |
|
|
CEN |
EN ISO 13855:2010 Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
20.10.2010 |
EN 999:1998+A1:2008 Note 2.1 |
Date expired (30.11.2010) |
CEN |
EN ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
28.11.2013 |
EN 1760-1:1997+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
CEN |
EN ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) |
28.11.2013 |
EN 1760-2:2001+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
CEN |
EN ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) |
28.11.2013 |
EN 1760-3:2004+A1:2009 Note 2.1 |
Date expired (31.1.2014) |
CEN |
EN ISO 13857:2008 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
8.9.2009 |
|
|
CEN |
EN ISO 14119:2013 Safety of machinery — Interlocking devices associated with guards — Principles for design and selection (ISO 14119:2013) |
This is the first publication |
EN 1088:1995+A2:2008 Note 2.1 |
30.4.2015 |
CEN |
EN ISO 14122-1:2001 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001) |
20.10.2010 |
|
|
EN ISO 14122-1:2001/A1:2010 |
20.10.2010 |
Note 3 |
Date expired (31.10.2010) |
|
CEN |
EN ISO 14122-2:2001 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways (ISO 14122-2:2001) |
20.10.2010 |
|
|
EN ISO 14122-2:2001/A1:2010 |
20.10.2010 |
Note 3 |
Date expired (31.10.2010) |
|
CEN |
EN ISO 14122-3:2001 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001) |
20.10.2010 |
|
|
EN ISO 14122-3:2001/A1:2010 |
20.10.2010 |
Note 3 |
Date expired (31.10.2010) |
|
CEN |
EN ISO 14122-4:2004 Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders (ISO 14122-4:2004) |
8.4.2011 |
|
|
EN ISO 14122-4:2004/A1:2010 |
8.4.2011 |
Note 3 |
Date expired (8.4.2011) |
|
CEN |
EN ISO 14159:2008 Safety of machinery — Hygiene requirements for the design of machinery (ISO 14159:2002) |
8.9.2009 |
|
|
CEN |
EN ISO 14738:2008 Safety of machinery — Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) |
8.9.2009 |
|
|
CEN |
EN ISO 15536-1:2008 Ergonomics — Computer manikins and body templates — Part 1: General requirements (ISO 15536-1:2005) |
8.9.2009 |
|
|
CEN |
EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
18.11.2011 |
|
|
CEN |
EN ISO 16231-1:2013 Self-propelled agricultural machinery — Assessment of stability — Part 1: Principles (ISO 16231-1:2013) |
28.11.2013 |
|
|
CEN |
EN ISO 20643:2008 Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission (ISO 20643:2005) |
8.9.2009 |
|
|
EN ISO 20643:2008/A1:2012 |
15.11.2012 |
Note 3 |
Date expired (31.1.2013) |
|
CEN |
EN 30326-1:1994 Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements (ISO 10326-1:1992) |
8.9.2009 |
|
|
EN 30326-1:1994/A1:2007 |
8.9.2009 |
Note 3 |
Date expired (28.12.2009) |
|
EN 30326-1:1994/A2:2011 |
29.2.2012 |
Note 3 |
Date expired (30.6.2012) |
|
C-type standards C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer ¿s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard. |
||||
CEN |
EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts — Part 3: Electric and hydraulic service lifts |
8.9.2009 |
|
|
EN 81-3:2000+A1:2008/AC:2009 |
|
|
|
|
CEN |
EN 81-31:2010 Safety rules for the construction and installation of lifts — Lifts for the transport of goods only — Part 31: Accessible goods only lifts |
20.10.2010 |
|
|
CEN |
EN 81-40:2008 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
8.9.2009 |
|
|
CEN |
EN 81-41:2010 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
8.4.2011 |
|
|
CEN |
EN 81-43:2009 Safety rules for the construction and installation of lifts — Special lifts for the transport of persons and goods — Part 43: Lifts for cranes |
8.9.2009 |
|
|
CEN |
EN 115-1:2008+A1:2010 Safety of escalators and moving walks — Part 1: Construction and installation |
26.5.2010 |
EN 115-1:2008 Note 2.1 |
Date expired (30.9.2010) |
CEN |
EN 201:2009 Plastics and rubber machines — Injection moulding machines — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels |
18.11.2011 |
EN 267:2009 Note 2.1 |
Date expired (29.2.2012) |
CEN |
EN 280:2013 Mobile elevating work platforms — Design calculations — Stability criteria — Construction — Safety — Examinations and tests |
28.11.2013 |
EN 280:2001+A2:2009 Note 2.1 |
31.1.2015 |
CEN |
EN 289:2004+A1:2008 Plastics and rubber machines — Presses — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 303-5:2012 Heating boilers — Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW — Terminology, requirements, testing and marking |
24.8.2012 |
|
|
CEN |
EN 378-2:2008+A2:2012 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation |
24.8.2012 |
EN 378-2:2008+A1:2009 Note 2.1 |
Date expired (30.11.2012) |
CEN |
EN 415-1:2000+A1:2009 Packaging machines safety — Part 1: Terminology and classification of packaging machines and associated equipment |
8.9.2009 |
|
|
CEN |
EN 415-3:1999+A1:2009 Safety of packaging machines — Part 3: Form, fill and seal machines |
18.12.2009 |
|
|
CEN |
EN 415-5:2006+A1:2009 Safety of packaging machines — Part 5: Wrapping machines |
18.12.2009 |
|
|
CEN |
EN 415-6:2013 Safety of packaging machines — Part 6: Pallet wrapping machines |
28.11.2013 |
EN 415-6:2006+A1:2009 Note 2.1 |
Date expired (30.11.2013) |
CEN |
EN 415-7:2006+A1:2008 Safety of packaging machines — Part 7: Group and secondary packaging machines |
8.9.2009 |
|
|
CEN |
EN 415-8:2008 Safety of packaging machines — Part 8: Strapping machines |
8.9.2009 |
|
|
CEN |
EN 415-9:2009 Safety of packaging machines — Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
18.12.2009 |
|
|
CEN |
EN 422:2009 Plastics and rubber machines — Blow moulding machines — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 453:2000+A1:2009 Food processing machinery — Dough mixers — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 454:2000+A1:2009 Food processing machinery — Planetary mixers — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 474-1:2006+A4:2013 Earth-moving machinery — Safety — Part 1: General requirements |
28.11.2013 |
EN 474-1:2006+A3:2013 Note 2.1 |
|
CEN |
EN 474-2:2006+A1:2008 Earth-moving machinery — Safety — Part 2: Requirements for tractor-dozers |
8.9.2009 |
|
|
CEN |
EN 474-3:2006+A1:2009 Earth-moving machinery — Safety — Part 3: Requirements for loaders |
8.9.2009 |
|
|
CEN |
EN 474-4:2006+A2:2012 Earth-moving machinery — Safety — Part 4: Requirements for backhoe loaders |
23.3.2012 |
|
|
CEN |
EN 474-5:2006+A3:2013 Earth-moving machinery — Safety — Part 5: Requirements for hydraulic excavators |
28.11.2013 |
EN 474-5:2006+A1:2009+A2:2012 Note 2.1 |
Date expired (31.1.2014) |
CEN |
EN 474-6:2006+A1:2009 Earth-moving machinery — Safety — Part 6: Requirements for dumpers |
8.9.2009 |
|
|
CEN |
EN 474-7:2006+A1:2009 Earth-moving machinery — Safety — Part 7: Requirements for scrapers |
8.9.2009 |
|
|
CEN |
EN 474-8:2006+A1:2009 Earth-moving machinery — Safety — Part 8: Requirements for graders |
8.9.2009 |
|
|
CEN |
EN 474-9:2006+A1:2009 Earth-moving machinery — Safety — Part 9: Requirements for pipelayers |
8.9.2009 |
|
|
CEN |
EN 474-10:2006+A1:2009 Earth-moving machinery — Safety — Part 10: Requirements for trenchers |
8.9.2009 |
|
|
CEN |
EN 474-11:2006+A1:2008 Earth-moving machinery — Safety — Part 11: Requirements for earth and landfill compactors |
8.9.2009 |
|
|
CEN |
EN 474-12:2006+A1:2008 Earth-moving machinery — Safety — Part 12: Requirements for cable excavators |
8.9.2009 |
|
|
CEN |
EN 500-1:2006+A1:2009 Mobile road construction machinery — Safety — Part 1: Common requirements |
26.5.2010 |
|
|
CEN |
EN 500-2:2006+A1:2008 Mobile road construction machinery — Safety — Part 2: Specific requirements for road-milling machines |
8.9.2009 |
|
|
CEN |
EN 500-3:2006+A1:2008 Mobile road construction machinery — Safety — Part 3: Specific requirements for soil-stabilising machines and recycling machines |
8.9.2009 |
|
|
CEN |
EN 500-4:2011 Mobile road construction machinery — Safety — Part 4: Specific requirements for compaction machines |
20.7.2011 |
EN 500-4:2006+A1:2009 Note 2.1 |
Date expired (31.8.2011) |
CEN |
EN 500-6:2006+A1:2008 Mobile road construction machinery — Safety — Part 6: Specific requirements for paver-finishers |
8.9.2009 |
|
|
CEN |
EN 528:2008 Rail dependent storage and retrieval equipment — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 609-1:1999+A2:2009 Agricultural and forestry machinery — Safety of log splitters — Part 1: Wedge splitters |
18.12.2009 |
|
|
CEN |
EN 609-2:1999+A1:2009 Agricultural and forestry machinery — Safety of log splitters — Part 2: Screw splitters |
18.12.2009 |
|
|
CEN |
EN 617:2001+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
8.4.2011 |
|
|
CEN |
EN 618:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
8.4.2011 |
|
|
CEN |
EN 619:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads |
8.4.2011 |
|
|
CEN |
EN 620:2002+A1:2010 Continuous handling equipment and systems — Safety and EMC requirements for fixed belt conveyors for bulk materials |
8.4.2011 |
|
|
CEN |
EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels |
8.9.2009 |
|
|
EN 676:2003+A2:2008/AC:2008 |
|
|
|
|
CEN |
EN 692:2005+A1:2009 Machine tools — Mechanical presses — Safety |
8.9.2009 |
|
|
CEN |
EN 693:2001+A2:2011 Machine tools — Safety — Hydraulic presses |
18.11.2011 |
EN 693:2001+A1:2009 Note 2.1 |
Date expired (31.3.2012) |
CEN |
EN 703:2004+A1:2009 Agricultural machinery — Silage loading, mixing and/or chopping and distributing machines — Safety |
18.12.2009 |
|
|
CEN |
EN 706:1996+A1:2009 Agricultural machinery — Vine shoot tipping machines — Safety |
18.12.2009 |
|
|
CEN |
EN 707:1999+A1:2009 Agricultural machinery — Slurry tankers — Safety |
18.12.2009 |
|
|
CEN |
EN 709:1997+A4:2009 Agricultural and forestry machinery — Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) — Safety |
26.5.2010 |
EN 709:1997+A2:2009 Note 2.1 |
Date expired (31.12.2010) |
EN 709:1997+A4:2009/AC:2012 |
|
|
|
|
CEN |
EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment |
20.10.2010 |
|
|
EN 710:1997+A1:2010/AC:2012 |
|
|
|
|
CEN |
EN 741:2000+A1:2010 Continuous handling equipment and systems — Safety requirements for systems and their components for pneumatic handling of bulk materials |
8.4.2011 |
|
|
CEN |
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment — Part 1: Common safety requirements for industrial thermoprocessing equipment |
18.12.2009 |
|
|
CEN |
EN 746-2:2010 Industrial thermoprocessing equipment — Part 2: Safety requirements for combustion and fuel handling systems |
20.10.2010 |
|
|
CEN |
EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment — Part 3: Safety requirements for the generation and use of atmosphere gases |
8.9.2009 |
|
|
CEN |
EN 786:1996+A2:2009 Garden equipment — Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety |
18.12.2009 |
|
|
CEN |
EN 791:1995+A1:2009 Drill rigs — Safety |
8.9.2009 |
|
|
CEN |
EN 792-13:2000+A1:2008 Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools |
8.9.2009 |
|
|
CEN |
EN 809:1998+A1:2009 Pumps and pump units for liquids — Common safety requirements |
18.12.2009 |
|
|
EN 809:1998+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 818-1:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 1: General conditions of acceptance |
8.9.2009 |
|
|
CEN |
EN 818-2:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 2: Medium tolerance chain for chain slings — Grade 8 |
8.9.2009 |
|
|
CEN |
EN 818-3:1999+A1:2008 Short link chain for lifting purposes — Safety — Part 3: Medium tolerance chain for chain slings — Grade 4 |
8.9.2009 |
|
|
CEN |
EN 818-4:1996+A1:2008 Short link chain for lifting purposes — Safety — Part 4: Chain slings — Grade 8 |
8.9.2009 |
|
|
CEN |
EN 818-5:1999+A1:2008 Short link chain for lifting purposes — Safety — Part 5: Chain slings — Grade 4 |
8.9.2009 |
|
|
CEN |
EN 818-6:2000+A1:2008 Short link chain for lifting purposes — Safety — Part 6: Chain slings — Specification for information for use and maintenance to be provided by the manufacturer |
8.9.2009 |
|
|
CEN |
EN 818-7:2002+A1:2008 Short link chain for lifting purposes — Safety — Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
8.9.2009 |
|
|
CEN |
EN 848-1:2007+A2:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines |
15.11.2012 |
EN 848-1:2007+A1:2009 Note 2.1 |
Date expired (31.3.2013) |
CEN |
EN 848-2:2007+A2:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 2: Single spindle hand fed/integrated fed routing machines |
15.11.2012 |
EN 848-2:2007+A1:2009 Note 2.1 |
Date expired (31.3.2013) |
CEN |
EN 848-3:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 3: Numerically controlled (NC) boring and routing machines |
5.4.2013 |
EN 848-3:2007+A2:2009 Note 2.1 |
Date expired (30.4.2013) |
CEN |
EN 859:2007+A2:2012 Safety of woodworking machines — Hand fed surface planing machines |
24.8.2012 |
EN 859:2007+A1:2009 Note 2.1 |
Date expired (31.12.2012) |
CEN |
EN 860:2007+A2:2012 Safety of woodworking machines — One side thickness planing machines |
24.8.2012 |
EN 860:2007+A1:2009 Note 2.1 |
Date expired (31.12.2012) |
CEN |
EN 861:2007+A2:2012 Safety of woodworking machines — Surface planing and thicknessing machines |
24.8.2012 |
EN 861:2007+A1:2009 Note 2.1 |
Date expired (31.12.2012) |
CEN |
EN 869:2006+A1:2009 Safety of machinery — Safety requirements for pressure metal diecasting units |
8.9.2009 |
|
|
CEN |
EN 908:1999+A1:2009 Agricultural and forestry machinery — Reel machines for irrigation — Safety |
18.12.2009 |
|
|
CEN |
EN 909:1998+A1:2009 Agricultural and forestry machinery — Centre pivot and moving lateral types irrigation machines — Safety |
18.12.2009 |
|
|
CEN |
EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines — Roughing, scouring, polishing and trimming machines — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 931:1997+A2:2009 Footwear manufacturing machines — Lasting machines — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 940:2009+A1:2012 Safety of woodworking machines — Combined woodworking machines |
5.6.2012 |
EN 940:2009 Note 2.1 |
Date expired (31.8.2012) |
CEN |
EN 972:1998+A1:2010 Tannery machines — Reciprocating roller machines — Safety requirements |
8.4.2011 |
|
|
EN 972:1998+A1:2010/AC:2011 |
|
|
|
|
CEN |
EN 996:1995+A3:2009 Piling equipment — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 1010-1:2004+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 1: Common requirements |
8.4.2011 |
|
|
CEN |
EN 1010-2:2006+A1:2010 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 2: Printing and varnishing machines including pre-press machinery |
8.4.2011 |
|
|
CEN |
EN 1010-3:2002+A1:2009 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 3: Cutting machines |
18.12.2009 |
|
|
CEN |
EN 1010-4:2004+A1:2009 Safety of machinery — Safety requirements for the design and construction of printing and paper converting machines — Part 4: Bookbinding, paper converting and finishing machines |
18.12.2009 |
|
|
CEN |
EN 1012-1:2010 Compressors and vacuum pumps — Safety requirements — Part 1: Air compressors |
8.4.2011 |
|
|
CEN |
EN 1012-2:1996+A1:2009 Compressors and vacuum pumps — Safety requirements — Part 2: Vacuum pumps |
18.12.2009 |
|
|
CEN |
EN 1012-3:2013 Compressors and vacuum pumps — Safety requirements — Part 3: Process compressors |
This is the first publication |
|
|
CEN |
EN 1028-1:2002+A1:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 1: Classification — General and safety requirements |
8.9.2009 |
|
|
CEN |
EN 1028-2:2002+A1:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps with primer — Part 2: Verification of general and safety requirements |
8.9.2009 |
|
|
CEN |
EN 1034-1:2000+A1:2010 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 1: Common requirements |
26.5.2010 |
|
|
CEN |
EN 1034-2:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 2: Barking drums |
26.5.2010 |
|
|
CEN |
EN 1034-3:2011 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 3: Rereelers and winders |
29.2.2012 |
EN 1034-3:1999+A1:2009 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN 1034-4:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 4: Pulpers and their loading facilities |
26.5.2010 |
|
|
CEN |
EN 1034-5:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 5: Sheeters |
26.5.2010 |
|
|
CEN |
EN 1034-6:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 6: Calender |
26.5.2010 |
|
|
CEN |
EN 1034-7:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 7: Chests |
26.5.2010 |
|
|
CEN |
EN 1034-8:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 8: Refining plants |
5.6.2012 |
|
|
CEN |
EN 1034-13:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 13: Machines for de-wiring bales and units |
26.5.2010 |
|
|
CEN |
EN 1034-14:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 14: Reel splitter |
26.5.2010 |
|
|
CEN |
EN 1034-16:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 16: Paper and board making machines |
5.6.2012 |
|
|
CEN |
EN 1034-17:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 17: Tissue making machines |
15.11.2012 |
|
|
CEN |
EN 1034-21:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 21: Coating machines |
15.11.2012 |
|
|
CEN |
EN 1034-22:2005+A1:2009 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 22: Wood Grinders |
26.5.2010 |
|
|
CEN |
EN 1034-26:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 26: Roll packaging machines |
24.8.2012 |
|
|
CEN |
EN 1034-27:2012 Safety of machinery — Safety requirements for the design and construction of paper making and finishing machines — Part 27: Roll handling systems |
15.11.2012 |
|
|
CEN |
EN 1114-1:2011 Plastics and rubber machines — Extruders and extrusion lines — Part 1: Safety requirements for extruders |
29.2.2012 |
|
|
CEN |
EN 1114-3:2001+A1:2008 Plastics and rubber machines — Extruders and extrusion lines — Part 3: Safety requirements for haul-offs |
8.9.2009 |
|
|
CEN |
EN 1127-2:2002+A1:2008 Explosive atmospheres — Explosion prevention and protection — Part 2: Basic concepts and methodology for mining |
8.9.2009 |
|
|
CEN |
EN 1175-1:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 1: General requirements for battery powered trucks |
8.4.2011 |
|
|
CEN |
EN 1175-2:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 2: General requirements of internal combustion engine powered trucks |
8.4.2011 |
|
|
CEN |
EN 1175-3:1998+A1:2010 Safety of industrial trucks — Electrical requirements — Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
8.4.2011 |
|
|
CEN |
EN 1218-1:1999+A1:2009 Safety of woodworking machines — Tenoning machines — Part 1: Single end tenoning machines with sliding table |
18.12.2009 |
|
|
CEN |
EN 1218-2:2004+A1:2009 Safety of woodworking machines — Tenoning machines — Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
8.9.2009 |
|
|
CEN |
EN 1218-3:2001+A1:2009 Safety of woodworking machines — Tenoning machines — Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers |
8.9.2009 |
|
|
CEN |
EN 1218-4:2004+A2:2009 Safety of woodworking machines — Tenoning machines — Part 4: Edge banding machines fed by chain(s) |
8.9.2009 |
|
|
CEN |
EN 1218-5:2004+A1:2009 Safety of woodworking machines — Tenoning machines — Part 5: One side profiling machines with fixed table and feed rollers or feed chain |
18.12.2009 |
|
|
CEN |
EN 1247:2004+A1:2010 Foundry machinery — Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
8.4.2011 |
|
|
CEN |
EN 1248:2001+A1:2009 Foundry machinery — Safety requirements for abrasive blasting equipment |
8.9.2009 |
|
|
CEN |
EN 1265:1999+A1:2008 Safety of machinery — Noise test code for foundry machines and equipment |
8.9.2009 |
|
|
CEN |
EN 1374:2000+A1:2010 Agricultural machinery — Silos stationary unloaders for round silos — Safety |
20.10.2010 |
|
|
CEN |
EN 1398:2009 Dock levellers — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 1417:1996+A1:2008 Plastics and rubber machines — Two roll mills — Safety requirements |
8.9.2009 |
|
|
EN 1417:1996+A1:2008/AC:2009 |
|
|
|
|
CEN |
EN 1459:1998+A3:2012 Safety of industrial trucks — Self-propelled variable reach trucks |
23.3.2012 |
|
|
CEN |
EN 1492-1:2000+A1:2008 Textile slings — Safety — Part 1: Flat woven webbing slings made of man-made fibres for general purpose use |
8.9.2009 |
|
|
CEN |
EN 1492-2:2000+A1:2008 Textile slings — Safety — Part 2: Roundslings made of man-made fibres for general purpose use |
8.9.2009 |
|
|
CEN |
EN 1492-4:2004+A1:2008 Textile slings — Safety — Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
8.9.2009 |
|
|
CEN |
EN 1493:2010 Vehicle lifts |
8.4.2011 |
EN 1493:1998+A1:2008 Note 2.1 |
Date expired (4.8.2011) |
CEN |
EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment |
8.9.2009 |
|
|
CEN |
EN 1495:1997+A2:2009 Lifting platforms — Mast climbing work platforms |
18.12.2009 |
|
|
EN 1495:1997+A2:2009/AC:2010 |
|
|
|
|
Warning: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC. |
||||
CEN |
EN 1501-1:2011 Refuse collection vehicles — General requirements and safety requirements — Part 1: Rear loaded refuse collection vehicles |
18.11.2011 |
EN 1501-1:1998+A2:2009 Note 2.1 |
Date expired (29.2.2012) |
CEN |
EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices — General requirements and safety requirements — Part 2: Side loaded refuse collection vehicles |
29.12.2009 |
|
|
CEN |
EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 3: Front loaded refuse collection vehicles |
8.9.2009 |
|
|
CEN |
EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices — General requirements and safety requirements — Part 4: Noise test code for refuse collection vehicles |
8.9.2009 |
|
|
CEN |
EN 1501-5:2011 Refuse collection vehicles — General requirements and safety requirements — Part 5: Lifting devices for refuse collection vehicles |
18.11.2011 |
EN 1501-1:1998+A2:2009 Note 2.1 |
Date expired (29.2.2012) |
CEN |
EN 1526:1997+A1:2008 Safety of industrial trucks — Additional requirements for automated functions on trucks |
8.9.2009 |
|
|
CEN |
EN 1539:2009 Dryers and ovens, in which flammable substances are released — Safety requirements |
26.5.2010 |
|
|
CEN |
EN 1547:2001+A1:2009 Industrial thermoprocessing equipment — Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
8.9.2009 |
|
|
CEN |
EN 1550:1997+A1:2008 Machine-tools safety — Safety requirements for the design and construction of work holding chucks |
8.9.2009 |
|
|
CEN |
EN 1554:2012 Conveyor belts — Drum friction testing |
24.8.2012 |
|
|
CEN |
EN 1570-1:2011 Safety requirements for lifting tables — Part 1: Lifting tables serving up to two fixed landings |
29.2.2012 |
EN 1570:1998+A2:2009 Note 2.1 |
Date expired (30.4.2012) |
CEN |
EN 1612-1:1997+A1:2008 Plastics and rubber machines — Reaction moulding machines — Part 1: Safety requirements for metering and mixing units |
8.9.2009 |
|
|
CEN |
EN 1672-2:2005+A1:2009 Food processing machinery — Basic concepts — Part 2: Hygiene requirements |
8.9.2009 |
|
|
CEN |
EN 1673:2000+A1:2009 Food processing machinery — Rotary rack ovens — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 1674:2000+A1:2009 Food processing machinery — Dough and pastry brakes — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 1677-1:2000+A1:2008 Components for slings — Safety — Part 1: Forged steel components, Grade 8 |
8.9.2009 |
|
|
CEN |
EN 1677-2:2000+A1:2008 Components for slings — Safety — Part 2: Forged steel lifting hooks with latch, Grade 8 |
8.9.2009 |
|
|
CEN |
EN 1677-3:2001+A1:2008 Components for slings — Safety — Part 3: Forged steel self-locking hooks — Grade 8 |
8.9.2009 |
|
|
CEN |
EN 1677-4:2000+A1:2008 Components for slings — Safety — Part 4: Links, Grade 8 |
8.9.2009 |
|
|
CEN |
EN 1677-5:2001+A1:2008 Components for slings — Safety — Part 5: Forged steel lifting hooks with latch — Grade 4 |
8.9.2009 |
|
|
CEN |
EN 1677-6:2001+A1:2008 Components for slings — Safety — Part 6: Links — Grade 4 |
8.9.2009 |
|
|
CEN |
EN 1678:1998+A1:2010 Food processing machinery — Vegetable cutting machines — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 1679-1:1998+A1:2011 Reciprocating internal combustion engines — Safety — Part 1: Compression ignition engines |
20.7.2011 |
|
|
CEN |
EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines |
8.9.2009 |
|
|
EN 1710:2005+A1:2008/AC:2010 |
|
|
|
|
CEN |
EN 1755:2000+A2:2013 Safety of industrial trucks — Operation in potentially explosive atmospheres — Use in flammable gas, vapour, mist and dust |
28.11.2013 |
EN 1755:2000+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
CEN |
EN 1756-1:2001+A1:2008 Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 1: Tail lifts for goods |
8.9.2009 |
|
|
CEN |
EN 1756-2:2004+A1:2009 Tail lifts — Platform lifts for mounting on wheeled vehicles — Safety requirements — Part 2: Tail lifts for passengers |
18.12.2009 |
|
|
CEN |
EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services — Safety requirements and testing |
26.5.2010 |
EN 1777:2004+A1:2009 Note 2.1 |
Date expired (30.9.2010) |
CEN |
EN 1804-1:2001+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 1: Support units and general requirements |
26.5.2010 |
|
|
CEN |
EN 1804-2:2001+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 2: Power set legs and rams |
26.5.2010 |
|
|
CEN |
EN 1804-3:2006+A1:2010 Machines for underground mines — Safety requirements for hydraulic powered roof supports — Part 3: Hydraulic control systems |
26.5.2010 |
|
|
CEN |
EN 1807-1:2013 Safety of woodworking machines — Band sawing machines — Part 1: Table band saws and band re-saws |
28.11.2013 |
EN 1807:1999+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
CEN |
EN 1807-2:2013 Safety of woodworking machines — Band sawing machines — Part 2: Log sawing machines |
28.11.2013 |
EN 1807:1999+A1:2009 Note 2.1 |
|
CEN |
EN 1808:1999+A1:2010 Safety requirements on Suspended Access Equipment — Design calculations, stability criteria, construction — Tests |
20.10.2010 |
|
|
CEN |
EN 1829-1:2010 High pressure water jet machines — Safety requirements — Part 1: Machines |
26.5.2010 |
|
|
CEN |
EN 1829-2:2008 High-pressure water jet machines — Safety requirements — Part 2: Hoses, hose lines and connectors |
8.9.2009 |
|
|
EN 1829-2:2008/AC:2011 |
|
|
|
|
CEN |
EN 1845:2007 Footwear manufacturing machines — Footwear moulding machines — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 1846-2:2009+A1:2013 Firefighting and rescue service vehicles — Part 2: Common requirements — Safety and performance |
28.11.2013 |
EN 1846-2:2009 Note 2.1 |
Date expired (28.11.2013) |
CEN |
EN 1846-3:2013 Firefighting and rescue service vehicles — Part 3: Permanently installed equipment — Safety and performance |
28.11.2013 |
EN 1846-3:2002+A1:2008 Note 2.1 |
Date expired (31.1.2014) |
CEN |
EN 1853:1999+A1:2009 Agricultural machinery — Trailers with tipping body — Safety |
18.12.2009 |
|
|
CEN |
EN 1870-3:2001+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
8.9.2009 |
|
|
CEN |
EN 1870-4:2012 Safety of woodworking machines — Circular sawing machines — Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
5.6.2012 |
EN 1870-4:2001+A1:2009 Note 2.1 |
Date expired (30.9.2012) |
CEN |
EN 1870-5:2002+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 5: Circular sawbenches/up-cutting cross-cut sawing machines |
15.11.2012 |
EN 1870-5:2002+A1:2009 Note 2.1 |
Date expired (31.3.2013) |
CEN |
EN 1870-6:2002+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading |
18.12.2009 |
|
|
CEN |
EN 1870-7:2012 Safety of woodworking machines — Circular sawing machines — Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
5.4.2013 |
EN 1870-7:2002+A1:2009 Note 2.1 |
Date expired (30.4.2013) |
CEN |
EN 1870-8:2012 Safety of woodworking machines — Circular sawing machines — Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
5.4.2013 |
EN 1870-8:2001+A1:2009 Note 2.1 |
Date expired (31.5.2013) |
CEN |
EN 1870-9:2012 Safety of woodworking machines — Circular sawing machines — Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
15.11.2012 |
EN 1870-9:2000+A1:2009 Note 2.1 |
Date expired (31.3.2013) |
CEN |
EN 1870-10:2013 Safety of woodworking machines — Circular sawing machines — Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
28.11.2013 |
EN 1870-10:2003+A1:2009 Note 2.1 |
Date expired (30.11.2013) |
CEN |
EN 1870-11:2013 Safety of woodworking machines — Circular sawing machines — Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
This is the first publication |
EN 1870-11:2003+A1:2009 Note 2.1 |
30.4.2014 |
CEN |
EN 1870-12:2013 Safety of woodworking machines — Circular sawing machines — Part 12: Pendulum cross-cut sawing machines |
This is the first publication |
EN 1870-12:2003+A1:2009 Note 2.1 |
30.4.2014 |
CEN |
EN 1870-13:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 13: Horizontal beam panel sawing machines |
5.6.2012 |
EN 1870-13:2007+A1:2009 Note 2.1 |
Date expired (30.9.2012) |
CEN |
EN 1870-14:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines |
5.6.2012 |
EN 1870-14:2007+A1:2009 Note 2.1 |
Date expired (30.9.2012) |
CEN |
EN 1870-15:2012 Safety of woodworking machines — Circular sawing machines — Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
5.4.2013 |
EN 1870-15:2004+A1:2009 Note 2.1 |
Date expired (30.4.2013) |
CEN |
EN 1870-16:2012 Safety of woodworking machines — Circular sawing machines — Part 16: Double mitre sawing machines for V cutting |
5.4.2013 |
EN 1870-16:2005+A1:2009 Note 2.1 |
Date expired (30.4.2013) |
CEN |
EN 1870-18:2013 Safety of woodworking machines — Circular sawing machines — Part 18: Dimension saws |
28.11.2013 |
EN 1870-1:2007+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
CEN |
EN 1870-19:2013 Safety of woodworking machines — Circular sawing machines — Part 19: Circular saw benches (with and without sliding table) and building site saws |
This is the first publication |
EN 1870-1:2007+A1:2009 Note 2.1 |
31.5.2014 |
CEN |
EN 1889-1:2011 Machines for underground mines — Mobile machines working underground — Safety — Part 1: Rubber tyred vehicles |
18.11.2011 |
|
|
CEN |
EN 1889-2:2003+A1:2009 Machines for underground mines — Mobile machines working underground — Safety — Part 2: Rail locomotives |
8.9.2009 |
|
|
CEN |
EN 1915-1:2013 Aircraft ground support equipment — General requirements — Part 1: Basic safety requirements |
28.11.2013 |
EN 1915-1:2001+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
CEN |
EN 1915-2:2001+A1:2009 Aircraft ground support equipment — General requirements — Part 2: Stability and strength requirements, calculations and test methods |
8.9.2009 |
|
|
CEN |
EN 1915-3:2004+A1:2009 Aircraft ground support equipment — General requirements — Part 3: Vibration measurement methods and reduction |
8.9.2009 |
|
|
CEN |
EN 1915-4:2004+A1:2009 Aircraft ground support equipment — General requirements — Part 4: Noise measurement methods and reduction |
8.9.2009 |
|
|
CEN |
EN 1953:2013 Atomising and spraying equipment for coating materials — Safety requirements |
28.11.2013 |
EN 1953:1998+A1:2009 Note 2.1 |
Date expired (31.3.2014) |
CEN |
EN 1974:1998+A1:2009 Food processing machinery — Slicing machines — Safety and hygiene requirements |
18.12.2009 |
|
|
CEN |
EN ISO 2151:2008 Acoustics — Noise test code for compressors and vacuum pumps — Engineering method (Grade 2) (ISO 2151:2004) |
8.9.2009 |
|
|
CEN |
EN ISO 2860:2008 Earth-moving machinery — Minimum access dimensions (ISO 2860:1992) |
8.9.2009 |
|
|
CEN |
EN ISO 2867:2011 Earth-moving machinery — Access systems (ISO 2867:2011) |
18.11.2011 |
EN ISO 2867:2008 Note 2.1 |
31.7.2014 |
CEN |
EN ISO 3164:2013 Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume (ISO 3164:2013) |
28.11.2013 |
EN ISO 3164:2008 Note 2.1 |
Date expired (30.11.2013) |
CEN |
EN ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010) |
20.10.2010 |
|
|
CEN |
EN ISO 3411:2007 Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
8.9.2009 |
|
|
CEN |
EN ISO 3449:2008 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements (ISO 3449:2005) |
8.9.2009 |
|
|
CEN |
EN ISO 3450:2011 Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems (ISO 3450:2011) |
29.2.2012 |
EN ISO 3450:2008 Note 2.1 |
Date expired (31.5.2012) |
CEN |
EN ISO 3457:2008 Earth-moving machinery — Guards — Definitions and requirements (ISO 3457:2003) |
8.9.2009 |
|
|
CEN |
EN ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements (ISO 3471:2008) |
8.9.2009 |
|
|
CEN |
EN ISO 3691-5:2009 Industrial trucks — Safety requirements and verification — Part 5: Pedestrian-propelled trucks (ISO 3691-5:2009) |
28.11.2013 |
|
|
CEN |
EN ISO 4254-1:2013 Agricultural machinery — Safety — Part 1: General requirements (ISO 4254-1:2013) |
28.11.2013 |
EN ISO 4254-1:2009 Note 2.1 |
Date expired (30.11.2013) |
CEN |
EN ISO 4254-5:2009 Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008) |
26.5.2010 |
|
|
EN ISO 4254-5:2009/AC:2011 |
|
|
|
|
CEN |
EN ISO 4254-6:2009 Agricultural machinery — Safety — Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009) |
26.5.2010 |
|
|
EN ISO 4254-6:2009/AC:2010 |
|
|
|
|
CEN |
EN ISO 4254-7:2009 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) |
26.5.2010 |
|
|
EN ISO 4254-7:2009/AC:2010 |
|
|
|
|
CEN |
EN ISO 4254-10:2009 Agricultural machinery — Safety — Part 10: Rotary tedders and rakes (ISO 4254-10:2009) |
26.5.2010 |
|
|
EN ISO 4254-10:2009/AC:2010 |
|
|
|
|
CEN |
EN ISO 4254-11:2010 Agricultural machinery — Safety — Part 11: Pick-up balers (ISO 4254-11:2010) |
8.4.2011 |
EN 704:1999+A1:2009 Note 2.1 |
Date expired (30.6.2011) |
CEN |
EN ISO 4254-12:2012 Agricultural machinery — Safety — Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012) |
24.8.2012 |
EN 745:1999+A1:2009 Note 2.1 |
Date expired (31.12.2012) |
CEN |
EN ISO 5395-1:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013) |
28.11.2013 |
EN 836:1997+A4:2011 Note 2.1 |
30.9.2014 |
CEN |
EN ISO 5395-2:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013) |
28.11.2013 |
EN 836:1997+A4:2011 Note 2.1 |
30.9.2014 |
CEN |
EN ISO 5395-3:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) |
28.11.2013 |
EN 836:1997+A4:2011 Note 2.1 |
30.9.2014 |
CEN |
EN ISO 5674:2009 Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) |
8.9.2009 |
|
|
CEN |
EN ISO 6682:2008 Earth-moving machinery — Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
8.9.2009 |
|
|
CEN |
EN ISO 6683:2008 Earth-moving machinery — Seat belts and seat belt anchorages — Performance requirements and tests (ISO 6683:2005) |
8.9.2009 |
|
|
CEN |
EN ISO 7096:2008 Earth-moving machinery — Laboratory evaluation of operator seat vibration (ISO 7096:2000) |
8.9.2009 |
|
|
EN ISO 7096:2008/AC:2009 |
|
|
|
|
CEN |
EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines — Part 1: Common safety requirements (ISO 8230-1:2008) |
8.9.2009 |
|
|
CEN |
EN ISO 8230-2:2008 Safety requirements for dry-cleaning machines — Part 2: Machines using perchloroethylene (ISO 8230-2:2008) |
8.9.2009 |
|
|
CEN |
EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines — Part 3: Machines using combustible solvents (ISO 8230-3:2008) |
8.9.2009 |
|
|
CEN |
EN ISO 9902-1:2001 Textile machinery — Noise test code — Part 1: Common requirements (ISO 9902-1:2001) |
18.12.2009 |
|
|
EN ISO 9902-1:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-2:2001 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) |
18.12.2009 |
|
|
EN ISO 9902-2:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-3:2001 Textile machinery — Noise test code — Part 3: Nonwoven machinery (ISO 9902-3:2001) |
18.12.2009 |
|
|
EN ISO 9902-3:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-4:2001 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001) |
18.12.2009 |
|
|
EN ISO 9902-4:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-5:2001 Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) |
18.12.2009 |
|
|
EN ISO 9902-5:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-6:2001 Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) |
18.12.2009 |
|
|
EN ISO 9902-6:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 9902-7:2001 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) |
18.12.2009 |
|
|
EN ISO 9902-7:2001/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 10218-1:2011 Robots and robotic devices — Safety requirements for industrial robots — Part 1: Robots (ISO 10218-1:2011) |
18.11.2011 |
EN ISO 10218-1:2008 Note 2.1 |
Date expired (1.1.2013) |
CEN |
EN ISO 10218-2:2011 Robots and robotic devices — Safety requirements for industrial robots — Part 2: Robot systems and integration (ISO 10218-2:2011) |
18.11.2011 |
|
|
CEN |
EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery — Part 1: Common requirements (ISO 10472-1:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery — Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery — Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10472-4:2008 Safety requirements for industrial laundry machinery — Part 4: Air dryers (ISO 10472-4:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery — Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery — Part 6: Ironing and fusing presses (ISO 10472-6:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 10517:2009 Powered hand-held hedge trimmers — Safety (ISO 10517:2009) |
18.12.2009 |
|
|
EN ISO 10517:2009/A1:2013 |
28.11.2013 |
Note 3 |
30.9.2014 |
|
CEN |
EN ISO 10821:2005 Industrial sewing machines — Safety requirements for sewing machines, units and systems (ISO 10821:2005) |
18.12.2009 |
|
|
EN ISO 10821:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (28.12.2009) |
|
CEN |
EN ISO 11102-1:2009 Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests (ISO 11102-1:1997) |
18.12.2009 |
|
|
CEN |
EN ISO 11102-2:2009 Reciprocating internal combustion engines — Handle starting equipment — Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) |
8.9.2009 |
|
|
CEN |
EN ISO 11111-1:2009 Textile machinery — Safety requirements — Part 1: Common requirements (ISO 11111-1:2009) |
18.12.2009 |
|
|
CEN |
EN ISO 11111-2:2005 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) |
18.12.2009 |
|
|
EN ISO 11111-2:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11111-3:2005 Textile machinery — Safety requirements — Part 3: Nonwoven machinery (ISO 11111-3:2005) |
18.12.2009 |
|
|
EN ISO 11111-3:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11111-4:2005 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) |
18.12.2009 |
|
|
EN ISO 11111-4:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11111-5:2005 Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005) |
18.12.2009 |
|
|
EN ISO 11111-5:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11111-6:2005 Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery (ISO 11111-6:2005) |
18.12.2009 |
|
|
EN ISO 11111-6:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11111-7:2005 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery (ISO 11111-7:2005) |
18.12.2009 |
|
|
EN ISO 11111-7:2005/A1:2009 |
18.12.2009 |
Note 3 |
Date expired (31.1.2010) |
|
CEN |
EN ISO 11148-1:2011 Hand-held non-electric power tools — Safety requirements — Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
24.8.2012 |
EN 792-1:2000+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 11148-2:2011 Hand-held non-electric power tools — Safety requirements — Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011) |
29.2.2012 |
EN 792-2:2000+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 11148-3:2012 Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers (ISO 11148-3:2012) |
5.4.2013 |
EN ISO 11148-3:2010 Note 2.1 |
Date expired (30.6.2013) |
CEN |
EN ISO 11148-4:2012 Hand-held non-electric power tools — Safety requirements — Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) |
5.4.2013 |
EN ISO 11148-4:2010 Note 2.1 |
Date expired (30.6.2013) |
CEN |
EN ISO 11148-5:2011 Hand-held non-electric power tools — Safety requirements — Part 5: Rotary percussive drills (ISO 11148-5:2011) |
29.2.2012 |
EN 792-5:2000+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 11148-6:2012 Hand-held non-electric power tools — Safety requirements — Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) |
5.4.2013 |
EN ISO 11148-6:2010 Note 2.1 |
Date expired (30.6.2013) |
CEN |
EN ISO 11148-7:2012 Hand-held non-electric power tools — Safety requirements — Part 7: Grinders (ISO 11148-7:2012) |
15.11.2012 |
EN 792-7:2001+A1:2008 Note 2.1 |
Date expired (28.2.2013) |
CEN |
EN ISO 11148-8:2011 Hand-held non-electric power tools — Safety requirements — Part 8: Sanders and polishers (ISO 11148-8:2011) |
29.2.2012 |
EN 792-8:2001+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 11148-9:2011 Hand-held non-electric power tools — Safety requirements — Part 9: Die grinders (ISO 11148-9:2011) |
29.2.2012 |
EN 792-9:2001+A1:2008 Note 2.1 |
Date expired (1.6.2012) |
CEN |
EN ISO 11148-10:2011 Hand-held non-electric power tools — Safety requirements — Part 10: Compression power tools (ISO 11148-10:2011) |
29.2.2012 |
EN 792-10:2000+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 11148-11:2011 Hand-held non-electric power tools — Safety requirements — Part 11: Nibblers and shears (ISO 11148-11:2011) |
29.2.2012 |
EN 792-11:2000+A1:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 11148-12:2012 Hand-held non-electric power tools — Safety requirements — Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
5.4.2013 |
EN 792-12:2000+A1:2008 Note 2.1 |
Date expired (30.6.2013) |
CEN |
EN ISO 11252:2013 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation (ISO 11252:2013) |
28.11.2013 |
EN ISO 11252:2008 Note 2.1 |
Date expired (28.2.2014) |
CEN |
EN ISO 11553-1:2008 Safety of machinery — Laser processing machines — Part 1: General safety requirements (ISO 11553-1:2005) |
8.9.2009 |
|
|
CEN |
EN ISO 11553-2:2008 Safety of machinery — Laser processing machines — Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) |
8.9.2009 |
|
|
CEN |
EN ISO 11553-3:2013 Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013) |
28.11.2013 |
|
|
CEN |
EN ISO 11680-1:2011 Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) |
29.2.2012 |
EN ISO 11680-1:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 11680-2:2011 Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 2: Machines for use with back-pack power source (ISO 11680-2:2011) |
29.2.2012 |
EN ISO 11680-2:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 11681-1:2011 Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service (ISO 11681-1:2011) |
29.2.2012 |
EN ISO 11681-1:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 11681-2:2011 Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service (ISO 11681-2:2011) |
29.2.2012 |
EN ISO 11681-2:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 11806-1:2011 Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) |
29.2.2012 |
EN ISO 11806:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 11806-2:2011 Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011) |
29.2.2012 |
|
|
CEN |
EN ISO 11850:2011 Machinery for forestry — General safety requirements (ISO 11850:2011) |
29.2.2012 |
EN 14861:2004+A1:2009 Note 2.1 |
Date expired (31.5.2012) |
CEN |
EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar — Safety requirements |
15.11.2012 |
EN 12001:2003+A1:2009 Note 2.1 |
Date expired (28.2.2013) |
CEN |
EN 12012-1:2007+A1:2008 Plastics and rubber machines — Size reduction machines — Part 1: Safety requirements for blade granulators |
8.9.2009 |
|
|
CEN |
EN 12012-3:2001+A1:2008 Plastics and rubber machines — Size reduction machines — Part 3: Safety requirements for shredders |
8.9.2009 |
|
|
CEN |
EN 12012-4:2006+A1:2008 Plastics and rubber machines — Size reduction machines — Part 4: Safety requirements for agglomerators |
8.9.2009 |
|
|
CEN |
EN 12013:2000+A1:2008 Plastics and rubber machines — Internal mixers — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 12016:2013 Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity |
28.11.2013 |
EN 12016:2004+A1:2008 Note 2.1 |
Date expired (28.2.2014) |
CEN |
EN 12041:2000+A1:2009 Food processing machinery — Moulders — Safety and hygiene requirements |
18.12.2009 |
|
|
CEN |
EN 12042:2005+A1:2010 Food processing machinery — Automatic dividers — Safety and hygiene requirements |
8.4.2011 |
|
|
CEN |
EN 12043:2000+A1:2010 Food processing machinery — Intermediate provers — Safety and hygiene requirements |
8.4.2011 |
|
|
CEN |
EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Cutting and punching machines — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 12053:2001+A1:2008 Safety of industrial trucks — Test methods for measuring noise emissions |
8.9.2009 |
|
|
CEN |
EN 12077-2:1998+A1:2008 Cranes safety — Requirements for health and safety — Part 2: Limiting and indicating devices |
8.9.2009 |
|
|
CEN |
EN 12110:2002+A1:2008 Tunnelling machines — Air locks — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 12111:2002+A1:2009 Tunnelling machines — Road headers, continuous miners and impact rippers — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 12158-1:2000+A1:2010 Builders' hoists for goods — Part 1: Hoists with accessible platforms |
8.4.2011 |
|
|
CEN |
EN 12158-2:2000+A1:2010 Builders' hoists for goods — Part 2: Inclined hoists with non-accessible load carrying devices |
8.4.2011 |
|
|
CEN |
EN 12159:2012 Builders hoists for persons and materials with vertically guided cages |
5.4.2013 |
EN 12159:2000+A1:2009 Note 2.1 |
Date expired (31.5.2013) |
CEN |
EN 12162:2001+A1:2009 Liquid pumps — Safety requirements — Procedure for hydrostatic testing |
8.9.2009 |
|
|
CEN |
EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Shoe and leather presses — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 12267:2003+A1:2010 Food processing machinery — Circular saw machines — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 12268:2003+A1:2010 Food processing machinery — Band saw machines — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 12301:2000+A1:2008 Plastics and rubber machines — Calenders — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 12312-1:2013 Aircraft ground support equipment — Specific requirements — Part 1: Passenger stairs |
28.11.2013 |
EN 12312-1:2001+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
CEN |
EN 12312-2:2002+A1:2009 Aircraft ground support equipment — Specific requirements — Part 2: Catering vehicles |
8.9.2009 |
|
|
CEN |
EN 12312-3:2003+A1:2009 Aircraft ground support equipment — Specific requirements — Part 3: Conveyor belt vehicles |
8.9.2009 |
|
|
CEN |
EN 12312-4:2003+A1:2009 Aircraft ground support equipment — Specific requirements — Part 4: Passenger boarding bridges |
8.9.2009 |
|
|
CEN |
EN 12312-5:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 5: Aircraft fuelling equipment |
8.9.2009 |
|
|
CEN |
EN 12312-6:2004+A1:2009 Aircraft ground support equipment — Specific requirements — Part 6: Deicers and deicing/antiicing equipment |
8.9.2009 |
|
|
CEN |
EN 12312-7:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 7: Air-craft movement equipment |
8.9.2009 |
|
|
CEN |
EN 12312-8:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 8: Maintenance stairs and platforms |
8.9.2009 |
|
|
CEN |
EN 12312-9:2013 Aircraft ground support equipment — Specific requirements — Part 9: Container/Pallet loaders |
28.11.2013 |
EN 12312-9:2005+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
CEN |
EN 12312-10:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 10: Container/Pallet transfer transporters |
8.9.2009 |
|
|
CEN |
EN 12312-12:2002+A1:2009 Aircraft ground support equipment — Specific requirements — Part 12: Potable water service equipment |
8.9.2009 |
|
|
CEN |
EN 12312-13:2002+A1:2009 Aircraft ground support equipment — Specific requirements — Part 13: Lavatory service equipment |
8.9.2009 |
|
|
CEN |
EN 12312-14:2006+A1:2009 Aircraft ground support equipment — Specific requirements — Part 14: Disabled/incapacitated passenger boarding vehicles |
8.9.2009 |
|
|
CEN |
EN 12312-15:2006+A1:2009 Aircraft ground support equipment — Specific requirements — Part 15: Baggage and equipment tractors |
8.9.2009 |
|
|
CEN |
EN 12312-16:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 16: Air start equipment |
8.9.2009 |
|
|
CEN |
EN 12312-17:2004+A1:2009 Aircraft ground support equipment — Specific requirements — Part 17: Air conditioning equipment |
8.9.2009 |
|
|
CEN |
EN 12312-18:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 18: Nitrogen or Oxygen units |
8.9.2009 |
|
|
CEN |
EN 12312-19:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
8.9.2009 |
|
|
CEN |
EN 12312-20:2005+A1:2009 Aircraft ground support equipment — Specific requirements — Part 20: Electrical ground power units |
8.9.2009 |
|
|
CEN |
EN 12321:2003+A1:2009 Underground mining machinery — Specification for the safety requirements of armoured face conveyors |
8.9.2009 |
|
|
CEN |
EN 12331:2003+A2:2010 Food processing machinery — Mincing machines — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 12336:2005+A1:2008 Tunnelling machines — Shield machines, thrust boring machines, auger boring machines, lining erection equipment — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 12348:2000+A1:2009 Core drilling machines on stand — Safety |
8.9.2009 |
|
|
CEN |
EN 12355:2003+A1:2010 Food processing machinery — Derinding-, skinning- and membrane removal machines — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 12385-1:2002+A1:2008 Steel wire ropes — Safety — Part 1: General requirements |
8.9.2009 |
|
|
CEN |
EN 12385-2:2002+A1:2008 Steel wire ropes — Safety — Part 2: Definitions, designation and classification |
8.9.2009 |
|
|
CEN |
EN 12385-3:2004+A1:2008 Steel wire ropes — Safety — Part 3: Information for use and maintenance |
8.9.2009 |
|
|
CEN |
EN 12385-4:2002+A1:2008 Steel wire ropes — Safety — Part 4: Stranded ropes for general lifting applications |
8.9.2009 |
|
|
CEN |
EN 12385-10:2003+A1:2008 Steel wire ropes — Safety — Part 10: Spiral ropes for general structural applications |
8.9.2009 |
|
|
CEN |
EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Modular shoe repair equipment — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 12409:2008+A1:2011 Plastics and rubber machines — Thermoforming machines — Safety requirements |
29.2.2012 |
EN 12409:2008 Note 2.1 |
Date expired (30.4.2012) |
CEN |
EN 12417:2001+A2:2009 Machine tools — Safety — Machining centres |
8.9.2009 |
|
|
EN 12417:2001+A2:2009/AC:2010 |
|
|
|
|
CEN |
EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site — Safety |
8.9.2009 |
|
|
CEN |
EN 12463:2004+A1:2011 Food processing machinery — Filling machines and auxiliary machines — Safety and hygiene requirements |
20.7.2011 |
|
|
CEN |
EN 12505:2000+A1:2009 Food processing machinery — Centrifugal machines for processing edible oils and fats — Safety and hygiene requirements |
18.12.2009 |
|
|
CEN |
EN 12525:2000+A2:2010 Agricultural machinery — Front loaders — Safety |
26.5.2010 |
|
|
CEN |
EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines — Noise test code — Common requirements |
8.9.2009 |
|
|
CEN |
EN 12547:1999+A1:2009 Centrifuges — Common safety requirements |
8.9.2009 |
|
|
CEN |
EN 12549:1999+A1:2008 Acoustics — Noise test code for fastener driving tools — Engineering method |
8.9.2009 |
|
|
CEN |
EN 12581:2005+A1:2010 Coating plants — Machinery for dip coating and electrodeposition of organic liquid coating material — Safety requirements |
20.10.2010 |
|
|
CEN |
EN 12601:2010 Reciprocating internal combustion engine driven generating sets — Safety |
8.4.2011 |
|
|
CEN |
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure — Safety requirements |
20.10.2010 |
|
|
CEN |
EN 12622:2009+A1:2013 Safety of machine tools — Hydraulic press brakes |
This is the first publication |
EN 12622:2009 Note 2.1 |
30.4.2014 |
CEN |
EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 1: Common requirements |
8.4.2011 |
|
|
CEN |
EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 2: Block making machines |
8.4.2011 |
|
|
CEN |
EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 3: Slide and turntable machines |
8.4.2011 |
|
|
CEN |
EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 4:Concrete roof tile making machines |
8.4.2011 |
|
|
CEN |
EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-1: Pipe making machines manufacturing in the vertical axis |
8.4.2011 |
|
|
CEN |
EN 12629-5-2:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-2: Pipe making machines manufacturing in the horizontal axis |
8.4.2011 |
|
|
CEN |
EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-3: Pipe prestressing machines |
8.4.2011 |
|
|
CEN |
EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 5-4: Concrete pipe coating machines |
8.4.2011 |
|
|
CEN |
EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
8.4.2011 |
|
|
CEN |
EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
8.4.2011 |
|
|
CEN |
EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety — Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) |
8.4.2011 |
|
|
CEN |
EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates — Installation and use |
8.9.2009 |
|
|
CEN |
EN 12643:1997+A1:2008 Earth-moving machinery — Rubber-tyred machines — Steering requirements (ISO 5010:1992 modified) |
8.9.2009 |
|
|
CEN |
EN 12644-1:2001+A1:2008 Cranes — Information for use and testing — Part 1: Instructions |
8.9.2009 |
|
|
CEN |
EN 12644-2:2000+A1:2008 Cranes — Information for use and testing — Part 2: Marking |
8.9.2009 |
|
|
CEN |
EN 12649:2008+A1:2011 Concrete compactors and smoothing machines — Safety |
18.11.2011 |
EN 12649:2008 Note 2.1 |
Date expired (31.1.2012) |
CEN |
EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines — Nailing machines — Safety requirements |
18.12.2009 |
|
|
CEN |
EN 12693:2008 Refrigerating systems and heat pumps — Safety and environmental requirements — Positive displacement refrigerant compressors |
8.9.2009 |
|
|
CEN |
EN 12717:2001+A1:2009 Safety of machine tools — Drilling machines |
8.9.2009 |
|
|
CEN |
EN 12733:2001+A1:2009 Agricultural and forestry machinery — Pedestrian controlled motor mowers — Safety |
8.9.2009 |
|
|
CEN |
EN 12750:2013 Safety of woodworking machines — Four sided moulding machines |
28.11.2013 |
EN 12750:2001+A1:2009 Note 2.1 |
Date expired (28.11.2013) |
CEN |
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment — Safety requirements |
20.10.2010 |
|
|
CEN |
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials — Safety requirements — Part 1: Mixing machinery for use in vehicle refinishing |
20.10.2010 |
|
|
CEN |
EN 12779:2004+A1:2009 Safety of woodworking machines — Chip and dust extraction systems with fixed installation — Safety related performances and safety requirements |
18.12.2009 |
|
|
CEN |
EN 12851:2005+A1:2010 Food processing machinery — Catering attachments for machines having an auxiliary drive hub — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 12852:2001+A1:2010 Food processing machinery — Food processors and blenders — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 12853:2001+A1:2010 Food processing machinery — Hand-held blenders and whisks — Safety and hygiene requirements |
20.10.2010 |
|
|
|
EN 12853:2001+A1:2010/AC:2010 |
|
|
|
CEN |
EN 12854:2003+A1:2010 Food processing machinery — Beam mixers — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 12855:2003+A1:2010 Food processing machinery — Rotating bowl cutters — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 12881-1:2005+A1:2008 Conveyor belts — Fire simulation flammability testing — Part 1: Propane burner tests |
8.9.2009 |
|
|
CEN |
EN 12881-2:2005+A1:2008 Conveyor belts — Fire simulation flammability testing — Part 2: Large scale fire test |
8.9.2009 |
|
|
CEN |
EN 12882:2008 Conveyor belts for general purpose use — Electrical and flammability safety requirements |
8.9.2009 |
|
|
CEN |
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 1: Common safety requirements |
20.10.2010 |
|
|
CEN |
EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 2: Safety of machines using water based cleaning liquids |
8.9.2009 |
|
|
CEN |
EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours — Part 3: Safety of machines using flammable cleaning liquids |
8.9.2009 |
|
|
CEN |
EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours — Part 4: Safety of machines using halogenated solvents |
8.9.2009 |
|
|
CEN |
EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry — Power take-off (PTO) drive shafts and their guards — Safety |
18.12.2009 |
|
|
CEN |
EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates — Safety devices for power operated doors and gates — Requirements and test methods |
18.12.2009 |
|
|
CEN |
EN 12981:2005+A1:2009 Coating plants — Spray booths for application of organic powder coating material — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 12984:2005+A1:2010 Food processing machinery — Portable and/or hand-guided machines and appliances with mechanically driven cutting tools — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 12999:2011+A1:2012 Cranes — Loader cranes |
24.8.2012 |
EN 12999:2011 Note 2.1 |
Date expired (31.12.2012) |
CEN |
EN 13000:2010 Cranes — Mobile cranes |
26.5.2010 |
|
|
EN 13000:2010/AC:2010 |
|
|
|
|
CEN |
EN 13001-1:2004+A1:2009 Cranes — General design — Part 1: General principles and requirements |
8.9.2009 |
|
|
EN 13001-1:2004+A1:2009/AC:2009 |
|
|
|
|
CEN |
EN 13001-2:2011 Crane safety — General design — Part 2: Load actions |
18.11.2011 |
EN 13001-2:2004+A3:2009 Note 2.1 |
Date expired (18.11.2011) |
EN 13001-2:2011/AC:2012 |
|
|
|
|
CEN |
EN 13001-3-1:2012+A1:2013 Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure |
28.11.2013 |
EN 13001-3-1:2012 Note 2.1 |
Date expired (31.1.2014) |
CEN |
EN 13015:2001+A1:2008 Maintenance for lifts and escalators — Rules for maintenance instructions |
8.9.2009 |
|
|
CEN |
EN 13019:2001+A1:2008 Machines for road surface cleaning — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 13020:2004+A1:2010 Road surface treatment machines — Safety requirements |
20.10.2010 |
|
|
CEN |
EN 13021:2003+A1:2008 Winter service machines — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment — Accuracy grades 2 and 3 |
26.5.2010 |
|
|
CEN |
EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 1: Storage, handling and transportation equipment inside the factory |
8.9.2009 |
|
|
CEN |
EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 2: Storage, handling and transportation equipment outside the factory |
8.9.2009 |
|
|
CEN |
EN 13035-3:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 3: Cutting machines |
18.12.2009 |
|
|
EN 13035-3:2003+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 4: Tilting tables |
26.5.2010 |
|
|
CEN |
EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 5: Machines and installations for stacking and de-stacking |
26.5.2010 |
|
|
CEN |
EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 6: Machines for break-out |
26.5.2010 |
|
|
CEN |
EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 7: Cutting machines for laminated glass |
26.5.2010 |
|
|
CEN |
EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 9: Washing installations |
26.5.2010 |
|
|
CEN |
EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass — Safety requirements — Part 11: Drilling machines |
26.5.2010 |
|
|
CEN |
EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 1: Gob feeder |
18.12.2009 |
|
|
CEN |
EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 2: Handling machines for feeding |
18.12.2009 |
|
|
CEN |
EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 3: IS machines |
18.12.2009 |
|
|
CEN |
EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass — Safety requirements — Part 5: Presses |
18.12.2009 |
|
|
CEN |
EN 13059:2002+A1:2008 Safety of industrial trucks — Test methods for measuring vibration |
8.9.2009 |
|
|
CEN |
EN 13102:2005+A1:2008 Ceramic machines — Safety — Loading and unloading of fine clay tiles |
8.9.2009 |
|
|
CEN |
EN 13112:2002+A1:2009 Tannery machines — Splitting and bandknife shearing machines — Safety requirements |
26.5.2010 |
|
|
CEN |
EN 13113:2002+A1:2010 Tannery machines — Roller coating machines — Safety requirements |
8.4.2011 |
|
|
CEN |
EN 13114:2002+A1:2009 Tannery machines — Rotating process vessels — Safety requirements |
26.5.2010 |
|
|
CEN |
EN 13118:2000+A1:2009 Agricultural machinery — Potato harvesting equipment — Safety |
18.12.2009 |
|
|
CEN |
EN 13120:2009 Internal blinds — Performance requirements including safety |
8.9.2009 |
|
|
CEN |
EN 13128:2001+A2:2009 Safety of machine tools — Milling machines (including boring machines) |
8.9.2009 |
|
|
EN 13128:2001+A2:2009/AC:2010 |
|
|
|
|
CEN |
EN 13135:2013 Cranes — Safety — Design — Requirements for equipment |
28.11.2013 |
EN 13135-2:2004+A1:2010 EN 13135-1:2003+A1:2010 Note 2.1 |
Date expired (28.11.2013) |
CEN |
EN 13140:2000+A1:2009 Agricultural machinery — Sugar beet and fodder beet harvesting equipment — Safety |
18.12.2009 |
|
|
CEN |
EN 13155:2003+A2:2009 Cranes — Safety — Non-fixed load lifting attachments |
8.9.2009 |
|
|
CEN |
EN 13157:2004+A1:2009 Cranes — Safety — Hand powered cranes |
18.12.2009 |
|
|
CEN |
EN 13204:2004+A1:2012 Double acting hydraulic rescue tools for fire and rescue service use — Safety and performance requirements |
24.8.2012 |
|
|
CEN |
EN 13208:2003+A1:2010 Food processing machinery — Vegetable peelers — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 13218:2002+A1:2008 Machine tools — Safety — Stationary grinding machines |
8.9.2009 |
|
|
EN 13218:2002+A1:2008/AC:2010 |
|
|
|
|
CEN |
EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates — Product standard — Part 1: Products without fire resistance or smoke control characteristics |
18.11.2011 |
|
|
CEN |
EN 13288:2005+A1:2009 Food processing machinery — Bowl lifting and tilting machines — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13289:2001+A1:2013 Pasta processing plants — Dryers and coolers — Safety and hygiene requirements |
28.11.2013 |
|
|
CEN |
EN 13355:2004+A1:2009 Coating plants — Combined booths — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 13367:2005+A1:2008 Ceramic machines — Safety — Transfer platforms and cars |
8.9.2009 |
|
|
EN 13367:2005+A1:2008/AC:2009 |
|
|
|
|
CEN |
EN 13378:2001+A1:2013 Pasta processing plants — Pasta presses — Safety and hygiene requirements |
28.11.2013 |
|
|
CEN |
EN 13379:2001+A1:2013 Pasta processing plants — Spreader, stripping and cutting machine, stick return conveyor, stick magazine — Safety and hygiene requirements |
28.11.2013 |
|
|
CEN |
EN 13389:2005+A1:2009 Food processing machinery — Mixers with horizontal shafts — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13390:2002+A1:2009 Food processing machinery — Pie and tart machines — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13411-1:2002+A1:2008 Terminations for steel wire ropes — Safety — Part 1: Thimbles for steel wire rope slings |
8.9.2009 |
|
|
CEN |
EN 13411-2:2001+A1:2008 Terminations for steel wire ropes — Safety — Part 2: Splicing of eyes for wire rope slings |
8.9.2009 |
|
|
CEN |
EN 13411-3:2004+A1:2008 Terminations for steel wire ropes — Safety — Part 3: Ferrules and ferrule-securing |
8.9.2009 |
|
|
CEN |
EN 13411-4:2011 Terminations for steel wire ropes — Safety — Part 4: Metal and resin socketing |
20.7.2011 |
EN 13411-4:2002+A1:2008 Note 2.1 |
Date expired (30.9.2011) |
CEN |
EN 13411-5:2003+A1:2008 Terminations for steel wire ropes — Safety — Part 5: U-bolt wire rope grips |
8.9.2009 |
|
|
CEN |
EN 13411-6:2004+A1:2008 Terminations for steel wire ropes — Safety — Part 6: Asymmetric wedge socket |
8.9.2009 |
|
|
CEN |
EN 13411-7:2006+A1:2008 Terminations for steel wire ropes — Safety — Part 7: Symmetric wedge socket |
8.9.2009 |
|
|
CEN |
EN 13411-8:2011 Terminations for steel wire ropes — Safety — Part 8: Swage terminals and swaging |
18.11.2011 |
|
|
CEN |
EN 13414-1:2003+A2:2008 Steel wire rope slings — Safety — Part 1: Slings for general lifting service |
8.9.2009 |
|
|
CEN |
EN 13414-2:2003+A2:2008 Steel wire rope slings — Safety — Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
8.9.2009 |
|
|
CEN |
EN 13414-3:2003+A1:2008 Steel wire rope slings — Safety — Part 3: Grommets and cable-laid slings |
8.9.2009 |
|
|
CEN |
EN 13418:2013 Plastics and rubber machines — Winding machines for film or sheet — Safety requirements |
28.11.2013 |
EN 13418:2004+A1:2008 Note 2.1 |
Date expired (30.11.2013) |
CEN |
EN 13448:2001+A1:2009 Agricultural and forestry machinery — Inter-row mowing units — Safety |
18.12.2009 |
|
|
CEN |
EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines — Splitting, skiving, cutting, cementing and cement drying machines — Safety requirements |
20.10.2010 |
|
|
CEN |
EN 13524:2003+A1:2009 Highway maintenance machines — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 13525:2005+A2:2009 Forestry machinery — Wood chippers — Safety |
18.12.2009 |
|
|
CEN |
EN 13531:2001+A1:2008 Earth-moving machinery — Tip-over protection structure (TOPS) for compact excavators — Laboratory tests and performance requirements (ISO 12117:1997 modified) |
8.9.2009 |
|
|
CEN |
EN 13534:2006+A1:2010 Food processing machinery — Curing injection machines — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 13557:2003+A2:2008 Cranes — Controls and control stations |
8.9.2009 |
|
|
CEN |
EN 13561:2004+A1:2008 External blinds — Performance requirements including safety |
8.9.2009 |
|
|
CEN |
EN 13570:2005+A1:2010 Food processing machinery — Mixing machines — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 13586:2004+A1:2008 Cranes — Access |
8.9.2009 |
|
|
CEN |
EN 13591:2005+A1:2009 Food processing machinery — Fixed deck oven loaders — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13617-1:2012 Petrol filling stations — Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
24.8.2012 |
EN 13617-1:2004+A1:2009 Note 2.1 |
Date expired (30.11.2012) |
CEN |
EN 13621:2004+A1:2010 Food processing machinery — Salad dryers — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 13659:2004+A1:2008 Shutters — Performance requirements including safety |
8.9.2009 |
|
|
CEN |
EN 13675:2004+A1:2010 Safety of machinery — Safety requirements for tube forming and rolling mills and their finishing line equipment |
20.10.2010 |
|
|
CEN |
EN 13683:2003+A2:2011 Garden equipment — Integrally powered shredders/chippers — Safety |
20.7.2011 |
|
|
EN 13683:2003+A2:2011/AC:2013 |
|
|
|
|
CEN |
EN 13684:2004+A3:2009 Garden equipment — Pedestrian controlled lawn aerators and scarifiers — Safety |
26.5.2010 |
EN 13684:2004+A2:2009 Note 2.1 |
Date expired (30.6.2010) |
CEN |
EN 13731:2007 Lifting bag systems for fire and rescue service use — Safety and performance requirements |
8.9.2009 |
|
|
CEN |
EN 13732:2013 Food processing machinery — Bulk milk coolers on farms — Requirements for performance, safety and hygiene |
28.11.2013 |
EN 13732:2002+A2:2009 Note 2.1 |
Date expired (31.1.2014) |
CEN |
EN 13736:2003+A1:2009 Safety of machine tools — Pneumatic presses |
8.9.2009 |
|
|
CEN |
EN 13852-1:2013 Cranes — Offshore cranes — Part 1: General-purpose offshore cranes |
28.11.2013 |
|
|
CEN |
EN 13862:2001+A1:2009 Floor cutting-off machines — Safety |
8.9.2009 |
|
|
CEN |
EN 13870:2005+A1:2010 Food processing machinery — Chop cutting machines — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 13871:2005+A1:2010 Food processing machinery — Cubes cutting machinery — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 13885:2005+A1:2010 Food processing machinery — Clipping machines — Safety and hygiene requirements |
20.10.2010 |
|
|
CEN |
EN 13886:2005+A1:2010 Food processing machinery — Cooking kettles equipped with powered stirrer and/or mixer — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes — Dee shackles and bow shackles — Grade 6 — Safety |
8.9.2009 |
|
|
CEN |
EN 13898:2003+A1:2009 Machine tools — Safety — Sawing machines for cold metal |
8.9.2009 |
|
|
EN 13898:2003+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 13951:2012 Liquid pumps — Safety requirements — Agrifoodstuffs equipment; Design rules to ensure hygiene in use |
24.8.2012 |
EN 13951:2003+A1:2008 Note 2.1 |
Date expired (31.10.2012) |
CEN |
EN 13954:2005+A1:2010 Food processing machinery — Bread slicers — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 13977:2011 Railway applications — Track — Safety requirements for portable machines and trolleys for construction and maintenance |
20.7.2011 |
|
|
CEN |
EN 13985:2003+A1:2009 Machine tools — Safety — Guillotine shears |
8.9.2009 |
|
|
CEN |
EN 14010:2003+A1:2009 Safety of machinery — Equipment for power driven parking of motor vehicles — Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
18.12.2009 |
|
|
CEN |
EN 14017:2005+A2:2009 Agricultural and forestry machinery — Solid fertilizer distributors — Safety |
18.12.2009 |
EN 14017:2005+A1:2008 Note 2.1 |
Date expired (31.1.2010) |
CEN |
EN 14018:2005+A1:2009 Agricultural and forestry machinery — Seed drills — Safety |
18.12.2009 |
|
|
CEN |
EN 14033-3:2009+A1:2011 Railway applications — Track — Railbound construction and maintenance machines — Part 3: General safety requirements |
29.2.2012 |
EN 14033-3:2009 Note 2.1 |
Date expired (30.4.2012) |
CEN |
EN 14043:2005+A1:2009 High rise aerial appliances for fire service use — Turntable ladders with combined movements — Safety and performance requirements and test methods |
8.9.2009 |
|
|
CEN |
EN 14044:2005+A1:2009 High rise aerial appliances for fire service use — Turntable ladders with sequential movements — Safety and performance requirements and test methods |
8.9.2009 |
|
|
CEN |
EN 14070:2003+A1:2009 Safety of machine tools — Transfer and special-purpose machines |
8.9.2009 |
|
|
EN 14070:2003+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 14238:2004+A1:2009 Cranes — Manually controlled load manipulating devices |
18.12.2009 |
|
|
CEN |
EN ISO 14314:2009 Reciprocal internal combustion engines — Recoil starting equipment — General safety requirements (ISO 14314:2004) |
18.12.2009 |
|
|
CEN |
EN 14439:2006+A2:2009 Cranes — Safety — Tower cranes |
8.9.2009 |
|
|
CEN |
EN 14462:2005+A1:2009 Surface treatment equipment — Noise test code for surface treatment equipment including its ancillary handling equipment — Accuracy grades 2 and 3 |
8.9.2009 |
|
|
CEN |
EN 14466:2005+A1:2008 Fire-fighting pumps — Portable pumps — Safety and performance requirements, tests |
8.9.2009 |
|
|
CEN |
EN 14492-1:2006+A1:2009 Cranes — Power driven winches and hoists — Part 1: Power driven winches |
18.12.2009 |
|
|
EN 14492-1:2006+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 14492-2:2006+A1:2009 Cranes — Power driven winches and hoists — Part 2: Power driven hoists |
18.12.2009 |
|
|
EN 14492-2:2006+A1:2009/AC:2010 |
|
|
|
|
CEN |
EN 14502-2:2005+A1:2008 Cranes — Equipment for the lifting of persons — Part 2: Elevating control stations |
8.9.2009 |
|
|
CEN |
EN 14655:2005+A1:2010 Food processing machinery — Baguette slicers — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 14656:2006+A1:2010 Safety of machinery — Safety requirements for extrusion presses for steel and non-ferrous metals |
20.10.2010 |
|
|
CEN |
EN 14658:2005+A1:2010 Continuous handling equipment and systems — General safety requirements for continuous handling equipment for opencast lignite mining |
26.5.2010 |
|
|
CEN |
EN 14673:2006+A1:2010 Safety of machinery — Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
20.10.2010 |
|
|
CEN |
EN 14677:2008 Safety of machinery — Secondary steelmaking — Machinery and equipment for treatment of liquid steel |
8.9.2009 |
|
|
CEN |
EN 14681:2006+A1:2010 Safety of machinery — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
20.10.2010 |
|
|
CEN |
EN 14710-1:2005+A2:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements |
8.9.2009 |
|
|
CEN |
EN 14710-2:2005+A2:2008 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 2: Verification of general and safety requirements |
8.9.2009 |
|
|
CEN |
EN 14753:2007 Safety of machinery — Safety requirements for machinery and equipment for continuous casting of steel |
8.9.2009 |
|
|
CEN |
EN 14886:2008 Plastics and rubber machines — Bandknife cutting machines for block foams — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 14910:2007+A1:2009 Garden equipment — Walk-behind combustion engine powered trimmers — Safety |
8.9.2009 |
|
|
CEN |
EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment — Pedestrian controlled and hand-held machines — Determination of accessibility of hot surfaces |
8.9.2009 |
|
|
CEN |
EN 14957:2006+A1:2010 Food processing machinery — Dishwashing machines with conveyor — Safety and hygiene requirements |
26.5.2010 |
|
|
CEN |
EN 14958:2006+A1:2009 Food processing machinery — Machinery for grinding and processing flour and semolina — Safety and hygiene requirements |
8.9.2009 |
|
|
CEN |
EN 14973:2006+A1:2008 Conveyor belts for use in underground installations — Electrical and flammability safety requirements |
8.9.2009 |
|
|
CEN |
EN ISO 14982:2009 Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria (ISO 14982:1998) |
8.9.2009 |
|
|
CEN |
EN 14985:2012 Cranes — Slewing jib cranes |
23.3.2012 |
|
|
CEN |
EN 15000:2008 Safety of industrial trucks — Self propelled variable reach trucks — Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
8.9.2009 |
|
|
CEN |
EN 15011:2011 Cranes — Bridge and gantry cranes |
20.7.2011 |
|
|
CEN |
EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site — Safety |
8.9.2009 |
|
|
CEN |
EN 15056:2006+A1:2009 Cranes — Requirements for container handling spreaders |
8.9.2009 |
|
|
CEN |
EN 15059:2009 Snow grooming equipment — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 15061:2007+A1:2008 Safety of machinery — Safety requirements for strip processing line machinery and equipment |
8.9.2009 |
|
|
CEN |
EN 15067:2007 Plastics and rubber machines — Film converting machines for bags and sacks — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 15093:2008 Safety of Machinery — Safety requirements for hot flat rolling mills |
8.9.2009 |
|
|
CEN |
EN 15094:2008 Safety of Machinery — Safety requirements for cold flat rolling mills |
8.9.2009 |
|
|
CEN |
EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts — Safety requirements |
8.9.2009 |
|
|
CEN |
EN 15162:2008 Machines and plants for mining and tooling of natural stone — Safety requirements for gang saws |
8.9.2009 |
|
|
CEN |
EN 15163:2008 Machines and installations for the exploitation and processing of natural stone — Safety — Requirements for diamond wire saws |
8.9.2009 |
|
|
CEN |
EN 15164:2008 Machines and plants for mining and tooling of natural stone — Safety — Requirements for chain- and belt-slotting machines |
8.9.2009 |
|
|
CEN |
EN 15166:2008 Food processing machinery — Automatic back splitting machines of butchery carcasses — Safety and hygiene requirements |
8.9.2009 |
|
|
CEN |
EN 15268:2008 Petrol filling stations — Safety requirements for the construction of submersible pump assemblies |
8.9.2009 |
|
|
CEN |
EN 15503:2009+A1:2013 Garden equipment — Garden blowers, vacuums and blower/vacuums — Safety |
This is the first publication |
EN 15503:2009 Note 2.1 |
30.4.2014 |
CEN |
EN 15695-1:2009 Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 1: Cab classification, requirements and test procedures |
26.5.2010 |
|
|
CEN |
EN 15695-2:2009 Agricultural tractors and self-propelled sprayers — Protection of the operator (driver) against hazardous substances — Part 2: Filters, requirements and test procedures |
26.5.2010 |
|
|
EN 15695-2:2009/AC:2011 |
|
|
|
|
CEN |
EN 15700:2011 Safety for conveyor belts for winter sport or leisure use |
29.2.2012 |
|
|
CEN |
EN ISO 15744:2008 Hand-held non-electric power tools — Noise measurement code — Engineering method (grade 2) (ISO 15744:2002) |
8.9.2009 |
|
|
CEN |
EN 15746-2:2010+A1:2011 Railway applications — Track — Road-rail machines and associated equipment — Part 2: General safety requirements |
29.2.2012 |
EN 15746-2:2010 Note 2.1 |
Date expired (30.4.2012) |
CEN |
EN 15774:2010 Food processing machinery — Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) — Safety and hygiene requirements |
8.4.2011 |
|
|
CEN |
EN 15811:2009 Agricultural machinery — Guards for moving parts of power transmission — Guard opening with tool (ISO/TS 28923:2007 modified) |
18.12.2009 |
|
|
EN 15811:2009/AC:2010 |
|
|
|
|
CEN |
EN 15830:2012 Rough-terrain variable reach trucks — Visibility — Test methods and verification |
24.8.2012 |
|
|
CEN |
EN 15861:2012 Food processing machinery — Smokehouses — Safety and hygiene requirements |
24.8.2012 |
|
|
CEN |
EN 15895:2011 Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools |
18.11.2011 |
|
|
CEN |
EN 15949:2012 Safety of machinery — Safety requirements for bar mills, structural steel mills and wire rod mills |
5.6.2012 |
|
|
CEN |
EN 15954-2:2013 Railway applications — Track — Trailers and associated equipment — Part 2: General safety requirements |
28.11.2013 |
|
|
CEN |
EN 15955-2:2013 Railway applications — Track — Demountable machines and associated equipment — Part 2: General safety requirements |
28.11.2013 |
|
|
CEN |
EN 15997:2011 All terrain vehicles (ATVs — Quads) — Safety requirements and test methods |
29.2.2012 |
|
|
EN 15997:2011/AC:2012 |
|
|
|
|
CEN |
EN 16005:2012 Power operated pedestrian doorsets — Safety in use — Requirements and test methods |
5.4.2013 |
|
|
CEN |
EN 16029:2012 Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads — Single-track two-wheel motor vehicles — Safety requirements and test methods |
24.8.2012 |
|
|
CEN |
EN ISO 16119-1:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 1: General (ISO 16119-1:2013) |
28.11.2013 |
|
|
CEN |
EN ISO 16119-2:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 2: Horizontal boom sprayers (ISO 16119-2:2013) |
28.11.2013 |
|
|
CEN |
EN ISO 16119-3:2013 Agricultural and forestry machinery — Environmental requirements for sprayers — Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013) |
28.11.2013 |
|
|
CEN |
EN 16230-1:2013 Leisure karts — Part 1: Safety requirements and test methods for karts |
28.11.2013 |
|
|
CEN |
EN 16246:2012 Agricultural machinery — Backhoes — Safety |
5.4.2013 |
|
|
CEN |
EN 16252:2012 Machines for compacting waste materials or recyclable fractions — Horizontal baling presses — Safety requirements |
5.4.2013 |
|
|
CEN |
EN ISO 19432:2012 Building construction machinery and equipment — Portable, hand-held, internal combustion engine driven cut-off machines — Safety requirements (ISO 19432:2012) |
15.11.2012 |
EN ISO 19432:2008 Note 2.1 |
Date expired (31.1.2013) |
CEN |
EN ISO 19932-1:2013 Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements (ISO 19932-1:2013) |
28.11.2013 |
|
|
CEN |
EN ISO 19932-2:2013 Equipment for crop protection — Knapsack sprayers — Part 2: Test methods (ISO 19932-2:2013) |
28.11.2013 |
|
|
CEN |
EN ISO 20361:2009 Liquid pumps and pump units — Noise test code — Grades 2 and 3 of accuracy (ISO 20361:2007) |
8.9.2009 |
|
|
EN ISO 20361:2009/AC:2010 |
|
|
|
|
CEN |
EN ISO 22867:2011 Forestry and gardening machinery — Vibration test code for portable hand-held machines with internal combustion engine — Vibration at the handles (ISO 22867:2011) |
29.2.2012 |
EN ISO 22867:2008 Note 2.1 |
Date expired (30.6.2012) |
CEN |
EN ISO 22868:2011 Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy) (ISO 22868:2011) |
20.7.2011 |
EN ISO 22868:2008 Note 2.1 |
Date expired (30.9.2011) |
CEN |
EN ISO 23125:2010 Machine tools — Safety — Turning machines (ISO 23125:2010) |
20.10.2010 |
|
|
EN ISO 23125:2010/A1:2012 |
24.8.2012 |
Note 3 |
Date expired (31.10.2012) |
|
CEN |
EN ISO 28139:2009 Agricultural and forestry machinery — Knapsack combustion-engine-driven mistblowers — Safety requirements (ISO 28139:2009) |
18.12.2009 |
|
|
CEN |
EN ISO 28881:2013 Machine tools — Safety — Electro-discharge machines (ISO 28881:2013) |
28.11.2013 |
EN 12957:2001+A1:2009 Note 2.1 |
Date expired (28.2.2014) |
EN ISO 28881:2013/AC:2013 |
|
|
|
|
CEN |
EN ISO 28927-1:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 1: Angle and vertical grinders (ISO 28927-1:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-2:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-3:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-4:2010 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straight grinders (ISO 28927-4:2010) |
8.4.2011 |
|
|
CEN |
EN ISO 28927-5:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 5: Drills and impact drills (ISO 28927-5:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-6:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 6: Rammers (ISO 28927-6:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-7:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 7: Nibblers and shears (ISO 28927-7:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-8:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-9:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
26.5.2010 |
|
|
CEN |
EN ISO 28927-10:2011 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
18.11.2011 |
|
|
CEN |
EN ISO 28927-11:2011 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 11: Stone hammers (ISO 28927-11:2011) |
20.7.2011 |
|
|
CEN |
EN ISO 28927-12:2012 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 12: Die grinders (ISO 28927-12:2012) |
5.4.2013 |
|
|
Standards developed by CENELEC Standards developed by CENELEC are not classified as A, B or C-type standards in this list. |
||||
Cenelec |
EN 50223:2010 Stationary electrostatic application equipment for ignitable flock material — Safety requirements |
20.10.2010 |
|
|
Cenelec |
EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material — Safety requirements |
26.5.2010 |
|
|
EN 50348:2010/AC:2010 |
|
|
|
|
Cenelec |
EN 50569:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors |
This is the first publication |
|
|
Cenelec |
EN 50570:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers |
This is the first publication |
|
|
Cenelec |
EN 50571:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines |
This is the first publication |
|
|
Cenelec |
EN 50580:2012 Safety of hand-held electric motor operated tools — Particular requirements for spray guns |
5.6.2012 |
|
|
EN 50580:2012/A1:2013 |
28.11.2013 |
Note 3 |
22.7.2016 |
|
Cenelec |
EN 60204-1:2006 Safety of machinery — Electrical equipment of machines — Part 1: General requirements IEC 60204-1:2005 (Modified) |
26.5.2010 |
|
|
EN 60204-1:2006/A1:2009 IEC 60204-1:2005/A1:2008 |
26.5.2010 |
Note 3 |
Date expired (1.2.2012) |
|
EN 60204-1:2006/AC:2010 |
|
|
|
|
Cenelec |
EN 60204-11:2000 Safety of machinery — Electrical equipment of machines — Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV IEC 60204-11:2000 |
26.5.2010 |
|
|
EN 60204-11:2000/AC:2010 |
|
|
|
|
Cenelec |
EN 60204-31:2013 Safety of machinery — Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems IEC 60204-31:2013 |
This is the first publication |
|
|
Cenelec |
EN 60204-32:2008 Safety of machinery — Electrical equipment of machines — Part 32: Requirements for hoisting machines IEC 60204-32:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60204-33:2011 Safety of machinery — Electrical equipment of machines — Part 33: Requirements for semiconductor fabrication equipment IEC 60204-33:2009 (Modified) |
18.11.2011 |
|
|
Cenelec |
EN 60335-1:2012 Household and similar electrical appliances — Safety — Part 1: General requirements IEC 60335-1:2010 (Modified) |
5.6.2012 |
EN 60335-1:2002 and its amendments Note 2.1 |
21.11.2014 |
EN 60335-1:2012/AC:2014 |
|
|
|
|
Cenelec |
EN 60335-2-36:2002 Household and similar electrical appliances — Safety — Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements IEC 60335-2-36:2002 |
5.4.2013 |
|
|
EN 60335-2-36:2002/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
EN 60335-2-36:2002/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-37:2002 Household and similar electrical appliances — Safety — Part 2-37: Particular requirements for commercial electric deep fat fryers IEC 60335-2-37:2002 |
5.4.2013 |
|
|
EN 60335-2-37:2002/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
EN 60335-2-37:2002/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-40:2003 Household and similar electrical appliances — Safety — Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers IEC 60335-2-40:2002 (Modified) |
28.11.2013 |
|
|
EN 60335-2-40:2003/A11:2004 |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
EN 60335-2-40:2003/A12:2005 |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
EN 60335-2-40:2003/A1:2006 IEC 60335-2-40:2002/A1:2005 (Modified) |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
EN 60335-2-40:2003/A2:2009 IEC 60335-2-40:2002/A2:2005 (Modified) |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
EN 60335-2-40:2003/A13:2012 |
28.11.2013 |
Note 3 |
11.7.2014 |
|
EN 60335-2-40:2003/AC:2010 |
|
|
|
|
EN 60335-2-40:2003/AC:2006 |
|
|
|
|
EN 60335-2-40:2003/A13:2012/AC:2013 |
|
|
|
|
Cenelec |
EN 60335-2-42:2003 Household and similar electrical appliances — Safety — Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens IEC 60335-2-42:2002 |
5.4.2013 |
|
|
EN 60335-2-42:2003/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
EN 60335-2-42:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-47:2003 Household and similar electrical appliances — Safety — Part 2-47: Particular requirements for commercial electric boiling pans IEC 60335-2-47:2002 |
5.4.2013 |
|
|
EN 60335-2-47:2003/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
EN 60335-2-47:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-48:2003 Household and similar electrical appliances — Safety — Part 2-48: Particular requirements for commercial electric grillers and toasters IEC 60335-2-48:2002 |
5.4.2013 |
|
|
EN 60335-2-48:2003/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
EN 60335-2-48:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-49:2003 Household and similar electrical appliances — Safety — Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm IEC 60335-2-49:2002 |
5.4.2013 |
|
|
EN 60335-2-49:2003/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
EN 60335-2-49:2003/AC:2007 |
|
|
|
|
Cenelec |
EN 60335-2-65:2003 Household and similar electrical appliances — Safety — Part 2-65: Particular requirements for air-cleaning appliances IEC 60335-2-65:2002 |
5.4.2013 |
|
|
EN 60335-2-65:2003/A11:2012 |
5.4.2013 |
Note 3 |
21.12.2014 |
|
Cenelec |
EN 60335-2-67:2009 Household and similar electrical appliances — Safety — Part 2-67: Particular requirements for floor treatment and floor cleaning machines for commercial use IEC 60335-2-67:2002 (Modified) + A1:2005 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60335-2-67:2012 Household and similar electrical appliances — Safety — Part 2-67: Particular requirements for floor treatment machines for commercial use IEC 60335-2-67:2012 (Modified) |
15.11.2012 |
EN 60335-2-67:2009 Note 2.1 |
3.5.2015 |
Cenelec |
EN 60335-2-68:2009 Household and similar electrical appliances — Safety — Part 2-68: Particular requirements for spray extraction machines for commercial use IEC 60335-2-68:2002 (Modified) + A1:2005 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60335-2-68:2012 Household and similar electrical appliances — Safety — Part 2-68: Particular requirements for spray extraction machines, for commercial use IEC 60335-2-68:2012 (Modified) |
15.11.2012 |
EN 60335-2-68:2009 Note 2.1 |
3.5.2015 |
Cenelec |
EN 60335-2-69:2009 Household and similar electrical appliances — Safety — Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use IEC 60335-2-69:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60335-2-69:2012 Household and similar electrical appliances — Safety — Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use IEC 60335-2-69:2012 (Modified) |
15.11.2012 |
EN 60335-2-69:2009 Note 2.1 |
28.3.2015 |
Cenelec |
EN 60335-2-72:2009 Household and similar electrical appliances — Safety — Part 2-72: Particular requirements for automatic machines for floor treatment for commercial use IEC 60335-2-72:2002 (Modified) + A1:2005 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60335-2-72:2012 Household and similar electrical appliances — Safety — Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use IEC 60335-2-72:2012 (Modified) |
15.11.2012 |
EN 60335-2-72:2009 Note 2.1 |
3.5.2015 |
Cenelec |
EN 60335-2-77:2010 Safety of household and similar appliances — Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers IEC 60335-2-77:2002 (Modified) |
8.4.2011 |
|
|
Cenelec |
EN 60335-2-79:2009 Household and similar electrical appliances — Safety — Part 2-79: Particular requirements for high pressure cleaners and steam cleaners IEC 60335-2-79:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 60335-2-79:2012 Household and similar electrical appliances — Safety — Part 2-79: Particular requirements for high pressure cleaners and steam cleaners IEC 60335-2-79:2012 (Modified) |
15.11.2012 |
EN 60335-2-79:2009 Note 2.1 |
3.4.2015 |
Cenelec |
EN 60745-1:2009 Hand-held motor-operated electric tools — Safety — Part 1: General requirements IEC 60745-1:2006 (Modified) |
18.12.2009 |
|
|
EN 60745-1:2009/A11:2010 |
8.4.2011 |
Note 3 |
Date expired (1.10.2013) |
|
EN 60745-1:2009/AC:2009 |
|
|
|
|
Cenelec |
EN 60745-2-1:2010 Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills IEC 60745-2-1:2003 (Modified) + A1:2008 |
20.10.2010 |
|
|
Cenelec |
EN 60745-2-2:2010 Hand-held motor-operated electric tools — Safety — Part 2-2: Particular requirements for screwdrivers and impact wrenches IEC 60745-2-2:2003 (Modified) + A1:2008 |
20.10.2010 |
|
|
Cenelec |
EN 60745-2-3:2011 Hand-held motor-operated electric tools — Safety — Part 2-3: Particular requirements for grinders, polishers and disk-type sanders IEC 60745-2-3:2006 (Modified) + A1:2010 (Modified) |
18.11.2011 |
|
|
EN 60745-2-3:2011/A2:2013 IEC 60745-2-3:2006/A2:2012 (Modified) |
28.11.2013 |
Note 3 |
25.2.2016 |
|
Cenelec |
EN 60745-2-4:2009 Hand-held motor-operated electric tools — Safety — Part 2-4: Particular requirements for sanders and polishers other than disk type IEC 60745-2-4:2002 (Modified) + A1:2008 (Modified) |
26.5.2010 |
|
|
EN 60745-2-4:2009/A11:2011 |
29.2.2012 |
Note 3 |
14.11.2014 |
|
Cenelec |
EN 60745-2-5:2010 Hand-held motor-operated electric tools — Safety — Part 2-5: Particular requirements for circular saws IEC 60745-2-5:2010 (Modified) |
8.4.2011 |
|
|
Cenelec |
EN 60745-2-6:2010 Hand-held motor-operated electric tools — Safety — Part 2-6: Particular requirements for hammers IEC 60745-2-6:2003 (Modified) + A1:2006 + A2:2008 |
20.10.2010 |
|
|
Cenelec |
EN 60745-2-8:2009 Hand-held motor-operated electric tools — Safety — Part 2-8: Particular requirements for shears and nibblers IEC 60745-2-8:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-9:2009 Hand-held motor-operated electric tools — Safety — Part 2-9: Particular requirements for tappers IEC 60745-2-9:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-11:2010 Hand-held motor-operated electric tools — Safety — Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) IEC 60745-2-11:2003 (Modified) + A1:2008 |
20.10.2010 |
|
|
Cenelec |
EN 60745-2-12:2009 Hand-held motor-operated electric tools — Safety — Part 2-12: Particular requirements for concrete vibrators IEC 60745-2-12:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-13:2009 Hand-held motor-operated electric tools — Safety — Part 2-13: Particular requirements for chain saws IEC 60745-2-13:2006 (Modified) |
18.12.2009 |
|
|
EN 60745-2-13:2009/A1:2010 IEC 60745-2-13:2006/A1:2009 |
20.7.2011 |
Note 3 |
Date expired (1.12.2013) |
|
Cenelec |
EN 60745-2-14:2009 Hand-held motor-operated electric tools — Safety — Part 2-14: Particular requirements for planers IEC 60745-2-14:2003 (Modified) + A1:2006 (Modified) |
18.12.2009 |
|
|
EN 60745-2-14:2009/A2:2010 IEC 60745-2-14:2003/A2:2010 |
8.4.2011 |
Note 3 |
Date expired (1.6.2013) |
|
Cenelec |
EN 60745-2-15:2009 Hand-held motor-operated electric tools — Safety — Part 2-15: Particular requirements for hedge trimmers IEC 60745-2-15:2006 (Modified) |
18.12.2009 |
|
|
EN 60745-2-15:2009/A1:2010 IEC 60745-2-15:2006/A1:2009 |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
Cenelec |
EN 60745-2-16:2010 Hand-held motor-operated electric tools — Safety — Part 2-16: Particular requirements for tackers IEC 60745-2-16:2008 (Modified) |
8.4.2011 |
|
|
Cenelec |
EN 60745-2-17:2010 Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers IEC 60745-2-17:2010 (Modified) |
8.4.2011 |
|
|
Cenelec |
EN 60745-2-18:2009 Hand-held motor-operated electric tools — Safety — Part 2-18: Particular requirements for strapping tools IEC 60745-2-18:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-19:2009 Hand-held motor-operated electric tools — Safety — Part 2-19: Particular requirements for jointers IEC 60745-2-19:2005 (Modified) |
18.12.2009 |
|
|
EN 60745-2-19:2009/A1:2010 IEC 60745-2-19:2005/A1:2010 |
8.4.2011 |
Note 3 |
Date expired (1.6.2013) |
|
Cenelec |
EN 60745-2-20:2009 Hand-held motor-operated electric tools — Safety — Part 2-20: Particular requirements for band saws IEC 60745-2-20:2003 (Modified) + A1:2008 |
18.12.2009 |
|
|
Cenelec |
EN 60745-2-21:2009 Hand-held motor-operated electric tools — Safety — Part 2-21: Particular requirements for drain cleaners IEC 60745-2-21:2002 (Modified) |
18.12.2009 |
|
|
EN 60745-2-21:2009/A1:2010 IEC 60745-2-21:2002/A1:2008 |
20.7.2011 |
Note 3 |
Date expired (1.12.2013) |
|
Cenelec |
EN 60745-2-22:2011 Hand-held motor-operated electric tools — Safety — Part 2-22: Particular requirements for cut-off machines IEC 60745-2-22:2011 (Modified) |
18.11.2011 |
|
|
EN 60745-2-22:2011/A11:2013 |
28.11.2013 |
Note 3 |
17.12.2015 |
|
Cenelec |
EN 60745-2-23:2013 Hand-held motor-operated electric tools — Safety — Part 2-23: Particular requirements for die grinders and small rotary tools IEC 60745-2-23:2012 (Modified) |
28.11.2013 |
|
|
Cenelec |
EN 60947-5-3:2013 Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions (PDDB) IEC 60947-5-3:2013 |
This is the first publication |
|
|
Cenelec |
EN 60947-5-5:1997 Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function IEC 60947-5-5:1997 |
28.11.2013 |
|
|
EN 60947-5-5:1997/A1:2005 IEC 60947-5-5:1997/A1:2005 |
28.11.2013 |
Note 3 |
Date expired (28.11.2013) |
|
EN 60947-5-5:1997/A11:2013 |
28.11.2013 |
Note 3 |
3.12.2015 |
|
Cenelec |
EN 61029-1:2009 Safety of transportable motor-operated electric tools — Part 1: General requirements IEC 61029-1:1990 (Modified) |
18.12.2009 |
|
|
EN 61029-1:2009/A11:2010 |
8.4.2011 |
Note 3 |
Date expired (28.11.2013) |
|
EN 61029-1:2009/AC:2009 |
|
|
|
|
Cenelec |
EN 61029-2-1:2010 Safety of transportable motor-operated electric tools — Part 2-1: Particular requirements for circular saw benches IEC 61029-2-1:1993 (Modified) + A1:1999 + A2:2001 |
20.10.2010 |
|
|
Cenelec |
EN 61029-2-1:2012 Safety of transportable motor-operated electric tools — Part 2-1: Particular requirements for circular saw benches IEC 61029-2-1:1993 (Modified) + A1:1999 + A2:2001 |
5.4.2013 |
EN 61029-2-1:2010 Note 2.1 |
3.9.2015 |
Cenelec |
EN 61029-2-3:2011 Safety of transportable motor-operated electric tools — Part 2-3: Particular requirements for planers and thicknessers IEC 61029-2-3:1993 (Modified) + A1:2001 |
18.11.2011 |
|
|
Cenelec |
EN 61029-2-4:2011 Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders IEC 61029-2-4:1993 (Modified) + A1:2001 (Modified) |
18.11.2011 |
|
|
Cenelec |
EN 61029-2-6:2010 Safety of transportable motor-operated electric tools — Part 2-6: Particular requirements for diamond drills with water supply IEC 61029-2-6:1993 (Modified) |
20.10.2010 |
|
|
Cenelec |
EN 61029-2-8:2010 Safety of transportable motor-operated electric tools — Part 2-8: Particular requirements for single spindle vertical moulders IEC 61029-2-8:1995 (Modified) + A1:1999 + A2:2001 |
20.10.2010 |
|
|
Cenelec |
EN 61029-2-9:2009 Safety of transportable motor-operated electric tools — Part 2-9: Particular requirements for mitre saws IEC 61029-2-9:1995 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 61029-2-9:2012 Safety of transportable motor-operated electric tools — Part 2-9: Particular requirements for mitre saws IEC 61029-2-9:1995 (Modified) |
5.4.2013 |
EN 61029-2-9:2009 Note 2.1 |
3.9.2015 |
EN 61029-2-9:2012/A11:2013 |
28.11.2013 |
Note 3 |
12.8.2016 |
|
Cenelec |
EN 61029-2-10:2010 Safety of transportable motor-operated electric tools — Part 2-10: Particular requirements for cutting-off grinders IEC 61029-2-10:1998 (Modified) |
20.10.2010 |
|
|
EN 61029-2-10:2010/A11:2013 |
28.11.2013 |
Note 3 |
22.7.2016 |
|
Cenelec |
EN 61029-2-11:2009 Safety of transportable motor-operated electric tools — Part 2-11: Particular requirements for combined mitre and bench saws IEC 61029-2-11:2001 (Modified) |
18.12.2009 |
|
|
Cenelec |
EN 61029-2-11:2012 Safety of transportable motor-operated electric tools — Part 2-11: Particular requirements for combined mitre and bench saws IEC 61029-2-11:2001 (Modified) |
5.4.2013 |
EN 61029-2-11:2009 Note 2.1 |
3.9.2015 |
EN 61029-2-11:2012/A11:2013 |
28.11.2013 |
Note 3 |
12.8.2016 |
|
Cenelec |
EN 61029-2-12:2011 Safety of transportable motor-operated electric tools — Part 2-12: Particular requirements for threading machines IEC 61029-2-12:2010 (Modified) |
18.11.2011 |
|
|
Cenelec |
EN 61310-1:2008 Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals IEC 61310-1:2007 |
18.12.2009 |
|
|
Cenelec |
EN 61310-2:2008 Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking IEC 61310-2:2007 |
18.12.2009 |
|
|
Cenelec |
EN 61310-3:2008 Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators IEC 61310-3:2007 |
18.12.2009 |
|
|
Cenelec |
EN 61496-1:2004 Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests IEC 61496-1:2004 (Modified) |
26.5.2010 |
|
|
EN 61496-1:2004/A1:2008 IEC 61496-1:2004/A1:2007 |
26.5.2010 |
Note 3 |
Date expired (1.6.2011) |
|
EN 61496-1:2013 IEC 61496-1:2012 |
This is the first publication |
Note 3 |
10.5.2015 |
|
EN 61496-1:2004/AC:2010 |
|
|
|
|
Cenelec |
EN 61496-1:2013 Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests IEC 61496-1:2012 |
This is the first publication |
EN 61496-1:2004 and its amendments Note 2.1 |
10.5.2015 |
Cenelec |
EN 61800-5-2:2007 Adjustable speed electrical power drive systems — Part 5-2: Safety requirements — Functional IEC 61800-5-2:2007 |
18.12.2009 |
|
|
Cenelec |
EN 62061:2005 Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems IEC 62061:2005 |
26.5.2010 |
|
|
EN 62061:2005/A1:2013 IEC 62061:2005/A1:2012 |
28.11.2013 |
Note 3 |
18.12.2015 |
|
EN 62061:2005/AC:2010 |
|
|
|
Note 1: |
Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise. |
Note 2.1: |
The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
Note 2.2: |
The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
Note 2.3: |
The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected. |
Note 3: |
In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation. |
NOTE:
— |
Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No1025/2012. (2) |
— |
Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal. |
— |
References to Corrigenda ‘.../AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation. |
— |
Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union. |
— |
This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list. |
— |
More information about harmonised standards and other European standards on the Internet at http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm |
(1) ESO: European standardisation organisation:
— |
CEN: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5500811; fax + 32 2 5500819 (http://www.cen.eu) |
— |
CENELEC: Avenue Marnix 17, B-1000, Brussels, Tel.+32 2 5196871; fax + 32 2 5196919 (http://www.cenelec.eu) |
— |
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel.+33 492 944200; fax +33 493 654716, (http://www.etsi.eu) |
(2) OJ L 316, 14.11.2012, p. 12.