Accept Refuse

EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 32017R1134

Council Regulation (EU) 2017/1134 of 20 June 2017 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

OJ L 164, 27.6.2017, p. 6–27 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

In force

ELI: http://data.europa.eu/eli/reg/2017/1134/oj

27.6.2017   

EN

Official Journal of the European Union

L 164/6


COUNCIL REGULATION (EU) 2017/1134

of 20 June 2017

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)

The Union production of 69 agricultural and industrial products that are not listed in the Annex to Council Regulation (EU) No 1387/2013 (1) is inadequate or non-existent. It is, therefore, in the interest of the Union to completely suspend the autonomous Common Customs Tariff (‘CCT’) duties on those products.

(2)

It is necessary to modify the conditions for 71 suspensions of autonomous CCT duties currently listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends on the market. Certain product classifications have been amended to allow the industry to fully benefit from the suspensions in force. Moreover, the Annex to Regulation (EU) No 1387/2013 should be updated due to the need to align or clarify texts in some cases. The modified conditions relate to changes in the product description, classification or end-use requirements. The suspensions that require modifications should be deleted from the list of suspensions in the Annex to Regulation (EU) No 1387/2013, and the modified suspensions should be inserted into that list.

(3)

It is no longer in the interest of the Union to maintain the suspension of autonomous CCT duties for two of the products that are currently listed in the Annex to Regulation (EU) No 1387/2013.

(4)

In the interests of clarity, the entries modified by this Regulation should be marked with an asterisk.

(5)

Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(6)

As the changes regarding the suspensions for the products concerned provided for in this Regulation have to apply from 1 July 2017, this Regulation should enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1387/2013 is amended as follows:

(1)

the rows for the products listed in Annex I to this Regulation are inserted following the order of the CN codes indicated in the first column of the table in the Annex to Regulation (EU) No 1387/2013;

(2)

the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2

This Regulation shall enter into force on the date of its publication in the Official Journal of the European Union.

It shall apply from 1 July 2017.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Luxembourg, 20 June 2017.

For the Council

The President

H. DALLI


(1)  Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201).


ANNEX I

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

*ex 2818 30 00

30

Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)

0 %

31.12.2018

ex 2825 70 00

20

Molybdic Acid (CAS RN 7782-91-4)

0 %

31.12.2021

*ex 2842 10 00

40

Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations (2)

0 %

31.12.2021

*ex 2905 11 00

ex 2905 19 00

20

35

Methyl methanesulphonate (CAS RN 66-27-3)

0 %

31.12.2021

ex 2905 22 00

20

3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)

0 %

31.12.2021

ex 2909 30 90

15

{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)

0 %

31.12.2021

ex 2909 30 90

25

1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane

0 %

31.12.2021

*ex 2909 60 00

40

1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 2781-00-2) or mixture of isomers 1,4-Di(2-tert-butylperoxyisopropyl)benzene and 1,3-di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)

0 %

31.12.2017

ex 2912 19 00

10

Undecanal (CAS RN 112-44-7)

0 %

31.12.2021

ex 2915 12 00

10

Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1)

0 %

31.12.2021

*ex 2916 14 00

30

Allyl methacrylate (CAS RN 96-05-9) and its' isomers with a purity by weight of 98 % or more and containing at least:

0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6),

0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and

0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5)

0 %

31.12.2020

ex 2916 39 90

33

Methyl 4′-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2)

0 %

31.12.2021

ex 2916 39 90

73

(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)

0 %

31.12.2021

*ex 2920 29 00

ex 2920 90 70

50

50

Fosetyl-aluminium (CAS RN 39148-24-8)

0 %

31.12.2018

*ex 2920 29 00

ex 2920 90 70

60

40

Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides (2)

0 %

31.12.2021

ex 2922 19 00

40

(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)

0 %

31.12.2021

ex 2924 29 70

30

Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)

0 %

31.12.2021

ex 2924 29 70

50

N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3)

0 %

31.12.2021

ex 2926 90 70

30

4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)

0 %

31.12.2021

*ex 2931 90 00

05

Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN

0 %

31.12.2020

*ex 2932 14 00

ex 2940 00 00

10

40

1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)

0 %

31.12.2019

ex 2932 99 00

13

(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)

0 %

31.12.2021

ex 2932 99 00

18

4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)

0 %

31.12.2021

ex 2933 19 90

45

5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)

0 %

31.12.2021

ex 2933 19 90

55

5-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0)

0 %

31.12.2021

ex 2933 29 90

75

2,2′-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)

0 %

31.12.2021

ex 2933 39 99

10

2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)

0 %

31.12.2021

ex 2933 39 99

33

5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)

0 %

31.12.2021

ex 2933 39 99

41

2-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7)

0 %

31.12.2021

ex 2933 39 99

46

Fluopicolide (ISO) (CAS RN 239110-15-7) for use in the manufacture of pesticides (2)

0 %

31.12.2021

*ex 2933 59 95

ex 2933 99 80

88

51

Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides (2)

0 %

31.12.2021

ex 2933 99 80

42

(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)

0 %

31.12.2021

ex 2933 99 80

44

(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9)

0 %

31.12.2021

*ex 2933 99 80

53

Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) (5)

0 %

31.12.2018

*ex 2933 99 80

72

1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)

0 %

31.12.2018

ex 2934 99 90

46

4-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8)

0 %

31.12.2021

ex 2934 99 90

47

Thidiazuron (ISO) (CAS RN 51707-55-2) for use in the manufacture of pesticides (2)

0 %

31.12.2021

ex 2934 99 90

49

Cytidine 5′-(disodium phosphate) (CAS RN 6757-06-8)

0 %

31.12.2021

ex 2934 99 90

53

4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0)

0 %

31.12.2021

ex 2935 90 90

30

6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)

0 %

31.12.2021

*ex 3204 16 00

30

Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:

Colourant Reactive Yellow 201 (CAS RN 27624-67-5),

1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or

3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)

0 %

31.12.2019

ex 3204 17 00

22

Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight

0 %

31.12.2021

*ex 3204 17 00

24

Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 50 % or more by weight

0 %

31.12.2018

*ex 3215 90 70

30

Disposable cartridge ink, containing by weight:

1 % or more, but not more than 10 % of amorphous silicon dioxide or

3,8 % or more of dye C.I. Solvent Black 7 in organic solvents

for use in the marking of integrated circuits (2)

0 %

31.12.2018

*ex 3506 91 10

ex 3506 91 90

50

50

Preparation containing by weight:

15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers and

10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers

dissolved in:

Methyl ethyl ketone (CAS RN 78-93-3)

Heptane (CAS RN 142-82-5), and

Toluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8)

0 %

31.12.2020

ex 3811 21 00

11

Dispersing agent and oxidation inhibitor containing:

o-amino polyisobutylenephenol (CAS RN 78330-13-9),

more than 30 % by weight but not more than 50 % by weight of mineral oils,

used in the manufacture of blends of additives for lubricating oils (2)

0 %

31.12.2021

*ex 3811 21 00

19

Additives containing:

a polyisobutylene succinimide based mixture, and

more than 30 % but not more than 50 % by weight of mineral oils,

having a total base number of more than 40, for use in the manufacture of lubricating oils (2)

0 %

31.12.2019

ex 3811 29 00

75

Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils (2)

0 % (2)

31.12.2021

ex 3811 90 00

50

Corrosion inhibitor containing:

polyisobutenyl succinic acid and

more than 5 % and not more than 20 % by weight of mineral oils

for use in the manufacture of blends of additives for fuels (2)

0 %

31.12.2021

*ex 3815 90 90

40

Catalyst:

containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,

in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm

for use in the manufacture of acrylic acid (2)

0 %

31.12.2018

ex 3824 99 92

25

Preparation containing by weight:

25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8)

25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1)

10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3)

5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0)

1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6)

1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8)

Not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9)

0 %

31.12.2021

ex 3824 99 92

27

4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent

0 %

31.12.2021

ex 3824 99 92

30

Aqueous solution of caesium formate and potassium formate containing by weight:

1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1),

1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), and

whether or not containing not more than 9 % of additives

0 %

31.12.2021

*ex 3824 99 92

40

Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent

0 %

31.12.2020

*ex 3824 99 92

69

Preparation containing by weight:

80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)

7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and

not more than 1 % triphenyl phosphate (CAS RN 115-86-6)

0 %

31.12.2020

ex 3824 99 93

45

Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:

not more than 20 % of disodium sulphate, and

not more than 10 % of sodium chloride

0 %

31.12.2021

ex 3824 99 96

70

Powder containing by weight:

28 % or more but not more than 51 % of talc (CAS RN 14807-96-6)

30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7)

17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1)

0 %

31.12.2021

ex 3824 99 96

74

Mixture with a non-stoichiometric composition:

with a crystalline structure,

with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm

0 %

31.12.2021

ex 3824 99 96

80

Mixture consisting of:

64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9)

25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) and

not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)

0 %

31.12.2021

*ex 3901 10 10

ex 3901 90 80

20

50

High flow linear low density polyethylene-1-butene/LLDPE (CAS RN 25087-34-7) in form of powder, with

a melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min and

a density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 and

a vicat softening temperature of min. 94 °C

0 %

31.12.2019

ex 3906 90 90

53

Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260 °C, containing by weight:

75 % or more but not more than 85 % of polyacrylamide and

15 % or more but not more than 25 % of polyethylene glycol

0 %

31.12.2021

ex 3906 90 90

63

Copolymer of (Dimethoxymethylsilyl)propyl methacrylate, butylacrylate, allyl methacrylate, methyl methacrylate and cyclosiloxanes (CAS RN 143106-82-5)

0 %

31.12.2021

ex 3910 00 00

45

Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 mPa · s (CAS RN 70131-67-8)

0 %

31.12.2021

ex 3910 00 00

55

Preparation containing by weight:

55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2),

30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and

1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)

0 %

31.12.2021

*ex 3913 90 00

30

Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350 000

0 %

31.12.2018

ex 3920 99 59

70

Tetrafluoroethylene film, put up in rolls, with:

a thickness of 50 μm,

a melting point of 260 °C, and

a specific gravity of 1,75 (ASTM D792)

for use in the manufacture of semiconductor devices (2)

0 %

31.12.2021

*ex 3921 13 10

10

Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092

0 %

31.12.2018

ex 3921 19 00

50

Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with:

a total thickness of more than 0,05 mm but not more than 0,20 mm,

a water entry pressure between 5 and 200 kPa according to ISO 811, and

an air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5

0 %

31.12.2021

*ex 3923 10 90

10

Photomask or wafer compacts:

consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

having non porous, abrasion resistant or impact resistant surface properties,

fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and

with or without a gasket seal,

of a kind used in the photolithography or other semiconductor production to house photomasks or wafers

0 %

31.12.2021

*ex 3926 30 00

ex 8708 29 10

ex 8708 29 90

10

10

10

Plastic cover with cips for the exterior rear-view mirror of motor vehicles

0 %

p/st

31.12.2020

*ex 3926 90 97

20

Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls

0 %

p/st

31.12.2019

ex 3926 90 97

ex 8512 90 90

77

10

Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), of a kind used in car parking aid sensor systems

0 %

p/st

31.12.2021

ex 4016 99 57

10

Air intake hose for air supply to the combustion part of the engine comprising at least:

one flexible rubber hose,

one plastic hose, and

metal clips,

whether or not a resonator

for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

ex 4016 99 57

20

Rubber bumper strip with a silicone coating of a length not more than 1 200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 5911 90 99

ex 8421 99 90

30

92

Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more

0 %

31.12.2018

*ex 5911 90 99

40

Multi-layered non-woven polyester polishing pads, impregnated with polyurethane

0 %

31.12.2019

ex 6805 30 00

10

Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors (2)

0 %

31.12.2021

ex 7318 19 00

30

Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 7410 11 00

ex 8507 90 80

ex 8545 90 90

10

60

30

Roll of laminate foil of graphite and copper, with:

a width of 610 mm or more but not more than 620 mm, and

a diameter of 690 mm or more but not more than 710 mm,

for use in the manufacture of lithium-ion electric rechargeable batteries (2)

0 %

31.12.2021

*ex 7607 11 90

ex 7607 11 90

47

57

Aluminium foil in rolls:

having a purity of 99,99 % by weight,

of a thickness of 0,021 mm or more but not more than 0,2 mm,

with a width of 500 mm,

with a surface oxide layer by 3 to 4 nm thick,

and with a cubic texture of more than 95 %

0 %

31.12.2021

*ex 7607 19 90

ex 8507 90 80

10

80

Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:

a width of 595 mm or more but not more than 605 mm, and

a diameter of 690 mm or more but not more than 710 mm,

for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries (2)

0 %

31.12.2021

*ex 7616 99 10

ex 8708 99 10

ex 8708 99 97

30

60

50

Aluminium engine bracket, with dimensions of:

height of more than 10 mm but not more than 200 mm

width of more than 10 mm but not more than 200 mm

length of more than 10 mm but not more than 200 mm

equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:

internal porosity not more than 1 mm;

outer porosity not more than 2 mm;

Rockwell hardness HRB 10 or more

of a kind used in the production of suspensions systems for engines in motor vehicles

0 %

p/st

31.12.2019

*ex 8108 90 30

20

Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708 92 or 8714 10 40  (2)

0 %

31.12.2017

*ex 8108 90 50

10

Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1 000 mm or more but not more than 1 254 mm, for the manufacture of goods of subheading 8714 10  (2)

0 %

31.12.2018

*ex 8108 90 50

35

Plates, sheets and strips of an alloy of titanium

0 %

31.12.2021

*ex 8301 60 00

ex 8413 91 00

ex 8419 90 85

ex 8438 90 00

ex 8468 90 00

ex 8476 90 90

ex 8479 90 70

ex 8481 90 00

ex 8503 00 99

ex 8515 90 80

ex 8536 90 95

ex 8537 10 98

ex 8708 91 20

ex 8708 91 99

ex 8708 99 10

ex 8708 99 97

20

40

30

20

20

20

83

30

70

30

95

70

10

20

50

40

Keypads of silicone or plastic,

whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood,

whether or not printed or surface treated,

whether or not with electrical conducting elements,

whether or not with keypads foil glued on the keyboard,

whether or not with protective foil,

single or multilayer

0 %

p/st

31.12.2020

*ex 8409 91 00

ex 8409 99 00

30

50

Exhaust manifold with spiral-shaped gas turbine turbocharger component with:

a heat-resistance of not more than 1 050  °C, and

a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm

0 %

p/st

31.12.2018

ex 8409 99 00

40

Plastic or aluminum cylinder head cover with:

a camshaft position sensor (CMPS),

metal brackets for mounting on an engine, and

two or more gaskets,

for use in the manufacture of engines of motor vehicles (2)

0 %

p/st

31.12.2021

ex 8411 99 00

65

Spiral-shaped gas turbine turbocharger component:

with a heat-resistance of not more than 1 050  °C, and

with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm

0 %

p/st

31.12.2021

ex 8413 30 20

30

Single-cylinder radial-piston high pressure pump for gasoline direct injection with:

an operating pressure of 200 bar or more, but not more than 350 bar,

a flow control, and

a pressure relief valve,

for use in the manufacture of engines of motor vehicles (2)

0 %

31.12.2021

ex 8479 90 70

87

Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles (2)

0 %

p/st

31.12.2021

ex 8481 80 59

20

Pressure regulating valve for incorporation into compressors of motor vehicle air condition units (2)

0 %

p/st

31.12.2021

ex 8484 20 00

10

Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units (2)

0 %

p/st

31.12.2021

ex 8501 10 99

56

DC Motor:

with a speed rotation of not more than 7 000 rpm (without load),

with a nominal voltage of 12 V (± 4 V),

with a maximum power of 13,78 W (at 3,09 A),

with a specified temperature range from – 40 °C to 160 °C,

with a gear connection,

with a mechanical attachment interface,

with 2 electrical connections,

with a maximum torque of 100 Nm

0 %

31.12.2021

ex 8501 10 99

58

DC Motor:

with a speed rotation of not more than 6 500 rpm (without load),

with a nominal voltage of 12 V (± 4 V),

with a maximal power below than 20 W,

with a specified temperature range from – 40 °C to 160 °C,

with a worm gear drive,

with a mechanical attachment interface,

with 2 electrical connections,

with a maximum torque of 75 Nm

0 %

31.12.2021

*ex 8501 10 99

65

Electric turbocharger actuator, with:

a DC motor,

an integrated gear mechanism,

a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,

a (pulling) force of 250 N or more in each position of its stroke,

an effective stroke of 15 mm or more but not more than 25 mm,

with or without an on-board diagnostics interface

0 %

31.12.2020

*ex 8504 31 80

50

Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry (2)

0 %

31.12.2021

*ex 8504 40 90

25

Direct current to direct current converter

without housing or

with housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing

0 %

p/st

31.12.2021

ex 8504 50 95

70

Solenoid coil with:

a rated power of more than 10 W but not more than 15 W,

an insulation resistance of 100 M Ohms or more,

a DC resistance of not more than 34,8 Ohm (± 10 %) at 20 °C,

a rated current of not more than 1,22 A,

a rated voltage of not more than 25 V

0 %

p/st

31.12.2021

*ex 8505 11 00

65

Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having

a length of not more than 140 mm,

a width of not more than 90 mm, and

a thickness of not more than 55 mm,

or in the shape of curved rectangle (tile type) having

a length of not more than 75 mm,

a width of not more than 40 mm,

a thickness of not more than 7 mm, and

a radius of curvature of more than 86 mm but not more than 241 mm

or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre

0 %

p/st

31.12.2018

*ex 8505 11 00

75

A quarter sleeve intended to become permanent magnet after magnetization,

consisting of at least neodymium, iron and boron,

with a width of 9,1 mm or more but not more than 10,5 mm,

with a length of 20 mm or more but not more than 30,1 mm,

of a kind used on rotors for the manufacture of fuel pumps

0 %

p/st

31.12.2019

*ex 8507 90 80

70

Cut plate of nickel-plated copper foil, with:

a width of 70 mm (± 5 mm),

a thickness of 0,4 mm (± 0,2 mm),

a length of not more than 55 mm,

for use in the manufacture of lithium-ion electric rechargeable batteries (2)

0 %

p/st

31.12.2021

ex 8518 40 80

93

Audio power amplifier with:

an output power of 50 W,

an operating voltage of more than 9 V but not more than 16 V,

an electrical impedance of not more than 4 Ohm,

a sensitivity of more than 80 dB

in a metal housing

for use in the manufacture of motor vehicles (2)

0 %

p/st

31.12.2021

*ex 8522 90 80

ex 8529 90 92

30

57

Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (2)

0 %

p/st

31.12.2021

*ex 8529 90 65

ex 8529 90 92

65

53

Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module

0 %

p/st

31.12.2020

*ex 8529 90 92

59

LCD modules with:

a diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,

a LED backlight,

a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network)bus or APIX2 (Automative Pixel Link) driver module and other active and passive components,

6 to 8 pin plug for power supply and 2 to 4- pin LVDS (Low-voltage differential signalling) or APIX2 interface,

whether or not in a housing,

for permanent incorporation or permanent mounting into motor vehicles of Chapter 87 (2)

0 %

p/st

31.12.2020

*ex 8529 90 92

63

LCD module

with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,

with or without a touch screen,

with an LED backlight,

with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,

with a plug for power supply and CAN and LVDS interfaces,

with or without electronic components for dynamic adjustments of colour,

in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,

suitable for installation in motor vehicles of Chapter 87 (2)

0 %

p/st

31.12.2020

*ex 8529 90 92

67

Colour LCD display panel for LCD monitors of heading 8528 :

with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

with or without a touch screen,

with backlight, micro-controller,

with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,

in a housing with or without a heat sink at the back of the housing,

without a signal-processing module,

whether or not with haptic and acoustical feedback,

for use in the manufacture of vehicles of Chapter 87 (2)

0 %

p/st

31.12.2020

*ex 8536 90 95

20

Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1 000 V

0 %

p/st

31.12.2020

*ex 8536 90 95

92

Metallic stamped frame with connections

0 %

p/st

31.12.2018

*ex 8536 90 95

ex 8544 49 93

94

10

Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements

0 %

p/st

31.12.2018

ex 8537 10 98

65

Lever for control module under the steering wheel:

with one or more single or multi-positional electrical switches (push-button, rotary or other),

whether or not equipped with printed circuit boards and electrical cables,

for a voltage of 9 V or more but not more than 16 V,

of a kind used in the manufacture of motor vehicles of Chapter 87

0 %

p/st

31.12.2021

ex 8537 10 98

75

Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:

an antenna,

a connector,

a metal holder,

for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 8537 10 98

92

Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors

0 %

p/st

31.12.2018

ex 8538 90 99

60

Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87

0 %

p/st

31.12.2021

ex 8543 70 90

15

Laminated electrochromic film consisting of:

two outer layers of polyester,

a middle layer of acrylic polymer and silicone, and

two electric connection terminals

0 %

31.12.2021

*ex 8543 70 90

33

High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing

0 %

31.12.2021

ex 8544 42 90

80

12-wire connecting cable containing two connectors

of a voltage of 5 V,

with a length of not more than 300 mm

for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

ex 8708 10 10

ex 8708 10 90

10

10

Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 8708 30 10

ex 8708 30 91

ex 8708 30 99

20

60

10

Motor powered brake actuation unit

with a rating of 13,5 V (± 0,5 V) and

a ball screw mechanism to control brake fluid pressure in the master cylinder

for use in the manufacture of electric motor vehicles (2)

0 %

p/st

31.12.2019

*ex 8708 30 10

ex 8708 30 91

40

30

Body of disc type brake in BIR (‘Ball in Ramp’) or EPB (‘Electronic Parking Brake’) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2019

*ex 8708 30 10

ex 8708 30 91

50

10

Drum type parking brake:

operating within the service brake disk,

with a diameter of 170 mm or more but not more than 195 mm

for use in the manufacture of motor vehicles (2)

0 %

p/st

31.12.2021

*ex 8708 30 10

ex 8708 30 91

60

20

Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2019

*ex 8708 30 10

ex 8708 30 91

70

40

Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

*ex 8708 40 20

ex 8708 40 50

20

10

Automatic hydrodynamic gearbox

with a hydraulic torque converter,

without transfer box and cardan shaft,

whether or not with front differential,

for use in the manufacture of motor vehicles of Chapter 87 (2)

0 %

p/st

31.12.2020

*ex 8708 50 20

ex 8708 50 55

10

10

Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 8703

0 %

p/st

31.12.2020

*ex 8708 50 20

ex 8708 50 99

20

10

Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle

of a length of 1 m or more but not more than 2 m,

of a weight of 6 kg or more but not more than 9 kg

0 %

p/st

31.12.2020

*ex 8708 50 20

ex 8708 50 99

ex 8708 99 10

ex 8708 99 97

30

20

20

70

Single input, dual output gearcase (transmission) in a cast aluminum housing, with overall dimensions of 273 mm (width) × 131 mm (height) × 187 mm (length), comprising at least:

two electro-magnetic one direction clutches, working in opposite sides,

an input shaft with an outer diameter of 24 mm (± 1 mm), ended with 22 teeth spline, and

a coaxial output bushing with an inner diameter of 22 mm (± 1 mm), ended with 22 teeth spline

for use in the manufacture of all-terrain vehicles or utility task vehicles (2)

0 %

31.12.2021

*ex 8708 80 20

ex 8708 80 35

10

10

Upper strut insulator containing

a metal holder with three mounting screws, and

a rubber bump

of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

*ex 8708 80 20

ex 8708 80 91

20

10

Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

*ex 8708 80 20

ex 8708 80 91

30

20

Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

ex 8708 80 99

10

Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 8708 91 20

ex 8708 91 35

20

10

Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2019

*ex 8708 91 20

ex 8708 91 99

30

30

Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:

an insulating area flatness of not more than 0,1 mm,

a permissible particle quantity of 0,3 mg per tank,

a distance between pores of 2 mm or more,

pore sizes of not more than 0,4 mm, and

not more than 3 pores larger than 0,2 mm

of a kind used in heat exchangers for car cooling systems

0 %

p/st

31.12.2020

*ex 8708 94 20

ex 8708 94 35

10

20

Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2019

*ex 8708 95 10

ex 8708 95 99

40

10

Front passenger airbag composed of:

a metal housing with at least six mounting brackets,

an embedded safety cushion,

a cartridge filled with compressed gas

of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

ex 8708 99 10

ex 8708 99 97

30

15

Front radiator holder whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

ex 8708 99 10

ex 8708 99 97

40

25

Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 8714 91 30

ex 8714 91 30

ex 8714 91 30

25

35

72

Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (2)

0 %

31.12.2018

*ex 9013 80 90

20

Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of:

one or more monolithic application-specific integrated circuits (ASIC),

one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

of a kind used for incorporation into products of Chapters 84 to 90 and 95

0 %

p/st

31.12.2019


ANNEX II

CN code

TARIC

ex 2818 30 00

30

ex 2842 10 00

40

ex 2905 11 00

20

ex 2909 60 00

20

ex 2916 14 00

30

ex 2920 90 70

40

ex 2920 90 70

50

ex 2931 90 00

05

ex 2933 59 95

88

ex 2933 99 80

53

ex 2933 99 80

72

ex 2940 00 00

40

ex 3204 16 00

20

ex 3204 17 00

67

ex 3215 90 70

30

ex 3506 91 10

50

ex 3506 91 90

50

ex 3811 21 00

57

ex 3815 90 90

40

ex 3824 99 92

21

ex 3824 99 92

24

ex 3824 99 92

69

ex 3901 10 10

20

ex 3901 90 80

50

ex 3913 90 00

92

ex 3921 13 10

10

ex 3923 10 00

10

ex 3926 30 00

10

ex 3926 90 97

20

ex 5911 90 90

30

ex 5911 90 90

40

ex 7410 11 00

10

ex 7607 11 90

40

ex 7607 19 90

10

ex 7616 99 10

30

ex 8108 90 30

20

ex 8108 90 50

10

ex 8108 90 50

25

ex 8301 60 00

20

ex 8409 91 00

65

ex 8409 99 00

30

ex 8411 99 00

70

ex 8413 91 00

40

ex 8419 90 85

30

ex 8421 99 00

92

ex 8438 90 00

20

ex 8468 90 00

20

ex 8476 90 10

20

ex 8476 90 90

20

ex 8479 90 70

83

ex 8481 90 00

30

ex 8501 10 99

55

ex 8503 00 99

70

ex 8504 31 80

50

ex 8504 40 90

20

ex 8505 11 00

33

ex 8505 11 00

45

ex 8507 90 80

60

ex 8507 90 80

70

ex 8507 90 80

80

ex 8515 90 80

30

ex 8522 90 80

30

ex 8529 90 65

65

ex 8529 90 92

35

ex 8529 90 92

36

ex 8529 90 92

50

ex 8536 90 40

20

ex 8536 90 40

92

ex 8536 90 40

94

ex 8536 90 40

95

ex 8536 90 95

20

ex 8536 90 95

92

ex 8536 90 95

94

ex 8536 90 95

95

ex 8537 10 98

70

ex 8537 10 98

92

ex 8543 70 90

33

ex 8543 90 00

15

ex 8544 49 93

10

ex 8545 90 90

30

ex 8708 29 90

10

ex 8708 30 10

20

ex 8708 30 10

30

ex 8708 30 91

10

ex 8708 30 91

20

ex 8708 30 91

30

ex 8708 30 91

40

ex 8708 30 91

50

ex 8708 40 20

20

ex 8708 40 50

10

ex 8708 50 55

10

ex 8708 50 99

10

ex 8708 50 99

20

ex 8708 80 35

10

ex 8708 80 91

10

ex 8708 80 91

20

ex 8708 91 35

10

ex 8708 91 99

20

ex 8708 91 99

30

ex 8708 94 35

20

ex 8708 95 99

10

ex 8708 99 10

20

ex 8708 99 97

40

ex 8708 99 97

50

ex 8708 99 97

70

ex 8714 91 30

24

ex 8714 91 30

34

ex 8714 91 30

71

ex 9013 80 90

10


Top