(1)

Regulation (EU) 2019/1009 lays down rules on the making available on the market of EU fertilising products. Pursuant to the requirements related to the component material categories (‘CMCs’) 8 and 9 laid down in Part II of Annex II to this Regulation, EU fertilising products may contain certain polymers.

(2)

The ubiquitous presence of tiny fragments of synthetic or chemically modified natural polymers, which are insoluble in water, degrade very slowly and can easily be ingested by living organisms, raises concerns about their general impact on the environment and, potentially, on human health. That is particularly valid for polymers intentionally added to EU fertilising products which are subsequently released to the environment.

(3)

Therefore, Regulation (EU) 2019/1009 set out an obligation for the Commission to assess by 16 July 2024 the biodegradability criteria of two categories of polymers belonging to CMC 9: polymers controlling the water penetration into nutrient particles and thus the release of nutrients (‘coating agents’) and polymers increasing the water retention capacity or wettability of the product (‘water retention polymers’).

(4)

On 23 June 2021, the Commission adopted Delegated Regulation (EU) 2021/1768 (2) adding new categories of polymers in Component Material Categories 1 and 11. Such polymers are normally used as technical additives, to increase the agronomic efficiency or the safety of the products. In order to identify which polymers do not cause any environmental concern and therefore should be included in CMCs 1 and 11, the Commission took into account the scientific opinions issued by the Risk Assessment Committee (3) and the Committee for Socioeconomic Analysis of the European Chemical Agency in accordance with Regulation (EC) No 1907/2006 of the European Parliament and of the Council (4), on intentionally added microplastic particles to consumer or professional use products of any kind. Thus, only natural polymers, which have not been chemically modified, biodegradable polymers or soluble polymers may be used as materials belonging to CMCs 1 or 11.

(5)

Subsequently, the Commission adopted Regulation (EU) 2023/2055 (5) which introduces a general restriction in Regulation (EC) No 1907/2006 of placing on the market of synthetic polymer microparticles (‘the general restriction’). Certain categories of polymers and polymers meeting biodegradability or solubility criteria set out in Regulation (EC) No 1907/2006 are excluded from the general restriction.

(6)

EU fertilising products are excluded from the scope of the general restriction, waiting for the outcome of the assessment on biodegradability criteria for coating agents and water retention polymers. However, the requirements for polymers belonging to CMC 1 typically used as technical additives should be aligned to the requirements for polymers exempted from the general restriction. Firstly, the materials belonging to CMC 1 are already subject to some provisions of Regulation (EC) No 1907/2006, specifically adapted to their use as component materials in EU fertilising products. Secondly, the polymers which may be used as materials belonging to CMC 1, typically technical additives, such as anti-dusting or anti-caking agents, are not fulfilling a specific function during a certain period after their application to soils, like coating agents and water retention polymers, they do not have to slowly degrade and there is no justification to introduce or maintain specific biodegradation rules for them. Thirdly, the general restriction in Regulation (EC) No 1907/2006 applies to similar polymers in national fertilising products, except for coating agents or water retention polymers which are to meet the same criteria as the ones to be laid down in accordance with Regulation (EU) 2019/1009. Aligning the requirements for materials belonging to CMC 1 to those in Regulation (EC) No 1907/2006 is thus needed both to ensure coherence by applying the same rules to similar materials contained in either harmonized or non-harmonised products, and to achieve the objectives pursued by introducing the general restriction in Regulation (EC) No 1907/2006, which could be jeopardized by maintaining more lenient rules in Regulation (EU) 2019/1009.

(7)

Regulation (EU) 2019/1009 should therefore be amended accordingly.

(8)

Regulation (EU) 2023/2055 is to start applying to national fertilising products from 17 October 2028. For coherence reasons and to allow sufficient time to adapt to the requirements introduced by this Regulation, the same transitional period should apply,

(1)

point (f) is replaced by the following:

(2)

the following point (fa) is inserted: