EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 32024R1851

Council Regulation (EU) 2024/1851 of 25 June 2024 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council on certain agricultural and industrial products

ST/10293/2024/INIT

OJ L, 2024/1851, 4.7.2024, ELI: http://data.europa.eu/eli/reg/2024/1851/oj (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

Legal status of the document In force

ELI: http://data.europa.eu/eli/reg/2024/1851/oj

European flag

Official Journal
of the European Union

EN

L series


2024/1851

4.7.2024

COUNCIL REGULATION (EU) 2024/1851

of 25 June 2024

amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council on certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)

In order to ensure a sufficient supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances on the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council (1) (‘CCT duties’) on those products have been suspended by Council Regulation (EU) 2021/2278 (2). As a result, the products listed in the Annex to Regulation (EU) 2021/2278 can be imported into the Union at reduced or zero duty rates without any limitation as regards their quantity.

(2)

The Union production of certain products that are not listed in the Annex to Regulation (EU) 2021/2278 is inadequate to meet the specific requirements of the user industries in the Union. As it is in the Union's interest to ensure an adequate supply of certain products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to grant a complete suspension of the CCT duties also on those products.

(3)

With a view to promoting integrated battery production in the Union, a partial suspension of the CCT duties should be granted in respect of certain products related to battery production that are currently not listed in the Annex to Regulation (EU) 2021/2278, and the respective Union production of which is inadequate to meet the specific requirements of the user industries in the Union. The date for the mandatory review of those suspensions should be 31 December 2024, in order for that review to take into account the short-term evolution of the battery production sector in the Union.

(4)

It is necessary to amend the product description, classification, supplementary unit, or end-use requirement for certain CCT duty suspensions listed in the Annex to Regulation (EU) 2021/2278 in order to take into account technical product developments and economic trends in the market.

(5)

It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) 2021/2278. The suspensions for those products should therefore be deleted with effect from 1 July 2024.

(6)

Regulation (EU) 2021/2278 should therefore be amended accordingly.

(7)

In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 July 2024. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) 2021/2278 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 July 2024.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Luxembourg, 25 June 2024.

For the Council

The President

H. LAHBIB


(1)  Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1, ELI: http://data.europa.eu/eli/reg/2013/952/oj).

(2)  Council Regulation (EU) 2021/2278 of 20 December 2021 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products, and repealing Regulation (EU) No 1387/2013 (OJ L 466, 29.12.2021, p. 1, ELI: http://data.europa.eu/eli/reg/2021/2278/oj).


ANNEX

The Annex to Regulation (EU) 2021/2278 is amended as follows:

(1)

the entries with the following serial numbers are deleted: 0.2543, 0.2930, 0.2932, 0.2990, 0.3534, 0.3559, 0.3564, 0.3577, 0.3580, 0.3611, 0.3618, 0.4644, 0.4645, 0.4757, 0.5263, 0.5818, 0.5920, 0.6109, 0.6241, 0.6242, 0.6244, 0.6259, 0.6263, 0.6347, 0.6370, 0.6476, 0.6563, 0.6564, 0.6634, 0.6769, 0.6774, 0.6857, 0.6874, 0.6893, 0.6934, 0.7121, 0.7259, 0.7456, 0.7598, 0.7649, 0.7704, 0.7788, 0.7975, 0.7994, 0.8176, 0.8178, 0.8462;

(2)

the following entries replace those entries that have the same serial numbers:

Serial Number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date envisaged for mandatory review

‘0.4080

ex 1517 90 99

10

Vegetable and/or microbial oil, refined, containing by weight;

25 % or more but not more than 70 % arachidonic acid, or

12 % or more but not more than 65 % docosahexaenoic acid, and

Whether or not:

standardized with high oleic sunflower oil (HOSO),

containing by weight 0,005  % or more, but not more than 0,1  % of antioxidants

0 %

31.12.2026

0.5110

ex 2818 10 91

20

Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:

92 % or more, but less than 98,5  % of aluminium oxide,

2 % (±1,5  %) of magnesium oxide,

1 % (±0,6  %) of yttrium oxide, and

either 3 % (±2,2  %) of lanthanum oxide or

2 % (±1,2  %) of lanthanum oxide and neodymium oxide,

with less than 50 % of the total weight having a particle size of more than 10 mm

0 %

31.12.2025

0.8073

ex 2912 19 00

20

Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more for the production of perfume or pharmaceutical intermediaries (1)

0 %

31.12.2025

0.8527

ex 2933 39 99

63

1-Methyl-4-piperidone (CAS RN 1445-73-4) with a purity by weight of 97 % or more

0 %

31.12.2028

0.5131

ex 2933 69 80

55

Terbutryn (ISO) (CAS RN 886-50-0) for use as a raw material for the production of technical preservatives, in other sectors than for pesticides (1)

0 %

31.12.2025

0.8354

ex 2933 79 00

23

(S)-2-Amino-3-[(S)-2-oxopyrrolidin-3-yl]propanamide hydrochloride (CAS RN 2628280-48-6) with a purity by weight of 95 % or more

0 %

31.12.2027

0.8359

ex 2933 99 80

64

(1R,2S,5S)-3-[(S)-3,3-dimethyl-2-(2,2,2-trifluoroacetamido)butanoyl]-6,6-dimethyl-3-azabicyclo[3.1.0]hexane-2-carboxylic acid (CAS RN 2755812-45-2) with a purity by weight of 95 % or more

0 %

31.12.2027

0.7318

ex 3603 50 00

10

Igniters for gas generators with:

an overall maximum length of 15,5  mm or more but not more than 29,4  mm, and

a pin length of 6,4  mm or more but not more than 12,6  mm

0 %

31.12.2028

0.5727

ex 3811 21 00

29

Additive containing by weight:

25 % or more but not more than 40 % of calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),

30 % or more but not more than 65 % of mineral oils,

for use in the manufacture of blends of additives for lubricating oils (1)

0 %

31.12.2027

0.6435

ex 3811 21 00

48

Additives containing:

overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and

by weight more than 25 % but not more than 50 % of mineral oils,

having a total base number of more than 350, but not more than 450,

for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils (1)

0 %

31.12.2024

0.8366

ex 3812 39 90

85

Light stabilizer, reaction product of stearic acid methyl ester with 1-(2-hydroxy-2-methylpropoxy)-2,2,6,6-tetramethyl-4-piperidinol (CAS RN 300711-92-6) with a purity of less than 90 % by weight

0 %

31.12.2027

0.4520

ex 3920 62 19

32

Transparent poly(ethylene terephthalate) film:

having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 μm or more but not more than 80 μm, whether coated with an acrylic-based organic material or not,

with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin,

with a light transmittance of more than 70 %,

with a haze value of not more than 1,3  %,

with a total thickness of 10 μm or more but not more than 350 μm,

with a width of 800 mm or more but not more than 1 600  mm

0 %

31.12.2028

0.8291

ex 3921 90 55

70

Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene terephthalate support layer with:

a total thickness of 0,25  mm or more but not more than 0,40  mm,

a total weight of 109 g/m2 or more but not more than 114 g/m2

0 %

m2

31.12.2026

0.8372

ex 4411 12 92

10

Fibreboard:

with a thickness of 2,20  mm or more but not more than 2,80  mm,

with a density of 0,95  g/cm3 or more,

lacquered or coated with melamine foil on both sides, and

with dimensions of 1 300  mm x 1 100  mm or less

0 %

31.12.2027

0.8123

ex 8479 89 97

28

Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with:

electronic brake assistants,

hydraulic unit driven by brushless electric motor,

brake fluid reservoir,

for use in the manufacture of hybrid passenger cars (1)

0 %

31.12.2025

0.5577

ex 8501 31 00

50

DC motors, brushless, with:

an external diameter of 80 mm or more, but not more than 200 mm,

a supply voltage of 4V or more, but not more than 16 V,

an output at 20 oC of 200 W or more, but not more than 750 W,

a torque at 20 oC of 2,00 Nm or more, but not more than 7,00 Nm,

a rated speed at 20 oC of 600 rpm or more, but not more than 3 100 rpm,

with or without a pulley,

with or without an electronic power steering sensor/controller

0 %

31.12.2027

0.5978

ex 8501 31 00

ex 8501 32 00

55

40

DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:

an external diameter of 24,2  mm or more, but not more than 140 mm,

a rated speed of 3 300 rpm or more, but not more than 26 200 rpm,

a rated supply voltage of 3,6  V or more, but not more than 230 V,

an output power of more than 37,5  W, but not more than 2 400  W,

a free load current of not more than 20,1  A,

a maximum efficiency of 50 % or more

0 %

31.12.2024

0.4731

ex 8501 31 00

58

Permanently excited DC motor with:

an external diameter of 27 mm or more but not more than 90 mm, including mounting flange,

a rated speed of not more than 25 000 rpm,

an output of 45 W or more but not more than 400 W, and

a supply voltage of 9 V or more but not more than 50 V,

whether or not a multiple-phase winding,

whether or not with a drive disc,

whether or not with a crankcase,

whether or not with a fan,

0 % (1)

31.12.2024

 

 

 

whether or not with a cap assembly,

whether or not with a sun gear,

whether or not with a speed and rotational direction encoder,

whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,

whether or not with a mounting flange

for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture (1)

 

 

 

0.7029

ex 8505 11 10

20

Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid,

whether or not arched,

whether or not with rounded corners or oblique sides,

whether or not colour marked

whether or not coated or passivated with a surface treatment,

whether or not consisting of segments bonded together and electrically insulated from one another

with:

a length of 9 mm or more, but not more than 105 mm,

a width of 5 mm or more, but not more than 105 mm,

a thickness of 2 mm or more, but not more than 55 mm

intended to become permanent magnet after magnetisation

0 %

31.12.2026

0.5584

ex 8505 11 10

23

Bars in the form of arched rectangles, containing alloy containing neodymium, with:

a length of 15 mm or more but not more than 52 mm,

a width of 5 mm or more but not more than 42 mm,

whether or not coated or passivated with a surface treatment,

intended to become permanent magnets after magnetisation

0 %

p/st

31.12.2027

0.7567

ex 8505 11 10

25

Permanent magnets, of an alloy of neodymium, cylindrical shaped:

with a notch,

with an internal threaded bore on one side,

with a length of 97,5  mm or more, but not more than 225 mm,

with a diameter of 19 mm or more, but not more than 25 mm,

whether or not coated or passivated with a surface treatment

0 %

31.12.2024

0.5585

ex 8505 11 10

28

Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars:

with an external diameter of not more than 45 mm,

with a height of not more than 45 mm,

whether or not coated or passivated with a surface treatment,

intended to become permanent magnets after magnetisation

0 %

p/st

31.12.2027

0.3740

ex 8505 11 10

30

Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with:

a rectangular or a trapezoidal cross-section,

a length of not more than 140 mm,

a width of not more than 90 mm and

a thickness of not more than 55 mm,

or in the shape of an arched rectangle with:

a length of not more than 75 mm,

a width of not more than 40 mm,

a thickness of not more than 7 mm and

a radius of curvature of more than 86 mm but not more than 241 mm,

layers of nickel and copper

or in the shape of a disc with:

a diameter of not more than 90 mm,

whether or not a hole in the centre

0 %

p/st

31.12.2024

0.5948

ex 8505 11 10

35

Article of an alloy of neodymium, in the shape of a disc, with:

a diameter of not more than 90 mm,

whether or not a hole in the centre,

layers of copper, nickel and/or zinc,

intended to become permanent magnets after magnetisation

0 %

31.12.2024

0.7789

ex 8505 19 10

20

Permanent magnet of agglomerated ferrite, in the shape of arched rectangles, whether or not coated or passivated with a surface treatment, with:

a length of 16,8  mm or more, but not more than 110,2  mm,

a width of 14,8  mm or more, but not more than 75,2  mm,

a thickness of 4,8  mm or more, but not more than 13,2  mm,

for use in the manufacture of electromotor rotors (1)

0 %

31.12.2024

0.5937

ex 8505 19 90

30

Articles of agglomerated ferrite in the shape of a disc, whether or not coated or passivated with a surface treatment, with:

a diameter of not more than 120 mm,

a hole in the centre,

intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT

0 %

31.12.2024

0.7299

ex 8505 19 90

45

Article of agglomerated ferrite in the shape of a rectangle, whether or not with oblique sides, with:

a length of 26,85  mm or more but not more than 32,15  mm,

a width of 7,6  mm or more but not more than 9,55  mm,

a thickness of 5,3  mm or more but not more than 5,8  mm, and

a weight of 6,1  g or more but not more than 8,3  g,

intended to become a permanent magnet after magnetisation

0 %

p/st

31.12.2027

0.7511

ex 8505 19 90

60

Articles of agglomerated ferrite in the shape of arched rectangles,

whether or not coated or passivated with a surface treatment,

whether or not with rounded corners,

with:

a length of 9 mm or more but not more than 101 mm,

a width of 9 mm or more but not more than 101 mm,

a thickness of 1,85  mm or more but not more than 15,15  mm,

intended to become permanent magnets after magnetisation

0 %

31.12.2024

0.7663

ex 8507 60 00

18

Lithium-ion polymer accumulator pack equipped with a battery management system and can-bus interface with:

6 modules with 90 cells or more but not more than 192 cells,

a nominal voltage of 280 V or more but not more than 400 V,

a nominal capacity of 9,7 Ah or more but not more than 120 Ah,

a charging voltage of 110 V or more but not more than 495 V, and

in a metal casing with:

a length of not more than 1 723  mm,

a width of not more than 1 162,23  mm,

a height of not more than 395 mm,

for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703 (1)

1,3  %

31.12.2024

0.8368

ex 8507 60 00

29

Lithium-ion rechargeable battery pack in a specific housing, suitable for use in digital still cameras, having:

a length of 50 mm or more, but not more than 120 mm,

a width of 35 mm or more, but not more than 80 mm,

a height of 15 mm or more, but not more than 45 mm,

a weight of 0,040  kg or more but not more than 0,085  kg; and

a capacity of not more than 2 200  mAh

1,3  %

31.12.2024

0.5548

ex 8507 60 00

38

Modules for the assembly of lithium-ion battery packs, with:

a length of 298 mm or more, but not more than 500 mm,

a width of 33,5  mm or more, but not more than 209 mm,

a height of 75 mm or more, but not more than 228 mm,

a weight of 3,6  kg or more, but not more than 17 kg,

a power of 458 Wh or more, but not more than 3 510 Wh, and

a voltage of less than 45 V or more than 70 V

1,3  %

31.12.2024

0.8275

ex 8507 60 00

83

Modules for the assembly of ion lithium electric accumulators with:

a length of 570 mm or more, but not more than 610 mm,

a width of 210 mm or more, but not more than 240 mm,

a height of 100 mm or more, but not more than 120 mm,

a weight of 28 kg or more, but not more than 35 kg, and

a capacity of not more than 2 500 Ah and a nominal energy of less than 8,4  kW,

for use in the manufacture of vehicles of subheadings 8703 60 , 8703 70 , 8703 80 and 8704 60  (1)

1,3  %

31.12.2024

0.8419

ex 8507 90 80

55

Top cap or housing made of aluminium or ferrous alloy or stainless steel:

whether or not including parts made of aluminum and aluminum alloy,

with or without sealing elements or other elements made of polymer material,

with or without a “current interrupt device” and an “evacuation valve”

with or without plastic sockets

with an outer diameter of 17 mm or more, but not more than 18 mm,

or rectangular with:

length not greater than 450 mm,

width not greater than 200 mm, and

hight not greater than 150 mm,

for use in the manufacture of lithium-ion batteries (1)

1,3  %

31.12.2024

0.8507

ex 8714 99 90

50

Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the manufacture of bicycles, including electrical bicycles (1)

0 %

p/st

31.12.2027

(3)

the following entries are inserted according to the numerical order of the CN and TARIC codes in the second and third columns:

Serial Number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date envisaged for mandatory review

‘0.8619

ex 2905 39 95

25

Pinacol (CAS RN 76-09-5) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8604

ex 2912 29 00

65

Terephthalaldehyde (CAS RN 623-27-8) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8623

ex 2918 99 90

58

2,4-D (ISO) (CAS RN 94-75-7) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8641

ex 2920 90 10

23

1,3,2-Dioxathiolane 2,2-dioxide (CAS RN 1072-53-3) with a purity by weight of 99 %, or more

3,2  %

31.12.2028

0.8621

ex 2924 29 70

34

Acetic acid—tert-butyl [(1-aminocyclohexyl)methyl]carbamate (1/1) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8611

ex 2929 90 00

60

(2S)-2-[[2-[2-[2-[2-[2-[2-[2-[2-[2-[2-(2-Azidoethoxy)ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethylamino]-2-oxoethoxy]acetyl]amino]-N-[4-(hydroxymethyl)phenyl]-6-[[(4-methoxyphenyl)-diphenylmethyl]amino]hexanamide (CAS RN 1224601-12-0) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8640

ex 2931 90 00

43

Trimethylindium (CAS RN 3385-78-2) with a purity by weight of 99 % or more

0 %

31.12.2028

0.8649

ex 2931 90 00

48

4-Phenoxybenzeneboronic acid (CAS RN 51067-38-0) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8652

ex 2931 90 00

58

Trimethylgallium (CAS RN 1445-79-0) with a purity by weight of 99 % or more

0 %

31.12.2028

0.8615

ex 2932 19 00

15

2-Methylfuran (CAS RN 534-22-5) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8636

ex 2932 19 00

25

Methyl tetrahydro-2-furancarboxylate (CAS RN 37443-42-8) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8605

ex 2932 19 00

35

(2S,3S,4S,5R)-3-(3,4-Difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl)tetrahydrofuran-2-yl-4-nitrobenzoate (CAS RN 2875066-49-0) with a purity by weight of 97 % or more

0 %

31.12.2028

0.8603

ex 2933 19 90

58

1H-Pyrazole (CAS RN 288-13-1) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8613

ex 2933 19 90

68

1-Methyl-1H-pyrazol-4-amine hydrochloride (CAS RN 127107-23-7) with a purity by weight of 95 % or more

0 %

31.12.2028

0.8639

ex 2933 29 90

43

2-Octyl-4,5-dihydro-1H-imidazole (CAS RN 10443-60-4) with a purity by weight of 95 % or more

0 %

31.12.2028

0.8637

ex 2933 39 99

53

5-Methyl-2-pyridylamine (CAS RN 1603-41-4) with a purity by weight of 99 % or more

0 %

31.12.2028

0.8618

ex 2933 39 99

56

2-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)pyridin-2-yl]methyl]sulfanyl]1H-benzimidazole (CAS RN 103577-40-8) with a purity by weight of 99 % or more

0 %

31.12.2028

0.8624

ex 2933 39 99

58

Tert-butyl N-[5-(trifluoromethyl)pyridin-3-yl]carbamate (CAS RN 1187055-61-3) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8656

ex 2933 39 99

66

(2S,4S)-4-Ethoxy-2-[4-(methoxycarbonyl)phenyl]piperidin-1-ium(2Z)-3-carboxyprop-2-enoate (CAS RN 2408761-21-5) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8612

ex 2933 59 95

51

(1R,5S)-8-Benzyl-3,8-diazabicyclo[3.2.1]octane; 4-(4-hydroxyphenyl)phenol (2:1) (CAS RN 2642049-87-2) with a purity by weight of 95 % or more

0 %

31.12.2028

0.8602

ex 2933 59 95

54

2-Chloro-4-methylpyrimidine (CAS RN 13036-57-2) with a purity by weight of 99 % or more

0 %

31.12.2028

0.8643

ex 2933 99 80

35

2-[6-Methyl-2-(4-methylphenyl)imidazo[1,2-a]pyridin-3-yl]acetic acid (CAS RN 189005-44-5) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8642

ex 2934 99 90

38

2-Chloro-9H-thioxanthen-9-one (CAS RN 86-39-5) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8601

ex 2934 99 90

50

Vutrisiran (INN) (CAS RN 1867157-35-4) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8606

ex 2935 90 90

41

Lenacapavir sodium (INNM) (CAS RN 2283356-12-5) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8635

ex 2940 00 00

70

Alpha-D-Mannopyranose, 6-acetate 2,3,4-tribenzoate 1-(2,2,2-trichloroethanimidate) (CAS RN 346441-49-4) with a purity by weight of 95 % or more

0 %

31.12.2028

0.8614

ex 2942 00 00

20

Dimethylamine—borane (1:1) (CAS RN 74-94-2) with a purity by weight of 98 % or more

0 %

31.12.2028

0.8678

ex 3204 17 00

28

Colourant C.I. Pigment Yellow 12 (CAS RN 6358–85-6) and preparations based thereon with a colourant C.I. Pigment Yellow 12 content of 21 % or more by weight

0 %

31.12.2028

0.8676

ex 3207 30 00

30

Silver paste, containing by weight:

45 % or more, but not more than 90 % silver (CAS RN 7440-22-4) and

59 % or more, but not more than 92 % of the total solids (including silver)

for use as conductor in the production of solar cells (2)

0 % (2)

31.12.2028

0.8630

ex 3207 30 00

40

Aluminium paste, containing by weight:

72 % or more but not more than 82 % aluminium (CAS RN 7429-90-5)

with a viscosity of 10 or more, but not more than 100 Pa.s (Brookfield RVT, 14 Spindle, 20 rpm, 25 oC±0,5  oC)

with an aluminium particle size of not more than 25 μm

for use in the production of solar cells (2)

0 %

31.12.2028

0.8655

ex 3811 29 00

23

Additive for lubricating oils consisting of molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized (CAS RN 68412-26-0)

0 %

31.12.2028

0.8644

ex 3824 99 92

71

Mixture containing by weight:

49 % or more but not more than 51 % of ethylene carbonate (CAS RN 96-49-1), and

49 % or more but not more than 51 % of 1,3-propanesultone (CAS RN 1120-71-4)

3,2  %

31.12.2028

0.8670

ex 3910 00 00

85

Two-component silicone, with a viscosity of the mixture of 3 000 cps or more, but not more than 6 000 cps (according to standard GB/T 2794) for use as an electrical insulation material in solar panels junction box in the production of solar panels (2)

0 %

31.12.2028

0.8667

ex 3919 10 80

ex 3919 90 80

78

48

Polytetrafluoroethylene film,

with a thickness of 50 μm or more,

with a width of 6,30  mm or more but not more than 740 mm,

an elongation at break of not more than 200 %, and

coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 μm

0 %

31.12.2028

0.8629

ex 3919 90 80

55

Black polyvinyl chloride film:

with a gloss of more than 25 degrees according to ASTM D 2457,

whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner

for use in the manufacture of die-cut films for interior and exterior surfaces of cars (2)

0 %

31.12.2028

0.8664

ex 3926 90 97

22

Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with:

a density of 20 kg/m3 or more, but not more than 40 kg/m3,

a tensile strength of not less than 170 kPa,

water absorption coefficient of not greater than 1 %,

a length of 5 mm or more but not more than 300 mm,

a height of 10 mm or more but not more than 400 mm,

a depth of 5 mm or more but not more than 250 mm

0 %

31.12.2028

0.8646

ex 4016 99 52

10

Hanger of the exhaust muffler consisting of:

a steel bracket with at least one mounting hole and

silent block,

for use in the manufacture of goods of Chapter 87 (2)

0 %

31.12.2028

0.8666

ex 6804 21 00

30

Steel wire used for cropping and squaring semiconductors:

covered with diamond grains of 5 μm or more but not more than 55 μm,

with a wire diameter of 45 μm or more, but not more than 350 μm

a breaking strength of 11 N or more but not more than 170 N

0 %

31.12.2028

0.8663

ex 7009 91 00

10

Chrome-plated glass mirror with:

a length of 155 mm or more, but not more than 158 mm,

a height of 115 mm or more, but not more than 120 mm,

a blind spot sensor with a blind spot motion detection light module, with an edge luminescence greater than or equal to 5 000 cd/m2 and a central luminescence greater than or equal to 7 000 cd/m2,

a heater foil, with a resistance of 1,1  kΩ or more, but not more than 1,35 kΩ,

designed to be mounted in a housing as an exterior vehicle mirror, for use in the manufacture of car mirrors (2)

0 %

31.12.2028

0.8682

ex 7009 91 00

20

Aspherical, convex or flat chrome-plated glass, ready for framing:

with a length of 140 mm or more but not more than 215 mm,

with a height of 104 mm or more but not more than 138 mm,

with curvature radius of 0 mm or more but not more than 1 330  mm,

with a reflectance of more than 40 %,

for the manufacture of automotive mirrors (2)

0 %

31.12.2028

0.8616

ex 7019 90 00

50

Insulating rigid panels made by vacuum compression of glass fibres wrapped in protective gas-tight film, for use in the manufacture of refrigerators and freezers and their combinations (2)

0 %

31.12.2028

0.8668

ex 8402 90 00

10

Pre-assembled process module unit of an ethane cracker unit, containing:

a dilution steam generator system which produces steam from pretreated quench water for use as dilution steam in steam cracking furnaces,

a condensate system that collects, filters and deaerates steam condensates, which are subsequently recycled as boiler feed water and further distributed within the cracker unit, and

a flare system that collects, separates and vaporizes non-recyclable hydrocarbon containing releases from different equipment in a steam cracker, and transfers those towards flares

0 %

30.06.2025

0.8610

ex 8409 91 00

28

Carburetor with:

2 mounting holes with a diameter of 31 mm,

a choke bore diameter of 18 mm or more, but not more than 19,05  mm

for use in the manufacture of a two-stroke engine grass trimmer (2)

0 %

31.12.2028

0.8651

ex 8414 59 25

50

Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air with

a direct current operating voltage of more than 10 V but not more than 14 V, or

an alternating current operating voltage of more than 185 V, but not more than 254 V,

an operating temperature of - 40 oC or higher, but not higher than 70 oC,

for use in the manufacture of heat pump tumble dryers and refrigerators or freezers (2)

0 %

31.12.2028

0.8648

ex 8414 59 35

40

Electric blower for cooling the battery module:

with an operating voltage of 9 VDC or more but not more than 16 VDC,

with a centrifugal electric fan,

with a connector,

with a plastic case,

with or without a control unit for the fan electric motor,

for use in the production of rechargeable batteries for hybrid and electric vehicles (2)

0 %

31.12.2028

0.8679

ex 8417 80 50

10

Pre-assembled process module unit of an ethane cracker unit, exceeding 29 meters in length, 35 meters in width and 66 meters in height and 5 500 metric ton in weight, containing two steam-cracking non-electric furnaces for de-hydrogenation as a part of an ethane cracker plant consisting of a radiation section and a convection section to produce ethylene and propylene from ethane

0 %

30.06.2025

0.8669

ex 8419 40 00

10

Pre-assembled process module unit of an ethane cracker unit, containing:

quench water circulation loops, which contain a heat exchanger and circulation pumps to cool and recirculate quench water,

a water purification system, which removes hydrocarbon contaminants from quench water which is then re-used for dilution steam production (outside the module),

a pyrolysis oil purification system, which separates pyrolysis gasoline, heavy oil and coke fractions from the hydrocarbon contaminants that have been removed from the quench water,

an ethane feedstock start-up vaporizer and superheater, which vaporizes and heats ethane feedstock before sending the ethane to the cracking furnaces (outside the module),

0 %

30.06.2025

 

 

 

a propane feedstock preparation system, which filters, vaporizes and superheats propane feedstock, before sending the propane to cracking furnaces (outside the module), and

a chemical grade propylene preparation system, which filters and dries chemical grade propylene before sending it to the deethanizer (outside the module)

 

 

 

0.8680

ex 8419 50 80

20

Pre-assembled process module unit of an ethane cracker unit, containing:

an open loop ethylene refrigeration system, which is to be integrated with an external ethylene refrigerant compressor,

pumps and a heat exchanger to deliver ethylene to an external pipeline, and

a closed loop propylene refrigeration system, which is to be integrated with an external propylene refrigerant compressor

0 %

30.06.2025

0.8675

ex 8419 89 98

10

Pre-assembled process module unit of an ethane cracker unit, containing:

equipment associated with an external multi-stage, centrifugal cracked gas compressor which compresses hydrocarbon gases to allow further processing downstream in interconnected equipment containing:

coolers,

vapor-liquid separation drums, and

pumps needed to condense and remove water and heavier hydrocarbons and to avoid undesirable formation of polymer by-products,

0 %

30.06.2025

 

 

 

equipment associated with an external caustic wash tower containing:

caustic water circulation pumps to support an external caustic wash tower in removing acid gasses (carbon dioxide and hydrogen sulphide) from the cracked gas,

a spent caustic pre-treatment system, containing separation drums, pumps and mixers,

a heat exchanger for the pre-cooling of cracked gas, and

a separation drum for the removal of water from cracker gas

 

 

 

0.8632

ex 8467 99 00

10

Pole hedge trimmer cutting elements:

in the form of hedge trimmer attachment,

with a knife length of 60 cm and teeth opening of 30 mm,

with angle adjustment of the blade,

with integrated single stage gearbox,

with a magnesium cast body,

for use in the manufacture of garden machinery and power tools (2)

0 %

31.12.2028

0.8673

ex 8479 89 97

33

Pre-assembled process module unit of an ethane cracker unit, containing:

various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums,

a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream,

a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit),

associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, and

a vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers

0 %

30.06.2025

0.8681

ex 8479 89 97

43

Pre-assembled process module unit of an ethane cracker unit, containing:

a system for filtering and cooling of dried cracked gas,

a deethanizer distillation column and associated equipment for C2-/C3+ separation,

an acetylene hydrogenation system to remove acetylene within a C2 stream,

a fuel gas drum that stores fuel gas for cracker furnaces, and

a system to regenerate dryers in a cracker installation

0 %

30.06.2025

0.8626

ex 8483 40 23

20

Bevel gear:

made of lightweight alloys and steel,

built on straight or helical bevel gears,

with an angle between the shafts of 30 degrees or more but not more than 90 degrees

with a gear 1:1,3 ratio or more but not more than 1:1,46 ,

for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery (2)

0 %

31.12.2028

0.8625

ex 8483 40 23

30

Bevel gear:

made of lightweight alloys and steel,

built on straight bevel gears,

with an angle between the shafts of 24 degrees or more but not more than 35 degrees,

for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery (2)

0 %

31.12.2028

0.8609

ex 8501 31 00

48

Brushless DC electric motors:

with a rated power of 240 W or more, but not more than 260 W,

with a voltage of 36 V or higher, but not higher than 52 V

with a torque of 20 Nm or more, but not more than 140 Nm,

with a housing made of aluminum, aluminum alloy or plastic,

with or without a built-in controller,

with a communication function in the LIN or UART interface,

weighing 1,5  kg or more, but not more than 5,0  kg,

adapted for mounting in a bicycle frame

for use in the manufacture of e-bikes (2)

0 %

31.12.2028

0.8608

ex 8501 31 00

49

Brushless DC electric motors:

with a rated power of 240 W or more, but not more than 260 W,

with voltage of 36 V or higher, but not higher than 52 V,

with torque of 30 Nm or more, but not more than 50 Nm,

with communication function UART or CAN interface,

with internal planetary gearbox with fixed or variable ratio,

made by CNC machined casting,

with housing made of aluminum,

weighing 2,3  kg or more, but not more than 4,4  kg,

adapted for mounting in the front or rear bicycle wheel (2)

0 %

31.12.2028

0.8662

ex 8503 00 99

53

Pressure casted rotor cover of the cooling channel system in the electrical motor:

of EN AC-47100-F aluminum,

with a sealing cap of stainless steel,

shot-blasted and machined,

leakproof to the degree of 1 ml per minute or less under 2,75 bar pressure,

with a hardness of 70 HBW or more (2,5 /62,5 , according to ISO 6506),

with a tensile strength of 240 N/mm2 or more,

with a height of 50 mm or more, but not more than 55 mm,

with a diameter of 109 mm or more, but not more than 112 mm,

with a weight of 3,9  kg or more but not more than 4,2  kg

0 %

31.12.2028

0.8658

ex 8503 00 99

58

Pressure casted inner housing of a cooling channel system for an electrical motor:

of EN AC-47100 aluminum,

shot-blasted and machined,

leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,

with a hardness of 70 HBW or more (2,5 /62,5 , according to ISO 6506)

with a tensile strength of 240 N/mm2 or more,

with a height of 225 mm or more, but not more than 280 mm,

with a diameter of 300 mm or more, but not more than 310 mm,

with a weight of 3,8  kg or more, but not more than 4,9  kg

0 %

31.12.2028

0.8659

ex 8503 00 99

63

Pressure casted outer housing of an electrical motor:

of EN AC-47100 aluminum,

with overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,

shot-blasted and machined,

a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,

with a hardness of 70 HBW or more (2,5 /62,5 , according to ISO 6506)

with a tensile strength of 240 N/mm2 or more,

with a height of 245 mm or more, but not more than 360 mm,

with a width of 360 mm or more, but not more than 525 mm,

with a length of 345 mm or more, but not more than 450 mm,

with a weight of 6,4  kg or more, but not more than 8,3  kg

0 %

31.12.2028

0.8627

ex 8505 20 00

40

Electromagnetic clutch:

transmitting torque from the motor shaft to the cutting device pulley,

containing field coil, rotor, hub and armature,

with an operating voltage of 12 V

a current of 3,93  A current or more but not more than 6,86  A,

a resistance of 1,84  ohm or more but not more than 3,05  ohm (operating at 20 oC),

a static torque of 108 Nm or more but not more than 305 Nm

for use in the manufacture of rider type self-propelled mowers (2)

0 %

31.12.2028

0.8660

ex 8507 60 00

26

Modules for the assembly of electric accumulators using lithium ferrophosphate technology (LFP) with:

a length of 820 mm or more, but not more than 882 mm,

a width of 390 mm or more, but not more than 655 mm,

a height of 110 mm or more, but not more than 137 mm,

a weight of 60 kg or more, but not more than 165 kg, and

a power of 11 300 Wh or more, but not more than 29 360  Wh

1,3  %

31.12.2028

0.8645

ex 8507 60 00

28

Lithium-ion rechargeable battery cell with:

a length of 190 mm or more but not more than 380 mm,

a width of 90 mm or more but not more than 150 mm,

a height of 4 mm or more but not more than 15 mm,

a weight of 0,1  kg or more but not more than 1,2  kg,

a nominal voltage of 3,0 VDC or more but not more than 4,0 VDC,

a nominal capacity of not more than 90 Ah,

for use in the manufacture of rechargeable hybrid and electric vehicle batteries (2)

1,3  %

31.12.2028

0.8654

ex 8507 60 00

36

Lithium-ion accumulator, with

multiple connected lithium-ion accumulator cells,

charging and monitoring electronics,

a power of 74 Wh or more, but not more than 75 Wh,

in a plastic housing with electrical connection contacts and LCD display,

for use in the manufacture of cordless vacuum cleaners or rechargeable power sources therefor (2)

1,3  %

31.12.2028

0.8628

ex 8511 80 00

30

Ignition module:

made with plastics and non-ferrous metals,

with the electric components cast in epoxy resin,

to generate the ignition energy and to electronically control the ignition timing,

to connect spark plug and circuit breaker,

for use in the manufacture of two-stroke engines (2)

0 %

31.12.2028

0.8633

ex 8512 20 00

25

An electrical component with an integrated LED, in an ABS housing, with:

a voltage of 11 V or more, but not more than 15 V,

a circular shape,

2 terminals,

an outer diameter of the housing of 42,3  mm,

a diode voltage of 42 V or more, but not more than 48 V and

a current of 55 mA or more, but not more than 65 mA

0 %

31.12.2028

0.8647

ex 8544 30 00

75

Wiring harness to connect the integrated battery system with the car’s control systems, containing:

an input waterproof connector,

four or more output connectors,

two or more plastic clips for attachment

for use in the production of rechargeable batteries for hybrid and electric vehicles (2)

0 %

31.12.2028


(1)  Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’;

(2)  Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’.


ELI: http://data.europa.eu/eli/reg/2024/1851/oj

ISSN 1977-0677 (electronic edition)


Top