L:2017:164:FULL

EUR-Lex

Access to European Union law

This document is an excerpt from the EUR-Lex website

EUROPA
EUR-Lex home
EUR-Lex - L:2017:164:FULL - EN

Help

Search tips

Need more search options? Use the Advanced search

Document L:2017:164:FULL

Official Journal of the European Union, L 164, 27 June 2017

Display all documents published in this Official Journal

HTML

PDF

e-signature

How to verify the authenticity of the Official Journal

		ISSN 1977-0677
Official Journal of the European Union		L 164

English edition	Legislation	Volume 60 27 June 2017

Contents		II Non-legislative acts	page
		REGULATIONS
	*	Council Regulation (EU) 2017/1133 of 20 June 2017 amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products	1
	*	Council Regulation (EU) 2017/1134 of 20 June 2017 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products	6
	*	Commission Regulation (EU) 2017/1135 of 23 June 2017 amending Annexes II and III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for dimethoate and omethoate in or on certain products ( 1 )	28
	*	Commission Implementing Regulation (EU) 2017/1136 of 14 June 2017 approving non-minor amendments to the specification for a name entered in the register of protected designations of origin and protected geographical indications (Emmental de Savoie (PGI))	52
		Commission Implementing Regulation (EU) 2017/1137 of 26 June 2017 establishing the allocation coefficient to be applied to the quantities covered by import rights applications lodged from 1 July 2017 to 30 June 2018 under the tariff quota opened by Regulation (EC) No 431/2008 for frozen meat of bovine animals	54
		DECISIONS
	*	Council Decision (EU) 2017/1138 of 19 June 2017 on the position to be taken on behalf of the European Union at the first meeting of the Conference of the Parties of the Minamata Convention on Mercury as regards the adoption of the required content of the certification referred to in Article 3(12) of the Convention and of the guidance referred to in Article 8(8) and (9) of the Convention	56
	*	Commission Implementing Decision (EU) 2017/1139 of 23 June 2017 amending the Annex to Implementing Decision (EU) 2017/247 on protective measures in relation to outbreaks of the highly pathogenic avian influenza in certain Member States (notified under document C(2017) 4450) ( 1 )	59
		RECOMMENDATIONS
	*	Commission Recommendation (EU) 2017/1140 of 23 June 2017 on personal data that may be exchanged through the Early Warning and Response System (EWRS) established pursuant to Decision No 1082/2013/EU of the European Parliament and of the Council for the purposes of the coordination of contact tracing measures in relation to serious cross-border threats to health (notified under document C(2017) 4197) ( 1 )	65


	(1) Text with EEA relevance.

EN	Acts whose titles are printed in light type are those relating to day-to-day management of agricultural matters, and are generally valid for a limited period. The titles of all other Acts are printed in bold type and preceded by an asterisk.

II Non-legislative acts

REGULATIONS

27.6.2017

Official Journal of the European Union

L 164/1

COUNCIL REGULATION (EU) 2017/1133

of 20 June 2017

amending Regulation (EU) No 1388/2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)

In order to ensure the sufficient and uninterrupted supply of certain goods insufficiently produced in the Union and to avoid any disturbances on the market for certain agricultural and industrial products, autonomous tariff quotas were opened by Council Regulation (EU) No 1388/2013 (1). Products within those tariff quotas can be imported into the Union at reduced or zero duty rates. For those reasons it is necessary to open, with effect from 1 July 2017, tariff quotas at zero duty rates for an appropriate volume as regards seven new products.

(2)	In the case of five additional products, the tariff quota volumes should be increased, as this increase is in the interest of economic operators and of the Union.

(3)	Moreover, for one product the increase in tariff quota volume should only apply to the second half of the year 2017, while the existing tariff quota for that product should be given an end date of 31 December 2017.

(4)	Regulation (EU) No 1388/2013 should therefore be amended accordingly.

(5)	As the changes regarding the tariff quotas for the products concerned provided for in this Regulation have to apply from 1 July 2017, this Regulation should enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1388/2013 is amended as follows:

(1)

the rows for the tariff quotas with order numbers 09.2828, 09.2842, 09.2844, 09.2846, 09.2848, 09.2850, 09.2868, and 09.2870 set out in Annex I to this Regulation are inserted following the order of the CN codes indicated in the second column of the table in the Annex to Regulation (EU) No 1388/2013;

(2)	the rows for the tariff quotas with order numbers 09.2629, 09.2658, 09.2668, 09.2669, 09.2687 and 09.2860 are replaced by the rows set out in Annex II to this Regulation.

Article 2

This Regulation shall enter into force on the date of its publication in the Official Journal of the European Union.

It shall apply from 1 July 2017.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Luxembourg, 20 June 2017.

For the Council

The President

H. DALLI

(1) Council Regulation (EU) No 1388/2013 of 17 December 2013 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 7/2010 (OJ L 354, 28.12.2013, p. 319).

ANNEX I

Order number

CN code

TARIC

Description

Quota period

Quota volume

Quota duty (%)

‘09.2828

2712 20 90

Paraffin wax containing by weight less than 0,75 % of oil

1.7-31.12

60 000 tonnes

0 %

09.2842

2932 12 00

2-Furaldehyde (furfuraldehyde)

1.7-31.12

5 000 tonnes

0 %

09.2844

ex 3824 99 92

Mixtures containing by weight:

—	60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2),

—	8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8),

—	5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6),

—	not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and

—	not more than 1 % of ethyl chloride (CAS RN 75-00-3)

1.7-31.12

3 000 tonnes

0 %

09.2846

ex 3907 40 00

Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)

1.7-31.12

800 tonnes

0 %

09.2848

ex 5505 10 10

Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66)

1.7-31.12

5 000 tonnes

0 %

09.2870

ex 7019 40 00

E-fibre glass fabrics:

—	having a weight of 20 gr/m2 or more, but not more than 209 g/m2,

—	impregnated with silane,

—	having a humidity content by weight of 0,13 % or less, and

—	having not more than 3 hollow fibres out of 100 000 fibres,

for use in the manufacture of prepreg plates, rolls or laminates for the production of printed circuit boards for the motor vehicle industry (2)

1.7-31.12

3 000 km

0 %

ex 7019 52 00

09.2850

ex 8414 90 00

Aluminium alloy compressor wheel with:

—	a diameter of 20 mm or more, but not more than 130 mm, and

—	a weight of 5 g or more, but not more than 800 g

for use in the manufacture of combustion engines (2)

1.7-31.12

2 950 000 pieces

0 %

09.2868

ex 8714 10 90

Pistons for suspension systems, having a diameter of not more than 55 mm, of sintered steel

1.7-31.12

1 000 000 pieces

0 %’

ANNEX II

Order number	CN code	TARIC	Description	Quota period	Quota volume	Quota duty (%)
‘09.2860	ex 2933 69 80	30	1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)	1.1-31.12	600 tonnes	0 %
09.2658	ex 2933 99 80	73	5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)	1.1-31.12	400 tonnes	0 %
09.2687	ex 3907 40 00	25	Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)	1.1-31.12.2017	400 tonnes	0 %
09.2629	ex 8302 49 00	91	Aluminium telescopic handle for use in the manufacture of luggage (2)	1.1-31.12	1 500 000 pieces	0 %
09.2668	ex 8714 91 10	21	Bicycle frame, constructed from carbon fibres and artificial resin, painted, lacquered and/or polished, for use in the manufacture of bicycles (2)	1.1-31.12	350 000 pieces	0 %
09.2668	ex 8714 91 10	31		1.1-31.12	350 000 pieces	0 %
09.2669	ex 8714 91 30	21	Bicycle front fork, constructed from carbon fibres and artificial resin, painted, lacquered and/or polished, for use in the manufacture of bicycles (2)	1.1-31.12	270 000 pieces	0 %’
09.2669	ex 8714 91 30	31		1.1-31.12	270 000 pieces	0 %’

27.6.2017

Official Journal of the European Union

L 164/6

COUNCIL REGULATION (EU) 2017/1134

of 20 June 2017

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)

The Union production of 69 agricultural and industrial products that are not listed in the Annex to Council Regulation (EU) No 1387/2013 (1) is inadequate or non-existent. It is, therefore, in the interest of the Union to completely suspend the autonomous Common Customs Tariff (‘CCT’) duties on those products.

(2)

It is necessary to modify the conditions for 71 suspensions of autonomous CCT duties currently listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends on the market. Certain product classifications have been amended to allow the industry to fully benefit from the suspensions in force. Moreover, the Annex to Regulation (EU) No 1387/2013 should be updated due to the need to align or clarify texts in some cases. The modified conditions relate to changes in the product description, classification or end-use requirements. The suspensions that require modifications should be deleted from the list of suspensions in the Annex to Regulation (EU) No 1387/2013, and the modified suspensions should be inserted into that list.

(3)	It is no longer in the interest of the Union to maintain the suspension of autonomous CCT duties for two of the products that are currently listed in the Annex to Regulation (EU) No 1387/2013.

(4)	In the interests of clarity, the entries modified by this Regulation should be marked with an asterisk.

(5)	Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(6)	As the changes regarding the suspensions for the products concerned provided for in this Regulation have to apply from 1 July 2017, this Regulation should enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1387/2013 is amended as follows:

(1)	the rows for the products listed in Annex I to this Regulation are inserted following the order of the CN codes indicated in the first column of the table in the Annex to Regulation (EU) No 1387/2013;

(2)	the rows for the products for which the CN and TARIC codes are set out in Annex II to this Regulation are deleted.

Article 2

This Regulation shall enter into force on the date of its publication in the Official Journal of the European Union.

It shall apply from 1 July 2017.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Luxembourg, 20 June 2017.

For the Council

The President

H. DALLI

(1) Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201).

ANNEX I

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

*ex 2818 30 00

Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)

0 %

—

31.12.2018

ex 2825 70 00

Molybdic Acid (CAS RN 7782-91-4)

0 %

—

31.12.2021

*ex 2842 10 00

Aluminosilicate (CAS RN 1318-02-1) with a zeolite structure of Aluminophosphate-eighteen (AEI) for use in the manufacture of catalytic preparations (2)

0 %

—

31.12.2021

*ex 2905 11 00

ex 2905 19 00

Methyl methanesulphonate (CAS RN 66-27-3)

0 %

—

31.12.2021

ex 2905 22 00

3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)

0 %

—

31.12.2021

ex 2909 30 90

{[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)

0 %

—

31.12.2021

ex 2909 30 90

1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane

0 %

—

31.12.2021

*ex 2909 60 00

1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 2781-00-2) or mixture of isomers 1,4-Di(2-tert-butylperoxyisopropyl)benzene and 1,3-di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)

0 %

—

31.12.2017

ex 2912 19 00

Undecanal (CAS RN 112-44-7)

0 %

—

31.12.2021

ex 2915 12 00

Aqueous solution containing by weight 60 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1)

0 %

—

31.12.2021

*ex 2916 14 00

Allyl methacrylate (CAS RN 96-05-9) and its' isomers with a purity by weight of 98 % or more and containing at least:

—	0,01 % or more but not more than 0,02 % of Allyl alcohol (CAS RN 107-18-6),

—	0,01 % or more but not more than 0,1 % of Methacrylic acid (CAS RN 79-41-4), and

—	0,5 % or more but not more than 1 % of 4-Methoxyphenol (CAS RN 150-76-5)

0 %

—

31.12.2020

ex 2916 39 90

Methyl 4′-(bromomethyl)biphenyl-2-carboxylate (CAS RN 114772-38-2)

0 %

—

31.12.2021

ex 2916 39 90

(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)

0 %

—

31.12.2021

*ex 2920 29 00

ex 2920 90 70

Fosetyl-aluminium (CAS RN 39148-24-8)

0 %

—

31.12.2018

*ex 2920 29 00

ex 2920 90 70

Fosetyl-sodium (CAS RN 39148-16-8) in form of an aqueous solution with a content by weight of fosetyl-sodium of 35 % or more but not more than 45 % for use in the manufacture of pesticides (2)

0 %

—

31.12.2021

ex 2922 19 00

(R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)

0 %

—

31.12.2021

ex 2924 29 70

Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)

0 %

—

31.12.2021

ex 2924 29 70

N-Benzyloxycarbonyl-L-tert-leucine isopropylamine salt (CAS RN 1621085-33-3)

0 %

—

31.12.2021

ex 2926 90 70

4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)

0 %

—

31.12.2021

*ex 2931 90 00

Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to note 1e to Chapter 29 of the CN

0 %

—

31.12.2020

*ex 2932 14 00

ex 2940 00 00

1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4 deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)

0 %

—

31.12.2019

ex 2932 99 00

(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)

0 %

—

31.12.2021

ex 2932 99 00

4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)

0 %

—

31.12.2021

ex 2933 19 90

5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)

0 %

—

31.12.2021

ex 2933 19 90

5-Methyl-1-(naphthalen-2-yl)-1,2-dihydro-3H-pyrazol-3-one (CAS RN 1192140-15-0)

0 %

—

31.12.2021

ex 2933 29 90

2,2′-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)

0 %

—

31.12.2021

ex 2933 39 99

2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7)

0 %

—

31.12.2021

ex 2933 39 99

5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)

0 %

—

31.12.2021

ex 2933 39 99

2-chloro-6-(3-fluoro-5-isobutoxyphenyl)nicotinic acid (CAS RN 1897387-01-7)

0 %

—

31.12.2021

ex 2933 39 99

Fluopicolide (ISO) (CAS RN 239110-15-7) for use in the manufacture of pesticides (2)

0 %

—

31.12.2021

*ex 2933 59 95

ex 2933 99 80

Diquat dibromide (ISO) (CAS RN 85-00-7) in aqueous solution for use in the manufacture of herbicides (2)

0 %

—

31.12.2021

ex 2933 99 80

(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)

0 %

—

31.12.2021

ex 2933 99 80

(2S,3S,4R)-Methyl 3-ethyl-4-hydroxypyrrolidine-2-carboxylate 4-methylbenzenesulphonate (CAS RN 1799733-43-9)

0 %

—

31.12.2021

*ex 2933 99 80

Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS 0133723-1) (5)

0 %

—

31.12.2018

*ex 2933 99 80

1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)

0 %

—

31.12.2018

ex 2934 99 90

4-Methoxy-5-(3-morpholin-4-yl-propoxy)-2-nitro-benzonitrile (CAS RN 675126-26-8)

0 %

—

31.12.2021

ex 2934 99 90

Thidiazuron (ISO) (CAS RN 51707-55-2) for use in the manufacture of pesticides (2)

0 %

—

31.12.2021

ex 2934 99 90

Cytidine 5′-(disodium phosphate) (CAS RN 6757-06-8)

0 %

—

31.12.2021

ex 2934 99 90

4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0)

0 %

—

31.12.2021

ex 2935 90 90

6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)

0 %

—

31.12.2021

*ex 3204 16 00

Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:

—	Colourant Reactive Yellow 201 (CAS RN 27624-67-5),

—	1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or

—	3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)

0 %

—

31.12.2019

ex 3204 17 00

Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight

0 %

—

31.12.2021

*ex 3204 17 00

Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 50 % or more by weight

0 %

—

31.12.2018

*ex 3215 90 70

Disposable cartridge ink, containing by weight:

—	1 % or more, but not more than 10 % of amorphous silicon dioxide or

—	3,8 % or more of dye C.I. Solvent Black 7 in organic solvents

for use in the marking of integrated circuits (2)

0 %

—

31.12.2018

*ex 3506 91 10

ex 3506 91 90

Preparation containing by weight:

—	15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers and

—	10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers

dissolved in:

—	Methyl ethyl ketone (CAS RN 78-93-3)

—	Heptane (CAS RN 142-82-5), and

—	Toluene (CAS RN 108-88-3) or light aliphatic solvent naphta (CAS RN 64742-89-8)

0 %

—

31.12.2020

ex 3811 21 00

Dispersing agent and oxidation inhibitor containing:

—	o-amino polyisobutylenephenol (CAS RN 78330-13-9),

—	more than 30 % by weight but not more than 50 % by weight of mineral oils,

used in the manufacture of blends of additives for lubricating oils (2)

0 %

—

31.12.2021

*ex 3811 21 00

Additives containing:

—	a polyisobutylene succinimide based mixture, and

—	more than 30 % but not more than 50 % by weight of mineral oils,

having a total base number of more than 40, for use in the manufacture of lubricating oils (2)

0 %

—

31.12.2019

ex 3811 29 00

Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils (2)

0 % (2)

—

31.12.2021

ex 3811 90 00

Corrosion inhibitor containing:

—	polyisobutenyl succinic acid and

—	more than 5 % and not more than 20 % by weight of mineral oils

for use in the manufacture of blends of additives for fuels (2)

0 %

—

31.12.2021

*ex 3815 90 90

Catalyst:

—	containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,

—	in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm

for use in the manufacture of acrylic acid (2)

0 %

—

31.12.2018

ex 3824 99 92

Preparation containing by weight:

—	25 % or more but not more than 50 % of diethyl carbonate (CAS RN 105-58-8)

—	25 % or more but not more than 50 % of ethylene carbonate (CAS RN 96-49-1)

—	10 % or more but not more than 20 % of lithium hexafluorophosphate (CAS RN 21324-40-3)

—	5 % or more but not more than 10 % of ethyl methyl carbonate (CAS RN 623-53-0)

—	1 % or more but not more than 2 % of vinylene carbonate (CAS RN 872-36-6)

—	1 % or more but not more than 2 % of 4-fluoro-1,3-dioxolane-2-one (CAS RN 114435-02-8)

—	Not more than 1 % of 1,5,2,4-Dioxadithiane 2,2,4,4-tetraoxide (CAS RN 99591-74-9)

0 %

—

31.12.2021

ex 3824 99 92

4-Methoxy-3-(3-morpholin-4-yl-propoxy)-benzonitrile (CAS RN 675126-28-0) in an organic solvent

0 %

—

31.12.2021

ex 3824 99 92

Aqueous solution of caesium formate and potassium formate containing by weight:

—	1 % or more but not more than 84 % of caesium formate (CAS RN 3495-36-1),

—	1 % or more but not more than 76 % of potassium formate (CAS RN 590-24-1), and

—	whether or not containing not more than 9 % of additives

0 %

—

31.12.2021

*ex 3824 99 92

Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent

0 %

—

31.12.2020

*ex 3824 99 92

Preparation containing by weight:

—	80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)

—	7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and

—	not more than 1 % triphenyl phosphate (CAS RN 115-86-6)

0 %

—

31.12.2020

ex 3824 99 93

Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:

—	not more than 20 % of disodium sulphate, and

—	not more than 10 % of sodium chloride

0 %

—

31.12.2021

ex 3824 99 96

Powder containing by weight:

—	28 % or more but not more than 51 % of talc (CAS RN 14807-96-6)

—	30,5 % or more but not more than 48 % of silicon dioxide (quartz) (CAS RN 14808-60-7)

—	17 % or more but not more than 26 % of aluminium oxide (CAS RN 1344-28-1)

0 %

—

31.12.2021

ex 3824 99 96

Mixture with a non-stoichiometric composition:

—	with a crystalline structure,

—	with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm

0 %

—

31.12.2021

ex 3824 99 96

Mixture consisting of:

—	64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9)

—	25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) and

—	not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)

0 %

—

31.12.2021

*ex 3901 10 10

ex 3901 90 80

High flow linear low density polyethylene-1-butene/LLDPE (CAS RN 25087-34-7) in form of powder, with

—	a melt flow rate (MFR 190 °C/2,16 kg) of 16 g/10 min or more, but not more than 24 g/10 min and

—	a density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 and

—	a vicat softening temperature of min. 94 °C

0 %

—

31.12.2019

ex 3906 90 90

Polyacrylamide powder having an average particle size of less than 2 microns and a melting point of more than 260 °C, containing by weight:

—	75 % or more but not more than 85 % of polyacrylamide and

—	15 % or more but not more than 25 % of polyethylene glycol

0 %

—

31.12.2021

ex 3906 90 90

Copolymer of (Dimethoxymethylsilyl)propyl methacrylate, butylacrylate, allyl methacrylate, methyl methacrylate and cyclosiloxanes (CAS RN 143106-82-5)

0 %

—

31.12.2021

ex 3910 00 00

Dimethyl Siloxane, hydroxy-terminated polymer with a viscosity of 38-45 mPa · s (CAS RN 70131-67-8)

0 %

—

31.12.2021

ex 3910 00 00

Preparation containing by weight:

—	55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2),

—	30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and

—	1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)

0 %

—

31.12.2021

*ex 3913 90 00

Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350 000

0 %

—

31.12.2018

ex 3920 99 59

Tetrafluoroethylene film, put up in rolls, with:

—	a thickness of 50 μm,

—	a melting point of 260 °C, and

—	a specific gravity of 1,75 (ASTM D792)

for use in the manufacture of semiconductor devices (2)

0 %

—

31.12.2021

*ex 3921 13 10

Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092

0 %

—

31.12.2018

ex 3921 19 00

Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with:

—	a total thickness of more than 0,05 mm but not more than 0,20 mm,

—	a water entry pressure between 5 and 200 kPa according to ISO 811, and

—	an air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5

0 %

—

31.12.2021

*ex 3923 10 90

Photomask or wafer compacts:

—	consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

—	having non porous, abrasion resistant or impact resistant surface properties,

—	fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and

—	with or without a gasket seal,

of a kind used in the photolithography or other semiconductor production to house photomasks or wafers

0 %

—

31.12.2021

*ex 3926 30 00

ex 8708 29 10

ex 8708 29 90

Plastic cover with cips for the exterior rear-view mirror of motor vehicles

0 %

p/st

31.12.2020

*ex 3926 90 97

Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls

0 %

p/st

31.12.2019

ex 3926 90 97

ex 8512 90 90

Silicone decoupling ring, with an inner diameter of 15,4 mm (+ 0,0 mm/– 0,1 mm), of a kind used in car parking aid sensor systems

0 %

p/st

31.12.2021

ex 4016 99 57

Air intake hose for air supply to the combustion part of the engine comprising at least:

—	one flexible rubber hose,

—	one plastic hose, and

—	metal clips,

—	whether or not a resonator

for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

ex 4016 99 57

Rubber bumper strip with a silicone coating of a length not more than 1 200 mm and with at least five plastic clips for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 5911 90 99

ex 8421 99 90

Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more

0 %

—

31.12.2018

*ex 5911 90 99

Multi-layered non-woven polyester polishing pads, impregnated with polyurethane

0 %

—

31.12.2019

ex 6805 30 00

Probe tips cleaning material consisting of a polymer matrix containing abrasive particles mounted on a substrate for use in the manufacture of semiconductors (2)

0 %

—

31.12.2021

ex 7318 19 00

Connecting rod for the master brake cylinder with screw threads on both ends for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 7410 11 00

ex 8507 90 80

ex 8545 90 90

Roll of laminate foil of graphite and copper, with:

—	a width of 610 mm or more but not more than 620 mm, and

—	a diameter of 690 mm or more but not more than 710 mm,

for use in the manufacture of lithium-ion electric rechargeable batteries (2)

0 %

—

31.12.2021

*ex 7607 11 90

ex 7607 11 90

Aluminium foil in rolls:

—	having a purity of 99,99 % by weight,

—	of a thickness of 0,021 mm or more but not more than 0,2 mm,

—	with a width of 500 mm,

—	with a surface oxide layer by 3 to 4 nm thick,

—	and with a cubic texture of more than 95 %

0 %

—

31.12.2021

*ex 7607 19 90

ex 8507 90 80

Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with:

—	a width of 595 mm or more but not more than 605 mm, and

—	a diameter of 690 mm or more but not more than 710 mm,

for use in the manufacture of cathodes for lithium-ion electric rechargeable batteries (2)

0 %

—

31.12.2021

*ex 7616 99 10

ex 8708 99 10

ex 8708 99 97

Aluminium engine bracket, with dimensions of:

—	height of more than 10 mm but not more than 200 mm

—	width of more than 10 mm but not more than 200 mm

—	length of more than 10 mm but not more than 200 mm

equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:

—	internal porosity not more than 1 mm;

—	outer porosity not more than 2 mm;

—	Rockwell hardness HRB 10 or more

of a kind used in the production of suspensions systems for engines in motor vehicles

0 %

p/st

31.12.2019

*ex 8108 90 30

Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708 92 or 8714 10 40 (2)

0 %

—

31.12.2017

*ex 8108 90 50

Alloy of titanium and aluminium, containing by weight 1 % or more but not more than 2 % of aluminium, in sheets or rolls, of a thickness of 0,49 mm or more but not more than 3,1 mm, of a width of 1 000 mm or more but not more than 1 254 mm, for the manufacture of goods of subheading 8714 10 (2)

0 %

—

31.12.2018

*ex 8108 90 50

Plates, sheets and strips of an alloy of titanium

0 %

—

31.12.2021

*ex 8301 60 00

ex 8413 91 00

ex 8419 90 85

ex 8438 90 00

ex 8468 90 00

ex 8476 90 90

ex 8479 90 70

ex 8481 90 00

ex 8503 00 99

ex 8515 90 80

ex 8536 90 95

ex 8537 10 98

ex 8708 91 20

ex 8708 91 99

ex 8708 99 10

ex 8708 99 97

Keypads of silicone or plastic,

—	whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood,

—	whether or not printed or surface treated,

—	whether or not with electrical conducting elements,

—	whether or not with keypads foil glued on the keyboard,

—	whether or not with protective foil,

—	single or multilayer

0 %

p/st

31.12.2020

*ex 8409 91 00

ex 8409 99 00

Exhaust manifold with spiral-shaped gas turbine turbocharger component with:

—	a heat-resistance of not more than 1 050 °C, and

—	a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm

0 %

p/st

31.12.2018

ex 8409 99 00

Plastic or aluminum cylinder head cover with:

—	a camshaft position sensor (CMPS),

—	metal brackets for mounting on an engine, and

—	two or more gaskets,

for use in the manufacture of engines of motor vehicles (2)

0 %

p/st

31.12.2021

ex 8411 99 00

Spiral-shaped gas turbine turbocharger component:

—	with a heat-resistance of not more than 1 050 °C, and

—	with a turbine wheel hole diameter of 30 mm or more, but not more than 110 mm

0 %

p/st

31.12.2021

ex 8413 30 20

Single-cylinder radial-piston high pressure pump for gasoline direct injection with:

—	an operating pressure of 200 bar or more, but not more than 350 bar,

—	a flow control, and

—	a pressure relief valve,

for use in the manufacture of engines of motor vehicles (2)

0 %

—

31.12.2021

ex 8479 90 70

Fuel hose for internal combustion piston engines with a fuel temperature sensor, with at least two inlet hoses and three outlet hoses for use in the manufacture of engines of motor vehicles (2)

0 %

p/st

31.12.2021

ex 8481 80 59

Pressure regulating valve for incorporation into compressors of motor vehicle air condition units (2)

0 %

p/st

31.12.2021

ex 8484 20 00

Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units (2)

0 %

p/st

31.12.2021

ex 8501 10 99

DC Motor:

—	with a speed rotation of not more than 7 000 rpm (without load),

—	with a nominal voltage of 12 V (± 4 V),

—	with a maximum power of 13,78 W (at 3,09 A),

—	with a specified temperature range from – 40 °C to 160 °C,

—	with a gear connection,

—	with a mechanical attachment interface,

—	with 2 electrical connections,

—	with a maximum torque of 100 Nm

0 %

—

31.12.2021

ex 8501 10 99

DC Motor:

—	with a speed rotation of not more than 6 500 rpm (without load),

—	with a nominal voltage of 12 V (± 4 V),

—	with a maximal power below than 20 W,

—	with a specified temperature range from – 40 °C to 160 °C,

—	with a worm gear drive,

—	with a mechanical attachment interface,

—	with 2 electrical connections,

—	with a maximum torque of 75 Nm

0 %

—

31.12.2021

*ex 8501 10 99

Electric turbocharger actuator, with:

—	a DC motor,

—	an integrated gear mechanism,

—	a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,

—	a (pulling) force of 250 N or more in each position of its stroke,

—	an effective stroke of 15 mm or more but not more than 25 mm,

—	with or without an on-board diagnostics interface

0 %

—

31.12.2020

*ex 8504 31 80

Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry (2)

0 %

—

31.12.2021

*ex 8504 40 90

Direct current to direct current converter

—	without housing or

—	with housing with connection pins, connection studs, screw connectors, unprotected line connections, connection elements which allow the mounting to a printed circuit board by soldering or any other technology, or other wiring connections requiring further processing

0 %

p/st

31.12.2021

ex 8504 50 95

Solenoid coil with:

—	a rated power of more than 10 W but not more than 15 W,

—	an insulation resistance of 100 M Ohms or more,

—	a DC resistance of not more than 34,8 Ohm (± 10 %) at 20 °C,

—	a rated current of not more than 1,22 A,

—	a rated voltage of not more than 25 V

0 %

p/st

31.12.2021

*ex 8505 11 00

Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having

—	a length of not more than 140 mm,

—	a width of not more than 90 mm, and

—	a thickness of not more than 55 mm,

or in the shape of curved rectangle (tile type) having

—	a length of not more than 75 mm,

—	a width of not more than 40 mm,

—	a thickness of not more than 7 mm, and

—	a radius of curvature of more than 86 mm but not more than 241 mm

or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre

0 %

p/st

31.12.2018

*ex 8505 11 00

A quarter sleeve intended to become permanent magnet after magnetization,

—	consisting of at least neodymium, iron and boron,

—	with a width of 9,1 mm or more but not more than 10,5 mm,

—	with a length of 20 mm or more but not more than 30,1 mm,

of a kind used on rotors for the manufacture of fuel pumps

0 %

p/st

31.12.2019

*ex 8507 90 80

Cut plate of nickel-plated copper foil, with:

—	a width of 70 mm (± 5 mm),

—	a thickness of 0,4 mm (± 0,2 mm),

—	a length of not more than 55 mm,

for use in the manufacture of lithium-ion electric rechargeable batteries (2)

0 %

p/st

31.12.2021

ex 8518 40 80

Audio power amplifier with:

—	an output power of 50 W,

—	an operating voltage of more than 9 V but not more than 16 V,

—	an electrical impedance of not more than 4 Ohm,

—	a sensitivity of more than 80 dB

—	in a metal housing

for use in the manufacture of motor vehicles (2)

0 %

p/st

31.12.2021

*ex 8522 90 80

ex 8529 90 92

Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (2)

0 %

p/st

31.12.2021

*ex 8529 90 65

ex 8529 90 92

Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module

0 %

p/st

31.12.2020

*ex 8529 90 92

LCD modules with:

—	a diagonal measurement of the screen of 14,5 cm or more but not more than 25,5 cm,

—	a LED backlight,

—	a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network)bus or APIX2 (Automative Pixel Link) driver module and other active and passive components,

—	6 to 8 pin plug for power supply and 2 to 4- pin LVDS (Low-voltage differential signalling) or APIX2 interface,

—	whether or not in a housing,

for permanent incorporation or permanent mounting into motor vehicles of Chapter 87 (2)

0 %

p/st

31.12.2020

*ex 8529 90 92

LCD module

—	with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,

—	with or without a touch screen,

—	with an LED backlight,

—	with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,

—	with a plug for power supply and CAN and LVDS interfaces,

—	with or without electronic components for dynamic adjustments of colour,

—	in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,

suitable for installation in motor vehicles of Chapter 87 (2)

0 %

p/st

31.12.2020

*ex 8529 90 92

Colour LCD display panel for LCD monitors of heading 8528 :

—	with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

—	with or without a touch screen,

—	with backlight, micro-controller,

—	with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,

—	in a housing with or without a heat sink at the back of the housing,

—	without a signal-processing module,

—	whether or not with haptic and acoustical feedback,

for use in the manufacture of vehicles of Chapter 87 (2)

0 %

p/st

31.12.2020

*ex 8536 90 95

Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1 000 V

0 %

p/st

31.12.2020

*ex 8536 90 95

Metallic stamped frame with connections

0 %

p/st

31.12.2018

*ex 8536 90 95

ex 8544 49 93

Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements

0 %

p/st

31.12.2018

ex 8537 10 98

Lever for control module under the steering wheel:

—	with one or more single or multi-positional electrical switches (push-button, rotary or other),

—	whether or not equipped with printed circuit boards and electrical cables,

—	for a voltage of 9 V or more but not more than 16 V,

of a kind used in the manufacture of motor vehicles of Chapter 87

0 %

p/st

31.12.2021

ex 8537 10 98

Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:

—	an antenna,

—	a connector,

—	a metal holder,

for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 8537 10 98

Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors

0 %

p/st

31.12.2018

ex 8538 90 99

Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87

0 %

p/st

31.12.2021

ex 8543 70 90

Laminated electrochromic film consisting of:

—	two outer layers of polyester,

—	a middle layer of acrylic polymer and silicone, and

—	two electric connection terminals

0 %

—

31.12.2021

*ex 8543 70 90

High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing

0 %

—

31.12.2021

ex 8544 42 90

12-wire connecting cable containing two connectors

—	of a voltage of 5 V,

—	with a length of not more than 300 mm

for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

ex 8708 10 10

ex 8708 10 90

Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 8708 30 10

ex 8708 30 91

ex 8708 30 99

Motor powered brake actuation unit

—	with a rating of 13,5 V (± 0,5 V) and

—	a ball screw mechanism to control brake fluid pressure in the master cylinder

for use in the manufacture of electric motor vehicles (2)

0 %

p/st

31.12.2019

*ex 8708 30 10

ex 8708 30 91

Body of disc type brake in BIR (‘Ball in Ramp’) or EPB (‘Electronic Parking Brake’) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2019

*ex 8708 30 10

ex 8708 30 91

Drum type parking brake:

—	operating within the service brake disk,

—	with a diameter of 170 mm or more but not more than 195 mm

for use in the manufacture of motor vehicles (2)

0 %

p/st

31.12.2021

*ex 8708 30 10

ex 8708 30 91

Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2019

*ex 8708 30 10

ex 8708 30 91

Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

*ex 8708 40 20

ex 8708 40 50

Automatic hydrodynamic gearbox

—	with a hydraulic torque converter,

—	without transfer box and cardan shaft,

—	whether or not with front differential,

for use in the manufacture of motor vehicles of Chapter 87 (2)

0 %

p/st

31.12.2020

*ex 8708 50 20

ex 8708 50 55

Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 8703

0 %

p/st

31.12.2020

*ex 8708 50 20

ex 8708 50 99

Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle

—	of a length of 1 m or more but not more than 2 m,

—	of a weight of 6 kg or more but not more than 9 kg

0 %

p/st

31.12.2020

*ex 8708 50 20

ex 8708 50 99

ex 8708 99 10

ex 8708 99 97

Single input, dual output gearcase (transmission) in a cast aluminum housing, with overall dimensions of 273 mm (width) × 131 mm (height) × 187 mm (length), comprising at least:

—	two electro-magnetic one direction clutches, working in opposite sides,

—	an input shaft with an outer diameter of 24 mm (± 1 mm), ended with 22 teeth spline, and

—	a coaxial output bushing with an inner diameter of 22 mm (± 1 mm), ended with 22 teeth spline

for use in the manufacture of all-terrain vehicles or utility task vehicles (2)

0 %

—

31.12.2021

*ex 8708 80 20

ex 8708 80 35

Upper strut insulator containing

—	a metal holder with three mounting screws, and

—	a rubber bump

of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

*ex 8708 80 20

ex 8708 80 91

Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

*ex 8708 80 20

ex 8708 80 91

Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

ex 8708 80 99

Stabilizer bar for front axle equipped with a ball pivot on both ends for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 8708 91 20

ex 8708 91 35

Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2019

*ex 8708 91 20

ex 8708 91 99

Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:

—	an insulating area flatness of not more than 0,1 mm,

—	a permissible particle quantity of 0,3 mg per tank,

—	a distance between pores of 2 mm or more,

—	pore sizes of not more than 0,4 mm, and

—	not more than 3 pores larger than 0,2 mm

of a kind used in heat exchangers for car cooling systems

0 %

p/st

31.12.2020

*ex 8708 94 20

ex 8708 94 35

Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2019

*ex 8708 95 10

ex 8708 95 99

Front passenger airbag composed of:

—	a metal housing with at least six mounting brackets,

—	an embedded safety cushion,

—	a cartridge filled with compressed gas

of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2020

ex 8708 99 10

ex 8708 99 97

Front radiator holder whether or not with rubber cushioning for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

ex 8708 99 10

ex 8708 99 97

Support bracket of iron or steel, with mounting holes, whether or not with fixation nuts, for connecting the gearbox to the car body for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2021

*ex 8714 91 30

ex 8714 91 30

Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (2)

0 %

—

31.12.2018

*ex 9013 80 90

Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of:

—	one or more monolithic application-specific integrated circuits (ASIC),

—	one or more microelectromechanical mirrors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material

of a kind used for incorporation into products of Chapters 84 to 90 and 95

0 %

p/st

31.12.2019

ANNEX II

CN code	TARIC
ex 2818 30 00	30
ex 2842 10 00	40
ex 2905 11 00	20
ex 2909 60 00	20
ex 2916 14 00	30
ex 2920 90 70	40
ex 2920 90 70	50
ex 2931 90 00	05
ex 2933 59 95	88
ex 2933 99 80	53
ex 2933 99 80	72
ex 2940 00 00	40
ex 3204 16 00	20
ex 3204 17 00	67
ex 3215 90 70	30
ex 3506 91 10	50
ex 3506 91 90	50
ex 3811 21 00	57
ex 3815 90 90	40
ex 3824 99 92	21
ex 3824 99 92	24
ex 3824 99 92	69
ex 3901 10 10	20
ex 3901 90 80	50
ex 3913 90 00	92
ex 3921 13 10	10
ex 3923 10 00	10
ex 3926 30 00	10
ex 3926 90 97	20
ex 5911 90 90	30
ex 5911 90 90	40
ex 7410 11 00	10
ex 7607 11 90	40
ex 7607 19 90	10
ex 7616 99 10	30
ex 8108 90 30	20
ex 8108 90 50	10
ex 8108 90 50	25
ex 8301 60 00	20
ex 8409 91 00	65
ex 8409 99 00	30
ex 8411 99 00	70
ex 8413 91 00	40
ex 8419 90 85	30
ex 8421 99 00	92
ex 8438 90 00	20
ex 8468 90 00	20
ex 8476 90 10	20
ex 8476 90 90	20
ex 8479 90 70	83
ex 8481 90 00	30
ex 8501 10 99	55
ex 8503 00 99	70
ex 8504 31 80	50
ex 8504 40 90	20
ex 8505 11 00	33
ex 8505 11 00	45
ex 8507 90 80	60
ex 8507 90 80	70
ex 8507 90 80	80
ex 8515 90 80	30
ex 8522 90 80	30
ex 8529 90 65	65
ex 8529 90 92	35
ex 8529 90 92	36
ex 8529 90 92	50
ex 8536 90 40	20
ex 8536 90 40	92
ex 8536 90 40	94
ex 8536 90 40	95
ex 8536 90 95	20
ex 8536 90 95	92
ex 8536 90 95	94
ex 8536 90 95	95
ex 8537 10 98	70
ex 8537 10 98	92
ex 8543 70 90	33
ex 8543 90 00	15
ex 8544 49 93	10
ex 8545 90 90	30
ex 8708 29 90	10
ex 8708 30 10	20
ex 8708 30 10	30
ex 8708 30 91	10
ex 8708 30 91	20
ex 8708 30 91	30
ex 8708 30 91	40
ex 8708 30 91	50
ex 8708 40 20	20
ex 8708 40 50	10
ex 8708 50 55	10
ex 8708 50 99	10
ex 8708 50 99	20
ex 8708 80 35	10
ex 8708 80 91	10
ex 8708 80 91	20
ex 8708 91 35	10
ex 8708 91 99	20
ex 8708 91 99	30
ex 8708 94 35	20
ex 8708 95 99	10
ex 8708 99 10	20
ex 8708 99 97	40
ex 8708 99 97	50
ex 8708 99 97	70
ex 8714 91 30	24
ex 8714 91 30	34
ex 8714 91 30	71
ex 9013 80 90	10

27.6.2017

Official Journal of the European Union

L 164/28

COMMISSION REGULATION (EU) 2017/1135

of 23 June 2017

amending Annexes II and III to Regulation (EC) No 396/2005 of the European Parliament and of the Council as regards maximum residue levels for dimethoate and omethoate in or on certain products

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 396/2005 of the European Parliament and of the Council of 23 February 2005 on maximum residue levels of pesticides in or on food and feed of plant and animal origin and amending Council Directive 91/414/EEC (1), and in particular Article 14(1)(a) and Article 49(2) thereof,

Whereas:

(1)	For dimethoate (sum of dimethoate and omethoate expressed as dimethoate), maximum residue levels (MRLs) were set in Annex II and Part B of Annex III to Regulation (EC) No 396/2005.

(2)

On 22 April 2016 France informed the Commission of a national emergency measure taken in accordance with Article 54 of Regulation (EC) No 178/2002 of the European Parliament and of the Council (2) suspending the imports and placing on the market in France of fresh cherries from other Member States of the European Union or from third countries, in which the use of plant protection products containing the active substance dimethoate is allowed for the treatment of cherry trees. In accordance with Article 54(2) of that Regulation, on 28 April 2016, during a meeting of the Standing Committee on Plants, Animals, Food and Feed, it was agreed that an MRL review should be prioritised, in order to establish new MRLs, based on a scientific review carried out by the European Food Safety Authority, hereinafter ‘the Authority’. Therefore in accordance with Article 43 of Regulation (EC) No 396/2005, the Commission requested the Authority to carry out such a prioritised review of the existing MRLs for dimethoate and omethoate. The Authority submitted its reasoned opinion on 28 November 2016 (3).

(3)

The Authority proposed to change the residue definition of ‘sum of dimethoate and omethoate expressed as dimethoate’ to the separate residue definitions ‘dimethoate’ and ‘omethoate’ and concluded that the MRLs for melons and sugar beet roots may raise concerns of consumer protection. The Authority therefore recommended lowering the existing MRLs for these commodities. It concluded that concerning the MRLs for witloof no information was available and that further consideration by risk managers was required. Therefore the MRLs for this product should be set at the specific limit of determination. The Authority concluded that concerning the MRLs for Chinese cabbages no information was available on good agricultural practices that are safe for consumers and that further consideration by risk managers was required. Therefore the MRLs for this product should be set at the specific limit of determination. It concluded that concerning the MRLs for grapefruits, oranges, lemons, limes, mandarins, cherries, table olives, beetroots, carrots, celeriacs, horseradishes, parsnips, parsley roots, radishes, salsifies, swedes, turnips, garlic, onions, shallots, spring onions, tomatoes, aubergines, pumpkins, watermelons, broccoli, cauliflowers, Brussels sprouts, head cabbages, lettuces, asparagus, peas, olives for oil production, barley grains, oat grains, rye grains, wheat grains, sugar beet roots and chicory roots some information was not available and that further consideration by risk managers was required. As there is no risk for consumers, the MRLs for those products should be set in Annex II to Regulation (EC) No 396/2005 at the existing level or the level identified by the Authority. These MRLs will be reviewed; the review will take into account the information available within 2 years from the publication of this Regulation.

(4)	The Commission consulted the European Union reference laboratories for residues of pesticides as regards the need to adapt certain limits of determination. Those laboratories concluded that for certain commodities technical development requires the setting of specific limits of determination.

(5)	Based on the reasoned opinion of the Authority and taking into account the factors relevant to the matter under consideration, the appropriate modifications to the MRLs fulfil the requirements of Article 14(2) of Regulation (EC) No 396/2005.

(6)	Through the World Trade Organisation, the trading partners of the Union were consulted on the new MRLs and their comments have been taken into account.

(7)	Regulation (EC) No 396/2005 should therefore be amended accordingly.

(8)

In order to allow for the normal marketing, processing and consumption of products, this Regulation should provide for a transitional arrangement for products which have been produced before the modification of the MRLs and for which information shows that a high level of consumer protection is maintained. Because a risk to consumers cannot be excluded at the current MRL, the values for dimethoate and omethoate of 0,01 mg/kg for melons should apply to all products from the date of application of this Regulation.

(9)	A reasonable period should be allowed to elapse before the modified MRLs become applicable in order to permit Member States, third countries and food business operators to prepare themselves to meet the new requirements which will result from the modification of the MRLs.

(10)	The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,

HAS ADOPTED THIS REGULATION:

Article 1

Annexes II and III to Regulation (EC) No 396/2005 are amended in accordance with the Annex to this Regulation.

Article 2

As regards the active substance dimethoate in and on all products except melons, Regulation (EC) No 396/2005 as it stood before being amended by this Regulation shall continue to apply to products which were produced before 17 January 2018.

Article 3

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

It shall apply from 17 January 2018.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 23 June 2017.

For the Commission

The President

Jean-Claude JUNCKER

(1) OJ L 70, 16.3.2005, p. 1.

(2) Regulation (EC) No 178/2002 of the European Parliament and of the Council of 28 January 2002 laying down the general principles and requirements of food law, establishing the European Food Safety Authority and laying down procedures in matters of food safety (OJ L 31, 1.2.2002, p. 1).

(3) Reasoned opinion on the the prioritised review of the existing maximum residue levels for dimethoate and omethoate according to Article 43 of Regulation (EC) No 396/2005. EFSA Journal 2016;14(11):4647, 50 pp.

ANNEX

Annexes II and III to Regulation (EC) No 396/2005 are amended as follows:

(1)

in Annex II, the column for dimethoate is replaced by the following:

‘Pesticide residues and maximum residue levels (mg/kg)

Code number

Groups and examples of individual products to which the MRLs apply (1)

Dimethoate

(1)

(2)

(3)

0100000

FRUITS, FRESH or FROZEN; TREE NUTS

0110000

Citrus fruits

0,01 (*1)

0110010

Grapefruits

(+)

0110020

Oranges

(+)

0110030

Lemons

(+)

0110040

Limes

(+)

0110050

Mandarins

(+)

0110990

Others

0120000

Tree nuts

0,01 (*1)

0120010

Almonds

0120020

Brazil nuts

0120030

Cashew nuts

0120040

Chestnuts

0120050

Coconuts

0120060

Hazelnuts/cobnuts

0120070

Macadamias

0120080

Pecans

0120090

Pine nut kernels

0120100

Pistachios

0120110

Walnuts

0120990

Others

0130000

Pome fruits

0,01 (*1)

0130010

Apples

0130020

Pears

0130030

Quinces

0130040

Medlars

0130050

Loquats/Japanese medlars

0130990

Others

0140000

Stone fruits

0140010

Apricots

0,01 (*1)

0140020

Cherries (sweet)

0,02 (+)

0140030

Peaches

0,01 (*1)

0140040

Plums

0,01 (*1)

0140990

Others

0,01 (*1)

0150000

Berries and small fruits

0,01 (*1)

0151000

(a)

grapes

0151010

Table grapes

0151020

Wine grapes

0152000

(b)	strawberries

0153000

(c)	cane fruits

0153010

Blackberries

0153020

Dewberries

0153030

Raspberries (red and yellow)

0153990

Others

0154000

(d)	other small fruits and berries

0154010

Blueberries

0154020

Cranberries

0154030

Currants (black, red and white)

0154040

Gooseberries (green, red and yellow)

0154050

Rose hips

0154060

Mulberries (black and white)

0154070

Azaroles/Mediterranean medlars

0154080

Elderberries

0154990

Others

0160000

Miscellaneous fruits with

0161000

(a)	edible peel

0161010

Dates

0,01 (*1)

0161020

Figs

0,01 (*1)

0161030

Table olives

3 (+)

0161040

Kumquats

0,01 (*1)

0161050

Carambolas

0,01 (*1)

0161060

Kaki/Japanese persimmons

0,01 (*1)

0161070

Jambuls/jambolans

0,01 (*1)

0161990

Others

0,01 (*1)

0162000

(b)	inedible peel, small

0,01 (*1)

0162010

Kiwi fruits (green, red, yellow)

0162020

Litchis/lychees

0162030

Passionfruits/maracujas

0162040

Prickly pears/cactus fruits

0162050

Star apples/cainitos

0162060

American persimmons/Virginia kaki

0162990

Others

0163000

(c)	inedible peel, large

0,01 (*1)

0163010

Avocados

0163020

Bananas

0163030

Mangoes

0163040

Papayas

0163050

Granate apples/pomegranates

0163060

Cherimoyas

0163070

Guavas

0163080

Pineapples

0163090

Breadfruits

0163100

Durians

0163110

Soursops/guanabanas

0163990

Others

0200000

VEGETABLES, FRESH or FROZEN

0210000

Root and tuber vegetables

0211000

(a)

potatoes

0,01 (*1)

0212000

(b)	tropical root and tuber vegetables

0,01 (*1)

0212010

Cassava roots/manioc

0212020

Sweet potatoes

0212030

Yams

0212040

Arrowroots

0212990

Others

0213000

(c)	other root and tuber vegetables except sugar beets

0213010

Beetroots

0,01 (*1) (+)

0213020

Carrots

0,03 (+)

0213030

Celeriacs/turnip rooted celeries

0,03 (+)

0213040

Horseradishes

0,03 (+)

0213050

Jerusalem artichokes

0,01 (*1)

0213060

Parsnips

0,03 (+)

0213070

Parsley roots/Hamburg roots parsley

0,03 (+)

0213080

Radishes

0,03 (+)

0213090

Salsifies

0,03 (+)

0213100

Swedes/rutabagas

0,03 (+)

0213110

Turnips

0,03 (+)

0213990

Others

0,01 (*1)

0220000

Bulb vegetables

0220010

Garlic

0,01 (*1) (+)

0220020

Onions

0,01 (*1) (+)

0220030

Shallots

0,01 (*1) (+)

0220040

Spring onions/green onions and Welsh onions

2 (+)

0220990

Others

0,01 (*1)

0230000

Fruiting vegetables

0,01 (*1)

0231000

(a)

solanacea

0231010

Tomatoes

(+)

0231020

Sweet peppers/bell peppers

0231030

Aubergines/eggplants

(+)

0231040

Okra/lady's fingers

0231990

Others

0232000

(b)	cucurbits with edible peel

0232010

Cucumbers

0232020

Gherkins

0232030

Courgettes

0232990

Others

0233000

(c)	cucurbits with inedible peel

0233010

Melons

0233020

Pumpkins

(+)

0233030

Watermelons

(+)

0233990

Others

0234000

(d)	sweet corn

0239000

(e)	other fruiting vegetables

0240000

Brassica vegetables (excluding brassica roots and brassica baby leaf crops)

0241000

(a)	flowering brassica

0,02

0241010

Broccoli

(+)

0241020

Cauliflowers

(+)

0241990

Others

0242000

(b)	head brassica

0242010

Brussels sprouts

0,1 (+)

0242020

Head cabbages

0,01 (*1) (+)

0242990

Others

0,01 (*1)

0243000

(c)	leafy brassica

0,01 (*1)

0243010

Chinese cabbages/pe-tsai

0243020

Kales

0243990

Others

0244000

(d)	kohlrabies

0,01 (*1)

0250000

Leaf vegetables, herbs and edible flowers

0251000

(a)	lettuces and salad plants

0,01 (*1)

0251010

Lamb's lettuces/corn salads

0251020

Lettuces

(+)

0251030

Escaroles/broad-leaved endives

0251040

Cresses and other sprouts and shoots

0251050

Land cresses

0251060

Roman rocket/rucola

0251070

Red mustards

0251080

Baby leaf crops (including brassica species)

0251990

Others

0252000

(b)	spinaches and similar leaves

0,01 (*1)

0252010

Spinaches

0252020

Purslanes

0252030

Chards/beet leaves

0252990

Others

0253000

(c)	grape leaves and similar species

0,01 (*1)

0254000

(d)	watercresses

0,01 (*1)

0255000

(e)	witloofs/Belgian endives

0,01 (*1)

0256000

(f)	herbs and edible flowers

0,02 (*1)

0256010

Chervil

0256020

Chives

0256030

Celery leaves

0256040

Parsley

0256050

Sage

0256060

Rosemary

0256070

Thyme

0256080

Basil and edible flowers

0256090

Laurel/bay leave

0256100

Tarragon

0256990

Others

0260000

Legume vegetables

0,01 (*1)

0260010

Beans (with pods)

0260020

Beans (without pods)

0260030

Peas (with pods)

0260040

Peas (without pods)

0260050

Lentils

0260990

Others

0270000

Stem vegetables

0,01 (*1)

0270010

Asparagus

(+)

0270020

Cardoons

0270030

Celeries

0270040

Florence fennels

0270050

Globe artichokes

0270060

Leeks

0270070

Rhubarbs

0270080

Bamboo shoots

0270090

Palm hearts

0270990

Others

0280000

Fungi, mosses and lichens

0,01 (*1)

0280010

Cultivated fungi

0280020

Wild fungi

0280990

Mosses and lichens

0290000

Algae and prokaryotes organisms

0,01 (*1)

0300000

PULSES

0,01 (*1)

0300010

Beans

0300020

Lentils

0300030

Peas

(+)

0300040

Lupins/lupini beans

0300990

Others

0400000

OILSEEDS AND OIL FRUITS

0401000

Oilseeds

0,01 (*1)

0401010

Linseeds

0401020

Peanuts/groundnuts

0401030

Poppy seeds

0401040

Sesame seeds

0401050

Sunflower seeds

0401060

Rapeseeds/canola seeds

0401070

Soyabeans

0401080

Mustard seeds

0401090

Cotton seeds

0401100

Pumpkin seeds

0401110

Safflower seeds

0401120

Borage seeds

0401130

Gold of pleasure seeds

0401140

Hemp seeds

0401150

Castor beans

0401990

Others

0402000

Oil fruits

0402010

Olives for oil production

3 (+)

0402020

Oil palms kernels

0,01 (*1)

0402030

Oil palms fruits

0,01 (*1)

0402040

Kapok

0,01 (*1)

0402990

Others

0,01 (*1)

0500000

CEREALS

0500010

Barley

0,02 (*1) (+)

0500020

Buckwheat and other pseudo-cereals

0,01 (*1)

0500030

Maize/corn

0,01 (*1)

0500040

Common millet/proso millet

0,01 (*1)

0500050

Oat

0,02 (*1) (+)

0500060

Rice

0,01 (*1)

0500070

Rye

0,02 (+)

0500080

Sorghum

0,01 (*1)

0500090

Wheat

0,05 (+)

0500990

Others

0,01 (*1)

0600000

TEAS, COFFEE, HERBAL INFUSIONS, COCOA AND CAROBS

0610000

Teas

0,05 (*1)

0620000

Coffee beans

0,05 (*1)

0630000

Herbal infusions from

0631000

(a)

flowers

0631010

Chamomile

0,05 (*1)

0631020

Hibiscus/roselle

0,05 (*1)

0631030

Rose

0,1 (+)

0631040

Jasmine

0,05 (*1)

0631050

Lime/linden

0,05 (*1)

0631990

Others

0,05 (*1)

0632000

(b)	leaves and herbs

0,05 (*1)

0632010

Strawberry

0632020

Rooibos

0632030

Mate/maté

0632990

Others

0633000

(c)

roots

0,05 (*1)

0633010

Valerian

0633020

Ginseng

0633990

Others

0639000

(d)	any other parts of the plant

0,05 (*1)

0640000

Cocoa beans

0,05 (*1)

0650000

Carobs/Saint John's breads

0,05 (*1)

0700000

HOPS

0,05 (*1)

0800000

SPICES

0810000

Seed spices

0810010

Anise/aniseed

0810020

Black caraway/black cumin

0810030

Celery

0810040

Coriander

0810050

Cumin

0810060

Dill

0810070

Fennel

0810080

Fenugreek

0810090

Nutmeg

0810990

Others

0820000

Fruit spices

0,5

0820010

Allspice/pimento

0820020

Sichuan pepper

0820030

Caraway

0820040

Cardamom

0820050

Juniper berry

0820060

Peppercorn (black, green and white)

0820070

Vanilla

0820080

Tamarind

0820990

Others

0830000

Bark spices

0,05 (*1)

0830010

Cinnamon

0830990

Others

0840000

Root and rhizome spices

0840010

Liquorice

0,1

0840020

Ginger

0,1

0840030

Turmeric/curcuma

0,1

0840040

Horseradish

(+)

0840990

Others

0,1

0850000

Bud spices

0,05 (*1)

0850010

Cloves

0850020

Capers

0850990

Others

0860000

Flower pistil spices

0,05 (*1)

0860010

Saffron

0860990

Others

0870000

Aril spices

0,05 (*1)

0870010

Mace

0870990

Others

0900000

SUGAR PLANTS

0900010

Sugar beet roots

0,01 (*1) (+)

0900020

Sugar canes

0,01 (*1)

0900030

Chicory roots

0,03 (+)

0900990

Others

0,01 (*1)

1000000

PRODUCTS OF ANIMAL ORIGIN -TERRESTRIAL ANIMALS

1010000

Tissues from

1011000

(a)

swine

1011010

Muscle

1011020

Fat tissue

1011030

Liver

1011040

Kidney

1011050

Edible offals (other than liver and kidney)

1011990

Others

1012000

(b)

bovine

1012010

Muscle

1012020

Fat tissue

1012030

Liver

1012040

Kidney

1012050

Edible offals (other than liver and kidney)

1012990

Others

1013000

(c)

sheep

1013010

Muscle

1013020

Fat tissue

1013030

Liver

1013040

Kidney

1013050

Edible offals (other than liver and kidney)

1013990

Others

1014000

goat

1014010

Muscle

1014020

Fat tissue

1014030

Liver

1014040

Kidney

1014050

Edible offals (other than liver and kidney)

1014990

Others

1015000

(e)

equine

1015010

Muscle

1015020

Fat tissue

1015030

Liver

1015040

Kidney

1015050

Edible offals (other than liver and kidney)

1015990

Others

1016000

(f)

poultry

1016010

Muscle

1016020

Fat tissue

1016030

Liver

1016040

Kidney

1016050

Edible offals (other than liver and kidney)

1016990

Others

1017000

(g)	other farmed terrestrial animals

1017010

Muscle

1017020

Fat tissue

1017030

Liver

1017040

Kidney

1017050

Edible offals (other than liver and kidney)

1017990

Others

1020000

Milk

1020010

Cattle

1020020

Sheep

1020030

Goat

1020040

Horse

1020990

Others

1030000

Birds eggs

1030010

Chicken

1030020

Duck

1030030

Geese

1030040

Quail

1030990

Others

1040000

Honey and other apiculture products

1050000

Amphibians and Reptiles

1060000

Terrestrial invertebrate animals

1070000

Wild terrestrial vertebrate animals

(**)	Pesticide-code combination for which the MRL as set in Annex III Part B applies.

Dimethoate

(+)

The European Food Safety Authority identified some information on toxicological data of plant metabolites as unavailable. When re-viewing the MRL, the Commission will take into account the information referred to in the first sentence, if it is submitted by 27 June 2019, or, if that information is not submitted by that date, the lack of it.

0110010	Grapefruits
0110020	Oranges
0110030	Lemons
0110040	Limes
0110050	Mandarins
0140020	Cherries (sweet)
0161030	Table olives
0213010	Beetroots
0213020	Carrots

(+)

The European Food Safety Authority identified some information on toxicological data of plant metabolites and residue trials as unavailable. When re-viewing the MRL, the Commission will take into account the information referred to in the first sentence, if it is submitted by 27 June 2019, or, if that information is not submitted by that date, the lack of it.

0213030	Celeriacs/turnip rooted celeries
0213040	Horseradishes
0213060	Parsnips
0213070	Parsley roots/Hamburg roots parsley
0213080	Radishes
0213090	Salsifies
0213100	Swedes/rutabagas
0213110	Turnips

(+)

0220010	Garlic
0220020	Onions
0220030	Shallots

(+)

0220040

Spring onions/green onions and Welsh onions

(+)

0231010	Tomatoes
0231030	Aubergines/eggplants
0233020	Pumpkins
0233030	Watermelons
0241010	Broccoli
0241020	Cauliflowers
0242010	Brussels sprouts
0242020	Head cabbages

(+)

0251020	Lettuces
0270010	Asparagus

(+)

0300030	Peas
0402010	Olives for oil production

(+)

0500010	Barley
0500050	Oat

(+)

0500070

Rye

(+)

0500090

Wheat

(+)

The European Food Safety Authority identified some information on monitoring data as unavailable. When re-viewing the MRL, the Commission will take into account the information referred to in the first sentence, if it is submitted by 27 June 2019, or, if that information is not submitted by that date, the lack of it.

0631030

Rose

(+)

The applicable maximum residue level for horseradish (Armoracia rusticana) in the spice group (code 0840040 ) is the one set for horseradish (Armoracia rusticana) in the Vegetables category, root and tuber vegetables group (code 0213040 ) taking into account changes in the levels by processing (drying) according to Art. 20 (1) of Regulation (EC) No 396/2005.

0840040

Horseradish

(+)

0900010	Sugar beet roots
0900030	Chicory roots’

(2)

in Annex II, the following column for omethoate is added:

‘Pesticide residues and maximum residue levels (mg/kg)

Code number

Groups and examples of individual products to which the MRLs apply (2)

Omethoate

(1)

(2)

(3)

0100000

FRUITS, FRESH or FROZEN; TREE NUTS

0110000

Citrus fruits

0,01 (*2)

0110010

Grapefruits

(+)

0110020

Oranges

(+)

0110030

Lemons

(+)

0110040

Limes

(+)

0110050

Mandarins

(+)

0110990

Others

0120000

Tree nuts

0,01 (*2)

0120010

Almonds

0120020

Brazil nuts

0120030

Cashew nuts

0120040

Chestnuts

0120050

Coconuts

0120060

Hazelnuts/cobnuts

0120070

Macadamias

0120080

Pecans

0120090

Pine nut kernels

0120100

Pistachios

0120110

Walnuts

0120990

Others

0130000

Pome fruits

0,01 (*2)

0130010

Apples

0130020

Pears

0130030

Quinces

0130040

Medlars

0130050

Loquats/Japanese medlars

0130990

Others

0140000

Stone fruits

0140010

Apricots

0,01 (*2)

0140020

Cherries (sweet)

0,2 (+)

0140030

Peaches

0,01 (*2)

0140040

Plums

0,01 (*2)

0140990

Others

0,01 (*2)

0150000

Berries and small fruits

0,01 (*2)

0151000

(a)

grapes

0151010

Table grapes

0151020

Wine grapes

0152000

(b)	strawberries

0153000

(c)	cane fruits

0153010

Blackberries

0153020

Dewberries

0153030

Raspberries (red and yellow)

0153990

Others

0154000

(d)	other small fruits and berries

0154010

Blueberries

0154020

Cranberries

0154030

Currants (black, red and white)

0154040

Gooseberries (green, red and yellow)

0154050

Rose hips

0154060

Mulberries (black and white)

0154070

Azaroles/Mediterranean medlars

0154080

Elderberries

0154990

Others

0160000

Miscellaneous fruits with

0161000

(a)	edible peel

0161010

Dates

0,01 (*2)

0161020

Figs

0,01 (*2)

0161030

Table olives

1,5 (+)

0161040

Kumquats

0,01 (*2)

0161050

Carambolas

0,01 (*2)

0161060

Kaki/Japanese persimmons

0,01 (*2)

0161070

Jambuls/jambolans

0,01 (*2)

0161990

Others

0,01 (*2)

0162000

(b)	inedible peel, small

0,01 (*2)

0162010

Kiwi fruits (green, red, yellow)

0162020

Litchis/lychees

0162030

Passionfruits/maracujas

0162040

Prickly pears/cactus fruits

0162050

Star apples/cainitos

0162060

American persimmons/Virginia kaki

0162990

Others

0163000

(c)	inedible peel, large

0,01 (*2)

0163010

Avocados

0163020

Bananas

0163030

Mangoes

0163040

Papayas

0163050

Granate apples/pomegranates

0163060

Cherimoyas

0163070

Guavas

0163080

Pineapples

0163090

Breadfruits

0163100

Durians

0163110

Soursops/guanabanas

0163990

Others

0200000

VEGETABLES, FRESH or FROZEN

0210000

Root and tuber vegetables

0211000

(a)

potatoes

0,01 (*2)

0212000

(b)	tropical root and tuber vegetables

0,01 (*2)

0212010

Cassava roots/manioc

0212020

Sweet potatoes

0212030

Yams

0212040

Arrowroots

0212990

Others

0213000

(c)	other root and tuber vegetables except sugar beets

0213010

Beetroots

0,01 (*2) (+)

0213020

Carrots

0,02 (+)

0213030

Celeriacs/turnip rooted celeries

0,02 (+)

0213040

Horseradishes

0,02 (+)

0213050

Jerusalem artichokes

0,01 (*2)

0213060

Parsnips

0,02 (+)

0213070

Parsley roots/Hamburg roots parsley

0,02 (+)

0213080

Radishes

0,02 (+)

0213090

Salsifies

0,02 (+)

0213100

Swedes/rutabagas

0,02 (+)

0213110

Turnips

0,02 (+)

0213990

Others

0,01 (*2)

0220000

Bulb vegetables

0220010

Garlic

0,01 (*2) (+)

0220020

Onions

0,01 (*2) (+)

0220030

Shallots

0,01 (*2) (+)

0220040

Spring onions/green onions and Welsh onions

0,2 (+)

0220990

Others

0,01 (*2)

0230000

Fruiting vegetables

0,01 (*2)

0231000

(a)

solanacea

0231010

Tomatoes

(+)

0231020

Sweet peppers/bell peppers

0231030

Aubergines/eggplants

(+)

0231040

Okra/lady's fingers

0231990

Others

0232000

(b)	cucurbits with edible peel

0232010

Cucumbers

Choose the experimental features you want to try