This document is an excerpt from the EUR-Lex website
Noise emission by equipment used outdoors
WHAT IS THE AIM OF THE DIRECTIVE?
It aims to:
It repeals and replaces 9 legal instruments on noise emissions for each type of construction plant and equipment, as well as Directive 84/538/EEC on lawnmowers.
The directive’s purpose is four-fold:
The following types of equipment are excluded:
EU countries are responsible for verifying that the rules laid down by the directive are being applied. Annexes V to VIII contains the various conformity assessment procedures to be used.
The manufacturer or the person placing the equipment on the market or putting it into service must ensure (Articles 4 and 8) that:
Where an EU country ascertains that equipment does not comply with these conditions, it must withdraw it from the market or prohibit its use.
Labelling is compulsory for all items of equipment covered by the directive and must include:
The noise emission limits laid down for certain types of equipment involved 2 stages, so as to enable businesses to adapt to the new regulations. The emission limits for stage 1 took effect 2 years after the directive’s entry into force and more stringent limits entered into force in 2006.
EU countries may set up notified bodies which are responsible for monitoring the noise emission limits applicable to the equipment. These monitoring controls apply both to the equipment design phase and the equipment production phase. It should be noted, however, that it is not necessary to monitor the design of equipment that is subject only to compulsory marking.
With a view to assessing the impact of the directive, a procedure for the collection of noise emission data was established. This information serves as the basis for customers to choose less noisy equipment and for devising economic incentives and awards. Manufacturers or their authorised representatives are required to send to the relevant authorities in EU countries, as well as to the European Commission, a copy of the EC declaration of conformity for equipment placed on the market.
The directive has 24 articles and 10 annexes covering:
Possible revisions to the legislation
An evaluation and impact assessment study of Directive 2000/14/EC has been ongoing since May 2017. Its results, as well as previously completed studies, will be used by the Commission as the basis for the upcoming revision process of EU legislation in this field. A public consultation was launched in January 2018 and ran until April 2018.
FROM WHEN DOES THE DIRECTIVE APPLY?
It has applied since 3 January 2002 and had to become law in the EU countries by 3 July 2001.
For more information, see:
Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000 on the approximation of the laws of the Member States relating to the noise emission in the environment by equipment for use outdoors (OJ L 162, 3.7.2000, pp. 1-78)
Successive amendments to Directive 2000/14/EC have been incorporated in the original text. This consolidated version is of documentary value only.
Commission Recommendation of 6 August 2003 concerning the guidelines on the revised interim computation methods for industrial noise, aircraft noise, road traffic noise and railway noise, and related emission data (OJ L 212, 22.8.2003, pp. 49-64)
Directive 2002/49/EC of the European Parliament and of the Council of 25 June 2002 relating to the assessment and management of environmental noise — Declaration by the Commission in the Conciliation Committee on the Directive relating to the assessment and management of environmental noise (OJ L 189, 18.7.2002, pp. 12-25)
See consolidated version.
last update 19.07.2018