EUR-Lex Access to European Union law
This document is an excerpt from the EUR-Lex website
Document 52013PC0477
Proposal for a COUNCIL IMPLEMENTING REGULATION amending Regulation (EU) No 405/2011 imposing a definitive countervailing duty and collecting definitively the provisional duty imposed on imports of certain stainless steel bars and rods originating in India
Proposal for a COUNCIL IMPLEMENTING REGULATION amending Regulation (EU) No 405/2011 imposing a definitive countervailing duty and collecting definitively the provisional duty imposed on imports of certain stainless steel bars and rods originating in India
Proposal for a COUNCIL IMPLEMENTING REGULATION amending Regulation (EU) No 405/2011 imposing a definitive countervailing duty and collecting definitively the provisional duty imposed on imports of certain stainless steel bars and rods originating in India
/* COM/2013/0477 final - 2013/0223 (NLE) */
Proposal for a COUNCIL IMPLEMENTING REGULATION amending Regulation (EU) No 405/2011 imposing a definitive countervailing duty and collecting definitively the provisional duty imposed on imports of certain stainless steel bars and rods originating in India /* COM/2013/0477 final - 2013/0223 (NLE) */
EXPLANATORY MEMORANDUM Context of the proposal || Grounds for and objectives of the proposal This proposal concerns the application of Council Regulation (EC) No 597/2009 of 11 June 2009 on protection against subsidised imports from countries not members of the European Community ('the basic Regulation') in the anti-subsidy proceeding concerning imports of certain stainless steel bars and rods originating in India. || General context This proposal is made in the context of the implementation of the basic Regulation and is the result of an investigation which was carried out in line with the substantive and procedural requirements laid out in the basic Regulation. || Existing measures in the area of the proposal Council Regulation (EU) No 405/2011 imposing a definitive countervailing duty and collecting definitively the provisional duty imposed on imports of certain stainless steel bars and rods originating in India. || Consistency with the other policies and objectives of the Union Not applicable. Consultation of interested parties and impact assessment || Consultation of interested parties || Interested parties concerned by the proceeding have had the possibility to defend their interests during the investigation, in line with the provisions of the basic Regulation. || Collection and use of expertise || There was no need for external expertise. || Impact assessment This proposal is the result of the implementation of the basic Regulation. The basic Regulation does not provide for a general impact assessment but contains an exhaustive list of conditions that have to be assessed. Legal elements of the proposal || Summary of the proposed action On 9 August 2012, the Commission initiated a partial interim review limited to the level of subsidisation of the countervailing duty in force in respect of imports of certain stainless steel bars and rods originating in India. The review was initiated because the applicant, an exporting producer in India, provided sufficient prima facie evidence - that the circumstances with regard to subsidisation on the basis of which measures were established have changed and that these changes are of a lasting nature. The partial interim review investigation confirmed that (i) the level of subsidisation with regard to the concerned co-operating Indian producer has decreased; (ii) the actual modalities of the investigated schemes and their countervailiability have not changed with respect to the previous investigation. Since it was demonstrated that the applicant current level of subsidization is below de minimis, the level of the measures should be amended to reflect the new findings. The changed circumstances were found to be of a lasting nature. Therefore, it is proposed that the Council adopts the attached proposal for a Regulation so as to amend the duty rate applicable to the concerned co-operating Indian producer. || Legal basis Council Regulation (EC) No 597/2009 of 11 June 2009 on protection against subsidised imports from countries not members of the European Community. || Subsidiarity principle The proposal falls under the exclusive competence of the Union. The subsidiarity principle therefore does not apply. || Proportionality principle The proposal complies with the proportionality principle because the form of action is described in the above-mentioned basic Regulation and leaves no scope for national decision. An indication of how financial and administrative burden falling upon the Union, national governments, regional and local authorities, economic operators and citizens is minimized and proportionate to the objective of the proposal is not applicable. || Choice of instruments || Proposed instruments: regulation. || Other means would not be adequate because the basic Regulation does not provide for alternative options. Budgetary implication || The proposal has no implication for the Union budget. 2013/0223 (NLE) Proposal for a COUNCIL IMPLEMENTING REGULATION amending Regulation (EU) No 405/2011
imposing a definitive countervailing duty and collecting definitively the
provisional duty imposed on imports of certain stainless steel bars and rods
originating in India THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the
Functioning of the European Union, Having regard to Council Regulation (EC) No
597/2009 of 11 June 2009 on protection against subsidised imports from
countries not members of the European Community[1] (‘the
basic Regulation’), and in particular Article 19 thereof, Having regard to the proposal submitted by
the European Commission (‘the Commission’) after consulting the Advisory
Committee, Whereas: 1. PROCEDURE 1.1. Previous
investigation and existing countervailing measures (1) In April 2011, by Regulation (EU) No 405/2011[2] (‘the definitive
Regulation’), the Council imposed a definitive countervailing duty on imports
of certain stainless steel bars and rods ('SSB') currently falling within
CN codes 7222 20 21, 7222 20 29, 7222 20 31, 7222 20 39, 7222 20 81 and 7222 20
89 and originating in India. The investigation, which led to the adoption of the
definitive Regulation, is hereinafter referred to as 'the original
investigation'. (2) The
definitive measures consisted of ad valorem countervailing duties,
ranging between 3.3% and 4.3% imposed on imports from individually named
exporters, a 4.0% duty rate imposed on non-sampled cooperating companies and a
residual duty rate of 4.3% imposed on all other companies in India. 1.2. Initiation
of a partial interim review (3) A
request for a partial interim review was lodged by Viraj Profiles Vpl. Ltd., an
exporting producer located in India ('the applicant'). The request was limited
in scope to the examination of subsidisation as far as the applicant was concerned.
The applicant had provided prima facie evidence that the circumstances with
regard to subsidisation on the basis of which measures were imposed have
changed significantly and that these changes are of a lasting nature. (4) Having
determined, after consulting the Advisory Committee, that sufficient evidence
existed to justify the initiation of a partial interim review, the Commission
announced on 9 August 2012, by a notice published in the Official Journal of
the European Union[3]
('notice of initiation'), the initiation of a partial interim review, in
accordance with Article 19 of the basic Regulation, limited to the examination
of subsidisation in respect of the applicant. 1.3. Review
investigation period (5) The
review investigation of subsidisation covered the period from 1 July 2011 to 30
June 2012 ('the review investigation period' or 'RIP'). 1.4. Parties
concerned by the investigation (6) The
Commission officially informed the applicant, the Government of India (‘the GOI’) and EUROFER as the representative of the Union industry in the original
investigation ('the Union industry'), of the initiation of the partial interim
review investigation. Interested parties were given the opportunity to make
their views known in writing and to request a hearing within the time limit set
out in the notice of initiation. (7) The
written and oral comments submitted by the parties at the stage of initiation were
considered and, where appropriate, taken into account. (8) In
order to obtain the information necessary for its investigation, the Commission
sent a questionnaire to the applicant. In addition, a questionnaire was sent to
the GOI. (9) Replies
to the questionnaire were received from the applicant and from the GOI. (10) The
Commission sought and verified all information it deemed necessary for the
determination of subsidisation. Verification visits were carried out at the premises
of the applicant. 2. PRODUCT
CONCERNED (11) The
product under review is the same product as the one defined in the original
investigation, namely stainless steel bars and rods, not further worked than
cold-formed or cold finished, other than bars and rods of circular
cross-section of a diameter of 80 mm or more, currently falling within CN codes
7222 20 21, 7222 20 29, 7222 20 31, 7222 20 39, 7222 20 81 and 7222 20 89 and originating
in India. 3. SUBSIDISATION 3.1. Introduction
(12) On
the basis of the information submitted by the GOI and interested parties and
the replies to the Commission’s questionnaire, the following schemes allegedly used
by applicant were investigated: (a)
Export Promotion Capital Goods Scheme (EPCGS); (b)
Export Oriented Units Scheme (EOU); (c)
Export Credit Scheme (ECS); (13) Schemes (a) and (b) are
based on the Foreign Trade (Development and Regulation) Act 1992 (No 22 of
1992) which entered into force on 7 August 1992 ('Foreign Trade Act'). The
Foreign Trade Act authorises the GOI to issue notifications regarding the
export and import policy. These are summarised in a document called 'Foreign
Trade Policy' documents, issued by the Ministry of Commerce every five years
and updated regularly. The Foreign Trade Policy document relevant to the RIP is
the “Foreign Trade Policy 2009-2014” (‘FTP 09-14). In addition, the GOI also
sets out the procedures governing the FTP 09-14 in a 'Handbook of Procedures,
Volume I' ('HOP I 09-14'). The Handbook of Procedures is updated on a regular
basis. (14) The ECS scheme specified
under (c) is based on sections 21 and 35A of the Banking Regulation Act 1949,
which allows the Reserve Bank of India to direct commercial banks in the field
of export credits. (15) Furthermore,
following the allegation of the Union industry, the Commission investigated
whether the applicant: (a)
was benefiting from the Electricity Duty
Exemption Scheme (EDES) (b)
was using local subsidy programmes of the State
of Maharashtra, (c)
was benefiting from provisions of inputs for
less than adequate remuneration, (d)
was benefiting from incentives related to power
generation and distribution, (e)
was benefiting from purchases of cheap raw
materials from related off-shore companies. (16) Finally, the Commission verified
that the following schemes investigated in the original investigation: (a)
Duty Entitlement
Passbook Scheme (DEPBS) (b)
Advanced Authorization Scheme (AAS) are still not being used by the applicant. 3.2. Findings 3.2.1. Export Promotion Capital
Goods Scheme (17) The investigation revealed
that the applicant used this scheme during the RIP. However, it was found that
the incentives received were insignificant at 0.02%. Therefore, it was
considerated that it was not necessary to further evaluate the
countervailability of this scheme. 3.2.2. Export Oriented Unit Scheme (18) It was found that the
applicant had the status of EOU and received the subsidies under this scheme in
the RIP. (19) With regard to this scheme
the company claimed that the Commission should deviate from the method of
calculation of the benefit received under EOU used in the original
investigation. The company argued that certain benefits under EOU scheme should
be treated as a permissible duty drawback scheme within the meaning of Annex II
and III of the basic Regulation and therefore they should not be
countervailable. (20) However, since it was found
that regardless of which method of calculation will be used, the subsidy rate
established with respect to this scheme will not exceed 0.22%, leading to an overall
subsidy margin below de minimis level, it was decided not to analyze
further this claim in the context of this review investigation. 3.2.3. Export Credits Scheme (21) It was found that the
applicant was not using this scheme in the RIP. 3.2.4. Electricity Duty Exemption
Scheme (22) The investigation revealed
that the applicant used this scheme during the RIP. However, it was found that
the incentives received were insignificant. Therefore, it was considerated that
it was not necessary to further evaluate the countervailability of this scheme.
3.2.5. Local Subsidy Programs of
the State of Maharashtra (23) It was found that the
applicant was not using this scheme in the RIP. 3.2.6. Others (24) The investigation did not
reveal any other benefits for the applicant in the RIP related to the terms of
raw materials and energy purchases which would involve a financial contribution
of the GOI and could therefore be treated as subsidies within the meaning of
Article 3(1)(a)(ii) and Article 3(2) of the basic Regulation. Therefore, the
allegations of the Union industry listed in the recital (15) points c-e were
found irrelevant in the context of this review. 4. AMOUNT
OF COUNTERVAILABLE SUBSIDIES (25) It
is recalled that the original investigation established the amount of countervailable
subsidies for the applicant, expressed ad valorem, at 4.3%. (26) During
the RIP, the amount of countervailable subsidies for the applicant, expressed ad
valorem, resulting from only one subsidy scheme, was found to be 0.22%. (27) Account
taken of the above, it is concluded that the level of subsidisation with regard
to the applicant exporting producer concerned has decreased. (28) It
was also examined whether the changed circumstances with regard to the examined
schemes could be considered to be of a lasting nature. (29) As
mentioned above, the findings with regard to the EPCGS scheme during this
interim review confirmed the findings of the original investigation where the
subsidy granted under this scheme was found to be insignificant. (30) Moreover,
while in the original investigation the main benefit to the applicant was
conferred under the EOU scheme, the benefit under this scheme has dropped
during the RIP. Evidence has been obtained that this change is of a lasting
nature as it relates to the decreased level of customs tariffs on stainless
steel scrap and ferro-nickel, two main raw materials used by the applicant for
the production of the product concerned. 5. COUNTERVAILING
MEASURES (31) On the basis of the above there are indications that the applicant
will continue to receive subsidies in the future of an amount which is below the
de minimis level. Hence, it is considered appropriate to amend the
countervailing duty rate applicable to the applicant in order to reflect the
current level of subsidisation. Such duty rate is established at 0% for the
applicant. (32) With
regard to the rate of duty currently applicable to imports of the product
concerned from exporting producers listed in the Annex to the definitive
Regulation, it is noted that the actual modalities of the investigated schemes
and their countervailability have not changed with respect to the previous
investigation. Thus there is no reason to re-calculate the subsidy and duty
rates of these companies. Consequently, the rates of the duty applicable to the
companies listed in Annex to the definitive Regulation remain unchanged. (33) With
regard to all other companies’ duty rate, it is noted that in the original
investigation its level was set at the level of the highest individual subsidy
margin found for the sampled companies. That corresponded to the subsidy margin
of the applicant. Given that the margin of the applicant has changed following
this interim review, the all other companies rate should be revised and set at
the next highest subsidy margin. Since, the next highest rate is the one
applicable to the companies listed in the Annex, the rate of duty for the all
other companies is set at this level, i.e. 4%. 6. DISCLOSURE (34) The
GOI and the other interested parties were informed of the essential facts and
considerations upon which it was intended to propose to amend the duty rate
applicable to the applicant. (35) The
written and oral comments submitted by the parties were considered and, where
appropriate, taken into account. (36) All
interested parties, who so requested and showed that there were particular
reasons why they should be heard, were granted a hearing. HAS ADOPTED THIS REGULATION: Article 1 Article 1(2) of Council Implementing Regulation
(EU) No 405/2011 shall be replaced by the following: "2. The rate of the definitive
countervailing duty applicable to the net, free-at-Union-frontier price, before
duty, of the product described in paragraph 1 and manufactured by the companies
below shall be: Company || Duty (%) || TARIC additional code Chandan Steel Ltd., Mumbai || 3,4 || B002 Venus Wire Industries Pvt. Ltd, Mumbai; Precision Metals, Mumbai; Hindustan Inox Ltd., Mumbai; Sieves Manufacturer India Pvt. Ltd., Mumbai || 3,3 || B003 Viraj Profiles Vpl. Ltd, Thane || 0 || B004 Companies listed in the Annex || 4,0 || B005 All other companies || 4,0 || B999 Article 2 This Regulation
shall enter into force on the day following its publication in the Official
Journal of the European Union. This Regulation shall be binding
in its entirety and directly applicable in all Member States. Done at Brussels, For
the Council The
President [1] OJ L 188, 18.7.2009, p. 93. [2] OJ L 108, 28.4.2011, p. 3. [3] OJ C 239, 9.8.2012, p. 2.