EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 32020R0874

Council Regulation (EU) 2020/874 of 15 June 2020 amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

ST/7812/2020/INIT

OJ L 204, 26.6.2020, p. 18–33 (BG, ES, CS, DA, DE, ET, EL, EN, FR, GA, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

In force

ELI: http://data.europa.eu/eli/reg/2020/874/oj

26.6.2020   

EN

Official Journal of the European Union

L 204/18


COUNCIL REGULATION (EU) 2020/874

of 15 June 2020

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)

In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances in the market for those products, Common Customs Tariff (CCT) duties of the type referred to in Article 56(2)(c) of Regulation (EU) No 952/2013 of the European Parliament and of the Council (1) (‘CCT duties’) on those products have been suspended by Council Regulation (EU) No 1387/2013 (2). Those products can be imported into the Union at reduced or zero duty rates.

(2)

The Union production of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to grant a total suspension of the CCT duties on those products.

(3)

With a view to promoting integrated battery production in the Union in accordance with the communication from the Commission of 17 May 2018 entitled ‘Europe on the Move – Sustainable Mobility for Europe: safe, connected, and clean’, a partial suspension of the CCT duties should be granted in respect of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013. In addition, only a partial suspension of the CCT duties should be granted in respect of certain products that are currently subject to complete suspensions. The date for the mandatory review of those suspensions should be 31 December 2020 in order for that review to have regard to the evolution of the battery sector in the Union.

(4)

In respect of the products on the candidate list referred to in Article 59 of Regulation (EC) No 1907/2006 of the European Parliament and of the Council (3), only a partial suspension of the CCT duties should be granted. The date for the mandatory review of those suspensions should be 31 December 2021, in order to allow economic operators to replace such products with alternatives.

(5)

It is necessary to amend the product description, classification and end-use requirement for certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends in the market.

(6)

It is no longer in the interest of the Union to maintain suspensions of CCT duties for certain products listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be withdrawn.

(7)

Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(8)

In order to avoid any interruption of the application of the autonomous suspension scheme and to comply with the guidelines in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the suspensions for the products concerned should apply from 1 July 2020. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1387/2013 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 July 2020.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 15 June 2020.

For the Council

The President

A. METELKO-ZGOMBIĆ


(1)  Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).

(2)  Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201).

(3)  Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1).


ANNEX

The Annex to Regulation (EU) No 1387/2013 is amended as follows:

(1)

all asterisks (*) and the related endnote containing the text ‘A newly introduced measure or a measure with amended conditions. Where more than one CN code is listed as falling within the scope of the measure, the asterisk concerns the entire measure.’ are deleted;

(2)

the entries with the serial numbers 0.2706, 0.2972, 0.3650, 0.3886, 0.3894, 0.3895, 0.4004, 0.4039, 0.4177, 0.4647, 0.4648, 0.4751, 0.5504, 0.5615, 0.5929, 0.6601, 0.6745, 0.7784 and 0.7803 are deleted;

(3)

the following entries replace those entries that have the same serial numbers:

Serial number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

‘0.7288

ex 2841 50 00

11

Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more

2 %

-

31.12.2021

0.3419

ex 2850 00 20

80

Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more

0 %

-

31.12.2024

0.2583

ex 2903 89 80

45

1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16 , 9.02 , 13.05 ,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more

2 %

-

31.12.2021

0.2942

ex 2919 90 00

35

2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) with a purity by weight of 95 % or more, with particles greater than 100 μm used in the manufacture of nucleating agents with a particle size (D90) no greater than 35 μm as measured by a light scattering technique (1)

0 %

-

31.12.2023

0.5037

ex 2922 49 85

17

Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)

0 %

-

31.12.2020

0.3689

ex 2924 19 00

23

Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more

2 %

-

31.12.2021

0.6259

ex 2926 90 70

26

Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products (1)

0 %

-

31.12.2024

0.2656

ex 2931 39 90

38

N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more

0 %

-

31.12.2024

0.7811

ex 2933 19 90

33

Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine (1)

0 %

-

31.12.2024

0.4346

ex 2934 20 80

25

1,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one

0 %

-

31.12.2022

0.5134

ex 3204 11 00

45

Preparation of dispersion dyes, containing:

C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),

C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),

C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),

whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)

0 %

-

31.12.2020

0.7318

ex 3603 00 60

10

Igniters for gas generators with an overall maximum length of 20,34 mm or more but not more than 29,4 mm and a pin length of 6,68 mm (±0,3 mm) or more but not more than 7,54 mm (±0,3 mm)

0 %

-

31.12.2022

0.5718

ex 3811 21 00

85

Additives:

containing more than 20 % or more but not more than 45 % by weight of mineral oils,

based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,

for use in the manufacture of blends of additives (1)

0 %

-

31.12.2022

0.7512

ex 3811 29 00

18

Additives consisting of dihydroxy butanedioic acid – (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, for use in the manufacture of engine oils (1)

0 %

-

31.12.2023

0.3069

ex 3824 99 92

88

2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)

0 %

-

31.12.2020

0.4719

ex 3824 99 93

35

Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)

0 %

-

31.12.2024

0.6953

ex 3901 40 00

20

Octene linear low-density polyethylene (LLDPE) in the form of pellets with:

10 % or more but not more than 20 % by weight of octene,

a melt flow ratio of 9,0 or more, but not more than 10,0 (using ASTM D1238 10,0/2,16),

a melt index (190 °C/2,16 kg) of 0,4 g/10 min or more but not more than 0,6 g/10 min,

a density of 0,909 g/cm3 or more, but not more than 0,913 g/cm3 using ASTM D4703,

a gel area per 24,6 cm3 of not more than 20 mm2, and

an anti-oxidant level of not more than 240 ppm

0 %

m3

31.12.2020

0.5161

ex 3919 10 80

ex 3919 90 80

70

75

Rolls of polyethylene foil:

self-adhesive on one side,

of a total thickness of 0,025 mm or more, but not more than 0,09 mm,

of a total width of 60 mm or more, but not more than 1 110 mm,

for use in the manufacture of products of Headings 8521 or 8528 for protection purposes (1)

0 %

-

31.12.2021

0.4947

ex 3919 90 80

65

Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner

0 %

-

31.12.2024

0.3241

ex 3920 10 25

30

Mono-layered high-density polyethylene film:

containing by weight 99 % or more of polyethylene,

with a thickness of 12 μm or more but not more than 20 μm,

with a length of 4 000 m or more but not more than 7 000 m,

with a width of 600 mm or more but not more than 900 mm

0 %

-

31.12.2023

0.3312

ex 3921 90 60

35

Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells (1)

0 %

-

31.12.2023

0.6708

ex 4009 42 00

20

Rubber brake hose with:

textile strings,

a wall thickness of 3,2 mm,

a metal hollow terminal pressed on both ends, and

one or more mounting brackets,

for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2024

0.7372

ex 5311 00 90

10

Plain-woven fabric of paper yarns glued on a tissue paper layer:

with a weight of 190 g/m2 or more but not more than 280 g/m2, and

cut into rectangles with a side length of 40 cm or more but not more than 140 cm

0 %

-

31.12.2022

0.2546

ex 6903 90 90

30

Silicon carbide reactor tubes and holders having a softening point of 1 400 °C or higher

0 %

-

31.12.2023

0.7619

ex 7006 00 90

40

Plates of sodalime glass of STN (Super Twisted Nematic) quality having:

a length of 300 mm or more but not more than 1 500 mm,

a width of 300 mm or more but not more than 1 500 mm,

a thickness of 0,5 mm or more but not more than 1,1 mm,

an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,

with or without a multilayer anti-reflection-coating on the other side and machined (chamfered) edges

0 %

-

31.12.2023

0.7341

ex 7413 00 00

20

Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed

0 %

-

31.12.2022

0.3928

ex 7616 99 90

15

Honeycomb aluminium blocks for use in the manufacture of aircraft parts (1)

0 %

p/st

31.12.2023

0.6730

ex 8101 96 00

10

Tungsten wire containing by weight 99 % or more of tungsten with:

a maximum cross-sectional dimension of not more than 50 μm,

a resistance of 40 Ω or more but not more than 300 Ω at length of 1 m

0 %

-

31.12.2020

0.5838

ex 8105 90 00

10

Bars or wires made of cobalt alloy containing by weight:

35 % (± 2 %) cobalt,

25 % (± 1 %) nickel,

19 % (± 1 %) chromium, and

7 % (± 2 %) iron,

conforming to the material specifications AMS 5842

0 %

-

31.12.2023

0.5570

ex 8207 30 10

10

Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles (1)

0 %

p/st

31.12.2022

0.5024

ex 8301 60 00

ex 8419 90 85

ex 8479 90 70

ex 8481 90 00

ex 8503 00 99

ex 8515 90 80

ex 8537 10 98

ex 8538 90 99

ex 8708 99 10

ex 8708 99 97

30

40

30

50

43

40

55

70

55

22

Silicone or plastic keyboards, comprising:

parts of common metal, and

whether or not comprising parts of plastic,

epoxy resin reinforced with fibreglass or wood,

whether or not printed or surface-treated,

with or without electrical conductors,

with or without a membrane bonded to the keyboard,

with or without mono or multilayer protective film

0 %

p/st

31.12.2020

0.7670

ex 8409 91 00

25

Air intake module for engine cylinders consisting of:

a suction pipe,

a pressure sensor,

an electric throttle,

hoses,

brackets,

for use in the manufacture of engines of motor vehicles (1)

0 %

-

31.12.2023

0.7718

ex 8409 99 00

75

High pressure fuel rail of galvanised ferrite-pearlite steel with:

at least one pressure sensor and one valve,

a length of 314 mm or more, but not more than 322 mm,

an operating pressure not more than 225 MPa,

an inlet temperature not more than 95 °C,

ambient temperature of – 45 °C or more, but not more than 145 °C,

for use in the manufacture of compression ignition engines of motor vehicles (1)

0 %

-

31.12.2024

0.7377

ex 8481 80 59

40

Flow-control valve:

made of steel,

with an outlet hole with a diameter of 0,05 mm or more, but not more than 0,5 mm,

with an inlet hole with a diameter of 0,1 mm or more, but not more than 1,3 mm,

with chromium nitride coating,

with a surface roughness of Rp 0,4

0 %

-

31.12.2022

0.7381

ex 8481 80 59

50

Electromagnetic valve for quantity control with:

a plunger,

a solenoid with a of coil resistance of 1,85 Ω or more, but not more than 8,2 Ω

0 %

-

31.12.2022

0.7604

ex 8484 20 00

20

Mechanical face sealing device made of two movable rings (one ceramic mating with a thermal conductivity lower than 80 W/mK and the other carbon sliding), one spring and a nitrile sealant on the external side

0 %

-

31.12.2023

0.5577

ex 8501 31 00

50

DC motors, brushless, with:

an external diameter of 80 mm or more, but not more than 200 mm,

a supply voltage of 9 V or more, but not more than 16 V,

an output at 20 °C of 300 W or more, but not more than 750 W,

a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,

a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm,

with or without a rotor angle position sensor of resolver type or Hall effect type,

with or without a pulley,

of the kind used in power steering systems for cars

0 %

-

31.12.2022

0.4855

ex 8501 33 00

ex 8501 40 80

ex 8501 53 50

30

50

10

Electric drive for motor vehicles, with an output of not more than 315 kW:

with an AC or DC motor with or without transmission,

with or without power electronics

0 %

-

31.12.2021

0.5783

ex 8503 00 99

40

Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, for use in the manufacture of fuel cells in Heading 8501 (1)

0 %

p/st

31.12.2022

0.7029

ex 8505 11 00

47

Articles in the form of a triangle, square or rectangle, whether or not arched or with rounded corners, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with the following dimensions:

a length of 9 mm or more but not more than 105 mm,

a width of 5 mm or more but not more than 105 mm, and

a height of 2 mm or more but not more than 55 mm

0 %

-

31.12.2021

0.7511

ex 8505 19 90

60

Articles of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve, or with rounded corners, intended to become permanent magnets after magnetisation, with the following dimensions:

a length of 10 mm or more but not more than 100 mm (± 1 mm),

a width of 10 mm or more but not more than 100 mm (± 1 mm),

a thickness of 2 mm or more but not more than 15 mm (±0,15 mm)

0 %

-

31.12.2023

0.6703

ex 8507 60 00

33

Lithium-ion accumulator, with:

a length of 150 mm or more, but not more than 1 000 mm,

a width of 100 mm or more, but not more than 1 000 mm,

a height of 200 mm or more, but not more than 1 500 mm,

a weight of 75 kg or more, but not more than 200 kg,

a nominal capacity of 150 Ah or more, but not more than 500 Ah,

a nominal output voltage of 230 V AC (Line to neutral) or a nominal voltage of 64 V (± 10 %)

1,3 %

-

31.12.2020

0.6702

ex 8507 60 00

37

Lithium-ion accumulator, with:

a length of 1 200 mm or more, but not more than 2 000 mm,

a width of 800 mm or more, but not more than 1 300 mm,

a height of 2 000 mm or more, but not more than 2 800 mm,

a weight of 1 800 kg or more, but not more than 3 000 kg,

a nominal capacity of 2 800 Ah or more, but not more than 7 200 Ah

1,3 %

-

31.12.2020

0.5342

ex 8507 60 00

65

Cylindrical lithium ion cell with:

3,5 VDC to 3,8 VDC,

300 mAh to 900 mAh, and

a diameter of 10,0 mm to 14,5 mm

1,3 %

-

31.12.2021

0.6753

ex 8507 60 00

77

Lithium-ion rechargeable batteries, with:

a length of 700 mm or more, but not more than 2 820 mm,

a width of 935 mm or more, but not more than 1 660 mm,

a height of 85 mm or more, but not more than 700 mm,

a weight of 250 kg or more, but not more than 700 kg,

a power of not more than 175 kWh,

a nominal voltage of 400 V

1,3 %

-

31.12.2020

0.6863

ex 8512 30 90

20

Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:

a printed circuit board,

a connector,

whether or not a metal holder,

for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2020

0.6689

ex 8529 90 65

28

Electronic assembly comprising a printed circuit board with at least:

processors for multi-media applications and video signal processing,

FPGA (Field Programmable Gate Array),

flash memory,

operating memory,

with or without USB, HDMI, VGA- and RJ-45 interfaces,

sockets and plugs for connecting an LCD-display, an LED lighting and a control panel

0 %

p/st

31.12.2020

0.7251

ex 8537 10 91

70

Programmable motor memory controller for a voltage not exceeding 1 000 V, comprising at least:

a printed circuit with active and passive components,

an aluminium housing, and

multiple connectors

0 %

p/st

31.12.2022

0.6866

ex 8538 90 91

ex 8538 90 99

20

50

Interior antenna for a car door locking system, comprising:

an antenna module in a plastic housing,

a connection cable with a plug,

at least two mounting brackets,

whether or not PCB including integrated circuits, diodes and transistors,

for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2020

0.5953

ex 8538 90 99

95

Copper base plate, containing more components than Insulated Gate Bipolar Transistor (IGBT) chips and diodes with a voltage of 650 V or more but not more than 1 200 V, for use as a heatsink in the manufacture of IGBT modules (1)

0 %

p/st

31.12.2023

0.6710

ex 8544 30 00

ex 8544 42 90

60

50

Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87 (1)

0 %

-

31.12.2020

0.6867

ex 8544 30 00

85

Extension two-core cable with two connectors, containing at least:

a rubber grommet,

a metal attachment bracket,

of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87

0 %

p/st

31.12.2020

0.5002

ex 8545 90 90

40

Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with:

controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance,

a thickness of less than 600 μm,

a weight of less than 500 g/m2

0 %

m2

31.12.2020

0.7581

ex 8708 50 20

ex 8708 50 99

ex 8708 99 10

ex 8708 99 97

60

15

45

65

Car transfer case with single input and dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 mm × 570 mm × 510 mm, comprising:

at least an actuator,

whether or not an interior distribution by chain

0 %

-

31.12.2024

0.6711

ex 8708 80 20

ex 8708 80 35

10

10

Upper strut insulator containing:

a metal holder with three mounting screws, and

a rubber bump,

for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2020

0.6705

ex 8708 80 20

ex 8708 80 91

20

10

Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2020

0.6704

ex 8708 80 20

ex 8708 80 91

30

20

Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, for use in the manufacture of goods of Chapter 87 (1)

0 %

p/st

31.12.2020

0.7365

ex 8708 80 99

30

Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:

with a chrome coating,

of a diameter of 11 mm or more, but not more than 28 mm,

of a length of 80 mm or more, but not more than 600 mm,

with a threaded end or a mandrel for resistance welding

0 %

-

31.12.2022

0.6687

ex 8708 95 10

ex 8708 95 99

10

20

Inflatable safety cushion of high-strength polyamide fibre:

sewn,

folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming

0 %

p/st

31.12.2020

0.6686

ex 8714 10 90

10

Motorcycle fork rod inner tubes:

of SAE1541 carbon steel,

with a hard chromium layer of 20 μm (+ 15 μm/– 5 μm),

with a wall thickness of 1,3 mm or more, but not more than 1,6 mm,

with an elongation at break of 15 %,

perforated

0 %

p/st

31.12.2020

0.5692

ex 9002 11 00

20

Lenses:

measuring not more than 95 mm × 55 mm × 50 mm,

with a resolution of 160 lines/mm or better, and

with a zoom ratio of 18 times

0 %

-

31.12.2022

0.6527

ex 9029 20 31

ex 9029 90 00

20

30

Clustered instrument panel with a microprocessor control board, with or without stepping motors, LED indicators or LCD display showing at least:

speed,

engine revolutions,

engine temperature,

the fuel level,

communicating via CAN-BUS and/or K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2024

0.5025

ex 9401 90 80

10

Ratchet disk for use in the manufacture of reclining car seats (1)

0 %

p/st

31.12.2020’

(4)

the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns:

Serial number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

‘0.7897

ex 2825 20 00

10

Lithium hydroxide monohydrate (CAS RN 1310-66-3)

2,6 %

-

31.12.2020

0.7895

ex 2903 72 00

10

Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7826

ex 2903 79 30

30

1-Bromo-5-chloropentane (CAS RN 54512-75-3) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7914

ex 2905 39 95

70

2-methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7828

ex 2909 30 38

50

2-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7846

ex 2909 50 00

40

2-methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7910

ex 2909 60 00

50

Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes

0 %

-

31.12.2024

0.7824

ex 2914 50 00

15

1,1-dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7834

ex 2915 40 00

10

Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7830

ex 2915 40 00

20

Sodium trichloroacetate (CAS RN 650-51-1) with a purity by weight of 96 % or more

0 %

-

31.12.2024

0.7899

ex 2915 90 70

18

Myristitic acid, lithium salt (CAS RN 20336-96-3) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7845

ex 2916 39 90

22

6-bromo-2-fluoro-3-(trifluoromethyl)benzoic acid (CAS RN 1026962-68-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7827

ex 2916 39 90

27

Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7880

ex 2917 19 80

45

Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more

0 %

-

31.12.2024

0.7907

ex 2918 19 98

50

12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters (2)

0 %

-

31.12.2024

0.7864

ex 2918 30 00

35

3-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN 23761-23-1)

0 %

-

31.12.2024

0.7898

ex 2920 29 00

80

2,4,8,10-tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a content of 95 % or more by weight (CAS RN 126050-54-2)

0 %

-

31.12.2024

0.7894

ex 2921 51 90

10

N-(4-Chlorophenyl)benzene-1,2-diamine (CAS RN 68817-71-0) with a purity by weight of 97 % or more

0 %

-

31.12.2024

0.7860

ex 2922 19 00

15

Aqueous solution, containing by weight:

73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5),

4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5)

0 %

-

31.12.2024

0.7853

ex 2922 49 85

13

O-Benzylglycine p-toluenesulphonate (CAS RN 1738-76-7) with a purity by weight of 93 % or more

0 %

-

31.12.2024

0.7879

ex 2923 90 00

50

Betaine hydrochloride (CAS RN 590-46-5) with a purity by weight of 93 % or more

0 %

-

31.12.2024

0.7841

ex 2924 29 70

47

(S)-tert-butyl(1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7832

ex 2925 29 00

50

(Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7859

ex 2930 90 98

29

4-amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7833

ex 2930 90 98

31

(p-toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7838

ex 2932 20 90

53

(R)-4-propyldihydrofuran-2(3H)-one (CAS RN 63095-51-2) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7855

ex 2932 99 00

37

4-(2-butyl-1-benzofuran-3-carbonyl)-2,6-diiodophenol (CAS RN 1951-26-4) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7903

ex 2933 19 90

13

3-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl fluoride (CAS RN 1255735-07-9) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7835

ex 2933 19 90

17

1,3-dimethyl-1H-pyrazole (CAS RN 694-48-4) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7918

ex 2933 19 90

23

Fluindapyr (ISO) (CAS RN 1383809-87-7) with a purity by weight of 96 % or more

0 %

-

31.12.2024

0.7836

ex 2933 19 90

27

3-(3,3,3-trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7844

ex 2933 39 99

74

4-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7906

ex 2933 39 99

81

4-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7866

ex 2933 39 99

82

Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a purity by dry weight of 92 % or more

0 %

-

31.12.2024

0.7825

ex 2933 59 95

68

Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7839

ex 2933 99 80

66

(6-(4-fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol (CAS RN 1799327-42-6) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7843

ex 2934 99 90

17

(S)-4-(tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7837

ex 2934 99 90

29

(2R,5S)-tert-butyl 4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1-carboxylate (CAS RN 1403902-77-1) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7840

ex 2934 99 90

33

(2R,3R,5R)-5-(4-amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotetrahydrofuran-3-yl benzoate (CAS RN 134790-39-9) with a purity by weight of 98 % or more

0 %

-

31.12.2024

0.7842

ex 2934 99 90

69

3-methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more

0 %

-

31.12.2024

0.7854

ex 2935 90 90

70

(4S)-4-hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more

0 %

-

31.12.2024

0.7885

ex 3204 15 00

20

Colourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with a colourant C.I. Vat Blue 1 content of 94 % or more by weight

0 %

-

31.12.2024

0.7922

ex 3823 19 10

20

12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) for the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters (2)

0 %

-

31.12.2024

0.7831

ex 3824 99 92

62

Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane

0 %

-

31.12.2024

0.7861

ex 3903 90 90

33

Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more

0 %

-

31.12.2024

0.7865

ex 3909 40 00

70

Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80 °C or more but not more than 95 °C according to standard ASTM E28-92 (CAS RN 112484-41-0)

0 %

-

31.12.2024

0.7882

ex 3920 69 00

30

Mono- or multilayer, transverse oriented, shrink film:

composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters,

with a thickness of 20 μm or more but not more than 100 μm,

with a length of 2 385 m or more but not more than 9 075 m,

biodegradable and compostable (as determined by the method EN 13432)

0 %

-

31.12.2024

0.7883

ex 3920 69 00

70

Mono- or multilayer, biaxially oriented film:

composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters,

with a thickness of 9 μm or more but not more than 120 μm,

with a length of 1 395 m or more but not more than 21 560 m,

biodegradable and compostable (as determined by the method EN 13432)

0 %

-

31.12.2024

0.7891

ex 7326 90 94

40

Steel ball neck, drop forged, machined, also heat treated or surface treated, with an angle between the centre of the conical head and the arm of less than 90° or with an angle between the centre of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars (2)

0 %

-

31.12.2024

0.7911

ex 7506 20 00

10

Sheets and strips in coils of nickel alloy C276 (EN 2.4819) with

a thickness of 0,5 mm or more but not more than 3 mm,

a width of 770 mm or more but not more than 1 250 mm

0 %

-

31.12.2024

0.7851

ex 8409 99 00

25

Hoses assembly for fuel return from injectors to engine fuel unit, consisting of at least:

three rubber hoses, whether or not with a protective braided sleeving,

three connectors for connecting fuel injectors,

five metal clamps,

one T-shaped plastic joint,

for use in the manufacture of engines of motor vehicles (2)

0 %

-

31.12.2024

0.7850

ex 8481 30 99

30

Brake booster check valve assembly, containing at least:

three vulcanized rubber hoses,

one membrane valve,

two metal clamps,

one metal holder,

whether or not a connecting metal pipe,

for use in the manufacture of motor vehicles (2)

0 %

-

31.12.2024

0.7920

ex 8483 40 59

30

Hydrostatic speed changer:

with a hydro pump and a differential with wheel axle,

whether or not with a fan impeller and/or a pulley,

for use in the manufacture of lawn mowers of Subheadings 8433 11 and 8433 19 or other mowers of Subheading 8433 20  (2)

0 %

p/st

31.12.2024

0.7857

ex 8501 10 10

40

Synchronous hybrid stepper motor with:

an output not exceeding 18 W,

two phases,

a rated current of not more than 2,5 A/phase,

a rated voltage of not more than 20 V,

with or without a threaded shaft,

for use in the manufacture of 3D printers (2)

0 %

-

31.12.2024

0.7888

ex 8507 60 00

68

Lithium-ion accumulator in a metal housing with:

a length of 173 mm or more but not more than 175 mm,

a width of 41,5 mm or more but not more than 43 mm,

a height of 85 mm or more but not more than 103 mm,

a nominal voltage of 3,6 V or more but not more than 3,75 V, and

a nominal capacity of 93 Ah or more but not more than 94 Ah

1,3 %

-

31.12.2024

0.7873

ex 8537 10 91

20

Electronic assembly containing:

a microprocessor,

a programmable memory controller and other electronic components mounted on a printed circuit,

with or without light-emitting diode (LED) or liquid crystal display (LCD) indicators,

for use in the manufacture of products of Subheadings 8418 21 , 8418 29 , 8421 12 , 8422 11 , 8450 11 , 8450 12 , 8450 19 , 8451 21 , 8451 29 and 8516 60  (2)

0 %

-

31.12.2024

0.7848

ex 8544 30 00

45

Linking seven-core cable for connecting sensor for pressure measure in intake manifold (Boost Pressure Sensor – BPS) and sockets for glow plugs with common connector, containing four sockets and two connectors for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars (2)

0 %

-

31.12.2024

0.7847

ex 8544 30 00

55

Connecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines for passenger cars (2)

0 %

-

31.12.2024

0.7856

ex 8708 40 20

ex 8708 40 50

70

60

Manual gearbox in cast aluminium housing for transverse installation with:

a width of not more than 480 mm,

a height of not more than 400 mm,

a length of not more than 550 mm,

five gears,

a differential gear,

an engine torque of 250 Nm or less,

for use in the manufacture of motor vehicles of Heading 8703 (2)

0 %

-

31.12.2024

0.7849

ex 8708 93 10

ex 8708 93 90

40

40

Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for:

cruise control reset,

electronic parking brake release,

start and stop engine management under Idle Stop and Go system (ISG),

for use in the manufacture of passenger vehicles (2)

0 %

-

31.12.2024

0.7921

ex 8708 99 97

18

Hydrostatic speed changer:

with a hydro pump and a differential with wheel axle,

whether or not with a fan impeller and/or a pulley,

for use in the manufacture of tractors of Subheadings 8701 91 90 and 8701 92 90 , whose main function is that of a lawn mower (2)

0 %

p/st

31.12.2023’


(1)  Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).;

(2)  Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).


Top