Accept Refuse

EUR-Lex Access to European Union law

This document is an excerpt from the EUR-Lex website

Document 32012R0205

Commission Delegated Regulation (EU) No 205/2012 of 6 January 2012 amending Annex II to Regulation (EU) No 510/2011 of the European Parliament and of the Council with regard to the data source and the data parameters to be reported by Member States Text with EEA relevance

OJ L 72, 10.3.2012, p. 2–6 (BG, ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)
Special edition in Croatian: Chapter 15 Volume 030 P. 78 - 82

In force

ELI: http://data.europa.eu/eli/reg_del/2012/205/oj

10.3.2012   

EN

Official Journal of the European Union

L 72/2


COMMISSION DELEGATED REGULATION (EU) No 205/2012

of 6 January 2012

amending Annex II to Regulation (EU) No 510/2011 of the European Parliament and of the Council with regard to the data source and the data parameters to be reported by Member States

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 510/2011 of the European Parliament and of the Council of 11 May 2011 setting emission performance standards for new light commercial vehicles as part of the Union’s integrated approach to reduce CO2 emissions from light-duty vehicles (1), and in particular the second subparagraph of Article 8(9) thereof,

Whereas:

(1)

Pursuant to Articles 18 and 26 of Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (2), a manufacturer must ensure that each new light commercial vehicle placed on the market in the Union is accompanied by a valid certificate of conformity and a Member State may not register such a vehicle unless it is accompanied by such a certificate. In accordance with Annex II to Regulation (EU) No 510/2011, data collected by a Member State to monitor the manufacturer’s compliance with Articles 4 and 11 of that Regulation are to be consistent with a certificate of conformity and based on this document only.

(2)

Regulation (EC) No 443/2009 of the European Parliament and of the Council of 23 April 2009 setting emission performance standards for new passenger cars as part of the Community’s integrated approach to reduce CO2 emissions from light-duty vehicles (3) requires the Member States to use the certificate of conformity as a data source but allows for the use of other documents providing equivalent accuracy for the monitoring and reporting of CO2 emissions from passenger cars. In order to ensure cost-efficient and accurate monitoring and reporting of CO2 emissions data for light commercial vehicles, it is appropriate in the short-term to allow Member States to use the same procedure and data sources for the monitoring and reporting under Regulation (EU) No 510/2011 as those used for reporting under Regulation (EC) No 443/2009. Therefore, Annex II to Regulation (EU) No 510/2011 should, where duly justified, allow for the use of other data sources providing equivalent accuracy for CO2 monitoring and reporting purposes. The Member States should put the necessary measures in place to ensure adequate accuracy in the monitoring procedure.

(3)

Based on the experience gained from the monitoring of CO2 emissions from passenger cars, it is appropriate, in order to improve the means for verifying the accuracy of the data, to add type-approval number as a detailed data parameter to be reported by Member States. It has also become evident that there is no need for the parameter ‘commercial name’ which therefore should be deleted from the detailed monitoring data.

(4)

In order to ensure clarity and precision in the monitoring and reporting by Member States, it is also necessary to ensure consistency between the different requirements specified in Annex II to Regulation (EU) No 510/2011. The detailed data requirements are specified in the reporting formats set out in Part C of Annex II. Parts A and B of that Annex should therefore be adjusted to reflect those detailed data requirements accurately.

(5)

Annex II to Regulation (EU) No 510/2011 should therefore be amended accordingly,

HAS ADOPTED THIS REGULATION:

Article 1

Annex II to Regulation (EU) No 510/2011 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the third day following its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 6 January 2012.

For the Commission

The President

José Manuel BARROSO


(1)  OJ L 145, 31.5.2011, p. 1.

(2)  OJ L 263, 9.10.2007, p. 1.

(3)  OJ L 140, 5.6.2009, p. 1.


ANNEX

Annex II to Regulation (EU) No 510/2011 is amended as follows:

(1)

Part A is amended as follows:

(a)

in point 2, the first sentence is replaced by the following:

‘The details referred to in point 1 shall be taken from the certificate of conformity or be consistent with the certificate of conformity issued by the manufacturer of the relevant light commercial vehicle. Where the certificate of conformity is not used, Member States shall put the necessary measures in place to ensure adequate accuracy in the monitoring procedure.’;

(b)

point 3 is amended as follows:

(i)

point (b) is replaced by the following:

‘(b)

The number of new light commercial vehicles having values for each of the following parameters:

(i)

CO2 emissions;

(ii)

mass;

(iii)

wheelbase;

(iv)

track width steering axle;

(v)

track width other axle.’;

(ii)

point (c) is deleted;

(iii)

in point (d), points (iv) and (v) are replaced by the following:

‘(iv)

technically permissible maximum laden mass;

(v)

wheelbase;

(vi)

track width steering axle;

(vii)

track width other axle.’;

(2)

in Part B, points 2, 3, 5 and 6 are deleted;

(3)

in Part C, Section 2 on detailed monitoring data is replaced by the following:

Section 2 —   Detailed monitoring data

Manufacturer name — EU standard denomination

Manufacturer name — Manufacturer denomination

Manufacturer name — National Registry denomination

Type-approval number and its extension(s)

Type

Variant

Version

Make

Category of vehicle type-approved

Category of vehicle registered

Total number of new registrations

Specific emissions of CO2 (g/km)

Mass (kg)

Technically permissible maximum laden mass (kg)

Wheelbase (mm)

Track width steering axle (mm)

Track width other axle (mm)

Fuel type

Fuel mode

Capacity (cm3)

Electric energy consumption (Wh/km)

Innovative technology or group of innovative technologies code

Emissions reduction through innovative technologies

Manuf. 1

Manuf. 1

Manuf. 1

Number 1

Type 1

Variant 1

Version 1

Manuf. 1

Manuf. 1

Manuf. 1

Number 1

Type 1

Variant 1

Version 2

Manuf. 1

Manuf. 1

Manuf. 1

Number 1

Type 1

Variant 2

Version 1

Manuf. 1

Manuf. 1

Manuf. 1

Number 1

Type 1

Variant 2

Version 2

Manuf. 1

Manuf. 1

Manuf. 1

Number 2

Type 2

Variant 1

Version 1

Manuf. 1

Manuf. 1

Manuf. 1

Number 2

Type 2

Variant 1

Version 2

Manuf. 1

Manuf. 1

Manuf. 1

Number 2

Type 2

Variant 2

Version 1

Manuf. 1

Manuf. 1

Manuf. 1

Number 2

Type 2

Variant 2

Version 2

Manuf. 2

Manuf. 2

Manuf. 2

Number 1

Type 1

Variant 1

Version 1

Manuf. 2

Manuf. 2

Manuf. 2

Number 1

Type 1

Variant 1

Version 2

Manuf. 2

Manuf. 2

Manuf. 2

Number 1

Type 1

Variant 2

Version 1

Manuf. 2

Manuf. 2

Manuf. 2

Number 1

Type 1

Variant 2

Version 2

…’


Top