EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 52021PC0217

Proposal for a COUNCIL REGULATION amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

COM/2021/217 final

Brussels, 29.4.2021

COM(2021) 217 final

2021/0112(NLE)

Proposal for a

COUNCIL REGULATION

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products


EXPLANATORY MEMORANDUM

1.CONTEXT OF THE PROPOSAL

Reasons for and objectives of the proposal

In order to ensure sufficient and uninterrupted supplies of certain agricultural and industrial products which are insufficiently produced or not produced at all in the Union and to avoid any disturbances on the market for these products, some autonomous Common Customs Tariff duties have been partially or totally suspended by Council Regulation (EU) No 1387/2013 (hereinafter "the Regulation").

The Regulation is updated every six months to accommodate the needs of Union industry. The Commission, assisted by the Economic Tariff Questions Group, has reviewed all requests from the Member States for autonomous tariff suspensions.

Following this review, the Commission considers that the suspension of duties is justified for some new products, currently not listed in the Annex of the Regulation. In relation to some other products, it is necessary to modify the conditions in terms of product description, classification or date foreseen for mandatory review. Products for which a tariff suspension is no longer in the Union's economic interest are proposed to be withdrawn.

Consistency with existing policy provisions in the policy area

This proposal does not affect countries that have a preferential trading agreement with the Union nor - candidate countries or potential candidates for preferential agreements with the Union (e.g. Generalised System of Preferences; the African, Caribbean and Pacific group trade regime; Free Trade Agreements).

Consistency with other Union policies

The proposal is in line with Union policies in the area of agriculture, trade, enterprise, environment, development and external relations.

2.LEGAL BASIS, SUBSIDIARITY AND PROPORTIONALITY

Legal basis

The legal basis of this proposal is Article 31 of the Treaty on the Functioning of the European Union (TFEU).

Subsidiarity (for non-exclusive competence)

The proposal falls under the exclusive competence of the Union. The subsidiarity principle therefore does not apply.

Proportionality

The proposal complies with the principle of proportionality. The measures envisaged are in line with the principles for simplifying procedures for operators engaged in foreign trade, as stated in the Commission communication concerning autonomous tariff suspensions and quotas 1 . This Regulation does not go beyond what is necessary to achieve the objectives pursued in accordance with Article 5(4) of the Treaty on European Union (TEU).

Choice of the instrument

By virtue of Article 31 of the TFEU, "Common Customs Tariff duties shall be fixed by the Council on a proposal from the Commission". Therefore, a Council regulation is the appropriate instrument.

3.RESULTS OF EX-POST EVALUATIONS, STAKEHOLDER CONSULTATIONS AND IMPACT ASSESSMENTS

Ex-post evaluations/fitness checks of existing legislation

The autonomous suspensions scheme was subject to an evaluation study carried out in 2013. The evaluation concluded that the core rationale for the scheme remains valid. The cost savings for EU businesses importing goods under the scheme can be significant. In turn, depending on the product, company and sector, these savings can have wider benefits, such as boosting competitiveness, making production methods more efficient, and creating or keeping jobs in the Union. Details of the savings of this regulation can be found in the attached legislative financial statement.

Stakeholder consultations

The Economic Tariff Questions Group, which consists of delegations from all Member States plus Turkey, assisted the Commission to assess this proposal. The group met three times before agreeing the changes in this proposal.

It carefully assessed each request (new, an amendment or deletion). It particularly examined each case to ensure that it was not causing any harm to Union producers and was strengthening and consolidating the competitiveness of Union's production. The members of the Economic Tariff Questions Group carried out the assessment through discussions, and Member States consulted the concerned industries, associations, chambers of commerce and other stakeholders involved.

All listed tariff suspensions were the subject of agreements or compromises reached in the discussions held at the Economic Tariff Questions Group. No potentially serious risks with irreversible consequences were mentioned.

Impact assessment

The proposed amendment is of a purely technical nature and concerns only the coverage of suspensions listed in the Annex to Council Regulation (EU) No 1387/2013. Therefore, no impact assessment was carried out for this proposal.

Fundamental rights

The proposal has no consequences on fundamental rights.

4.BUDGETARY IMPLICATIONS

This proposal has no financial impact on expenditure, but has a financial impact on revenue. Uncollected customs duties corresponding to the suspension amount approximately EUR 36 million per year. The negative effect on the budget’s traditional own resources is EUR 28,8 million per year (i.e. 80 % of the total). The legislative financial statement sets out the budgetary implications of the proposal in greater detail.

The loss of revenue in traditional own resources shall be compensated by Member States Gross National Income (GNI) based own resource contributions.

5.OTHER ELEMENTS

Implementation plans and monitoring, evaluation and reporting arrangements

The measures proposed are managed within the framework of the Integrated Tariff of the European Union (TARIC) and applied by customs administrations of the Member States.

2021/0112 (NLE)

Proposal for a

COUNCIL REGULATION

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances in the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council 2 (‘CCT duties’) on those products have been suspended by Council Regulation (EU) No 1387/2013 3 . Those products can be imported into the Union at reduced or zero duty rates.

(2)The Union production of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to grant a complete suspension of the CCT duties on those products.

(3)With a view to promoting integrated battery production in the Union in accordance with the Communication from the Commission of 17 May 2018 entitled ‘Europe on the Move – Sustainable Mobility for Europe: safe, connected, and clean’, a partial suspension of the CCT duties should be granted in respect of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013. The date for the mandatory review of those suspensions should be 31 December 2021, in order for that review to take into account the evolution of the battery sector in the Union.

(4)It is necessary to amend the product description and classification for certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends in the market.

(5)It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be withdrawn. Furthermore, certain products should be deleted from that Annex as a result of the implementation of the agreement in the form of the Declaration on the Expansion of Trade in Information Technology Products 4 , which reduced the duty rate for the products concerned to zero.

(6)Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(7)In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the Communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 July 2021. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1387/2013 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 July 2021.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels,

   For the Council

   The President

LEGISLATIVE FINANCIAL STATEMENT

1.1. NAME OF THE PROPOSAL:

Council Regulation amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

2.BUDGET LINES:

Chapter and Article: Chapter 12, Article 120

Amount budgeted for the year 2021: 17 605 700 000

3.FINANCIAL IMPACT

   Proposal has no financial implications

X Proposal has no financial impact on expenditure but has a financial impact on revenue -the effect is as follows:

(EUR million to one decimal place)

Budget line

Revenue

6 month period, starting dd/mm/yyyy

[Year: second half of 2021]

Article 120

Impact on own resources

01/07/2021

-14,4

Situation following action

[2021 – 2025]

Article 120

- 28,8 EUR million/ year

The Annex contains 89 new products. The uncollected duties corresponding to these suspensions, calculated on the basis of requesting Member State projections for the period 2021 to 2025, amount to EUR 20,3 million per year.

On the basis of the existing statistics for preceding years, it would appear, however, necessary to increase this amount by an average factor, estimated at 1,8 to take account of imports into other Member States using the same suspensions. This means uncollected duties of some EUR 36,5 million per year.

11 products have been withdrawn from this Annex reflecting the reintroduction of customs duties. This represents an increase of EUR 0,5 million per year in the collection of duties, as estimated on the basis of 2020 statistics.

On the basis of the above, the impact on the loss of revenue for the EU budget resulting from this Regulation is estimated at 36,5 – 0,5 = EUR 36 million (gross amount, including collection costs) x 0,8 = EUR 28,8 million per year for the period 01.07.2021 - 31.12.2025.

4.ANTI-FRAUD MEASURES

Checks on the end-use of some of the products covered by this Council Regulation will be carried out in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code.

In addition, Member States may carry out any customs controls they deem appropriate under the risk management they undertake, as provided for by Article 46 of Regulation (EU) n° 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code.

(1)    OJ C 363, 13.12.2011, p. 6.
(2)    Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).
(3)    Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201).
(4)     OJ L 161, 18.6.2016, p. 4 .
Top

Brussels, 29.4.2021

COM(2021) 217 final

ANNEX

to the

Proposal for a COUNCIL REGULATION

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products


ANNEX

The Annex to Regulation (EU) No 1387/2013 is amended as follows:

(1)the entries with the following serial numbers are deleted: 0.2938, 0.3108, 0.3139, 0.3141, 0.4179, 0.4197, 0.4734, 0.4735, 0.4883, 0.5312 and 0.5470;

(2)the following entries replace those entries that have the same serial numbers:

Serial Number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

‘0.3341

ex 1515 90 99

92

Vegetable oil, refined or semi-refined, containing by weight 35 % or more but not more than 57 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid

0 %

-

31.12.2023

0.7674

ex 2905 32 00

20

(2S)-propane-1,2-diol (CAS RN 4254-15-3) with a purity by weight of 98 % or more

0 %

-

31.12.2023

0.6003

ex 2915 90 70

27

Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 99 % or more

0 %

-

31.12.2023

0.3468

ex 2916 13 00

40

Zinc Dimethacrylate (CAS RN 13189-00-9) in the form of powder with a purity by weight of 99 % or more, with not more than 1 % of a stabiliser

0 %

-

31.12.2023

0.2941

ex 2920 19 00

40

Tolclofos-methyl (ISO) (CAS RN 57018-04-9) with a purity by weight of 96 % or more

0 %

-

31.12.2023

0.4298

ex 2930 20 00

40

Prosulfocarb (ISO) (CAS RN 52888-80-9) with purity by weight of 97 % or more

0 %

-

31.12.2022

0.5920

ex 2933 29 90

28

Prochloraz (ISO) (CAS RN 67747-09-5) with purity by weight of 97 % or more

0 %

-

31.12.2023

0.6987

ex 2933 59 95

52

6-Benzyladenine (CAS RN 1214-39-7) with a purity by weight of 97 % or more

0 %

-

31.12.2021

0.7815

ex 2934 99 90

82

Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5-c]pyrrol-1-one (CAS RN 129385-59-7) with a purity by weight of 97 % or more

0 %

-

31.12.2024

0.7975

ex 3801 10 00

30

Artificial graphite in powder form, (CAS RN 7782-42-5) with:

with or without coating on the surface,

particle size represented by d50 value of 15 μm (± 4),

specific surface area (measured by BET) less than 3,5 m2/g,

tap density: 1,3 g/m3 (± 0,5),

specific Discharge Capacity of 348 mAh/g (± 13),

initial efficiency above 93,0 %

1.8 %

-

31.12.2021

0.4459

ex 3919 90 80

83

Reflector or diffuser sheets, in rolls,

for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or

for equal transmission and distribution of light, intended for LCD modules

0 %

-

31.12.2022

0.5139

ex 3920 10 89

55

Ethylene vinyl acetate (EVA) film:

 with a raised relief surface with embossed undulations,

 not laminated,

 not cross-linked, and

 with a thickness of more than 0,3 mm

0 %

-

31.12.2021

0.5167

ex 3920 20 29

94

Mono-axial oriented, co-extruded film:

consisting of 3 to 5 layers,

each layer mainly consisting of polypropylene and/or polyethylene,

each layer containing not more than 10 % by weight of other polymers,

whether or not containing titanium dioxide in the core layer,

of an overall thickness of not more than 75 μm

0 %

-

31.12.2022

0.2546

ex 6903 90 90

40

Silicon carbide reactor tubes and holders having a maximum service temperature of 1370 °C or more

0 %

-

31.12.2023

0.8028

ex 6909 19 00

40

Ceramic-carbon absorption or adsorption cartridges of fuel motor vehicle systems, with the following characteristics:

extruded fired ceramic bound multicellular cylindrical structure,

5 % or more by weight but not more than 70 % by weight of activated carbon,

30 % or more by weight but no more than 90 % by weight of ceramic binder,

with a diameter of 29 mm or more but no more than 41 mm,

a length of not more than 150 mm,

fired at temperature of 800 °C or more

0 %

p/st

31.12.2025

0.6680

ex 7326 90 98

ex 7907 00 00

40

10

Iron, steel and/or zinc alloy weights:

with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm,

whether or not with parts of other material,

whether or not with parts of other metals,

whether or not surface treated,

whether or not printed,

of a kind used for the production of remote controls

0 %

-

31.12.2025

0.4050

ex 7607 11 90

ex 7607 11 90

65

67

Plain aluminium foil with the following parameters:

an aluminium content of 99,98 % or more,

a thickness of 0,070 mm or more but not more than 0,125 mm,

with a cubic texture,

of a kind used for high voltage etching

3.7 %

-

31.12.2021

0.7966

ex 8104 19 00

10

Unwrought magnesium containing 90 % or more but not more than 99,7 % by weight of magnesium

0 %

-

31.12.2025

0.5097

ex 8104 30 00

35

Magnesium powder:

of purity by weight of more than 99,5 %, and

with a particle size of not more than 0,8 mm

0 %

-

31.12.2025

0.4133

ex 8418 99 10

ex 8418 99 10

71

79

Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles

 (1)

0 %

p/st

31.12.2021

0.6858

ex 8501 10 99

64

DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:

with Ingress Protection (IP) standard of IP69,

with a rotor speed of not more than 6 500 rpm when not loaded,

with a rated voltage of 12,0 V (± 0,1),

of a specified temperature range of  – 40 °C or more but not more than + 165 °C,

with or without a connecting pinion,

with or without an engine connector,

with or without a flange,

with a diameter of not more than 40 mm (not including the flange),

with an overall height of not more than 90 mm (from the base to the pinion)

0 %

-

31.12.2021

0.6809

ex 8501 31 00

ex 8501 32 00

43

55

Automotive-ready, brushless and permanently excited direct current motor with:

a specified speed of not more than 4 100 rpm,

a minimum output of 400 W, but not more than 1,3 kW (at 12V),

a flange diameter of 85 mm or more but not more than 200 mm,

a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,

a housing length of not more than 265 mm, measured from the flange to the outer ending,

a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),

a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and

surface magnets,

whether or not with electronic power steering controller,

whether or not with pulley,

whether or not with rotor position sensor

0 %

-

31.12.2025

0.7641

ex 8507 60 00

58

Prismatic lithium-ion electric accumulator with:

a width of 120,0 mm or more but not more than 305,0 mm,

a thickness of 12,0 mm or more but not more than 67,0 mm,

a height of 72,0 mm or more but not more than 126,0 mm,

a nominal voltage of 3,6 V or more but not more than 3,75 V, and

a nominal capacity of 6,9 Ah or more not more than 265 Ah,

for use in the manufacture of rechargeable electric vehicle batteries

 (1)

1.3 %

-

31.12.2021

0.5356

ex 8507 60 00

75

Rectangular lithium-ion-accumulator with:

a metal casing,

a length of 147,85 mm or more but not more than 173,15 mm,

a width of 17,4 mm or more but not more than 21,1 mm,

a height of 90,85 mm or more but not more than 95,15 mm,

a nominal voltage of 3,3 V or more but not more than 3,65 V, and

a nominal capacity of 17,5 Ah or more

1.3 %

-

31.12.2021

0.7856

ex 8708 40 20

ex 8708 40 50

70

60

Manual gearbox in cast aluminium housing for transverse installation with:

a width of not more than 480 mm,

a height of not more than 400 mm,

a length of not more than 550 mm,

five or six gears,

a differential gear,

an engine torque of 400 Nm or less,

for use in the manufacture of motor vehicles of Heading 8703

 (1)

0 %

-

31.12.2024

0.6583

ex 8708 99 10

ex 8708 99 97

60

50

Aluminium engine bracket, with dimensions of:

height of more than 10 mm but not more than 200 mm,

width of more than 10 mm but not more than 250 mm,

length of more than 10 mm but not more than 200 mm,

equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:

internal porosity not more than 1 mm,

outer porosity not more than 2 mm,

rockwell hardness HRB 10 or more,

of a kind used in the production of suspensions systems for engines in motor vehicles

0 %

p/st

31.12.2024

0.7101

ex 9001 10 90

40

Fibre optic plates:

uncoated and unpainted,

of a length of 30 mm or more, but not more than 234,5 mm,

of a width of 7 mm or more, but not more than 28 mm, and

of a height of 0,5 mm or more, but not more than 3 mm,

of a kind used in dental x-ray systems

0 %

-

31.12.2021

0.7590

ex 9002 11 00

18

Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:

a horizontal field of view range to a maximum of 120 deg,

a diagonal field of view range to a maximum of 105 deg,

a focal length to a maximum of 7,50 mm,

a relative aperture of a maximum of F/2,90,

a maximum diameter of 22 mm

0 %

-

31.12.2023

(1)

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)’

(3)the following entries are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns:

Serial Number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

‘0.8144

ex 2710 12 25

20

Mixture of C6 aliphatic hydrocarbons (CAS RN 92112-69-1), containing by weight 60 % or more but not more than 80 % of n-hexane (CAS RN 110-54-3), with:

a specific gravity of 0,666 or more but not more than 0,686,

a total of carbonyl compounds of less than 1 ppm,

a total of acetylenic compounds of less than 2 ppm

0 %

-

31.12.2025

0.8076

ex 2903 99 80

45

1-Bromo-4-(trans-4-propylcyclohexyl)benzene (CAS RN 86579-53-5) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8101

ex 2903 99 80

55

1-Bromo-4-(trans-4-ethylcyclohexyl)benzene (CAS RN 91538-82-8) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8042

ex 2910 90 00

40

[(2R)-Oxiran-2-yl]methyl 3-nitrobenzenesulphonate (CAS RN 115314-17-5) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.8073

ex 2912 19 00

20

Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8147

2912 42 00

Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) 

0 %

-

31.12.2025

0.8058

ex 2914 29 00

45

4-Propylcyclohexan-1-one (CAS RN 40649-36-3) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8146

ex 2915 90 70

23

Tin bis(2-ethylhexanoate) (CAS RN 301-10-0) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.8057

ex 2916 20 00

45

Cyclopentanecarboxylic acid (CAS RN 3400-45-1) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8039

ex 2916 39 90

78

(2,5-dibromophenyl)acetic acid (CAS RN 203314-28-7) with a purity by weight of  98,0 % or more

0 %

-

31.12.2025

0.8044

ex 2918 19 98

60

(R)-tert-butyl 2'-(1-hydroxyethyl)-3-methyl-[1,1'-biphenyl]-4-carboxylate (CAS RN 1246560-92-8) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8075

ex 2918 30 00

45

Methyl 5-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene-2-carboxylate (CAS RN 150192-89-5) with a purity by weight of 96 % or more

0 %

-

31.12.2025

0.8066

ex 2918 99 90

48

2-Bromo-5-methoxybenzoic acid (CAS RN 22921-68-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8045

ex 2921 29 00

15

(2S)-propane-1,2-diamine dihydrochloride (CAS RN 19777-66-3) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8067

ex 2921 29 00

25

N,N'-Diallylpropane-1,3-diamine dihydrochloride (CAS RN 205041-15-2) with a purity by weight or 96 % or more

0 %

-

31.12.2025

0.8059

ex 2921 49 00

65

Bis-(9,9-dimethylfluoren-2-yl)amine (CAS RN 500717-23-7) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8027

ex 2924 19 00

28

(2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (2:1) (CAS RN 54940-97-5) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8030

ex 2924 19 00

33

(2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (1:1) (CAS RN 70796-17-7) with a purity by weight of 98,5 % or more

0 %

-

31.12.2025

0.8041

ex 2924 19 00

38

Diethyl acetamidomalonate (CAS RN 1068-90-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8049

ex 2924 19 00

43

N6-(tert-butoxycarbonyl)-L-lysine methyl ester hydrochloride (CAS RN 2389-48-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8043

ex 2924 29 70

58

2-chloro-N-[1-(4-chloro-3-fluorophenyl)-2-methylpropan-2-yl]acetamide (CAS RN 787585-35-7) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8060

ex 2924 29 70

78

5-amino-3-(4-chlorophenyl)-5-oxopentanoic acid (CAS RN 1141-23-7) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8033

ex 2925 29 00

60

Formamidine acetate (CAS RN 3473-63-0) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.8040

ex 2925 29 00

70

Bromomethylidene(dimethyl)azanium bromide (CAS RN 24774-61-6) with a purity by weight of  97 % or more

0 %

-

31.12.2025

0.8061

ex 2928 00 90

38

Aqueous solution of methoxyammonium chloride (CAS-RN 593-56-6), containing by weight: 

30 % or more but not more than 40 % of methoxyammonium chloride

not more than 4 % of hydrochloric acid

0 %

-

31.12.2025

0.8093

ex 2928 00 90

43

2-(3-methoxy-3-oxopropyl)-1,1,1-trimethylhydrazinium bromide (CAS RN 106966-25-0) with a purity by weight of  99 % or more

0 %

-

31.12.2025

0.8036

ex 2930 90 98

11

Benzyl (2S)-2-amino-3-[3-(methanesulphonylphenyl)]propanoate hydrochloride (CAS RN 1194550-59-8) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8047

ex 2930 90 98

14

(E)-N'-(2-Cyano-4-(3-(1-hydroxy-2-methylpropan-2-yl)thioureido)phenyl)-N,N-dimethyl-formimidamide (CAS RN 1429755-57-6) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8050

ex 2930 90 98

19

4-Amino-5-(ethanesulphonyl)-2-methoxybenzoic acid (CAS RN 71675-87-1) with a purity by weight of  98 % or more

0 %

-

31.12.2025

0.8069

ex 2930 90 98

28

Mesotrione (ISO) (CAS RN 104206-82-8) in form of wet cake or wet paste, with

a purity of 74 % or more but not more than 87 % by weight, and

a maximum water content of 23 % by weight

0 %

-

31.12.2025

0.8051

ex 2931 90 00

23

Ixazomib citrate (INNM) (CAS RN 1239908-20-3) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8063

ex 2931 90 00

28

Triethoxy(3-isocyanatopropyl)silane (CAS RN 24801-88-5) with a purity by weight of 96 % or more

0 %

-

31.12.2025

0.8035

ex 2932 99 00

38

1-Benzofuran-6-carboxylic acid (CAS RN 77095-51-3) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8046

ex 2933 19 90

48

1-(3-iodo-1-isopropyl-1H-pyrazol-4-yl)ethanone (CAS RN 1269440-49-4) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8068

ex 2933 39 99

30

4-amino-3-(4-phenoxyphenyl)-1-[(3R)-piperidin-3-yl]-1,3-dihydro-2H-imidazo[4,5-c]pyridin-2-one (CAS RN 1971921-35-3) mono oxalate with a purity by weight of the free base of 70 % or more

0 %

-

31.12.2025

0.8072

ex 2933 39 99

75

Clodinafop-propargyl (ISO) (CAS RN 105512-06-9) with a purity by weight of 90 % or more

0 %

-

31.12.2025

0.8074

ex 2933 39 99

80

Tert-Butyl (3R)-3-(4-amino-2-oxo-2,3-dihydro-1H-imidazo[4, 5-c]pyridin-1-yl)piperidine-1-carboxylate (CAS RN 1971921-33-1) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8096

ex 2933 39 99

89

1-Benzyl-4-phenylpiperidine-4-carbonitrile monohydrochloride (CAS RN 71258-18-9) with a purity by weight of  98 % or more

0 %

-

31.12.2025

0.8037

ex 2933 49 90

55

2-(tert-butoxycarbonyl)-5,7-dichloro-1,2,3,4-tetrahydroisoquinoline-6-carboxylic acid (CAS RN 851784-82-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8056

ex 2933 59 95

42

2-Chloropyrimidine (CAS RN 1722-12-9) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8038

ex 2933 79 00

45

1-phenyl-3H-indol-2-one (CAS RN 3335-98-6) with a purity by weight of  99 % or more

0 %

-

31.12.2025

0.8089

ex 2933 99 80

25

6-(4-Benzylamino-3-nitrophenyl)-5-methyl-4,5-dihydro-2H-pyridazin-3-one (CAS RN 77469-62-6) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8032

ex 2933 99 80

65

1,2,4-Triazole (CAS RN 288-88-0) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.8053

ex 2933 99 80

69

5-Formyl-2,4-dimethyl-1H-pyrrole-3-carboxylic acid (CAS RN 253870-02-9) with a purity by weight of 96 % or more

 

0 %

-

31.12.2025

0.8054

ex 2933 99 80

76

2-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8064

ex 2933 99 80

77

9-[1,1′-Biphenyl]-3-yl-9′-[1,1′-biphenyl]-4-yl-3,3′-bi-9H-carbazole (CAS RN 1643479-47-3) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8094

ex 2934 99 90

40

2,3-Pyrazinedicarboxylic anhydride (CAS RN 4744-50-7) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8031

ex 2934 99 90

55

Uridine (CAS RN 58-96-8) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8048

ex 2934 99 90

81

1-(4-aminophenyl)-5-(morpholin-4-yl)-2,3-dihydropyridin-6-one (CAS RN 1267610-26-3) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8055

ex 2935 90 90

80

4-Chloro-3-sulphamoylbenzoic acid (CAS RN 1205-30-7) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.8137

ex 3208 90 19

ex 3911 90 99

13

63

Mixture, containing by weight:

30 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0),

10 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3),

40 % or more, but not more than 55 % of ethanol (CAS RN 64-17-5),

1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3)

0 %

-

31.12.2025

0.8083

ex 3824 99 92

92

Solution consisting of:

 50 (± 2) % by weight sodium mentholate (CAS RN 19321-38-1), and

 50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (CAS RN 64742-89-8)

0 %

-

31.12.2025

0.8121

ex 3824 99 92

93

Solution of not more than 15 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3) in a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and ethyl methyl carbonate (CAS RN 623-53-0), contains organic carbonate derivatives as additives

3.2 %

-

31.12.2021

0.8062

ex 3824 99 93

51

Tris(hydroxymethyl)phosphine oxide (CAS RN 1067-12-5) with a purity by weight of 85 % or more

0 %

-

31.12.2025

0.8122

ex 3824 99 96

68

Lithium nickel dioxide (CAS RN 12325-84-7) containing by weight:

less than 5 % of lithium hydroxide (CAS RN 1310-65-2),

less than 5 % of lithium carbonate (CAS RN 554-13-2), and

less than 15 % of nickel oxide (CAS RN 11099-02-8)

3.2 %

-

31.12.2021

0.8125

ex 3902 30 00

20

Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene

0 %

-

31.12.2025

0.8126

ex 3905 91 00

50

Aqueous solution consisting by weight of:

10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3),

not more than 1 % preservatives

0 %

-

31.12.2025

0.8145

ex 3905 91 00

60

Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight:

27 % or more but not more than 33 % of copolymer,

not more than 1,5 % of ethanol (CAS RN 64-17-5),

not more than 1 % of preservatives

0 %

-

31.12.2025

0.8138

ex 3905 91 00

70

Aqueous solution, containing by weight:

25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-2),

10 % or more but not more than 16 % of ethanol (CAS RN 64-17-5) whether or not denatured with tert-butyl alcohol (CAS RN 75-65-0) and/or denatonium benzoate (CAS RN 3734-33-6)

0 %

-

31.12.2025

0.8139

ex 3905 91 00

80

Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0)

0 %

-

31.12.2025

0.8097

ex 3910 00 00

75

Copolymer of 80 % dimethylsiloxane, 10 % methyl methacrylate and 10 % butyl acrylate in the form of a white powder

0 %

-

31.12.2025

0.8116

ex 3917 31 00

ex 3917 32 00

ex 3917 39 00

30

20

20

Tubings:

with an outer diameter of 0,33 mm or more but not more than 3,3 mm,

with an inner diameter of 0,01 mm or more but not more than 2,1 mm,

suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa,

suitable for all solutions used in chromatography,

whether or not with fused silica,

whether or not covered with PEEK,

for use in chromatographic system

 (1)

0 %

-

31.12.2021

0.8117

ex 3917 40 00

20

Plastic fittings (kit of nuts and ferrules or nuts) and connectors:

threaded,

supported with or without a stainless steel ring,

suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, 

for tubings with:

outer diameter of 0,33 mm or more but not more than 3,3 mm,

suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

suitable for all solutions used in chromatography,

for use in the production of chromatographic systems

 (1)

0 %

-

31.12.2021

0.8109

ex 3919 10 80

48

Plastic strips of polypropylene,

self-adhesive,

unilaterally adhesive-coated with an Acrylic Polymer,

in rolls with a width of 20 cm or less,

with a thickness including adhesion layer of 0,03 mm or less,

for use in the manufacturing of lithium-ion electric rechargeable batteries

 (1)

3.2 %

-

31.12.2021

0.8149

ex 3920 10 89

45

Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels

 (1)

0 %

-

31.12.2022

0.8118

ex 3926 90 97

58

Plastic ferrules and/or plugs:

supported with or without a stainless steel ring,

suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

for tubings with:

outer diameter of 0,33 mm or more but not more than 3,3 mm,

suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

suitable for all solutions used in chromatography,

for use in the production of chromatographic systems

 (1)

0 %

-

31.12.2021

0.8108

ex 5403 31 00

10

Continuous viscose rayon filament yarn of 105 dtex or more but not more than 117 dtex, and consisting of 36 monofilaments or more but not more than 40 monofilaments

0 %

-

31.12.2025

0.8105

ex 8108 90 30

55

Wires of an alloy of titanium:

with a niobium content by weight of 42 % or more but not more than 47 %,

with a diameter of not more than 6 mm,

complying with standard AMS 4982,

for use in the production of aerospace fasteners

 (1)

0 %

-

31.12.2025

0.8148

ex 8412 90 80

20

Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with:

a length of 3,5 m or more but not more than 4,3 m,

a width of 2 m or more but not more than 3,5 m,

a height of 1 m or more but not more than 1,3 m,

a weight of 11 tons or more but not more than 20 tons,

mounting bores for yaw drive,

mounting flange for gearbox support,

drivetrain mount,

different screw sockets

0 %

p/st

31.12.2025

0.8079

ex 8412 90 80

30

Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with:

a diameter of 2 m or more, but not more than 5 m,

a weight of 2 tons or more but not more than 7 tons

0 %

p/st

31.12.2025

0.8111

ex 8414 30 20

20

Hermetic reciprocating refrigeration compressor, for isobutane:

with a 3-phase permanent magnet brushless motor,

having left side suction connection and Power Factor Correction (PFC) inverter,

with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions

0 %

-

31.12.2025

0.8112

ex 8414 30 20

30

Hermetic reciprocating refrigeration compressor for isobutane as refrigerant:

with a 3-phase permanent magnet brushless motor,

having left side suction connection and Power Factor Correction (PFC) inverter feasible to work from 1 300 rpm up to 4 500 rpm,

with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions

0 %

-

31.12.2025

0.8134

ex 8414 30 20

40

Hermetic reciprocating compressor, for isobutane as refrigerant with:

a Resistance Start Capacitor Run (RSCR) single phase motor,

a general coefficient of performance factor not lower than 1,93 at ASHRAE conditions,

a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions

0 %

-

31.12.2025

0.8135

ex 8414 30 20

50

Hermetic reciprocating compressor, for isobutane as refrigerant with:

a Resistance Start Capacitor Run (RSCR) single phase motor,

a general coefficient of performance factor not higher than 1,5 at ASHRAE conditions,

a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions

0 %

-

31.12.2025

0.8133

ex 8414 80 73

40

Hermetic heat pump compressor, for R134A or R450A as refrigerant:

with the Single Phase Induction Motor PSC (Permanent Split Capacitor),

having bottom side suction connection and top side discharge connection,

8,1 cm3 or 8,2 cm3 displacement,

running at 3000 rpm,

with a cooling capacity of 920 W or higher, but not higher than 970 W in ASHRAE conditions

0 %

-

31.12.2025

0.8123

ex 8479 89 97

28

Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with:

electronic brake assistants,

hydraulic unit driven by brushless electric motor,

brake fluid reservoir,

for use in the manufacture of plug-in hybrid passenger cars

 (1)

0 %

-

31.12.2025

0.7962

ex 8479 90 70

50

Rotor part of the mechanical unit ensuring the movement of the camshaft compared to the crankshaft:

with 4 blades that end in grooves,

made of steel alloy with sintering process

0 %

-

31.12.2025

0.8098

ex 8482 50 00

20

Axial roller bearing made of steel:

the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98,

the rollers are made of anti-friction steel according to ASTM 295-94,

with an external diameter of 63 mm or more but not more than 66 mm,

with an internal diameter of 44 mm or more but not more than 46 mm,

with a weight of 23 g or more but not more than 27 g,

with 36 rollers or more but not more than 38 rollers

0 %

p/st

31.12.2025

0.8088

ex 8482 99 00

40

Inner and outer rings made of steel, not grinded, with an internal raceway, with diameters of:

14,66 mm or more but not more than 76,2 mm for the inner ring, and

26 mm or more but not more than 100 mm for the outer ring

0 %

-

31.12.2025

0.8100

ex 8483 50 80

20

Pulley blocks of non-cast steel:

made of structural carbon steel complying with standard JIS G4051,

with an external diameter of 114 mm or more but not more than 118 mm,

with an internal diameter of 33 mm or more but not more than 37 mm,

with a width of 29 mm or more but not more than 33 mm,

with a weight of 0,6 kg or more but not more than 0,9 kg,

with 6 trapezoidal grooves

0 %

p/st

31.12.2025

0.8130

ex 8501 62 00

40

AC, 3-phase generator, with:

a continuous power of 147 kVA or more but not more than 222 kVA,

a continuous torque of 650 Nm or more but not more than 900 Nm,

a maximum working speed of 2700 revolutions per minute (rpm),

a liquid cooled system,

a length of 100 mm or more but not more than 200 mm,

a width of 550 mm or more but not more than 650 mm,

a height of 550 mm or more but not more than 650 mm,

weighing of not more than 150 kg

0 %

-

31.12.2025

0.8095

ex 8505 90 90

20

Electromagnetic clutch coil in a cylindrical metal housing:

the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE,

the coil is made of copper wire,

with a weight of 0,4 kg or more but not more than 0,7 kg,

with a width of 22 mm or more but not more than 25 mm,

with a plate reinforced to the coil (coil backplate) with an internal diameter of 44 mm or more but not more than 46 mm,

with an external diameter of 88 mm or more but not more than 96 mm,

without plunger,

with one connector

0 %

p/st

31.12.2025

0.8115

ex 8507 60 00

48

Integrated battery system in a metal case with holders, consisting of:

a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy of 0,6 kWh,

Battery Management System,

a power relay,

a cooling system,

four connectors,

for use in the manufacture of Mild-hybrid (mHEV) motor vehicles

 (1)

1.3 %

-

31.12.2021

0.8140

ex 8529 90 92

73

CMOS-Image sensor

with a micro lens on every pixel (micro lens coverage at least 99 % of all pixel),

to capture infra-red light reflected from objects,

in order to capture depth images in the cameras built for distance measurements (Time-of-Flight)

0 %

-

31.12.2025

0.8085

ex 8537 10 91

45

Main hybrid system controller, diagnosing and controlling the elements of the hybrid propulsion system, with:

a programmable memory,

a microprocessor,

at least one composite connector,

a voltage of 24 V,

with a length of 350 mm or more but not more than 400 mm,

with a width of 200 mm or more but not more than 250 mm,

with a height of 80 mm or more but not more than 120 mm,  

in a metal housing

0 %

-

31.12.2025

0.8132

ex 8537 10 98

80

Propulsion Control System with at least:

a DC/AC inverter,

a power of 190 kW or more but not more than 220 kW,

a high voltage circuits with AC and DC interfaces for connecting a traction motor, generator and energy storage system,

an integral control of all drive motor and generator traction system functions,

a CAN communications interface with System Control Unit,

a liquid cooled system,

a length of 300 mm or more but not more than 950 mm,

a width of 350 mm or more but not more than 600 mm,

a height of 200 mm or more but not more than 350 mm,

a weight of 40 kg or more but not more than 90 kg​

0 %

p/st

31.12.2025

0.8124

ex 8537 10 98

88

Control panel for car radio and/or navigation control with:

electronic passive components,

at least two switches,

LEDs,

at least one connector,

whether or not warning triangle switch,

for a voltage not exceeding 16 V,

for use in the manufacture of goods of Chapter 87

 (1)

0 %

-

31.12.2025

0.8127

ex 8708 99 97

28

A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames:

cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,

with an operating pressure of not less than 35 MPa,

with a durability declared by the manufacturer of not less than 20 years,

with a cylinder capacity of 180 liters or more but not more than 375 liters,

equipped with a set of solenoid, manual and safety PRD valves,

with a total width of 1 800 mm or more but not more than 2 300 mm,

with a total height of 400 mm or more but not more than 500 mm,

with a total length of 1 200 mm or more but not more than 3 600 mm

0 %

-

31.12.2025

0.8128

ex 8708 99 97

38

A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames:

made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,

with an operating pressure of not less than 20 MPa,

with a shelf life declared by the manufacturer of not less than 20 years,

with a cylinder capacity of 315 liters or more but not more than 375 liters,

equipped with a set of solenoid, manual and safety PRD valves,

with a total width of 2 200 mm or more but not more than 2 300 mm,

with a total height of 450 mm or more but not more than 460 mm,

with a total length of  3500 mm or more but not more than 3 600 mm

0 %

-

31.12.2025’

(1)

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)’

Top