EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 52020PC0737

Proposal for a COUNCIL REGULATION amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

COM/2020/737 final

Brussels, 18.11.2020

COM(2020) 737 final

2020/0328(NLE)

Proposal for a

COUNCIL REGULATION

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products


EXPLANATORY MEMORANDUM

1.CONTEXT OF THE PROPOSAL

Reasons for and objectives of the proposal

In order to ensure sufficient and uninterrupted supplies of certain agricultural and industrial products which are insufficiently produced or not produced at all in the Union and to avoid any disturbances on the market for these products, some autonomous Common Customs Tariff duties have been partially or totally suspended by Council Regulation (EU) No 1387/2013 (hereinafter "the Regulation").

The Regulation is updated every six months to accommodate the needs of Union industry. The Commission, assisted by the Economic Tariff Questions Group, has reviewed all requests from the Member States for autonomous tariff suspensions.

Following this review, the Commission considers that the suspension of duties is justified for some new products, currently not listed in the Annex of the Regulation. In relation to some other products, it is necessary to modify the conditions in terms of product description, classification, duty rates, end-use requirement or date foreseen for mandatory review. Products for which a tariff suspension is no longer in the Union's economic interest are proposed to be withdrawn.

Consistency with existing policy provisions in the policy area

This proposal does not affect countries that have a preferential trading agreement with the Union nor - candidate countries or potential candidates for preferential agreements with the Union (e.g. Generalised System of Preferences; the African, Caribbean and Pacific group trade regime; Free Trade Agreements).

Consistency with other Union policies

The proposal is in line with Union policies in the area of agriculture, trade, enterprise, environment, development and external relations.

2.LEGAL BASIS, SUBSIDIARITY AND PROPORTIONALITY

Legal basis

The legal basis of this proposal is Article 31 of the Treaty on the Functioning of the European Union (TFEU).

Subsidiarity (for non-exclusive competence)

The proposal falls under the exclusive competence of the Union. The subsidiarity principle therefore does not apply.

Proportionality

The proposal complies with the principle of proportionality. The measures envisaged are in line with the principles for simplifying procedures for operators engaged in foreign trade, as stated in the Commission communication concerning autonomous tariff suspensions and quotas 1 . This Regulation does not go beyond what is necessary to achieve the objectives pursued in accordance with Article 5(4) of the Treaty on European Union (TEU).

Choice of the instrument

By virtue of Article 31 of the TFEU, "Common Customs Tariff duties shall be fixed by the Council on a proposal from the Commission". Therefore, a Council regulation is the appropriate instrument.

3.RESULTS OF EX-POST EVALUATIONS, STAKEHOLDER CONSULTATIONS AND IMPACT ASSESSMENTS

Ex-post evaluations/fitness checks of existing legislation

The autonomous suspensions scheme was subject to an evaluation study carried out in 2013. The evaluation concluded that the core rationale for the scheme remains valid. The cost savings for EU businesses importing goods under the scheme can be significant. In turn, depending on the product, company and sector, these savings can have wider benefits, such as boosting competitiveness, making production methods more efficient, and creating or keeping jobs in the Union. Details of the savings of this regulation can be found in the attached legislative financial statement.

Stakeholder consultations

The Economic Tariff Questions Group, which consists of delegations from all Member States plus Turkey, assisted the Commission to assess this proposal. The group met three times before agreeing the changes in this proposal.

It carefully assessed each request (new, an amendment or deletion). It particularly examined each case to ensure that it was not causing any harm to Union producers and was strengthening and consolidating the competitiveness of Union's production. The members of the Economic Tariff Questions Group carried out the assessment through discussions, and Member States consulted the concerned industries, associations, chambers of commerce and other stakeholders involved.

All listed tariff suspensions were the subject of agreements or compromises reached in the discussions held at the Economic Tariff Questions Group. No potentially serious risks with irreversible consequences were mentioned.

Impact assessment

The proposed amendment is of a purely technical nature and concerns only the coverage of suspensions listed in the Annex to Council Regulation (EU) No 1387/2013. Therefore, no impact assessment was carried out for this proposal.

Fundamental rights

The proposal has no consequences on fundamental rights.

4.BUDGETARY IMPLICATIONS

This proposal has no financial impact on expenditure, but has a financial impact on revenue. Uncollected customs duties corresponding to the suspension amount approximately EUR 47,6 million per year. The negative effect on the budget’s traditional own resources is EUR 38,1 million per year (i.e. 80 % of the total). The legislative financial statement sets out the budgetary implications of the proposal in greater detail.

The loss of revenue in traditional own resources shall be compensated by Member States Gross National Income (GNI) based on resource contributions.

5.OTHER ELEMENTS

Implementation plans and monitoring, evaluation and reporting arrangements

The measures proposed are managed within the framework of the Integrated Tariff of the European Union (TARIC) and applied by customs administrations of the Member States.

2020/0328 (NLE)

Proposal for a

COUNCIL REGULATION

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances in the market for those products, Common Customs Tariff (CCT) duties of the type referred to in Article 56(2)(c) of Regulation (EU) No 952/2013 of the European Parliament and of the Council 2 on those products have been suspended by Council Regulation (EU) No 1387/2013 3 . Those products can be imported into the Union at reduced or zero duty rates.

(2)The Union production of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013 is inadequate or non-existent. It is therefore in the interest of the Union to suspend totally the CCT duties on those products.

(3)With a view to promoting integrated battery production in the Union in accordance with the Communication from the Commission of 17 May 2018 entitled ‘Europe on the Move – Sustainable Mobility for Europe: safe, connected, and clean’ 4 , a partial suspension of the CCT duties should be granted in respect of certain products that are not listed in the Annex to Regulation (EU) No 1387/2013. In addition, only a partial suspension of the CCT duties should be granted in respect of certain products that are currently subject to complete suspensions. The date for the mandatory review of those suspensions should be 31 December 2021, in order for that review to have regard to the evolution of the battery sector in the Union.

(4)It is necessary to amend the product description, classification and end-use requirement for certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013 in order to take into account technical product developments and economic trends in the market.

(5)A review has been undertaken of certain CCT duty suspensions listed in the Annex to Regulation (EU) No 1387/2013. New dates should therefore be set for their next mandatory review.

(6)It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) No 1387/2013. The suspensions for those products should therefore be withdrawn. Moreover, according to the Communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas 5 , for practical reasons, requests for tariff suspensions or quotas where the amount of uncollected customs duty is estimated to be less than EUR 15 000 per year cannot be taken into consideration. The suspensions for products which do not reach that threshold, as indicated by the mandatory review, should therefore be withdrawn from the Annex to Regulation (EU) No 1387/2013.

(7)Regulation (EU) No 1387/2013 should therefore be amended accordingly.

(8)In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the Communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 January 2021. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1

The Annex to Regulation (EU) No 1387/2013 is amended in accordance with the Annex to this Regulation.

Article 2

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 January 2021.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels,

   For the Council

   The President

LEGISLATIVE FINANCIAL STATEMENT

1.1. NAME OF THE PROPOSAL:

Council Regulation amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products

2.BUDGET LINES:

Chapter and Article: Chapter 12, Article 120

Amount budgeted for the year 2021: 17 605 700 000

3.FINANCIAL IMPACT

   Proposal has no financial implications

X Proposal has no financial impact on expenditure but has a financial impact on revenue -the effect is as follows:

(EUR million to one decimal place)

Budget line

Revenue

12 month period, starting dd/mm/yyyy

[Year 2021]

Article 120

Impact on own resources

01/01/2021

-38,1

Situation following action

[2021 – 2025]

Article 120

- 38,1 EUR million/ year

The Annex contains 83 new products. The uncollected duties corresponding to these suspensions, calculated on the basis of requesting Member State projections for the period 2021 to 2025, amount to EUR 37,6 million per year.

On the basis of the existing statistics for preceding years, it would appear, however, necessary to increase this amount by an average factor, estimated at 1,8 to take account of imports into other Member States using the same suspensions. This means uncollected duties of some EUR 67,7 million per year.

The zero duty rate for four existing suspensions was increased. This represents an increase of EUR 0,3 million per year in the collection of duties, as estimated on the basis of 2019 statistics.

116 products have been withdrawn from this Annex reflecting the reintroduction of customs duties. This represents an increase of EUR 19,8 million per year in the collection of duties, as estimated on the basis of 2019 statistics.

On the basis of the above, the impact on the loss of revenue for the EU budget resulting from this Regulation is estimated at 67,7 – 19,8 – 0,3 = EUR 47,6 million (gross amount, including collection costs) x 0,8 = EUR 38,1 million per year for the period 01.01.2021 - 31.12.2025.

4.ANTI-FRAUD MEASURES

Checks on the end-use of some of the products covered by this Council Regulation will be carried out in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code.

In addition, Member States may carry out any customs controls they deem appropriate under the risk management they undertake, as provided for by Article 46 of Regulation (EU) n° 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code.

(1)    OJ C 363, 13.12.2011, p. 6.
(2)    Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).
(3)    Council Regulation (EU) No 1387/2013 of 17 December 2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products and repealing Regulation (EU) No 1344/2011 (OJ L 354, 28.12.2013, p. 201).
(4)    COM(2018) 293 final
(5)    OJ C 363, 13.12.2011, p. 6.
Top

Brussels, 18.11.2020

COM(2020) 737 final

ANNEX

to the

Proposal for a COUNCIL REGULATION

amending Regulation (EU) No 1387/2013 suspending the autonomous Common Customs Tariff duties on certain agricultural and industrial products


ANNEX

The Annex to Regulation (EU) No 1387/2013 is amended as follows:

(1)the rows having the following serial numbers are deleted:

0.3338, 0.3662, 0.4675, 0.4795, 0.4856, 0.4891, 0.4902, 0.4903, 0.4905, 0.4908, 0.4911, 0.4920, 0.4926, 0.4935, 0.4939, 0.4943, 0.4973, 0.4995, 0.5012, 0.5022, 0.5039, 0.5043, 0.5052, 0.5053, 0.5067, 0.5092, 0.5103, 0.5123, 0.5125, 0.5126, 0.5311, 0.5498, 0.5953, 0.6036, 0.6068, 0.6087, 0.6450, 0.6527, 0.6591, 0.6592, 0.6595, 0.6596, 0.6597, 0.6606, 0.6607, 0.6608, 0.6610, 0.6615, 0.6616, 0.6619, 0.6626, 0.6636, 0.6639, 0.6651, 0.6653, 0.6665, 0.6676, 0.6694, 0.6697, 0.6704, 0.6705, 0.6715, 0.6724, 0.6727, 0.6731, 0.6733, 0.6735, 0.6743, 0.6744, 0.6755, 0.6756, 0.6758, 0.6760, 0.6768, 0.6775, 0.6776, 0.6778, 0.6780, 0.6785, 0.6786, 0.6787, 0.6788, 0.6795, 0.6798, 0.6803, 0.6807, 0.6811, 0.6832, 0.6833, 0.6834, 0.6838, 0.6841, 0.6883, 0.6890, 0.6895, 0.6900, 0.6902, 0.6909, 0.6914, 0.6916, 0.6918, 0.6928, 0.6941, 0.6942, 0.6943, 0.6944, 0.6953, 0.6954, 0.7040, 0.7222, 0.7293, 0.7558, 0.7560, 0.7697, 0.7715 and 0.7855;

(2)the rows set out in the table below replace those in the Annex to Regulation (EU) No 1387/2013 having the same serial numbers:

Serial Number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

‘0.6748

ex 0709 59 10

10

Fresh or chilled chanterelles for treatment other than simple repacking for retail sale (1)(2)

0 %

-

31.12.2025

0.2864

ex 1511 90 19

ex 1511 90 91

ex 1513 11 10

ex 1513 19 30

ex 1513 21 10

ex 1513 29 30

20

20

20

20

20

20

Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:

industrial monocarboxylic fatty acids of subheading 3823 19 10,

methyl esters of fatty acids of heading 2915 or 2916,

fatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products,

fatty alcohols of subheading 2905 16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,

stearic acid of subheading 3823 11 00,

goods of heading 3401, or

fatty acids with high purity of heading 2915

(2)

0 %

-

31.12.2021

0.6789

ex 1512 19 10

10

Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture of

conjugated linoleic acid of heading 3823 or

ethyl- or methyl esters of linoleic acid of heading 2916

 (2)

0 %

-

31.12.2022

0.5004

ex 2008 99 48

94

Mango puree:

not from concentrate,

of the genus Mangifera,

of a Brix value of 14 or more, but not more than 20

used in the manufacture of products of drink industry (2)

6 %

-

31.12.2022

0.4709

ex 2008 99 49

ex 2008 99 99

30

40

Seedless boysenberry puree not containing added spirit, whether or not containing added sugar

0 %

-

31.12.2025

0.6723

ex 2008 99 91

20

Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking

 (1)(2)

0 % (3)

-

31.12.2025

0.4992

ex 2009 41 92

ex 2009 41 99

20

70

Pineapple juice:

not from concentrate,

of the genus Ananas,

of a Brix value of 11 or more but not more than 16,

used in the manufacture of products of drink industry (2)

8 %

-

31.12.2025

0.7393

ex 2712 90 99

10

Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms

0 %

-

31.12.2022

0.6658

ex 2805 12 00

10

Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)

0 %

-

31.12.2025

0.4979

2805 30 20

2805 30 30

2805 30 40

Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more

0 %

-

31.12.2025

0.6836

ex 2811 22 00

15

Amorphous silicon dioxide (CAS RN 60676-86-0),

in the form of powder

of a purity by weight of 99,0 % or more

with a median grain size of 0,7 μm or more, but not more than 2,1 μm

where 70 % of the particles have a diameter of not more than 3 μm

0 %

-

31.12.2022

0.5110

ex 2818 10 91

20

Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:

94 % or more, but less than 98,5 % of aluminium oxide,

2 % (± 1,5 %) of magnesium oxide,

1 % (± 0,6 %) of yttrium oxide,

and

either 2 % (± 1,2 %) of lanthanum oxide or

2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,

with less than 50 % of the total weight having a particle size of more than 10 mm

0 %

-

31.12.2025

0.6837

ex 2818 30 00

20

Aluminium hydroxide (CAS RN 21645-51-2)

in the form of powder,

with a purity by weight of 99,5 % or more,

with a decomposition point of 263°C or more,

with a particle size of 4 µm (± 1 µm),

with a Total-Na2O-content by weight of not more than 0,06 %

0 %

-

31.12.2025

0.7897

ex 2825 20 00

10

Lithium hydroxide monohydrate (CAS RN 1310-66-3)

2.6 %

-

31.12.2021

0.6819

ex 2825 50 00

30

Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm

0 %

-

31.12.2025

0.5055

ex 2826 19 90

10

Tungsten hexafluoride (CAS RN  7783-82-6)  with a purity by weight of 99,9 % or more

0 %

-

31.12.2025

0.5090

ex 2833 29 80

30

Zirconium sulphate (CAS RN 14644-61-2)

0 %

-

31.12.2021

0.6632

ex 2840 20 90

10

Zinc borate (CAS RN 12767-90-7)

0 %

-

31.12.2025

0.7288

ex 2841 50 00

11

Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more

2 %

-

31.12.2021

0.4222

ex 2841 90 85

10

Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 %

2.7 %

-

31.12.2021

0.3419

ex 2850 00 20

80

Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more

0 %

-

31.12.2024

0.6633

2903 39 21

Difluoromethane (CAS RN 75-10-5)

0 %

-

31.12.2025

0.2583

ex 2903 89 80

45

1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10]octadeca-7,15-diene (CAS RN 13560-89-9) with a purity by weight of 99 % or more

2 %

-

31.12.2021

0.6611

ex 2903 99 80

15

4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)

0 %

-

31.12.2025

0.3409

ex 2904 20 00

10

Nitromethane (CAS RN 75-52-5)

0 %

-

31.12.2025

0.3391

ex 2904 20 00

20

Nitroethane (CAS RN 79-24-3)

0 %

-

31.12.2022

0.3408

ex 2904 20 00

30

1-Nitropropane (CAS RN 108-03-2)

0 %

-

31.12.2025

0.6612

ex 2904 99 00

25

Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)

0 %

-

31.12.2025

0.6613

ex 2904 99 00

35

1-Fluoro-4-nitrobenzene (CAS RN 350-46-9)

0 %

-

31.12.2025

0.4934

ex 2905 39 95

10

Propane-1,3-diol (CAS RN 504-63-2)

0 %

-

31.12.2025

0.6757

ex 2906 29 00

40

2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0)

0 %

-

31.12.2022

0.6782

ex 2908 19 00

40

3,4,5-Trifluorophenol (CAS RN 99627-05-1)

0 %

-

31.12.2025

0.6915

ex 2908 19 00

50

4-Fluorophenol (CAS RN 371-41-5)

0 %

-

31.12.2025

0.6649

ex 2909 30 38

30

1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)

0 %

-

31.12.2025

0.5117

ex 2909 30 90

30

3,4,5-Trimethoxytoluene (CAS RN 6443-69-2)

0 %

-

31.12.2025

0.6614

ex 2909 30 90

40

1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)

0 %

-

31.12.2025

0.6783

ex 2909 30 90

50

1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)

0 %

-

31.12.2025

0.6784

ex 2909 30 90

60

1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)

0 %

-

31.12.2025

0.6927

ex 2909 49 80

10

1-Propoxypropan-2-ol (CAS RN 1569-01-3)

0 %

-

31.12.2021

0.6660

ex 2910 90 00

50

2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)

0 %

-

31.12.2025

0.5135

ex 2912 49 00

30

Salicylaldehyde (CAS RN 90-02-8)

0 %

-

31.12.2025

0.6678

ex 2912 49 00

40

3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)

0 %

-

31.12.2025

0.4933

ex 2914 29 00

30

(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)

0 %

-

31.12.2025

0.4932

ex 2914 50 00

20

3’-Hydroxyacetophenone (CAS RN 121-71-1)

0 %

-

31.12.2025

0.6762

ex 2914 50 00

75

7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7)

0 %

-

31.12.2022

0.4948

ex 2914 79 00

60

4’-tert-Butyl-2’,6’-dimethyl-3’,5’-dinitroacetophenone (CAS RN 81-14-1)

0 %

-

31.12.2021

0.5119

ex 2915 39 00

60

Dodec-8-enyl acetate (CAS RN 28079-04-1)

0 %

-

31.12.2025

0.5121

ex 2915 39 00

65

Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)

0 %

-

31.12.2025

0.5120

ex 2915 39 00

70

Dodec-9-enyl acetate (CAS RN 16974-11-1)

0 %

-

31.12.2025

0.7541

ex 2915 90 30

10

Methyl laurate (CAS RN 111-82-0)

0 %

-

31.12.2025

0.4954

ex 2915 90 70

60

Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)

0 %

-

31.12.2025

0.3466

ex 2916 13 00

30

Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities

0 %

-

31.12.2025

0.4931

ex 2916 20 00

60

3-Cyclohexylpropionic acid (CAS RN 701-97-3)

0 %

-

31.12.2025

0.4930

ex 2916 39 90

30

2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)

0 %

-

31.12.2025

0.6794

ex 2916 39 90

41

4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)

0 %

-

31.12.2025

0.6661

ex 2916 39 90

53

5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)

0 %

-

31.12.2025

0.4918

ex 2917 19 80

50

Tetradecanedioic acid (CAS RN 821-38-5)

0 %

-

31.12.2025

0.4945

ex 2917 39 95

20

Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)

0 %

-

31.12.2025

0.6796

ex 2917 39 95

25

Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)

0 %

-

31.12.2025

0.3640

ex 2917 39 95

30

Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)

0 %

-

31.12.2025

0.6800

ex 2917 39 95

35

1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)

0 %

-

31.12.2025

0.6814

ex 2918 99 90

13

3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)

0 %

-

31.12.2025

0.6901

ex 2918 99 90

18

Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)

0 %

-

31.12.2025

0.6747

ex 2918 99 90

85

Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more

0 %

-

31.12.2025

0.5038

ex 2920 29 00

20

Tris(methylphenyl)phosphite (CAS RN 25586-42-9)

0 %

-

31.12.2025

0.5045

ex 2920 29 00

40

Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)

0 %

-

31.12.2025

0.7559

ex 2920 90 10

15

Ethyl methyl carbonate (CAS RN 623-53-0)

3.2 %

-

31.12.2021

0.6598

ex 2920 90 70

80

Bis(pinacolato)diboron (CAS RN 73183-34-3)

0 %

-

31.12.2025

0.4917

ex 2921 29 00

40

Decamethylenediamine (CAS RN 646-25-3)

0 %

-

31.12.2025

0.4862

ex 2921 30 99

30

1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)

0 %

-

31.12.2021

0.5124

ex 2921 43 00

60

3-Aminobenzotrifluoride (CAS RN 98-16-8)

0 %

-

31.12.2025

0.6825

ex 2921 49 00

60

2,6-Diisopropylaniline (CAS RN 24544-04-5)

0 %

-

31.12.2025

0.6947

ex 2922 19 00

35

2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)

0 %

-

31.12.2025

0.6624

ex 2922 29 00

30

1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)

0 %

-

31.12.2025

0.6634

ex 2922 29 00

63

Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.4956

ex 2922 29 00

75

4-(2-Aminoethyl)phenol (CAS RN 51-67-2)

0 %

-

31.12.2025

0.4914

ex 2922 39 00

20

2-Amino-5-chlorobenzophenone (CAS RN 719-59-5)

0 %

-

31.12.2025

0.6761

ex 2922 39 00

35

5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)

0 %

-

31.12.2025

0.7853

ex 2922 49 85

13

Benzyl glycinate—4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93 % or more

0 %

-

31.12.2024

0.5037

ex 2922 49 85

17

Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)

0 %

-

31.12.2025

0.6948

ex 2922 49 85

30

Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)

0 %

-

31.12.2021

0.6650

ex 2922 49 85

65

Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6)

0 %

-

31.12.2025

0.5063

ex 2923 90 00

75

Tetraethylammonium hydroxide, in the form of an aqueous solution containing:

35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,

not more than 1 000 mg/kg of chloride,

not more than 2 mg/kg of iron and

not more than 10 mg/kg of potassium

0 %

-

31.12.2025

0.3689

ex 2924 19 00

23

Acrylamide (CAS RN 79-06-1) with a purity by weight of 97 % or more

2 %

-

31.12.2021

0.5066

ex 2924 29 70

40

N,N’-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)

0 %

-

31.12.2025

0.5127

ex 2924 29 70

45

Propoxur (ISO) (CAS RN 114-26-1)

0 %

-

31.12.2025

0.5069

ex 2924 29 70

55

N,N’-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)

0 %

-

31.12.2025

0.6767

ex 2924 29 70

62

2-Chlorobenzamide (CAS RN 609-66-5)

0 %

-

31.12.2025

0.6766

ex 2924 29 70

64

N-(3',4'-dichloro-5-fluoro[1,1’-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8)

0 %

-

31.12.2025

0.6934

ex 2926 90 70

17

Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more

0 %

-

31.12.2025

0.6259

ex 2926 90 70

26

Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products

 (2)

0 %

-

31.12.2024

0.6871

ex 2928 00 90

23

Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.4929

ex 2928 00 90

25

Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution

0 %

-

31.12.2025

0.6635

ex 2928 00 90

50

Aqueous solution of 2,2’-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %

0 %

-

31.12.2025

0.5035

ex 2930 90 98

10

2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)

0 %

-

31.12.2022

0.6769

ex 2930 90 98

22

Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more

0 %

-

31.12.2025

0.6873

ex 2930 90 98

26

Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more

0 %

-

31.12.2025

0.6617

ex 2930 90 98

53

Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)

0 %

-

31.12.2025

0.5114

ex 2930 90 98

55

Thiourea (CAS RN 62-56-6)

0 %

-

31.12.2025

0.6917

ex 2931 90 00

63

Chloroethenyldimethylsilane (CAS RN 1719-58-0)

0 %

-

31.12.2021

0.6946

ex 2931 90 00

65

Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6)

0 %

-

31.12.2021

0.6620

ex 2932 20 90

65

Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)

0 %

-

31.12.2025

0.7639

ex 2932 99 00

27

(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more

0 %

-

31.12.2023

0.4907

ex 2932 99 00

50

7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)

0 %

-

31.12.2021

0.6771

ex 2932 99 00

65

4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)

0 %

-

31.12.2025

0.7811

ex 2933 19 90

33

Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine

 (2)

0 %

-

31.12.2024

0.6835

ex 2933 21 00

55

1-Aminohydantoin hydrochloride (CAS RN 2827-56-7)

0 %

-

31.12.2025

0.5115

ex 2933 21 00

80

5,5-Dimethylhydantoin (CAS RN 77-71-4)

0 %

-

31.12.2025

0.6812

ex 2933 39 99

14

N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)

0 %

-

31.12.2022

0.4842

ex 2933 39 99

20

Copper pyrithione powder (CAS RN 14915-37-8)

0 %

-

31.12.2021

0.6813

ex 2933 39 99

26

2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)

0 %

-

31.12.2022

0.5129

ex 2933 39 99

85

2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)

0 %

-

31.12.2025

0.6773

ex 2933 49 10

50

1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)

0 %

-

31.12.2025

0.4927

ex 2933 49 90

30

Quinoline (CAS RN 91-22-5)

0 %

-

31.12.2025

0.6763

ex 2933 59 95

21

N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)

0 %

-

31.12.2025

0.6677

ex 2933 59 95

47

6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more

0 %

-

31.12.2025

0.6774

ex 2933 69 80

13

Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more

0 %

-

31.12.2025

0.6621

ex 2933 69 80

15

2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)

0 %

-

31.12.2025

0.6951

ex 2933 69 80

17

Benzoguanamine (CAS RN 91-76-9)

0 %

-

31.12.2021

0.5131

ex 2933 69 80

55

Terbutryn (ISO) (CAS RN 886-50-0)

0 %

-

31.12.2025

0.4957

ex 2933 69 80

60

Cyanuric acid (CAS RN 108-80-5)

0 %

-

31.12.2025

0.4985

ex 2933 79 00

70

(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN  754186-36-2)

0 %

-

31.12.2025

0.6872

ex 2933 99 80

16

Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more

0 %

-

31.12.2025

0.6829

ex 2933 99 80

21

1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)

0 %

-

31.12.2025

0.6599

ex 2933 99 80

54

3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)

0 %

-

31.12.2025

0.6933

ex 2933 99 80

87

Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more

0 %

-

31.12.2025

0.4955

ex 2934 20 80

60

Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)

0 %

-

31.12.2022

0.4910

ex 2934 20 80

70

N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)

0 %

-

31.12.2025

0.4942

ex 2934 99 90

25

2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)

0 %

-

31.12.2025

0.6824

ex 2934 99 90

39

4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)

0 %

-

31.12.2025

0.6823

ex 2934 99 90

41

11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)

0 %

-

31.12.2025

0.6893

ex 2934 99 90

44

Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more

0 %

-

31.12.2025

0.5133

ex 2934 99 90

86

Dithianon (ISO) (CAS RN 3347-22-6)

0 %

-

31.12.2025

0.5136

ex 2934 99 90

87

2,2’-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)

0 %

-

31.12.2025

0.5036

ex 2935 90 90

42

Penoxsulam (ISO) (CAS RN 219714-96-2)

0 %

-

31.12.2025

0.6777

ex 2935 90 90

54

Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.6802

ex 2935 90 90

56

N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)

0 %

-

31.12.2025

0.6903

ex 2935 90 90

57

N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)

0 %

-

31.12.2025

0.6664

ex 2935 90 90

59

Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more

0 %

-

31.12.2025

0.4944

ex 2938 90 30

10

Ammonium glycyrrhizate (CAS RN 53956-04-0)

0 %

-

31.12.2025

0.6600

ex 3201 90 90

ex 3202 90 00

40

10

Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)

0 %

-

31.12.2021

0.5091

ex 3204 11 00

20

Colourant C.I. Disperse Yellow 241 (CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241 content of 97 % or more by weight

0 %

-

31.12.2021

0.5134

ex 3204 11 00

45

Preparation of dispersion dyes, containing:

C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),

C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),

C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),

whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)

0 %

-

31.12.2025

0.6652

ex 3204 12 00

70

Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight

0 %

-

31.12.2025

0.6603

ex 3204 17 00

33

Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight

0 %

-

31.12.2025

0.5100

ex 3204 19 00

73

Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight

0 %

-

31.12.2021

0.6726

ex 3208 90 19

55

Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent

0 %

-

31.12.2021

0.5031

ex 3215 90 70

40

Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:

wax;

a vinyl-based polymer and

a colouring agent

for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices

 (2)

0 %

-

31.12.2025

0.4863

ex 3402 11 90

10

Sodium lauroyl methyl isethionate

0 %

-

31.12.2021

0.6725

ex 3506 91 90

50

Preparation containing by weight:

15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers and

10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers

dissolved in :

Methyl ethyl ketone (CAS RN 78-93-3)

Heptane (CAS RN 142-82-5), and

Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)

0 %

-

31.12.2021

0.6759

ex 3802 10 00

10

Mixture of activated carbon and polyethylene, in form of powder

0 %

-

31.12.2025

0.6874

ex 3808 92 30

10

Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more

 (1)

0 %

-

31.12.2025

0.5048

ex 3808 93 90

20

Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:

1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine

of a kind used in plant growth regulators

0 %

-

31.12.2025

0.5030

ex 3808 93 90

30

Aqueous solution containing by weight:

1,8 % of sodium para-nitrophenolate,

1,2 % of sodium ortho-nitrophenolate,

0,6 % of sodium 5-nitroguaiacolate

for use in the manufacture of a plant growth regulator  (2)

0 %

-

31.12.2022

0.5088

ex 3808 93 90

50

Preparation in the form of powder, containing by weight:

55 % or more of Gibberellin A4,

1 % or more but not more than 35 % of Gibberellin A7,

90 % or more of Gibberellin A4 and Gibberellin A7 combined

not more than 10 % of a combination of water and other naturally occurring Gibberellins

of a kind used in plant growth regulators

0 %

-

31.12.2021

0.6532

ex 3808 94 20

30

Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:

1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),

1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),

1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or

1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)

0 %

-

31.12.2024

0.6904

ex 3811 21 00

12

Dispersing agent containing :

esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),

35 % or more but not more than 55 % by weight of mineral oils and

with a chlorine content of not more than 0,05 % by weight,

used in the manufacture of blends of additives for lubricating oils (2)

0 %

-

31.12.2025

0.6906

ex 3811 21 00

14

Dispersing agent :

containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),

containing 35 % or more but not more than 55 % by weight of mineral oils,

with a chlorine content by weight of not more than 0,05 %, 

having a total base number of less than 15,

used in the manufacture of blends of additives for lubricating oils (2)

0 %

-

31.12.2025

0.6907

ex 3811 21 00

16

Detergent containing :

Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)

40 % or more but not more than 60 % by weight of mineral oils and

having a total base number more than 120

used in the manufacture of blends of additives for lubricating oils  (2)

0 %

-

31.12.2025

0.6905

ex 3811 21 00

18

Detergent containing :

long chain alkyltoluene calcium  sulphonates,

more than 30 % but not more than 50 % by weight of mineral oils, and

having a total base number of more than 310 but not more  than 340,

used in the manufacture of blends of additives for lubricating oils  (2)

0 %

-

31.12.2025

0.6671

ex 3811 21 00

75

Additives containing:

Calcium (C10-C14) dialkylbenzenesulfonates,

more than 40 %, but not more than 60 % by weight of mineral oils,

with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils (2)

0 %

-

31.12.2022

0.6669

ex 3811 21 00

77

Antifoam additives consisting of:

a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and

more than 50 % but not more than 80 % by weight of mineral oils

for use in the manufacture of  additive blends for lubricating oils

 (2)

0 %

-

31.12.2022

0.6666

ex 3811 21 00

80

Additives containing :

polyisobutylene aromatic polyamine succinimide,

more than 40 % but not more than 60 % by weight of mineral oils,

with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils (2)

0 %

-

31.12.2022

0.6668

ex 3811 29 00

65

Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils (2)

0 %

-

31.12.2022

0.5062

ex 3815 90 90

30

Catalyst, consisting of a suspension in mineral oil of:

tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, and

silicon dioxide

containing 6,6 % (± 0,6 %) by weight of magnesium, and

containing 2,3 % (± 0,2 %) by weight of titanium

0 %

-

31.12.2025

0.2783

ex 3815 90 90

80

Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol

0 %

-

31.12.2025

0.6810

ex 3824 99 92

23

Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol

0 %

-

31.12.2025

0.4909

ex 3824 99 92

29

Preparation containing by weight:

85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and

1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate

0 %

-

31.12.2025

0.6779

ex 3824 99 92

40

Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent

0 %

-

31.12.2025

0.7742

ex 3824 99 92

52

Electrolyte containing:

5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9),

60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6 ) and/or ethyl methyl carbonate (CAS RN 623-53-0),

0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3)

for use in the manufacture of motor vehicle batteries (2)

3.2 %

-

31.12.2021

0.5050

ex 3824 99 92

61

3’,4’,5’-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3’,4’,5’-trifluorobiphenyl-2-amine

0 %

-

31.12.2025

0.6720

ex 3824 99 92

68

Preparation containing by weight:

20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9),

Dissolved in:

10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)

64 %( ±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and

6 % (± 1.0 %) Naphthalene (CAS RN 91-20-3)

0 %

-

31.12.2025

0.6719

ex 3824 99 92

69

Preparation containing by weight:

80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)

7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and

not more than 1 % triphenyl phosphate (CAS RN 115-86-6)

0 %

-

31.12.2021

0.3069

ex 3824 99 92

88

2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)

0 %

-

31.12.2025

0.4719

ex 3824 99 93

35

Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)

0 %

-

31.12.2024

0.7313

ex 3824 99 96

45

Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with:

a particle size of less than 10 μm,

a purity by weight of more than 98 %

3.2 %

-

31.12.2021

0.6628

ex 3824 99 96

46

Manganese zinc ferrite granulate, containing by weight:

52 % or more but not more than 76 % of iron(III)oxide,

13 % or more but not more than 42 % of manganese oxide, and

2 % or more but not more than 22 % of zinc oxide

0 %

-

31.12.2025

0.6749

ex 3824 99 96

48

Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %

 

0 %

-

31.12.2025

0.6897

ex 3901 40 00

30

Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:

more than 10 % but not more than 20 % by weight of copolymer,

a melt flow rate (MFR 190°C/2,16 kg) of 0,7 g / 10 min or more but not more than 0,9 g / 10 min, and

a density (ASTM D4703) of 0,911 g/cm³ or more, but not more than 0,913 g/cm³

for use in the co-extrusion processing of films for flexible food packaging (2)

0 %

31.12.2025

0.6920

ex 3901 90 80

53

Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with:

an acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), and

a melt flow rate of 10g/10 min or more (125°C/2,16 kg, ASTM D1238)

0 %

31.12.2025

0.6734

ex 3901 90 80

55

Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:

an acrylic acid content of 6 % or more but not more than 50 % by weight, and

a melt flow rate of 1g/10 min or more at 190 °C/2.16 kg (measured using ASTM D1238)

0 %

-

31.12.2025

0.5049

ex 3901 90 80

67

Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more

0 %

-

31.12.2025

0.6736

ex 3903 90 90

65

Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)  

0 %

-

31.12.2025

0.6804

ex 3903 90 90

70

Copolymer in the form of granules containing by weight:

75 % (± 7 %) styrene and

25 % (± 7 %) methylmethacrylate

0 %

31.12.2025

0.4981

ex 3904 69 80

81

Poly(vinylidene fluoride) (CAS RN 24937-79-9)

0 %

-

31.12.2025

0.6672

ex 3906 90 90

33

Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 µm or more but not more than 10 µm

0 %

-

31.12.2025

0.6663

ex 3906 90 90

37

Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 µm

0 %

-

31.12.2025

0.6891

ex 3907 10 00

20

Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine

0 %

-

31.12.2022

0.6839

ex 3907 30 00

15

Epoxide resin, halogen-free,

containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin,

not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and

containing solvents

for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits (2)

0 %

-

31.12.2025

0.6840

ex 3907 30 00

25

Epoxide resin

containing by weight 21 % or more of brome,

not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and

containing solvents

0 %

-

31.12.2025

0.4940

ex 3907 99 80

ex 3913 90 00

30

20

Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)

0 %

-

31.12.2025

0.5057

ex 3907 99 80

80

Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles

0 %

-

31.12.2025

0.5032

ex 3909 40 00

20

Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices (2)

0 %

-

31.12.2025

0.6921

ex 3910 00 00

15

Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated

0 %

-

31.12.2021

0.7217

ex 3910 00 00

45

Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa·s (CAS RN 70131-67-8)

0 %

-

31.12.2021

0.5109

ex 3911 90 99

35

Alternated copolymer of ethylene and maleic anhydride (EMA)

0 %

-

31.12.2025

0.4953

ex 3912 11 00

40

Cellulose diacetate powder

0 %

-

31.12.2025

0.6718

ex 3912 39 85

50

Polyquaternium 10 (CAS RN 68610-92-4)

0 %

-

31.12.2025

0.4757

ex 3919 10 80

37

Polytetrafluoroethylene film:

with a thickness of 100 µm or more,

an elongation at break of not more than 100 %,

coated on one side with a pressure sensitive silicon adhesive

0 %

-

31.12.2025

0.4761

ex 3919 10 80

ex 3919 90 80

43

26

Ethylene vinyl acetate film:

of a thickness of 100 µm or more,

coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner

0 %

-

31.12.2022

0.6886

ex 3919 10 80

63

Reflecting film consisting of

a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,

a layer of an acrylic resin having embedded glass beads,

a layer of an acrylic resin hardened by a melamine cross-linking agent,

a metal layer,

an acrylic adhesive, and

a release film

0 %

-

31.12.2025

0.4947

ex 3919 90 80

65

Self-adhesive film with a thickness of 40 µm or more, but not more than 475 µm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner

0 %

-

31.12.2025

0.4925

ex 3919 90 80

70

Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad

0 %

-

31.12.2025

0.4964

ex 3919 90 80

82

Reflecting film consisting of:

a polyurethane layer,

a glass microspheres layer,

a metallised aluminium layer, and

an adhesive, covered on one or both sides with a release liner,

whether or not a poly(vinyl chloride) layer,

a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use

0 %

-

31.12.2025

0.6640

ex 3920 10 40

40

Tubular layered film predominately of polyethylene:

consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on   either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,

having a total thickness of 55 µm or more,

having a diameter of 500 mm or more but not more than 600 mm

0 %

-

31.12.2025

0.3357

ex 3920 62 19

48

Sheets or rolls of poly(ethylene terephthalate):

coated on both sides with a layer of epoxy acrylic resin,

of a total thickness of 37 μm (± 3 μm)

0 %

-

31.12.2025

0.2589

ex 3920 62 19

52

Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D257 method)

0 %

-

31.12.2023

0.6911

ex 3921 19 00

40

Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:

a width of 98 mm or more but not more than170 mm,

a thickness of 15 µm or more but not more than 36 µm,

of a kind used for the manufacture of alkaline battery separators

3.2 %

-

31.12.2021

0.7263

ex 3921 19 00

45

Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:

zero transversal production direction (TD) shrinkage,

a total thickness of 8 μm or more, but not more than 50 μm,

a width of 15 mm or more, but not more than 900 mm,

a length of more than 200 m, but not more than 8 000 m,

an average pore size between 0,02 μm and 0,1 μm

laminated or not with a Polypropylene non-woven mat of 50 to 200 µm thickness

coated or not with surfactant

coated or not on 1 or 2 sides with a ceramic layer of min 1 µm thickness or more, but not more than 5 µm

coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 µm thickness or more, but not more than 5 µm

3.2 %

-

31.12.2021

0.6742

ex 3921 90 55

40

Three layered fabric sheet, in rolls,

comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,

coated on both sides with polyamide ,

of a total thickness not more than 135 μm,

of a total weight not more than 80 g/m2

0 %

31.12.2025

0.7335

ex 3926 30 00

ex 3926 90 97

50

48

Coated interior or exterior decorative parts consisting of:

a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and

a PVC foil,

not containing layers of copper, nickel or chromium,

for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705  (2)

0 %

p/st

31.12.2022

0.6717

ex 3926 90 97

23

Plastic cover with clips for the exterior rear-view mirror of motor vehicles

0 %

p/st

31.12.2025

0.3850

ex 3926 90 97

43

Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 µm or more but not more than 4,95 μm

0 %

-

31.12.2023

0.6708

ex 4009 42 00

20

Rubber brake hose with:

textile strings,

a wall thickness of 3,2 mm,

a metal hollow terminal pressed on both ends, and

one or more mounting brackets,

for use in the manufacture of goods of Chapter 87 (2)

0 %

-

31.12.2025

0.6844

ex 4016 93 00

30

Rectangular ethylene-propylene-diene rubber gasket, with:

a length of 72 mm or more but not more than 825 mm,

a width of 18 mm or more but not more than 155 mm,

a peak temperature of 150°C or more but not more than 240°C,

a permissible material outflow at the place of the mold split of not more than 0,3 mm

0 %

-

31.12.2025

0.6884

ex 5403 39 00

10

Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry (2)

0 %

-

31.12.2022

0.5059

ex 5603 13 10

20

Non-woven of spunbonded polyethylene, with a coating,

of a weight of more than 80 g/m² but not more than 105 g/m² and

an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)

0 %

31.12.2025

0.5987

ex 5603 14 90

60

Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:

of weight of 160 g/m² or more but not more than 300 g/m²,

not laminated

with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M

pleatable

0 %

31.12.2023

0.4978

ex 6909 19 00

20

Silicon nitride (Si3N4) rollers or balls

0 %

-

31.12.2025

0.7619

ex 7006 00 90

40

Plates of sodalime or borosilicate glass of STN (Super Twisted Nematic) or TN (Twisted Nematic) quality having:

a length of 300 mm or more but not more than 1 500 mm,

a width of 300 mm or more but not more than 1 500 mm,

a thickness of 0,5 mm or more but not more than 1,1 mm,

an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,

with or without a passivation layer of silicon dioxide (SiO2) between indium-tin-oxide layer and glass surface,

with or without a multi layer anti-reflection-coating on the other side, and

machined (chamfered) edges

0 %

-

31.12.2023

0.6870

ex 7009 10 00

40

Electrochromic self-dimming inside rear-view mirror, consisting of:

a mirror support

a plastic casing and

an integrated circuit

for use in the manufacture of motor vehicles of Chapter 87 (2)

0 %

-

31.12.2025

0.5021

ex 7019 19 10

20

Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate

0 %

-

31.12.2025

0.5020

ex 7019 19 10

25

Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 µm or more but not more than 5,83 µm predominate

0 %

-

31.12.2025

0.4853

ex 7202 99 80

10

Ferro-dysprosium, containing by weight:

78 % or more of dysprosium, and

18 % or more but not more than 22 % of iron

0 %

-

31.12.2025

0.7502

ex 7318 24 00

40

Tube or pipe restraint joint elements:

of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7,

produced by metal injection moulding,

with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/– 1),

measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm

0 %

-

31.12.2023

0.6680

ex 7326 90 98

40

Iron and steel weights

whether or not with parts of other material

whether or not with parts of other metals

whether or not surface treated

whether or not printed

of a kind used for the production of remote controls

0 %

-

31.12.2025

0.5029

ex 7604 29 10

ex 7606 12 99

ex 7606 12 99

10

21

25

Sheets and bars of aluminium-lithium alloys

0 %

-

31.12.2022

0.5487

ex 7607 11 90

ex 7607 11 90

ex 7607 11 90

ex 7607 11 90

ex 7607 11 90

ex 7607 11 90

48

49

51

52

53

56

Aluminium foil in rolls:

having a purity of 99,99 % by weight,

of a thickness of 0,021 mm or more but not more than 0,2 mm,

with a width of 500 mm,

with a surface oxide layer by 3 to 4 nm thick,

and with a cubic texture of more than 95 %

0 %

-

31.12.2021

0.4050

ex 7607 11 90

60

Plain aluminium foil with the following parameters:

an aluminium content of 99,98 % or more,

a thickness of 0,070 mm or more but not more than 0,125 mm,

with a cubic texture,

of a kind used for high voltage etching

3.7 %

-

31.12.2021

0.7698

ex 7607 20 90

10

Aluminium foil, in rolls:

coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them,

with a width of 200 mm or more, but not more than 400 mm,

with a thickness of 0,138 mm or more, but not more than 0,168 mm,

for use in the manufacture of lithium-ion battery cell covers (2)

3.7 %

-

31.12.2021

0.6730

ex 8101 96 00

10

Tungsten wire containing by weight 99 % or more of tungsten with:

a maximum cross-sectional dimension of not more than 50 µm

a resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre

0 %

-

31.12.2025

0.5097

ex 8104 30 00

35

Magnesium powder

of purity by weight of more than 99,5 %

with a particle size of 0,2 mm or more but not more than 0,8 mm

0 %

-

31.12.2025

0.4904

ex 8108 90 30

45

Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 4967

0 %

-

31.12.2025

0.6805

ex 8113 00 90

20

Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules

0 %

-

31.12.2025

0.5024

ex 8301 60 00

ex 8419 90 85

ex 8479 90 70

ex 8481 90 00

ex 8503 00 99

ex 8515 90 80

ex 8537 10 98

ex 8538 90 99

ex 8708 99 10

ex 8708 99 97

30

40

30

50

43

40

55

70

55

22

Silicone or plastic keyboards, comprising:

parts of common metal, and

whether or not comprising parts of plastic,

epoxy resin reinforced with fiberglass or wood,

whether or not printed or surface-treated,

with or without electrical conductors

with or without a membrane bonded to the keyboard,

with or without mono or multilayer protective film

0 %

p/st

31.12.2025

0.4996

ex 8407 90 90

20

Compact Liquid Petroleum Gas (LPG) Engine System, with:

6 cylinders,

an output of 75 kW or more, but not more than 80 kW,

inlet and exhaust valves modified to operate continuously in heavy duty applications,

for use in the manufacture of vehicles of heading 8427 (2)

0 %

-

31.12.2025

0.6160

ex 8414 30 81

ex 8414 80 73

60

30

Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:

driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors,

with a nominal power rating of not more than 1,5 kW,

a rated voltage of 100 V or more but not more than 240 V,

with a height of not more than 300 mm,

an external diameter of not more than 150 mm,

with a unit weight of not more than 15 kg,

for use in the manufacture of heat pumps for household appliances, including clothes dryers (2)

0 %

-

31.12.2023

0.7317

ex 8414 80 22

20

Air membrane compressor with:

a flow of 4,5 l/min or more, but not more than 7 l/min,

power input of not more than 8,1 W, and

a gauge pressure capacity not exceeding 400 hPa (0,4 bar)

of a kind used in the production of motor vehicle seats

0 %

-

31.12.2022

0.6842

ex 8415 90 00

60

Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:

extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,

a weight of 0,02 kg or more but not more than 0,25 kg

0 %

p/st

31.12.2025

0.6860

ex 8415 90 00

65

Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with:

a length of 143 mm or more but not more than 292 mm,

a diameter of 31 mm or more but not more than 99 mm,  

with a weight of not less than 0,12 kg and not more than 0,9 kg, 

a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and 

a solid particle diameter of not more than 0,06 mm,

for use in the manufacture of car air-conditioning systems (2)

0 %

p/st

31.12.2022

0.6821

ex 8436 99 00

10

Part containing:

a single-phase AC motor,

an epicyclic gearing,

a cutter blade

and whether or not containing:

a capacitor,

a part fitted with a threaded bolt

for use in the manufacture of garden shredders (2)

0 %

p/st

31.12.2025

0.7380

ex 8481 80 59

30

Two-way flow control valve with housing, with:

at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,

at least 330 cm3/minute, but not more than 5 000 cm3/minute flow rate,

at least 19, but not more than 300 MPa operating pressure

0 %

-

31.12.2022

0.7518

ex 8481 90 00

40

Valve armature:

for the opening and closing of the flow of fuel,

consisting of a shaft and a blade,

with at least 3 but not more than 8 holes on the blade,

made of metal and/or metal alloy(s)

0 %

-

31.12.2023

0.4997

ex 8483 40 90

80

Transmission gearbox, with:

not more than 3 gears,

an automatic deceleration system and

a power reversal system,

for use in the manufacture of goods of heading 8427 (2)

0 %

p/st

31.12.2025

0.6854

ex 8501 10 10

20

Synchronous motor for a dishwasher with a water flow control mechanism with

a length without axle of 24 mm (+/- 0,3),

a diameter of 49,3 mm (+/- 0,3)

a rated voltage of 220 V AC or more but not more than 240 V AC,

a rated frequency of 50 Hz or more but not more than 60 Hz,

an input power of not more than 4 W,

a rotation speed of 4rpm or more but not more than 4,8rpm,

an output torque of not less than 10kgf/cm

0 %

-

31.12.2022

0.6858

ex 8501 10 99

64

DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:

with Ingress Protection (IP) standard of IP69,

with a rotor speed of not more than 6 500 rpm when not loaded,

with a rated voltage of 12,0 V (+/- 0,1),

of a specified temperature range of  – 40 °C or more, but not more than + 165 °C,

with or without a connecting pinion,

with or without an engine connector,

with or without a flange,

with a diameter of not more than 40 mm (not including the flange),

with an overall height of not more than 90 mm (from the base to the pinion)

0 %

-

30.06.2021

0.6880

ex 8501 10 99

65

Electric turbocharger actuator, with:

a DC motor,

an integrated gear mechanism,

a (pulling)force of 200 N or more at a minimum of 140°C elevated ambient temperature,

a (pulling) force of 250 N or more in each position of its stroke,

an effective stroke of 15 mm or more but not more than 25 mm,

with or without an on-board diagnostics interface

0 %

-

31.12.2025

0.6627

ex 8501 10 99

75

Permanently excited DC motor with

a multiple-phase winding

an external diameter of 28 mm or more but not more than 35 mm,

a rated speed of not more than 12 000 rpm,

a power supply voltage of 8 V or more but not more than 27 V

0 %

-

31.12.2025

0.4731

ex 8501 31 00

37

Permanently excited DC motor with

a multiple-phase winding,

an external diameter of 30 mm or more but not more than 90 mm, including mounting flange,

a rated speed of not more than 15 000 rpm,

an output of 45 W or more but not more than 400 W and

a supply voltage of 9 V or more but not more than 50 V,

whether or not with a drive disc,

whether or not with a crankcase,

whether or not with a fan,

whether or not with a cap assembly,

whether or not with a sun gear,

whether or not with a speed and rotational direction encoder,

whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,

whether or not with a mounting flange

0 %

-

31.12.2024

0.5577

ex 8501 31 00

50

DC motors, brushless, with:

an external diameter of 80 mm or more, but not more than 200 mm,

a supply voltage of 9 V or more, but not more than 16 V,

an output at 20 °C of 300 W or more, but not more than 750 W,

a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,

a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm,

with or without a pulley,

with or without an electronic power steering sensor/controller

0 %

-

31.12.2022

0.6809

ex 8501 31 00

ex 8501 32 00

53

45

Automotive-ready, brushless and permanently excited direct current motor with:

a specified speed of not more than 4 100 rpm,

a minimum output of 400 W, but not more than 1,3 kW (at 12V),

a flange diameter of 85 mm or more, but not more than 200 mm,

a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,

a housing length of not more than 265 mm, measured from the flange to the outer ending,

a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),

a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and

surface magnets,

whether or not with electronic power steering controller

0 %

-

31.12.2025

0.6161

ex 8503 00 99

55

Stator for brushless motor, with:

an internal diameter of 206,6 mm (± 0,5),

an external diameter of 265,0 mm (± 0,2), and

a width of 37,2 mm or more but not more than 47,8 mm,

of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums

0 %

p/st

31.12.2025

0.7764

ex 8504 31 80

55

Electrical transformer with:

a capacity of 0,22 kVA or more, but not more than 0,24 kVA,

an operating temperature range of + 10°C or more, but not more than + 125°C,

four or five inductively coupled copper wire windings,

11 or 12 connection pins at the bottom, and

dimensions of not more than 32 mm x 37,8 mm x 25,8 mm

0 %

-

31.12.2024

0.7788

ex 8505 11 00

68

Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with:

a length of 13,8 mm or more but not more than 45,2 mm,

a width of 7,8 mm or more but not more than 25,2 mm,

a height of 1,3 mm or more but not more than 4,7 mm

0 %

-

31.12.2024

0.6857

ex 8505 11 00

ex 8505 19 90

73

35

Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with:

a length of 5 mm or more, but not more than 60 mm,

a width of 5 mm or more, but not more than 40 mm,

a thickness of 3 mm or more, but not more than 15 mm

0 %

p/st

31.12.2022

0.7641

ex 8507 60 00

13

Prismatic lithium-ion electric accumulators with:

a width of 173,0 mm (± 0,3 mm),

a thickness of 45,0 mm (± 0,3 mm),

a height 125,0 mm (± 0,3 mm),

a nominal voltage of 3,67 V (± 0,01 V), and

a nominal capacity of 94 Ah and/or 120 Ah,

for use in the manufacture of rechargeable electric vehicle batteries (2)

1.3 %

-

31.12.2021

0.6685

ex 8507 60 00

15

Cylindrical lithium-ion-accumulators or modules with:

a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,

a nominal voltage of 36 V or more, but not more than 48 V,

a power of 300 Wh or more, but not more than 648 Wh,

for use in the manufacture of electric bicycles (2)

1.3 %

-

31.12.2021

0.6625

ex 8507 60 00

17

Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with:

a rated voltage of 12 V,

a length of 350 mm or more but not more than 355 mm,

a width of 170 mm or more but not more than 180 mm,

a height of 180 mm or more but not more than 195 mm,

weighing 10 kg or more but not more than 15 kg

a nominal charge of 60 Ah or more, but not more than 80 Ah

1.3 %

-

31.12.2021

0.7663

ex 8507 60 00

18

Lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:

a length of not more than 1600 mm,

a width of not more than 448 mm,

a height of not more than 395 mm,

a nominal voltage of 280 V or more but not more than 400 V,

a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,

a charging voltage of 110 V or more but not more than 230 V, and

containing 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,

for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703 (2)

1.3 %

-

31.12.2021

0.7717

ex 8507 60 00

22

Integrated battery system in a metal case with holders, consisting of:

a lithium-ion battery with voltage of 48 V (± 5 V) and capacity of 0,44 kWh (± 0,05 kWh),

Battery Management System,

a relay,

a low voltage converter (DC/DC),

at least one connector

for use in the manufacture of hybrid motor vehicles (2)

1.3 %

-

31.12.2021

0.2907

ex 8507 60 00

30

Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries (2)

1.3 %

-

31.12.2021

0.6703

ex 8507 60 00

33

Lithium-ion accumulator, with:

a length of 150 mm or more, but not more than 1,000 mm,

a width of 100 mm or more, but not more than 1,000 mm,

a height of 200 mm or more, but not more than 1,500 mm,

a weight of 75 kg or more, but not more than 200 kg,

a nominal capacity not less than 150Ah and not more than 500 Ah,

a nominal output voltage of 230V AC (Line to neutral) or a nominal voltage of 64V (±10 %)

1.3 %

-

31.12.2021

0.6702

ex 8507 60 00

37

Lithium-ion accumulator, with:

a length of 1 200 mm or more, but not more than 2 000 mm,

a width of 800 mm or more, but not more than 1 300 mm,

a height of 2 000 mm or more, but not more than 2 800 mm,

a weight of 1 800 kg or more, but not more than 3 000 kg,

a nominal capacity of 2 800 Ah or more but not more than 7 200 Ah

1.3 %

-

31.12.2021

0.5548

ex 8507 60 00

50

Modules for the assembly of batteries of ion lithium electric accumulators with:

a length of 298 mm or more, but not more than 500 mm,

a width of 33,5 mm or more, but not more than 209 mm,

a height of 75 mm or more, but not more than 228 mm,

a weight of 3,6 kg or more, but not more than 17 kg, and

a nominal energy of 458 Wh or more, but not more than 2 158 Wh

1.3 %

-

31.12.2021

0.5342

ex 8507 60 00

65

Cylindrical lithium ion cell with

3,5 VDC to 3,8 VDC,

300 mAh to 900 mAh, and

a diameter of 10,0 mm to 14,5 mm

1.3 %

-

31.12.2021

0.7888

ex 8507 60 00

68

Lithium-ion accumulator in a metal housing, with

a length of 65 mm or more, but not more than 225 mm,

a width of 10 mm or more, but not more than 75 mm,

a height of 60 mm or more, but not more than 285 mm,

a nominal voltage of 2,1 V or more, but not more than 3,8 V, and

a nominal capacity of 2,5 Ah or more, but not more than 325 Ah

1.3 %

-

31.12.2021

0.5356

ex 8507 60 00

75

Rectangular lithium-ion-accumulator, with

a metal casing,

a length of 173 mm (± 0,15 mm),

a width of 21 mm (± 0,1 mm),

a height of 91 mm (± 0,15 mm),

a nominal voltage of 3,3 V and,

a nominal capacity of 21 Ah or more

1.3 %

-

31.12.2021

0.6753

ex 8507 60 00

77

Lithium-ion rechargeable batteries, with:

a length of 700 mm or more, but not more than 2 820 mm,

a width of 935 mm or more, but not more than 1 660 mm,

a height of 85 mm or more, but not more than 700 mm,

a weight of 250 kg or more, but not more than 700 kg,

a power of not more than 175 kWh,

a nominal voltage of 400 V

1.3 %

-

31.12.2021

0.5014

ex 8508 70 00

ex 8537 10 98

20

98

Electronic circuit cards that:

are connected by wire or radio frequency to each other and the motor controller card, and

regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,

whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)

0 %

p/st

31.12.2025

0.6856

ex 8512 20 00

30

Lighting module, containing at least:

two LEDs,

glass or plastic lenses, focusing/scattering the light emitted by the LEDs,

reflectors redirecting the light emitted by the LEDs,

in an aluminium housing with a radiator, mounted at a bracket with an actuator

0 %

p/st

31.12.2025

0.6863

ex 8512 30 90

20

Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:

a printed circuit board,

a connector,

whether or not a metal holder,

for use in the manufacture of goods of chapter 87 (2)

0 %

p/st

31.12.2022

0.6689

ex 8529 90 65

28

Electronic assembly comprising at least:

a printed circuit board with,

one or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing,

flash memory,

operating memory,

with or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces,

sockets and plugs for connecting a LCD-display, a LED lighting and a control panel

0 %

p/st

31.12.2025

0.4893

ex 8529 90 65

ex 8529 90 92

65

53

Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module

0 %

p/st

31.12.2025

0.4890

ex 8529 90 92

25

LCD modules, not combined with touch screen facilities, solely consisting of:

one or more TFT glass or plastic cells,

a die cast heat sink,

a backlight unit,

one printed circuit board with micro controller, and

LVDS (Low Voltage Differential Signalling) interface,

for use in the manufacture of radios for motor vehicles (2)

0 %

p/st

31.12.2025

0.6654

ex 8529 90 92

37

Fastening and covering ledges of aluminium alloy containing:

silicon and magnesium,

with a length of 300 mm or more but not more than 2 200 mm,

specifically shaped for use in the manufacture of TV sets (2)

0 %

-

31.12.2025

0.6629

ex 8529 90 92

63

LCD module

with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,

with or without a touch screen,

with an LED backlight,

with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,

with a plug for power supply and CAN and LVDS interfaces,

with or without electronic components for dynamic adjustments of colour,

in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,

suitable for installation in motor vehicles of Chapter 87 (2)

0 %

p/st

31.12.2025

0.5018

ex 8529 90 92

67

Colour LCD display panel for LCD monitors of heading 8528:

with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

with or without a touch screen,

with backlight, micro-controller,

with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,

in a housing with or without a heat sink at the back of the housing,

without a signal-processing module,

whether or not with haptic and acoustical feedback,

for use in the manufacture of vehicles of Chapter 87 (2)

0 %

p/st

31.12.2025

0.6781

ex 8529 90 92

85

Colour LCD module in a housing:

with a diagonal screen measurement of 14.48 cm or more but not more than 26 cm,

without touch screen,

with a backlight and micro-controller,

with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,

without a signal processing module,

with control electronics for pixel addressing only,

with a motorised mechanism for moving the display screen,

for permanent installation in vehicles of Chapter 87 (2)

0 %

p/st

31.12.2025

0.6849

ex 8536 69 90

60

Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors (2)

0 %

p/st

31.12.2022

0.5028

ex 8536 69 90

84

Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528 (2)

0 %

p/st

31.12.2025

0.6864

ex 8537 10 91

50

Fuse control module in a plastic housing with mounting brackets comprising:

sockets with or without fuses,

connecting ports,

a printed circuit board with embedded microprocessor, micro switch and relay

of a kind used in the manufacture of goods of chapter 87

0 %

p/st

31.12.2025

0.6889

ex 8537 10 98

35

Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:

2 rotary knobs

27 or more pushbuttons

LED lights

2 integrated circuits for receiving and sending of control signals via the LIN-bus

0 %

p/st

31.12.2025

0.6866

ex 8538 90 91

ex 8538 90 99

20

50

Interior antenna for a car door locking system, comprising:

an antenna module in a plastic housing,

a connection cable with a plug,

at least two mounting brackets,

whether or not PCB including integrated circuits, diodes and transistors,

for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2025

0.6710

ex 8544 30 00

ex 8544 42 90

60

50

Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87 (2)

0 %

-

31.12.2025

0.6867

ex 8544 30 00

85

Extension two-core cable with two connectors, containing at least:

a rubber grommet,

a metal attachment bracket,

of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87

0 %

p/st

31.12.2025

0.6853

ex 8544 42 90

70

Electric conductors:

of a voltage of not more than 80 V,

with a length of not more than 120 cm,

fitted with connectors,

for use in the manufacture of hearing aids, accessory kits and speech processors (2)

0 %

p/st

31.12.2025

0.6861

ex 8544 49 93

30

Electric conductors:

of a voltage of not more than 80 V,

of a platinum-iridium-alloy,

coated with poly(tetrafluoroethylene),

without connectors,

for use in the manufacture of hearing aids, implants and speech processors (2)

0 %

m

31.12.2025

0.5002

ex 8545 90 90

40

Corrosion resistant, layered technical fibre substrate of a gas diffuser layer with:

controlled fibre length, flex strength, porosity, thermal conductance, electrical resistance,

a thickness of less than 600 µm,

a weight of less than 500 g/m2

0 %

31.12.2021

0.6707

ex 8708 30 10

ex 8708 30 91

70

40

Ductile cast iron brake caliper jaw, of a  kind used in the manufacture of goods of Chapter 87

0 %

p/st

31.12.2025

0.6869

ex 8708 40 20

ex 8708 40 50

20

10

Automatic hydrodynamic gearbox

with a hydraulic torque converter,

without transfer box and cardan shaft,

whether or not with front differential,

for use in the manufacture of motor vehicles of Chapter 87 (2)

0 %

p/st

31.12.2025

0.6648

ex 8708 50 20

ex 8708 50 99

20

10

Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle

of a length of  1 m or more but not more than 2 m,

of a weight of 6 kg or more but not more than 9 kg

0 %

p/st

31.12.2025

0.6711

ex 8708 80 20

ex 8708 80 35

10

10

Upper strut insulator containing:

a metal holder with three mounting screws, and 

a rubber bump,

for use in the manufacture of goods of Chapter 87 (2)

0 %

p/st

31.12.2025

0.6859

ex 8708 91 20

ex 8708 91 99

30

30

Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100 with:

an insulating area flatness of not more than 0,1 mm,

a permissible particle quantity of 0,3 mg per tank,

a distance between pores of 2 mm or more,

pore sizes of not more than 0,4 mm, and

not more than 3 pores larger than 0,2mm

of a kind used in heat exchangers for car cooling systems

0 %

p/st

31.12.2025

0.7716

ex 8708 91 35

20

Turbocharger cooling duct containing:

an aluminum alloy duct with at least one metal holder and at least two mounting holes,

a rubber pipe with clips,

a stainless steel flange highly resistant to corrosion [SUS430JIL],

for use in the manufacture of compression ignition engines of motor vehicles (2)

0 %

-

31.12.2024

0.6687

ex 8708 95 10

ex 8708 95 99

10

20

Inflatable safety cushion of high strength polyamide fibre:

sewn,

folded into three-dimensional packing form, fixed by thermal forming, or flat (unfolded) safety cushion with or without thermal forming

0 %

p/st

31.12.2025

0.6688

ex 8708 95 10

ex 8708 95 99

20

30

Inflatable safety cushion  of high strength polyamide fibre:

sewn,

folded,

with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing

suitable for cool inflator technology

0 %

p/st

31.12.2025

0.7581

ex 8708 50 20

ex 8708 50 99

60

15

Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:

at least an actuator,

whether or not an interior distribution by chain

0 %

-

31.12.2024

0.6686

ex 8714 10 90

10

Motorcycle fork rod inner tubes:

of SAE1541 carbon steel,

with a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm),

having a wall thickness of 1,3 mm or more, but not more than 1,6 mm,

having an elongation at break of 15 %,

perforated

0 %

p/st

31.12.2025

0.6848

ex 8714 10 90

70

Motor bikes radiators in consignment of 100 pieces or more

0 %

p/st

31.12.2022

0.6879

ex 8714 96 10

10

Pedals, for use in the manufacture of bicycles (including electric bicycles) (2)

0 %

-

31.12.2025

0.6878

ex 8714 99 90

30

Seat posts, for use in the manufacture of bicycles (including electric bicycles) (2)

0 %

p/st

31.12.2025

0.4883

ex 9001 90 00

85

Light guide panel made of poly(methyl methacrylate):

whether or not cut,

whether or not printed,

for use in the manufacture of backlight units for flat screen TVs (2)

0 %

-

31.12.2025

0.7590

ex 9002 11 00

18

Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:

a horizontal field of view range to a maximum of 120 deg,

a diagonal field of view range to a maximum of 92 deg,

a focal length to a maximum of 7,50 mm,

a relative aperture of a maximum of F/2,90,

a maximum diameter of 22 mm

0 %

-

31.12.2023

0.5692

ex 9002 11 00

20

Lenses:

measuring not more than 95 mm × 55 mm × 50 mm,

with a resolution of 160 lines/mm or better, and

with a zoom ratio of 3 or more times

0 %

-

31.12.2022

0.5025

ex 9401 90 80

10

Ratchet disk for use in the manufacture of reclining car seats (2)

0 %

p/st

31.12.2025

0.4846

ex 9503 00 75

ex 9503 00 95

10

10

Plastic cable car scale models, whether or not with a motor, for printing (2)

0 %

p/st

31.12.2025

0.6950

ex 9607 20 10

10

Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers (2)

0 %

-

31.12.2022

0.6949

ex 9607 20 90

10

Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers (2)

0 %

-

31.12.2025’

(1)

However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.

(2)

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1)

(3)

Only the ad valorem duty is suspended. The specific duty shall continue to apply. ’

(3)the following rows are added or inserted according to the numerical order of the CN and TARIC codes in the second and third columns:

Serial Number

CN code

TARIC

Description

Rate of autonomous duty

Supplementary Unit

Date foreseen for mandatory review

‘0.8021

2804 70 10

Red phosphorus

0 %

-

31.12.2022

0.8022

2804 70 90

Phosphorus, other than red phosphorus

0 %

-

31.12.2023

0.7974

ex 2903 39 19

40

3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.8017

ex 2903 99 80

25

2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8018

ex 2903 99 80

35

2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7957

ex 2904 99 00

55

2,4-dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more

0 %

-

31.12.2025

0.7963

ex 2906 29 00

70

1,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8015

ex 2914 29 00

35

4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7955

ex 2915 24 00

10

Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7980

ex 2916 19 95

60

Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2)

0 %

-

31.12.2025

0.7940

ex 2916 19 95

70

Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more

0 %

-

31.12.2025

0.7931

ex 2916 20 00

25

Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.7933

ex 2916 20 00

35

2-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7929

ex 2916 39 90

16

3-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.8008

ex 2918 29 00

40

3-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 %

0 %

-

31.12.2025

0.7934

ex 2918 99 90

43

Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more

0 %

-

31.12.2025

0.7947

ex 2921 29 00

70

N,N,N',N'-tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.8019

ex 2921 49 00

45

2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.8020

ex 2921 49 00

55

2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7946

ex 2922 19 00

29

N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.7935

ex 2922 19 00

70

2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8000

ex 2924 19 00

18

2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.8013

ex 2925 19 95

40

N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more

0 %

-

31.12.2025

0.7985

ex 2930 90 98

88

1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more

0 %

-

31.12.2025

0.7951

ex 2931 90 00

25

N-(3-(dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7958

ex 2932 20 90

18

4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7984

ex 2932 20 90

23

1,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more

0 %

-

31.12.2025

0.7978

ex 2932 99 00

68

3,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7930

ex 2932 99 00

73

5-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7936

ex 2932 99 00

78

Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7954

ex 2932 99 00

83

6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7938

ex 2933 19 90

43

tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7937

ex 2933 29 90

23

1,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7976

ex 2933 39 99

83

2-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7925

ex 2933 39 99

84

Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7981

ex 2933 39 99

86

3-(N-hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7939

ex 2933 39 99

87

6-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7986

ex 2933 39 99

88

Benzyl 4-amino-3-chloro-6-(4-chloro-2-fluoro-3-methoxyphenyl)-5-fluoropyridine-2-carboxylate (CAS RN 1390661-72-9) with a purity by weight of 92 % or more

0 %

-

31.12.2025

0.7952

ex 2933 69 80

33

2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.7927

ex 2933 99 80

60

2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more

0 %

-

31.12.2025

0.7971

ex 2933 99 80

70

5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.8014

ex 2933 99 80

80

Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more

0 %

-

31.12.2025

0.7926

ex 2934 99 90

65

Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more

0 %

-

31.12.2025

0.7944

ex 2934 99 90

70

1,3,4-thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more

0 %

-

31.12.2025

0.7928

ex 2935 90 90

44

4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more

0 %

-

31.12.2025

0.7943

ex 3201 90 20

10

Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less

0 %

-

31.12.2025

0.7975

ex 3801 10 00

10

Artificial graphite in powder form, (CAS RN 7782-42-5) with:

a secondary particle structure which is aggregated from smaller primary particles.

without coating on the surface,

particle size represented by d50 value of 13,5 µm (± 0,5),

specific surface area (measured by BET) less than 2,0 m2/g,

tap density: 1,10 ~ 1,70 g/cm3 ,

specific Discharge Capacity of 351,0 mAh/g (±3,0),

initial efficiency of 94,0 % (± 1,0)

1.8 %

-

31.12.2021

0.7994

ex 3801 10 00

20

Artificial graphite (CAS RN 7782-42-5) powder form, with:

specific surface area (measured by BET) of 0,8 m2/g (± 0,25),

tap density: 0,85 g/cm3 (± 0,10),

particle size represented by d50 value of 21,0 µm (± 2,0),

specific discharge capacity of 351,0 mAh/g (±3,0),

initial efficiency of 94,0 % (± 2,0)

1.8 %

-

31.12.2021

0.7998

ex 3815 90 90

38

Photoinitiator, containing by weight:

80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1),

not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate

0 %

-

31.12.2025

0.7999

ex 3815 90 90

48

Photoinitiator containing by weight:

88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9),

not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7)

0 %

-

31.12.2025

0.7950

ex 3902 90 90

65

Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39

0 %

-

31.12.2025

0.7953

ex 3910 00 00

65

Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4)

0 %

-

31.12.2025

0.8009

ex 3911 90 99

38

Mixture containing by weight:

90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and

10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4)

0 %

-

31.12.2025

0.8010

ex 3911 90 99

48

Mixture containing by weight:

90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and

10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1)

0 %

-

31.12.2025

0.7949

ex 3920 61 00

40

Extruded thermoplastic foils or films of polycarbonate with:

matt surface texture on both sides,

a thickness of more than 50 μm but not more than 200 μm,

a width of 800 mm or more, but not more than 1 500 mm and

a length of 915 m or more, but not more 2 500 m, 

for use in the production of retroreflective products  (2)

0 %

-

31.12.2025

0.8011

ex 3920 62 19

ex 3920 62 90

68

20

Poly(ethylene terephthalate) film in rolls:

with a thickness of 50 μm or more but not more than 350 μm, and

covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm

0 %

-

31.12.2025

0.8005

ex 3920 99 28

48

Thermoplastic polyurethane foil in rolls, with:

a width of 900 mm or more but not more than 1016 mm,

a matt finish,

a thickness of 0,4 mm (± 8 %),

an elongation at break of 480 % or more (ASTM D412 (Die C)),

a tensil strength in machine direction of 470 (± 10) kg/cm²  (ASTM D412 (Die C)),

a Shore A hardness of 90 (± 3) (ASTM D2240),

a tear strength of 100 (± 10)  kg/cm²  (ASTM D624 (Die C)),

a melting point of 165°C (± 10 °C)

0 %

-

31.12.2025

0.8024

ex 5603 14 10

20

Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:

of weight of 160 g/m² or more but not more than 300 g/m²

laminated on one side with a membrane or a membrane and aluminium

with filtration efficiency according to DIN 60335-2-69:2008 minimum Filter class M

pleatable

0 %

31.12.2023

0.8028

ex 6909 19 00

40

Ceramic-carbon absorption cartridges with the following characteristics:

extruded fired ceramic bound multicellular cylindrical structure,

10 % or more by weight but not more than 35 % by weight of activated carbon,

65 % or more by weight but not more than 90 % by weight of ceramic binder,

with a diameter of 29 mm or more but not more than 41 mm,

a length of not more than 150 mm,

fired at temperature of 800 °C or more, and

for vapours adsorption,

of a kind used for assembly in fuel vapours absorbers in fuel systems of motor vehicles

0 %

p/st

31.12.2025

0.7913

ex 7506 20 00

20

Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with:

a thickness of 0,5 mm or more but not more than 3 mm,

a width of 250 mm or more but not more than 1 219 mm

0 %

-

31.12.2025

0.7997

ex 7616 99 90

35

Aluminum plate with:

a length of 36 mm or more but not more than 49 mm,

a width of 29,8 mm or more but not more than 45,2 mm,

a thickness of 0,18 mm or more but not more than 0,66 mm,

equipped with a polypropylene tape with:

a length of 6,5 mm or more but not more than 16,5 mm,

a width of 39 mm or more but not more than 56 mm,

characteristic allowing to create solid joint with Pouch external layer by melting process assuring leak and pressure proof sealing of Cell,

resistance to influence of electrolyte,

for use in the manufacture of lithium-ion battery cells for motor vehicle batteries (2)

3 %

-

31.12.2021

0.7966

ex 8104 19 00

10

Unwrought magnesium containing 93 % or more but not more than 99,7 % by weight of magnesium

0 %

-

31.12.2025

0.7942

ex 8108 90 30

35

Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm

0 %

-

31.12.2025

0.8012

ex 8406 82 00

10

Industrial steam turbine with:

an output of 5 MW or more but not more than 40 MW,

designed for a pressure of not more than 140 bar and a temperature of not more than 540 ° C,

equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar

0 %

-

31.12.2025

0.7961

ex 8409 91 00

ex 8481 90 00

55

60

Nozzle body for the regulation of angle and distribution of fuel injection:

of a cylindrical shape,

made of stainless steel,

with 4 or more, but not more than 16 holes,

with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute

0 %

-

31.12.2025

0.7965

ex 8409 91 00

75

Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:

an inlet diameter of 2 mm or more, but not more than 10 mm,

an outlet diameter of 2 mm or more, but not more than 10 mm,

an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection,

a plastic covering moulded around a stainless steel tube

0 %

-

31.12.2025

0.7967

ex 8409 91 00

ex 8481 90 00

80

70

Nozzle needle for opening and closing the flow of fuel in the engine, with:

2 holes,

4 grooves,

a diameter of 3 mm or more, but not more than 6 mm,

a length of 25 mm or more, but not more than 35 mm,

made of stainless steel with hard-chrome plating

0 %

-

31.12.2025

0.7969

ex 8413 30 20

40

High-pressure plunger pump for direct diesel injection, with:

an operating pressure of not more than 275 MPa,

a camshaft,

a fluid discharging of 15 cm3 per minute or more, but not more than 1 800 cm3 per minute,

an electric pressure regulating valve

0 %

-

31.12.2025

0.7970

ex 8413 30 20

50

High-pressure plunger pump for direct diesel injection:

with an operating pressure of not more than 275 MPa,

designed to contact the crankshaft,

with an electromagnetic valve

0 %

-

31.12.2025

0.7996

ex 8418 99 90

20

Aluminium connecting block for connecting to a condenser manifold in welding process:

hardened to T6 or T5 temper,

with a weight of not more than 150 g,

with a length of 20 mm or more but not more than 150 mm,

with a fixing rail in one piece

0 %

-

31.12.2025

0.8004

ex 8418 99 90

30

Receiver dryer profile for connecting to a condenser manifold in welding process with:

a braze flatness of not more than 0,2 mm,

a weight of 100 g or more but not more than 600 g,

a fixing rail in one piece

0 %

-

31.12.2025

0.7979

ex 8479 89 97

55

Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode

0.8 %

-

31.12.2021

0.7982

ex 8479 89 97

65

Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line

0.8 %

-

31.12.2021

0.7964

ex 8479 90 70

40

Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft:

of a circular shape,

made of steel alloy with sintering process,

with not more than 8 oil chambers,

with a Rockwell hardness of 55 or more,

with a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm3

0 %

-

31.12.2025

0.7968

ex 8481 30 91

ex 8481 30 99

30

50

Mechanical check (non-return) valve for opening and closing of the flow of fuel:

with an operating pressure of not more than 250 MPa,

with a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute,

with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,

made of steel

0 %

-

31.12.2025

0.7960

ex 8481 80 59

ex 8481 90 00

70

80

Flow-control valve

made of steel,

with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,

with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm

0 %

-

31.12.2025

0.7972

ex 8527 29 00

ex 8529 90 65

10

38

Satellite radio receiver module:

with a rectangular shape of dimensions 70,5 x 44,9 x 10,5 mm,

comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC,

being able to process radio frequency signals,

with a medium frequency unit,

for use in the manufacture of products falling under heading 8527 (2)

0 %

-

31.12.2025

0.7987

ex 8708 50 20

ex 8708 50 55

15

50

Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened

0 %

-

31.12.2025

0.7988

ex 8708 50 20

ex 8708 50 99

25

45

Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:

6 ball tracks or more but not more than 8, with

a thread,

an external involute spline with 21 or more but not more than 38 teeth,

for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,

forged, turned, milled and hardened

0 %

-

31.12.2025

0.7989

ex 8708 50 20

ex 8708 50 99

35

50

Inboard constant velocity joint tripod housing, with:

an outer diameter of 67,0 mm or more but not more than 99,0 mm,

3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,

an external spline with 21 teeth or more but not more than 41,

forged, turned, rolled and hardened

0 %

-

31.12.2025

0.7990

ex 8708 50 20

ex 8708 50 99

45

55

Outboard constant velocity joint inner race, part of the vehicle's drive system, with:

6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,

forged, turned, milled, broached and hardened

0 %

-

31.12.2025

0.7991

ex 8708 50 20

ex 8708 50 99

55

60

Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:

3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,

forged, turned, broached and hardened

0 %

-

31.12.2025

0.7973

ex 9002 11 00

23

Lenses with:

motorized focus, zoom, aperture,

electronically switchable infrared cut filter,

an adjustable focal length not less than 2,7 mm and not more than 55 mm,

a weight of not more than 100 g,

a length of less than 70 mm,

a diameter of not more than 60 mm

0 %

-

31.12.2025’

‘ (2)

Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1) ’

Top