(1)

In accordance with Article 16 of Directive 2014/53/EU of the European Parliament and of the Council (2), radio equipment which is in conformity with harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, is to be presumed to be in conformity with the essential requirements set out in Article 3 of that Directive covered by those standards or parts thereof.

(2)

By Implementing Decision C(2015) 5376 (3), the Commission made a request to the European Committee for Electrotechnical Standardisation (Cenelec) and the European Telecommunications Standards Institute (ETSI) for the drafting and revision of harmonised standards for radio equipment in support of Directive 2014/53/EU (‘the request’).

(3)

On the basis of the request, ETSI drafted the following new harmonised standards: EN 300 718-1 V2.2.1 for avalanche beacons, EN 303 345-3 V1.1.1 and EN 303 345-4 V1.1.1 for broadcast sound receivers, EN 303 348 V1.2.1 for audio frequency induction loop drivers, EN 303 364-2 V1.1.1 for primary surveillance radars, EN 303 372-1 V1.2.1, EN 303 372-2 V1.2.1, EN 303 413 V1.2.1, EN 303 980 V1.2.1 and EN 303 981 V1.2.1 for satellite stations and systems and EN 303 758 V1.1.1 for TETRA radio equipment.

(4)

On the basis of the request, ETSI revised the following harmonised standards: EN 301 444 V2.1.2, EN 301 908-15 V11.1.2, EN 302 296-2 V1.2.1, EN 302 480 V2.1.2 and EN 302 567 V1.2.1, the references of which have been published in the C series of the Official Journal of the European Union by Commission communication 2018/C 326/04 (4). This resulted in the adoption of the following revised harmonised standards: EN 301 444 V2.2.1 for satellite stations and systems, EN 301 908-15 V15.1.1 for IMT cellular networks, EN 302 296 V2.2.1 for digital terrestrial TV transmitters, EN 302 480 V2.2.1 for mobile communication on board aircraft systems and EN 302 567 V2.2.1 for multi Gbps radio equipment.

(5)

On the basis of the request, ETSI also revised the following harmonised standards for IMT cellular networks: EN 301 908-1 V13.1.1, EN 301 908-14 V13.1.1 and EN 301 908-18 V13.1.1, the references of which have been added in Annex I to Commission Implementing Decision (EU) 2020/167 (5). This resulted in the adoption of the following revised harmonised standards: EN 301 908-1 V15.1.1, EN 301 908-14 V15.1.1 and EN 301 908-18 V15.1.1. In addition, ETSI revised the harmonised standard EN 302 217-2 V3.2.2 for fixed radio systems, the reference of which has been added in Annex II to Implementing Decision (EU) 2020/167. This resulted in the adoption of the revised harmonised standard EN 302 217-2 V3.3.1.

(6)

The Commission, together with ETSI, has assessed whether those new and revised harmonised standards comply with the request.

(7)

Harmonised standards EN 301 908-14 V15.1.1, EN 301 908-15 V15.1.1, EN 301 908-18 V15.1.1, EN 302 217-2 V3.3.1, EN 302 480 V2.2.1, EN 302 567 V2.2.1, EN 303 345-3 V1.1.1, EN 303 345-4 V1.1.1, EN 303 348 V1.2.1, EN 303 372-2 V1.2.1, EN 303 413 V1.2.1 and EN 303 758 V1.1.1 satisfy the essential requirements which they aim to cover and which are set out in Article 3 of Directive 2014/53/EU. It is therefore appropriate to publish the references of those standards in the Official Journal of the European Union.

(8)

Harmonised standard EN 300 718-1 V2.2.1, in the last sentence of clause 5.1.3.1, does not specify all the conditions for verification mechanisms, allowing for a subjective interpretation of the specifications laid down therein. In addition, it does not lay down any requirements relating to the spurious response rejection, which is a receiver parameter that may be related to the production of harmful interferences. The reference of that harmonised standard should therefore be published in the Official Journal of the European Union with restriction.

(9)

Harmonised standard EN 301 444 V2.2.1, in second paragraph of clause 5.2.1, does not provide for any verification criteria for fulfilment of the specifications laid down therein, allowing uncertainty in terms of results. In addition, it provides, in clause 5.2.2.3.1, specifications as regards the installation of the equipment, which is not the objective of a harmonised standard. Finally, in the first paragraph of clause 5.2.3, the first paragraph of clause 5.2.4 and the first paragraph of clause 5.2.5, it allows the manufacturer to modify the equipment with the purpose of testing, which may lead to imprecise results and create a high degree of uncertainty. The reference of that harmonised standard should therefore be published in the Official Journal of the European Union with restriction.

(10)

Harmonised standard EN 301 908-1 V15.1.1, in note 3 to clause 5.3.2.1, allows the manufacturer to select an alternative testing methodology to the one laid down in that standard. This may lead to different testing results and creates legal uncertainty. The reference of that harmonised standard should therefore be published in the Official Journal of the European Union with restriction.

(11)

Harmonised standard EN 302 296 V2.2.1, in clause 5.4.2.5, describes an imprecise testing set-up by means of a coupling device, which creates a high degree of uncertainty in the interpretation of the results. The reference of that harmonised standard should therefore be published in the Official Journal of the European Union with restriction.

(12)

Harmonised standard EN 303 364-2 V1.1.1, in clauses 4.2.1.4 and 5.3.1.5, describes a particular scenario of power transfer between the transmitter and the antenna by means of WR284/WG10/R32 waveguides, which means that it covers only part of the scope of the essential requirements that it is intended to cover. The reference of that harmonised standard should therefore be published in the Official Journal of the European Union with restriction.

(13)

Harmonised standard EN 303 372-1 V1.2.1, in clause 4.3.5, provides that it is not applicable under certain technical conditions for which no mitigation measures are provided as regards the avoidance of harmful interferences. This may lead to harmful interference with satellite networks and other services. The reference of that harmonised standard should therefore be published in the Official Journal of the European Union with restriction.

(14)

Harmonised standard EN 303 980 V1.2.1, in the second sentence of clause 6.1.1, allows the manufacturer to select an alternative testing methodology to the one laid down in that standard. This may lead to different testing results and may create legal uncertainty. The reference of that harmonised standard should therefore be published in the Official Journal of the European Union with restriction.

(15)

Harmonised standard EN 303 981 V1.2.1, in the second sentence of clause 6.1.1, allows the manufacturer to select an alternative testing methodology to the one laid down in that standard. This may lead to different testing results and may create legal uncertainty. The reference of that harmonised standard should therefore be published in the Official Journal of the European Union with restriction.

(16)

Annex I to Implementing Decision (EU) 2020/167 lists the references of harmonised standards for radio equipment drafted in support of Directive 2014/53/EU that are published in the Official Journal of the European Union, while Annex II to that Implementing Decision lists the references of such harmonised standards that are published in the Official Journal of the European Union with restriction.

(17)

In order to ensure that the references of harmonised standards drafted in support of Directive 2014/53/EU are listed in one act, the references of harmonised standards EN 301 908-14 V15.1.1, EN 301 908-15 V15.1.1, EN 301 908-18 V15.1.1, EN 302 217-2 V3.3.1, EN 302 480 V2.2.1, EN 302 567 V2.2.1, EN 303 345-3 V1.1.1, EN 303 345-4 V1.1.1, EN 303 348 V1.2.1, EN 303 372-2 V1.2.1, EN 303 413 V1.2.1 and EN 303 758 V1.1.1 should be included in Annex I to Implementing Decision (EU) 2020/167 and the references of harmonised standards EN 300 718-1 V2.2.1, EN 301 444 V2.2.1, EN 301 908-1 V15.1.1, EN 302 296 V2.2.1, EN 303 364-2 V1.1.1, EN 303 372-1 V1.2.1, EN 303 980 V1.2.1 and EN 303 981 V1.2.1 should be included in Annex II to that Implementing Decision.

(18)

Harmonised standards EN 301 444 V2.2.1, EN 301 908-1 V15.1.1, EN 301 908-14 V15.1.1, EN 301 908-15 V15.1.1, EN 301 908-18 V15.1.1, EN 302 217-2 V3.3.1, EN 302 296 V2.2.1, EN 302 480 V2.2.1 and EN 302 567 V2.2.1 replace harmonised standards EN 301 444 V2.1.2, EN 301 908-1 V13.1.1, EN 301 908-14 V13.1.1, EN 301 908-15 V11.1.2, EN 301 908-18 V13.1.1, EN 302 217-2 V3.2.2, EN 302 296-2 V1.2.1, EN 302 480 V2.1.2 and EN 302 567 V1.2 respectively.

(19)

It is therefore necessary to withdraw the references of harmonised standards EN 301 444 V2.1.2, EN 301 908-15 V11.1.2, EN 302 296-2 V1.2.1, EN 302 480 V2.1.2 and EN 302 567 V1.2.1, from the C series of the Official Journal of the European Union (6). Annex III to Implementing Decision (EU) 2020/167 lists the references of harmonised standards for radio equipment drafted in support of Directive 2014/53/EU that are withdrawn from the C series of the Official Journal of the European Union. It is therefore appropriate to include those references in that Annex.

(20)

It is also necessary to withdraw the references of harmonised standards EN 301 908-1 V13.1.1, EN 301 908-14 V13.1.1, EN 301 908-18 V13.1.1 and EN 302 217-2 V3.2.2 from the L series of the Official Journal of the European Union. It is therefore appropriate to delete those references from Annexes I and II to Implementing Decision (EU) 2020/167.

(21)

In order to give manufacturers sufficient time to prepare for the application of harmonised standards EN 301 444 V2.2.1, EN 301 908-1 V15.1.1, EN 301 908-14 V15.1.1, EN 301 908-15 V15.1.1, EN 301 908-18 V15.1.1, EN 302 217-2 V3.3.1, EN 302 296 V2.2.1, EN 302 480 V2.2.1 and EN 302 567 V2.2.1, it is necessary to defer the withdrawal of the references of harmonised standards EN 301 444 V2.1.2, EN 301 908-1 V13.1.1, EN 301 908-14 V13.1.1, EN 301 908-15 V11.1.2, EN 301 908-18 V13.1.1, EN 302 217-2 V3.2.2, EN 302 296-2 V1.2.1, EN 302 480 V2.1.2 and EN 302 567 V1.2.1.

(22)

Implementing Decision (EU) 2020/167 should therefore be amended accordingly.

(23)

Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force as a matter of urgency,

(1)

Annex I is amended in accordance with Annex I to this Decision;

(2)

Annex II is amended in accordance with Annex II to this Decision;

(3)

Annex III is amended in accordance with Annex III to this Decision.