Access to European Union law
<a href="https://eur-lex.europa.eu/content/help/eurlex-content/experimental-features.html" target="_blank">More about the experimental features corner</a>
Choose the experimental features you want to try
EUR-Lex
Access to European Union law

This document is an excerpt from the EUR-Lex website

You are here
Use quotation marks to search for an "exact phrase". Append an asterisk (*) to a search term to find variations of it (transp*, 32019R*). Use a question mark (?) instead of a single character in your search term to find variations of it (ca?e finds case, cane, care).
Search tips
Need more search options? Use the Advanced search

Document 32020R1396

    Commission Implementing Regulation (EU) 2020/1396 of 5 October 2020 concerning the authorisation of geraniol, citral, 3,7,11-trimethyldodeca-2,6,10-trien-1-ol, (Z)-nerol, geranyl acetate, geranyl butyrate, geranyl formate, geranyl propionate, neryl propionate, neryl formate, neryl acetate, neryl isobutyrate, geranyl isobutyrate and prenyl acetate as feed additives for all animal species except for marine animals (Text with EEA relevance)

    C/2020/6710

    OJ L 324, 6.10.2020, p. 6–18 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

    Legal status of the document In force

    ELI: http://data.europa.eu/eli/reg_impl/2020/1396/oj

    6.10.2020   

    EN

    Official Journal of the European Union

    L 324/6

    COMMISSION IMPLEMENTING REGULATION (EU) 2020/1396

    of 5 October 2020

    concerning the authorisation of geraniol, citral, 3,7,11-trimethyldodeca-2,6,10-trien-1-ol, (Z)-nerol, geranyl acetate, geranyl butyrate, geranyl formate, geranyl propionate, neryl propionate, neryl formate, neryl acetate, neryl isobutyrate, geranyl isobutyrate and prenyl acetate as feed additives for all animal species except for marine animals

    (Text with EEA relevance)

    THE EUROPEAN COMMISSION,

    Having regard to the Treaty on the Functioning of the European Union,

    Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition (1), and in particular Article 9(2) thereof,

    Whereas:

    (1)

    Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation. Article 10(2) of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EEC (2).

    (2)

    The substances geraniol, citral, 3,7,11-trimethyldodeca-2,6,10-trien-1-ol, (Z)-nerol, geranyl acetate, geranyl butyrate, geranyl formate, geranyl propionate, neryl propionate, neryl formate, neryl acetate, neryl isobutyrate, geranyl isobutyrate and prenyl acetate (‘the substances concerned’) were authorised without a time limit by Directive 70/524/EEC as feed additives for all animal species. Those additives substances were subsequently entered in the Register of feed additives as existing products, in accordance with Article 10(1)(b) of Regulation (EC) No 1831/2003.

    (3)

    In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of the substances concerned as feed additives for all animal species. The applicant requested those additives to be classified in the additive category ‘sensory additives’ and in the functional group ‘flavouring compounds’. The application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.

    (4)

    The European Food Safety Authority (‘the Authority’) concluded in its opinion of 25 May 2016 (3) that, under the proposed conditions of use the substances concerned do not have adverse effects on animal health, human health or the environment. The Authority concluded that for the marine environment, the safe use level is estimated to be 0,05 mg/kg feed. The levels of use proposed for the substances concerned exceeds the safe level for the marine environment, therefore, the use for marine animals is not authorised. The Authority also concluded in the opinion that, since the substances concerned are efficacious when used as flavourings in food and their function in feed is essentially the same as in food, no further demonstration of efficacy was necessary. Therefore, that conclusion could be extrapolated to feed. Although the applicant withdrew the application for water for drinking, it should be possible to use the substances concerned within compound feeds which are subsequently administered via water.

    (5)

    The Authority concluded that in the absence of data the substances concerned should be considered hazardous for the skin, and eye contact and for respiratory exposure. Geraniol, citral and 3,7,11-trimethyldodeca-2,6,10-trien-1-ol, are also reported to be skin sensitisers. Consequently, appropriate protective measures should be taken. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the method of analysis of the feed additives in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.

    (6)

    The assessment of the substances concerned shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of the substances concerned should be authorised as specified in the Annex to this Regulation.

    (7)

    Restrictions and conditions should be provided for to allow better control. Since safety reasons do not require the setting of a maximum content and taking into account the re-evaluation performed by the Authority, a recommended content should be indicated on the label of the feed additive. Where such content is exceeded, certain information should be indicated on the label of premixtures.

    (8)

    Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation of the substances concerned, it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.

    (9)

    The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,

    HAS ADOPTED THIS REGULATION:

    Article 1

    Authorisation

    The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.

    Article 2

    Transitional measures

    1.   The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 26 April 2021 in accordance with the rules applicable before 26 October 2020 may continue to be placed on the market and used until the existing stocks are exhausted.

    2.   Feed materials and compound feed containing the substances specified in the Annex which are produced and labelled before 26 October 2021 in accordance with the rules applicable before 26 October 2020 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.

    3.   Feed materials and compound feed containing the substances specified in the Annex which are produced and labelled before 26 October 2022 in accordance with the rules applicable before 26 October 2020 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.

    Article 3

    Entry into force

    This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

    This Regulation shall be binding in its entirety and directly applicable in all Member States.

    Done at Brussels, 5 October 2020.

    For the Commission

    The President

    Ursula VON DER LEYEN

    (1)   OJ L 268, 18.10.2003, p. 29.

    (2)  Council Directive 70/524/EEC of 23 November 1970 concerning additives in feedingstuffs

    (OJ L 270, 14.12.1970, p. 1).

    (3)   EFSA Journal 2016;14(6):4512.

    ANNEX

    Identification number of the additive

    Name of the holder of authorisation

    Additive

    Composition, chemical formula, description, analytical method

    Species or category of animal

    Maximum age

    Minimum content

    Maximum content

    Other provisions

    End of period of authorisation

    mg of active substance/kg of complete feedingstuff with a moisture content of 12 %

    Category: Sensory additives. Functional group: Flavouring compounds

    2b02012

    -

    Geraniol

    Additive composition

    Geraniol

    Characterisation of the active substance

    Geraniol

    Produced by fractional distillation of an essential oil or by chemical synthesis

    Purity: min. 95 % assay

    Chemical formula: C10H18O

    CAS number: 106-24-1

    FLAVIS No: 02.012

    Method of analysis  (1)

    For the determination of geraniol in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 25 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b02029

    -

    3,7,11-Trimethyldodeca-2,6,10-trien-1-ol

    Additive composition

    3,7,11-Trimethyldodeca-2,6,10-trien-1-ol

    Characterisation of the active substance

    3,7,11-Trimethyldodeca-2,6,10-trien-1-ol

    Produced by chemical synthesis

    Purity: min. 96 % assay

    Chemical formula: C15H26O

    CAS number: 4602-84-0

    FLAVIS No: 02.029

    Method of analysis  (1)

    For the determination of 3,7,11-Trimethyldodeca-2,6,10-trien-1-ol in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b02058

    -

    (Z)-Nerol

    Additive composition

    (Z)-Nerol

    Characterisation of the active substance

    (Z)-Nerol

    Produced by chemical synthesis

    Purity: min. 95 % assay

    Chemical formula: C10H18O

    CAS number: 106-25-2

    FLAVIS No: 02.058

    Method of analysis  (1)

    For the determination of (Z)-nerol in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b05020

    -

    Citral

    Additive composition

    Citral

    Characterisation of the active substance

    Citral

    Produced by chemical synthesis

    Purity: min. 96 % assay

    Chemical formula: C10H16O

    CAS number: 5392-40-5

    FLAVIS No: 05.020

    Method of analysis  (1)

    For the determination of citral in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 25 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 25 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b09011

    -

    Geranyl acetate

    Additive composition

    Geranyl acetate

    Characterisation of the active substance

    Geranyl acetate

    Produced by chemical synthesis

    Purity: min. 90 % assay

    Chemical formula: C12H20O2

    CAS number: 105-87-3

    FLAVIS No: 09.011

    Method of analysis  (1)

    For the determination of geranyl acetate in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b09048

    -

    Geranyl butyrate

    Additive composition

    Geranyl butyrate

    Characterisation of the active substance

    Geranyl butyrate

    Produced by chemical synthesis

    Purity: min. 92 % assay

    Chemical formula: C14H24O2

    CAS number: 106-29-6

    FLAVIS No: 09.048

    Method of analysis  (1)

    For the determination of geranyl butyrate in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b09076

    -

    Geranyl formate

    Additive composition

    Geranyl formate

    Characterisation of the active substance

    Geranyl formate

    Produced by chemical synthesis

    Purity: min. 94 % assay

    Chemical formula: C11H18O2

    CAS number: 105-86-2

    FLAVIS No: 09.076

    Method of analysis  (1)

    For the determination of geranyl formate in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b09128

    -

    Geranyl propionate

    Additive composition

    Geranyl propionate

    Characterisation of the active substance

    Geranyl propionate

    Produced by chemical synthesis

    Purity: min. 92 % assay

    Chemical formula: C13H22O2

    CAS number: 105-90-8

    FLAVIS No: 09.128

    Method of analysis  (1)

    For the determination of geranyl propionate in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b09169

    -

    Neryl propionate

    Additive composition

    Neryl propionate

    Characterisation of the active substance

    Neryl propionate

    Produced by chemical synthesis

    Purity: min. 95 % assay

    Chemical formula: C13H22O2

    CAS number: 105-91-9

    FLAVIS No: 09.169

    Method of analysis  (1)

    For the determination of neryl propionate in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 %exceeds 5 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b09212

    -

    Neryl formate

    Additive composition

    Neryl formate

    Characterisation of the active substance

    Neryl formate

    Produced by chemical synthesis

    Purity: min. 90 % assay

    Chemical formula: C11H18O2

    CAS number: 2142-94-1

    FLAVIS No: 09.212

    Method of analysis  (1)

    For the determination of neryl formate in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b09213

    -

    Neryl acetate

    Additive composition

    Neryl acetate

    Characterisation of the active substance

    Neryl acetate

    Produced by chemical synthesis

    Purity: min. 93 % assay

    Chemical formula: C12H20O2

    CAS number: 141-12-8

    FLAVIS No: 09.213

    Method of analysis  (1)

    For the determination of neryl acetate in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b09424

    -

    Neryl isobutyrate

    Additive composition

    Neryl isobutyrate

    Characterisation of the active substance

    Neryl isobutyrate

    Produced by chemical synthesis

    Purity: min. 92 % assay

    Chemical formula: C14H24O2

    CAS number: 2345-24-6

    FLAVIS No: 09.424

    Method of analysis  (1)

    For the determination of neryl isobutyrate in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b09431

    -

    Geranyl isobutyrate

    Additive composition

    Geranyl isobutyrate

    Characterisation of the active substance

    Geranyl isobutyrate

    Produced by chemical synthesis

    Purity: min. 95 % assay

    Chemical formula: C14H24O2

    CAS number: 2345-26-8

    FLAVIS No: 09.431

    Method of analysis  (1)

    For the determination of geranyl isobutyrate in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 5 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 5 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    2b09692

    -

    Prenyl acetate

    Additive composition

    Prenyl acetate

    Characterisation of the active substance

    Prenyl acetate

    Produced by chemical synthesis

    Purity: min. 95 % assay

    Chemical formula: C7H12O2

    CAS number: 1191-16-8

    FLAVIS No: 09.692

    Method of analysis  (1)

    For the determination of prenyl acetate in the feed additive and in feed flavouring premixtures:

    Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

    All animal species except marine animals

    -

    -

    -

    1.

    The additive shall be incorporated into the feed in the form of a premixture of flavourings.

    2.

    In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

    3.

    The recommended maximum content of the active substance shall be 1 mg/kg of complete feedingstuff with a moisture content of 12 %.

    4.

    On the label of the additive the following shall be indicated:

    ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 1 mg/kg.’

    5.

    The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures, if the content of the active substance in complete feedingstuff with a moisture content of 12 % exceeds 1 mg/kg.

    6.

    For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.

    26.10.2030

    (1)  Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports

    Top