Energy Product

Definition

High rank coal used for industrial and residential applications. It has generally less than 10 % volatile matter and a high carbon content (about 90 % fixed carbon). Its gross calorific value is greater than 23 865 kJ/kg (5 700 kcal/kg) on an ash-free but moist basis.

Bituminous coal with a quality that allows the production of a coke suitable to support a blast furnace charge. Its gross calorific value is greater than 23 865 kJ/kg (5 700 kcal/kg) on an ash-free but moist basis.

Coal used for steam raising purposes and includes all bituminous coal that is not included under coking coal nor anthracite. It is characterised by higher volatile matter than anthracite (more than 10 %) and lower carbon content (less than 90 % fixed carbon). Its gross calorific value is greater than 23 865 kJ/kg (5 700 kcal/kg) on an ash-free but moist basis. If bituminous coal is used in coke ovens it should be reported as coking coal.

Refers to non-agglomerating coal with a gross calorific value between 17 435 kJ/kg (4 165 kcal/kg) and 23 865 kJ/kg (5 700 kcal/kg) containing more than 31 % volatile matter on a dry mineral matter free basis.

Non-agglomerating coal with a gross calorific value less than 17 435 kJ/kg (4 165 kcal/kg) and greater than 31 % volatile matter on a dry mineral matter free basis.

Oil shale and tar sands produced and combusted directly should be reported in this category. Oil shale and tar sands used as inputs for other transformation processes should also be reported in this category.

This includes the portion of the oil shale or tar sands consumed in the transformation process. Shale oil and other products derived from liquefaction should be reported on the Annual Oil Questionnaire.

A combustible soft, porous or compressed, sedimentary deposit of plant origin with high water content (up to 90 % in the raw state), easily cut, of light to dark brown colour. Peat used for non-energy purposes is not included.

This definition is without prejudice to the definition of renewable energy sources in Directive 2009/28/EC and to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories.

A composition fuel manufactured from hard coal fines with the addition of a binding agent. The amount of patent fuel produced may, therefore, be slightly higher than the actual amount of coal consumed in the transformation process.

The solid product obtained from carbonisation of coal, principally coking coal, at high temperature, it is low in moisture and volatile matter. Coke oven coke is used mainly in the iron and steel industry acting as energy source and chemical agent. Coke breeze and foundry coke are included in this category.

Semi-coke (a solid product obtained from carbonisation of coal at low temperature) should be included in this category. Semi-coke is used as a domestic fuel or by the transformation plant itself. This heading also includes coke, coke breeze and semi-coke made from lignite/brown coal.

By-product of hard coal used for production of town gas in gas works. Gas Coke is used for heating purposes.

A result of the destructive distillation of bituminous coal. Coal tar is the liquid by-product of the distillation of coal to make coke in the coke oven process or it is produced from brown coal (“low-temperature tar”). Coal tar can be further distilled into different organic products (e.g. benzene, toluene, naphthalene), which normally would be reported as a feedstock to the petrochemical industry.

BKB is a composition fuel manufactured from lignite/brown coal, produced by briquetting under high pressure without the addition of a binding agent. These figures include peat briquettes, dried lignite fines and dust.

Covers all types of gases produced in public utility or private plants, whose main purpose is manufacture, transport and distribution of gas. It includes gas produced by carbonisation (including gas produced by coke ovens and transferred to gas works gas), by total gasification with or without enrichment with oil products (LPG, residual fuel oil, etc.), and by reforming and simple mixing of gases and/or air, reported under the rows “From Other Sources”. Under the transformation sector identify amounts of gas works gas transferred to blended natural gas which will be distributed and consumed through the natural gas grid.

The production of other coal gases (i.e. coke oven gas, blast furnace gas and oxygen steel furnace gas) should be reported in the columns concerning such gases, and not as production of gas works gas. The coal gases transferred to gas works plants should then be reported (in their own column) in the transformation sector in the gas works plants row. The total amount of gas works gas resulting from transfers of other coal gases should appear in the production line for gas works gas.

Obtained as a by-product of the manufacture of coke oven coke for the production of iron and steel.

Produced during the combustion of coke in blast furnaces in the iron and steel industry. It is recovered and used as a fuel partly within the plant and partly in other steel industry processes or in power stations equipped to burn it. The quantity of fuel should be reported on a gross calorific value basis.

By-product of the production of steel in an oxygen furnace, recovered on leaving the furnace. The gas is also known as converter gas, LD gas or BOS gas.

The term “hard coal” refers to coal of gross calorific value greater than 23 865 kJ/kg (5 700 kcal/kg) on an ashfree but moist basis and with a mean random reflectance of vitrinite of at least 0,6. Hard coal comprises all energy products from 1 to 3 together (anthracite, coking Coal and other Bituminous Coal).

1.

Production

1.1.

Of which: underground

Applicable only for anthracite, coking coal, other bituminous coal, subbituminous coal and lignite/brown coal.

1.2.

Of which: surface

Applicable only for anthracite, coking coal, other bituminous coal, subbituminous coal and lignite/brown coal.

2.

From Other Sources

This consists of two components:

2.1.

Of which: from oil products

Not applicable for anthracite, coking coal, other bituminous coal, subbituminous coal and lignite/brown coal and peat.

E.g.: petroleum coke addition to coking coal for coke ovens

2.2.

Of which: from natural gas

Not applicable for anthracite, coking coal, other bituminous coal, subbituminous coal and lignite/brown coal and peat.

E.g.: natural gas addition to gas works gas for direct final consumption

2.3.

Of which: from renewables

Not applicable for anthracite, coking coal, other bituminous coal, subbituminous coal and lignite/brown coal and peat.

E.g.: industrial waste as binding agent in the manufacturing of patent fuel

3.

Imports

4.

Exports

5.

International Marine Bunkers

6.

Stock changes

A stock build is shown as a negative number and a stock draw is shown as a positive number.

7.

Gross consumption

8.

Statistical differences

9.

Total transformation Sector

Quantities of fuels used for the primary or secondary conversion of energy (e.g. coal to electricity, coke oven gas to electricity) or used for the transformation to derived energy products (e.g.: coking coal to coke).

9.1.

Of which: Main Activity Producer Electricity Plants

9.2.

Of which: Main Activity Producer CHP Plants

9.3.

Of which: Main Activity Producer Heat Plants

9.4.

Of which: Autoproducer Electricity plants

9.5.

Of which: Autoproducer CHP plants

9.6.

Of which: Autoproducer Heat plants

9.7.

Of which: Patent Fuel Plants

9.8.

Of which: Coke Ovens

9.9.

Of which: BKB/PB Plants

9.10.

Of which: Gas Works

9.11.

Of which: Blast Furnaces

Quantities of coking coal and/or bituminous coal (generally referred to as PCI) and coke oven coke transformed in blast furnaces. Amounts used as a fuel for heating and operation of blast furnaces (e.g.: blast furnaces gas) should not be included in the transformation sector, but reported as consumption in the energy sector.

9.12.

Of which: Coal Liquefaction

Shale oil and other products derived from liquefaction should be reported as per Chapter 4 of this annex.

9.13.

Of which: For Blended Natural Gas

Quantities of coal gases blended with natural gas.

9.14.

Of which: Not Elsewhere Specified – Transformation

1.

Total Energy Sector

1.1.

Of which: Electricity, CHP and Heat plants

1.2.

Of which: Coal Mines

1.3.

Of which: Patent Fuel Plants

1.4.

Of which: Coke Ovens

1.5.

Of which: BKB/PB Plants

1.6.

Of which: Gas Works

1.7.

Of which: Blast Furnaces

1.8.

Of which: Petroleum Refineries

1.9.

Of which: Coal Liquefaction

1.10.

Of which: Not Elsewhere Specified – Energy

2.

Distribution losses

Losses occurred due to transport and distribution, as well as flaring of manufactured gases.

3.

Total Final Consumption

4.

Total Non-energy use

4.1.

Of which: Industry, Transformation and Energy Sectors

Non-energy use in all industry, transformation and energy sub-sectors, e.g. coal used to make methanol or ammonia.

4.1.1.

From 4.1, of which: in the petrochemical sector

Non-energy use e.g. coal use as feedstocks to produce fertiliser and as feedstocks for other petrochemical products.

4.2.

Of which: Transport Sector

Non-energy use in all Transport sub-sectors.

4.3.

Of which: Other Sectors

Non-energy use in Commercial and Public Services, Residential, Agriculture and Not Elsewhere Specified Other.

1.

Final Energy Consumption

2.

Industry Sector

2.1.

Of which: Iron and Steel

2.2.

Of which: Chemical and Petrochemical

2.3.

Of which: Non-Ferrous Metals

2.4.

Of which: Non-Metallic Minerals

2.5.

Of which: Transport Equipment

2.6.

Of which: Machinery

2.7.

Of which: Mining and Quarrying

2.8.

Of which: Food, Beverages and Tobacco

2.9.

Of which: Pulp, Paper and printing

2.10.

Of which: Wood and Wood Products

2.11.

Of which: Construction

2.12.

Of which: Textile and Leather

2.13.

Of which: Not Elsewhere Specified – Industry

3.

Transport Sector

3.1.

Of which: Rail

3.2.

Of which: Domestic Navigation

3.3.

Of which: Not Elsewhere Specified – Transport

4.

Other Sectors

4.1.

Of which: Commercial and Public Services

4.2.

Of which: Residential

4.3.

Of which: Agriculture/Forestry

4.4.

Of which: Fishing

4.5.

Of which: Not Elsewhere Specified – Other

1.

Total Energy Sector

1.1.

Of which: Coal Mines

1.2.

Of which: Patent Fuel Plants

1.3.

Of which: Coke Ovens

1.4.

Of which: BKB/PB Plants

1.5.

Of which: Gas Works

1.6.

Of which: Blast Furnaces

1.7.

Of which: Petroleum Refineries

1.8.

Of which: Coal Liquefaction

1.9.

Of which: Not Elsewhere Specified – Energy

2.

Industry Sector

2.1.

Of which: Iron and Steel

2.2.

Of which: Chemical and Petrochemical

2.3.

Of which: Non-Ferrous Metals

2.4.

Of which: Non-Metallic Minerals

2.5.

Of which: Transport Equipment

2.6.

Of which: Machinery

2.7.

Of which: Mining and Quarrying

2.8.

Of which: Food, Beverages and Tobacco

2.9.

Of which: Pulp, Paper and printing

2.10.

Of which: Wood and Wood Products

2.11.

Of which: Construction

2.12.

Of which: Textile and Leather

2.13.

Of which: Not Elsewhere Specified – Industry

3.

Transport Sector

3.1.

Of which: Rail

3.2.

Of which: Not Elsewhere Specified – Transport

4.

Other Sectors:

4.1.

Of which: Commercial and Public Services

4.2.

Of which: Residential

4.3.

Of which: Agriculture/Forestry

4.4.

Of which: Fishing

4.5.

Of which: Not Elsewhere Specified

1.

Production

2.

Imports

3.

Exports

4.

Used in coke ovens

5.

Used in blast furnaces

6.

Used in Main Activity Producer Electricity, CHP and Heat Plants

7.

Used in Industry

8.

For Other Uses

1.

Underground production

2.

Surface production

3.

From other sources

4.

Stocks at end of period

4.1.

Of which: stocks at mines

103 tonnes

Exception: for gases (gas works gas, coke oven gas, blast furnace gas, oxygen steel furnace gas) the measurement is directly in energy content and the unit to be used is therefore TJ (based on gross calorific values).

MJ/tonne

1.

Indigenous Production

All dry marketable production within national boundaries, including offshore production. Production is measured after purification and extraction of NGLs and sulphur.

Excludes extraction losses and quantities reinjected, vented or flared.

Includes quantities used within the natural gas industry; in gas extraction, pipeline systems and processing plants.

1.1.

Of which: Associated Gas

Natural gas produced in association with crude oil.

1.2.

Of which: Non-Associated Gas

Natural gas originating from fields producing hydrocarbons only in gaseous form.

1.3.

Of which: Colliery Gas

Methane produced at coal mines or from coal seams, piped to the surface and consumed at collieries or transmitted by pipeline to consumers.

2.

From Other Sources

Fuel which are blended with natural gas, and consumed as a blend.

2.1.

Of which: from oil products

LPG for upgrading the quality e.g. heat content

2.2.

Of which: from coal

manufactured gas for blending with natural gas

2.3.

Of which: from renewables

biogas for blending with natural gas

3.

Imports

4.

Exports

5.

International Marine Bunkers

6.

Stock changes

A stock build is shown as a negative number and a stock draw is shown as a positive number.

7.

Gross consumption

8.

Statistical differences

The requirement of declaring calorific values is not applicable here.

9.

Recoverable gas: opening and closing stocks

Quantities of gas available for delivery during any input-output cycle. This refers to recoverable natural gas stored in special storage facilities (depleted gas and/or oil field, aquifer, salt cavity, mixed caverns, or other) as well as liquefied natural gas storage. Cushion gas should be excluded.

The requirement of declaring calorific values is not applicable here.

10.

Gas Vented

The volume of gas released into the air on the production site or at the gas processing plant.

The requirement of declaring calorific values is not applicable here.

11.

Gas Flared

The volume of gas burned in flares on the production site or at the gas processing plant.

The requirement of declaring calorific values is not applicable here.

12.

Total transformation Sector

Quantities of fuels used for the primary or secondary conversion of energy (e.g. natural gas to electricity) or used for the transformation to derived energy products (e.g. natural gas to methanol).

12.1.

Of which: Main Activity Producer Electricity Plants

12.2.

Of which: Autoproducer Electricity plants

12.3.

Of which: Main Activity Producer CHP Plants

12.4.

Of which: Autoproducer CHP plants

12.5.

Of which: Main Activity Producer Heat Plants

12.6.

Of which: Autoproducer Heat plants

12.7.

Of which: Gas Works

12.8.

Of which: Coke Ovens

12.9.

Of which: Blast Furnaces

12.10.

Of which: Gas to liquids

Quantities of natural gas used as feedstock for the conversion to liquids e.g. the quantities of fuel entering the methanol production process for transformation into methanol.

12.11.

Of which: Non specified – Transformation

1.

Total Energy Sector

1.1.

Of which: Coal Mines

1.2.

Of which: Oil and Gas extraction

1.3.

Of which: Inputs to oil refineries

1.4.

Of which: Coke Ovens

1.5.

Of which: Blast Furnaces

1.6.

Of which: Gas Works

1.7.

Of which: Electricity, CHP and Heat Plants

1.8.

Of which: Liquefaction (LNG) or Gasification

1.9.

Of which: Gas to Liquids

1.10.

Of which: Not Elsewhere Specified – Energy

2.

Losses of distribution and transport

1.

Total Final Consumption

Final energy consumption and non-energy use to be declared separately under this heading.

2.

Transport Sector

2.1.

Of which: Transport by road

Includes both CNG and biogas.

2.1.1.

Of which: Biogas fraction in Transport by Road

2.2.

Of which: Pipeline transport

2.3.

Of which: Not Elsewhere Specified – Transport

3.

Industry Sector

3.1.

Of which: Iron and Steel

3.2.

Of which: Chemical and Petrochemical

3.3.

Of which: Non-Ferrous Metals

3.4.

Of which: Non-Metallic Minerals

3.5.

Of which: Transport Equipment

3.6.

Of which: Machinery

3.7.

Of which: Mining and Quarrying

3.8.

Of which: Food, Beverages and Tobacco

3.9.

Of which: Pulp, Paper and printing

3.10.

Of which: Wood and Wood Products

3.11.

Of which: Construction

3.12.

Of which: Textile and Leather

3.13.

Of which: Not Elsewhere Specified – Industry

4.

Other Sectors

4.1.

Of which: Commercial and Public Services

4.2.

Of which: Residential

4.3.

Of which: Agriculture/Forestry

4.4.

Of which: Fishing

4.5.

Of which: Not Elsewhere Specified – Other

1.

Total Energy Sector

1.1.

Of which: Coal Mines

1.2.

Of which: Oil and Gas Extraction

1.3.

Of which: Inputs to Oil Refineries

1.4.

Of which: Coke Ovens

1.5.

Of which: Gas Works

1.6.

Of which: Blast Furnaces

1.7.

Of which: Liquefaction (LNG) & Regasification Plants

1.8.

Of which: Gas to Liquids

1.9.

Of which: Not Elsewhere Specified – Energy

2.

Industry Sector

2.1.

Of which: Iron and Steel

2.2.

Of which: Chemical and Petrochemical

2.3.

Of which: Non-Ferrous Metals

2.4.

Of which: Non-Metallic Minerals

2.5.

Of which: Transport Equipment

2.6.

Of which: Machinery

2.7.

Of which: Mining and Quarrying

2.8.

Of which: Food, Beverages and Tobacco

2.9.

Of which: Pulp, Paper and printing

2.10.

Of which: Wood and Wood Products

2.11.

Of which: Construction

2.12.

Of which: Textile and Leather

2.13.

Of which: Not Elsewhere Specified – Industry

3.

Transport Sector

3.1.

Of which: Pipeline Transport

3.2.

Of which: Not Elsewhere Specified – Transport

4.

Other Sectors

4.1.

Of which: Commercial and Public Services

4.2.

Of which: Residential

4.3.

Of which: Agriculture/Forestry

4.4.

Of which: Fishing

4.5.

Of which: Not Elsewhere Specified

1.

Name

Name of the site of the storage facility.

2.

Type

Type of storage, such as depleted gas field, salt cavern, etc.

3.

Working Capacity

Total gas storage capacity, minus the cushion gas. The cushion gas is the total volume of gas required as a permanent inventory to maintain adequate underground storage reservoir pressures and deliverability rates throughout the output cycle.

4.

Peak Output

Maximum rate at which gas can be withdrawn from the concerned storage; this corresponds to the maximum withdrawal capacity.

Unless indicated differently, quantities of natural gas are declared by its energy content, i.e. in TJ, based on the gross calorific value.

Where physical quantities are required, the unit is in 106 m3 assuming reference gas conditions (15 °C, 101,325 kPa).

KJ/m3, assuming reference gas conditions (15 °C, 101,325 kPa).

106 m3, assuming reference gas conditions (15 °C, 101,325 kPa).

106 m3/day, assuming reference gas conditions (15 °C, 101,325 kPa).

1.

Total production

1.1.

Of which: Nuclear

1.2.

Of which: Hydro

1.2.1.

Of which: part of hydro produced from pumped storage

1.3.

Of which: Geothermal

1.4.

Of which: Solar

1.5.

Of which: Tide, wave, ocean

1.6.

Of which: Wind

1.7.

Of which: Combustible fuels

Fuels capable of igniting or burning, i.e. reacting with oxygen to produce a significant rise in temperature and combusted directly for the production of electricity and/or heat.

1.8.

Of which: Heat Pumps

Heat output from heat pumps only where the heat is sold to third parties (i.e. in cases where production occurs in the Transformation Sector).

1.9.

Of which: Electric Boilers

Quantities of heat from electric boilers where the output is sold to third parties.

1.10.

Of which: Heat from Chemical Processes

Heat originating from processes without input energy, such as a chemical reaction.

Excludes waste heat originating from energy driven processes, which should be reported as heat produced from the corresponding fuel.

1.11.

Of which: Other Sources – Electricity (please specify)

1.

Total Gross Production

2.

Own Use by Plant

3.

Total Net Production

4.

Imports

See also explanation under 5 “Exports”.

5.

Exports

Amounts of electricity are considered as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not. If electricity is transited through a country, the amount should be reported as both an import and an export.

6.

Used for Heat Pumps

7.

Used for Electric Powered Steam Boilers

8.

Used for Pumped Storage

9.

Used for Electricity Production

10.

Energy Supplied

For electricity: the sum of the net electrical energy production supplied by all power stations within the country, reduced by the amount used simultaneously for heat pumps, electrically powered steam boilers, pumping and reduced or increased by exports to or imports from abroad.

For heat: the sum of the net heat production for sale by all plants within a country, reduced by heat used for electricity production and reduced or increased by exports or imports from abroad.

11.

Transmission and Distribution Losses

All losses due to transport and distribution of electrical energy and heat.

For electricity, includes losses in transformers which are not considered as integral parts of the power plants.

12.

Total Consumption (calculated)

13.

Statistical Difference

14.

Total Consumption (observed)

1.

Solid fuels and manufactured gases:

1.1.

Anthracite

1.2.

Coking Coal

1.3.

Other Bituminous Coal

1.4.

Sub-Bituminous Coal

1.5.

Lignite/Brown Coal

1.6.

Peat

1.7.

Patent Fuel

1.8.

Coke Oven Coke

1.9.

Gas Coke

1.10.

Coal Tar

1.11.

BKB (Brown Coal Briquettes)

1.12.

Gas Works Gas

1.13.

Coke Oven Gas

1.14.

Blast Furnace Gas

1.15.

Oxygen Steel Furnace Gas

2.

Oil and Petroleum Products:

2.1.

Crude Oil

2.2.

NGL

2.3.

Refinery Gas

2.4.

LPG

2.5.

Naphtha

2.6.

Kerosene Type Jet Fuel

2.7.

Other Kerosene

2.8.

Gas/Diesel (Distillate Fuel Oil)

2.9.

Heavy Fuel Oil

2.10.

Bitumen (Including Orimulsion)

2.11.

Petroleum Coke

2.12.

Other Oil Products

3.

Natural Gas

4.

Renewable Energy and Energy from Waste

4.1.

Industrial Waste (Non-Renewable)

4.2.

Municipal Waste (Renewable)

4.3.

Municipal Waste (Non-Renewable)

4.4.

Wood, Wood Waste And Other Solid Waste

4.5.

Landfill Gas

4.6.

Sewage Sludge Gas

4.7.

Other Biogas

4.8.

Liquid Biofuels

1.

Total Energy Sector

Excludes own use by plant, used for pumped storage, heat pumps and electric boilers.

1.1.

Of which: Coal Mines

1.2.

Of which: Oil and Gas Extraction

1.3.

Of which: Patent Fuel Plants

1.4.

Of which: Coke Ovens

1.5.

Of which: BKB/PB Plants

1.6.

Of which: Gas Works

1.7.

Of which: Blast Furnaces

1.8.

Of which: Petroleum Refineries

1.9.

Of which: Nuclear Industry

1.10.

Of which: Coal Liquefaction Plants

1.11.

Of which: Liquefaction (LNG)/Regasification Plants

1.12.

Of which: Gasification Plants (biogas)

1.13.

Of which: Gas-to-Liquids

1.14.

Of which: Not Elsewhere Specified – Energy

1.

Industry Sector

1.1.

Of which: Iron and Steel

1.2.

Of which: Chemical and Petrochemical

1.3.

Of which: Non-Ferrous Metals

1.4.

Of which: Non-Metallic Minerals

1.5.

Of which: Transport Equipment

1.6.

Of which: Machinery

1.7.

Of which: Mining and Quarrying

1.8.

Of which: Food, Beverages and Tobacco

1.9.

Of which: Pulp, Paper and printing

1.10.

Of which: Wood and Wood Products

1.11.

Of which: Construction

1.12.

Of which: Textile and Leather

1.13.

Of which: Not Elsewhere Specified – Industry

2.

Transport Sector

2.1.

Of which: Rail

2.2.

Of which: Pipeline transport

2.3.

Of which: Not Elsewhere Specified – Transport

3.

Residential Sector

4.

Commercial and Public Services

5.

Agriculture/Forestry

6.

Fishing

7.

Not Elsewhere Specified – Other

1.

Total Energy Sector

1.1.

Of which: Coal Mines

1.2.

Of which: Oil and Gas Extraction

1.3.

Of which: Patent Fuel Plants

1.4.

Of which: Coke Ovens

1.5.

Of which: BKB/PB Plants

1.6.

Of which: Gas Works

1.7.

Of which: Blast Furnaces

1.8.

Of which: Petroleum Refineries

1.9.

Of which: Coal Liquefaction Plants

1.10.

Of which: Liquefaction (LNG)/Regasification Plants

1.11.

Of which: Gasification Plants (biogas)

1.12.

Of which: Gas-to-Liquids

1.13.

Of which: Charcoal Production Plants

1.14.

Of which: Not Elsewhere Specified – Energy

2.

All other sectors: identical to the aggregate list as per “3.2.3 Energy end-use specification”.

1.

Total

2.

Nuclear

3.

Hydro

3.1.

Of which: pumped storage

4.

Geothermal

5.

Solar

6.

Tide, wave, ocean

7.

Wind

8.

Combustible fuels

8.1.

Of which: Steam

8.2.

Of which: Internal combustion

8.3.

Of which: Gas turbine

8.4.

Of which: Combined cycle

8.5.

Of which: Other

To be specified if declared.

9.

Peak load

10.

Available capacity at time of peak

11.

Date and time of peak load occurrence

1.

Single Fuel Fired:

1.1.

Fired with Coal or coal products

Includes coke oven gas, blast furnace and oxygen steel furnace gas capacity.

1.2.

Fired with Liquids fuels

Includes refinery gas capacity.

1.3.

Fired with Natural gas

Includes gas works gas capacity.

1.4.

Fired with Peat

1.5.

Fired with Combustible renewables and wastes

2.

Multi-Fired, Solids And Liquids

3.

Multi-Fired, Solids And Natural Gas

4.

Multi-Fired, Liquids And Natural Gas

5.

Multi-Fired, Solids Liquids And Natural Gas

1.

Enrichment capacity

The annual separative work capacity of operational enrichment plants (isotopic separation of Uranium).

2.

Production capacity of fresh fuel elements

The annual production capacity of fuel fabrication plants. MOX fuel fabrication plants are excluded.

3.

Production capacity of MOX fuel fabrication plants

The annual production capacity of MOX fuel fabrication plants. MOX fuel contains a mixture of Plutonium and Uranium (Mixed Oxide).

4.

Production of fresh fuel elements

Production of finished fresh fuel elements in nuclear fuel fabrication plants. Rods or other partial products are not included. Fabrication plants producing MOX fuel are also excluded.

5.

Production of MOX fuel elements

Production of finished fresh fuel elements in MOX fuel fabrication plants. Rods or other partial products are not included.

6.

Production of nuclear heat

The total amount of heat generated by nuclear reactors for the production of electricity or for other useful applications of heat.

7.

Annual average burnup of definitively discharged irradiated fuel elements

Calculated average of the burnup of the fuel elements which have been definitively discharged from the nuclear reactors during the concerned reference year. Excludes fuel elements which are temporarily discharged and are likely to be reloaded again later.

8.

Production of Uranium and Plutonium in reprocessing plants

Uranium and Plutonium produced during the reference year in reprocessing plants.

9.

Capacity (Uranium and Plutonium) of reprocessing plants

Annual reprocessing capacity of Uranium and Plutonium.

Electricity: GWh

Heat: TJ

Solid fuels and manufactured gases: the units of measurement in Chapter 1 of this annex apply.

Natural gas: the units of measurement in chapter 2 of this annex apply.

Oil and petroleum products: the units of measurement in chapter 4 of this annex apply.

Renewables and waste: the units of measurement in chapter 5 of this annex apply.

Uranium and Plutonium: tHM (tons of heavy metal).

Electrical generation capacity: MWe

Heat generation capacity: MWt

Enrichment capacity (isotopic separation of Uranium): tSWU (tons of Separative Work Units).

Production capacity of nuclear fuel elements: tHM (tons of heavy metal).

Energy Product

Definition

Crude oil is a mineral oil of natural origin comprising a mixture of hydrocarbons and associated impurities, such as sulphur. It exists in the liquid phase under normal surface temperature and pressure and its physical characteristics (density, viscosity, etc.) are highly variable. This category includes field or lease condensate recovered from associated and non-associated gas where it is commingled with the commercial crude oil stream.

NGL are liquid or liquefied hydrocarbons recovered from natural gas in separation facilities or gas processing plants. Natural gas liquids include ethane, propane, butane (normal and iso-), (iso) pentane and pentanes plus (sometimes referred to as natural gasoline or plant condensate).

A refinery feedstock is a processed oil destined for further processing (e.g. straight run fuel oil or vacuum gas oil) excluding blending. With further processing, it will be transformed into one or more components and/or finished products. This definition also covers returns from the petrochemical industry to the refining industry (e.g. pyrolysis gasoline, C4 fractions, gasoil and fuel oil fractions).

Additives are non-hydrocarbon compounds added to or blended with a product to modify fuel properties (octane, cetane, cold properties, etc.):

Note: Quantities of additives/oxygenates (alcohols, ethers, esters and other chemical compounds) reported in this category should relate to the quantities destined for blending with fuels or for fuel use.

Biogasoline and Biodiesels. The definitions of Chapter 5, Renewable Energy and Energy from Waste, apply.

Quantities of liquid biofuels reported in this category relate to the biofuel and not to the total volume of liquids into which the biofuels are blended.

Excludes all trade of biofuels which have not been blended with transport fuels (i.e. in their pure form); these should be reported as per Chapter 5. The biofuels traded as part of transport fuels should be reported in the appropriate product indicating the biofuel portion.

Synthetic crude oil from tar sands, shale oil, etc., liquids from coal liquefaction, (see Chapter 1), output of liquids from natural gas conversion into gasoline (see Chapter 2), hydrogen and emulsified oils (e.g. Orimulsion).

Excludes oil shale production, for which Chapter 1 applies.

The production of shale oil (secondary product) is to be reported as “From other sources” in the “Other hydrocarbons category”.

Refinery gas includes a mixture of non-condensible gases mainly consisting of hydrogen, methane, ethane and olefins obtained during distillation of crude oil or treatment of oil products (e.g. cracking) in refineries. This also includes gases which are returned from the petrochemical industry.

A naturally gaseous straight-chain hydrocarbon, (C2H6) extracted from natural gas and refinery gas streams.

LPG are light paraffinic hydrocarbons derived from the refinery processes, crude oil stabilisation and natural gas processing plants. They consist mainly of propane (C3H8) and butane (C4Hl0) or a combination of the two. They could also include propylene, butylene, isopropylene and isobutylene. LPG are normally liquefied under pressure for transportation and storage.

Naphtha is a feedstock destined for either the petrochemical industry (e.g. ethylene manufacture or aromatics production) or for gasoline production by reforming or isomerisation within the refinery.

Naphtha comprises material in the 30 °C and 210 °C distillation range or part of this range.

Motor gasoline consists of a mixture of light hydrocarbons distilling between 35 °C and 215 °C. It is used as a fuel for land based spark ignition engines. Motor gasoline may include additives, oxygenates and octane enhancers, including lead compounds such as TEL and TML.

Includes motor gasoline blending components (excluding additives/oxygenates), e.g. alkylates, isomerate, reformate, cracked gasoline destined for use as finished motor gasoline.

The definitions of Chapter 5, Renewable Energy and Energy from Waste, apply.

Motor spirit prepared especially for aviation piston engines, with an octane number suited to the engine, a freezing point of – 60 °C and a distillation range usually within the limits of 30 °C and 180 °C.

This includes all light hydrocarbon oils for use in aviation turbine power units, distilling between 100 °C and 250 °C. They are obtained by blending kerosenes and gasoline or naphthas in such a way that the aromatic content does not exceed 25 % in volume, and the vapour pressure is between 13,7kPa and 20,6kPa.

Distillate used for aviation turbine power units. It has the same distillation characteristics between 150 °C and 300°C (generally not above 250 °C) and flash point as kerosene. In addition, it has particular specifications (such as freezing point) which are established by the International Air Transport Association (IATA).

Includes kerosene blending components.

Refined petroleum distillate used in sectors other than aircraft transport. It distils between 150 °C and 300 °C.

Gas/diesel oil is primarily a medium distillate distilling between 180 °C and 380 °C. Includes blending components. Several grades are available depending on uses:

On-road diesel oil for diesel compression ignition (cars, trucks, etc.), usually of low sulphur content;

The definitions of Chapter 5, Renewable Energy and Energy from Waste, apply.

Light heating oil for industrial and commercial uses, marine diesel and diesel used in rail traffic, other gas oil including heavy gas oils which distil between 380 °C and 540 °C and which are used as petrochemical feedstocks.

All residual (heavy) fuel oils (including those obtained by blending). Kinematic viscosity is above 10 cSt at 80 °C. The flash point is always above 50 °C and density is always more than 0,90 kg/l.

Heavy fuel oil with sulphur content lower than 1 %.

Heavy fuel oil with sulphur content of 1 % or higher.

Refined distillate intermediates with a distillation in the naphtha/kerosene range. They are sub-divided as:

Hydrocarbons produced from distillate by product; they are mainly used to reduce friction between bearing surfaces.

Includes all finished grades of lubricating oil, from spindle oil to cylinder oil, and those used in greases, motor oils and all grades of lubricating oil base stocks.

Solid, semi-solid or viscous hydrocarbon with a colloidal structure, being brown to black in colour, obtained as a residue in the distillation of crude oil, by vacuum distillation of oil residues from atmospheric distillation. Bitumen is often referred to as asphalt and is primarily used for construction of roads and for roofing material.

Includes fluidised and cut back bitumen.

These are saturated aliphatic hydrocarbons. These waxes are residues extracted when dewaxing lubricant oils. They have a crystalline structure which is more-or-less fine according to the grade. Their main characteristics are as follows: they are colourless, odourless and translucent, with a melting point above 45 °C.

Black solid by-product, obtained mainly by cracking and carbonising petroleum derived feedstock, vacuum bottoms, tar and pitches in processes such as delayed coking or fluid coking. It consists mainly of carbon (90 to 95 %) and has a low ash content. It is used as a feedstock in coke ovens for the steel industry, for heating purposes, for electrode manufacture and for production of chemicals. The two most important qualities are “green coke” and “calcinated coke”.

Includes “catalyst coke” deposited on the catalyst during refining processes; this coke is not recoverable and is usually burned as refinery fuel.

All products not specifically mentioned above, for example: tar and sulphur.

Includes aromatics (e.g. BTX or benzene, toluene and xylene) and olefins (e.g. propylene) produced within refineries.

1.

Indigenous Production

Not applicable for refinery feedstocks and for biofuels.

2.

From Other SourcesAdditives, Biofuels and Other hydrocarbons, the production of which has already been covered in other fuel balances.

Not applicable for crude oil, NGL and refinery feedstocks.

2.1.

Of which: from Coal

Includes liquids produced from coal liquefaction plants, liquid output from coke ovens.

2.2.

Of which: from Natural Gas

The manufacture of synthetic gasoline may require natural gas as feedstock. The amount of gas for methanol manufacture is declared according to Chapter 2, while the receipts of methanol are declared here.

2.3.

Of which: from Renewables

Includes biofuels which are for blending with transport fuels.

Production is declared as per Chapter 5, while amounts for blending are declared here.

3.

Backflows From Petrochemical Sector

Finished or semi-finished products which are returned from final consumers to refineries for processing, blending or sale. They are usually by-products of petrochemical manufacturing.

Only applicable for refinery feedstocks.

4.

Products Transferred

Imported petroleum products which are reclassified as feedstocks for further processing in the refinery, without delivery to final consumers.

Only applicable for refinery feedstocks.

5.

Imports and exports

Includes quantities of crude oil and products imported or exported under processing agreements (i.e. refining on account). Crude oil and NGLs should be reported as coming from the country of ultimate origin; refinery feedstocks and finished products should be reported as coming from the country of last consignment.

Includes any gas liquids (e.g. LPG) extracted during the regasification of imported liquefied natural gas and petroleum products imported or exported directly by the petrochemical industry.

Note: All trade of biofuels which have not been blended with transport fuels (i.e. in their pure form) should be reported in the Renewables Questionnaire.

Re-exports of oil imported for processing within bonded areas should be included as an export of product from the processing country to the final destination.

6.

Direct Use

Crude oil, NGL, Additives and Oxygenates (and the part which are biofuels), and other hydrocarbons used directly without being processed in petroleum refineries.

Includes crude oil burned for electricity generation.

7.

Stock changes

A stock build is shown as a negative number and a stock draw is shown as a positive number.

8.

Calculated Refinery Intake

Total amount of product calculated to have entered the refinery process. It is defined as:

Indigenous production + From other sources + Backflows from industry + Products transferred + Imports – Exports – Direct use + Stock changes

9.

Statistical differences

Defined as the calculated refinery intake minus the observed one.

10.

Observed Refinery Intake

Amounts measured as input to refineries

11.

Refinery Losses

The difference between Refinery intake (observed) and Gross refinery output. Losses may occur during the distillation processes due to evaporation. Reported losses are positive. There may be volumetric gains but no gains in mass.

12.

Opening and Closing Total Stocks On National Territory

All stocks on national territory, including stocks held by governments, by major consumers or by stockholding organisations, stocks held on board incoming ocean vessels, stocks held in bonded areas and stocks held for others, whether under bilateral government agreement or not. Opening and closing refers to the first and to the last day of the reporting period respectively.

13.

Net Calorific Value

Production, imports and exports, and overall average.

1.

Primary Product Receipts

Includes quantities of indigenous or imported crude oil (including condensate) and indigenous NGL used directly without being processed in a petroleum refinery and quantities of Backflows from the Petrochemical industry which, although not primary fuel, are used directly.

2.

Gross Refinery Output

Production of finished products at a refinery or blending plant.

Excludes refinery losses, but includes Refinery fuel.

3.

Recycled Products

Finished products which pass a second time through the marketing network, after having been once delivered to final consumers (e.g. used lubricants which are reprocessed). These quantities should be distinguished from petrochemical Backflows.

4.

Refinery Fuel

Petroleum products consumed in support of the operation of a refinery.

Excludes products used by oil companies outside the refining process, e.g. bunkers or oil tankers.

Includes fuels used for the production at the refineries of electricity and heat sold.

4.1.

Of which: used for electricity generation

Amounts used to generate electricity in plants at refineries.

4.2.

Of which: used for CHP production

Amounts used in CHP plants at refineries.

5.

Imports and Exports

6.

International Marine Bunkers

7.

Interproduct Transfers

Quantities reclassified either because their specification has changed or because they are blended into another product.

A negative entry for one product is compensated by a positive entry (or several entries) for one or several products and vice versa; the total net effect should be zero.

8.

Products Transferred

Imported petroleum products which are reclassified as feedstocks for further processing in the refinery, without delivery to final consumers.

9.

Stock Changes

A stock build is shown as a negative number and a stock draw is shown as a positive number.

10.

Calculated Gross Inland Deliveries

This is defined as:

Primary product receipts + Gross refinery output + Recycled products – Refinery fuel + Imports – Exports – International marine bunkers + Interproduct transfers – Products transferred + Stock changes

11.

Statistical Difference

Defined as the calculated gross inland delivery minus the observed one.

12.

Observed Gross Inland Deliveries

The observed delivery of finished petroleum products from primary sources (e.g. refineries, blending plants, etc.) to the inland market.

This figure may differ from the calculated figure due, for example, to differences in coverage and/or differences of definition in different reporting systems.

12.1.

Of which: Gross Deliveries To The Petrochemical Sector

Quantities of fuels delivered to the Petrochemical sector.

12.2.

Of which: Energy Use In The Petrochemical Sector

Quantities of oil used as fuel for petrochemical processes such as steam cracking.

12.3.

of which: Non-Energy Use In The Petrochemical Sector

Quantities of oil used in the petrochemical sector for the purpose of producing ethylene, propylene, butylene, synthesis gas, aromatics, butadiene and other hydrocarbon-based raw materials in processes such as steam cracking, aromatics plants and steam reforming. Excludes amounts of oil used for fuel purposes.

13.

Backflows From Petrochemical Sector To Refineries

14.

Opening and Closing Stock Levels

All stocks on national territory, including stocks held by governments, by major consumers or by stockholding organisations, stocks held on board incoming ocean vessels, stocks held in bonded areas and stocks held for others, whether under bilateral government agreement or not. Opening and closing refers to the first and to the last day of the reporting period respectively.

15.

Stock Changes At Public Utilities

Changes in stocks which are held by public utilities and not included in the Stock levels and Stock changes reported elsewhere. A stock build is shown as a negative number and a stock draw is shown as a positive number.

Includes Crude oil and NGL used for direct burn, if applicable.

16.

Net Calorific Value Of Gross Inland Deliveries

1.

Total transformation Sector

Total quantities of fuels used for the primary or secondary conversion of energy.

1.1.

Of which: Main Activity Producer Electricity Plants

1.2.

Of which: Autoproducer Electricity plants

1.3.

Of which: Main Activity Producer CHP Plants

1.4.

Of which: Autoproducer CHP plants

1.5.

Of which: Main Activity Producer Heat Plants

1.6.

Of which: Autoproducer Heat plants

1.7.

Of which: Gas Works/Gasification Plants

1.8.

Of which: Blended Natural Gas

1.9.

Of which: Coke Ovens

1.10.

Of which: Blast Furnaces

1.11.

Of which: Petrochemical Industry

1.12.

Of which: Patent Fuel Plants

1.13.

Of which: Not Elsewhere Specified – Transformation

1.

Total Energy Sector

Total quantity used as energy in the energy sector

1.1.

Of which: Coal Mines

1.2.

Of which: Oil and Gas Extraction

1.3.

Of which: Coke Ovens

1.4.

Of which: Blast Furnaces

1.5.

Of which: Gas Works

1.6.

Of which: Power Plants

Electricity, CHP and heat plants.

1.7.

Of which: Not Elsewhere Specified – Energy

2.

Distribution losses

Losses occurred outside the refinery due to transport and distribution.

Includes pipeline losses.

1.

Final Energy Consumption

2.

Industry Sector

2.1.

Of which: Iron and Steel

2.2.

Of which: Chemical and Petrochemical

2.3.

Of which: Non-Ferrous Metals

2.4.

Of which: Non-Metallic Minerals

2.5.

Of which: Transport Equipment

2.6.

Of which: Machinery

2.7.

Of which: Mining and Quarrying

2.8.

Of which: Food, Beverages and Tobacco

2.9.

Of which: Pulp, Paper and printing

2.10.

Of which: Wood and Wood Products

2.11.

Of which: Construction

2.12.

Of which: Textile and Leather

2.13.

Of which: Not Elsewhere Specified – Industry

3.

Transport Sector

3.1.

Of which: International Aviation

3.2.

Of which: Domestic Aviation

3.3.

Of which: Road

3.4.

Of which: Rail

3.5.

Of which: Domestic Navigation

3.6.

Of which: Pipeline Transport

3.7.

Of which: Not Elsewhere Specified – Transport

4.

Other Sectors

4.1.

Of which: Commercial and Public Services

4.2.

Of which: Residential

4.3.

Of which: Agriculture/Forestry

4.4.

Of which: Fishing

4.5.

Of which: Not Elsewhere Specified – Other

5.

Total Non-Energy Use

Quantities used as raw materials in the different sectors and not consumed as a fuel or transformed into another fuel. These quantities are included into the aggregates listed above.

5.1.

Of which: Transformation Sector

5.2.

Of which: Energy Sector

5.3.

Of which: Transport Sector

5.4.

Of which: Industry Sector

5.4.1.

Industry Sector of which: Chemical (incl. Petrochemical)

5.5.

Of which: Other Sectors

1.

Total Energy Sector

Total quantity used as energy in the energy sector

1.1.

Of which: Coal Mines

1.2.

Of which: Oil and Gas Extraction

1.3.

Of which: Coke Ovens

1.4.

Of which: Blast Furnaces

1.5.

Of which: Gas Works

1.6.

Of which: Not Elsewhere Specified – Energy

2.

Industry Sector

2.1.

Of which: Iron and Steel

2.2.

Of which: Chemical and Petrochemical

2.3.

Of which: Non-Ferrous Metals

2.4.

Of which: Non-Metallic Minerals

2.5.

Of which: Transport Equipment

2.6.

Of which: Machinery

2.7.

Of which: Mining and Quarrying

2.8.

Of which: Food, Beverages and Tobacco

2.9.

Of which: Pulp, Paper and printing

2.10.

Of which: Wood and Wood Products

2.11.

Of which: Construction

2.12.

Of which: Textile and Leather

2.13.

Of which: Not Elsewhere Specified – Industry

3.

Transport Sector

3.1.

Of which: Pipeline Transport

3.2.

Of which: Not Elsewhere Specified – Transport

4.

Other Sectors

4.1.

Of which: Commercial and Public Services

4.2.

Of which: Residential

4.3.

Of which: Agriculture/Forestry

4.4.

Of which: Fishing

4.5.

Of which: Not Elsewhere Specified – Other

103 tonnes

MJ/tonne

Energy Product

Definition

Potential and kinetic energy of water converted into electricity in hydroelectric plants. Pumped storage must be included. Production must be reported for plant sizes of < 1 MW, 1 to < 10 MW, ≥ 10 MW and from pumped storage.

Energy available as heat emitted from within the earth’s crust, usually in the form of hot water or steam. This energy production is the difference between the enthalpy of the fluid produced in the production borehole and that of the fluid eventually disposed of. It is exploited at suitable sites:

Solar radiation exploited for hot water production and electricity generation. This energy production is the heat available to the heat transfer medium, i.e. the incident solar energy less the optical and collectors losses. Passive solar energy for the direct heating, cooling and lighting of dwellings or other buildings is not included.

Sunlight converted into electricity by the use of solar cells usually made of semi-conducting material which exposed to light will generate electricity.

Heat from solar radiation; can consist of:

Mechanical energy derived from tidal movement, wave motion or ocean current and exploited for electricity generation.

Kinetic energy of wind exploited for electricity generation in wind turbines.

Report wastes of industrial non-renewable origin (solids or liquids) combusted directly for the production of electricity and/or heat. The quantity of fuel used should be reported on a net calorific value basis. Renewable industrial waste should be reported in the Solid Biomass, Biogas and/or Liquid Biofuels categories.

Wastes produced by households, hospitals and the tertiary sector incinerated at specific installations, on a net calorific value basis.

The portion of municipal waste which is of biological origin.

The portion of municipal waste which is of non-biological origin.

Covers organic, non-fossil material of biological origin which may be used as fuel for heat production or electricity generation. It comprises:

The solid residue of the destructive distillation and pyrolysis of wood and other vegetal material.

Purpose-grown energy crops (poplar, willow etc.), a multitude of woody materials generated by an industrial process (wood/paper industry in particular) or provided directly by forestry and agriculture (firewood, wood chips, wood pellets, bark, sawdust, shavings, chips, black liquor etc.) as well as wastes such as straw, rice husks, nut shells, poultry litter, crushed grape dregs etc. Combustion is the preferred technology for these solid wastes. The quantity of fuel used should be reported on a net calorific value basis.

A gas composed principally of methane and carbon dioxide produced by anaerobic digestion of biomass.

A biogas formed by the digestion of landfilled wastes.

A biogas produced from the anaerobic fermentation of sewage sludge.

Biogas produced from the anaerobic fermentation of animal slurries and of wastes in abattoirs, breweries and other agro-food industries.

The quantities of liquid biofuels reported in this category should relate to the quantities of biofuel and not to the total volume of liquids into which the biofuels are blended. For the particular case of imports and exports of liquid biofuels, only trade of quantities that have not been blended with transport fuels is concerned (i.e. in their pure form); trade of liquids biofuels blended to transport fuels should be reported in the oil data in Chapter 4.

The following liquid biofuels are concerned:

This category includes bioethanol (ethanol produced from biomass and/or the biodegradable fraction of waste), biomethanol (methanol produced from biomass and/or the biodegradable fraction of waste), bioETBE (ethyl-tertio-butyl-ether produced on the basis of bioethanol; the percentage by volume of bioETBE that is calculated as biofuel is 47 %) and bioMTBE (methyl-tertio-butyl-ether produced on the basis of biomethanol: the percentage by volume of bioMTBE that is calculated as biofuel is 36 %).

This category includes biodiesel (a methyl-ester produced from vegetable or animal oil, of diesel quality), biodimethylether (dimethylether produced from biomass), Fischer Tropsch (Fischer Tropsch produced from biomass), cold extracted bio-oil (oil produced from oil seed through mechanical processing only) and all other liquid biofuels which are added to, blended with or used straight as transport diesel.

Liquid biofuels, used directly as fuel, not included in biogasoline or biodiesels.

1.

Production

2.

Imports

3.

Exports

4.

Stock changes

A stock build is shown as a negative number and a stock draw is shown as a positive number.

5.

Gross consumption

6.

Statistical differences

7.

Total transformation Sector

Quantities of renewables and wastes used for the conversion of primary forms of energy to secondary (e.g. landfill gases to electricity) or used for the transformation to derived energy products (e.g.: biogas used for blended natural gas).

7.1.

Of which: Main Activity Producer Electricity Plants

7.2.

Of which: Main Activity Producer CHP Plants

7.3.

Of which: Main Activity Producer Heat Plants

7.4.

Of which: Autoproducer Electricity plants

7.5.

Of which: Autoproducer CHP plants

7.6.

Of which: Autoproducer Heat plants

7.7.

Of which: Patent Fuel Plants

Quantities of renewables and wastes used to produce patent fuel. Renewables and wastes used for heating and operation of equipment must be reported as consumption in the Energy sector.

7.8.

Of which: BKB/PB Plants

Quantities of renewables and wastes used to produce BKB. Renewables and wastes used for heating and operation of equipment must be reported as consumption in the Energy sector.

7.9.

Of which: Gas Works Gas

Quantities of renewables and wastes used to produce gas works gas. Renewables and wastes used for heating and operation of equipment must be reported as consumption in the Energy sector.

7.10.

Of which: For blended natural gas

Quantities of biogases blended with natural gas.

7.11.

Of which: For Blending to Motor Gasoline/Diesel

Quantities of liquid biofuels which are not delivered for final consumption but are used with other petroleum products reported as per chapter 4 of this annex.

7.12.

Of which: Charcoal production plants

Quantities of wood used for the production of Charcoal.

7.13.

Of which: Not Elsewhere Specified – Transformation

1.

Total Energy Sector

Renewable energies and wastes consumed by the energy industry to support the transformation activity. For example renewable energies and wastes used for heating, lighting or operating pumps/compressors.

Quantities of renewable energies and wastes transformed into another energy form should be reported under the Transformation sector.

1.1.

Of which: Gasification plants

1.2.

Of which: Public Electric, CHP & Heat plants

1.3.

Of which: Coal Mines

1.4.

Of which: Patent Fuel Plants

1.5.

Of which: Coke Ovens

1.6.

Of which: Petroleum Refineries

1.7.

Of which: BKB/PB Plants

1.8.

Of which: Gas Works Gas

1.9.

Of which: Blast Furnaces

1.10.

Of which: Charcoal production plants

1.11.

Of which: Not Elsewhere Specified

2.

Distribution Losses

All losses occurred due to transport and distribution.

1.

Final Energy Consumption

2.

Industry Sector

2.1.

Of which: Iron and Steel

2.2.

Of which: Chemical and Petrochemical

2.3.

Of which: Non-Ferrous Metals

2.4.

Of which: Non-Metallic Minerals

2.5.

Of which: Transport Equipment

2.6.

Of which: Machinery

2.7.

Of which: Mining and Quarrying

2.8.

Of which: Food, Beverages and Tobacco

2.9.

Of which: Pulp, Paper and printing

2.10.

Of which: Wood and Wood Products

2.11.

Of which: Construction

2.12.

Of which: Textile and Leather

2.13.

Of which: Not Elsewhere Specified – Industry

3.

Transport Sector

3.1.

Of which: Rail

3.2.

Of which: Road

3.3.

Of which: Domestic Navigation

3.4.

Of which: Not Elsewhere Specified – Transport

4.

Other Sectors

4.1.

Of which: Commercial and Public Services

4.2.

Of which: Residential

4.3.

Of which: Agriculture/Forestry

4.4.

Of which: Fishing

4.5.

Of which: Not Elsewhere Specified – Other

1.

Hydro power

Capacity must be reported for plant sizes of < 1 MW, 1 to < 10 MW, ≥ 10 MW and from pumped storage, as well as for all sizes combined. Detailed plant sizes should be reported net of pumped storage.

2.

Geothermal

3.

Solar Photovoltaic

4.

Solar Thermal

5.

Tide, Wave, Ocean

6.

Wind

7.

Industrial Waste (non-renewable)

8.

Municipal Waste

9.

Wood, Wood Wastes, Other Solid Wastes

10.

Landfill Gas

11.

Sewage Sludge Gas

12.

Other Biogas

13.

Liquid Biofuels

1.

Liquid Biofuels:

1.1.

Of which: Biogasoline

1.2.

Of which: Biodiesels

1.3.

Of which: Other Liquid Biofuels

1.

Total Energy Sector

1.1.

Of which: Gasification plants

1.2.

Of which: Coal Mines

1.3.

Of which: Patent Fuel Plants

1.4.

Of which: Coke Ovens

1.5.

Of which: Petroleum Refineries

1.6.

Of which: BKB/PB Plants

1.7.

Of which: Gas Works Gas

1.8.

Of which: Blast Furnaces

1.9.

Of which: Charcoal production plants

1.10.

Of which: Not Elsewhere Specified

2.

Industry Sector

2.1.

Of which: Iron and Steel

2.2.

Of which: Chemical and Petrochemical

2.3.

Of which: Non-Ferrous Metals

2.4.

Of which: Non-Metallic Minerals

2.5.

Of which: Transport Equipment

2.6.

Of which: Machinery

2.7.

Of which: Mining and Quarrying

2.8.

Of which: Food, Beverages and Tobacco

2.9.

Of which: Pulp, Paper and printing

2.10.

Of which: Wood and Wood Products

2.11.

Of which: Construction

2.12.

Of which: Textile and Leather

2.13.

Of which: Not Elsewhere Specified – Industry

3.

Transport Sector

3.1.

Of which: Rail

3.2.

Of which: Not Elsewhere Specified – Transport

4.

Other Sectors

4.1.

Of which: Commercial and Public Services

4.2.

Of which: Residential

4.3.

Of which: Agriculture/Forestry

4.4.

Of which: Fishing

4.5.

Of which: Not Elsewhere Specified – Other

1.

Biogasoline

2.

Biodiesel

3 .

Other liquid biofuels

4.

Charcoal

MWh

TJ

Biogasoline, biodiesels and other liquid biofuels: tonnes

Charcoal: 1 000 tonnes

All others: TJ (on the basis of net calorific values).

1 000 m2

Biofuels: tonnes/year

All others: MWe

KJ/kg (net calorific value).