EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 32005R0883

Commission Regulation (EC) No 883/2005 of 10 June 2005 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Text with EEA relevance)

OJ L 348M, 24.12.2008, p. 117–150 (MT)
OJ L 148, 11.6.2005, p. 5–24 (ES, CS, DA, DE, ET, EL, EN, FR, IT, LV, LT, HU, NL, PL, PT, SK, SL, FI, SV)
Special edition in Bulgarian: Chapter 02 Volume 017 P. 236 - 256
Special edition in Romanian: Chapter 02 Volume 017 P. 236 - 256
Special edition in Croatian: Chapter 02 Volume 018 P. 23 - 42

Legal status of the document No longer in force, Date of end of validity: 30/04/2016; Implicitly repealed by 32016R0481

ELI: http://data.europa.eu/eli/reg/2005/883/oj

11.6.2005   

EN

Official Journal of the European Union

L 148/5


COMMISSION REGULATION (EC) No 883/2005

of 10 June 2005

amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code

(Text with EEA relevance)

THE COMMISSION OF THE EUROPEAN COMMUNITIES,

Having regard to the Treaty establishing the European Community,

Having regard to Council Regulation (EEC) No 2913/92 of 12 October 1992 establishing the Community Customs Code (1), and in particular Article 247 thereof,

Whereas:

(1)

The Customs Convention on the international transport of goods under cover of TIR carnets (TIR Convention) of 14 November 1975 was approved on behalf of the Community by Council Regulation (EEC) No 2112/78 (2) and entered into force in the Community on 20 June 1983 (3). Given the importance of international trade for the Community it is necessary to modernise the customs formalities concerning the TIR procedure. Article 49 of the TIR Convention envisages the application of greater facilities for the benefit of economic operators provided such facilities do not impede the application of the provisions of the Convention. Currently the Community rules concerning the TIR procedure do not provide for the status of authorised consignee. In order to meet the needs of economic operators and to facilitate international trade it is desirable to develop provisions, based on the existing Community/common transit rules, allowing the status of authorised consignee to be used in conjunction with the TIR procedure.

(2)

The Convention on Temporary Admission of 26 June 1990 (the Istanbul Convention) and the Annexes thereto were approved by the European Community by Council Decision 93/329/EEC (4). Annex A to the Istanbul Convention replaces the Customs Convention on the ATA carnet for the temporary admission of goods of 6 December 1961 (the ATA Convention) with regard to relations between countries which have accepted the Istanbul Convention and its Annex A. It is therefore necessary to amend the provisions relating to the ATA procedure to include references to the Istanbul Convention. However, in order to facilitate international trade between the Community and those countries that have not accepted Annex A to the Istanbul Convention, it is appropriate to maintain the references to the ATA Convention.

(3)

In the framework of the outward processing procedure, Commission Regulation (EEC) No 2454/93 (5) has, since 2001, permitted partial relief from import duty after outward processing to be calculated on the basis of the costs of the processing operation, in accordance with the ‘value-added method’. However, this method is not allowed if the temporary export goods which are not of Community origin have been released for free circulation at a zero duty rate. Those restrictive conditions for goods which are not of Community origin should be modified in order to promote the use of the value-added method.

(4)

However, in order to avoid an abuse of the system it is desirable to provide that this method of duty relief may be refused if it is established that the sole object of the release for free circulation of the temporary export goods had been to benefit from this relief.

(5)

The identity and nationality of means of transport at departure is regarded as mandatory information that has to be entered in box 18 of a transit declaration. At container terminals that have high levels of traffic it may occur that the details of the road means of transport to be used are unknown at the time when the transit formalities are carried out. Nevertheless, the identification of the container in which the goods subject to transit declaration will be carried is available and is already indicated in box 31 of the transit declaration. Given that the goods can be controlled on this basis, it is appropriate to allow box 18 of the transit declaration to be left blank, provided that it can be ensured that the proper details will be subsequently entered in the relevant box.

(6)

Annex 37c and Annex 38 to Regulation (EEC) No 2454/93 both contain lists of packaging codes based on Annex V to Recommendation No 21 of the United Nations Economic Commission for Europe, Rev. 1, of August 1994, hereinafter ‘the UN/ECE Recommendation’. Annex V to the UN/ECE Recommendation, which contains the list of codes, has been revised several times since its introduction in order to adapt it to practice in commerce and transport, the last time being in May 2002 (Revision 4). To enable traders to use the most widely accepted standard and thus to harmonise commercial and administrative practice within the Community as far as possible, it is necessary to provide that the packaging codes used in customs declarations are to reflect the latest version of Annex V to the UN/ECE Recommendation.

(7)

In the interests of clarity and rationality, the list of packaging codes should be published solely in Annex 38, to which reference should be made when the list is mentioned in other customs legislation.

(8)

The packaging codes are closely linked to the provisions applicable to transit operations as referred to in Articles 367 to 371 and to the new rules on the single administrative document, or form part of them. The new provisions must therefore be applicable for all customs procedures.

(9)

A list of the numerical codes used in connection with the transit guarantee, for use on the single administrative document forms, was established by Regulation (EEC) No 2454/93. It is necessary to complete that list, in order to take into account all the situations relating to the guarantee waivers.

(10)

As a consequence of the modification of the numerical codes of the transit guarantees, it is also necessary to adapt the corresponding data concerning the New Computerised Transit System.

(11)

Given that the Convention of 20 May 1987 on a common transit procedure provides that the numerical codes of the transit guarantees are to apply from 1 May 2004, the new codes should apply with effect from that date.

(12)

In view of the foregoing, Annexes 37 and 38 to Regulation (EEC) No 2454/93, as amended by Regulation (EC) No 2286/2003, should be amended. It is necessary, however, to make similar amendments also to Annex 37 to Regulation (EEC) No 2454/93, as amended by Commission Regulation (EC) No 444/2002 (6), and Annex 38 to Regulation (EEC) No 2454/93, as amended by Commission Regulation (EC) No 881/2003 (7), since they both remain in force until 1 January 2006.

(13)

Article 531 of Regulation (EEC) No 2454/93 defines the usual forms of handling which are allowed under the customs warehousing procedure. The framework of the permitted activities is established by Article 109(1) of Regulation (EEC) No 2913/92. The usual forms of handling which non-Community goods may undergo are exhaustively listed in Annex 72 to Regulation (EEC) No 2454/93. However, the restrictive scope of this Annex has led to certain problems in practice. Therefore, it is desirable to provide for more flexibility.

(14)

Some endorsements on customs documents expressed in the language of certain new Member States are not consistent with the terminology relating to customs matters already used in the languages concerned and adjustments are therefore necessary.

(15)

Since the 2003 Act of Accession took effect on 1 May 2004, those endorsements should be applicable on the same date.

(16)

Regulation (EEC) No 2454/93 should therefore be amended accordingly.

(17)

The measures provided for in this Regulation are in accordance with the opinion of the Customs Code Committee,

HAS ADOPTED THIS REGULATION:

Article 1

Regulation (EEC) No 2454/93 is amended as follows:

1.

in the third paragraph of Article 62, the 20th indent is replaced by the following:

‘—

Vyhotovené dodatočne’;

2.

in Article 113(3), the 20th indent is replaced by the following:

‘—

VYHOTOVENÉ DODATOČNE’;

3.

in Article 314c(3), the 20th indent is replaced by the following:

‘—

Vyhotovené dodatočne’;

4.

in Article 324d(2), the 20th indent is replaced by the following:

‘—

Oslobodenie od podpisu’;

5.

in the third subparagraph of Article 357(4), the 20th indent is replaced by the following:

‘—

Oslobodenie’;

6.

in the second subparagraph of Article 361(4), the 20th indent is replaced by the following:

‘—

Nezrovnalosti: úrad, ktorému bol tovar dodaný (názov a krajina)’;

7.

in Article 387(2), the 20th indent is replaced by the following:

‘—

Oslobodenie od predpísanej trasy’;

8.

in Article 403(2), the 20th indent is replaced by the following:

‘—

Oslobodenie od podpisu’;

9.

in Article 451(1), ‘/Istanbul Convention’ is inserted after ‘ATA Convention’;

10.

the following Articles 454a, 454b and 454c are inserted:

‘Article 454a

1.   Following an application by the consignee, the customs authorities may grant him the status of authorised consignee, thereby authorising him to receive at his premises or at any other specified place goods transported under the TIR procedure.

2.   The authorisation referred to in paragraph 1 shall be granted only to persons who:

(a)

are established in the Community;

(b)

regularly receive goods that have been entered for the TIR procedure, or whose customs authorities know that they can meet the obligations under that procedure;

(c)

have not committed any serious or repeated offences against customs or tax legislation.

Article 373(2) shall apply mutatis mutandis.

The authorisation shall apply solely in the Member State where the authorisation was granted.

The authorisation shall apply only to TIR operations that have as the final place of unloading the premises specified in the authorisation.

3.   Articles 374 and 375, Article 376(1) and (2), and Articles 377 and 378 shall apply mutatis mutandis to the procedure relating to the application referred to in paragraph 1.

4.   Article 407 shall apply mutatis mutandis with respect to the procedure laid down in the authorisation referred to in paragraph 1.

Article 454b

1.   In respect of goods arriving at his premises or at the place specified in the authorisation referred to in Article 454a, the authorised consignee shall comply with the following obligations, in accordance with the procedure laid down in the authorisation:

(a)

inform the customs authorities at the office of destination of the arrival of the goods;

(b)

immediately inform the customs authorities at the office of destination of any broken seals, and of any other irregularities such as excess quantities, deficits, or substitutions;

(c)

without delay, enter the results of the unloading into his records;

(d)

without delay, present to the customs authorities at the office of destination an advice indicating the particulars and condition of any seals affixed and the date of the entry into the records.

2.   The authorised consignee shall ensure that the TIR Carnet is presented, without delay, to the customs authorities at the office of destination.

3.   The customs authorities at the office of destination shall make the necessary endorsements on the TIR Carnet and, in accordance with the procedure laid down in the authorisation, shall ensure that the TIR Carnet is returned to the TIR carnet holder or to the person acting on his behalf.

4.   The date of termination of the TIR operation shall be the date of the entry into the records referred to in point (c) of paragraph 1. However, in the cases referred to in point (b) of paragraph 1, the date of termination of the TIR operation shall be the date of the endorsement of the TIR Carnet.

5.   At the request of the TIR carnet holder, the authorised consignee shall issue a receipt, the form of which shall correspond to a copy of the advice referred to in point (d) of paragraph 1. The receipt shall not be used as proof of the termination of the TIR operation within the meaning of Article 454c(2).

Article 454c

1.   The TIR carnet holder shall have fulfilled his obligations under point (o) of Article 1 of the TIR Convention when the TIR carnet together with the road vehicle, the combination of vehicles or the container and the goods have been delivered intact to the authorised consignee at his premises or at the place specified in the authorisation.

2.   The termination of the TIR operation, within the meaning of point (d) of Article 1 of the TIR Convention, shall have occurred when the requirements of Article 454b(1) and (2) have been met.’;

11.

in Article 457c(1), the words ‘or the Istanbul Convention’ are inserted after ‘ATA Convention’;

12.

Article 457d is amended as follows:

(a)

in paragraph 1, ‘or in Article 8(4) of Annex A to the Istanbul Convention’ is added;

(b)

in paragraph 2, ‘or in Article 9(1)(a) and (b) of Annex A to the Istanbul Convention’ is added;

(c)

in point (c) of paragraph 3, ‘or in Article 10 of Annex A to the Istanbul Convention’ is added;

13.

in Article 459(1), ‘or the Istanbul Convention’ is inserted after ‘ATA Convention’;

14.

Article 461 is amended as follows:

(a)

in the first sentence of the second subparagraph of paragraph 2, ‘or of the Istanbul Convention’ is added;

(b)

in the first sentence of paragraph 4, ‘or Article 9(1)(b) and (c) of Annex A to the Istanbul Convention’ is added.

15.

in Article 580(3), ‘Articles 454, 455’ is replaced by ‘Articles 457c, 457d’;

16.

in Article 591, the second subparagraph is replaced by the following:

‘Customs authorities shall refuse the calculation of partial relief from import duties under this provision if before the compensating products are released for free circulation it is established that the sole object of the release for free circulation at a zero duty rate of the temporary export goods, which are not of Community origin within the meaning of Title II, Chapter 2, Section 1, of the Code, was to benefit from partial relief under this provision.’;

17.

in Article 843(2), the 16th and 17th indents are replaced by the following:

‘—

A kilépés a Közösség területéről a … rendelet/irányelv/határozat szerinti korlátozás vagy teher megfizetésének kötelezettsége alá esik

Ħruġ mill-Komunita` suġġett għall-restrizzjonijiet jew ħlasijiet taħt Regola/Direttiva/Deċiżjoni Nru …’;

18.

in the fourth subparagraph of Article 912e(2), the 20th indent is replaced by the following:

‘—

(počet) vyhotovených výpisov – kópie priložené’;

19.

in the second subparagraph of Article 912f(1), the 16th and 20th indents are respectively replaced by the following:

‘—

Kiadva visszamenőleges hatállyal’

‘—

Vyhotovené dodatočne’;

20.

in point (c) of Article 912g(2), the 20th indent is replaced by the following:

‘Oslobodenie od podpisu – článok 912g nariadenia (EHS) č. 2454/93’;

21.

Annex 37, as amended by Regulation (EC) No 444/2002, is amended in accordance with Annex IA to this Regulation;

22.

Annex 37, in the version introduced by Regulation (EC) No 2286/2003, is amended in accordance with Annex IB to this Regulation;

23.

in Title II of Annex 37a, the particulars for box 31 are amended in accordance with point 1 of Annex II to this Regulation;

24.

in Title II of Annex 37a, the particulars for boxes 50 and 52 are amended in accordance with points 2, 3 and 4 of Annex II to this Regulation;

25.

Annex 37c is amended in accordance with Annex III to this Regulation;

26.

in Annex 38, as amended by Regulation (EC) No 881/2003, a text for box 31 is inserted in accordance with point A(1) of Annex IV to this Regulation;

27.

in Title II of Annex 38, in the version introduced by Regulation (EC) No 2286/2003, the text for box 31 is amended in accordance with point B(1) of Annex IV to this Regulation;

28.

in Annex 38, as amended by Regulation (EC) No 881/2003, the text of the applicable codes for box 52 is amended in accordance with point A(2) of Annex IV to this Regulation;

29.

in Title II of Annex 38, in the version introduced by Regulation (EC) No 2286/2003, the text of the applicable codes for box 52 is amended in accordance with point B(2) of Annex IV to this Regulation;

30.

in point 2.2 of Annex 47a, the 20th indent is replaced by the following:

‘ZÁKAZ CELKOVEJ ZÁRUKY’;

31.

Annex 59 is replaced by the text set out in Annex V to this Regulation;

32.

in the general remarks relating to Heading 16, in the ‘Provisions governing the information to be entered on the taxation form’ in Annex 60, ‘/Article 8 of Annex A to the Istanbul Convention’ is inserted after ‘ATA Convention’;

33.

Annex 61 is replaced by the text set out in Annex VI to this Regulation;

34.

Annex 72 is amended in accordance with Annex VII to this Regulation.

Article 2

1.   This Regulation shall enter into force on the third day following its publication in the Official Journal of the European Union.

2.   Points 1 to 8, 17 to 20, 24, 28 and 30 of Article 1 shall apply with effect from 1 May 2004.

3.   Points 9 to 15, 31, 32 and 33 of Article 1 shall apply with effect from 1 October 2005.

4.   Points 23, 25 and 26 of Article 1 shall apply with effect from 1 July 2005.

5.   Points 22, 27 and 29 of Article 1 shall apply with effect from 1 January 2006. However, the Member States may apply those points before that date. In such cases, the Member States shall notify the Commission of the date of application. The Commission shall publish this information.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 10 June 2005.

For the Commission

László KOVÁCS

Member of the Commission


(1)  OJ L 302, 19.10.1992, p. 1. Regulation as last amended by the 2003 Act of Accession.

(2)  OJ L 252, 14.9.1978, p. 1.

(3)  OJ L 31, 2.2.1983, p. 13.

(4)  OJ L 130, 27.5.1993, p. 1.

(5)  OJ L 253, 11.10.1993, p. 1. Regulation as last amended by Regulation (EC) No 2286/2003 (OJ L 343, 31.12.2003, p. 1).

(6)  OJ L 68, 12.3.2002, p. 11.

(7)  OJ L 134, 29.5.2003, p. 1.


ANNEX I

A.

In Section A of Title II of Annex 37 to Regulation (EEC) No 2454/93, as amended by Regulation (EC) 444/2002, the following paragraph is added to the particulars concerning box 18:

‘However, in respect of transit operations where goods are carried in containers that are to be transported by road vehicles, the customs authorities may authorise the principal to leave this box blank where the logistical pattern at the point of departure may prevent the identity and nationality of the means of transport from being provided at the time of establishment of the transit declaration and where the customs authorities can ensure that the required information concerning the means of transport will be subsequently entered in box 55.’

B.

In Section B of Title I of Annex 37 to Regulation (EEC) No 2454/93, in the version introduced by Regulation (EC) No 2286/2003, the following footnote [24] is inserted for box 18 (identity) and 18 (nationality) in column F of the table:

‘[24]

Where goods are carried in containers that are to be transported by road vehicles, the customs authorities may authorise the principal to leave this box blank where the logistical pattern at the point of departure may prevent the identity and nationality of the means of transport from being provided at the time of establishment of the transit declaration and where the customs authorities can ensure that the required information concerning the means of transport will be subsequently entered in box 55.’


ANNEX II

In Title II of Annex 37a to Regulation (EEC) No 2454/93, Section B is amended as follows:

1.

For the data group ‘PACKAGES’, the wording under ‘Kind of packages’ is replaced by the following:

‘Kind of packages (box 31)

Type/Length: an .. 2

The packaging codes listed under Box 31 of Annex 38 are used.’

2.

For the data group ‘TRADER principal’, the explanatory note concerning the attribute ‘Identification number (TIN) … (box 50)’ is replaced by the following:

‘Type/Length: an ..17

The attribute shall be used where the data group “CONTROL RESULT” contains the code A3 or where the attribute “GRN” is used.’

3.

For the data group ‘GUARANTEE’, the Type/Length of the attribute ‘Guarantee type (box 52)’ is replaced by the following:

‘Type/Length: an ..1’;

4.

For the data group ‘GUARANTEE REFERENCE’, the Type/Length of the attribute ‘GRN (box 52)’ is replaced by the following:

‘Type/Length: an ..24’.


ANNEX III

In Annex 37c to Regulation (EEC) No 2454/93, point 5, ‘Package code’, is deleted.


ANNEX IV

A.

Annex 38 to Regulation (EEC) No 2454/93, as amended by Regulation (EC) No 881/2003, is amended as follows:

1.

The following text is inserted for box 31:

‘Box 31: Packages and description of goods; Marks and numbers — Container No(s) — Number and kind

Kind of packages

Use the following codes.

(UN/ECE Recommendation No 21/REV. 4, May 2002)

PACKAGING CODES

Aerosol

AE

Ampoule, non-protected

AM

Ampoule, protected

AP

Atomizer

AT

Bag

BG

Bag, flexible container

FX

Bag, large

ZB

Bag, multiply

MB

Bag, paper

5M

Bag, paper, multi-wall

XJ

Bag, paper, multi-wall, water resistant

XK

Bag, plastic

EC

Bag, plastics film

XD

Bag, super bulk

43

Bag, textile

5L

Bag, textile, sift proof

XG

Bag, textile, water resistant

XH

Bag, textile, without inner coat/liner

XF

Bag, woven plastic

5H

Bag, woven plastic, sift proof

XB

Bag, woven plastic, water resistant

XC

Bag, woven plastic, without inner coat/liner

XA

Bale, compressed

BL

Bale, non-compressed

BN

Balloon, non-protected

BF

Balloon, protected

BP

Bar

BR

Barrel

BA

Barrel, wooden

2C

Barrel, wooden, bung type

QH

Barrel, wooden, removable head

QJ

Bars, in bundle/bunch/truss

BZ

Basin

BM

Basket

BK

Basket, with handle, cardboard

HC

Basket, with handle, plastic

HA

Basket, with handle, wooden

HB

Bin

BI

Board

BD

Board, in bundle/bunch/truss

BY

Bobbin

BB

Bolt

BT

Bottle, gas

GB

Bottle, non-protected, bulbous

BS

Bottle, non-protected, cylindrical

BO

Bottle, protected bulbous

BV

Bottle, protected cylindrical

BQ

Bottlecrate/bottlerack

BC

Box

BX

Box, aluminium

4B

Box, Commonwealth Handling Equipment Pool (CHEP), Eurobox

DH

Box, fibreboard

4G

Box, for liquids

BW

Box, natural wood

4C

Box, plastic

4H

Box, plastic, expanded

QR

Box, plastic, solid

QS

Box, plywood

4D

Box, reconstituted wood

4F

Box, steel

4A

Box, wooden, natural wood, ordinary

QP

Box, wooden, natural wood, with sift proof walls

QQ

Bucket

BJ

Bulk, gas (at 1 031 mbar and 15 °C)

VG

Bulk, liquefied gas (at abnormal temperature/pressure)

VQ

Bulk, liquid

VL

Bulk, solid, fine particles (powders)

VY

Bulk, solid, granular particles (grains)

VR

Bulk, solid, large particles (nodules)

VO

Bunch

BH

Bundle

BE

Butt

BU

Cage

CG

Cage, Commonwealth Handling Equipment Pool (CHEP)

DG

Cage, roll

CW

Can, cylindrical

CX

Can, rectangular

CA

Can, with handle and spout

CD

Canister

CI

Canvas

CZ

Capsule

AV

Carboy, non-protected

CO

Carboy, protected

CP

Card

CM

Carton

CT

Cartridge

CQ

Case

CS

Case, isothermic

EI

Case, skeleton

SK

Case, steel

SS

Case, with pallet base

ED

Case, with pallet base, cardboard

EF

Case, with pallet base, metal

EH

Case, with pallet base, plastic

EG

Case, with pallet base, wooden

EE

Cask

CK

Chest

CH

Churn

CC

Clamshell

AI

Coffer

CF

Coffin

CJ

Coil

CL

Composite packaging, glass receptacle

6P

Composite packaging, glass receptacle in aluminium crate

YR

Composite packaging, glass receptacle in aluminium drum

YQ

Composite packaging, glass receptacle in expandable plastic pack

YY

Composite packaging, glass receptacle in fibre drum

YW

Composite packaging, glass receptacle in fibreboard box

YX

Composite packaging, glass receptacle in plywood drum

YT

Composite packaging, glass receptacle in solid plastic pack

YZ

Composite packaging, glass receptacle in steel crate box

YP

Composite packaging, glass receptacle in steel drum

YN

Composite packaging, glass receptacle in wickerwork hamper

YV

Composite packaging, glass receptacle in wooden box

YS

Composite packaging, plastic receptacle

6H

Composite packaging, plastic receptacle in aluminium crate

YD

Composite packaging, plastic receptacle in aluminium drum

YC

Composite packaging, plastic receptacle in fibre drum

YJ

Composite packaging, plastic receptacle in fibreboard box

YK

Composite packaging, plastic receptacle in plastic drum

YL

Composite packaging, plastic receptacle in plywood box

YH

Composite packaging, plastic receptacle in plywood drum

YG

Composite packaging, plastic receptacle in solid plastic box

YM

Composite packaging, plastic receptacle in steel crate box

YB

Composite packaging, plastic receptacle in steel drum

YA

Composite packaging, plastic receptacle in wooden box

YF

Cone

AJ

Container, not otherwise specified as transport equipment

CN

Cover

CV

Crate

CR

Crate, beer

CB

Crate, bulk, cardboard

DK

Crate, bulk, plastic

DL

Crate, bulk, wooden

DM

Crate, framed

FD

Crate, fruit

FC

Crate, milk

MC

Crate, multiple layer, cardboard

DC

Crate, multiple layer, plastic

DA

Crate, multiple layer, wooden

DB

Crate, shallow

SC

Creel

CE

Cup

CU

Cylinder

CY

Demijohn, non-protected

DJ

Demijohn, protected

DP

Dispenser

DN

Drum

DR

Drum, aluminium

1B

Drum, aluminium, non-removable head

QC

Drum, aluminium, removable head

QD

Drum, fibre

1G

Drum, iron

DI

Drum, plastic

IH

Drum, plastic, non-removable head

QF

Drum, plastic, removable head

QG

Drum, plywood

1D

Drum, steel

1A

Drum, steel, non-removable head

QA

Drum, steel, removable head

QB

Drum, wooden

1W

Envelope

EN

Envelope, steel

SV

Filmpack

FP

Firkin

FI

Flask

FL

Foodtainer

FT

Footlocker

FO

Frame

FR

Girder

GI

Girders, in bundle/bunch/truss

GZ

Hamper

HR

Hogshead

HG

Ingot

IN

Ingots, in bundle/bunch/truss

IZ

Intermediate bulk container

WA

Intermediate bulk container, aluminium

WD

Intermediate bulk container, aluminium, liquid

WL

Intermediate bulk container, aluminium, pressurised > 10 kPa

WH

Intermediate bulk container, composite

ZS

Intermediate bulk container, composite, flexible plastic, liquids

ZR

Intermediate bulk container, composite, flexible plastic, pressurised

ZP

Intermediate bulk container, composite, flexible plastic, solids

ZM

Intermediate bulk container, composite, rigid plastic, liquids

ZQ

Intermediate bulk container, composite, rigid plastic, pressurised

ZN

Intermediate bulk container, composite, rigid plastic, solids

ZL

Intermediate bulk container, fibreboard

ZT

Intermediate bulk container, flexible

ZU

Intermediate bulk container, metal

WF

Intermediate bulk container, metal, liquid

WM

Intermediate bulk container, metal, other than steel

ZV

Intermediate bulk container, metal, pressure 10 kPa

WJ

Intermediate bulk container, natural wood

ZW

Intermediate bulk container, natural wood, with inner liner

WU

Intermediate bulk container, paper, multi-wall

ZA

Intermediate bulk container, paper, multi-wall, water resistant

ZC

Intermediate bulk container, plastic film

WS

Intermediate bulk container, plywood

ZX

Intermediate bulk container, plywood, with inner liner

WY

Intermediate bulk container, reconstituted wood

ZY

Intermediate bulk container, reconstituted wood, with inner liner

WZ

Intermediate bulk container, rigid plastic

AA

Intermediate bulk container, rigid plastic, freestanding, liquids

ZK

Intermediate bulk container, rigid plastic, freestanding, pressurised

ZH

Intermediate bulk container, rigid plastic, freestanding, solids

ZF

Intermediate bulk container, rigid plastic, with structural equipment, solids

ZD

Intermediate bulk container, rigid plastic, with structural equipment, liquids

ZJ

Intermediate bulk container, rigid plastic, with structural equipment, pressurised

ZG

Intermediate bulk container, steel

WC

Intermediate bulk container, steel, liquid

WK

Intermediate bulk container, steel, pressurised > 10 kPa

WG

Intermediate bulk container, textile without coat/liner

WT

Intermediate bulk container, textile, coated

WV

Intermediate bulk container, textile, coated and liner

WX

Intermediate bulk container, textile, with liner

WW

Intermediate bulk container, woven plastic, coated

WP

Intermediate bulk container, woven plastic, coated and liner

WR

Intermediate bulk container, woven plastic, with liner

WQ

Intermediate bulk container, woven plastic, without coat/liner

WN

Jar

JR

Jerry-can, cylindrical

JY

Jerry-can, plastic

3H

Jerry-can, plastic, non-removable head

QM

Jerry-can, plastic, removable head

QN

Jerry-can, rectangular

JC

Jerry-can, steel

3A

Jerry-can, steel, non-removable head

QK

Jerry-can, steel, removable head

QL

Jug

JG

Jute bag

JT

Keg

KG

Lift van

LV

Log

LG

Logs, in bundle/bunch/truss

LZ

Lot

LT

Mat

MT

Matchbox

MX

Mutually defined

ZZ

Nest

NS

Net

NT

Net, tube, plastic

NU

Net, tube, textile

NV

Not available

NA

Package

PK

Package, cardboard, with bottle grip-holes

IK

Package, display, cardboard

IB

Package, display, metal

ID

Package, display, plastic

IC

Package, display, wooden

IA

Package, flow

IF

Package, paper-wrapped

IG

Package, show

IE

Packet

PA

Pail

PL

Pallet

PX

Pallet, 100 cm × 110 cm

AH

Pallet, box

PB

Pallet, modular, collars 80 cm × 100 cm

PD

Pallet, modular, collars 80 cm × 120 cm

PE

Pallet, modular, collars 80 cm × 60 cm

AF

Pallet, shrink-wrapped

AG

Parcel

PC

Pen

PF

Pipe

PI

Pipes, in bundle/bunch/truss

PV

Pitcher

PH

Plank

PN

Planks, in bundle/bunch/truss

PZ

Plate

PG

Plates, in bundle/bunch/truss

PY

Pot

PT

Pouch

PO

Punnet

PJ

Rack

RK

Rack, clothing hanger

RJ

Receptacle, fibre

AB

Receptacle, glass

GR

Receptacle, metal

MR

Receptacle, paper

AC

Receptacle, plastic

PR

Receptacle, plastic-wrapped

MW

Receptacle, wooden

AD

Rednet

RT

Reel

RL

Ring

RG

Rod

RD

Rods, in bundle/bunch/truss

RZ

Roll

RO

Sachet

SH

Sack

SA

Sack, multi-wall

MS

Sea-chest

SE

Set

SX

Sheet

ST

Sheet, plastic wrapping

SP

Sheet metal

SM

Sheets, in bundle/bunch/truss

SZ

Shrink-wrapped

SW

Skid

SI

Slab

SB

Sleeve

SY

Slip-sheet

SL

Spindle

SD

Spool

SO

Suitcase

SU

Tank, cylindrical

TY

Tank, rectangular

TK

Tea-chest

TC

Tierce

TI

Tin

TN

Tray

PU

Tray, one layer no cover, cardboard

DV

Tray, one layer no cover, plastic

DS

Tray, one layer no cover, polystyrene

DU

Tray, one layer no cover, wooden

DT

Tray, two layers no cover, cardboard

DY

Tray, two layers no cover, plastic tray

DW

Tray, two layers no cover, wooden

DX

Trunk

TR

Truss

TS

Tub

TB

Tub, with lid

TL

Tube

TU

Tube, collapsible

TD

Tube, with nozzle

TV

Tubes, in bundle/bunch/truss

TZ

Tun

TO

Uncaged

UC

Unpacked or unpackaged

NE

Unpacked or unpackaged, multiple units

NG

Unpacked or unpackaged, single unit

NF

Vacuum-packed

VP

Vanpack

VK

Vat

VA

Vial

VI

Wicker bottle

WB’

2.

The list of applicable codes for box 52: Guarantee is replaced by the following:

Situation

Code

Other entries

‘For guarantee waiver (Articles 94(4) of the Code and 380(3) of this Regulation)

0

— guarantee waiver certificate number

For comprehensive guarantee

1

— comprehensive guarantee certificate number

— office of guarantee

For individual guarantee by a guarantor

2

— reference for the guarantee undertaking

— office of guarantee

For individual guarantee in cash

3

 

For individual guarantee in the form of vouchers

4

— individual guarantee voucher number

For guarantee waiver where secured amount does not exceed EUR 500 (Article 189(5) of the Code)

5

 

For guarantee not required (Article 95 of the Code)

6

 

For guarantee not required for certain public bodies

8

 

For individual guarantee of the type under point 3 of Annex 47a

9

— reference to the guarantee undertaking

— office of guarantee’

B.

in Annex 38 to Regulation (EEC) No 2454/93, in the version introduced by Regulation (EC) No 2286/2003, Title II is amended as follows:

1.

The text for box 31 is replaced by the text set out in point A(1) of this Annex;

2.

The list of applicable codes for box 52: Guarantee is replaced by the text set out in point A(2) of this Annex.


ANNEX V

‘ANNEX 59

MODEL OF THE INFORMATION MEMO REFERRED TO IN ARTICLE 459

Letter heading of the coordination office initiating the dispute

Addressee: coordinating office covering the offices of temporary importation, or other coordinating office

SUBJECT: ATA CARNET — SUBMISSION OF CLAIM

Be informed that a claim for payment of duties and taxes under the ATA Convention/the Istanbul Convention (1) was sent on … (2) to our guaranteeing association in respect of:

1.

ATA carnet No:

2.

Issued by the Chamber of Commerce of:

 

City:

 

Country:

3.

On behalf of:

 

Holder:

 

Address:

4.

Expiry date of carnet:

5.

Date set for re-exportation (3):

6.

Number of transit/import voucher (4):

7.

Date of endorsement of voucher:

Signature and stamp of the issuing coordinating office.


(1)  Article 7 of the ATA Convention, Brussels, 6 December 1961/Article 9 of Annex A to the Istanbul Convention, 26 June 1990.

(2)  Enter date of dispatch.

(3)  Details to be obtained from the undischarged transit or temporary admission voucher or, if no voucher is available, from the information available to the issuing coordinating office.

(4)  Delete whichever is not applicable.’


ANNEX VI

‘ANNEX 61

MODEL OF DISCHARGE

Letter heading of the coordinating office of the second Member State submitting the claim

Addressee: coordinating office of the first Member State submitting the original claim.

SUBJECT: ATA CARNET — DISCHARGE

Be informed that a claim for payment of duties and taxes under the ATA Convention/Istanbul Convention (1) was sent on … (2) to our guaranteeing association in respect of:

1.

ATA carnet No:

2.

Issued by the Chamber of Commerce of:

 

City:

 

Country:

3.

On behalf of:

 

Holder:

 

Address:

4.

Expiry date of the carnet:

5.

Date set for re-exportation (3):

6.

Number of transit/import voucher (4):

7.

Date of endorsement of voucher:

The present note discharges your responsibility in this file.

Signature and stamp of issuing coordinating office.


(1)  Article 7 of the ATA Convention, Brussels, 6 December 1961/Article 9 of Annex A to the Istanbul Convention, 26 June 1990.

(2)  Enter date of dispatch.

(3)  Details to be obtained from the undischarged transit or temporary admission voucher or, if no voucher is available, from the information available to the issuing coordinating office.

(4)  Delete whichever is not applicable.’


ANNEX VII

In Annex 72 to Regulation (EEC) No 2454/93, the following point is added:

‘19.

Any usual forms of handling, other than the abovementioned, intended to improve the appearance or marketable quality of the import goods or to prepare them for distribution or resale, provided that these operations do not change the nature or improve the performance of the original goods. Where costs for usual forms of handling have been incurred, such costs or the increase in value shall not be taken into account for the calculation of the import duty where satisfactory proof of these costs is provided by the declarant. However, the customs value, nature and origin of non-Community goods used in the operations shall be taken into account for the calculation of the import duties.’


Top