This document is an excerpt from the EUR-Lex website
Document 21976A0130(01)
ACP-EEC Convention of Lomé - Protocol No 1 concerning the definition of the concept of "originating products" and methods of administrative cooperation
ACP-EEC Convention of Lomé - Protocol No 1 concerning the definition of the concept of "originating products" and methods of administrative cooperation
ACP-EEC Convention of Lomé - Protocol No 1 concerning the definition of the concept of "originating products" and methods of administrative cooperation
/* Lomé 1 */
OJ L 25, 30.1.1976, p. 41–103
(DA, DE, EN, FR, IT, NL)
No longer in force, Date of end of validity: 29/02/1980
ACP-EEC Convention of Lomé - Protocol No 1 concerning the definition of the concept of "originating products" and methods of administrative cooperation /* Lomé 1 */
Official Journal L 025 , 30/01/1976 P. 0041
++++ PROTOCOL No 1 concerning the definition of the concept of " originating products " and methods of administrative co-operation TITLE 1 Definition of the concept of originating products Article 1 1 . For the purpose of implementing the Convention and without prejudice to paragraphs 3 and 4 , the following products shall be considered as products originating in an ACP State , under the condition that they were transported directly , within the meaning of Article 5 : ( a ) products wholly obtained in one or more ACP States , ( b ) products obtained in one or more ACP States in the manufacture of which products other than those referred to in ( a ) are used , provided that the said products have undergone sufficient working or processing within the meaning of Article 3 . 2 . For the purpose of implementing paragraph 1 , the ACP States are considered as being one territory . 3 . When products wholly obtained in the Community or in the countries and territories defined in Explanatory Note 9 undergo working or processing in one or more ACP States , they shall be considered as having been wholly produced in that or those ACP States , under the condition that the products were transported directly within the meaning of Article 5 . 4 . Working and processing carried out in the Community or in the " countries and territories " , shall be considered as having been carried out in one or more ACP States , when the final products undergo working or processing in one or more ACP States , under the condition that the products were transported directly within the meaning of Article 5 . 5 . For the purpose of implementing the previous paragraphs , and provided that all the conditions laid down in those paragraphs are fulfilled , the products obtained in one or more ACP States shall be considered as products originating in the ACP State where the last working or processing took place . For this purpose the working or processing listed in Article 3 ( 3 ) ( a ) , ( b ) , ( c ) and ( d ) shall not be considered as working or processing , nor shall a combination of such working or of such processing . 6 . The products in List C in Annex IV shall be temporarily excluded from the scope of this Protocol . Article 2 The following shall be considered as wholly obtained either in one or more ACP States , in the Community or in the " countries and territories " within the meaning of Article 1 ( 1 ) ( a ) and ( 3 ) : ( a ) mineral products extracted from their soil or from their seabed ; ( b ) vegetable products harvested therein ; ( c ) live animals born and raised therein ; ( d ) products from live animals raised therein ; ( e ) products obtained by hunting or fishing conducted therein ; ( f ) products of sea fishing and other products taken from the sea by their vessels ; ( g ) products made aboard their factory ships exclusively from products referred to in subparagraph ( f ) ; ( h ) used articles collected there fit only for the recovery of raw materials ; ( i ) waste and scrap resulting from manufacturing operations conducted therein ; ( j ) goods produced there exclusively from products specified in subparagraphs ( a ) to ( i ) . Article 3 1 . For the purpose of implementing Article 1 ( 1 ) ( b ) the following shall be considered as sufficient working or processing ; ( a ) working or processing as a result of which the goods obtained receive a classification under a tariff heading other than that covering each of the products worked or processed , except , however , working or processing specified in List A in Annex II , where the special provisions of that list apply ; ( b ) working or processing specified in List B in Annex III . " Sections " , " Chapters " and " tariff headings " shall mean the Sections . Chapters and headings in the Brussels Nomenclature for the Classification of Goods in Customs Tariffs . 2 . When , for a given product obtained , a percentage rule limits in List A and in List B the value of the materials and parts which can be used , the total value of these materials and parts , whether or not they have changed tariff heading in the course of the working , processing or assembly within the limits and under the conditions laid down in each of those two lists , may not exceed , in relation to the value of the product obtained , the value corresponding either to the common rate , if the rates are identical in both lists , or to the higher of the two if they are different . 3 . For the purpose of implementing Article 3 ( 1 ) ( a ) the following shall always be considered as insufficient working or processing to confer the status of originating products , whether or not there is a change of tariff heading ; ( a ) operations to ensure the preservation of merchandise in good condition during transport and storage ( ventilation , spreading out , drying , chilling , placing in salt , sulphur dioxide or other aqueous solutions , removal of damaged parts , and like operations ) . ( b ) simple operations consisting of removal of dust , sifting or screening , sorting , classifying , matching ( including the making-up of sets of articles ) , washing , painting , cutting up ; ( c ) ( i ) changes of packing and breaking up and assembly of consignments ; ( ii ) simple placing in bottles , flasks , bags , cases , boxes , fixing on cards or boards , etc . , and all other simple packing operations ; ( d ) affixing marks , labels or other like distinguishing signs on products or their packaging ; ( e ) simple mixing of products , whether or not of different kinds , where one or more components of the mixtures do not meet the conditions laid down in this Protocol to enable them to be considered as originating either in the Community , in an ACP State or in the " countries and territories " ; ( f ) simple assembly of parts of articles to constitute a complete article ; ( g ) a combination of two or more operations specified in subparagraphs ( a ) to ( f ) ; ( h ) slaughter of animals . Article 4 Where the Lists A and B referred to in Article 3 provide that goods obtained in an ACP State shall be considered as originating therein only if the value of the products worked or processed does not exceed a given percentage of the value of the goods obtained , the values to be taken into consideration for such percentage shall be : _ on the one hand , as regards products whose importation can be proved ; their customs value at the time of importation ; as regards products of undetermined origin ; the earliest ascertainable price paid for such products in the territory of the Contracting Party where manufacture takes place ; _ and on the other hand , the ex-works price of the goods obtained , less internal taxes refunded or refundable on exportation . Article 5 1 . For the purpose of implementing Article 1 ( 1 ) , ( 3 ) and ( 4 ) , originating products whose transport is effected without entering into territory other than that of the parties concerned are considered as transported directly form the ACP States to the Community or from the Community or the " countries and territories " to the ACP States . Originating goods constituting one single consignment may be transported through territory other than that of the Community or the ACP States or the " countries and territories " , with , should the occasion arise , transhipment or temporary warehousing in such territory , provided that the crossing of the latter territory is justified for geographical reasons or the needs of transport and that the products have not entered into commerce or been delivered for home use and have not undergone operations other than unloading , reloading or any operation designed to preserve them in good condition . Interruptions or changes in the method of transport due to force majeure or consequent upon conditions at sea shall not affect the application of the preferential treatment laid down in this Protocol , provided that the goods have not , during these interruptions or changes , entered into commerce or been delivered for home use and have not undergone any operations other than those designed to preserve them in good condition . 2 . Evidence that the conditions referred to in paragraph 1 have been fulfilled shall be supplied to the responsible customs authorities in the Community by the production of ; ( a ) a through bill of lading issued in the exporting beneficiary country covering the passage through the country of transit ; ( b ) or a certificate issued by the customs authorities of the country of transit : _ giving an exact description of the goods , _ stating the dates of unloading and reloading of the goods or of their embarkation or disembarkation , identifying the ships used . _ certifying the conditions under which the goods remained in the transit country . ( c ) or failing these , any substantiating documents . TITLE II Arrangements for administrative co-operation Article 6 1 . Evidence originating status , without the meaning of this Protocol , of products is given by a movement certificate EUR . 1 of which a specimen is given in Annex V to this Protocol . However , the evidence of originating status , within the meaning of this Protocol , of products which form the subject of postal consignments ( including parcels ) , provided that they consist only of originating products and that the value does not exceed 1 000 units of account per consignment , is given by a form EUR . 2 , of which a specimen is given in Annex VI to this Protocol . 2 . Without prejudice to Article 3 ( 3 ) , where , at the request of the person declaring the goods at the customs a dismantled or non-assembled article falling within Chapter 84 or 85 of the Brussels Nomenclature is imported by instalments on the conditions laid down by the competent authorities , it shall be considered to be a single article and a movement certificate may be submitted for the whole article upon importation of the first instalment . 3 . Accessories , spare parts and tools dispatched with a piece of equipment , machine , apparatus or vehicle which are part of the normal equipment and included in the price thereof or are not separately invoiced are regarded as one with the piece of equipment , machine , apparatus or vehicle in question . Article 7 1 . A movement certificate EUR . 1 shall be issued by the customs authorities of the exporting ACP State when the goods to which it relates are exported . It shall be made available to the exported as soon as actual exportation has been effected or ensured . 2 . In exceptional circumstances a movement certificate EUR . 1 may also be issued after exportation of the goods to which it relates if it was not issued at the time of exportation because of errors or involuntary omissions or special circumstances . In this case , the certificate shall bear a special reference to the conditions in which it was issued . 3 . A movement certificate EUR . 1 shall be issued only on application having been made in writing by the exporter . Such application shall be made on a form , of which a specimen is given in Annex V to this Protocol , which shall be completed in accordance with this Protocol . 4 . A movement certificate EUR . 1 may be issued only where it can serve as the documentary evidence required for the purpose of implementing the Convention . 5 . Applications for movement certificate EUR . 1 must be preserved for at least three years by the customs authorities of the exporting country . Article 8 1 . The movement certificate EUR . 1 shall be issued by the customs authorities of the exporting ACP State , if the goods can be considered " originating products " within the meaning of this Protocol . 2 . For the purpose of verifying whether the conditions stated in paragraph 1 have been met , the customs authorities shall have the rights to call for any documentary evidence or to carry out any check which they consider appropriate . 3 . It shall be the responsibility of the customs authorities of the exporting State to ensure that the forms referred to in Article 9 are duly completed . In particular , they shall check whether the space reserved for the description of the goods has been completed in such a manner as to exclude all possibility of fraudulent additions . To this end , the description of the goods must be indicated without leaving any blank lines . Where the space is not completely filled a horizontal line must be drawn below the last line of the description , the empty space being crossed through . 4 . The date of issue of the movement certificate must be indicated in the part of the certificate reserved for the customs authorities . Article 9 Movement certificates EUR . 1 shall be made out on the form of which a specimen is given in Annex V to this Protocol . This form shall be printed in one or more of the languages in which the Convention is drawn up . Certificates shall be made out in one of these languages and in accordance with the provisions of the domestic law of the exporting State ; if they are handwritten , they shall be completed in ink and in capital letters . Each certificate shall measure 210 by 297 mm , a tolerance of up to plus 8 mm or minus 5 mm in the length may be allowed . The paper used must be white-sized writing paper not containing mechanical pulp and weighing not less than 25 g / m2 . It shall have a printed green guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye . The exporting States may reserve the right to print the certificates themselves or may have them printed by approved printers . In the latter case , each certificate must include a reference to such approval . Each certificate must bear the name and address of the printer or a mark by which the printer can be identified . It shall also bear serial number , either printed or not , by which it can be identified . Article 10 1 . Under the responsibility of the exporter , he or his authorized representative shall request the issue of a movement certificate EUR . 1 . 2 . The exporter or his representative shall submit with his request any appropriate supporting document proving that the goods to be exported are such as to qualify for the issue of a movement certificate EUR . 1 . Article 11 1 . A movement certificate EUR . 1 must be submitted , within five months of the date of issue by the customs authorities of the exporting State , to the customs authorities of the importing State where the goods are entered . 2 . When the products enter territories other than those of the ACP States , the Community or the " countries and territories " , the time limit laid down in paragraph 1 for the submission of the certificate is extended to 10 months . Article 12 Movement certificates EUR . 1 shall be submitted to customs authorities in the importing State , in accordance with the procedures laid down by that State . The said authorities may require a translation of a certificate . They may also require the import declaration to be accompanied by a statement from the importer to the effect that the goods meet the conditions required for the implementation of the Convention . Article 13 1 . A movement certificate EUR . 1 which is submitted to the customs authorities of the importing State after the final date for presentation specified in Article 11 may be accepted for the purpose of applying preferential treatment , where the failure to submit the certificate by the final date set is due to reasons of force majeure or exceptional circumstances . 2 . In other cases of belated presentation , the customs authorities of the importing State may accept the certificates where the goods have been submitted to them before the said final date . Article 14 The discovery of slight discrepancies between the statements made in the movement certificate EUR . 1 and those made in the documents submitted to the customs office for the purpose of carrying out the formalities for importing the goods shall not ipso facto render the certificate null and void if it is duly established that the certificate does correspond to the goods submitted . Article 15 Form EUR . 2 , a specimen of which is given in Annex VI , shall be completed by the exporter . It shall be made out in one of the languages in which the Convention is drawn up and in accordance with the provisions of the domestic law of the exporting State . If it is handwritten it must be completed in ink and in capital letters . Form EUR . 2 , shall be composed of two parts , each part being 210 by 148 mm . The paper used shall be white-sized writing paper not containing mechanical pulp and weighing not less than 64 g / m2 . The exporting States may reserve the right to print the forms themselves or may have them printed by printers they have approved . In the latter case each form must include a reference to such approval . In addition , each part must bear the distinctive sign attributed to the approved printer and a serial number , either printed or not , by which it can be identified . A form EUR . 2 , shall be completed for each postal consignment . After completing and signing the two parts of the form , the exporter shall , in the case of consignments by parcel post , attach the two parts to the dispatch note . In the case of consignments by letter post , the exporter shall attach Part 1 firmly to the consignment and insert Part 2 inside it . These provisions do not exempt exporters from complying with any other formalities required by customs or postal regulations . Article 16 1 . Goods sent as small packages to private persons or forming part of travellers' personal luggage shall be admitted as originating products without requiring the production of a movement certificate EUR . 1 or the completion of a form EUR . 2 , provided that such goods are not imported by way of trade and have been declared as meeting the conditions required for the application of these provisions , and where there is no doubt as to the veracity of such declaration . 2 . Importations which are occassional and consist solely of goods for the personal use of the recipients or travellers or their families shall not be considered as importations by way of trade if it is evident from the nature and quantity of the goods that no commercial purpose is in view . Furthermore , the total value of these goods must not exceed 60 units of account in the case of small packages or 200 units of account in the case of the contents of travellers' personal luggage . Article 17 1 . Goods sent from an ACP State for exhibition in a country other than an ACP State , a Member State or one " country or territory " and sold after the exhibition for importation into the Community shall benefit on importation from the provisions of the Convention on condition that the goods meet the requirements of this Protocol entitling them to be recognized as originating in an ACP State and provided that it is shown to the satisfaction of the customs authorities that : ( a ) an exporter has consigned these goods from an ACP State to the country in which the exhibition is held and has exhibited them there ; ( b ) the goods have been sold or otherwise disposed of by that exporter to someone in the Community ; ( c ) the goods have been consigned during the exhibition or immediately thereafter to the Community in the state in which they were sent for exhibition ; ( d ) the goods have not , since they were consigned for exhibition , been used for any purpose other than demonstration at the exhibition . 2 . A movement certificate EUR . 1 must be produced to the customs authorities in the normal manner . The name and address of the exhibition must be indicated thereon . Where necessary , additional documentary evidence of the nature of the goods and the conditions under which they have been exhibited may be required . 3 . Paragraph 1 shall apply to any trade , industrial , agricultural or crafts exhibition , fair or similar public show or display which is not organized for private purposes in shops or business premises with a view to the sale of foreign goods and during which the goods remain under customs control . Article 18 1 . When a certificate is issued within the meaning of Article 7 ( 2 ) of this Protocol after the goods to which it relates have actually been exported , the exporter must in the application referred to in Article 7 ( 3 ) of this Protocol : _ indicate the place and date of exportation of the goods to which the certificate relates ; _ certify that no movement certificate EUR . 1 was issued at the time of exportation of the goods in question , and state the reasons . 2 . The customs authorities may issue a movement certificate EUR . 1 restrospectively only after verifying that the information supplied in the exporter's application agrees with that in the corresponding file . Certificates issued retrospectively must be endorsed with one of the following phrases : " NACHTRAAGLICH AUSGESTELLT " , " DELIVRE A POSTERIORI " , " RILASCIATO A POSTERIORI " , " AFGEGEVEN A POSTERIORI " , " ISSUED RETROSPECTIVELY " , " UDSTEDT EFTERFOELGENDE " . Article 19 In the event of the theft , loss or destruction of a movement certificate EUR . 1 , the exporter may apply to the customs authorities which issued it for a duplicate made out on the basis of the export documents in their possession . The duplicate issued in this way must be endorsed with one of the following words : " DUPLIKAT " , " DUPLICATA " , " DUPLICATO " , " DUPLICAAT " , " DUPLICATE " . Article 20 1 . When paragraph 2 , 3 and 4 of Article 1 are applied , for the issue of a movement certificate EUR . 1 , the competent customs office in the ACP State requested to issue the certificate for products in the manufacture of which products coming from other ACP States , the Community or " countries or territories " are used , shall take into consideration the declaration , of which a specimen is given in Annex VII , given by the exporter in the State , country or territory from which it came , either on the commercial invoice applicable to these products , or on a supporting document to that invoice . 2 . The submission of the information certificate , issued under the conditions set out in Article 21 and of which a specimen is given in Annex VIII , may however be requested of the exporter by the customs office concerned , either for checking the authenticity and accuracy of information given on the declaration provided for in paragraph 1 , or for obtaining additional information . Article 21 The information certificate concerning the products taken into use shall be issued at the request of the exporter of these products , either in the circumstances envisaged in Article 20 ( 2 ) , or at the initiative of this exporter , by the competent customs office in the State , country or territory from which these goods were exported . It shall be made out in duplicate . One copy shall be given to the exporter who has requested it , who shall send it either to the exporter of the final products or to the customs office where the issue of the movement certificate EUR . 1 for these products has been requested . The second copy shall be preserved by the office which has issued it for at least three years . Article 22 The ACP States shall take all necessary step to ensure that goods traded under cover of a movement certificate EUR . 1 , and which in the course of transport use a free zone situated in their territory , are no replaced by other goods and that they do not undergo handling other than normal operations designed to prevent their deterioration . Article 23 In order to ensure the proper application of this Title , the Member States , the " countries and territories " and the ACP States shall assist each other , through their respective customs administrations , in checking the authenticity of movement certificates UER . 1 and the accuracy of the information concerning the actual origin of the products concerned and the declarations by exporters on forms EUR . 2 and the authenticity and accuracy of the information certificates envisaged in Article 20 . Article 24 Penalties shall be imposed on any person who draws up or causes to be drawn up either a form EUR . 2 or a document which contains incorrect particulars for the purpose of obtaining a movement certificate EUR . 1 enabling goods to be accepted as eligible for preferential treatment . Article 25 1 . Subsequent verifications of movement certificates EUR . 1 and of forms EUR . 2 shall be carried out at random or whenever the customs authorities of the importing State have reasonable doubt as to the authenticity of the document or the accuracy of the information regarding the true origin of the goods in question . 2 . For the purpose of implementing paragraph 1 , the customs authorities of the importing State shall return the movement certificate EUR . 1 or Part 2 of form EUR . 2 , or a photocopy thereof , to the customs authorities of the exporting State , giving , where appropriate , the reasons of form or substance for an inquiry . The invoice , if it has been submitted , or a copy thereof shall be attached to Part 2 of form EUR . 2 and the customs authorities shall forward any information that has been obtained suggesting that the particulars given on the said certificate or the said form are inaccurate . If the customs authorities of the importing State decide to suspend execution of Title 1 of the Convention while awaiting the results of the verification , they shall offer to release the goods to the importer subject to any precautionary measures judged necessary . 3 . The customs authorities of the importing State shall be informed of the results of the verification within three months . These results must be such as to make it possible to determine whether the disputed movement certificate EUR . 1 or form EUR . 2 applies to the goods actually exported , and whether these goods can , in fact , qualify for the application of the preferential arrangements . When such disputes cannot be settled between the customs authorities of the importing State and those of the exporting State , or when they raise a question as to the interpretation of this Protocol , they shall be submitted to the Customs Co-operation Committee provided for in Article 28 . In all cases the settlement of disputes between the importer and the customs authorities of the importing State shall be under the legislation of the said State . Article 26 The subsequent verification of the information certificate referred to in Article 20 shall carried out in the circumstances envisaged in Article 25 following a similar procedure to that envisaged in that Article . Article 27 The Council of Ministers shall examine annually the application of the provisions of this Protocol and their economic effects with a view to making any necessary changes . This examination may be carried out at more frequent intervals at the request either of the Community or the ACP States , notably when the development of existing industries or the creation of new industries necessitates derogations from this Protocol . In these cases , the ACP States concerned shall notify the community of the particulars of the case and the reasons the need for such derogation . The Council of Ministers , on the basis of a report by the Committee referred to in Article 28 , shall , immediately after , arrange for the examination of the application ( s ) and take every step to ensure that a decision is reached as early as possible , at any rate not later than six months after receipt of the application ( s ) . Article 28 1 . A Customs Co-operation Committee is set up , charged with carrying out administrative co-operation with a view to the correct and uniform application of this Protocol and with carrying out any other task in the customs field which may be entrusted to it , notably in preparing the decisions of the Council of Ministers for the implementation of Article 27 . 2 . The Committee shall be composed on the one hand of the customs experts of the Member States and of officials of the departments of the Commission of the European Communities who are responsible for customs questions , and on the other hand of customs experts representing the ACP States , and / or officials of regional groupings of the ACP States who are responsible for customs questions . Article 29 The Annexes to this Protocol shall form an integral part thereof . Article 30 The Community and the ACP States shall each take the steps necessary to implement this Protocol . Article 31 1 . For goods which conform to Title I and which , at the time of the entry into force of the Convention are either being transported or being held in the Community or in an ACP State in temporary storage , in bonded warehouses or in free zones , the proof of originating status within the meaning of this Protocol is given by the submission , within four months of that date , to the customs authorities of the importing State of : ( a ) a movement certificate EUR . 1 issued retrospectively by the customs authorities of the exporting State , or ( b ) a certificate of origin issued by the competent authorities in that State , or ( c ) a movement certificate of the model previously used in the context of preferential trade between , on the one hand , the Community and the African and Malagasy States or the Republic of Tanzania , the Republic of Uganda and the Republic of Kenya , on the other hand , or ( d ) for goods destined for importation into Ireland or the United Kingdom of Great Britain and Northern Ireland , a certificate of the type previously used in the context of Commonwealth preferences . 2 . The movement certificates mentioned in paragraph 1 ( c ) may continued to be used , under the conditions laid down in this Protocol , until 31 December 1975 . 3 . Until 1 July 1977 , Article 1 ( 3 ) and ( 4 ) , shall not be applicable in respect of products obtained in one or more ACP States from : _ products of one or more Member States of the Community as originally constituted and exported to one or more new Member States ; or _ products of one or more new Member States and exported to one or more Member States of the Community as originally constituted ; where the products referred to in the two above indents have been the subject only of working or processing within the meaning of Article 3 ( 3 ) . ANNEX I EXPLANATORY NOTES Notes 1 _ Articles 1 and 2 The terms " one or more ACP States " , " the Community " and " countries and territories " shall also cover their territorial waters . Vessels operating on the high seas , including factory ships , on which the fish caught is worked or processed shall be considered as part of the territory of the ACP States , the Community or the " countries and territories " to which they belong , provided that they satisfy the conditions set out in Explanatory Note 6 . Note 2 _ Article 1 ( 1 ) ( b ) , ( 3 ) and ( 4 ) In order to determine whether goods originate in one or more of the ACP States , the Community or in " countries and territories " , it shall not be necessary to establish whether the power and fuel , plant and equipment , and machines and tools used to obtain such goods originate in third countries or not . Note 3 _ Article 1 Where a percentage rule is applied in determining originating status of a product obtained in an ACP State , the value added by the working or processing referred to in Article 1 shall correspond to the ex-works price of the product obtained less the customs value of third products imported into the Community , the ACP States or the " countries and territories " . Note 4 _ Article 3 ( 1 ) and ( 2 ) and Article 4 The percentage rule constitutes , where the product obtained appears in List A , a criterion additional to that of change of tariff heading for any non-originating product used . Note 5 _ Article 1 Packing shall be considered as forming a whole with the goods contained therein . This provision , however , shall not apply to packing which is not of the normal type for the article packed and which has intrinsic utilization value and is of a durable nature , apart from its function as packing . Note 6 The term " their vessels " shall apply to vessels : _ which are registered or recorded in a Member State or an ACP State ; _ which sail under the flag of a Member State or an ACP State ; _ which are owned to an extent of at least 50 % by nationals of States party to the Convention or by a company with its head office in one of these States , of which the manager or managers , chairman of the board of directors or of the supervisory board , and the majority of the members of such board , are nationals of States party to the Convention and of which , in addition in the case of partnerships or limited companies , at least half the capital belongs to States party to the Convention or to public bodies or nationals of such States ; _ of which at least 50 % of the crew , captain and officers included , are nationals of States party to the Convention . Note 7 _ Article 4 " Ex-works price " shall mean the price paid to the manufacturer in whose undertaking the last working or processing is carried out , provided the price includes the value of all the products used in manufacture . " Customs value " shall be understood as meaning the customs value laid down in the Convention concerning the valuation of goods for customs purposes signed in Brussels on 15 December 1950 . Note 8 _ Article 23 The authorities consulted shall furnish any information concerning the conditiens under which the product has been made , indicating especially the conditions in which the rules of origin have been respected in the various ACP States , Member States or " countries and territories " concerned . Note 9 _ Article 1 ( 3 ) Within the meaning of this Protocol " countries and territories " shall mean the countries and territories referred to in Part Four of the Treaty establishing the European Economic Community and in Article 24 of the Act of Accession . ANNEX II LIST A List of working or processing operations which result in a change of tariff heading without conferring the status of " originating products " on the products undergoing such operations , or conferring this status only subject to certain conditions Products obtained * * Working or processing that confers the * Working or processing that does not * * status of originating products when the * confer the status of originating products CCt * * * following conditions are met heading * Description No 02.06 * Meat and edible meat offals * Salting , placing in brine , drying * ( except poultry liver ) , salted , in * or smoking of meat and edible * brine , dried or smoked * meat offals of heading Nos 02.01 * * and 02.04 03.02 * Fish , dried , salted or in brine , * Drying , salting , placing in brine ; * smoked fish , whether or not * smoking of fish , whether cooked * cooked before or during the * or not * smoking process 04.02 * Milk and cream , preserved , * Preserving , concentrating , or * concentrated or sweetened * adding sugar to milk or cream of * * heading No 04.01 04.03 * Butter * Manufacture from milk or cream 04.04 * Cheese and curd * Manufacture from products of * * heading Nos 04.01 , 04.02 and * * 04.03 07.02 * Vegetables ( whether or not * Freezing of vegetables * cooked ) , preserved by freezing 07.03 * Vegetables , provisionally pre - * Placing in brine or in other * served in brine , in sulphur water * solutions of vegetables of heading * or in other preservative sol - * No 07.01 * utions , but not specifically prepared * for immediate consumption 07.04 * Dried , dehydrated or evaporated * Drying dehydration , evaporation * vegetables , whole , cut , sliced , * cutting , grinding , powdering of * broken or in powder , but not * vegetables of heading Nos 07.01 * further prepared * to 07.03 08.10 * Fruit ( whether or not cooked ) , * Freezing of fruit * preserved by freezing , not * containing added sugar 08.11 * Fruit provisionally preserved ( for * Placing in brine or in other * example , by sulphur dioxide gas , * solutions of fruit of heading Nos * in brine , in sulphur water or in * 08.01 to 08.09 * other preservative solutions ) , but * unsuitable in that state for * immediate consumption 08.12 * Fruit , dried , other than that * Drying of fruit * falling within heading No 08.01 , * 08.02 , 08.03 , 08.04 or 08.05 11.01 * Cereal flours * Manufacture from cereals 11.02 * Cereal groats and cereal meal ; * Manufacture from cereals * other worked cereal grains ( for * example , rolled , flaked , polished , * pearled or kibbled , but not * further prepared ) , except husked , * glazed , polished or broken rice ; * germ of cereals , whole , rolled , * flaked or ground 11.03 * Flours of the leguminous * Manufacture from dried legumin - * vegetables falling within heading * ous vegetables * No 07.05 11.04 * Flours of the fruits falling within * Manufacture from fruits of * any heading in Chapter 8 * Chapter 8 11.05 * Flour , meal and flakes of potato * Manufacture from potatoes 11.06 * Flour and meal of sago and of * Manufacture from products of * manioc , arrowroot , salep and * heading No 07.06 * other roots and tubers falling * within heading No 07.06 11.07 * Malt , roasted or not * Manufacture from cereals 11.08 * Starches ; inulin * Manufacture from cereals of * * Chapter 10 , or from potatoes or * * other products of Chapter 7 11.09 * Wheat gluten , whether or not * Manufacture from wheat or * dried * wheat flours 15.01 * Lard , other pig fat and poultry * Manufacture from products of * fat , rendered or solvent-extracted * heading No 02.05 15.02 * Fat of bovine cattle , sheep or * Manufacture from products of * goats , unrendered ; rendered or * heading Nos 02.01 and 02.06 * solvent-extracted fats ( including " premier jus " ) obtained from * those unrendered fats 15.04 * Fats and oils , of fish and marine * Manufacture from fish or marine * mammals , whether or not * mammals caught by fishing * refined * vessels of third countries 15.06 * Other animal oils and fats * Manufacture from products of * ( including neat's-foot oil and * Chapter 2 * fats from bones or waste ) ex 15.07 * Fixed vegetable oils , fluid or * Manufacture from products of * solid , crude , refined or purified , * Chapters 7 and 12 * but not including Chinawood oil , * myrtlewax , Japan wax or oil of * tung nuts , oleococca seeds or * oiticia seeds ; also not including * oils of a kind used in machinery * or mechanical appliances or for * industrial purposes other than the * manufacture of edible products 16.01 * Sausages and the like , of meat , * Manufacture from products of * meat offal or animal blood * Chapter 2 16.02 * Other prepared or preserved meat * Manufacture from products of * or meat offal * Chapter 2 16.04 * Prepared or preserved fish , * Manufacture from products of * including caviar and caviar * Chapter 3 * substitutes 16.05 * Crustaceans and molluscs , * Manufacture from products of * prepared or preserved * Chapter 3 17.02 * Other sugars ; sugar syrups ; * Manufacture from any product * artificial honey ( whether or not * mixed with natural honey ) ; * caramel 17.04 * Sugar confectionery , not con - * Manufacture from other products * taining cocoa * of Chapter 17 the value of which * * exceeds 30 % of the value of the * * finished product 17.05 * Flavoured or coloured sugars , * Manufacture from other products * syrups and molasses , but not * of Chapter 17 the value of which * including fruit juices containing * exceeds 30 % of the value of the * added sugar in any proportion * finished product 18.06 * Chocolate and other food * Manufacture from products of * preparations containing cocoa * Chapter 17 the value of which * * exceeds 30 % of the value of the * * finished product 19.01 * Malt extract * Manufacture from products of * * heading No 11.07 19.02 * Preparations of flour , meal , * Manufacture from cereals and * starch or malt extract , of a kind * derivatives thereof , meat and * used as infant food or for * milk , or in which the value of * dietetic or culinary purposes , con - * products of Chapter 17 used * taining less than 50 % by weight * exceeds 30 % of the value of the * of cocoa * finished product 19.03 * Macaroni , spaghetti and similar * * Manufacture from durum wheat * products Products obtained * * Working or processing that confers the * Working or processing that does not * * * status of originating products when the CCT * * * following conditions are met heading * Description No 19.04 * Tapioca and sago ; tapioca and * Manufacture from potato starch * sago substitutes from potato or * other starches 19.05 * Prepared foods obtained by the * Manufacture from any product * swelling or roasting of cereals or * other than of Chapter 17 ( 1 ) or * cereal products ( puffed rice , * in which the value of the * cornflakes and similar products ) * products of Chapter 17 used * * exceeds 30 % of the value of the * * finished product 19.06 * Communion wafers , empty * Manufacture from products of * cachets of a kind suitable for * Chapter 11 * pharmaceutical use , sealing * wafers , rice paper , and similar * products 19.07 * Bread , ships' biscuits and other * Manufacture from products of * ordinary bakers' wares , not con - * Chapter 11 * taining added sugar , honey , eggs , * fats , cheese or fruit 19.08 * Pastry , biscuits , cakes and other * Manufacture from products of * fine bakers' wares , whether or * Chapter 11 * not containing cocoa in any * proportion 20.01 * Vegetables and fruit prepared or * Preserving vegetables , fresh or * preserved by vinegar or acetic * frozen or preserved temporarily * acid , with or without sugar , * or preserved in vinegar * whether or not containing salt , * spices or mustard 20.02 * Vegetables prepared or preserved * Preserving vegetables fresh or * otherwise than by vinegar or * frozen * acetic acid 20.03 * Fruit preserved by freezing , con - * Manufacture from products of * taining added sugar * Chapter 17 of which the value * * exceeds 30 % of the value of the * * finished product 20.04 * Fruits , fruit-peel and parts of * Manufacture from products of * plants , preserved by sugar * Chapter 17 of which the value * ( drained , glacé or crystallized * exceeds 30 % of the value of the * * finished product ex 20.05 * Jams , fruit jellies , marmalades , * Manufacture from products of * fruit purées and fruit pastes , being * Chapter 17 of which the value * cooked preparations , containing * exceeds 30 % of the value of the * added sugar * finished product 20.06 * Fruit otherwise prepared or * preserved whether or not con - * taining added sugar or spirit : ( 1 ) This rule does not apply where the use of maize of the " zea indurata " type or " durum wheat " is concerned . Products obtained * * Working or processing that confers the * Working or processing that does not * * status of originating products when the * confer the status of originating products CCT * * * following conditions are met heading * Description No * A . Nuts * * Manufacture , without added * * * sugar or spirit , in which the * * * value of the constituent * * * " originating products " of heading * * * Nos 08.01 , 08.05 and 12.01 , * * * represents at least 60 % of the * * * value of the manufactured * * * product * B . Other fruits * Manufactured from products of * * Chapter 17 of which the value * * exceeds 30 % of the value of the * * finished product ex 20.07 * Fruit juices ( including grape * Manufacture from products of * must ) , whether or not containing * Chapter 17 of which the value * added sugar , but unfermented and * exceeds 30 % of the value of the * not containing spirit * finished product ex 21.01 * Roasted chicory and extracts * Manufacture from chicory roots , * thereof * fresh or dried 21.05 * Soups and broths in liquid , solid * Manufacture from products of * or powder forms ; homogenized * heading No 20.02 * food preparations 22.02 * Lemonade , flavoured spa waters * Manufacture from fruit juices ( 1 ) * and flavoured acrated waters , and * or in which the value of products * other non-alcoholic beverages , not * of Chapter 17 used exceeds 30 % * including fruit and vegetable * of the value of the finished * juices falling within heading No * product * 20.07 22.06 * Vermouths , and other wines of * Manufacture from products of * fresh grapes flavoured with * heading No 08.04 , 20.07 , 22.04 or * aromatic extracts * 22.05 22.08 * Ethyl alcohol or neutral spirits , * Manufacture from products of * undenatured , of a strength of * heading No 08.04 , 20.07 , 22.04 or * 80 * or higher ; denatured spirits * 22.05 * ( including ethyl alcohol and * neutral spirits ) of any strength 22.09 * Spirits ( other than those of * Manufacture from products of * heading No 22.08 ) ; liqueurs and * heading No 08.04 , 20.07 , 22.04 or * other spirituous beverages ; com - * 22.05 * pound alcoholic preparations * ( known as " concentrated * extracts " ) for the manufacture of * beverages 22.10 * Vinegar and substitutes for vinegar * Manufacture from products of * * heading No 08.04 , 20.07 , 22.04 or * * 22.05 ( 1 ) This rule does not apply where fruit juices of pineapple , lime and grapefruit are concern . Products obtained * * Working or processing that confers the * Working or processing that does not * * status of originating products when the * * confer the status of originating products CCT * * * following conditions are met heading * Description No ex 23.03 * Residues from the manufacture of * Manufacture from maize or maize * maize starch ( excluding concen - * flour * trated steeping liquours ) , of a * protein contents , calculated on the * dry product , exceeding 40 % dry * weight 23.04 * Oil cake and other residues * Manufacture from various * ( except dregs ) resulting from the * products * extraction of vegetable oils 23.07 * Sweetened forage ; other * Manufacture from cereals and * preparations of a kind used in * derived products , meat , milk , * animal feeding * sugar and molasses ex 24.02 * Cigarettes , cigars , smoking * * Manufacture from products of * tobacco * * heading No 24.01 of which at * * * least 70 % by quantity are " origi - * * * nating products " ex 28.38 * Aluminium sulphate * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 30.03 * Medicaments ( including veterin - * * Manufacture in which the value * ary medicaments ) * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 31.05 * Other fertilizers ; goods of Chap - * * Manufacture in which the value * ter 31 in tablets , lozenges and * * of the products used does not * similar prepared forms or in * * exceed 50 % of the value of the * packings of a gross weight not * * finished product * exceeding 10 kg 32.06 * Coiour lakes * Manufacture from materials of * * heading No 32.04 or 32.05 ( 1 ) 32.07 * Other colouring matter ; inor - * Mixing of oxides or salts of * ganic products of a kind used as * Chapter 28 with extenders such * luminophores * as barium sulphate , chalk barium * * carbonate and satin white ( 1 ) 33.05 * Aqueous distillates and aqueous * Manufacture from products of * solutions of essential oils , * heading No 33.01 ( 1 ) * including such products suitable * for medicinal uses 35.05 * Dextrins and dextrin glues ; * * Manufacture from maize or * soluble or roasted starches ; starch * * potatoes * glues ( 1 ) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B . 37.01 * Photographic plates and film in * Manufacture from products of * the flat , sensitized , unexposed , of * heading No 37.02 ( 1 ) * any material other than paper , * paperboard or cloth 37.02 * Film in rolls , sensitized , unex - * Manufacture from products of * posed , perforated or not * heading No 37.01 ( 1 ) 37.04 * Sensitized plates and film , * Manufacture from products of * exposed but not developed , * heading No 37.01 or 37.02 ( 1 ) * negative or positive 38.11 * Disinfectants , insecticides , fungi - * * Manufacture in which the value * cides , weed-killers , anti-sprouting * * of the products used does not * products , rat poisons and simi - * * exceed 50 % of the value of the * lar products , put up in forms or * * finished product * packings for sale by retail or as * preparations or as articles ( for * example , sulphur-treated bands , * wicks and candles , fly-papers ) 38.12 * Prepared glazings , prepared * * Manufacture in which the value * dressings and prepared mordants , * * of the products used does not * of a kind used in the textile , * * exceed 50 % of the value of the * paper , leather or like industries * * finished product 38.13 * Pickling preparations for metal * * Manufacture in which the value * surfaces ; fluxes and other * * of the products used does not * auxiliary preparations for * * exceed 50 % of the value of the * soldering , brazing or welding ; * * finished product * soldering , brazing or welding * powders and pastes consisting of * metal and other materials ; pre - * parations of a kind used as cores * or coatings for welding rods and * electrodes ex 38.14 * Anti-knock preparations , oxi - * * Manufacture in which the value * dation inhibitors , gum inhibitors , * * of the products used does not * viscosity improvers , anti-corrosive * * exceed 50 % of the value of the * preparations and similar prepared * * finished product * additives for mineral oils , * excluding prepared additives for * lubricants 38.15 * Prepared rubber accelerators * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 38.17 * Preparations and charges for * * Manufacture in which the value * fire-extinguishers ; charged fire - * * of the products used does not * extinguishing grenades * * exceed 50 % of the value of the * * * finished product 38.18 * Composite solvents and thinners * * Manufacture in which the value * for varnishes and similar products * * of the products used does not * * * exceed 50 % of the value of the * * * finished product ex 38.19 * Chemical products and prepara - * * Manufacture in which the value * tions of the chemical or allied * * of the products used does not * industries ( including those con - * * exceed 50 % of the value of the * sisting of mixtures of natural * * finished product * products ) , not elsewhere specified * or included ; residual products of * the chemical or allied industries , * not elsewhere specified or * included , excluding : * _ Fusel oil and Dippel's oil ; * _ Naphthenic acids and their * non-water-soluble salts , esters * of naphthenic acids ; * _ Sulphonaphthenic acids and * their non-water-soluble salts ; * esters of sulphonaphthenic * acids ; * _ Petroleum sulphonates , exclud - * ing petroleum sulphonates of * alkali metals , of ammonium * or of ethanolamines , * thiophenated sulphonic acids * of oils obtained from * bituminous minerals , and * their salts ; * _ Mixed alkylbenzenes and * mixed alkylnaphthalenes ; * _ lon exchangers ; * _ Catalysts ; * _ Getters for vacuum tubes ; * _ Refractory cements or mortars * and similar preparations ; * _ Alkaline iron oxide for the * purification of gas ; * _ Carbon ( excluding that in * artificial graphite of heading * No 38.01 ) of metallo-graphite * or other compounds , in the * form of small plates , bars or * other semi-manufactures Products obtained * * Working or processing that confers the * Working or processing that does not * * * status of originating products when the * * confer the status of originating products CCT * * * following conditions are met heading * Description No ex 39.02 * Polymerization products * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 39.07 * Articles of materials of the kinds * * Manufacture in which the value * described in heading Nos 39.01 * * of the products used does not * to 39.06 * * exceed 50 % of the value of the * * * finished product 40.05 * Plates , sheets and strip , of * * Manufacture in which the value * unvulcanized natural or synthetic * * of the products used does not * rubber , other than smoked sheets * * exceed 50 % of the value of the * and crepe sheets of heading * * finished product * No 40.01 or 40.02 ; granules of * unvulcanized natural or synthetic * rubber compounded ready for * vulcanization ; unvulcanized * natural or synthetic rubber , com - * pounded before or after coagul - * ation either with carbon black * ( with or without the addition of * mineral oil ) or with silica ( with * or without the addition of * mineral oil ) , in any form , of a * kind known as masterbatch 41.08 * Patent leather and imitation * * Varnishing or metallizing of * patent leather ; metallized leather * * leather of heading Nos 41.02 to * * * 41.07 ( other than skin leather of * * * crossed Indian sheep and of * * * Indian goat or kid , not further * * * prepared than vegetable tanned , * * * or if otherwise prepared obviously * * * unsuitable for immediate use in * * * the manufacture of leather articles ) * * * in which the value of the skin * * * leather used does not exceed 50 % * * * of the value of the finished * * * product 43.03 * Articles of furskin * Making up from furskin in plates , * * crosses and similar forms ( heading * * No ex 43.02 ) ( 1 ) 44.21 * Complete wooden packing cases , * * Manufacture from boards not cut * boxes , crates , drums and similar * * to size * packings 45.03 * Articles of natural cork * * Manufacture from products of * * * heading No 45.01 ( 1 ) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B . Products obtained * * Working or processing that confers the * Working or processing that does not * * status of originating products when the * * confer the status of originating products CCT * * * following conditions are met heading * Description No 48.06 * Paper and paperboard , ruled , * * Manufacture from paper pulp * lined or squared , but not other - * wise printed , in rolls or sheets 48.14 * Writing blocks , envelopes , letter * * Manufacture in which the value * cards , plain postcards , correspon - * * of the products used does not * dence cards ; boxes , pouches , * * exceed 50 % of the value of the * wallets and writing compendiums , * * finished product * of paper or paperboard , con - * taining only an assortment of * paper stationery 48.15 * Other paper and paperboard , cut * * Manufacture from paper pulp * to size or shape 48.16 * Boxes , bags and other packing * * Manufacture in which the value * containers , of paper or paper - * * of the products used does not * board * * exceed 50 % of the value of the * * * finished product 49.09 * Picture postcards , Christmas and * Manufacture from products of * other picture greeting cards , * heading No 49.11 * printed by any process , with or * without trimmings 49.10 * Calendars of any kind , of paper * Manufacture from products of * or paperboard , including calendar * heading No 49.11 * blocks 50.04 ( 1 ) * Silk yarn , other than yarn of noil * * Manufacture from products other * or other waste silk , not put up * * than those of heading No 50.04 * for retail sale 50.05 ( 1 ) * Yarn spun from silk waste other * * Manufacture from products of * than noil , not put up for retail * * heading No 50.03 * sale 50.06 ( 1 ) * Yarn spun from noil silk , not put * * Manufacture from products of * up for retail sale * * heading No 50.03 50.07 ( 1 ) * Silk yarn and yarn spun from noil * * Manufacture from products of * or other waste silk , put up for * * heading Nos 50.01 to 50.03 * retail sale ex 50.08 ( 1 ) * Imitation catgut of silk * * Manufacture from products of * * * heading No 50.01 or from * * * products of heading No 50.03 * * * neither carded nor combed ( 1 ) For yarn composed of two or more textile materials , the conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified . This rule , however , does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . Products obtained * * Working or processing that confers the * Working or processing that does not * * status of originating products when the * confer the status of originating products CCT * * * following conditions are met heading * Description No 50.09 ( 1 ) * Woven fabrics of silk or of waste * * Manufacture from products of * silk other than noil * * heading No 50.02 or 50.03 50.10 ( 1 ) * Woven fabrics of noil silk * * Manufacture from products of * * * heading No 50.02 or 50.03 51.01 ( 2 ) * Yarn of man-made fibres * * Manufacture from chemical * ( continuous ) , not put up for * * products or textile pulp * retail sale 51.02 ( 2 ) * Monofil , strip ( artificial straw and * * Manufacture from chemical * the like ) and imitation catgut , of * * products or textile pulp * man-made fibre materials 51.03 ( 2 ) * Yarn of man-made fibres * * Manufacture from chemical * ( continuous ) , put up for retail * * products or textile pulp * sale 51.04 ( 1 ) * Woven fabrics of man-made * * Manufacture from chemical * fibres ( continuous ) , including * * products or textile pulp * woven fabrics of monofil or strip * of heading No 51.01 or 51.02 52.01 ( 2 ) * Metallized yarn , being textile * * Manufacture from chemical * yarn spun with metal or covered * * products , from textile pulp or * with metal by any process * * from natural textile fibres , * * * discontinuous man-made fibres or * * * their waste , neither carded nor * * * combed 52.02 ( 1 ) * Woven fabrics of metal thread or * * Manufacture from chemical * of metallized yarn , of a kind used * * products , from textile pulp or * in articles of apparel , as furnishing * * from natural textile fibres , * fabrics or the like * * discontinuous man-made fibres or * * * their waste 53.06 ( 2 ) * Yarn of carded sheep's or * * Manufacture from products of * lambs' wool ( woollen yarn ) , not * * heading No 53.01 or 53.03 * put up for retail sale 53.07 ( 2 ) * Yarn of combed sheep's or * * Manufacture from products of * lambs' wool ( worsted yarn ) , not * * heading No 53.01 or 53.03 * put up for retail sale ( 1 ) For fabrics composed of two or more textile materials , the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified . This rule , however , does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . This percentage shall be increased : ( i ) to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether , whether or not gimped , falling within heading Nos ex 51.01 and ex 58.07 ; ( ii ) to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder , this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic materia' ( 2 ) For yarn composed of two or more textile materials , the conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified . This rule , however , does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . Products obtained * * * Working or processing that confers the * * Working or processing that does not * * * status of originating products when the * * confer the status of originating products CCT * * * following conditions are met heading * Description No 53.08 ( 1 ) * Yarn of fine animal hair ( carded * * Manufacture from raw fine * or combed ) , not put up for retail * * animal hair of heading No 53.02 * sale 53.09 ( 1 ) * Yarn of horsehair or of other * * Manufacture from raw coarse * coarse animal hair , not put up for * * animal hair of heading No 53.02 * retail sale * * or from raw horsehair of heading * * * No 05.03 53.10 ( 1 ) * Yarn of sheep's or lambs' wool , of * * Manufacture from materials of * horsehair or of other animal hair * * heading Nos 05.03 and 53.01 to * ( fine or coarse ) , put up for retail * * 53.04 * sale 53.11 ( 2 ) * Woven fabrics of sheep's or * * Manufacture from materials of * lambs' wool or of fine animal * * heading Nos 53.01 to 53.05 * hair 53.12 ( 2 ) * Woven fabrics of coarse animal * * Manufacture from products of * hair other than horsehair * * heading Nos 53.02 to 53.05 53.13 ( 2 ) * Woven fabrics of horsehair * * Manufacture from horsehair of * * * heading No 05.03 54.03 ( 1 ) * Flax or ramie yarn , not put up * * Manufacture from products of * for retail sale * * heading No 54.01 neither carded * * * nor combed or from products * * * of heading No 54.02 54.04 ( 1 ) * Flax or ramie yarn , put up for * * Manufacture from materials of * retail sale * * heading No 54.01 or 54.02 54.05 ( 2 ) * Woven fabrics of flax or of ramie * * Manufacture from materials of * * * heading No 54.01 or 54.02 55.05 ( 1 ) * Cotton yarn , not put up for retail * * Manufacture from materials of * sale * * heading No 55.01 or 55.03 55.06 ( 1 ) * Cotton yarn , put up for retail sale * * Manufacture from materials of * * * heading No 55.01 or 55.03 55.07 ( 2 ) * Cotton gauze * * Manufacture from materials of * * * heading No 55.01 , 55.03 or 55.04 55.08 ( 2 ) * Terry towelling and similar * * Manufacture from materials of * terry fabrics , of cotton * * heading No 55.01 , 55.03 or 55.04 55.09 ( 2 ) * Other woven fabrics of cotton * * Manufacture from materials of * * * heading No 55.01 , 55.03 or 55.04 ( 1 ) For yarn composed of two or more textile materials , the conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified . This rule , however , does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . ( 2 ) For fabrics composed of two or more textile materials , the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified . This rule , however , does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . This percentage shall be increased : ( i ) to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether , whether or not gimped , falling within headings Nos ex 51.01 and ex 58.07 ; ( ii ) to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder , this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material . 56.01 * Man-made fibres ( discontinuous ) , * * Manufacture from chemical * not carded , combed or otherwise * * products or textile pulp * prepared for spinning 56.02 * Continuous filament tow for the * * Manufacture from chemical * manufacture of man-made fibres * * products or textile pulp * ( discontinuous ) 56.03 * Waste ( including yarn waste and * * Manufacture from chemical * pulled or garnetted rags ) of man - * * products or textile pulp * made fibres ( continuous or * discontinuous ) , not carded , * combed or otherwise prepared for * spinning 56.04 * Man-made fibres ( discontinuous * * Manufacture from chemical * or waste ) , carded , combed or * * products or textile pulp * otherwise prepared for spinning 56.05 ( 1 ) * Yarn of man-made fibres ( discon - * * Manufacture from chemical * tinuous or waste ) , not put up for * * products or textile pulp * retail sale 56.06 ( 1 ) * Yarn of man-made fibres ( discon - * * Manufacture from chemical * tinuous or waste ) , put up for * * products or textile pulp * retail sale 56.07 ( 2 ) * Woven fabrics of man-made * * Manufacture from products of * fibres ( discontinuous or waste ) * * heading Nos 56.01 to 56.03 57.05 ( 1 ) * Yarn of true hemp * * Manufacture from raw true hemp 57.06 ( 1 ) * Yarn of jute or of other textile * * Manufacture from raw jute , jute * bast fibres of heading No 57.03 * * tow or from other raw textile bast * * * fibres of heading No 57.03 57.07 ( 1 ) * Yarn of other vegetable textile * * Manufacture from raw vegetable * fibres * * textile fibres of heading No 57.02 * * * or 57.04 Products obtained * * * Working or processing that confer the * * Working or processing that does not * * * status of originating products when the * * confer the status of originating products CCT * * * following conditions are met heading * Description No 57.08 * Paper yarn * * Manufacture from products of * * * Chapter 47 , from chemical * * * products , textile pulp or from * * * natural textile fibres discontinuous * * * man-made fibres or their waste , * * * neither carded nor combed 57.09 ( 1 ) * Woven fabrics of true hemp * * Manufacture from products of * * * heading No 57.01 57.10 ( 1 ) * Woven fabrics of jute or of other * * Manufacture from raw jute , jute * textile bast fabrics of heading * * tow or from other raw textile bast * No 57.03 * * fibres of heading No 57.03 57.11 ( 1 ) * Woven fabrics of other vegetable * * Manufacture from materials of * textile fibres * * heading No 57.02 or 57.04 or * * * from coir yarn of heading * * * No 57.07 57.12 * Woven fabrics of paper yarn * * Manufacture from paper , from * * * chemical products , textile pulp or * * * from natural textile fibres , * * * discontinuous man-made fibres or * * * their waste 58.01 ( 2 ) * Carpets , carpeting and rugs , * * Manufacture from materials of * knotted ( made up or not ) * * heading Nos 50.01 to 50.03 , * * * 51.01 , 53.01 to 53.05 , 54.01 , 55.01 * * * to 55.04 , 56.01 to 56.03 or 57.01 * * * to 57.04 58.02 ( 2 ) * Other carpets , carpeting , rugs , * * Manufacture from materials of * mats and matting , and " Kelem " , * * heading Nos 50.01 to 50.03 , * " Schumacks " and " Karamanie " * * 51.01 , 53.01 to 53.05 , 54.01 , 55.01 * rugs and the like ( made up or not ) * * to 55.04 , 56.01 to 56.03 , 57.01 to * * * 57.04 or from coir yarn of heading * * * No 57.07 58.04 ( 2 ) * Woven pile fabrics and chenille * * Manufacture from materials of * fabrics ( other than terry towelling * * heading Nos 50.01 to 50.03 , * or similar terry fabrics of cotton * * 53.01 to 53.05 , 54.01 , 55.01 to * of heading No 55.08 and * * 55.04 , 56.01 to 56.03 , 57.01 to * fabrics of heading No 58.05 ) * * 57.04 or from chemical products * * * or textile pulp ( 1 ) For fabrics composed of two or more textile materials , the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified . This rule , however , does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . This percentage shall be increased : ( i ) to 20 % where the material in question is yarn made of polyurechane segmented with flixible segments of polyether , whether or not gimped , falling within heading Nos ex 51.01 and ex 58.07 ; ( ii ) to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder , this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material . ( 2 ) For products composed of two or more textile materials , the conditions shown in this list must also be met in respect of each of the headings under which products of the other textile materials of which the mixed product is composed would be classified . This rule , however , does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . This percentage shall be increased : ( i ) to 20 % where the product in question is yarn made of polyurethane segmented with flexible segments of polyether , whether or not gimped , falling within heading Nos ex 51.01 and ex 58.07 ; ( ii ) to 30 % where the product in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder , this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material . Products obtained * * * Working or processing that confers the * * Working or processing that does not * * * status of originating products when the * * confer the status of originating products CCT * * * following conditions are met heading * Description No 58.05 ( 1 ) * Narrow woven fabrics , and * * Manufacture from materials of * narrow fabrics ( bolduc ) consisting * * heading Nos 50.01 to 50.03 , * of warp without weft assembled * * 53.01 to 53.05 , 54.01 , 55.01 to * by means of an adhesive , other * * 55.04 , 56.01 to 56.03 or 57.01 to * than goods falling within heading * * 57.04 or from chemical products * No 58.06 * * or textile pulp 58.06 ( 1 ) * Woven labels , badges and the * * Manufacture from materials of * like , not embroidered , in the * * heading Nos 50.01 to 50.03 , * piece , in strips or cut to shape or * * 53.01 to 53.05 , 54.01 , 55.01 to * size * * 55.04 , 56.01 to 56.03 or from * * * chemical products or textile pulp 58.07 ( 1 ) * Chenille yarn ( including flock * * Manufacture from materials of * chenille yarn ) , gimped yarn ( other * * heading Nos 50.01 to 50.03 , * than metallized yarn of heading * * 53.01 to 53.05 , 54.01 , 55.01 to * No 52.01 and gimped horsehair * * 55.04 , 56.01 to 56.03 or from * yarn ) ; braids and ornamental * * chemical products or textile pulp * trimmings in the piece ; tassels , * pompons and the like 58.08 ( 1 ) * Tulle and other net fabrics ( but * * Manufacture from materials of * not including woven , knitted or * * heading Nos 50.01 to 50.03 , * crocheted fabrics ) , plain * * 53.01 to 53.05 , 54.01 , 55.01 to * * * 55.04 , 56.01 to 56.03 or from * * * chemical products or textile pulp 58.09 ( 1 ) * Tulle and other net fabrics ( but * * Manufacture from materials of * not including woven , knitted or * * heading Nos 50.01 to 50.03 , * crocheted fabrics ) , figured ; hand * * 53.01 to 53.05 , 54.01 , 55.01 to * or mechanically made lace , in * * 55.04 , 56.01 to 56.03 or from * the piece , in strips or in motifs * * chemical products or textile pulp 58.10 * Embroidery , in the piece , in strips * * Manufacture in which the value * or in motifs * * of the product used does not * * * exceed 50 % of the value of * * * finished product 59.01 ( 1 ) * Wadding and articles of wadding ; * * Manufacture either from natural * textile flock and dust and mill * * fibres or from chemical products * neps * * or textile pulp 59.02 ( 1 ) * Felt and articles of felt , whether * * Manufacture either from natural * or not impregnated or coated * * fibres or from chemical products * * * or textile pulp ( 1 ) For products composed of two or more textile materials , the conditions shown in this list must also be met in respect of each of the headings under which products of the other textile materials of which the mixed product is composed would be classified . This rule , however , does not apply to any one of more mixed textile materials whose weight does not exeed 10 % of the total weight of textile materials incorporated . This percentage shall be increased : ( i ) to 20 % where the product in question is yarn made of polyurethane segmented with flexible segmetns of polyether , whether or not gimped , falling within heading Nos ex 51.01 and ex 58.07 ; ( ii ) to 30 % where the product in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder , this core having been inserted and glued by means of a transparent or coloured glued between two films of artificial plastic material . ex 59.02 ( 1 ) * Needled felt , whether or not * * Manufacture from fibre or * impregnated or coated * * continuous polypropylene filament * * * of which the denomination of the * * * filaments is less than 8 denier * * * and of which the value does not * * * exceed 40 % of the value of the * * * finished product 59.03 ( 1 ) * Bonded fibre fabrics , similar * * Manufacture either from natural * bonded yarn fabrics , and articles * * fibres or from chemical products * of such fabrics , whether or not * * or textile pulp * impregnated or coated 59.04 ( 1 ) * Twine , cordage , ropes and cables , * * Manufacture either from natural * plaited or not * * fibres or from chemical products * * * or textile pulp or from coir yarn * * * of heading No 57.07 59.05 ( 1 ) * Nets and netting made of twine , * * Manufacture either from natural * cordage or rope , and made up * * fibres or from chemical products * fishing nets of yarn , twine , * * or textile pulp or from coir yarn * cordage or rope * * of heading No 57.07 59.06 ( 1 ) * Other articles made from yarn , * * Manufacture either from natural * twine , cordage , rope or cables , * * fibres or from chemical products * other than textile fabrics and * * or textile pulp or from coir yarn * articles made from such fabrics * * of heading No 57.07 59.07 * Textile fabrics coated with gum * * Manufacture from yarn * or amulaceous substances of a * kind used for the outer covers of * books and the like , tracing cloth ; * prepared painting canvas ; buck - * ram and similar fabrics for hat * foundations and similar uses 59.08 * Textile fabrics impregnated , * * Manufacture from yarn * coated , covered or laminated with * preparations of cellulose deriva - * tives or of other artificial plastic * materials 59.09 * Textile fabrics coated or impreg - * * Manufacture from yarn * nated with oil or preparations * with a basis of drying oil 59.10 ( 1 ) * Linoleum and materials prepared * * Manufacture either from yarn or * on a textile base in a similar * * from textile fibres * manner to linoleum , whether or * not cut to shape or of a kind * used as floor coverings ; floor * coverings consisting of a coating * applied on a textile base , cut to * shape or not Products obtained * * * Working or processing that confers the * * Working or processing that does not * * * status of originating products when the * * center the status of originating products CCT * * * following conditions are met heading * Description No Products obtained * * * Working or processing that confers the * * Working or processing that does not * * * status of originating products when the * * confer the status of originating products CCT * * * following conditions are met heading * Description No 59.11 * Rubberized textile fabrics , other * * Manufacture from yarn * than rubberized knitted or * crocheted goods 59.12 * Textile fabrics otherwise impreg - * * Manufacture from yarn * nated or coated ; painted canvas * being theatrical scenery , studio * backcloths or the like 59.13 ( 1 ) * Elastic fabrics and trimmings * * Manufacture from single yarn * ( other than knitted or crocheted * goods ) consisting of textile * materials combined with rubber * threads 59.15 ( 1 ) * Textile hosepiping and similar * * Manufacture from materials of * tubing , with or without lining , * * heading Nos 50.01 to 50.03 , * armour or accessories of other * * 53.01 to 53.05 , 54.01 , 55.01 to * materials * * 55.04 , 56.01 to 56.03 or 57.01 to * * * 57.04 or from chemical products * * * or textile pulp 59.16 ( 1 ) * Transmission , conveyor or * * Manufacture from materials of * elevator belts or belting , of textile * * heading Nos 50.01 to 50.03 , * material , whether or not * * 53.01 to 53.05 , 54.01 , 55.01 to * strengthened with metal or other * * 55.04 , 56.01 to 56.03 or 57.01 to * material * * 57.04 or from chemical products * * * or textile pulp 59.17 ( 1 ) * Textile fabrics and textile * * Manufacture from materials of * articles , of a kind commonly used * * heading Nos 50.01 to 50.03 , * in machinery or plant * * 53.01 to 53.05 , 54.01 , 55.01 to * * * 55.04 , 56.01 to 56.03 or 57.01 to * * * 57.04 or from chemical products * * * or textile pulp ex Chap - * Knitted and crocheted goods , * * Manufacture from natural fibres , ter 60 ( 1 ) * excluding knitted or crocheted * * carded or combed , from materials * goods obtained by sewing or by * * of heading Nos 56.01 to 56.03 , * the assembly of pieces of knitted * * from chemical products or textile * or crocheted goods ( cut or * * pulp * obtained directly to shape ) ex 60.02 * Gloves , mittens and mitts , knitted * * Manufacture from yarn ( * ) * or crocheted , not elastic or * rubberized , obtained by sewing or * by the assembly of pieces of * knitted or crocheted goods ( cut * or obtained directly to shape ) ( 1 ) For products composed of two or more textile materials , the conditions shown in this list must also be met in respect of each of the headings under which products of the other textile materials of which the mixed product is composed would be classified . This rule , however , does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . This percentage shall be increased : ( i ) to 20 % where the product in question is yarn made of polyurethane segmented with flexible segments of polyether , whether or not gimped , falling within heading Nos ex 51.01 and ex 58.07 ; ( ii ) to 30 % where the product in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder , this core having been inserted and glued by means of a transparent of coloured glue between two films of artificial plastic material . ( 2 ) Trimmings and accessories used ( excluding linings and interlining ) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated . Products obtained * * * Working or processing that confers the * * Working or processing that does not * * * status of originating products when the * * confer the status of originating products CCT * * * following conditions are met heading * Description No ex 60.03 * Stockings , under stockings , socks , * * Manufacture from yarn ( 1 ) * anklesocks , sockettes and the like , * knitted or crocheted , not elastic * or rubberized , obtained by * sewing or by the assembly of * pieces of knitted or crocheted * goods ( cut or obtained directly to * shape ) ex 60.04 * Under garments , knitted or cro - * * Manufacture from yarn ( 1 ) * cheted , not elastic or rubberized , * obtained by sewing or by the * assembly of pieces of knitted or * crocheted goods ( cut or obtained * directly to shape ) ex 60.05 * Outer garments and other * * Manufacture from yarn ( 1 ) * articles , knitted or crocheted , not * elastic or rubberized , obtained * by sewing or by the assembly of * pieces of knitted or crocheted * goods ( cut or obtained directly to * shape ) ex 60.06 * Other articles , knitted or * * Manufacture from yarn ( 1 ) * crocheted , elastic or rubberized * ( including elastic knee-caps and * elastic stockings ) , obtained by * sewing or by the assembly of * pieces of knitted or crocheted * goods ( cut or obtained directly * to shape ) 61.01 * Men's and boys' outer garments * * Manufacture from yarn ( 1 ) ( 2 ) ex 61.01 * Fire resistant equipment of cloth * * Manufacture from uncoated cloth * covered by foil of aluminized * * of which the value does not * polyester * * exceed 40 % of the value of the * * * finished product ( 1 ) ( 2 ) ex 61.02 * Women's , girls' and infants' * * Manufacture from yarn ( 1 ) ( 2 ) * outer garments , not embroidered ex 61.02 * Fire resistant equipment of cloth * * Manufacture from uncoated cloth * covered by foil of aluminized * * of which the value does not * polyester * * exceed 40 % of the value of the * * * finished product ( 1 ) ( 2 ) ex 61.02 * Women's , girls' and infants' * * Manufacture from fabrics , not * outer garments , embroidered * * embroidered , the value of which * * * does not exceed 40 % of the * * * value of the finished product ( 1 ) ( 1 ) Trimmings and accessories used ( excluding linings and interlining ) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated . ( * ) These provisions do not apply where the products are obtained from printed fabric in accordance with the conditions shown in List B . Products obtained * * * Working or processing that confers the * * Working or processing that dies not * * * status of originating products when the CCT * * * following conditions are met heading * Description No 61.03 * Men's and boys' under garments , * * Manufacture from yarn ( 1 ) ( 2 ) * including collars , shirt fronts and * cuffs 61.04 * Women's , girls' and infants' * * Manufacture from yarn ( 1 ) ( 2 ) * under garments ex 61.05 * Handkerchiefs , not embroidered * * Manufacture from unbleached * * * single yarn ( 1 ) ( 2 ) ( 3 ) ex 61.05 * Handkerchiefs , embroidered * * Manufacture from fabrics , not * * * embroidered , the value of which * * * does not exceed 40 % of the * * * value of the finished product ( 1 ) ex 61.06 * Shawls , scarves , mufflers , man - * * Manufacture from unbleached * tillas , veils and the like , not * * single yarn of natural textile * embroidered * * fibres or discontinuous man-made * * * fibres or their waste , or from * * * chemical products or textile * * * pulp ( 1 ) ( 2 ) ex 61.06 * Shawls , scarves , mufflers , man - * * Manufacture from fabrics , not * tillas , veils and the like , * * embroidered , the value of which * embriodered * * does not exceed 40 % of the value * * * of the finished product ( 1 ) 61.07 * Ties , bow ties and cravats * * Manufacture from yarn ( 1 ) ( 2 ) ex 61.08 * Collars , tuckers , falls , bodice - * * Manufacture from yarn ( 1 ) ( 2 ) * fronts , jabots , cuffs , flounces , * yokes and similar accessories and * trimmings for women's and girls' * garments , not embroidered ex 61.08 * Collars , tuckers , fallals , bodice - * * Manufacture from fabrics , not * fronts , jabots , cuffs , flounces , * * embroidered , the value of which * yokes and similar accessories and * * does not exceed 40 % of the * trimmings for women's and * * value of the finished product ( 1 ) * girls' garments , embroidered 61.09 * Corsets , corset-belts , suspender - * * Manufacture from yarn ( 1 ) ( 2 ) * belts , brassières , braces , sus - * penders , garters and the like * ( including such articles of * knitted or crocheted fabric ) , * whether or not elastic 61.10 * Gloves , mittens , mitts , stockings , * * Manufacture from yarn ( 1 ) ( 2 ) * socks and sockettes , not being * knitted or crocheted goods ( 1 ) Trimmings and accessories used ( excluding linings and interlining ) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated . ( 2 ) These provisions do not apply where the products are obtained from printed fabric in accordance with the conditions shown in List B . ( 3 ) For products obtained from two or more textile materials , this rule does not apply to one or more of the mixed textile materials if its or their weight does not exceed 10 % of the total weight of all the textile materials incorporated . ex 61.10 * Fire resistant equipment of cloth * * Manufacture from uncoated cloth * covered by foil of aluminized * * of which the value does not * polyester * * exceed 40 % of the value of the * * * finished product ( 1 ) ( 2 ) 61.11 * Made up accessories for articles * * Manufacture from yarn ( 1 ) ( 2 ) * of apparel ( for example , dress * shields , shoulder and other pads , * belts , muffs , sleeve protectors , * pockets ) 62.01 * Travelling rugs and blankets * * Manufacture from unbleached * * * yarn of Chapters 50 to 56 ( 1 ) ( 2 ) ex 62.02 * Bed linen , table linen , tiolet linen * * Manufacture from unbleached * and kitchen linen ; curtains and * * single yarn ( 1 ) ( 2 ) * other furnishing articles ; not * embroidered ex 62.02 * Bed linen , table linen , toilet linen * * Manufacture from fabrics , not * and kitchen linen ; curtains and * * embroidered , the value of which * other furnishing articles ; * * does not exceed 40 % of the * embroidered * * value of the finished product ex 62.03 * Sacks and bags , of a kind used * * Manufacture from chemical * for the packing of goods * * products , textile pulp or from * * * natural textile fibres , * * * discontinuous man-made fibres or * * * their waste ( 1 ) ( 2 ) 62.04 * Tarpaulins , sails , awnings , sun - * * Manufacture from single un - * blinds , tents and camping goods * * bleached yarn ( 1 ) ( 2 ) 62.05 * Other made up textile articles * * Manufacture in which the value * including dress patterns ) * * of the products used does not * * * exceed 40 % of the value of the * * * finished product 64.01 * Footwear with outer soles and * Manufacture from assemblies of * uppers of rubber or artificial * uppers affixed to inner soles or * plastic material * to other sole components , but * * without outer soles , of any * * material except metal ( 1 ) Trimmings and accessories used ( excluding linings and interlinings which change tarif traeding do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated . ( 2 ) These provisions do not apply where the products are obtained from printed fabric in accordance with the conditions shows in List B . ( 3 ) For products obtained from two or more textile materials , this rule does not apply to one or more of the mixed textile materials if its or their weight does not exceed 10 % of the total weight of all the textile materials incorporated . 64.02 * Footwear with outer soles of * Manufacture from assemblies of * leather or composition leather ; * uppers affixed to inner soles or * footwear ( other than footwear * to other sole components , but * falling within heading No 64.01 ) * without outer soles , of any * with outer soles of rubber or * material except metal * artificial plastic material 64.03 * Footwear with outer soles of wood * Manufacture from assemblies of * or cork * upper affixed to inner soles or to * * other sole components , but * * without outer soles , of any * * material except metal 64.04 * Footwear with outer soles of other * Manufacture from assemblies of * material * uppers affixed to inner soles or to * * other sole components , but * * without outer soles , of any * * material except metal 65.03 * Felt hars and other felt headgear , * * Manufacture from textile fibres * being headgear made from the * felt hoods and plateaux falling * within heading No 65.01 , whether * or not lined or trimmed 65.05 * Hats and other headgear ( includ - * * Manufacture other from yarn or * ing hair nets ) , Knitted or * * from textile fibres * crocheted , or made up from lace , * felt or other textile fabric in the * piece ( but not from strips ) , * whether or not lined or trimmed 66.01 * Umbrellas and sunshades ( includ - * * Manufacture in which the value * ing walking-stick umbrellas , * * of the products used does not * umbrella tents , and garden and * * exceed 50 % of the value of the * similar umbrellas ) * * finished product ex 70.07 * Cats , rolled , drawn or blown glass * Manufacture from drawn , cast or * ( including flashed or wired glass ) * rolled glass of heading Nos 70.04 * cut to shape other than rectangu - * to 70.06 * lar shape , or bent or otherwise * worked ( for example , edge * worked or engraved whether or * not surface ground or polished ; * multiple-walled insulating glass Products obtained * * Working or processing that confers the * Working or processing that does not * * status of originating products when the * * confer the status of originating products CCT * * * * following conditions are met heading * Description No 70.08 * Safety glass consisting of * Manufacture from drawn , cast or * toughened or laminated glass , * rolled of heading Nos 70.04 * shaped or not * to 70.06 70.09 * Glass mirrors ( including rear-view * Manufacture from drawn , cast or * mirrors ) , unframed , framed or * rolled glass of heading Nos 70.04 * backed * to 70.06 71.15 * Articles consisting of , or * * Manufacture in which the value * incorporating , pearls , precious or * * of the products used does not * semi-precious stones ( natural , * * exceed 50 % of the value of the * synthetic or reconstructed ) * * finished product ( 1 ) 73.07 * Blooms , billets , slabs and sheet * Manufacture from products of * bars ( including tinplate bars ) of * heading No 73.06 * iron or steel ; pieces roughly * shaped by forging , of iron steel 73.08 * Iron or steel coils re-rolling * Manufacture from products of * * heading No 73.07 73.09 * Universal plates of iron or steel * Manufacture from products of * * heading No 73.07 to 73.08 73.10 * Bars and rods ( including wire * Manufacture from products of * rod ) , of iron or steel , hot-rolled , * heading No 73.07 * forged , extruded , cold-formed or * cold-finished ( including precision - * made ) ; hollow mining drill steel 73.11 * Angles , shapes and sections , of * Manufacture from products of * iron or steel , hot-rolled , forged , * heading Nos 73.07 to 73.10 , 73.12 * extruded , cold-formed or cold - * or 73.13 * finished ; sheet piling of iron or * steel , whether or not drilled , * punched or made from assembled * elements 73.12 * Hoop and strip , of iron or steel , * Manufacture from products of * hot-rolled or cold-rolled * heading Nos 73.07 to 73.09 or * * 73.13 73.13 * Sheets and plates , of iron or steel , * Manufacture from products of * hot-rolled or cold-rolled * heading Nos 73.07 to 73.09 73.14 * Iron or steel wire , whether or * Manufacture from products of * not coated , but not insulated * heading No 73.10 ( 1 ) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B . 73.16 * Railway and tramway track * * Manufacture from products of * construction material of iron or * * heading No 73.06 * steel , the following : rails , check - * rails , switch blades , crossings ( or * frogs ) , crossing pieces , point rods , * rack rails , sleepers , fish-plates , * chairs , chair wedges , sole plates * ( base places ) , rail clips , bed-plates , * ties and other material specialized * for joining or fixing rails 73.18 * tubes and pipes and blanks * * Manufacture from products of * therefor , of iron ( other than of * * heading Nos 73.06 and 73.07 or * cast iron ) or steel , excluding * * heading No 73.15 in the forms * high-pressure hydro-electric * * specified in heading Nos 73.06 * conduits * * and 73.07 74.03 * Wrought bars , rods , angles , * * Manufacture in which the value * shapes and sections , of copper ; * * of products used does not * copper wire * * exceed 50 % of the value of the * * * finished product ( 1 ) 74.04 * Wrought plates , sheets and strip , * * Manufacture in which the value * of copper * * of the products used does not * * * exceed 50 % of the value of the * * * finished product ( 1 ) 74.05 * Copper foil ( whether or not * * Manufacture in which the value * embossed , cut to shape , perfor - * * of the products used does not * ated , coated , printed , or backed * * exceed 50 % of the value of the * with paper or other reinforcing * * finished product ( 1 ) * material ) , of a thickness * ( excluding any backing ) not * exceeding 0.15 mm 74.06 * Copper powder and flakes * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product ( 1 ) 74.07 * Tubes and pipes and blanks * * Manufacture in which the value * therefor , of copper , hollow bars * * of the products used does not * of copper * * exceed 50 % of the value of the * * * finished product ( 1 ) 74.08 * Tube and pipe fittings ( for * * Manufacture in which the value * example , joints , elbows , sockets * * of the products used does not * and flanges ) , of copper * * exceed 50 % of the value of the * * * finished product ( 1 ) 74.09 * Reservoirs , tanks , vats and * * Manufacture in which the value * similar containers , for any * * of the products used does not * material ( other than compressed * * exceed 50 % of the value of the * or liquified gas ) , of copper , of * * finished product ( 1 ) * a capacity exceeding 300 litres , * whether or not lined or heat - * insulated , but not fitted with * mechanical or thermal equipment 74.10 * Stranded wire , cables , cordage , * * Manufacture in which the value * ropes , plaited bands and the like , * * of the products used does not * of copper wire , but excluding * * exceed 50 % of the value of the * insulated eletric wires and cables * * finished product ( 1 ) 74.11 * Gauze , cloth , grill , netting , * * Manufacture in which the value * fencing , reinforcing fabric and * * of the products used does not * similar materials ( including end - * * exceed 50 % of the value of the * less bands ) , of copper wire * * finished product ( 1 ) 74.12 * Expanded metal , of copper * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product ( 1 ) 74.13 * Chain and parts thereof , of copper * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished products ( 1 ) 74.14 * Nails , tacks , staples , book-nails , * * Manufacture in which the value * spiked cramps , studs , spikes and * * of the products used does not * drawing pins , of copper , or of * * exceed 50 % of the value of the * iron or steel with heads of copper * * finished product ( 1 ) 74.15 * Bolts and nuts ( including bolt * * Manufacture in which the value * ends and screw studs ) , whether * * of the products used does not * or not threaded or tapped , and * * exceed 50 % of the value of the * screws ( including screw hooks * * finished product ( 1 ) * and screw rings ) , of copper ; * rivets , cotter-pins , washers * and spring washers , of copper 74.16 * Springs , of copper * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product ( 1 ) 74.17 * Cooking and heating apparatus * * Manufacture in which the value * of a kind used for domestic * * of the products used does not * purposes , not electrically * * exceed 50 % of the value of the * operated , and parts thereof , of * * finished product ( 1 ) * copper 74.18 * Other articles of a kind commonly * * Manufacture in which the value * used for domestic purposes , * * of the products used does not * sanitary ware for indoor use , and * * exceed 50 % of the value of the * parts of such articles and ware , * * finished product ( 1 ) * of copper 74.19 * Other articles of copper * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product ( 1 ) 75.02 * Wrought bars , rods , angles , * * Manufacture in which the value * shapes and sections , of nickel , * * of the products used does not * nickel wire * * exceed 50 % of the value of the * * * finished product ( 1 ) 75.03 * Wrought plates , sheets and strip , * * Manufacture in which the value * of nickel ; nickel foil ; nickel * * of the products used does not * powders and flakes * * exceed 50 % of the value of the * * * finished product ( 1 ) 75.04 * Tubes and pipes and blanks * * Manufacture in which the value * therefor , of nickel ; hollow bars , * * of the used does not * and tube and pipe fittings ( for * exceed 50 % of the value of the * example , joints , elbows , socket * * finished product ( 1 ) * and flanges ) , of nickel 75.05 * Electro-plating anodes , of nickel , * * Manufacture in which the value * wrought or unwrought , including * * of the products used does not * those produced by electrolysis * * exceed 50 % of the value of the * * * finished product ( 1 ) 75.06 * Other articles of nickel * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product ( 1 ) 76.02 * Wrought bars , rods , angles , shapes * * Manufacture in which the value * and sections , of aluminium ; * * of the products used does not * aluminium wire * * exceed 50 % of the value of the * * * finished product 76.03 * Wrought plates , sheets and strip , * * Manufacture in which the value * of aluminium * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 76.04 * Aluminium foil ( wheather or not * * Manufacture in which the value * embossed , cut to shape , perfor - * * of the products used does not * ated , coated , printed , or backed * * exceed 50 % of the value of the * with paper or other reinforcing * * finished product * material ) , of a thickness * ( excluding any backing ) not * exceeding 0 * 20 mm 76.05 * Aluminium powders and flakes * * Manufacture in which the value * * * of the products used does not * * exceed 50 % of the value of the * * * finished product 76.06 * Tubes and pipes and blanks * * Manufacture in which the value * therefor , of aluminium , hollow * * of the products used does not bars of aluminium * * exceed 50 % of the value of the * * * finished product 76.07 * Tube and pipe fittings ( for * * Manufacture in which the value * example , joints , elbows , sockets * * of the products used does not * and flanges ) , of aluminium * * exceed 50 % of the value of the * * * finished product 76.08 * Structures , complete or incom - * * Manufacture in which the value * plete , whether or not assembled , * * of the products used does not * and parts of structures ( for * * exceed 50 % of the value of the * example , hangars and other * * finished product * buildings , bridges and bridge - * sections , towers , latter masts , * roofs , roofing frameworks , door * and window frames , balustrades , * pillars and columns ) , of alu - * minium ; plates , rods , angles , * shapes , sections , tubes and the * like , prepared for use in struc - * tures , of aluminium 76.09 * Reservoirs , tanks , vats and * * Manufacture in which the value * similar containers , for any * * of the products used does not * material ( other than compressed * * exceed 50 % of the value of the * or liquified gas ) , of aluminium , * * finished product * of a capacity exceeding 300 litres , * whether or not lined or heat * insulated but not fitted with * mechanical or thermal equipment 76.10 * Casks , drums , cans , boxes and * * Manufacture in which the value * similar containers ( including rigid * * of the products used does not * and collapsible tubular * * exceed 50 % of the value of the * containers ) , of aluminium , of a * * finished product * description commonly used for * the conveyance or packing of * goods 76.11 * Containers of aluminium for * * Manufacture in which the value * compressed or liquified gas * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 76.12 * Stranded wire , cables , cordage , * * Manufacture in which the value * ropes , plaited bands and the like , * * of the products used does not * of aluminium wire , but excluding * * exceed 50 % of the value of the * insulated electric wires and cables * * finished product 76.13 * Gauze , cloth , grill , netting , * * Manufacture in which the value * reinforcing fabric and similar * * of the products used does not * materials , of aluminium wire * * exceed 50 % of the value of the * * * finished product 76.14 * Expanded metal , of aluminium * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 76.15 * Articles of a kind commonly used * * Manufacture in which the value * for domestic purposes , sanitary * * of the products used does not * ware for indoor use , and parts * * exceed 50 % of the value of the * of such articles and ware , of * * finished product * aluminium 76.16 * Other articles of aluminium * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 77.02 * Wrought bars , rods , angles , * * Manufacture in which the value * shapes and sections , of * * of the products used does not * magnesium ; magnesium wire ; * * exceed 50 % of the value of the * wrought plates , sheets and strip , * * finished product * of magnesium ; magnesium foil ; * raspings and shavings of uniform * size , powders and flakes , of * magnesium ; tubes and pipes and * blanks therefor , of magnesium ; * hollow bars of magnesium 77.03 * Other articles of magnesium * * Manufacture in which the value * * * of the products used does not * * exceed 50 % of the value of the * * * finished product 78.02 * Wrought bars , rods , angles , * * Manufacture in which the value * shapes and sections , of lead ; lead * * of the products used does not * wire * * exceed 50 % of the value of the * * * finished product ( 1 ) 78.03 * Wrought plates , sheets and strip , * * Manufacture in which the value * of lead * * of the products used does not * * * exceed 50 % of the value of the * * * finished product ( 1 ) 78.04 * Lead foil ( whether or not * * Manufacture in which the value * embossed , cut to shape , perfor - * * of the products used does not * ated , coated , printed , or backed * * exceed 50 % of the value of the * with paper or other reinforcing * * finished product ( 1 ) * material ) , of a weight ( excluding * any backing ) not exceeding 1 * 7 * kg / m2 ; lead powders and flakes 78.05 * Tubes and pipes and blanks * * Manufacture in which the value * therefor , of lead ; hollow bars and * * of the products used does not * tube and pipe fittings ( for * * exceed 50 % of the value of the * example , joints , elbows , sockets , * * finished product ( 1 ) * flanges and S-bends ) 78.06 * Other articles of lead * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product ( 1 ) 79.02 * Wrought bars , rods , angles , * * Manufacture in which the value * shapes and sections , of zinc ; zinc * * of the products used does not * wire * * exceed 50 % of the value of the * * * finished product 79.03 * Wrought plates , sheets and strip , * * Manufacture in which the value * of zinc ; zinc foil ; zinc powders * * of the products used does not * and flakes * * exceed 50 % of the value of the * * * finished product 79.04 * Tubes and pipes and blanks * * Manufacture in which the value * therefor , of zinc ; hollow bars , and * * of the products used does not * tube and pipe fittings ( for * * exceed 50 % of the value of the * example , joints , elbows , sockets * * finished product * and flanges ) , of zinc 79.05 * Gutters , roof capping , skylight * * Manufacture in which the value * frames , and other fabricated * * of the products used does not * building components , of zinc * * exceed 50 % of the value of the * * * finished product 79.06 * Other articles of zinc * * Manufacture in which the value * * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 80.02 * Wrought bars , rods , angles , shapes * * Manufacture in which the value * and sections , of tin ; tin wire * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 80.03 * Wrought plates , sheets and strip , * * Manufacture in which the value * of tin * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 80.04 * Tin foil ( whether or not * * Manufacture in which the value * embossed , cut to shape , perfora - * * of the products used does not * ted , coated , printed , or backed * * exceed 50 % of the value of the * with paper or other reinforcing * * finished product * material ) , of a weight ( excluding * any backing ) not exceeding 1 kg / * m2 ; tin powders and flakes Products obtained * * Working or processing that confers the * Working or processing that does not * * status of originating products when the * confer the status or originating products CCT * * * following conditions are met heading * Description No 80.05 * Tubes and pipes and blanks * * Manufacture in which the value * therefor , of tin ; hollow bars , and * * of the products used does not * tube and pipe fittings ( for * * exceed 50 % of the value of the * example , joints , elbows , sockets * * finished product * and flanges ) , of tin 82.05 * Interchangeable tools for hand * * Working , processing or assembly * tools , for machine tools or for * * in which the value of the * power-operated hand tools ( for * * materials and parts used does not * example , for pressing , stamping , * * exceed 40 % of the value of the * drilling , tapping , threading , * * finished product ( 1 ) * boring , broaching , milling , * cutting , turning , dressing , * morticing or screwdriving ) , * including dies for wire drawing , * extrusion dies for metal , and rock * drilling bits 82.06 * Knives and cutting blades , for * * Working , processing or assembly * machines or for mechanical * * in which the value of the * appliances * * materials and parts used does not * * * exceed 40 % of the value of the * * * finished product ( 1 ) ex * Boilers , machinery and mechanical * * Working processing or assembly Chapter * appliances and parts thereof , * * in which the value of the materials 84 * excluding refrigerators and * * and parts used does not exceed * refrigerating equipment ( electrical * * 40 % of the value of the finished * and other ) ( No 84.15 ) and sewing * * product * machines , including furniture * specially designed for sewing * machines ( ex No 84.41 ) 84.15 * Refrigerators and refrigerating * * Working , processing or assembly * equipment ( electrical and other ) * * in which the value of the non - * * * originating materials and parts * * * used does not exceed 40 % of the * * * value of the finished product , and * * * provided that at least 50 % in * * * value of the materials and parts ( 2 ) * * * used are originating products ( 1 ) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B . ( 2 ) In determining the value of products , materials and parts , the following must be taken into account : ( a ) in respect of originating products , materials and parts , the first verifiable price paid , in case of sale , for the said products on the territory of the country where working , processing or assembly is carried out ; ( b ) in respect of products , materials and parts other than those referred to under ( 2 ) , the provisions of Article 4 of this Protocol determining : ( i ) the value of imported products , ( ii ) the value of products of undetermined origin . Products obtained * * Working or processing the confers the * Working or processing that does not * * status of originating products when the * confer the status of originating products CCT * * * following conditions are met heading * Description No ex 84.41 * Sewing machines , including * * Working , processing or assembly * furniture for sewing machines * * in which the value of the non - * * * originating materials and parts * * * used does not exceed 40 % of the * * * value of the finished product , and * * * provided that : * * * ( a ) at least 50 % in value of the * * * materials and parts ( 1 ) used * * * for the assembly of the head * * * ( motor excluded ) are originat - * * * ing products , and * * * ( b ) the thread tension , crochet and * * * zigzag mechanisms are * * * originating products ex * Electrical machinery and equip - * * Working , processing or assembly Chapter * ment ; parts thereof ; exclading * * in which the value of the non - 85 * products of heading No 85.14 or * * originating material and parts * 85.15 * * used does not exceed 40 % of the * * * value of the finished product 85.14 * Microphones and stands therefor ; * * Working , processing or assembly * loudspeakers ; audio-frequency * * in which the value of the non - * electric amplifiers * * originating materials and parts * * * used does not exceed 40 % of the * * * value of the finished product , and * * * provided that : * * * ( a ) at least 50 % in value of the * * * materials and parts ( 3 ) used * * * are originating products , and * * * ( b ) the value of the non-originat - * * * ing transistors used does not * * * exceed 3 % of the value of * * * the finished product ( 2 ) ( 1 ) In determining the value of products , materials and parts , the following must be taken into account : ( a ) in respect of originating products , materials parts , the first verifiable price paid , in case of sale , for the said products on the territory of the country where working , processing or assembly is carried out ; ( b ) in respect of products , materials and parts , other than those referred to under ( a ) , the provisions of Article 4 of this Protocol determining : ( i ) the value of imported products , ( ii ) the value of products of undetermined origin . ( 2 ) This percentage is not cumulative with the 40 % . 85.15 * Radiotelegraphic and radio - * * Working , processing or assembly * telephonic transmission and * * in which the value of the non - * reception apparatus ; radio - * * originating materials and parts * broadcasting and television * * used does not exceed 40 % of the * transmission and reception * * value of the finished product , and * apparatus ( including receivers * * provided that : * incorporating sound recorders or ( a ) at least 50 % in value of the * reproducers ) and television * * ( a ) at least 50 % in value of the * * * materials and parts ( 1 ) used * cameras ; radio navigational aid * * * are originating products , and * apparatus , radar apparatus and * radio remote control apparatus * * ( b ) the value of the non-originat - * * * ing transistors used does not * * * exceed 3 % of the value of * * * the finished product ( 2 ) Chapter * Railway and tramway locomo - * * Working , processing or assembly 86 * tives , rolling-stock and parts * * in which the value of the materials * thereof ; railway and tramway * * and parts used does not exceed * track fixtures and fittings ; traffic * * 40 % of the value of the finished * signalling equipment of all kinds * * product * ( not electrically powered ) ex * Vehicles , other than railway or * * Working , processing or assembly Chapter * tramway rolling-stock , and parts * * in which the value of the materials 87 * thereof , excluding products of * * and parts used does not exceed * heading No 87.09 * * 40 % of the value of the finished * * * product 87.09 * Motor-cycles , autocycles and * * Working , processing or assembly * cycle fitted with an auxiliary * * in which the value of the non - * motor , with or without side cars ; * * originating materials and parts * side-cars of all kinds * * used does not exceed 40 % of the * * * finished product , and provided * * * that at least 50 % in value of the * * * materials and parts ( 1 ) used are * * * originating products ex * Optical , photographic cinema - * * Working , processing or assembly Chapter * tographic , measuring , checking , * * in which the value of the materials 90 * precision , medical and surgical * * and parts used does not exceed * instruments and apparatus and * * 40 % of the value of the finished * parts thereof , excluding products * * product * of heading No 90.05 , 90.07 , 90.08 , * 90.12 or 90.26 ( 1 ) In determining the value of products , materials and parts , the following must be taken into account : ( a ) in respect of originating products , materials and parts , the first verifiable price paid , in case of sale , for the said products on the territory of the country where working , processing or assembly in carried out ; ( b ) in respect of products , materials and parts , other than those referred to under ( a ) , the provisions of Article 4 of this Protocol determining : ( i ) the value of imported products , ( ii ) the value of products of undetermined origin . ( 2 ) This percentage is not cumulative with the 40 % . Products obtained * * Working or processing that confers the * Working or processing that does not * * status of originating products when the * * confer the status of originating products CCT * * * following conditions are met heading * Description No 90.05 * Refracting telescopes ( monocular * * Working , processing or assembly * and binocular ) , prismatic or not * * in which the value of the non - * * * originating materials and parts * * * used does not exceed 40 % of the * * * value of the finished product , and * * * provided that at least 50 % in * * * value of the materials and parts ( 1 ) * * * used are originating products 90.07 * Photographic cameras ; photo - * * Working , processing or assembly * graphic flashlight apparatus * * in which the value of the non - * * * originating materials and parts * * * used does not exceed 40 % of the * * * value of the finished product , and * * * provided that at least 50 % in * * * value of the materials and parts ( 1 ) * * * used are originating products 90.08 * Cinematographic cameras projec - * * Working , processing or assembly * tors , sound recorders and sound * * in which the value of the non - * reproducers ; any combination of * * originating materials and parts * these articles * * used does not exceed 40 % of the * * * value of the finished product , and * * * provided that at least 50 % in * * * value of the materials and parts ( 1 ) * * * used are originating products 90.12 * Compound optical microscopes , * * Working , processing or assembly * whether or not provided with * * in which the value of the non - * means for photographing or * * originating materials and parts * projecting the image * * used does not exceed 40 % of the * * * value of the finished product , and * * * provided that at least 50 % in * * * value of the materials and parts ( 1 ) * * * used are originating products 90.26 * Gas , liquid and electricity supply * * Working , processing or assembly * or production meters ; calibrating * * in which the value of the non - * meters therefor * * originating materials and parts * * * used does not exceed 40 % of the * * * value of the finished product , and * * * provided that at least 50 % in * * * value of the materials and parts ( 1 ) * * * used are originating products ( 1 ) In determining the value of products , materials and parts , the following must be taken into account : ( a ) in respect of originating products , materials and parts , the first verifiable price paid , in case of sale , for the said products on the territory of the country where working , processing or assembly is carried out : ( b ) in respect of products , materials and parts , other than those referred to under ( a ) , the provisions of Article 4 of this Protocol determining : ( i ) the value of imported products , ( ii ) the value of products of undetermined origin . Products obtained * * Working or processing that confers the * Working or processing that does not * * status of originating products when the * * confer the status of originating products CCT * * * following conditions are met heading * Description No ex * Clocks and watches and parts * * Working , processing or assembly Chapter * thereof , excluding products of * * in which the value of the materials 91 * heading No 91.04 or 91.08 * * and parts used does not exceed * * * 40 % of the value of the finished * * * product * * * Working , processing or assembly 91.04 * Other clocks * * in which the value of the non - * * * originating materials and parts * * * used does not exceed 40 % of the * * * value of the finished product , and * * * provided that at least 50 % in * * * value of the materials and parts ( 1 ) * * * used are originating products 91.08 * Clock movements , assembled * * Working , processing or assembly * * * in which the value of the non - * * * originating materials and parts * * * used does not exceed 40 % of the * * * value of the finished product , and * * * provided that at least 50 % in * * value of the materials and parts ( 1 ) * * * used are originating products ex * Musical instruments ; sound * * Working , processing or assembly Chapter * recorders and reproducers ; tele - * * in which the value of the non - 92 * vision image and sound recorders * * originating materials and parts * and reproducers , magnetic ; parts * * used does not exceed 40 % of the * and accessories of such articles ; * * value of the finished product * excluding products of heading * No 92.11 92.11 * Gramophones , dictating machines * * Working , processing or assembly * and other sound recorders and * * in which the value of the non - * reproducers , including record * * originating materials and parts * players and tape decks , with or * * used does not exceed 40 % of the * without sound-heads ; television * * value of the finished product , and * image and sound recorders and * * provided that : * reproducers , magnetic * * * ( a ) at least 50 % in value of the * * * materials and parts ( 1 ) used * * * are originating products , and * * * ( b ) the value of the non-originat - * * * ing transistors used does not * * * exceed 3 % of the value of the * * * finished product ( 2 ) ( 1 ) In determining the value of products , materials and parts , the following must be taken into account : ( a ) in respect of originating products , materials and parts , the first verifiable price paid , in case of sale , for the said products on the territory of the country where working , processing or assembly is carried out ; ( b ) in respect of products , materials and parts , other than those referred to under ( a ) , the provision of Article 4 of this Protocol determining : ( i ) the value of imported products , ( ii ) the value of products of undetermined origin . ( 2 ) This percentage is not cumulative with the 40 % . Chapter * Arms and ammunition ; parts * * Manufacture in which the value 93 * thereof * * of the products used does not * * * exceed 50 % of the value of the * * * finished product 96.02 * Other brooms and brushes ( in - * * Manufacture in which the value * cluding brushes of a kind used as * * of the products does not * parts of machines ) ; paint rollers ; * * exceed 50 % of the value of the * squeegees ( other than roller * * finished product * squeegees ) and mops 97.03 * Other toys ; working models of * * Manufacture in which the value * a kind used for recreational * * of the products used used does not * purposes * * exceed 50 % of the value of the * * * finished product 98.01 * Buttons and button moulds , studs , * * Manufacture in which the value * cuff-links , and press-fasteners , * * of the products used does not * including snap fasteners and press - * * exceed 50 % of the value of the * studs ; blanks and parts of such * * finished product * articles 98.08 * Typewriter and similar ribbons , * * Manufacture in which the value * whether or not on spools ; ink - * * of the products used does not * pads , with or without boxes , * * exceed 50 % of the value of the * * * finished product ANNEX III LIST B List of working or processing operations which do not result in a change of tariff heading , but which do confer the status of " originating products " on the products undergoing such operations Finished products * Working or processing that confers the status of originating * * products CCT * Description heading No * * Incorporation of non-originating materials and * * parts in boilers , machinery , mechanical appliances , * * etc . , of Chapters 84 to 92 in boilers and radiators * * of heading No 73.37 and in the products contained * * in heading Nos 97.07 and 98.03 does not make * * such products lose their status of originating * * products , provided that the value of these products * * does not exceed 5 % of the value of the finished * * product 13.02 * Shellac seed lac , stick lac and other lacs ; natural * Working , processing or assembly in which the value * gums , resins , gum-resins and balsams * of the non-originating materials and parts used * * does not exceed 50 % of the value of the finished * * product ex 15.10 * Fatty alcohols * Manufacture from fatty acids ex 21.03 * Prepared mustard * Manufacture from mustard flour ex 22.09 * Whisky of an alcoholic strength of less than 50 * Manufacture from alcohol deriving exclusively * * from the distillation of cereals and in which the * * value of the non-originating constituent products * * does not exceed 15 % of the value of the manufac - * * tured product ex 25.09 * Earth colours , calcined or powdered * Crushing and calcination or powdering of earth * * colours ex 25.15 * Marble squared by sawing , of a thickness not Sawing into slabs or sections , polishing , grinding * exceeding 25 cm * and cleaning of marble , including marble not * * further worked than roughly split , roughly squared * * or squared by sawing , of a thickness exceeding * * 25 cm ex 25.16 * Granite , porphyry , basalt , sandstone and other * Sawing of granite , porphyry , basalt , sandstone and * monumental and building stone , squared by sawing , * other building stone , including such stone not * of a thickness not exceeding 25 cm * further worked than roughly split , roughly squared * * or squared by sawing , of a thickness exceeding * * 25 cm ex 25.18 * Calcined dolomite ; agglomerated dolomite ( includ - * Calcination of unworked dolomite * ing tarred dolomite ) Chapters * Products of the chemical and allied industries * Working or processing in which the value of the 28 to 37 * excluding mineral or chemical fertilizers , potassie ; * non-originating products used does not exceed 20 % * calcined , crushed and powdered natural aluminium * of the value of the finished product * calcium phosphates ( ex 31.03 ) and essential oils * other than of citrus fruit , terpeneless ( ex 33.01 ) ex 31.03 * Mineral or chemical fertilizers , porassic : calcined , * Crushing and powdering of calcined natural * crushed and powdered natural aluminium calcium * aluminium calcium phosphates , treated thermically * phosphates ex 33.01 * Essential oils , other than of citrus fruit , terpeneless * Deterpenation of essential oils other than of citrus * * fruit ex * Miscellaneous chemical products , other than refined * Working or processing in which the value of the Chapter 38 * tall oil ( ex 38.05 ) and sulphate turpentine refined * non-originating materials used does not exceed 20 % * ( ex 38.07 ) * of the value of the finished product ex 38.05 * Refined tall oil * Refining of crude tall oil ex 38.07 * Sulphate trupentine , purified * Purification consisting of the distillation or refining * * of raw sulphate turpentine ex * Artificial plastic materials , cellulose ethers and * Working or processing in which the value of the Chapter 39 * esters , artificial resins and articles made of these * non-originating materials used does not exceed * materials , excepting films of ionomers ( ex 39.02 ) * 20 % of the value of the finished product ex 39.02 * Ionomer film * Manufacture from a thermoplastic partial salt which * * is a copolymer of ethylene and metacrylic acid * * partly neutralized with metal ions , mainly zinc and * * sodium ex 40.01 * Slabs of crepe rubber for soles * lamination of natural rubber ex 40.07 * Rubber thread and cord , textile-covered * Manufacture from rubber thread or cord ex 41.01 * Sheep and lambskins without the wool * Removing wool from sheep and lambskins in the * * wool ex 41.02 * Retanned bovine cattle leather ( including * Retanning of bovine cattle leather ( including buffalo leather ) and equine leather , except leather of * leather ) and equine leather , not further prepared * heading Nos 41.06 to 41.08 * than tanned ex 41.03 * Retanned sheep and lambskin , leather , except * Retanning of sheep and lambskin leather , not * leather of heading Nos 41.06 to 41.08 * further prepared than tanned ex 41.04 * Retanned goat and kidskin leather , except leather * Retanning of goat and kidskin leather , not * of heading Nos 41.06 to 41.08 * further prepared than tanned ex 41.05 * Other kinds of retanned leather , except leather of * Retanning of other kinds of leather , not further * heading Nos 41.06 to 41.08 * prepared than tanned ex 43.02 * Assembled furskins * Bleaching , dyeing , dressing , cutting and assembling * * of tanned or dressed furskins ex 50.03 * Silk waste carded or combed * Carding or combing waste silk ex 50.09 ) * Printed fabrics ex 50.10 ) ex 51.04 ) ex 53.11 ) * * Printing accompanied by finishing operations ex 53.12 ) * * ( bleaching , dressing , drying , steaming , burling , ex 53.13 ) * * mending , impregnating , sanforizing , mercerizing ) ex 54.05 ) * * of fabrics the value of which does not exceed ex 55.07 ) * * 47.5 % of the value of the finished product ex 55.08 ) ex 55.09 ) ex 56.07 ) ex 59.14 * Incandescent gas mantles * Manufacture from tubular gas mantle fabric ex 68.03 * Articles of slate , including articles of agglomerated * Manufacture of articles of slate * slate ex 68.13 * Articles of asbestos ; articles of mixtures with a * Manufacture of articles of asbestos or of mixtures * basis of asbestos or of mixtures with a basis of * with a basis of asbestos , or of mixtures with a basis * asbestos and magnesium carbonate * of asbestos and magnesium carbonate ex 68.15 * Articles of mica , including bonded mica splittings * Manufacture of articles of mica * on a support of paper or fabric ex 70.10 * Cut-glass bottles * Cutting of bottles the value of which does not * * exceed 50 % of the value of the finished product 70.13 * Glassware ( other than articles falling in heading * Cutting of glassware the value of which does not * No 70.19 ) of a kind commonly used for table , * exceed 50 % of the value of the finished product * kitchen , toilet or office purposes , for indoor * or decoration , with the exception of silk-screen * decoration , or similar uses * printing , carried out entirely by hand , of hand - * * blown glassware the value of which does not exceed * * 50 % of the value of the finished product ex 70.20 * Articles made from glass fibre * Manufacture from unworked glass fibre ex 71.02 * Precious and semi-precious stones , cut or otherwise * Manufacture from unworked precious and semi - * worked , but not mounted , set or strung ( except * precious stones * ungraded stones temporarily strung for convenience * of transport ) ex 71.03 * Synthetic or reconstructed precious or semi-precious * Manufacture from unworked synthetic or * stones , cut or otherwise worked , but not mounted , * reconstructed precious or semi-precious stones * set or strung ( except ungraded stones temporarily * strung for convenience of transport ) ex 71.05 * Silver and silver alloys , including silver gilt and * Rolling , drawing , beating or grinding of unwrought * platinum-plated silver , semi-manufactured * silver and silver alloys ex 71.05 * Silver , including silver gilt and platinum-plated * Alloying or electrolytic separation of unwrought * silver , unwrought * silver and silver alloys ex 71.06 * Rolled silver , semi-manufactured * Rolling , drawing , beating or grinding of unwrought * * rolled silver ex 71.07 * GoLd , * factured * gold , including platinum-plated gold ex 71.07 * Gold , including platinum-plated gold , unwrought * Alloying or electrolytic separation of unwrought * * gold or gold alloys ex 71.08 * Rolled gold on base metal or silver , semi-manu - * Rolling , drawing , beating or grinding of unwrought * factured * rolled gold on base metal or silver ex 71.09 * Platinum and other metals of the platinum group , * Rolling , drawing , beating or grinding of unwrought * semi-manufactured * platinum or other metals of the platinum group ex 71.09 * Platinum and other metals of the platinum group , * Alloying or electrolytic separation of unwrought * unwrought * platinum or other metals of the platinum group ex 71.10 * Rolled platinum or other platinum group metals , * Rolling , drawing , beating or grinding of unwrought * on base metal or precious metal , semi-manufactured * rolled platinum or other unwrought platinum group * * metals or precious metal ex 73.15 * Alloy steel and high carbon steel : * _ in the forms mentioned in heading Nos 73.07 * Manufacture from products in the forms mentioned * to 73.13 * in heading No 73.06 * _ in the forms mentioned in heading No 73.14 * Manufacture from products in the forms mentioned * * in heading No 73.06 or 73.07 ex 74.01 * Unrefined copper ( blister copper and other ) * Smelting of copper matte ex 74.01 * Refined copper * Fire-refining or electrolytic of unrefined * * copper ( blister copper and other ) , copper waste or * * scrap ex 74.01 * Copper alloy * Fusion and thermal treatment of refined copper , * * copper waste or scrap ex 75.01 * Unwrought nickel ( excluding electro-plating anodes * Refining by electrolysis , by fusion or chemically , * of heading No 75.05 ) * of nickel mattes , nickel speiss and other * * intermediate products of nickel metallurgy ex 75.01 * Unwrought nickel except nickel alloys * Refining of waste by electrolysis , by melting or * * by chemical means of waste and scrap Finished products * Working or processing that confers the status of originating * * products CCT * Description heading No ex 76.01 * Unwrought aluminium * Manufacture by thermal or electrolytic treatment * * of unalloyed aluminium and scrap ex 77.04 * Beryllium wrought * Rolling , drawing or grinding of unwrought beryl - * * lium the value of which does not exceed 50 % of * * the value of the finished product ex 78.01 * Refined lead * Manufactured by thermal refining from bullion lead ex 81.01 * Tungsten , wrought * Manufacture from unwrought tungsten the value * * of which does not exceed 50 % of the value of the * * finished product ex 81.02 * Molybdenum , wrought * Manufacture from unwrought molybdenum the * * value of which does not exceed 50 % of the value * * of the finished product ex 81.03 * Tantalum , wrought * Manufacture from unwrought tantalum the value * * of which does not exceed 50 % of the value of the * * finished product ex 81.04 * Other base metals , wrought * Manufacture from other base metals , unwrought * * the value of which does not exceed 50 % of the * * value of the finished product ex 83.06 * Indoor ornaments made from base metals other * Working or processing in which the value of the * than statuettes * non-originating materials used does not exceed * * 30 % of the value of the finished product 84.06 * Internal combustion piston engines * Working , processing or assembly in which the * * value of the materials and parts used does not * * exceed 40 % of the value of the finished product ex 84.08 * Engines and motors , excluding reaction engines * Working , processing or assembly in which the * and gas turbines * value of the non-originating materials and parts * * used does not exceed 40 % of the value of the * * finished product , and provided that at least 50 % * * in value of the materials and parts ( 1 ) used are * * originating products 84.16 * Calendering and similar rolling machines ( other * Working , processing or assembly in which the * than metal-working and metal-rolling machines * value of the non-originating materials and parts * and glass working machines ) and cylinders thereof * used does not exceed 25 % of the value of the * * finished product ( 1 ) In determining the value of products , materials and parts , the following must be taken into account : ( a ) in respect of originating products , materials and parts , the first verifiable price paid , or the price which would be paid in case of sale , for the said products on the territory of the country where working , processing or assembly is carried out ; ( b ) in respect of other products , materials and parts , the provisions of Article 4 of this Protocol determining : ( i ) the value of imported products , ( ii ) the value of products of undetermined origin . Finished products * Working or processing that confers the status of originating * * products CCT * Description heading No ex 84.17 * Machinery , plant and similar laboratory equipment , * Working , processing or assembly in which the * whether or not electrically heated , for the treatment * value of the non-originating materials and parts * of materials by a process involving a change of * used does not exceed 25 % of the value of the * temperature , for wood , paper pulp , paper and * finished product * paperboard manufacturing industries 84.31 * Machinery for making or finishing cellulosic pulp , * Working , processing or assembly in which the * paper or paperboard * value of the non-originating materials and parts * * used does not exceed 25 % of the value of the * * finished product 84.33 * Paper or paperboard cutting machines of all kinds ; * Working , processing or assembly in which the * other machinery for making up paper pulp , paper * value of the non-originating materials and parts * or paperboard * used does not exceed 25 % of the value of the * * finished product ex 84.41 * Sewing machines , including furniture specially * Working , processing or assembly in which the * designed for sewing machines * value of the non-originating materials and parts * * used does not exceed 40 % of the value of the * * finished product , and provided that : * * ( a ) at least 50 % of the materials and parts ( 1 ) used * * for assembly of the head ( motor excluded ) are * * originating products , and * * ( b ) the thread tension , crochet and zigzag * * mechanisms are originating products 85.14 * Microphones and stands therefor ; loudspeakers ; * Working , processing or assembly in which the * audiofrequency electric amplifiers * value of the non-originating materials and parts * * used does not exceed 40 % of the value of the * * finished product and provided that at least 50 % of * * the materials and parts used are originating * * products ( 2 ) 85.15 * Radiotelegraphic and radiotelephonic transmission * Working , processing or assembly in which the value * and reception apparatus ; radio , broadcasting and * of the non-originating materials and parts used * television transmission and reception apparatus * does not exceed 40 % of the value of the finished * ( including receivers incorporating sound recorders * product and provided that at least 50 % of the * or reproducers ) and television cameras ; radio * materials and parts used are originating products ( 2 ) * navigational aid apparatus , radar apparatus and * radio remote control apparatus 87.06 * Parts and accessories of the motor vehicles of * Working , processing or assembly in which the value * heading Nos 87.01 to 87.03 * of the materials and parts used does not exceed * * 15 % of the value of the finished product ( 1 ) In determining the value of products , materials and parts , the following must be taken into account : ( a ) in respect of originating products , materials and parts , the first verifiable price paid , in case of sale , for the said products in the territory of the country where working , processing or assembly is carried out ; ( b ) in respect of products , materials and parts , other than those referred to under ( a ) , the provisions of Article 4 of this Protocol determining : ( i ) the value of imported products , ( ii ) the value of products of undetermined origin . ( 2 ) The application of this rule must not have the effect of allowing the exceeding of the percentage of 3 % for the originating transistors laid down in List A for the same tariff heading . Finished products * Working or processing that confers the status of originating * * products CCT * Description heading No ex 94.01 * Chairs and other seats ( other than those falling * Working , processing or assembly in which * within heading No 94.02 ) whether or not * unstuffed cotton cloth is used of a weight of * convertible into beds , made of base metals * 300 g / m2 or less in the form ready to use , of * * which the value does not exceed 25 % of the value * * of the finished product ( 1 ) ex 94.03 * Other furniture of base metal * Working , processing or assembly in which unstuffed * * cotton cloth is used of a weight of 300 g / m2 or * * less in the form ready to use of which the value * * does not exceed 25 % of the value of the finished * * product ( 1 ) ex 95.01 * Articles of tortoise-shell * Manufacture from worked tortoise-shell ex 95.02 * Articles of mother of pearl * Manufacture from worked mother of pearl 95.03 * Articles of ivory * Manufacture from worked ivory ex 95.04 * Articles of bone ( excluding whalebone ) * Manufacture from worked bone ( excluding * * whalebone ) ex 95.05 * Articles of horn , coral ( natural or agglomerated ) * Manufacture from worked horn , coral ( natural or * or of other animal carving material * agglomerated ) or other animal carving material ex 95.06 * Articles of vegetable carving material ( for example , * Manufacture from worked vegetable carving * corozo ) * material ( for example , corozo ) ex 95.07 * Articles of jet ( and mineral substitutes for jet ) , * Manufacture from worked jet ( and mineral * amber , meerschaum , agglomerated amber and * substitutes for jet ) , amber , meerschaum , agglomer - * agglomerated meerschaum * ated amber and agglomerated meerschaum ex 98.11 * Smoking pipes , pipe bowls , of wood , root or other * Manufacture from roughly shaped blocks * materials ( 1 ) This rule does not apply when the general rule of change of tariff heading is applied to the other non-originating parts which are part of the composition of the final product . ANNEX IV LIST C List of products excluded from the scope of this Protocol CCT * Description heading No ex 27.07 * Assimilated aromatic oils as defined in Note 2 to Chapter 27 , of which * more than 65 % by volume distils at a temperature of up to 250 * C * ( including mixtures of petroleum spirit and benzole ) , for use as power * or heating fuels 27.09 ) * Mineral oils and products of their distillation ; bituminous substances ; to ) * mineral waxes 27.16 ) ex 29.01 * Hydrocarbons : * _ acyclic * _ cyclanes and cyclenes , excluding azulenes * _ benzene , toluene , xylenes * for use as power or heating fuels ex 34.03 * Lubricating preparations containing petroleum oils or oils obtained from * bituminous minerals , but not including preparations containing 70 % or * more by weight of petroleum oils or of oils obtained from bituminous * minerals ex 34.04 * Waxes with a basis of paraffin , of petroleum waxes , of waxes obtained * from bituminous minerals , of slacks wax of scale wax ex 38.14 * Prepared additives for lubricants ANNEX V MOVEMENT CERTIFICATE 1 . Exporter ( Name , full address , country ) * EUR . 1 No A 000.000 * See notes overleaf before completing this form * 2 . Certificate used in preferential trade between 3 . Consignee ( Name , full address , country ) ( Optional ) * ... * and * ... * ( insert appropriate countries , groups of countries or territories ) * 4 . Country , group of * 5 . Country , group of * countries or territory * countries or territory * in which the products * of destination * are considered as * originating ( 1 ) 6 . Transport details ( Optional ) * 7 . Remarks 8 . Item number ; marks and numbers ; Number and kind of packages ( 2 ) ; * 9 . Gross * 10 . Invoices Description of goods * weight ( kg ) * ( Optional ) * or other mea - * sure ( litres , * m3 , etc . ) 11 . CUSTOMS ENDORSEMENT * 12 . DECLARATION BY THE EXPORTER Declaration certified * I , the undersigned , declare that the goods * Stamp * described above meet the conditions re - Export document ( 3 ) * quired for the issue of the attached certificate . Form ... No ... Customs office ... Issuing country or territory ... * Place and date : ... ... ... Date ... ... * ... ( Signature ) * ( Signature ) ( 1 ) Complete only in cases of exporting country not being identical to the country where the product are originating . In the contrary case , this box has to be struck through . ( 2 ) If goods are not packed , indicate number of articles or state " in bulk " as appropriate . ( 3 ) Complete only where the regulations of the exporting country or territory require . 13 . REQUEST FOR VERIFICATION , to * 14 . RESULT OF VERIFICATION , * Verification carried out shows that this certificate ( 1 ) * was issued by the customs office indicated and that * the information contained therein is accurate . * does not meet the requirements as to authenticity * and accuracy ( see remarks appended ) . Verification of the authenticity and accuracy of this certi - ficate is requested . ... * ... ( Place and date ) * ( Place and date ) Stamp * Stamp ... * ... ( Signature ) * ( Signature ) * ( 1 ) Insert X in the appropriate box . NOTES 1 . Certificates must not contain erasures or words written over one another . Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections . Any such alteration must be initialled by the person who completed the certificate and endorsed by the customs authorities of the issuing country or territory . 2 . No spaces must be left between the items entered on the certificate and each item must be preceded by an item number . A horizontal line must be drawn immediately below the last item . Any unused space must be struck through in such a manner as to make any later additions impossible . 3 . Goods must be described in accordance with commercial practice and with sufficient detail to enable them to be identified . APPLICATION FOR A MOVEMENT CERTIFICATE 1 . Exporter ( Name , full address , country ) * EUR . 1 No A 000.000 * See notes overleaf before completing this form * 2 . Application for a certificate to be used in preferential * trade between 3 . Consignee ( Name , full address , country ) ( Optional ) * ... * and ... * ( insert appropriate countries , groups of countries or territories ) * 4 . Country , group of * 5 . Country , group of * countries or territory * countries or territory * in which the products * of destination * are considered as * originating ( 1 ) 6 . Transport details ( Optional ) * 7 . Remarks 8 . Item number ; marks and numbers ; Number and kind of packages ( 2 ) ; * 9 . Gross * 10 . Invoices Description of goods * weight ( kg ) * ( Optional ) * or other mea - * sure ( litres , * m3 , etc . ) ( 1 ) Complete only in cases of exporting country not being identical to the country where the products are originating . In the contrary case , this box has to be struck through . ( 2 ) If goods are not packed , indicate number of articles or state " in bulk " as approriate . DECLARATION BY THE EXPORTER I , the undersigned , exporter of the goods described overleaf , DECLARE that the goods meet the conditions required for the issue of the attached certificate ; SPECIFY as follows the circumstances which have enabled these goods to meet the above conditions : ... SUBMIT the following supporting documents ( 1 ) : ... UNDERTAKE to submit , at the request of the appropriate authorities , any supporting evidence which these authorities may require for the purpose of issuing the attached certificate , and undertake , if required , to agree to any inspection of my accounts and to any check on the processes of manufacture of the above goods , carried out by the said authorities ; REQUEST the issue of the attached certificate for these goods . ... ( Place and date ) ... ( Signature ) ( 1 ) For example : import documents , movement certificates , invoices , manufacturer's declarations , etc . , referring to the products used in manufacture or to the goods re-exported in the same state . ANNEX VI REQUEST FOR VERIFICATION * RESULT OF VERIFICATION The undersigned customs officer requests that the declaration by * Verification carried out by the undersigned customs officer the exporter on the front of this form be verified ( * ) * shows that : * the statements and particulars given in this form are * accurate ( 1 ) . * this form does not meet the requirements as to authen - * ticity and accuracy ( see remarks appended ) ( 1 ) ... * ... ( Place and date of signature ) * ( Place and date of signature ) Official * Official stamp * stamp ... * ... ( Signature of customs officer ) * ( Signature of customs officer ) * ( 1 ) Place an x where applicable ( * ) Verification of the form is made on a sampling basis or whenever the customs authorities of the importing country have reasonable doubt as to the true origin of the goods in question or of constituents thereof . The customs authorities of the importing country must send the form to the authorities of the exporting country responsible for verification , specifying the reasons of substance of form which justify an inquiry . Whenever possible they must attach to the form the invoice submitted to them or a copy thereof , and give any information which it has been possible to obtain and which suggests that the particulars given in the form are inaccurate . If the customs authorities of the importing country decide to suspend the provisions of the Agreement while waiting the results of the verification , they shall offer to release the goods to the imported subject to such safeguards as may be considered necessary . FORM EUR . 2 No A 000 000 ( Part 1 ) 1 Name and address of exporter * 2 Declaration by the exporter * I , the undersigned , exporter of the goods described below and contained in this postal arrangement , * _ DECLARE that the goods are situated in * exporting country * under the conditions necessary for completion of this form in accordance * with the provisions governing trade between ( 1 ) * and that the goods have the status of originating products within the * meaning of the said provisions . 3 Name and address of consignee * _ UNDERTAKE to submit to the appropriate authorities any supporting * evidence which these authorities may require and to agree to any inspection * by them of my accounts and any check by them on the process of * manufacture of the goods describe below . * 4 Place and date * 6 Signature of exporter 5 Remarks ( 2 ) * 7 Country , group of coun - * 8 Country of destination * tries or territory in which * the products are considered * as originating ( 3 ) * 9 Gross weight 10 Description of goods * 11 Authorities in the exporting country responsible * for verification of the declaration by the * exporter ( 1 ) ( 2 ) ( 3 ) ( See footnotes on back of part 1 ) . FORM EUR . 2 No A 000 000 ( Part 2 ) 1 Name and address of exporter * 2 Declaration by the exporter * I , the undersigned , exporter of the goods described below and contained * in this postal consignment , * _ DECLARE , that the goods are situated in * ( exporting country ) * under the conditions necessary for completion of this form in accordance * with the provisions converting trade between ... ( 1 ) ; * and that the goods have the status of originating products within the * measures of the said provisions ; 3 Name and address of consignee * _ UNDERTAKE to submit to the appropriate authorities any supporting * evidence which these authorities may require and to agree to any inspection * by them of my accounts and any check by them on the processes of manufacture of the goods described below . * 4 Place and date * 6 Signature of exporter 5 Remarks ( 2 ) * 7 Country , group of coun - * 8 Country of destination * tries or territory in which * the products are considered * as originating ( 3 ) * 9 Gross weight 10 Description of goods * 11 Authorities in the exporting country responsible * for verification of the declaration by the * exporter ( 1 ) ( 2 ) ( 3 ) ( See footnotes of part 1 ) . Footnotes for both forms ( 1 ) Indicate the Contracting Parties to the transaction in respect of which the form has been completed . ( 2 ) Refer to any verification already carried out by the appropriate authorities . ( 3 ) Complete only in cases of exporting country not being identical to the country where the products are originating . In the contrary case , this box has to be struck through . Instructions for the completion of form EUR . 2 A . A form EUR . 2 may be made out only for goods which in the exporting country meet the conditions specified by the provisions governing the trade referred to in space 2 , Those provisions must be studied carefully before the form is completed , B . The exporter must give the reference " EUR . 2 " followed by the serial number of the form either on green label C 1 or on customs declaration C 2/CP 3 , C . After completing and signing the two parts of the form , the exporter must , _ in the case of a consignment by parcel post , attach the two parts to the dispatch note , _ in the case of a consignment by letter post , attach Part 1 firmly to the consignment and insert Part 2 inside it . ANNEX VII SPECIMEN OF DECLARATION I , the undersigned , declare that the goods listed on this invoice were obtained in ... ( indicate the State ( s ) partner to the Convention in which the products were obtained ) and ( as appropriate ) : ( a ) ( * ) satisfy the rules on the definition of the concept of " wholly produced products " or ( b ) ( * ) were produced from the following products : Description Country of origin Value ( * ) ... ... ... and have undergone the following processes : ... ( indicate processings ) in ... ( indicate the State ( s ) partner to the Convention in which the products were obtained ) ... ... ( Place and date ) ( Signature ) ( * ) To be completed as necessary . ANNEX VIII EUROPEAN COMMUNITIES 1 . Supplier ( 1 ) * INFORMATION CERTIFICATE * to facilitate the issue of a * MOVEMENT CERTIFICATE * for preferential trade between the 2 . Consignee ( 1 ) * * EUROPEAN ECONOMIC * * COMMUNITY * * and THE ACP STATES 3 . Processor ( 1 ) * 4 . State in which the working or processing has been * carried out 6 . Customs office of importation ( 2 ) * 5 . For official use 7 . Import document ( 2 ) Form ... No ... Series ... Date GOODS SENT TO THE MEMBER STATE OF DESTINATION 8 . Marks , numbers , * 9 . Tariff heading number and description of goods * 10 . Quantity ( 3 ) quantity and kind of package * * 11 . Value ( 4 ) IMPORTED GOODS USED 12 . Tariff heading number and description * 13 . Country of * 14 . Quantity ( 3 ) * 15 . Value ( 2 ) ( 5 ) * origin 16 . Nature of the working or processing carried out 17 . Remarks 18 . CUSTOMS ENDORSEMENT * 19 . DECLARATION BY THE SUPPLIER Declaration certified * I , the undersigned , declare that the information on * this certificate is accurate Document ... Form ... No ... ... ( Place ) ( date ) Customs office ... Date Official stamp ... * ... ( Signature ) * ( Signature ) ( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) See footnotes on verso . REQUEST FOR VERIFICATION * RESULT OF VERIFICATION The undersigned customs official requests verification of the * Verification carried out by the undersigned customs official authenticity and accuracy of this information certificate * shows that this information certificate : * ( a ) was issued by the customs office indicated and that the * information contained therein is accurate ( * ) * ( b ) does not meet the requirements as to authenticity and * accuracy ( see notes appended ) ( * ) ... * ... ( Place and date ) * ( Place and date ) Official * Official stamp * stamp ... * ... ( Official's signature ) * ( Official's signature ) * ( * ) Delete where not applicable . CROSS REFERENCES ( 1 ) Name of individual or business and full address . ( 2 ) Optional information . ( 3 ) Kg , hl , m3 or other measure . ( 4 ) Packaging shall be considered as forming a whore with the goods contained therein . However , this provision shall not apply to packaging which is not of the normal type for the article packed , and which has a lasting utility value of its own , apart from its function is packaging . ( 5 ) The value must be indicated in accordance with the provisions on rules of origin . ANNEX IX Joint Declarations 1 . For the purposes of applying Article 5 ( 2 ) ( c ) of this Protocol , the certificate of sea transport , issued in the first port of embarkation , shall be equivalent to the through bill of lading for products covered by movement certificates issued in landlocked ACP States . 2 . Products exported from landlocked ACP States which are warehoused elsewhere than in the ACP States or the countries and territories referred to in Explanatory Note No 9 may be the subject of movement certificates issued under the circumstances referred to in Article 7 ( 2 ) . 3 . For the purpose of Article 7 ( 1 ) of this Protocol , certificates EUR . 1 issued by a competent authority and endorsed by the customs authorities will be accepted . 4 . For the implementation of Article 27 of this Protocol , the Community is prepared to examine any request of the ACP States in order to bring derogations to this Protocol in favor of the industries concerned . This examination shall be held in an appropriate institutional framework , from the date of signature of the Convention , with a view to allowing the derogations to enter into force at the same date as the Convention . 5 . In particular , account shall be taken on a case-by-case basis of the possibility of conferring originating status on products which include products originating in neighbouring developing countries or in developing countries with which one or more ACP States have special relationships , provided that satisfactory administrative co-operation can be established .