EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 02019D1616-20200420

Consolidated text: Commission Implementing Decision (EU) 2019/1616 of 27 September 2019 on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council

ELI: http://data.europa.eu/eli/dec_impl/2019/1616/2020-04-20

02019D1616 — EN — 20.04.2020 — 001.001


This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document

►B

COMMISSION IMPLEMENTING DECISION (EU) 2019/1616

of 27 September 2019

on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council

(OJ L 250 30.9.2019, p. 95)

Amended by:

 

 

Official Journal

  No

page

date

►M1

COMMISSION IMPLEMENTING DECISION (EU) 2020/542 of 16 April 2020

  L 121

4

20.4.2020




▼B

COMMISSION IMPLEMENTING DECISION (EU) 2019/1616

of 27 September 2019

on the harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU of the European Parliament and of the Council



Article 1

The references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.

Article 2

The references of harmonised standards for pressure equipment drafted in support of Directive 2014/68/EU, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union as from the dates set out in that Annex.

Article 3

This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.




ANNEX I



No

Reference of the standard

1.

EN 1562:2019

Founding — Malleable cast irons

2.

EN 1563:2018

Founding — Spheroidal graphite cast irons

3.

EN ISO 4126-2:2019

Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices (ISO 4126-2:2018)

4.

EN 12516-1:2014+A1:2018

Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells

5.

EN 12516-4:2014+A1:2018

Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel

6.

EN 13136:2013+A1:2018

Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation

7.

EN 13445-2:2014

Unfired pressure vessels — Part 2: Materials

EN 13445-2:2014/A1:2016

EN 13445-2:2014/A2:2018

EN 13445-2:2014/A3:2018

▼M1

8.

EN 13445-3:2014

Unfired pressure vessels – Part 3: Design

EN 13445-3:2014/A1:2015

EN 13445-3:2014/A2:2016

EN 13445-3:2014/A3:2017

EN 13445-3:2014/A4:2018

EN 13445-3:2014/A5:2018

EN 13445-3:2014/A6:2019

EN 13445-3:2014/A7:2019

EN 13445-3:2014/A8:2019

▼B

9.

EN 13445-5:2014

Unfired pressure vessels — Part 5: Inspection and testing

EN 13445-5:2014/A1:2018

10.

EN 13445-6:2014

Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

EN 13445-6:2014/A2:2018

11.

EN 13480-2:2017

Metallic industrial piping — Part 2: Materials

EN 13480-2:2017/A1:2018

EN 13480-2:2017/A2:2018

EN 13480-2:2017/A3:2018

12.

EN 13480-5:2017

Metallic industrial piping — Part 5: Inspection and testing

EN 13480-5:2017/A1:2019

13.

EN ISO 15494:2018

Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system (ISO 15494:2015)

14.

EN ISO 21028-2:2018

Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between – 80 degrees C and – 20 degrees C (ISO 21028-2:2018)

▼M1

15.

EN ISO 4126-1:2013

Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013)

EN ISO 4126-1:2013/A2:2019

16.

EN 10217-1:2019

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties

17.

EN 10217-2:2019

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties

18.

EN 10217-3:2019

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties

19.

EN 10217-4:2019

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties

20.

EN 10217-5:2019

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties

21.

EN 10217-6:2019

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties

22.

EN 13480-1:2017

Metallic industrial piping – Part 1: General

EN 13480-1:2017/A1:2019

23.

EN 13480-6:2017

Metallic industrial piping – Part 6: Additional requirements for buried piping

EN 13480-6:2017/A1:2019

▼B




ANNEX II



No

Reference of the standard

Date of withdrawal

1.

EN 13445-2:2014

Unfired pressure vessels — Part 2: Materials

EN 13445-2:2014/A1:2016

EN 13445-2:2014/A2:2018

30 September 2019

2.

EN 13445-3:2014

Unfired pressure vessels — Part 3: Design

EN 13445-3:2014/A1:2015

EN 13445-3:2014/A2:2016

EN 13445-3:2014/A3:2017

EN 13445-3:2014/A4:2018

30 September 2019

3.

EN 13445-5:2014

Unfired pressure vessels — Part 5: Inspection and testing

30 September 2019

4.

EN 13445-6:2014

Unfired pressure vessels — Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

30 September 2019

5.

EN 13480-2:2017

Metallic industrial piping — Part 2: Materials

30 September 2019

6.

EN 13480-5:2017

Metallic industrial piping — Part 5: Inspection and testing

30 September 2019

7.

EN 1252-2:2001

Cryogenic vessels — Materials — Part 2: Toughness requirements for temperatures between – 80 °C and – 20 °C

30 March 2020

8.

EN 1562:2012

Founding — Malleable cast irons

30 March 2020

9.

EN 1563:2011

Founding — Spheroidal graphite cast irons

30 March 2020

10.

EN 12516-1:2014

Industrial valves — Shell design strength — Part 1: Tabulation method for steel valve shells

30 March 2020

11.

EN 12516-4:2014

Industrial valves — Shell design strength — Part 4: Calculation method for valve shells manufactured in metallic materials other than steel

30 March 2020

12.

EN 13136:2013

Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation

30 March 2020

▼M1

13.

EN 10217-1:2002

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Non-alloy steel tubes with specified room temperature properties

EN 10217-1:2002/A1:2005

20 April 2021

14.

EN 10217-2:2002

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties

EN 10217-2:2002/A1:2005

20 April 2021

15.

EN 10217-3:2002

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Alloy fine grain steel tubes

EN 10217-3:2002/A1:2005

20 April 2021

16.

EN 10217-4:2002

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties

EN 10217-4:2002/A1:2005

20 April 2021

17.

EN 10217-5:2002

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties

EN 10217-5:2002/A1:2005

20 April 2021

18.

EN 10217-6:2002

Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties

EN 10217-6:2002/A1:2005

20 April 2021

19.

EN 13480-1:2017

Metallic industrial piping – Part 1: General

20 April 2020

20.

EN 13480-6:2017

Metallic industrial piping – Part 6: Additional requirements for buried piping

20 April 2020

21.

EN ISO 4126-1:2013

Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013)

20 April 2020

Top