This document is an excerpt from the EUR-Lex website
Document 02019D0450-20240711
Commission Implementing Decision (EU) 2019/450 of 19 March 2019 on publication of the European Assessment Documents (EADs) for construction products drafted in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council (Text with EEA relevance)
Consolidated text: Commission Implementing Decision (EU) 2019/450 of 19 March 2019 on publication of the European Assessment Documents (EADs) for construction products drafted in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council (Text with EEA relevance)
Commission Implementing Decision (EU) 2019/450 of 19 March 2019 on publication of the European Assessment Documents (EADs) for construction products drafted in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council (Text with EEA relevance)
02019D0450 — EN — 11.07.2024 — 012.001
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
|
COMMISSION IMPLEMENTING DECISION (EU) 2019/450 of 19 March 2019 on publication of the European Assessment Documents (EADs) for construction products drafted in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council (OJ L 077 20.3.2019, p. 78) |
Amended by:
COMMISSION IMPLEMENTING DECISION (EU) 2019/450
of 19 March 2019
on publication of the European Assessment Documents (EADs) for construction products drafted in support of Regulation (EU) No 305/2011 of the European Parliament and of the Council
(Text with EEA relevance)
Article 1
The references of the European Assessment Documents for construction products drafted in support of Regulation (EU) No 305/2011 that are listed in Annex to this Decision are hereby published in the Official Journal of the European Union.
Article 2
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
ANNEX
Reference and title of the European Assessment Document
|
020062-00-1102 |
Internal fire resisting and/or smoke control single and double leaf doorsets made of special steel-frame profiles |
|
030016-00-0402 |
Corrugated bitumen tiles and sheets |
|
030218-01-0402 |
Membranes for use as roof or wall underlays or both (superseding technical specification ‘EAD 030218-00-0402’) |
|
030219-00-0501 |
Acoustic spray coating based on a water-based organic binder |
|
030271-00-0605 |
Humidity-dependent vapour control layers |
|
030295-00-0605 |
Flexible polymer modified mineral thick coatings |
|
030350-00-0402 |
Liquid applied roof waterproofing kits (superseding technical specification ‘ETAG 005’) |
|
030351-00-0402 |
Systems of mechanically fastened flexible roof waterproofing sheets (superseding technical specification ‘ETAG 006’) |
|
030352-00-0503 |
Liquid applied watertight covering kits for wet room floors and/or walls (superseding technical specification ‘ETAG 022-1’) |
|
030378-00-0605 |
Fully bonded, pre-applied flexible sheet for waterproofing |
|
030400-00-0605 |
Waterproofing kit based on polymeric membranes for in- and outdoor walls and floors of wet areas and swimming pools |
|
030436-00-0503 |
Watertight covering kits based on flexible sheets for wet room floors and/or walls (superseding technical specification ‘ETAG 022-2’) |
|
030437-00-0503 |
Watertight covering kits based on inherently watertight boards for wet room floors and/or walls (superseding technical specification ‘ETAG 022-3’) |
|
030588-00-1202 |
Three-layer polyethylene-based coating for corrosion protection of steel pipes |
|
030675-00-0107 |
Liquid applied bridge deck waterproofing kits |
|
040016-01-0404 |
Glass fibre mesh for reinforcement of cementitious or cement-based renderings (superseding EAD 040016-00-0404) |
|
040036-00-0501 |
Mineral pre-coated ceiling panels |
|
040049-01-0502 |
Polyurethane (PU) foam mat or polyester fibre mat to be used for impact sound insulation (superseding technical specification ‘EAD 040049-00-0502’) |
|
040057-01-1201 |
Thermal insulation board made of microporous silica (superseding technical specification ‘EAD 040057-00-1201’) |
|
040083-00-0404 |
External Thermal Insulation Composite Systems (ETICS) with renderings (superseding technical specification ‘ETAG 004’) |
|
040146-00-1201 |
Thermal insulation for buildings made of straw bales |
|
040369-01-1201 |
Insulation made of loose-fill or compound granulated expanded cork or loose-fill granulated natural cork and rubber (superseding technical specification ‘EAD 040369-00-1201’) |
|
040419-00-1201 |
Thermal insulation board made of pressed rigid polyurethane foam |
|
040427-00-0404 |
Kits for external thermal insulation composite system (ETICS) with mortar as thermal insulation product and renderings or discontinuous claddings as exterior skin |
|
040465-00-0404 |
ETICS with renderings on mono-layer or multi-layer wall made of timber |
|
040685-00-1201 |
Factory-made insulation mats made of glass fibres and amorphous silica |
|
040708-00-0402 |
Impact sound insulation mat with additional function of rainwater drainage and protection of external waterproofing layers |
|
040729-00-1201 |
Thermal insulation made of loose fill mineral wool |
|
040759-00-0404 |
External thermal insulation composite system (ETICS) with rendering on boards based on polystyrene cement |
|
040831-00-1201 |
Factory-made bonded foam to be used as acoustic and thermal insulation |
|
040868-00-0404 |
Rigid polyurethane foam elements for fastening attachment parts to external walls |
|
040914-00-0404 |
Veture kits – Prefabricated units for external wall insulation and their fixing devices (superseding technical specification ‘ETAG 017’) |
|
041094-00-1201 |
Open-cell factory-made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products for building equipment and industrial installations |
|
041125-00-1201 |
In-situ loose fill thermal and/or acoustic insulation products made of vegetable fibres to be used in floor constructions without additional load-bearing structures |
|
041369-00-1201 |
Insulating boards made of recycled polyurethane to be used as acoustic and thermal insulation |
|
041389-00-1201 |
Boards made of agglomerated natural cork for thermal and acoustic insulation |
|
041499-00-1201 |
Kit of polyurethane elements for thermal insulation frame around windows made of unplasticized polyvinyl chloride profiles |
|
041559-00-1201 |
Thermal insulation and sound absorbing rendering/plastering |
|
041561-00-1201 |
In-situ formed thermal insulation made of mineral based foam |
|
050003-00-0301 |
Pot bearings with special internal sealing for increased action effects |
|
050019-00-0301 |
Dowels for structural joints under static and quasi-static loading (superseding technical specification ETAG 030) |
|
060009-00-0802 |
Kit for system stove - chimney consisting of chimney kit with clay/ceramic flue liner and integrated stove unit |
|
060011-00-0802 |
Sootfire resistant chimney kits with clay/ceramic flue liner, working under wet conditions and negative/positive pressure (superseding technical specifications ‘060001-00-0802, 060003-00-0802 and 060008-00-0802’) |
|
060012-00-0802 |
Kit consisting of chimney flue liner, made of glass fibres, mineral and organic substances, and ancillaries |
|
060012-01-0802 |
Kits consisting of chimney flue liner, made of glass fibres, mineral and organic substances, additional components and ancillaries (superseding technical specification ‘EAD 060012-00-0802’) |
|
060013-00-0802 |
Kit for system chimneys with outer wall made of concrete and clay/ceramic flue liner in combination with plastic or metal flue liner and additional duct |
|
060014-00-0802 |
Construction product for penetration of walls and floors by components for conveying products of combustion |
|
060015-00-0802 |
Chimney kits with clay or ceramic flue liner with increased adjacent thermal insulation or outer walls jointed by polyurethane-based adhesive, or combination of both |
|
070001-02-0504 |
Gypsum plasterboards, gypsum boards with fibrous reinforcement and expanded glass boards with fibrous reinforcement for sheathing and lining of building elements (superseding technical specification ‘EAD 070001-01-0504’) |
|
080009-00-0301 |
Geosynthetic cementitious composite mats and barriers |
|
080013-00-0102 |
Rectangular geogrid for the stabilization of unbound granular layers under applied load |
|
090010-00-0404 |
Bonded glazing kits and bonding sealants |
|
090019-01-0404 |
Kits for external wall claddings of expanded glass granulates boards, magnesium oxide boards or other mineral boards with rendering applied on site (superseding technical specifications ‘EAD 090019-00-0404’ and ‘EAD 090119-00-0404’) |
|
090040-00-0404 |
Cantilevered structural glass railing/balustrade |
|
090062-01-0404 |
Kits for external wall claddings mechanically fixed (superseding technical specification ‘EAD 090062-00-0404’) |
|
090097-00-0404 |
Kits for external wall claddings glued to the subframe |
|
090119-00-0404 |
Kits for external wall cladding of mineral boards with renderings applied in situ |
|
090120-00-0404 |
Kits for non-load bearing mineral board external wall systems |
|
090125-00-0404 |
Kits for external wall claddings with multilayer composite rigid cladding elements |
|
100002-00-1106 |
Early Suppression, Fast Response (ESFR), K240 to 480, Upright and Pendent Automatic Fire Sprinkler |
|
100012-00-1106 |
Flexible sprinkler hose with end fittings |
|
120093-00-0107 |
Flexible asphaltic plug expansion joints for road bridges (superseding technical specification ‘ETAG 032-3’) |
|
120109-00-0107 |
Nosing expansion joints for road bridges (superseding technical specification ‘ETAG 032-4’) |
|
120110-00-0107 |
Mat expansion joints for road bridges (superseding technical specification ‘ETAG 032-5’) |
|
120111-00-0107 |
Cantilever expansion joints for road bridges (superseding technical specification ‘ETAG 032-6’) |
|
120112-00-0107 |
Supported expansion joints for road bridges (superseding technical specification ‘ETAG 032-7’) |
|
120113-00-0107 |
Modular expansion joints for road bridges (superseding technical specification ‘ETAG 032-8’) |
|
130006-00-0304 |
Glued-in rods for timber connections |
|
130018-00-0303 |
Wood-concrete composite slab kits |
|
130031-00-0304 |
Metal web beams and columns |
|
130082-00-0603 |
Façade fixing system - plastic bracket for fixing timber or wood based elements to the substructure |
|
130118-01-0603 |
Screws and threaded rods for use in timber constructions (superseding EAD 130118-00-0603) |
|
130186-00-0603 |
Three-dimensional nailing plates (superseding technical specification ‘ETAG 015’) |
|
130287-00-0603 |
Profiled aluminium nail for use in timber structures |
|
130308-00-0304 |
Structural composite lumber product: Laminated Strand Lumber (LSL) |
|
130320-00-0304 |
Glued laminated timber made of solid hardwood |
|
130321-00-0304 |
Strength graded and finger jointed structural boards with closed finger base – softwood |
|
130323-00-0304 |
Prefabricated wood slab of milled softwood timber to be used as structural elements in buildings |
|
130336-00-0603 |
Point connector – Dovetail made of plywood for cross laminated timber |
|
130348-00-0304 |
Laminated segment timber with rectangular cross section made from radially cut logs |
|
130367-00-0304 |
Composite wood-based beams and columns (superseding technical specification ‘ETAG 011’) |
|
130484-00-0304 |
Tension proof loaded structural finger jointed solid timber which may be processed to glued laminated timber and glued solid timber |
|
130661-00-0304 |
Glued laminated timber with full cross section finger joint |
|
140022-00-0304 |
Prefabricated wood-based loadbearing stressed skin panels (superseding technical specification ‘ETAG 019’) |
|
150001-01-0301 |
Belitic calcium sulphoaluminate and calcium sulphoaluminate based cement (superseding technical specification ‘EAD 150001-00-0301’) |
|
150009-01-0301 |
Blast Furnace Cement CEM III/A with assessment of sulfate resistance (SR) and optional with low effective alkali content (LA) and/or low heat of hydration (LH) (superseding technical specification ‘EAD 150009-00-0301’) |
|
150036-00-0301 |
Fluoraluminate rapid setting cement |
|
160011-00-0301 |
Kit for reinforced concrete members with high strength reinforcing steel but limited tensile utilisation |
|
160012-01-0301 |
Headed reinforcing steel bars (superseding technical specification ‘EAD 160012-00-0301’) |
|
160015-00-0102 |
Kits for construction of a rock and soil anchor – Kits with thread bars of steel or prestressing steel |
|
160031-00-0301 |
Re-bend connection |
|
160055-00-0301 |
Lattice girders for the increase of punching resistance in flat slabs and column |
|
160057-00-0301 |
L- or Z-shaped metal sheets for the increase of punching shear resistance of flat slabs or footings and ground slabs |
|
160071-00-0102 |
Kit for rock and soil anchors using prestressing steel strand |
|
160086-00-0301 |
Kits for the strengthening of concrete elements by externally bonded carbon fibre reinforced polymer strips |
|
160124-00-0301 |
Non-screwable sleeve for mechanical splices by lateral compression of reinforcing bars |
|
160129-00-0301 |
Couplers for mechanical splices of reinforcing steel bars |
|
170005-00-0305 |
Re-cycled clay masonry units |
|
170006-00-0305 |
Aggregate concrete masonry units with specific moisture conversion factor Fm |
|
170010-00-0305 |
Polystyrene concrete masonry units and wall kits made from the units |
|
170011-00-0305 |
Insulating building element for masonry walls |
|
170012-00-0404 |
Building blocks made from bricks and cellular glass core |
|
170018-00-0305 |
Thermally-insulating and loadbearing units made of cellular glass |
|
180002-00-0706 |
Opening and perimeter barriers for flood protection of a building or other structure |
|
180020-00-0704 |
Waterless odour trap for floor drains |
|
180023-00-0704 |
Vertical centrifugal storm water flow regulator |
|
180025-00-0704 |
Prefabricated wastewater treatment plants for at least 51 up to 500 PT |
|
180026-00-0704 |
Vacuum valves for the use in sewage systems |
|
190010-00-0502 |
Underlays made of granulated polyurethane-foam with or without granulated cork |
|
190013-00-0502 |
Thermal and sound insulating dry screed systems with prefabricated flooring elements |
|
190014-00-0503 |
Composite floor coverings for use in external and in internal areas |
|
190019-00-0502 |
Cement-based floor screeds for internal and external applications |
|
190022-00-0503 |
Jointless, ecological flowing screed made of renewable and sustainable raw materials |
|
190026-00-0502 |
Resilient floorings made of ethylene propylene diene-(monomer) and rubber granules |
|
200050-02-0102 |
Gabion boxes, mattresses and sack gabions made of hexagonal regular twisted mesh metallic pre-coated with or without additional organic coating (superseding EAD 200050-01-0102) |
|
200077-00-0103 |
Kits for construction of a micropile – Kits with thread bars |
|
200112-00-0301 |
Steel spring elements |
|
200126-00-0302 |
Corrosion protection systems with tapes wrapped for metallic load-bearing components |
|
200188-00-1202 |
Anti-corrosion paint for steel |
|
200207-00-0302 |
Load-bearing external wall and partition wall kit |
|
210005-00-0505 |
Internal partition kits for use as non-loadbearing walls (superseding technical specification ‘ETAG 003’) |
|
210046-00-1201 |
Thin metal composite sheet |
|
210058-00-0504 |
Wood based composite panels for indoor wall or ceiling design or both |
|
210132-00-0504 |
Fibreboards for non-structural indoor uses made of recycled cellulosic fibres from industrial cellulosic residues |
|
210134-00-1202 |
Soundproofing boards/dry screed and load bearing strips made of corrugated cardboard filled with quartz sand |
|
210138-00-0504 |
Boards made from recycled beverage cartons for use in construction |
|
220009-00-0401 |
Kits for green roofs |
|
220010-01-0402 |
Flat plastic roofing sheets made of recycled plastic for self-supporting and/or fully supported discontinuous roofing and/or external cladding (superseding EAD 220010-00-0402) |
|
220020-00-0402 |
Low bitumen mass shingles, laminated or not, with mineral or synthetic reinforcement |
|
220034-00-0607 |
Roof tile coupling system |
|
220062-00-0401 |
Rooflight with bonded or mechanically fastened cover glass |
|
220078-00-0401 |
Kits for green roofs with green roofing elements made of plastic and its fixing devices |
|
220089-00-0401 |
Self-supporting translucent roof kits with covering made of plastic sheets (superseding technical specification ‘ETAG 010’) |
|
220089-00-0401-v01 |
Self-supporting translucent roof and wall kits with covering made of plastic sheets, including opaque sheets |
|
220106-00-0402 |
Thin steel roof and wall cladding panels |
|
220116-00-0401 |
Fixed fire-resistant roof window |
|
220122-00-0401 |
Ceiling windows and ceiling daylighting devices |
|
220150-00-0401 |
Roof window with integrated balcony element |
|
230064-00-0106 |
Road markings – retro-reflective elements |
|
230145-00-0105 |
Compound for bitumen and bituminous mixtures made of crumb rubber powder |
|
260010-00-0301 |
Fibres for concrete – steel fibres recovered from end-of-life tyres |
|
260014-00-0301 |
Calcined layer silicate based type II addition |
|
260017-00-0301 |
Elastic micro hollow spheres as concrete admixture |
|
260020-00-0301 |
Calcium carbonate fine as active addition with catalytic binding performance for concrete |
|
260023-00-0301 |
Carbon, glass, basalt and aramid fibre reinforced polymer bars as reinforcement of structural elements |
|
260024-00-0301 |
Polymer macro fibres reinforced with alkali resistant glass fibre for the use in concrete |
|
260026-00-0301 |
Waterproofing admixture for concrete |
|
260048-00-0301 |
Calcium carbonate filler aggregate with additional characteristics |
|
260067-00-0301 |
Polymer macro fibres reinforced with basalt fibre for the use in concrete |
|
280004-00-0702 |
Flanged balancing valves |
|
280005-00-0702 |
Thermostatic radiator valves |
|
280009-00-0802 |
Plastics piping kits for the transport system of hot and cold water, made of polyethylene of raised temperature resistance (PE-RT) |
|
280017-00-0109 |
Rotationally moulded bunded storage tank made of polyethylene |
|
300002-00-1202 |
Glass panels, tiles and mosaic |
|
300008-00-0404 |
Thermally curved annealed glass and laminated safety glass made of thermally curved annealed glass |
|
300007-00-0404 |
Special mirrors |
|
300010-00-0505 |
Special drawn sheet glass |
|
320014-00-0605 |
Joint sealing profile made of ethylene propylene diene monomer for the sealing of joints in tubbing constructions |
|
330008-03-0601 |
Anchor channels (superseding technical specification ‘EAD 330008-02-0601’) |
|
330012-01-0601 |
Cast-in anchors with internal threaded socket (superseding technical specification ‘EAD 330012-00-0601’) |
|
330076-01-0604 |
Metal injection anchors for use in masonry (superseding technical specification ‘EAD 330076-00-0604’) |
|
330083-03-0601 |
Power-actuated fastener in concrete for redundant non-structural applications (superseding technical specification ‘EAD 330083-02-0601’) |
|
330087-01-0601 |
Systems for post-installed rebar connections with mortar (superseding technical specification ‘EAD 330087-00-0601’) |
|
330196-01-0604-v01 |
Screwed-in plastic anchors for fixing of external thermal insulation composite systems with renderings or insulation products on bottom side of ceilings |
|
330232-01-0601 |
Mechanical fasteners for use in concrete (superseding technical specification ‘EAD 330232-00-0601’) |
|
330232-01-0601 -v01 |
Torque-controlled expansion fasteners for use in concrete with variable working life up to 50 years |
|
330250-00-0601 |
Post-installed fasteners in concrete under fatigue cyclic loading |
|
330284-00-0604 |
Plastic anchors for redundant non-structural systems in concrete and masonry (superseding technical specification ETAG 020) |
|
330387-00-0601 |
Glass fibre-reinforced plastic connectors for use in sandwich and element walls made of concrete |
|
330424-00-0604 |
Screw anchors for autoclaved aerated concrete and lightweight aggregate concrete |
|
330499-01-0601 |
Bonded fasteners for use in concrete (superseding technical specification ‘ETAG 001-5’ and EAD 330499-00-0601) |
|
330499-02-0601 |
Bonded fastener and bonded expansion fasteners for use in concrete (superseding technical specification ‘EAD 330499-01-0601’) |
|
330924-01-0601 |
Cast-in anchor bolts (superseding technical specification ‘EAD 330924-00-0601’) |
|
330965-01-0601 |
Powder-actuated fastener for the fixing of ETICS in concrete (superseding technical specification ‘EAD 330965-00-0601’) |
|
331433-00-0601 |
Injected anchor for thermal insulation boards |
|
331565-00-0602 |
Wedge lock washers for structural bolting assemblies |
|
331668-00-0601 |
Glass, basalt, aramid, carbon, PBO (polyparaphenylene benzobisoxazole) and steel rovings for fibre-reinforced anchor spikes |
|
331846-00-0603 |
Anchor devices for fastening personal fall protection systems to timber substructures |
|
331924-00-0602 |
Decking fixing assemblies |
|
332001-00-0602 |
Clamping system for connection of precast concrete members |
|
332229-00-0602 |
Stainless steel point fastener for glass claddings |
|
332277-00-0601 |
Fastener for push-pull props for precast wall/column elements |
|
332347-00-0601 |
Connector for strengthening of existing concrete structures by concrete overlay |
|
332347-00-0601-v01 |
Connector for strengthening of existing concrete structures by concrete overlay: behaviour under seismic action |
|
332402-00-0601 |
Post-installed reinforcing bar (rebar) connections with improved bond-splitting behaviour |
|
332589-00-0601 |
Wire loop system for the connection of precast and in-situ concrete elements |
|
332795-00-0601 |
Bonded screw fasteners for use in concrete |
|
333037-00-0602 |
Threaded studs for connection of materials to structural steel and aluminium members |
|
333220-00-0601 |
Pre-installed anchor for fastening concrete façade elements |
|
333256-00-0603 |
Fasteners for fixing external thermal insulation composite systems on timber constructions |
|
340109-00-0106 |
Flexible avalanche protection kit |
|
340179-00-0203 |
Structural panelled building kit |
|
340225-00-1109 |
Plastic chamber systems for underground network access applications installed below manhole tops |
|
340275-00-0104 |
Externally-bonded composite systems with inorganic matrix for strengthening of concrete and masonry structures |
|
340287-00-0203 |
Reinforced high density EPS structural panel system for building units |
|
340297-00-0203 |
Dry masonry construction system with vertical elements |
|
340308-00-0203 |
Timber building kits (superseding technical specification ‘ETAG 007’) |
|
340309-00-0305 |
Non load-bearing permanent shuttering kits/systems based on hollow blocks or panels of insulating materials and sometimes concrete (superseding technical specification ‘ETAG 009’) |
|
340383-00-0203 |
Modular pre-fabricated cemetery construction structure |
|
340392-00-0104 |
CRM (Composite Reinforced Mortar) Systems for strengthening concrete and masonry structures |
|
340452-00-0204 |
Building kit based on massive panels with metal frame structure |
|
350003-01-1109 |
Kit for fire resistant service ducts consisting of pre-fabricated connection pieces (made of steel sheet with an intumescent coating or lining) and accessories (superseding technical specification ‘EAD 350003-00-1109’) |
|
350454-00-1104-v01 |
Combined penetration seals for fire dampers |
|
350865-00-1106 |
Fire retardant products (superseding technical specification ‘ETAG 028’) |
|
360001-01-0803 |
Ventilation system made of mineral wool with facings on outside and inside (superseding technical specification ‘EAD 360001-00-0803’) |
|
360027-00-0101 |
Drainage system used in underground rock caverns |
|
360032-00-0803 |
Liner, made of glass fibres, mineral and organic substances used for relining of ducts for ventilation purposes |