This document is an excerpt from the EUR-Lex website
Document 02009R0428-20210101
Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items (Recast)
Consolidated text: Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items (Recast)
Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items (Recast)
02009R0428 — EN — 01.01.2021 — 012.003
This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document
COUNCIL REGULATION (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items (OJ L 134 29.5.2009, p. 1) |
Amended by:
Corrected by:
COUNCIL REGULATION (EC) No 428/2009
of 5 May 2009
setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items
(Recast)
CHAPTER I
SUBJECT AND DEFINITIONS
Article 1
This Regulation sets up a Community regime for the control of exports, transfer, brokering and transit of dual-use items.
Article 2
For the purposes of this Regulation:
‘dual-use items’ shall mean items, including software and technology, which can be used for both civil and military purposes, and shall include all goods which can be used for both non-explosive uses and assisting in any way in the manufacture of nuclear weapons or other nuclear explosive devices;
‘export’ shall mean:
an export procedure within the meaning of Article 161 of Regulation (EEC) No 2913/92 (the Community Customs Code);
a re-export within the meaning of Article 182 of that Code but not including items in transit; and
transmission of software or technology by electronic media, including by fax, telephone, electronic mail or any other electronic means to a destination outside the European Community; it includes making available in an electronic form such software and technology to legal and natural persons and partnerships outside the Community. Export also applies to oral transmission of technology when the technology is described over the telephone;
‘exporter’ shall mean any natural or legal person or partnership:
on whose behalf an export declaration is made, that is to say the person who, at the time when the declaration is accepted, holds the contract with the consignee in the third country and has the power for determining the sending of the item out of the customs territory of the Community. If no export contract has been concluded or if the holder of the contract does not act on its own behalf, the exporter shall mean the person who has the power for determining the sending of the item out of the customs territory of the Community;
which decides to transmit or make available software or technology by electronic media including by fax, telephone, electronic mail or by any other electronic means to a destination outside the Community.
Where the benefit of a right to dispose of the dual-use item belongs to a person established outside the Community pursuant to the contract on which the export is based, the exporter shall be considered to be the contracting party established in the Community;
‘export declaration’ shall mean the act whereby a person indicates in the prescribed form and manner the wish to place dual-use items under an export procedure;
‘brokering services’ shall mean:
For the purposes of this Regulation the sole provision of ancillary services is excluded from this definition. Ancillary services are transportation, financial services, insurance or re-insurance, or general advertising or promotion;
‘broker’ shall mean any natural or legal person or partnership resident or established in a Member State of the Community that carries out services defined under point 5 from the Community into the territory of a third country;
‘transit’ shall mean a transport of non-Community dual-use items entering and passing through the customs territory of the Community with a destination outside the Community;
‘individual export authorisation’ shall mean an authorisation granted to one specific exporter for one end user or consignee in a third country and covering one or more dual-use items;
‘union general export authorisation’ shall mean an export authorisation for exports to certain countries of destination available to all exporters who respect its conditions and requirements for use as listed in Annexes IIa to IIf;
‘global export authorisation’ shall mean an authorisation granted to one specific exporter in respect of a type or category of dual-use item which may be valid for exports to one or more specified end users and/or in one or more specified third countries;
‘national general export authorisation’ shall mean an export authorisation granted in accordance with Article 9(2) and defined by national legislation in conformity with Article 9 and Annex IIIc;
‘customs territory of the European Union’ shall mean the territory within the meaning of Article 3 of the Community Customs Code;
‘non-Community dual-use items’ shall mean items that have the status of non-Community goods within the meaning of Article 4(8) of the Community Customs Code.
CHAPTER II
SCOPE
Article 3
Article 4
An authorisation shall also be required for the export of dual-use items not listed in Annex I if the purchasing country or country of destination is subject to an arms embargo ►M1 imposed by a decision or a common position ◄ adopted by the Council or a decision of the Organisation for Security and Cooperation in Europe (OSCE) or an arms embargo imposed by a binding resolution of the Security Council of the United Nations and if the exporter has been informed by the authorities referred to in paragraph 1 that the items in question are or may be intended, in their entirety or in part, for a military end-use. For the purposes of this paragraph, ‘military end-use’ shall mean:
incorporation into military items listed in the military list of Member States;
use of production, test or analytical equipment and components therefor, for the development, production or maintenance of military items listed in the abovementioned list;
use of any unfinished products in a plant for the production of military items listed in the abovementioned list.
Article 5
Article 6
Article 7
This Regulation does not apply to the supply of services or the transmission of technology if that supply or transmission involves cross-border movement of persons.
Article 8
CHAPTER III
EXPORT AUTHORISATION AND AUTHORISATION FOR BROKERING SERVICES
Article 9
The competent authorities of the Member State where the exporter is established can prohibit the exporter from using these authorisations if there is reasonable suspicion about his ability to comply with such authorisation or with a provision of the export control legislation.
The competent authorities of the Member States shall exchange information on exporters deprived of the right to use a Union General Export Authorisation, unless they determine that the exporter will not attempt to export dual-use items through another Member State. The system referred to in Article 19(4) shall be used for this purpose.
In order to ensure that only low-risk transactions are covered by the Union General Export Authorisations included in Annexes IIa to IIf, the Commission shall be empowered to adopt delegated acts in accordance with Article 23a to remove destinations from the scope of those Union General Export Authorisations, if such destinations become subject to an arms embargo as referred to in Article 4(2).
Where, in cases of such arms embargoes, imperative grounds of urgency require a removal of particular destinations from the scope of a Union General Export Authorisation, the procedure provided for in Article 23b shall apply to delegated acts adopted pursuant to this paragraph.
For all other exports for which an authorisation is required under this Regulation, such authorisation shall be granted by the competent authorities of the Member State where the exporter is established. Subject to the restrictions specified in paragraph 4, this authorisation may be an individual, global or general authorisation.
All the authorisations shall be valid throughout the Community.
Exporters shall supply the competent authorities with all relevant information required for their applications for individual and global export authorisation so as to provide complete information to the national competent authorities in particular on the end user, the country of destination and the end use of the item exported. The authorisation may be subject, if appropriate, to an end-use statement.
National general export authorisations shall:
exclude from their scope items listed in Annex IIg;
be defined by national law or practice. They may be used by all exporters, established or resident in the Member State issuing these authorisations, if they meet the requirements set in this Regulation and in the complementary national legislation. They shall be issued in accordance with the indications set out in Annex IIIc. They shall be issued according to national law or practice;
Member States shall notify the Commission immediately of any national general export authorisations issued or modified. The Commission shall publish these notifications in the C series of the Official Journal of the European Union;
not be used if the exporter has been informed by his authorities that the items in question are or may be intended, in their entirety or in part, for any of the uses referred to in paragraphs 1 and 3 of Article 4 or in paragraph 2 of Article 4 in a country subject to an arms embargo ►M1 imposed by a decision or a common position ◄ adopted by the Council or a decision of the OSCE or an arms embargo imposed by a binding resolution of the Security Council of the United Nations, or if the exporter is aware that the items are intended for the abovementioned uses.
Member States shall supply the Commission with a list of the authorities empowered to:
grant export authorisations for dual-use items;
decide to prohibit the transit of non-Community dual-use items under this Regulation.
The Commission shall publish the list of these authorities in the C series of the Official Journal of the European Union.
Article 10
Article 11
If the dual-use items in respect of which an application has been made for an individual export authorisation to a destination not listed in ►M1 Annex IIa ◄ or to any destination in the case of dual-use items listed in Annex IV are or will be located in one or more Member States other than the one where the application has been made, that fact shall be indicated in the application. The competent authorities of the Member State to which the application for authorisation has been made shall immediately consult the competent authorities of the Member State or States in question and provide the relevant information. The Member State or States consulted shall make known within 10 working days any objections it or they may have to the granting of such an authorisation, which shall bind the Member State in which the application has been made.
If no objections are received within 10 working days, the Member State or States consulted shall be regarded as having no objection.
In exceptional cases, any Member State consulted may request the extension of the 10-day period. However, the extension may not exceed 30 working days.
Article 12
In deciding whether or not to grant an individual or global export authorisation or to grant an authorisation for brokering services under this Regulation, the Member States shall take into account all relevant considerations including:
the obligations and commitments they have each accepted as members of the relevant international non-proliferation regimes and export control arrangements, or by ratification of relevant international treaties;
their obligations under sanctions imposed by ►M1 a decision or a common position ◄ adopted by the Council or by a decision of the OSCE or by a binding resolution of the Security Council of the United Nations;
considerations of national foreign and security policy, including those covered by Council Common Position 2008/944/CFSP of 8 December 2008 defining common rules governing control of exports of military technology and equipment ( 1 );
considerations about intended end use and the risk of diversion.
Article 13
Article 14
CHAPTER IV
UPDATING OF LIST OF DUAL-USE ITEMS
Article 15
CHAPTER V
CUSTOMS PROCEDURES
Article 16
Without prejudice to any powers conferred on it under, and pursuant to, the Community Customs Code, a Member State may also, for a period not exceeding the periods referred to in paragraph 4, suspend the process of export from its territory, or, if necessary, otherwise prevent the dual-use items listed in Annex I which are covered by a valid export authorisation from leaving the Community via its territory, where it has grounds for suspicion that:
relevant information was not taken into account when the authorisation was granted, or
circumstances have materially changed since the grant of the authorisation.
Article 17
Article 18
The provisions of Articles 843 and 912a to 912g of Regulation (EEC) No 2454/93 shall apply to the restrictions relating to the export, re-export and exit from the customs territory of dual-use items for the export of which an authorisation is required under this Regulation.
CHAPTER VI
ADMINISTRATIVE COOPERATION
Article 19
Member States shall take all appropriate measures to establish direct cooperation and exchange of information between competent authorities with a view to enhance the efficiency of the Community export control regime. Such information may include:
details of exporters deprived, by national sanctions, of the right to use the national general export authorisations or ►M1 Union General Export Authorisations ◄ ;
data on sensitive end users, actors involved in suspicious procurement activities, and, where available, routes taken.
CHAPTER VII
CONTROL MEASURES
Article 20
Exporters of dual-use items shall keep detailed registers or records of their exports, in accordance with the national law or practice in force in the respective Member States. Such registers or records shall include in particular commercial documents such as invoices, manifests and transport and other dispatch documents containing sufficient information to allow the following to be identified:
the description of the dual-use items;
the quantity of the dual-use items;
the name and address of the exporter and of the consignee;
where known, the end-use and end-user of the dual-use items.
Article 21
In order to ensure that this Regulation is properly applied, each Member State shall take whatever measures are needed to permit its competent authorities:
to gather information on any order or transaction involving dual-use items;
to establish that the export control measures are being properly applied, which may include in particular the power to enter the premises of persons with an interest in an export transaction or brokers involved in the supply of brokering services under circumstances set out in Article 5.
CHAPTER VIII
OTHER PROVISIONS
Article 22
A Member State may impose an authorisation requirement for the transfer of other dual-use items from its territory to another Member State in cases where at the time of transfer:
Article 23
A Dual-Use Coordination Group chaired by a representative of the Commission shall be set up. Each Member State shall appoint a representative to this Group.
It shall examine any question concerning the application of this Regulation which may be raised either by the chair or by a representative of a Member State.
Article 23a
Article 23b
Article 24
Each Member State shall take appropriate measures to ensure proper enforcement of all the provisions of this Regulation. In particular, it shall lay down the penalties applicable to infringements of the provisions of this Regulation or of those adopted for its implementation. Those penalties must be effective, proportionate and dissuasive.
Article 25
Special sections of the report shall deal with:
the Dual-Use Coordination Group and its activities. Information that the Commission provides on the Dual-Use Coordination Group’s examinations and consultations shall be treated as confidential pursuant to Article 4 of Regulation (EC) No 1049/2001. Information shall in any case be considered to be confidential if its disclosure is likely to have a significantly adverse effect upon the supplier or the source of such information;
the implementation of Article 19(4), and shall report on the stage reached in the set-up of the secure and encrypted system for the exchange of information between Member States and the Commission;
the implementation of Article 15(1);
the implementation of Article 15(2);
comprehensive information provided on the measures taken by the Member States pursuant to Article 24 and notified to the Commission under paragraph 1 of this Article.
Article 25a
Without prejudice to the provisions on mutual administrative assistance agreements or protocols in customs matters concluded between the Union and third countries, the Council may authorise the Commission to negotiate with third countries agreements providing for the mutual recognition of export controls of dual-use items covered by this Regulation and in particular to eliminate authorisation requirements for re-exports within the territory of the Union. These negotiations shall be conducted in accordance with the procedures established in Article 207(3) of the Treaty on the Functioning of the European Union and the Treaty establishing the European Atomic Energy Community, as appropriate.
Article 26
This Regulation does not affect:
Article 27
Regulation (EC) No 1334/2000 is repealed with effect from 27 August 2009.
However, for export authorisation applications made before 27 August 2009, the relevant provisions of Regulation (EC) No 1334/2000 shall continue to apply.
References to the repealed Regulation shall be construed as references to this Regulation and shall be read in accordance with the correlation table in Annex VI.
Article 28
This Regulation shall enter into force 90 days after the date of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
ANNEX I
LIST OF DUAL-USE ITEMS
(referred to in Article 3 of this Regulation)
This list implements internationally agreed dual-use controls including the Australia Group ( 6 ), the Missile Technology Control Regime (MTCR) ( 7 ), the Nuclear Suppliers Group (NSG) ( 8 ), the Wassenaar Arrangement ( 9 ) and the Chemical Weapons Convention (CWC) ( 10 ).
CONTENTS |
|
Notes |
|
Acronyms and abbreviations |
|
Definitions |
|
Category 0 |
Nuclear materials, facilities and equipment |
Category 1 |
Special materials and related equipment |
Category 2 |
Materials processing |
Category 3 |
Electronics |
Category 4 |
Computers |
Category 5 |
Telecommunications and ‘information security’ |
Category 6 |
Sensors and lasers |
Category 7 |
Navigation and avionics |
Category 8 |
Marine |
Category 9 |
Aerospace and propulsion |
GENERAL NOTES TO ANNEX I
1. For control of goods which are designed or modified for military use, see the relevant list(s) of controls on military goods maintained by individual EU Member States. References in this Annex that state ‘SEE ALSO MILITARY GOODS CONTROLS’ refer to the same lists.
2. The object of the controls contained in this Annex should not be defeated by the export of any non-controlled goods (including plant) containing one or more controlled components when the controlled component or components are the principal element of the goods and can feasibly be removed or used for other purposes.
NB: In judging whether the controlled component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the controlled component or components as the principal element of the goods being procured.
3. Goods specified in this Annex include both new and used goods.
4. In some instances chemicals are listed by name and CAS number. The list applies to chemicals of the same structural formula (including hydrates) regardless of name or CAS number. CAS numbers are shown to assist in identifying a particular chemical or mixture, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and mixtures containing a listed chemical may also have different CAS numbers.
NUCLEAR TECHNOLOGY NOTE (NTN)
(To be read in conjunction with section E of Category 0.)
The ‘technology’ directly associated with any goods controlled in Category 0 is controlled according to the provisions of Category 0.
‘Technology’ for the ‘development’, ‘production’ or ‘use’ of goods under control remains under control even when applicable to non-controlled goods.
The approval of goods for export also authorizes the export to the same end-user of the minimum ‘technology’ required for the installation, operation, maintenance and repair of the goods.
Controls on ‘technology’ transfer do not apply to information ‘in the public domain’ or to ‘basic scientific research’.
GENERAL TECHNOLOGY NOTE (GTN)
(To be read in conjunction with section E of Categories 1 to 9.)
The export of ‘technology’ which is ‘required’ for the ‘development’, ‘production’ or ‘use’ of goods controlled in Categories 1 to 9, is controlled according to the provisions of Categories 1 to 9.
‘Technology’‘required’ for the ‘development’, ‘production’ or ‘use’ of goods under control remains under control even when applicable to non-controlled goods.
Controls do not apply to that ‘technology’ which is the minimum necessary for the installation, operation, maintenance (checking) or repair of those goods which are not controlled or whose export has been authorised.
Note: This does not release such ‘technology’ specified in 1E002.e., 1E002.f., 8E002.a. and 8E002.b.
Controls on ‘technology’ transfers do not apply to information ‘in the public domain’, to ‘basic scientific research’ or to the minimum necessary information for patent applications.
NUCLEAR SOFTWARE NOTE (NSN)
(This note overrides any control within section D of Category 0)
Section D of Category 0 of this list does not control ‘software’ which is the minimum necessary ‘object code’ for the installation, operation, maintenance (checking) or repair of those items whose export has been authorised.
The approval of goods for export also authorises the export to the same end-user of the minimum necessary ‘object code’ for the installation, operation, maintenance (checking) or repair of the goods
Note: The Nuclear Software Note does not release ‘software’ specified in Category 5 – Part 2 (‘Information Security’).
GENERAL SOFTWARE NOTE (GSN)
(This note overrides any control within section D of Categories 1 to 9.)
Categories 1 to 9 of this list do not control ‘software’ which is any of the following:
Generally available to the public by being:
Sold from stock at retail selling points, without restriction, by means of:
Over-the-counter transactions;
Mail order transactions;
Electronic transactions; or
Telephone call transactions; and
Designed for installation by the user without further substantial support by the supplier;
Note: Entry a. of the General Software Note does not release ‘software’ specified in Category 5 – Part 2 (‘Information Security’).
‘In the public domain’; or
The minimum necessary ‘object code’ for the installation, operation, maintenance (checking) or repair of those items whose export has been authorised.
Note: Entry c. of the General Software Note does not release ‘software’ specified in Category 5 – Part 2 (‘Information Security’).
GENERAL ‘INFORMATION SECURITY’ NOTE (GISN)
‘Information security’ items or functions should be considered against the provisions in Category 5 – Part 2, even if they are components, ‘software’ or functions of other items.
EDITORIAL PRACTICES IN THE OFFICIAL JOURNAL OF THE EUROPEAN UNION
In accordance with the rules set out in paragraph 6.5 on page 108 of the Interinstitutional style guide (2015 edition), for texts in English published in the Official Journal of the European Union:
The text reproduced in this annex follows the above-described practice.
ACRONYMS AND ABBREVIATIONS USED IN THIS ANNEX
An acronym or abbreviation, when used as a defined term, are found in ‘Definitions of Terms used in this Annex’.
Acronym or meaning abbreviation |
|
ABEC |
Annular Bearing Engineers Committee |
ABMA |
American Bearing Manufacturers Association |
ADC |
Analogue-to-Digital Converter |
AGMA |
American Gear Manufacturers’ Association |
AHRS |
Attitude and Heading Reference Systems |
AISI |
American Iron and Steel Institute |
ALE |
Atomic Layer Epitaxy |
ALU |
Arithmetic Logic Unit |
ANSI |
American National Standards Institute |
APP |
Adjusted Peak Performance |
APU |
Auxiliary Power Unit |
ASTM |
American Society for Testing and Materials |
ATC |
Air Traffic Control |
BJT |
Bipolar Junction Transistors |
BPP |
Beam Parameter Product |
BSC |
Base Station Controller |
CAD |
Computer-Aided-Design |
CAS |
Chemical Abstracts Service |
CCD |
Charge Coupled Device |
CDU |
Control and Display Unit |
CEP |
Circular Error Probable |
CMM |
Coordinate Measuring Machine |
CMOS |
Complementary Metal Oxide Semiconductor |
CNTD |
Controlled Nucleation Thermal Deposition |
CPLD |
Complex Programmable Logic Device |
CPU |
Central Processing Unit |
CVD |
Chemical Vapour Deposition |
CW |
Chemical Warfare |
CW (for lasers) |
Continuous Wave |
DAC |
Digital-to-Analogue Converter |
DANL |
Displayed Average Noise Level |
DBRN |
Data-Base Referenced Navigation |
DDS |
Direct Digital Synthesizer |
DMA |
Dynamic Mechanical Analysis |
DME |
Distance Measuring Equipment |
DMOSFET |
Diffused Metal Oxide Semiconductor Field Effect Transistor |
DS |
Directionally Solidified |
EB |
Exploding Bridge |
EB-PVD |
Electron Beam Physical Vapour Deposition |
EBW |
Exploding Bridge Wire |
ECM |
Electro-Chemical Machining |
EDM |
Electrical Discharge Machines |
EFI |
Exploding Foil Initiators |
EIRP |
Effective Isotropic Radiated Power |
EMP |
Electromagnetic Pulse |
ENOB |
Effective Number of Bits |
ERF |
Electrorheological Finishing |
ERP |
Effective Radiated Power |
ESD |
Electrostatic Discharge |
ETO |
Emitter Turn-Off Thyristor |
ETT |
Electrical Triggering Thyristor |
EU |
European Union |
EUV |
Extreme Ultraviolet |
FADEC |
Full Authority Digital Engine Control |
FFT |
Fast Fourier Transform |
FPGA |
Field Programmable Gate Array |
FPIC |
Field Programmable Interconnect |
FPLA |
Field Programmable Logic Array |
FPO |
Floating Point Operation |
FWHM |
Full-Width Half-Maximum |
GLONASS |
Global Navigation Satellite System |
GNSS |
Global Navigation Satellite System |
GPS |
Global Positioning System |
GSM |
Global System for Mobile Communications |
GTO |
Gate Turn-off Thyristor |
HBT |
Hetero-Bipolar Transistors |
HDMI |
High-Definition Multimedia Interface |
HEMT |
High Electron Mobility Transistor |
ICAO |
International Civil Aviation Organization |
IEC |
International Electro-technical Commission |
IED |
Improvised Explosive Device |
IEEE |
Institute of Electrical and Electronic Engineers |
IFOV |
Instantaneous-Field-Of-View |
IGBT |
Insulated Gate Bipolar Transistor |
IGCT |
Integrated Gate Commutated Thyristor |
IHO |
International Hydrographic Organization |
ILS |
Instrument Landing System |
IMU |
Inertial Measurement Unit |
INS |
Inertial Navigation System |
IP |
Internet Protocol |
IRS |
Inertial Reference System |
IRU |
Inertial Reference Unit |
ISA |
International Standard Atmosphere |
ISAR |
Inverse Synthetic Aperture Radar |
ISO |
International Organization for Standardization |
ITU |
International Telecommunication Union |
JT |
Joule-Thomson |
LIDAR |
Light Detection and Ranging |
LIDT |
Laser Induced Damage Threshold |
LOA |
Length Overall |
LRU |
Line Replaceable Unit |
LTT |
Light Triggering Thyristor |
MLS |
Microwave Landing Systems |
MMIC |
Monolithic Microwave Integrated Circuit |
MOCVD |
Metal Organic Chemical Vapour Deposition |
MOSFET |
Metal-Oxide-Semiconductor Field Effect Transistor |
MPM |
Microwave Power Module |
MRF |
Magnetorheological Finishing |
MRF |
Minimum Resolvable Feature size |
MRI |
Magnetic Resonance Imaging |
MTBF |
Mean-Time-Between-Failures |
MTTF |
Mean-Time-To-Failure |
NA |
Numerical Aperture |
NDT |
Non-Destructive Test |
NEQ |
Net Explosive Quantity |
NIJ |
National Institute of Justice |
OAM |
Operations, Administration or Maintenance |
OSI |
Open Systems Interconnection |
PAI |
Polyamide-imides |
PAR |
Precision Approach Radar |
PCL |
Passive Coherent Location |
PDK |
Process Design Kit |
PIN |
Personal Identification Number |
PMR |
Private Mobile Radio |
PVD |
Physical Vapour Deposition |
ppm |
parts per million |
QAM |
Quadrature-Amplitude-Modulation |
QE |
Quantum Efficiency |
RAP |
Reactive Atom Plasmas |
RF |
Radio Frequency |
rms |
Root Mean Square |
RNC |
Radio Network Controller |
RNSS |
Regional Navigation Satellite System |
ROIC |
Read-out Integrated Circuit |
S-FIL |
Step and Flash Imprint Lithography |
SAR |
Synthetic Aperture Radar |
SAS |
Synthetic Aperture Sonar |
SC |
Single Crystal |
SCR |
Silicon Controlled Rectifier |
SFDR |
Spurious Free Dynamic Range |
SHPL |
Super High Powered Laser |
SLAR |
Sidelooking Airborne Radar |
SOI |
Silicon-on-Insulator |
SQUID |
Superconducting Quantum Interference Device |
SRA |
Shop Replaceable Assembly |
SRAM |
Static Random Access Memory |
SSB |
Single Sideband |
SSR |
Secondary Surveillance Radar |
SSS |
Side Scan Sonar |
TIR |
Total Indicated Reading |
TVR |
Transmitting Voltage Response |
u |
Atomic Mass Unit |
UPR |
Unidirectional Positioning Repeatability |
UV |
Ultraviolet |
UTS |
Ultimate Tensile Strength |
VJFET |
Vertical Junction Field Effect Transistor |
VOR |
Very High Frequency Omni-directional Range |
WHO |
World Health Organization |
WLAN |
Wireless Local Area Network |
DEFINITIONS OF TERMS USED IN THIS ANNEX
Definitions of terms between ‘single quotation marks’ are given in a Technical Note to the relevant item.
Definitions of terms between ‘double quotation marks’ are as follows:
NB: Category references are given in brackets after the defined term.
‘Accuracy’ (2 3 6 7 8), usually measured in terms of inaccuracy, means the maximum deviation, positive or negative, of an indicated value from an accepted standard or true value.
‘Active flight control systems’ (7) are systems that function to prevent undesirable ‘aircraft’ and missile motions or structural loads by autonomously processing outputs from multiple sensors and then providing necessary preventive commands to effect automatic control.
‘Active pixel’ (6) is a minimum (single) element of the solid state array which has a photoelectric transfer function when exposed to light (electromagnetic) radiation.
‘Adjusted Peak Performance’ (4) is an adjusted peak rate at which ‘digital computers’ perform 64-bit or larger floating point additions and multiplications, and is expressed in Weighted TeraFLOPS (WT) with units of 1012 adjusted floating point operations per second.
NB: See Category 4, Technical Note.
‘Aircraft’ (1 6 7 9) means a fixed wing, swivel wing, rotary wing (helicopter), tilt rotor or tilt-wing airborne vehicle.
NB: See also ‘civil aircraft’.
‘Airship’ (9) means a power-driven airborne vehicle that is kept buoyant by a body of gas (usually helium, formerly hydrogen) which is lighter than air.
‘All compensations available’ (2) means after all feasible measures available to the manufacturer to minimise all systematic positioning errors for the particular machine-tool model or measuring errors for the particular coordinate measuring machine are considered.
‘Allocated by the ITU’ (3 5) means the allocation of frequency bands according to the current edition of the ITU Radio Regulations for primary, permitted and secondary services.
NB: Additional and alternative allocations are not included.
‘Angular position deviation’ (2) means the maximum difference between angular position and the actual, very accurately measured angular position after the workpiece mount of the table has been turned out of its initial position.
‘Angle random walk’ (7) means the angular error build up with time that is due to white noise in angular rate (IEEE STD 528-2001).
‘APP’ (4) is equivalent to ‘Adjusted Peak Performance’.
‘Asymmetric algorithm’ (5) means a cryptographic algorithm using different, mathematically-related keys for encryption and decryption.
NB: A common use of ‘asymmetric algorithms’ is key management.
‘Authentication’ (5) means verifying the identity of a user, process or device, often as a prerequisite to allowing access to resources in an information system. This includes verifying the origin or content of a message or other information, and all aspects of access control where there is no encryption of files or text except as directly related to the protection of passwords, Personal Identification Numbers (PINs) or similar data to prevent unauthorized access.
‘Average output power’ (6) means the total ‘laser’ output energy, in joules, divided by the period over which a series of consecutive pulses is emitted, in seconds. For a series of uniformly spaced pulses it is equal to the total ‘laser’ output energy in a single pulse, in joules, multiplied by the pulse frequency of the ‘laser’, in Hertz.
‘Basic gate propagation delay time’ (3) means the propagation delay time value corresponding to the basic gate used in a ‘monolithic integrated circuit’. For a ‘family’ of ‘monolithic integrated circuits’, this may be specified either as the propagation delay time per typical gate within the given ‘family’ or as the typical propagation delay time per gate within the given ‘family’.
N.B.1. ‘Basic gate propagation delay time’ is not to be confused with the input/output delay time of a complex ‘monolithic integrated circuit’.
N.B.2. ‘Family’ consists of all integrated circuits to which all of the following are applied as their manufacturing methodology and specifications except their respective functions:
The common hardware and software architecture;
The common design and process technology; and
The common basic characteristics.
‘Basic scientific research’ (GTN NTN) means experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena or observable facts, not primarily directed towards a specific practical aim or objective.
‘Bias’ (accelerometer) (7) means the average over a specified time of accelerometer output, measured at specified operating conditions, that has no correlation with input acceleration or rotation. ‘Bias’ is expressed in g or in metres per second squared (g or m/s2). (IEEE Std 528-2001) (Micro g equals 1x10–6 g).
‘Bias’ (gyro) (7) means the average over a specified time of gyro output measured at specified operating conditions that has no correlation with input rotation or acceleration. ‘Bias’ is typically expressed in degrees per hour (deg/hr). (IEEE Std 528-2001).
‘Biological agents’ (1) are pathogens or toxins, selected or modified (such as altering purity, shelf life, virulence, dissemination characteristics, or resistance to UV radiation) to produce casualties in humans or animals, degrade equipment or damage crops or the environment.
‘Camming’ (2) means axial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle faceplate, at a point next to the circumference of the spindle faceplate (Reference: ISO 230-1:1986, paragraph 5.63).
‘CEP’ (7) means ‘Circular Error Probable’ – In a circular normal distribution, the radius of the circle containing 50 % of the individual measurements being made, or the radius of the circle within which there is a 50 % probability of being located.
‘Chemical laser’ (6) means a ‘laser’ in which the excited species is produced by the output energy from a chemical reaction.
‘Chemical mixture’ (1) means a solid, liquid or gaseous product made up of two or more components which do not react together under the conditions under which the mixture is stored.
‘Circulation-controlled anti-torque or circulation controlled direction control systems’ (7) are systems that use air blown over aerodynamic surfaces to increase or control the forces generated by the surfaces.
‘Civil aircraft’ (1 3 4 7) means those ‘aircraft’ listed by designation in published airworthiness certification lists by the civil aviation authorities of one or more EU Member States or Wassenaar Arrangement Participating States to fly commercial civil internal and external routes or for legitimate civil, private or business use.
NB: See also ‘aircraft’.
‘Communications channel controller’ (4) means the physical interface which controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access.
‘Compensation systems’ (6) consist of the primary scalar sensor, one or more reference sensors (e.g., vector ‘magnetometers’) together with software that permit reduction of rigid body rotation noise of the platform.
‘Composite’ (1 2 6 8 9) means a ‘matrix’ and an additional phase or additional phases consisting of particles, whiskers, fibres or any combination thereof, present for a specific purpose or purposes.
‘III/V compounds’ (3 6) means polycrystalline or binary or complex monocrystalline products consisting of elements of groups IIIA and VA of Mendeleyev’s periodic classification table (e.g., gallium arsenide, gallium-aluminium arsenide, indium phosphide).
‘Contouring control’ (2) means two or more ‘numerically controlled’ motions operating in accordance with instructions that specify the next required position and the required feed rates to that position. These feed rates are varied in relation to each other so that a desired contour is generated. (ref. ISO/DIS 2806 – 1980).
‘Critical temperature’ (1 3 5) (sometimes referred to as the transition temperature) of a specific ‘superconductive’ material means the temperature at which the material loses all resistance to the flow of direct electrical current.
‘Cryptographic activation’ (5) means any technique that specifically activates or enables cryptographic capability of an item, by means of a mechanism implemented by the manufacturer of the item, where this mechanism is uniquely bound to any of the following:
A single instance of the item; or
One customer, for multiple instances of the item.
Technical Notes:
1. ‘Cryptographic activation’ techniques and mechanisms may be implemented as hardware, ‘software’ or ‘technology’.
2. Mechanisms for ‘cryptographic activation’ can, for example, be serial number-based licence keys or authentication instruments such as digitally signed certificates.
‘Cryptography’ (5) means the discipline which embodies principles, means and methods for the transformation of data in order to hide its information content, prevent its undetected modification or prevent its unauthorized use. ‘Cryptography’ is limited to the transformation of information using one or more ‘secret parameters’ (e.g., crypto variables) or associated key management.
Notes:
1. ‘Cryptography’ does not include ‘fixed’ data compression or coding techniques.
2. ‘Cryptography’ includes decryption.
Technical Notes:
1. ‘Secret parameter’: a constant or key kept from the knowledge of others or shared only within a group.
2. ‘Fixed’: the coding or compression algorithm cannot accept externally supplied parameters (e.g., cryptographic or key variables) and cannot be modified by the user.
‘CW laser’ (6) means a ‘laser’ that produces a nominally constant output energy for greater than 0,25 seconds.
‘Cyber incident response’ (4) means the process of exchanging necessary information on a cybersecurity incident with individuals or organisations responsible for conducting or coordinating remediation to address the cybersecurity incident.
‘Data-Based Referenced Navigation’ (‘DBRN’) (7) Systems means systems which use various sources of previously measured geo-mapping data integrated to provide accurate navigation information under dynamic conditions. Data sources include bathymetric maps, stellar maps, gravity maps, magnetic maps or 3-D digital terrain maps.
‘Depleted uranium’ (0) means uranium depleted in the isotope 235 below that occurring in nature.
‘Development’ (GTN NTN All) is related to all phases prior to serial production, such as: design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration design, integration design, layouts.
‘Diffusion bonding’ (1 2 9) means a solid state joining of at least two separate pieces of metals into a single piece with a joint strength equivalent to that of the weakest material, wherein the principal mechanism is interdiffusion of atoms across the interface.
‘Digital computer’ (4 5) means equipment which can, in the form of one or more discrete variables, perform all of the following:
Accept data;
Store data or instructions in fixed or alterable (writable) storage devices;
Process data by means of a stored sequence of instructions which is modifiable; and
Provide output of data.
NB: Modifications of a stored sequence of instructions include replacement of fixed storage devices, but not a physical change in wiring or interconnections.
‘Digital transfer rate’ (def) means the total bit rate of the information that is directly transferred on any type of medium.
NB: See also ‘total digital transfer rate’.
‘Drift rate’ (gyro) (7) means the component of gyro output that is functionally independent of input rotation. It is expressed as an angular rate. (IEEE STD 528-2001).
‘Effective gramme’ (0 1) of ‘special fissile material’ means:
For plutonium isotopes and uranium-233, the isotope weight in grammes;
For uranium enriched 1 per cent or greater in the isotope uranium-235, the element weight in grammes multiplied by the square of its enrichment expressed as a decimal weight fraction;
For uranium enriched below 1 per cent in the isotope uranium-235, the element weight in grammes multiplied by 0,0001;
‘Electronic assembly’ (2 3 4) means a number of electronic components (i.e., ‘circuit elements’, ‘discrete components’, integrated circuits, etc.) connected together to perform (a) specific function(s), replaceable as an entity and normally capable of being disassembled.
N.B.1. ‘Circuit element’: a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.
N.B.2. ‘Discrete component’: a separately packaged ‘circuit element’ with its own external connections.
‘Energetic materials’ (1) means substances or mixtures that react chemically to release energy required for their intended application. ‘Explosives’, ‘pyrotechnics’ and ‘propellants’ are subclasses of energetic materials.
‘End-effectors’ (2) means grippers, ‘active tooling units’ and any other tooling that is attached to the baseplate on the end of a ‘robot’ manipulator arm.
NB: ‘Active tooling unit’ means a device for applying motive power, process energy or sensing to the workpiece.
‘Equivalent density’ (6) means the mass of an optic per unit optical area projected onto the optical surface.
‘Equivalent standards’ (1) means comparable national or international standards recognised by one or more EU Member States or Wassenaar Arrangement Participating States and applicable to the relevant entry.
‘Explosives’ (1) means solid, liquid or gaseous substances or mixtures of substances which, in their application as primary, booster, or main charges in warheads, demolition and other applications, are required to detonate.
‘FADEC Systems’ (9) means Full Authority Digital Engine Control Systems – A digital electronic control system for a gas turbine engine that is able to autonomously control the engine throughout its whole operating range from demanded engine start until demanded engine shut-down, in both normal and fault conditions.
‘Fibrous or filamentary materials’ (0 1 8 9) include:
Continuous ‘monofilaments’;
Continuous ‘yarns’ and ‘rovings’;
‘Tapes’, fabrics, random mats and braids;
Chopped fibres, staple fibres and coherent fibre blankets;
Whiskers, either monocrystalline or polycrystalline, of any length;
Aromatic polyamide pulp.
‘Film type integrated circuit’ (3) means an array of ‘circuit elements’ and metallic interconnections formed by deposition of a thick or thin film on an insulating ‘substrate’.
NB: ‘Circuit element’ is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.
‘Fly-by-light system’ (7) means a primary digital flight control system employing feedback to control the ‘aircraft’ during flight, where the commands to the effectors/actuators are optical signals.
‘Fly-by-wire system’ (7) means a primary digital flight control system employing feedback to control the ‘aircraft’ during flight, where the commands to the effectors/actuators are electrical signals.
‘Focal plane array’ (6 8) means a linear or two-dimensional planar layer, or combination of planar layers, of individual detector elements, with or without readout electronics, which work in the focal plane.
NB: This is not intended to include a stack of single detector elements or any two, three or four element detectors provided time delay and integration is not performed within the element.
‘Fractional bandwidth’ (3 5) means the ‘instantaneous bandwidth’ divided by the centre frequency, expressed as a percentage.
‘Frequency hopping’ (5 6) means a form of ‘spread spectrum’ in which the transmission frequency of a single communication channel is made to change by a random or pseudo-random sequence of discrete steps.
‘Frequency switching time’ (3) means the time (i.e., delay) taken by a signal when switched from an initial specified output frequency, to arrive at or within any of the following:
±100 Hz of a final specified output frequency of less than 1 GHz; or
±0,1 part per million of a final specified output frequency equal to or greater than 1 GHz.
‘Fuel cell’ (8) is an electrochemical device that converts chemical energy directly into Direct Current (DC) electricity by consuming fuel from an external source.
‘Fusible’ (1) means capable of being cross-linked or polymerized further (cured) by the use of heat, radiation, catalysts, etc., or that can be melted without pyrolysis (charring).
‘Hard selectors’ (5) means data or set of data, related to an individual (e.g., family name, given name, email, street address, phone number or group affiliations).
‘Guidance set’ (7) means systems that integrate the process of measuring and computing a vehicles position and velocity (i.e., navigation) with that of computing and sending commands to the vehicles flight control systems to correct the trajectory.
‘Hybrid integrated circuit’ (3) means any combination of integrated circuit(s), or integrated circuit with ‘circuit elements’ or ‘discrete components’ connected together to perform (a) specific function(s), and having all of the following characteristics:
Containing at least one unencapsulated device;
Connected together using typical IC production methods;
Replaceable as an entity; and
Not normally capable of being disassembled.
N.B.1. ‘Circuit element’: a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.
N.B.2. ‘Discrete component’: a separately packaged ‘circuit element’ with its own external connections.
‘Image enhancement’ (4) means the processing of externally derived information-bearing images by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform). This does not include algorithms using only linear or rotational transformation of a single image, such as translation, feature extraction, registration or false coloration.
‘Immunotoxin’ (1) is a conjugate of one cell specific monoclonal antibody and a ‘toxin’ or ‘sub-unit of toxin’, that selectively affects diseased cells.
‘In the public domain’ (GTN NTN GSN), as it applies herein, means ‘technology’ or ‘software’ which has been made available without restrictions upon its further dissemination (copyright restrictions do not remove ‘technology’ or ‘software’ from being ‘in the public domain’).
‘Information security’ (GSN GISN 5) is all the means and functions ensuring the accessibility, confidentiality or integrity of information or communications, excluding the means and functions intended to safeguard against malfunctions. This includes ‘cryptography’, ‘cryptographic activation’, ‘cryptanalysis’, protection against compromising emanations and computer security.
Technical Note:
‘Cryptanalysis’: analysis of a cryptographic system or its inputs and outputs to derive confidential variables or sensitive data, including clear text.
‘Instantaneous bandwidth’ (3 5 7) means the bandwidth over which output power remains constant within 3 dB without adjustment of other operating parameters.
‘Insulation’ (9) is applied to the components of a rocket motor, i.e., the case, nozzle, inlets, case closures, and includes cured or semi-cured compounded rubber sheet stock containing an insulating or refractory material. It may also be incorporated as stress relief boots or flaps.
‘Interior lining’ (9) is suited for the bond interface between the solid propellant and the case or insulating liner. Usually a liquid polymer based dispersion of refractory or insulating materials, e.g. carbon filled hydroxyl terminated polybutadiene (HTPB) or other polymer with added curing agents sprayed or screeded over a case interior.
‘Interleaved Analogue-to-Digital Converter (ADC)’ (3) means devices that have multiple ADC units that sample the same analogue input at different times such that when the outputs are aggregated, the analogue input has been effectively sampled and converted at a higher sampling rate.
‘Intrinsic Magnetic Gradiometer’ (6) is a single magnetic field gradient sensing element and associated electronics the output of which is a measure of magnetic field gradient.
NB: See also ‘magnetic gradiometer’.
‘Intrusion software’ (4 5) means ‘software’ specially designed or modified to avoid detection by ‘monitoring tools’, or to defeat ‘protective countermeasures’, of a computer or network-capable device, and performing any of the following:
The extraction of data or information, from a computer or network-capable device, or the modification of system or user data; or
The modification of the standard execution path of a program or process in order to allow the execution of externally provided instructions.
Notes:
1. ‘Intrusion software’ does not include any of the following:
Hypervisors, debuggers or Software Reverse Engineering (SRE) tools;
Digital Rights Management (DRM) ‘software’; or
‘Software’ designed to be installed by manufacturers, administrators or users, for the purposes of asset tracking or recovery.
2. Network-capable devices include mobile devices and smart meters.
Technical Notes:
1. ‘Monitoring tools’: ‘software’ or hardware devices, that monitor system behaviours or processes running on a device. This includes antivirus (AV) products, end point security products, Personal Security Products (PSP), Intrusion Detection Systems (IDS), Intrusion Prevention Systems (IPS) or firewalls.
2. ‘Protective countermeasures’: techniques designed to ensure the safe execution of code, such as Data Execution Prevention (DEP), Address Space Layout Randomisation (ASLR) or sandboxing.
‘Isolated live cultures’ (1) includes live cultures in dormant form and in dried preparations.
‘Isostatic presses’ (2) mean equipment capable of pressurising a closed cavity through various media (gas, liquid, solid particles, etc.) to create equal pressure in all directions within the cavity upon a workpiece or material.
‘Laser’ (0 1 2 3 5 6 7 8 9) is an item that produces spatially and temporally coherent light through amplification by stimulated emission of radiation.
See also |
‘Chemical laser’; |
‘CW laser’; |
‘Pulsed laser’; |
‘Super High Power Laser’. |
‘Library’ (1) (parametric technical database) means a collection of technical information, reference to which may enhance the performance of relevant systems, equipment or components.
‘Lighter-than-air vehicles’ (9) means balloons and ‘airships’ that rely on hot air or other lighter-than-air gases such as helium or hydrogen for their lift.
‘Linearity’ (2) (Usually measured in terms of non-linearity) means the maximum deviation of the actual characteristic (average of upscale and downscale readings), positive or negative, from a straight line so positioned as to equalise and minimise the maximum deviations.
‘Local area network’ (4 5) is a data communication system having all of the following characteristics:
Allows an arbitrary number of independent ‘data devices’ to communicate directly with each other; and
Is confined to a geographical area of moderate size (e.g., office building, plant, campus, warehouse).
NB: ‘Data device’ means equipment capable of transmitting or receiving sequences of digital information.
‘Magnetic Gradiometers’ (6) are instruments designed to detect the spatial variation of magnetic fields from sources external to the instrument. They consist of multiple ‘magnetometers’ and associated electronics the output of which is a measure of magnetic field gradient.
NB: See also ‘intrinsic magnetic gradiometer’.
‘Magnetometers’ (6) are instruments designed to detect magnetic fields from sources external to the instrument. They consist of a single magnetic field sensing element and associated electronics the output of which is a measure of the magnetic field.
‘Materials resistant to corrosion by UF6’ (0) include copper, copper alloys, stainless steel, aluminium, aluminium oxide, aluminium alloys, nickel or alloys containing 60 % or more nickel by weight and fluorinated hydrocarbon polymers.
‘Matrix’ (1 2 8 9) means a substantially continuous phase that fills the space between particles, whiskers or fibres.
‘Measurement uncertainty’ (2) is the characteristic parameter which specifies in what range around the output value the correct value of the measurable variable lies with a confidence level of 95 %. It includes the uncorrected systematic deviations, the uncorrected backlash and the random deviations (ref. ISO 10360-2).
‘Microcomputer microcircuit’ (3) means a ‘monolithic integrated circuit’ or ‘multichip integrated circuit’ containing an arithmetic logic unit (ALU) capable of executing general purpose instructions from an internal storage, on data contained in the internal storage.
NB: The internal storage may be augmented by an external storage.
‘Microprocessor microcircuit’ (3) means a ‘monolithic integrated circuit’ or ‘multichip integrated circuit’ containing an arithmetic logic unit (ALU) capable of executing a series of general purpose instructions from an external storage.
N.B.1. The ‘microprocessor microcircuit’ normally does not contain integral user-accessible storage, although storage present on-the-chip may be used in performing its logic function.
N.B.2. This includes chip sets which are designed to operate together to provide the function of a ‘microprocessor microcircuit’.
‘Microorganisms’ (1 2) means bacteria, viruses, mycoplasms, rickettsiae, chlamydiae or fungi, whether natural, enhanced or modified, either in the form of ‘isolated live cultures’ or as material including living material which has been deliberately inoculated or contaminated with such cultures.
‘Missiles’ (1 3 6 7 9) means complete rocket systems and unmanned aerial vehicle systems, capable of delivering at least 500 kg payload to a range of at least 300 km.
‘Monofilament’ (1) or filament is the smallest increment of fibre, usually several micrometres in diameter.
‘Monolithic integrated circuit’ (3) means a combination of passive or active ‘circuit elements’ or both which:
Are formed by means of diffusion processes, implantation processes or deposition processes in or on a single semiconducting piece of material, a so-called ‘chip’;
Can be considered as indivisibly associated; and
Perform the function(s) of a circuit.
NB: ‘Circuit element’ is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.
‘Monolithic Microwave Integrated Circuit’ (‘MMIC’) (3 5) means a ‘monolithic integrated circuit’ that operates at microwave or millimeter wave frequencies.
‘Monospectral imaging sensors’ (6) are capable of acquisition of imaging data from one discrete spectral band.
‘Multichip integrated circuit’ (3) means two or more ‘monolithic integrated circuits’ bonded to a common ‘substrate’.
‘Multiple channel Analogue-to-Digital Converter (ADC)’ (3) means devices that integrate more than one ADC, designed so that each ADC has a separate analogue input.
‘Multispectral imaging sensors’ (6) are capable of simultaneous or serial acquisition of imaging data from two or more discrete spectral bands. Sensors having more than twenty discrete spectral bands are sometimes referred to as hyperspectral imaging sensors.
‘Natural uranium’ (0) means uranium containing the mixtures of isotopes occurring in nature.
‘Network access controller’ (4) means a physical interface to a distributed switching network. It uses a common medium which operates throughout at the same ‘digital transfer rate’ using arbitration (e.g., token or carrier sense) for transmission. Independently from any other, it selects data packets or data groups (e.g., IEEE 802) addressed to it. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access.
‘Nuclear reactor’ (0) means a complete reactor capable of operation so as to maintain a controlled self-sustaining fission chain reaction. A ‘nuclear reactor’ includes all the items within or attached directly to the reactor vessel, the equipment which controls the level of power in the core, and the components which normally contain, come into direct contact with or control the primary coolant of the reactor core.
‘Numerical control’ (2) means the automatic control of a process performed by a device that makes use of numeric data usually introduced as the operation is in progress (ref. ISO 2382:2015).
‘Object code’ (GSN) means an equipment executable form of a convenient expression of one or more processes (‘source code’ (source language)) which has been compiled by programming system.
‘Operations, Administration or Maintenance’ (‘OAM’) (5) means performing one or more of the following tasks:
Establishing or managing any of the following:
Accounts or privileges of users or administrators;
Settings of an item; or
Authentication data in support of the tasks described in paragraphs a.1. or a.2.;
Monitoring or managing the operating condition or performance of an item; or
Managing logs or audit data in support of any of the tasks described in paragraphs a. or b.
Note: ‘OAM’ does not include any of the following tasks or their associated key management functions:
Provisioning or upgrading any cryptographic functionality that is not directly related to establishing or managing authentication data in support of the tasks described in paragraphs a.1. or a.2. above; or
Performing any cryptographic functionality on the forwarding or data plane of an item.
‘Optical integrated circuit’ (3) means a ‘monolithic integrated circuit’ or a ‘hybrid integrated circuit’, containing one or more parts designed to function as a photosensor or photoemitter or to perform (an) optical or (an) electro-optical function(s).
‘Optical switching’ (5) means the routing of or switching of signals in optical form without conversion to electrical signals.
‘Overall current density’ (3) means the total number of ampere-turns in the coil (i.e., the sum of the number of turns multiplied by the maximum current carried by each turn) divided by the total cross-section of the coil (comprising the superconducting filaments, the metallic matrix in which the superconducting filaments are embedded, the encapsulating material, any cooling channels, etc.).
‘Participating state’ (7 9) is a state participating in the Wassenaar Arrangement. (See www.wassenaar.org)
‘Peak power’ (6) means the highest power attained in the ‘pulse duration’.
‘Personal area network’ (5) means a data communication system having all of the following characteristics:
Allows an arbitrary number of independent or interconnected ‘data devices’ to communicate directly with each other; and
Is confined to the communication between devices within the immediate physical vicinity of an individual person or device controller (e.g., single room, office, or automobile).
Technical Notes:
1. ‘Data device’ means equipment capable of transmitting or receiving sequences of digital information.
2. The ‘local area network’ extends beyond the geographical area of the ‘personal area network’.
‘Previously separated’ (1) is the application of any process intended to increase the concentration of the controlled isotope.
‘Principal element’ (4), as it applies in Category 4, is a ‘principal element’ when its replacement value is more than 35 % of the total value of the system of which it is an element. Element value is the price paid for the element by the manufacturer of the system, or by the system integrator. Total value is the normal international selling price to unrelated parties at the point of manufacture or consolidation of shipment.
‘Production’ (GTN NTN All) means all production phases, such as: construction, production engineering, manufacture, integration, assembly (mounting), inspection, testing, quality assurance.
‘Production equipment’ (1 7 9) means tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components therefor, limited to those specially designed or modified for ‘development’ or for one or more phases of ‘production’.
‘Production facilities’ (7 9) means ‘production equipment’ and specially designed software therefor integrated into installations for ‘development’ or for one or more phases of ‘production’.
‘Program’ (2 6) means a sequence of instructions to carry out a process in, or convertible into, a form executable by an electronic computer.
‘Pulse compression’ (6) means the coding and processing of a radar signal pulse of long time duration to one of short time duration, while maintaining the benefits of high pulse energy.
‘Pulse duration’ (6) is the duration of a ‘laser’ pulse and means the time between the half-power points on the leading edge and trailing edge of an individual pulse.
‘Pulsed laser’ (6) means a ‘laser’ having a ‘pulse duration’ that is less than or equal to 0,25 seconds.
‘Quantum cryptography’ (5) means a family of techniques for the establishment of shared key for ‘cryptography’ by measuring the quantum-mechanical properties of a physical system (including those physical properties explicitly governed by quantum optics, quantum field theory or quantum electrodynamics).
‘Radar frequency agility’ (6) means any technique which changes, in a pseudo-random sequence, the carrier frequency of a pulsed radar transmitter between pulses or between groups of pulses by an amount equal to or larger than the pulse bandwidth.
‘Radar spread spectrum’ (6) means any modulation technique for spreading energy originating from a signal with a relatively narrow frequency band, over a much wider band of frequencies, by using random or pseudo-random coding.
‘Radiant sensitivity’ (6) is Radiant sensitivity (mA/W) = 0,807 × (wavelength in nm) × Quantum Efficiency (QE).
Technical Note:
QE is usually expressed as a percentage; however, for the purposes of this formula QE is expressed as a decimal number less than one, e.g., 78 % is 0,78.
‘Real-time processing’ (6) means the processing of data by a computer system providing a required level of service, as a function of available resources, within a guaranteed response time, regardless of the load of the system, when stimulated by an external event.
‘Repeatability’ (7) means the closeness of agreement among repeated measurements of the same variable under the same operating conditions when changes in conditions or non-operating periods occur between measurements. (Reference: IEEE STD 528-2001 (one sigma standard deviation))
‘Required’ (GTN 3 5 6 7 9), as applied to ‘technology’, refers to only that portion of ‘technology’ which is peculiarly responsible for achieving or extending the controlled performance levels, characteristics or functions. Such ‘required’‘technology’ may be shared by different goods.
‘Riot control agent’ (1) means substances which, under the expected conditions of use for riot control purposes, produce rapidly in humans sensory irritation or disabling physical effects which disappear within a short time following termination of exposure.
Technical Note:
Tear gases are a subset of ‘riot control agents’.
‘Robot’ (2 8) means a manipulation mechanism, which may be of the continuous path or of the point-to-point variety, may use sensors, and has all the following characteristics:
Is multifunctional;
Is capable of positioning or orienting material, parts, tools or special devices through variable movements in three dimensional space;
Incorporates three or more closed or open loop servo-devices which may include stepping motors; and
Has ‘user accessible programmability’ by means of teach/playback method or by means of an electronic computer which may be a programmable logic controller, i.e., without mechanical intervention.
NB: The above definition does not include the following devices:
Manipulation mechanisms which are only manually/teleoperator controllable;
Fixed sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The programme is mechanically limited by fixed stops, such as pins or cams. The sequence of motions and the selection of paths or angles are not variable or changeable by mechanical, electronic or electrical means;
Mechanically controlled variable sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The programme is mechanically limited by fixed, but adjustable stops, such as pins or cams. The sequence of motions and the selection of paths or angles are variable within the fixed programme pattern. Variations or modifications of the programme pattern (e.g., changes of pins or exchanges of cams) in one or more motion axes are accomplished only through mechanical operations;
Non-servo-controlled variable sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The programme is variable but the sequence proceeds only by the binary signal from mechanically fixed electrical binary devices or adjustable stops;
Stacker cranes defined as Cartesian coordinate manipulator systems manufactured as an integral part of a vertical array of storage bins and designed to access the contents of those bins for storage or retrieval.
‘Roving’ (1) is a bundle (typically 12-120) of approximately parallel ‘strands’.
NB: ‘Strand’ is a bundle of ‘monofilaments’ (typically over 200) arranged approximately parallel.
‘Run-out’ (2) (out-of-true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230-1:1986, paragraph 5.61).
‘Sample rate’ (3) for an Analogue-to-Digital Converter (ADC) means the maximum number of samples that are measured at the analogue input over a period of one second, except for oversampling ADCs. For oversampling ADCs the ‘sample rate’ is taken to be its output word rate. ‘Sample rate’ may also be referred to as sampling rate, usually specified in Mega Samples Per Second (MSPS) or Giga Samples Per Second (GSPS), or conversion rate, usually specified in Hertz (Hz).
‘Satellite navigation system’ (5 7) means a system consisting of ground stations, a constellation of satellites, and receivers, that enables receiver locations to be calculated on the basis of signals received from the satellites. It includes Global Navigation Satellite Systems (GNSS) and Regional Navigation Satellite Systems (RNSS).
‘Scale factor’ (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured. Scale factor is generally evaluated as the slope of the straight line that can be fitted by the method of least squares to input-output data obtained by varying the input cyclically over the input range.
‘Signal analysers’ (3) means apparatus capable of measuring and displaying basic properties of the single-frequency components of multi-frequency signals.
‘Signal processing’ (3 4 5 6) means the processing of externally derived information-bearing signals by algorithms such as time compression, filtering, extraction, selection, correlation, convolution or transformations between domains (e.g., fast Fourier transform or Walsh transform).
‘Software’ (GSN All) means a collection of one or more ‘programs’ or ‘microprograms’ fixed in any tangible medium of expression.
NB: ‘Microprogram’ means a sequence of elementary instructions, maintained in a special storage, the execution of which is initiated by the introduction of its reference instruction into an instruction register.
‘Source code’ (or source language) (6 7 9) is a convenient expression of one or more processes which may be turned by a programming system into equipment executable form (‘object code’ (or object language)).
‘Spacecraft’ (9) means active and passive satellites and space probes.
‘Spacecraft bus’ (9) means equipment that provides the support infrastructure of the ‘spacecraft’ and location for the ‘spacecraft payload’.
‘Spacecraft payload’ (9) means equipment, attached to the ‘spacecraft bus’, designed to perform a mission in space (e.g., communications, observation, science).
‘Space-qualified’ (3 6 7) means designed, manufactured or qualified through successful testing, for operation at altitudes greater than 100 km above the surface of the Earth.
NB: A determination that a specific item is ‘Space-qualified’ by virtue of testing does not mean that other items in the same production run or model series are ‘Space-qualified’ if not individually tested.
‘Special fissile material’ (0) means plutonium-239, uranium-233, ‘uranium enriched in the isotopes 235 or 233’, and any material containing the foregoing.
‘Specific modulus’ (0 1 9) is Young’s modulus in pascals, equivalent to N/m2 divided by specific weight in N/m3, measured at a temperature of (296 ± 2) K ((23 ± 2)°C) and a relative humidity of (50 ± 5)%.
‘Specific tensile strength’ (0 1 9) is ultimate tensile strength in pascals, equivalent to N/m2 divided by specific weight in N/m3, measured at a temperature of (296 ± 2) K ((23 ± 2)°C) and a relative humidity of (50 ± 5)%.
‘Spinning mass gyros’ (7) means gyros which use a continually rotating mass to sense angular motion.
‘Spread spectrum’ (5) means the technique whereby energy in a relatively narrow-band communication channel is spread over a much wider energy spectrum.
‘Spread spectrum’ radar (6) – see ‘Radar spread spectrum’.
‘Stability’ (7) means the standard deviation (1 sigma) of the variation of a particular parameter from its calibrated value measured under stable temperature conditions. This can be expressed as a function of time.
‘States (not) Party to the Chemical Weapon Convention’ (1) are those states for which the Convention on the Prohibition of the Development, Production, Stockpiling and Use of Chemical Weapons has (not) entered into force. (See www.opcw.org)
‘Steady State Mode’ (9) defines engine operation conditions, where the engine parameters, such as thrust/power, rpm and others, have no appreciable fluctuations, when the ambient air temperature and pressure at the engine inlet are constant.
‘Sub-orbital craft’ (9) means a craft having an enclosure designed for the transport of people or cargo which is designed to:
Operate above the stratosphere;
Perform a non-orbital trajectory; and
Land back on Earth with the people or cargo intact.
‘Substrate’ (3) means a sheet of base material with or without an interconnection pattern and on which or within which ‘discrete components’ or integrated circuits or both can be located.
N.B.1. ‘Discrete component’: a separately packaged ‘circuit element’ with its own external connections.
N.B.2. ‘Circuit element’: a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc.
‘Substrate blanks’ (3 6) means monolithic compounds with dimensions suitable for the production of optical elements such as mirrors or optical windows.
‘Sub-unit of toxin’ (1) is a structurally and functionally discrete component of a whole ‘toxin’.
‘Superalloys’ (2 9) means nickel-, cobalt- or iron-base alloys having a stress rupture life greater than 1 000 hours at 400 MPa at 922 K (649°C) or higher.
‘Superconductive’ (1 3 5 6 8) means materials, i.e., metals, alloys or compounds, which can lose all electrical resistance, i.e., which can attain infinite electrical conductivity and carry very large electrical currents without Joule heating.
NB: The ‘superconductive’ state of a material is individually characterised by a ‘critical temperature’, a critical magnetic field, which is a function of temperature, and a critical current density which is, however, a function of both magnetic field and temperature.
‘Super High Power Laser’ (‘SHPL’) (6) means a ‘laser’ capable of delivering (the total or any portion of) the output energy exceeding 1 kJ within 50 ms or having an average or CW power exceeding 20 kW.
‘Superplastic forming’ (1 2) means a deformation process using heat for metals that are normally characterised by low values of elongation (less than 20 %) at the breaking point as determined at room temperature by conventional tensile strength testing, in order to achieve elongations during processing which are at least 2 times those values.
‘Symmetric algorithm’ (5) means a cryptographic algorithm using an identical key for both encryption and decryption.
NB: A common use of ‘symmetric algorithms’ is confidentiality of data.
‘Tape’ (1) is a material constructed of interlaced or unidirectional ‘monofilaments’, ‘strands’, ‘rovings’, ‘tows’, or ‘yarns’, etc., usually pre-impregnated with resin.
NB: ‘Strand’ is a bundle of ‘monofilaments’ (typically over 200) arranged approximately parallel.
‘Technology’ (GTN NTN All) means specific information necessary for the ‘development’, ‘production’ or ‘use’ of goods. This information takes the form of ‘technical data’ or ‘technical assistance’.
N.B.1. ‘Technical assistance’ may take forms such as instructions, skills, training, working knowledge and consulting services and may involve the transfer of ‘technical data’.
N.B.2. ‘Technical data’ may take forms such as blueprints, plans, diagrams, models, formulae, tables, engineering designs and specifications, manuals and instructions written or recorded on other media or devices such as disk, tape, read-only memories.
‘Three dimensional integrated circuit’ (3) means a collection of semiconductor dies or active device layers, integrated together, and having through semiconductor via connections passing completely through an interposer, substrate, die or layer to establish interconnections between the device layers. An interposer is an interface that enables electrical connections.
‘Tilting spindle’ (2) means a tool-holding spindle which alters, during the machining process, the angular position of its centre line with respect to any other axis.
‘Time constant’ (6) is the time taken from the application of a light stimulus for the current increment to reach a value of 1-1/e times the final value (i.e., 63 % of the final value).
‘Time-to-steady-state registration’ (6) (also referred to as the gravimeter’s response time) is the time over which the disturbing effects of platform induced accelerations (high frequency noise) are reduced.
‘Tip shroud’ (9) means a stationary ring component (solid or segmented) attached to the inner surface of the engine turbine casing or a feature at the outer tip of the turbine blade, which primarily provides a gas seal between the stationary and rotating components.
‘Total control of flight’ (7) means an automated control of ‘aircraft’ state variables and flight path to meet mission objectives responding to real time changes in data regarding objectives, hazards or other ‘aircraft’.
‘Total digital transfer rate’ (5) means the number of bits, including line coding, overhead and so forth per unit time passing between corresponding equipment in a digital transmission system.
NB: See also ‘digital transfer rate’.
‘Tow’ (1) is a bundle of ‘monofilaments’, usually approximately parallel.
‘Toxins’ (1 2) means toxins in the form of deliberately isolated preparations or mixtures, no matter how produced, other than toxins present as contaminants of other materials such as pathological specimens, crops, foodstuffs or seed stocks of ‘microorganisms’.
‘Tunable’ (6) means the ability of a ‘laser’ to produce a continuous output at all wavelengths over a range of several ‘laser’ transitions. A line selectable ‘laser’ produces discrete wavelengths within one ‘laser’ transition and is not considered ‘tunable’.
‘Unidirectional positioning repeatability’ (2) means the smaller of values R↑ and R↓ (forward and backward), as defined by 3.21 of ISO 230-2:2014 or national equivalents, of an individual machine tool axis.
‘Unmanned Aerial Vehicle’ (‘UAV’) (9) means any aircraft capable of initiating flight and sustaining controlled flight and navigation without any human presence on board.
‘Uranium enriched in the isotopes 235 or 233’ (0) means uranium containing the isotopes 235 or 233, or both, in an amount such that the abundance ratio of the sum of these isotopes to the isotope 238 is more than the ratio of the isotope 235 to the isotope 238 occurring in nature (isotopic ratio 0,71 per cent).
‘Use’ (GTN NTN All) means operation, installation (including on-site installation), maintenance (checking), repair, overhaul and refurbishing.
‘User-accessible programmability’ (6) means the facility allowing a user to insert, modify or replace ‘programs’ by means other than:
A physical change in wiring or interconnections; or
The setting of function controls including entry of parameters.
‘Vaccine’ (1) is a medicinal product in a pharmaceutical formulation licensed by, or having marketing or clinical trial authorisation from, the regulatory authorities of either the country of manufacture or of use, which is intended to stimulate a protective immunological response in humans or animals in order to prevent disease in those to whom or to which it is administered.
‘Vacuum electronic devices’ (3) means electronic devices based on the interaction of an electron beam with an electromagnetic wave propagating in a vacuum circuit or interacting with radio-frequency vacuum cavity resonators. ‘Vacuum electronic devices’ include klystrons, travelling-wave tubes, and their derivatives.
‘Vulnerability disclosure’ (4) means the process of identifying, reporting or communicating a vulnerability to, or analysing a vulnerability with, individuals or organisations responsible for conducting or coordinating remediation for the purpose of resolving the vulnerability.
‘Yarn’ (1) is a bundle of twisted ‘strands’.
NB: ‘Strand’ is a bundle of ‘monofilaments’ (typically over 200) arranged approximately parallel.’
CATEGORY 0 – NUCLEAR MATERIALS, FACILITIES, AND EQUIPMENT
0ASystems, Equipment and Components
0A001‘Nuclear reactors’ and specially designed or prepared equipment and components therefor, as follows:
‘Nuclear reactors’;
Metal vessels, or major shop-fabricated parts therefor, including the reactor vessel head for a reactor pressure vessel, specially designed or prepared to contain the core of a ‘nuclear reactor’;
Manipulative equipment specially designed or prepared for inserting or removing fuel in a ‘nuclear reactor’;
Control rods specially designed or prepared for the control of the fission process in a ‘nuclear reactor’, support or suspension structures therefor, rod drive mechanisms and rod guide tubes;
Pressure tubes specially designed or prepared to contain both fuel elements and the primary coolant in a ‘nuclear reactor’;
Zirconium metal tubes or zirconium alloy tubes (or assembles of tubes) specially designed or prepared for use as fuel cladding in a ‘nuclear reactor’, and in quantities exceeding 10 kg;
NB: For zirconium pressure tubes see 0A001.e. and for calandria tubes see 0A001.h.
Coolant pumps or circulators specially designed or prepared for circulating the primary coolant of ‘nuclear reactors’;
‘Nuclear reactor internals’ specially designed or prepared for use in a ‘nuclear reactor’, including support columns for the core, fuel channels, calandria tubes, thermal shields, baffles, core grid plates, and diffuser plates;
Technical Note:
In 0A001.h. ‘nuclear reactor internals’ means any major structure within a reactor vessel which has one or more functions such as supporting the core, maintaining fuel alignment, directing primary coolant flow, providing radiation shields for the reactor vessel, and guiding in-core instrumentation.
Heat exchangers as follows:
Steam generators specially designed or prepared for the primary, or intermediate, coolant circuit of a ‘nuclear reactor’;
Other heat exchangers specially designed or prepared for use in the primary coolant circuit of a ‘nuclear reactor’;
Note: 0A001.i. does not control heat exchangers for the supporting systems of the reactor, e.g., the emergency cooling system or the decay heat cooling system.
Neutron detectors specially designed or prepared for determining neutron flux levels within the core of a ‘nuclear reactor’;
‘External thermal shields’ specially designed or prepared for use in a ‘nuclear reactor’ for the reduction of heat loss and also for the containment vessel protection.
Technical Note:
In 0A001.k. ‘external thermal shields’ means major structures placed over the reactor vessel which reduce heat loss from the reactor and reduce temperature within the containment vessel.
0BTest, Inspection and Production Equipment
0B001Plant for the separation of isotopes of ‘natural uranium’, ‘depleted uranium’ or‘special fissile materials’, and specially designed or prepared equipment and components therefor, as follows:
Plant specially designed for separating isotopes of ‘natural uranium’, ‘depleted uranium’, or ‘special fissile materials’, as follows:
Gas centrifuge separation plant;
Gaseous diffusion separation plant;
Aerodynamic separation plant;
Chemical exchange separation plant;
Ion-exchange separation plant;
Atomic vapour ‘laser’ isotope separation plant;
Molecular ‘laser’ isotope separation plant;
Plasma separation plant;
Electro magnetic separation plant;
Gas centrifuges and assemblies and components, specially designed or prepared for gas centrifuge separation process, as follows:
Technical Note:
In 0B001.b. ‘high strength-to-density ratio material’ means any of the following:
Maraging steel capable of an ultimate tensile strength of 1,95 GPa or more;
Aluminium alloys capable of an ultimate tensile strength of 0,46 GPa or more; or
‘Fibrous or filamentary materials’ with a ‘specific modulus’ of more than 3,18 × 106m and a ‘specific tensile strength’ greater than 7,62 × 104 m;
Gas centrifuges;
Complete rotor assemblies;
Rotor tube cylinders with a wall thickness of 12 mm or less, a diameter of between 75 mm and 650 mm, made from ‘high strength-to-density ratio materials’;
Rings or bellows with a wall thickness of 3 mm or less and a diameter of between 75 mm and 650 mm and designed to give local support to a rotor tube or to join a number together, made from ‘high strength-to-density ratio materials’;
Baffles of between 75 mm and 650 mm diameter for mounting inside a rotor tube, made from ‘high strength-to-density ratio materials’.
Top or bottom caps of between 75 mm and 650 mm diameter to fit the ends of a rotor tube, made from ‘high strength-to-density ratio materials’;
Magnetic suspension bearings as follows:
Bearing assemblies consisting of an annular magnet suspended within a housing made of or protected by ‘materials resistant to corrosion by UF6’ containing a damping medium and having the magnet coupling with a pole piece or second magnet fitted to the top cap of the rotor;
Active magnetic bearings specially designed or prepared for use with gas centrifuges.
Specially prepared bearings comprising a pivot-cup assembly mounted on a damper;
Molecular pumps comprised of cylinders having internally machined or extruded helical grooves and internally machined bores;
Ring-shaped motor stators for multiphase AC hysteresis (or reluctance) motors for synchronous operation within a vacuum at a frequency of 600 Hz or more and a power of 40 VA or more;
Centrifuge housing/recipients to contain the rotor tube assembly of a gas centrifuge, consisting of a rigid cylinder of wall thickness up to 30 mm with precision machined ends that are parallel to each other and perpendicular to the cylinder’s longitudinal axis to within 0,05 o or less;
Scoops consisting of specially designed or prepared tubes for the extraction of UF6 gas from within the rotor tube by a Pitot tube action and capable of being fixed to the central gas extraction system;
Frequency changers (converters or inverters) specially designed or prepared to supply motor stators for gas centrifuge enrichment, having all of the following characteristics, and specially designed components therefor:
A multiphase frequency output of 600 Hz or greater; and
High stability (with frequency control better than 0,2 %);
Shut-off and control valves as follows:
Shut-off valves specially designed or prepared to act on the feed, product or tails UF6 gaseous streams of an individual gas centrifuge;
Bellows-sealed valves, shut-off or control, made of or protected by ‘materials resistant to corrosion by UF6’, with an inside diameter of 10 mm to 160 mm, specially designed or prepared for use in main or auxiliary systems of gas centrifuge enrichment plants;
Equipment and components, specially designed or prepared for gaseous diffusion separation process, as follows:
Gaseous diffusion barriers made of porous metallic, polymer or ceramic ‘materials resistant to corrosion by UF6’ with a pore size of 10 to 100 nm, a thickness of 5 mm or less, and, for tubular forms, a diameter of 25 mm or less;
Gaseous diffuser housings made of or protected by ‘materials resistant to corrosion by UF6’;
Compressors or gas blowers with a suction volume capacity of 1 m3/min or more of UF6, with a discharge pressure up to 500 kPa, and having a pressure ratio of 10:1 or less, and made of or protected by ‘materials resistant to corrosion by UF6’;
Rotary shaft seals for compressors or blowers specified in 0B001.c.3. and designed for a buffer gas in-leakage rate of less than 1 000 cm3/min.;
Heat exchangers made of or protected by ‘materials resistant to corrosion by UF6’, and designed for a leakage pressure rate of less than 10 Pa per hour under a pressure differential of 100 kPa;
Bellows-sealed valves, manual or automated, shut-off or control, made of or protected by ‘materials resistant to corrosion by UF6’;
Equipment and components, specially designed or prepared for aerodynamic separation process, as follows:
Separation nozzles consisting of slit-shaped, curved channels having a radius of curvature less than 1 mm, resistant to corrosion by UF6, and having a knife-edge contained within the nozzle which separates the gas flowing through the nozzle into two streams;
Cylindrical or conical tubes, (vortex tubes), made of or protected by ‘materials resistant to corrosion by UF6’ and with one or more tangential inlets;
Compressors or gas blowers made of or protected by ‘materials resistant to corrosion by UF6’, and rotary shaft seals therefor;
Heat exchangers made of or protected by ‘materials resistant to corrosion by UF6’;
Separation element housings, made of or protected by ‘materials resistant to corrosion by UF6’ to contain vortex tubes or separation nozzles;
Bellows-sealed valves, manual or automated, shut-off or control, made of or protected by ‘materials resistant to corrosion by UF6’, with a diameter of 40 mm or more;
Process systems for separating UF6 from carrier gas (hydrogen or helium) to 1 ppm UF6 content or less, including:
Cryogenic heat exchangers and cryoseparators capable of temperatures of 153K (– 120°C) or less;
Cryogenic refrigeration units capable of temperatures of 153 K (– 120°C) or less;
Separation nozzle or vortex tube units for the separation of UF6 from carrier gas;
UF6 cold traps capable of freezing out UF6;
Equipment and components, specially designed or prepared for chemical exchange separation process, as follows:
Fast-exchange liquid-liquid pulse columns with stage residence time of 30 s or less and resistant to concentrated hydrochloric acid (e.g. made of or protected by suitable plastic materials such as fluorinated hydrocarbon polymers or glass);
Fast-exchange liquid-liquid centrifugal contactors with stage residence time of 30 s or less and resistant to concentrated hydrochloric acid (e.g. made of or protected by suitable plastic materials such as fluorinated hydrocarbon polymers or glass);
Electrochemical reduction cells resistant to concentrated hydrochloric acid solutions, for reduction of uranium from one valence state to another;
Electrochemical reduction cells feed equipment to take U+4 from the organic stream and, for those parts in contact with the process stream, made of or protected by suitable materials (e.g. glass, fluorocarbon polymers, polyphenyl sulphate, polyether sulfone and resin-impregnated graphite);
Feed preparation systems for producing high purity uranium chloride solution consisting of dissolution, solvent extraction and/or ion exchange equipment for purification and electrolytic cells for reducing the uranium U+6 or U+4 to U+3;
Uranium oxidation systems for oxidation of U+3 to U+4;
Equipment and components, specially designed or prepared for ion-exchange separation process, as follows:
Fast reacting ion-exchange resins, pellicular or porous macro-reticulated resins in which the active chemical exchange groups are limited to a coating on the surface of an inactive porous support structure, and other composite structures in any suitable form, including particles or fibres, with diameters of 0,2 mm or less, resistant to concentrated hydrochloric acid and designed to have an exchange rate half-time of less than 10 s and capable of operating at temperatures in the range of 373 K (100°C) to 473 K (200°C);
Ion exchange columns (cylindrical) with a diameter greater than 1 000 mm, made of or protected by materials resistant to concentrated hydrochloric acid (e.g. titanium or fluorocarbon plastics) and capable of operating at temperatures in the range of 373 K (100°C) to 473 K (200°C) and pressures above 0,7 MPa;
Ion exchange reflux systems (chemical or electrochemical oxidation or reduction systems) for regeneration of the chemical reducing or oxidizing agents used in ion exchange enrichment cascades;
Equipment and components, specially designed or prepared for laser-based separation processes using atomic vapour laser isotope separation, as follows:
Uranium metal vaporization systems designed to achieve a delivered power of 1 kW or more on the target for use in laser enrichment;
Liquid or vapour uranium metal handling systems specially designed or prepared for handling molten uranium, molten uranium alloys or uranium metal vapour for use in laser enrichment, and specially designed components therefor;
NB: SEE ALSO 2A225.
Product and tails collector assemblies for collecting uranium metal in liquid or solid form, made of or protected by materials resistant to the heat and corrosion of uranium metal vapour or liquid, such as yttria-coated graphite or tantalum;
Separator module housings (cylindrical or rectangular vessels) for containing the uranium metal vapour source, the electron beam gun and the product and tails collectors;
‘Lasers’ or ‘laser’ systems specially designed or prepared for the separation of uranium isotopes with a spectrum frequency stabilisation for operation over extended periods of time;
NB: SEE ALSO 6A005 AND 6A205.
Equipment and components, specially designed or prepared for laser-based separation processes using molecular laser isotope separation, as follows:
Supersonic expansion nozzles for cooling mixtures of UF6 and carrier gas to 150 K (– 123 °C) or less and made from ‘materials resistant to corrosion by UF6’;
Product or tails collector components or devices specially designed or prepared for collecting uranium material or uranium tails material following illumination with laser light, made of ‘materials resistant to corrosion by UF6’;
Compressors made of or protected by ‘materials resistant to corrosion by UF6’, and rotary shaft seals therefor;
Equipment for fluorinating UF5 (solid) to UF6 (gas);
Process systems for separating UF6 from carrier gas (e.g. nitrogen, argon or other gas) including:
Cryogenic heat exchangers and cryoseparators capable of temperatures of 153 K (– 120°C) or less;
Cryogenic refrigeration units capable of temperatures of 153 K (– 120°C) or less;
UF6 cold traps capable of freezing out UF6;
‘Lasers’ or ‘laser’ systems specially designed or prepared for the separation of uranium isotopes with a spectrum frequency stabilisation for operation over extended periods of time;
NB: SEE ALSO 6A005 AND 6A205.
Equipment and components, specially designed or prepared for plasma separation process, as follows:
Microwave power sources and antennae for producing or accelerating ions, with an output frequency greater than 30 GHz and mean power output greater than 50 kW;
Radio frequency ion excitation coils for frequencies of more than 100 kHz and capable of handling more than 40 kW mean power;
Uranium plasma generation systems;
Not used;
Product and tails collector assemblies for uranium metal in solid form,made of or protected by materials resistant to the heat and corrosion of uranium vapour such as yttria-coated graphite or tantalum;
Separator module housings (cylindrical) for containing the uranium plasma source, radio-frequency drive coil and the product and tails collectors and made of a suitable non-magnetic material (e.g. stainless steel);
Equipment and components, specially designed or prepared for electromagnetic separation process, as follows:
Ion sources, single or multiple, consisting of a vapour source, ioniser, and beam accelerator made of suitable non-magnetic materials (e.g. graphite, stainless steel, or copper) and capable of providing a total ion beam current of 50 mA or greater;
Ion collector plates for collection of enriched or depleted uranium ion beams, consisting of two or more slits and pockets and made of suitable non-magnetic materials (e.g. graphite or stainless steel);
Vacuum housings for uranium electromagnetic separators made of non-magnetic materials (e.g. stainless steel) and designed to operate at pressures of 0,1 Pa or lower;
Magnet pole pieces with a diameter greater than 2 m;
High voltage power supplies for ion sources, having all of the following characteristics:
Capable of continuous operation;
Output voltage of 20 000 V or greater;
Output current of 1 A or greater; and
Voltage regulation of better than 0,01 % over a period of 8 hours;
NB: SEE ALSO 3A227.
Magnet power supplies (high power, direct current) having all of the following characteristics:
Capable of continuous operation with a current output of 500 A or greater at a voltage of 100 V or greater; and
Current or voltage regulation better than 0,01 % over a period of 8 hours.
NB: SEE ALSO 3A226.
0B002Specially designed or prepared auxiliary systems, equipment and components as follows, for isotope separation plant specified in 0B001, made of or protected by ‘materials resistant to corrosion by UF6’:
Feed autoclaves, ovens or systems used for passing UF6 to the enrichment process;
Desublimers or cold traps, used to remove UF6 from the enrichment process for subsequent transfer upon heating;
Product and tails stations for transferring UF6 into containers;
Liquefaction or solidification stations used to remove UF6 from the enrichment process by compressing, cooling and converting UF6 to a liquid or solid form;
Piping systems and header systems specially designed or prepared for handling UF6 within gaseous diffusion, centrifuge or aerodynamic cascades;
Vacuum systems and pumps as follows:
Vacuum manifolds, vacuum headers or vacuum pumps having a suction capacity of 5 m3/minute or more;
Vacuum pumps specially designed for use in UF6 bearing atmospheres made of, or protected by, ‘materials resistant to corrosion by UF6’; or
Vacuum systems consisting of vacuum manifolds, vacuum headers and vacuum pumps, and designed for service in UF6-bearing atmospheres;
UF6 mass spectrometers/ion sources capable of taking on-line samples from UF6 gas streams and having all of the following characteristics:
Capable of measuring ions of 320 atomic mass units or greater and having a resolution of better than 1 part in 320;
Ion sources constructed of or protected by nickel, nickel-copper alloys with a nickel content of 60 % or more by weight, or nickel-chrome alloys;
Electron bombardment ionisation sources; and
Having a collector system suitable for isotopic analysis.
0B003Plant for the conversion of uranium and equipment specially designed or prepared therefor, as follows:
Systems for the conversion of uranium ore concentrates to UO3;
Systems for the conversion of UO3 to UF6;
Systems for the conversion of UO3 to UO2;
Systems for the conversion of UO2 to UF4;
Systems for the conversion of UF4 to UF6;
Systems for the conversion of UF4 to uranium metal;
Systems for the conversion of UF6 to UO2;
Systems for the conversion of UF6 to UF4;
Systems for the conversion of UO2 to UCl4.
0B004Plant for the production or concentration of heavy water, deuterium and deuterium compounds and specially designed or prepared equipment and components therefor, as follows:
Plant for the production of heavy water, deuterium or deuterium compounds, as follows:
Water-hydrogen sulphide exchange plants;
Ammonia-hydrogen exchange plants;
Equipment and components, as follows:
Water-hydrogen sulphide exchange towers with diameters of 1,5 m or more, capable of operating at pressures greater than or equal to 2 MPa;
Single stage, low head (i.e., 0,2 MPa) centrifugal blowers or compressors for hydrogen sulphide gas circulation (i.e., gas containing more than 70 % by weight hydrogen sulphide, H2S) with a throughput capacity greater than or equal to 56 m3/s when operating at pressures greater than or equal to 1,8 MPa suction and having seals designed for wet H2S service;
Ammonia-hydrogen exchange towers greater than or equal to 35 m in height with diameters of 1,5 m to 2,5 m capable of operating at pressures greater than 15 MPa;
Tower internals, including stage contactors, and stage pumps, including those which are submersible, for heavy water production utilizing the ammonia-hydrogen exchange process;
Ammonia crackers with operating pressures greater than or equal to 3 MPa for heavy water production utilizing the ammonia-hydrogen exchange process;
Infrared absorption analysers capable of on-line hydrogen/deuterium ratio analysis where deuterium concentrations are equal to or greater than 90 % by weight;
Catalytic burners for the conversion of enriched deuterium gas into heavy water utilizing the ammonia-hydrogen exchange process;
Complete heavy water upgrade systems, or columns therefor, for the upgrade of heavy water to reactor-grade deuterium concentration;
Ammonia synthesis converters or synthesis units specially designed or prepared for heavy water production utilizing the ammonia-hydrogen exchange process.
0B005Plant specially designed for the fabrication of ‘nuclear reactor’ fuel elements and specially designed or prepared equipment therefor.
Technical Note:
Specially designed or prepared equipment for the fabrication of ‘nuclear reactor’ fuel elements includes equipment which:
Normally comes into direct contact with or directly processes or controls the production flow of nuclear materials;
Seals the nuclear materials within the cladding;
Checks the integrity of the cladding or the seal;
Checks the finish treatment of the sealed fuel; or
Is used for assembling reactor elements.
0B006Plant for the reprocessing of irradiated ‘nuclear reactor’ fuel elements, and specially designed or prepared equipment and components therefor.
Note: 0B006 includes:
Plant for the reprocessing of irradiated ‘nuclear reactor’ fuel elements including equipment and components which normally come into direct contact with and directly control the irradiated fuel and the major nuclear material and fission product processing streams;
Fuel element decladding equipment and chopping or shredding machines, i.e., remotely operated equipment to cut, chop or shear irradiated ‘nuclear reactor’ fuel assemblies, bundles or rods;
Dissolver vessels or dissolvers employing mechanical devices specially designed or prepared for the dissolution of irradiated ‘nuclear reactor’ fuel, which are capable of withstanding hot, highly corrosive liquids, and which can be remotely loaded, operated and maintained;
Solvent extractors, such as packed or pulsed columns, mixer settlers or centrifugal contractors, resistant to the corrosive effects of nitric acid and specially designed or prepared for use in a plant for the reprocessing of irradiated ‘natural uranium’, ‘depleted uranium’ or ‘special fissile materials’;
Holding or storage vessels specially designed to be critically safe and resistant to the corrosive effects of nitric acid;
Technical Note:
Holding or storage vessels may have the following features:
Walls or internal structures with a boron equivalent (calculated for all constituent elements as defined in the note to 0C004) of at least two per cent;
A maximum diameter of 175 mm for cylindrical vessels; or
A maximum width of 75 mm for either a slab or annular vessel.
Neutron measurement systems specially designed or prepared for integration and use with automated process control systems in a plant for the reprocessing of irradiated ‘natural uranium’, ‘depleted uranium’ or ‘special fissile materials’.
0B007Plant for the conversion of plutonium and equipment specially designed or prepared therefor, as follows:
Systems for the conversion of plutonium nitrate to oxide;
Systems for plutonium metal production.
0CMaterials
0C001‘Natural uranium’ or ‘depleted uranium’ or thorium in the form of metal, alloy, chemical compound or concentrate and any other material containing one or more of the foregoing;
Note: 0C001 does not control the following:
Four grammes or less of ‘natural uranium’ or ‘depleted uranium’ when contained in a sensing component in instruments;
‘Depleted uranium’ specially fabricated for the following civil non-nuclear applications:
Shielding;
Packaging;
Ballasts having a mass not greater than 100 kg;
Counter-weights having a mass not greater than 100 kg;
Alloys containing less than 5 % thorium;
Ceramic products containing thorium, which have been manufactured for non-nuclear use.
0C002‘Special fissile materials’
Note: 0C002 does not control four ‘effective grammes’ or less when contained in a sensing component in instruments.
0C003Deuterium, heavy water (deuterium oxide) and other compounds of deuterium, and mixtures and solutions containing deuterium, in which the isotopic ratio of deuterium to hydrogen exceeds 1:5 000.
0C004Graphite having a purity level better than 5 parts per million ‘boron equivalent’ and with a density greater than 1,50 g/cm3 for use in a ‘nuclear reactor’, in quantities exceeding 1 kg.
NB: SEE ALSO 1C107.
Note 1: For the purpose of export control, the competent authorities of the EU Member State in which the exporter is established will determine whether or not the exports of graphite meeting the above specifications are for ‘nuclear reactor’ use. 0C004 does not control graphite having a purity level better than 5 ppm (parts per million) boron equivalent and with a density greater than 1,50 g/cm3 not for use in a ‘nuclear reactor’.
Note 2: In 0C004, ‘boron equivalent’ (BE) is defined as the sum of BEz for impurities (excluding BEcarbon since carbon is not considered an impurity) including boron, where:
BEZ (ppm) = CF × concentration of element Z in ppm;
and σΒ and σΖ are the thermal neutron capture cross sections (in barns) for naturally occurring boron and element Z respectively; and AB and AZ are the atomic masses of naturally occurring boron and element Z respectively.
0C005Specially prepared compounds or powders for the manufacture of gaseous diffusion barriers, resistant to corrosion by UF6 (e.g. nickel or alloys containing 60 % by weight or more nickel, aluminium oxide and fully fluorinated hydrocarbon polymers), having a purity of 99,9 % by weight or more and a particle size less than 10 μm measured by ASTM B330 standard and a high degree of particle size uniformity.
0DSoftware
0D001‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of goods specified in this Category.
0ETechnology
0E001‘Technology’ according to the Nuclear Technology Note for the ‘development’, ‘production’ or ‘use’ of goods specified in this Category.
CATEGORY 1 – SPECIAL MATERIALS AND RELATED EQUIPMENT
1ASystems, Equipment and Components
1A001Components made from fluorinated compounds, as follows:
Seals, gaskets, sealants or fuel bladders, specially designed for ‘aircraft’ or aerospace use, made from more than 50 % by weight of any of the materials specified in 1C009.b. or 1C009.c.;
Not used;
Not used.
1A002‘Composite’ structures or laminates, as follows:
NB: SEE ALSO 1A202, 9A010 and 9A110.
Made from any of the following:
An organic ‘matrix’ and ‘fibrous or filamentary materials’ specified in 1C010.c. or 1C010.d.: or
Prepregs or preforms specified in 1C010.e.;
Made from a metal or carbon ‘matrix’, and any of the following:
Carbon ‘fibrous or filamentary materials’ having all of the following:
A ‘specific modulus’ exceeding 10,15 × 106 m; and
A ‘specific tensile strength’ exceeding 17,7 × 104 m; or
Materials specified in 1C010.c.
Note 1: 1A002 does not control ‘composite’ structures or laminates made from epoxy resin impregnated carbon ‘fibrous or filamentary materials’ for the repair of ‘civil aircraft’ structures or laminates, having all of the following:
An area not exceeding 1 m2;
A length not exceeding 2,5 m; and
A width exceeding 15 mm.
Note 2: 1A002 does not control semi-finished items, specially designed for purely civilian applications as follows:
Sporting goods;
Automotive industry;
Machine tool industry;
Medical applications.
Note 3: 1A002.b.1. does not control semi-finished items containing a maximum of two dimensions of interwoven filaments and specially designed for applications as follows:
Metal heat-treatment furnaces for tempering metals;
Silicon boule production equipment.
Note 4: 1A002 does not control finished items specially designed for a specific application.
Note 5: 1A002.b.1. does not control mechanically chopped, milled, or cut carbon ‘fibrous or filamentary materials’ 25,0 mm or less in length.
1A003Manufactures of non-‘fusible’ aromatic polyimides in film, sheet, tape or ribbon form having any of the following:
A thickness exceeding 0,254 mm; or
Coated or laminated with carbon, graphite, metals or magnetic substances.
Note: 1A003 does not control manufactures when coated or laminated with copper and designed for the production of electronic printed circuit boards.
NB: For ‘fusible’ aromatic polyimides in any form, see 1C008.a.3.
1A004Protective and detection equipment and components not specially designed for military use, as follows:
NB: SEE ALSO MILITARY GOODS CONTROLS, 2B351 AND 2B352.
Full face masks, filter canisters and decontamination equipment therefor, designed or modified for defence against any of the following, and specially designed components therefor:
Note: 1A004.a. includes Powered Air Purifying Respirators (PAPR) that are designed or modified for defence against agents or materials, listed in 1A004.a.
Technical Note:
For the purposes of 1A004.a.:
Full face masks are also known as gas masks.
Filter canisters include filter cartridges.
‘Biological agents’;
‘Radioactive materials’;
Chemical warfare (CW) agents; or
‘Riot control agents’, including:
α-Bromobenzeneacetonitrile, (Bromobenzyl cyanide) (CA) (CAS 5798-79-8);
[(2-Chlorophenyl) methylene] propanedinitrile, (o-Chlorobenzylidenemalononitrile) (CS) (CAS 2698-41-1);
2-Chloro-1-phenylethanone, Phenylacyl chloride (ω-chloroacetophenone) (CN) (CAS 532-27-4);
Dibenz-(b,f)-1,4-oxazephine (CR) (CAS 257-07-8);
10-Chloro-5,10-dihydrophenarsazine, (Phenarsazine chloride), (Adamsite), (DM) (CAS 578-94-9);
N-Nonanoylmorpholine, (MPA) (CAS 5299-64-9);
Protective suits, gloves and shoes, specially designed or modified for defence against any of the following:
‘Biological agents’;
‘Radioactive materials’; or
Chemical warfare (CW) agents;
Detection systems, specially designed or modified for detection or identification of any of the following, and specially designed components therefor:
‘Biological agents’;
‘Radioactive materials’; or
Chemical warfare (CW) agents.
Electronic equipment designed for automatically detecting or identifying the presence of ‘explosives’ residues and utilising ‘trace detection’ techniques (e.g., surface acoustic wave, ion mobility spectrometry, differential mobility spectrometry, mass spectrometry).
Technical Note:
‘Trace detection’ is defined as the capability to detect less than 1 ppm vapour, or 1 mg solid or liquid.
Note 1: 1A004.d. does not control equipment specially designed for laboratory use.
Note 2: 1A004.d. does not control non-contact walk-through security portals.
Note: 1A004 does not control:
Personal radiation monitoring dosimeters;
Occupational health or safety equipment limited by design or function to protect against hazards specific to residential safety or civil industries, including:
mining;
quarrying;
agriculture;
pharmaceutical;
medical;
veterinary;
environmental;
waste management;
food industry.
Technical Notes:
1. 1A004 includes equipment and components that have been identified, successfully tested to national standards or otherwise proven effective, for the detection of or defence against ‘radioactive materials’, ‘biological agents’, chemical warfare agents, ‘simulants’ or ‘riot control agents’, even if such equipment or components are used in civil industries such as mining, quarrying, agriculture, pharmaceuticals, medical, veterinary, environmental, waste management, or the food industry.
2. ‘Simulant’ is a substance or material that is used in place of toxic agent (chemical or biological) in training, research, testing or evaluation.
3. For the purposes of 1A004, ‘radioactive materials’ are those selected or modified to increase their effectiveness in producing casualties in humans or animals, degrading equipment or damaging crops or the environment.
1A005Body armour and components therefor, as follows:
NB: SEE ALSO MILITARY GOODS CONTROLS.
Soft body armour not manufactured to military standards or specifications, or to their equivalents, and specially designed components therefor;
Hard body armour plates providing ballistic protection equal to or less than level IIIA (NIJ 0101.06, July 2008), or ‘equivalent standards’.
NB: For ‘fibrous or filamentary materials’ used in the manufacture of body armour, see 1C010.
Note 1: 1A005 does not control body armour when accompanying its user for the user’s own personal protection.
Note 2: 1A005 does not control body armour designed to provide frontal protection only from both fragment and blast from non-military explosive devices.
Note 3: 1A005 does not control body armour designed to provide protection only from knife, spike, needle or blunt trauma.
1A006Equipment, specially designed or modified for the disposal of Improvised Explosive Devices (IEDs), as follows, and specially designed components and accessories therefor:
NB: SEE ALSO MILITARY GOODS CONTROLS.
Remotely operated vehicles;
‘Disruptors’.
Technical Note:
For the purposes of 1A006.b. ‘disruptors’ are devices specially designed for the purpose of preventing the operation of an explosive device by projecting a liquid, solid or frangible projectile.
Note: 1A006 does not control equipment when accompanying its operator.
1A007Equipment and devices, specially designed to initiate charges and devices containing ‘energetic materials’, by electrical means, as follows:
NB: SEE ALSO MILITARY GOODS CONTROLS, 3A229 AND 3A232.
Explosive detonator firing sets designed to drive explosive detonators specified in 1A007.b.;
Electrically driven explosive detonators as follows:
Exploding bridge (EB);
Exploding bridge wire (EBW);
Slapper;
Exploding foil initiators (EFI).
Technical Notes:
1. The word initiator or igniter is sometimes used in place of the word detonator.
2. For the purpose of 1A007.b. the detonators of concern all utilise a small electrical conductor (bridge, bridge wire, or foil) that explosively vaporises when a fast, high-current electrical pulse is passed through it. In non-slapper types, the exploding conductor starts a chemical detonation in a contacting high explosive material such as PETN (pentaerythritoltetranitrate). In slapper detonators, the explosive vaporization of the electrical conductor drives a flyer or slapper across a gap, and the impact of the slapper on an explosive starts a chemical detonation. The slapper in some designs is driven by magnetic force. The term exploding foil detonator may refer to either an EB or a slapper-type detonator.
1A008Charges, devices and components, as follows:
‘Shaped charges’ having all of the following:
Net Explosive Quantity (NEQ) greater than 90 g; and
Outer casing diameter equal to or greater than 75 mm;
Linear shaped cutting charges having all of the following, and specially designed components therefor:
An explosive load greater than 40 g/m; and
A width of 10 mm or more;
Detonating cord with explosive core load greater than 64 g/m;
Cutters, other than those specified in 1A008.b., and severing tools, having a Net Explosive Quantity (NEQ) greater than 3,5 kg.
Technical Note:
‘Shaped charges’ are explosive charges shaped to focus the effects of the explosive blast.
1A102Resaturated pyrolized carbon-carbon components designed for space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
1A202Composite structures, other than those specified in 1A002, in the form of tubes and having both of the following characteristics:
NB: SEE ALSO 9A010 AND 9A110.
An inside diameter of between 75 mm and 400 mm; and
Made with any of the ‘fibrous or filamentary materials’ specified in 1C010.a. or b. or 1C210.a. or with carbon prepreg materials specified in 1C210.c.
1A225Platinized catalysts specially designed or prepared for promoting the hydrogen isotope exchange reaction between hydrogen and water for the recovery of tritium from heavy water or for the production of heavy water.
1A226Specialized packings which may be used in separating heavy water from ordinary water, having both of the following characteristics:
Made of phosphor bronze mesh chemically treated to improve wettability; and
Designed to be used in vacuum distillation towers.
1A227High-density (lead glass or other) radiation shielding windows, having all of the following characteristics, and specially designed frames therefor:
A ‘cold area’ greater than 0,09 m2;
A density greater than 3 g/cm3; and
A thickness of 100 mm or greater.
Technical Note:
In 1A227 the term ‘cold area’ means the viewing area of the window exposed to the lowest level of radiation in the design application.
1BTest, Inspection and Production Equipment
1B001Equipment for the production or inspection of ‘composite’ structures or laminates specified in 1A002 or ‘fibrous or filamentary materials’ specified in 1C010, as follows, and specially designed components and accessories therefor:
NB: SEE ALSO 1B101 AND 1B201.
Filament winding machines, of which the motions for positioning, wrapping and winding fibres are coordinated and programmed in three or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ structures or laminates, from ‘fibrous or filamentary materials’;
‘Tape-laying machines’, of which the motions for positioning and laying tape are coordinated and programmed in five or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ airframe or ‘missile’ structures;
Note: In 1B001.b., ‘missile’ means complete rocket systems and unmanned aerial vehicle systems.
Technical Note:
For the purposes of 1B001.b., ‘tape-laying machines’ have the ability to lay one or more ‘filament bands’ limited to widths greater than 25,4 mm and less than or equal to 304,8 mm, and to cut and restart individual ‘filament band’ courses during the laying process.
Multidirectional, multidimensional weaving machines or interlacing machines, including adapters and modification kits, specially designed or modified for weaving, interlacing or braiding fibres, for ‘composite’ structures;
Technical Note:
For the purposes of 1B001.c., the technique of interlacing includes knitting.
Equipment specially designed or adapted for the production of reinforcement fibres, as follows:
Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon, pitch or polycarbosilane) into carbon fibres or silicon carbide fibres, including special equipment to strain the fibre during heating;
Equipment for the chemical vapour deposition of elements or compounds, on heated filamentary substrates, to manufacture silicon carbide fibres;
Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide);
Equipment for converting aluminium containing precursor fibres into alumina fibres by heat treatment;
Equipment for producing prepregs specified in 1C010.e. by the hot melt method;
Non-destructive inspection equipment specially designed for ‘composite’ materials, as follows:
X-ray tomography systems for three dimensional defect inspection;
Numerically controlled ultrasonic testing machines of which the motions for positioning transmitters or receivers are simultaneously coordinated and programmed in four or more axes to follow the three dimensional contours of the component under inspection;
‘Tow-placement machines’, of which the motions for positioning and laying tows are coordinated and programmed in two or more ‘primary servo positioning’ axes, specially designed for the manufacture of ‘composite’ airframe or ‘missile’ structures.
Technical Note:
For the purposes of 1B001.g., ‘tow-placement machines’ have the ability to place one or more ‘filament bands’ having widths less than or equal to 25,4 mm, and to cut and restart individual ‘filament band’ courses during the placement process.
Technical Notes:
1. For the purpose of 1B001, ‘primary servo positioning’ axes control, under computer program direction, the position of the end effector (i.e., head) in space relative to the work piece at the correct orientation and direction to achieve the desired process.
2. For the purposes of 1B001, a ‘filament band’ is a single continuous width of fully or partially resin-impregnated tape, tow or fibre. Fully or partially resin-impregnated ‘filament bands’ include those coated with dry powder that tacks upon heating.
1B002Equipment designed to produce metal alloy powder or particulate materials, and having all of the following:
Specially designed to avoid contamination; and
Specially designed for use in one of the processes specified in 1C002.c.2.
NB: SEE ALSO 1B102.
1B003Tools, dies, moulds or fixtures, for ‘superplastic forming’ or ‘diffusion bonding’ titanium, aluminium or their alloys, specially designed for the manufacture of any of the following:
Airframe or aerospace structures;
‘Aircraft’ or aerospace engines; or
Specially designed components for structures specified in 1B003.a. or for engines specified in 1B003.b.
1B101Equipment, other than that specified in 1B001, for the ‘production’ of structural composites as follows; and specially designed components and accessories therefor:
NB: SEE ALSO 1B201.
Note: Components and accessories specified in 1B101 include moulds, mandrels, dies, fixtures and tooling for the preform pressing, curing, casting, sintering or bonding of composite structures, laminates and manufactures thereof.
Filament winding machines or fibre placement machines, of which the motions for positioning, wrapping and winding fibres can be coordinated and programmed in three or more axes, designed to fabricate composite structures or laminates from ‘fibrous or filamentary materials’, and coordinating and programming controls;
Tape-laying machines of which the motions for positioning and laying tape and sheets can be coordinated and programmed in two or more axes, designed for the manufacture of composite airframe and ‘missile’ structures;
Equipment designed or modified for the ‘production’ of ‘fibrous or filamentary materials’ as follows:
Equipment for converting polymeric fibres (such as polyacrylonitrile, rayon or polycarbosilane) including special provision to strain the fibre during heating;
Equipment for the vapour deposition of elements or compounds on heated filament substrates;
Equipment for the wet-spinning of refractory ceramics (such as aluminium oxide);
Equipment designed or modified for special fibre surface treatment or for producing prepregs and preforms specified in entry 9C110.
Note: 1B101.d. includes rollers, tension stretchers, coating equipment, cutting equipment and clicker dies.
1B102Metal powder ‘production equipment’, other than that specified in 1B002, and components as follows:
NB: SEE ALSO 1B115.b.
Metal powder ‘production equipment’ usable for the ‘production’, in a controlled environment, of spherical, spheroidal or atomised materials specified in 1C011.a., 1C011.b., 1C111.a.1., 1C111.a.2. or in the Military Goods Controls.
Specially designed components for ‘production equipment’ specified in 1B002 or 1B102.a.
Note: 1B102 includes:
Plasma generators (high frequency arc-jet) usable for obtaining sputtered or spherical metallic powders with organization of the process in an argon-water environment;
Electroburst equipment usable for obtaining sputtered or spherical metallic powders with organization of the process in an argon-water environment;
Equipment usable for the ‘production’ of spherical aluminium powders by powdering a melt in an inert medium (e.g. nitrogen).
1B115Equipment, other than that specified in 1B002 or 1B102, for the production of propellant and propellant constituents, as follows, and specially designed components therefor:
‘Production equipment’ for the ‘production’, handling or acceptance testing of liquid propellants or propellant constituents specified in 1C011.a., 1C011.b., 1C111 or in the Military Goods Controls;
‘Production equipment’ for the ‘production’, handling, mixing, curing, casting, pressing, machining, extruding or acceptance testing of solid propellants or propellant constituents specified in 1C011.a., 1C011.b., 1C111 or in the Military Goods Controls.
Note: 1B115.b. does not control batch mixers, continuous mixers or fluid energy mills. For the control of batch mixers, continuous mixers and fluid energy mills see 1B117, 1B118 and 1B119.
Note 1: For equipment specially designed for the production of military goods, see the Military Goods Controls.
Note 2: 1B115 does not control equipment for the ‘production’, handling and acceptance testing of boron carbide.
1B116Specially designed nozzles for producing pyrolitically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose in the 1 573 K (1 300 °C) to 3 173 K (2 900 °C) temperature range at pressures of 130 Pa to 20 kPa.
1B117Batch mixers having all of the following, and specially designed components therefor:
Designed or modified for mixing under vacuum in the range of zero to 13,326 kPa:
Capable of controlling the temperature of the mixing chamber;
A total volumetric capacity of 110 litres or more; and
At least one ‘mixing/kneading shaft’ mounted off centre.
Note: In 1B117.d. the term ‘mixing/kneading shaft’ does not refer to deagglomerators or knife-spindles.
1B118Continuous mixers having all of the following, and specially designed components therefor:
Designed or modified for mixing under vacuum in the range of zero to 13,326 kPa;
Capable of controlling the temperature of the mixing chamber;
any of the following,:
Two or more mixing/kneading shafts; or
All of the following:
A single rotating and oscillating shaft with kneading teeth/pins; and
Kneading teeth/pins inside the casing of the mixing chamber.
1B119Fluid energy mills usable for grinding or milling substances specified in 1C011.a., 1C011.b., 1C111 or in the Military Goods Controls, and specially designed components therefor.
1B201Filament winding machines, other than those specified in 1B001 or 1B101, and related equipment, as follows:
Filament winding machines having all of the following characteristics:
Having motions for positioning, wrapping, and winding fibres coordinated and programmed in two or more axes;
Specially designed to fabricate composite structures or laminates from ‘fibrous or filamentary materials’; and
Capable of winding cylindrical tubes with an internal diameter between 75 and 650 mm and lengths of 300 mm or greater;
Coordinating and programming controls for the filament winding machines specified in 1B201.a.;
Precision mandrels for the filament winding machines specified in 1B201.a.
1B225Electrolytic cells for fluorine production with an output capacity greater than 250 g of fluorine per hour.
1B226Electromagnetic isotope separators designed for, or equipped with, single or multiple ion sources capable of providing a total ion beam current of 50 mA or greater.
Note: 1B226 includes separators:
Capable of enriching stable isotopes;
With the ion sources and collectors both in the magnetic field and those configurations in which they are external to the field.
1B228Hydrogen-cryogenic distillation columns having all of the following characteristics:
Designed for operation with internal temperatures of 35 K (– 238 °C) or less;
Designed for operation at an internal pressure of 0,5 to 5 MPa;
Constructed of either:
Stainless steel of the Society of Automotive Engineers International (SAE) 300 series with low sulphur content and with an austenitic ASTM (or equivalent standard) grain size number of 5 or greater; or
Equivalent materials which are both cryogenic and hydrogen (H2)-compatible; and
With internal diameters of 30 cm or greater and ‘effective lengths’ of 4 m or greater.
Technical Note:
In 1B228 ‘effective length’ means the active height of packing material in a packed-type column, or the active height of internal contactor plates in a plate-type column.
1B230Pumps capable of circulating solutions of concentrated or dilute potassium amide catalyst in liquid ammonia (KNH2/NH3), having all of the following characteristics:
Airtight (i.e., hermetically sealed);
A capacity greater than 8,5 m3/h; and
Either of the following characteristics:
For concentrated potassium amide solutions (1 % or greater), an operating pressure of 1,5 to 60 MPa; or
For dilute potassium amide solutions (less than 1 %), an operating pressure of 20 to 60 MPa.
1B231Tritium facilities or plants, and equipment therefor, as follows:
Facilities or plants for the production, recovery, extraction, concentration, or handling of tritium;
Equipment for tritium facilities or plants, as follows:
Hydrogen or helium refrigeration units capable of cooling to 23 K (– 250 °C) or less, with heat removal capacity greater than 150 W;
Hydrogen isotope storage or hydrogen isotope purification systems using metal hydrides as the storage or purification medium.
1B232Turboexpanders or turboexpander-compressor sets having both of the following characteristics:
Designed for operation with an outlet temperature of 35 K (– 238 °C) or less; and
Designed for a throughput of hydrogen gas of 1 000 kg/h or greater.
1B233Lithium isotope separation facilities or plants, and systems and equipment therefor, as follows:
Facilities or plants for the separation of lithium isotopes;
Equipment for the separation of lithium isotopes based on the lithium-mercury amalgam process, as follows:
Packed liquid-liquid exchange columns specially designed for lithium amalgams;
Mercury or lithium amalgam pumps;
Lithium amalgam electrolysis cells;
Evaporators for concentrated lithium hydroxide solution;
Ion exchange systems specially designed for lithium isotope separation, and specially designed components therefor;
Chemical exchange systems (employing crown ethers, cryptands, or lariat ethers), specially designed for lithium isotope separation, and specially designed components therefor.
1B234High explosive containment vessels, chambers, containers and other similar containment devices designed for the testing of high explosives or explosive devices and having both of the following characteristics:
NB: SEE ALSO MILITARY GOODS CONTROLS.
Designed to fully contain an explosion equivalent to 2 kg of trinitrotoluene (TNT) or greater; and
Having design elements or features enabling real time or delayed transfer of diagnostic or measurement information.
1B235Target assemblies and components for the production of tritium as follows:
Target assemblies made of or containing lithium enriched in the lithium-6 isotope specially designed for the production of tritium through irradiation, including insertion in a nuclear reactor;
Components specially designed for the target assemblies specified in 1B235.a.
Technical Note:
Components specially designed for target assemblies for the production of tritium may include lithium pellets, tritium getters, and specially-coated cladding.
1CMaterials
Technical Note:
Wrought or worked materials fabricated by rolling, drawing, extruding, forging, impact extruding, pressing, graining, atomising, and grinding, i.e.: angles, channels, circles, discs, dust, flakes, foils and leaf, forging, plate, powder, pressings and stampings, ribbons, rings, rods (including bare welding rods, wire rods, and rolled wire), sections, shapes, sheets, strip, pipe and tubes (including tube rounds, squares, and hollows), drawn or extruded wire;
Cast material produced by casting in sand, die, metal, plaster or other types of moulds, including high pressure castings, sintered forms, and forms made by powder metallurgy.
1C001Materials specially designed for absorbing electromagnetic radiation, or intrinsically conductive polymers, as follows:
NB: SEE ALSO 1C101.
Materials for absorbing frequencies exceeding 2 × 108 Hz but less than 3 × 1012 Hz;
Note 1: 1C001.a. does not control:
Hair type absorbers, constructed of natural or synthetic fibres, with non-magnetic loading to provide absorption;
Absorbers having no magnetic loss and whose incident surface is non-planar in shape, including pyramids, cones, wedges and convoluted surfaces;
Planar absorbers, having all of the following:
Made from any of the following:
Plastic foam materials (flexible or non-flexible) with carbon-loading, or organic materials, including binders, providing more than 5 % echo compared with metal over a bandwidth exceeding ± 15 % of the centre frequency of the incident energy, and not capable of withstanding temperatures exceeding 450 K (177 °C); or
Ceramic materials providing more than 20 % echo compared with metal over a bandwidth exceeding ± 15 % of the centre frequency of the incident energy, and not capable of withstanding temperatures exceeding 800 K (527 °C);
Technical Note:
Absorption test samples for 1C001.a. Note: 1.c.1. should be a square at least 5 wavelengths of the centre frequency on a side and positioned in the far field of the radiating element.
Tensile strength less than 7 × 106 N/m2; and
Compressive strength less than 14 × 106 N/m2;
Planar absorbers made of sintered ferrite, having all of the following:
A specific gravity exceeding 4,4; and
A maximum operating temperature of 548 K (275 °C) or less;
Planar absorbers having no magnetic loss and fabricated from ‘open-cell foam’ plastic material with a density of 0,15 g/cm3 or less.
Technical Note:
‘Open-cell foams’ are flexible and porous materials, having an inner structure open to the atmosphere. ‘Open-cell foams’ are also known as reticulated foams.
Note 2: Nothing in Note 1 to 1C001.a. releases magnetic materials to provide absorption when contained in paint.
Materials not transparent to visible light and specially designed for absorbing near-infrared radiation having a wavelength exceeding 810 nm but less than 2 000 nm (frequencies exceeding 150 THz but less than 370 THz);
Note: 1C001.b. does not control materials, specially designed or formulated for any of the following applications:
‘Laser’ marking of polymers; or
‘Laser’ welding of polymers.
Intrinsically conductive polymeric materials with a ‘bulk electrical conductivity’ exceeding 10 000 S/m (Siemens per metre) or a ‘sheet (surface) resistivity’ of less than 100 ohms/square, based on any of the following polymers:
Polyaniline;
Polypyrrole;
Polythiophene;
Poly phenylene-vinylene; or
Poly thienylene-vinylene.
Note: 1C001.c. does not control materials in a liquid form.
Technical Note:
‘Bulk electrical conductivity’ and ‘sheet (surface) resistivity’ should be determined using ASTM D-257 or national equivalents.
1C002Metal alloys, metal alloy powder and alloyed materials, as follows:
NB: SEE ALSO 1C202.
Note: 1C002 does not control metal alloys, metal alloy powder and alloyed materials, specially formulated for coating purposes.
Technical Notes:
1. The metal alloys in 1C002 are those containing a higher percentage by weight of the stated metal than of any other element.
2. ‘Stress-rupture life’ should be measured in accordance with ASTM standard E-139 or national equivalents.
3. ‘Low cycle fatigue life’ should be measured in accordance with ASTM standard E-606 ‘Recommended Practice for Constant-Amplitude Low-Cycle Fatigue Testing’ or national equivalents. Testing should be axial with an average stress ratio equal to 1 and a stress-concentration factor (Kt) equal to 1. The average stress ratio is defined as maximum stress minus minimum stress divided by maximum stress.
Aluminides, as follows:
Nickel aluminides containing a minimum of 15 % by weight aluminium, a maximum of 38 % by weight aluminium and at least one additional alloying element;
Titanium aluminides containing 10 % by weight or more aluminium and at least one additional alloying element;
Metal alloys, as follows, made from the powder or particulate material specified in 1C002.c.:
Nickel alloys having any of the following:
A ‘stress-rupture life’ of 10 000 hours or longer at 923 K (650 °C) at a stress of 676 MPa; or
A ‘low cycle fatigue life’ of 10 000 cycles or more at 823 K (550 °C) at a maximum stress of 1 095 MPa;
Niobium alloys having any of the following:
A ‘stress-rupture life’ of 10 000 hours or longer at 1 073 K (800 °C) at a stress of 400 MPa; or
A ‘low cycle fatigue life’ of 10 000 cycles or more at 973 K (700 °C) at a maximum stress of 700 MPa;
Titanium alloys having any of the following:
A ‘stress-rupture life’ of 10 000 hours or longer at 723 K (450 °C) at a stress of 200 MPa; or
A ‘low cycle fatigue life’ of 10 000 cycles or more at 723 K (450 °C) at a maximum stress of 400 MPa;
Aluminium alloys having any of the following:
A tensile strength of 240 MPa or more at 473 K (200 °C); or
A tensile strength of 415 MPa or more at 298 K (25 °C);
Magnesium alloys having all of the following:
A tensile strength of 345 MPa or more; and
A corrosion rate of less than 1 mm/year in 3 % sodium chloride aqueous solution measured in accordance with ASTM standard G-31 or national equivalents;
Metal alloy powder or particulate material, having all of the following:
Made from any of the following composition systems:
Technical Note:
X in the following equals one or more alloying elements.
Nickel alloys (Ni-Al-X, Ni-X-Al) qualified for turbine engine parts or components, i.e. with less than 3 non-metallic particles (introduced during the manufacturing process) larger than 100 μm in 109 alloy particles;
Niobium alloys (Nb-Al-X or Nb-X-Al, Nb-Si-X or Nb-X-Si, Nb-Ti-X or Nb-X-Ti);
Titanium alloys (Ti-Al-X or Ti-X-Al);
Aluminium alloys (Al-Mg-X or Al-X-Mg, Al-Zn-X or Al-X-Zn, Al-Fe-X or Al-X-Fe); or
Magnesium alloys (Mg-Al-X or Mg-X-Al);
Made in a controlled environment by any of the following processes:
‘Vacuum atomisation’;
‘Gas atomisation’;
‘Rotary atomisation’;
‘Splat quenching’;
‘Melt spinning’ and ‘comminution’;
‘Melt extraction’ and ‘comminution’;
‘Mechanical alloying’; or
‘Plasma atomisation’;and
Capable of forming materials specified in 1C002.a. or 1C002.b.;
Alloyed materials having all of the following:
Made from any of the composition systems specified in 1C002.c.1.;
In the form of uncomminuted flakes, ribbons or thin rods; and
Produced in a controlled environment by any of the following:
‘Splat quenching’;
‘Melt spinning’; or
‘Melt extraction’.
Technical Notes:
1. ‘Vacuum atomisation’ is a process to reduce a molten stream of metal to droplets of a diameter of 500 μm or less by the rapid evolution of a dissolved gas upon exposure to a vacuum.
2. ‘Gas atomisation’ is a process to reduce a molten stream of metal alloy to droplets of 500 μm diameter or less by a high pressure gas stream.
3. ‘Rotary atomisation’ is a process to reduce a stream or pool of molten metal to droplets to a diameter of 500 μm or less by centrifugal force.
4. ‘Splat quenching’ is a process to ‘solidify rapidly’ a molten metal stream impinging upon a chilled block, forming a flake-like product.
5. ‘Melt spinning’ is a process to ‘solidify rapidly’ a molten metal stream impinging upon a rotating chilled block, forming a flake, ribbon or rod-like product.
6. ‘Comminution’ is a process to reduce a material to particles by crushing or grinding.
7. ‘Melt extraction’ is a process to ‘solidify rapidly’ and extract a ribbon-like alloy product by the insertion of a short segment of a rotating chilled block into a bath of a molten metal alloy.
8. ‘Mechanical alloying’ is an alloying process resulting from the bonding, fracturing and rebonding of elemental and master alloy powders by mechanical impact. Non-metallic particles may be incorporated in the alloy by addition of the appropriate powders.
9. ‘Plasma atomisation’ is a process to reduce a molten stream or solid metal to droplets of 500 μm diameter or less, using plasma torches in an inert gas environment.
10. ‘Solidify rapidly’ is a process involving the solidification of molten material at cooling rates exceeding 1 000 K/sec.
1C003Magnetic metals, of all types and of whatever form, having any of the following:
Initial relative permeability of 120 000 or more and a thickness of 0,05 mm or less;
Technical Note:
Measurement of initial relative permeability must be performed on fully annealed materials.
Magnetostrictive alloys having any of the following:
A saturation magnetostriction of more than 5 × 10–4; or
A magnetomechanical coupling factor (k) of more than 0,8; or
Amorphous or ‘nanocrystalline’ alloy strips, having all of the following:
A composition having a minimum of 75 % by weight of iron, cobalt or nickel;
A saturation magnetic induction (Bs) of 1,6 T or more; and
Any of the following:
A strip thickness of 0,02 mm or less; or
An electrical resistivity of 2 × 10–4 ohm cm or more.
Technical Note:
‘Nanocrystalline’ materials in 1C003.c. are those materials having a crystal grain size of 50 nm or less, as determined by X-ray diffraction.
1C004Uranium titanium alloys or tungsten alloys with a ‘matrix’ based on iron, nickel or copper, having all of the following:
A density exceeding 17,5 g/cm3;
An elastic limit exceeding 880 MPa;
An ultimate tensile strength exceeding 1 270 MPa; and
An elongation exceeding 8 %.
1C005‘Superconductive’‘composite’ conductors in lengths exceeding 100 m or with a mass exceeding 100 g, as follows:
‘Superconductive’‘composite’ conductors containing one or more niobium-titanium ‘filaments’, having all of the following:
Embedded in a ‘matrix’ other than a copper or copper-based mixed ‘matrix’; and
Having a cross-section area less than 0,28 × 10–4 mm2 (6 μm in diameter for circular ‘filaments’);
‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’ other than niobium-titanium, having all of the following:
A ‘critical temperature’ at zero magnetic induction exceeding 9,85 K (– 263,31 °C); and
Remaining in the ‘superconductive’ state at a temperature of 4,2 K (– 268,96 °C) when exposed to a magnetic field oriented in any direction perpendicular to the longitudinal axis of conductor and corresponding to a magnetic induction of 12 T with critical current density exceeding 1 750 A/mm2 on overall cross-section of the conductor;
‘Superconductive’‘composite’ conductors consisting of one or more ‘superconductive’‘filaments’ which remain ‘superconductive’ above 115 K (– 158,16 °C).
Technical Note:
For the purpose of 1C005 ‘filaments’ may be in wire, cylinder, film, tape or ribbon form.
1C006Fluids and lubricating materials, as follows:
Not used;
Lubricating materials containing, as their principal ingredients, any of the following:
Phenylene or alkylphenylene ethers or thio-ethers, or their mixtures, containing more than two ether or thio-ether functions or mixtures thereof; or
Fluorinated silicone fluids with a kinematic viscosity of less than 5 000 mm2/s (5 000 centistokes) measured at 298 K (25 °C);
Damping or flotation fluids having all of the following:
Purity exceeding 99,8 %;
Containing less than 25 particles of 200 μm or larger in size per 100 ml; and
Made from at least 85 % of any of the following:
Dibromotetrafluoroethane (CAS 25497-30-7, 124-73-2, 27336-23-8);
Polychlorotrifluoroethylene (oily and waxy modifications only); or
Polybromotrifluoroethylene;
Fluorocarbon fluids designed for electronic cooling and having all of the following:
Containing 85 % by weight or more of any of the following, or mixtures thereof:
Monomeric forms of perfluoropolyalkylether-triazines or perfluoroaliphatic-ethers;
Perfluoroalkylamines;
Perfluorocycloalkanes; or
Perfluoroalkanes;
Density at 298 K (25 °C) of 1,5 g/ml or more;
In a liquid state at 273 K (0 °C); and
Containing 60 % or more by weight of fluorine.
Note: 1C006.d. does not control materials specified and packaged as medical products.
1C007Ceramic powders, ceramic-‘matrix’‘composite’ materials and ‘precursor materials’, as follows:
NB: SEE ALSO 1C107.
Ceramic powders of titanium diboride (TiB2) (CAS 12045-63-5) having total metallic impurities, excluding intentional additions, of less than 5 000 ppm, an average particle size equal to or less than 5 μm and no more than 10 % of the particles larger than 10 μm;
Not used;
Ceramic-‘matrix’‘composite’ materials as follows:
Ceramic-ceramic ‘composite’ materials with a glass or oxide-‘matrix’ and reinforced with any of the following:
Continuous fibres made from any of the following materials:
Al2O3 (CAS 1344-28-1); or
Si-C-N; or
Note: 1C007.c.1.a. does not control ‘composites’ containing fibres with a tensile strength of less than 700 MPa at 1 273 K (1 000 °C) or tensile creep resistance of more than 1 % creep strain at 100 MPa load and 1 273 K (1 000 °C) for 100 hours.
Fibres being all of the following:
Made from any of the following materials:
Si-N;
Si-C;
Si-Al-O-N; or
Si-O-N; and
Having a ‘specific tensile strength’ exceeding 12,7 × 103m;
Ceramic ‘matrix’‘composite’ materials, with a ‘matrix’ formed of carbides or nitrides of silicon, zirconium or boron;
Not used;
‘Precursor materials’ specially designed for the ‘production’ of materials specified in 1C007.c., as follows:
Polydiorganosilanes;
Polysilazanes;
Polycarbosilazanes;
Technical Note:
For the purposes of 1C007, ‘precursor materials’ are special purpose polymeric or metallo-organic materials used for the ‘production’ of silicon carbide, silicon nitride, or ceramics with silicon, carbon and nitrogen.
Not used.
1C008Non-fluorinated polymeric substances as follows:
Imides, as follows:
Bismaleimides;
Aromatic polyamide-imides (PAI) having a ‘glass transition temperature (Tg)’ exceeding 563 K (290 °C);
Aromatic polyimides having a ‘glass transition temperature (Tg)’ exceeding 505 K (232 °C);
Aromatic polyetherimides having a ‘glass transition temperature (Tg)’ exceeding 563 K (290 °C);
Note: 1C008.a. controls substances in liquid or solid ‘fusible’ form, including resin, powder, pellet, film, sheet, tape or ribbon.
NB: For non-‘fusible’ aromatic polyimides in film, sheet, tape or ribbon form, see 1A003.
Not used;
Not used;
Polyarylene ketones;
Polyarylene sulphides, where the arylene group is biphenylene, triphenylene or combinations thereof;
Polybiphenylenethersulphone having a ‘glass transition temperature (Tg)’ exceeding 563 K (290 °C).
Technical Notes:
1. The ‘glass transition temperature (Tg)’ for 1C008.a.2. thermoplastic materials, 1C008.a.4. materials and 1C008.f. materials is determined using the method described in ISO 11357-2:1999 or national equivalents
2. The ‘glass transition temperature (Tg)’ for 1C008.a.2. thermosetting materials and 1C008.a.3. materials is determined using the 3-point bend method described in ASTM D 7028-07 or equivalent national standard. The test is to be performed using a dry test specimen which has attained a minimum of 90 % degree of cure as specified by ASTM E 2160-04 or equivalent national standard, and was cured using the combination of standard- and post-cure processes that yield the highest Tg.
1C009Unprocessed fluorinated compounds as follows:
Not used;
Fluorinated polyimides containing 10 % by weight or more of combined fluorine;
Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine.
1C010‘Fibrous or filamentary materials’, as follows:
NB: SEE ALSO 1C210 AND 9C110.
Technical Notes:
1. For the purpose of calculating ‘specific tensile strength’, ‘specific modulus’ or specific weight of ‘fibrous or filamentary materials’ in 1C010.a., 1C010.b., 1C010.c. or 1C010.e.1.b., the tensile strength and modulus should be determined by using Method A described in ISO 10618:2004 or national equivalents.
2. Assessing the ‘specific tensile strength’, ‘specific modulus’ or specific weight of non-unidirectional ‘fibrous or filamentary materials’ (e.g., fabrics, random mats or braids) in 1C010 is to be based on the mechanical properties of the constituent unidirectional monofilaments (e.g., monofilaments, yarns, rovings or tows) prior to processing into the non-unidirectional ‘fibrous or filamentary materials’.
Organic ‘fibrous or filamentary materials’, having all of the following:
‘Specific modulus’ exceeding 12,7 × 106 m; and
‘Specific tensile strength’ exceeding 23,5 × 104 m;
Note: 1C010.a. does not control polyethylene.
Carbon ‘fibrous or filamentary materials’, having all of the following:
‘Specific modulus’ exceeding 14,65 × 106 m; and
‘Specific tensile strength’ exceeding 26,82 × 104 m;
Note: 1C010.b. does not control:
‘Fibrous or filamentary materials’, for the repair of ‘civil aircraft’ structures or laminates, having all of the following:
An area not exceeding 1 m2;
A length not exceeding 2,5 m; and
A width exceeding 15 mm.
Mechanically chopped, milled or cut carbon ‘fibrous or filamentary materials’ 25,0 mm or less in length.
Inorganic ‘fibrous or filamentary materials’, having all of the following:
Having any of the following:
Composed of 50 % or more by weight silicon dioxide and having a ‘specific modulus’ exceeding 2,54 × 106 m; or
Not specified in 1C010.c.1.a. and having a ‘specific modulus’ exceeding 5,6 × 106 m; and
Melting, softening, decomposition or sublimation point exceeding 1 922 K (1 649 °C) in an inert environment;
Note: 1C010.c. does not control:
Discontinuous, multiphase, polycrystalline alumina fibres in chopped fibre or random mat form, containing 3 % by weight or more silica, with a ‘specific modulus’ of less than 10 × 106 m;
Molybdenum and molybdenum alloy fibres;
Boron fibres;
Discontinuous ceramic fibres with a melting, softening, decomposition or sublimation point lower than 2 043 K (1 770 °C) in an inert environment.
‘Fibrous or filamentary materials’, having any of the following:
Composed of any of the following:
Polyetherimides specified in 1C008.a.; or
Materials specified in 1C008.d. to 1C008.f.; or
Composed of materials specified in 1C010.d.1.a. or 1C010.d.1.b. and ‘commingled’ with other fibres specified in 1C010.a., 1C010.b. or 1C010.c.;
Technical Note:
‘Commingled’ is filament to filament blending of thermoplastic fibres and reinforcement fibres in order to produce a fibre reinforcement ‘matrix’ mix in total fibre form.
Fully or partially resin-impregnated or pitch-impregnated ‘fibrous or filamentary materials’ (prepregs), metal or carbon-coated ‘fibrous or filamentary materials’ (preforms) or ‘carbon fibre preforms’, having all of the following:
Having any of the following:
Inorganic ‘fibrous or filamentary materials’ specified in 1C010.c.; or
Organic or carbon ‘fibrous or filamentary materials’, having all of the following:
‘Specific modulus’ exceeding 10,15 × 106 m; and
‘Specific tensile strength’ exceeding 17,7 × 104 m; and
Having any of the following:
Resin or pitch, specified in 1C008 or 1C009.b.;
‘Dynamic Mechanical Analysis glass transition temperature (DMA Tg)’ equal to or exceeding 453 K (180 °C) and having a phenolic resin; or
‘Dynamic Mechanical Analysis glass transition temperature (DMA Tg)’ equal to or exceeding 505 K (232 °C) and having a resin or pitch, not specified in 1C008 or 1C009.b., and not being a phenolic resin;
Note 1: Metal or carbon-coated ‘fibrous or filamentary materials’ (preforms) or ‘carbon fibre preforms’, not impregnated with resin or pitch, are specified by ‘fibrous or filamentary materials’ in 1C010.a., 1C010.b. or 1C010.c.
Note 2: 1C010.e. does not control:
Epoxy resin ‘matrix’ impregnated carbon ‘fibrous or filamentary materials’ (prepregs) for the repair of ‘civil aircraft’ structures or laminates, having all the following;
An area not exceeding 1 m2;
A length not exceeding 2,5 m; and
A width exceeding 15 mm.
Fully or partially resin-impregnated or pitch-impregnated mechanically chopped, milled or cut carbon ‘fibrous or filamentary materials’ 25,0 mm or less in length when using a resin or pitch other than those specified in 1C008 or 1C009.b.
Technical Notes:
1. ‘Carbon fibre preforms’ are an ordered arrangement of uncoated or coated fibres intended to constitute a framework of a part before the ‘matrix’ is introduced to form a ‘composite’.
2. The ‘Dynamic Mechanical Analysis glass transition temperature (DMA Tg)’ for materials specified in 1C010.e. is determined using the method described in ASTM D 7028-07, or equivalent national standard, on a dry test specimen. In the case of thermoset materials, degree of cure of a dry test specimen shall be a minimum of 90 % as defined by ASTM E 2160-04 or equivalent national standard.
1C011Metals and compounds, as follows:
NB: SEE ALSO MILITARY GOODS CONTROLS and 1C111.
Metals in particle sizes of less than 60 μm whether spherical, atomised, spheroidal, flaked or ground, manufactured from material consisting of 99 % or more of zirconium, magnesium and alloys thereof;
Technical Note:
The natural content of hafnium in the zirconium (typically 2 % to 7 %) is counted with the zirconium.
Note: The metals or alloys specified in 1C011.a. are controlled whether or not the metals or alloys are encapsulated in aluminium, magnesium, zirconium or beryllium.
Boron or boron alloys, with a particle size of 60 μm or less, as follows:
Boron with a purity of 85 % by weight or more;
Boron alloys with a boron content of 85 % by weight or more;
Note: The metals or alloys specified in 1C011.b. are controlled whether or not the metals or alloys are encapsulated in aluminium, magnesium, zirconium or beryllium.
Guanidine nitrate (CAS 506-93-4);
Nitroguanidine (NQ) (CAS 556-88-7).
NB: See also Military Goods Controls for metal powders mixed with other substances to form a mixture formulated for military purposes.
1C012Materials as follows:
Technical Note:
These materials are typically used for nuclear heat sources.
Plutonium in any form with a plutonium isotopic assay of plutonium-238 of more than 50 % by weight;
Note: 1C012.a. does not control:
Shipments with a plutonium content of 1 g or less;
Shipments of 3 ‘effective grammes’ or less when contained in a sensing component in instruments.
‘Previously separated’ neptunium-237 in any form.
Note: 1C012.b. does not control shipments with a neptunium-237 content of 1 g or less.
1C101Materials and devices for reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures, other than those specified in 1C001, usable in ‘missiles’, ‘missile’ subsystems or unmanned aerial vehicles specified in 9A012 or 9A112.a.
Note 1: 1C101 includes:
Structural materials and coatings specially designed for reduced radar reflectivity;
Coatings, including paints, specially designed for reduced or tailored reflectivity or emissivity in the microwave, infrared or ultraviolet regions of the electromagnetic spectrum.
Note 2: 1C101 does not include coatings when specially used for the thermal control of satellites.
Technical Note:
In 1C101 ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km.
1C102Resaturated pyrolized carbon-carbon materials designed for space launch vehicles specified in 9A004 or sounding rockets specified in 9A104.
1C107Graphite and ceramic materials, other than those specified in 1C007, as follows:
Fine grain graphites with a bulk density of 1,72 g/cm3 or greater, measured at 288 K (15 °C), and having a grain size of 100 μm or less, usable for rocket nozzles and re-entry vehicle nose tips, which can be machined to any of the following products:
Cylinders having a diameter of 120 mm or greater and a length of 50 mm or greater;
Tubes having an inner diameter of 65 mm or greater and a wall thickness of 25 mm or greater and a length of 50 mm or greater; or
Blocks having a size of 120 mm × 120 mm × 50 mm or greater;
NB: See also 0C004.
Pyrolytic or fibrous reinforced graphites, usable for rocket nozzles and reentry vehicle nose tips usable in ‘missiles’, space launch vehicles specified in 9A004 or sounding rockets specified in 9A104;
NB: See also 0C004.
Ceramic composite materials (dielectric constant less than 6 at any frequency from 100 MHz to 100 GHz) for use in radomes usable in ‘missiles’, space launch vehicles specified in 9A004 or sounding rockets specified in 9A104;
Bulk machinable silicon-carbide reinforced unfired ceramic, usable for nose tips usable in ‘missiles’, space launch vehicles specified in 9A004 or sounding rockets specified in 9A104;
Reinforced silicon-carbide ceramic composites, usable for nose tips, reentry vehicles and nozzle flaps usable in ‘missiles’, space launch vehicles specified in 9A004 or sounding rockets specified in 9A104;
Bulk machinable ceramic composite materials consisting of an ‘Ultra High Temperature Ceramic (UHTC)’ matrix with a melting point equal to or greater than 3 000 °C and reinforced with fibres or filaments, usable for missile components (such as nose-tips, re-entry vehicles, leading edges, jet vanes, control surfaces or rocket motor throat inserts) in ‘missiles’, space launch vehicles specified in 9A004, sounding rockets specified in 9A104 or ‘missiles’.
Note: 1C107.f. does not control ‘Ultra High Temperature Ceramic (UHTC) ’ materials in non-composite form.
Technical Note 1:
In 1C107.f. ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km.
Technical Note 2:
‘Ultra High Temperature Ceramics (UHTC)’ includes:
Titanium diboride (TiB2);
Zirconium diboride (ZrB2);
Niobium diboride (NbB2);
Hafnium diboride (HfB2);
Tantalum diboride (TaB2);
Titanium carbide (TiC);
Zirconium carbide (ZrC);
Niobium carbide (NbC);
Hafnium carbide (HfC);
Tantalum carbide (TaC).
1C111Propellants and constituent chemicals for propellants, other than those specified in 1C011, as follows:
Propulsive substances:
Spherical or spheroidal aluminium powder other than that specified in the Military Goods Controls, in particle size of less than 200 μm and an aluminium content of 97 % by weight or more, if at least 10 % of the total weight is made up of particles of less than 63 μm, according to ISO 2591-1:1988 or national equivalents;
Technical Note:
A particle size of 63 μm (ISO R-565) corresponds to 250 mesh (Tyler) or 230 mesh (ASTM standard E-11).
Metal powders, other than that specified in the Military Goods Controls, as follows:
Metal powders of zirconium, beryllium or magnesium, or alloys of these metals, if at least 90 % of the total particles by particle volume or weight are made up of particles of less than 60 μm (determined by measurement techniques such as using a sieve, laser diffraction or optical scanning), whether spherical, atomized, spheroidal, flaked or ground, consisting 97 % by weight or more of any of the following:
Zirconium;
Beryllium; or
Magnesium;
Technical Note:
The natural content of hafnium in the zirconium (typically 2 % to 7 %) is counted with the zirconium.
Metal powders of either boron or boron alloys with a boron content of 85 % or more by weight, if at least 90 % of the total particles by particle volume or weight are made up of particles of less than 60 μm (determined by measurement techniques such as using a sieve, laser diffraction or optical scanning), whether spherical, atomised, spheroidal, flaked or ground;
Note: 1C111a.2.a. and 1C111a.2.b. controls powder mixtures with a multimodal particle distribution (e.g. mixtures of different grain sizes) if one or more modes are controlled.
Oxidiser substances usable in liquid propellant rocket engines as follows:
Dinitrogen trioxide (CAS 10544-73-7);
Nitrogen dioxide (CAS 10102-44-0)/dinitrogen tetroxide (CAS 10544-72-6);
Dinitrogen pentoxide (CAS 10102-03-1);
Mixed Oxides of Nitrogen (MON);
Technical Note:
Mixed Oxides of Nitrogen (MON) are solutions of Nitric Oxide (NO) in Dinitrogen Tetroxide/Nitrogen Dioxide (N2O4/NO2) that can be used in missile systems. There are a range of compositions that can be denoted as MONi or MONij, where i and j are integers representing the percentage of Nitric Oxide in the mixture (e.g., MON3 contains 3 % Nitric Oxide, MON25 25 % Nitric Oxide. An upper limit is MON40, 40 % by weight).
SEE MILITARY GOODS CONTROLS FOR Inhibited Red Fuming Nitric Acid (IRFNA);
SEE MILITARY GOODS CONTROLS AND 1C238 FOR compounds composed of fluorine and one or more of other halogens, oxygen or nitrogen.
Hydrazine derivatives as follows:
NB: SEE ALSO MILITARY GOODS CONTROLS.
Trimethylhydrazine (CAS 1741-01-1);
Tetramethylhydrazine (CAS 6415-12-9);
N,N-Diallylhydrazine (CAS 5164-11-4);
Allylhydrazine (CAS 7422-78-8);
Ethylene dihydrazine (CAS 6068-98-0);
Monomethylhydrazine dinitrate;
Unsymmetrical dimethylhydrazine nitrate;
Hydrazinium azide (CAS 14546-44-2);
1,1-Dimethylhydrazinium azide (CAS 227955-52-4)/1,2-Dimethylhydrazinium azide (CAS 299177-50-7);
Hydrazinium dinitrate (CAS 13464-98-7);
Diimido oxalic acid dihydrazine (CAS 3457-37-2);
2-hydroxyethylhydrazine nitrate (HEHN);
See Military Goods Controls for Hydrazinium perchlorate;
Hydrazinium diperchlorate (CAS 13812-39-0);
Methylhydrazine nitrate (MHN) (CAS 29674-96-2);
1,1-Diethylhydrazine nitrate (DEHN)/1,2-Diethylhydrazine nitrate (DEHN) (CAS 363453-17-2);
3,6-Dihydrazino tetrazine nitrate (1,4-dihydrazine nitrate) (DHTN);
High energy density materials, other than that specified in the Military Goods Controls, usable in ‘missiles’ or unmanned aerial vehicles specified in 9A012 or 9A112.a.;
Mixed fuel that incorporate both solid and liquid fuels, such as boron slurry, having a mass-based energy density of 40 × 106 J/kg or greater;
Other high energy density fuels and fuel additives (e.g., cubane, ionic solutions, JP-10) having a volume-based energy density of 37,5 × 109 J/m3 or greater, measured at 20 °C and one atmosphere (101,325 kPa) pressure;
Note: 1C111.a.5.b. does not control fossil refined fuels and biofuels produced from vegetables, including fuels for engines certified for use in civil aviation, unless specially formulated for ‘missiles’ or unmanned aerial vehicles specified in 9A012 or 9A112.a..
Technical Note:
In 1C111.a.5. ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km.
Hydrazine replacement fuels as follows:
2-Dimethylaminoethylazide (DMAZ) (CAS 86147-04-8);
Polymeric substances:
Carboxy-terminated polybutadiene (including carboxyl-terminated polybutadiene) (CTPB);
Hydroxy-terminated polybutadiene (including hydroxyl-terminated polybutadiene) (HTPB) (CAS 69102-90-5), other than that specified in the Military Goods Controls;
Polybutadiene-acrylic acid (PBAA);
Polybutadiene-acrylic acid-acrylonitrile (PBAN) (CAS 25265-19-4/CAS 68891-50-9);
Polytetrahydrofuran polyethylene glycol (TPEG);
Technical Note:
Polytetrahydrofuran polyethylene glycol (TPEG) is a block co-polymer of poly 1,4-Butanediol (CAS 110-63-4) and polyethylene glycol (PEG) (CAS 25322-68-3).
SEE MILITARY GOODS CONTROLS FOR polyglycidyl nitrate (PGN or poly-GLYN) (CAS 27814-48-8).
Other propellant additives and agents:
SEE MILITARY GOODS CONTROLS FOR Carboranes, decaboranes, pentaboranes and derivatives thereof;
Triethylene glycol dinitrate (TEGDN) (CAS 111-22-8);
2-Nitrodiphenylamine (CAS 119-75-5);
SEE MILITARY GOODS CONTROLS FOR trimethylolethane trinitrate (TMETN) (CAS 3032-55-1);
Diethylene glycol dinitrate (DEGDN) (CAS 693-21-0);
Ferrocene derivatives as follows:
SEE MILITARY GOODS CONTROLS FOR catocene (CAS 37206-42-1);
SEE MILITARY GOODS CONTROLS FOR Ethyl ferrocene (CAS 1273-89-8);
SEE MILITARY GOODS CONTROLS FOR n-Propyl ferrocene (CAS 1273-92-3)/iso-propyl ferrocene (CAS 12126-81-7);
SEE MILITARY GOODS CONTROLS FOR n-butyl ferrocene (CAS 31904-29-7);
SEE MILITARY GOODS CONTROLS FOR Pentyl ferrocene (CAS 1274-00-6);
SEE MILITARY GOODS CONTROLS FOR Dicyclopentyl ferrocene (CAS 125861-17-8);
SEE MILITARY GOODS CONTROLS FOR Dicyclohexyl ferrocene;
SEE MILITARY GOODS CONTROLS FOR Diethyl ferrocene (CAS 1273-97-8);
SEE MILITARY GOODS CONTROLS FOR Dipropyl ferrocene;
SEE MILITARY GOODS CONTROLS FOR Dibutyl ferrocene (CAS 1274-08-4);
SEE MILITARY GOODS CONTROLS FOR Dihexyl ferrocene (CAS 93894-59-8);
SEE MILITARY GOODS CONTROLS FOR Acetyl ferrocene (CAS 1271-55-2)/1,1'-diacetyl ferrocene (CAS 1273-94-5);
SEE MILITARY GOODS CONTROLS FOR Ferrocene carboxylic acid (CAS 1271-42-7)/1,1'-Ferrocenedicarboxylic acid (CAS 1293-87-4);
SEE MILITARY GOODS CONTROLS FOR butacene (CAS 125856-62-4);
Other ferrocene derivatives usable as rocket propellant burning rate modifiers, other than those specified in the Military Goods Controls.
Note: 1C111.c.6.o. does not control ferrocene derivatives that contain a six carbon aromatic functional group attached to the ferrocene molecule.
4,5-Diazidomethyl-2-methyl-1,2,3-triazole (iso-DAMTR), other than that specified in the Military Goods Controls.
‘Gel propellants’, other than that specified in the Military Goods Controls, specifically formulated for use in ‘missiles’.
Technical Notes:
1. In 1C111.d. a ‘gel propellant’ is a fuel or oxidiser formulation using a gellant such as silicates, kaolin (clay), carbon or any polymeric gellant.
2. In 1C111.d. a ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km.
Note: For propellants and constituent chemicals for propellants not specified in 1C111, see the Military Goods Controls.
1C116Maraging steels, useable in ‘missiles’, having all of the following:
NB: SEE ALSO 1C216.
Having an ultimate tensile strength, measured at 293 K (20 °C), equal to or greater than:
0,9 GPa in the solution annealed stage; or
1,5 GPa in the precipitation hardened stage; and
Any of the following forms:
Sheet, plate or tubing with a wall or plate thickness equal to or less than 5,0 mm;
Tubular forms with a wall thickness equal to or less than 50 mm and having an inner diameter equal to or greater than 270 mm.
Technical Note 1:
Maraging steels are iron alloy:
Generally characterised by high nickel, very low carbon content and the use of substitutional elements or precipitates to produce strengthening and age-hardening of the alloy;and
Subjected to heat treatment cycles to facilitate the martensitic transformation process (solution annealed stage) and subsequently age hardened (precipitation hardened stage).
Technical Note 2:
In 1C116 ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km.
1C117Materials for the fabrication of ‘missiles’ components as follows:
Tungsten and alloys in particulate form with a tungsten content of 97 % by weight or more and a particle size of 50 × 10–6 m (50 μm) or less;
Molybdenum and alloys in particulate form with a molybdenum content of 97 % by weight or more and a particle size of 50 × 10–6 m (50 μm) or less;
Tungsten materials in solid form having all of the following:
Any of the following material compositions:
Tungsten and alloys containing 97 % by weight or more of tungsten;
Copper infiltrated tungsten containing 80 % by weight or more of tungsten; or
Silver infiltrated tungsten containing 80 % by weight ot more of tungsten; and
Able to be machined to any of the following products:
Cylinders having a diameter of 120 mm or greater and a length of 50 mm or greater;
Tubes having an inner diameter of 65 mm or greater and a wall thickness of 25 mm or greater and a length of 50 mm or greater; or
Blocks having a size of 120 mm by 120 mm by 50 mm or greater.
Technical Note:
In 1C117 ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km.
1C118Titanium-stabilised duplex stainless steel (Ti-DSS) having all of the following:
Having all of the following characteristics:
Containing 17,0 – 23,0 % by weight of chromium and 4,5 – 7,0 % by weight of nickel;
Having a titanium content of greater than 0,10 % by weight; and
A ferritic-austenitic microstructure (also referred to as a two-phase microstructure) of which at least 10 % by volume (according to ASTM E-1181-87 or national equivalents) is austenite; and
Having any of the following forms:
Ingots or bars having a size of 100 mm or more in each dimension;
Sheets having a width of 600 mm or more and a thickness of 3 mm or less; or
Tubes having an outer diameter of 600 mm or more and a wall thickness of 3 mm or less.
1C202Alloys, other than those specified in 1C002.b.3. or .b.4., as follows:
Aluminium alloys having both of the following characteristics:
‘Capable of’ an ultimate tensile strength of 460 MPa or more at 293 K (20 °C); and
In the form of tubes or cylindrical solid forms (including forgings) with an outside diameter of more than 75 mm;
Titanium alloys having both of the following characteristics:
‘Capable of’ an ultimate tensile strength of 900 MPa or more at 293 K (20 °C); and
In the form of tubes or cylindrical solid forms (including forgings) with an outside diameter of more than 75 mm.
Technical Note:
The phrase alloys ‘capable of’ encompasses alloys before or after heat treatment.
1C210‘Fibrous or filamentary materials’ or prepregs, other than those specified in 1C010.a.,.b. or.e., as follows:
Carbon or aramid ‘fibrous or filamentary materials’ having either of the following characteristics:
A ‘specific modulus’ of 12,7 × 106 m or greater; or
A ‘specific tensile strength’ of 23,5 × 104 m or greater;
Note: 1C210.a. does not control aramid ‘fibrous or filamentary materials’ having 0,25 % by weight or more of an ester based fibre surface modifier;
Glass ‘fibrous or filamentary materials’ having both of the following characteristics:
A ‘specific modulus’ of 3,18 × 106 m or greater; and
A ‘specific tensile strength’ of 7,62 × 104 m or greater;
Thermoset resin impregnated continuous ‘yarns’, ‘rovings’, ‘tows’ or ‘tapes’ with a width of 15 mm or less (prepregs), made from carbon or glass ‘fibrous or filamentary materials’ specified in 1C210.a. or.b.
Technical Note:
The resin forms the matrix of the composite.
Note: In 1C210, ‘fibrous or filamentary materials’ is restricted to continuous ‘monofilaments’, ‘yarns’, ‘rovings’, ‘tows’ or ‘tapes’.
1C216Maraging steel, other than that specified in 1C116, ‘capable of’ an ultimate tensile strength of 1 950 MPa or more, at 293 K (20°C).
Note: 1C216 does not control forms in which all linear dimensions are 75 mm or less.
Technical Note:
The phrase maraging steel ‘capable of’ encompasses maraging steel before or after heat treatment.
1C225Boron enriched in the boron-10 (10B) isotope to greater than its natural isotopic abundance, as follows: elemental boron, compounds, mixtures containing boron, manufactures thereof, waste or scrap of any of the foregoing.
Note: In 1C225 mixtures containing boron include boron loaded materials.
Technical Note:
The natural isotopic abundance of boron-10 is approximately 18,5 weight per cent (20 atom per cent).
1C226Tungsten, tungsten carbide, and alloys containing more than 90 % tungsten by weight, other than that specified in 1C117, having both of the following characteristics:
In forms with a hollow cylindrical symmetry (including cylinder segments) with an inside diameter between 100 mm and 300 mm; and
A mass greater than 20 kg.
Note: 1C226 does not control manufactures specially designed as weights or gamma-ray collimators.
1C227Calcium having both of the following characteristics:
Containing less than 1 000 ppm by weight of metallic impurities other than magnesium; and
Containing less than 10 ppm by weight of boron.
1C228Magnesium having both of the following characteristics:
Containing less than 200 ppm by weight of metallic impurities other than calcium; and
Containing less than 10 ppm by weight of boron.
1C229Bismuth having both of the following characteristics:
A purity of 99,99 % or greater by weight; and
Containing less than 10 ppm by weight of silver.
1C230Beryllium metal, alloys containing more than 50 % beryllium by weight, beryllium compounds, manufactures thereof, and waste or scrap of any of the foregoing, other than that specified in the Military Goods Controls.
NB: SEE ALSO MILITARY GOODS CONTROLS.
Note: 1C230 does not control the following:
Metal windows for X-ray machines, or for bore-hole logging devices;
Oxide shapes in fabricated or semi-fabricated forms specially designed for electronic component parts or as substrates for electronic circuits;
Beryl (silicate of beryllium and aluminium) in the form of emeralds or aquamarines.
1C231Hafnium metal, alloys containing more than 60 % hafnium by weight, hafnium compounds containing more than 60 % hafnium by weight, manufactures thereof, and waste or scrap of any of the foregoing.
1C232Helium-3 (3He), mixtures containing helium-3, and products or devices containing any of the foregoing.
Note: 1C232 does not control a product or device containing less than 1 g of helium-3.
1C233Lithium enriched in the lithium-6 (6Li) isotope to greater than its natural isotopic abundance, and products or devices containing enriched lithium, as follows: elemental lithium, alloys, compounds, mixtures containing lithium, manufactures thereof, waste or scrap of any of the foregoing.
Note: 1C233 does not control thermoluminescent dosimeters.
Technical Note:
The natural isotopic abundance of lithium-6 is approximately 6,5 weight per cent (7,5 atom per cent).
1C234Zirconium with a hafnium content of less than 1 part hafnium to 500 parts zirconium by weight, as follows: metal, alloys containing more than 50 % zirconium by weight, compounds, manufactures thereof, waste or scrap of any of the foregoing, other than those specified in 0A001.f.
Note: 1C234 does not control zirconium in the form of foil having a thickness of 0,10 mm or less.
1C235Tritium, tritium compounds, mixtures containing tritium in which the ratio of tritium to hydrogen atoms exceeds 1 part in 1 000 , and products or devices containing any of the foregoing.
Note: 1C235 does not control a product or device containing less than 1,48 × 103 GBq (40 Ci) of tritium.
1C236‘Radionuclides’ appropriate for making neutron sources based on alpha-n reaction, other than those specified in 0C001 and 1C012.a., in the following forms:
Elemental;
Compounds having a total activity of 37 GBq/kg (1 Ci/kg) or greater;
Mixtures having a total activity of 37 GBq/kg (1 Ci/kg) or greater;
Products or devices containing any of the foregoing.
Note: 1C236 does not control a product or device containing less than 3,7 GBq (100 millicuries) of activity.
Technical Note:
In 1C236 ‘radionuclides’ are any of the following:
1C237Radium-226 (226Ra), radium-226 alloys, radium-226 compounds, mixtures containing radium-226, manufactures thereof, and products or devices containing any of the foregoing.
Note: 1C237 does not control the following:
Medical applicators;
A product or device containing less than 0,37 GBq (10 millicuries) of radium-226.
1C238Chlorine trifluoride (ClF3).
1C239High explosives, other than those specified in the Military Goods Controls, or substances or mixtures containing more than 2 % by weight thereof, with a crystal density greater than 1,8 g/cm3 and having a detonation velocity greater than 8 000 m/s.
1C240Nickel powder and porous nickel metal, other than those specified in 0C005, as follows:
Nickel powder having both of the following characteristics:
A nickel purity content of 99,0 % or greater by weight; and
A mean particle size of less than 10 μm measured by American Society for Testing and Materials (ASTM) B330 standard;
Porous nickel metal produced from materials specified in 1C240.a.
Note: 1C240 does not control the following:
Filamentary nickel powders;
Single porous nickel sheets with an area of 1 000 cm2 per sheet or less.
Technical Note:
1C240.b. refers to porous metal formed by compacting and sintering the materials in 1C240.a. to form a metal material with fine pores interconnected throughout the structure.
1C241Rhenium, and alloys containing 90 % by weight or more rhenium; and alloys of rhenium and tungsten containing 90 % by weight or more of any combination of rhenium and tungsten, other than those specified in 1C226, having both of the following characteristics:
In forms with a hollow cylindrical symmetry (including cylinder segments) with an inside diameter between 100 and 300 mm; and
A mass greater than 20 kg.
1C350Chemicals, which may be used as precursors for toxic chemical agents, as follows, and ‘chemical mixtures’ containing one or more thereof:
NB: SEE ALSO MILITARY GOODS CONTROLS AND 1C450.
Thiodiglycol (CAS 111-48-8);
Phosphorus oxychloride (CAS 10025-87-3);
Dimethyl methylphosphonate (CAS 756-79-6);
SEE MILITARY GOODS CONTROLS for Methyl phosphonyl difluoride (CAS 676-99-3);
Methyl phosphonyl dichloride (CAS 676-97-1);
Dimethyl phosphite (DMP) (CAS 868-85-9);
Phosphorus trichloride (CAS 7719-12-2);
Trimethyl phosphite (TMP) (CAS 121-45-9);
Thionyl chloride (CAS 7719-09-7);
3-Hydroxy-1-methylpiperidine (CAS 3554-74-3);
N,N-Diisopropyl-(beta)-aminoethyl chloride (CAS 96-79-7);
N,N-Diisopropyl-(beta)-aminoethane thiol (CAS 5842-07-9);
3-Quinuclidinol (CAS 1619-34-7);
Potassium fluoride (CAS 7789-23-3);
2-Chloroethanol (CAS 107-07-3);
Dimethylamine (CAS 124-40-3);
Diethyl ethylphosphonate (CAS 78-38-6);
Diethyl N,N-dimethylphosphoramidate (CAS 2404-03-7);
Diethyl phosphite (CAS 762-04-9);
Dimethylamine hydrochloride (CAS 506-59-2);
Ethyl phosphinyl dichloride (CAS 1498-40-4);
Ethyl phosphonyl dichloride (CAS 1066-50-8);
SEE MILITARY GOODS CONTROLS for Ethyl phosphonyl difluoride (CAS 753-98-0);
Hydrogen fluoride (CAS 7664-39-3);
Methyl benzilate (CAS 76-89-1);
Methyl phosphinyl dichloride (CAS 676-83-5);
N,N-Diisopropyl-(beta)-amino ethanol (CAS 96-80-0);
Pinacolyl alcohol (CAS 464-07-3);
SEE MILITARY GOODS CONTROLS for O-Ethyl O-2-diisopropylaminoethyl methylphosphonite (QL) (CAS 57856-11-8);
Triethyl phosphite (CAS 122-52-1);
Arsenic trichloride (CAS 7784-34-1);
Benzilic acid (CAS 76-93-7);
Diethyl methylphosphonite (CAS 15715-41-0);
Dimethyl ethylphosphonate (CAS 6163-75-3);
Ethyl phosphinyl difluoride (CAS 430-78-4);
Methyl phosphinyl difluoride (CAS 753-59-3);
3-Quinuclidone (CAS 3731-38-2);
Phosphorus pentachloride (CAS 10026-13-8);
Pinacolone (CAS 75-97-8);
Potassium cyanide (CAS 151-50-8);
Potassium bifluoride (CAS 7789-29-9);
Ammonium hydrogen fluoride or ammonium bifluoride (CAS 1341-49-7);
Sodium fluoride (CAS 7681-49-4);
Sodium bifluoride (CAS 1333-83-1);
Sodium cyanide (CAS 143-33-9);
Triethanolamine (CAS 102-71-6);
Phosphorus pentasulphide (CAS 1314-80-3);
Di-isopropylamine (CAS 108-18-9);
Diethylaminoethanol (CAS 100-37-8);
Sodium sulphide (CAS 1313-82-2);
Sulphur monochloride (CAS 10025-67-9);
Sulphur dichloride (CAS 10545-99-0);
Triethanolamine hydrochloride (CAS 637-39-8);
N,N-Diisopropyl-(beta)-aminoethyl chloride hydrochloride (CAS 4261-68-1);
Methylphosphonic acid (CAS 993-13-5);
Diethyl methylphosphonate (CAS 683-08-9);
N,N-Dimethylaminophosphoryl dichloride (CAS 677-43-0);
Triisopropyl phosphite (CAS 116-17-6);
Ethyldiethanolamine (CAS 139-87-7);
O,O-Diethyl phosphorothioate (CAS 2465-65-8);
O,O-Diethyl phosphorodithioate (CAS 298-06-6);
Sodium hexafluorosilicate (CAS 16893-85-9);
Methylphosphonothioic dichloride (CAS 676-98-2);
Diethylamine (CAS 109-89-7);
N,N-Diisopropylaminoethanethiol hydrochloride (CAS 41480-75-5);
Methyl dichlorophosphate (CAS 677-24-7);
Ethyl dichlorophosphate (CAS 1498-51-7);
Methyl difluorophosphate (CAS 22382-13-4);
Ethyl difluorophosphate (CAS 460-52-6);
Diethyl chlorophosphite (CAS 589-57-1);
Methyl chlorofluorophosphate (CAS 754-01-8);
Ethyl chlorofluorophosphate (CAS 762-77-6);
N,N-Dimethylformamidine (CAS 44205-42-7);
N,N-Diethylformamidine (CAS 90324-67-7);
N,N-Dipropylformamidine (CAS 48044-20-8);
N,N-Diisopropylformamidine (CAS 857522-08-8);
N,N-Dimethylacetamidine (CAS 2909-14-0);
N,N-Diethylacetamidine (CAS 14277-06-6);
N,N-Dipropylacetamidine (CAS 1339586-99-0);
N,N-Dimethylpropanamidine (CAS 56776-14-8);
N,N-Diethylpropanamidine (CAS 84764-73-8);
N,N-Dipropylpropanamidine (CAS 1341496-89-6);
N,N-Dimethylbutanamidine (CAS 1340437-35-5);
N,N-Diethylbutanamidine (CAS 53510-30-8);
N,N-Dipropylbutanamidine (CAS 1342422-35-8);
N,N-Diisopropylbutanamidine (CAS 1315467-17-4);
N,N-Dimethylisobutanamidine (CAS 321881-25-8);
N,N-Diethylisobutanamidine (CAS 1342789-47-2);
N,N-Dipropylisobutanamidine (CAS 1342700-45-1).
Note 1: For exports to ‘States not Party to the Chemical Weapons Convention’, 1C350 does not control ‘chemical mixtures’ containing one or more of the chemicals specified in entries 1C350.1, .3, .5, .11, .12, .13, .17, .18, .21, .22, .26, .27, .28, .31, .32, .33, .34, .35, .36, .54, .55, .56, .57, .63 and.65 in which no individually specified chemical constitutes more than 10 % by the weight of the mixture.
Note 2: For exports to ‘States Party to the Chemical Weapons Convention’, 1C350 does not control ‘chemical mixtures’ containing one or more of the chemicals specified in entries 1C350.1, .3, .5, .11, .12, .13, .17, .18, .21, .22, .26, .27, .28, .31, .32, .33, .34, .35, .36, .54, .55, .56, .57, .63 and.65 in which no individually specified chemical constitutes more than 30 % by the weight of the mixture.
Note 3: 1C350 does not control ‘chemical mixtures’ containing one or more of the chemicals specified in entries 1C350.2, .6, .7, .8, .9, .10, .14, .15, .16, .19, .20, .24, .25, .30, .37, .38, .39, .40, .41, .42, .43, .44, .45, .46, .47, .48, .49, .50, .51, .52, .53, .58, .59, .60, .61, .62, .64, .66, .67, .68, .69, .70, .71, .72, .73, .74, .75, .76, .77, .78, .79, .80, .81, .82, .83, .84, .85, .86, .87, .88 and .89 in which no individually specified chemical constitutes more than 30 % by the weight of the mixture.
Note 4: 1C350 does not control products identified as consumer goods packaged for retail sale for personal use or packaged for individual use.
1C351Human and animal pathogens and ‘toxins’, as follows:
Viruses, whether natural, enhanced or modified, either in the form of ‘isolated live cultures’ or as material including living material which has been deliberately inoculated or contaminated with such cultures, as follows:
African horse sickness virus;
African swine fever virus;
Andes virus;
Avian influenza virus, which are:
Uncharacterised; or
Defined in Annex I(2) EC Directive 2005/94/EC (OJ. L 10 14.1.2006 p. 16) as having high pathogenicity, as follows:
Type A viruses with an IVPI (intravenous pathogenicity index) in 6 week old chickens of greater than 1,2; or
Type A viruses of the subtypes H5 or H7 with genome sequences codified for multiple basic amino acids at the cleavage site of the haemagglutinin molecule similar to that observed for other HPAI viruses, indicating that the haemagglutinin molecule can be cleaved by a host ubiquitous protease;
Bluetongue virus;
Chapare virus;
Chikungunya virus;
Choclo virus;
Crimean-Congo hemorrhagic fever virus;
Not used;
Dobrava-Belgrade virus;
Eastern equine encephalitis virus;
Ebolavirus: all members of the Ebolavirus genus;
Foot-and-mouth disease virus;
Goatpox virus;
Guanarito virus;
Hantaan virus;
Hendra virus (Equine morbillivirus);
Suid herpesvirus 1 (Pseudorabies virus; Aujeszky’s disease);
Classical swine fever virus (Hog cholera virus);
Japanese encephalitis virus;
Junin virus;
Kyasanur Forest disease virus;
Laguna Negra virus;
Lassa virus;
Louping ill virus;
Lujo virus;
Lumpy skin disease virus;
Lymphocytic choriomeningitis virus;
Machupo virus;
Marburgvirus: all members of the Marburgvirus genus;
Monkeypox virus;
Murray Valley encephalitis virus;
Newcastle disease virus;
Nipah virus;
Omsk hemorrhagic fever virus;
Oropouche virus;
Peste-des-petits-ruminants virus;
Swine vesicular disease virus;
Powassan virus;
Rabies virus and all other members of the Lyssavirus genus;
Rift Valley fever virus;
Rinderpest virus;
Rocio virus;
Sabia virus;
Seoul virus;
Sheeppox virus;
Sin Nombre virus;
St. Louis encephalitis virus;
Porcine Teschovirus;
Tick-borne encephalitis virus (Far Eastern subtype);
Variola virus;
Venezuelan equine encephalitis virus;
Vesicular stomatitis virus;
Western equine encephalitis virus;
Yellow fever virus;
Severe acute respiratory syndrome-related coronavirus (SARS-related coronavirus);
Reconstructed 1918 influenza virus;
Middle East respiratory syndrome-related coronavirus (MERS-related coronavirus);
Not used;
Bacteria, whether natural, enhanced or modified, either in the form of ‘isolated live cultures’ or as material including living material which has been deliberately inoculated or contaminated with such cultures, as follows:
Bacillus anthracis;
Brucella abortus;
Brucella melitensis;
Brucella suis;
Burkholderia mallei (Pseudomonas mallei);
Burkholderia pseudomallei (Pseudomonas pseudomallei);
Chlamydia psittaci (Chlamydophila psittaci);
Clostridium argentinense (formerly known as Clostridium botulinum Type G), botulinum neurotoxin producing strains;
Clostridium baratii, botulinum neurotoxin producing strains;
Clostridium botulinum;
Clostridium butyricum, botulinum neurotoxin producing strains;
Clostridium perfringens epsilon toxin producing types;
Coxiella burnetii;
Francisella tularensis;
Mycoplasma capricolum subspecies capripneumoniae (strain F38);
Mycoplasma mycoides subspecies mycoides SC (small colony);
Rickettsia prowazekii;
Salmonella enterica subspecies enterica serovar Typhi (Salmonella typhi);
Shiga toxin producing Escherichia coli (STEC) of serogroups O26, O45, O103, O104, O111, O121, O145, O157, and other shiga toxin producing serogroups;
Note: Shiga toxin producing Escherichia coli (STEC) includes, inter alia, enterohaemorrhagic E. coli (EHEC), verotoxin producing E. coli (VTEC) or verocytotoxin producing E. coli (VTEC).
Shigella dysenteriae;
Vibrio cholerae;
Yersinia pestis;
‘Toxins’, as follows, and ‘sub-unit of toxins’ thereof:
Botulinum toxins;
Clostridium perfringens alpha, beta 1, beta 2, epsilon and iota toxins;
Conotoxins;
Ricin;
Saxitoxin;
Shiga toxins (shiga-like toxins, verotoxins and verocytotoxins)
Staphylococcus aureus enterotoxins, hemolysin alpha toxin, and toxic shock syndrome toxin (formerly known as Staphylococcus enterotoxin F);
Tetrodotoxin;
Not used;
Microcystins (Cyanginosins);
Aflatoxins;
Abrin;
Cholera toxin;
Diacetoxyscirpenol;
T-2 toxin;
HT-2 toxin;
Modeccin;
Volkensin;
Viscumin (Viscum Album Lectin 1);
Note: 1C351.d. does not control botulinum toxins or conotoxins in product form meeting all of the following criteria:
Are pharmaceutical formulations designed for human administration in the treatment of medical conditions;
Are pre-packaged for distribution as medical products;
Are authorised by a state authority to be marketed as medical products.
Fungi, whether natural, enhanced or modified, either in the form of ‘isolated live cultures’ or as material including living material which has been deliberately inoculated or contaminated with such cultures, as follows:
Coccidioides immitis;
Coccidioides posadasii.
Note: 1C351 does not control ‘vaccines’ or ‘immunotoxins’.
1C353‘Genetic elements’ and ‘genetically-modified organisms’, as follows:
Any ‘genetically-modified organism’ which contains, or ‘genetic element’ that codes for, any of the following:
Any gene or genes specific to any virus specified in 1C351.a. or 1C354.a.;
Any gene or genes specific to any bacterium specified in 1C351.c. or 1C354.b. or fungus specified in 1C351.e. or 1C354.c., and which is any of the following:
In itself or through its transcribed or translated products represents a significant hazard to human, animal or plant health; or
Could ‘endow or enhance pathogenicity’; or
Any ‘toxins’ specified in 1C351.d. or ‘sub-units of toxins’ therefor;
Not used.
Technical Notes:
1. ‘Genetically-modified organisms’ include organisms in which the nucleic acid sequences have been created or altered by deliberate molecular manipulation.
2. ‘Genetic elements’ include, inter alia, chromosomes, genomes, plasmids, transposons, vectors and inactivated organisms containing recoverable nucleic acid fragments, whether genetically modified or unmodified, or chemically synthesized in whole or in part. For the purposes of the genetic elements control, nucleic acids from an inactivated organism, virus, or sample are considered recoverable if the inactivation and preparation of the material is intended or known to facilitate isolation, purification, amplification, detection, or identification of nucleic acids.
3. ‘Endow or enhance pathogenicity’ is defined as when the insertion or integration of the nucleic acid sequence or sequences is/are likely to enable or increase a recipient organism’sability to be used to deliberately cause disease or death. This might include alterations to, inter alia: virulence, transmissibility, stability, route of infection, host range, reproducibility, ability to evade or suppress host immunity, resistance to medical countermeasures, or detectability.
Note 1: 1C353 does not control nucleic acid sequences of shiga toxin producing Escherichia coli of serogroups O26, O45, O103, O104, O111, O121, O145, O157, and other shiga toxin producing serogroups, other than those genetic elements coding for shiga toxin, or for its subunits.
Note 2: 1C353 does not control ‘vaccines’.
1C354Plant pathogens, as follows:
Viruses, whether natural, enhanced or modified, either in the form of ‘isolated live cultures’ or as material including living material which has been deliberately inoculated or contaminated with such cultures, as follows:
Andean potato latent virus (Potato Andean latent tymovirus);
Potato spindle tuber viroid;
Bacteria, whether natural, enhanced or modified, either in the form of ‘isolated live cultures’ or as material which has been deliberately inoculated or contaminated with such cultures, as follows:
Xanthomonas albilineans;
Xanthomonas axonopodis pv. citri (Xanthomonas campestris pv. citri A) [Xanthomonas campestris pv. citri];
Xanthomonas oryzae pv. oryzae (Pseudomonas campestris pv. oryzae);
Clavibacter michiganensis subsp. sepedonicus (Corynebacterium michiganensis subsp. sepedonicum or Corynebacterium sepedonicum);
Ralstonia solanacearum, race 3, biovar 2;
Fungi, whether natural, enhanced or modified, either in the form of ‘isolated live cultures’ or as material which has been deliberately inoculated or contaminated with such cultures, as follows:
Colletotrichum kahawae (Colletotrichum coffeanum var. virulans);
Cochliobolus miyabeanus (Helminthosporium oryzae);
Microcyclus ulei (syn. Dothidella ulei);
Puccinia graminis ssp. graminis var. graminis/Puccinia graminis ssp. graminis var. stakmanii (Puccinia graminis [syn. Puccinia graminis f. sp. tritici]);
Puccinia striiformis (syn. Puccinia glumarum);
Magnaporthe oryzae (Pyricularia oryzae);
Peronosclerospora philippinensis (Peronosclerospora sacchari);
Sclerophthora rayssiae var. zeae;
Synchytrium endobioticium;
Tilletia indica;
Thecaphora solani.
1C450Toxic chemicals and toxic chemical precursors, as follows, and ‘chemical mixtures’ containing one or more thereof:
NB: SEE ALSO ENTRY 1C350, 1C351.d. AND MILITARY GOODS CONTROLS.
Toxic chemicals, as follows:
Amiton: O,O-Diethyl S-[2-(diethylamino)ethyl] phosphorothiolate (CAS 78-53-5) and corresponding alkylated or protonated salts;
PFIB: 1,1,3,3,3-Pentafluoro-2-(trifluoromethyl)-1-propene (CAS 382-21-8);
SEE MILITARY GOODS CONTROLS FOR BZ: 3-Quinuclidinyl benzilate (CAS 6581-06-2);
Phosgene: Carbonyl dichloride (CAS 75-44-5);
Cyanogen chloride (CAS 506-77-4);
Hydrogen cyanide (CAS 74-90-8);
Chloropicrin: Trichloronitromethane (CAS 76-06-2);
Note 1: For exports to ‘States not Party to the Chemical Weapons Convention’, 1C450 does not control ‘chemical mixtures’ containing one or more of the chemicals specified in entries 1C450.a.1. and.a.2. in which no individually specified chemical constitutes more than 1 % by the weight of the mixture.
Note 2: For exports to ‘States Party to the Chemical Weapons Convention’, 1C450 does not control ‘chemical mixtures’ containing one or more of the chemicals specified in entries 1C450.a.1. and.a.2. in which no individually specified chemical constitutes more than 30 % by the weight of the mixture.
Note 3: 1C450 does not control ‘chemical mixtures’ containing one or more of the chemicals specified in entries 1C450.a.4.,.a.5.,.a.6. and.a.7. in which no individually specified chemical constitutes more than 30 % by the weight of the mixture.
Note 4: 1C450 does not control products identified as consumer goods packaged for retail sale for personal use or packaged for individual use.
Toxic chemical precursors, as follows:
Chemicals, other than those specified in the Military Goods Controls or in 1C350, containing a phosphorus atom to which is bonded one methyl, ethyl or propyl (normal or iso) group but not further carbon atoms;
Note: 1C450.b.1. does not control Fonofos: O-Ethyl S-phenyl ethylphosphonothiolothionate (CAS 944-22-9);
N,N-Dialkyl [methyl, ethyl or propyl (normal or iso)] phosphoramidic dihalides, other than N,N-Dimethylaminophosphoryl dichloride;
NB: See 1C350.57. for N,N-Dimethylaminophosphoryl dichloride.
Dialkyl [methyl, ethyl or propyl (normal or iso)] N,N-dialkyl [methyl, ethyl or propyl (normal or iso)]-phosphoramidates, other than Diethyl-N,N-dimethylphosphoramidate which is specified in 1C350;
N,N-Dialkyl [methyl, ethyl or propyl (normal or iso)] aminoethyl-2-chlorides and corresponding protonated salts, other than N,N-Diisopropyl-(beta)-aminoethyl chloride or N,N-Diisopropyl-(beta)-aminoethyl chloride hydrochloride which are specified in 1C350;
N,N-Dialkyl [methyl, ethyl or propyl (normal or iso)] aminoethane-2-ols and corresponding protonated salts, other than N,N-Diisopropyl-(beta)-aminoethanol (CAS 96-80-0) and N,N-Diethylaminoethanol (CAS 100-37-8) which are specified in 1C350;
Note: 1C450.b.5. does not control the following:
N,N-Dimethylaminoethanol (CAS 108-01-0) and corresponding protonated salts;
Protonated salts of N,N-Diethylaminoethanol (CAS 100-37-8);
N,N-Dialkyl [methyl, ethyl or propyl (normal or iso)] aminoethane-2-thiols and corresponding protonated salts, other than N,N-Diisopropyl-(beta)-aminoethane thiol (CAS 5842-07-9) and N,N-Diisopropylaminoethanethiol hydrochloride (CAS 41480-75-5) which are specified in 1C350;
See 1C350 for ethyldiethanolamine (CAS 139-87-7);
Methyldiethanolamine (CAS 105-59-9).
Note 1: For exports to ‘States not Party to the Chemical Weapons Convention’, 1C450 does not control ‘chemical mixtures’ containing one or more of the chemicals specified in entries 1C450.b.1.,.b.2.,.b.3.,.b.4.,.b.5. and.b.6. in which no individually specified chemical constitutes more than 10 % by the weight of the mixture.
Note 2: For exports to ‘States Party to the Chemical Weapons Convention’, 1C450 does not control ‘chemical mixtures’ containing one or more of the chemicals specified in entries 1C450.b.1.,.b.2.,.b.3.,.b.4.,.b.5. and.b.6. in which no individually specified chemical constitutes more than 30 % by the weight of the mixture.
Note 3: 1C450 does not control ‘chemical mixtures’ containing one or more of the chemicals specified in entry 1C450.b.8. in which no individually specified chemical constitutes more than 30 % by the weight of the mixture.
Note 4: 1C450 does not control products identified as consumer goods packaged for retail sale for personal use or packaged for individual use.
1DSoftware
1D001‘Software’ specially designed or modified for the ‘development’, ‘production’ or ‘use’ of equipment specified in 1B001 to 1B003.
1D002‘Software’ for the ‘development’ of organic ‘matrix’, metal ‘matrix’ or carbon ‘matrix’ laminates or ‘composites’.
1D003‘Software’ specially designed or modified to enable equipment to perform the functions of equipment specified in 1A004.c. or 1A004.d.
1D101‘Software’ specially designed or modified for the operation or maintenance of goods specified in 1B101, 1B102, 1B115, 1B117, 1B118 or 1B119.
1D103‘Software’ specially designed for analysis of reduced observables such as radar reflectivity, ultraviolet/infrared signatures and acoustic signatures.
1D201‘Software’ specially designed for the ‘use’ of goods specified in 1B201.
1ETechnology
1E001‘Technology’ according to the General Technology Note for the ‘development’ or ‘production’ of equipment or materials specified in 1A002 to 1A005, 1A006.b., 1A007, 1B or 1C.
1E002Other ‘technology’ as follows:
‘Technology’ for the ‘development’ or ‘production’ of polybenzothiazoles or polybenzoxazoles;
‘Technology’ for the ‘development’ or ‘production’ of fluoroelastomer compounds containing at least one vinylether monomer;
‘Technology’ for the design or ‘production’ of the following ceramic powders or non-‘composite’ ceramic materials:
Ceramic powders having all of the following:
Any of the following compositions:
Single or complex oxides of zirconium and complex oxides of silicon or aluminium;
Single nitrides of boron (cubic crystalline forms);
Single or complex carbides of silicon or boron; or
Single or complex nitrides of silicon;
Any of the following total metallic impurities (excluding intentional additions):
Less than 1 000 ppm for single oxides or carbides; or
Less than 5 000 ppm for complex compounds or single nitrides; and
Being any of the following:
Zirconia (CAS 1314-23-4) with an average particle size equal to or less than 1 μm and no more than 10 % of the particles larger than 5 μm; or
Other ceramic powders with an average particle size equal to or less than 5 μm and no more than 10 % of the particles larger than 10 μm;
Non-‘composite’ ceramic materials composed of the materials specified in 1E002.c.1.;
Note: 1E002.c.2. does not control ‘technology’ for abrasives.
Not used;
‘Technology’ for the installation, maintenance or repair of materials specified in 1C001;
‘Technology’ for the repair of ‘composite’ structures, laminates or materials specified in 1A002 or 1C007.c.;
Note: 1E002.f. does not control ‘technology’ for the repair of ‘civil aircraft’ structures using carbon ‘fibrous or filamentary materials’ and epoxy resins, contained in ‘aircraft’ manufacturers’ manuals.
‘Libraries’ specially designed or modified to enable equipment to perform the functions of equipment specified in 1A004.c. or 1A004.d.
1E101‘Technology’ according to the General Technology Note for the ‘use’ of goods specified in 1A102, 1B001, 1B101, 1B102, 1B115 to 1B119, 1C001, 1C101, 1C107, 1C111 to 1C118, 1D101 or 1D103.
1E102‘Technology’ according to the General Technology Note for the ‘development’ of ‘software’ specified in 1D001, 1D101 or 1D103.
1E103‘Technology’ for the regulation of temperature, pressure or atmosphere in autoclaves or hydroclaves, when used for the ‘production’ of ‘composites’ or partially processed ‘composites’.
1E104‘Technology’ for the ‘production’ of pyrolytically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose in the 1 573 K (1 300 °C) to 3 173 K (2 900 °C) temperature range at pressures of 130 Pa to 20 kPa.
Note: 1E104 includes ‘technology’ for the composition of precursor gases, flow-rates and process control schedules and parameters.
1E201‘Technology’ according to the General Technology Note for the ‘use’ of goods specified in 1A002, 1A007, 1A202, 1A225 to 1A227, 1B201, 1B225 to 1B234, 1C002.b.3. or.b.4., 1C010.b., 1C202, 1C210, 1C216, 1C225 to 1C241 or 1D201.
1E202‘Technology’ according to the General Technology Note for the ‘development’ or ‘production’ of goods specified in 1A007, 1A202 or 1A225 to 1A227.
1E203‘Technology’ according to the General Technology Note for the ‘development’ of ‘software’ specified in 1D201.
CATEGORY 2 – MATERIALS PROCESSING
2ASystems, Equipment and Components
NB: For quiet running bearings, see the Military Goods Controls.
2A001Anti-friction bearings, bearing systems and components, as follows:
NB: SEE ALSO 2A101.
Ball bearings and solid roller bearings, having all tolerances specified by the manufacturer in accordance with ISO 492 Tolerance Class 4 or Class 2 (or national equivalents), or better, and having both ‘rings’ and ‘rolling elements’, made from monel or beryllium;
Note: 2A001.a. does not control tapered roller bearings.
Technical Notes:
1. ‘Ring’ – annular part of a radial rolling bearing incorporating one or more raceways (ISO 5593:1997).
2. ‘Rolling element’ – ball or roller which rolls between raceways (ISO 5593:1997).
Not used;
Active magnetic bearing systems using any of the following, and specially designed components therefor:
Materials with flux densities of 2,0 T or greater and yield strengths greater than 414 MPa;
All-electromagnetic 3D homopolar bias designs for actuators; or
High temperature (450 K (177 °C) and above) position sensors.
2A101Radial ball bearings, other than those specified in 2A001, having all tolerances specified in accordance with ISO 492 Tolerance Class 2 (or ANSI/ABMA Std 20 Tolerance Class ABEC-9 or other national equivalents), or better and having all of the following characteristics:
An inner ring bore diameter between 12 mm and 50 mm;
An outer ring outside diameter between 25 mm and 100 mm; and
A width between 10 mm and 20 mm.
2A225Crucibles made of materials resistant to liquid actinide metals, as follows:
Crucibles having both of the following characteristics:
A volume of between 150 cm3 and 8 000 cm3; and
Made of or coated with any of the following materials, or combination of the following materials, having an overall impurity level of 2 % or less by weight:
Calcium fluoride (CaF2);
Calcium zirconate (metazirconate) (CaZrO3);
Cerium sulphide (Ce2S3);
Erbium oxide (erbia) (Er2O3);
Hafnium oxide (hafnia) (HfO2);
Magnesium oxide (MgO);
Nitrided niobium-titanium-tungsten alloy (approximately 50 % Nb, 30 % Ti, 20 % W);
Yttrium oxide (yttria) (Y2O3); or
Zirconium oxide (zirconia) (ZrO2);
Crucibles having both of the following characteristics:
A volume of between 50 cm3 and 2 000 cm3; and
Made of or lined with tantalum, having a purity of 99,9 % or greater by weight;
Crucibles having all of the following characteristics:
A volume of between 50 cm3 and 2 000 cm3;
Made of or lined with tantalum, having a purity of 98 % or greater by weight; and
Coated with tantalum carbide, nitride, boride, or any combination thereof.
2A226Valves having all of the following characteristics:
A ‘nominal size’ of 5 mm or greater;
Having a bellows seal; and
Wholly made of or lined with aluminium, aluminium alloy, nickel, or nickel alloy containing more than 60 % nickel by weight.
Technical Note:
For valves with different inlet and outlet diameters, the ‘nominal size’ in 2A226 refers to the smallest diameter.
2BTest, Inspection and Production Equipment
Technical Notes:
1. Secondary parallel contouring axes, (e.g., the w-axis on horizontal boring mills or a secondary rotary axis the centre line of which is parallel to the primary rotary axis) are not counted in the total number of contouring axes. Rotary axes need not rotate over 360o. A rotary axis can be driven by a linear device (e.g., a screw or a rack-and-pinion).
2. For the purposes of 2B, the number of axes which can be coordinated simultaneously for ‘contouring control’ is the number of axes along or around which, during processing of the workpiece, simultaneous and interrelated motions are performed between the workpiece and a tool. This does not include any additional axes along or around which other relative movement within the machine are performed such as:
Wheel-dressing systems in grinding machines;
Parallel rotary axes designed for mounting of separate workpieces;
Co-linear rotary axes designed for manipulating the same workpiece by holding it in a chuck from different ends.
3. Axis nomenclature shall be in accordance with International Standard ISO 841:2001, Industrial automation systems and integration – Numerical control of machines – Coordinate system and motion nomenclature.
4. For the purposes of 2B001 to 2B009 a ‘tilting spindle’ is counted as a rotary axis.
5. ‘Stated “unidirectional positioning repeatability” ’ may be used for each machine tool model as an alternative to individual machine tests and is determined as follows:
Select five machines of a model to be evaluated;
Measure the linear axis repeatability (R↑,R↓) according to ISO 230-2:2014 and evaluate ‘unidirectional positioning repeatability’ for each axis of each of the five machines;
Determine the arithmetic mean value of the ‘unidirectional positioning repeatability’-values for each axis of all five machines together. These arithmetic mean values of ‘unidirectional positioning repeatability’ (
) become the stated value of each axis for the model (
,
…);
Since the Category 2 list refers to each linear axis there will be as many ‘stated ‘unidirectional positioning repeatability’ values as there are linear axes;
If any axis of a machine model not specified in 2B001.a. to 2B001.c. has a ‘stated ‘unidirectional positioning repeatability’ equal to or less than the specified ‘unidirectional positioning repeatability’ of each machine tool model plus 0,7 μm, the builder should be required to reaffirm the accuracy level once every eighteen months.
6. For the purposes of 2B001.a. to 2B001.c., measurement uncertainty for the ‘unidirectional positioning repeatability’ of machine tools, as defined in the International Standard ISO 230-2:2014 or national equivalents, shall not be considered.
7. For the purpose of 2B001.a. to 2B001.c., the measurement of axes shall be made according to test procedures in 5.3.2. of ISO 230-2:2014. Tests for axes longer than 2 meters shall be made over 2 m segments. Axes longer than 4 m require multiple tests (e.g., two tests for axes longer than 4 m and up to 8 m, three tests for axes longer than 8 m and up to 12 m), each over 2 m segments and distributed in equal intervals over the axis length. Test segments are equally spaced along the full axis length, with any excess length equally divided at the beginning, in between, and at the end of the test segments. The smallest ‘unidirectional positioning repeatability’-value of all test segments is to be reported.
2B001Machine tools and any combination thereof, for removing (or cutting) metals, ceramics or ‘composites’, which, according to the manufacturer’s technical specification, can be equipped with electronic devices for ‘numerical control’, as follows:
NB: SEE ALSO 2B201.
Note 1: 2B001 does not control special purpose machine tools limited to the manufacture of gears. For such machines see 2B003.
Note 2: 2B001 does not control special purpose machine tools limited to the manufacture of any of the following:
Crankshafts or camshafts;
Tools or cutters;
Extruder worms;
Engraved or facetted jewellery parts; or
Dental prostheses.
Note 3: A machine tool having at least two of the three turning, milling or grinding capabilities (e.g., a turning machine with milling capability), must be evaluated against each applicable entry 2B001.a., b. or c.
Note 4: A machine tool having an additive manufacturing capability in addition to a turning, milling or grinding capability must be evaluated against each applicable entry 2B001.a.,.b. or.c.
NB: For optical finishing machines, see 2B002.
Machine tools for turning having two or more axes which can be coordinated simultaneously for ‘contouring control’ having any of the following:
‘Unidirectional positioning repeatability’ equal to or less (better) than 0,9 μm along one or more linear axis with a travel length less than 1,0 m; or
‘Unidirectional positioning repeatability’ equal to or less (better) than 1,1 μm along one or more linear axis with a travel length equal to or greater than 1,0 m;
Note 1: 2B001.a. does not control turning machines specially designed for producing contact lenses, having all of the following:
Machine controller limited to using ophthalmic based software for part programming data input; and
No vacuum chucking.
Note 2: 2B001.a. does not control bar machines (Swissturn), limited to machining only bar feed thru, if maximum bar diameter is equal to or less than 42 mm and there is no capability of mounting chucks. Machines may have drilling or milling capabilities for machining parts with diameters less than 42 mm.
Machine tools for milling having any of the following:
Three linear axes plus one rotary axis which can be coordinated simultaneously for ‘contouring control’ having any of the following:
‘Unidirectional positioning repeatability’ equal to or less (better) than 0,9 μm along one or more linear axis with a travel length less than 1,0 m; or
‘Unidirectional positioning repeatability’ equal to or less (better) than 1,1 μm along one or more linear axis with a travel length equal to or greater than 1,0 m;
Five or more axes which can be coordinated simultaneously for ‘contouring control’ having any of the following;
‘Unidirectional positioning repeatability’ equal to or less (better) than 0,9 μm along one or more linear axis with a travel length less than 1,0 m;
‘Unidirectional positioning repeatability’ equal to or less (better) than 1,4 μm along one or more linear axis with a travel length equal to or greater than 1 m and less than 4 m; or
‘Unidirectional positioning repeatability’ equal to or less (better) than 6,0 μm (along one or more linear axis with a travel length equal to or greater than 4 m;
A ‘unidirectional positioning repeatability’ for jig boring machines, equal to or less (better) than 1,1 μm along one or more linear axis; or
Fly cutting machines having all of the following:
Spindle ‘run-out’ and ‘camming’ less (better) than 0,0004 mm TIR; and
Angular deviation of slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR over 300 mm of travel;
Machine tools for grinding having any of the following:
Having all of the following:
‘Unidirectional positioning repeatability’ equal to or less (better) than 1,1 μm along one or more linear axis; and
Three or four axes which can be coordinated simultaneously for ‘contouring control’; or
Five or more axes which can be coordinated simultaneously for ‘contouring control’ having any of the following:
‘Unidirectional positioning repeatability’ equal to or less (better) than 1,1 μm along one or more linear axis with a travel length less than 1 m;
‘Unidirectional positioning repeatability’ equal to or less (better) than 1,4 μm along one or more linear axis with a travel length equal to or greater than 1 m and less than 4 m; or
‘Unidirectional positioning repeatability’ equal to or less (better) than 6,0 μm along one or more linear axis with a travel length equal to or greater than 4 m.
Note: 2B001.c. does not control grinding machine as follows:
Cylindrical external, internal, and external-internal grinding machines, having all of the following:
Limited to cylindrical grinding; and
Limited to a maximum workpiece capacity of 150 mm outside diameter or length.
Machines designed specifically as jig grinders that do not have a z-axis or a w-axis, with a ‘unidirectional positioning repeatability’ less (better) than 1,1 μm
Surface grinders.
Electrical discharge machines (EDM) of the non-wire type which have two or more rotary axes which can be coordinated simultaneously for ‘contouring control’;
Machine tools for removing metals, ceramics or ‘composites’, having all of the following:
Removing material by means of any of the following:
Water or other liquid jets, including those employing abrasive additives;
Electron beam; or
‘Laser’ beam; and
At least two rotary axes having all of the following:
Can be coordinated simultaneously for ‘contouring control’; and
A positioning ‘accuracy’ of less (better) than 0,003°;
Deep-hole-drilling machines and turning machines modified for deep-hole-drilling, having a maximum depth-of-bore capability exceeding 5 m.
2B002Numerically controlled optical finishing machine tools equipped for selective material removal to produce non-spherical optical surfaces having all of the following characteristics:
Finishing the form to less (better) than 1,0 μm;
Finishing to a roughness less (better) than 100 nm rms.
Four or more axes which can be coordinated simultaneously for ‘contouring control’; and
Using any of the following processes:
Magnetorheological finishing (‘MRF’);
Electrorheological finishing (‘ERF’);
‘Energetic particle beam finishing’;
‘Inflatable membrane tool finishing’; or
‘Fluid jet finishing’.
Technical Notes:
For the purposes of 2B002:
1. ‘MRF’ is a material removal process using an abrasive magnetic fluid whose viscosity is controlled by a magnetic field.
2. ‘ERF’ is a removal process using an abrasive fluid whose viscosity is controlled by an electric field.
3. ‘Energetic particle beam finishing’ uses Reactive Atom Plasmas (RAP) or ion-beams to selectively remove material.
4. ‘Inflatable membrane tool finishing’ is a process that uses a pressurized membrane that deforms to contact the workpiece over a small area.
5. ‘Fluid jet finishing’ makes use of a fluid stream for material removal.
2B003‘Numerically controlled’ machine tools, specially designed for the shaving, finishing, grinding or honing of hardened (Rc = 40 or more) spur, helical and double-helical gears having all of the following:
A pitch diameter exceeding 1 250 mm;
A face width of 15 % of pitch diameter or larger; and
A finished quality of AGMA 14 or better (equivalent to ISO 1328 class 3).
2B004Hot ‘isostatic presses’ having all of the following, and specially designed components and accessories therefor:
NB: SEE ALSO 2B104 and 2B204.
A controlled thermal environment within the closed cavity and a chamber cavity with an inside diameter of 406 mm or more; and
Having any of the following:
A maximum working pressure exceeding 207 MPa;
A controlled thermal environment exceeding 1 773 K (1 500 °C); or
A facility for hydrocarbon impregnation and removal of resultant gaseous degradation products.
Technical Note:
The inside chamber dimension is that of the chamber in which both the working temperature and the working pressure are achieved and does not include fixtures. That dimension will be the smaller of either the inside diameter of the pressure chamber or the inside diameter of the insulated furnace chamber, depending on which of the two chambers is located inside the other.
NB: For specially designed dies, moulds and tooling see 1B003, 9B009 and the Military Goods Controls.
2B005Equipment specially designed for the deposition, processing and in-process control of inorganic overlays, coatings and surface modifications, as follows, for substrates specified in column 2, by processes shown in column 1 in the Table following 2E003.f., and specially designed automated handling, positioning, manipulation and control components therefor:
Chemical vapour deposition (CVD) production equipment having all of the following:
NB: SEE ALSO 2B105.
A process modified for one of the following:
Pulsating CVD;
Controlled nucleation thermal deposition (CNTD); or
Plasma enhanced or plasma assisted CVD; and
Having any of the following:
Incorporating high vacuum (equal to or less than 0,01 Pa) rotating seals; or
Incorporating in situ coating thickness control;
Ion implantation production equipment having beam currents of 5 mA or more;
Electron beam physical vapour deposition (EB-PVD) production equipment incorporating power systems rated for over 80 kW and having any of the following:
A liquid pool level ‘laser’ control system w