Choose the experimental features you want to try

This document is an excerpt from the EUR-Lex website

Document 02002L0095-20100925

    Consolidated text: Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

    ELI: http://data.europa.eu/eli/dir/2002/95/2010-09-25

    2002L0095 — EN — 25.09.2010 — 008.001


    This document is meant purely as a documentation tool and the institutions do not assume any liability for its contents

    ►B

    DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

    of 27 January 2003

    on the restriction of the use of certain hazardous substances in electrical and electronic equipment

    (OJ L 037, 13.2.2003, p.19)

    Amended by:

     

     

    Official Journal

      No

    page

    date

     M1

    COMMISSION DECISION of 18 August 2005

      L 214

    65

    19.8.2005

     M2

    COMMISSION DECISION of 13 October 2005

      L 271

    48

    15.10.2005

     M3

    COMMISSION DECISION of 21 October 2005

      L 280

    18

    25.10.2005

     M4

    COMMISSION DECISION of 21 April 2006

      L 115

    38

    28.4.2006

     M5

    COMMISSION DECISION of 12 October 2006

      L 283

    47

    14.10.2006

     M6

    COMMISSION DECISION of 12 October 2006

      L 283

    48

    14.10.2006

     M7

    COMMISSION DECISION of 12 October 2006

      L 283

    50

    14.10.2006

    ►M8

    DIRECTIVE 2008/35/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 11 March 2008

      L 81

    67

    20.3.2008

     M9

    COMMISSION DECISION of 24 January 2008

      L 136

    9

    24.5.2008

     M10

    COMMISSION DECISION of 4 June 2009

      L 139

    32

    5.6.2009

     M11

    COMMISSION DECISION of 10 June 2009

      L 148

    27

    11.6.2009

     M12

    COMMISSION DECISION of 25 February 2010

      L 49

    32

    26.2.2010

    ►M13

    COMMISSION DECISION of 24 September 2010

      L 251

    28

    25.9.2010


    Corrected by:

    ►C1

    Corrigendum, OJ L 254, 29.9.2010, p. 48  (571/10)




    ▼B

    DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

    of 27 January 2003

    on the restriction of the use of certain hazardous substances in electrical and electronic equipment



    THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,

    Having regard to the Treaty establishing the European Community, and in particular Article 95 thereof,

    Having regard to the proposal from the Commission ( 1 ),

    Having regard to the opinion of the Economic and Social Committee ( 2 ),

    Having regard to the opinion of the Committee of Regions ( 3 ),

    Acting in accordance with the procedure laid down in Article 251 of the Treaty in the light of the joint text approved by the Conciliation Committee on 8 November 2002 ( 4 ),

    Whereas:

    (1)

    The disparities between the laws or administrative measures adopted by the Member States as regards the restriction of the use of hazardous substances in electrical and electronic equipment could create barriers to trade and distort competition in the Community and may thereby have a direct impact on the establishment and functioning of the internal market. It therefore appears necessary to approximate the laws of the Member States in this field and to contribute to the protection of human health and the environmentally sound recovery and disposal of waste electrical and electronic equipment.

    (2)

    The European Council at its meeting in Nice on 7, 8 and 9 December 2000 endorsed the Council Resolution of 4 December 2000 on the precautionary principle.

    (3)

    The Commission Communication of 30 July 1996 on the review of the Community strategy for waste management stresses the need to reduce the content of hazardous substances in waste and points out the potential benefits of Community-wide rules limiting the presence of such substances in products and in production processes.

    (4)

    The Council Resolution of 25 January 1988 on a Community action programme to combat environmental pollution by cadmium ( 5 ) invites the Commission to pursue without delay the development of specific measures for such a programme. Human health also has to be protected and an overall strategy that in particular restricts the use of cadmium and stimulates research into substitutes should therefore be implemented. The Resolution stresses that the use of cadmium should be limited to cases where suitable and safer alternatives do not exist.

    (5)

    The available evidence indicates that measures on the collection, treatment, recycling and disposal of waste electrical and electronic equipment (WEEE) as set out in Directive 2002/96/EC of 27 January 2003 of the European Parliament and of the Council on waste electrical and electronic equipment ( 6 ) are necessary to reduce the waste management problems linked to the heavy metals concerned and the flame retardants concerned. In spite of those measures, however, significant parts of WEEE will continue to be found in the current disposal routes. Even if WEEE were collected separately and submitted to recycling processes, its content of mercury, cadmium, lead, chromium VI, PBB and PBDE would be likely to pose risks to health or the environment.

    (6)

    Taking into account technical and economic feasibility, the most effective way of ensuring the significant reduction of risks to health and the environment relating to those substances which can achieve the chosen level of protection in the Community is the substitution of those substances in electrical and electronic equipment by safe or safer materials. Restricting the use of these hazardous substances is likely to enhance the possibilities and economic profitability of recycling of WEEE and decrease the negative health impact on workers in recycling plants.

    (7)

    The substances covered by this Directive are scientifically well researched and evaluated and have been subject to different measures both at Community and at national level.

    (8)

    The measures provided for in this Directive take into account existing international guidelines and recommendations and are based on an assessment of available scientific and technical information. The measures are necessary to achieve the chosen level of protection of human and animal health and the environment, having regard to the risks which the absence of measures would be likely to create in the Community. The measures should be kept under review and, if necessary, adjusted to take account of available technical and scientific information.

    (9)

    This Directive should apply without prejudice to Community legislation on safety and health requirements and specific Community waste management legislation, in particular Council Directive 91/157/EEC of 18 March 1991 on batteries and accumulators containing certain dangerous substances ( 7 ).

    (10)

    The technical development of electrical and electronic equipment without heavy metals, PBDE and PBB should be taken into account. As soon as scientific evidence is available and taking into account the precautionary principle, the prohibition of other hazardous substances and their substitution by more environmentally friendly alternatives which ensure at least the same level of protection of consumers should be examined.

    (11)

    Exemptions from the substitution requirement should be permitted if substitution is not possible from the scientific and technical point of view or if the negative environmental or health impacts caused by substitution are likely to outweigh the human and environmental benefits of the substitution. Substitution of the hazardous substances in electrical and electronic equipment should also be carried out in a way so as to be compatible with the health and safety of users of electrical and electronic equipment (EEE).

    (12)

    As product reuse, refurbishment and extension of lifetime are beneficial, spare parts need to be available.

    (13)

    The adaptation to scientific and technical progress of the exemptions from the requirements concerning phasing out and prohibition of hazardous substances should be effected by the Commission under a committee procedure.

    (14)

    The measures necessary for the implementation of this Directive should be adopted in accordance with Council Decision 1999/468/EC of 28 June 1999 laying down the procedures for the exercise of implementing powers conferred on the Commission ( 8 ),

    HAVE ADOPTED THIS DIRECTIVE:



    Article 1

    Objectives

    The purpose of this Directive is to approximate the laws of the Member States on the restrictions of the use of hazardous substances in electrical and electronic equipment and to contribute to the protection of human health and the environmentally sound recovery and disposal of waste electrical and electronic equipment.

    Article 2

    Scope

    1.  Without prejudice to Article 6, this Directive shall apply to electrical and electronic equipment falling under the categories 1, 2, 3, 4, 5, 6, 7 and 10 set out in Annex IA to Directive No 2002/96/EC (WEEE) and to electric light bulbs, and luminaires in households.

    2.  This Directive shall apply without prejudice to Community legislation on safety and health requirements and specific Community waste management legislation.

    3.  This Directive does not apply to spare parts for the repair, or to the reuse, of electrical and electronic equipment put on the market before 1 July 2006.

    Article 3

    Definitions

    For the purposes of this Directive, the following definitions shall apply:

    (a) ‘electrical and electronic equipment’ or ‘EEE’ means equipment which is dependent on electric currents or electromagnetic fields in order to work properly and equipment for the generation, transfer and measurement of such currents and fields falling under the categories set out in Annex IA to Directive 2002/96/EC (WEEE) and designed for use with a voltage rating not exceeding 1 000 volts for alternating current and 1 500 volts for direct current;

    (b) ‘producer’ means any person who, irrespective of the selling technique used, including by means of distance communication according to Directive 97/7/EC of the European Parliament and of the Council of 20 May 1997 on the protection of consumers in respect of distance contracts ( 9 ):

    (i) manufactures and sells electrical and electronic equipment under his own brand;

    (ii) resells under his own brand equipment produced by other suppliers, a reseller not being regarded as the ‘producer’ if the brand of the producer appears on the equipment, as provided for in subpoint (i); or

    (iii) imports or exports electrical and electronic equipment on a professional basis into a Member State.

    Whoever exclusively provides financing under or pursuant to any finance agreement shall not be deemed a ‘producer’ unless he also acts as a producer within the meaning of subpoints (i) to (iii).

    Article 4

    Prevention

    1.  Member States shall ensure that, from 1 July 2006, new electrical and electronic equipment put on the market does not contain lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). National measures restricting or prohibiting the use of these substances in electrical and electronic equipment which were adopted in line with Community legislation before the adoption of this Directive may be maintained until 1 July 2006.

    2.  Paragraph 1 shall not apply to the applications listed in the Annex.

    3.  On the basis of a proposal from the Commission, the European Parliament and the Council shall decide, as soon as scientific evidence is available, and in accordance with the principles on chemicals policy as laid down in the Sixth Community Environment Action Programme, on the prohibition of other hazardous substances and the substitution thereof by more environment-friendly alternatives which ensure at least the same level of protection for consumers.

    Article 5

    Adaptation to scientific and technical progress

    ▼M8

    1.  Any amendments which are necessary in order to adapt the Annex to scientific and technical progress for the following purposes shall be adopted:

    ▼B

    (a) establishing, as necessary, maximum concentration values up to which the presence of the substances referred to in Article 4(1) in specific materials and components of electrical and electronic equipment shall be tolerated;

    (b) exempting materials and components of electrical and electronic equipment from Article 4(1) if their elimination or substitution via design changes or materials and components which do not require any of the materials or substances referred to therein is technically or scientifically impracticable, or where the negative environmental, health and/or consumer safety impacts caused by substitution are likely to outweigh the environmental, health and/or consumer safety benefits thereof;

    (c) carrying out a review of each exemption in the Annex at least every four years or four years after an item is added to the list with the aim of considering deletion of materials and components of electrical and electronic equipment from the Annex if their elimination or substitution via design changes or materials and components which do not require any of the materials or substances referred to in Article 4(1) is technically or scientifically possible, provided that the negative environmental, health and/or consumer safety impacts caused by substitution do not outweigh the possible environmental, health and/or consumer safety benefits thereof.

    ▼M8

    The measures referred to in points (a), (b) and (c) of the first subparagraph, designed to amend non-essential elements of this Directive, shall be adopted in accordance with the regulatory procedure with scrutiny referred to in Article 7(2).

    ▼B

    2.  Before the Annex is amended pursuant to paragraph 1, the Commission shall inter alia consult producers of electrical and electronic equipment, recyclers, treatment operators, environmental organisations and employee and consumer associations. Comments shall be forwarded to the Committee referred to in Article 7(1). The Commission shall provide an account of the information it receives.

    Article 6

    Review

    Before 13 February 2005, the Commission shall review the measures provided for in this Directive to take into account, as necessary, new scientific evidence.

    In particular the Commission shall, by that date, present proposals for including in the scope of this Directive equipment which falls under categories 8 and 9 set out in Annex IA to Directive 2002/96/EC (WEEE).

    The Commission shall also study the need to adapt the list of substances of Article 4(1), on the basis of scientific facts and taking the precautionary principle into account, and present proposals to the European Parliament and Council for such adaptations, if appropriate.

    Particular attention shall be paid during the review to the impact on the environment and on human health of other hazardous substances and materials used in electrical and electronic equipment. The Commission shall examine the feasibility of replacing such substances and materials and shall present proposals to the European Parliament and to the Council in order to extend the scope of Article 4, as appropriate.

    ▼M8

    Article 7

    Committee

    1.  The Commission shall be assisted by the Committee set up by Article 18 of Council Directive 75/442/EEC of 15 July 1975 on waste. ( 10 )

    2.  Where reference is made to this paragraph, Article 5a(1) to (4) and Article 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.

    ▼B

    Article 8

    Penalties

    Member States shall determine penalties applicable to breaches of the national provisions adopted pursuant to this Directive. The penalties thus provided for shall be effective, proportionate and dissuasive.

    Article 9

    Transposition

    1.  Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive before 13 August 2004. They shall immediately inform the Commission thereof.

    When Member States adopt those measures, they shall contain a reference to this Directive or be accompanied by such a reference on the occasion of their official publication. The methods of making such a reference shall be laid down by the Member States.

    2.  Member States shall communicate to the Commission the text of all laws, regulations and administrative provisions adopted in the field covered by this Directive.

    Article 10

    Entry into force

    This Directive shall enter into force on the day of its publication in the Official Journal of the European Union.

    Article 11

    Addressees

    This Directive is addressed to the Member States.

    ▼M13




    ANNEX



    Applications exempted from the prohibition in Article 4(1)

    Exemption

    Scope and dates of applicability

    1

    Mercury in single capped (compact) fluorescent lamps not exceeding (per burner):

     

    1(a)

    For general lighting purposes < 30 W: 5 mg

    Expires on 31 December 2011; 3,5 mg may be used per burner after 31 December 2011 until 31 December 2012; 2,5 mg shall be used per burner after 31 December 2012

    1(b)

    For general lighting purposes ≥ 30 W and < 50 W: 5 mg

    Expires on 31 December 2011; 3,5 mg may be used per burner after 31 December 2011

    ▼C1

    1(c)

    For general lighting purposes ≥ 50 W and < 150 W: 5 mg

     

    ▼M13

    1(d)

    For general lighting purposes ≥ 150 W: 15 mg

     

    ▼C1

    1(e)

    For general lighting purposes with circular or square structural shape and tube diameter ≤ 17 mm

    No limitation of use until 31 December 2011; 7 mg may be used per burner after 31 December 2011

    ▼M13

    1(f)

    For special purposes: 5 mg

     

    2(a)

    Mercury in double-capped linear fluorescent lamps for general lighting purposes not exceeding (per lamp):

     

    ▼C1

    2(a)(1)

    Tri-band phosphor with normal lifetime and a tube diameter < 9 mm (e.g. T2): 5 mg

    Expires on 31 December 2011; 4 mg may be used per lamp after 31 December 2011

    2(a)(2)

    Tri-band phosphor with normal lifetime and a tube diameter ≥ 9 mm and ≤ 17 mm (e.g. T5): 5 mg

    Expires on 31 December 2011; 3 mg may be used per lamp after 31 December 2011

    2(a)(3)

    Tri-band phosphor with normal lifetime and a tube diameter > 17 mm and ≤ 28 mm (e.g. T8): 5 mg

    Expires on 31 December 2011; 3,5 mg may be used per lamp after 31 December 2011

    ▼M13

    2(a)(4)

    Tri-band phosphor with normal lifetime and a tube diameter > 28 mm (e.g. T12): 5 mg

    Expires on 31 December 2012; 3,5 mg may be used per lamp after 31 December 2012

    2(a)(5)

    Tri-band phosphor with long lifetime (≥ 25 000 h): 8 mg

    Expires on 31 December 2011; 5 mg may be used per lamp after 31 December 2011

    2(b)

    Mercury in other fluorescent lamps not exceeding (per lamp):

     

    2(b)(1)

    Linear halophosphate lamps with tube > 28 mm (e.g. T10 and T12): 10 mg

    Expires on 13 April 2012

    2(b)(2)

    Non-linear halophosphate lamps (all diameters): 15 mg

    Expires on 13 April 2016

    2(b)(3)

    Non-linear tri-band phosphor lamps with tube diameter > 17 mm (e.g. T9)

    No limitation of use until 31 December 2011; 15 mg may be used per lamp after 31 December 2011

    2(b)(4)

    Lamps for other general lighting and special purposes (e.g. induction lamps)

    No limitation of use until 31 December 2011; 15 mg may be used per lamp after 31 December 2011

    3

    Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for special purposes not exceeding (per lamp):

     

    ▼C1

    3(a)

    Short length (≤ 500 mm)

    No limitation of use until 31 December 2011; 3,5 mg may be used per lamp after 31 December 2011

    3(b)

    Medium length (> 500 mm and ≤ 1 500 mm)

    No limitation of use until 31 December 2011; 5 mg may be used per lamp after 31 December 2011

    ▼M13

    3(c)

    Long length (> 1 500 mm)

    No limitation of use until 31 December 2011; 13 mg may be used per lamp after 31 December 2011

    4(a)

    Mercury in other low pressure discharge lamps (per lamp)

    No limitation of use until 31 December 2011; 15 mg may be used per lamp after 31 December 2011

    4(b)

    Mercury in High Pressure Sodium (vapour) lamps for general lighting purposes not exceeding (per burner) in lamps with improved colour rendering index Ra > 60:

     

    ▼C1

    4(b)-I

    P ≤ 155 W

    No limitation of use until 31 December 2011; 30 mg may be used per burner after 31 December 2011

    4(b)-II

    155 W < P ≤ 405 W

    No limitation of use until 31 December 2011; 40 mg may be used per burner after 31 December 2011

    ▼M13

    4(b)-III

    P > 405 W

    No limitation of use until 31 December 2011; 40 mg may be used per burner after 31 December 2011

    4(c)

    Mercury in other High Pressure Sodium (vapour) lamps for general lighting purposes not exceeding (per burner):

     

    ▼C1

    4(c)-I

    P ≤ 155 W

    No limitation of use until 31 December 2011; 25 mg may be used per burner after 31 December 2011

    4(c)-II

    155 W < P ≤ 405 W

    No limitation of use until 31 December 2011; 30 mg may be used per burner after 31 December 2011

    ▼M13

    4(c)-III

    P > 405 W

    No limitation of use until 31 December 2011; 40 mg may be used per burner after 31 December 2011

    4(d)

    Mercury in High Pressure Mercury (vapour) lamps (HPMV)

    Expires on 13 April 2015

    4(e)

    Mercury in metal halide lamps (MH)

     

    4(f)

    Mercury in other discharge lamps for special purposes not specifically mentioned in this Annex

     

    5(a)

    Lead in glass of cathode ray tubes

     

    5(b)

    Lead in glass of fluorescent tubes not exceeding 0,2 % by weight

     

    6(a)

    Lead as an alloying element in steel for machining purposes and in galvanized steel containing up to 0,35 % lead by weight

     

    6(b)

    Lead as an alloying element in aluminium containing up to 0,4 % lead by weight

     

    6(c)

    Copper alloy containing up to 4 % lead by weight

     

    7(a)

    Lead in high melting temperature type solders (i.e. lead-based alloys containing 85 % by weight or more lead)

     

    7(b)

    Lead in solders for servers, storage and storage array systems, network infrastructure equipment for switching, signalling, transmission, and network management for telecommunications

     

    7(c)-I

    Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound

     

    7(c)-II

    Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher

     

    7(c)-III

    Lead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or 250 V DC

    Expires on 1 January 2013 and after that date may be used in spare parts for EEE placed on the market before 1 January 2013

    8(a)

    Cadmium and its compounds in one shot pellet type thermal cut-offs

    Expires on 1 January 2012 and after that date may be used in spare parts for EEE placed on the market before 1 January 2012

    8(b)

    Cadmium and its compounds in electrical contacts

     

    9

    Hexavalent chromium as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators up to 0,75 % by weight in the cooling solution

     

    9(b)

    Lead in bearing shells and bushes for refrigerant-containing compressors for heating, ventilation, air conditioning and refrigeration (HVACR) applications

     

    11(a)

    Lead used in C-press compliant pin connector systems

    May be used in spare parts for EEE placed on the market before 24 September 2010

    11(b)

    Lead used in other than C-press compliant pin connector systems

    Expires on 1 January 2013 and after that date may be used in spare parts for EEE placed on the market before 1 January 2013

    12

    Lead as a coating material for the thermal conduction module C-ring

    May be used in spare parts for EEE placed on the market before 24 September 2010

    13(a)

    Lead in white glasses used for optical applications

     

    13(b)

    Cadmium and lead in filter glasses and glasses used for reflectance standards

     

    14

    Lead in solders consisting of more than two elements for the connection between the pins and the package of microprocessors with a lead content of more than 80 % and less than 85 % by weight

    Expires on 1 January 2011 and after that date may be used in spare parts for EEE placed on the market before 1 January 2011

    15

    Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages

     

    16

    Lead in linear incandescent lamps with silicate coated tubes

    Expires on 1 September 2013

    17

    Lead halide as radiant agent in high intensity discharge (HID) lamps used for professional reprography applications

     

    18(a)

    Lead as activator in the fluorescent powder (1 % lead by weight or less) of discharge lamps when used as speciality lamps for diazoprinting reprography, lithography, insect traps, photochemical and curing processes containing phosphors such as SMS ((Sr,Ba)2MgSi2O7:Pb)

    Expires on 1 January 2011

    18(b)

    Lead as activator in the fluorescent powder (1 % lead by weight or less) of discharge lamps when used as sun tanning lamps containing phosphors such as BSP (BaSi2O5:Pb)

     

    19

    Lead with PbBiSn-Hg and PbInSn-Hg in specific compositions as main amalgam and with PbSn-Hg as auxiliary amalgam in very compact energy saving lamps (ESL)

    Expires on 1 June 2011

    20

    Lead oxide in glass used for bonding front and rear substrates of flat fluorescent lamps used for Liquid Crystal Displays (LCDs)

    Expires on 1 June 2011

    21

    Lead and cadmium in printing inks for the application of enamels on glasses, such as borosilicate and soda lime glasses

     

    23

    Lead in finishes of fine pitch components other than connectors with a pitch of 0,65 mm and less

    May be used in spare parts for EEE placed on the market before 24 September 2010

    24

    Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors

     

    25

    Lead oxide in surface conduction electron emitter displays (SED) used in structural elements, notably in the seal frit and frit ring

     

    26

    Lead oxide in the glass envelope of black light blue lamps

    Expires on 1 June 2011

    27

    Lead alloys as solder for transducers used in high-powered (designated to operate for several hours at acoustic power levels of 125 dB SPL and above) loudspeakers

    Expired on 24 September 2010

    29

    Lead bound in crystal glass as defined in Annex I (Categories 1, 2, 3 and 4) of Council Directive 69/493/EEC (1)

     

    30

    Cadmium alloys as electrical/mechanical solder joints to electrical conductors located directly on the voice coil in transducers used in high-powered loudspeakers with sound pressure levels of 100 dB (A) and more

     

    31

    Lead in soldering materials in mercury free flat fluorescent lamps (which e.g. are used for liquid crystal displays, design or industrial lighting)

     

    32

    Lead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes

     

    33

    Lead in solders for the soldering of thin copper wires of 100 μm diameter and less in power transformers

     

    34

    Lead in cermet-based trimmer potentiometer elements

     

    36

    Mercury used as a cathode sputtering inhibitor in DC plasma displays with a content up to 30 mg per display

    Expired on 1 July 2010

    37

    Lead in the plating layer of high voltage diodes on the basis of a zinc borate glass body

     

    38

    Cadmium and cadmium oxide in thick film pastes used on aluminium bonded beryllium oxide

     

    39

    Cadmium in colour converting II-VI LEDs (< 10 μg Cd per mm2 of light-emitting area) for use in solid state illumination or display systems

    Expires on 1 July 2014

    (1)   OJ L 326, 29.12.1969, p. 36.

    Note: For the purposes of Article 5(1)(a) of Directive 2002/95/EC, a maximum concentration value of 0,1 % by weight in homogeneous materials for lead, mercury, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) and of 0,01 % by weight in homogeneous materials for cadmium shall be tolerated.



    ( 1 ) OJ C 365 E, 19.12.2000, p. 195 and OJ C 240 E, 28.8.2001, p. 303.

    ( 2 ) OJ C 116, 20.4.2001, p. 38.

    ( 3 ) OJ C 148, 18.5.2001, p. 1.

    ( 4 ) Opinion of the European Parliament of 15 May 2001 (OJ C 34 E, 7.2.2002, p. 109), Council Common Position of 4 December 2001 (OJ C 90 E, 16.4.2002, p. 12) and Decision of the European Parliament of 10 April 2002 (not yet published in the Official Journal). Decision of the European Parliament of 18 December 2002 and Decision of the Council of 16 December 2002.

    ( 5 ) OJ C 30, 4.2.1988, p. 1.

    ( 6 ) See page 24 of this Official Journal.

    ( 7 ) OJ L 78, 26.3.1991, p. 38. Directive as amended by Commission Directive 98/101/EC (OJ L 1, 5.1.1999, p. 1).

    ( 8 ) OJ L 184, 17.7.1999, p. 23.

    ( 9 ) OJ L 144, 4.6.1997, p. 19. Directive as amended by Directive 2002/65/EC (L 271, 9.10.2002, p. 16).

    ( 10 ) OJ L 194, 25.7.1975, p. 39. Directive as last amended by Regulation (EC) No 1882/2003 of the European Parliament and of the Council (OJ L 284, 31.10.2003, p. 1).

    Top