Choose the experimental features you want to try

This document is an excerpt from the EUR-Lex website

Document 01989L0656-20190726

    Consolidated text: Council Directive of 30 November 1989 on the minimum health and safety requirements for the use by workers of personal protective equipment at the workplace (third individual directive within the meaning of Article 16 (1) of Directive 89/391/EEC) (89/656/EEC)

    ELI: http://data.europa.eu/eli/dir/1989/656/2019-07-26

    01989L0656 — EN — 26.07.2019 — 002.001


    This text is meant purely as a documentation tool and has no legal effect. The Union's institutions do not assume any liability for its contents. The authentic versions of the relevant acts, including their preambles, are those published in the Official Journal of the European Union and available in EUR-Lex. Those official texts are directly accessible through the links embedded in this document

    ►B

    COUNCIL DIRECTIVE

    of 30 November 1989

    on the minimum health and safety requirements for the use by workers of personal protective equipment at the workplace (third individual directive within the meaning of Article 16 (1) of Directive 89/391/EEC)

    (89/656/EEC)

    (OJ L 393 30.12.1989, p. 18)

    Amended by:

     

     

    Official Journal

      No

    page

    date

    ►M1

    DIRECTIVE 2007/30/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL Text with EEA relevance of 20 June 2007

      L 165

    21

    27.6.2007

    ►M2

    REGULATION (EU) 2019/1243 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 20 June 2019

      L 198

    241

    25.7.2019


    Corrected by:

    ►C1

    Corrigendum, OJ L 059, 6.3.1991, p.  24  (1989/656)




    ▼B

    COUNCIL DIRECTIVE

    of 30 November 1989

    on the minimum health and safety requirements for the use by workers of personal protective equipment at the workplace (third individual directive within the meaning of Article 16 (1) of Directive 89/391/EEC)

    (89/656/EEC)



    SECTION I

    GENERAL PROVISIONS

    Article 1

    Subject

    1.  This Directive, which is the third individual directive within the meaning of Article 16 (1) of Directive 89/391/EEC, lays down minimum requirements for personal protective equipment used by workers at work.

    2.  The provisions of Directive 89/391/EEC are fully applicable to the whole scope referred to in paragraph 1, without prejudice to more ►C1  stringent ◄ and/or specific provisions contained in this Directive.

    Article 2

    Definition

    1.  For the purposes of this Directive, personal protective equipment shall mean all equipment designed to be worn or held by the worker to protect him against one or more hazards likely to endanger his safety and health at work, and any addition or accessory designed to meet this objective.

    2.  The definition in paragraph 1 excludes:

    (a) ordinary working clothes and uniforms not specifically designed to protect the safety and health of the worker;

    (b) equipment used by emergency and rescue services;

    (c) personal protective equipment worn or used by the military, the police and other public order agencies;

    (d) personal protective equipment for means of road transport;

    (e) sports equipment;

    (f) self-defence or deterrent equipment;

    (g) portable devices for detecting and signalling risks and nuisances.

    Article 3

    General rule

    Personal protective equipment shall be used when the risks cannot be avoided or sufficiently limited by technical means of collective protection or by measures, methods or procedures of work organization.



    SECTION II

    EMPLOYERS’ OBLIGATIONS

    Article 4

    General provisions

    1.  Personal protective equipment must comply with the relevant Community provisions on design and manufacture with respect to safety and health.

    All personal protective equipment must:

    (a) be appropriate for the risks involved, without itself leading to any increased risk;

    (b) correspond to existing conditions at the workplace;

    (c) take account of ergonomic requirements and the worker's state of health;

    (d) fit the wearer correctly after any necessary adjustment.

    2.  Where the presence of more than one risk makes it necessary for a worker to wear simultaneously more than one item of personal protective equipment, such equipment must be compatible and continue to be effective against the risk or risks in question.

    3.  The conditions of use of personal protective equipment, in particular the period for which it is worn, shall be determined on the basis of the seriousness of the risk, the frequency of exposure to the risk, the characteristics of the workstation of each worker and the performance of the personal protective equipment.

    4.  Personal protective equipment is, in principle, intended for personal use.

    If the circumstances require personal protective equipment to be worn by more than one person, appropriate measures shall be taken to ensure that such use does not create any health or hygiene problem for the different users.

    5.  Adequate information on each item of personal protective equipment, required under paragraphs 1 and 2, shall be provided and made available within the undertaking and/or establishment.

    6.  Personal protective equipment shall be provided free of charge by the employer, who shall ensure its good working order and satisfactory hygienic condition by means of the necessary maintenance, repair and replacements.

    However, Member States may provide, in accordance with their national practice, that the worker be asked to contribute towards the cost of certain personal protective equipment in circumstances where use of the equipment is not exclusive to the workplace.

    7.  The employer shall first inform the worker of the risks against which the wearing of the personal protective equipment protects him.

    8.  The employer shall arrange for training and shall, if appropriate, organize demonstrations in the wearing of personal protective equipment.

    9.  Personal protective equipment may be used only for the purposes specified, except in specific and exceptional circumstances.

    It must be used in accordance with instructions.

    Such instructions must be understandable to the workers.

    Article 5

    Assessment of personal protective equipment

    1.  Before choosing personal protective equipment, the employer is required to assess whether the personal protective equipment he intends to use satisfies the requirements of Article 4(1) and (2).

    This assessment shall involve:

    (a) an analysis and assessment of risks which cannot be avoided by other means;

    (b) the definition of the characteristics which personal protective equipment must have in order to be effective against the risks referred to in (a), taking into account any risks which this equipment itself may create;

    (c) comparison of the characteristics of the personal protective equipment available with the characteristics referred to in (b).

    2.  The assessment provided for in paragraph 1 shall be reviewed if any changes are made to any of its elements.

    Article 6 ( 1 )

    Rules for use

    1.  Without prejudice to Articles 3, 4 and 5, Member States shall ensure that general rules are established for the use of personal protective equipment and/or rules covering cases and situations where the employer must provide the personal protective equipment, taking account of Community legislation on the free movement of such equipment.

    These rules shall indicate in particular the circumstances or the risk situations in which, without prejudice to the priority to be given to collective means of protection, the use of personal protective equipment is necessary.

    Annexes I, II and III, which constitute a guide, contain useful information for establishing such rules.

    2.  When Member States adapt the rules referred to in paragraph 1, they shall take account of any significant changes to the risk, collective means of protection and personal protective equipment brought about by technological developments.

    3.  Member States shall consult the employers' and workers' organization on the rules referred to in paragraphs 1 and 2.

    Article 7

    Information for workers

    Without prejudice to Article 10 of Directive 89/391/EEC, workers and/or their representatives shall be informed of all measures to be taken with regard to the health and safety of workers when personal protective equipment is used by workers at work.

    Article 8

    Consultation of workers and workers' participation

    Consultation and participation of workers and/or of their representatives shall take place in accordance with Article 11 of Directive 89/391/EEC on the matters covered by this Directive, including the Annexes thereto.



    SECTION III

    MISCELLANEOUS PROVISIONS

    ▼M2

    Article 9

    Amendments to the Annexes

    The Commission is empowered to adopt delegated acts in accordance with Article 9a to make strictly technical amendments to the Annexes, in order to take account of technical harmonisation and standardisation relating to personal protective equipment, technical progress, changes in international regulations or specifications and knowledge in the field of personal protective equipment.

    Where, in duly justified and exceptional cases involving imminent, direct and serious risks to workers’ and other persons’ physical health and safety, imperative grounds of urgency require action in a very short timeframe, the procedure provided for in Article 9b shall apply to delegated acts adopted pursuant to this Article.

    ▼M2

    Article 9a

    Exercise of the delegation

    1.  The power to adopt delegated acts is conferred on the Commission subject to the conditions laid down in this Article.

    2.  The power to adopt delegated acts referred to in Article 9 shall be conferred on the Commission for a period of five years from 26 July 2019. The Commission shall draw up a report in respect of the delegation of power not later than nine months before the end of the five-year period. The delegation of power shall be tacitly extended for periods of an identical duration, unless the European Parliament or the Council opposes such extension not later than three months before the end of each period.

    3.  The delegation of power referred to in Article 9 may be revoked at any time by the European Parliament or by the Council. A decision to revoke shall put an end to the delegation of the power specified in that decision. It shall take effect the day following the publication of the decision in the Official Journal of the European Union or at a later date specified therein. It shall not affect the validity of any delegated acts already in force.

    4.  Before adopting a delegated act, the Commission shall consult experts designated by each Member State in accordance with the principles laid down in the Interinstitutional Agreement of 13 April 2016 on Better Law-Making ( 2 ).

    5.  As soon as it adopts a delegated act, the Commission shall notify it simultaneously to the European Parliament and to the Council.

    6.  A delegated act adopted pursuant to Article 9 shall enter into force only if no objection has been expressed either by the European Parliament or the Council within a period of two months of notification of that act to the European Parliament and the Council or if, before the expiry of that period, the European Parliament and the Council have both informed the Commission that they will not object. That period shall be extended by two months at the initiative of the European Parliament or of the Council.

    Article 9b

    Urgency procedure

    1.  Delegated acts adopted under this Article shall enter into force without delay and shall apply as long as no objection is expressed in accordance with paragraph 2. The notification of a delegated act to the European Parliament and the Council shall state the reasons for the use of the urgency procedure.

    2.  Either the European Parliament or the Council may object to a delegated act in accordance with the procedure referred to in Article 9a(6). In such a case, the Commission shall repeal the act immediately following the notification of the decision to object by the European Parliament or by the Council.

    ▼B

    Article 10

    Final provisions

    1.  Member States shall bring; into force the laws, regulations and administrative provisions necessary to comply with this Directive not later than 31 December 1992. They shall immediately inform the Commission thereof.

    2.  Member States shall communicate to the Commission the text of the provisions of national law which they adopt, as well as those already adopted, in the field covered by this Directive.

    ▼M1 —————

    ▼B

    Article 11

    This Directive is addressed to the Member States.




    ANNEX I

    SPECIMEN RISK SURVEY TABLE FOR THE USE OF PERSONAL PROTECTIVE EQUIPMENT

    image




    ANNEX II

    NON-EXHAUSTIVE GUIDE LIST OF ITEMS OF PERSONAL PROTECTIVE EQUIPMENT

    HEAD PROTECTION

     Protective helmets for use in industry (mines, building sites, other industrial uses).

     Scalp protection (caps, bonnets, hairnets— with or without eye shade).

     Protective headgear (bonnets, caps, sou’westers, etc. in fabric, fabric with proofing, etc.).

    HEARING PROTECTION

     Earplugs and similar devices.

     Full acoustic helmets.

     Earmuffs which can be fitted to industrial helmets.

     Ear defenders with receiver for LF induction loop.

     Ear protection with intercom equipment.

    EYE AND FACE PROTECTION

     Spectacles.

     Goggles.

     X-ray goggles, laser-beam goggles, ultra-violet, infra-red, visible radiation goggles.

     Face shields.

     Arc-welding masks and helmets (hand masks, headband masks or masks which can be fitted to protective helmets).

    RESPIRATORY PROTECTION

     Dust filters, gas filters and radioactive dust filters.

     Insulating appliances with an air supply.

     Respiratory devices including a removable welding mask.

     Diving equipment.

     Diving suits.

    HAND AND ARM PROTECTION

     Gloves to provide protection:

     

     from machinery (piercing, cuts, vibrations, etc.),

     from chemicals,

     for electricians and from heat.

     Mittens.

     Finger stalls.

     Over sleeves.

     Wrist protection for heavy work.

     Fingerless gloves.

     Protective gloves.

    FOOT AND LEG PROTECTION

     Low shoes, ankle boots, calf-length boots, safety boots.

     Shoes which can be unlaced or unhooked rapidly.

     Shoes with additional protective toe-cap.

     Shoes and overshoes with heat-resistant soles.

     Heat-resistant shoes, boots and overboots.

     Thermal shoes, boots and overboots.

     Vibration-resistant shoes, boots and overboots.

     Anti-static shoes, boots and overboots.

     Insulating shoes, boots and overboots.

     Protective boots for chain saw operators.

     Clogs.

     Kneepads.

     Removable instep protectors.

     Gaiters.

     Removable soles (heat-proof, pierce-proof or sweat-proof).

     Removable spikes for ice, snow or slippery flooring.

    SKIN PROTECTION

     Barrier creams/ointments.

    TRUNK AND ABDOMEN PROTECTION

     Protective waistcoats, jackets and aprons to provide protection from machinery (piercing, cutting, molten metal splashes, etc.).

     Protective waistcoats, jackets and aprons to provide protection from chemicals.

     Heated Waistcoats.

     Life jackets.

     Protective X-ray aprons.

     Body belts.

    WHOLE BODY PROTECTION

    —   Equipment designed to prevent falls

     Fall-prevention equipment (full equipment with all necessary accessories).

     Braking equipment to absorb kinetic energy (full equipment with all necessary accessories).

     Body-holding devices (safety harness).

    —   Protective clothing

     ‘Safety’ working clothing (two-piece and overalls).

     Clothing to provide protection from machinery (piercing, cutting, etc.).

     Clothing to provide protection from chemicals.

     Clothing to provide protection from molten metal splashes and infra-red radiation.

     Heat-resistant clothing.

     Thermal clothing.

     Clothing to provide protection from radioactive contamination.

     Dust-proof clothing.

     Gas-proof clothing.

     Fluorescent signalling, retro-reflecting clothing and accessories (armbands, gloves, etc.).

     Protective coverings.




    ANNEX III

    NON-EXHAUSTIVE GUIDE LIST OF ACTIVITIES AND SECTORS OF ACTIVITY WHICH MAY REQUIRE THE PROVISION OF PERSONAL PROTECTIVE EQUIPMENT

    1.   HEAD PROTECTION (SKULL PROTECTION)

    Protective helmets

     Building work, particularly work on, underneath or in the vicinity of scaffolding and elevated workplaces, erection and stripping of formwork, assembly and installation work, work on scaffolding and demolition work.

     Work on steel bridges, steel building construction, masts, towers, steel hydraulic structures, blast furnaces, steel works and rolling mills, large containers, large pipelines, boiler plants and power stations.

     Work in pits, trenches, shafts and tunnels.

     Earth and rock works.

     Work in underground workings, quarries, open diggings, coal stock removal.

     Work with bolt-driving tools.

     Blasting work.

     Work in the vicinity of lifts, lifting gear, cranes and conveyors.

     Work with blast furnaces, direct reduction plants, steelworks, rolling mills, metalworks, forging, drop forging and casting.

     Work with industrial furnaces, containers, machinery, silos, bunkers and pipelines.

     Shipbuilding.

     Railway shunting work.

     Slaughterhouses.

    2.   FOOT PROTECTION

    Safety shoes with puncture-proof soles

     Carcase work, foundation work and road works.

     Scaffolding work.

     The demolition of carcase work.

     Work with concrete and prefabricated parts involving formwork erection and stripping.

     Work in contractors' yards and warehouses.

     Roof work.

    Safety shoes without pierce-proof soles

     Work on steel bridges, steel building construction, masts, towers, lifts, steel hydraulic structures, blast furnaces, steelworks and rolling mills, large containers, large pipelines, cranes, boiler plants and power stations.

     Furnace construction heating and ventilation installation and metal assembly work.

     Conversion and maintenance work.

     Work with blast furnaces, direct reduction plants, steelworks, rolling mills, metalworks, forging, drop forging, hot pressing and drawing plants.

     Work in quarries and open diggings, coal stock removal.

     Working and processing of rock.

     Flat glass products and container glassware manufacture, working and processing.

     Work with moulds in the ceramics industry.

     Lining of kilns in the ceramics industry.

     Moulding work in the ceramic ware and building materials industry.

     Transport and storage.

     Work with frozen meat blocks and preserved foods packaging.

     Shipbuilding.

     Railway shunting work.

    Safety shoes with heels or wedges and pierce-proof soles

     Roof work.

    Protective shoes with insulated soles

     Work with and on very hot or very cold materials.

    Safety shoes which can easily be removed

     Where there is a risk of penetration by molten substances.

    3.   EYE OR FACE PROTECTION

    Protective goggles, face shields or screens

     Welding, grinding and separating work.

     Caulking and chiselling.

     Rock working and processing.

     Work with bolt-driving tools.

     Work on stock removing machines for small chippings.

     Drop forging.

     The removal and breaking up of fragments.

     Spraying of abrasive substances.

     Work with acids and caustic solutions, disinfectants and corrosive cleaning products.

     Work with liquid sprays.

     Work with and in the vicinity of molten substances.

     Work with radiant heat.

     Work with lasers.

    4.   RESPIRATORY PROTECTION

    Respirators/breathing apparatus

     Work in containers, restricted areas and gas-fired industrial furnaces where there may be gas or insufficient oxygen.

     Work in the vicinity of the blast furnace charge.

     Work in the vicinity of gas converters and blast furnace gas pipes.

     Work in the vicinity of blast furnace taps where there may be heavy metal fumes.

     Work on the lining of furnaces and ladles where there may be dust.

     Spray painting where dedusting is inadequate.

     Work in shafts, sewers and other underground areas connected with sewage.

     Work in refrigeration plants where there is a danger that the refrigerant may escape.

    5.   HEARING PROTECTION

    Ear protectors

     Work with metal presses.

     Work with pneumatic drills.

     The work of ground staff at airports.

     Pile-driving work.

     Wood and textile working.

    6.   BODY, ARM AND HAND PROTECTION

    Protective clothing

     Work with acids and caustic solutions, disinfectants and corrosive cleaning substances.

     Work with or in the vicinity of hot materials and where the effects of heat are felt.

     Work on flat glass products.

     Shot blasting.

     Work in deep-freeze rooms.

    Fire-resistant protective clothing

     Welding in restricted areas.

    Pierce-proof aprons

     Boning and cutting work.

     Work with hand knives involving drawing the knife towards the body.

    Leather aprons

     Welding.

     Forging.

     Casting.

    Forearm protection

     Boning and cutting.

    Gloves

     Welding.

     Handling of sharp-edged objects, other than machines where there is a danger of the glove's being caught.

     Unprotected work with acids and caustic solutions.

    Metal mesh gloves

     Boning and cutting.

     Regular cutting using a hand knife for production and slaughtering.

     Changing the knives of cutting machines.

    7.   WEATHERPROOF CLOTHING

     Work in the open air in rain and cold weather.

    8.   REFLECTIVE CLOTHING

     Work where the workers must be clearly visible.

    9.   SAFETY HARNESSES

     Work on scaffolding.

     Assembly of prefabricated parts.

     Work on masts.

    10.   SAFETY ROPES

     Work in high crane cabs.

     Work in high cabs of warehouse stacking and retrieval equipment.

     Work in high sections of drilling towers.

     Work in shafts and sewers.

    11.   SKIN PROTECTION

     Processing of coating materials.

     Tanning.



    ( 1 ) See the Commission communication (OJ No C 328, 30.12.1989, p. 3).

    ( 2 ) OJ L 123, 12.5.2016, p. 1.

    Top