EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 22019A0605(01)

Voluntary Partnership Agreement between the European Union and the Socialist Republic of Viet Nam on forest law enforcement, governance and trade

ST/10877/2018/INIT

OJ L 147, 5.6.2019, p. 3–209 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

In force

5.6.2019   

EN

Official Journal of the European Union

L 147/3


VOLUNTARY PARTNERSHIP AGREEMENT

between the European Union and the Socialist Republic of Viet Nam on forest law enforcement, governance and trade

THE EUROPEAN UNION, hereinafter referred to as “the Union”,

and

THE GOVERNMENT OF THE SOCIALIST REPUBLIC OF VIET NAM, hereinafter referred to as “Viet Nam”,

hereinafter jointly referred to as “the Parties”,

CONSIDERING the Communication from the European Commission to the Council of the European Union and to the European Parliament on an EU Action Plan for Forest Law Enforcement, Governance and Trade (FLEGT) as a first step towards tackling the urgent issue of illegal logging and associated trade;

REAFFIRMING the importance of the principles and commitments set out in the Declaration on the United Nations 2030 Agenda for Sustainable Development of 2015, in particular the commitment to achieve sustainable development in its three dimensions – economic, social and environmental – in a balanced and integrated manner;

RECALLING in this respect the Sustainable Development Goals and targets, in particular the target (15.2) to promote, by 2020, the implementation of sustainable management of all types of forests, halt deforestation, restore degraded forests and substantially increase afforestation and reforestation globally;

AWARE of the importance of the principles set out in the 1992 Rio Declaration on Environment and Development in the context of securing sustainable forest management and, in particular, of Principle 10 concerning the importance of public awareness and participation in environmental issues and of Principle 22 concerning the vital role of indigenous people and other local communities in environmental management and development;

REAFFIRMING the importance attached by the Parties to the principles and rules which govern the multilateral trading systems, in particular the rights and obligations laid down in the General Agreement on Tariffs and Trade (GATT) 1994 and in other multilateral agreements listed in Annex IA to the Marrakesh Agreement of 15 April 1994 establishing the World Trade Organization (WTO), and the need to apply them in a transparent and non-discriminatory manner;

HAVING REGARD to the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES) and, in particular, the requirement that CITES export permits issued by the Parties to CITES for specimens of species listed in Appendix I, II or III to CITES be granted only under certain conditions, including that such specimens were not obtained in breach of the relevant laws for the protection of fauna and flora;

RECALLING the Framework Agreement on Comprehensive Partnership and Cooperation between the European Union and its Member States, of the one part, and the Socialist Republic of Viet Nam, of the other part, signed in Brussels on 27 June 2012;

RECALLING the recent conclusion of negotiations for a Free Trade Agreement between the Union and the Socialist Republic of Viet Nam, and in particular the commitments therein related to sustainable forest management and trade in forest products;

RECOGNISING efforts by the Government of Viet Nam to promote good forestry governance, law enforcement and the trade in legal timber, including through the Viet Nam Timber Legality Assurance System (“VNTLAS”), which will be developed through a multi-stakeholder process in accordance with the principles of good governance, credibility and representativeness;

RECOGNISING that the implementation of this Agreement will reinforce sustainable forest management and contribute to combating climate change through reduced emissions from deforestation and forest degradation and the role of conservation, sustainable management of forest and enhancement of forest carbon stocks (REDD+);

RECOGNISING that stakeholders have a crucial role to play in the implementation of this Agreement and that it is therefore essential that effective mechanisms for their contribution to the enforcement of the VNTLAS are in place;

RECOGNISING that the publication of information is essential to improve governance and that the provision of information to stakeholders should therefore be central to this Agreement in order to facilitate the implementation and monitoring of systems, increase transparency, and thus improve stakeholder and consumer confidence, as well as to ensure accountability of the Parties;

RESOLVED that the Parties shall seek to minimise any adverse impacts on local communities and poor people which may arise as a direct consequence of implementing this Agreement;

REAFFIRMING the principles of mutual respect, sovereignty, equality and non-discrimination and recognising the benefits to the Parties arising from this Agreement;

AFFIRMING that, in accordance with the Law on Treaties No. 108/2016/QH13 dated 9 April 2016 of Viet Nam, this Agreement shall be approved by the Government of the Socialist Republic of Viet Nam, thereby expressing the consent of the Socialist Republic of Viet Nam to be bound by this Agreement;

PURSUANT to the respective laws and regulations of the Parties,

HEREBY AGREE AS FOLLOWS:

Article 1

Objective

1.   The objective of this Agreement, consistent with the Parties’ common commitment to the sustainable management of all types of forest, is to provide a legal framework aimed at ensuring that all imports into the Union from Viet Nam of timber and timber products covered by this Agreement have been legally produced and, in doing so, to promote trade in timber products that are from sustainably managed forests and harvested in accordance with the domestic legislation in the country of harvest.

2.   This Agreement also provides a basis for dialogue and cooperation between the Parties to facilitate and promote the full implementation of this Agreement and enhance forest law enforcement and governance.

Article 2

Definitions

For the purposes of this Agreement, the following definitions apply:

(a)

“import into the Union” means the release for free circulation into the Union, within the meaning of Article 201 of Regulation (EU) No 952/2013 of the European Parliament and of the Council (1), of timber products which cannot be classified as “goods of a non-commercial nature” as defined in point 21 of Article 1 of Commission Delegated Regulation (EU) 2015/2446 (2);

(b)

“export” means the physical leaving or taking out of timber products from any part of the geographical territory of Viet Nam, except for timber products in transit through Viet Nam;

(c)

“timber products in transit” means any timber products originating from a third country which enter the territory of Viet Nam under customs control and leave it in the same form whilst retaining their country of origin;

(d)

“timber products” means the products listed in Annex I;

(e)

“HS code” means a four- or six-digit code as set out in the nomenclature of the Harmonized Commodity Description and Coding System established by the International Convention on the Harmonized Commodity Description and Coding System of the World Customs Organization;

(f)

“FLEGT licence” means a Vietnamese legal document which confirms that a shipment of timber products intended for export to the Union has been legally produced and verified in accordance with the criteria laid down in this Agreement. A FLEGT licence may be in paper or electronic form;

(g)

“Licensing Authority” means the authority designated by Viet Nam to issue and validate FLEGT licences;

(h)

“competent authorities” means the authorities designated by the Member States of the Union to receive, accept and verify FLEGT licences;

(i)

“shipment” means a quantity of timber products covered by a FLEGT licence that is sent by a consignor or a shipper from Viet Nam and is presented for release for free circulation at a customs office in the Union;

(j)

“legally produced timber” (hereinafter also referred to as “legal timber”) means timber products harvested or imported and produced in accordance with the legislation of Viet Nam set out in Annex II and other relevant provisions of this Agreement; and, in the case of imported timber, it means timber products harvested, produced and exported in accordance with the relevant legislation of the country of harvest and the procedures described in Annex V;

(k)

“release for free circulation” means a Union customs procedure which confers the customs status of Union goods on goods which are not from the Union (in accordance with Regulation (EU) No 952/2013), entailing the collection of any import duties due; the collection, as appropriate, of other charges; the application of commercial policy measures and prohibitions and restrictions; and the completion of other formalities laid down in respect of the importation of goods;

(l)

“verification of verifiers” means the process of checking the legality, validity and conformity of verifiers on the basis of documentary and/or physical checks by the verification entities in accordance with the regulations set out in the Legality Definition in Annex II.

Article 3

FLEGT licensing scheme

1.   A forest law enforcement, governance and trade (FLEGT) licensing scheme is hereby established between the Parties. It establishes a set of procedures and requirements aimed at verifying and attesting, by means of FLEGT licences, that timber products shipped to the Union were legally produced. In accordance with Council Regulation (EC) No 2173/2005 (3) and this Agreement, the Union shall accept such shipments from Viet Nam for import into the Union only if they are covered by FLEGT licences.

2.   The FLEGT licensing scheme shall apply to the timber products listed in Annex I.

3.   The Parties agree to take all measures necessary to implement the FLEGT licensing scheme.

Article 4

Licensing Authority

1.   Viet Nam shall designate the Licensing Authority and notify its contact details to the European Commission. Both Parties shall make that information available to the public.

2.   The Licensing Authority shall verify that timber products have been legally produced in accordance with the legislation identified in Annex II. The Licensing Authority shall issue FLEGT licences covering shipments of timber products that are legally produced in Viet Nam for export to the Union.

3.   The Licensing Authority shall not issue FLEGT licences for any shipment of timber products that has not been legally produced in accordance with the Vietnamese legislation specified in Annex II or, in the case of imported timber, timber products that have not been harvested, produced or exported in accordance with the legislation of the country of harvest and of the country of production.

4.   The Licensing Authority shall maintain and make publicly available its procedures for issuing FLEGT licences. It shall also maintain records of all shipments covered by FLEGT licences, consistent with national legislation concerning data protection, and shall provide such records for the purposes of the independent evaluation referred to in Article 10, while respecting the confidentiality of exporters’ proprietary information.

Article 5

Competent authorities

1.   The European Commission shall inform Viet Nam of the contact details of the competent authorities designated by the Member States of the Union. Both Parties shall make that information available to the public.

2.   The competent authorities shall verify that each shipment is covered by a valid FLEGT licence before releasing that shipment for free circulation in the Union. The release of the shipment may be suspended and the shipment may be held if there are doubts regarding the validity of the FLEGT licence.

3.   The competent authorities shall maintain and publish annually a record of FLEGT licences received.

4.   The competent authorities shall grant persons or bodies designated by Viet Nam as Independent Evaluator in accordance with Article 10 access to the relevant documents and data, in accordance with their national legislation on data protection.

5.   The competent authorities shall not perform the action described in paragraph 2 in the case of a shipment of timber products derived from species listed in the Appendices to CITES, as these are covered by the provisions for verification set out in Council Regulation (EC) No 338/97 (4).

Article 6

FLEGT licences

1.   FLEGT licences shall be issued by the Licensing Authority as a means of attesting that timber products have been legally produced.

2.   FLEGT licences shall be provided on a form written in English and Vietnamese. The form shall be completed in English.

3.   The Parties may, by agreement, establish electronic systems for issuing, sending and receiving FLEGT licences.

4.   The technical specifications and the procedure for issuing FLEGT licences are set out in Annex IV.

Article 7

Definition of “legally produced timber”

For the purposes of this Agreement, a definition of “legally produced timber” is given in point (j) of Article 2 and specified in Annex II. That Annex describes Vietnamese legislation that must be complied with in order for timber products to be covered by a FLEGT licence. That Annex also includes documentation containing the principles, criteria, indicators and verifiers serving to prove compliance with such legislation.

Article 8

Verification of legally produced timber

1.   Viet Nam shall establish and implement a Viet Nam Timber Legality Assurance System (“VNTLAS”) to verify that timber and timber products have been legally produced and to ensure that only shipments verified as such are exported to the Union. The VNTLAS shall include compliance checks and procedures to ensure that timber of illegal or unknown origin does not enter the supply chain.

2.   The system for verifying that shipments of timber products have been legally produced is set out in Annex V.

Article 9

Release of shipments covered by a FLEGT licence

1.   The procedures governing the release for free circulation in the Union of shipments covered by a FLEGT licence are described in Annex III.

2.   Where the competent authorities have reasonable grounds to suspect that a licence is not valid or authentic or does not conform to the shipment it purports to cover, the competent authority concerned may apply the procedures described in Annex III.

3.   Where persistent disagreements or difficulties arise in consultations concerning FLEGT licences, the matter may be referred to the Joint Implementation Committee established pursuant to Article 18.

Article 10

Independent evaluation

1.   The purpose of the independent evaluation is to assess the implementation, effectiveness and credibility of the VNTLAS and the FLEGT licensing scheme, as set out in Annex VI.

2.   Viet Nam, in consultation with the Union, shall engage the services of the Independent Evaluator to implement the tasks set out in Annex VI.

3.   The Independent Evaluator shall be a body with no conflict of interest resulting from an organisational or commercial relationship with:

(a)

the Union or with the Vietnamese forestry sector regulatory authorities;

(b)

the Licensing Authority, or anybody given the responsibility of verifying the legality of timber production; or

(c)

any operator exercising a commercial activity in its forestry sector.

4.   The Independent Evaluator shall operate in accordance with a documented management structure, and with published policies, methods and procedures that correspond to internationally accepted best practices.

5.   The Independent Evaluator shall refer complaints arising from its work to the Joint Implementation Committee established pursuant to Article 18.

6.   The Independent Evaluator shall submit its observations to the Parties in reports in accordance with the procedure described in Annex VI. Reports by the Independent Evaluator shall be published in accordance with the procedure set out in Annex VIII.

7.   The Parties shall facilitate the work of the Independent Evaluator, ensuring in particular that it has access to the territory of each Party and to the information necessary for the performance of its functions. In accordance with their respective national legislation on data protection, the Parties may nonetheless refuse to disclose information that they are not permitted to communicate.

Article 11

Irregularities

The Parties shall inform each other in accordance with Article 20 if they suspect or have found evidence of any circumvention or irregularity in the FLEGT licensing scheme, including in relation to the following:

(a)

circumvention of trade, including by redirection of trade from Viet Nam to the Union via a third country, where there is reason to believe that this is done with the intention of avoiding licensing;

(b)

FLEGT licences covering timber products which contain timber from third countries that is suspected of being illegally produced; or

(c)

fraud in obtaining or using FLEGT licences.

Article 12

Date of operation of the FLEGT licensing scheme

1.   The Parties shall notify each other through the Joint Implementation Committee established pursuant to Article 18 when they consider that they have made the necessary preparations for the FLEGT licensing scheme to become fully operational.

2.   The Parties shall, through the Joint Implementation Committee, commission an independent assessment of the FLEGT licensing scheme on the basis of the criteria set out in Annex VII. The assessment shall determine whether the VNTLAS underpinning the FLEGT licensing scheme as described in Annex V adequately fulfils its functions.

3.   On the basis of the recommendations of the Joint Implementation Committee, the Parties shall agree on a date on which the FLEGT licensing scheme will start operating.

4.   The Parties shall notify each other in writing of this date.

Article 13

Application of the VNTLAS and other measures

1.   Using the VNTLAS, Viet Nam shall verify the legality of timber products exported to non-Union markets and timber products sold on domestic markets, and shall verify the legality of imported timber products using the system developed for implementing this Agreement.

2.   In support of the application of the VNTLAS, the Union shall encourage the use of the system with respect to trade in other international markets and with third countries.

3.   The Union shall implement measures to prevent the placing on the Union market of illegally harvested timber and products derived therefrom in accordance with its applicable legislation.

Article 14

Supporting measures

1.   The provision of any resources necessary for measures to support the implementation of this Agreement shall be determined in the context of the programming exercises of the Union and its Member States for cooperation with Viet Nam.

2.   Viet Nam shall ensure that its capacity to implement this Agreement is strengthened.

3.   The Parties shall ensure that activities associated with the implementation of this Agreement are coordinated with existing and future development programmes and initiatives.

Article 15

Stakeholder involvement in the implementation of this Agreement

1.   Viet Nam shall include relevant stakeholders in the implementation of this Agreement.

2.   Viet Nam shall ensure that the implementation and monitoring of this Agreement are done in a transparent manner together with relevant stakeholders, including non-governmental organisations, forest associations, enterprises, trade unions, local communities and people living in forest areas.

3.   Viet Nam shall ensure that a mechanism is in place to monitor the implementation of this Agreement, involving representatives of relevant Government agencies and other relevant stakeholders.

4.   Viet Nam shall hold regular consultations with stakeholders on the implementation of this Agreement and in that regard promote appropriate consultation strategies, modalities and programmes.

5.   The Union shall hold regular consultations with stakeholders on the implementation of this Agreement, taking into account its obligations under the United Nations Economic Commission for Europe Convention on Access to Information, Public Participation in Decision-making and Access to Justice in Environmental Matters of 1998 (“the Aarhus Convention”).

Article 16

Social safeguards

1.   In order to minimise possible adverse effects of this Agreement, the Parties agree to assess the impacts on ethnic minorities and local communities concerned and on their way of life, as well as on households and the timber industry.

2.   The Parties shall monitor the impacts of this Agreement as described in paragraph 1 while taking reasonable steps to mitigate any adverse effects. The Parties may agree on additional measures to address any adverse effects.

Article 17

Market incentives

Taking into account its international obligations, the Union shall promote a favourable position in the Union market for the timber products covered by this Agreement. Such efforts shall include in particular measures to support:

(a)

public and private procurement policies that recognise a supply of and ensure a market for legally harvested timber products; and

(b)

a more favourable perception of FLEGT-licensed products on the Union market.

Article 18

Joint Implementation Committee

1.   The Parties shall establish a Joint Implementation Committee (JIC) to facilitate the management, monitoring and review of this Agreement. The JIC shall also facilitate dialogue and exchanges of information between the Parties.

2.   The JIC shall be established within three months of the entry into force of this Agreement. Each Party shall designate its representatives to the JIC. The JIC shall make its decisions by consensus. The JIC shall be co-chaired by senior officials designated by each Party.

3.   The JIC shall establish its rules of procedure.

4.   The JIC shall meet at least twice a year in the first two years and once per year thereafter, on a date and with an agenda agreed in advance by the Parties. Additional meetings may be convened at the request of either of the Parties.

5.   The JIC shall ensure that its work is transparent and that information about its work and decisions are made available to the public.

6.   The JIC shall publish a joint annual report. The details and content to be included in that report are given in Annex VIII.

7.   The specific functions and tasks of the JIC are described in Annex IX.

Article 19

Reporting and public disclosure of information

1.   The Parties commit to regularly make available to the public information related to the implementation and monitoring of this Agreement.

2.   The Parties shall make information listed in Annex VIII publicly available in accordance with the mechanisms described in that Annex. The Parties shall endeavour to provide the various stakeholders associated with the forestry sector with reliable, relevant and up-to-date information.

3.   In accordance with their respective legislation, the Parties agree not to disclose confidential information exchanged under this Agreement. Neither Party shall disclose to the public, nor permit its authorities to disclose, information exchanged under this Agreement concerning trade secrets or confidential commercial information.

Article 20

Communication on implementation

1.   The representatives of the Parties responsible for official communications concerning the implementation of this Agreement shall be:

(a)

for Viet Nam: the Vice Minister, Ministry of Agriculture and Rural Development;

(b)

for the Union: the Head of the Delegation of the Union in Viet Nam.

2.   The Parties shall communicate to each other in a timely manner the information necessary for implementing this Agreement, including changes as regards the representatives mentioned in paragraph 1.

Article 21

Territorial application

This Agreement shall apply to the territory in which the Treaty on the Functioning of the European Union is applied under the conditions laid down in that Treaty, on the one hand, and to the territory of Viet Nam, on the other.

Article 22

Settlement of disputes

1.   The Parties shall seek to resolve any dispute concerning the application or interpretation of this Agreement through prompt consultations.

2.   If a dispute has not been settled by means of consultations within 120 days of the date of the initial request for consultations, the dispute may be referred to the JIC, which shall endeavour to settle it. The JIC shall be provided with all relevant information for an in-depth examination of the situation with a view to finding an acceptable solution. To that end, the JIC shall be required to examine all possibilities for maintaining the effective implementation of this Agreement.

3.   In the event that the JIC is unable to settle the dispute, the Parties shall jointly seek the good offices of, or request mediation by, a third party.

4.   If it is not possible to settle the dispute in accordance with paragraph 3, either Party may notify the other of the appointment of an arbitrator; the other Party shall then appoint a second arbitrator within 30 calendar days of the appointment of the first arbitrator. The Parties shall jointly appoint a third arbitrator within 60 days of the appointment of the second arbitrator.

5.   The arbitrators’ decisions shall be taken by majority vote within six months of the third arbitrator being appointed.

6.   The award shall be binding on the Parties and shall be without appeal.

7.   The JIC shall establish the working procedures for arbitration.

Article 23

Suspension

1.   A Party wishing to suspend this Agreement shall notify the other Party in writing of its intention to do so. The matter shall subsequently be discussed between the Parties, taking into consideration relevant stakeholders’ views.

2.   Either Party may suspend the application of this Agreement in the event that the other Party:

(a)

fails to fulfil its obligations under this Agreement;

(b)

fails to maintain the regulatory and administrative measures and means required to implement this Agreement; or

(c)

acts in a way that poses significant risks to the environment, health, safety or security of the people of the Union or of Viet Nam.

The decision on suspension and the reasons for that decision shall be notified and sent to the other Party in writing.

3.   The conditions of this Agreement shall cease to apply 30 calendar days after the notice referred to in the second subparagraph of paragraph 2 has been given.

4.   Application of this Agreement shall resume 30 calendar days after the Party that has suspended its application informs the other Party that the reasons for the suspension no longer apply.

Article 24

Amendments

1.   A Party wishing to amend this Agreement shall submit a proposal at least three months before the next meeting of the JIC. The JIC shall discuss the proposal and, if consensus is reached, shall make a recommendation. If the Parties agree with the recommendation, they shall approve it in accordance with their respective internal procedures.

2.   Any amendment approved by the Parties in accordance with paragraph 1 shall enter into force on the first day of the month following the date on which the Parties notify each other of the completion of the procedures necessary for that purpose.

3.   The JIC may adopt amendments to the Annexes to this Agreement.

4.   Notification of any amendment shall be made to the Secretary-General of the Council of the European Union and to the Minister for Foreign Affairs of the Socialist Republic of Viet Nam through diplomatic channels.

Article 25

Entry into force, duration and termination

1.   This Agreement shall enter into force on the first day of the month following the date on which the Parties notify each other in writing of the completion of their respective procedures necessary for that purpose.

2.   Notifications referred to in this Article shall be made to the Secretary-General of the Council of the European Union and to the Minister for Foreign Affairs of the Socialist Republic of Viet Nam through diplomatic channels.

3.   This Agreement shall remain in force for a period of five years. It shall be automatically extended for consecutive periods of five years, unless a Party renounces the extension by notifying the other Party in writing at least 12 months before this Agreement expires.

4.   Either Party may terminate this Agreement by notifying the other Party in writing. This Agreement shall cease to apply 12 months after the date of receipt of such notification.

Article 26

Annexes

The Annexes to this Agreement shall form an integral part of this Agreement.

Article 27

Authentic texts

This Agreement shall be drawn up in duplicate in the Bulgarian, Croatian, Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Italian, Latvian, Lithuanian, Maltese, Polish, Portuguese, Romanian, Slovak, Slovenian, Spanish, Swedish and Vietnamese languages, each text being equally authentic.

In the case of divergence of interpretation, the English text shall prevail.

IN WITNESS WHEREOF, the undersigned, being duly authorised thereto, have signed this Agreement.

Съставено в Брюксел на деветнадесети октомври две хиляди и осемнадесета година.

Hecho en Bruselas, el diecinueve de octubre de dos mil dieciocho.

V Bruselu dne devatenáctého října dva tisíce osmnáct.

Udfærdiget i Bruxelles den nittende oktober to tusind og atten.

Geschehen zu Brüssel am neunzehnten Oktober zweitausendachtzehn.

Kahe tuhande kaheksateistkümnenda aasta oktoobrikuu üheksateistkümnendal päeval Brüsselis.

Έγινε στις Βρυξέλλες, στις δέκα εννέα Οκτωβρίου δύο χιλιάδες δεκαοκτώ.

Done at Brussels on the nineteenth day of October in the year two thousand and eighteen.

Fait à Bruxelles, le dix neuf octobre deux mille dix-huit.

Sastavljeno u Bruxellesu devetnaestog listopada godine dvije tisuće osamnaeste.

Fatto a Bruxelles, addì diciannove ottobre duemiladiciotto.

Briselē, divi tūkstoši astoņpadsmitā gada deviņpadsmitajā oktobrī.

Priimta du tūkstančiai aštuonioliktų metų spalio devynioliktą dieną Briuselyje.

Kelt Brüsszelben, a kétezer-tizennyolcadik év október havának tizenkilencedik napján.

Magħmul fi Brussell, fid-dsatax-il jum ta’ Ottubru fis-sena elfejn u tmintax.

Gedaan te Brussel, negentien oktober tweeduizend achttien.

Sporządzono w Brukseli dnia dziewiętnastego października roku dwa tysiące osiemnastego.

Feito em Bruxelas, em dezanove de outubro de dois mil e dezoito.

Întocmit la Bruxelles la nouăsprezece octombrie două mii optsprezece.

V Bruseli devätnásteho októbra dvetisícosemnásť.

V Bruslju, dne devetnajstega oktobra leta dva tisoč osemnajst.

Tehty Brysselissä yhdeksäntenätoista päivänä lokakuuta vuonna kaksituhattakahdeksantoista.

Som skedde i Bryssel den nittonde oktober år tjugohundraarton.

Image 1

За Европейския съюз

Por la Unión Europea

Za Evropskou unii

For Den Europæiske Union

Für die Europäische Union

Euroopa Liidu nimel

Για την Ευρωπαϊκή Ένωση

For the European Union

Pour l'Union européenne

Za Europsku uniju

Per l'Unione europea

Eiropas Savienības vārdā –

Europos Sąjungos vardu

Az Európai Unió részéről

Għall-Unjoni Ewropea

Voor de Europese Unie

W imieniu Unii Europejskiej

Pela União Europeia

Pentru Uniunea Europeană

Za Európsku úniu

Za Evropsko unijo

Euroopan unionin puolesta

För Europeiska unionen

Image 2

Image 3

Image 4

За правителството на Социалистическа република Виетнам

Por el Gobierno de la República Socialista de Vietnam

Za vládu Vietnamské Socialistické Republiky

For Den Socialistiske Republik Vietnams regering

Für die Regierung der Sozialistischen Republik Vietnam

Vietnami Sotsialistliku Vabariigi valitsuse nimel

Για την Κυβέρνηση της Σοσιαλιστικής Δημοκρατίας του Βιετνάμ

For the Government of the Socialist Republic of Viet Nam

Pour le Gouvernement de la République socialiste du Viêt Nam

Za Vladu Socijalističke Republike Vijetnama

Per il governo della Repubblica socialista del Vietnam

Vjetnamas Sociālistiskās Republikas valdības vārdā –

Vietnamo Socialistinės Respublikos Vyriausybės vardu

A Vietnami Szocialista Köztársaság kormánya részéről

Għall-Gvern tar-Repubblika Soċjalista tal-Vjetnam

Voor de Regering van de Socialistische Republiek Vietnam

W imieniu Rządu Socjalistycznej Republiki Wietnamu

Pelo Governo da República Socialista do Vietname

Pentru Guvernul Republicii Socialiste Vietnam

Za vládu Vietnamskej socialistickej republiky

Za vlado Socialistične republike Vietnam

Vietnamin sosialistisen tasavallan hallituksen puolesta

För Socialistiska republiken Vietnams regering

Image 5

Image 6


(1)  Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ EU L 269, 10.10.2013, p. 1).

(2)  Commission Delegated Regulation (EU) 2015/2446 of 28 July 2015 supplementing Regulation (EU) No 952/2013 of the European Parliament and of the Council as regards detailed rules concerning certain provisions of the Union Customs Code (OJ EU L 343, 29.12.2015, p.1).

(3)  Council Regulation (EC) No 2173/2005 of 20 December 2005 on the establishment of a FLEGT licensing scheme for imports of timber into the European Community (OJ EU L 347, 30.12.2005, p. 1).

(4)  Council Regulation (EC) No 338/97 of 9 December 1996 on the protection of species of wild fauna and flora by regulating trade therein (OJ EC L 61, 3.3.1997, p. 1).


LIST OF ANNEXES

ANNEX I

:

Product coverage: the harmonised commodity codes for timber and timber products covered under the FLEGT licensing scheme

ANNEX II

:

Viet Nam Timber Legality Definition

ANNEX III

:

Conditions governing the release for free circulation in the Union of timber products exported from Viet Nam and covered by a FLEGT licence

ANNEX IV

:

FLEGT licensing scheme

ANNEX V

:

Viet Nam Timber Legality Assurance System (VNTLAS)

ANNEX VI

:

Terms of reference for the independent evaluation

ANNEX VII

:

Criteria for assessment of the operational readiness of the Viet Nam Timber Legality Assurance System

ANNEX VIII

:

Public disclosure of information

ANNEX IX

:

Functions of the Joint Implementation Committee


ANNEX I

PRODUCT COVERAGE: THE HARMONISED COMMODITY CODES FOR TIMBER AND TIMBER PRODUCTS COVERED UNDER THE FLEGT LICENSING SCHEME

The list in this Annex refers to the Harmonized Commodity Description and Coding System established by the International Convention on the Harmonized Commodity Description and Coding System of the World Customs Organization.

HS codes

Description

CHAPTER 44

Wood and articles of wood; wood charcoal

Ex. 4401

Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms; wood in chips or particles; sawdust and wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms (not from bamboo nor rattan).

4403

Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared

4406

Railway or tramway sleepers (cross-ties) of wood

4407

Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm.

Ex. 4408

Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm (not from bamboo nor rattan).

Ex. 4409

Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed (not from bamboo nor rattan).

Ex. 4410

Particle board, oriented strand board (OSB) and similar board (for example, waferboard) of wood or other ligneous materials, whether or not agglomerated with resins or other organic binding substances (not from bamboo nor rattan).

Ex. 4411

Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances (not from bamboo nor rattan).

Ex. 4412

Plywood, veneered panels and similar laminated wood (not from bamboo nor rattan).

Ex. 441300

Densified wood, in blocks, plates, strips or profile shapes (not from bamboo nor rattan).

Ex. 441400

Wooden frames for paintings, photographs, mirrors or similar objects (not from bamboo nor rattan).

Ex. 4415

Packing cases, boxes, crates, drums and similar packings, of wood; cable-drums of wood; pallets, box pallets and other load boards, of wood; pallet collars of wood (not from bamboo nor rattan).

Ex. 4416

Casks, barrels, vats, tubs and other coopers’ products and parts thereof, of wood, including staves (not from bamboo nor rattan).

Ex. 4418

Builders’ joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes (not from bamboo nor rattan).

CHAPTER 94

Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings

940330

– – Wooden furniture of a kind used in offices.

940340

– – Wooden furniture of a kind used in kitchens.

940350

– – Wooden furniture of a kind used in the bedroom.

940360

Other wooden furniture.


ANNEX II

VIET NAM TIMBER LEGALITY DEFINITION

INTRODUCTION

The Legality Definition (“LD”) sets out principles, criteria, indicators and verifiers for legal timber according to the laws and regulations of Viet Nam. The LD shall be updated as and when required during the implementation of this Agreement in accordance with the provisions of Article 24 of this Agreement. The LD forms an integral part of the Viet Nam Timber Legality Assurance System (“VNTLAS”) described in Annex V.

This Annex has been developed by a multi-sector working group through a comprehensive consultation process with government agencies, industry associations, enterprises, non-governmental organisations, households, individuals and local communities. The forms of consultation have included stakeholder workshops, online and written comments and contributions by organisations and individuals on drafts of the LD.

Vietnamese legal documents referred to in Appendices 1A and 1B to this Annex include laws and ordinances of the National Assembly, decrees of the Government, decisions of the Prime Minister, decisions of ministries and circulars of ministries which are publicly disclosed.

STRUCTURE AND CONTENT OF THE LEGALITY DEFINITION MATRIX

The LD is developed for two target groups, namely Organisations and Households, as defined in Section 2.2.1 of Annex V, to reflect compliance requirements of various regulations that apply to those two target groups and to design a clear, specific and feasible VNTLAS as described in Annex V.

The LD for Organisations is set out in Appendix 1A to this Annex and the LD for Households is set out in Appendix 1B to this Annex.

The LD is divided into seven principles, as follows:

1.   Organisations

Principle I: Harvesting of domestic timber complies with regulations on land use rights, forest use rights, management, environment and society.

Principle II: Compliance with regulations on handling confiscated timber.

Principle III: Compliance with regulations on importing timber.

Principle IV: Compliance with regulations on timber transportation and trade.

Principle V: Compliance with regulations on timber processing.

Principle VI: Compliance with regulations on customs procedures for export.

Principle VII: Compliance with regulations on tax and employees.

2.   Households

Principle I: Harvesting of domestic timber complies with regulations on land use rights, forest use rights, management, environment and society.

Principle II: Compliance with regulations on handling confiscated timber.

Principle III: Compliance with regulations on importing timber.

Principle IV: Compliance with regulations on timber transportation and trade.

Principle V: Compliance with regulations on timber processing.

Principle VI: Compliance with regulations on customs procedures for export.

Principle VII: Compliance with regulations on tax.

The LD for Organisations and the LD for Households consist of seven principles; however, under some principles the number of criteria, indicators and verifiers varies. In general, some of the regulations that apply to Households are simpler than those for Organisations. The most significant differences are reflected in Principle I, IV and VII, as follows:

Under Principle I (Harvesting of domestic timber complies with regulations on land use rights, forest use rights, management, environment and society), both the LD for Organisations and the LD for Households include eight criteria; however, some of the criteria vary between the two categories. The LD for Organisations includes Criterion 1 (Compliance with regulations on main harvesting of natural forest timber), but that Criterion is not applicable to Households. The LD for Households includes Criterion 7 (Compliance with regulations on harvesting timber from plantations in home gardens, farms and dispersed trees), but that Criterion is not applicable to Organisations (described further below).

Under Principle IV (Compliance with regulations on timber transportation and trade), the LD for Organisations includes 10 criteria and the LD for Households includes seven criteria. The additional criteria under the LD for Organisations, which are not applicable to Households, relate to compliance with regulations on business registration, and internal transportation of timber and timber products within a province and between provinces.

Under Principle VII, the LD for Organisations covers compliance with regulations on tax and employees (three criteria), while the LD for Households covers compliance with taxation regulations (one criterion). This reflects difference in the regulations on labour applied to Households as compared to Organisations.

In the LD and under the VNTLAS, there is a distinction between static and dynamic verifiers as defined in Section 4.1 of Annex V. Static verifiers (denoted “S” in the LD matrix) relate to the establishment and operations of Organisations and Households, including but not limited to verifiers such as business registration, forest land use rights, taxation and environmental and labour regulation. Dynamic verifiers (denoted “D” in the LD matrix) relate to batches of timber in the supply chain, including but not limited to verifiers such as timber packing lists and sales invoices, included in the timber product dossier at each stage of the supply chain.

EXPLANATION OF ELEMENTS OF THE LEGALITY DEFINITION

1.   Explanation of verifiers for land use rights and forest use rights

The Government of Viet Nam aims to ensure that conducive conditions are created whereby domestic timber growers can produce and sell their products. The LD therefore sets out a comprehensive and inclusive framework of verifiers on land use rights and forest use rights as described under Principle I. The number of verifiers varies according to the category of user (Organisations or Households) and the category of forest (criterion). In order to determine legal land use rights, Organisations and Households only need one of the verifiers which are specified in Principle I of the LD.

The main reason for including several verifiers for land use rights and forest use rights is the evolution of the land policy of Viet Nam in different periods. Verifiers on land use rights and forest use rights introduced under previous regulations may still be valid according to the Land Law of 2013.

Land use rights certificates (red book certificates) were first introduced through the Land Law of 1993. Since 1993, the issuance of land use rights certificates has been progressively extended to all land users and all categories of land throughout the country. That process is still underway and there are some circumstances in which legal forest land users have not yet been granted land use rights certificates. In this situation, a number of alternative verifiers may apply and can be used to demonstrate legal land use rights and legal forest use rights. Such alternative verifiers include: decisions on land allocation; decisions on forest allocation; decisions on forest land allocation; decisions on forest allocation combined with land allocation; decisions on land leasing; decisions on contracting forest land; forest registration books; and written confirmation from the Commune People’s Committee.

According to the Land Law of 2013, in cases where Households do not have land use rights certificates, or any other documentary evidence of land use rights, certification by the Commune People’s Committee that the land is currently used and is not subject to any dispute can be used as a verifier of legal land use.

2.   Harvesting timber from home gardens, farms and dispersed trees

The LD for Households does not include verifiers that regulate land use rights for trees harvested from home gardens, farms and dispersed trees, because those trees do not meet criteria of concentrated plantation forests, or are planted in areas that cannot be granted land use rights certificates, such as roadsides or canal banks.

When there is a need for harvesting, households submit, before exploitation, a report on the harvesting location, species and volume of timber harvested from their home gardens, farms and dispersed trees to the Commune People’s Committee for monitoring and controlling. After exploitation, households prepare and self-certify their timber packing list.

3.   Compliance with regulations on export

The procedure for FLEGT licensing for shipments of timber for export to markets of the Union takes place before customs procedures for export, as described in Annex IV. Therefore, Principle VI is used to classify Organisations under the Organisations Classification System (OCS) as specified in Annex V.

4.   Definitions

In the context of this Agreement, the following terms are understood as follows:

Principle

A principle is an area of Vietnamese law and legislation that Organisations and Households have to comply with at each stage of the supply chain as indicated in this Annex and Annex V.

Criterion

A criterion is a legal requirement for Organisations and Households to implement in order to assure compliance with a principle.

Indicator

An indicator is a specific measure, or set of measures, that Organisations and Households have to comply with to fulfil a criterion.

Verifier

A verifier is a piece of evidence to prove the fulfilment of an indicator and criterion.

Forest owner (forest title holder)

Forest owner refers to Organisations or Households that are assigned or leased forest land or forest by the Government for forestry-related production or business in accordance with the Law on Forest Protection and Development of 2004.

Harvesting design statement

The harvesting design statement is a document describing the basic situation of the harvesting area, harvesting techniques, harvesting and salvage volume, and categories and detailed tables on forest harvesting technical standards.

Design unit

A design unit is an entity authorised by a competent agency with the mandate to design forest harvesting operations.

Main harvesting

Main harvesting of timber of natural forests refers to the logging of timber for economic purposes while ensuring the stable development and use of forest determined in the scheme for sustainable forest management in accordance with the current regulations of Viet Nam. Main harvesting in natural forests is not applied to Households.

Tree marking list

The tree marking list is a document recording the name and size of the trees that can be felled in the harvesting design area.

Report on harvesting location and volume of harvested timber products

The report on harvesting location and volume of harvested timber products lists information on the harvested area and the harvested volume according to different categories of domestic timber source, including natural forest, planted forest, rubber wood and scattered trees.

Forest product packing list (“packing list”)

The forest product packing list is a mandatory document in the timber product dossier at each stage of the timber supply chain from the point of harvest or import to the point of export, including timber trade, entry and exit of each processing or storage sites, or transportation by one vehicle. A packing list is subject to check and verification/approval at each stage by the relevant entities.

The packing list for forest products in circulation includes information on the name and type of timber products, unit of measurement, form of the forest products, quantity and volume of forest products at the end of each page indicating the total quantity.

List of anticipated timber to be harvested

The list of anticipated timber to be harvested includes information on the location, species and quantity (volume and diameter) of products to be harvested.

Entry and exit books

Entry and exit books are used to record the entry to and exit from the facilities of forest products of the harvesting, processing and trading Organisations.

Unprocessed timber products

Unprocessed timber products are those not impacted by tools or equipment of any kind after being harvested, imported and handled (if confiscated) and still in their original shape and parameters.

Salvage harvesting and salvage collection

Salvage harvesting of timber means the harvesting of timber during the implementation of silvicultural measures, scientific research and site clearance for projects involving conversion of forest use purposes.

Salvage collection of timber means the collection of fallen or dead trees due to natural disaster; burnt, rotten or dry timber; and branches of timber remaining in forests.

Legal timber product dossier (“timber product dossier”)

The legal timber product dossier is a set of records related to timber products which are prepared, stored in the timber-product-producing and -trading Organisations and Households and circulated together with timber products in the process of harvesting, trading, transporting, processing, storing and exporting.

Production forest

Production forests are forests used mainly for the production and sale of timber and non-timber forest products, in combination with environmental protection.

Protection forest

Protection forests are forests used mainly for the protection of water sources and soil, the prevention of erosion and desertification, the restriction of natural disasters, climate regulation and environmental protection.

Special-use forest

Special-use forests are forests used mainly for nature conservation, the preservation of standard specimens of the national ecosystems and forest biological gene sources, scientific research, the protection of historical and cultural relics and landscape preservation for recreation and tourism purposes, in combination with environmental protection.


APPENDIX 1A

LEGALITY DEFINITION FOR ORGANISATIONS

PRINCIPLE I: HARVESTING OF DOMESTIC TIMBER COMPLIES WITH REGULATIONS ON LAND USE RIGHTS, FOREST USE RIGHTS, MANAGEMENT, ENVIRONMENT AND SOCIETY (ORGANISATIONS)

Criterion

Indicators

Verifiers

Type of verifier

S=static

D=dynamic

Legal references for verifiers

Criterion 1: Compliance with regulations on main harvesting of natural forest timber

Indicator 1.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

1.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

1.1.2.

Decision on forest allocation (from 15/10/1993 to 1/7/2004);

S

Articles 5, 13 and 14, Decree No. 02. CP; Articles 16 and 17, Decree No. 163/1999/ND-CP

 

1.1.3.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Article 102, Land Law 2013

 

1.1.4.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33 and 34, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

1.1.5.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

1.1.6.

Decision on forest allocation together with land allocation, land leasing (from 2011 to date);

S

Articles 5, 9 and 11, Circular No. 07/2011/TTLT-BNNPTNT-BTNMT

 

1.1.7.

Decision on forest allocation.

S

Section II, Circular No.38/2007/TT-BNN

Indicator 1.2: Having legal status harvesting forest – one of the following documents is required:

 

1.2.1.

Business registration certificate;

S

Articles 28 and 29, Enterprise Law 2014

 

1.2.2.

Investment registration certificate (for foreign investors or enterprise in which 51 % of charter capital is held by foreign investors);

S

Article 36, Investment Law 2014

 

1.2.3.

Business registration certificate (for enterprise operating in industry parks, export processing zones).

S

Article 39, Decree No.108/2006/ND-CP; Article 13, Investment Law 2005; Article 74, Investment Law 2014

Indicator 1.3: Having approved Sustainable Forest Management Plan – the following document is required:

 

1.3.1.

Decision on approving Sustainable Forest Management Plan.

S

Article 11, Circular No. 38/2014/TT-BNNPTNT

Indicator 1.4: Compliance with regulations on archiving harvesting documents – all the following documents are required:

 

1.4.1.

Harvesting design statement;

S

Article 22, Circular No. 87/2009/TT-BNNPTNT

 

1.4.2.

Map of harvesting area;

S

Article 21, Circular No. 87/2009/TT-BNNPTNT

 

1.4.3.

List of tree marked for harvesting;

S

Article 14, Circular No. 87/2009/TT-BNNPTNT

 

1.4.4.

Minutes on appraising harvesting design in the field;

S

Article 24, Circular No. 87/2009/TT-BNNPTNT

 

1.4.5.

Decision on approving harvesting design;

S

Article 25, Circular No. 87/2009/TT-BNNPTNT

 

1.4.6.

Harvesting permit;

S

Article 4, Circular No. 21/2016/TT-BNNPTNT

 

1.4.7.

Minutes of acceptance of harvested timber.

D

Article 4, Circular No. 21/2016/TT-BNNPTNT

Indicator 1.5: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm, forest hammer marks must be placed on the timber products – the following documents are required:

 

1.5.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

1.5.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 1.6: Timber harvested not subject to forest hammer marking as required in Indicator 1.5 – the following document is required:

 

1.6.1.

Packing list of timber.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 1.7: Harvesting forest complies with regulations on environmental protection – one of the following documents is required:

 

1.7.1.

Decision on approving environmental impact assessment report for projects harvesting in natural production forest involving clear-cut harvesting in concentration area at least 50 ha in size;

S

Article 12, Decree No. 18/2015/ND-CP

 

1.7.2.

Environmental protection plan for projects harvesting in natural production forest involving clear-cut harvesting in concentration area less than 50 ha in size.

S

Article 18, Decree No. 18/2015/ND-CP

Criterion 2: Compliance with regulations on main harvesting, salvage harvesting and salvage collection from planted protection forests

Indicator 2.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

2.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

2.1.2.

Decision on forest allocation (from 15/10/1993 to 1/7/2004);

S

Articles 5, 13 and 14, Decree No. 02. CP; Articles 9, 12 and 17, Decree No. 163/1999/ND-CP

 

2.1.3.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Article 102, Land Law 2013

 

2.1.4.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33, 34 and 35, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

2.1.5.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

2.1.6.

Decision on forest allocation together with land allocation, land leasing (from 2011 to date);

S

Articles 5, 9 and 11, Circular No. 07/2011/TTLT-BNNPTNT-BTNMT

 

2.1.7.

Decision on forest allocation.

S

Section II, Circular No. 38/2007/TT-BNN

Indicator 2.2: Having legal status for harvesting forest – one of the following documents is required:

 

2.2.1.

Business registration certificate;

S

Articles 28 and 29, Enterprise Law 2014

 

2.2.2.

Investment registration certificate (for foreign investors or enterprises in which 51 % of charter capital is held by foreign investors);

S

Article 36, Investment Law 2014

 

2.2.3.

Business registration certificate (for enterprise operating in industry parks, export processing zones).

S

Article 39, Decree No. 108/2006/ND-CP; Article 13, Investment Law 2005, Article 74, Investment Law 2014

Indicator 2.3: Harvesting forest complies with regulations on environmental protection – one of the following documents is required:

 

2.3.1.

Decision on approving environmental impact assessment report for projects on clear-cut harvesting for concentrated harvesting area of 200ha or more;

S

Article 12, Decree No. 18/2015/ND-CP

 

2.3.2.

Environmental protection plan for projects on clear-cut harvesting for concentrated harvesting area less than 200ha.

S

Article 18, Decree No. 18/2015/ND-CP

Indicator 2.4: Compliance with regulations on archiving harvesting documents – all the following documents are required:

 

2.4.1.

Harvesting design statement;

S

Article 6, Circular No. 21/2016/TT-BNNPTNT; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

2.4.2.

Map of harvesting area;

S

Article 6, Circular No. 21/2016/TT-BNNPTNT; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

2.4.3.

Harvesting permit.

S

Article 6, Circular No. 21/2016/TT-BNNPTNT; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 2.5: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from rare, precious and endangered timber species forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

2.5.1.

Minutes on placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

2.5.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 2.6: Timber harvested not subject to forest hammer marks as required in Indicator 2.5 – the following document is required:

 

2.6.1.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Criterion 3: Compliance with regulations on main harvesting, salvage harvesting and salvage collection from planted production forests

Indicator 3.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

3.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

3.1.2.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Article 102, Land Law 2013

 

3.1.3.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33 and 34, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

3.1.4.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

3.1.5.

Decision on land allocation, forest allocation (from 15/10/1993 to 1/7/2004);

S

Articles 5, 13 and 14, Decree No. 02. CP; Articles 9, 12 and 17, Decree No. 163/1999/ND-CP

 

3.1.6.

Decision on land allocation, land leasing (from 2011 to date).

S

Articles 5, 9 and 11, Circular No. 07/2011/TTLT-BNNPTNT-BTNMT

Indicator 3.2: Having legal status for harvesting forest – one of the following documents is required:

 

3.2.1.

Business registration certificate;

S

Articles 28 and 29, Enterprise Law 2014

 

3.2.2.

Investment registration certificate (for foreign investors or enterprises in which 51 % of charter capital is held by foreign investors);

S

Article 36, Investment Law 2014

 

3.2.3.

Business registration certificate (for enterprise operating in industry parks, export processing zones).

S

Article 39, Decree No. 108/2006/ND-CP; Article 13, Investment Law 2005, Article 74, Investment Law 2014

Indicator 3.3: Harvesting forest complies with legal regulations on environmental protection – one of the following documents is required:

 

3.3.1.

Decision on approving environmental impact assessment report for projects on clear-cut harvesting for concentrated harvesting area of 200ha or more;

S

Article 12, Decree No. 18/2015/ND-CP

 

3.3.2.

Environmental protection plan for projects on clear-cut harvesting for concentrated harvesting area less than 200ha.

S

Article 18, Decree No. 18/2015/ND-CP

Indicator 3.4: Compliance with regulations on archiving harvesting documents – the following document is required:

 

3.4.1.

Report on harvesting location and volume of harvested timber products.

S

Article 6(1b), Circular No. 21/2016/TT-BNNPTN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 3.5: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from rare, precious and endangered timber species forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

3.5.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

3.5.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 3.6: Timber harvested not subject to forest hammer marks as required in Indicator 3.5 – the following document is required:

 

3.6.1.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Criterion 4: Compliance with regulations on salvage harvesting of natural forested areas converted from forest land use to other land uses.

Indicator 4.1: Compliance with legal regulations on changing land use from forest use into other uses, environmental protection, site clearance – all the following documents are required:

 

4.1.1.

Decision on approving Measure on compensation for site clearance, including maps of converted forest area, status of converted forest;

S

Article 29, Decree No. 23/2006/ND-CP; Article 8 Circular No. 21/2016/TT-BNNPTNT

 

4.1.2.

Decision on allowing forest land conversion to other land uses;

S

Article 3, Resolution 49; Article 29, Decree No. 23/2006/ND-CP

 

4.1.3.

Decision on approving environmental assessment report or environmental protection plan;

 

 

 

4.1.3.1.

Decision on approving environmental assessment report for projects that change purposes for forest utility: 5ha or more for protection forests, special use forests; 10ha or more for natural forests; 50ha or more for other types of forests;

S

Article 29, Decree No. 23/2006/ND-CP; Article 12, Decree No. 18/2015/ND-CP

 

4.1.3.2.

Environmental protection plan for projects that change the purpose of land use of an area from forest use into other uses, for areas less than those specified in 4.1.3.1.

S

Article 18, Decree No. 18/2015/ND-CP

Indicator 4.2: Having legal status for harvesting forest – one of the following documents is required:

 

4.2.1.

Business registration certificate;

S

Articles 28 and 29, Enterprises Law 2014

 

4.2.2.

Investment registration certificate (for foreign investors or enterprises in which 51 % of charter capital is held by foreign investors);

S

Article 36, Investment Law 2014

 

4.2.3.

Business registration certificate (for enterprise operating in industry parks, export processing zones).

S

Article 39, Decree No. 108/2006/ND-CP; Article 13, Investment Law 2005, Article 74, Investment Law 2014

Indicator 4.3: Compliance with regulations on archiving harvesting documents – the following document is required:

 

4.3.1.

List of anticipated timber to be harvested.

S

Article 8, Circular No. 21/2016/TT-BNNPTNT

Indicator 4.4: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm, harvested in natural forests; and for round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from rare, precious and endangered timber species harvested in plantation forests forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

4.4.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

4.4.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 4.5: Timber harvested not subject to forest hammer marks as required in Indicator 4.4 – the following document is required:

 

4.5.1.

Packing list.

D

Articles 7 and 8 Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Criterion 5: Compliance with regulations on salvage harvesting of natural forest while implementing silvicultural measures, scientific research and training

Indicator 5.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

5.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

5.1.2.

Decision on land allocation, forest allocation (from 15/10/1993 to 1/7/2004);

S

Articles 5, 13 and 14, Decree No. 02. CP; Articles 9, 12 and 17, Decree No. 163/1999/ND-CP

 

5.1.3.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Article 102, Land Law 2013

 

5.1.4.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33, 34 and 35, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

5.1.5.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

5.1.6.

Decision on forest allocation together with land allocation, land leasing (from 2011 to date);

S

Articles 5, 9 and 11, Circular No. 07/2011/TTLT-BNNPTNT-BTNMT

 

5.1.7.

Decision on forest allocation.

S

Section II, Circular No. 38/2007/TT-BNN

Indicator 5.2: Having legal status for harvesting forest – one of the following documents is required:

 

5.2.1.

Business registration certificate;

S

Articles 28 and 29, Enterprise Law 2014

 

5.2.2.

Investment registration certificate (for foreign investors or enterprises in which 51 % of charter capital is held by foreign investors);

S

Article 36, Investment Law 2014

 

5.2.3.

Business registration certificate (for enterprise operating in industry parks, export processing zones).

S

Article 39, Decree No. 108/2006/ND-CP; Article 13, Investment Law 2005, Article 74, Investment Law 2014

Indicator 5.3: Compliance with legal regulations prior to be permitted for salvage harvesting – one of the following documents is required:

 

5.3.1.

Silviculture project;

S

Article 8, Circular No. 21/2016/TT-BNNPTNT

 

5.3.2.

Training plan;

S

Article 8, Circular No. 21/2016/TT-BNNPTNT

 

5.3.3.

Scientific research proposal.

S

Article 8, Circular No. 21/2016/TT-BNNPTNT

Indicator 5.4: Compliance with regulations on archiving harvesting documents – the following document is required:

 

5.4.1.

List of anticipated timber to be harvested.

S

Article 8, Circular No. 21/2016/TT-BNNPTNT

Indicator 5.5: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm, harvested in natural forests and for round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from rare, precious and endangered timber species harvested in plantation forests forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

5.5.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

5.5.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 5.6: Timber harvested not subject to forest hammer marks as required in Indicator 5.5 – the following document is required:

 

5.6.1.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Criterion 6: Compliance with regulations on salvage collection of stump, roots, branches in natural forests

Indicator 6.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

6.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

6.1.2.

Decision on forest allocation (from 15/10/1993 to 1/7/2004);

S

Articles 5, 13 and 14, Decree No. 02. CP; Articles 9, 12 and 17, Decree No. 163/1999/ND-CP

 

6.1.3.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Article 102, Land Law 2013

 

6.1.4.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33 and 34, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

6.1.5.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

6.1.6.

Decision on forest allocation together with land allocation and land leasing (from 2011 to date);

S

Articles 5, 9 and 11, Circular No. 07/2011/ TTLT-BNNPTNT-BTNMT

 

6.1.7.

Decision on forest allocation.

S

Section II, Circular No. 38/2007/TT-BNN

Indicator 6.2: Having legal status for harvesting forest – one of the following documents is required:

 

6.2.1.

Business registration certificate;

S

Articles 28 and 29, Enterprise Law 2014

 

6.2.2.

Investment registration certificate (for foreign investors or enterprises in which 51 % of charter capital is held by foreign investors);

S

Article 36, Investment Law 2014

 

6.2.3.

Business registration certificate (for enterprise operating in industry parks, export processing zones).

S

Article 39, Decree No. 108/2006/ND-CP; Article 13, Investment Law 2005, Article 74, Investment Law 2014

Indicator 6.3: Compliance with regulations on archiving harvesting documents – the following document is required:

 

6.3.1.

List of anticipated timber to be harvested.

S

Article 9, Circular No. 21/2016/TT-BNNPTNT

Indicator 6.4: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

6.4.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

6.4.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 6.5: Timber harvested not subject to forest hammer marks as required in Indicator 6.4 – the following document is required:

 

6.5.1.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Criterion 7: Compliance with regulations on salvage collection of stump, roots, branches in plantation forests

Indicator 7.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

7.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

7.1.2.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Article 102, Land Law 2013

 

7.1.3.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33 and 34, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

7.1.4.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

Indicator 7.2. Having legal status for harvesting forest – one of the following documents is required:

 

7.2.1.

Business registration certificate;

S

Articles 28 and 29, Enterprise Law 2014

 

7.2.2.

Investment registration certificate (for foreign investors or enterprises in which 51 % of charter capital is held by foreign investor);

S

Article 36, Investment Law 2014

 

7.2.3.

Business registration certificate (for enterprise operating in industry parks, export processing zones).

S

Article 39, Decree No. 108/2006/ND-CP; Article 13, Investment Law 2005, Article 74, Investment Law 2014

Indicator 7.3: Compliance with regulations on archiving harvesting documents – the following document is required:

 

7.3.1.

Report on harvesting location and volume of harvested timber products.

S

Article 6, Circular No. 21/2016/TT-BNNPTNT

Indicator 7.4: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from rare, precious and endangered timber species forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

7.4.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

7.4.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 7.5: Timber not subject to forest hammer marks as required in Indicator 7.4 – the following document is required:

 

7.5.1

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No.01/2012/TT-BNNPTNT

Criterion 8: Compliance with regulations on harvesting rubber wood

Indicator 8.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

8.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

8.1.2.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Article 102, Land Law 2013

 

8.1.3.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33 and 34, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

8.1.4.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

8.1.5.

Decision on land allocation (from 15/10/1993 to 1/7/2004);

S

Articles 5, 13 and 14, Decree No. 02. CP; Articles 9, 12 and 17, Decree No. 163/1999/ND-CP

 

8.1.6.

Decision on land allocation, land leasing (from 2011 to date).

S

Articles 5, 9 and 11, Circular No. 07/2011/TTLT-BNNPTNT-BTNMT

Indicator 8.2: Having legal status for harvesting forest – one of the following documents is required:

 

8.2.1.

Business registration certificate;

S

Articles 28 and 29, Enterprise Law 2014

 

8.2.2.

Investment registration certificate (for foreign investors or enterprises in which 51 % of charter capital is held by foreign investors);

S

Article 36, Investment Law 2014

 

8.2.3.

Business registration certificate (for enterprise operating in industry parks, export processing zones).

S

Article 39, Decree No. 108/2006/ND-CP; Article 13, Investment Law 2005, Article 74, Investment Law 2014

Indicator 8.3: Compliance with regulations on archiving harvesting documents – the following documents are required:

 

8.3.1.

Report on harvesting location and volume of harvested timber products;

D

Article 7, Circular No. 21/2016/TT-BNNPTNT

 

8.3.2.

Packing list.

D

Article 5, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2012/TT-BNNPTNT

PRINCIPLE II: COMPLIANCE WITH REGULATIONS ON HANDLING CONFISCATED TIMBER (ORGANISATIONS)

Criterion 1. Compliance with regulation on archiving documents of handled confiscated timber

Indicator 1.1: Compliance with regulations on handled confiscated timber – the following documents are required:

 

1.1.1.

Sales contract / contract on purchase and sale of property put up for auction;

S

Article 35, Decree No. 17/2010/ND-CP

 

1.1.2.

Certificates of ownership or use right of auctioned property;

S

Article 46, Decree No. 17/2010/ND-CP

 

1.1.3.

Invoice as required by the Ministry of Finance;

D

Article 16, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

1.1.4.

Packing list.

D

Article 16, Circular No. 01/2012/TT-BNNPTNT

Indicator 1.2: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm forest hammer marks must be placed on the timber products – the following document is required:

 

1.2.1.

Minutes of placing forest hammer marks.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN, Article 1, Decision No. 107/2007/QD-BNN

PRINCIPLE III: COMPLIANCE WITH REGULATIONS ON IMPORTING TIMBER (ORGANISATIONS)

Criterion 1: Compliance with regulations on customs procedures

Indicator 1.1: Compliance with legal regulations on custom procedures – the following documents are required:

 

1.1.1.

Declaration for imported timber products;

D

Article 24, Customs Law 2014; Article 25, Decree No.08/2015/ND-CP; Article 10, Circular No. 01/2012/TT-BNNPTNT; Article 16, Circular No. 38/2015/TT-BTC

 

1.1.2.

Sales contract or equivalent;

D

To be issued by VN Government

 

1.1.3.

Trading invoice in the case of commercial transaction;

D

Article 16, Circular No. 38/2015/TT-BTC

 

1.1.4.

Bill of lading (or other shipping document of equivalent value in accordance with legal regulations);

D

Article 16, Circular No. 38/2015/TT-BTC

 

1.1.5.

Packing list of imported forest products;

D

Article 10, Circular No. 01/2012/BNNPTNT

 

1.1.6.

Depending on timber sources of imported timber, one of the following verifiers is required:

 

 

 

1.1.6.1.

CITES permit of export country in the case of timber under Appendices I, II and III to CITES;

D

Decree No. 82/2006/ND-CP; Article 5, Decree No. 98/2011/ND-CP; Circular No. 04/2015/TT-BNNPTNT

 

1.1.6.2.

FLEGT licence;

D

To be issued by VN Government

 

1.1.6.3.

A self-declaration demonstrating due diligence on the legality of timber;

D

To be issued by VN Government

 

1.1.7.

Depending on the risk category (as specified in Table 2 of Annex V), one of the following verifiers shall be attached to a self-declaration:

 

 

 

1.1.7.1.

Voluntary certification or national certification schemes recognised by VNTLAS;

D

To be issued by VN Government

 

1.1.7.2.

Legal harvesting document in line with law and regulations of country of harvest (HS 4403, 4406, 4407);

D

To be issued by VN Government

 

1.1.7.3.

Alternative additional documentation demonstrating legality of timber in accordance with legislation of country of harvest (where the harvesting document is not required in the country of harvest for primary products, or importers cannot obtain harvesting document for complex products).

D

To be issued by VN Government

Criterion 2: Compliance with regulations on plant quarantine and forest hammer mark

Indicator 2.1: Compliance with regulations on plant quarantine for timber and timber products – the following document is required:

 

2.1.1.

Plant quarantine certificate for round timber, sawn timber, pallet, sawdust.

D

Article 1, Circular No. 30/2014/TT-BNNPTNT; Article 7, Circular No. 33/2014/TT-BNNPTNT

Indicator 2.2: Round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m must be marked with hammer marks or other special signs of exporting countries; otherwise, forest hammer marks must be placed in accordance with regulations – the following documents are required:

 

2.2.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

2.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

PRINCIPLE IV: COMPLIANCE WITH REGULATIONS ON TIMBER TRANSPORTATION AND TRADE (ORGANISATIONS)

Criterion 1. Compliance with regulations on enterprises establishment

Indicator 1.1: Obtained legal status – one of the following documents is required:

 

1.1.1.

Business registration certificate;

S

Articles 28 and 29, Enterprise Law 2014

 

1.1.2.

Investment registration certificate (for foreign investors or enterprises in which 51 % of charter capital is held by foreign investors);

S

Article 36, Investment Law 2014

 

1.1.3.

Business registration certificate (for enterprise operating in industry parks, export processing zones).

S

Article 39, Decree No. 108/2006/ND-CP; Article 13, Investment Law 2005, Article 74, Investment Law 2014

Criterion 2. Compliance with regulations on transporting, trading unprocessed timber from main harvesting, salvaged harvesting and salvaged collection from domestic natural forests

Indicator 2.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

2.1.1.

Invoice as required by the Ministry of Finance (if purchasing timber from organisations);

D

Article 12, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

2.1.2.

Packing list.

D

Article 12, Circular No. 01/2012/TT-BNNPTNT

Indicator 2.2: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm forest hammer marks must be placed – the following documents are required:

 

2.2.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

2.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

Criterion 3. Compliance with regulations on transporting, trading unprocessed timber harvested from concentrated plantation forests, home gardens, farms, scattered trees

Indicator 3.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

3.1.1.

Invoice as required by the Ministry of Finance (if purchasing timber from organisations);

D

Article 13, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

3.1.2.

Packing list.

D

Article 13, Circular No. 01/2012/TT-BNNPTNT

Indicator 3.2: For timber from rare, precious and endangered timber species harvested in plantation forests, and round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm, forest hammer marks must be placed, – the following documents are required:

 

3.2.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

3.2.2.

Packing list.

D

Article 13, Circular No. 01/2012/TT-BNNPTNT

Criterion 4. Compliance with regulations on transporting, trading imported timber and timber products that are not domestically processed

Indicator 4.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

4.1.1.

Invoice as required by Ministry of Finance;

D

Article 14, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

4.1.2.

Packing list.

D

Article 14, Circular No. 01/2012/TT-BNNPTNT

Indicator 4.2: Imported round timber with diameter of large end of ≥ 25 cm and length ≥ 1 m if there is no hammer mark or special signs of exporting countries, it must be placed with forest hammer marks – the following documents are required:

 

4.2.1.

Minutes on placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

4.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

Criterion 5. Compliance with regulations on transporting and trading unprocessed confiscated timber and timber products that have been handled

Indicator 5.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

5.1.1.

Invoice as required by Ministry of Finance (if purchasing timber from organisations);

D

Article 16, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

5.1.2.

Packing list.

D

Article 16, Circular No. 01/2012/TT-BNNPTNT

Indicator 5.2: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm forest hammer marks must be placed – the following documents are required:

 

5.2.1.

Minutes on placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

5.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

Criterion 6. Compliance with regulations on transporting and trading of processed timber and timber products (including round timber cross-cutting) from natural timber, imported timber and handled confiscated timber

Indicator 6.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

6.1.1.

Invoice as required by Ministry of Finance (if purchasing timber from Organisations);

D

Article 17, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

6.1.2.

Packing list.

D

Articles 17 and 26, Circular No. 01/2012/TT-BNNPTNT

Indicator 6.2: Round timber with a large end diameter ≥ 25 cm and length ≥ 1 m must be marked with forest hammer marks – the following documents are required:

 

6.2.1.

Minutes on placing forest hammer marks made;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

6.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

Criterion 7. Compliance with regulations on transporting and trading of processed timber and timber products (including round timber cross-cutting) from concentrated plantation forests, home gardens, scattered trees

Indicator 7.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

7.1.1.

Invoice as required by Ministry of Finance (if purchasing timber from Organisations);

D

Article 17, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

7.1.2.

Packing list.

D

Article 17, Circular No. 01/2012/TT-BNNPTNT

Indicator 7.2: Round timber with a large end diameter ≥ 25 cm and length ≥ 1 m must be marked with forest hammer marks – the following documents are required:

 

7.2.1.

Minutes on placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

7.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

Criterion 8. Compliance with regulations on internal transportation of timber and timber products within a province

Indicator 8.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

8.1.1.

Internal delivery bill;

D

Article 18, Circular No. 01/2012/TT-BNNPTNT

 

8.1.2.

Packing list.

D

Article 18, Circular No. 01/2012/TT-BNNPTNT

Indicator 8.2: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm, harvested in natural forests and for round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from rare, precious and endangered timber species harvested in plantation forests, forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

8.2.1.

Minutes on placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9 Circular No. 01/2012/TT-BNNPTNT

 

8.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Articles 7 and 9, Circular No. 01/2012/TT-BNNPTNT

Criterion 9. Compliance with regulations on internal transportation of timber and timber products between provinces

Indicator 9.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

9.1.1.

Internal delivery bill;

D

Article 18, Circular No. 01/2012/TT-BNNPTNT

 

9.1.2.

Packing list.

D

Article 18, Circular No. 01/2012/TT-BNNPTNT

Indicator 9.2: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm, harvested in natural forests, and for round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from rare, precious and endangered timber species harvested in plantation forests, forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

9.2.1.

Minutes on placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Articles 9, Circular No. 01/2012/TT-BNNPTNT

 

9.2.2.

Packing list.

D

Articles 7 and 9, Circular No. 01/2012/TT-BNNPTNT

Criterion 10. Compliance with regulations on timber product dossier for verification for export

Indicator 10.1: Compliance with regulations on legal timber product dossier for verification for export – the following documents are required:

 

10.1.1.

Sales contract or equivalent;

D

To be issued by VN Government

 

10.1.2

Invoice as required by Ministry of Finance;

D

Article 2, Circular No. 40/2015/TT-BNNPTNT

 

10.1.3.

Packing list of forest products for export;

D

Article 5, Circular No. 01/2012/TT-BNNPTNT

 

10.1.4.

One or more additional documents subject to specific stages of the supply chain of different timber sources (e.g. minutes of placing forest hammer marks) providing evidence of timber legality for such shipment.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

PRINCIPLE V: COMPLIANCE WITH REGULATIONS ON TIMBER PROCESSING (ORGANISATIONS)

Criterion 1: Compliance with regulations on enterprises establishment

Indicator 1.1: Having legal status – one of the following documents is required:

 

1.1.1.

Business registration certificate;

S

Article 28, Article 29 Enterprise Law 2014

 

1.1.2.

Investment registration certificate (for foreign investors or enterprises in which 51 % of charter capital is held by foreign investors);

S

Article 36, Investment Law 2014

 

1.1.3.

Investment registration certificate (for enterprise operating in industry parks, export processing zones).

S

Article 39, Decree No. 108/2006/ND-CP; Article 13, Investment Law 2005, Article 74, Investment Law 2014

Indicator 1.2: Processing of timber complies with regulations on environmental protection – one of the following documents is required:

 

1.2.1.

Decision on approving environmental impact assessment report for processing facilities of timber and woodchips from natural forests with capacity of 3 000 m3 product/year or more;

S

Article 12, Decree No. No. 18/2015/ND-CP

 

1.2.2.

Decision on approving environmental impact assessment report for plywood processing facilities with capacity of 100 000 m2 product/year or more;

S

Article 12, Decree No. 18/2015/ND-CP

 

1.2.3.

Decision on approving the environmental impact assessment report for furniture-producing facilities with total area of warehouses, factories of 10 000 m2 or more;

S

Article 12, Decree No. 18/2015/ND-CP

 

1.2.4.

Environmental protection plan by processing facilities for timber, plywood, particle board which are not subject to environmental impact assessment as regulated in Verifiers 1.2.1, 1.2.2 and 1.2.3 above.

S

Article 18, Decree No. 18/2015/ND-CP

Indicator 1.3: Compliance with regulations on fire prevention and firefighting – the following document is required:

 

1.3.1.

Approved design on fire prevention and firefighting.

S

Article 15 and Annex 4, Decree No. 79/2014/ND-CP

Indicator 1.4: Compliance with regulation on making monitoring entry and exit books – the following document is required:

 

1.4.1.

Monitoring entry and exit books.

S

Article 20, Circular No. 01/2012/TT-BNNPTNT

Criterion 2: Compliance with regulations on the legal origin of timber which are going to be processed

Indicator 2.1: Compliance with regulation on legal timber dossier for timber self-harvested from organisation’s forests – the following document is required:

 

2.1.1.

Packing list.

D

Article 20, Circular No. 01/2012/TT-BNNPTNT

Indicator 2.2: Compliance with regulation on legal timber dossier for timber purchased from organisations – the following documents are required:

 

2.2.1.

Invoice as required by the Ministry of Finance;

D

Article 20, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

2.2.2.

Packing list.

D

Article 20, Circular No. 01/2012/TT-BNNPTNT

Indicator 2.3: Compliance with regulation on legal timber dossier for timber purchased from households – the following document is required:

 

2.3.1.

Packing list.

D

Article 20, Circular No. 01/2012/TT-BNNPTNT

Indicator 2.4: For round timber with a large end diameter ≥ 25 cm and length of ≥ 1 m harvested in natural forests and timber from rare, precious and endangered timber species harvested from plantation forests, imported timber without hammer marks or special signs of the exporting countries, and handled confiscated timber, forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

2.4.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

2.4.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 2.5: For timber sawn or squared in forests and confiscated timber sawn which was handled but not further processed, having length of ≥ 1 m, thickness of ≥ 5 cm, width of ≥ 20 cm harvested in natural forests and timber from rare, precious and endangered timber species harvested from plantation forests forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

2.5.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT; Article 1, Decision No. 107/2007/QD-BNN

 

2.5.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT; Article 1, Decision No.107/2007/QD-BNN

PRINCIPLE VI: COMPLIANCE WITH REGULATIONS ON CUSTOMS PROCEDURES FOR EXPORT (ORGANISATIONS)

Criterion 1: Compliance with regulations on customs procedures

Indicator 1.1: Compliance with regulations on legal export dossier – the following documents are required:

 

1.1.1.

Customs clearance declaration for export timber products according to the applicable regulation (original);

D

Article 24, Law on Customs 2014; Article 25, Decree No. 08/2015/ND-CP; Article 16, Circular No. 38/2015/TT-BTC

 

1.1.2.

Sale contract or equivalent;

D

To be issued by VN Government

 

1.1.3

Invoice as required by Ministry of Finance;

D

To be issued by VN Government

 

1.1.4.

Packing list of forest products for export;

D

Article 5, Circular No. 01/2012/TT-BNNPTNT

 

1.1.5.

Permit of CITES MA of Viet Nam for products made from timber under Appendix II to CITES;

D

Article 8, Circular No. 04/2015/TT-BNNPTNT, Article 16, Circular No. 38/2015/TT-BTC

 

1.1.6.

FLEGT licence for EU market.

D

To be issued by VN Government

Criterion 2: Compliance with regulations on plant quarantine

Indicator 2.1: Compliance with regulations on plant quarantine for timber and timber products – the following document is required:

 

2.1.1.

Quarantine certificate for round timber, sawn timber, pallet, sawdust as required by importing country.

D

Articles 8 and 12, Decree No. 02/2007/ND-CP, Article 1, Circular No. 30/2014/TT-BNNPTNT, Article 10, Circular No. 33/2014/TT-BNNPTNT

PRINCIPLE VII: COMPLIANCE WITH REGULATIONS ON TAX AND EMPLOYEES (ORGANISATIONS)

Criterion 1: Compliance with regulations on tax

Indicator 1.1: Compliance with regulations on tax declaration, registration and payment:

 

1.1.1.

The organisation, person or business is not included in the public list of tax risk.

S

Article 70, Circular No. 156/2013/TT-BTC; Document 815/TCT-KK

Criterion 2: Compliance with Labour Code

Indicator 2.1: Labour contract between enterprises and employees:

 

2.1.1.

Their names are included on the payroll of the organisations.

S

Article 15, 16, 17 Labour Code 2012

Indicator 2.2: Employees are members of the enterprise’s trade union:

 

2.2.1.

Their names are included in the list of payment for trade union fee.

S

Article 5, Trade Union Law 2012

Indicator 2.3: Implementing regulations on labour safety and labour hygiene:

 

2.3.1.

Has labour hygiene plan made by the enterprise.

S

Article 148, Labour Code 2012

Criterion 3: Compliance with Social Insurance Law and Health Insurance Law

Indicator 3.1: Having social insurance books for employees whose labour contract duration is one month or more:

 

3.1.1.

Public information on social insurance contribution.

S

Articles 2 and 21, Social Insurance Law 2014

Indicator 3.2: Having health insurance for employees whose labour contract duration is three months or more:

 

3.2.1.

Payroll of the organisation to demonstrate the health insurance contribution.

S

Article 12, Health Insurance Law 2008; Article 1, Law on amending and supplementing a number of articles of the Health Insurance Law 2014

Indicator 3.3: Having unemployment insurance for employees whose contracts are for a full three months or more:

 

3.3.1.

Payroll of the organisation to demonstrate the payment of monthly unemployment insurance.

S

Article 52, Law on Employment 2013


APPENDIX 1B

LEGALITY DEFINITION FOR HOUSEHOLDS

PRINCIPLE I: HARVESTING OF DOMESTIC TIMBER COMPLIES WITH REGULATIONS ON LAND USE RIGHTS, FOREST USE RIGHTS, MANAGEMENT, ENVIRONMENT AND SOCIETY (HOUSEHOLDS)

Criterion

Indicators

Verifiers

Type of verifier

S=static

D=dynamic

Legal references for verifiers

Criterion 1: Compliance with regulations on main harvesting, salvage harvesting and salvage collection from planted protection forests

Indicator 1.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

1.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

1.1.2.

Decision on land allocation, forest allocation (from 15/10/1993 to 1/7/2004);

S

Articles 5, 13 and 14, Decree No. 02/ND-CP; Articles 9, 12 and 17, Decree No. 163/1999/ND-CP

 

1.1.3.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Articles 100 and 101, Land Law 2013

 

1.1.4.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33 and 34, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

1.1.5.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

1.1.6.

Decision on forest allocation together with land allocation, land leasing (from 2011 to date);

S

Articles 5, 9 and 11, Circular No. 07/2011/TTLT-BNNPTNT-BTNMT

 

1.1.7.

Decision on forest allocation;

S

Section II, Circular No. 38/2007/TT-BNN

 

1.1.8.

Forestry book;

S

Articles 5, 13 and 14, Decree No. 02/ND-CP

 

1.1.9.

One of the types of papers on land use rights as stipulated in Article 100 Land Law 2013;

S

Article 100, Land Law 2013

 

1.1.10.

Confirmation of the Commune People’s Committee that land is currently used and free to dispute subject to the cases regulated in Article 101 Land Law 2013;

S

Article 101, Land Law 2013

 

1.1.11.

Forest protection contracts with other holders.

S

Article 5, Decree No. 01/1995/ND-CP; Article 8, Decree No. 135/2005/ND-CP

Indicator 1.2: Harvesting forest complies with regulations on environmental protection as required by laws – one of the following documents is required:

 

1.2.1.

Decision on approving environmental impact assessment report for projects on clear-cut harvesting for concentrated harvesting area of 200ha or more;

S

Article 12, Decree No. 18/2015/ND-CP

 

1.2.2.

Environmental protection plan for projects on clear-cut harvesting for concentrated harvesting area less than 200ha.

S

Article 18, Decree No. 18/2015/ND-CP

Indicator 1.3: Compliance with regulations on archiving harvesting documents – the following documents are required:

 

1.3.1.

Harvesting design statement;

S

Article 6, Circular No. 21/2016/TT-BNNPTNT; Article 9, Circular No. 01/2012/TT-NNPTNT

 

1.3.2.

Map of harvesting area;

S

Article 6, Circular No. 21/2016/TT-BNNPTNT; Article 9, Circular No. 01/2012/TT-NNPTNT

 

1.3.3.

Harvesting permit.

S

Article 6, Circular No. 21/2016/TT-BNNPTNT; Article 9, Circular No. 01/2012/TT-NNPTNT

Indicator 1.4: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from rare, precious and endangered timber species, forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

1.4.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

1.4.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 1.5: Timber harvested not subject to place forest hammer marks as regulated in the Indicator 1.4 – the following document is required:

 

1.5.1.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Criterion 2: Compliance with regulations on main harvesting, salvage harvesting and salvage collection from planted production forests

Indicator 2.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

2.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

2.1.2.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Articles 100 and 101, Land Law 2013

 

2.1.3.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33 and 34, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

2.1.4.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

2.1.5.

Decision on land allocation, forest allocation (from 15/10/1993 to 1/7/2004);

S

Articles 5, 13 and 14, Decree No. 02/ND-CP; Articles 9, 12 and 17, Decree No. 163/1999/ND-CP

 

2.1.6.

Decision on land allocation, land leasing (from 2011 to date);

S

Articles 5, 9 and 11, Circular No. 07/2011/TTLT-BNNPTNT-BTNMT

 

2.1.7.

Forestry book;

S

Articles 5, 13 and 14, Decree No. 02/ND-CP

 

2.1.8.

One of the types of papers on land use rights as stipulated Article 100 Land Law 2013;

S

Article 100, Land Law 2013

 

2.1.9.

Confirmation of the Commune People’s Committee that land is currently used and free to dispute subject to the cases regulated in Article 101 Land Law 2013;

S

Article 101, Land Law 2013

 

2.1.10.

Forest protection contracts with other holders.

S

Article 5, Decree No. 01/1995/ND-CP; Article 8, Decree No. 135/2005/ND-CP

Indicator 2.2: Harvesting forest complies with regulations on environmental protection as required by laws – one of the following documents is required:

 

2.2.1.

Decision on approving environmental impact assessment report for projects on clear-cut harvesting for concentrated harvesting area of 200ha or more;

S

Article 12, Decree No. 18/2015/ND-CP

 

2.2.2.

Environmental protection plan for projects on clear-cut harvesting for concentrated harvesting area less than 200ha.

S

Article 18, Decree No. 18/2015/ND-CP

Indicator 2.3: Compliance with regulations on archiving harvesting documents – the following document is required:

 

2.3.1.

Report on harvesting location and volume.

S

Article 6, Circular No. 21/2016/TT-BNNPTNT; Article 9, Circular No. 01/2012/TT-NNPTNT;

Indicator 2.4: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from rare, precious and endangered timber species, forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

2.4.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

2.4.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 2.5: Timber harvested not subject to forest hammer marks as indicated in Indicator 2.4 – the following document is required:

 

2.5.1.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Criterion 3: Compliance with regulations on salvage harvesting on natural forest areas converted from forest land use to other land uses

Indicator 3.1: Compliance with legal regulations on changing land use from forest use into other uses, environmental protection, site clearance – all the following documents are required:

 

3.1.1.

Decision on approving measure on compensation for site clearance, including maps of converted forest area, status of converted forest;

S

Article 29, Decree No. 23/2006/ND-CP; Article 8, Circular No. 21/2016/TT-BNNPTNT

 

3.1.2.

Decision on allowing forest land conversion to other land uses;

S

Article 3, Resolution 49; Article 29, Decree No. 23/2006/ND-CP

 

3.1.3.

Decision on approving environmental assessment report or environmental protection plan:

 

 

 

3.1.3.1.

Decision on approving environmental assessment report for projects that change purposes of forest utility from 5ha or more for protection forests: from 10ha or more for natural forests; from 50ha or more for other types of forests;

S

Article 12, Decree No. 18/2015/ND-CP

 

3.1.3.2.

Environmental protection plan for projects that change purposes of the area less than area as specified in 4.1.3.

S

Article 18, Decree No. 18/2015/ND-CP

Indicator 3.2: Compliance with regulations on archiving harvesting documents – the following document is required:

 

3.2.1.

List of anticipated timber to be harvested.

S

Article 8, Circular No. 21/2016/TT-BNNPTNT

Indicator 3.3: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from rare, precious and endangered timber species forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

3.3.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

3.3.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 3.4: Timber harvested not subject to forest hammer marks as indicated in Indicator 3.3 – the following document is required:

 

3.4.1.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT;

Criterion 4: Compliance with regulations on salvage harvesting of natural forest while implementing silvicultural measures, scientific research and training

Indicator 4.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

4.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

4.1.2.

Decision on land allocation, forest allocation (from 15/10/1993 to 1/7/2004);

S

Articles 5, 13 and 14, Decree No. 02/ND-CP; Articles 9, 12 and 17, Decree No. 163/1999/ND-CP

 

4.1.3.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Articles 100 and 101, Land Law 2013

 

4.1.4.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33 and 34, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

4.1.5.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

4.1.6.

Decision on forest allocation together with land allocation, land leasing (from 2011 to date);

S

Articles 5, 9 and 11, Circular No. 07/2011/TTLT-BNNPTNT-BTNMT

 

4.1.7.

Decision on forest allocation;

S

Section II, Circular No. 38/2007/TT-BNN

 

4.1.8.

Forestry book;

S

Articles 5, 13 and 14, Decree No. 02/ND-CP

 

4.1.9.

One of the types of papers on land use rights as stipulated in Article 100 Land Law 2013;

S

Article 100, Land Law 2013

 

4.1.10.

Confirmation of the Commune People’s Committee that land is currently used and free to dispute subject to the cases regulated in Article 101 Land Law 2013;

S

Article 101, Land Law 2013

 

4.1.11.

Forest protection contracts with other holders.

S

Article 5, Decree No. 01/1995/ND-CP; Article 8, Decree No. 135/2005/ND-CP

Indicator 4.2: Compliance with legal regulations prior to be permitted for salvage harvesting – one of the following documents is required:

 

4.2.1.

Silviculture design dossier;

S

Article 8, Circular No. 21/2016/TT-BNNPTNT

 

4.2.2.

Training plan;

S

Article 8, Circular No. 21/2016/TT-BNNPTNT

 

4.2.3.

Scientific research proposal.

S

Article 8, Circular No. 21/2016/TT-BNNPTNT

Indicator 4.3: Compliance with regulations on archiving harvesting documents – the following document is required:

 

4.3.1.

List of anticipated timber to be harvested.

S

Article 8, Circular No. 21/2016/TT-BNNPTNT

Indicator 4.4: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm, forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

4.4.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

4.4.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT;

Indicator 4.5: Timber harvested not subject to forest hammer marks as indicated in Indicator 4.4 – the following document is required:

 

4.5.1.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT;

Criterion 5: Compliance with regulations on salvage collection of stump, roots, branches in natural forests

Indicator 5.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

5.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

5.1.2.

Decision on land allocation, forest allocation (from 15/10/1993 to 1/7/2004);

S

Articles 5, 13 and 14, Decree No. 02/ND-CP; Articles 9, 12 and 17, Decree No. 163/1999/ND-CP

 

5.1.3.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Articles 100 and 101, Land Law 2013

 

5.1.4.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33 and 34, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

5.1.5.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

5.1.6.

Decision on forest allocation together with land allocation, land leasing (from 2011 to date);

S

Articles 5, 9 and 11, Circular No. 07/2011/TTLT-BNNPTNT-BTNMT

 

5.1.7.

Decision on forest allocation;

S

Section II, Circular No. 38/2007/TT-BNN

 

5.1.8.

Forestry book;

S

Articles 5, 13 and 14, Decree No. 02/ND-CP

 

5.1.9.

One of the types of papers on land use rights as stipulated in Article 100 Land Law 2013;

S

Article 100, Land Law 2013

 

5.1.10.

Confirmation of the Commune People’s Committee that land is currently used and free to dispute subject to the cases regulated in Article 101 Land Law 2013;

S

Article 101, Land Law 2013

 

5.1.11.

Forest protection contracts with other holders.

S

Article 5, Decree No. 01/1995/ND-CP; Article 8, Decree No. 135/2005/ND-CP

Indicator 5.2: Compliance with regulations on archiving harvesting documents – the following document is required:

 

5.2.1.

List of anticipated timber to be harvested.

S

Article 9, Circular No. 21/2016/TT-BNNPTNT; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 5.3: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm, forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

5.3.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

5.3.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 5.4: Timber not subject to forest hammer marks as indicated in Indicator 5.3 – the following document is required:

 

5.4.1.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT;

Criterion 6: Compliance with regulations on salvage collection of stump, roots, branches in plantation forests

Indicator 6.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

6.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

6.1.2.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Articles 100 and 101, Land Law 2013

 

6.1.3.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33 and 34, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

6.1.4.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

6.1.5.

Decision on land allocation, forest allocation (from 15/10/1993 to 1/7/2004);

S

Articles 5, 13 and 14, Decree No. 02/ND-CP; Articles 9, 12 and 17, Decree No. 163/1999/ND-CP

 

6.1.6.

Decision on land allocation, land leasing (from 2011 to date);

S

Articles 5, 9 and 11, Circular No. 07/2011/TTLT-BNNPTNT-BTNMT

 

6.1.7.

Forestry book;

S

Articles 5, 13 and 14, Decree No. 02/ND-CP

 

6.1.8.

One of the types of papers on land use rights as stipulated Article 100 Land Law 2013;

S

Article 100, Land Law 2013

 

6.1.9.

Confirmation of the Commune People’s Committee that land is currently used and free to dispute subject to the cases regulated in Article 101 Land Law 2013;

S

Article 101, Land Law 2013

 

6.1.10.

Forest protection contracts with other holders.

S

Article 5, Decree No. 01/1995/ND-CP; Article 8, Decree No. 135/2005/ND-CP

Indicator 6.2: Compliance with regulations on archiving harvesting documents – the following document is required:

 

6.2.1.

Report on harvesting location and volume.

S

Article 6, Circular No. 21/2016/TT-BNNPTNT

Indicator 6.3: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from rare, precious and endangered timber species, forest hammer marks must be placed in compliance with regulations – the following documents are required:

 

6.3.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

6.3.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 6.4: Timber not subject to forest hammer marks as indicated in Indicator 7.3 – the following document is required:

 

6.4.1.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Criterion 7: Compliance with regulations on harvesting timber from plantations in home gardens, farms and dispersed trees

Indicator 7.1: Compliance with regulation on harvesting documents – the following document is required:

 

7.1.1.

Report on harvesting location and volume.

S

Article 7, Circular No. 21/2016/TT-BNNPTNT; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 7.2. For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm, harvested from plantation forest and timber from rare, precious and endangered timber species forest hammer marks must be placed in accordance with regulations – the following documents are required:

 

7.2.1.

Minutes on placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

7.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Indicator 7.3: Timber harvested are not subject to forest hammer marks as regulated in Indicator 7.2 – the following document is required:

 

7.3.1.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

Criterion 8: Compliance with regulations on harvesting rubber wood

Indicator 8.1: Compliance with legal regulations on land use right and forest use right – one of the following documents is required:

 

8.1.1.

Decision on land allocation (prior to 15/10/1993);

S

No specific legislation prior to 1993 on land allocation

 

8.1.2.

Land use right certificate (from 15/10/1993 to date);

S

Articles 48, 49 and 51, Land Law 2003; Articles 100 and 101, Land Law 2013

 

8.1.3.

Decision on land allocation (from 15/10/1993 to date);

S

Articles 32, 33 and 34, Land Law 2003; Articles 53, 54 and 55, Land Law 2013

 

8.1.4.

Decision on land leasing (from 15/10/1993 to date);

S

Article 35, Land Law 2003; Article 56, Land Law 2013

 

8.1.5.

One of the types of papers on land use rights as stipulated in Article 100 Land Law 2013;

S

Article 100, Land Law 2013

 

8.1.6.

Confirmation of the Commune People’s Committee that land is currently used and free to dispute subject to the cases regulated in Article 101 Land Law 2013.

S

Article 101, Land Law 2013

Indicator 8.2: Compliance with regulations on archiving harvesting documents – the following document is required:

 

8.2.1.

Report on harvesting location and volume;

D

Article 7, Circular No. 21/2016/TT-BNNPTNT

 

8.2.2.

Packing list.

D

Article 5, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2012/TT-BNNPTNT

PRINCIPLE II: COMPLIANCE WITH REGULATIONS ON HANDLING CONFISCATED TIMBER (HOUSEHOLDS)

Criterion 1. Compliance with regulation on archiving documents of handled confiscated timber

Indicator 1.1: Compliance with regulations on handled confiscated timber – the following documents are required:

 

1.1.1.

Sales contract/Contract on purchase and sale of property put up for auction;

S

Article 35, Decree No. 17/2010/ND-CP

 

1.1.2.

Certificates of ownership or use right of auctioned property;

S

Article 46, Decree No. 17/2010/ND-CP

 

1.1.3.

Invoice in compliance with regulation of Ministry of Finance;

D

Article 16, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

1.1.4.

Packing list.

D

Article 16, Circular No. 01/2012/TT-BNNPTNT;

Indicator 1.2: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm forest hammer marks must be placed on timber products – the following document is required:

 

1.2.1.

Minutes of placing forest hammer marks.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN, Article 1, Decision No. 107/2007/QD-BNN

PRINCIPLE III: COMPLIANCE WITH REGULATIONS ON IMPORTING TIMBER (HOUSEHOLDS)

Criterion 1: Compliance with regulations on customs procedures

Indicator 1.1: Compliance with legal regulations on custom procedures – the following documents are required:

 

1.1.1.

Declaration for imported timber products;

D

Article 24, Customs Law 2014; Article 25, Decree No. 08/2015/ND-CP; Article 10, Circular No. 01/2012/TT-BNNPTNT; Article 16, Circular No. 38/2015/TT-BTC

 

1.1.2.

Sales contract or equivalent;

D

To be issued by VN Government

 

1.1.3.

Trading invoice in the case of commercial transaction;

D

Article 16, Circular No. 38/2015/TT-BTC

 

1.1.4.

Bill of lading (or other shipping document of equivalent value in accordance with legal regulations);

D

Article 16, Circular No. 38/2015/TT-BTC

 

1.1.5.

Packing list of imported timber products;

D

Article 10, Circular No. 01/2012/BNNPTNT

 

1.1.6.

Depending on timber sources of imported timber, one of the following verifiers is required:

 

 

 

1.1.6.1.

CITES permit of export country in the case of timber under Appendices I, II and III to CITES;

D

Decree No. 82/2006/ND-CP; Article 5, Decree No. 98/2011/ND-CP; Circular No. 04/2015/TT-BNNPTNT

 

1.1.6.2.

FLEGT licence;

D

To be issued by VN Government

 

1.1.6.3.

A Self-declaration demonstrating due diligence on the legality of timber;

D

To be issued by VN Government

 

1.1.7.

Depending on the risk category (as specified in Table 2 of Annex V), one of the following verifiers shall be attached to a Self-declaration:

 

 

 

1.1.7.1.

Voluntary certification or national certification schemes recognised by VNTLAS;

D

To be issued by VN Government

 

1.1.7.2.

Legal harvesting document in line with law and regulations of country of harvest (HS 4403 , 4406 , 4407 );

D

To be issued by VN Government

 

1.1.7.3.

Alternative additional documentation demonstrating legality of timber in accordance with legislation of country of harvest (where the harvesting document is not required in the country of harvest for primary products, or importers cannot obtain harvesting document for complex products).

D

To be issued by VN Government

Criterion 2: Compliance with regulations on plant quarantine and forest hammer mark

Indicator 2.1: Compliance with regulations on plant quarantine for timber and timber products – the following document is required:

 

2.1.1.

Plant quarantine certificate for round timber, sawn timber, pallet, sawdust.

D

Article 1, Circular No. 30/2014/TT-BNNPTNT; Article 7, Circular No. 33/2014/TT-BNNPTNT

Indicator 2.2: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, hammer marks or other special signs of exporting countries must be placed; otherwise, forest hammer marks must be placed in accordance with regulations – the following documents are required:

 

2.2.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

2.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

PRINCIPLE IV: COMPLIANCE WITH REGULATIONS ON TIMBER TRANSPORTATION AND TRADE (HOUSEHOLDS)

Criterion 1. Compliance with regulations on transporting, trading unprocessed timber that are main harvesting, salvage harvesting and salvage collection from domestic natural forests

Indicator 1.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

1.1.1.

Invoice as required by the Ministry of Finance (in the case of purchasing timber from organisations);

D

Article 12, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

1.1.2.

Packing list.

D

Article 12, Circular No. 01/2012/TT-BNNPTNT

Indicator 1.2: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm forest hammer marks must be placed – the following documents are required:

 

1.2.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

1.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

Criterion 2. Compliance with regulations on transporting, trading unprocessed timber that are harvested from concentrated plantation forests, home gardens, farms, scattered trees

Indicator 2.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

2.1.1.

Invoice as required by the Ministry of Finance (if purchasing timber from organisations);

D

Article 13, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

2.1.2.

Packing list.

D

Article 13, Circular No. 01/2012/TT-BNNPTNT;

Indicator 2.2: For timber from rare, precious, and endangered timber species harvested in plantation forests, round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm from, forest hammer marks must be placed – the following documents are required:

 

2.2.1.

Minutes of placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

2.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

Criterion 3: Compliance with regulations on transporting and trading imported timber and timber products that are not domestically processed

Indicator 3.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

3.1.1.

Invoice as required by Ministry of Finance;

D

Article 14, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

3.1.2.

Packing list.

D

Article 14, Circular No. 01/2012/TT-BNNPTNT;

Indicator 3.2. For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m which is not marked with forest hammer marks or special sign of exporting countries Viet Nam forest hammer marks shall be placed – the following documents are required:

 

3.2.1.

Minutes on placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

3.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

Criterion 4: Compliance with regulations on transporting and trading unprocessed confiscated timber and timber products that have been handled

Indicator 4.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

4.1.1.

Invoice as required by Ministry of Finance (if purchasing timber from organisations);

D

Article 16, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

4.1.2.

Packing list.

D

Article 16, Circular No. 01/2012/TT-BNNPTNT;

Indicator 4.2: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m and timber sawn or squared in the forest with a length of ≥ 1 m, thickness of ≥ 5 cm and width of ≥ 20 cm forest hammer marks must be placed – the following documents are required:

 

4.2.1.

Minutes on placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

4.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

Criterion 5: Compliance with regulations on transporting and trading of processed timber and timber products (including round timber cross-cutting) from natural timber, imported timber and handled confiscated timber

Indicator 5.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

5.1.1.

Invoice as required by Ministry of Finance (if purchasing timber from Organisations);

D

Article 17, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

5.1.2.

Packing list.

D

Article 17, Circular No. 01/2012/TT-BNNPTNT

Indicator 5.2: Round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m must be marked with forest hammer marks – the following documents are required:

 

5.2.1.

Minutes on placing forest hammer marks made;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

5.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

Criterion 6: Compliance with regulations on transporting and trading of processed timber and timber products (including round timber cross-cutting) from concentrated plantation forests

Indicator 6.1: Compliance with regulations on legal timber product dossier – the following documents are required:

 

6.1.1.

Invoice as required by Ministry of Finance (if purchasing timber from Organisations);

D

Article 17, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

6.1.2.

Packing list.

D

Article 17, Circular No. 01/2012/TT-BNNPTNT

Indicator 6.2. Round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m must be marked with forest hammer marks – the following documents are required

 

6.2.1.

Minutes on placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

 

6.2.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN

Criterion 7. Compliance with regulations on timber product dossier for verification for export

Indicator 7.1: Compliance with regulations on legal timber product dossier for verification for export – the following documents are required:

 

7.1.1.

Sales contract or equivalent;

D

To be issued by VN Government

 

7.1.2.

Trading invoice;

D

Circular No. 38/2015/TT-BTC

 

7.1.3.

Packing list of forest products for export;

D

Article 5, Circular No. 01/2012/TT-BNNPTNT

 

7.1.4.

One or more additional documents subject to specific stages of the supply chain of different timber sources (e.g. minutes of placing forest hammer marks) providing evidences on timber legality for such shipment.

D

 

PRINCIPLE V: COMPLIANCE WITH REGULATIONS ON TIMBER PROCESSING (HOUSEHOLDS)

Criterion 1. Compliance with regulations on timber processing facilities

Indicator 1.1: Compliance with regulations on fire prevention and firefighting – the following document is required:

 

1.1.1.

Approved design on fire prevention and firefighting.

S

Article 15 and Annex 4, Decree No. 79/2014/ND-CP

Indicator 1.2: Compliance with regulation on safety and hygiene – the following is required:

 

1.2.1.

Rules on safety and hygiene are in place.

S

Labour Code 2012: Chapter IX, Clause 1 Article 137, Article 138, Labour Code 10/2012/QH 13

Criterion 2: Compliance with regulations on the legal origin of timber which are going to be processed

Indicator 2.1: Compliance with regulations on legal timber dossier for timber harvested from forests of Households – the following document is required:

 

2.1.1.

Packing list.

D

Article 20, Circular No. 01/2012/TT-BNNPTNT

Indicator 2.2: Compliance with regulations on legal timber dossier for timber purchased from Organisations – the following documents are required:

 

2.2.1.

Invoice as regulated by Ministry of Finance;

D

Article 20, Circular No. 01/2012/TT-BNNPTNT; Article 1, Circular No. 40/2015/TT-BNNPTNT

 

2.2.2.

Packing list.

D

Article 20, Circular No. 01/2012/TT-BNNPTNT, Article 1, Circular No. 40/2015/TT-BNNPTNT

Indicator 2.3: Compliance with regulations on legal timber dossier for timber purchased from Households – the following document is required:

 

2.3.1.

Packing list.

D

Article 20, Circular No. 01/2012/TT-BNNPTNT

Indicator 2.4: For round timber with a large end diameter of ≥ 25 cm and length of ≥ 1 m harvested in natural forests and timber from rare, precious and endangered timber species harvested in plantation forests, imported timber without forest hammer marks or special signs of exporting countries, and handled confiscated timber forest hammer marks must be placed – the following documents are required:

 

2.4.1.

Minutes on placing forest hammer marks;

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

 

2.4.2.

Packing list.

D

Articles 7 and 8, Decision No. 44/2006/QD-BNN; Article 9, Circular No. 01/2012/TT-BNNPTNT

PRINCIPLE VI: COMPLIANCE WITH REGULATIONS ON CUSTOMS PROCEDURES FOR EXPORT (HOUSEHOLDS)

Criterion 1: Compliance with regulations on customs procedures

Indicator 1.1: Compliance with regulations on legal export dossier – the following documents are required:

 

1.1.1.

Customs clearance declaration for export timber products according to the applicable regulation (original);

D

Article 24, Customs Law 2014; Article 25, Decree No. 08/2015/ND-CP; Article 16, Circular No. 38/2015/TT-BTC

 

1.1.2.

Sales contract or equivalent;

D

To be issued by VN Government

 

1.1.3.

Trading invoice (if export tax is imposed on the exported timber and timber products);

D

To be issued by VN Government

 

1.1.4.

Packing list;

D

Article 5, Circular No. 01/2012/TT-BNNPTNT

 

1.1.5.

Permit of CITES MA of Viet Nam for products made from timber which must be licensed under CITES;

D

Article 8, Circular No. 04/2015/TT-BNNPTNT; Article 16, Circular No. 38/2015/TT-BTC

 

1.1.6.

FLEGT licence for EU market.

D

To be issued by VN Government

Criterion 2: Compliance with regulations on plant quarantine

Indicator 2.1: Compliance with regulations on plant quarantine for timber and timber products – the following document is required:

 

2.1.1.

Quarantine certificate for round timber, sawn timber, Pallet, sawdust.

D

Article 1, Circular No. 30/2014/TT-BNNPTNT; Article 10, Circular No. 33/2014/TT-BNNPTNT

PRINCIPLE VII: COMPLIANCE WITH REGULATIONS ON TAX (HOUSEHOLDS)

Criterion 1: Compliance with regulations on tax

Indicator 1.1: Compliance with regulations on tax declaration, registration and payment:

 

1.1.1.

Organisations or persons, or business is not included in the public list of tax risk.

S

Article 70, Circular No. 156/2013/TT-BTC; Document 815/TCT-KK


ANNEX III

CONDITIONS GOVERNING THE RELEASE FOR FREE CIRCULATION IN THE UNION OF TIMBER PRODUCTS EXPORTED FROM VIET NAM AND COVERED BY A FLEGT LICENCE

I.   Lodging of the licence

1.

The licence shall be lodged with the competent authority of the Member State of the Union in which the shipment covered by that licence is declared for release for free circulation. This may be done electronically or by other expeditious means.

2.

The competent authorities referred to in point 1 shall, in accordance with the applicable national procedures, inform the customs authorities as soon as a licence has been accepted.

II.   Checks concerning the validity of licence documentation

1.

Paper licences shall conform to the model described in Annex IV. Any licence that does not meet the requirements and specifications set out in Annex IV shall be invalid.

2.

A licence shall be considered void if it is lodged on a date later than the expiry date indicated in the licence.

3.

Any erasures from or alterations to a licence shall not be accepted unless such erasures or alterations have been validated by the Licensing Authority.

4.

Extension of the validity of a licence shall not be accepted unless that extension has been validated by the Licensing Authority.

5.

A duplicate or replacement licence shall not be accepted unless it has been issued and validated by the Licensing Authority.

III.   Requests for additional information

1.

In the case of doubt concerning the validity or authenticity of a licence, a duplicate or a replacement licence, the competent authorities may request additional information from the Licensing Authority.

2.

A copy of the licence, the duplicate or the replacement licence in question may be forwarded together with the request.

3.

If necessary, the Licensing Authority shall withdraw the licence and issue a corrected copy, which shall be authenticated with the stamped endorsement “Duplicate” and forwarded to the competent authority.

IV.   Verification of the conformity of the licence with the shipment

1.

If further verification of the shipment is considered necessary before the competent authorities can decide whether a licence can be accepted, checks may be carried out to establish whether the shipment in question conforms to the information provided in the licence and to the records relating to the relevant licence which are held by the Licensing Authority.

2.

Where the volume or weight of the timber products contained in the shipment presented for release for free circulation does not deviate by more than 10 % from the volume or weight indicated in the corresponding licence, the shipment shall be considered to conform to the information provided in the licence as far as volume or weight is concerned.

3.

In the case of doubt about whether the shipment conforms with the FLEGT licence, the competent authority concerned may seek further clarification from the Licensing Authority.

4.

The Licensing Authority may request the competent authority to send a copy of the licence or the replacement in question.

5.

If necessary, the Licensing Authority shall withdraw the licence and issue a corrected copy, which shall be authenticated with the stamped endorsement “Duplicate” and forwarded to the competent authority.

6.

If the competent authority receives no answer within 21 calendar days of the request for further clarification, the competent authority shall not accept the licence and shall act in accordance with the applicable legislation and procedures.

7.

A licence shall not be accepted if it has been established, where necessary after provision of additional information in accordance with Section III or a further investigation in accordance with this Section, that the licence does not correspond to the shipment.

V.   Verification prior to the arrival of the shipment

1.

A licence may be lodged before the arrival of the shipment it covers.

2.

A licence shall be accepted if it meets all the requirements set out in Annex IV and no further verification in accordance with Sections III and IV of this Annex is deemed necessary.

VI.   Other matters

1.

Costs incurred while the verification is being completed shall be borne by the importer, except where the applicable legislation and procedures of the Member State of the Union concerned determine otherwise.

2.

Where persistent disagreements or difficulties arise from the verification of FLEGT licences, the matter may be referred to the Joint Implementation Committee.

VII.   Release for free circulation

1.

In box 44 of the Single Administrative Document on which the customs declaration for release for free circulation is made, reference shall be made to the number of the licence that covers the timber products subject to the declaration.

2.

Where the customs declaration is made by computerised means, the reference shall be provided in the appropriate box.

3.

Timber products shall be released for free circulation only after completion of the procedures described in this Annex.

ANNEX IV

FLEGT LICENSING SCHEME

1.   General requirements and provisions for FLEGT licences

1.1.

Any shipment of timber and timber products (hereinafter referred to as “timber products”) included in Annex I to this Agreement exported from Viet Nam to the Union market is required to have a FLEGT licence. In accordance with Regulation (EC) No 2173/2005 and this Agreement, the Union shall accept such shipments from Viet Nam for import into the Union only if they are covered by FLEGT licences.

1.2.

In accordance with point (f) of Article 2 of this Agreement, a FLEGT licence is a document issued by the Licensing Authority for a shipment of legally produced timber to be exported to the Union that is verified in accordance with the criteria and procedures laid down in this Agreement.

1.3.

A FLEGT licence shall be issued for a single shipment of a single exporter to a single point of entry into the Union. One single FLEGT licence should not be declared to more than one customs office in the Union.

1.4.

A FLEGT licence shall be issued before customs clearance in Viet Nam.

1.5.

A FLEGT licence may be in paper or electronic form. The licence form shall be made available by the Licensing Authority in English and Vietnamese, and the required information shall be provided in English. Both paper-based and electronic licences shall contain all information specified in the form and in accordance with the notes for guidance set out in the Appendix to this Annex.

1.6.

For complex shipments for which it may not be possible to include all required information referred to in Template 1 in the Appendix, an authorised attachment (additional goods description attached to the FLEGT licence) including qualitative and quantitative information related to the description of the shipment, as specified in Template 2 in the Appendix, must be added to the licence. In that case, the corresponding boxes in the licence shall not include information on the shipment but reference to the authorised attachment.

1.7.

In the future, in addition to FLEGT licensing for timber products exported to the Union market, Viet Nam may consider the application of a licensing scheme based on the VNTLAS for all export markets.

2.   Technical specifications with regard to paper-based FLEGT licences

2.1.

Paper-based licences shall conform to the form set out in the Appendix.

2.2.

The paper size shall be standard A4.

2.3.

A FLEGT licence shall be completed in typescript or by computerised means.

2.4.

The stamps of the Licensing Authority shall be applied by means of a stamp. However, an embossment or perforation may be substituted for the Licensing Authority stamp.

2.5.

The Licensing Authority shall use a tamper-proof method to ensure the authenticity of the FLEGT licence and to record the quantity allocated in such a way as to make it impossible to insert figures or references.

2.6.

The form shall not contain any erasures or alterations, unless those erasures or alterations have been authenticated by the stamp and signature of the Licensing Authority.

3.   Copies of FLEGT licences

3.1.

The Licensing Authority shall issue a single original FLEGT licence to the licence applicant, who shall send it to the importer.

3.2.

The importer shall lodge the original FLEGT licence with the competent authority of the Member State of the Union in which the shipment covered by that licence is declared for release for free circulation.

3.3.

Electronic copies of the FLEGT licence shall also be provided to the relevant Union customs authority and the competent authority.

3.4.

The Licensing Authority shall retain for its records and for possible future verification of licences issued an electronic copy of each FLEGT licence. A system shall be in place to ensure that the electronic database and the copies of the licences archived therein have legal value in accordance with provisions of the Law on E-transactions No. 51/2005/QH11.

3.5.

The release for free circulation of the shipment within the Union is subject to the provisions set out in Annex III.

4.   Licensing requirements for timber subject to the provisions of CITES

4.1.

Timber subject to the provisions of CITES, or products containing such timber that enter the supply chain in Viet Nam, are subject to the same VNTLAS verification as other timber.

4.2.

Before export, the CITES Management Authority of Viet Nam shall ensure that timber subject to the provisions of CITES or products containing such timber meet all VNTLAS requirements.

4.3.

The CITES Management Authority of Viet Nam shall issue CITES permits for shipments into the Union containing only timber that is subject to the provisions of CITES or products containing such timber. Such timber products shall be exempted from the requirement to obtain a FLEGT licence.

5.   Licensing procedures

5.1.   Licensing Authority

The Licensing Authority shall be the CITES Management Authority of Viet Nam.

The Licensing Authority is responsible for storing relevant data and information on the issuance of FLEGT licences and for information exchange between Viet Nam and the competent authorities in the Member States of the Union as well as other competent Vietnamese authorities or licensees on FLEGT licence-related issues.

The detailed requirements and procedures for the issuance, extension of the validity, withdrawal, replacement and management of FLEGT licences shall be regulated by the Government of Viet Nam by means of legislation after the signing of this Agreement. The FLEGT licensing procedures shall be made public.

The Government of Viet Nam shall provide the Union and its Member States with authenticated sample licences, specimens of stamps of the Licensing Authority, and signatures of the authorised officers.

The Licensing Authority shall establish systems to receive both hard-copy and electronic licence registrations in order to respond to the capacity and location of export operators. The FLEGT licensing system will be progressively linked to the National Single Window system of Viet Nam as conditions allow for development of the systems.

In line with the definition of “goods of a non-commercial nature” included in point 21 of Article 1 of Delegated Regulation (EU) 2015/2446, samples and demonstration products for commercial purposes are subject to the FLEGT licensing scheme when exported to the Union market.

5.2.   Timber product dossier for FLEGT licensing

The timber product dossier for FLEGT licensing for exporters consists of the following five elements:

1.

FLEGT licence application;

2.

sales contract or equivalent;

3.

timber packing list;

4.

invoice as required by the Ministry of Finance;

5.

one or more additional documents subject to specific stages of the supply chain of different timber sources (e.g. minutes of placing forest hammer marks) providing evidence of timber legality for such shipment as defined in Appendix 2 to Annex V.

The content of the timber product dossier for FLEGT licensing, including any specific requirements for samples and demonstration products, shall be specified in the regulation on FLEGT licensing to be issued by the Government of Viet Nam after the signing of this Agreement.

5.3.   Licensing steps

The licensing steps are illustrated in Figure 1.

Step 1: Application receipt

The applicant exporting timber to the Union submits the timber product dossier for FLEGT licensing to the Licensing Authority for each export shipment. The content of the dossier is specified in Section 2.1.

Step 2: Application review

The Licensing Authority shall conduct the following steps:

(a)

In the case of Organisations, confirm the risk category status in the Organisation Classification System (OCS) database, as set out in Annex V, in order to ensure the accuracy of the risk category declared by the exporter in the timber export dossier and that the packing list has been duly certified in line with the risk category status of the Organisation.

Figure 1: FLEGT licensing procedure

Image 7

Text of image

(b)

Check the completeness of the submitted timber product dossier for FLEGT licensing of Organisations and Households according to requirements as described in Section 2.1. In cases where the documentation is not complete, the Licensing Authority shall not process the timber product dossier. The Licensing Authority shall inform the exporter about any additional information or documentation that may be required.

(c)

Check the legality and validity of documents included in the timber product dossier for FLEGT licensing. In the case of suspicion of risk, the Licensing Authority shall coordinate with the Verification Authority and other verification entities for further checks and clarification of the legality of the shipment.

Step 3: Licensing decision

In cases where the timber product dossier is deemed compliant with VNTLAS requirements, the Licensing Authority shall issue the FLEGT licence for the shipment.

In cases where the timber product dossier is not compliant with VNTLAS requirements, the Licensing Authority shall reject the FLEGT licence application for the shipment and shall take action in line with applicable legislation in the case of any detected violation.

6.   Validity, withdrawal and replacement of FLEGT licences

6.1.   Validity and extension of validity of FLEGT licences

A FLEGT licence shall be valid from the date on which it is issued.

The period of validity of a FLEGT licence shall not exceed six months. The date of expiry shall be indicated on the licence.

After the date of expiry of the licence, the validity of the licence may be extended once for another period of a maximum of two months by the Licensing Authority. In cases where an extension of the validity of the licence is required, applicants shall submit a written request to the Licensing Authority together with any explanation on the request to extend the validity of the licence. Upon such extension, the Licensing Authority shall insert and validate the new expiry date in the licence.

6.2.   Withdrawal of FLEGT licences

The FLEGT licence shall be withdrawn in the following situations:

any violation of the exporter related to the shipment is identified after the licence has been issued;

the FLEGT licence expires without the export of timber products having taken place and without the request for an extension of the validity of the licence;

the exporter voluntarily returns the licence.

6.3.   Replacement of FLEGT licences

A FLEGT licence may be replaced in the following situations:

the FLEGT licence is lost, stolen or destroyed;

the FLEGT licence contains mistakes by the Licensing Authority;

In the event of loss, theft or destruction of the original FLEGT licence, the licensee or the licensee’s authorised representative may apply to the Licensing Authority for a replacement. Together with the application, the licensee or the licensee’s authorised representative shall provide an explanation for the loss, theft or destruction of the original licence.

The replacement shall contain the information and entries that appeared on the licence it replaces, including the licence number, and shall bear the stamped endorsement “Replacement Licence”.

In the event that the lost or stolen licence is retrieved, it shall not be used and shall be returned to the Licensing Authority.

For licences containing mistakes by the Licensing Authority, the Licensing Authority shall withdraw the FLEGT licence and issue a corrected licence, which shall be authenticated with the stamped endorsement “Duplicate” and forwarded to the competent authority.

The replacement original licence and any copies for the Union customs authority and the competent authority shall contain the information included in the original licence, including the original licence number and the date of issue of the replaced licence.

6.4.   FLEGT licence re-application

A new FLEGT licence shall be requested by the exporter whenever there is a change in the timber product, HS code, species or number of units, or any deviation in the weight and/or volume of the shipment by more than 10 % in comparison with the FLEGT licence.

7.   Management of violations related to FLEGT licensing

In the event of (a) any violation or fraudulent information related to the timber product dossier for FLEGT licensing, or (b) counterfeiting, altering or modifying information in the licence or infringement of the licensing regulations, administrative or legal measures shall apply according to the level of violation, in accordance with Vietnamese law and regulations.

8.   Responsibility of the Licensing Authority

The FLEGT licence shall be issued to the exporter in line with relevant provisions of this Agreement.

In any case concerning the extension of the validity, withdrawal or replacement of the FLEGT licence, the Licensing Authority shall inform the competent authority concerned.

The Licensing Authority is responsible for responding to any questions from the competent authorities, as well as other authorities of Viet Nam, if there is doubt concerning the authenticity and validity of any licence, and providing additional information and clarification as requested.

The Licensing Authority shall manage a licensing database for the applications received, including FLEGT licences issued and applications rejected.


APPENDIX

FLEGT LICENCE FORM

Template 1: FLEGT licence form

Image 8

Text of image

Template 2: Form for the authorised attachment

Image 9

Text of image

Notes for guidance on FLEGT licence

General:

Complete in capitals.

ISO codes, where indicated, refer to the international standard two-letter code for any country.

Box 2 is for use by the Vietnamese authorities only.

Box

Specification

Meaning

1

Issuing authority

Indicate the full name and address of the Licensing Authority.

2

Information for use by Viet Nam: Importer

Indicate the full name and address of the importer.

3

FLEGT licence number

Indicate clearly the licence number in the required format.

4

Date of expiry

Indicate clearly the expiry date of licence.

5

Country of export

This refers to the partner country from where the timber products were exported to the Union.

6

ISO code

Indicate the two-letter code for the partner country referred to in Box 5.

7

Means of transport

Indicate the means of transport at the point of export.

8

Licensee

Indicate the name and address of the exporter.

9

Commercial description of timber products

Indicate the commercial description of the timber product(s).

10

HS heading and description

Give the four-digit or the six-digit commodity code established pursuant to the Harmonised Commodity Description and Coding System.

11

Common and scientific names

Indicate the common and scientific names of the species of timber used in the product. Where more than one species is included in a composite product, use a separate line. May be omitted for a composite product or component that contains multiple species whose identity has been lost (e.g. particle board).

12

Countries of harvest

Indicate the countries where the species of timber referred to in Box 10 was harvested. For a composite product, include for all sources of wood used. May be omitted for a composite product or component that contains multiple species whose identity has been lost (e.g. particle board).

13

ISO code

Indicate the ISO code of the countries referred to in box 12. May be omitted for a composite product or component that contains multiple species whose identity has been lost (e.g. particle board).

14

Volume

Give the overall volume in m3. May be omitted unless the information referred to in box 15 has been omitted.

15

Net weight

Give the overall weight in kg. This is defined as the net mass of the timber products without immediate containers or any packaging, other than bearers, spacers, stickers etc. May be omitted unless the information referred to in box 14 has been omitted.

16

Number of units

Indicate the number of units, where a manufactured product is best quantified in this way. May be omitted.

17

Distinguishing marks

Indicate any distinguishing marks where appropriate (e.g. lot number, bill of lading number). May be omitted.

18

Signature and stamp of issuing authority

The box shall be signed by the authorised official and stamped with the official stamp of the licensing authority. The place and data shall also be indicated.


ANNEX V

VIET NAM TIMBER LEGALITY ASSURANCE SYSTEM

(VNTLAS)

TABLE OF CONTENTS

1.

INTRODUCTION 79

2.

SCOPE OF APPLICATION 79

2.1

Timber sources 79

2.1.1

Timber sources controlled by the VNTLAS 79

2.1.2

Timber in transit 80

2.2

Scope of control 80

2.2.1

Definition of Organisations and Households 81

2.2.2

Definition of government agencies 81

2.2.3

Definition of Verification Authority and verification entities 81

2.3

Recognition by the VNTLAS of voluntary certification and national certification schemes 81

3.

LEGALITY DEFINITION 82

3.1

Structure and content of the Legality Definition 82

4.

DEVELOPMENT, VERIFICATION AND APPROVAL OF VERIFIERS AT ALL STAGES OF THE SUPPLY CHAIN 84

4.1

Definition of verifiers 84

4.1.1

Static verifiers 84

4.1.2

Dynamic verifiers 85

4.2

Development of verifiers 85

4.3

Verification and approval/certification of verifiers 85

4.4

Responsibilities of relevant actors 86

4.4.1

Responsibilities of Organisations 86

4.4.2

Responsibilities of Households 86

4.4.3

Responsibilities of government agencies 86

5.

ORGANISATION CLASSIFICATION SYSTEM AND RISK-BASED VERIFICATION 86

5.1

Purpose of the Organisation Classification System 86

5.2

Criteria and risk categories 87

5.3

Implementation of the Organisation Classification System 87

5.3.1

Self-assessment and appraisal procedures and frequency 89

5.3.2

Classification results 89

5.4

Responsibilities of relevant actors 90

5.4.1

Responsibilities of Organisations 90

5.4.2

Responsibilities of government agencies 90

6.

SUPPLY CHAIN CONTROL 90

6.1

Overview 90

6.2

Critical control points in the VNTLAS supply chain 91

6.3

Verification of timber sources entering the VNTLAS 92

6.3.1

Timber from main harvesting of domestic natural forest (critical control point 1a) 92

6.3.2

Timber from planted production and protection forests (critical control points 1c and 1d) 92

6.3.3

Timber from salvage harvesting and salvage collection (critical control points 1b, 1c and 1d) 92

6.3.4

Timber from home gardens, farms and dispersed trees (critical control point 1e(2)) 93

6.3.5

Rubber wood from domestic sources (critical control points 1e(1) and 1e(2)) 93

6.3.6

Handled confiscated timber (critical control point 1f) 93

6.3.7

Imported timber (critical control point 1g) 94

6.3.7.1

Due diligence and self-declaration requirements for importers 94

6.3.7.2

Handling of violations 95

6.3.7.3

Customs risk assessment system 95

6.3.7.4

Species risk categories 96

6.3.7.5

Risk associated with geographic origin of imported timber 97

6.3.7.6

Risk-based control and management of imported timber 97

6.4

Verification of timber at stages in the VNTLAS supply chain 100

6.5

Supply chain reporting requirements 100

6.6

Responsibilities of relevant actors 100

6.6.1

Responsibilities of Organisations and Households 100

6.6.2

Responsibilities of government agencies 100

7.

VERIFICATION FOR EXPORT 101

7.1

General principles for the verification for export 101

7.1.1

Verification for export for Category 1 Organisations 102

7.1.2

Verification for export for Category 2 Organisations 105

7.1.3

Verification for export for Households/individuals 106

7.2

Suspicion of risk and physical checks 107

8.

FLEGT LICENSING 107

9.

INTERNAL INSPECTION, COMPLAINTS AND FEEDBACK MECHANISMS 108

9.1

Internal inspection 108

9.2

Complaints, denunciations and feedback mechanisms 108

10.

INDEPENDENT EVALUATION 108

11.

MANAGEMENT OF VIOLATIONS 109

11.1

Management of violations 109

11.2

Record of violations 109

11.2.1

Database of violations of the Law on Forest Protection and Development 109

11.2.2

Databases of violations of other government agencies 109

12.

DATA MANAGEMENT AND STORAGE 109

12.1

VNTLAS databases 109

12.2

Data-management and storage responsibilities 110

12.2.1

Responsibilities of Organisations and Households 110

12.2.2

Responsibilities of the Provincial FPD 110

12.2.3

Responsibilities of other local government agencies 110

12.2.4

Responsibilities of the Central FPD 110

12.2.5

Responsibilities of the Licensing Authority 111

12.2.6

Responsibilities of other central government agencies 111

13.

INSTITUTIONAL DEVELOPMENT FOR VNTLAS IMPLEMENTATION 111

14.

JOINT IMPLEMENTATION COMMITTEE 111

APPENDIX 1A

Development, verification and approval of legality verifiers for Organisations 113

APPENDIX 1B

Development, verification and approval of legality verifiers for Households 146

APPENDIX 2

Supply chain control 172

APPENDIX 3

Standard form for self-declaration of imported timber sources 189

Acronyms

 

EU

European Union

FPD

Forest Protection Department

M/GTC

General Department of Customs (under Ministry of Finance)

MOF/GDT

General Department of Tax (under Ministry of Finance)

LD

Legality Definition

MARD

Ministry of Agriculture and Rural Development

MOF

Ministry of Finance

MOIT

Ministry of Industry and Trade

MOLISA

Ministry of Labour, Invalids and Social Affairs

MONRE

Ministry of Natural Resources and Environment

MPI

Ministry of Planning and Investment

OCS

Organisation Classification System

VPA

Voluntary Partnership Agreement

VNFOREST

Viet Nam Administration of Forestry

VNTLAS

Viet Nam Timber Legality Assurance System

1.   INTRODUCTION

The Viet Nam Timber Legality Assurance System (“VNTLAS”) aims to ensure that timber and timber products as described in Annex I (hereinafter referred to as “timber”) are legal. Timber exported to the European Union (hereinafter referred to as “the Union”) are subject to specific provisions for FLEGT licensing as described in Annex IV.

The VNTLAS is based on regulations relevant to each step of the timber supply chain, including harvesting, import, transportation, processing, trade and exports of timber.

The VNTLAS is based on the national legislation in force, together with regulations introduced to implement this Agreement, which includes the participation of ministries, sectors, localities, and private-sector and civil-society organisations relevant to forestry and the trade of timber.

The VNTLAS consists of seven system elements, as follows:

1.

Timber Legality Definition (LD): Organisations and Households;

2.

Development, verification and approval of verifiers at all stages of supply chains;

3.

Organisation Classification System (OCS) and risk-based verification;

4.

Supply chain control;

5.

FLEGT licensing;

6.

Internal inspection, complaints and feedback mechanisms;

7.

Independent evaluation.

This Annex describes the key content of the aforementioned system elements and how, in principle, the VNTLAS shall work in practice. Other Annexes and Appendices to this Annex also provide additional information on the system functionalities.

This Annex has the following Appendices:

Appendix 1A (Development, verification and approval of legality verifiers for Organisations);

Appendix 1B (Development, verification and approval of legality verifiers for Households)

Appendix 2 (Supply chain control);

Appendix 3 (Standard form for self-declaration of imported timber sources).

2.   SCOPE OF APPLICATION

2.1   Timber sources

2.1.1   Timber sources controlled by the VNTLAS

The following timber sources are controlled by the VNTLAS:

Timber from domestic natural forests – defined as timber from main harvesting, salvage harvesting and salvage collection from domestic natural forest as defined and regulated by law.

Timber from domestic concentrated plantation forests – defined as timber from main harvesting, salvage harvesting and salvage collection from concentrated plantation forests, including both planted protection forest and planted production forest, having an area of 0.5 hectares or more and a forest strip of at least 20 metres long and three tree rows or more.

Timber from home gardens, farms and dispersed trees – defined as timber exploited from trees outside planned areas for forest land and concentrated plantations, including trees around the house and garden, on roadsides, embankments and field-sides, and around temples and pagodas.

Rubber wood – defined as rubber wood from harvesting from domestic rubber plantations on both agriculture and forest land.

Confiscated timber – defined as timber impounded as a result of either administrative violations or criminal violations, which is handled as state assets by the Vietnamese competent authorities and thereafter put under auction as required by law.

Imported timber – defined as all timber, including rubber wood, brought into the territory of Viet Nam from foreign countries, or to special zones in the territory of Viet Nam which are regarded as exclusive customs zones, in accordance with provisions of the law. In the VNTLAS, a distinction is made between primary and complex timber products impacting on the requirement for documentation to be provided to demonstrate the legality of imported timber. Primary products include both logs and sawn timber under the HS codes 4403, 4406 and 4407. Complex products include timber products under all the other HS codes of Chapter 44 and Chapter 94.

Details on the verification of timber sources entering the VNTLAS are given in Section 6.3.

2.1.2   Timber in transit

Timber in transit is not included in the VNTLAS.

“Timber products in transit” means any timber products originating from a third country, which enter the territory of Viet Nam under customs control and leave it in the same form whilst retaining their country of origin.

Transit timber remains segregated from timber entering the VNTLAS supply chain and is under customs supervision from the entry point into Viet Nam until exit from Viet Nam unprocessed in accordance with the laws and regulations of Viet Nam. Transit timber is not subject to VNTLAS legality verification and is not covered by the FLEGT licensing scheme.

2.2   Scope of control

The scope of control of the VNTLAS applies to:

all timber sources listed in Section 2.1.1;

all timber product categories listed in Annex I;

all operators (Organisations and Households) in the timber supply chain.

All principles, criteria, indicators and verifiers included in the LD for Organisations and Households are part of the VNTLAS.

Figure 1 illustrates the relationship between the seven main elements of the VNTLAS.

The VNTLAS is a national system that applies to (a) all Organisations and Households and (b) all domestic and export timber markets, to which the following system elements apply:

1.

Timber Legality Definition, as specified in Section 3 of this Annex and in Annex II;

2.

Development, verification and approval of verifiers at all stages of supply chains, as specified in Section 4 of this Annex;

3.

Organisation Classification System (OCS) and risk-based verification, as specified in Section 5 of this Annex;

4.

Supply chain control, as specified in Sections 6 and 7 of this Annex and Appendix 2 thereto;

5.

FLEGT licensing, as specified in Section 8 of this Annex and in Annex IV;

6.

Internal inspection, complaints and feedback mechanisms, as specified in Section 9;

7.

Independent evaluation, as specified in Section 10 of this Annex and in Annex VI.

System element 5 applies to timber exports to the Union market only.

System elements 6 and 7 cover all stages of supply chains up to and including the point of FLEGT licensing (system elements 1 to 5).

Image 10

Text of image

2.2.1   Definition of Organisations and Households

Organisations subject to the VNTLAS include forestry companies, state forest enterprises, protection forest management boards, special-use forest management boards, and cooperatives and enterprises involved at any stage of the supply chain and that have business registration.

Households subject to the VNTLAS include domestic households, individuals, village communities and all other entities not belonging to the Organisations category above. Household businesses employing more than 10 labourers on a regular basis are required to register as enterprises and are considered to be Organisations in the application of the VNTLAS.

2.2.2   Definition of government agencies

In the context of this Agreement, government agencies include several ministries and sectors at central level, technical departments under the Provincial and District Peoples Committee and Commune People’s Committees which are involved in the implementation of the VNTLAS, as identified in Appendices 1A and 1B to this Annex and summarised in Table 1.

2.2.3   Definition of the Verification Authority and verification entities

In the context of this Agreement, the Verification Authority comprises the Forest Protection agencies at all levels, namely the Central Forest Protection Department (Central FPD) under the Viet Nam Administration of Forestry (VNFOREST) under the Ministry of Agriculture and Rural Development (MARD), and the Provincial Forest Protection Department (Provincial FPD), including provincial and district offices of the FPD (hereinafter referred to as the “local FPD”).

Verification entities are government agencies and local government authorities, or other units, agencies or individuals in accordance with government regulation, that have responsibility for the development, verification and approval of verifiers under their area of jurisdiction as identified in Appendices 1A and 1B to this Annex and summarised in Table 1.

2.3   Recognition by the VNTLAS of voluntary certification and national certification schemes

A voluntary certification scheme is a market-based non-regulatory mechanism subject to third-party evaluation.

A national certification scheme is a voluntary or regulatory mechanism based on a defined set of criteria subject to government assessment and monitoring.

Recognised voluntary certification and national certification schemes are taken into account as a supplementary verifier for the risk-based verification of timber imports as specified in Section 6.3.7. Imported timber with a FLEGT licence or CITES permit are automatically recognised as legal as specified in Section 6.3.7.

Viet Nam shall assess voluntary certification and national certification schemes in accordance with VNTLAS requirements and decide on a list of certification schemes, which shall be shared with the Joint Implementation Committee (JIC) for information.

The assessment of voluntary certification and national certification schemes shall be conducted on the basis of a methodology approved by both parties in the JIC and the methodology shall be ready before the joint assessment of the VNTLAS (Annex VII). The list of recognised schemes may also be re-assessed, updated and brought to the attention of the JIC during implementation.

3.   LEGALITY DEFINITION

The Legality Definition (LD) sets out the core requirements of legislation applicable to timber in Viet Nam as presented in Annex II.

The LD is based on existing laws and legislation in place and has been developed through consultation with government, private-sector and civil-society stakeholders in Viet Nam.

After ratification of this Agreement, Viet Nam shall notify the Union of any changes pertaining to verifiers or legal references in the LD through the JIC, and the JIC shall examine the extent of the changes and the impacts on the LD at least every second year during the implementation of this Agreement as specified in Annex IX.

Viet Nam shall make public all relevant legislation referred to in the LD and any amendments thereto, as specified in Annex VIII.

3.1   Structure and content of the Legality Definition

The LD is divided into two parts: one for Organisations and one for Households, in order to cater for: (i) differences in the regulations that apply to these two target groups; (ii) differences in the size of investment and the scope and arrangement of their activities; and (iii) assuring compatibility of the LD for these two groups and making the VNTLAS clear, specific and implementable.

The differences between the LD for Organisations and the LD for Households are specified further in the introduction to Annex II.

Each part of the LD consists of seven principles, with each principle divided into criteria, indicators and verifiers:

Principle I: Harvesting of domestic timber complies with regulations on land use rights, forest use rights, management, environment and society;

Principle II: Compliance with regulations on handling confiscated timber;

Principle III: Compliance with regulations on importing timber;

Principle IV: Compliance with regulations on timber transportation and trade;

Principle V: Compliance with regulations on timber processing;

Principle VI: Compliance with regulations on customs procedures for export;

Principle VII (Organisations): Compliance with regulations on tax and employees;

Principle VII (Households): Compliance with regulations on tax.

To comply with the LD, Organisations and Households shall comply with all the applicable indicators under the seven principles enforced by the Verification Authority and verification entities as defined under Section 2.2.3 and Table 1.

The compliance of the indicators is assessed on the basis of the applicable corresponding verifiers.

For an indicator to be compliant, all the relevant verifiers must be checked and conform.

Table 1. Government agencies responsible for the development, verification and approval of verifiers under the VNTLAS

Principle and types of verifiers

Responsible agencies

PRINCIPLE I: HARVESTING OF DOMESTIC TIMBER COMPLIES WITH REGULATIONS ON LAND USE RIGHTS, FOREST USE RIGHTS, MANAGEMENT, ENVIRONMENT AND SOCIETY

Land use rights and forest use rights

Province, District and Commune Peoples Committee; Department of Natural Resources and Environment; Department of Agriculture and Rural Development

Business/enterprise registration

Department of Planning and Investment; management boards of industry parks / export processing zones

Sustainable forest management

Department of Agriculture and Rural Development

Environmental regulation

Province, District and Commune Peoples Committee; Department of Natural Resources and Environment

Conversion of forest land use to other uses

Province and District Peoples Committee

Supply chain control

Forest Protection agencies; Commune Peoples Committee

PRINCIPLE II: COMPLIANCE WITH REGULATIONS ON HANDLING CONFISCATED TIMBER

Handling and auction of confiscated assets

Ministry of Finance; Province and District Peoples Committee

Supply chain control

Forest Protection agencies

PRINCIPLE III: COMPLIANCE WITH REGULATIONS ON IMPORTING TIMBER

Customs procedures and regulation

Ministry of Finance / General Department of Customs; border customs authorities

CITES permits

CITES Management Authority

Plant quarantine

Department of Agriculture and Rural Development; border customs authorities

Supply chain control

Forest Protection agencies

Import – export timber trade regulation

Ministry of Industry and Trade

PRINCIPLE IV: COMPLIANCE WITH REGULATIONS ON TIMBER TRANSPORTATION AND TRADE

Business/enterprise registration

Department of Planning and Investment; management boards of industry parks / export processing zones

Supply chain control

Forest Protection agencies; Commune Peoples Committee

Domestic timber trade regulation

Ministry of Industry and Trade

PRINCIPLE V: COMPLIANCE WITH REGULATIONS ON TIMBER PROCESSING

Business/enterprise registration

Department of Planning and Investment; management boards of industry parks / export processing zones

Environmental regulation

Province, District and Commune Peoples Committee; Department of Natural Resources and Environment

Fire prevention and fire fighting

Province fire police

Supply chain control

Forest Protection agencies

Processing industry regulation

Ministry of Industry and Trade

PRINCIPLE VI: COMPLIANCE WITH REGULATIONS ON CUSTOMS PROCEDURES FOR EXPORT

Customs procedures and regulation

Ministry of Finance / General Department of Customs; border customs authorities

CITES permits

CITES Management Authority

Plant quarantine

Department of Agriculture and Rural Development; border customs authorities

Supply chain control

Forest Protection agencies

Import – export timber trade regulation

Ministry of Industry and Trade

PRINCIPLE VII (ORGANISATIONS): COMPLIANCE WITH REGULATIONS ON TAX AND EMPLOYEES

PRINCIPLE VII (HOUSEHOLDS): COMPLIANCE WITH REGULATIONS ON TAX

Tax regulation

Ministry of Finance / General Department of Taxation; Province Department of Taxation

Labour, health and safety regulation

Department of Labour, Invalids and Social Affairs; Work place Unions of the General Confederation of Labour

Social insurance

Viet Nam Social Insurance

4.   DEVELOPMENT, VERIFICATION AND APPROVAL OF VERIFIERS AT ALL STAGES OF THE SUPPLY CHAIN

4.1   Definition of verifiers

Verifiers are documents referred to in Annex II that are used for Organisations and Households to demonstrate legal compliance with the corresponding indicator. For clarifying verification methodologies applied under the VNTLAS, a distinction is made between “static” and “dynamic” verifiers, as identified for each verifier in Annex II.

4.1.1   Static verifiers

Static verifiers, as referred to in the LD, are used to verify the legal compliance of the establishment and operations of Organisations and Households in timber harvesting, processing, transportation and trade.

Static verifiers:

are developed and approved on a one-time basis and may be renewed on a periodic basis;

are verified and approved by the verification entities for each verifier on a periodic basis as required by law;

are used as a criterion as a part of the regular OCS assessment;

are made available if needed to support the exercise of ensuring the accuracy of the information and the legality of all timber when sourcing timber domestically;

include but are not limited to verifiers such as business registration, forest land use rights, and tax, labour and environment regulations.

4.1.2   Dynamic verifiers

Dynamic verifiers, as referred to in the LD, are used to verify the legal compliance of timber origin and timber in circulation at each stage of the supply chain. Dynamic verifiers are assessed by the Verification Authority and other responsible verification entities through the regular and frequent control process in the timber supply chain and in the OCS assessment for Organisations.

Dynamic verifiers:

are developed and approved to demonstrate the legal compliance of individual batches of timber;

are made available if needed to support the exercise of due diligence and are used to verify the legality of individual batches of timber in the VNTLAS supply chain;

include but are not limited to verifiers such as timber packing lists and invoices as regulated by Ministry of Finance for Organisations which are included in the timber product dossier at each critical control point in the supply chain;

are (i) verified and approved by the Verification Authority and other responsible verification entities based on frequency in accordance with the regulations applicable for each verifier and (ii) assessed systematically as part of (a) the OCS, (b) the supply chain controls and (c) verification for export.

The static and dynamic verifiers as identified in Annex II may be modified, supplemented or replaced. Annex II shall be updated and supplemented in accordance with Article 24 of this Agreement.

4.2   Development of verifiers

The development of verifiers is the preparation of a document or dossier of documents by Organisations and Households, or by verification entities, in accordance with Vietnamese laws and regulations as set out in Annex II and in Appendices 1A and 1B to this Annex.

In accordance with the legal requirements set out in Annex II, verifiers can be developed by Organisations and Households involved in the timber supply chain or by verification entities for each stage of the timber supply chain.

The responsible entities in charge of developing verifiers are defined in the “Prepared by” column of Appendices 1A and 1B to this Annex.

4.3   Verification and approval/certification of verifiers

The verification and approval of verifiers is conducted as described below.

Verification of verifiers is the process of checking the legality, validity and conformity of verifiers based on documentary and/or physical checks by the verification entities in accordance with regulations as set out in Annex II.

The approval of verifiers by verification entities is the recognition of the compliance of each verifier in accordance with regulations as set out in Annex II and in Appendices 1A and 1B to this Annex.

The term of certification of verifiers is used for approval of the packing list.

The responsible entities in charge of verifying and approving verifiers are defined in the “Approved -certified by” column of Appendices 1A and 1B to this Annex. The responsible entities in charge of checking each verifier are defined in the “Checked by” column of Appendices 1A and 1B to this Annex.

4.4   Responsibilities of relevant actors

4.4.1   Responsibilities of Organisations

1.

Organisations shall take responsibility for the accuracy of the information and the legality of all timber sources, including timber from domestic sources. For imported timber, Organisations shall exercise due diligence as specified in Section 6.3.7.

2.

Organisations are responsible for the development, verification and approval of verifiers or requiring verification entities to develop, verify and approve the verifiers for each timber purchase at each point of the supply chain.

3.

When purchasing timber from any source, Organisations shall check and keep records of the verifiers of legality of the purchased timber.

4.

Checks by Organisations entail ascertaining the validity, authenticity and conformity of the timber product dossier, including correlation with the timber, to ensure that the sourced timber is from legal sources. In the case of any suspicion of risk of illegal timber, the Organisations shall not purchase the timber.

5.

Organisations shall assess if the timber supplier conducts the checking and documentation of verifiers for legality of the purchased timber.

The appraisal and verification of Organisations in the OCS as specified in Section 5 shall review whether Organisations have adequately checked and documented verifiers of legality of the purchased timber.

4.4.2   Responsibilities of Households

1.

Households shall take responsibility for the accuracy of the information and the legality of all timber sources, including timber from domestic sources. For imported timber, Households shall exercise due diligence as specified in Section 6.3.7.

2.

Households shall take responsibility for development, verification and approval of verifiers or requiring verification entities to develop, verify and approve the verifiers for each timber purchase at each point of the supply chain.

3.

When purchasing timber from any source, Households shall check and keep records of the verifiers of legality of the purchased timber.

4.

Checks by Households entail ascertaining the validity, authenticity and conformity of the timber product dossier, including correlation with the timber, to ensure that the sourced timber is from a legal source. In the case of any suspicion of risk of illegal timber, the Households shall not purchase the timber.

5.

Households shall assess if the timber supplier conducts the checking and documentation of verifiers for legality of the purchased timber.

4.4.3   Responsibilities of government agencies

The responsibilities of government agencies in the development, verification and approval of verifiers are specified in Appendices 1A and 1B to this Annex and summarised in Table 1.

5.   ORGANISATION CLASSIFICATION SYSTEM AND RISK-BASED VERIFICATION

5.1   Purpose of the Organisation Classification System

The Organisation Classification System (OCS) is an integral component of the risk-based verification under the VNTLAS.

The purpose of the OCS is to:

(i)

assess the risk level of all Organisations under the VNTLAS with regard to their compliance with VNTLAS requirements in order to apply appropriate verification measures in an effective, efficient and timely manner;

(ii)

assess the legal compliance of Organisations with respect to static and dynamic verifiers as specified in the LD; and

(iii)

reduce administrative procedures, facilitate the production and business activities of Organisations and encourage Organisations to comply with the law.

The OCS shall apply to all Organisations in the VNTLAS supply chain.

5.2   Criteria and risk categories

Organisations are classified on the basis of the following criteria:

1.

compliance with dynamic / supply chain control verifiers to ensure that only legal timber enters the supply chain (as defined in Section 4.1);

2.

fulfilment of supply chain control declaration and reporting requirements (as described in Section 6.5);

3.

compliance with static verifiers (as defined in Section 4.1);

4.

record of violations (as described in Section 11).

Viet Nam shall consider how voluntary certification schemes, voluntary due diligence and chain-of-custody systems recognised under the VNTLAS can be integrated into the OCS methodology.

On the basis of these criteria, Organisations are classified into two risk categories:

Category 1 (compliant): Organisations that meet the criteria;

Category 2 (non-compliant): Organisations that do not fully meet the criteria or newly established Organisations.

The application of the criteria to the two risk categories is explained in Table 2.

Table 2. Minimum criteria and risk categories in the OCS

Criteria

Organisations Risk Category and minimum criteria for acceptance

Category 1

Category 2

1.

Compliance with dynamic / supply chain control verifiers to ensure that only legal timber enters the supply chain

Fully compliant

Any non-compliance

2.

Fulfilment of supply chain declaration and reporting requirements

Fully compliant

Failure to submit declarations and reports in accordance with legal requirement

3.

Compliance with static verifiers

Fully compliant

Non-compliance

4.

Record of violations and sanctions

No record of violations and sanctions

Any record of violations and sanctions

5.

Other criteria

 

Newly established Organisations

5.3   Implementation of the Organisation Classification System

The OCS shall be operated on a continuous basis through self-assessment by Organisations and appraisal and verification by the Provincial FPD or other entities authorised by the Government.

The Government of Viet Nam shall issue legislation guiding the implementation of the VNTLAS, including the OCS. Regulations, criteria, procedures, frequencies, methodology and responsibilities of relevant actors shall be elaborated in the VNTLAS implementation guidelines.

The OCS procedure, methodology and responsibilities are described in Figure 2.

Figure 2. OCS procedure, methodology and responsibilities

Image 11

Text of image

5.3.1   Self-assessment and appraisal procedure and frequency

After receiving the self-assessment conducted by Organisations, the Provincial FPD or other entities authorised by the government shall appraise the self-assessment through documentary and/or field checks in accordance with criteria 1 to 4 in Section 5.2 and Table 2, including for static and dynamic verifiers, information on cases of non-compliance from other provincial government agencies and verification entities. Information on the compliance of Organisations with regulations on customs procedures for import and export shall be used in the OCS assessment in line with Principles III and VI of the LD in Annex II.

The frequency of the OCS procedure includes: (i) periodic Organisation classification; and (ii) irregular Organisation classification subject to the detection of any non-compliance or violations by government agencies. The self-assessment and appraisal procedure and frequency are specified in Table 3.

Table 3. Self-assessment and appraisal procedure and frequency/timescale under the OCS

Procedure

Frequency/Timescale

1.

Periodic Organisation classification

Registration with the OCS system

All Organisations in the VNTLAS supply chain must register with the OCS.

Self-assessment / self-reassessment by Organisations

First self-assessment conducted by Organisation after registration with OCS.

Second self-assessment conducted for both Category 1 and 2 within one year of the first classification decision.

Third and following assessments:

+

For Category 1 OCS: every two years.

+

For Category 2 OCS: every year.

Appraisal of self-assessment by the Provincial FPD or other entities authorised by the government and notification of appraisal results to the Central FPD

Appraisal (after receiving self-assessment of Organisations) to be carried out within a specified period of time to be determined in future OCS legislation.

 

Decision and announcement of classification result by the Central FPD

Decision (after receiving appraisal results) to be announced within a specified period of time to be determined in future OCS legislation.

2.

Irregular Organisation classification

Where Organisations are subject to any administrative or criminal non-compliance and violations

The Central FPD shall automatically reclassify Category 1 to Category 2 and announce the reclassification results.

5.3.2   Classification results

Public announcements on those Organisations falling into each risk category shall be regularly updated on the OCS database managed by the Central FPD as specified in Section 12 of this Annex and in Annex VIII.

Once registered with the OCS, Organisations shall be able to access their information and decisions on risk categorisation on the OCS database. On the basis of the OCS risk categories, Organisations shall prepare the corresponding timber product dossier for export, as described in Section 7 of this Annex and in Annex IV.

The OCS and the customs risk assessment system are two separate but complementary systems with different data coverage. The customs authority of Viet Nam and the FPD shall regularly exchange information on the respective risk classification of Organisations. Whenever a change in the risk classification of Organisations takes place, this shall be notified between the two agencies and shall be taken into due consideration.

5.4   Responsibilities of relevant actors

5.4.1   Responsibilities of Organisations

All Organisations in the supply chain are responsible for registering with the OCS and submitting self-assessment in accordance with the specified criteria to the Provincial FPD or other entities authorised by the Government for appraisal.

Organisations shall conduct periodic self-reassessment as described in Table 3 and submit the self-reassessment to the Provincial FPD or other entities authorised by the Government for appraisal.

5.4.2   Responsibilities of government agencies

The Government of Viet Nam assigns overall responsibility for the organisation classification system and risk-based verification to the Central FPD and the Provincial FPD.

The Central FPD has responsibility for:

preparing implementation guidelines on the OCS based on regulations issued by the government;

creating and managing the centralised Organisations classification and OCS database;

managing the centralised database of violations of the Law on Forest Protection and Development;

deciding on the risk-category status of Organisations based on the appraisal results notified by the Provincial FPD or other entities authorised by the government;

publicising and updating the list of Organisations in each risk category on the FPD website.

The Provincial FPD or other entities authorised by the government has responsibility for:

receiving the self-assessment of Organisations registering into the system and appraising the self-assessment;

reassessing the classification status of Organisations as specified in Table 3;

monitoring the compliance of Organisations with the classification criteria in a timely manner through documentary and field checks to detect any non-compliance and to propose to the Central FPD any change in the category status of Organisations from Category 1 to Category 2;

liaising with other provincial government agencies and verification entities to verify the compliance status of Organisations;

reporting the results of the appraisal to the Central FPD for decision and public announcement by the Central FPD;

reporting to the Central FPD any cases of non-compliance by Organisations in the assessment period, which shall be managed and maintained in the Organisation classification and OCS database by the Central FPD.

6.   SUPPLY CHAIN CONTROL

6.1   Overview

Supply chain control aims to prevent the entrance of illegal timber or unverified timber into the VNTLAS supply chain. To achieve this overarching goal, the supply chain control system ensures that:

(a)

all Organisations involved in any stages of the timber supply chain are registered in the OCS;

(b)

all Organisations in the timber supply chain registered in the OCS report to the Forest Protection agencies in accordance with legal requirements;

(c)

supply chain reports are compiled and reconciled by Forest Protection agencies to identify any suspicious timber flow;

(d)

systematic, random and ad hoc physical checks by the Forest Protection agencies ensure that timber is consistent with the content of the corresponding documentation as declared by Organisations and Households, including in terms of (i) number of items, (ii) volume, and (iii) class of timber and/or species, at all stages of the supply chain;

(e)

identified suspicious timber flows are investigated by the Forest Protection agencies;

(f)

supply chain control is based on the documents required in the timber product dossier at each stage of the supply chain, as specified in Appendix 2;

(g)

Compliance with supply chain control verifiers and supply chain reporting requirements are criteria under the OCS as specified in Section 5 and Table 2.

Appendix 2 specifies requirements for reliable management of information associated with the timber product dossier at the different critical points of the supply chain.

6.2   Critical control points in the VNTLAS supply chain

Critical control points in the VNTLAS supply chain relate to

(i)

the verification of timber sources entering the VNTLAS (as described in Section 6.3); and

(ii)

stages in the supply chain from the point of harvest or import to the point of export.

The six critical control points in the supply chain under the VNTLAS are as follows:

1.

Timber sources entering the VNTLAS:

1a.

Timber from main harvesting of domestic natural forest (Organisations);

1b.

Timber from salvage harvesting and salvage collection of domestic natural forest (Organisations and Households);

1c.

Timber from main harvesting, salvage harvesting and salvage collection of planted protection forests (Organisations and Households);

1d.

Timber from main harvesting, salvage harvesting and salvage collection of planted production forests (Organisations and Households);

1e(1).

Rubber wood (Organisations);

1e(2).

Rubber wood; timber from home gardens, farms and dispersed trees (Households);

1f.

Handled confiscated timber (Organisations and Households);

1g.

Imported timber (Organisations and Households).

2.

First transport and trade transaction of timber products.

3.

Second transport and trade transaction of timber products.

4.

Any subsequent transportation and trade of products.

5.

Processing site.

6.

Export.

6.3   Verification of timber sources entering the VNTLAS

As specified under Section 2.1, all timber entering the VNTLAS is subject to specific regulations pertaining to the specific sources of timber. The verifiers for these timber sources entering the VNTLAS are specified in the LD and in Appendices 1A and 1B to this Annex.

Critical control points are established within the VNTLAS for all timber sources entering the system, as described in Section 6.2 and in Appendix 2.

Appendix 2 provides a detailed list of documents to be archived by Organisations and Households and the local FPD at each critical control point of the supply chain. Organisations should make those documents available to the Provincial FPD or other entities authorised by the Government during the OCS appraisal.

6.3.1   Timber from main harvesting of domestic natural forest (critical control point 1a)

Viet Nam maintains strict control over the management and harvesting of timber from domestic natural forest. Timber from main harvesting from domestic natural forest entering the VNTLAS is required to come from forest with approved Sustainable Forest Management Plans in addition to other specific environmental and supply chain controls as described under Criterion 1 of Principle I in Annex II (Organisations).

6.3.2   Timber from planted production and protection forests (critical control points 1c and 1d)

The policy of the Government of Viet Nam is to encourage the development of plantation forest, in support of which favourable conditions are applied for timber growers (Organisations and Households) as from the decision of land allocation or leasing and encompassing the time of planting, harvesting, transportation and trade of timber.

Legal requirements apply to timber from concentrated plantations depending on different forest categories, including planted protection forests and planted production forests, as specified in Criteria 2 and 3 of Principle I in Annex II (Organisations and Households).

6.3.3   Timber from salvage harvesting and salvage collection (critical control points 1b, 1c and 1d)

Salvage harvesting from natural forest when converting land use from forest use into other uses requires measures on compensation for site clearance approved by the Vietnamese competent authority. Criterion 4 under Principle I in Annex II (Organisations and Households) regulates the legal basis for the decision on land use change, the approval of measures on compensation for site clearance, and the approval of the environmental impact assessment.

Salvage timber may come from salvage harvesting and salvage collection from natural forest or concentrated plantation forest.

Salvage harvesting of timber means the harvesting of timber during the implementation of silvicultural measures, scientific research and site clearance of projects upon conversion of forest use purposes. Salvage collection of timber means the collection of fallen or dead trees due to natural disaster; burnt, rotten or dry timber; and branches of timber remaining in forests.

Regulations for salvage harvesting and collection are specified in Criteria 2 to 7 of Principle I in Annex II (Organisations and Households), including the following:

Criteria 2 and 3: Compliance with regulations on salvage harvesting and salvage collection from planted protection forest and planted production forests.

Criterion 4: Compliance with regulations on salvaging harvesting of natural forested areas converted from forest land use to other land uses.

Criterion 5: Compliance with regulations on salvage harvesting of natural forest while implementing silvicultural measures, scientific research and training.

Criterion 6: Compliance with regulations on salvage collection of stumps, roots, branches in natural forests.

Criterion 7: Compliance with regulations on salvage collection of stumps, roots, branches in plantation forests.

6.3.4   Timber from home gardens, farms and dispersed trees (critical control point 1e(2))

VNTLAS requirements related to the harvesting of timber from home gardens, farms and dispersed trees only apply to Households, and are specified in Criterion 7 under Principle I in Annex II (Households). The harvesting of timber from this source is described in Annex II.

6.3.5   Rubber wood from domestic sources (critical control points 1e(1) and 1e(2))

Rubber trees in Viet Nam are considered to be a multi-purpose industrial crop and are planted and harvested from both agricultural and forest land. For rubber wood and products manufactured from rubber wood that are harvested from any domestic sources entering the VNTLAS, it is necessary to present a timber product dossier that demonstrates legal origin, in line with the requirements set out under Principle I in Annex II (Criterion 8 for Organisations and Criterion 8 for Households).

Imported rubber wood is considered to be imported timber and is subject to the provisions of Section 6.3.7.

6.3.6   Handled confiscated timber (critical control point 1f)

Confiscated timber, as a State asset, is handled and managed in accordance with the law and regulations of Viet Nam. Handled confiscated timber is allowed to enter the VNTLAS supply chain and is eligible for FLEGT licensing on the condition that the steps for handling confiscated timber described below have been followed.

Step 1: Decisions on handling the administrative violations or handling the evidence of violation by State agencies with jurisdiction for confiscation of violated forest products, together with written minutes of treating the violation and a list of confiscated products.

Step 2. Preparation by local forest rangers of a list of the confiscated forest products (with hammer marks for round timber with diameter of ≥ 25 cm and length ≥ 1 m).

Step 3: Establishment of asset-valuation council to determine the starting price for auction of confiscated evidence/assets, with the starting price complying with provisions of the law on the enforcement of civil judgments.

Step 4: Contract for asset auction: authorisation of asset auction by the professional auction centre or auction business (for material evidence of administrative violations authorised by central or provincial authorities); or authorisation of asset auction by the district council (for material evidence of administrative violations authorised by the district authorities).

Step 5. Publicisation of the auction event.

Step 6. Registration of auction participants.

Step 7. Organisation of the auction.

Step 8. Contract for the purchase of auctioned assets.

Step 9. Payment for purchase of the assets, delivery of the assets.

Step 10. Issuance of certificates of ownership of auctioned assets.

Confiscated timber is legally allowed to enter the VNTLAS and the supply chain on evidence of a contract for the purchase of auctioned assets, a certificate of ownership and utilisation rights of auctioned assets, a VAT Invoice and a packing list of auctioned forest products, as described under Principle II in Annex II (Organisations and Households).

Data on the quantity and type of confiscated timber at (a) the point of confiscation and (b) post-auction are recorded in the FPD database on violations of the Law on Forest Protection and Development as described Section 11 of this Annex, and monitored and checked throughout the supply chain by the Forest Protection Agencies.

6.3.7   Imported timber (critical control point 1g)

The control and management of imported timber to Viet Nam is subject to legislation and regulations described in Principle III in Annex II (Organisations and Households) and the following three risk-based verification filters and measures shall apply:

1.

Customs risk assessment system;

2.

Species risk categories;

3.

Risk associated with geographic origin of timber.

The use of the above three filters shall determine: