Accept Refuse

EUR-Lex Access to European Union law

Back to EUR-Lex homepage

This document is an excerpt from the EUR-Lex website

Document 32017D0813

Council Decision (EU) 2017/813 of 12 October 2015 on the position to be adopted on behalf of the European Union within the EU-Chile Association Committee regarding the replacement of Appendix II to Annex III to the Agreement establishing an association between the European Community and its Member States, of the one part, and the Republic of Chile, of the other part

OJ L 127, 18.5.2017, p. 1–87 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

In force

ELI: http://data.europa.eu/eli/dec/2017/813/oj

18.5.2017   

EN

Official Journal of the European Union

L 127/1


COUNCIL DECISION (EU) 2017/813

of 12 October 2015

on the position to be adopted on behalf of the European Union within the EU-Chile Association Committee regarding the replacement of Appendix II to Annex III to the Agreement establishing an association between the European Community and its Member States, of the one part, and the Republic of Chile, of the other part

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular the first subparagraph of Article 207(4) in conjunction with Article 218(9) thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)

In accordance with Article 38 of Annex III to the Agreement establishing an association between the European Community and its Member States, of the one part, and the Republic of Chile, of the other part (1) (‘the Agreement’), the EU-Chile Association Committee (‘the Association Committee’) may decide to amend the provisions of that Annex.

(2)

On 4 November 2014, the Special Committee on Customs Cooperation and Rules of Origin, set up by Article 81 of the Agreement, agreed to recommend to the Association Committee amendments to Appendix II to Annex III to the Agreement, setting out the list of working or processing required to be carried out on non-originating materials in order for the product manufactured to obtain originating status (‘the product-specific rules’), in order to bring that Appendix into line with the latest version of the Harmonised Commodity Description and Coding System (HS).

(3)

The HS is updated every five years, the last update being in 2012. Since the product-specific rules in the Agreement are based on an outdated version of the HS, namely the HS 2002, they should be updated to reflect the HS 2012.

(4)

The product-specific rules should remain unchanged for those products that have been reclassified within the HS 2012. In cases where products need to be moved to a different chapter or heading, the product-specific rules should move with those products when the rules in the new chapter or heading are different from those laid down in the old chapter or heading.

(5)

The product-specific rules for a number of products of Chapter 72 of the HS should be amended in order to reflect the developments in the technological process of production of steel.

(6)

For reasons of clarity, taking into account the number of amendments that need to be made in Appendix II to Annex III to the Agreement, that Appendix should be replaced in its entirety.

(7)

The position to be adopted on the Union’s behalf within the Association Committee should be based on the attached draft decision,

HAS ADOPTED THIS DECISION:

Article 1

1.   The position to be adopted on the Union’s behalf within the Association Committee regarding the replacement of Appendix II to Annex III to the Agreement, setting out the product-specific rules, shall be based on the draft Decision of the Association Committee attached to this Decision.

2.   Minor changes to the draft Decision of the Association Committee may be agreed to by the representatives of the Union in the Association Committee without further decision of the Council.

Article 2

After its adoption, the Decision of the Association Committee shall be published in the Official Journal of the European Union.

Article 3

This Decision shall enter into force on the date of its adoption.

Done at Luxembourg, 12 October 2015.

For the Council

The President

F. MOGHERINI


(1)  OJ L 352, 30.12.2002, p. 3.


DRAFT

DECISION No … OF THE EU-CHILE ASSOCIATION COMMITTEE

of …

replacing Appendix II to Annex III to the Agreement establishing an association between the European Community and its Member States, of the one part, and the Republic of Chile, of the other part

THE EU-CHILE ASSOCIATION COMMITTEE,

Having regard to the Agreement establishing an association between the European Community and its Member States, of the one part, and the Republic of Chile, of the other part (1), and in particular Article 38 of Annex III thereto;

Whereas:

(1)

Amendments were introduced on 1 January 2007 and on 1 January 2012 into the Nomenclature governed by the Convention on the Harmonised Commodity Description and Coding System (‘the Harmonised System’).

(2)

As the amendments to the Harmonised System were not intended to change the rules of origin, they do not make substantive changes to the Agreement establishing an association between the European Community and its Member States, of the one part, and the Republic of Chile, of the other part (‘the Agreement’).

(3)

In order to reflect those amendments in the Agreement, Appendix II to Annex III to the Agreement needs to be amended.

(4)

In view of the number of amendments to be made in Appendix II to Annex III, clarity requires it to be replaced in its entirety.

(5)

It has been recognised as necessary to amend the rules of origin for a number of products of Chapter 72 of the Harmonized System to reflect developments in the technological process of production of steel,

HAS ADOPTED THIS DECISION:

Article 1

Appendix II to Annex III to the Agreement containing the list of working or processing required to be carried out on non-originating materials in order for the product manufactured to obtain originating status is replaced by the text set out in the Annex to this Decision.

Article 2

This Decision shall enter into force 90 days after the day on which the last notification by which the Parties communicate the completion of the necessary domestic legal procedures has been carried out.

Done at …,

For the EU-Chile Association Committee

The President


(1)  OJ L 352, 30.12.2002, p. 3.


ANNEX

‘Appendix II

LIST OF WORKING OR PROCESSING REQUIRED TO BE CARRIED OUT ON NON-ORIGINATING MATERIALS IN ORDER FOR THE PRODUCT MANUFACTURED TO OBTAIN ORIGINATING STATUS

HS heading

Description of product

Working or processing, carried out on non-originating materials, which confers originating status

Chapter 1

Live animals

All the animals of Chapter 1 shall be wholly obtained

 

Chapter 2

Meat and edible meat offal

Manufacture in which all the materials of Chapters 1 and 2 used are wholly obtained

 

Chapter 3

Fish and crustaceans, molluscs and other aquatic invertebrates

Manufacture in which all the materials of Chapter 3 used are wholly obtained

 

ex Chapter 4

Dairy produce; birds’ eggs; natural honey; edible products of animal origin, not elsewhere specified or included; except for:

Manufacture in which all the materials of Chapter 4 used are wholly obtained

 

0403

Buttermilk, curdled milk and cream, yoghurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa

Manufacture in which:

all the materials of Chapter 4 used are wholly obtained,

all the fruit juice (except that of pineapple, lime or grapefruit) of heading 2009 used is originating, and

the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

ex Chapter 5

Products of animal origin, not elsewhere specified or included; except for:

Manufacture in which all the materials of Chapter 5 used are wholly obtained

 

ex 0502

Prepared pigs’, hogs’ or boars’ bristles and hair

Cleaning, disinfecting, sorting and straightening of bristles and hair

 

Chapter 6

Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliage

Manufacture in which:

all the materials of Chapter 6 used are wholly obtained, and

the value of all the materials used does not exceed 50 % of the ex-works price of the product

Chapter 7

Edible vegetables and certain roots and tubers

Manufacture in which all the materials of Chapter 7 used are wholly obtained

 

Chapter 8

Edible fruit and nuts; peel of citrus fruits or melons

Manufacture in which:

all the fruit and nuts used are wholly obtained, and

the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

ex Chapter 9

Coffee, tea, maté and spices; except for:

Manufacture in which all the materials of Chapter 9 used are wholly obtained

 

0901

Coffee, whether or not roasted or decaffeinated; coffee husks and skins; coffee substitutes containing coffee in any proportion

Manufacture from materials of any heading

 

0902

Tea, whether or not flavoured

Manufacture from materials of any heading

 

ex 0910

Mixtures of spices

Manufacture from materials of any heading

 

Chapter 10

Cereals

Manufacture in which all the materials of Chapter 10 used are wholly obtained

 

ex Chapter 11

Products of the milling industry; malt; starches; inulin; wheat gluten; except for:

Manufacture in which all the cereals, edible vegetables, roots and tubers of heading 0714 or fruit used are wholly obtained

 

ex11 06

Flour, meal and powder of the dried, shelled leguminous vegetables of heading 0713

Drying and milling of leguminous vegetables of heading 0708

 

Chapter 12

Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodder

Manufacture in which all the materials of Chapter 12 used are wholly obtained

 

1301

Lac; natural gums, resins, gum-resins and oleoresins (for example, balsams)

Manufacture in which the value of all the materials of heading 1301 used does not exceed 50 % of the ex-works price of the product

 

1302

Vegetable saps and extracts; pectic substances, pectinates and pectates; agar-agar and other mucilages and thickeners, whether or not modified, derived from vegetable products:

 

 

Mucilages and thickeners, modified, derived from vegetable products

Manufacture from non-modified mucilages and thickeners

 

Other

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

Chapter 14

Vegetable plaiting materials; vegetable products not elsewhere specified or included

Manufacture in which all the materials of Chapter 14 used are wholly obtained

 

ex Chapter 15

Animal or vegetable fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes; except for:

Manufacture from materials of any heading, except that of the product

 

1501

Pig fat (including lard) and poultry fat, other than that of heading 0209 or 1503:

 

 

Fats from bones or waste

Manufacture from materials of any heading, except those of heading 0203, 0206 or 0207 or bones of heading 0506

 

Other

Manufacture from meat or edible offal of swine of heading 0203 or 0206 or of meat and edible offal of poultry of heading 0207

 

1502

Fats of bovine animals, sheep or goats, other than those of heading 1503:

 

 

Fats from bones or waste

Manufacture from materials of any heading, except those of heading 0201, 0202, 0204 or 0206 or bones of heading 0506

 

Other

Manufacture in which all the materials of Chapter 2 used are wholly obtained

 

1504

Fats and oils and their fractions, of fish or marine mammals, whether or not refined, but not chemically modified:

 

 

Solid fractions

Manufacture from materials of any heading, including other materials of heading 1504

 

Other

Manufacture in which all the materials of Chapters 2 and 3 used are wholly obtained

 

ex 1505

Refined lanolin

Manufacture from crude wool grease of heading 1505

 

1506

Other animal fats and oils and their fractions, whether or not refined, but not chemically modified:

 

 

Solid fractions

Manufacture from materials of any heading, including other materials of heading 1506

 

Other

Manufacture in which all the materials of Chapter 2 used are wholly obtained

 

1507 to 1515

Vegetable oils and their fractions:

 

 

Soya, ground nut, palm, copra, palm kernel, babassu, tung and oiticica oil, myrtle wax and Japan wax, fractions of jojoba oil and oils for technical or industrial uses other than the manufacture of foodstuffs for human consumption

Manufacture from materials of any heading, except that of the product

 

Solid fractions, except for that of jojoba oil

Manufacture from other materials of headings 1507 to 1515

 

Other

Manufacture in which all the vegetable materials used are wholly obtained

 

1516

Animal or vegetable fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinised, whether or not refined, but not further prepared

Manufacture in which:

all the materials of Chapter 2 used are wholly obtained, and

all the vegetable materials used are wholly obtained. However, materials of headings 1507, 1508, 1511 and 1513 may be used

1517

Margarine; edible mixtures or preparations of animal or vegetable fats or oils or of fractions of different fats or oils of this Chapter, other than edible fats or oils or their fractions of heading 1516

Manufacture in which:

all the materials of Chapters 2 and 4 used are wholly obtained, and

all the vegetable materials used are wholly obtained. However, materials of headings 1507, 1508, 1511 and 1513 may be used

Chapter 16

Preparations of meat, of fish or of crustaceans, molluscs or other aquatic invertebrates

Manufacture:

from animals of Chapter 1, and/or

in which all the materials of Chapter 3 used are wholly obtained

ex Chapter 17

Sugars and sugar confectionery; except for:

Manufacture from materials of any heading, except that of the product

 

ex 1701

Cane or beet sugar and chemically pure sucrose, in solid form, containing added flavouring or colouring matter

Manufacture in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

 

1702

Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel:

 

 

Chemically-pure maltose and fructose

Manufacture from materials of any heading, including other materials of heading 1702

 

Other sugars in solid form, containing added flavouring or colouring matter

Manufacture in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

 

Other

Manufacture in which all the materials used are originating

 

ex 1703

Molasses resulting from the extraction or refining of sugar, containing added flavouring or colouring matter

Manufacture in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

 

1704

Sugar confectionery (including white chocolate), not containing cocoa

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

Chapter 18

Cocoa and cocoa preparations

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

1901

Malt extract; food preparations of flour, groats, meal, starch or malt extract, not containing cocoa or containing less than 40 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of headings 0401 to 0404, not containing cocoa or containing less than 5 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included:

 

 

Malt extract

Manufacture from cereals of Chapter 10

 

Other

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

1902

Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared:

 

 

Containing 20 % or less by weight of meat, meat offal, fish, crustaceans or molluscs

Manufacture in which all the cereals and derivatives (except durum wheat and its derivatives) used are wholly obtained

 

Containing more than 20 % by weight of meat, meat offal, fish, crustaceans or molluscs

Manufacture in which:

all the cereals and their derivatives (except durum wheat and its derivatives) used are wholly obtained, and

all the materials of Chapters 2 and 3 used are wholly obtained

1903

Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or similar forms

Manufacture from materials of any heading, except potato starch of heading 1108

 

1904

Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals (other than maize (corn)) in grain form or in the form of flakes or other worked grains (except flour, groats and meal), pre-cooked or otherwise prepared, not elsewhere specified or included

Manufacture:

from materials of any heading, except those of heading 1806,

in which all the cereals and flour (except durum wheat and Zea indurata maize, and their derivatives) used are wholly obtained, and

in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

1905

Bread, pastry, cakes, biscuits and other bakers’ wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products

Manufacture from materials of any heading, except those of Chapter 11

 

ex Chapter 20

Preparations of vegetables, fruit, nuts or other parts of plants; except for:

Manufacture in which all the fruit, nuts or vegetables used are wholly obtained

 

ex 2001

Yams, sweet potatoes and similar edible parts of plants containing 5 % or more by weight of starch, prepared or preserved by vinegar or acetic acid

Manufacture from materials of any heading, except that of the product

 

ex 2004 and ex 2005

Potatoes in the form of flour, meal or flakes, prepared or preserved otherwise than by vinegar or acetic acid

Manufacture from materials of any heading, except that of the product

 

2006

Vegetables, fruit, nuts, fruit-peel and other parts of plants, preserved by sugar (drained, glacé or crystallised)

Manufacture in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

 

2007

Jams, fruit jellies, marmalades, fruit or nut purée and fruit or nut pastes, obtained by cooking, whether or not containing added sugar or other sweetening matter

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

ex 2008

Nuts, not containing added sugar or spirits

Manufacture in which the value of all the originating nuts and oil seeds of headings 0801, 0802 and 1202 to 1207 used exceeds 60 % of the ex-works price of the product

 

Peanut butter; mixtures based on cereals; palm hearts; maize (corn)

Manufacture from materials of any heading, except that of the product

 

Other except for fruit and nuts cooked otherwise than by steaming or boiling in water, not containing added sugar, frozen

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

2009

Fruit juices (including grape must) and vegetable juices, unfermented and not containing added spirit, whether or not containing added sugar or other sweetening matter

 

 

Citrus juices

Manufacture in which:

all the citrus fruits used must be wholly obtained,

the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

Other

Manufacture in which:

all the materials used are classified within a heading other than that of the product,

in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

ex Chapter 21

Miscellaneous edible preparations; except for:

Manufacture from materials of any heading, except that of the product

 

2101

Extracts, essences and concentrates, of coffee, tea or maté and preparations with a basis of these products or with a basis of coffee, tea or maté; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof

Manufacture:

from materials of any heading, except that of the product, and

in which all the chicory used is wholly obtained

2103

Sauces and preparations therefor; mixed condiments and mixed seasonings; mustard flour and meal and prepared mustard:

 

 

Sauces and preparations therefor; mixed condiments and mixed seasonings

Manufacture from materials of any heading, except that of the product. However, mustard flour or meal or prepared mustard may be used

 

Mustard flour and meal and prepared mustard

Manufacture from materials of any heading

 

ex 2104

Soups and broths and preparations therefor

Manufacture from materials of any heading, except prepared or preserved vegetables of headings 2002 to 2005

 

2106

Food preparations not elsewhere specified or included

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product

ex Chapter 22

Beverages, spirits and vinegar; except for:

Manufacture:

from materials of any heading, except that of the product, and

in which all the grapes or materials derived from grapes used are wholly obtained

2202

Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured, and other non-alcoholic beverages, not including fruit or vegetable juices of heading 2009

Manufacture:

from materials of any heading, except that of the product,

in which the value of all the materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product, and

in which all the fruit juice used (except that of pineapple, lime or grapefruit) is originating

2207

Undenatured ethyl alcohol of an alcoholic strength by volume of 80 % vol or higher; ethyl alcohol and other spirits, denatured, of any strength

Manufacture:

from materials of any heading, except those of heading 2207 or 2208, and

in which all the grapes or materials derived from grapes used are wholly obtained or, if all the other materials used are already originating, arrack may be used up to a limit of 5 % by volume

2208

Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol; spirits, liqueurs and other spirituous beverages

Manufacture:

from materials of any heading, except heading 2207 or 2208, and

in which all the grapes or materials derived from grapes used are wholly obtained or, if all the other materials used are already originating, arrack may be used up to a limit of 5 % by volume

ex Chapter 23

Residues and waste from the food industries; prepared animal fodder; except for:

Manufacture from materials of any heading, except that of the product

 

ex 2301

Whale meal; flours, meals and pellets of fish or of crustaceans, molluscs or other aquatic invertebrates, unfit for human consumption

Manufacture in which all the materials of Chapters 2 and 3 used are wholly obtained

 

ex 2303

Residues from the manufacture of starch from maize (excluding concentrated steeping liquors), of a protein content, calculated on the dry product, exceeding 40 % by weight

Manufacture in which all the maize used is wholly obtained

 

ex 2306

Oil cake and other solid residues resulting from the extraction of olive oil, containing more than 3 % of olive oil

Manufacture in which all the olives used are wholly obtained

 

2309

Preparations of a kind used in animal feeding

Manufacture in which:

all the cereals, sugar or molasses, meat or milk used are originating, and

all the materials of Chapter 3 used are wholly obtained

ex Chapter 24

Tobacco and manufactured tobacco substitutes; except for:

Manufacture in which all the materials of Chapter 24 used are wholly obtained

 

2402

Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutes

Manufacture in which at least 70 % by weight of the unmanufactured tobacco or tobacco refuse of heading 2401 used is originating

 

ex 2403

Smoking tobacco

Manufacture in which at least 70 % by weight of the unmanufactured tobacco or tobacco refuse of heading 2401 used is originating

 

ex Chapter 25

Salt; sulphur; earths and stone; plastering materials, lime and cement; except for:

Manufacture from materials of any heading, except that of the product

 

ex 2504

Natural crystalline graphite, with enriched carbon content, purified and ground

Enriching of the carbon content, purifying and grinding of crude crystalline graphite

 

ex 2515

Marble, merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm

Cutting, by sawing or otherwise, of marble (even if already sawn) of a thickness exceeding 25 cm

 

ex 2516

Granite, porphyry, basalt, sandstone and other monumental or building stone, merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cm

Cutting, by sawing or otherwise, of stone (even if already sawn) of a thickness exceeding 25 cm

 

ex 2518

Calcined dolomite

Calcination of dolomite not calcined

 

ex 2519

Crushed natural magnesium carbonate (magnesite), in hermetically-sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead-burned (sintered) magnesia

Manufacture from materials of any heading, except that of the product. However, natural magnesium carbonate (magnesite) may be used

 

ex 2520

Plasters specially prepared for dentistry

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex 2524

Natural asbestos fibres

Manufacture from asbestos concentrate

 

ex 2525

Mica powder

Grinding of mica or mica waste

 

ex 2530

Earth colours, calcined or powdered

Calcination or grinding of earth colours

 

Chapter 26

Ores, slag and ash

Manufacture from materials of any heading, except that of the product

 

ex Chapter 27

Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes; except for:

Manufacture from materials of any heading, except that of the product

 

ex 2707

Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65 % by volume distils at a temperature of up to 250 oC (including mixtures of petroleum spirit and benzole), for use as power or heating fuels

Operations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product

 

ex 2709

Crude oils obtained from bituminous minerals

Destructive distillation of bituminous materials

 

2710

Petroleum oils and oils obtained from bituminous materials, other than crude; preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous materials, these oils being the basic constituents of the preparations; waste oils

Operations of refining and/or one or more specific process(es) (2)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product

 

2711

Petroleum gases and other gaseous hydrocarbons

Operations of refining and/or one or more specific process(es) (2)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product

 

2712

Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured

Operations of refining and/or one or more specific process(es) (2)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product

 

2713

Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous materials

Operations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product

 

2714

Bitumen and asphalt, natural; bituminous or oil shale and tar sands; asphaltites and asphaltic rocks

Operations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product

 

2715

Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs)

Operations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product

 

ex Chapter 28

Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 2805

“Mischmetall”

Manufacture by electrolytic or thermal treatment in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex 2811

Sulphur trioxide

Manufacture from sulphur dioxide

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 2833

Aluminium sulphate

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex 2840

Sodium perborate

Manufacture from disodium tetraborate pentahydrate

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 2852

Mercury compounds of internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives

Manufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Mercury compounds of nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds

Manufacture from materials of any heading. However, the value of all the materials of headings 2852, 2932, 2933 and 2934 used shall not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Mercury compounds of chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

Mercury compounds of diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, other than those of heading 3002 or 3006; certified reference materials

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex Chapter 29

Organic chemicals; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 2901

Acyclic hydrocarbons for use as power or heating fuels

Operations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product

 

ex 2902

Cyclanes and cyclenes (other than azulenes), benzene, toluene, xylenes, for use as power or heating fuels

Operations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product

 

ex 2905

Metal alcoholates of alcohols of this heading and of ethanol

Manufacture from materials of any heading, including other materials of heading 2905. However, metal alcoholates of this heading may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

2915

Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives

Manufacture from materials of any heading. However, the value of all the materials of headings 2915 and 2916 used shall not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 2932

Internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives

Manufacture from materials of any heading. However, the value of all the materials of heading 2909 used shall not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Cyclic acetals and internal hemiacetals and their halogenated, sulphonated, nitrated or nitrosated derivatives

Manufacture from materials of any heading

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

2933

Heterocyclic compounds with nitrogen hetero-atom(s) only

Manufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used shall not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

2934

Nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds

Manufacture from materials of any heading. However, the value of all the materials of headings 2932, 2933 and 2934 used shall not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 2939

Concentrates of poppy straw containing not less than 50 % by weight of alkaloids

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex Chapter 30

Pharmaceutical products; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

 

3002

Human blood; animal blood prepared for therapeutic, prophylactic or diagnostic uses; antisera and other blood fractions and immunological products, whether or not modified or obtained by means of biotechnological processes; vaccines, toxins, cultures of micro-organisms (excluding yeasts) and similar products:

 

 

Products consisting of two or more constituents which have been mixed together for therapeutic or prophylactic uses or unmixed products for these uses, put up in measured doses or in forms or packings for retail sale

Manufacture from materials of any heading, including other materials of heading 3002. However, materials of the same description as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

 

Other

 

 

 

— —

Human blood

Manufacture from materials of any heading, including other materials of heading 3002. However, materials of the same description as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

 

— —

Animal blood prepared for therapeutic or prophylactic uses

Manufacture from materials of any heading, including other materials of heading 3002. However, materials of the same description as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

 

— —

Blood fractions other than antisera, haemoglobin, blood globulins and serum globulins

Manufacture from materials of any heading, including other materials of heading 3002. However, materials of the same description as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

 

 

— —

Haemoglobin, blood globulins and serum globulins

Manufacture from materials of any heading, including other materials of heading 3002. However, materials of the same description as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

 

— —

Other

Manufacture from materials of any heading, including other materials of heading 3002. However, materials of the same description as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

 

3003 and 3004

Medicaments (excluding goods of heading 3002, 3005 or 3006):

 

 

Obtained from amikacin of heading 2941

Manufacture from materials of any heading, except that of the product. However, materials of headings 3003 or 3004 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

 

Other

Manufacture:

from materials of any heading, except that of the product. However, materials of headings 3003 or 3004 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

ex 3006

Waste pharmaceuticals specified in Note 4(k) to this chapter

The origin of the product in its original classification shall be retained

 

Sterile surgical or dental adhesion barriers, whether or not absorbable:

 

 

made of plastics

Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

made of fabrics

Manufacture from (3):

natural fibres,

man-made staple fibres, not carded or combed or otherwise processed for spinning,

or

chemical materials or textile pulp

Appliances identifiable for ostomy use

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex Chapter 31

Fertilisers; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3105

Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium; other fertilisers; goods of this chapter, in tablets or similar forms or in packages of a gross weight not exceeding 10 kg, except for:

sodium nitrate

calcium cyanamide

potassium sulphate

magnesium potassium sulphate

Manufacture:

from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex Chapter 32

Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3201

Tannins and their salts, ethers, esters and other derivatives

Manufacture from tanning extracts of vegetable origin

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

3205

Colour lakes; preparations as specified in Note 3 to this chapter based on colour lakes (4)

Manufacture from materials of any heading, except headings 3203, 3204 and 3205. However, materials of heading 3205 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex Chapter 33

Essential oils and resinoids; perfumery, cosmetic or toilet preparations; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

3301

Essential oils (terpeneless or not), including concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils

Manufacture from materials of any heading, including materials of a different “group” (5) in this heading. However, materials of the same group as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex Chapter 34

Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, “dental waxes” and dental preparations with a basis of plaster; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3403

Lubricating preparations containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals

Operations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product

 

3404

Artificial waxes and prepared waxes:

 

 

With a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product

 

Other

Manufacture from materials of any heading, except:

hydrogenated oils having the character of waxes of heading 1516,

fatty acids not chemically defined or industrial fatty alcohols having the character of waxes of heading 3823, and

materials of heading 3404.

However, these materials may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex Chapter 35

Albuminoidal substances; modified starches; glues; enzymes; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

3505

Dextrins and other modified starches (for example, pregelatinised or esterified starches); glues based on starches, or on dextrins or other modified starches:

 

 

Starch ethers and esters

Manufacture from materials of any heading, including other materials of heading 3505

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Other

Manufacture from materials of any heading, except those of heading 1108

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3507

Prepared enzymes not elsewhere specified or included

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

Chapter 36

Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex Chapter 37

Photographic or cinematographic goods; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

3701

Photographic plates and film in the flat, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in the flat, sensitised, unexposed, whether or not in packs:

 

 

Instant print film for colour photography, in packs

Manufacture from materials of any heading, except those of heading 3701 or 3702. However, materials of heading 3702 may be used, provided that their total value does not exceed 30 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Other

Manufacture from materials of any heading, except those of heading 3701 or 3702. However, materials of heading 3701 and 3702 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

3702

Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposed

Manufacture from materials of any heading, except those of heading 3701 or 3702

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

3704

Photographic plates, film paper, paperboard and textiles, exposed but not developed

Manufacture from materials of any heading, except those of headings 3701 to 3704

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex Chapter 38

Miscellaneous chemical products; except for:

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3801

Colloidal graphite in suspension in oil and semi-colloidal graphite; carbonaceous pastes for electrodes

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

Graphite in paste form, being a mixture of more than 30 % by weight of graphite with mineral oils

Manufacture in which the value of all the materials of heading 3403 used does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3803

Refined tall oil

Refining of crude tall oil

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3805

Spirits of sulphate turpentine, purified

Purification by distillation or refining of raw spirits of sulphate turpentine

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3806

Ester gums

Manufacture from resin acids

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 3807

Wood pitch (wood tar pitch)

Distillation of wood tar

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

3808

Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products and plant-growth regulators, disinfectants and similar products, put up in forms or packings for retail sale or as preparations or articles (for example, sulphur-treated bands, wicks and candles, and fly-papers)

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3809

Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3810

Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3811

Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils:

 

 

Prepared additives for lubricating oil, containing petroleum oils or oils obtained from bituminous minerals

Manufacture in which the value of all the materials of heading 3811 used does not exceed 50 % of the ex-works price of the product

 

Other

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3812

Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidising preparations and other compound stabilisers for rubber or plastics

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3813

Preparations and charges for fire-extinguishers; charged fire-extinguishing grenades

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3814

Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3818

Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3819

Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3820

Anti-freezing preparations and prepared de-icing fluids

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex 3821

Prepared culture media for the development or maintenance of micro-organisms (including viruses and the like) or of plant, human or animal cells

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3822

Diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, other than those of heading 3002 or 3006; certified reference materials

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3823

Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols:

 

 

Industrial monocarboxylic fatty acids, acid oils from refining

Manufacture from materials of any heading, except that of the product

 

Industrial fatty alcohols

Manufacture from materials of any heading, including other materials of heading 3823

 

3824

Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included:

 

 

The following of this heading:

— —

Prepared binders for foundry moulds or cores based on natural resinous products

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

— —

Naphthenic acids, their water-insoluble salts and their esters

— —

Sorbitol other than that of heading 2905

— —

Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts

— —

Ion exchangers

— —

Getters for vacuum tubes

— —

Ammoniacal gas liquors and spent oxide produced in coal gas purification

— —

Sulphonaphthenic acids, their water-insoluble salts and their esters

— —

Fusel oil and Dippel’s oil

— —

Mixtures of salts having different anions

— —

Copying pastes with a basis of gelatin, whether or not on a paper or textile backing

 

Other

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3826

Biodiesel and mixtures thereof, not containing or containing less than 70 % by weight of petroleum oils or oils obtained from bituminous minerals

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

3901 to 3915

Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex39 07 and 3912 for which the rules are set out below:

 

 

Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content

Manufacture in which:

the value of all the materials used does not exceed 50 % of the ex-works price of the product, and

within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (6)

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

Other

Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product 1

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

ex 3907

Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS)

Manufacture from materials of any heading, except that of the product. However, materials of the same heading as the product may be used, provided that their total value does not exceed 50 % of the ex-works price of the product (6)

 

Polyester

Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)

 

3912

Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms

Manufacture in which the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product

 

3916 to 3921

Semi-manufactures and articles of plastics; except for headings ex 3916, ex 3917, ex 3920 and ex 3921, for which the rules are set out below:

 

 

Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked

Manufacture in which the value of all the materials of Chapter 39 used does not exceed 50 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

 

Other:

 

 

— —

Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content

Manufacture in which:

the value of all the materials used does not exceed 50 % of the ex-works price of the product, and

within the above limit, the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (6)

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

— —

Other

Manufacture in which the value of all the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product 1

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

ex 3916 and ex 3917

Profile shapes and tubes

Manufacture in which:

the value of all the materials used does not exceed 50 % of the ex-works price of the product, and

within the above limit, the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

ex 3920

Ionomer sheet or film

Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodium

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Sheets of regenerated cellulose, polyamides or polyethylene

Manufacture in which the value of all the materials of the same heading as the product used does not exceed 20 % of the ex-works price of the product

 

ex 3921

Foils of plastic, metallised

Manufacture from highly-transparent polyester-foils with a thickness of less than 23 micron (7)

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

3922 to 3926

Articles of plastics

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex Chapter 40

Rubber and articles thereof; except for:

Manufacture from materials of any heading, except that of the product

 

ex 4001

Laminated slabs of crepe rubber for shoes

Lamination of sheets of natural rubber

 

4005

Compounded rubber, unvulcanised, in primary forms or in plates, sheets or strip

Manufacture in which the value of all the materials used, except natural rubber, does not exceed 50 % of the ex-works price of the product

 

4012

Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber:

 

 

Retreaded pneumatic, solid or cushion tyres, of rubber

Retreading of used tyres

 

Other

Manufacture from materials of any heading, except those of heading 4011 and 4012

 

ex 4017

Articles of hard rubber

Manufacture from hard rubber

 

ex Chapter 41

Raw hides and skins (other than furskins) and leather; except for:

Manufacture from materials of any heading, except that of the product

 

ex 4102

Raw skins of sheep or lambs, without wool on

Removal of wool from sheep or lamb skins, with wool on

 

4104 to 4106

Tanned or crust hides and skins, without wool or hair on, whether or not split, but not further prepared

Retanning of tanned leather

or

Manufacture from materials of any heading, except that of the product

 

4107, 4112 and 4113

Leather further prepared after tanning or crusting, including parchment-dressed leather, without wool or hair on, whether or not split, other than leather of heading 4114

Manufacture from materials of any heading, except headings 4104 to 4113

 

ex 4114

Patent leather and patent laminated leather; metallised leather

Manufacture from materials of headings 4104 to 4107, 4112 or 4113, provided that their total value does not exceed 50 % of the ex-works price of the product

 

Chapter 42

Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut)

Manufacture from materials of any heading, except that of the product

 

ex Chapter 43

Furskins and artificial fur; manufactures thereof; except for:

Manufacture from materials of any heading, except that of the product

 

ex 4302

Tanned or dressed furskins, assembled:

 

 

Plates, crosses and similar forms

Bleaching or dyeing, in addition to cutting and assembly of non-assembled tanned or dressed furskins

 

Other

Manufacture from non-assembled, tanned or dressed furskins

 

4303

Articles of apparel, clothing accessories and other articles of furskin

Manufacture from non-assembled tanned or dressed furskins of heading 4302

 

ex Chapter 44

Wood and articles of wood; wood charcoal; except for:

Manufacture from materials of any heading, except that of the product

 

ex 4403

Wood roughly squared

Manufacture from wood in the rough, whether or not stripped of its bark or merely roughed down

 

ex 4407

Wood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or end-jointed

Planing, sanding or end-jointing

 

ex 4408

Sheets for veneering (including those obtained by slicing laminated wood) and for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled of a thickness not exceeding 6 mm, planed, sanded or end-jointed

Splicing, planing, sanding or end-jointing

 

ex 4409

Wood continuously shaped along any of its edges, ends or faces, whether or not planed, sanded or end-jointed:

 

 

Sanded or end-jointed

Sanding or end-jointing

 

Beadings and mouldings

Beading or moulding

 

ex 4410 to ex 4413

Beadings and mouldings, including moulded skirting and other moulded boards

Beading or moulding

 

ex 4415

Packing cases, boxes, crates, drums and similar packings, of wood

Manufacture from boards not cut to size

 

ex 4416

Casks, barrels, vats, tubs and other coopers’ products and parts thereof, of wood

Manufacture from riven staves, not further worked than sawn on the two principal surfaces

 

ex 4418

Builders’ joinery and carpentry of wood

Manufacture from materials of any heading, except that of the product. However, cellular wood panels, shingles and shakes may be used

 

Beadings and mouldings

Beading or moulding

 

ex 4421

Match splints; wooden pegs or pins for footwear

Manufacture from wood of any heading, except drawn wood of heading 4409

 

ex Chapter 45

Cork and articles of cork; except for:

Manufacture from materials of any heading, except that of the product

 

4503

Articles of natural cork

Manufacture from cork of heading 4501

 

Chapter 46

Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork

Manufacture from materials of any heading, except that of the product

 

Chapter 47

Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboard

Manufacture from materials of any heading, except that of the product

 

ex Chapter 48

Paper and paperboard; articles of paper pulp, of paper or of paperboard; except for:

Manufacture from materials of any heading, except that of the product

 

ex 4811

Paper and paperboard, ruled, lined or squared only

Manufacture from paper-making materials of Chapter 47

 

4816

Carbon paper, self-copy paper and other copying or transfer papers (other than those of heading 4809), duplicator stencils and offset plates, of paper, whether or not put up in boxes

Manufacture from paper-making materials of Chapter 47

 

4817

Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

ex 4818

Toilet paper

Manufacture from paper-making materials of Chapter 47

 

ex 4819

Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

ex 4820

Letter pads

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

ex 4823

Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape

Manufacture from paper-making materials of Chapter 47

 

ex Chapter 49

Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans; except for:

Manufacture from materials of any heading, except that of the product

 

4909

Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmings

Manufacture from materials of any heading, except those of heading 4909 or 4911

 

4910

Calendars of any kind, printed, including calendar blocks:

 

 

Calendars of the “perpetual” type or with replaceable blocks mounted on bases other than paper or paperboard

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

Other

Manufacture from materials of any heading, except those of heading 4909 or 4911

 

ex Chapter 50

Silk; except for:

Manufacture from materials of any heading, except that of the product

 

ex 5003

Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock), carded or combed

Carding or combing of silk waste

 

5004 to ex 5006

Silk yarn and yarn spun from silk waste

Manufacture from (3):

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

other natural fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials

5007

Woven fabrics of silk or of silk waste:

 

 

Incorporating rubber thread

Manufacture from single yarn (3)

 

Other

Manufacture from 1 :

coir yarn,

natural fibres,

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  % of the ex-works price of the product

 

ex Chapter 51

Wool, fine or coarse animal hair; horsehair yarn and woven fabric; except for:

Manufacture from materials of any heading, except that of the product

 

5106 to 5110

Yarn of wool, of fine or coarse animal hair or of horsehair

Manufacture from (3):

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

natural fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials

5111 to 5113

Woven fabrics of wool, of fine or coarse animal hair or of horsehair:

 

 

Incorporating rubber thread

Manufacture from single yarn (3)

 

Other

Manufacture from 1 :

coir yarn,

natural fibres,

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  % of the ex-works price of the product

 

ex Chapter 52

Cotton; except for:

Manufacture from materials of any heading, except that of the product

 

5204 to 5207

Yarn and thread of cotton

Manufacture from (3):

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

natural fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials

5208 to 5212

Woven fabrics of cotton:

 

 

Incorporating rubber thread

Manufacture from single yarn (3)

 

Other

Manufacture from 1 :

coir yarn,

natural fibres,

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  % of the ex-works price of the product

 

ex Chapter 53

Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn; except for:

Manufacture from materials of any heading, except that of the product

 

5306 to 5308

Yarn of other vegetable textile fibres; paper yarn

Manufacture from (3):

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

natural fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials

5309 to 5311

Woven fabrics of other vegetable textile fibres; woven fabrics of paper yarn:

 

 

Incorporating rubber thread

Manufacture from single yarn (3)

 

Other

Manufacture from 1 :

coir yarn,

jute yarn,

natural fibres,

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  % of the ex-works price of the product

 

5401 to 5406

Yarn, monofilament and thread of man-made filaments

Manufacture from (3):

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

natural fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials

5407 and 5408

Woven fabrics of man-made filament yarn:

 

 

Incorporating rubber thread

Manufacture from single yarn (3)

 

Other

Manufacture from 1 :

coir yarn,

natural fibres,

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  % of the ex-works price of the product

 

5501 to 5507

Man-made staple fibres

Manufacture from chemical materials or textile pulp

 

5508 to 5511

Yarn and sewing thread of man-made staple fibres

Manufacture from (3):

raw silk or silk waste, carded or combed or otherwise prepared for spinning,

natural fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials

5512 to 5516

Woven fabrics of man-made staple fibres:

 

 

Incorporating rubber thread

Manufacture from single yarn (3)

 

Other

Manufacture from 1 :

coir yarn,

natural fibres,

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  % of the ex-works price of the product

 

ex Chapter 56

Wadding, felt and non-wovens; special yarns; twine, cordage, ropes and cables and articles thereof; except for:

Manufacture from (3):

coir yarn,

natural fibres,

chemical materials or textile pulp, or

paper-making materials

5602

Felt, whether or not impregnated, coated, covered or laminated:

 

 

Needleloom felt

Manufacture from (3):

natural fibres,

chemical materials or textile pulp

However:

polypropylene filament of heading 5402,

polypropylene fibres of heading 5503 or 5506, or

polypropylene filament tow of heading 5501,

of which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 % of the ex-works price of the product

 

 

Other

Manufacture from (3):

natural fibres,

man-made staple fibres made from casein, or

chemical materials or textile pulp

5604

Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading 5404 or 5405, impregnated, coated, covered or sheathed with rubber or plastics:

 

 

Rubber thread and cord, textile covered

Manufacture from rubber thread or cord, not textile covered

 

Other

Manufacture from 1 :

natural fibres, not carded or combed or otherwise processed for spinning,

chemical materials or textile pulp, or

paper-making materials

5605

Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405, combined with metal in the form of thread, strip or powder or covered with metal

Manufacture from (3):

natural fibres,

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials

5606

Gimped yarn, and strip and the like of heading 5404 or 5405, gimped (other than those of heading 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn); loop wale-yarn

Manufacture from 1 :

natural fibres,

man-made staple fibres, not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials

Chapter 57

Carpets and other textile floor coverings:

 

 

Of needleloom felt

Manufacture from (3):

natural fibres,

chemical materials or textile pulp

However:

polypropylene filament of heading 5402,

polypropylene fibres of heading 5503 or 5506 or

polypropylene filament tow of heading 5501,

of which the denomination in all cases of a single filament or fibre is less than 9 decitex, may be used, provided that their total value does not exceed 40 % of the ex-works price of the product

Jute fabric may be used as a backing

 

 

Of other felt

Manufacture from (3):

natural fibres, not carded or combed or otherwise processed for spinning, or

chemical materials or textile pulp

Other

Manufacture from 1 :

coir yarn or jute yarn,

synthetic or artificial filament yarn,

natural fibres, or

man-made staple fibres, not carded or combed or otherwise processed for spinning

Jute fabric may be used as a backing

 

ex Chapter 58

Special woven fabrics; tufted textile fabrics; lace; tapestries; trimmings; embroidery; except for:

 

 

Incorporating rubber thread

Manufacture from single yarn (3)

 

Other

Manufacture from 1 :

natural fibres,

man-made staple fibres, not carded or combed or otherwise processed for spinning, or

chemical materials or textile pulp

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  % of the ex-works price of the product

 

5805

Hand-woven tapestries of the types Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up

Manufacture from materials of any heading, except that of the product

 

5810

Embroidery in the piece, in strips or in motifs

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

5901

Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations

Manufacture from yarn

 

5902

Tyre cord fabric of high tenacity yarn of nylon or other polyamides, polyesters or viscose rayon:

 

 

Containing not more than 90 % by weight of textile materials

Manufacture from yarn

 

Other

Manufacture from chemical materials or textile pulp

 

5903

Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902

Manufacture from yarn

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, rasing, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  % of the ex-works price of the product

 

5904

Linoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape

Manufacture from yarn (3)

 

5905

Textile wall coverings:

 

 

Impregnated, coated, covered or laminated with rubber, plastics or other materials

Manufacture from yarn

 

Other

Manufacture from (3):

coir yarn,

natural fibres,

man-made staple fibres, not carded or combed or otherwise processed for spinning or

chemical materials or textile pulp

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  % of the ex-works price of the product

 

5906

Rubberised textile fabrics, other than those of heading 5902:

 

 

Knitted or crocheted fabrics

Manufacture from (3):

natural fibres,

man-made staple fibres, not carded or combed or otherwise processed for spinning or

chemical materials or textile pulp

Other fabrics made of synthetic filament yarn, containing more than 90 % by weight of textile materials

Manufacture from chemical materials

 

Other

Manufacture from yarn

 

5907

Textile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio back-cloths or the like

Manufacture from yarn

or

Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, rasing, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47,5  % of the ex-works price of the product

 

5908

Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas mantle fabric therefor, whether or not impregnated:

 

 

Incandescent gas mantles, impregnated

Manufacture from tubular knitted gas-mantle fabric

 

Other

Manufacture from materials of any heading, except that of the product

 

5909 to 5911

Textile articles of a kind suitable for industrial use:

 

 

Polishing discs or rings other than of felt of heading 5911

Manufacture from yarn or waste fabrics or rags of heading 6310

 

Woven fabrics, of a kind commonly used in papermaking or other technical uses, felted or not, whether or not impregnated or coated, tubular or endless with single or multiple warp and/or weft, or flat woven with multiple warp and/or weft of heading 5911

Manufacture from (3):

coir yarn,

the following materials:

— —

yarn of polytetrafluoroethylene (8),

— —

yarn, multiple, of polyamide, coated impregnated or covered with a phenolic resin,

— —

yarn of synthetic textile fibres of aromatic polyamides, obtained by polycondensation of m-phenylenediamine and isophthalic acid,

— —

monofil of polytetrafluoroethylene 2 ,

 

 

 

— —

yarn of synthetic textile fibres of poly (p-phenylene terephthalamide),

— —

glass fibre yarn, coated with phenol resin and gimped with acrylic yarn (8),

— —

copolyester monofilaments of a polyester and a resin of terephthalic acid and 1,4 -cyclohexanediethanol and isophthalic acid,

— —

natural fibres,

— —

man-made staple fibres not carded or combed or otherwise processed for spinning, or

— —

chemical materials or textile pulp

 

 

Other

Manufacture from (3):

coir yarn,

natural fibres,

man-made staple fibres, not carded or combed or otherwise processed for spinning or

chemical materials or textile pulp

Chapter 60

Knitted or crocheted fabrics

Manufacture from 1 :

natural fibres,

man-made staple fibres, not carded or combed or otherwise processed for spinning or

chemical materials or textile pulp

Chapter 61

Articles of apparel and clothing accessories, knitted or crocheted:

 

 

Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form

Manufacture from yarn (3)  (9)

 

Other

Manufacture from 1 :

natural fibres,

man-made staple fibres, not carded or combed or otherwise processed for spinning or

chemical materials or textile pulp

ex Chapter 62

Articles of apparel and clothing accessories, not knitted or crocheted; except for:

Manufacture from yarn (3)  (9)

 

ex 6202, ex 6204, ex 6206, ex 6209 and ex 6211

Women’s, girls’ and babies’ clothing and clothing accessories for babies, embroidered

Manufacture from yarn 2

or

Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product 2

 

ex 6210 and ex 6216

Fire-resistant equipment of fabric covered with foil of aluminised polyester

Manufacture from yarn (9)

or

Manufacture from uncoated fabric, provided that the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product 1

 

6213 and 6214

Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like:

 

 

Embroidered

Manufacture from unbleached single yarn (3)  (9)

or

Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product 2

 

 

Other

Manufacture from unbleached single yarn (3)  (9)

or

Making up, followed by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of all the unprinted goods of headings 6213 and 6214 used does not exceed 47,5  % of the ex-works price of the product

 

6217

Other made up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212:

 

 

Embroidered

Manufacture from yarn (9)

or

Manufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product 1

 

Fire-resistant equipment of fabric covered with foil of aluminised polyester

Manufacture from yarn 1

or

Manufacture from uncoated fabric, provided that the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product 1

 

 

Interlinings for collars and cuffs, cut out

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Other

Manufacture from yarn (9)

 

ex Chapter 63

Other made-up textile articles; sets; worn clothing and worn textile articles; rags; except for:

Manufacture from materials of any heading, except that of the product

 

6301 to 6304

Blankets, travelling rugs, bed linen etc.; curtains etc.; other furnishing articles:

 

 

Of felt, of nonwovens

Manufacture from (3):

natural fibres, or

chemical materials or textile pulp

Other:

 

 

— —

Embroidered

Manufacture from unbleached single yarn (9)  (10)

or

Manufacture from unembroidered fabric (other than knitted or crocheted), provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product

 

— —

Other

Manufacture from unbleached single yarn 2 3

 

6305

Sacks and bags, of a kind used for the packing of goods

Manufacture from (3):

natural fibres,

man-made staple fibres, not carded or combed or otherwise processed for spinning or

chemical materials or textile pulp

6306

Tarpaulins, awnings and sunblinds; tents; sails for boats, sailboards or landcraft; camping goods:

 

 

Of nonwovens

Manufacture from 1  (9):

natural fibres, or

chemical materials or textile pulp

Other

Manufacture from unbleached single yarn 1 2

 

6307

Other made-up articles, including dress patterns

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

6308

Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes, or similar textile articles, put up in packings for retail sale

Each item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided that their total value does not exceed 15 % of the ex-works price of the set

 

ex Chapter 64

Footwear, gaiters and the like; parts of such articles; except for:

Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components of heading 6406

 

6406

Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable in-soles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof

Manufacture from materials of any heading, except that of the product

 

ex Chapter 65

Headgear and parts thereof; except for:

Manufacture from materials of any heading, except that of the product

 

6505

Hats and other headgear, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed; hair-nets of any material, whether or not lined or trimmed

Manufacture from yarn or textile fibres (9)

 

ex Chapter 66

Umbrellas, sun umbrellas, walking-sticks, seat-sticks, whips, riding-crops, and parts thereof; except for:

Manufacture from materials of any heading, except that of the product

 

6601

Umbrellas and sun umbrellas (including walking-stick umbrellas, garden umbrellas and similar umbrellas)

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

Chapter 67

Prepared feathers and down and articles made of feathers or of down; artificial flowers; articles of human hair

Manufacture from materials of any heading, except that of the product

 

ex Chapter 68

Articles of stone, plaster, cement, asbestos, mica or similar materials; except for:

Manufacture from materials of any heading, except that of the product

 

ex 6803

Articles of slate or of agglomerated slate

Manufacture from worked slate

 

ex 6812

Articles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonate

Manufacture from materials of any heading

 

ex 6814

Articles of mica, including agglomerated or reconstituted mica, on a support of paper, paperboard or other materials

Manufacture from worked mica (including agglomerated or reconstituted mica)

 

Chapter 69

Ceramic products

Manufacture from materials of any heading, except that of the product

 

ex Chapter 70

Glass and glassware; except for:

Manufacture from materials of any heading, except that of the product

 

ex 7003, ex 7004 and ex 7005

Glass with a non-reflecting layer

Manufacture from materials of heading 7001

 

7006

Glass of heading 7003, 7004 or 7005, bent, edge-worked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials:

 

 

Glass-plate substrates, coated with a dielectric thin film, and of a semiconductor grade in accordance with SEMII-standards (11)

Manufacture from non-coated glass-plate substrate of heading 7006

 

Other

Manufacture from materials of heading 7001

 

7007

Safety glass, consisting of toughened (tempered) or laminated glass

Manufacture from materials of heading 7001

 

7008

Multiple-walled insulating units of glass

Manufacture from materials of heading 7001

 

7009

Glass mirrors, whether or not framed, including rear-view mirrors

Manufacture from materials of heading 7001

 

7010

Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass

Manufacture from materials of any heading, except that of the product

or

Cutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product

 

7013

Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018)

Manufacture from materials of any heading, except that of the product

or

Cutting of glassware, provided that the total value of the uncut glassware used does not exceed 50 % of the ex-works price of the product

or

Hand-decoration (except silk-screen printing) of hand-blown glassware, provided that the total value of the hand-blown glassware used does not exceed 50 % of the ex-works price of the product

 

ex 7019

Articles (other than yarn) of glass fibres

Manufacture from:

uncoloured slivers, rovings, yarn or chopped strands, or

glass wool

ex Chapter 71

Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin; except for:

Manufacture from materials of any heading, except that of the product

 

ex 7101

Natural or cultured pearls, graded and temporarily strung for convenience of transport

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex 7102, ex 7103 and ex 7104

Worked precious or semi-precious stones (natural, synthetic or reconstructed)

Manufacture from unworked precious or semi-precious stones

 

7106, 7108 and 7110

Precious metals:

 

 

Unwrought

Manufacture from materials of any heading, except those of heading 7106, 7108 or 7110

or

Electrolytic, thermal or chemical separation of precious metals of heading 7106, 7108 or 7110

or

Alloying of precious metals of heading 7106, 7108 or 7110 with each other or with base metals

 

Semi-manufactured or in powder form

Manufacture from unwrought precious metals

 

ex 71 07, ex 7109 and ex 7111

Metals clad with precious metals, semi-manufactured

Manufacture from metals clad with precious metals, unwrought

 

7116

Articles of natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed)

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

7117

Imitation jewellery

Manufacture from materials of any heading, except that of the product

or

Manufacture from base metal parts, not plated or covered with precious metals, provided that the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex Chapter 72

Iron and steel; except for:

Manufacture from materials of any heading, except that of the product

 

7207

Semi-finished products of iron or non-alloy steel

Manufacture from materials of heading 7201, 7202, 7203, 7204, 7205 or 7206

 

7208 to 7216

Flat-rolled products, bars and rods, angles, shapes and sections of iron or non-alloy steel

Manufacture from ingots, other primary forms or semi-finished materials of heading 7206 or 7207

 

7217

Wire of iron or non-alloy steel

Manufacture from semi-finished materials of heading 7207

 

7218 91 and

7218 99

Semi-finished products of stainless steel

Manufacture from materials of heading 7201, 7202, 7203, 7204, 7205 or subheading 7218 10

 

7219 to 7222

Flat-rolled products, bars and rods, angles, shapes and sections of stainless steel

Manufacture from ingots or other primary forms or semi-finished materials of heading 7218

 

7223

Wire of stainless steel

Manufacture from semi-finished materials of heading 7218

 

7224 90

Semi-finished products of other alloy steel

Manufacture from materials of heading 7201, 7202, 7203, 7204, 7205 or subheading 7224 10

 

7225 to 7228

Flat-rolled products, bars and rods; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel

Manufacture from ingots, other primary forms or semi-finished materials of heading 7206, 7207, 7218 or 7224

 

7229

Wire of other alloy steel

Manufacture from semi-finished materials of heading 7224

 

ex Chapter 73

Articles of iron or steel; except for:

Manufacture from materials of any heading, except that of the product

 

ex 7301

Sheet piling

Manufacture from materials of heading 7206

 

7302

Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails

Manufacture from materials of heading 7206

 

7304, 7305 and 7306

Tubes, pipes and hollow profiles, of iron (other than cast iron) or steel

Manufacture from materials of heading 7206, 7207, 7218 or 7224

 

ex 7307

Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several parts

Turning, drilling, reaming, threading, deburring and sandblasting of forged blanks, provided that the total value of the forged blanks used does not exceed 35 % of the ex-works price of the product

 

7308

Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel

Manufacture from materials of any heading, except that of the product. However, welded angles, shapes and sections of heading 7301 may not be used

 

ex 7315

Skid chain

Manufacture in which the value of all the materials of heading 7315 used does not exceed 50 % of the ex-works price of the product

 

ex 7321

Cooking appliances and plate warmers:

 

 

For gas fuel or for both gas and other fuels

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

ex Chapter 74

Copper and articles thereof; except for:

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

7401

Copper mattes; cement copper (precipitated copper)

Manufacture from materials of any heading, except that of the product

 

7402

Unrefined copper; copper anodes for electrolytic refining

Manufacture from materials of any heading, except that of the product

 

7403

Refined copper and copper alloys, unwrought:

 

 

Refined copper

Manufacture from materials of any heading, except that of the product

 

Copper alloys and refined copper containing other elements

Manufacture from refined copper, unwrought, or waste and scrap of copper

 

7404

Copper waste and scrap

Manufacture from materials of any heading, except that of the product

 

7405

Master alloys of copper

Manufacture from materials of any heading, except that of the product

 

ex Chapter 75

Nickel and articles thereof; except for:

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

7501 to 7503

Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy; unwrought nickel; nickel waste and scrap

Manufacture from materials of any heading, except that of the product

 

ex Chapter 76

Aluminium and articles thereof; except for:

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

7601

Unwrought aluminium

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

or

Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium

 

7602

Aluminium waste or scrap

Manufacture from materials of any heading, except that of the product

 

ex 7616

Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminium

Manufacture:

from materials of any heading, except that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used; and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

Chapter 77

Reserved for possible future use in the HS

 

 

ex Chapter 78

Lead and articles thereof; except for:

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

7801

Unwrought lead:

 

 

Refined lead

Manufacture from “bullion” or “work” lead

 

Other

Manufacture from materials of any heading, except that of the product. However, waste and scrap of heading 7802 may not be used

 

7802

Lead waste and scrap

Manufacture from materials of any heading, except that of the product

 

ex Chapter 79

Zinc and articles thereof; except for:

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

7901

Unwrought zinc

Manufacture from materials of any heading, except that of the product. However, waste and scrap of heading 7902 may not be used

 

7902

Zinc waste and scrap

Manufacture from materials of any heading, except that of the product

 

ex Chapter 80

Tin and articles thereof; except for:

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

8001

Unwrought tin

Manufacture from materials of any heading, except that of the product. However, waste and scrap of heading 8002 may not be used

 

8002 and 8007

Tin waste and scrap; other articles of tin

Manufacture from materials of any heading, except that of the product

 

Chapter 81

Other base metals; cermets; articles thereof:

 

 

Other base metals, wrought; articles thereof

Manufacture in which the value of all the materials of the same heading as the product used does not exceed 50 % of the ex-works price of the product

 

Other

Manufacture from materials of any heading, except that of the product

 

ex Chapter 82

Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal; except for:

Manufacture from materials of any heading, except that of the product

 

8206

Tools of two or more of the headings 8202 to 8205, put up in sets for retail sale

Manufacture from materials of any heading, except those of headings 8202 to 8205. However, tools of headings 8202 to 8205 may be incorporated into the set, provided that their total value does not exceed 15 % of the ex-works price of the set

 

8207

Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning, or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

8208

Knives and cutting blades, for machines or for mechanical appliances

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 8211

Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208

Manufacture from materials of any heading, except that of the product. However, knife blades and handles of base metal may be used

 

8214

Other articles of cutlery (for example, hair clippers, butchers’ or kitchen cleavers, choppers and mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files)

Manufacture from materials of any heading, except that of the product. However, handles of base metal may be used

 

8215

Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware

Manufacture from materials of any heading, except that of the product. However, handles of base metal may be used

 

ex Chapter 83

Miscellaneous articles of base metal; except for:

Manufacture from materials of any heading, except that of the product

 

ex83 02

Other mountings, fittings and similar articles suitable for buildings, and automatic door closers

Manufacture from materials of any heading, except that of the product. However, other materials of heading 8302 may be used, provided that their total value does not exceed 20 % of the ex-works price of the product

 

ex 8306

Statuettes and other ornaments, of base metal

Manufacture from materials of any heading, except that of the product. However, other materials of heading 8306 may be used, provided that their total value does not exceed 30 % of the ex-works price of the product

 

ex Chapter 84

Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for:

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

ex 8401

Nuclear fuel elements

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

 

8402

Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8403 and ex 8404

Central heating boilers other than those of heading 8402 and auxiliary plant for central heating boilers

Manufacture from materials of any heading, except those of heading 8403 and 8404

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

8406

Steam turbines and other vapour turbines

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8407

Spark-ignition reciprocating or rotary internal combustion piston engines

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8408

Compression-ignition internal combustion piston engines (diesel or semi-diesel engines)

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8409

Parts suitable for use solely or principally with the engines of heading 8407 or 8408

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8411

Turbo-jets, turbo-propellers and other gas turbines

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8412

Other engines and motors

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

ex 8413

Rotary positive displacement pumps

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

ex 8414

Industrial fans, blowers and the like

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8415

Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8418

Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air conditioning machines of heading 8415:

 

 

Combined refrigerators-freezers, fitted with separate external doors, refrigerators household type, refrigerating or freezing display counters, cabinets, show-cases and the like, other refrigerators, freezers and other refrigerating or freezing equipment

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

Freezers and compression type units whose condensers are heat-exchangers

Manufacture:

from materials of any heading, except that of the product,

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

in which the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

 

Furniture designed to receive refrigerating or freezing equipment

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

Other parts of refrigerators

Manufacture in which the value of all the materials used does not exceed 35 % of the ex-works price of the product

 

ex 8419

Machines for wood, paper pulp, paper and paperboard industries

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8420

Calendering or other rolling machines, other than for metals or glass, and cylinders therefor

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8423

Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight operated counting or checking machines; weighing machine weights of all kinds

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8425 to 8428

Lifting, handling, loading or unloading machinery

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of heading 8431 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8429

Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers:

 

 

Road rollers

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

Other

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of heading 8431 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8430

Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowers

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of heading 8431 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

ex 8431

Parts suitable for use solely or principally with road rollers

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8439

Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8441

Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of the same heading as the product used does not exceed 25 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

ex 8443

Printers, for office machines (for example automatic data processing machines, word-processing machines, etc.)

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

8444 to 8447

Machines of these headings for use in the textile industry

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

ex 8448

Auxiliary machinery for use with machines of headings 8444 or 8445

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8452

Sewing machines, other than book-sewing machines of heading 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles:

 

 

Sewing machines (lock stitch only) with heads of a weight not exceeding 16 kg without motor or 17 kg with motor

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product,

the value of all the non-originating materials used in assembling the head (without motor) does not exceed the value of all the originating materials used, and

the thread-tension, crochet and zigzag mechanisms used are originating

Other

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8456 to 8466

Machine-tools and machines and their parts and accessories of headings 8456 to 8466, except for:

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

ex 8456 and ex 8466

water-jet cutting machines;

parts and accessories of water-jet cutting machines

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8469 to 8473

Office machines (such as typewriters, calculating machines, automatic data processing machines, duplicating machines, stapling machines) and parts and accessories thereof

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

8480

Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex 8481

Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure reducing valves and thermostatically controlled valves:

 

 

Other appliances

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8482

Ball or roller bearings

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8484

Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

ex 8486

Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electrodischarge, electrochemical, electron beam, ionic-beam or plasma arc processes and parts and accessories thereof

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

machine tools (including presses) for working metal by bending, folding, straightening, flattening, and parts and accessories thereof

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

 

machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass and parts and accessories thereof

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

Machine-tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

marking-out instruments which are pattern generating apparatus of a kind used for producing masks or reticles from photoresist coated substrates; parts and accessories thereof

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

moulds, injection or compression types

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

 

lifting, handling, loading or unloading machinery

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of heading 8431 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8487

Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, not specified or included elsewhere in this chapter

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

ex Chapter 85

Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for:

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8501

Electric motors and generators (excluding generating sets)

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of heading 8503 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8502

Electric generating sets and rotary converters

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of headings 8501 or 8503 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

ex 8504

Power supply units for automatic data-processing machines

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex 8509

Vacuum cleaners, including dry and wet vacuum cleaners; floor polishers

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8517

Telephone sets, including telephones for cellular networks or for other wireless networks

Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wireless network (such as a local or wide area network), other than transmission or reception apparatus of headings 8443, 8525, 8527 or 8528

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

ex 8518

Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; audio-frequency electric amplifiers; electric sound amplifier sets

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8519

Sound recording or sound reproducing apparatus

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8521

Video recording or reproducing apparatus, whether or not incorporating a video tuner

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8522

Parts and accessories suitable for use solely or principally with the apparatus of headings 8519 or 8521

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8523

Discs, tapes, solid-state non-volatile storage devices, “smart cards” and other media for the recording of sound or of other phenomena, whether or not recorded, including matrices and masters for the production of discs, but excluding products of Chapter 37.

 

 

 

Unrecorded discs, tapes, solid-state non-volatile storage devices and other media for the recording of sound or of other phenomena, but excluding products of Chapter 37;

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

 

recorded discs, tapes solid-state non-volatile storage devices and other media for the recording of sound or of other phenomena, but excluding products of Chapter 37

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of heading 8523 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

matrices and masters for the production of discs, but excluding products of Chapter 37;

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

proximity cards and “smart cards” with two or more electronic integrated circuits

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

“smart cards” with one electronic integrated circuit

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8525

transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus;

television cameras; digital cameras and video camera recorders;

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8526

Radar apparatus, radio navigational aid apparatus and radio remote control apparatus

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8527

Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8528

Monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus

 

 

 

monitors and projectors, not incorporating television reception apparatus, of a kind solely or principally used in an automatic data-processing system of heading 8471

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

other monitors and projectors, not incorporating television reception apparatus; Reception apparatus for television –, whether or not incorporating radio broadcast receivers or sound or video recording or reproducing apparatus;

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8529

Parts suitable for use solely or principally with the apparatus of headings 8525 to 8528:

 

 

Suitable for use solely or principally with video recording or reproducing apparatus

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

Suitable for use solely or principally with monitors and projectors, not incorporating television reception apparatus, of a kind solely or principally used in an automatic data-processing system of heading 8471

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

Other

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8535

Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits for a voltage exceeding 1000 V

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of heading 8538 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8536

Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits for a voltage not exceeding 1,000 Volt; connectors for optical fibres, optical fibre bundles or cables

 

 

 

Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits for a voltage not exceeding 1000 V

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of heading 8538 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

connectors for optical fibres, optical fibre bundles or cables

 

 

— —

of plastics

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

— —

of ceramics

Manufacture from materials of any heading, except that of the product

 

— —

of copper

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

8537

Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of heading 8538 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

ex 8541

Diodes, transistors and similar semi-conductor devices, except wafers not yet cut into chips

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

8542

Electronic integrated circuits

 

 

 

Monolithic integrated circuits

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

multichips which are parts of machinery or apparatus, not specified or included elsewhere in this chapter

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

 

other

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 % of the ex-works price of the product

 

8544

Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8545

Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8546

Electrical insulators of any material

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8547

Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating materials apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8548

Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, not specified or included elsewhere in this Chapter

 

 

 

Electronic microassemblies

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of headings 8541 and 8542 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

 

— —

other

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

ex Chapter 86

Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds; except for:

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8608

Railway or tramway track fixtures and fittings; mechanical (including electromechanical) signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

ex Chapter 87

Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof; except for:

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

8709

Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8710

Tanks and other armoured fighting vehicles, motorised, whether or not fitted with weapons, and parts of such vehicles

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8711

Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars:

 

 

With reciprocating internal combustion piston engine of a cylinder capacity:

 

 

— —

Not exceeding 50 cm3

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 20 % of the ex-works price of the product

— —

Exceeding 50 cm3

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

 

Other

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

ex 87 12

Bicycles without ball bearings

Manufacture from materials of any heading, except those of heading 8714

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8715

Baby carriages and parts thereof

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

8716

Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

ex Chapter 88

Aircraft, spacecraft, and parts thereof; except for:

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 8804

Rotochutes

Manufacture from materials of any heading, including other materials of heading 8804

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

8805

Aircraft launching gear; deck-arrestor or similar gear; ground flying trainers; parts of the foregoing articles

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

Chapter 89

Ships, boats and floating structures

Manufacture from materials of any heading, except that of the product. However, hulls of heading 8906 may not be used

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex Chapter 90

Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for:

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

9001

Optical fibres and optical fibre bundles; optical fibre cables other than those of heading 8544; sheets and plates of polarising material; lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9002

Lenses, prisms, mirrors and other optical elements, of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9004

Spectacles, goggles and the like, corrective, protective or other

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

ex 9005

Binoculars, monoculars, other optical telescopes, and mountings therefor, except for astronomical refracting telescopes and mountings therefor

Manufacture:

from materials of any heading, except that of the product,

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

in which the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

ex 9006

Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than electrically ignited flashbulbs

Manufacture:

from materials of any heading, except that of the product,

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

in which the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

9007

Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus

Manufacture:

from materials of any heading, except that of the product,

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

in which the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

9011

Compound optical microscopes, including those for photomicrography, cinephotomicrography or microprojection

Manufacture:

from materials of any heading, except that of the product,

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

in which the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

ex 9014

Other navigational instruments and appliances

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9015

Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9016

Balances of a sensitivity of 5 cg or better, with or without weights

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9017

Drawing, marking-out or mathematical calculating instruments (for example, drafting machines, pantographs, protractors, drawing sets, slide rules, disc calculators); instruments for measuring length, for use in the hand (for example, measuring rods and tapes, micrometers, callipers), not specified or included elsewhere in this chapter

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9018

Instruments and appliances used in medical, surgical, dental or veterinary sciences, including scintigraphic apparatus, other electro-medical apparatus and sight-testing instruments:

 

 

Dentists’ chairs incorporating dental appliances or dentists’ spittoons

Manufacture from materials of any heading, including other materials of heading 9018

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Other

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

9019

Mechano-therapy appliances; massage apparatus; psychological aptitude-testing apparatus; ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other therapeutic respiration apparatus

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

9020

Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product

9024

Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics)

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9025

Hydrometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psychrometers, recording or not, and any combination of these instruments

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9026

Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading 9014, 9015, 9028 or 9032

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

9027

Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9028

Gas, liquid or electricity supply or production meters, including calibrating meters therefor:

 

 

Parts and accessories

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

Other

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

9029

Revolution counters, production counters, taximeters, mileometers, pedometers and the like; speed indicators and tachometers, other than those of heading 9014 or 9015; stroboscopes

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9030

Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiations

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9031

Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9032

Automatic regulating or controlling instruments and apparatus

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9033

Parts and accessories (not specified or included elsewhere in this chapter) for machines, appliances, instruments or apparatus of Chapter 90

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

ex Chapter 91

Clocks and watches and parts thereof; except for:

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

9105

Other clocks

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

9109

Clock movements, complete and assembled

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

the value of all the non-originating materials used does not exceed the value of all the originating materials used

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

9110

Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements

Manufacture in which:

the value of all the materials used does not exceed 40 % of the ex-works price of the product, and

within the above limit, the value of all the materials of heading 9114 used does not exceed 10 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

9111

Watch cases and parts thereof

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

9112

Clock cases and cases of a similar type for other goods of this chapter, and parts thereof

Manufacture:

from materials of any heading, except that of the product, and

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product

9113

Watch straps, watch bands and watch bracelets, and parts thereof:

 

 

Of base metal, whether or not gold- or silver-plated, or of metal clad with precious metal

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

Other

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

Chapter 92

Musical Instruments; parts and accessories of such articles

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

 

Chapter 93

Arms and ammunition; parts and accessories thereof

Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product

 

ex Chapter 94

Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings; except for:

Manufacture from materials of any heading, except that of the product

Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product

ex 9401 and ex 9403

Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m2 or less

Manufacture from materials of any heading, except that of the product

or

Manufacture from cotton cloth already made up in a form ready for use with materials of heading 9401 or 9403, provided that:

the value of the cloth does not exceed 25 % of the ex-works price of the