Accept Refuse

EUR-Lex Access to European Union law

This document is an excerpt from the EUR-Lex website

Document 52014XC0225(01)

Commission communication in the framework of the implementation of Directive 2004/108/EC of the European Parliament and of the Council on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC (Publication of titles and references of harmonised standards under Union harmonisation legislation) Text with EEA relevance

OJ C 53, 25.2.2014, p. 4–25 (BG, ES, CS, DA, DE, ET, EL, EN, FR, HR, IT, LV, LT, HU, MT, NL, PL, PT, RO, SK, SL, FI, SV)

No longer in force, Date of end of validity: 16/01/2015; Replaced by 52015XC0116(03)

25.2.2014   

EN

Official Journal of the European Union

C 53/4


Commission communication in the framework of the implementation of Directive 2004/108/EC of the European Parliament and of the Council on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

(Text with EEA relevance)

2014/C 53/04

ESO (1)

Reference and title of the harmonised standard

(and reference document)

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard

Note 1

(1)

(2)

(3)

(4)

CEN

EN 617:2001+A1:2010

Continuous handling equipment and systems — Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

EN 617:2001

Note 2.1

Date expired

(30.6.2011)

CEN

EN 618:2002+A1:2010

Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

EN 618:2002

Note 2.1

Date expired

(30.6.2011)

CEN

EN 619:2002+A1:2010

Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads

EN 619:2002

Note 2.1

Date expired

(30.4.2011)

CEN

EN 620:2002+A1:2010

Continuous handling equipment and systems — Safety and EMC requirements for fixed belt conveyors for bulk materials

EN 620:2002

Note 2.1

Date expired

(30.6.2011)

CEN

EN 1155:1997

Building hardware — Electrically powered hold-open devices for swing doors — Requirements and test methods

 

 

CEN

EN 12015:2004

Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Emission

EN 12015:1998

Note 2.1

Date expired

(30.6.2006)

CEN

EN 12016:2013

Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity

EN 12016:2004+A1:2008

Note 2.1

28.2.2014

CEN

EN 12895:2000

Industrial trucks — Electromagnetic compatibility

 

 

CEN

EN 13241-1:2003+A1:2011

Industrial, commercial and garage doors and gates — Product standard — Part 1: Products without fire resistance or smoke control characteristics

EN 13241-1:2003

Note 2.1

Date expired

(31.10.2011)

CEN

EN 13309:2010

Construction machinery — Electromagnetic compatibility of machines with internal power supply

EN 13309:2000

Note 2.1

Date expired

(31.1.2011)

CEN

EN 14010:2003+A1:2009

Safety of machinery — Equipment for power driven parking of motor vehicles — Safety and EMC requirements for design, manufacturing, erection and commissioning stages

EN 14010:2003

Note 2.1

Date expired

(31.1.2010)

CEN

EN ISO 14982:2009

Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria (ISO 14982:1998)

EN ISO 14982:1998

Note 2.1

Date expired

(28.12.2009)

CEN

EN 16361:2013

Power operated pedestrian doors — Product standard, performance characteristics — Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics

 

 

Cenelec

EN 50065-1:2001

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 1: General requirements, frequency bands and electromagnetic disturbances

EN 50065-1:1991

+ A1:1992

+ A2:1995

+ A3:1996

Note 2.1

Date expired

(1.4.2003)

EN 50065-1:2001/A1:2010

Note 3

Date expired

(1.10.2012)

Cenelec

EN 50065-1:2011

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 1: General requirements, frequency bands and electromagnetic disturbances

EN 50065-1:2001

and its amendment

Note 2.1

21.3.2014

Cenelec

EN 50065-2-1:2003

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments

Relevant generic standard(s)

Note 2.3

Date expired

(1.10.2004)

EN 50065-2-1:2003/A1:2005

Note 3

Date expired

(1.7.2008)

EN 50065-2-1:2003/AC:2003

 

 

Cenelec

EN 50065-2-2:2003

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments

Relevant generic standard(s)

Note 2.3

Date expired

(1.10.2004)

EN 50065-2-2:2003/A1:2005

Note 3

Date expired

(1.7.2008)

EN 50065-2-2:2003/A1:2005/AC:2006

 

 

EN 50065-2-2:2003/AC:2003

 

 

Cenelec

EN 50065-2-3:2003

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors

Relevant generic standard(s)

Note 2.1

Date expired

(1.8.2004)

EN 50065-2-3:2003/A1:2005

Note 3

Date expired

(1.7.2008)

EN 50065-2-3:2003/AC:2003

 

 

Cenelec

EN 50083-2:2012

Cable networks for television signals, sound signals and interactive services — Part 2: Electromagnetic compatibility for equipment

EN 50083-2:2006

Note 2.1

Date expired

(21.6.2013)

Cenelec

EN 50121-1:2006

Railway applications — Electromagnetic compatibility — Part 1: General

Relevant generic standard(s)

Note 2.1

Date expired

(1.7.2009)

EN 50121-1:2006/AC:2008

 

 

Cenelec

EN 50121-2:2006

Railway applications — Electromagnetic compatibility — Part 2: Emission of the whole railway system to the outside world

Relevant generic standard(s)

Note 2.3

Date expired

(1.7.2009)

EN 50121-2:2006/AC:2008

 

 

Cenelec

EN 50121-3-1:2006

Railway applications — Electromagnetic compatibility — Part 3-1: Rolling stock — Train and complete vehicle

Relevant generic standard(s)

Note 2.3

Date expired

(1.7.2009)

EN 50121-3-1:2006/AC:2008

 

 

Cenelec

EN 50121-3-2:2006

Railway applications — Electromagnetic compatibility — Part 3-2: Rolling stock — Apparatus

Relevant generic standard(s)

Note 2.3

Date expired

(1.7.2009)

EN 50121-3-2:2006/AC:2008

 

 

Cenelec

EN 50121-4:2006

Railway applications — Electromagnetic compatibility — Part 4: Emission and immunity of the signalling and telecommunications apparatus

Relevant generic standard(s)

Note 2.3

Date expired

(1.7.2009)

EN 50121-4:2006/AC:2008

 

 

Cenelec

EN 50121-5:2006

Railway applications — Electromagnetic compatibility — Part 5: Emission and immunity of fixed power supply installations and apparatus

Relevant generic standard(s)

Note 2.3

Date expired

(1.7.2009)

EN 50121-5:2006/AC:2008

 

 

Cenelec

EN 50130-4:1995

Alarm systems — Part 4: Electromagnetic compatibility — Product family standard: Immunity requirements for components of fire, intruder and social alarm systems

Relevant generic standard(s)

Note 2.3

Date expired

(1.1.2001)

EN 50130-4:1995/A1:1998

Note 3

Date expired

(1.1.2001)

EN 50130-4:1995/A2:2003

Note 3

Date expired

(1.9.2007)

EN 50130-4:1995/A2:2003/AC:2003

 

 

Cenelec

EN 50130-4:2011

Alarm systems — Part 4: Electromagnetic compatibility — Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems

EN 50130-4:1995

and its amendments

Note 2.1

13.6.2014

Cenelec

EN 50148:1995

Electronic taximeters

BT(IT/NOT)12

Relevant generic standard(s)

Note 2.3

Date expired

(15.12.1995)

Cenelec

EN 50270:2006

Electromagnetic compatibility — Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

EN 50270:1999

Note 2.3

Date expired

(1.6.2009)

Cenelec

EN 50293:2000

Electromagnetic compatibility — Road traffic signal systems — Product standard

Relevant generic standard(s)

Note 2.3

Date expired

(1.4.2003)

Cenelec

EN 50293:2012

Road traffic signal systems — Electromagnetic compatibility

EN 50293:2000

Note 2.1

11.5.2015

Cenelec

EN 50295:1999

Low-voltage switchgear and controlgear — Controller and device interface systems — Actuator Sensor interface (AS-i)

Relevant generic standard(s)

Note 2.3

Date expired

(1.12.1999)

Cenelec

EN 50370-1:2005

Electromagnetic compatibility (EMC) — Product family standard for machine tools — Part 1: Emission

Relevant generic standard(s)

Note 2.3

Date expired

(1.2.2008)

Cenelec

EN 50370-2:2003

Electromagnetic compatibility (EMC) — Product family standard for machine tools — Part 2: Immunity

Relevant generic standard(s)

Note 2.3

Date expired

(1.11.2005)

Cenelec

EN 50412-2-1:2005

Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz — Part 2-1: Residential, commercial and industrial environment — Immunity requirements

Relevant generic standard(s)

Note 2.3

Date expired

(1.4.2008)

EN 50412-2-1:2005/AC:2009

 

 

Cenelec

EN 50428:2005

Switches for household and similar fixed electrical installations — Collateral standard — Switches and related accessories for use in home and building electronic systems (HBES)

Relevant generic standard(s)

Note 2.3

Date expired

(1.1.2008)

EN 50428:2005/A1:2007

Note 3

Date expired

(1.10.2010)

EN 50428:2005/A2:2009

Note 3

Date expired

(1.6.2012)

Cenelec

EN 50470-1:2006

Electricity metering equipment (a.c.) — Part 1: General requirements, tests and test conditions — Metering equipment (class indexes A, B and C)

Relevant generic standard(s)

Note 2.3

Date expired

(1.5.2009)

Cenelec

EN 50490:2008

Electrical installations for lighting and beaconing of aerodromes — Technical requirements for aeronautical ground lighting control and monitoring systems — Units for selective switching and monitoring of individual lamps

Relevant generic standard(s)

Note 2.3

Date expired

(1.4.2011)

Cenelec

EN 50491-5-1:2010

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) — Part 5-1: EMC requirements, conditions and test set-up

EN 50090-2-2:1996

+ A2:2007

Note 2.1

Date expired

(1.4.2013)

Cenelec

EN 50491-5-2:2010

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) — Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment

EN 50090-2-2:1996

+ A2:2007

Note 2.1

Date expired

(1.4.2013)

Cenelec

EN 50491-5-3:2010

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) — Part 5-3: EMC requirements for HBES/BACS used in industry environment

EN 50090-2-2:1996

+ A2:2007

Note 2.1

Date expired

(1.4.2013)

Cenelec

EN 50498:2010

Electromagnetic compatibility (EMC) — Product family standard for aftermarket electronic equipment in vehicles

Relevant generic standard(s)

Note 2.1

Date expired

(1.7.2013)

Cenelec

EN 50512:2009

Electrical installations for lighting and beaconing of aerodromes — Advanced Visual Docking Guidance Systems (A-VDGS)

Relevant generic standard(s)

Note 2.1

 

Cenelec

EN 50529-1:2010

EMC Network Standard — Part 1: Wire-line telecommunications networks using telephone wires

 

 

Cenelec

EN 50529-2:2010

EMC Network Standard — Part 2: Wire-line telecommunications networks using coaxial cables

 

 

Cenelec

EN 50550:2011

Power frequency overvoltage protective device for household and similar applications (POP)

 

 

EN 50550:2011/AC:2012

 

 

Cenelec

EN 50557:2011

Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses

 

 

Cenelec

EN 50561-1:2013

Power line communication apparatus used in low-voltage installations — Radio disturbance characteristics — Limits and methods of measurement — Part 1: Apparatus for in-home use

EN 55022:2010

+ EN 55032:2012

Note 2.1

 

Cenelec

EN 55011:2009

Industrial, scientific and medical equipment — Radio-frequency disturbance characteristics — Limits and methods of measurement

CISPR 11:2009 (Modified)

EN 55011:2007

+ A2:2007

Note 2.1

Date expired

(1.9.2012)

EN 55011:2009/A1:2010

CISPR 11:2009/A1:2010

Note 3

Date expired

(1.7.2013)

Cenelec

EN 55012:2007

Vehicles, boats and internal combustion engines — Radio disturbance characteristics — Limits and methods of measurement for the protection of off-board receivers

CISPR 12:2007

EN 55012:2002

+ A1:2005

Note 2.1

Date expired

(1.9.2010)

EN 55012:2007/A1:2009

CISPR 12:2007/A1:2009

Note 3

Date expired

(1.7.2012)

EN 55012 is applicable for giving presumption of conformity under directive 2004/108/EC for those vehicles, boats and internal combustion engine-driven devices that are not within the scope of directives 95/54/EC, 97/24/EC, 2000/2/EC or 2004/104/EC.

Cenelec

EN 55013:2001

Sound and television broadcast receivers and associated equipment — Radio disturbance characteristics — Limits and methods of measurement

CISPR 13:2001 (Modified)

EN 55013:1990

+ A12:1994

+ A13:1996

+ A14:1999

Note 2.1

Date expired

(1.9.2004)

EN 55013:2001/A1:2003

CISPR 13:2001/A1:2003

Note 3

Date expired

(1.4.2006)

EN 55013:2001/A2:2006

CISPR 13:2001/A2:2006

Note 3

Date expired

(1.3.2009)

Cenelec

EN 55013:2013

Sound and television broadcast receivers and associated equipment — Radio disturbance characteristics — Limits and methods of measurement

CISPR 13:2009 (Modified)

EN 55013:2001

and its amendments

Note 2.1

22.4.2016

Cenelec

EN 55014-1:2006

Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus — Part 1: Emission

CISPR 14-1:2005

EN 55014-1:2000

+ A1:2001

+ A2:2002

Note 2.1

Date expired

(1.9.2009)

EN 55014-1:2006/A1:2009

CISPR 14-1:2005/A1:2008

Note 3

Date expired

(1.5.2012)

EN 55014-1:2006/A2:2011

CISPR 14-1:2005/A2:2011

Note 3

16.8.2014

Cenelec

EN 55014-2:1997

Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus — Part 2: Immunity — Product family standard

CISPR 14-2:1997

EN 55104:1995

Note 2.1

Date expired

(1.1.2001)

EN 55014-2:1997/A1:2001

CISPR 14-2:1997/A1:2001

Note 3

Date expired

(1.12.2004)

EN 55014-2:1997/A2:2008

CISPR 14-2:1997/A2:2008

Note 3

Date expired

(1.9.2011)

EN 55014-2:1997/AC:1997

 

 

Cenelec

EN 55015:2006

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

CISPR 15:2005

EN 55015:2000

+ A1:2001

+ A2:2002

Note 2.1

Date expired

(1.9.2009)

EN 55015:2006/A1:2007

CISPR 15:2005/A1:2006

Note 3

Date expired

(1.5.2010)

EN 55015:2006/A2:2009

CISPR 15:2005/A2:2008

Note 3

Date expired

(1.3.2012)

Cenelec

EN 55015:2013

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

CISPR 15:2013 + IS1:2013 + IS2:2013

EN 55015:2006

and its amendments

Note 2.1

12.6.2016

Cenelec

EN 55020:2007

Sound and television broadcast receivers and associated equipment — Immunity characteristics — Limits and methods of measurement

CISPR 20:2006

EN 55020:2002

+ A1:2003

+ A2:2005

Note 2.1

Date expired

(1.12.2009)

EN 55020:2007/A11:2011

Note 3

Date expired

(1.1.2013)

Cenelec

EN 55022:2010

Information technology equipment — Radio disturbance characteristics — Limits and methods of measurement

CISPR 22:2008 (Modified)

EN 55022:2006

+ A1:2007

Date expired

(1.12.2013)

EN 55022:2010/AC:2011

 

 

Cenelec

EN 55024:2010

Information technology equipment — Immunity characteristics — Limits and methods of measurement

CISPR 24:2010

EN 55024:1998

+ A1:2001

+ A2:2003

Date expired

(1.12.2013)

Cenelec

EN 55032:2012

Electromagnetic compatibility of multimedia equipment — Emission requirements

CISPR 32:2012

EN 55013:2013

+ EN 55022:2010

+ EN 55103-1:2009

and its amendment

Note 2.1

5.3.2017

EN 55032:2012/AC:2013

 

 

Cenelec

EN 55103-1:2009

Electromagnetic compatibility — Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use — Part 1: Emissions

EN 55103-1:1996

Note 2.1

Date expired

(1.7.2012)

EN 55103-1:2009/A1:2012

Note 3

5.11.2015

Cenelec

EN 55103-2:2009

Electromagnetic compatibility — Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use — Part 2: Immunity

EN 55103-2:1996

Note 2.1

Date expired

(1.7.2012)

Cenelec

EN 60034-1:2010

Rotating electrical machines — Part 1: Rating and performance

IEC 60034-1:2010 (Modified)

Relevant generic standard(s)

Note 2.1

Date expired

(1.10.2013)

EN 60034-1:2010/AC:2010

 

 

Cenelec

EN 60204-31:1998

Safety of machinery — Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems

IEC 60204-31:1996 (Modified)

Relevant generic standard(s)

Note 2.3

Date expired

(1.6.2002)

EN 60204-31:1998/AC:2000

 

 

Cenelec

EN 60204-31:2013

Safety of machinery — Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems

IEC 60204-31:2013

EN 60204-31:1998

Note 2.1

28.5.2016

Cenelec

EN 60255-26:2013

Measuring relays and protection equipment — Part 26: Electromagnetic compatibility requirements

IEC 60255-26:2013

 

 

EN 60255-26:2013/AC:2013

 

 

Cenelec

EN 60439-1:1999

Low-voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially type-tested assemblies

IEC 60439-1:1999

EN 60439-1:1994

+ A11:1996

Note 2.1

Date expired

(1.8.2002)

Cenelec

EN 60669-2-1:2004

Switches for household and similar fixed electrical installations — Part 2-1: Particular requirements — Electronic switches

IEC 60669-2-1:2002 (Modified) + IS1:2011 + IS2:2012

EN 60669-2-1:2000

+ A2:2001

Note 2.3

Date expired

(1.7.2009)

EN 60669-2-1:2004/A1:2009

IEC 60669-2-1:2002/A1:2008 (Modified)

Note 3

Date expired

(1.4.2012)

EN 60669-2-1:2004/A12:2010

Note 3

Date expired

(1.6.2013)

EN 60669-2-1:2004/AC:2007

 

 

Cenelec

EN 60730-1:1995

Automatic electrical controls for household and similar use — Part 1: General requirements

IEC 60730-1:1993 (Modified)

 

 

EN 60730-1:1995/A11:1996

Note 3

Date expired

(1.1.1998)

EN 60730-1:1995/A17:2000

Note 3

Date expired

(1.10.2002)

EN 60730-1:1995/AC:2007

 

 

Cenelec

EN 60730-1:2000

Automatic electrical controls for household and similar use — Part 1: General requirements

IEC 60730-1:1999 (Modified)

EN 60730-1:1995

and its amendments

Note 2.1

 

EN 60730-1:2000/A1:2004

IEC 60730-1:1999/A1:2003 (Modified)

Note 3

 

EN 60730-1:2000/A16:2007

Note 3

Date expired

(1.6.2010)

EN 60730-1:2000/A2:2008

IEC 60730-1:1999/A2:2007 (Modified)

Note 3

Date expired

(1.6.2011)

EN 60730-1:2000/AC:2007

 

 

EN 60730-1:2000/A16:2007/AC:2010

 

 

Cenelec

EN 60730-1:2011

Automatic electrical controls for household and similar use — Part 1: General requirements

IEC 60730-1:2010 (Modified)

EN 60730-1:2000

and its amendments

Note 2.1

Date expired

(1.10.2013)

Cenelec

EN 60730-2-5:2002

Automatic electrical controls for household and similar use — Part 2-5: Particular requirements for automatic electrical burner control systems

IEC 60730-2-5:2000 (Modified)

 

 

EN 60730-2-5:2002/A1:2004

IEC 60730-2-5:2000/A1:2004 (Modified)

Note 3

Date expired

(1.12.2008)

EN 60730-2-5:2002/A11:2005

Note 3

Date expired

(1.12.2008)

EN 60730-2-5:2002/A2:2010

IEC 60730-2-5:2000/A2:2008 (Modified)

Note 3

Date expired

(1.3.2013)

Cenelec

EN 60730-2-6:2008

Automatic electrical controls for household and similar use — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

IEC 60730-2-6:2007 (Modified)

EN 60730-2-6:1995 + A1:1997

Date expired

(1.7.2011)

Cenelec

EN 60730-2-7:2010

Automatic electrical controls for household and similar use — Part 2-7: Particular requirements for timers and time switches

IEC 60730-2-7:2008 (Modified)

EN 60730-2-7:1991

+ A1:1997

Note 2.1

Date expired

(1.10.2013)

EN 60730-2-7:2010/AC:2011

 

 

Cenelec

EN 60730-2-8:2002

Automatic electrical controls for household and similar use — Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements

IEC 60730-2-8:2000 (Modified)

EN 60730-2-8:1995

+ A1:1997

+ A2:1997

Note 2.1

Date expired

(1.12.2008)

EN 60730-2-8:2002/A1:2003

IEC 60730-2-8:2000/A1:2002 (Modified)

Note 3

Date expired

(1.12.2008)

Cenelec

EN 60730-2-9:2010

Automatic electrical controls for household and similar use — Part 2-9: Particular requirements for temperature sensing controls

IEC 60730-2-9:2008 (Modified)

EN 60730-2-9:2002

+ A1:2003

+ A2:2005

Date expired

(1.11.2013)

Cenelec

EN 60730-2-14:1997

Automatic electrical controls for household and similar use — Part 2-14: Particular requirements for electric actuators

IEC 60730-2-14:1995 (Modified)

EN 60730-1:1995

and its amendments

Note 2.3

Date expired

(1.6.2004)

EN 60730-2-14:1997/A1:2001

IEC 60730-2-14:1995/A1:2001

Note 3

Date expired

(1.7.2008)

Cenelec

EN 60730-2-15:2010

Automatic electrical controls for household and similar use — Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls

IEC 60730-2-15:2008 (Modified)

EN 60730-2-18:1999

Note 2.1

Date expired

(1.3.2013)

Cenelec

EN 60870-2-1:1996

Telecontrol equipment and systems — Part 2: Operating conditions — Section 1: Power supply and electromagnetic compatibility

IEC 60870-2-1:1995

Relevant generic standard(s)

Note 2.3

Date expired

(1.9.1996)

Cenelec

EN 60945:2002

Maritime navigation and radiocommunication equipment and systems — General requirements — Methods of testing and required test results

IEC 60945:2002

EN 60945:1997

Note 2.1

Date expired

(1.10.2005)

Cenelec

EN 60947-1:2007

Low-voltage switchgear and controlgear — Part 1: General rules

IEC 60947-1:2007

EN 60947-1:2004

Note 2.1

Date expired

(1.7.2010)

EN 60947-1:2007/A1:2011

IEC 60947-1:2007/A1:2010

Note 3

Date expired

(1.1.2014)

Cenelec

EN 60947-2:2006

Low-voltage switchgear and controlgear — Part 2: Circuit-breakers

IEC 60947-2:2006

EN 60947-2:2003

Note 2.1

Date expired

(1.7.2009)

EN 60947-2:2006/A1:2009

IEC 60947-2:2006/A1:2009

Note 3

Date expired

(1.7.2012)

EN 60947-2:2006/A2:2013

IEC 60947-2:2006/A2:2013

Note 3

7.3.2016

Cenelec

EN 60947-3:2009

Low-voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

IEC 60947-3:2008

EN 60947-3:1999

+ A1:2001

Note 2.1

Date expired

(1.5.2012)

EN 60947-3:2009/A1:2012

IEC 60947-3:2008/A1:2012

Note 3

21.3.2015

Cenelec

EN 60947-4-1:2010

Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters — Electromechanical contactors and motor-starters

IEC 60947-4-1:2009

EN 60947-4-1:2001

+ A1:2002

+ A2:2005

Note 2.1

Date expired

(1.4.2013)

EN 60947-4-1:2010/A1:2012

IEC 60947-4-1:2009/A1:2012

Note 3

24.8.2015

Cenelec

EN 60947-4-2:2000

Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters — AC semiconductor motor controllers and starters

IEC 60947-4-2:1999

EN 60947-4-2:1996

+ A2:1998

Note 2.1

Date expired

(1.12.2002)

EN 60947-4-2:2000/A1:2002

IEC 60947-4-2:1999/A1:2001

Note 3

Date expired

(1.3.2005)

EN 60947-4-2:2000/A2:2006

IEC 60947-4-2:1999/A2:2006

Note 3

Date expired

(1.12.2009)

Cenelec

EN 60947-4-2:2012

Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters — AC semiconductor motor controllers and starters

IEC 60947-4-2:2011

EN 60947-4-2:2000

and its amendments

Note 2.1

22.6.2014

Cenelec

EN 60947-4-3:2000

Low-voltage switchgear and controlgear — Part 4-3: Contactors and motor-starters — AC semiconductor controllers and contactors for non-motor loads

IEC 60947-4-3:1999

Relevant generic standard(s)

Note 2.3

Date expired

(1.12.2002)

EN 60947-4-3:2000/A1:2006

IEC 60947-4-3:1999/A1:2006

Note 3

Date expired

(1.11.2009)

EN 60947-4-3:2000/A2:2011

IEC 60947-4-3:1999/A2:2011

Note 3

18.4.2014

Cenelec

EN 60947-5-1:2004

Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices

IEC 60947-5-1:2003

EN 60947-5-1:1997

+ A12:1999

Note 2.1

Date expired

(1.5.2007)

EN 60947-5-1:2004/A1:2009

IEC 60947-5-1:2003/A1:2009

Note 3

Date expired

(1.5.2012)

EN 60947-5-1:2004/AC:2005

 

 

Cenelec

EN 60947-5-2:2007

Low-voltage switchgear and controlgear — Part 5-2: Control circuit devices and switching elements — Proximity switches

IEC 60947-5-2:2007

EN 60947-5-2:1998

+ A2:2004

Note 2.1

Date expired

(1.11.2010)

EN 60947-5-2:2007/A1:2012

IEC 60947-5-2:2007/A1:2012

Note 3

1.11.2015

Cenelec

EN 60947-5-3:1999

Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements — Requirements for proximity devices with defined behaviour under fault conditions (PDF)

IEC 60947-5-3:1999

Relevant generic standard(s)

Note 2.1

Date expired

(1.5.2002)

EN 60947-5-3:1999/A1:2005

IEC 60947-5-3:1999/A1:2005

Note 3

Date expired

(1.3.2008)

Cenelec

EN 60947-5-6:2000

Low-voltage switchgear and controlgear — Part 5-6: Control circuit devices and switching elements — DC interface for proximity sensors and switching amplifiers (NAMUR)

IEC 60947-5-6:1999

EN 50227:1997

Note 2.1

Date expired

(1.1.2003)

Cenelec

EN 60947-5-7:2003

Low-voltage switchgear and controlgear — Part 5-7: Control circuit devices and switching elements — Requirements for proximity devices with analogue output

IEC 60947-5-7:2003

Relevant generic standard(s)

Note 2.1

Date expired

(1.9.2006)

Cenelec

EN 60947-5-9:2007

Low-voltage switchgear and controlgear — Part 5-9: Control circuit devices and switching elements — Flow rate switches

IEC 60947-5-9:2006

 

 

Cenelec

EN 60947-6-1:2005

Low-voltage switchgear and controlgear — Part 6-1: Multiple function equipment — Transfer switching equipment

IEC 60947-6-1:2005

EN 60947-6-1:1991

+ A2:1997

Note 2.1

Date expired

(1.10.2008)

Cenelec

EN 60947-6-2:2003

Low-voltage switchgear and controlgear — Part 6-2: Multiple function equipment — Control and protective switching devices (or equipment) (CPS)

IEC 60947-6-2:2002

EN 60947-6-2:1993

+ A1:1997

Note 2.1

Date expired

(1.9.2005)

EN 60947-6-2:2003/A1:2007

IEC 60947-6-2:2002/A1:2007

Note 3

Date expired

(1.3.2010)

Cenelec

EN 60947-8:2003

Low-voltage switchgear and controlgear — Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

IEC 60947-8:2003

Relevant generic standard(s)

Note 2.3

Date expired

(1.7.2006)

EN 60947-8:2003/A1:2006

IEC 60947-8:2003/A1:2006

Note 3

Date expired

(1.10.2009)

EN 60947-8:2003/A2:2012

IEC 60947-8:2003/A2:2011

Note 3

22.6.2014

Cenelec

EN 60974-10:2007

Arc welding equipment — Part 10: Electromagnetic compatibility (EMC) requirements

IEC 60974-10:2007

EN 60974-10:2003

Note 2.1

Date expired

(1.12.2010)

Cenelec

EN 61000-3-2:2006

Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic current emissions (equipment input current <= 16 A per phase)

IEC 61000-3-2:2005

EN 61000-3-2:2000

+ A2:2005

Note 2.1

Date expired

(1.2.2009)

EN 61000-3-2:2006/A1:2009

IEC 61000-3-2:2005/A1:2008

Note 3

Date expired

(1.7.2012)

EN 61000-3-2:2006/A2:2009

IEC 61000-3-2:2005/A2:2009

Note 3

Date expired

(1.7.2012)

Cenelec

EN 61000-3-3:2008

Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

IEC 61000-3-3:2008

EN 61000-3-3:1995

+ A1:2001

+ A2:2005

Date expired

(1.9.2011)

Cenelec

EN 61000-3-3:2013

Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

IEC 61000-3-3:2013

EN 61000-3-3:2008

Note 2.1

18.6.2016

Cenelec

EN 61000-3-11:2000

Electromagnetic compatibility (EMC) — Part 3-11: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems — Equipment with rated current <= 75 A and subject to conditional connection

IEC 61000-3-11:2000

Relevant generic standard(s)

Note 2.3

Date expired

(1.11.2003)

Cenelec

EN 61000-3-12:2005

Electromagnetic compatibility (EMC) — Part 3-12: Limits — Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase

IEC 61000-3-12:2004

Relevant generic standard(s)

Note 2.3

Date expired

(1.2.2008)

Cenelec

EN 61000-3-12:2011

Electromagnetic compatibility (EMC) — Part 3-12: Limits — Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase

IEC 61000-3-12:2011 + IS1:2012

EN 61000-3-12:2005

Note 2.1

16.6.2014

Cenelec

EN 61000-6-1:2007

Electromagnetic compatibility (EMC) — Part 6-1: Generic standards — Immunity for residential, commercial and light-industrial environments

IEC 61000-6-1:2005

EN 61000-6-1:2001

Note 2.1

Date expired

(1.12.2009)

Cenelec

EN 61000-6-2:2005

Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity for industrial environments

IEC 61000-6-2:2005

EN 61000-6-2:2001

Note 2.1

Date expired

(1.6.2008)

EN 61000-6-2:2005/AC:2005

 

 

Cenelec

EN 61000-6-3:2007

Electromagnetic compatibility (EMC) — Part 6-3: Generic standards — Emission standard for residential, commercial and light-industrial environments

IEC 61000-6-3:2006

EN 61000-6-3:2001

+ A11:2004

Note 2.1

Date expired

(1.12.2009)

EN 61000-6-3:2007/A1:2011

IEC 61000-6-3:2006/A1:2010

Note 3

Date expired

(12.1.2014)

EN 61000-6-3:2007/A1:2011/AC:2012

 

 

Cenelec

EN 61000-6-4:2007

Electromagnetic compatibility (EMC) — Part 6-4: Generic standards — Emission standard for industrial environments

IEC 61000-6-4:2006

EN 61000-6-4:2001

Note 2.1

Date expired

(1.12.2009)

EN 61000-6-4:2007/A1:2011

IEC 61000-6-4:2006/A1:2010

Note 3

Date expired

(12.1.2014)

Cenelec

EN 61008-1:2004

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) — Part 1: General rules

IEC 61008-1:1996 (Modified) + A1:2002 (Modified)

EN 61008-1:1994

+ A2:1995

+ A14:1998

Note 2.1

Date expired

(1.4.2009)

EN 61008-1:2004/A12:2009

Note 3

Date expired

(1.12.2011)

Cenelec

EN 61008-1:2012

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) — Part 1: General rules

IEC 61008-1:2010 (Modified)

EN 61008-1:2004

and its amendment

Note 2.1

18.6.2017

Cenelec

EN 61009-1:2004

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) — Part 1: General rules

IEC 61009-1:1996 (Modified) + A1:2002 (Modified)

EN 61009-1:1994

+ A1:1995

+ A14:1998

Note 2.1

Date expired

(1.4.2009)

EN 61009-1:2004/A13:2009

Note 3

Date expired

(1.12.2011)

EN 61009-1:2004/A12:2009

Note 3

Date expired

(1.12.2011)

EN 61009-1:2004/AC:2006

 

 

Cenelec

EN 61009-1:2012

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) — Part 1: General rules

IEC 61009-1:2010 (Modified)

EN 61009-1:2004

and its amendments

Note 2.1

18.6.2017

Cenelec

EN 61131-2:2007

Programmable controllers — Part 2: Equipment requirements and tests

IEC 61131-2:2007

EN 61131-2:2003

Note 2.1

Date expired

(1.8.2010)

Cenelec

EN 61204-3:2000

Low voltage power supplies, d.c. output — Part 3: Electromagnetic compatibility (EMC)

IEC 61204-3:2000

Relevant generic standard(s)

Note 2.3

Date expired

(1.11.2003)

Cenelec

EN 61326-1:2006

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 1: General requirements

IEC 61326-1:2005

EN 61326:1997

+ A1:1998

+ A2:2001

+ A3:2003

Date expired

(1.2.2009)

Cenelec

EN 61326-1:2013

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 1: General requirements

IEC 61326-1:2012

EN 61326-1:2006

Note 2.1

14.8.2015

Cenelec

EN 61326-2-1:2006

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-1: Particular requirements — Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

IEC 61326-2-1:2005

EN 61326:1997

+ A1:1998

+ A2:2001

+ A3:2003

Date expired

(1.2.2009)

Cenelec

EN 61326-2-1:2013

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-1: Particular requirements — Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

IEC 61326-2-1:2012

EN 61326-2-1:2006

Note 2.1

6.11.2015

Cenelec

EN 61326-2-2:2006

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-2: Particular requirements — Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

IEC 61326-2-2:2005

EN 61326:1997

+ A1:1998

+ A2:2001

+ A3:2003

Date expired

(1.2.2009)

Cenelec

EN 61326-2-2:2013

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-2: Particular requirements — Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

IEC 61326-2-2:2012

EN 61326-2-2:2006

Note 2.1

6.11.2015

Cenelec

EN 61326-2-3:2006

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-3: Particular requirements — Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

IEC 61326-2-3:2006

EN 61326:1997

+ A1:1998

+ A2:2001

+ A3:2003

Date expired

(1.8.2009)

Cenelec

EN 61326-2-3:2013

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-3: Particular requirements — Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

IEC 61326-2-3:2012

EN 61326-2-3:2006

Note 2.1

14.8.2015

Cenelec

EN 61326-2-4:2006

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-4: Particular requirements — Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

IEC 61326-2-4:2006

EN 61326:1997

+ A1:1998

+ A2:2001

+ A3:2003

Date expired

(1.11.2009)

Cenelec

EN 61326-2-4:2013

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-4: Particular requirements — Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

IEC 61326-2-4:2012

EN 61326-2-4:2006

Note 2.1

14.8.2015

Cenelec

EN 61326-2-5:2006

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-5: Particular requirements — Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2

IEC 61326-2-5:2006

EN 61326:1997

+ A1:1998

+ A2:2001

+ A3:2003

Date expired

(1.9.2009)

Cenelec

EN 61326-2-5:2013

Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-5: Particular requirements — Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1

IEC 61326-2-5:2012

EN 61326-2-5:2006

Note 2.1

6.11.2015

Cenelec

EN 61439-1:2009

Low-voltage switchgear and controlgear assemblies — Part 1: General rules

IEC 61439-1:2009 (Modified)

EN 60439-1:1999

Note 2.1

1.11.2014

EN 61439-1:2009/AC:2013

 

 

EN 61439-1:2009 does not give presumption of conformity without another part of the standard.

Cenelec

EN 61439-1:2011

Low-voltage switchgear and controlgear assemblies — Part 1: General rules

IEC 61439-1:2011

EN 61439-1:2009

Note 2.1

23.9.2014

Cenelec

EN 61439-2:2009

Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies

IEC 61439-2:2009

 

 

Cenelec

EN 61439-2:2011

Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies

IEC 61439-2:2011

EN 61439-2:2009

Note 2.1

23.9.2014

Cenelec

EN 61439-3:2012

Low-voltage switchgear and controlgear assemblies — Part 3: Distribution boards intended to be operated by ordinary persons (DBO)

IEC 61439-3:2012

 

 

Cenelec

EN 61439-4:2013

Low-voltage switchgear and controlgear assemblies — Part 4: Particular requirements for assemblies for construction sites (ACS)

IEC 61439-4:2012

 

 

Cenelec

EN 61439-5:2011

Low-voltage switchgear and controlgear assemblies — Part 5: Assemblies for power distribution in public networks

IEC 61439-5:2010

 

 

Cenelec

EN 61439-6:2012

Low-voltage switchgear and controlgear assemblies — Part 6: Busbar trunking systems (busways)

IEC 61439-6:2012

 

 

Cenelec

EN 61543:1995

Residual current-operated protective devices (RCDs) for household and similar use — Electromagnetic compatibility

IEC 61543:1995

Relevant generic standard(s)

Note 2.3

Date expired

(4.7.1998)

EN 61543:1995/A11:2003

Note 3

Date expired

(1.3.2007)

EN 61543:1995/A12:2005

Note 3

Date expired

(1.3.2008)

EN 61543:1995/A2:2006

IEC 61543:1995/A2:2005

Note 3

Date expired

(1.12.2008)

EN 61543:1995/AC:1997

 

 

EN 61543:1995/A11:2003/AC:2004

 

 

Cenelec

EN 61547:2009

Equipment for general lighting purposes — EMC immunity requirements

IEC 61547:2009 + IS1:2013

EN 61547:1995

+ A1:2000

Date expired

(1.7.2012)

Cenelec

EN 61557-12:2008

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 12: Performance measuring and monitoring devices (PMD)

IEC 61557-12:2007

 

 

Cenelec

EN 61800-3:2004

Adjustable speed electrical power drive systems — Part 3: EMC requirements and specific test methods

IEC 61800-3:2004

EN 61800-3:1996

+ A11:2000

Note 2.1

Date expired

(1.10.2007)

EN 61800-3:2004/A1:2012

IEC 61800-3:2004/A1:2011

Note 3

19.12.2014

Cenelec

EN 61812-1:1996

Specified time relays for industrial use — Part 1: Requirements and tests

IEC 61812-1:1996

 

 

EN 61812-1:1996/A11:1999

Note 3

Date expired

(1.1.2002)

EN 61812-1:1996/AC:1999

 

 

Cenelec

EN 61812-1:2011

Time relays for industrial and residential use — Part 1: Requirements and tests

IEC 61812-1:2011

EN 61812-1:1996

and its amendment

Note 2.1

29.6.2014

Cenelec

EN 62020:1998

Electrical accessories — Residual current monitors for household and similar uses (RCMs)

IEC 62020:1998

 

 

EN 62020:1998/A1:2005

IEC 62020:1998/A1:2003 (Modified)

Note 3

Date expired

(1.3.2008)

Cenelec

EN 62026-1:2007

Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 1: General rules

IEC 62026-1:2007

Relevant generic standard(s)

Note 2.1

Date expired

(1.9.2010)

EN 62026-1:2007 does not give presumption of conformity without another part of the standard.

Cenelec

EN 62026-2:2013

Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 2: Actuator sensor interface (AS-i)

IEC 62026-2:2008 (Modified)

EN 50295:1999

Note 2.1

3.12.2015

Cenelec

EN 62026-3:2009

Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 3: DeviceNet

IEC 62026-3:2008

Relevant generic standard(s)

Note 2.1

 

Cenelec

EN 62026-7:2013

Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 7: CompoNet

IEC 62026-7:2010 (Modified)

 

 

Cenelec

EN 62040-2:2006

Uninterruptible power systems (UPS) — Part 2: Electromagnetic compatibility (EMC) requirements

IEC 62040-2:2005

EN 50091-2:1995

Note 2.1

Date expired

(1.10.2008)

EN 62040-2:2006/AC:2006

 

 

Cenelec

EN 62052-11:2003

Electricity metering equipment (AC) — General requirements, tests and test conditions — Part 11: Metering equipment

IEC 62052-11:2003

Relevant generic standard(s)

Note 2.3

Date expired

(1.3.2006)

EN 62052-11:2003 does not give presumption of conformity without a part of the EN 62053 series.

Cenelec

EN 62052-21:2004

Electricity metering equipment (a.c.) — General requirements, tests and test conditions — Part 21: Tariff and load control equipment

IEC 62052-21:2004

EN 61037:1992

+ A1:1996

+ A2:1998

+ EN 61038:1992

+ A1:1996

+ A2:1998

Note 2.1

Date expired

(1.7.2007)

EN 62052-21:2004 does not give presumption of conformity without a part of the EN 62054 series.

Cenelec

EN 62053-11:2003

Electricity metering equipment (a.c.) — Particular requirements — Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

IEC 62053-11:2003

EN 60521:1995

Note 2.1

Date expired

(1.3.2006)

Cenelec

EN 62053-21:2003

Electricity metering equipment (a.c.) — Particular requirements — Part 21: Static meters for active energy (classes 1 and 2)

IEC 62053-21:2003

EN 61036:1996

+ A1:2000

Note 2.1

Date expired

(1.3.2006)

Cenelec

EN 62053-22:2003

Electricity metering equipment (a.c.) — Particular requirements — Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)

IEC 62053-22:2003

EN 60687:1992

Note 2.1

Date expired

(1.3.2006)

Cenelec

EN 62053-23:2003

Electricity metering equipment (a.c.) — Particular requirements — Part 23: Static meters for reactive energy (classes 2 and 3)

IEC 62053-23:2003

EN 61268:1996

Note 2.1

Date expired

(1.3.2006)

Cenelec

EN 62054-11:2004

Electricity metering (a.c.) — Tariff and load control — Part 11: Particular requirements for electronic ripple control receivers

IEC 62054-11:2004

EN 61037:1992

+ A1:1996

+ A2:1998

Note 2.1

Date expired

(1.7.2007)

Cenelec

EN 62054-21:2004

Electricity metering (a.c.) — Tariff and load control — Part 21: Particular requirements for time switches

IEC 62054-21:2004

EN 61038:1992

+ A1:1996

+ A2:1998

Note 2.1

Date expired

(1.7.2007)

Cenelec

EN 62135-2:2008

Resistance welding equipment — Part 2: Electromagnetic compatibility (EMC) requirements

IEC 62135-2:2007

EN 50240:2004

Note 2.1

Date expired

(1.2.2011)

Cenelec

EN 62310-2:2007

Static transfer systems (STS) — Part 2: Electromagnetic compatibility (EMC) requirements

IEC 62310-2:2006 (Modified)

Relevant generic standard(s)

Note 2.1

Date expired

(1.9.2009)

Cenelec

EN 62423:2009

Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs)

IEC 62423:2007 (Modified)

 

 

Cenelec

EN 62423:2012

Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses

IEC 62423:2009 (Modified)

EN 62423:2009

Note 2.1

19.6.2017

Cenelec

EN 62606:2013

General requirements for arc fault detection devices

IEC 62606:2013 (Modified)

 

 

ETSI

EN 300 386 V1.4.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

EN 300 386 V1.3.3

Note 2.1

Date expired

(31.7.2011)

ETSI

EN 300 386 V1.5.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

EN 300 386 V1.4.1

Note 2.1

Date expired

(31.1.2014)

ETSI

EN 300 386 V1.6.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

EN 300 386 V1.5.1

Note 2.1

30.11.2015

ETSI

EN 301 489-1 V1.9.2

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

EN 301 489-1 V1.8.1

Note 2.1

Date expired

(30.6.2013)

ETSI

EN 301 489-34 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones

 

 

ETSI

EN 301 489-34 V1.3.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones

EN 301 489-34 V1.1.1

Note 2.1

28.2.2014

ETSI

EN 301 489-34 V1.4.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones

EN 301 489-34 V1.3.1

Note 2.1

28.2.2015

Note 1:

Generally the date of cessation of presumption of conformity will be the date of withdrawal (‘dow’), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 2.1:

The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.2:

The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.3:

The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

Note 3:

In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

NOTE:

Any information concerning the availability of the standards can be obtained either from the European standardisation organisations or from the national standardisation bodies the list of which is published in the Official Journal of the European Union according to Article 27 of the Regulation (EU) No 1025/2012 (2).

Standards are adopted by the European standardisation organisations in English (CEN and Cenelec also publish in French and German). Subsequently, the titles of the standards are translated into all other required official languages of the European Union by the national standardisation bodies. The European Commission is not responsible for the correctness of the titles which have been presented for publication in the Official Journal.

References to Corrigenda ‘…/AC:YYYY’ are published for information only. A Corrigendum removes printing, linguistic or similar errors from the text of a standard and may relate to one or more language versions (English, French and/or German) of a standard as adopted by a European standardisation organisation.

Publication of the references in the Official Journal of the European Union does not imply that the standards are available in all the official languages of the European Union.

This list replaces all the previous lists published in the Official Journal of the European Union. The European Commission ensures the updating of this list.

More information about harmonised standards and other European standards on the Internet at

http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/index_en.htm


(1)  ESO: European standardisation organisation:

CEN: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25500811; Fax +32 25500819 (http://www.cen.eu)

Cenelec: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25196871; Fax +32 25196919 (http://www.cenelec.eu)

ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE, Tel. +33 492944200; Fax +33 493654716 (http://www.etsi.eu)

(2)  OJ L 316, 14.11.2012, p. 12.


Top